Upload
dangtuong
View
350
Download
10
Embed Size (px)
Citation preview
www.NvisTech.com
Product Selection Guide - ElectricalWe are an ISO 9001:2008 Certified Organization, engaged in offering a wide range of finest Electrical products that is made with
quality-proven machines & components, incorporates with latest technology. Electrical products designed and supplied by us has
been used in IIT’s, NIT's, Engineering Colleges, Polytechnics Colleges and ITI’s as well as Industry worldwide.
Our Electrical Control boards are made using high grade Fibreglass reinforced Plastic (FRP) material to provide strength and
durability to the finished structure and looks attractive at the same time. We are the first one to adopt LCD to display entire necessary
electrical parameters in a single frame with an option of using digital measuring instruments either, to provide high accuracy
measurements.
With our strong infra structural, development facilities, in-depth knowledge and experience in the domain, we also offer customized
Electrical products starts from basic to advance level Engineering as per our client's requirement at competitive prices to meet their
demands and fulfill syllabus. We ensure timely delivery, prompt and reliable after sales services and transparent business dealings.
�Transformer based DC Supply (10A)
�Fixed as well as Variable DC Supply
�Over Current Protection
Suitable for Electrical Machine Laboratory, Compatible for DC Machine upto 2HP etc.
Nvis 725 - DC Supply
Nvis 725A - Advance DC Supply
Suitable for Electrical Machine Laboratory, Compatible forDC Machine upto 3HP etc.
�Over Current Protection
�Field Failure Protection
�Thyristor Based DC Supply
(15A)
*Also available 25A & 50A DC Power Supply
Nvis 726 - AC / DC Load
�Provided fans for heat
suppression
�Resistive (bulb) Load
Suitable to conduct Load Test on Machines upto 1.2kW etc.
Nvis 7004 - Single Phase Transformer Lab
�Inbuilt Single Phase Variac
�Flexibility to configure step up, step
down and isolation transformer
To study Polarity Test, Transformation RatioTest, Open Circuit and Short Circuit Test,Measurement of efficiency and voltageregulation of Single Phase Transformer etc.
Nvis 7203 - Three Phase AC Voltage Controller
Study of Three Phase Half Wave and Full Wave AC Voltage Controller with R and RL Load etc.
�Inbuilt DC Power Supply
�Flexibility to configure Half and Full
Bridge Controller Circuit
�Equipped with fixed value
of R and L Load
Nvis 7000 - Electrical Safety Demonstrator
To study the basic concepts of Earthing, Fuse and MCB etc.
� Designed considering all safety standards
� Exclusive design and attractive presentation of each block
� Represents many essential safety precautions
Nvis 7001 - Three Phase Lab
Study of Three phase Star and Delta Configurations, Importance of Balanced and Unbalanced load etc.
� Test points are provided to measure line and phase
parameters
�Hands-on Practice
�Stand alone operation
Nvis 7202 - Three Phase Controlled Rectifier
Study of Three Phase Firing Circuit, Three Phase Half Wave, Semi and Full WaveRectifier with R, RL and Motor Load etc.
�Inbuilt DC Power Supply
� Flexibility to configure Half, Semi and Bridge Rectifer Circuit
� Equipped with firing circuit to study
and analyse waveforms
Nvis 7009 - RLC Resonance Trainer
It provides complete learning content for both series and parallel resonance
Nvis 7010 - Scott Connection Demonstrator
To study about Conversion of Three Phase to Two Phase with proper phase displacement etc.
�Specially designed tapped
transformers
�Test points provided to
analysis waveforms
Nvis 7011 - Sumpner’s Test of Two Single Phase Transformer
Measurement of Core and Copper Loss, Efficiency and Voltage Regulation at different load conditions etc.
Nvis 7012 - Parallel Operation of Two Single Phase Transformer
�Two identical Single Phase
Transformer with special tapping
�Facility to use fixed and variable
load externally
Nvis 7005 - Power Measurement by Two WattmeterMethod
Measurement of Power Factor, Active, Reactive and Apparent Power inThree Phase Circuit using R and RL Load etc.
�Inbuilt inductive load
�Facility to configure star and
delta load
Nvis 7006 - Three Phase Induction Motor Lab
To study Running and Reversing Phenomenon, No Load Test, Load Test, Block Rotor Test of Three Phase Squirrel Cage Induction Machine etc
�Machine with mechanical loading arrangement
�Brake drum/pulley with heat suppression facility
Nvis 7008 - DC Machine Lab-II
To study Operational Working, Load Characteristics, Speed Control of Motor etc.
�Machine with mechanical loading arrangement
�Heavy duty base/channel
�Brake drum/pulley with heat suppression
facility
To study Parallel Operation of Two Single Phase Transformer with equal and unequal voltage ratio etc.
Nvis 7007 - DC Machine Lab-I
To study Open Circuit Characterisitc, Load Characteristics, Speed Control ofMachine etc.
�Flexible shaft coupling
arrangement
�Machine with class “B” insulation
�Electrical loading facility
�LCD Voltmeter and Frequency Counter
� Inbuilt Signal Generator l Low cost trainer demonstrating both Series
and Parallel Resonance on the same board
�Two Identical Single Phase
Transformer
� Inbuilt Single Phase Variac
� Microcontroller based LCD to
display variation in temperature
Nvis 7017 - Three Phase Synchronous Generator Lab
To study Open Circuit Characteristic, Short Circuit Characteristic, Voltage Regulation of Three Phase Synchronous Machine etc.
�Machine with class “B” insulation
�Heavy duty base/channel
�Flexible shaft coupling arrangement
Nvis 7014 - DC Series Machine Lab
To study Operational Working, Load Characteristic, Speed Control of Motor etc.
Nvis 7018 - Synchronous Machine Training System
To study Synchronisation Methods of Two Identical Three Phase Synchronous Generator etc.
Nvis 7015 - Single Phase Induction Motor Lab
To study Running and Reversing Phenomenon, No Load Test, Load Test, Block Rotor Test of Single Phase Capacitor Start Induction Machine etc.
�Facility to configure motor connection externally
�Machine with mechanical loading arrangement
Nvis 7019 - Three to Six Phase ConversionDemonstrator
To study about Conversion of Three Phase to Six Phase with proper phase displacement, Three Phase Configurations etc.
Nvis 7016 - Measurement of Xd and Xq ofThree Phase Synchronous Machine
�Flexible shaft coupling arrangement
�Machine with class “B” insulation
�Heavy duty base/channel
Nvis 7021 - Shunt Motor Series Generator Lab
To study Positive, Negative and Zero Sequence Impedance, Slip Test of
Three Phase Synchronous Machine etc.
Nvis 7013 - Three Phase Synchronous Motor Lab
To study "V" and Inverse "V" curve of Three Phase Synchronous Motor etc.
�Flexible shaft coupling arrangement
�Machine with class “B” insulation
�Provided with Centre-tapped
wattmeters
�Machine with mechanical loading arrangement
�Heavy duty base/channel
To study Operational Working, Internal and External Characteristic of DC SeriesGenerator etc.
�Electrical Loading Arrangement l 240 x 128 Graphical LCD Display
�RISC Microcontroller based design for measurement
� High resolution ADC for accurate measurement
�Separate terminals to analysis
waveforms
� Three Identical Single Phase
Transformer
� Equipped with supply
indication lamps
�Specially designed BS-10 safety
terminals
� Electrical loading arrangement
� Designed by considering all safety
precautions
Nvis 7023 - DC Compound Motor Lab
Nvis 7027 - Induction Motor Compound Generator Lab
Study and Verify Load Characteristics of Long and Short Shunt Cumulatively Compound Generator and Differentially Compound Generator etc
Nvis 7030Induction Motor Series Generator Lab
Study and verify No-Load Characteristics and Load Characteristic of DC Series Generator etc.
Nvis 7022 - Field Test of DC Series Machine
To study of Internal and External Characteristic, Determines Efficiency of DC Series Motor etc.
�Flexible shaft coupling
arrangement
�Machine with class “B”
insulation
�Electrical loading facility
Nvis 7028 - Induction Motor Shunt Generator Lab
Study and Measurement of Open Circuit Characteristic, Internal Characteristic,External Characteristic of DC Shunt Generator etc.
�Flexible shaft coupling
arrangement
�Machine with class “B”
insulation
�Electrical loading facility
Nvis 7029 - DC Series Motor Shunt Generator Lab
Study and Measurement of Open Circuit Characteristic, Internal Characteristic,External Characteristic of DC Shunt Generator etc.
�Flexible shaft coupling
arrangement
�Machine with class “B”
insulation
�Electrical loading facility
Nvis 7025A - Energy meter
Understanding Calibration of
To study connection of Energy meter in Transmission line, Measurementof Energy in kW, Calibration of Energy meter using inbuilt Watt meter,Voltmeter and Ammeter etc.
Nvis 7031 - Compound Motor Compound Generator Lab
Study and verify the Load Characteristics of Long and Short Shunt Cumulatively Compound Generator and Differentially Compound Generator etc.
Study and Verify Load Characteristics of Short Shunt and Long ShuntDC Compound Motor etc.
�Machine with
mechanical loading
arrangement
�Heavy duty
base/channel
�Flexible shaft coupling arrangement
�Machine with class “B” insulation
�Electrical loading facility
�Single phase kWh Energy meter
� Inbuilt Voltmeter, Ammeter, Watt
meter as Standard meter for
calibration of Energy meter
� Big font LCD (16 x 2) for use as
Standard meter/Energy meter
calibration
�Electrical Loading Arrangement
�Flexible shaft coupling
arrangement
�Provided with Digital Tachometer
� Machine with Class “B” Insulation
� Heavy Duty Base/Channel
� Terminals provided to use the optional
externally
Nvis 7034 - Swinburn's Test of DC Machine
Study and Determine the Losses of DC Machine and Correspondingly calculate the Efficiency of DC Machine.
�Machine with
mechanical loading
arrangement
�Heavy duty
base/channel
�Brake drum/pulley
with heat suppression
facility
Nvis 7033 - Slip Ring Induction Motor Lab
Cut Section of Machines
Identification of different part of Machines, Understanding the functionalstructure of Machine with running condition etc.
Nvis 7035 - Hopkinson's Test of DC Machine
Study and Obtain the Losses Separately and Correspondingly determine theEfficiency of a DC Shunt Machine.
�Two identical Motor Set
�Machine with class “B” insulation
�Electrical loading facility
Study of Ramp Comparator Firing Circuit, Single Phase Half wave, Semi and Bridge Converter Drive etc.
Nvis 7040 - Single Phase Bridge Converter Drive
Nvis 7032 - Cascading of Three Phase InductionMachine
�Exclusive and rugged design
�Stand alone operation
�Designed by considering all the safety precautions
�High quality meters
Study of three phase, 4 Pole, Slip Ring Induction Machine and correspondinglyknow the relation between speed V/S pole of the Machine
To study Running and Reversing Phenomenon, No Load Test, Load Test, Block Rotor Test of Three Phase Slip Ring Induction Machine etc
Nvis 7037 - Three Phase Transformer Lab
To study Open Circuit Test, Short Circuit Test, Load Test, Three Phase Configurations etc.
�Big graphical LCD display
�Facility to configure star and delta
connected transformer
�Diagrammatic representation of
circuit
�Inbuilt power-scope for
isolation measurement
�Three phase firing
circuit with isolation
�Test terminals provided
to analysis waveforms
�Provided with DC
Shunt motor
Model Nos. Type of MachinesNvis 7038 DC ShuntNvis 7038A DC CompoundNvis 7038B 3-Phase AC SynchronousNvis 7038C 3-Phase AC Squirrel Cage InductionNvis 7038D 3-Phase AC Slip Ring InductionNvis 7038E DC SeriesNvis 7038F 1-Phase Capacitor Start Capacitor
Run Induction motor
�Exclusive and rugged designed panel
� Designed by considering all the safety
precautions
� Provided with digital
Tachometer
To study about speed controlling of DC Motor and its running and reversing phenomenon using ward Leonard method etc.
Nvis 7036 - Ward Leonard Method of DC Machine
�Electrical Loading
Arrangement
�Flexible Shaft Coupling
Arrangement
�Heavy Duty Base/
Channel
Nvis 7057 - Power Measurement using CT & PT
Operational working of CT and PT, Measurement of Single Phase Power using CT and PT etc.
�Inbuilt voltage current Power
�Inbuilt CT and PT facility to
observe CT for various turn
ratio
Nvis 7061 - Power Factor Demonstrator
Measurement of Power Factor using different configuration of Resistive,Capacitive, Inductive (RLC) Load and its improvement etc.
�Inbuilt isolation BNC
terminals to observe V & I
simultaneously
�Equipped with inbuilt R, L &
C Load
�Alphanumeric 16 x 2 big
font LCD
�Equipped with Multifunction meters with kWH display
�Complete practical learning for wiring in Houses
�Test points are provided to measure voltage at different points
�Designed by considering all the Safety Standards
�Diagrammatic representation for the ease of connections
Nvis 7059 - Home Electrical Wiring Training System
To study the connection of Energy Meter and Consumer Unit, MCB, Two-WaySwitch, Ceiling Fan, Tube Light etc.
Nvis 7063 - Transmission Line Training System
Measurement of ABCD, H, Z and Image parameters of Short, Medium and Long Transmission Line, understand Ferranti effect, performance of transmission line under different loads etc.
�240 x 128 graphical LCD
display
�RISC microcontroller
based design for
measurement
�Facility to design short,
medium and long
transmission line
Nvis 7058 - AC and DC Starter Demonstrator
Study of AC (Star-Delta and DOL) Starter and DC (Three Point and Four Point) Starter etc.
�Demonstration of
both AC and DC
Starters
�Diagrammatic
representation of
starters
Study the operating of Moving Coil type Instruments, Moving Iron type Instruments, Dynamometer type Instruments.
�Inbuilt AC & DC Source to test
AC & DC Meters
�Meters provided with
transparent front plate
Nvis 7060 - Meter Demonstrator
Nvis 7062 - & Three Ammeter Method
Power Measurement by Three Voltmeter
Measurement of Power and Power Factor in a Single-Phase circuit using Three Voltmeters and Three Ammeter Method etc.
�Provided with digital panel
meters
�Inbuilt inductive load
�Separate sections for
voltmeter and ammeter
methods
Nvis 7044 - Single and Three Phase AC Voltage Controller
Study of Three Phase Firing Circuit, Single and Three Phase AC VoltageController at Lamp Load and Motor Load etc.
�Provided with three phase
induction motor
�Inbuilt power-scope for
isolation measurement
�Three phase firing circuit
with isolation
�Test terminals provided to
analysis waveforms
Nvis 7069 - Single Phase & Three PhaseCapacitive Load
Suitable for Electrical Machine Laboratory, Compatible in Single and Three Phase Supply (Star and Delta Configuration) etc.
�Compatible in star and delta
configuration
�Suitable for single as well as
three phase load
Nvis 7067 - Single and Three Phase Resistive Load
Suitable for Electrical Machine Laboratory, Compatible in Single and Three Phase Supply (Star and Delta Configuration) etc.
�Compatible in star and delta
configuration
�Suitable for single as well as three
phase load
�Exhaust fan for heat suppression
�MCB are using as switch to increase
load and protection at the same time
Nvis 7065 - Symmetrical and UnsymmetricalFault Demonstrator
Study and Analysis symmetrical and unsymmeterical faults in three phase transmission line etc.
�Equipped with voltage and
current selector switches
�BNC terminal to analysis
waveform before and after
faults
Suitable for Electrical Machine Laboratory, Compatible in Single and Three Phase Supply (Star and Delta Configuration) etc.
�Compatible for Single and Three Phase Operation
�Suitable for both static & rotating machines
�Load variation can be obtained by movable handle
�Heavy duty castor wheel for easy movement
Nvis 7068 - Single and Three Phase Inductive Load
Nvis 7064 - Radial and Ring main Distribution System
Working phenomenon of Distribution System configured as Radial andRing Main Distribution System
�Inbuilt DC Variable Source
�Digital panel meters
�Facility to configure
balanced and unbalance
network
Nvis 7070 - 3 Phase Parameter Measurement
Measurement of any 3-phase electrical system simultaneously withoutusing individual meters
Nvis 7070A - Electrical Data Acquisition System
Three AC current channels, two DC voltage channels, two DC current channels,speed and torque measurement through wireless
�Microcontroller based design for accurate measurement
� 240 x 128 Graphical LCD Display to view all the parameters
� Simultaneous display of Three Phase electrical parameters
� Used with Single Phase / Three Phase Supply
�Curve can be plotted between any two parameters
� Store curve reading for further study
� Microcontroller based Accurate & Reliable design
� Wireless connectivity to PC
� CT is used as current transducer
Nvis 7080 - Transformer Oil Testing System
Study and measurement of Breakdown Voltage (Dielectric Strength)of transformer oil etc.
�Fully motorized high voltage control
�Break down voltage protection
�Over current protection
�Mains & H.T. “ON” & “OFF”
Switches
Nvis 7073 - Single Phase Power Meter
Active Power
10-1200Watt, Accuracy
± (2% reading + 3 digits)
Apparent Power
10-1200V A, Accuracy
± (2% reading + 3 digits)
Reactive Power
10-1200V AR, Accuracy
± (2% reading + 3 digits)
Nvis 7074 - Single Phase Meter
Voltage
10 - 230Vrms, Accuracy
± (1% reading + 2 digits)
Current
0.2 - 5Arms, Accuracy
± (1% reading + 2 digits)
Active Power
10-1200Watt
Accuracy
± (2% reading + 3 digits)
Nvis 7077 - AC Voltmeter
Voltage
10 - 450Vrms
Accuracy
± (1% reading + 2 digits)
Nvis 7078 - AC Ammeter
Current
0.2 - 5Arms
Accuracy
±(1% reading + 2 digits)
Nvis 7077D - DC Voltmeter
Voltage
0 - 300V
Accuracy
± (1% reading + 2 digits)
Nvis 7078D - DC Ammeter
Current
0 - 5A
Accuracy
±(1% reading + 2 digits)
Nvis 7072 - Single Phase Watt Meter
Active Power
10-1200Watt
Accuracy
± (2% reading + 3 digits)
�Microcontroller based Accurate and
Reliable design
� CT is used as current transducer
� 4 - Digit Seven Segment Display
� Dimension (mm) : 96 X 96 X 110
Nvis 7071 - Single Phase Multi Function Meter
Voltage
10 - 230Vrms, Accuracy ± (1% reading + 2 digits)
Current
0.2 - 5Arms, Accuracy ± (1% reading + 2 digits)
Active Power
10-1200Watt,
Accuracy ± (2% reading + 3 digits)
Nvis 7093 - Under Voltage & Over Voltage RelayTesting System
To study the operating performance of Under Voltage and Over Voltage Relay with different plug settings etc.
�Electromechanical relay to understand the internal mechanism
�Inbuilt Single Phase Variac
�Alphanumeric 16 x 2 big font LCD
Nvis 7094 - Earth Fault Relay Testing System
To study and verify the operating characteristics of Earth Fault Relay different plug setting etc.
�Electromechanical relay
to understand the
internal mechanism
�Inbuilt Single Phase
Variac
Nvis 7095 - Differential Relay Testing System
To study and verify the operating characteristics of Differential Relay with different plug setting etc.
�Electromechanical relay
to understand the
internal mechanism
�Inbuilt Single Phase
Variac
�Alphanumeric 16 x 2 big
font LCD
Nvis 7090 - MCB and HRC Fuse Testing System
Study the Operating Principle and Characteristics of B-type & C-type MiniatureCircuit Breaker, HRC fuse etc.
�Inbuilt current injection
facility
�Alphanumeric 16 x 2 big font
LCD
�Inbuilt MCB's with
transparent front plate
Nvis 7091 - Over Current Relay Testing System
To Study operating performance, current versus time characteristic of over current relay at different plug settings etc.
�Electromechanical relay to
understand the internal
mechanism
�Inbuilt Single Phase Variac
�Alphanumeric 16 x 2 big
font LCD
Nvis 7098 - Three Phase Over Current & Earth FaultNumeric Relay Testing System
�Four element (Three Phase
+ EF) Non Directional
Over current IDMT/DMT
�On site CT Secondary
selection 1A or 5A
�Instantaneous Over-
Current protection with
adjustable timer
To study and verify the operating characteristics of Three Phase Over current andEarth Fault Numeric Relay with different TMS setting and Current Setting etc.
�Microcontroller based Numeric Relays Demonstration
�Inbuilt Voltage and Current sources
�Contactor is provided for experimentation of relay as protection devic
Nvis 7099 Universal Relay Training System
To study the operating performance of various type of numeric relays like UnderVoltage ,Over Voltage , IDMT Over current, Differential relay and Thermal relay etc.
Nvis 7081 - Flash Point Testing Apparatus
Study and analysis Flash Point and Fire point test of transformer oil etc.
� Fully automatic control unit l Microcontroller based Design
� Equipped with temperature indicator
� Provided with Brass machined oil cup with handle
Nvis 7089 - Electrical Workstation
�Available with Electrical Data Acquisition system(optional)
�Good quality digital panel meters
�Provided with suitable protection such as MCB, Fuses, etc.
�Suitable for all type of AC and DC Machines
Nvis 7089 Electrical Workstation offers an excellent approach to teaching of Electrical Machines principles by introducing a uniquemodular designed workstation. It provides flexibility for students to carry out wide range of Electrical Experiments over AC and DC Machines using a large selection of Industry standard components and so enables user to put their theory knowledge into practice and ensures to get the highest quality practical experience.
**More than 70 experiments can be performed in Nvis 7089 using different Modules
AC Machines (optional)
?Single Phase Capacitor Start Induction Motor
?Three-Phase Slip Ring Induction Motor
?Three-Phase Squirrel Cage Induction Motor
?Three-Phase Salient Pole Synchronous Motor
?Three-Phase Salient Pole Synchronous Generator With Delta Configuration
?Three-Phase Salient Pole Synchronous Generator With Star Configuration
Transformer (optional)
?Single Phase Transformer
?Three Phase Transformer
Motor with Mechanicalloading arrangement
DC Machines (optional)
?DC Shunt Wound Motor
?DC Series Wound Motor
?DC Compound Wound Motor
?DC Shunt Wound Generator
?DC Series Wound Generator
?DC Compound Wound Generator
Generator with Electrical loading arrangement
Electrical Measurement and Circuits (optional)
Transformer Module
Experiments to be covered on
An ISO 9001: 2008 company
Nvis Technologies Pvt. Ltd.141-A, Electronic Complex, Pardesipura, Indore - 452 010 India Tel.: 91-731-4211500, E-mail: [email protected], Website : www.NvisTech.com
Designed & Manufactured in India by :
For further details contact:
NvisTechnologies Pvt. Ltd.141-A, Electronic Complex, Pardesipura, Indore-452010, India. +91-731-4211500, [email protected], www.nvistech.com
Sub
ject
to C
hang
e, V
07-2
0022
014
E Electronic H bby K
xclusiveo
its
E x p l o r e El t o icec r n s
with
Exclusive Electronic Hobby Kits
? Simple Water Level Indicator
? Water Level Indicator
? Fire Alarm
? Simple Burglar Alarm
? Simple Touch Bell
? Musical Touch Bell
? Musical Doorbell with Memory
? Magic Eye and Many More...
? Flashing LEDs
? Water Pump Controller-cum-Motor
? Timer
? Garage Light and Security Control
? Low-Range AM Radio Transmitter
? FM Transmitter
? FM Receiver
? Burglar Alarm System
? Traffic Light Control
? Smoke Alarm and many more...
? Moving Message Display
? Infrared Proximity Detector
? Infrared Remote Switch
? Frequency Measurement
? Clap-Based Switching for Devices
? Car Security System with Remote Control
? Temperature Indicator
? Light Sensor
? IR Counter
? Code Lock
? Stop-Water and many more...
Beginner Level Intermediate Level Advanced Level
Finest 115 - True-RMS General Purpose Clamp Meter with Diode Test
Features
?Rugged, easy & single-handed operational, and reliable.
? Protective hand guard to prevent an accidental contact with conductor.
? Frequency measurement capability.
?True-RMS Clamp Meter.
? Surge (Transient) Voltage protection.
? Peak hold
? DC A Zero adjustment thumbwheel.
? Low-Battery annunciator.
? Maximum conductor size 1.5".
? Diode test
?One Year Warranty
Finest 113 - 3 ¾ Digit General Purpose Clamp Meter
Features
? Protective Hand Guard to prevent an accidental contact with conductor.
? Frequency measurement capability.
? Average sensing Clamp Meter.
? Surge (Transient) voltage protection.
? Peak hold & DC A Zero Adjustment thumbwheel.
? Low-Battery annunciator.
? Maximum conductor size: 1.5".
?One Year Warranty
Finest MAXIMA 129 - Dual Display Clamp DMM™ with Detachable Current Head
Features
?3-3/4 digit, 4000 count LCD display
? Auto-ranging measurement with manual ranging (Amps) capability
?MIN/MAX (Peak Hold) (all ranges except Frequency)
?Frequency/Duty Cycle/Data Hold
?Auto power off with manual override
?Detachable Current Probe makes the meter compatible withall kinds of DC mV output adapters
?Built-in test leads storage & magnetic mount
?Backlit display & worklight
?Temperature/Non-Contact Voltage/Dual display
?TRMS measurement
?CATIII 600V Safety protection
?UL-Listed & CE-mark certified
?One Year Warranty