Embed Size (px)
Citation preview
© 2007 NeoAccel, Inc.
NeoAccel SGX Installation Guide
Dear Customer:We are pleased to provide you with our training presentation for our SSL VPN-Plus installing and license configuration to help you with your deployment.
--The NeoAccel Support Team
© 2007 NeoAccel, Inc.
SGX Installation Guide page 3License Upgrade Guide page 13
Table of Contents
© 2007 NeoAccel, Inc.
NeoAccel SSL VPN-Plus™
SGX Installation Guide
4
Prerequisites to Get Started
• SSL VPN-Plus SGX Appliance(s)• SGX-800• SGX-1200• SGX-2400
• A Desktop or Laptop connected to same switch as the SGX appliance
• Management Console• Require JRE 1.4.2 or above on administrator’s PC
• SSL VPN-Plus Access Terminals• WAT: IE 5.0 & above, Firefox, Safari, NetScape• QAT: Windows 2000 & above• PHAT: Windows 2000 & Above, WinCE 5.0 & above Red
Hat 9.0, Red Hat EL 3, Knoppix, Debian, MAC OSX 10.3, 10.4, 10.5
5
• Connect the power cable. Connect network cable to eth0
Powering ON the device
Eth0: 192.168.10.230
Eth0: 192.168.10.230
Eth0: 192.168.10.230
SGX800
SGX1200
SGX2400
6
Connecting to the Gateway
• Power on the SGX appliance
• Connect a desktop to same switch the SGX is connected to OR use a cross over cable to directly connect to eth0 port on SGX
• Add one additional IP address to your desktop, say 192.168.10.200
• If ping is allowed in network, try ping to 192.168.10.230.
7
Access Management Console
Open the default browser on your machine and visit the following URL to open the SSL VPN-Plus Management Consolehttps://192.168.10.230/sslvpn-plus/nmcDefault credentials are admin/admin.
If your desktop does not have Java 1.4.2 or above, it will redirect you to download Java on your machine.
8
Networking Setup
• Go to INTERFACE screen and change the IP address as per your network
• If you want to connection the SSL VPN-Plus appliance in dual ARM mode• Select eth1 as “private network”• Say apply to apply changes• Uncheck “single ARM mode” for neoeth0• Say apply to apply changes
• For any other routing changes, please create routers from ROUTE screen
9
Licensing Setup
• NeoAccel runs an online license server to provide license to customers
• You need SSN (Software Serial Number) and password to get a license from license server
• To get a license of SSL VPN-Plus, open management console and go to LICENSE screen.
• Follow the instructions on screen to get/update license
• Please refer to attached “Licensing guide” for more details.
10
Deployment Options
Single ARM Mode in DMZ Parallel to Firewall
Internet RouterInternet
SSL VPN-Plus Gateway
Internal Network
Internal Workstation
Internal Server
External Firewall
eth1
Internet RouterInternet
SSL VPN-Plus Gateway
Internal Network
Internal Workstation
Internal Server
External Firewall
eth1
eth0
11
Deployment Options
Internal DMZ
Internet RouterInternet
SSL VPN-Plus Gateway
Internal Network
Internal Workstation
Internal Server
External Firewall
Firewall: DMZeth1
eth0Internet RouterInternet SSL VPN-Plus
Gateway
Internal Network
Internal Workstation
Internal Server
External Firewall
Firewall: DMZ
eth1
eth0
External DMZ
12
Access SSL VPN-Plus Portal
• Open URL: https://<WAN side IP address of gateway machine>/sslvpn-plus/• Example: https://vpn.corporate.net/sslvpn-plus/
© 2007 NeoAccel, Inc.
NeoAccel SSL VPN-Plus
License Upgrade Guide
14
• Licensing based upon• Number of days• Maximum concurrent users• SSL VPN-Plus features
•Two types of licenses• Registered: Variable parameters• Evaluation: 30 days, max 25 users
• Global license server: https://utils.sslvpn-plus.net/sslvpn-plus/users/ • License management through management console
SSL VPN-Plus Licensing
15
• You need the Software Serial Number (SSN) and password to access NeoAccel License Server• The SSN no. and password are specified on the one page main document you have got with the appliance.
• If you need any help with licensing write to [email protected] or call Technical Support at
+1.408.436.1000
• To get the license you need Internet connectivity from your desktop from where you are logged on to NeoAccel management Console.
Prerequisites
16
#1: Open Management Console
Login into Management console
17
Go to License management screen. If license has expired, a warning message will be shown
#2: Visit License Management Screen
18
Click on update button to update license
#3: Update License
Enter your SSN No. and click OK to generate license request.
19
#4: License Request Generated
Click on “Open License Server to go to NeoAccel License
Server
Click on “copy to Clipboard” to copy the license request string
displayed in the control
20
#5: Visit License Server
A new browser window is opened in the default browser.
If you have Firefox set as default browser, please copy
the URL in the address bar and use Internet Explorer to open
the license server page.
Enter your SSN and password to enter license server
21
#6: License Request Posting Page
You need to copy the license request from management
console here.
22
#7: Post License Request
Copy the license request from management console to license
server page.
Click on submit button to generate license key.
23
#8: License Key is Generated
This is your license key which you need to copy to
management console screen.
24
#9: Apply License Key
Copy the license key from license server page to management console.
Click Ok button to apply the license
25
#10: License is Updated
Updated license information is displayed here.
26
CORPORATE HEADQUARTERS NeoAccel, Inc.4340 Stevens Creek Blvd, Suite 275San Jose, CA 95129 USA
TEL: +1 408 274 8000FAX: +1 408 274 8044
EMAIL [email protected]
Contact NeoAccel
TECHNICAL SUPPORT email: [email protected] phone: 408.436.1000
LICENSE SUPPORT email: [email protected] phone: 408.436.1000
