Upload
vodung
View
215
Download
2
Embed Size (px)
Citation preview
• Gutters
• Rainwater Pipes
• Meridian Coping System
• Purpose Made and Specialist Profiles
• Full Design Service
CI/SfB (52)
May 2005
This literature has been supplied in PDF format.To arrange delivery of a full set of literature for your library, for consultation withDales Technical Department or to arrange a meeting with your local advisor pleasetelephone Dales on: 0115 930 1521.
2
A C O M P R E H E N S I V E
s p e c i f i c a t i o n a n d m a n u f a c t u r i n g s e r v i c e . des ign,
introduct ion
Through a combination of experience and specialist technical
expertise, Dales Fabrications Ltd have been manufacturing a
comprehensive range of low maintenance eaves products for over
25 years. Extensive engineering experience combined with a passion
for quality and a desire for technical innovation has meant that
Dales remain a high quality and reliable source of low
maintenance eaves products.
This literature has been designed with the intention that it will help
you to specify Dales' products without complication.
If you would like any assistance with a specific project,
or have any comments about how this brochure can be
revised to further enhance the service offered by Dales,
please e-mail:- [email protected]
CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
TECHNIC AL INFORMATIONMaterials & Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Lightning Conductivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Roof Drainage and Gutter System Design . . . . . . . . . . . . . . . . . . . .4
Loadings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Thermal Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
System Fixings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Curved Gutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Faceted Gutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PEACE OF MINDDales Web site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
The Environment and Dales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ISO 9001: Design and manufacture . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Professional indemnity insurance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
NBS GUIDANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
DATA SHEETSRiver Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Ogee Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Delta Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Nene Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Box Range: System 75/120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Torent Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Classic Gutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Domestic/Strongline Gutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
HR Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Square Aluminium Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Rectangular Aluminium Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Round Aluminium Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
PROJECT GALLERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18-19
Mater ia ls
Se lect ion of mater ia ls
Our experience both as engineers and manufacturers allows
us to select the most appropriate material type and material
thickness for each project.
The majority of projects utilise polyester powder coated
aluminium for exposed eaves gutters, but use mill-finish aluminium
if the gutters are hidden.
Dales provide membrane lined gutters for use in valley
and insulated applications.
Alumin ium Systems
Aluminium is usually the first choice material for the design and
manufacture of low maintenance gutters and pipes. It has a high
strength to weight ratio and is highly resistant to corrosion.
It is a proven material in this application and provides a high level
of design flexibility.
It can be precision manufactured and gives a high quality
surface finish. It is available in a range of low maintenance finishes
and unlike some very popular gutter materials is 100% recyclable,
a process which can save up to 95% of the original energy input.
Whether it's a complete eaves system, a simple gutter, or a complex
solar shading system Dales Fabrications Ltd offers the specifier a
comprehensive design, specification and manufacturing service.
Suitably qualified engineers design products under the auspices of the
quality assurance standard for design and manufacture: ISO 9001.
Each project is assigned to an individual engineer under a Project
Management system. This offers the specifier a continuous, accountable
technician from initial contact through to project completion.
Fin ishes
There are three main finishes than can be applied to aluminium.
These are polyester powder coating, PVF2 and anodising.
Polyester powder coat ing
Easily the most popular choice for aluminium coating. It offers
significant low maintenance life and a wide colour range, including
attractive metallic finishes. Dales only use coaters approved by
polyester powder manufacturers and only those that are ISO 9002
quality assured. All coating is to BS 6496. For a current colour
swatch, please contact Dales Project Management Team.
PVF2
Less widely used in the UK than polyester powder coating but PVF2
is still the preference of some clients and specifiers. PVF2 is a two or
three part wet spray coating which is applied after components are
manufactured. It does give significant low maintenance life but the
pricing system for each colour is not consistent. Dales do not use
pre-coated sheet for their PVF2 coated systems.
Anodised
A chemical process requiring a higher priced grade of aluminium
than those used for paint finishes. Whilst anodising gives significant
low maintenance life, only a comparatively limited colour range
is available.
Technica l Informat ionD A L E S
3
4
Lightn ing Conduct iv i ty
Dales aluminium gutters and down-pipes can usually be rendered
electrically continuous using the dales lightning conductivity clip, as
part of a lightning protection system. This can be discussed with a
Dales project manager and a detail can be provided.
Aluminium gutters and pipes are not suitable as the sole lightning
protection system for any building and should only be utilised as
part of an overall lightning protection design. Specifiers should refer
to the latest revision of BS 6651: Protection of structures against
lightning for further information.
Roof Dra inage and Gutter System Des ign
Dales operate a project management system with suitably qualified
and experienced engineers. These project managers will provide a
gutter system designed to suit your individual project requirements
incorporating gutter and outlet and positioning advice in
accordance with BS EN 12056-3 for a given design rate of rainfall.
To use this service please contact a member of our project
management team. For additional information on the project
managers role, please refer to page 7.
All published flow capacities contained in this literature are
calculated in accordance with the recommendations contained in
BS EN 12056-3: 2000. Dales policy is not to issue high, although
genuine, experimental results which include no margin of safety.
D A L E STechnica l Informat ion
Loadings
Dales gutter systems are
designed to accommodate
loadings in excess of those
induced when the system is
operating at full capacity. Snow
guards are recommended where
sliding snow may cause impact
loading in excess of normal
design criteria.
(see BS EN 12056-3: 2000
National Annex NB clause NB.4)
Thermal Movement
Dales design all systems to accommodate the extremes of
temperature typical of the UK. For overseas projects, the extremes of
temperature specific to each country are used as the design criteria.
System F ix ings
The fixings that secure any system are potentially its weakest link.
Dales have researched their chosen fixings carefully with salt spray
tests where appropriate to investigate any possible incompatibilities.
The fixings are supplied as part of the system and their performance
is appropriate to the life of the system. All seen fixings are
pre-coated to colour match the coated products.
Cur ved Gutters
Dales are able to design and manufacture gutter systems that are a
pure curve in plan, provided they are rectangular or square in cross
section. These systems create interesting design issues and should be
discussed thoroughly with the technical services department before
detail drawings or specifications are finalised.
Faceted Gutters
Where a curve in plan involves a non-rectangular or square section,
i.e. raking or moulded front face, a specially designed facet may
provide a most satisfactory solution.
Curved Gutter Faceted Gutter
Peace of MindD A L E S
BS EN ISO 9001: Des ign & Manufacture
Dales Fabrications Ltd have been working within the constraints of
BS EN ISO 9001 accreditation since 1993.
Dales Quality Policy Statement "It is the policy of this management
to allocate resources for the continuous improvement of its business
activities. This will enable the company to compete successfully at home
& abroad and also ensure that we meet the rising expectations of our
customers".
Profess ional Indemnity Insurance
Dales Fabrications Ltd hold full Design/Professional Indemnity Insurance
with a first class security in the London market. This allows architects
and specifiers to use our products with confidence.
Relevant Standards
The impact of new harmonised European standards means that many of
the equivalent British Standards are currently in a state of flux.
At present some of the British Standards referred to in this brochure are
obsolescent, but are still the only relevant standards.
Further information is contained in our RIBA approved CPD seminar; ‘BS
EN 12056-3: 2000 Roof drainage, layout and calculation’. To arrange a
seminar at your practice, or to obtain further information on the current
situation with regard to the British Standards for gutters and pipework,
please contact our technical department on Tel: 0115 930 1521 or
Email: [email protected]
NBS Guidance
The NBS specification clauses within Dales product literature have been
compiled in collaboration with NBS Services Ltd using NBS Plus project
specifications based on the National Building Specification.
The clauses are intended to enable the contractor to clearly identify the
product required, and the work involved in installation. (The contractor
is required to comply with Dales’ sitework instructions by NBS
Preliminaries clause A33 / 130).
Ind iv idual Pro ject Spec i f icat ions
Any member of Dales Project management team will be pleased to
review any completed NBS clause to ensure compliance with this
guidance. Alternatively, we are happy to provide complete NBS
specification clauses tailored to suit your individual project
requirements. For more information please contact Dales project
management team on Tel: 0115 930 1521.
NBS Spec i f icat ion Ser v ices
NBS Plus subscribers go to www.nbsplus.co.uk and search for Dales
under ‘The Content’ in the ‘Manufacturers’ drop down menus.
& t h e D a l e s W e b S i t e
Specifying via the Dales Website
Our website gives the designer a unique opportunity to view and
specify products to suit their individual project requirements.
You can access Dales Website at www.dales-eaves.co.uk
You will see as you navigate through the site that every
product has a link to an NBS Specification, which can be
copied and pasted directly into your documents.
The Env i ronment and Dales
Dales Fabrications operate an
environmental policy and seek to
reduce the impact of our products and
processes on the environment to a minimum.
Dales Fabrications ensure that all aluminium and steel
waste occurring as a result of our manufacturing processes is
sent for re-cycling. Continuous investment in the latest
CAD/CAM technology ensures that material usage is
optimised, reducing waste to minimum levels.
Our policy is to obtain wholly re-cycled aluminium sheet
and extrusions where available. Our factory utilises energy
efficient machinery and lighting and waste paper is saved
for re-cycling by a local firm.
Whilst protection of our materials during transit is
paramount, regular assessments are carried out to keep
packaging materials to a minimum.
5
Visit www.dales-eaves.co.uk to download latest NBS specifications
R iver RangeThe River Range of aluminium gutters were developed in response tocustomer demand for a contemporary version of the ‘ogee’ gutterprofile. The systems are direct fixed to the fascia, eliminating theneed for support brackets.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
AvonGutter Capacity: 2.53 l/s101 x 76mm Outlet Capacity: 3.70 l/s76.2mm Sq Outlet Capacity: 2.85 l/s76.2mm dia Outlet Capacity: 2.28 l/s
Der wentGutter Capacity: 1.36 l/s76.2mm Sq Outlet Capacity: 2.02 l/s76.2mm dia Outlet Capacity: 1.61 l/s
TrentGutter Capacity: 6.83 l/s101.6mm Sq Outlet Capacity: 6.43 l/s101.6mm dia Outlet Capacity: 5.23 l/s101 x 76mm Outlet Capacity: 4.76 l/s76.2mm Sq Outlet Capacity: 3.60 l/s76.2mm dia Outlet Capacity: 2.88 l/s
Wel landGutter Capacity: 5.27 l/s101.6mm Sq Outlet Capacity: 6.13 l/s101.6mm dia Outlet Capacity: 4.99 l/s101 x 76mm Outlet Capacity: 4.54 l/s76.2mm Sq Outlet Capacity: 3.43 l/s76.2mm dia Outlet Capacity: 2.74 l/s
6
DECRIPTION DETAILS TRENT WELLAND AVON DERWENTGutter Length 3m TR-01-000-X WE-01-000-X AV-01-000-X DE-01-000-XCornersInternal 90º TR-05-090-I WE-05-090-I AV-05-090-I DE-05-090-I
135º TR-05-135-I WE-05-135-I AV-05-135-I DE-05-135-IExternal 90º TR-05-090-E WE-05-090-E AV-05-090-E DE-05-090-E
135º TR-05-135-E WE-05-135-E AV-05-135-E DE-05-135-EOutletsRound 76.2 TR-04-076-D WE-04-076-D AV-04-076-D DE-04-076-D
101.6 TR-04-101-D WE-04-101-D AV-04-101-D DE-04-101-DSquare 76.2 TR-04-076-S WE-04-076-S AV-04-076-S DE-04-076-S
101.6 TR-04-101-S WE-04-101-S AV-04-101-S DE-04-101-SJoint Straps - TR-02-000-X WE-02-000-X AV-02-000-X DE-02-000-XStopends Left Hand TR-03-000-L WE-03-000-L AV-03-000-L DE-03-000-L
Right Hand TR-03-000-R WE-03-000-R AV-03-000-R DE-03-000-RBrackets - - - - -
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
150
205
142
185
100
152
75
133
PROFILES
Internal Corner OutletsJoint Strap Stop Ends External Corner
R i ver RangeD A L E S
Visit www.dales-eaves.co.uk to download latest NBS specifications
Descr ipt ionThe Dales Ogee range is an ideal choice for refurbishment projects orwhere a traditional appearance is sought.
The visual lines of the system are further enhanced by Dales uniqueoverstrap joint system resulting in no visible fixings on the seen faces.The method of jointing allows for the high coefficient of expansion ofaluminium. This combined with the method of fixing the system,ensures trouble free joints.
The Dove gutter system fixes directly to the fascia, eliminating theneed for support brackets.
The Severn gutter, however, utilises the top-fix internal bracket systemachieving a rigid profile whilst still providing an uninterrupted line tothe eaves.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
Dales Dove GutterGutter Capacity: 4.21 l/s101.6mm Sq Outlet Capacity: 5.75 l/s101.6mm dia Outlet Capacity: 4.60 l/s76.2mm Sq Outlet Capacity: 3.16 l/s76.2mm dia Outlet Capacity: 2.53 l/s
Dales Severn GutterGutter Capacity: 7.35 l/s101.6mm Sq Outlet Capacity: 6.54 l/s101.6mm dia Outlet Capacity: 5.32 l/s76.2mm Sq Outlet Capacity: 3.66 l/s76.2mm dia Outlet Capacity: 2.93 l/s
DECRIPTION DETAILS SEVERN DOVEGutter Length 3m SE-01-000-X DV01-000-XCornersInternal 90º SE-05-090-I DV05-090-I
135º SE-05-135-I DV05-135-IExternal 90º SE-05-090-E DV05-090-E
135º SE-05-135-E DV05-135-EOutletsRound 76.2 SE-04-076-D DV04-076-D
101.6 SE-04-101-D DV04-101-DSquare 76.2 SE-04-076-S DV04-076-S
101.6 SE-04-101-S DV04-101-SJoint Straps - SE-02-000-X DV02-000-XStopends Left Hand SE-03-000-L DV03-000-L
Right Hand SE-03-000-R DV03-000-RBrackets - SE--06-000-X -
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
PROFILES
Internal Corner OutletsJoint Strap Stop Ends External Corner Internal Gutter Bracket
7
Ogee RangeD A L E S15
6
212
112
148
8
Visit www.dales-eaves.co.uk to download latest NBS specifications
Descr ipt ionThe Delta Range combines the low maintenance life expected ofaluminium gutter systems with high capacities and comparatively lowcosts.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
Dales Del ta 150Gutter Capacity: 10.36 l/s152.4mm dia Outlet Capacity: 14.34 l/s101.6mm Sq Outlet Capacity: 6.62 l/s101.6mm dia Outlet Capacity: 5.38 l/s
Dales Del ta 200Gutter Capacity: 17.66 l/s152.4mm dia Outlet Capacity: 17.25 l/s101.6mm Sq Outlet Capacity: 7.46 l/s101.6mm dia Outlet Capacity: 6.07 l/s
Dales Del ta 100Gutter Capacity: 4.83 l/s101.6mm Sq Outlet Capacity: 5.40 l/s101.6mm dia Outlet Capacity: 4.35 l/s76.2mm Sq Outlet Capacity: 3.07 l/s76.2mm dia Outlet Capacity: 2.46 l/s
Dales Del ta 125Gutter Capacity: 6.72 l/s101.6mm Sq Outlet Capacity: 6.13 l/s101.6mm dia Outlet Capacity: 4.99 l/s76mm Sq Outlet Capacity: 3.43 l/s76mm dia Outlet Capacity: 2.74 l/s
112
153
137
154
162
188
202
223
PROFILES
Internal Corner OutletsJoint Strap Stop Ends External Corner
De l ta RangeD A L E S
DECRIPTION DETAILS DELTA 200 DELTA 150 DELTA 125 DELTA 100Gutter Length 3m D4-01-000-X D3-01-000-X D2-01-000-X D1-01-000-XCornersInternal 90º D4-05-090-I D3-05-090-I D2-05-090-I D1-05-090-I
135º D4-05-135-I D3-05-135-I D2-05-135-I D1-05-135-IExternal 90º D4-05-090-E D3-05-090-E D2-05-090-E D1-05-090-E
135º D4-05-135-E D3-05-135-E D2-05-135-E D1-05-135-EOutletsRound 76.2 D4-04-076-D D3-04-076-D D2-04-076-D D1-04-076-D
101.6 D4-04-101-D D3-04-101-D D2-04-101-D D1-04-101-DSquare 76.2 D4-04-076-S D3-04-076-S D2-04-076-S D1-04-076-S
101.6 D4-04-101-S D3-04-101-S D2-04-101-S D1-04-101-SJoint Straps - D4-02-000-X D3-02-000-X D2-02-000-X D1-02-000-XStopends Left Hand D4-03-000-L D3-03-000-L D2-03-000-L D1-03-000-L
Right Hand D4-03-000-R D3-03-000-R D2-03-000-R D1-03-000-RBrackets - D4--06-000-X D3--06-000-X D2--06-000-X D1--06-000-X
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
9
Visit www.dales-eaves.co.uk to download latest NBS specifications
Descr ipt ionThe Dales Nene gutter system is an attractive heavy duty aluminiumsystem of elegant simplicity combining functional requirements withmany practical and design benefits.
Its large throat means that a wide variety of eaves configurations canbe accommodated whilst its large cross sectional area results in highhydraulic capacity.
The system is direct fixed to the fascia, eliminating the need forsupport brackets.
The aesthetic lines are further enhanced by the unique Dalesoverstrap joint system resulting in no visible fixings on the seen faces.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
Dales Nene 2Gutter Capacity: 8.08 l/s101.6mm Sq Outlet Capacity: 6.51 l/s101.6mm dia Outlet Capacity: 5.29 l/s76.2mm Sq Outlet Capacity: 3.64 l/s76.2mm dia Outlet Capacity: 2.91 l/s
Dales Nene 1Gutter Capacity: 3.29 l/s76.2mm Sq Outlet Capacity: 3.06 l/s76.2mm dia Outlet Capacity: 2.45 l/s
PROFILES
Internal Corner OutletsJoint Strap Stop Ends External Corner
Nene RangeD A L E S10
2
157
153
229
DECRIPTION DETAILS NENE 2 NENE 1Gutter Length 3m N2-01-000-X N1-01-000-XCornersInternal 90º N2-05-090-I N1-05-090-I
135º N2-05-135-I N1-05-135-IExternal 90º N2-05-090-E N1-05-090-E
135º N2-05-135-E N1-05-135-EOutletsRound 76.2 N2-04-076-D N1-04-076-D
101.6 N2-04-101-D N1-04-101-DSquare 76.2 N2-04-076-S N1-04-076-S
101.6 N2-04-101-S N1-04-101-SJoint Straps - N2-02-000-X N1-02-000-XStopends Left Hand N2-03-000-L N1-03-000-L
Right Hand N2-03-000-R N1-03-000-RBrackets - - -
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
10
Visit www.dales-eaves.co.uk to download latest NBS specifications
Descr ipt ionBox gutters are generally considered to be the most efficient shape ofgutter giving maximum rainwater removal for any given size. Dalesrange of box gutters have all been designed to give front and bottomfaces visibly free from fixings.
The Dales System 75 and 120 are manufactured from 2mm thickaluminium for heavy duty use giving very high levels of rigidity areachieved.
Joining is by Dales unique overstrap joining system which allows forthe high coefficient of expansion of aluminium, this and the methodof fixing ensures trouble free joints whatever the temperature. Thejoining system has no fixings on any seen face therefore enhancingthe neat line of the gutter.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
Dales System 120Gutter Capacity: 5.48 l/s101.6mm Sq Outlet Capacity: 5.94 l/s101.6mm dia Outlet Capacity: 4.83 l/s76.2mm Sq Outlet Capacity: 3.32 l/s76.2mm dia Outlet Capacity: 2.66 l/s
Dales System 75Gutter Capacity: 3.31 l/s101.6mm Sq Outlet Capacity: 4.10 l/s101.6mm dia Outlet Capacity: 3.31 l/s76.2mm Sq Outlet Capacity: 2.81 l/s76.2mm dia Outlet Capacity: 2.25 l/s
PROFILES
Internal Corner OutletsJoint Strap Stop Ends External Corner
92
139
132
139
Box RangeD A L E S
S y s t e m 7 5 / 1 2 0
DECRIPTION DETAILS SYSTEM 120 SYSTEM 75Gutter Length 3m S1-01-000-X SY-01-000-XCornersInternal 90º S1-05-090-I SY-05-090-I
135º S1-05-135-I SY-05-135-IExternal 90º S1-05-090-E SY-05-090-E
135º S1-05-135-E SY-05-135-EOutletsRound 76.2 S1-04-076-D SY-04-076-D
101.6 S1-04-101-D SY-04-101-DSquare 76.2 S1-04-076-S SY-04-076-S
101.6 S1-04-101-S SY-04-101-SJoint Straps - S1-02-000-X SY-02-000-XStopends Left Hand S1-03-000-L SY-03-000-L
Right Hand S1-03-000-R SY-03-000-RBrackets - - -
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
11
Torent RangeD A L E S
Visit www.dales-eaves.co.uk to download latest NBS specifications
Dales Torent 3 GutterGutter Capacity: 12.33 l/s152.4mm dia Outlet Capacity: 12.88 l/s101.6mm Sq Outlet Capacity: 6.96 l/s101.6mm dia Outlet Capacity: 5.66 l/s76.2mm Sq Outlet Capacity: 3.90 l/s76.2mm dia Outlet Capacity: 3.12 l/s
Dales Torent 1 GutterGutter Capacity: 4.93 l/s101.6mm Sq Outlet Capacity: 5.71 l/s101.6mm dia Outlet Capacity: 4.65 l/s76.2mm Sq Outlet Capacity: 3.20 l/s76.2mm dia Outlet Capacity: 2.56 l/s
Dales Torent 2 GutterGutter Capacity: 9.17 l/s101.6mm Sq Outlet Capacity: 6.97 l/s101.6mm dia Outlet Capacity: 5.67 l/s76.2mm Sq Outlet Capacity: 3.90 l/s76.2mm dia Outlet Capacity: 3.12 l/s
127
208
172
207
172
275
PROFILES
Internal Corner OutletsJoint Strap Stop Ends External Corner Internal Gutter Bracket
Descr ipt ionThe Dales Torent range of gutters have been developed followingcustomer demand for an elegant alternative to box or ogee typegutters. Torent systems utilise internal, top fix gutter brackets thatallow an uninterrupted line to the eaves profile.
The visual lines of the system are further enhanced by the uniqueDales overstrap joint system resulting in no visible fixings on the seenfaces. The method of joining allows for the high coefficient ofexpansion of aluminium. This combined with the method of fixing thesystem, ensures trouble free joints whatever the temperature.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
DECRIPTION DETAILS TORENT 3 TORENT 2 TORENT 1Gutter Length 3m T3-01-000-X T2-01-000-X T1-01-000-XCornersInternal 90º T3-05-090-I T2-05-090-I T1-05-090-I
135º T3-05-135-I T2-05-135-I T1-05-135-IExternal 90º T3-05-090-E T2-05-090-E T1-05-090-E
135º T3-05-135-E T2-05-135-E T1-05-135-EOutletsRound 76.2 T3-04-076-D T2-04-076-D T1-04-076-D
101.6 T3-04-101-D T2-04-101-D T1-04-101-DSquare 76.2 T3-04-076-S T2-04-076-S T1-04-076-S
101.6 T3-04-101-S T2-04-101-S T1-04-101-SJoint Straps - T3-02-000-X T2-02-000-X T1-02-000-XStopends Left Hand T3-03-000-L T2-03-000-L T1-03-000-L
Right Hand T3-03-000-R T2-03-000-R T1-03-000-RBrackets - T3--06-000-X T2--06-000-X T1--06-000-X
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
12
Class ic GutterD A L E S
Visit www.dales-eaves.co.uk to download latest NBS specifications
Dales C lass ic GutterGutter Capacity: 5.36 l/s101mm Sq Outlet Capacity: 5.98 l/s101mm dia Outlet Capacity: 4.86 l/s76.2mm Sq Outlet Capacity: 3.35 l/s76.2mm dia Outlet Capacity: 2.68 l/s13
1
155
PROFILES
Internal Corner OutletsJoint Strap Stop Ends External Corner Internal Gutter Bracket
Da les C lass ic GutterDue to its increasing popularity the Classic has been adapted to suit avariety of situations. An increasingly popular method of support is thetop fix, internal gutter bracket. This has now been adopted as astandard and is usually referred to as the ‘New Classic’.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
DECRIPTION DETAILS CLASSICGutter Length 3m NC-01-000-XCornersInternal 90º NC-05-090-I
135º NC-05-135-IExternal 90º NC-05-090-E
135º NC-05-135-EOutletsRound 76.2 NC-04-076-D
101.6 NC-04-101-DSquare 76.2 NC-04-076-S
101.6 NC-04-101-SJoint Straps - NC-02-000-XStopends Left Hand NC-03-000-L
Right Hand NC-03-000-RBrackets - NC-06-000-X
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
13
Visit www.dales-eaves.co.uk to download latest NBS specifications
Descr ipt ionBoth profiles have proved very popular over the years, becomingstandard specification for many local authority specifiers. This is dueto their attractive appearance, longevity and economy. Whilstoriginally introduced in plastic coated galvanised steel the domesticand strongline are now manufactured as standard in aluminium. Thisoffers a much wider range of colours.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plus
or Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
Internal Corner OutletsJoint Strap Stop Ends External Corner
DECRIPTION DETAILS DOMESTIC STRONGLINEGutter Length 3m DO-01-000-X ST-01-000-XCornersInternal 90º DO-05-090-I ST-05-090-I
135º DO-05-135-I ST-05-135-IExternal 90º DO-05-090-E ST-05-090-E
135º DO-05-135-E ST-05-135-EOutletsRound 76.2 DO-04-076-D ST-04-076-D
101.6 DO-04-101-D ST-04-101-DSquare 76.2 DO-04-076-S ST-04-076-S
101.6 DO-04-101-S ST-04-101-SJoint Straps - DO-02-000-X ST-02-000-XStopends Left Hand DO-03-000-L ST-03-000-L
Right Hand DO-03-000-R ST-03-000-RBrackets - - -
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
Domestic & Strongline GuttersD A L E S
Dales St rongl ineGutter Capacity: 2.47 l/s76.2mm Sq Outlet Capacity: 2.82 l/s76.2mm dia Outlet Capacity: 2.26 l/s
Dales Domest icGutter Capacity: 1.21 l/s76.2mm Sq Outlet Capacity: 1.55 l/s76.2mm dia Outlet Capacity: 1.24 l/s
PROFILES
76
120
104
138
14
HR RangeD A L E S
Visit www.dales-eaves.co.uk to download latest NBS specifications
Descr ipt ionDales HR gutters are a recent addition to the Dales range of guttersystems. The larger profile utilses Dales internal bracket system whilstthe rigidity of the smaller profile means that no brackets are required.
The system is jointed using Dales unique overstrap system whichkeeps the visible sur faces of the gutter free from any fixings.
The gutters offer the appearance of traditional half round systems butwith much greater capacities.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
OutletJoint strap StopendInternal corners External Corner
DECRIPTION DETAILS HR150 HR215Gutter Length 3m R1-01-000-X R201-000-XCornersInternal 90º R1-05-090-I R205-090-I
135º R1-05-135-I R205-135-IExternal 90º R1-05-090-E R205-090-E
135º R1-05-135-E R205-135-EOutletsRound 76.2 R1-04-076-D R204-076-D
101.6 R1-04-101-D R204-101-DSquare 76.2 R1-04-076-S R204-076-S
101.6 R1-04-101-S R204-101-SJoint Straps - R1-02-000-X R202-000-XStopends Left Hand R1-03-000-L R203-000-L
Right Hand R1-03-000-R R203-000-RBrackets - - R2-06-000-XFOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
Dales HR215 GutterGutter Capacity: 6.71 l/s152.4mm dia Outlet capacity: 6.42 l/s101.6mm Sq Outlet Capacity: 5.97 l/s101.6mm dia Outlet Capacity: 4.78 l/s76.2mm Sq Outlet Capacity: 3.29 l/s76.2mm dia Outlet Capacity: 2.63 l/s
Dales HR150 GutterGutter Capacity: 3.32 l/s101.6mm Sq Outlet Capacity: 3.89 l/s101.6mm dia Outlet Capacity: 3.11 l/s76.2mm Sq Outlet Capacity: 2.75 l/s76.2mm dia Outlet Capacity: 2.20 l/s
PROFILES
15
Visit www.dales-eaves.co.uk to download latest NBS specifications
A lumin ium RangeDales Square Aluminium Rainwater Pipes are available as standard ineither 76.2mm or 101.6mm. Other square pipework can be suppliedto order.
Dales standard pipe brackets are designed to fix the pipe ver y close tothe wall and firmly clamp the pipe into position. This makes itvirtually impossible for vandals to climb. Various non standardcomponents e.g offsets, stand off brackets and special hoppers, areavailable to suit customers individual requirements.
Secret F ix P ipeworkDales square pipe is available with secret fixing and internal pipejointing. This pipework offers improved security and very clean lines,for more information please contact our Project Management Teamon Tel: 0115 930 1521.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
101.6 and 76.2mm Square Rainwater P ipeAll pipes are nominal 3000mm long with socket at one end.
PIPE SIZE Wall Thickness PART REF101.6 Sq 2.0 A2-12-000-S76.2 Sq 1.6 A3-12-000-S
PROFILES
Square Pipes Rodding Access PiecePipe Elbow (shoe)
Square Pipe Bracket
Hopper Head
Pipe Connector
Square Aluminium PipesD A L E S
7 6 . 2 / 1 0 1 . 6 m m
Square to Round Drain Adaptor
DECRIPTION DETAILS 76.2MM SQ 101.6MM SQPipe 3m A3-12-000-S A2-12-000-SElbows
92.5º A3-14-092-S A2-14-092-S112.5º A3-14-112-S A2-14-112-S135º A3-14-135-S A2-14-135-S
BracketStandard A3-13-000-S A2-13-000-S30mm S/off A3-13-030-S A2-13-030-S
Sq-Rnd Adaptor A3-18-000-X A2-18-000-XRodding Access A3-15-000-S A2-15-000-SHopper A3-17-000-S A2-17-000-SConnector A3-16-000-S A2-16-000-SAdjustable Offset x < 400 A3-26-040-S A2-26-040-S
x < 600 A3-26-060-S A2-26-060-Sx < 800 A3-26-080-S A2-26-080-Sx < 1000 A3-26-100-S A2-26-100-S
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
16
Visit www.dales-eaves.co.uk to download latest NBS specifications
A lumin ium RangeDales rectangular pipes have square edged corners. Dales standardpipe brackets are designed to fix the pipe ver y close to the wall andfirmly clamp the pipe into position. This makes it virtually impossiblefor vandals to climb. Various non standard components e.g offsets,stand off brackets and special hoppers, are available to suitcustomers individual requirements.
Secret F ix P ipeworkDales rectangular pipe is available with secret fixing and internal pipe jointing.
This pipework offers improved security and very clean lines, for more information please contact our Project Management Team on Tel: 0115 930 1521.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
101.6 x 76.2mm Rectangular Rainwater P ipeAll pipes are nominal 3000mm long with socket at one end.The pipe wall thickness is 2mm.
ToSuit
PROFILES
Rodding Access PiecePipe Elbow (shoe) Square Pipe Bracket
Pipe Connector
Square to Round Drain Adaptor
Hopper Head
DECRIPTION DETAILSPipe 3m A5-12-000-SElbows
92.5º A5-14-092-S112.5º A5-14-112-S135º A5-14-135-S
BracketStandard A5-13-000-S30mm S/off A5-13-030-S
Sq-Rnd Adaptor A5-18-000-XRodding Access A5-15-000-SHopper A5-17-000-SConnector A5-16-000-SAdjustable Offset x < 400 A5-26-040-S
x < 600 A5-26-060-Sx < 800 A5-26-080-Sx < 1000 A5-26-100-S
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
Rectangular Aluminium PipesD A L E S
1 0 1 . 6 x 7 6 . 2 m m
17
Visit www.dales-eaves.co.uk to download latest NBS specifications
A lumin ium RangeDales Round Aluminium Rainwater Pipes are available in a variety ofsizes from 76.2mm up to 152.4mm.
Dales standard pipe brackets are designed to fix the pipe ver y close tothe wall and firmly clamp the pipe into position. This makes it ver ydifficult for vandals to climb.Various non standard components e.g offsets, stand off brackets andspecial hoppers, are available to suit customers individualrequirements.
Accessor iesA wide range of standard components are available (see illustrations),however as manufacturers Dales Fabrications Ltd are able to offerpurpose made components to suit individual project requirements.
Fin ishAll Dales aluminium products are available in the Syntha Pulvin Plusor Interpon D polyester powder coating range of colours. This givesaround 200 colours. For a current colour swatch, please contact ourProject Management Team on Tel: 0115 930 1521.
A full list of the standard colours is available on our web sitewww.dales-eaves.co.uk. For non standard colours, please contact ourProject Management Team on Tel: 0115 930 1521 and they will behappy to discuss your requirements.
76.2/101.6/152.4mm dia Rainwater P ipeAll pipes are nominal 3000mm long with socket at one end.
PIPE SIZE Wall Thickness PART REF152.4 dia 2.5 A1-12-000-D101.6 dia 1.6 A2-12-000-D76.2 dia 1.6 A3-12-000-D
PROFILES
Diameter Pipes Rodding Access PiecePipe Elbow (shoe)
ToSuit
Pipe Connector
Round Pipe Bracket
Round Aluminium PipesD A L E S
7 6 . 2 / 1 0 1 . 6 / 1 5 2 . 4 m m
Hopper Head
DECRIPTION DETAILS 76.2MM RND 101.6MM RND 152.4MM RNDPipe 3m A3-12-000-D A2-12-000-D A1-12-000-DElbows
92.5º A3-14-092-D A2-14-092-D A1-14-092-D112.5º A3-14-112-D A2-14-112-D A1-14-112-D135º A3-14-135-D A2-14-135-D A1-14-135-D
BracketStandard A3-13-000-D A2-13-000-D A1-13-000-D30mm S/off A3-13-030-D A2-13-030-D A1-13-030-D
Rodding Access A3-15-000-D A2-15-000-D A1-15-000-DHopper A3-17-000-D A2-17-000-D A1-17-000-DConnector A3-16-000-D A2-16-000-D A1-16-000-DAdjustable Offset x < 400 A3-26-040-D A2-26-040-D A1-26-040-D
x < 600 A3-26-060-D A2-26-060-D A1-26-060-Dx < 800 A3-26-080-D A2-26-080-D A1-26-080-Dx < 1000 A3-26-100-D A2-26-100-D A1-26-100-D
FOR ADDITIONAL COMPONENTS, PLEASE CONTACT ONE OF OUR PROJECT MANAGERS ON TEL: 0115 930 1521
Components
Pro ject Gal ler yD A L E S
18
Dales Fabrications Ltd have been producing building products for over 20 years. In this period of time we have supplied our products to
thousands of projects around the UK.
Below is a selection of recent projects, if you would like to see further examples of our products or have a specific project in mind please
e-mail your request to: [email protected]. or contact Dales on: Tel: 0115 930 1521 Fax: 0115 930 7625
Pro ject : Queen Mar y ' sHospi ta l , Kent
Architect: Pateman & Coupe.
Product: Aluminium Panel Fascia Soffit & Prestex Solar Shading System.
Pro ject : Lady Bay Reta i lPark , Nott ingham
Architect: Benoy Architects.
Main Contractor:Wilson Bowden Properties Ltd.
Product: Secret Fix AluminiumPanel System.
Pro ject : New Off ices forExper ian,Nott ingham
Architect: Stephen George & Partners.
Main Contractor:Wilson Bowden.
Product: Aluminium Panel Fascia Soffit with Hidden Gutter.
Pro ject : ChippenhamMagist rates Court
Architect: Wiltshire County Council.
Main Contractor: Laing Southwest.
Product: Dales Hurricane 1000 Gutter System.
Pro ject : K ingdownSchool , Warminster
Architect: Wiltshire County Council.
Main Contractor: Sunley Turiff.
Product: Prestex Solar Shading Systemin Aluminium.
Pro ject : Off ices at K ingStreet , Rutherg len
Architect: William Nimmo& Partners.
Main Contractor: Wates Construction Ltd.
Product: Aluminium Kwikfix Fascia Soffit & WellandGutter System.
Pro ject : Gr immitHold ings , WoodgateBus iness Park , B i rmingham
Architect: Henry Mein Partnership.
Main Contractor: Wates Construction Ltd.
Product: Fascia Soffit System withHidden Gutter.
Pro ject : New Off icesfor Scot t i sh CourageBrands, South Gy le ,Ed inburgh
Architect: Gareth Hutchison Architects.
Product: Aluminium Fascia Soffit System with Hidden Gutter.
Copyr ight © 2000 Dales Fabr icat ions L td . Al l r ights reserved .
19
Pro ject : Hulme Soc ia lHous ing, Manchester
Product: Dales Meridian Coping System.
Pro ject : ICS Bui ld ingLoughborough
Product: Kwikfix Fasciaand Soffit with Classic Gutter.
Pro ject : Hernehi l lPr imar y School , Kent
Architects: Concept Architects.
Main Contractor: Jenner Contractors Ltd.
Product: Dales Nordal Aluminium Gutter System.
Pro ject : Off ices atWestpo int Bus iness
Park , Br i s to l
Product: Dales ClassicGutter System with Fascia Soffit.
Pro ject : Paget High
School , Burton-on-Trent
Architects: Staffordshire CountyCouncil Architects.
Main Contractor: Ron Jones Ltd.
Product: Dales Aluminium Fascia Soffit System.
Pro ject : Uni ts forTorotrak Ltd , Lancash i re
Architects: Cassidy & Ashton.
Main Contractor: Conlon Construction.
Product: Dales Aluminium Shadex SolarShading System.
Pro ject : HandsworthCommunity F i re Stat ion,Handsworth ,B i rmingham
Architects: Sandwell MBC Architects.
Main Contractor:Willmott Dixon.
Product: Aluminium Bullnose Fascia with Hidden Purpose MadeGutter with Kwikfix Soffit System.
Pro ject :Hospi ta l i ty Uni t , AyrRacecourse , Ayr
Product: Dales Fascia Soffit System in Aluminium with Delta 100 Box Gutter.
Pro ject : CorporateHeadquarters for St r ix
UK, Is le of Man
Architects: Savage Chadwick.
Main Contractor:Javis (IoM).
Product: Dales Hurricane 1000 Gutter System with Aluminium Fascia Soffit.
Pro ject : Off ices atWestpo int Bus inessPark , Br i s to l
Product: Dales Strongline Gutter System with Fascia Soffit system.
Dales Fabrications LtdCrompton Road, Industrial Estate, Ilkeston, Derbyshire DE7 4BG
Tel: 0115 930 1521 Fax: 0115 930 7625
International Tel: +44 115 930 1521International Fax: +44 115 930 7625website: www.dales-eaves.co.ukemail: [email protected]
Other products available from Dales
Fascia Soffit Systems & the Total Eaves Concept Dales design and manufacture a wide range of fasciasoffit systems that suit both traditional andcontemporary building designs. These designs ofteninclude the integration of rainwater goods andsecondary support to provide complete, lowmaintenance eaves systems.
Details of Dales fascia soffit systems can be found inour ‘Total eaves concepts & solutions’ literature.
Solar Shading and Louvre SystemsDales design and manufacture solar shading systemson an individual project basis. Further information is contained in our ‘Solar Shading and LouvreProducts’ literature.
Nordal Rainwater SystemThe Nordal half round rainwater system is the firstlow maintenance aluminium system that iscomparable to plastic in price. It is particularly suited to social housing projects, as it offersexceptional value for money.
Further information and prices are contained in the‘Nordal - Aluminium Rainwater System’ literature.
Reynobond Aluminium Composite MaterialDales Fabrications are a specialist fabricator and areable to design and manufacture specialist claddings,column casings and other fabrications to suitindividual specifiers requirements.
Additional information is contained in the‘Reynobond - The Creative Material’ literature.
For more information on any of the above productsor a copy of any of the literature referred to, pleasecontact a member of our project management teamon Tel: 0115 930 1521.