Upload
others
View
8
Download
0
Embed Size (px)
Citation preview
the complete control solution for Motorized FlexShades® Compatible Components
Part Number
User
Inpu
t Dev
ices Single Zone Wired Wall Switch (S1) C112.161
Dual Zone Wired Wall Switch (S2) C112.162
Handheld RF Remote (RFR) C156.270
IR Transmitter and Receiver (IRT/R) 121227
IR Transmitter (IRT) 121228
Netw
ork
Devi
ces
Network Device Connector (NDC) C156.267
Wireless Network Gateway (WNG) C156.268
A\V Gateway (AVG) C156.269
Sensor/Scheduler Interface (SSI) C156.272
SSI w/ Automated glare control (SSI+) C156.304
Contact Closure Interface (CCI) C156.273
Central Network Controller (CNC) C156.271
IP Gateway (IPG) C156.305
3-Port Network Device Connector (NDC3) C156.311
Mot
or
Cont
rol 1 Motor Controller w/enclosure (1MC) C156.285SA
1 Motor Controller (1MC) C156.285
4 Motor Controller w/enclosure (4MC) C156.286SA
Tool
s Motor Limit Tool (MLT) C202.047
IntelliFlex I/O Installation Kit (IO-Kit) C504.206SA
For info on other I/O compatible products, visit draperinc.com.
For low voltage wiring requirements, Draper recommends consulting with a
professional low voltage electrical contractor. All low voltage wiring must be run separately from line voltage wiring.
OverviewThe IntelliFlex I/O Sensor / Scheduler Interface allows up to 4 sensors to be added to an IntelliFlex I/O network.
Includes built-in support for brightness, wind and precipitation sensors as well as pyranometers.
Also provided support for up to 8 scheduled override events. Configuration is done using on-board buttons and LCD display.
Features• Supports 0-10V, 4-20mA, photodiode and pulse sensors
• Simple configuration using built-in buttons and LCD display
• Scheduled events can be configured to run on any combination of days of the week
• External power input for sensors provides support for any sensor power requirements
by SSI - Sensor/Scheduler Interface
Technical Specifications - Sensor/Scheduler Interface
Material: ABS plastic
Operating Temp: Ambient
Dimensions: 4 7/8" x 3" x 1" 124 x 76 x 25mm
Mounting: Mounting Hardware Provided
Shipping Weight: 1 lb. 0.45 kg
Indoor Use Only
NDC Required (included)
Optional Power Supply: (C103.154)
C156.272
User
Inpu
t Dev
ices
Netw
ork
Dev
ices
Mot
or C
ontro
lTo
ols &
Sens
ors
SSI+ with Automated Glare ControlSensor / Scheduler Interface (SSI) Internal Sun Sensor
External Brightness Sensor
Wind Speed Sensor
Motorized FlexShade® A/C 1MCMotorized FlexShade® A/C 4MC
Motorized FlexShade® A/C
Network Device Connector (NDC)
NDC
NDC NDC
NDC NDC
NDC NDC NDC
A\V Gateway
Wireless Network Gateway
Central Network Controller
IPGateway
Contact Closure Interface
Motor Limit Tool
Required for use with Wireless RF Remote
Wired Dual Zone SwitchWired Single Zone Switch
Building Management System IntegrationAllows IntelliFlex I/O shading systems to integrate via BACnet IP. Acts as a BMS integration option for I/O systems. They also act as a router between the control network and a building IP network, allowing for communication between networks as well as IP integration with other systems.
3rd Party Control IntegrationRequires A\V GatewayThe AV Gateway is used to integrate with 3rd party control systems such as Lutron, Crestron and others.
Requires WNG
Handheld RF Remote
CAT5
MOTOR LEADS
SENSOR WIRINGShade Control System Overview
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999
© 2021 All Rights Reserved |
Draper, Inc. | 411 S. Pearl St. Spiceland, IN 47385 draperinc.com | 765.987.7999 | 800.238.7999
© 2021 All Rights Reserved |
DATA SHEET TECHNICAL INFO
C156.272_SSI_IO_TechSpec21-R