Upload
oswin-ross
View
233
Download
4
Tags:
Embed Size (px)
Citation preview
© Boardworks Ltd 20051 of 22
Resistant MaterialsHealth and Safety
These icons indicate that teacher’s notes or useful web addresses are available in the Notes Page.
This icon indicates that the slide contains activities created in Flash. These activities are not editable.
For more detailed instructions, see the Getting Started presentation.
© Boardworks Ltd 20051 of 22
© Boardworks Ltd 20052 of 22
Learning objectives
© Boardworks Ltd 20052 of 22
Lea
rnin
g o
bje
ctiv
es To understand the need for health and safety laws and regulations in school and the workplace, to ensure that products are safe to make.
To understand the importance of products being safe to use.
© Boardworks Ltd 20053 of 22
the designer and the manufacturer of the product
the product user – the consumer of a product, the person who buys and uses it.
Health and safety affects all aspects of design and technology. Consider the health and safety of:
Remember: Health and safety is the concern of everybody.
Health and safety issues
© Boardworks Ltd 20054 of 22
A product must conform to safety standards.Products must carry a safety warning about possible hazards.Some products also need instructions for safe use.Products must be able to withstand misuse.
The designer needs to consider:
materials manufactureconstruction/assemblyfinishmaintenance.
Product designer
© Boardworks Ltd 20055 of 22
The people who are involved in making a product need to be protected from harm.
A workplace must conform to safety standards.
Safety warnings should be given about possible hazards.Some processes need instruction and training for safety.
workplace health and safetypersonal health and safetyhealth and safety equipment.
The manufacturer needs to consider:
Product manufacturer
© Boardworks Ltd 20056 of 22
inspect, making sure that workplaces comply with the lawguide, producing publications for employers and employeesupdate legislation.
The Health & Safety Executive (HSE) is responsible for making sure that organizations comply with health and safety regulations. It aims to safeguard the health and safety of employees and members of the public.
The Health and Safety Executive works to:
Health & Safety Executive
© Boardworks Ltd 20057 of 22
Health & Safety regulations
© Boardworks Ltd 20058 of 22
It is crucial that you are aware of all the health and safety risks around you. Under the 1974 Health and Safety at Work Act, employers and schools have certain responsibilities to ensure the safety of workers or pupils.
Risk assessments
Central to these responsibilities is the carrying out of a risk assessment. A risk assessment should:
identify hazards that pose a risk to employees or pupils
evaluate the risks
put control measures in place to minimize the risks.
© Boardworks Ltd 20059 of 22
Prior to starting any work or project you should assess any risks or hazards, and make a note of these in your workbook.
Risk assessments
It is important that you know and understand all the government guidelines and legislation surrounding health and safety.Familiarize yourself with all the symbols and signs relating to health and safety.
Risk/Hazard Action Sign
Tools could get knocked off worktable
Put up poster alerting people to the risk
Danger
© Boardworks Ltd 200510 of 22
Workshop signs
How many health and safety signs can you see in your workshop?
Do you know what the different coloured signs mean?
Each colour indicates a different type of safety warning.
Red Signs with a white background are prohibition signs. They are ‘DO NOT’ signs.
Green signs with white in them are safe signs. They direct us and lead us to ‘SAFETY’.
Yellow signs are warning signs. They alert us to ‘DANGER’.
Blue Signs with a white background are mandatory signs.They are ‘MUST DO’ signs.
© Boardworks Ltd 200511 of 22
Workshop signs
© Boardworks Ltd 200512 of 22
Safety signs
The same signs that are displayed in your workshop are used in industry. It is the responsibility of the employer to display signs warning of hazards, and to provide adequate safety equipment. It is the responsibility of the employees to wear this equipment and adhere to health and safety regulations.
© Boardworks Ltd 200513 of 22
Health and safety in the classroom
© Boardworks Ltd 200514 of 22
work safelypreparemake sure that you are trainedmake sure that you are supervisedsecure the work pieceuse appropriate toolsuse sharp toolsapply barrier creamdo not pick up metal swarfwear appropriate protective clothingkeep your work area clean and tidyensure the room is well ventilatedbe sensible!
You will be a lot safer if you take some simple precautions:
Always follow safety rules – if in
doubt, ASK!
Preventing accidents
© Boardworks Ltd 200515 of 22
No loose clothingNo jewelleryTuck ties inRoll up sleevesWear apronTie back long hairWear strong shoesWear safety equipment
What to wear
© Boardworks Ltd 200516 of 22
Machine hazards and precautions
© Boardworks Ltd 200517 of 22
Drilling machines, lathes and milling machines have to have machine guards. These are usually heavy, impact resistant plastic shields.
They prevent people putting their hands next to moving parts.They stop loose bits flying out and harming the operator.
Machine guards
© Boardworks Ltd 200518 of 22
Your eyes are valuable! Look after them!
If you are using a drilling machine, sander or lathe, make sure that you use eye protection.
Goggles will shield your eyes, while a visor will give full face protection.
When you are casting, use a full face mask or visor, leggings and other protective equipment.
Wear a face mask or respirator when using spray paints, some adhesives and when sanding, especially with MDF.
Face protection
© Boardworks Ltd 200519 of 22
If the accident involves a machine, the emergency stop button should be pressed to turn off the machine.Inform your teacher immediately.All accidents, however minor, must be reported and recorded. Any injuries, even minor cuts, must be treated.
Accident procedure
© Boardworks Ltd 200520 of 22
The people who use a product need to be protected from harm.
A product must conform to safety standards.Products must carry a safety warning about possible hazards.Some products require maintenance to remain safe over time.
raw materials and components used in constructionfinishes applied to the producthealth and safety when using the product.
The user needs to consider:
Product user
© Boardworks Ltd 200521 of 22
Safety symbols
© Boardworks Ltd 200522 of 22
Key points
© Boardworks Ltd 200522 of 22
Key
po
ints
When designing a product, you need to think about whether it will be safe to make and to use.Products must conform to safety standards.A workplace must conform to safety standards and signs warning of any hazards must be displayed.The Health and Safety Executive exists to ensure organizations comply with health and safety regulations.A risk assessment can identify any potential hazards.In the classroom, particular care must be taken when working with machines and sharp tools. Safety equipment must be used.