• Home

  • Documents

  • eccontracting.comeccontracting.com/wp-content/uploads/2016/03/Evo-Panel-System.pdf · ASTM E 1233...
2

eccontracting.comeccontracting.com/wp-content/uploads/2016/03/Evo-Panel-System.pdf · ASTM E 1233 (Modified) ASTM E 283 (Static) ... ASTM Bl 17-11 (Salt spray) ASTM D4541-09 (Adhesion

  • Upload
    lambao

  • View
    271

  • Download
    0

Embed Size (px)

Citation preview

Page 1: eccontracting.comeccontracting.com/wp-content/uploads/2016/03/Evo-Panel-System.pdf · ASTM E 1233 (Modified) ASTM E 283 (Static) ... ASTM Bl 17-11 (Salt spray) ASTM D4541-09 (Adhesion
Page 2: eccontracting.comeccontracting.com/wp-content/uploads/2016/03/Evo-Panel-System.pdf · ASTM E 1233 (Modified) ASTM E 283 (Static) ... ASTM Bl 17-11 (Salt spray) ASTM D4541-09 (Adhesion

Precidium Floor Coating System - DuPont · 3 Precidium™ meets or exceeds the following test standards. ateStm St DeSCrIPtIon reSuLt ASTM D4541 Pull-off strength - aluminum 1000

Precidium Floor Coating System - DuPont · 3 Precidium™ meets or exceeds the following test standards. ateStm St DeSCrIPtIon reSuLt ASTM D4541 Pull-off strength - aluminum 1000

Documents
DuPont™ Tyvek® Fluid Applied WB+™ - Global … · DuPont™ Tyvek® ™Fluid Applied WB+ DuPont ... ASTM D4541 Adhesion Strength - Exterior Gypsum (delaminates fiber glass top

DuPont™ Tyvek® Fluid Applied WB+™ - Global … · DuPont™ Tyvek® ™Fluid Applied WB+ DuPont ... ASTM D4541 Adhesion Strength - Exterior Gypsum (delaminates fiber glass top

Documents
1LSSRQ 3DLQW 6LQJDSRUH Dr. Daniel Wang, Principal Scientist · 2018. 5. 8. · ASTM D4752 SASO 2833 ASTM D4541 SASO ISO 15184 SASO ISO 2409 SASO ISO 1519 SASO ISO 3248 BS476 / ASTM

1LSSRQ 3DLQW 6LQJDSRUH Dr. Daniel Wang, Principal Scientist · 2018. 5. 8. · ASTM D4752 SASO 2833 ASTM D4541 SASO ISO 15184 SASO ISO 2409 SASO ISO 1519 SASO ISO 3248 BS476 / ASTM

Documents
ASTM D4541-95 - Stand. Test Method for Pull-Off Strength of

ASTM D4541-95 - Stand. Test Method for Pull-Off Strength of

Documents
Section 072703 - Air Barrier Association of America · Web viewRecord mode of failure and area where the material failed in accordance with ASTM D4541. When the air barrier material

Section 072703 - Air Barrier Association of America · Web viewRecord mode of failure and area where the material failed in accordance with ASTM D4541. When the air barrier material

Documents
Enclosure Commissioning a crash course in reality - …€¢ Water –ASTM E1105, D5957, AAMA 501.2 • Air –ASTM E 779, E1186, E783 • Adhesion –ASTM D4541, C794, C1193 • AAMA

Enclosure Commissioning a crash course in reality - …€¢ Water –ASTM E1105, D5957, AAMA 501.2 • Air –ASTM E 779, E1186, E783 • Adhesion –ASTM D4541, C794, C1193 • AAMA

Documents
판상형 Glass-flake를 이용한 내캐비테이션 도료koreascience.or.kr/article/JAKO201611962056130.pdf · Bond Strength (MPa) 12.3 9.3 ASTM D4541 Tensile Strength (N/mm 2)

판상형 Glass-flake를 이용한 내캐비테이션 도료koreascience.or.kr/article/JAKO201611962056130.pdf · Bond Strength (MPa) 12.3 9.3 ASTM D4541 Tensile Strength (N/mm 2)

Documents
HAFTZUGPRÜFUNG · 2019. 4. 30. · EN 1348, ISO 4624, BS 1881 Part 207, ASTM D4541, ASTM C1583, ASTM D7234-05, ASTM D7522, ZTV-SIB 90. Zudem enthalten die meisten Normen Anforderungen

HAFTZUGPRÜFUNG · 2019. 4. 30. · EN 1348, ISO 4624, BS 1881 Part 207, ASTM D4541, ASTM C1583, ASTM D7234-05, ASTM D7522, ZTV-SIB 90. Zudem enthalten die meisten Normen Anforderungen

Documents
TECHNICAL DATA SHEET · 2020. 12. 21. · (ASTM D4541) Wet surface: 120 Kg/cm2 (1706 psi) Dry surface: 170 Kg/cm2 (2417 psi) Abrasion Strength (ASTM D4060) Coefficient of Thermal

TECHNICAL DATA SHEET · 2020. 12. 21. · (ASTM D4541) Wet surface: 120 Kg/cm2 (1706 psi) Dry surface: 170 Kg/cm2 (2417 psi) Abrasion Strength (ASTM D4060) Coefficient of Thermal

Documents
CONTINUOUS EXPRESSION WALL PANEL - …altechpanel.com/Prods/Altech EVO Brochure_1.pdf · ASTM B117-11 (Salt Spray) ASTM D4541-09 (Adhesion Strength) ASTM D2794 (Impact Resistance)

CONTINUOUS EXPRESSION WALL PANEL - …altechpanel.com/Prods/Altech EVO Brochure_1.pdf · ASTM B117-11 (Salt Spray) ASTM D4541-09 (Adhesion Strength) ASTM D2794 (Impact Resistance)

Documents
FOR FUTURE PROJECTS THINK DIFFERENTLY · Abrasion ASTM D4060-14 1000 cycles CS10, load 1000g 116 mg Pull-Off strenght ASTM D4541 1740 Psi 12.24 MPa Adhesion ASTM D3359 5B Excellent

FOR FUTURE PROJECTS THINK DIFFERENTLY · Abrasion ASTM D4060-14 1000 cycles CS10, load 1000g 116 mg Pull-Off strenght ASTM D4541 1740 Psi 12.24 MPa Adhesion ASTM D3359 5B Excellent

Documents
Elcometer 510自动拉拔式附着力测试仪精确测量涂 层和基体 ...file.yizimg.com/605/2020217-114131165.pdf2020-2-17 · ASTM C1583, ASTM D4541, ASTM D7234-12, AS/NZS

Elcometer 510自动拉拔式附着力测试仪精确测量涂 层和基体 ...file.yizimg.com/605/2020217-114131165.pdf2020-2-17 · ASTM C1583, ASTM D4541, ASTM D7234-12, AS/NZS

Documents
Product Data - Albi Protective Coatings Clad TF... · 2019-07-31 · Compressive Strength ASTM D695 300 psi Cohesive/Adhesion Strength ASTM D4541 190 psi (cohesive failure) Abrasion

Product Data - Albi Protective Coatings Clad TF... · 2019-07-31 · Compressive Strength ASTM D695 300 psi Cohesive/Adhesion Strength ASTM D4541 190 psi (cohesive failure) Abrasion

Documents
ASTM Testing on Picote’s Epoxy Coating System · ASTM Testing on Picote’s Epoxy Coating System ... ASTM Testing on Picote’s Epoxy Coating System ... ASTM D4541 Test Conditions

ASTM Testing on Picote’s Epoxy Coating System · ASTM Testing on Picote’s Epoxy Coating System ... ASTM Testing on Picote’s Epoxy Coating System ... ASTM D4541 Test Conditions

Documents
ASTM D4541-2017 - BIUGED(D4541-09El) that may impact the use of this standard. (Approved August l, 2017.) TBD ASTM takes the va/idjty of any rights in any mentioned in this Standard

ASTM D4541-2017 - BIUGED(D4541-09El) that may impact the use of this standard. (Approved August l, 2017.) TBD ASTM takes the va/idjty of any rights in any mentioned in this Standard

Documents
basf-finestone-specification-finescreen-1000 · Web viewASTM D4541 Min. 110 kPa (15.9 psi) or substrate failure Pass - Tested over exterior gypsum sheathing, ASTM C1177 glass-mat

basf-finestone-specification-finescreen-1000 · Web viewASTM D4541 Min. 110 kPa (15.9 psi) or substrate failure Pass - Tested over exterior gypsum sheathing, ASTM C1177 glass-mat

Documents
Deckguard - The D.S. Brown Company...Adhesion to Concrete ASTM D7234 and D4541 > 200 psi** (primed) Taber Abrasion H 18/1000 cycles ASTM D4060 125 mg Crack-Bridging ASTM C1305 Pass

Deckguard - The D.S. Brown Company...Adhesion to Concrete ASTM D7234 and D4541 > 200 psi** (primed) Taber Abrasion H 18/1000 cycles ASTM D4060 125 mg Crack-Bridging ASTM C1305 Pass

Documents
Cerâmica 65 (2019) 303-318 ... · americana ASTM D4541 [3], a medida dessa resistência de aderência depende tanto de parâmetros do material quanto do equipamento utilizado para

Cerâmica 65 (2019) 303-318 ... · americana ASTM D4541 [3], a medida dessa resistência de aderência depende tanto de parâmetros do material quanto do equipamento utilizado para

Documents
American Concrete Institute - IAPMO · Web viewASTM D4541, Standard Test Method for Pull-off Strength of Coating Using Portable Adhesive-Testers, ASTM International. ASTM D7565, Standard

American Concrete Institute - IAPMO · Web viewASTM D4541, Standard Test Method for Pull-off Strength of Coating Using Portable Adhesive-Testers, ASTM International. ASTM D7565, Standard

Documents
09 97 00 Protective Coatings · Web viewASTM D4541: Standard Test Methods for Pull-Off Strength of Coatings On Metal Substrates Using Portable Adhesion Testers ASTM D4787: Standard

09 97 00 Protective Coatings · Web viewASTM D4541: Standard Test Methods for Pull-Off Strength of Coatings On Metal Substrates Using Portable Adhesion Testers ASTM D4787: Standard

Documents
AIR BARRIER FOR COMMERCIAL CONSTRUCTION · Adhesion Strength – Concrete (ASTM D4541) > 33 psi Adhesion Strength - Exterior Gypsum (ASTM D4541) (delaminates fiberglass topsheet)

AIR BARRIER FOR COMMERCIAL CONSTRUCTION · Adhesion Strength – Concrete (ASTM D4541) > 33 psi Adhesion Strength - Exterior Gypsum (ASTM D4541) (delaminates fiberglass topsheet)

Documents
aStm teSt DeSCrIPtIon reSuLt - DuPont · 3 Precidium™ meets or exceeds the following test standards. aStm teSt DeSCrIPtIon reSuLt ASTM D4541 Pull-off strength - aluminum 1000 psi

aStm teSt DeSCrIPtIon reSuLt - DuPont · 3 Precidium™ meets or exceeds the following test standards. aStm teSt DeSCrIPtIon reSuLt ASTM D4541 Pull-off strength - aluminum 1000 psi

Documents
Specification - D.S. Brown€¦ · ing (ASTM D4541). Minimum pull strength is 150 psi and failure in concrete substrate. F. Mask protected surfaces prior to spray applications

Specification - D.S. Brown€¦ · ing (ASTM D4541). Minimum pull strength is 150 psi and failure in concrete substrate. F. Mask protected surfaces prior to spray applications

Documents
Datasheet - D.S. Brown€¦ · Bond to Deckguard® ASTM D4541 500 psi+ Membrane Adhesion to Steel ASTM D4541 >300 psi Adhesion to Concrete ASTM D7234 and D4541 150 psi* *Or failure

Datasheet - D.S. Brown€¦ · Bond to Deckguard® ASTM D4541 500 psi+ Membrane Adhesion to Steel ASTM D4541 >300 psi Adhesion to Concrete ASTM D7234 and D4541 150 psi* *Or failure

Documents
ITEMS/MATERIALS/ STANDARD METHODS/ APPROVED … · 2016-11-24 · Determination of Pull-off ASTM D4541 – 2009e1 HYM / SL / THC COATING Strength using Portable ASTM D4541 – 2002

ITEMS/MATERIALS/ STANDARD METHODS/ APPROVED … · 2016-11-24 · Determination of Pull-off ASTM D4541 – 2009e1 HYM / SL / THC COATING Strength using Portable ASTM D4541 – 2002

Documents
€¦ · Web viewASTM D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers. ASTM E96 - Standard Test Methods for Water Vapor Transmission

€¦ · Web viewASTM D4541 - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers. ASTM E96 - Standard Test Methods for Water Vapor Transmission

Documents
INLEC · astm d4541, astm d7234, as/nzs 1580.408.5, bs 1881-207, din 1048-2, en 12636, en 13144, en 1348, en 1542, en 24624, iso 16276-1, iso 4624, nf t30-606, nf t30-062

INLEC · astm d4541, astm d7234, as/nzs 1580.408.5, bs 1881-207, din 1048-2, en 12636, en 13144, en 1348, en 1542, en 24624, iso 16276-1, iso 4624, nf t30-606, nf t30-062

Documents
Astm d4541-95 Pull-Off Strenght of Coatings

Astm d4541-95 Pull-Off Strenght of Coatings

Documents
ARCAT | Free Building Product CAD Details, BIM, Specs ... · Web viewASTM D4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser. ASTM D4541

ARCAT | Free Building Product CAD Details, BIM, Specs ... · Web viewASTM D4060 - Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser. ASTM D4541

Documents
VINYLTRIETHOXYSILANE ELECTRO-ASSISTED … · PosiTest AT-A as described in ASTM D4541-09 standard, with 20 mm dollies and a pull-off rate of 0,2 MPa/s

VINYLTRIETHOXYSILANE ELECTRO-ASSISTED … · PosiTest AT-A as described in ASTM D4541-09 standard, with 20 mm dollies and a pull-off rate of 0,2 MPa/s

Documents