6

dvwtcorp.comdvwtcorp.com/sitebuildercontent/sitebuilderfiles/filters.pdf · Created Date: 6/2/2008 4:11:05 PM

Embed Size (px)

Citation preview

i*ir;,rL;i'

*}effi

.....,:.'

*.#

ModelNS-122

1/4" NPToownslream

gauge port

D

l-- A

upstreamgauge pon

TOP VIEW

SIDE VIEW

MODEL A B c D E WT/LBS

15" 7 -1t2" 14" 20-7 t16 ti) 85'15"

7 -1t2" )R" ?a-1 tR" t3 100Adiustable Tripod Stand: 17" l.12" bolt hole circle. Band: 2" wide, 8-5/8" LD

Filtration Systems )verThe-faf design lndustrial Grade Liquid FilterHousings provide the ideal solution for fine filtration or strainingapplications. Compression ol our Zero-Bypasf bag collar between theh0using lid and the top of the supp0rt basket provides a positive 360-degree seal, preventing bypass of unfiltered liquid. Solids are trappedand collected in the bag, eliminating clean up of the vessel interiorduring bag change-out.

Filter housings accommodate a variety of filter media, making themhighly versatile for industrial, pharmaceutical, water, beverage, and otherprocess applications. Individual, Valved Individual, and Multi-HousingSystems accommodate size #1 (7"dia. x 16 long) or #2 (7"dia. x 33 long)filter bags, cartridges, or strainer baskets.

Vessels are T-304 stainless steel or carbon steel, 150psi/300'F, valved ornon-valved. Alternate inlet and outlet connections may be ordered,allowing the vessels to be placed directly in line with existing processpiping.

, , . , allow liquid flow to be shut off at the unit,rather than at a distant source, saving time during media change-0ut.A Low-Prof ile Horizontal 0utlet is a standard feature of Valved.Individual Housings.

::providing increased flow rate capacity by using multiple housings

ModelNS-122-LP-V

valve ^handle L

SIDE VIEW

MODEL A B c D E WT/LBS

tl 1 6-5/1 6' 24" l3-11n6 tc 110

Adjustable Tripod Stand: 17" H,12" bolt hole circle, Band: 2" wide, 8-5/8" l.D.

simultaneously. Valved versions have stainless steel ball valves on the inletand outlet of each vessel, Functioning as shut-otf valves, they isolateindividual housings from the filiering process, allowing continuous serviceof the remaining housings during media removal and replacement.

All Multi-Housing Systems are equipped with two inlet and two outletconnections. Alternate connection ports allow users the option ofchoosing any inlet and outlet site(s) to accommodate space and pipingrequirements. Unused p0rts are sealed with userfurnished blindflanges. Filtration Systems versatile, modular design provides simplifiedinstaliation, equipment expansion, and header inspection and cleaning.Systems are shipped fully assembled, built on a stable frame, andreouire no anchor bolts for installaiion.

,,i ,.' : ,',. i ' i . r:il

}verThe-Top DesignBuilt to ASME Code Standards150psi Max. Working Pressure - 300'F Max. Working TemperatureInvestment Cast Lid and BodyHinged Lid with Handle, Built-in Lid Stop, and Safety DetentsPerforated T-304 S/S Support Basket with Longitudinal TaperGauge Ports, Vent Ports, Drain PortsBuna-N 0-RingsAdjustable Tripod Stand, or Frame

ModelNS-112

eo

,1/4'NPT

1/4'NPT u"nl.Po"

upstream _. '...gauge porr

1,/4 upstreamoratn porl

.. 1

i

I/4'NPTvenl porl

e 1/4'NPTvenr pon

7.*r

ft

l;'i'*e'

=.:*'4;#"

*,8

ModelNS-223-V

1/4'NPTvent pon

ril! E tt 1/4"uostream

i I drain Port

outlet<- oUllel+

'Flow Rates are based on water in a housing without filter media. Actual flow rates are determined by the specific filter media selected, as well as thecharaclerislics of the aoolication. -. For Non-Valved Svstems. subtract 5".

ModelNS-424-V

E EE

<-inlet

;61;#tJ,,gauge port

3/4" NPTdrain port

: g€="

\1/4" NPT\ \uostream '\ \

^.'r^a n^rt \ \

L#'-' I--E'n. c

' '-,9'n' I'-rJ{^\!-:i T

TOP VIEWTOP VIEW

FRONT VIEW

MODELNO. OF

HOUSINGS

FLANGESIZE

(rNcHES)

-MAXIMUMFLOW RATE

(GPM)@ 2.2psid

LIQUID 2TO 12 MODULES AVAILABLEALL DIMENSIONS ARE IN INCHES

SHIPPINGWEIGHT

(LBS)D E G

j 44n 15 6 5 21 A/4 1?/4 4 ?14 2A /4 22 27\j A AAn 24^' 12 4 5 t4 4 2q 4?n

1t2 A t3 37 71 5505 1t4 I /4 t5 58 49 30 680

6 12 ?a 8 t4 t5 70 30 P,207 1ta ?a I /4 15 a2 73 3n q5oR 6 17AO 23 1/4 6 t4 2A I I '15 94 85 io 1 nqnI R 1 980 115.1 12 24 1/4 6 3/4 7 3/4 2A t4 '15 106 97 io 1 :]65'10 It 2200 12 / A ts_l 12 1 24 1t4 63/4 | 7 3t4 81/4 | I tto 109 30 1 !-r:l()

2A)n 1 40.6 5 24 1/4 6 3/4 7 3t4 2A 130 121 io 1 700tz 8 2640 153.4 5 24 1/4 6 3/4 7 3t4 28 81/4 15 142 IJJ 30 1 875

1 INDIVIDUAL:'irf'; 1r.li"*ii 1r fr:ili l. i FILTERVESSELS

VALVED,INDIVIDUALHOUSINGS

NON-VALVEDMULTI-HOUSING

SYSTEMS

VALVED I

MULTI-HOUSING i

SYSTEMS .

FfLTER BAG slzE ' #1(7 dia.x 16 o-g) (7"dia.x 33" lon9)

#2(7"dia.x 33" long)

#2(7"dia.x 33" long) (7"dia.x 33" long)

MAXIMUM FLOW RATE* : 110 gpm(without filter media) i @1.1psjd

22O gpm(4,2.2os1d

220 gpm@,2.2osid

See Dimensional Chart, pg.3

LIQUID VOLUME(gat/water) i 3 6gal 6.6gal 6.9gal See Dimensional Chart, pg.3

CODE STATUS lndustrial GradeBuilt to ASt\.4E Code Standards

MATERIAL OF CONSTRUCTION T-304 S/S or Carbon Steel.Investment Cast Lid &

LID CLOSURE 360" Hinged Closure with Lid Handle, Safety Detents, and Lid Stop

MAXIMUM WORKING PRESSURE 1 50psi

MAXIMUM WORKING TEMPERATURE 300.F

MAXIMUM SUPPORT BASKETDIFFERENTIAL OPERATING PRESSURE

1 00psi

INLET & OUTLET CONNECTIONS

BALL VALVES; 2" FULL PORT,T.316 S/S & TEFLON

HARDWARE

See Dimensional Chart, pg.3

2 per Housing

Blasted Finish. Interior, Exterior & BaskelOne Coat ShoD Primer. Exterior

Plated Carbon Steel Bar Knobs & Eye Bolts

PERFORATED SUPPORT BASKETS T-304 S/S with Longitudinal Taper, 9/64" Perforations (1 per housing)

GAUGE PORTS 1/4" NPT (2 per housing)

VENT PORT 1i4" NPT (l per housing)

i] UPSTREAM DRAIN PORT 1/4" NPT ('l per housing)

DOWNSTREAM DRAIN PORT 3/4" NPT (1 per housing)

O.RINGS

STAND/FRAME

LOW-PROFILE, HORIZONTAL OUTLET Optional

SHIPPTNG wElcr-,rr jLBSI , . u:::. Flow rates are based on water in a housing without

well as the characteristics of the aoolication.

Buna-N. lnstalled

Carbon Steel Frame

Optional

10O lbs See Dimensional Chart, p9.3

filter media. Actual flow rates are determined by the specific filter media selected, as

MATERIAL OF CONSTRUCTIONNS = T-304 S/S, Industrial Grade

Nc : clrbon :teel,.lnduslrial

Grade

VALVED HOUSING OR SYSTEMFiltration Systems Inlet & Outlet

lsolation Valves, T-316 SiSV = Ball Valve, 3-Piece, Full-Port

SV = Sanitary Butterfly Valve\\"

T-316 UPGRADEOptional T-3'16 Stainless Steel

Upgrade, Including S/S Hardware

tli'r

MODIFIEDl\,4odified Equipment,

as per quote or requirement.' ,

-,-"*:::NUMBER OF FILTER HOUSINGS I1 = Individual & Valved, Individual j2-12 = Modular Systems /

tHOUSING SIZE / FILTER BAG SIZE

2 = #2 Size (7" Dia. x 33" Long)1 = #1 Size (7" Dia. x 16" Long)

I1

1

LOW.PROFILE, HORIZONTAL OUTLETOptional on all 8" diameter

filter vessels

. .:-:-INLET & OUTLET

CONNECTION SIZE2 = 2" Connection3 = 3" Connection4 = 4" Connection6 = 6" Connection8 = 8" Conneclion

R/F ANSI Flanges,NPT, or Sanitary

Connections available

4

-; t,#i

{\,.,

#**=i ?,.u ,,*

.;

Interior Polished Finishes forbeverage, pharmaceutical, dairy,and other critical liquidprocess applications.

. T-316 Stainless Steel Upgrade, Including S/S Hardware

. Modified Connections: Flanged, Threaded, or Sanitary

. Low-Profile, Horizontal 0utlets

.Interior Polished Finishes, including 3A Sanitary

. HALAR Fluoropolymer Lining

. Epoxy Coating, interior, exterior & stand

. Mesh or Micron Lined Baskets, S/S

. Perforated Strainer Baskets, S/S

. Cartridge Chambers, S/S

*..'*

*ff

*Grffi;F','r-ffi

IX.r*--1

Heavy-duty perforated basketsconvert filter vessels into high-capacity, liquid strainers. MicronLined Baskets are avarlable forfiner filtering applications.

HALAB Fluoropolymer Lining

offers a broad range of chemical

resistance properties, a seamlessfiltering environment, and a safe

alternative to plastic housings.

. Thermal Jackets, Two-Piece, Stainless Steel

. Actuated Valves, Pneumatic or Electric

. Alternate 0utlet Locations

. Additional Porls

. Drain Valves, Vent Valves, Pressure Gauges

. Assofted O-Ring Materials

. PED - Pressure Equipment Directive, (€ marking

HALAR is a Registered Trademark of Solvay Solexis, Inc.

Filtration Systems vessels and filter media are designed to worktogether as a system, maximizing performance and results.

. Efficiency Ratings up to 99,98%...provides absolute rated performance

. Fully Welded Construction...elim inates solids bypass

. Zero-Bypass@ Bag Collar...assures an optimum compression seal

. I ntegrated Polymeric Su [email protected] superior nechanical strength

. Ratings from 0.2 to 600 Microns...absolute or nominal ratinos

LOWER WORKING HEIGHT MEANS EASIER FILTER BAG CHANGE.OUT

The Low-Profile, HorizontalOutlet is a one-piece investment casting exclusive IoIhe Filtration Systems product line.This option lowers the working height of the filter vessel by 4 on Individual Housings and 3'on Multi-HousingSystems, eliminating the need for a ladder or platform when changing filter bags. As a result, ergon0mic relatedinjuries and accidentalspills during change-out may be reduced.

This self-draining outlet is optionalon allstainless or carbon steel Individual Housings and Multi-Housing Systems.The LP" upgrade is available with flanged, threaded, or sanitary connections. , .

,-i :1. ii tiir, ..i.,r,1,1 t,l i,: .

ir; :it : i,' -i'r ii, l.iii Iiliii :l i ;

ii',iljl l.,il;ril.i;:iri l: t;

i: iii i i,.l' r| l

jii i i i i l: i_i ri"iili i il i ! li,i,l,;, l i l irn l"lil-[ r l.i li.1,

"C" C0nfiguration (lnlel over 0utlet)The outlet of the filter vessel is on the same plane as the inlet,or in the shape of the letter C'. in a orofile view.

"S" Gonfiguration (lnlel opposite 0utlel)The outlet of the filter vessel is 0pposite the inlet, or in theshape of the letter'S, in a profile view. In this type ofconfiguration, the filter becomes 'in-line'with existing piping.

Gustom 0utlet Confi gurationsThe direction of the 'LP outlet. relative to the inlet. can be oositioned to accommodatecustom piping arrangements.

Note: In all Low-Profile configurations, the standard drain placement is opposite theoutlet of the vessel. The location of the drain can be modified upon request. Pleaseconsult lactory f0r other custom requirements.

I

32"

-i*il-I ti:'i'Hi

ilr.ir:!iit {jrii:iii!ilil;,

"S" Gonfigulation

a-1t4"

II

l

"G" Configuration

l'lift'lti

:a:-illntel ,connecilon