* Bluetooth Evaluation Kit

* MD-5XR : Bluetooth DSP Module - BC05 Multi-Media chip

* Supported Profiles. - HFP (Handsfree Profile) - A2DP(Advanced Audio Distribution Profile) Sink & Source - SPP (Serial Port Profile)

동판 적층형 Pattern ANT

* Install

1. Install1) Power : 5V 1A2) 25 Pin Parallel Cable for Download3) RS232 Pin Serial Cable for UART communication4) Press the blue switch to supply a power

2. Confirm if all 3 LEDs are lighted.

: If 2 LEDs are just lighted, you have to reconnect the serial Cable.

1. HFP(HandsFree Profile) Test

1)

2)

3)

4)

2. A2DP(Advanced Audio Distribution Profile) - A/V Sink Test

1)

3. SPP(Serial Port Profile) Test Program

1. Open SerialCom.exe

2. 1) Set Baud Rate

2) Parity has to be

set as a “None”

3) Press “Open”

3. Type your command

in the “Send” column

1)

2)