- , - 364002 ( )
CSIR-CENTRAL SALT & MARINE CHEMICALS RESEARCH INSTITUTE Gijubhai Badheka Marg, Bhavnagar - 364 002, Gujarat (India)
./ Phone: 91-0278-2563805, 2567760, ./ Fax: 91-0278-2572354, 2566970 - / e-mail: E-mail: [email protected]; [email protected]
, All communications to be addressed to the Director, CSMCRI and not in the name of any officer
/ REQUEST FOR QUOTATION
To:
. Enquiry No.:
IMP(118)/5/2017-18/PB/T-10
/ Date: 11-08-2017
Due Date: 12-09-2017 ( 5.00
)
Date of Opening 13-09-2017 ( 3.00 )
, ( )
Dear Sir, The Director, CSMCRI Bhavnagar invites quotation (under two bid system) for the procurement of the following items.
. .
Sr. No.
Description of Material
Quantity
1 Potentiostat/Galvanostat
Detail Specification attached 1 Nos.
Please furnish all the information regarding your bank details for electronic mode of payment.
, Sr.No.3 4 , :
Terms and conditions including instructions to bidders and conditions of contract are attached. However, Terms & Conditions at Sr.No.3 and 4,
stands modified and may be read as under:
: - 10% ( . 12 ) Note: - The successful bidder will have to submit the PBG for 10% of PO Value. (Please see T & C No. 12)
: / 12/09/17 5.00 13/09/17 3.00 -
-
.DUE & OPENING DATES: The Offer/Quotations must reach at CSMCRI on or before 12/09/17 to 5.00 P.M. sharp. The tenders will be opened next day 13/09/17 at 3.00 P.M. in the presence of bidders, who wish to present themselves at the time of opening of tender. In
case opening date happens to be a holiday, the tender will be opened on next working day at the same time & location. The price bids of two
bid tender system shall be opened after technical evaluation of technical bids. The date of opening of price bids shall be informed to the bidders
found suitable in technical evaluation.
. 25,000/- / / / ( / | . |) ,
, 225 - ( )
/ , , / , , -
( ) |
EARNEST MONEY DEPOSIT (EMD): EMD for an amount of 25,000/- in the form of RTGS/NEFT (detail of account attached also please note that while doing RTGS/NEFT in remarks mention the EMD for tender no.Also attach documentary evidence which include UTR No.),. Bank guarantee
or Term Deposit Receipt/FDR of a scheduled bank pledged in the name of Director, Central Salt & Marine Chemicals Research Institute,
Bhavnagar valid for 225 days from the date of opening of the tender for the required amount as mentioned in the tender notice separate for each item must be submitted along with the quotation (with the technical bid in case of two-bid system and photocopy of the same enclosed
with the price bid), otherwise quotation may not be considered. The firms registered with DGS&D, NSIC, Govt. Public Undertakings, Central Autonomous Bodies and with the CSIRLabs./Instts, if any, as manufacturer for the supply of the same category of item for which the party is
submitting quotation will be exempted from submission of EMD. Exempted parties will have to give proof of registration along with their
quotation. EMD of the unsuccessful bidders shall be refunded at the earliest but latest within 15 days after finalization of the purchase of
concerned item. The party must therefore, submit a pre-receipted Bill in triplicate along with the quotation (in case of EMD sent in form of Bank
Draft, to enable us to refund their EMD. Please note that EMD in any other format other than above will not
be consider and bid will be rejected.
Stores & Purchase Officer
For future reference/enquires: you are requested to get yourself register on following links:
1). For GeM- https://gem.gov.in/register/supplier/signup
(For Help, visit https://gem.gov.in/sellerRegisterGuide )
2). For E-procurement:- https://etenders.gov.in/eprocure/app
and share user id to us.
For detail notification you may visit our website www.csmcri.res.in
Annexure-I
Specification for potentiostat/ Galvanostat
Parameters Requirements
Mode Potentiostat/Galvanostat
Compliance Voltage 12V
Potential control (Potentiostatic) :
Max Applied Potential 10V (Min)
Resolution At least 0.002% of full range
Accuracy 0.01% of range
Max/Min Scan Rate At least 5 mV/Sec to 10 kV/Sec
Current Control (Galvanostatic)
Applied Current Range 200 mA (At least or better) with minimum range
05 nA or better.
Resolution At least 0.002% of the current range.
Accuracy 0.2% of range
Voltage Measure
Measured Potential Range 10V
Measured Potential Resolution At least 0.002% of full range
Accuracy 0.2% of range
Current Measure
Measured Current Range 200 mA (At least or better) with minimum range
100 pA or better.
Measured Current Resolution At least 0.002% of the current range.
Accuracy 0.2% of range
System
Potentiostat Bandwidth MHz or etter @ K , A Potentiostat rise/fall time (without load) 800 nS or better
Input impedence of electrometer 1012 // 8 PF or etter Interface USB
A/D convertor 16 bits
iR Compensation Automatic.
Software features: Software up-gradation should be provided free of
cost whenever available.
Minimum Required Facilities:
Capability of saving all or selected cycle in CV.
CV simulation and fitting.
Individual axis scaling.
Overlay.
Multiple Y Axis.
Plot addition.
Zooming and rotation.
Appropriate data analysis tools.
Electrochemical Techniques: The system must have at least following
techniques.
Voltametry: LSV, CV, Normal, differential/ double
and triple pulse voltammetry using various
waveforms (Linear, Pulse, Step).
Chronotechniques: Chronoamperometry.
Chronopotentiometry & Chronocoulometry.
PC and UPS Compatible PC from any standard brand with at
least o itor. 500 KV UPS with at least 30 minutes backup.
Warranty and servicing:
ears sta dard arra t fro the date of i stallatio . All ser i g should e pro ided i the usto ers pre ises. I o l ertai e eptio al ases the i stru e t a e take to the suppliers fa tor situated within India on consent of competent authority of CSIR-CSMCRI.
Note: In case of any discrepancy between above specification and terms and condition
including instruction to bidder and condition of contract. The terms and condition on this
specification sheet will prevail.
(TERMS & CONDITIONS INCLUDING INSTRUCTION TO BIDDERS AND CONDITIONS OF CONTRACT)
1. GENERAL: Quotations in sealed cover are invited on behalf of the Director, Central Salt & Marine Chemicals Research Institute, Bhavnagar from the reputed Indian and foreign manufacturer The offer/ quotation must be strictly as per required specifications and the tender terms & conditions. One Indian Agent can participate in a tender on behalf of one manufacturer. The offer(s) will not be entertained if the same Indian Agent is representing more than one foreign principal manufacturer.
2. SUBMISSION OF OFFERS: a. Quotation should be submitted directly by the original manufacturer/supplier or its sole authorized distributor/dealer. b. The quotation should be addressed to the Director, Central Salt & Marine Chemicals Research Institute, Bhavnagar and sent to the Stores & Purchase Officer. c. Each offer/quotation should be kept in separate envelope against each item of the tender notice. d. The offer/quotation should be submitted in two separate envelopes containing Techno-Commercial bid and Price bid and these put in one envelope. In
case firms submitting bids in a single envelope against the requirement of two-bid system, it would be considered for further evaluation at the risk & responsibility of the bidder.
e. The outer cover containing the offer/quote should be super-scribed with our tender No., due date and date of opening of tender. f. The Techno-commercial offers must contain the Technical Leaflets/literature and complete specifications of the quoted model(s) of the item along with commercial
terms & conditions, compliance statement of specifications & Compliance statement of tender terms & conditions and the required amount EMD. g. Kindly mention the source from where NIT was made available to you i.e. CSMCRI website, CSMCRI letter or specify if any other source.
h. Bidders must submit duly signed and stamp tender acceptance letter on their letterhead as per Annexure I 3. DUE & OPENING DATES: The Offer/Quotations must reach at CSMCRI on or before _________ up to _____ P.M sharp. The tenders will be opened next day i.e.
________ at ________ P.M. in the presence of bidders, who wish to present themselves at the time of opening of tender. In case opening date happens to be a holiday, the tender will be opened on next working day at the same time & lo
