· > R&D center > 500 m3 . anechoic chamber > Two listening rooms >Drive unit and tweeter production area > Car audio assembly unit > Utopia series assembly > Home audio assembly

> R&D center> 500 m3 anechoic chamber> Two listening rooms

>Drive unit and tweeter production area

> Car audio assembly unit

> Home audio assembly unit> Utopia series assembly

> Corporate Headquarters

>Our logistic department supplies worldwide distribution

> Warehouse

Innovation is key totheFocalsound.For25years,through the pursuit of con-stant new advances in tech-nology, Focal has been ableto develop a harmoniousresearch and production sys-tem that enables us to con-tinuouslyimproveourproductsand introduce new ones, allwith the same goal: the mostfaithful reproduction of music. The latest exampleof this philosophy has beenthe introduction of Berylliuminourtopproducts,whichhasbecomeanewreferenceworld-wide.Constantlypursuinginno-vation is the embodiment ofFocal’s corporate strategy andthat goal involves every facetof the company. From R&D toproduction to quality control,allourteamsarefullyinvolvedandfocusedonthisoneobjec-tive:continualprogressthroughinnovation. In today’s world,where globalization and thepursuitofchasingcheaperpro-ductionmethodshavetempted

most companies to splintertheir organizations, Focal hasopted to be different. Thoughwe have grown tremendouslythrough the years, our R &D,headquarters and manufactur-ing facilities remain based inSaint-Etienne(France). Wehavelearnedthattrue innovation is not simplyworkcarriedoutattheresearchdepartment,butisalsoaques-tionofcomprehensivemanage-ment and the direct control ofthedifferentproductionphases.The example of Beryllium isa significant one. Only a fewyearsagonoonewascapableof producing tweeters with apureBerylliumfoildome.Focalinnovatedasolutionbasedonresearch and the invention ofspecificin-houseindustrialpro-cesses. Suchanapproachhasgiven us an important advan-tage over our competitors: wedevelop our own technology,whichallows us to consistentlyprovidetruequalityproductionusingourownmethods.

In 2008, the FocalCar Audio line is greater thanever. With the introduction ofthe new Solid amplifier line,theFocalsoundhasalsoneverbeenasaffordable.Thisshowsour will to constantly improvethe pleasure of listening tomusic at all price levels, incompletecontrastwiththegen-eral assumption that if it isaffordable then the consumershouldnotexpectperformance.Throughinnovationandexperi-ence, we are proud to offerboth.Focalcultivatesthisdiffer-ence…thisisthecorestrengthofourbrandandourcompany.ThisistheSpiritofSound.

Wewanttosharethiswithyou…

It is our Utopia…

Innovation is key to the Focal sound

>GrandeUtopiaBe.463lb.,69in.Worldstandard.

Lyon

Focal-JMlab Headquartersin Saint-Etienne (France)

Focal-JM Lab Headquarters

Paris

Saint-Etienne

Focal SolidWe know what speakers need

ThelatestinnovationfromFocalarrivesintheformofthreecompactamplifiers.

Availableineitherblackorred,thesenewandverycompactamplifiersofferhighflexibilityand

terrificsound.Solid1isdedicatedforusewithasubwoofer,Solid2ismadeforstrengtheningyour

frontsystempower,althoughotherusesarealsopossible,andfinally,Solid4,willsupplyeither

yourfrontandrearspeakersorpilotasubwooferandaseparatekitatthesametime.

AllSOLIDmodelsareCEA-2006compliantandfeaturehighandlowlevelinputs,variable

crossoversandsub-sonicfilters,greatsoundqualitytosizeratio,andfloatinggroundstoprevent

enginenoise.The4channelandmonoblockmodelsalsoincludearemotesubcontrol.

> Versatile:1or2channelmode2x75Winto4OhmStableinto2Ohm

Solid 2

Aluminum Chassis Fanless cooling, linear performance

Oversized output transistors High power handling

High level inputs Easy installation with factory head unit

> Versatile:2,3,or4channelmodeStableinto2OhmRemotecontrolincluded

Solid 4

> High-levelinputStableinto2and4OhmRemotecontrolincluded

Solid 1

Small in size, big in powerSolid Amplifiers

Solid 1 Solid 2 Solid 4

Nominal power measured at 14.4V continuously into 4 Ω THD + N <1%

1x300W 2x75W 4x75W

Signal/Noise ratio(1 Watt output)

>85dB(A) >77dB(A) >80dB(A)

Nominal power measured at 14.4V continuously into 2 Ω THD + N <1%

1x470W 2x100W 4x100W

Power in bridged mode measured at 14.4V continuously into 4 Ω THD + N <1%

1x200W 2x200W

THD + N @ 4 Ω 0.01%@50Hz 0.02%@1kHz 0.02%@1kHz

Signal/Noise ratio (A Weighted) >100dB(A) >95dB(A) >100dB(A)

Damping factor @ 4 Ω 50to50Hz 100to1kHz 50to1kHz

Frequency response @ -1dB 10Hz-150Hz 10Hz-60kHz 10Hz-60kHz

Input impedance 20kΩ 20kΩ 20kΩ

Input sensitivity 0.2-5V 0.2-5V 0.2-5V

High-pass filter 50-150Hz(12dB/oct.) 50-150Hz(12dB/oct.)

Low-pass filter 50-150Hz(12dB/oct.) 50-150Hz(12dB/oct.) 50-150Hz(12dB/oct.)

SUBSONIC filter 35Hz(24dB/oct.)

Remote control Included Included

Adjustable BASS BOOST level 0to+9dB@50Hz

Variable phase 0˚to180˚

Maximum cross section of speaker wires 10mm27AWG

10mm27AWG

10mm27AWG

Maximum cross section of power wires 35mm22AWG

35mm22AWG

35mm22AWG

Fuse(s) 2x25A 1x25A 2x25A

Protections

•Short-circuit•Thermaloverload•Overvoltage•Polarityreversal



Dimensions (H x W x D) 13/4x1113/16x77/8”45x300x200mm

13/4x82/3x77/8”45x220x200mm

13/4x1113/16x77/8”45x300x200mm

Solid Specifications

Bothradicalandexclusive,theUtopiaBerange is, above all, the outcome of anextraordinary endeavor to reach the farreachesofexceptionalsoundresolution.Workingwithoutconstraintshasallowedus to introduce, by the manufacture ofa tweeterwith apureBeryllium inverteddome,agenuineworld’s first that rede-fines sound quality expectations in theautomobile.

This material Beryllium, which is 100times more expensive than gold, islargely responsible for the latest step inthe sound quality revolution Focal hascreated. By obtaining an extension ofthebandwidthout to40kHz, real–andenormous – technological progress hasbeenmadeandresultsintheclearrepro-ductionoftheverytiniestdetail.

In addition, by lowering the resonantfrequency to 1kHz, an optimal couplingis made between the tweeter and themid-range, creating a soundstage withincomparablewidthandprecision.

The design of the composite sandwich“W” cones, for the mid-range driversand subwoofers, allows for completecontrol of a wide range of parameters,includingrigidity,lightnessanddamping.Thisassuresamoreneutralandrealisticsound.

UtopiaBehassetnewstandardsformu-sical quality. The extraordinary resultscould not have been created without ademandinganduniquemix of technicalinnovation, hand-made precision andfull in-house control of all manufactur-ingprocesses.Weareconvincedthatthehistoryofhi-fidelitywill includeabeforeandafterUtopiaBereferencepoint.

The New Standard

Utopia Be™

Crossblock:A true innovation that offers no less than 4,480 combinations of filtering at your fingertips, it allows precise adaptation of the crossover to the unique and varying acoustical characteristics of any automobile.

“W” composite sandwich cone woofer:Theunmatchedrigidityofferedbytheglasslayersdeliversextremelinearityoverawidefrequencyrange without any low frequency distortion.The structural foam central core’s lightnessallows optimal acceleration, without decay,while damping derived from the “W” materialproducesaneutral,colorationfreesound.

Beryllium inverted dome tweeter:Dome/coiloptimizationdeliversanoutstandingenergyresponsebeyondwhatisobtainablewithconventionaldomes.TheBerylliumoffersanunmatchedextendedimpulseresponsefrom1000Hzto40kHz,ensuringneutrality,aswellasaperfectlinkbetweenthetweeterandthewooferthankstoitsverylowresonancefrequency.

Beryllium cone forming

Kit N° 5 / N° 5 Active Kit N° 6 / N° 6 Active Kit N° 7 / N° 7 Active

Maximum Power 150W 200W 200W

Nominal Power 75W 100W 100W

Sensitivity (2.83 V/1m) 89.5dB 91.5dB 89dB

Frequency Response (+/- 3 dB) 75Hz-40kHz 66Hz-40kHz 55Hz-40kHz

Nominal Impedance 4Ohm 4Ohm 4Ohm

Tweeter TBe,Berylliuminverteddome TBe,Berylliuminverteddome TBe,Berylliuminverteddome

Woofer 130mm(5”),“W”compositesandwichcone

165mm(6.5”),“W”compositesandwichcone

Midrange:80mm(3”),“W”compositesandwichcone

Midrange:165mm(6.5”),“W”compositesandwichcone

Magnet Neodymium Neodymium Neodymium Neodymium

Voice Coil 32mm(1.25”) 40mm(1.6”) 25mm(1”) 40mm(1.6”)

Cut-out Diameter 115.5mm(4.5”) 143mm(5.6”) 73mm(2.9”) 143mm(5.6”)

Mounting Depth 63mm(2.5”) 72mm(2.8”) 35.8mm(1.4”) 72mm(2.8”)

Crossover Crossblock/withoutcrossover(active) Crossblock/withoutcrossover(active) Crossblock/withoutcrossover(active)

Controls 4,480positions(passiveversion) 4,480positions(passiveversion) 4,480positions(passiveversion)

> 130 mm (5”) 2-way kit. Separate crossover (passive version). Grilles included. The defining standard with the most accurate sound reproduction of mid-range and high frequencies. Woofer addition is advised.

Kit N° 5 / N° 5 Active Kit N° 7 / N° 7 Active>165 mm (6.5”), 80 mm (3”) midrange 3-way kit. Separate crossover (passive

version). Grilles included. The defining standard combines outstanding sound reproduction quality in both low, midrange and high frequencies and allows for multiple midrange and tweeter mounting positions for optimal soundstaging.

From extreme technology to sound sensualityUtopia Be

Two years of research and developmentSets a world standard in acoustic performance

Pure Beryllium inverted dome tweeter in combination with Poron® surround

Extended frequency response at 40 kHz for outstanding sound definition and extraordinary accuracy.

Composite sandwich “W” cone wooferHigh rigidity and low mass ensure

unrivaled neutrality.

Crossblock crossover with 4,480 different settingsIdeal matching in any installation

regardless of complexity.

Compact basket with integrated surroundVibration and blur free

>165 mm (6.5”) 2-way kit. Separate crossover (passive version). Grilles included. The defining standard dedicated to the most accurate sound reproduction in the low, midrange and high frequencies.

Kit N° 6 / N° 6 Active

> 33 cm (13”) Multimagnet subwoofer High sensitivity and power allow it to reproduce deep and detailed bass frequencies.

33 WX

Absolute fidelity down to extreme bassUtopia Be Subwoofers

Multiferrite magnet Powerful magnetic field, air decompression

for better power handling

Composite sandwich “W” cone Highly defined low frequencies perfectly reproduce

the input signal, distortion free

Bass-reflex or closed enclosure use. Customizable to all types of listening preferences

Self regulated coil cooling system Optimal reliability, consistent performance

Limited inner volume (between 15 and 30 liters) Exceptional bass reproduction in a compact

environment

> 2 x 3-way separate crossovers designed for N°7 Utopia Be active kit. 12/12/18dB/oct. crossover. Cut-off frequencies: 220 Hz - 7.5 kHz Adjustable tweeter level (0/+3 dB).

Cross Uniq Nº7

* Depending on load

> 2x 2-way separate crossovers designed for N°5 and N°6 Utopia Be active kits. 12/18dB/oct. crossover. Cut-off frequency: 4.2kHz. Adjustable tweeter level (0/+3dB).

Cross Uniq

> 13 cm (5”) Compact subwoofer developed for mounting in the front of the vehicle. 22 mm (0.9”) high linearity voice coil, Neodymium magnet. High power handling, significant energy contribution in a well limited inner volume environment in order to achieve exceptional bass reproduction.

13 WS

> 21 cm (8”) Multimagnet subwoofer Combines smaller dimensions and limited inner volume for deep, high-impact bass reproduction.

21 WX

13 WS 33 KX 40 KX

Load Sealed Sealedorvented Vented

Load Volume 3-7liters(0.106-0.247Ft3) 15-30liters(0.530-1.059Ft3) 35-50liters(1.236-1.766Ft3)



Sensitivity (2.83 V/1m) 88dB 86.5dB 92dB

Frequency Response (+/- 3 dB)* 36Hz-1500Hz 29Hz-500Hz 27Hz-350Hz


Subwoofer 13cm(5”),“W”compositesandwichcone

21cm(8”),“W”compositesandwichcone

33cm(13”),“W”compositesandwichcone

Magnet Neodymium Multiferrite(12ferrites) Multiferrite(12ferrites)

Voice Coil 32mm(1.25“) 50mm(2“) 77mm(3“)

Cut-out Diameter 116mm(4.6“) 182mm(7.2“) 320mm(13“)

Mounting Depth 66mm(2.6“) 106mm(4.2“) 150mm(6“)

K2 Power™

The Spirit of Sound ... with a kick !

CrossoverK2 Power crossovers are equipped with the leading performance audiophile compo-nents, therefore following Focal’s long standing high standards. Aluminized Polypropylene capacitors provide very high definition alongside the air core inductors which offer great dynamics. For optimal integration, KP series kits are equipped with a tweeter level control switch (0/-7dB, 1dB per action) and midrange position matching.

K2 composite sandwich cone wooferThis cone structure features a thermoformed,structural foam central core, coated with an

Aramid fiber layer on the front side and a glass layer directly derived from the Utopia

series on the back side. This hybrid technology significantly improves

membrane rigidity without raising the weight. The long coil remains distortion free even at

high levels.

K2 cone assembly

Developed to allow you to reach thevery top levels of acoustic resolutionand sound pressure, the K2 Powerrange symbolizes Focal’s expertise.Combining an evocative mix of puresoundcontrolwithdetailanddynamics,speed and sophistication; the “PowerHi-Fi”conceptdevelopedbyFocalhasallthehallmarksofareferencequalityline.

The Tioxid 5 inverted dome tweetercombines smoothness and precisionwithout directivity, optimizing imagingandproducinganastonishinglybroadand realistic soundstage. This keycomponent,toooftenneglected,makesthedifferencebetweenagoodandanexcellentinstallation.

Another element essential toFocal’sreputationforcreatingtheveryhighest quality sound, are thewoofers and subwoofers from thisline.Theycombineveryhighpowerhandlingandanextremelydetailedsound thanks to the exceptional ri-gidityoftheK2’scompositesandwichconetechnology.

Andbecauseprecision,impactandtheculture of car audio define “the Spiritof Sound”, our common passion willalwaysmakethedifference.

TN 47 and TN 52 inverted dome tweetersUnsurpassed dynamic performance is the basis for the excellent staging derived from this technology. Staging even reaches surgical accuracy on KP series thanks to the TN 52 wave guide. A 5 micron Tioxid surface coating cancels all metallic colorations, while the double-magnet “push-pull” structure generates an important magnetic flux in the air gap.

... and extreme precisionK2 Power KP

165 K2P 165 KBE

Maximum Power 200W 400W

Nominal Power 100W 200W

Sensitivity (2.83 V/1m) 92.5dB 92.5dB

Frequency Response (+/- 3 dB) 65Hz-22kHz 60Hz-45kHz

Nominal Impedance 4Ohm 4Ohm

Tweeter TN52,Tioxid5inverteddome -

Woofer 165mm(6.5”),K2compositesandwichcone 165mm(6”),K2compositesandwichcone

Magnet 100mm(4”) 100mm(4”)

Voice Coil 40mm(1.6”) 40mm(1.6”)

Cut-out Diameter 142mm(5.6”) 142mm(5.6”)

Mounting Depth 71mm(3”) 77mm(3”)

Controls Tweeterlevel(0/+7dBperstepof1dB);midrange(midflat/midhigh)

7 levels (1dB per action) adjustable tweeter control, midrange control High accuracy control, easy installation

K2 composite sandwich cone Impact and precision

Long copper wound voice coil Distortion free and high SPL

Pure Aluminum phase plug Midrange regulation

Tioxid 5 inverted dome tweeter with wave guide

Sweetness, high definition and accuracy combined with controlled directivity and optimal staging.

100 KP 130 KP 165 KPS



Sensitivity (2.83 V/1m) 90dB 90dB 91dB



Tweeter TN52,Tioxid5inverteddome TN52,Tioxid5inverteddome TN52,Tioxid5inverteddome

Woofer 100mm(4”),K2compositesandwichcone 130mm(5”),K2compositesandwichcone 165mm(6.5”),K2compositesandwichcone

Magnet Neodymium 85mm(3.3”) 85mm(3.3”)

Voice Coil 25mm(1”) 25mm(1”) 25mm(1”)

Cut-out Diameter 93mm(3.7”) 115mm(4.5”) 142mm(5.6”)

Mounting Depth 39mm(1.5”) 61mm(2.4”) 71mm(2.8”)

Controls Tweeterlevel(0/+7dBperstepof1dB);midrange(midflat/midhigh)

Tweeterlevel(0/+7dBperstepof1dB);midrange(midflat/midhigh)

Tweeterlevel(0/+7dBperstepof1dB);midrange(midflat/midhigh)

> 100mm(4”)2-waykitwithshallowmountingdepth,ahighprecisionseparatecrossoverwithtweeterlevelandmidrangecontrol.Grillesincluded.Especially developed for optimized staging with the woofer installed high in the vehicle door or on the dashboard.

100 KP> 130mm(5”)2-waykitfeaturingahighprecisioncrossoverwithtweeter

levelandmidrangecontrol.Grillesincluded.Standard basket dimensions for simplified mounting. The perfect compromise between easy installation and performance.

130 KP

> 165mm(6.5”)2-waykitfeaturingahighprecisioncrossoverwithtweeterlevelandmidrangecontrol.Grillesincluded.The defining standard that combines easy installation and quality bass.

165 KPS

Depth, definition...K2 Power KP

> 165mm(6.5”)2-waykitfeaturingahighprecisioncrossoverwithtweeterlevelandmidrangecontrol.Grillesincluded.The sound quality contest audiophile’s choice combining high power handling, extended and solid bass, midrange purity sweetness and precision.

165 K2P

165 KBE > BassExtensionkitwith(2)152mm(6”)wooferswithahigh

precisioncrossover.Grillesincluded.Add-on midbass kit to complement any 2-way component set.

130 KF 165 KF



Sensitivity (2.83 V/1m) 90dB 91dB



Tweeter TN47,Tioxid5inverteddome TN47,Tioxid5inverteddome

Woofer 130mm(5”),K2compositesandwichcone 165mm(6.5”),K2compositesandwichcone

Magnet 85mm(3.3”) 85mm(3.3”)

Voice Coil 25mm(1”) 25mm(1”)


Mounting Depth 61mm(2.4”) 71mm(2.8”)

Controls Tweeterlevel:0,-3,-6dB Tweeterlevel:0,-3,-6dB

> 130mm(5”)2-waykitwithahighprecisionseparatecross-overwithtweetercontrol.Grillesincluded.Standard basket dimensions, simplified mounting. The perfect compromise between performance and easy installation.

130 KF

K2 composite sandwich cone Impact and precision

Kapton® 25mm (1”) voice coil Very high power handling

Adjustable tweeter level control Level control in accordance

to positioning

Tioxid 5 inverted dome tweeter Sweetness and precision

without directivity

Air core inductors and Polypropylene capacitors

Natural reproduction of high frequencies

165 KF> 165mm(6.5”)2-waykitwithahighprecisionseparate

crossoverwithtweetercontrol.Grillesincluded.A best seller in the footsteps of the 165 K.

The legend continues.K2 Power KF

27 KX 33 KX 40 KX 46 KX 4

Load Sealed Sealed Sealed Vented

Load Volume 20-40liters(0.706-1.413Ft3) 30-50liters(1.059-1.766Ft3) 40-80liters(1.413-2.825Ft3) 80-160liters(2.825-5.650Ft3)

Maximum Power 600W 800W 1000W 2000W

Nominal Power 300W 400W 500W 1000W

Sensitivity (2.83 V/1m) 88dB 90dB 92.5dB 96.5dB

Frequency Response (+/- 3 dB)* 35Hz-1500Hz 30Hz-1000Hz 25Hz-1000Hz 20Hz-500Hz

Nominal Impedance 4Ohm 2x2Ohm 2x2Ohm 4x1Ohm

Subwoofer 27cm(11”),K2compositesandwichcone

27cm(13”),K2compositesandwichcone



Magnet Multiferrite(12ferrites) Multiferrite(18ferrites) Multiferrite(18ferrites) Multiferrite(18solidferrites)

Voice Coil 65mm(2.6“) Dualvoicecoil65mm(2.6“) Dualvoicecoil65mm(2.6“) Quadvoicecoil77mm(3“)

Cut-out Diameter 233mm(9.2“) 289mm(11.4“) 351mm(13.8“) 428mm(16.8“)

Mounting Depth 119mm(4.7“) 161mm(6.3“) 188mm(7.4“) 214mm(8.4“)

> 27cm(11”)subwoofer,singlevoicecoil,K2compositesandwichcone,multiferritemagnet.Allows dynamic bass in restricted volumes for extended frequency response at the low end of the spectrum.

27 KX> 46cm(18”)subwoofer,quadvoicecoil,K2composite

sandwichcone,multiferritemagnet.State-of-the-art audio contest contender, successfully combines quality sound reproduction and high SPL.

46 KX 4> 40cm(16”)dualvoicecoilsubwoofer,K2composite

sandwichcone,multiferritemagnet.Dedicated to solid bass down to extreme frequencies.

40 KX

> 33cm(13”)dualvoicecoilsubwoofer,K2compositesandwichconemultiferritemagnet.Combines absolute sound reproduction fidelity, high power handling and a wide and dynamic bass.

33 KX

K2 composite sandwich cone Light and rigid to allow fast bass response

without distortion.

Multiferrite motor assembly Creates a powerful magnetic field to help

suppress compression and give better power handling.

Long excursion Butyl surround Important if the frequency response is to reach down to 30 Hz.

Double 65 mm (2.6”) 4-layer voice coil, 2 x 2 Ohm, 32 mm (1.3”) long High power handling, bass without distortion and impedance

flexibility to allow an optimized connection with the amplifier.

Self regulated coil cooling system Optimal reliability, consistent performance.

K2 solid down to extreme bassK2 Power

Subwoofers

* Depending on load

Polyglass™

Sound Pleasure Level

TNA and TNB tweeters The inverted dome tweeter is a Focal specialty that has

been precisely developed to optimize dome/coil cou- pling in order to transform the electrical energy into

an acoustical wave with minimal loss in compari-son with a conventional dome. The voice coil

diameter being two thirds of the diameter of the dome itself supports it evenly on its entire surface. The concave dome profile also provides a much improved three dimen-sional radiation, which, during listening, translates into a surprisingly large soundstage.

Crossover The Polyglass series crossovers feature the most refined au-

diophile components in order to avoid potentially damaging coloration to the products’ neutrality. Treble level controls allow

attention to details, and to facilitate better integration in all types of vehicles and desired speaker locations.

Polyglass woofer The Polyglass technology, another Focal specialty, is created through the controlled deposit of hollow silica micro-spheres over a cellulose pulp. The main objective of this

method is to combine the damping proper-ties of cellulose pulp with the rigidity of glass

with a very minimal increase in the overall mass of the cone. The sound propagation velocity is

increased on the hard surface, which dramatically improves accuracy and neutrality in the midrange

spectrum.

Since the verybeginningof thebrand, Polyglass has

symbolizedtheveryheartoftheFocalline-up.

Combiningadvancedtechnologies,total

manufacturingcontrolandaunique

know-howcontinuallydeveloped

overmorethantwenty-fiveyears,

itdeliversasoundqualityuniversally

recognizedasexcellentwhile

stillremainingaffordable.

Toarriveatthissubtle

balance,extremecaremust

betakenovermultiple

details,whichiswhyall

ofthekeyelementsare

alwaysmanufactured

in-house.

ThePolyglassconefully

harnessestheremarkable

propertiesofglass.Itfeatures

uniformdepositsofhollowglass

microballsovertheentiresurface

ofacellulosepulpcone,which

greatlyincreasesitsrigiditywithout

addingsignificantweight.

TheoverallbrillianceofthePolyglasslinecomesfrom

a combination of both the tweeter and woofer, cre-

ating a wholly neutral sound with excellent detail in

a product entirely reserved for recreating the subtle

emotionsofmusic.

Dustcap bonding on a Polyglass woofer

> 165mm(6.5”)3-waykitwith100mm(4”)shallowmount-ingdepthmidrangedriver,separatecrossoverwithtweeterlevelcontrol.Grillesincluded.Allows optimal staging thanks to its shallow mount mid-range and offers many installation solutions high up in car doors or in the dashboard.

165 VR3

> 165mm(6.5”)2-waykitwithseparatecrossoverwithtweeterlevelcontrolandmidrangematching.Grillesincluded.The line’s best seller, it is equipped with a 11mm (0.4”) high coil for a very high 94.5dB sensitivity in order to reach distortion free high sound levels.

165 VR

130 VR 165 VR 165 VR3



Sensitivity (2.83 V/1m) 94dB 94.5dB 93dB



Tweeter TNBAluminum/Magnesiuminverteddome TNBAluminum/Magnesiuminverteddome TNBAluminum/Magnesiuminverteddome

Woofer 130mm(5”),Polyglasscone 130mm(6.5”),PolyglassconeMidrange:Woofer:130mm(5”),165mm(6.5”)PolyglassConePolyglassCone

Magnet 90mm(3.5”) 90mm(3.5”) Neodymium85mm(6.5”)

Voice Coil 32mm(1.3”) 32mm(1.3”) 25mm(1”)25mm(1”)

Cut-out Diameter 115mm(4.5”) 141mm(5.5”) 93mm(3.7”)141mm(5.5”)

Mounting Depth 61mm(2.4”) 70mm(2.8”) 40mm(1.6”)68mm(2.7”)

Controls Tweeterlevel:0,-3,-6dB Tweeterlevel:-2,0,+2dB Tweeterlevel:0,-3,-6dB

Polyglass coneNeutral, coloration free sound.

TNB Inverted dome tweeterSweetness and precision

with controlled directivity

Double push-pull Neodymium magnetExtremely linear tweeter

Adjustable tweeter level control and midrange matching

High accuracy equalization, flexible installation.

Zamak cast alloy frameRigid, non-magnetic and

non-resonant frame

Power, balance and contrastPolyglass VR

> 130mm(5”)2-waykitwithseparatecrossoverwithtweeterlevelcontrolandmidrangematching.Grillesincluded.Stands out for its exceptional linearity throughout the whole spectrum and by its midrange purity and high sensitivity.

130 VR

100 VRS 130 VRS 165 VRS






Tweeter TNBinverteddome TNBinverteddome TNBinverteddome

Woofer 100mm(4”),Polyglasscone 130mm(5”),Polyglasscone 165mm(6.5”),Polyglasscone

Magnet Neodymium Neodymium Neodymium

Voice Coil 25mm(1”) 32mm(1.3”) 32mm(1.3”)


Mounting Depth 39.5mm(1.5”) 48.5mm(1.9”) 56mm(2.2”)

Controls Tweeterlevel:0,-3,-6dB Tweeterlevel:0,-3,-6dB Tweeterlevel:0,-3,-6dB

> 130mm(5”)2-waykitwithshallowmountingwooferandseparatecrossoverwithtweeterlevelcontrol.Grillesincluded.The perfect kit for installation in factory locations, even in tight spaces. Its high efficiency allows direct connection to a high power head unit.

130 VRS> 100mm(4”)2-waykitwithshallowmountingwooferandseparate

crossoverwithtweeterlevelcontrol.Grillesincluded.Specifically developed to optimize the soundstage when in high installations such as car doors or on the dashboard.

100 VRS

Polyglass cone Coloration free, neutral sound

Neodymium magnet Compact, easy to install

Adjustable tweeter level Tweeter level control for better

adaptation to all locations

TNB Inverted dome tweeter Sweetness, definition and

controlled directivity

Double Neodymium push-pull magnet

Very highly linear tweeter

> 165mm(6.5”)2-waykitwithshallowmountingwooferandseparatecrossoverwithtweeterlevelcontrol.Grillesincluded.The perfect kit for installation in factory locations, even in tight spaces. It delivers punchy bass and allows direct connection to a high power head unit.

165 VRSFocal sound in the most difficult locationsPolyglass VR Slim

130 V1 165 V1



Sensitivity (2.83 V/1m) 91dB 93dB



Tweeter TNAAluminum/Magnesiuminverteddome TNAAluminum/Magnesiuminverteddome

Woofer 130mm(5”),Polyglasscone 165mm(6.5”),Polyglasscone

Magnet 85mm(3.3”) 85mm(3.3”)




Controls Tweeterlevel:-3,0,+3dB Tweeterlevel:-3,0,+3dB

Polyglass cone Neutral, coloration-free sound

Kapton® support 25mm (1”) voice coil High power handling

Built-in voice coil cooling system Consistent performance,

optimal reliability

Aluminum/magnesium inverted dome tweeter

Treble sweetness and high definition, very large soundstage

Adjustable tweeter level control Tweeter level control

according to location

> 130mm(5”)2-waykitwithseparatecrossoverwithtweeterlevelcontrol.Grillesincluded.Allows direct connection to a high power head unit thanks to its very high efficiency while also offering a highly defined, accurate treble translating into a very large soundstage.

130 V1

Full sound and large soundstagePolyglass V1

> 165mm(6.5”)2-waykitwithseparatecrossoverwithtweet-erlevelcontrol.Grillesincluded.Allows direct connection to a high power head unit thanks to its very high efficiency.

165 V1

> 100mm(4”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.Excellent choice for factory locations.

100 CVX

> 130mm(5”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.Combines easy installation and good sonic imaging thanks to the rotating aluminum inverted dome tweeter.

130 CVX


Butyl surround Excellent power handling

Rotating Aluminum inverted dome tweeter

Sweetness and definition with controlled directivity

ABS painted DIN frame, 20% fiberglass fill

Rigid, non-resonant molded frame, easy to install

Built-in 12dB/octave audiophile crossover Saves time during installation

Efficiency and balance...Polyglass CVX

> 164x235mm(6x9”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.The ideal addition to your system for rear deck installation.

690 CVX

> 165mm(6.5”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.The CVX series defining reference in terms of tonal balance and an extended bass response. Its 93 dB high sensitivity allows direct connection to a high power head unit.

165 CVX

100 CVX 130 CVX 165 CVX 690 CVX



Sensitivity (2.83 V/1m) 90dB 91dB 93dB 93dB

Frequency Response (+/- 3 dB) 90Hz-20kHz 75Hz-20kHz 60Hz-20kHz 50Hz-20kHz

Nominal Impedance 4Ohm 4Ohm 4Ohm 4Ohm

Tweeter Aluminuminverteddome Aluminuminverteddome Aluminuminverteddome Aluminuminverteddome

Woofer 100mm(4”),Polyglasscone 130mm(5”),Polyglasscone 165mm(6.5”),Polyglasscone164x235mm(6.5x9.2”),Polyglasscone

Magnet 72mm(2.8”) 85mm(3.4”) 85mm(4”) 90mm(3.5”)

Voice Coil 25mm(1”) 25mm(1”) 25mm(1”) 30mm(1.2”)

Cut-out Diameter 94mm(3.7”) 117mm(4.6”) 140mm(5.5”) 149x222mm(5.8x8.7”)

Mounting Depth 59mm(2.3”) 61mm(2.4”) 70mm(2.8”) 93mm(3.6”)

> 27cm(11”)PolyglassconesubwooferHigh density bass reproduction in small volumes.

27 V1

> 40cm(16”)PolyglassconesubwooferTight bass for sub bass lovers.

40 V1

Energy and efficiency in Bass-reflex enclosuresPolyglass Subwoofers V1

> 33cm(13”)PolyglassconesubwooferDelivers high dynamic bass and high power handling.

33 V1

65mm (2.6”) 4-layer coil High power handling

Built-in voice coil cooling system Optimal reliability, power compression

cancellation

Zamak cast alloy frame Rigid, nonmagnetic and non-resonant frame

> 27cm(11”)PolyglassconesubwooferwithdualvoicecoilProcures a round bass for a reliable sound reproduction.

27 V2

> 21cm(8.3”)PolyglassconesubwooferOffers extended frequency response in the bass and very small volume.

21 V2

> 33cm(13”)PolyglassconesubwooferwithdualvoicecoilOffers very low bass frequencies without distortion. Excellent compromise between size and sound restitution.

33 V2


Voice coil with a large copper wire on 2 layers(21 V2) or 4 layers (27 V2 & 33 V2)

Very high power handling

Self regulated ventilation system Optimal reliability, consistent performance

Zamak frame Rigid, nonmagnetic and non-resonant frame

NBR surround with long excursion Deep bass

Extremely reliable bass in a sealed boxPolyglass Subwoofers V2

> Flaredventbass-reflexenclosurereducesventchuffingnoise.Featuresthe27V1subwoofer.Installationkitincluded.High density bass in a carefully optimized enclosure. Dimensions: 12.2” x 18.3” x 14.6”

SB 27 V1 > Flaredventbass-reflexenclosurereducesventchuffingnoise.Featuresthe33V1subwoofer.Installationkitincluded.The most impressive Polyglass enclosure provides dynamic bass and high power handling in order to reach extremely high sound levels. Dimensions: 14.2” x 20.3” x 14.8”

SB 33 V1

27 V1 33 V1 40 V1 SB 27 V1 SB 33 V1

Load Bass-reflex Vented Vented Vented Vented

Load Volume 15-30liters(0.530-1.059Ft3)

25-40liters(0.883-1.413Ft3)

40-60liters(1.413-2.119Ft3)

Maximum Power 500W 800W 800W 500W 800W

Nominal Power 250W 400W 400W 250W 400W

Sensitivity (2.83 V/1m) 90dB 92dB 93.5dB 90dB 92dB

Frequency Response (+/- 3 dB)* 35Hz-1000Hz 30Hz-1000Hz 25Hz-1000Hz 36Hz-500Hz 38Hz-500Hz

Nominal Impedance 4Ohm 4Ohm 4Ohm 4Ohm 4Ohm

Subwoofer 27cm(11”),Polyglasscone

33cm(13”),Polyglasscone




Magnet 120mm(4.7”) 156mm(6.1”) 156mm(6.1”) 120mm(4.7”) 156mm(6.1”)

Voice Coil 50mm(2“) 65mm(2.6“) 65mm(2.6“) 50mm(2“) 65mm(2.6“)

Cut-out Diameter 233mm(9.2“) 288mm(11.3“) 351mm(13.8“)

Mounting Depth 130mm(5“) 158mm(6.2“) 185mm(7.3“)

* Depending on load

> 27cm(11”)PolyglassconefreeairsubwooferwithdualvoicecoilProcures a round bass for a reliable sound reproduction.

27 V2 FA

21 V2 27 V2 27 V2 FA 33 V2

Load Sealed Sealed Vented Sealed


15-30liters(0.530-1.059Ft3)

15-30liters(0.530-1.059Ft3)

25-50liters(0.883-1.766Ft3)



Sensitivity (2.83 V/1m) 85dB 88dB 88dB 90dB

Frequency Response (+/- 3 dB)* 40Hz-500Hz 35Hz-500Hz 35Hz-500Hz 30Hz-500Hz

Nominal Impedance 4Ohm 2x4Ohm 2x4Ohm 2x4Ohm

Subwoofer 21cm(8.3”),Polyglasscone

27cm(10.6”),Polyglasscone

27cm(10.6”),Polyglasscone


Magnet Doubleferrite120mm(4.7”)

Doubleferrite156mm(6.1”)



Voice Coil 50mm(1.9“)Dualvoicecoil65mm(2.5“)

Dualvoicecoil65mm(2.5“)

Dualvoicecoil65mm(2.5“)

Cut-out Diameter 184mm(7.2“) 232mm(9.1“) 232mm(9.1“) 287mm(11.3“)

Mounting Depth 114mm(4.5“) 133mm(5.3“) 133mm(5.3“) 159mm(6.3“)

* Depending on load

Discover the world of Focal sound qual-ity via a line that reconciles technology,performance and affordability. Thefamiliar Focal character and phi-losophyof“TheSpiritofSound”isdisplayedbyourtypicalattentiontodetailateverydevelopmentandmanufacturingstage.The essential component istheinverteddomealuminumtweeter with its richness oftimbre andability to repro-duce amazing image de-tails.Itsinclusionrepresentsour success at a true chal-lenge:howtobringauniqueFocaltechnologyintoamoreaffordablemarketsegment.Atthesametime,thewoofersandsubwoofers combine high sen-sitivity and high power handlingand the humidity resistant wovenfiberglassconecombinesthedynam-icsandprecisionofthemid-rangewhileofferingadeepandarticulatedbass.

Access™ 1Access the musicalityExperience the sensation!

All weather woven fiberglass cone TheAccesswoofersarebuiltwithalightandstiffcone,andcoupledwithabutylrubbersurroundofferadegreeofqualityneverbeforeencounteredatthispricelevel.Thespecialallweatherconewillperforminhotandhumidenviron-mentswithoutdistortionorwarping.Thewoofer’spowerhandlingandreliabilityareremarkablethankstodeliberatelyoversizedvoicecoils,whichresultindeepandaccuratebass.

Tweeter TN 44Aluminuminverteddometweetertechnologyofferssignifi-cantrigidityandlowersdistortion.Idealaircoupling,the

mainadvantageoftheinverteddomeshape,allowsaverywidesoundstageandveryaccurateimage.Thisdiffersfromaconvex(traditional)domethatismovingmoreonitsperipherythanonitscen-tercausingaweakcoil/domeenergytransfer.

CrossoverFocal’sphilosophytowardsuncompromising

qualityrequirementscarriesovertotheAccesscrossovers.Highqualitypolypropylenecapacitors

deliverhighanddistortionfreedynamics.Levelcontrolsavailableinthe2-waysystemsallowforrefinedtuningofthe

tweeterinalllocations.

Computer aided Access design

100 CA1 130 CA1 165 CA1






Tweeter Aluminuminverteddome Aluminuminverteddome Aluminuminverteddome

Woofer 100mm(4”),Allweatherwovenfiberglasscone

130mm(5”),Allweatherwovenfiberglasscone

165mm(6.5”),Allweatherwovenfiberglasscone

Magnet 70mm(2.8”) 85mm(3.3”) 85mm(3.3”)

Voice Coil 25mm(1”) 25mm(1”) 25mm(1”)


Mounting Depth 53mm(2.1”) 56mm(2.2”) 66mm(2.6”)

> 165mm(6.5”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.Combines excellent power handling, dynamics, bass quality and good sensitivity. It will also allow direct connection to a high power head unit.

165 CA1

> 100mm(4”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.Great performance in factory-installed locations.

100 CA1> 130mm(5”)coaxialkitwithbuilt-incrossoverandrotating

tweeter.Grillesincluded.The 25 mm (1”) voice coil combined with the 85 mm (3.3”) magnet provides high power handling as well as extremely dynamic sound.

130 CA1

Experience the Focal sound in factory-installed locationsAccess CA1

Adjustable Aluminum inverted dome tweeter Soundstage optimization

20% fiberglass filled ABS chassisRigid, non-magnetic and non-resonant basket

All weather woven fiberglass cone Dynamic bass and humidity resistant,

accurate midrange

Built-in voice coil cooling system Optimal reliability, power compression

cancellation

Butyl surround Consistent performance

210 CA1 570 CA1 690 CA1






Tweeter Aluminuminverteddome Aluminuminverteddome Aluminuminverteddome


130x180mm(5x7”),Allweatherwovenfiberglasscone

164x235mm(6x9”),Allweatherwovenfiberglasscone

Magnet 100mm(4”) 85mm(3.3”) 90mm(3.3”)

Voice Coil 30mm(1.2”) 25mm(1”) 30mm(1”)

Cut-out Diameter 186mm(7.3”) 127x182mm(5x7”) 149x222mm(5.8x8.7”)

Mounting Depth 85mm(3.4”) 60.5mm(2.4”) 93mm(3.6”)

> 130x180mm(5x7”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.Especially made for Ford, Jaguar and Mazda.

570 CA1

> 210mm(8.3”)coaxialkitwithbuilt-incrossoverandrotatingtweeter.Grillesincluded.Specifically made to be installed on the parcel shelf and to give very high quality bass frequencies.

210 CA1

> 164x235mm(6x9”)coaxialkitwithbuilt-incrossover,androtatingtweeter.Grillesincluded.The ideal add-on to your system in the rear deck location.

690 CA1

Adjustable Aluminum inverted dome tweeterSweet and accurate treble

All weather woven fiberglass coneDynamic bass, humidity resistant

and accurate midrange

Voice coil cooling chassis system Reliability, consistent performance

Adjustable tweeter level control Tweeter level control according to location

85 mm (3.3”) magnet High efficiency

> 130mm(5”)2-waykitwithseparatecrossoverwithtweeterlevelcontrol.Grillesincluded.Combines dynamics, a large soundstage, sweet and accurate treble and punchy bass.

130 A1

> 165mm(6.5”)2-waykitwithseparatecrossoverwithtweeterlevelcontrol.Grillesincluded.The Access line’s defining reference combines high power handling, extended low frequency response, large soundstage, high dynamics and high efficiency. It will even allow direct connection to a high power head unit.

165 A1

Dynamics and soundstageAccess A1

130 A1 165 A1 BUS 20 BUS 25

Maximum Power 100W 120W Maximum Power 120W 120W

Nominal Power 50W 60W Nominal Power 60W 60W

Sensitivity (2.83 V/1m) 91dB 92dB Phase Selector 0˚to180˚ 0˚to180˚

Frequency Response (+/- 3 dB) 65Hz-20kHz 60Hz-20kHz Frequency Response 50-400Hz 50-400Hz

Nominal Impedance 4Ohm 4Ohm Maximum Current 12A 12A

Tweeter TN44Aluminuminverteddome TN44Aluminuminverteddome Low-pass Filter 50-100Hz 50-100Hz


165mm(6.5”),Allweatherwovenfiberglasscone Woofer 20cm(8”),Allweather

wovenfiberglasscone25cm(10”),Allweatherwovenfiberglasscone

Magnet 85mm(3.3”) 85mm(3.3”) Remote Control Included Included




Controls Tweeterlevel:0,-3,-6dB Tweeterlevel:0,-3,-6dB

> 25cm(11”)AllweatherwovenfiberglassconesubwooferExcellent compromise between size and performance. Offers good dynamics as well as high power handling.

25 A1

> 30cm(13”)AllweatherwovenfiberglassconesubwooferExtended frequency response in bass without distortion.

30 A1 DB

Power handling and dynamicsAccess A1 Subwoofers

Self regulated voice coil cooling system Optimal reliability, consistent performance

4 layer voice coil Very high power handling

145 mm (5.7”) magnet High efficiency

> Bass-reflexsubwooferenclosure,flaredventreducesairnoise.25cm(10”)driveunit.Combines an extended low frequency response with solid bass and high power handling. Dimensions: 11.8” x 13.8” x 16.7”

SB 25 A1> Bass-reflexsubwooferenclosure,flaredventreduces

airnoise.30cm(12”)driveunit.Combines deep bass, high sensitivity and high power handling. Dimensions: 14” x 15.3” x 20.7”

SB 30 A1

25A1 30 A1 30 A1 DB SB 25 A1 SB 30 A1

Load Vented Vented Sealed Vented Vented


30-60liters(1.059-2.119Ft3)

25-40liters(0.883-1.413Ft3)

Maximum Power 400W 500W 500W 400W 500W

Nominal Power 200W 250W 250W 200W 250W

Sensitivity (2.83 V/1m) 92dB 94dB 91dB 92dB 94dB

Frequency Response (+/- 3 dB)* 32Hz-500Hz 27Hz-500Hz 25Hz-500Hz 42Hz-500Hz 40Hz-500Hz

Nominal Impedance 4Ohm 4Ohm 2x4Ohm 4Ohm 4Ohm

Subwoofer25cm(11”),Allweatherwovenfiberglasscone

30cm(13”),Allweatherwovenfiberglasscone




Magnet 145mm(5.7”) 145mm(5.7”) 170mm(6.7”) 145mm(5.7”) 145mm(5.7”)

Voice Coil 50mm(2“) 50mm(2“) 65mm(2.5“) 50mm(2“) 50mm(2“)

Cut-out Diameter 232mm(9.1“) 275mm(10.8“) 275mm(10.8“)

Mounting Depth 118mm(4.6“) 134mm(5.3“) 134mm(5.3“)

* Depending on load

> 30cm(13”)AllweatherwovenfiberglassconesubwooferIts high sensitivity (94 dB) lends itself to high SPL.

30 A1

> Die-castaluminumenclosurewith20cm(8”)subwooferandbuilt-inamplifier.Remotecontrolincluded.Features high and low level inputs to directly connect to head unit. Dimensions: 13.7” x 9.5” x 2.9”

BUS 20> Die-castaluminumenclosurewith25cm(10”)

subwooferandbuilt-inamplifier.Remotecontrolincluded.Features high and low level inputs to directly connect to head unit. Dimensions: 14.6” x 10.9” x 3.2”

BUS 25

CAR AUDIO PRODUCTS Fall 2008 Vol. 1

Documents

· > R&D center > 500 m3 . anechoic chamber > Two listening rooms >Drive unit and tweeter production area > Car audio assembly unit > Utopia series assembly > Home audio assembly