TF110A Crease Recovery Tester - iron separator

Comfortable TF110-TF119

TF110A Crease Recovery Tester

Keywords Crease tester

Description Crease Recovery Tester (crease tester), to determining recovery properties of fabrics by creasing

in a loading device... fabric crease tester complies with ISO 2313, AATCC 66, etc.

TF110B Crease Recovery Tester Digital

Keywords

TF110A Crease Recovery Tester

Application

Crease Recovery Tester & Loading Device, to determining recovery

properties of fabrics by creasing in a loading device for a predetermined

time using a weight suitable for the test method specified （BS、ISO、

AATCC）, After transferring the specimen to the clamp of the tester, the

specimen is allowed to recover and the angle of recovery recorded.

Crease Recovery Tester (crease tester) is a totally manual operated

device.

Standards ISO 2313, AATCC 66, BS EN 22313, M&S P22

Weight 3 Kg

Dimensions 170x170x360 mm(LxWxH)

TF110B/C Crease Recovery Tester Digital

Application

Digital Fabric Crease-recovery Tester is used for testing fabric

recoverability after being creased, and indicated with crease

vertical-recovery method.

Specification

Working pattern: controlled by computer, test data is digital

displayed

Measuring mode: fast elastic：15±1s, slow elastic：5min±5s

Pressure loading: 10+/-0.05n

Loading time: 5min+/-5s

Loading area: 18x15mm

Accuracy of measuring angle: 40～165°+/-1°

Work Stations: 10

Models

TF110B Crease Recovery Tester Digital

TF110C Crease Recovery Tester Computerized

Standards AATCC 66, ISO 2313, GB/T 3819

Power 220 V 50/60 Hz

Weight 85 Kg


Description Digital Fabric Crease recovery Tester is used for testing fabric recoverability after being creased.

fabric crease recovery tester complies with ISO 2313, AATCC 66, etc.

TF112 AATCC Wrinkle Recovery Tester

Keywords

Description AATCC Wrinkle Recovery Tester is used for determining a fabric's ability to recover after

wrinkling, Wrinkle recovery tester complies with AATCC 128, ISO 9867, ENKA 3061, etc.

TF112 AATCC Wrinkle Recovery Tester

Application

AATCC Wrinkle Recovery Tester is used for determining a fabric's ability

to recover after wrinkling under a pre-determined load for a set period of

time.

Provided with a set of 5" x 3" dimensional plastic replicas to grade

fabrics 1-5.

This Wrinkle Recovery Tester is a totally manual operated device that

easy to test.

Optional Accessories

AATCC Wrinkle Recovery Tester Plastic Replicas (Set of 5)

Standards AATCC 128, ISO 9867, ENKA 3061

Weight 5 Kg


TF113A Fabric Stiffness Tester

Application

Fabric Stiffness Tester, To determining the bending height,

flexural rigidity and bending modulus of fabric by simple

procedures and calculation. Fabric Stiffness tester is a totally

manual operated device.

Specification

Tilt angle: 41. 5 º

Standards ISO 9073-7, ASTM D1388, BS 3356, BS EN 22313,

DIN 53362, ERT 50-2

Weight 4 Kg


TF113B Auto Fabric Stiffness Tester

Application

Auto Fabric Stiffness Tester, To determining the bending height,

flexural rigidity and bending modulus of fabric by simple

procedures and calculation.

TF113 Fabric stiffness tester

Keywords

Description Fabric Stiffness Tester, to determining the bending height, flexural rigidity and bending modulus

of fabric. Fabric stiffness tester complies with ASTM D1388, BS 3356, etc.

TF114 Stiffness Tester Pneumatic

Keywords

Description Fabric Stiffness Tester Pneumatic, used for testing the stiffness of fabric by the bending cycle

test method of ASTM. Fabric Stiffness Tester complies with ASTM D4032.

Sample is moving and stopped when bended at set angle, the

sample is moved by a motor and the bending angle is detected by the

laser scanning device, the result is displayed on LED, so that

ensures accurate and repeatable test results.

Specification

Tilt angle: 41. 5 º, 43°, 45°

Resolution of bending length: 0.1mm

Standards ISO 9073-7, ASTM D1388, BS 3356, BS EN 22313,

DIN 53362, ERT 50-2

Weight 18 Kg

Dimensions 450 x 250 x 400 mm(LxWxH)

TF114 Stiffness Tester Pneumatic

Application

Fabric Stiffness Tester Pneumatic, used for testing the stiffness of fabric

by the bending cycle test method of ASTM.

Test Procedure

A plunger of 25.4mm (1 in) diameter pushes the fabric through a 38mm

(1.5 in) diameter orifice for a distance of 57mm (2.25 in) in 1.7 seconds

and the maximum force is recorded.

Specification

Provided with pneumatic cylinder

Digital force gauge: 50 kgf, 500N or 100lb (switchable) with

peak-hold facility.

Lab compressed air is required.

Standards ASTM D 4032

Air Source 0.4-0.7 Mpa

Weight 18 Kg


TF115A/B Softness Tester

TF115A/B Softness Tester

Keywords

Description Softness Tester, to determine the softness of leather and coated fabrics and other soft materials.

Leather softness tester complies with IULTCL IUP/36(equivalent EN ISO 17235)

TF115A/B Flexing Resistance Tester

Application

Softness Tester, to determine the softness of leather and coated fabrics

and other soft materials. Softness tester does not need samples to be

cut from leather prior to testing. This enables a quality system to be

set-up between supplier and customer whenever leather softness is a

priority. Analogue and digital softness tester is available

Test Procedure

Deflection of the material shilst clamped above an aperture of a known

diameter is measured when subjected to a specific load applied by a pin

of a smaller diameter. The deflection is read on the analogue or digital

gauges.

Models

TF115A Softness Tester Analogue

TF115B Softness Tester Digital

Standards IULTCL IUP/36(equivalent EN ISO 17235)

Weight 6 Kg


TF116 Flexing Resistance Tester

Application

Flexing Resistance Tester is designed for flexing resistance test to bend

ing or other types of failure at flexing creases. The machine is applicabl

e to all flexible materials and in particular leathers, artificial leather belo

w thickness of 3.0mm, and other coated fabrics, sheet materials, etc.

Test Procedure

One of the specimen surface as the inner side, the other side as the

outer surface, reciprocating bend it at an angle of 22.5 Deg., until it is

injured or meeting a given number times. Use a magnifying glass to

evaluate its damage degree and record it.

Specification

Work stations: 12

Counter: 1-999,999 times

Standards ISO 5402, SATRA TM55, DIN 53351, BS-3144, BS

EN 13512, JIS-K 6545, CNS-7705

Power 220 V 50/60 Hz 4 A

Weight 70 Kg


Keywords

Description Flexing Resistance Tester is designed for flexing resistance test to bending of leather and fabric.

Flexing Resistance Tester complies with ASTM-D2813, BS-3144, JIS-K6545, etc.

Elm

TF117 Schildknecht Flexing Tester

Application

Schildknecht Flexing Tester is designed to determine the resistance of

coated fabrics to damage by flexing due to oscillation at 500 times per

minute. Accommodates 10 specimens, provided with a resettable

electronic counter to record number of cycles.

Specification

Counter: 1-999999 times

Standards ISO 7854 , BS 3424


Weight 25 Kg


TF118 Fabric Drape Tester

Application

Fabric Drape Tester. To measure and calculate the coefficient of drape of

fabrics using image processing technology. It can be used to test the

drape property of all kinds of fabrics

Equipped with CCD imaging system, dynamic and static images

processing, offers a variety of charts and data statistication, analysis,

storage and output. Specimens in all colors can be tested without

changing background color,.

Specifications

Working pattern: computer controlled, CCD imaging, full-automatic

processing of images and computer data.

Imaging sensor: CCD

Overhanging coefficient: 0 ~100%±2

Vivacity ratio: 0 ~ 100%±2

Aesthetic coefficient: 0 ~ 100%±2

Stiffness coefficient: 0 ~ 100%±2

Waviness of curved surface: ±1

Rotation speed: 3 ~ 80±1 rpm

Standards BS EN 9073, BS 5058, ERT 90-1, AFNOR G07-109,

UNI 8279, FZ/T01045

Power 220 V 50 Hz 120 W

Weight 60 Kg

Dimensions 600 x 460 x 1500mm (LxWxH)

http://www.sdlatlas.com/results/?s=3&n=5058


Fabric Drape Tester, to measure and calculate the coefficient of drape by tracing a shadow of the draped fabric on

paper. Includes 50 each, complies with BS EN 9073, BS 5058, etc.

Physical 10th

TF115A/B Fabric Scale

Keywords Fabric GSM balance

Description Fabric Scale (Fabric Weight Balance). To determine the fabric weight nicely, accurate

measurement fabrics gram portable electronic scales. complies with ISO3801, ASTM

D3776/2646, etc.

TF118 Fabric Drape Tester

Application

Fabric Drape Tester. To measure and calculate the coefficient of drape

by tracing a shadow of the draped fabric on paper. Includes 50 each

Principle

The circular specimen of the fabric being tested is held horizontally

between smaller concentric discs, and the exterior ring of fabric is

allowed to drape into folds around the lower supporting disc. The

shadow of the draped specimen is cast from below onto a ring of paper

of known mass and of the same size as the unsupported part of the test

specimen. The outline of the shadow is traced onto the ring of paper and

the paper is then cut along the trace of the shadow. The drape coefficient

is the mass of that part of the paper ring representing the shadow,

expressed as a percentage of the mass of the whole paper ring.

Included Accessories

50 Paper Rings for each size of diameter 24CM / 30 CM / 36 CM

Standards BS EN 9073, BS 5058, ERT 90-1, AFNOR G07-109,

UNI 8279

Weight 23 Kg


TF120 Fabric Scale

Application

Fabric Scale. To nicely determine the weight of fabric, paper, cardboard

and film, etc. This electronic scales, provided with LCD display, stainless

steel plate, touching switches, wind-proof caps.

Specifications

Unit conversion: Grams, grams/m2, ounce, and ounce/square yards

Measuring range：300g(selectable)

Precision：0.01g

Includes 1 Calibration Weight

Standards ISO3801, ASTM D3776/2646, BS 3424/2471, BS EN

12127, M&S P65/65A, NEXT 20

Power 220 /110 V 50/60 Hz

Weight 3 Kg





TF121A/B Fabric Thickness Tester(Gauge)

Keywords

Description Fabric Thickness Tester (Gauge), an accurate soft material thickness tester with counter

balance designed to... Fabric Thickness Tester (Gauge) complies with ASTM D1777.

TF121A/B Fabric Thickness Tester(Gauge)

Application

Fabric Thickness Tester (Gauge), an accurate soft material thickness

tester with counter balance designed to exert minimal load on sample

through 1.129 in (28.7mm) diameter presser foot. Digital display of

thickness up to 10mm with a resolution of 0.01mm Supplied with a

loading weight to provide a load of 0.6psi (4.14KPA). Other

configurations available on application required.

Specifications

Base diameter: 150mm

Press foot diameter: 28.7mm(1.13in)

Thickness range: 0.01-10mm

Precisions: 0.01mm

Models

TF121A Fabric Thickness Gauge-Analogue

TF121B Fabric Thickness Gauge-Digital

Standards ASTM D1777

Weight 2 Kg


TF121C Digital Thickness Gauge

Application

Digital Thickness Gauge, to determine the thickness of various woven

and knitted fabrics under a certain pressure. Automatic lifting up and

down avoiding manual operation error by presetting pressing time for

10s or 30s, available with two unit mode in mm and inch.

Specifications

Digital display

Range of thickness: 0.1~10mm

Measuring accuracy: 0.01mm

Area of pressing foot: 50mm2, 100mm

2, 500mm

2, 1000mm

2,

2000mm2

Load weight: 50cN(2pcs), 100cN(2pcs), 200cN(1pcs)

Pressing duration: 10s, 30s

Standards ISO5084, 9073.2, FZ/T 63005

Power 220 V 50 Hz 40 W

Weight 25 Kg

Dimensions 410 x 160 x 300 mm (LxWxH)

13

TF122 Fabric Density Meter

Application

Fabric Density Meter, to determine the thread density of woven fabrics

and wire meshes as well as the loop density of knitted fabrics in the

range of 8 through 300/cm (20 through 762/in). Suitable for use in the

laboratory as well as in the production area.

For testing the instrument is placed onto the test specimen. After

selecting the appropriate measuring range and pressing a button the test

result is digitally displayed within less than one second.

Specifications

Measuring range: 8-300/cm (20-762/in).

Measuring accuracy: better than ± 1 %

Measuring unit: 1/mm and 1/in

Measuring length: 29mm(1.1in)

Measuring time: less than 1 second.

Handy pocket-size instrument.

Data port for example for the Strip Printer L 5130 MINIPRINT or a

PC with the program L 5110 LABODATA III.

Calibratable.

Worldwide unique instrument.

Power 1.5AA batteries x 2 (for 2000 times test)

Weight 1 Kg


TF123 Moisture analyzer

Application

Moisture analyzer combines state-of-the-art heating with highly accurate

weighing technology to deliver a faster, more precise method of moisture

analysis.

Features

Fast halogen heating (1ºC increments to 200ºC in 30secs), Repeatability

0.015% (10g sample), choice of units, statistics, manual, timed and auto

stop modes (mg/s); 4 temperature profiles (standard, fast, ramp, step);

audible feedback; selectable print intervals; storage of up to 50 drying

programs with statistics, text prompts and scrolling menus to guide user

through set-up and analysis

Specifications

Display: Graphical backlit LCD can show temperature/time,

setup, ID, initial weight, drying curve (real time), %

moisture

Operation: Mains operation

Communication: RS232 interface, GLP with time & date

Construction: Durable ABS with stainless steel pan & in-use

cover

Capacity: 45g

Readability: 1mg/0.01Pct

Platform: 90mm

Power 220 /110 V 50/60 Hz 3 A

Weight 4 Kg


TF123A Hand-held Textile Moisture Meter

Application

Hand-held Textile Moisture Meter are widely used in leather materials,

fabrics, garments, yarn, axis, cheese, textiles and other industry that

needs rapid determination of moisture (moisture regain).

Features

Textile moisture meter using high-frequency theory, LCD digital

display, the probe and the host into one.

Position the probe against the surface to be measured, determine

moisture quickly within one second.

Measure accurately and without any damaging on the surface to

be measured.

Small size, light weight that can be portable for on-site rapid

testing

Specifications

Moisture range: 0 ~ 40%

Work environment: -5 ℃ ~ +60 ℃

Accuracy: ± 0.5%

Response time: 1 second

Display: LCD digital display

High-frequency scanning depth: 50mm

Stall converter :0-10

Power 9V battery(6F22)

Weight 1 Kg


TF124 Course Length Tester

Application

Course Length Tester. To determine the accurate length of a complete

course of knitted fabric. When the yarn is attached to the clamp and

wound round the pulleys, the length indicated on the ruler by the

weighted clamp is added to that indicated on the appropriate location in

use to give the total length of yarn

Course length range 50-900cm(2-36 inches).

Standards BS 5441

Function TF130-139 30

Weight 7 Kg


TF125 Crimp Tester

Application

Crimp Tester, to calculate the crimp in yarn affected by knitting or

weaving by taking apart the yarn from a piece of given-length fabric,

unbending it under given force and measuring its length, to determine

actual yarn usage.

Features

Auto alarms after drawing to a predetermined tension, and stops

Automatic or manual testing mode

Automatic operation after setting up force value

Displays elongation and force value at the same time

Equipped with fine-tuning knob to ensure accuracy

Specifications

Specimen length: 1100mm

Load range: 0. 01 - 200 cN

Length sensor accuracy: 1mm

Display: LED

Stroke (excluding grips): 10 - 1000mm

Standards ISO 7211, ASTM D3883, FZ/T 01091, FZ/T 01093,

FZ/T 70008, IWSTM 169, BS 2863/2865/2866

Power 220 /110 V 50/60 Hz 200W

Weight 15 Kg


TF130 Flat-plate Thermal Conductivity Tester

Application

Flat-plate Thermal Conductivity Tester, to determine the thermal

conductivity of various fabrics, quilting products, and other heat

insulation materials.

Microcomputer controlled, data processors and quality temperature

sensors are used, ensures high test speed and precise test result. All

performances of the sample (Include Insulation rate, heat transfer

coefficient) can be directly calculated. Test data and result is displayed

on the large LCD display, and can be stored or printed out.

Specifications

Temperature Range : 20-50℃

Temperature Accuracy: ±0.5℃

Resolution of Temperature: 0.1℃

Range of Pre-heating Time: 0 ~ 99.9min

Cycles: 1-9 times

31

TF131 UV Penetration & Protection Test System

Keywords

Description UV Penetration & Protection Test System. Fabric Samples are measured in a double beam

spectrophotometer with an integrated sphere. UV system complies with AATCC 183, BS 7914,

etc.

Sample Size: 300 x 300mm

Testing Board Size: 250 x 250mm

Standards ASTM D1518, JIS L1018, GB11048

Power 220 V 50 Hz 220 W

Weight 65 Kg

Dimensions 520x630x700mm (L x W x H)

TF131 UV Penetration & Protection Test System

Application

UV Penetration & Protection Test System. Fabric Samples are measured

in a double beam spectrophotometer with an integrated sphere. The

sample is scanned over the UVA and UVB regions of the spectrum and

transmitted radiation is efficiently collected by the detector within the

integrating sphere. The software calculates UV penetration factors and

sun protection factors from the scan data. It runs on a PC under

Microsoft Windows and controls the spectrophotometer, automates the

measurement process and generates a printed report. PC and printer

not included.

Specifications

Measuring range:

Through rate: 0-100% ± 0.01% UPF: 0-100

Wavelength range: 280 ~ 400nm ± 0.5 nm

Wavelength repeatability: 0.25 nm

Data interval: 1-5nm (adjustable)

Slit width: </= 5nm

Optic system: 0 / d

Light diameter of sample: 10mm

Standards AATCC 183, BS 7914, AS/NZS 4399, PREN13758,

GB/T18830

Power 220 /110 V 50/60 Hz 100 W

Weight 20 Kg


TF132 Fabric Electromagnetic Shielding Tester

TF132 Fabric Electromagnetic Shielding Tester

Keywords

Description Fabric Electromagnetic Shielding Tester, to determine the plane wave shielding effectiveness of

fabrics, etc. Electromagnetic Shielding Tester complies with ASTMD4935, SJ2054, etc.

Application

Fabric Electromagnetic Shielding Tester, to determine the plane wave

shielding effectiveness of materials, such as woven and non-woven

fabric, metal sheet, coating, metal net, conductive film, conductive glass,

conductive medium sheet, plate-type electromagnetic shielding

materials etc.

Electromagnetic shielding tester uses coaxial flange test method with

double-shield structure, analysis system can determine the fabric

electromagnetic shielding accurately by the computerized transmitter

and receiver, and automatic data acquisition.

Specifications

Range of Launch frequency: 20MHz ~ 1.3 GHz

Instability of Launch frequency: <1000Hz

Jumping frequency interval of Launch: min 1MHz

Launch output power: > 13dBm.

Receiving power dynamic range: +5dBm to -55dBm,

Receiver accuracy: ± 1dB

Receiver power resolution: 0.01 dB,

Receiver frequency range: 10MHz ~ 3GHz test

Performances of double-shield: > 20Db

Sample thickness: </= 5mm

Standards ASTMD4935, SJ2054, GB/T23326

Power 220 /110 V 50/60 Hz 100 W

Weight 60 Kg


TF134 Downproof Tester

Application

Downproof Tester, To determine the downproof capability of fabric used

for downgarmet, quilt etc, which are full with down, feather and fibers.

Take an agreed size specimen from the fabric to be tested to sew a

pocket at specified size , fill with a certain weight of down, feathers or a

mixture of both, then sew the fabric up to be a testing bag. Clamp the

both sides of the bag in the holder. After test to determine the downproof

ability of the fabric by calculating the number of down and feathers

through the fabric

Specifications

Fixture space: 44 ± 1 mm

Eccentricity: 25 ± 0.5mm

Speed: 135 r / min

Sample size: 140 x 420 mm

$980

TF134 Downproof Tester

Keywords

Description Downproof Tester, To determine the downproof capability of fabric used for downgarmet, quilt

full with down, feather, fibers. Downproof Tester complies with BS 12132, EN 12132-1, STS 47.

TF140A Elmendorf Tearing Tester

Keywords Tearing strength tester,

Description Elmendorf Tearing Tester (Elmendorf tester), to determine the tearing strength of fabric, paper,

etc. Elmendorf Tearing Tester(Elmendorf tester) complies with ASTM D1424, ISO 13937, etc.

Cushion size: 120 x 170 mm

Test times: 2700, settable

Counter: 0 to 999,900 times

Standards BS 12132, EN 12132-1, STS 47

Power 220 /110 V 50/60 Hz 2 A

Weight 25 Kg


TF140A Elmendorf Tearing Tester

Application

Elmendorf Tearing Tester. To determine the tearing strength of fabric,

paper, etc. Range from 8000 to 64000 Millinewtons with suitable

pendulums, including 3 pendulums.

Elmendorf Tearing Tester is specially designed for the tearing strength of

fabric, paper, leather, film, non-woven materials with well-regulated

tearing direction, and other thin materials. Elmendorf tester does not

apply to sparse fabric or stretch materials which tearing direction might

be shift when testing.

Test Procedure

Elmendorf tearing tester using stable mechanical clamps, specimen is

fixed in the clamp and use the equipped blade to cut a crack, specimen

is torn along the crack direction by releasing the moveable clamp,

convert the work value of tearing in a certain length to ballistic tearing

strength.


Elmendorf tester(pendulum testing machine) offers with 3 pendulums:

1600cN/g (3.5lb), 3200cN/g (7.0lb), 6400cN/g (14.0lb)

Cutting Blades: 2 Pcs

Standards ASTM D1424/5734, ISO 13937-1/1974/9290, BS

3424/4253/4468, DIN 53862, NEXT 17, M&S P29

Weight 30 Kg




TF140B Shrinkage Board

Application

Shrinkage Board, A computer controlled falling-pendulum instrument, to

determine the ballistic tearing strength of textiles, plastics, paper or

board.

It enables rapid determination of the dynamic resistance of materials

designed to be subjected to strong shearing loads (e.g. fabrics) or liable

to be damaged by sharp or heavy objects (e.g. paper bags).

Subsequently, the test was naturally adopted for all materials in the form

of sheet or films, cardboards, cloth, knitted fabrics, plastic films,

aluminum foil, non-woven fabrics, complex flexible packaging etc. But

does not apply to sparse fabric or stretch materials which tearing

direction might be shift in test.

Procedure

The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in

length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn

after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The

difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is

a measure of the energy absorbed in tearing the sample. This angular movement is measured with a digital encoder and

is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in

the apparatus

Features

Works in accordance with all known test standards.

RS-232 data output, equipped Tearing Test software

Auto specimen notching

Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping

phenomena, thus ensuring perfect reproducibility of the experimental conditions.

Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and

maintenance problems.

Specifications

Capacity: 0-6400 grams

Pendulum Range: 1600, 3200, 6400

Accuracy: 0.2% of pendulum range

Unit: MN, CN, G KG, OZ, LB


Complete with pendulums and calibration weights: 1600cN/g (3.5lb), 3200cN/g (7.0lb), 6400cN/g (14.0lb)

Software: System of TF140B Digital Elmendorf Tear Tester

Cutting Blades: 2 Pcs

Specimen cutting template: 1 Pc

Standards ASTM D1424/5734, ISO 1974/9290, BS ISO 13937, BS 3424/4253/4468, DIN

53862/53128, NEXT 17, M&S P29, INDA IST 100.1, AFNOR G 07-149

Power/Compressed Air 220 V / 110V 50 / 60 Hz 0.5-0.7 Mpa

Weight 75 Kg


TF140C Computerized Elmendorf Tear Tester

Application

Computerized Elmendorf Tear Tester (patented product), A computer

controlled falling-pendulum instrument, to determine the ballistic tearing

strength of textiles, plastics, paper or board.

It enables rapid determination of the dynamic resistance of materials

designed to be subjected to strong shearing loads (e.g. fabrics) or liable

to be damaged by sharp or heavy objects (e.g. paper bags).

Subsequently, the test was naturally adopted for all materials in the form

of sheet or films, cardboards, cloth, knitted fabrics, plastic films,

aluminum foil, non-woven fabrics, complex flexible packaging etc. But

does not apply to sparse fabric or stretch materials which tearing

direction might be shift in test.

Compressed air of 0.4~ 0.7Mpa is required.

Procedure

The test is carried out on a specimen composed of one or more sheets of standard dimensions 100 x 63 mm, a crack in

length of 20 mm of specimen is notched automatically, a usually with a distance of 43mm (1.7 in) remaining to be torn

after initiating the tear. The energy of a pendulum of suitable weight is used to completely tear the specimen. The

difference in the angle from the vertical of the center of gravity of the pendulum between the downswing and upswing is

a measure of the energy absorbed in tearing the sample. This angular movement is measured with a digital encoder and

is immediately converted to the mean tearing force for a single sheet by the microprocessor and software incorporated in

the apparatus

Features

Works in accordance with all known test standards.

The model is the only one that covers the most completed test range from 0 to 12800cN.

RS-232 data output, equipped with Lenovo computer and Tearing Test software, and Panasonic printer.

Machine can be controlled by the large graphic touch panel without computer and software.

Automatic specimen clamping and notching

Repeatable, pneumatic specimen gripping system guarantees sufficient clamping pressure to avoid all slipping

phenomena, thus ensuring perfect reproducibility of the experimental conditions.

Automatic compensation for friction and leveling errors, no slave pointer, therefore no friction, alignment and

maintenance problems.

Specifications

Capacity: 0-12800 grams (0 ~ 128N)

Pendulum Range(cN): 0~ 1600, 0 ~ 3200, 0 ~ 6400, 0 ~ 12800

Accuracy: 0.2% of pendulum range

Unit: GF, MN, CN, CP, LB


Professional Elmendorf Tearing Test software

Complete with work pendulums and calibration weights: 1600cN/g (3.5lb), 3200cN/g (7.0lb), 6400cN/g (14.0lb),

12800cN/g(28.0lb)

2 pcs of Cutting blades

1 pcs of Specimen cutting template

Standards

ASTM D1424/5734, ISO 1974/9290, BS ISO 13937, BS 3424/4253/4468, DIN

53862/53128, NEXT 17, M&S P29, INDA IST 100.1, AFNOR G 07-149, GB/T 3917.1,

FZ/T 60006, FZ/T 75001

TF140C Digital Elmendorf Tearing Tester

Keywords Tearing strength tester,

Description Digital Elmendorf Tear Tester, A computer controlled falling-pendulum instrument, to determine

the ballistic tearing strength of textiles, plastics, paper or board. Elmendorf Tearing

Tester(Elmendorf tester) complies with ASTM D1424, ISO 13937, etc.

Power/Compressed Air 220 V / 110V 50 / 60 Hz 0.5-0.7 Mpa

Weight 75 Kg


TF141 Mullen Bursting Strength Tester

Application

To determine the bursting strength of plastics, paper, textiles, and. no

woven fabric. The commonly used models C can achieve maximum

measurable 200psi. Unique device enables transmissions pressure

stable. Electric-driven pumps can handle a fast and accurate samples

holding.

Specifications

Measuring Range: 0-87psi

Measuring Range: 0-233psi

Collet diameter: 31mm

Pressure Speed: 95+/-10ml/min

Standards ASTM D3786, AS2001.2.4, BS4768,

GB7742, ISO2960.

Power 220 /110 V 50/60 Hz 3 A

Weight 42 Kg


TF141 Digital Bursting Tester

Application

Digital Bursting Tester, To determine the bursting strength of fabric,

woven or knitted fabrics, non-woven, paper and board by the application

of hydraulic load under a rubber diaphragm of a specific area.

Bursting tester provided with a digital readout of pressure with peak hold

facility and upper limited pressure setting and display bursting force with

auto calculation, renewable rubber diaphragms, automatic clamping

device.

Specifications / Features

Large LCD displays test force and other information.

Strength (max.) and Resolution: 0~7MPa (7000kPa / 1015psi),

0.002 MPa.

Specimen holder dimensions: 30.5mm dia. (7.3cm²).

Rubber diaphragms dimensions: 80.0mm dia.

Textile rubber diaphragms application range: 0~2MPa ( 2000kPa /

290psi)

Auto-clamping offers firm and reliable force

Air pressure: Max. 2.5bar

Standards

ASTM3786-06, ISO 2960, ISO2758/13938, BS

3424/3137, BS 4768, AS2001.2.4, GB/T 7742,

IWSTM 29, EDA NA 80.4-02/80.3-99, NEXT 22 2206

Power 220 V 50/60 Hz 250 W

Weight 38 Kg


TF142A/B Digital Bursting Strength Tester

Application

Bursting strength tester, to determine the bursting strength of paper and

corrugated board, woven or knitted fabrics, and non wovens by

application of a hydraulic load under a rubber diaphragm of a specific

area.

Provided with a digital readout of pressure with peak hold facility,

renewable rubber diaphragms. Manual clamping device with clear

acrylic bell. Equipped with LCD display. Touch screen with test curve

display is available

Specifications

Units: Kpa - Kg/cm2 - Bar & PS

Measure range from:

Paper: from 0 to 1,500 kPa

Board: from 200 to 5,000 kPa

Acrylic protection screen (tests area)

Pressure speed: 170+/-15ml/min for board, 95+/-5ml/min for paper

Standards

ASTM D477, ISO 2758/2759, SCAN P25/P24,

TAPPI T403, PAPTAC D19P/D8, BS3137,

DIN 53141, AP/AS 1301/403

Power 220 /110 V 50/60 Hz 3 A

Weight 60 Kg


TF142A/B Computerized Bursting Tester

Application

Computerized Bursting Tester, To determine the bursting strength of

fabric, woven or knitted fabrics, non-woven, paper and board by the

application of hydraulic load under a rubber diaphragm of a specific

area.

Bursting tester provided with a digital readout of pressure with peak hold

facility, renewable rubber diaphragms. Manual clamping device with

clear acrylic bell.

Provided with Windows based Bursting Strength Testing software

(Computer and printer are not included), it gives accurate control of the

unit, user friendly interface and presentation of test reports together with

data storage and retrieval.

Interchangeable test bells and clamping ring sets 30.5mm(standard),

30mm, 31mm, 35.7mm, 79.8mm or 113mm diameter (Please specify).


Capacity and Resolution: 2000kPa (290psi), 10000 kPa (1450psi),

2Kpa.

Standard clamping ring set: 50cm2（Φ79.8mm）, 7.3cm2

（Φ30.5mm）, the other size are available on request.

Testing range:0-2 Mpa / 0-10Mpa

The min. Division value:0.002Mpa

Elastic mold-plate size:≤2mm

The max. extended strength:70±0.02mm

The max. extended time: 99.9±0.1S

Pressuring speed:100 -500cm2/min

Advanced model for interface to computer and printer.

Multilingual, user friendly Menu-driven software.

Manual-clamping offers firm and reliable force.

Aiding sampling system

Models

TF142A Computerized Bursting Tester – 2000 kPa (290psi)

TF142B Computerized Bursting Tester – 10000 kPa (1450psi)

Standards

ASTM3786-06, ISO 2960, ISO2758/13938-1, BS

3424/3137, BS 4768, AS2001.2.4, GB/T 7742,

IWSTM 29, EDA NA 80.4-02/80.3-99, NEXT 22 2206,

FZ/T60019, ISO2960

Power 220 V 50Hz 800 W

Weight 300 Kg


TF142C Fabric Pneumatic Bursting Tester

Application

Fabric Pneumatic Bursting Tester, to determine the bursting pressure of

fabrics uses pneumatic test method, including knits, woven fabric,

non-woven fabric, laminated fabric and other craft-made fabrics.

A test specimen is clamped over and expansive diaphragm by a circular

clamping ring, increasing compressed air pressure is applied to the

underside of the diaphragm, causing distension of the fabric until the test

specimen bursts, the bursting strength and distension are determined.

Real time Testing-curve is shown on the Bursting software, The machine

can be also controlled easily by the graphics touch-screen without

additional computer.


Computer & Special software controlled, automatic clamping and

burst test, automatic calibration, automatic data processing and test

report output.

It can be controlled by its easy to use LCD graphics touch-screen

TF142A/B Digital Bursting Tester

Keywords Bursting strength tester

Description Bursting Tester Digital, To determine the bursting strength of fabric, woven or knitted fabrics,

Paper. Bursting tester complies with ASTM D3786, ISO2758/13938,BS 3424, etc.

Fryma Fabric Extension Tester, to simply and economically determine the stretch and recovery of textile fabrics. Fryma

Fabric Extension Tester complies with BS 4294.

instead of computer.

Bursting pressure up to 1500KPa (15Bar or 200psi), accuracy ≤

±0.2%F·S

Burst distension up to 70mm

Equipped with lamp for clear observation.

Transparent acrylic cover ensures safe operation

4 most commonly used test areas are available and be easily

shifted

Test area: 100, 50, 10, 7.3 cm2 (112.8, 79.8, 35.7, 30.5 mm Dia.)

Standards ISO 13938-2, ASTM D3786, IWS TM29

Power/Air 220 /110 V 50/60 Hz 0.4 ~0.7 MPa

Weight 60 Kg


TF143 Fryma Fabric Extension Tester

Application

Fryma Fabric Extension Tester, to simply and economically determine

the stretch and recovery of textile fabrics, both knitted and woven. The

apparatus consists of a loading frame with clamps and a screw

tensioning device, two 3kg loading weights and sample cutting

templates.

Specification

Test time: 10+/-3 s


Loading weight: 3 Kg / 6 Kg

Standards BS 4294

Weight 15 Kg

Dimensions 360x170x170mm(LxWxH)

TF144A Button Impact Tester

Application

Button Impact Tester, to determine the impact resistance of plastic

sew-through flange buttons to a falling mass of 0.84kg (29.5oz),

released from a height of 67mm (2.625 inches) or other heights as

required. Cracking, chipping or breakage constitutes failure.

Button Impact Tester, to determine the impact resistance of plastic sew-through flange button. Button Impact Tester

complies with ASTM D5171.

Specifications

Impact Quality：0.84Kg

Testing Height: 32, 44, 67, 83, 95, 117, 200mm


Weight 3 Kg


TF144B Izod-type Impact Machine

Application

Izod-type Impact Machine, to determine all types of buttons (10mm

diameter and over) to violent blows encountered during clothing

manufacture or use, by a pendulum of a specified mass released from a

specified height to strike the button, observe and record if the button

breaks, fractures, or distorts.

Specifications

Mass of hammer: 53g

Mass of rod: 16g

Button holders: 16 holders

Standards BS 4162

Weight 6 Kg


TF145 Snap Tester

Application

Snap Tester, to determine the holding or breaking strength of prong-ring

attached snap fasteners onto garments or toys, also as a Push Pull

Tester applies for compression and tensile testing of small

samples(special attachments are available).

Snap tester Consists of an upper snap clamp, a lower fabric clamp and

force gauge mounted on a stand, a hand wheel on the bottom of snap

tester which allows fine control with convenient operation.

The snap component is gripped by the Upper Snap Clamp and the

garment is fixed to the lower Fabric Clamp. By turning the hand wheel,

The operator can apply a specific force and the holding force or the

breaking strength can be recorded. The capability of Snap tester can be

enhanced with clamps & accessories for testing of other Snaps, Jean

Buttons, Four Hole Buttons & Garments Accessories such as Zippers,

Bows, Appliqué, Toggles, Hooks/Bars, and D-Rings, amongst others.

Related testers(optional order)

The detachment of a snap or other part may be classed as small parts;

whilst broken small parts may require sharp point & sharp edge testing.

As a result, additional testing equipment may be recommended, such

as: Small Parts Cylinder, Sharp Point Tester, Sharp Edge Tester, Button

Impact Tester, etc.

TF145 Snap Tester

Keywords pull tester, pull push tester, button snap tester

Description Snap tester (pull tester), to determine the holding or breaking strength of button or snap fasteners

onto garments or toys. Snap tester(pull tester) complies with ASTM PS79/F963, EN71-1, etc.


Imada Force Gauge FB-30K (300N, Resolution 2N, Accuracy

+/-1%FS) - 1 Pc

Lower Fabric Clamp, Lever Armlocking - 1 Pc

Upper Stud Clamp - 1 Pc

Upper Snap Clamp -1 Pc

Three Pronged Clamp - 1 Pc

Two Pronged Clamp with screw - 1 Pc

Lower Grasp Button Kit - 1 Pc

Long Nose Vise Grip - 1 Pc

Calibration: 15 lbs Calibration Weight - 1 Pc

Safety Goggles - 1 Pc

Rubber Ring - 5 Pcs

Calibration Certificate - 1 Pc

Operation Manual - 1 Pc

Standards ASTM PS79-96, ASTM F963, EN 71-1,

16 CFR 1500.51-53, M&S P115A

Weight 45 Kg


TF147 Pull & Slider Twist Tester

Application

Pull & Slider Twist Tester , to determine the puller and anti-torsion of

metal, plastic, nylon Zipper.

Features

Function, Chinese menu-style operation, blue LCD display, print out

test reports.

Support for online communication, two-way control, standard PC

expert analysis software, dynamic curve shows the testing process.

Special holder, to complete a variety of specifications can easily pull

the first torsional strength testing.

Choose a variety of test patterns: broken test, set the corner test,

constant load tests.

Specifications

Torque range: 0.1 ~ 500 cN · m

Load accuracy: ≤ ± 1% F · S

Reverse speed :0.5-2 r / min (digital setting)

Torsion angle range: 1 ~ 300 degrees

Standard configuration: a gripper, a torque testing device (already

installed on the machine) dot matrix printer, the PC operating

software (computer matching)Speed: 30/min

Standards QB/T2171 QB/T2172 QB/T2173, ASTM D2061

Power 220 /110 V 50/60 Hz 25W

Weight 45 Kg


TF149 Complex Strength Zipper Tester

Application

Complex Strength Zipper Tester, Used for testing zipper strength of

parallel drawing, up-and-down pulling resistance, self-locking,

tail-opened pulling, outlet shifting, association of zip head and chips,and

the strength of polyester silk and zipper ribbons, etc.

Special Zipper Strength Tester software, PC-controlled with AC servo

motor and quality ball-screw for ideal and smooth control.

Specifications

Provided with 7 sets of fixtures/grips for complete zipper tests

PC control and specified Zipper Strength Tester software via high

speed RS232

Drawing and displaying Real-time Force/displacement curve,

Force/time curve, etc. during test.

Quality Ac servo motor drives quality ball screw.

Working pattern：The constant rate of elongation（CRE）principle，

micro computer controlling, testing report printing

Max. load: 250KgF (2500N).

Testing range: 1%~100% of the full range

Testing accuracy: ≤±0.2%F·S

Sample frequency:2000 times / secs

Tensile speed: 0.1-1000mm/min digital speed, error ≤±2%

Instrument max .travel:600mm

Output types: Displaying output, printing output.

Standards BS 3084, ASTM F964,

QB/T2171, QB/T2172, QB/T2173

Power 220 /110 V 50/60 Hz 600W

Weight 60 Kg(standard)

Dimensions 500×630×1200mm (L x W x H)

TF150 Zipper Tester

Application

Zipper Tester, to determine the resistance to reciprocation of zipper

(slide fastener), the test specimen is subjected to a specified number of

cyclic operations whilst under lateral and longitudinal tension.

Zipper Tester catches the head of zipper to do reciprocating movement

in a constant speed for 30 times per minute, Integral counter to stop the

drive when a pre-selected count has been reached

TF150 Zipper Tester

Keywords

Description Zipper Tester, to determine the resistance to reciprocation of zipper (slide fastener) by simulating

cyclic operations under tension. Zipper tester complies with BS3084, CNS-1083, etc.

.

Specifications

Speed: 30/min

0-10 Kg lateral force.

0-5 Kg longitudinal force

Counter: 1-999,999times,adjustable

Standards BS 3084, CNS -1083, QB/T2171-1995

Power 220 /110 V 50/60 Hz 4 A

Weight 40 Kg


TF151 Velcro Tester

Application

Velcro Tester. To determine the capability of Velcro used for shoes,

garments, etc.

Cut the specimen 540mm by 20 or 50mm in dimension from the sample

being tested into the wheel of Velcro tester to be fitted completely. To

achieve Velcro (hook & loop) to repeated stripping and peeling After a

certain times. Use tensile machine (another purchase) to measure its

peeling strength (AS) and shear strength (PA) after this test.

Features

PLC closed-loop controller controls Ac-servo-motor ensures

accurate and durable running.

Rigid construction and advanced AC servo motor ensures quiet

running.

Transparent plastic cover ensures safe and convenient operating.

Impact appearance and firm construction design.

Specifications

Upper Roller: Dia. 162+/- 0.5 mm, 70 mm in width

Lower Roller: Dia. 160+/- 0.5 mm, 70 mm in width

Roller Speed: 60+/-5 r/min

Load: 1+/-0.1 N/mm

Number of test cycles: 5,000

Sample Dimensions: 300mmx300mm

Counter: LCD display, 1- 9, 999 times, adjustable

Standards BS EN ISO 22776, DIN-3415, SATRA TM 123

Velcro Fatigue Tester. To determine the fatigue capability of Velcro used for shoes, garments, etc. Velcro tester

complies with DIN-3415, SATRA PM 123, JSB 39-93, etc.

Dynamic Seam Fatigue Tester. To determine the strength of upholstery seam constructions covering a standard foam

composite cushion by imposing a cyclic, impact and penetrating load, complies with ASTM D4033.

Water/Vapour TF160 -169

Power 220 /110 V 50/60 Hz 3 A

Weight 75 Kg

Dimensions 450x540x550 mm (LxWxH)

TF152 Dynamic Seam Fatigue Tester

Application

Dynamic Seam Fatigue Tester. To determine the strength of upholstery

seam constructions covering a standard foam composite cushion by

imposing a cyclic, impact and penetrating load.

Dynamic Seam Fatigue Tester consists of 3 work positions. A

rubber-faced wheel of 127mm (5”) diameter impacts the fabric from a

height of 150mm (6”) with a mass of 3.75 kg (8.25 lb), 25 times per

minutes for 7000 cycles. Compressed air is required.

Specifications

Testing frequency: 25+/-2 cycle/min

Testing cycles: 7,000

Impacting mass: 3.75 kg

Foam composite: 228.5 x 280 x 178 mm

Dimensions of sewn specimen: 360 x 255 mm

Driving mode: Pneumatic


Power / Air

Supply 220 /110 V 50/60 Hz 0.4 ~ 0.7 Mpa

Weight 350 Kg


TF160 Spray Rating Tester

Application

Spray Rating Tester, to determine the surface wetting resistance of

fabrics, which may or may not have been given a water-resistant or

water-repellent finish.

Spray rating tester consists of a metal framework allowing distilled water

to be sprayed through a nozzle onto a test specimen at 45° and 150mm

below the nozzle. The appearance of the specimen is compared against

an optional photographic scale.

TF160 Spray Rating Tester

Keywords

Description Spray Rating Tester, to determine the surface wetting resistance of water-resistant/repellent

finished fabrics. Spray rating tester complies with AATCC 22, ISO 4920, EN24920 etc.

Rainproof Tester, to determine the penetration resistance of fabrics or composites at different intensities of water

impact. Rainproof Tester complies with AATCC 35, BS EN ISO 22958 etc.

Specifications

Nozzle: 19 holes of 0.9mm diameter

Angle of holder: 45°

Holder: 150 mm Dia. 150mm below the nozzle


Measuring Cup: 250ml

Photographic Rating Chart (AATCC 22)

Standards ISO 4920, AATCC 22, BS EN 24920, BS 3702

M/S P23/P133, NEXT 23

Weight 12 Kg


TF161 Rainproof Tester

Application

Rainproof Tester, to determine the penetration resistance of fabrics or

composites at different intensities of water impact. Simulated rain

horizontally impacts fabric samples mounted vertically in a stainless

steel bath. Samples are backed with a standardized blotting paper which

is weighed before and after each test. The rain is formed by a column of

water which can be adjusted from 600mm to 2400mm.

Specifications

Test Dimensions: 200x200mm

Blotting Paper Dimensions: 152x152mm

Sample Nip Width: 152mm

Sample Nip Space Between: 165mm

Sample Nip Dimensions: 178x229mm

Nozzle Diameter: 0.99±0.013mm

Nozzle Space Between sample: 305mm


AATCC Blotting Paper 500 x 1000mm (20 x 40in) 25 Sheets

Standards AATCC 35, BS EN ISO 22958

Weight 30 Kg


TF162A Crumpleflex Tester

Crumpleflex Tester, to determine the degradation to water resistance of coated fabrics due to crumpling and flexing in

use. Crumpleflex Tester complies with ISO 8096, BS 3424 etc.

Application

Crumpleflex Tester, to determine the degradation to water resistance of

coated fabrics due to crumpling and flexing in use. The equipment tests

a tube of fabric by twisting it through 90o stretching alternately

compressing the tube at the same time. After completion of the test the

fabric is tested for resistance to penetration by water. Crumpleflex Tester

fitted with electronic pre-determined counter with automatic stop at a

pre-determined number of cycles, also fitted with acrylic plastic interlock

safety cover.

Features

Impact design of construction and appearance

Acrylic safety cover ensures safety in operation

Simple and convenient operation ensures stable and smooth

running.

Standard accessories

4 pcs of sample clamps

1 pcs of screwdriver

1 pcs of Acrylic safety cover

1 pcs of sample cutting template

Standards ISO 7854, BS 3424.9, GB/T 12586

Power 220 /110 V 50/60 Hz 3 A

Weight 55 Kg


TF163A Hydrostatic Head tester

Application

Hydrostatic Head Tester, used for determining accurately and swiftly the

resistance of fabrics (coated, uncoated & non woven) and films to water

penetration under pressure while firmly clamped in the test rig of

standard area, by means of dynamic test method and static test method.

The bank is linked to a test head to which the specimen is clamped

quickly and stably by means of a hand wheel.

After starting the hydrostatic pressure test, the test pressure is

automatically controlled; hydrostatic head test result is digitally

displayed. The test specimen is observed visually for evidence of

penetration by water. The test area is well illuminated and an

unobstructed observation of the sample is from all sides greatly

facilitates the visual drop detection. 100cm2 hydrostatic head is

included.

Specifications

5 test methods are included.

Pressure Range: 0-2,000 mbar(20 m water column )

Holding force: 5,000N

Increasing rate of water pressure: 10-500 mbar/min

Accuracy: 2 mbar

TF163 Hydrostatic Head tester

Keywords

Description Hydrostatic Head tester, to determine the resistance of fabric and films to penetration by water.

Hydrostatic head tester complies with AATCC 127, ISO811, BS 3321 etc.

Specimen Holder: 100cm2

Standards

AATCC 127, ISO 811/1420A, EN 20811, BS 3321, JIS

L1092 B-b, DIN53886, ERT 120-1/160-0, GB/T 4744,

AFNOR GO7-057

Power 220 /110 V 50/60 Hz 3 A

Weight 60 Kg


TF163B Hydrostatic Head Tester

Application

Hydrostatic Head Tester, to determining the resistance of fabrics

(coated, uncoated & non woven) and films to water penetration under

pressure while firmly clamped in the test rig of standard area, by means

of dynamic test method and static test method. The tank is linked to a

test head to which the specimen is clamped quickly and stably by means

of a hand wheel.


automatically controlled; hydrostatic head test result is displayed digitally

and a test curve is generated automatically and displayed on the large

colourful touch screen display. The test specimen is observed visually by

the LED lamp fitted for evidence of penetration by water. The test area is

well illuminated and an unobstructed observation of the sample is from

all sides greatly facilitates the visual drop detection.

Features

PLC closed-loop controlled with large touch panel.

Large touch screen displays test result, force - and - time curve, set

values, etc.

Manual clamping device ensures stable force.

Built in with 2 test patterns (pressure raising and holding mode)

Built in water tank, and heating device to heat distilled water up to

20 or 27 degree Celsius.

The unique Pressure-balance-system ensures stable and accurate

increasing speed of pressure

Equipped with a LED lamp to observe test process clearly

Acrylic protective cover ensures safe cooperation, and a stainless

steel mirror fitted for convenient observation

Specifications

Pressure Range: 0-2,000 mbar(20 m water column )

Holding force: 10,000N

Increasing rate of water pressure: 10-300 mbar/min

Accuracy: 0.5 mbar


Standards


L1092 B-b, DIN53886, ERT 120-1/160-0, GB/T 4744,

AFNOR GO7-057

Power 220 /110 V 50/60 Hz 100 W

Weight 70 Kg


TF163C Hydrostatic Head tester

Application

Hydrostatic Head Tester, used for determining the resistance of fabrics

(canvas, coated fabrics, cover cloth, rainproof clothing fabrics and

geotextile materials) and films to water penetration under pressure while

firmly clamped in the test rig of standard area, by means of dynamic test

method and static test method. The bank is linked to a test head to

which the specimen is clamped quickly and stably by means of a

automatic clamp.


automatically controlled; hydrostatic head test result is digitally

displayed. The test specimen is observed visually for evidence of

penetration by water. The test area is well illuminated and an

unobstructed observation of the sample is from all sides greatly

facilitates the visual drop detection. 100cm2 hydrostatic head is

included.

Specifications

The unique water pressure raising rate balance system is achieved

by PLC closed-loop controlled servo motor drives pistons.

Variable test method can be selected, test time and variable

pressure increasing rate can be set and saved.

Real-time test results are shown on the large colourful touch panel,

and can be saved and output to computer.

5 test methods are included:

Pressure raising mode, Constant-pressure mode, Constant

pressure & fixed time mode, Extending-relaxing mode, Water

penetration and leakage mode

Water tank and heating device to heat distilled water up to 20 or 27

degree Celsius.

Equipped with a LED lamp to observe test process clearly

Pressure Range: 0 - 200kPa (20 m water column). 500kPa or

1000kPa are offered on request.

Automatic clamp with holding force: 5kN


Standards


L1092 B-b, DIN53886, ERT 120-1/160-0, GB/T 4744,

AFNOR GO7-057, FZ/T01004

Power 220 V 50 Hz 200W

Weight 60 Kg

Dimensions 560x400x600mm (LxWxH)

TF163D Hydrostatic Pressure Tester

Application

Hydrostatic Pressure Tester, Used to test water-proof or leakage of fibre,

synthetic leather, wrapped paper, etc.

The test ways as below（i.e. get the average value of three operations,

calculated to the first decimal）:

Leakage measurement: raise water position to 10cm. To measure

the water volume（ml）leaked during certain time.

Water pressure: raise water position at speed of 1cm/sec, the

record the actual water position when three locations of surface of

specimen get water penetration.

Fixed water pressure: raise water position to certain height at speed

of 1cm/sec.Then pause, immediately record the time (sec) when

three locations of surface of specimen get water-penetration.

Specifications

Specimen: 20*20cm

Water column height: 1800mm

Water level speed: 1cm/sce

Pressure Diameter: fibre and knitting wears Dia.115mm. Synthetic

leather / leather Dia.50mm

Standards ISO 811, BS EN 20811/3321/3324 , DIN 53886 ,

AATCC 127, JIS-L1092, JIS-1096, JIS-K6550

Power 220 V 50 Hz 2A

Weight 192 Kg

Dimensions 520×660×2550 mm (LxWxH)

TF164 Computerized Air Permeability Tester

Application

Air Permeability Tester, to determine the resistance of fabrics (woven,

knitted and non woven textile materials) to the passage of air (air flow)

under constant pre-set air pressure while firmly clamped in the test rig of

selected test head/area.

The specimen is loaded to the test area of the instrument easily by

means of a pneumatic holder. By pressing down the holder to start the

test. Air permeability tester equipped with a vacuum pump to draw air

through an automatic interchangeable test head with a circular opening.

The pre-selected test pressure is automatically maintained, and after a

few seconds the air permeability of the test specimen is digitally

displayed in the pre-selected unit of measure on the LCD screen or

computer (not included). After test the holder is released and the

vacuum pump is shutoff.

TF164 Air Permeability Tester

Keywords

Description Air Permeability Tester, to determine the resistance of fabrics to the passage of air under

constant pre-set.., air permeability tester complies with ASTM D737, EN ISO 9237/7231, etc.

TF165 Water Vapour Permeability Tester

Keywords

Specifications

Can be controlled by both computer (Air permeability test software

is offered) or the LCD display.

Test result is displayed on LCD or computer, units can be shift

Automatic sample clamping and interchanging of test head

6 Test Heads are included: 5, 20, 50, 100sq.cm, and Ф50mm

(19.6sq.cm), Ф70mm (38.5sq.cm).

11 nozzles are included.

Pressure Range: 1～4000pa

Max thickness of specimen: ≤ 8mm

Permeability ratio: 1～40000mm/s

Measuring accuracy: < 2%

Standards

ASTM D737, ISO 9237/7231, BS 5636, JIS L 1096A,

DIN 53887, EDANA 140.1, AFNOR G07-111, TAPPI

T251, GB/T 5453 / 13764, GB/T13764

Power 220 /110 V 50/60 Hz 2 Kw

Weight 80 Kg

Dimensions 1250×700×1250mm (L x W x H)

TF165 Water Vapour Permeability Tester

Application

Water Vapour Permeability Tester, to determine the resistance of textiles

and textile composites (particularly action wear fabrics) to water vapour

penetration. Water vapour permeability tester consists of 8 containers

with water reservoirs, a standard permeable fabric cover, sample holder

ring and precision drive system.

Water vapour permeability tester should work in conditioning room or

conditioning chamber. Wet-cup can be converted to do different test.

Specifications

Rotation Speed：2rpm

Wet-Cup：8 Pcs

Counter: adjustable, automatically stop

Standards ISO8096, BS 3424, BS 7209

Power 220 /110 V 50/60 Hz 3 A

Weight 25 Kg


Description Water Vapour Permeability Tester, to determine the resistance of textiles and textile composites

to water vapour. Water vapour permeability tester complies with BS 3424/7209, etc.

Laboratory Conditioning Chamber. For the conditioning of samples prior to testing, also applied for Water Vapour

Permeability Testing when equipped with related kits. complies with BS 3424/7209, etc.

TF166 Laboratory Conditioning Chamber

Application

Laboratory Conditioning Chamber. For the conditioning of samples prior

to testing, also applied for Water Vapour Permeability Testing when

equipped with related kits.

Critical parts are imported, thus provides precise conditions from 20% to

98% RH ± 2 and -40°C to 150°C ± 0.5°C. Custom-designed and built

chambers of any required capacity up to room size, with conditions down

to - 20°C are available, quotations on request.

Specifications

Capacity: 80L,150L, 250L Customization is available

Display: Touch-screen Display

System: PLC system, programmable

Temperature Range: 0 ~ 94℃+/-1℃, (- 40℃ ~ 150℃ on request)

Humidity Range: 20%-90%+/-2%

Time Display: 0-99.9h

Circle Airflow Speed: 0.2m/s,0.3m/s,0.4m/s,0.5m/s

Testing Area: ≥3000mm2

Testing Cup Count: 8-16-32

Standards ISO 2528, ASTM E96, ASTM D1653, BS 7209, BS

3424, JIS Z0208, GB 1037

Power 220 /110 V 50/60 Hz 4 A

Weight 250 Kg


TF167 Surface Water Absorption Tester Ex Works Price(USD$) 585.00

Application

Surface Water Absorption Tester, to determine the ability of a terry fabric

to rapidly absorb and retain liquid water from surfaces such as human

skin, dishes, and furniture.

Specimens are placed at an angle on the base of the apparatus, after

water flows down the surface of each specimen, the amount of water

retained by each specimen is measured. Six specimens are tested,

three on the face of the fabric and three on the back of the fabric. The six

observations are averaged to determine the surface water absorption of

the fabric.

Made of quality stainless steel, good-looking and convenient operating.

(For Reference Only)

Description Surface Water Absorption Tester, to determine the absorption ability of a terry fabric, Terry fabric

surface water absorption tester complies with ASTM D4772, GB/T 22799, etc.

Shrinkage TF170-179

产品名称 Steaming Cylinder

关键字 Shrinkage to steaming

Description Steaming cylinder is used to determine the shrinkage of unstressed fabric samples subjected to

steaming in a closed chamber, Steaming cylinder complies with ISO 3005, BS 4323, ect.

Specifications

Pour Spout: 30+/-2mm (1.18 +/- 0.08 in.)

Angle of holder: 60°

Time of water flow: 50ml within 8s

Distance between Spout and Specimen: 6 +/- 4 mm (0.24 +/- 0.16

in.)

Standards ASTM D4772-2009, GB/T 22799-2009

Weight 10 Kg


TF170 Steaming Cylinder

Application

Steaming Cylinder, equipped with built-in Steam Generator. The

steaming cylinder is used to determine the shrinkage of unstressed

fabric samples subjected to steaming in a closed chamber. The

Steaming Stability Template is suitable for use with steaming cylinders

when testing fabrics for relaxation shrinkage, to mark the fabrics before

testing using a benchmark of 250mm and to read shrinkage directly in

percentage after testing.

Provided with a stainless steel fabric supporting frame to accommodate

4 samples.

Specifications

Timer: LCD, timing automatically, 1-9999mins, stops steaming and

warns if met set time.

Equipped with automatic water-supplying device

Equipped with pressure safety device

Equipped with Exhauster and drainage device

Steaming cylinder is made stainless steel

Standards ISO 3005, BS 4323, IWTO 29-76, M&S P8, NEXT15

Power 220 V 50/60 Hz 8 A

Weight 40 Kg


TF171 Shrinkage Oven/Drying Chamber

Application

Shrinkage Oven/Drying Chamber, Used for the flat drying of fabric,

clothing and other textiles after shrinkage test, and applied to the textile

sample drying of printing and dyeing.

Specifications

Two models with two Interior size: 1600x600x1050 /

1000x600x1050mm(LxWxH)

Sample shelves: 6

Drying mode: forced hot air

Temperature range: 40-80+/-5OC

Standards ISO 6330 , GB/T 8629

Power 3Phase/380 V 50/60 Hz 5.5Kw

Weight 350/280 Kg

Dimensions 2000x750x1550 / 1400x750x1550 mm(LxWxH)

TF172 AATCC Standard Washer

Application

AATCC Standard Washer, Top-loading home laundry washing

machine, Selected and certified for AATCC Test methods

requiring repeated home laundering (methods AATCC 88 B+C,

124, 130, 135, 142, 143, 150, 172, and 179). Available in US

domestic and international electrical specifications.

Standards AATCC 88 B+C, 124, 130, 135, 142, 143, 150,

172, 179

Power 220 / 110 V 50 / 60 Hz

Weight 80 Kg


TF173 AATCC Standard Dryer

Application

AATCC Standard Dryer, Front-loading dryer, used with standard

washer. Selected and certified for AATCC Test methods requiring

repeated home laundering (methods AATCC 88 B+C, 124, 130,

135, 142, 143, 150, 172, and 179). Available in US domestic and

international electrical specifications.

Standards AATCC 88B+C, 124, 130, 135, 142, 143, 150,

172, 179

Power 220 / 110 V 50/60 Hz

Weight 70 Kg


TF174 Wascator FOM 71 CLS Lab Washer-extractor

Application

Wascator FOM 71 CLS Lab Washer-extractor. Standard

reference washing machine. Microprocessor controlled, up to 999

washing and drying programmes can be designed as required,

input via the keyboard and stored in memory. The unit is

programmed as standard with BS, ISO, and IWS test

programmes.

Automatic Soap Dispenser, for multiple washing.extracting cycles

without intervention. Makeweights, stability templates and rules,

reference detergents, bleaching agents and conditioners also

available, see following specifications.

Marks and Spencer Test Programme. Pre-programmed before

delivery only. For M&S accredited suppliers only.

Standards

M&S P1, P1A, P3A, P12, P91, P99, P99A, P134

BS EN 25077/26330, ISO 5077/6330, IEC 456

Power 220 / 110 V 50/60 Hz

Weight 200 Kg


TF175 Standards Tumble Dryer

Application

Standard Tumble Dryer, used for the test of drying process and of

the drying procedures needed by other textiles, which are

prescribed in the standard textiles test purposed household

cleaning and drying procedures.

Specifications

type: front-loading, horizontal drum

Diameter drum: φ58cm±1cm

Drum volume: 100L

Revolution speed: 50r/min

Number of lift sheets: 3pieces with 120° between each one

Rated drying capacity: 5kg

Controlled air outlet temp.: less than 80 deg.

Standards GB/T8629, ISO06330

Power 220 / 110 V 50/60 Hz 3KW

Weight 38 Kg


TF176 Fully Automatic Shrinkage Tester

Application

Fully Automatic Shrinkage Tester , Used for testing the dimensional

stability of fabrics, clothing and other textiles after washing.

Specifications

Type:A Model washing machine;Load from the front door with a

flat roller.

Interior rowing box diameter:（51.5±0.5）cm

Interior rowing box depth:（33.5±0.5）cm

Inside and outside cylinder radial distance :（2.8±0.1）cm

Number of lift sheets: 3pieces with 120° between each one

Raised wing height:（5±0.5）cm

Revolution speed : Washing:52r/min, Dehydrating:(500±20)r/min;

Water Level Control:low level:10cm high level:13cm

Temperature Detection:interior temp.--99℃±1℃，

Distinguishability:0.1℃

Heating power: 5.4±2%KW

Rated loading capacity:5kg

Standards GB/T8629 GB/T8630 ISO6330/5077 FZ/T70009

Bs4923 EN25077/26330 JIS 1909 M&S IWS

Power 220 / 110 V 50/60 Hz 6.5KW

Weight 150 Kg


TF177 Standard Dry-cleaning Machine

Application

Standard Dry-cleaning Machine, used for physical index test of all kinds

of fabrics and garments after they are washed by detergent and organic

solvent and oven dried.

The only one model that totally complied with all major standards, to truly

simulate the standard dry-cleaning condition.

Features

16 bit controller, Digital display and program-controlled,

Program-controlled Air pressure valve, Multi failure protection and

Alarm.

Built-in 5 fully-automatic test programs, 1 programmable test

program.

Total sealed pipeline system, Liquid cycle filter design, drying

Abrasion/Pilling/Snagging

Abrasion TF210-219

system uses active carbon filter.

Working parts are made of stainless steel.

Individual liquid adding tank, automatically measure and add liquid.


Rotating Cage: diameter 650mm x length 320mm

Capacity / Dried weight: 6 kg

Washing speed: 47 r /min

Dewater speed: 450 r /min

Drying time: 4～60min

Max. drying temperature 80 ℃

Standards

ISO3175.1 - 1:1998, ISO3175.1 - 2: 1998, AATCC

158, FZ80007.3－1999, GB/T11401.1-1989,

FZ/T01083-2000, GB/T 19981.2

Power 380 V 50/60 Hz 3-phase 4-wire system

Weight 850 Kg

Dimensions 1720 x 1200 x 1850 mm (L x W x H)

TF178 Shrinkage Board

Application

Shrinkage Board, suitable for all shrink testing standards. High

transparent plexiglass plate. Frame size 610mmX610mm, included

500mm, 380mm (18 inches), 250mm (10 inches) 3 standards. Thickness

is 5mm, crossed hole with width 5mm, the length and width of the cross

hole are 60mm.

Standards

Weight Kg

Dimensions 610 x 610 x 5mm (LxW)

TF210 Martindale Abrasion and Pilling Tester

Application

Martindale Abrasion and Pilling Tester. To determine the abrasion and

pilling resistance of all kinds of textile structures. Samples are rubbed

against known Abadan’s at low pressures and in continuously changing

directions and the amount of abrasion or pilling is compared against

standard parameters.

The unique design of martindale tester allows removal of individual

sample holders for examination without lifting the top motion plate.

Martindale tester provides individual counters and parking function,

interval time settable, large touch-screen display, Standard sample

holders and 9 and 12kpa weights are included.

Martindale Tester is available with 4, 6, 8 or 9 test positions

Specifications

Drive system: PLC, programmable control with big Touch-screen

Abrasion test

a) Max stroke of movement: 60.5+/-0.5mm

b) Weight of holder and spindle: 200+/-1g

Pilling test

a) Max stroke of movement: 24+/-0.5mm

Weight of holder and spindle: 155+/-1g

Models

TF210A Martindale Abrasion And Pilling Tester-4 Heads

TF210B Martindale Abrasion And Pilling Tester-6 Heads

TF210C Martindale Abrasion And Pilling Tester-8 Heads

TF210D Martindale Abrasion And Pilling Tester-9 Heads

Standard Accessories (included)

Abrasion test (To ISO 12947-1)

a) Table specimen mounting weight(2.5+/-0.5kg, 1Pc

for both abrasion and pilling test)

b) Abrasion tester holder (Dia. 38 mm,Set of 4)

c) Large loading weight(395+/-17 amount to holeder

etc, set of 4)

d) Small loading weight(595+/-7g amount to holeder

etc, set of 4)

Pilling Test (To ISO 12945-2)

a) Linear adaptor. To convert to straight-line motion.

b) Sample Retaining Rings for pilling test (Pack of 4)

c) Pilling test holder (Dia. 90mm,set of 4)

d) Loading weight(260+/-1g, set of 4)

e) Auxiliary device for specimen mounting

Optional orders (Excluded)

a) Test Specimen Cutter. (38mm diameter/12cm²) with

cutting mat and spare blades.

b) Abradent Fabric & Backing Felt Cutter. (140mm

diameter/154cm2) with cutting mat and spare blades.

c) Standard Wool Abradent Fabric SM25. 1.6M wide x 5M

length – For abrasion test and pilling test(when relevent)

d) Standard Backing Foam. Width 1.5M, Length 0.5M.

e) Standard Backing Wool Felt Piece (woven) - 1m x 1.5m.

f) EMPA Photographic Standards for Pilling Test (3 x 4

knitted)

g) EMPA Photographic Standards for Pilling Test (3 x 4

woven)

h) SM 50 Photographs for Pilling Test IWS + ASTM.

Standards

EN ISO 12945-2/12947-1, ISO 20344, ASTM 4966/4970, BS EN 388/530, BS 3424/5690, JIS

L1096, DIN 53863/53865, GB/T 13775, SATRA TM31, IS 12673, IWSTM 112/196, IWTO

40-88, SFS 4328, NEXT 16

Power 220 /110 V 50/60 Hz

Weight 90 Kg

TF210A/B/C/D Martindale Abrasion and Pilling Tester

Keywords Martindale Tester

Description Martindale Abrasion and Pilling Tester. To determine the abrasion and pilling resistance of all

kinds of fabrics. Martindale tester complies with ISO 12945/12947, ASTM 4966, etc.

TF211 Pilliscope Assessment Viewer

Keywords Viewing Cabinet

Description Pilliscope Assessment Viewer / Viewing cabinet, Suitable for all standards where the assessment

of pilling on fabrics is... Assessment viewer complies with ASTM D3512, ISO12945


TF211 Pilliscope Assessment Viewer

Application

Pilliscope Assessment Viewer / Viewing cabinet, Suitable for all

standards where the assessment of pilling on fabrics is necessary,

whether against control fabrics or photographs.

The viewer Suitable for the following test: Martindale Pilling, Random

Tumble Pilling, ICI Pilling, ICI Snagging, Brush/Sponge Pilling

Specifications

Observe zone: 340x165x240 mm

Light source: CWF (CWF lamp)

Standards ISO 12945, ASTM D3512/ D4970/5362, IWSTM 152,

BS5811

Power 220 /110 V 50/60 Hz 1 A

Weight 8 Kg


TF212 Oscillatory / Wyzenbeek Abrasion Tester

Application

Wyzenbeek Abrasion Tester. Modern ergonomic design to determine

the abrasion resistance of fabrics when rubbed against a standard

abradant or a wire mesh screen with a backward and forward motion

over a curved surface. Wyzenbeek abrasion tester applies to automotive

and furniture industry fabric manufacturers working to US standards.

Motor driven with 4 abrasion heads and electronic digital counter to

control the number of cycles.

A set of Suction manifolds and an Auxilliary vacuum cleaner are

included, consumables are not included

TF212 Wyzenbeek Abrasion Tester

Keywords

Description Oscillatory / Wyzenbeek Abrasion Tester. To determine the abrasion resistance of fabrics rubbed

against a abradant..., Wyzenbeek abrasion tester complies with ASTM D4157

Specifications

Suction manifolds to connect to auxiliary vacuum cleaner

Sealed transmission drive for quieter operation

Testing stations: 4 groups

Oscillatory frequency: 90 cycle/min

Oscillatory arc: 76 mm(inch)

Consumables

Rubber Pads for Wyzenbeek (pack of 8)

Wire mesh screens for Wyzenbeek (pack of 4)

Abradant Fabric #10 Cotton Duck - 60in x 5yds


Power 220 /110 V 50/60 Hz 3 A

Weight 80 Kg


TF213 Universal Wear Tester

Application

Universal Wear Tester, to determine the wear and abrasion resistance of

fabric used in clothing, footwear and industrials. Universal wear tester

Supplies with surface abrasion head (inflated diaphragm method) and

flex abrasion head as well as necessary weights and initial supply of

abradants. Accessories are available for conducting frosting, pilling and

edge abrasion tests.

Universal wear tester fitted with built-in timer and mechanical cycle

counter repeatable and reproducible testing is ensured by consistent

motor speed providing 120 double strokes per minute of 25mm (1in)

stroke length. Improved air injection system for more uniform inflation of

the diaphragm used in surface abrasion testing, and a superior clamping

mechanism for repeatable specimen tensioning.

Tests are run in automatic mode to obtain definite results of high

reproducibility and to lessen the need for operator evaluation of test

results. The digital counter counts the number of cycles to specimen

rupture or can be preset for automatic shutoff without specimen failure.

Users can select the timer mode for accurate countdown of test time

while simultaneously counting the number of abrasion cycles.

http://www.sdlatlas.com/consumable/129/Rubber-Pads-for-Wyzenbeek-(pack-of-8)

http://www.sdlatlas.com/consumable/130/Wire-mesh-screens-for-Wyzenbeek-(pack-of-4)

http://www.sdlatlas.com/consumable/131/Abradant-Fabric-#10-Cotton-Duck---60in-x-5yds

TF213 Universal Wear Tester

Keywords Stoll Quartermaster

Description Universal Wear Tester, to determine the wear and abrasion resistance of fabric used in clothing,

footwear..., Universal wear tester complies with ASTM D3514/3885, AATCC 119/120. etc

Specifications

Rotation Speed: 120rpm

Measuring Range: 25mm

Counter: LCD


Surface Abrasion Kits

Flex Abrasion Kits

Standards

ASTM D3514/D3885/D3886,

AATCC 119/120, FTMS 191/5300/5302,

FORD EFB 15J2/BN 112-01

Power 220 /110 V 50/60 Hz

Weight 43 Kg


TF214A/B Taber Abrasion Tester

Application

Taber Abrasion Tester (Taber Abraser). To determine the wear

resistance of all kinds of structures including fabrics, leather and rubber,

paper, metals, paints, plated surfaces, coated materials, glass etc.

Taber Abrasion Tester (Taber Abraser) uses the X pattern of abrasion

produced by a rotary action of a pair of abrasive wheels. Taber abraser

supplies with a full range of auxiliary weights, specimen holders,

abrasive wheels, wheel refacer and vacuum unit.

Specifications

Grinding Wheel: Dia. 2inch

Wear Round Centre Spacing: 53.2mm

Gyration Speed: 60±1rpm

Counter: LCD, 0-999,999 times

Distance between sample to vacuum tube: 3mm


1 Vacuum cleaner

Grinding Wheel – 18 Pcs of 3 types

Loading weights – 6 pcs for 125cN, 250cN, 750cN

Paster - 1 Pack

Sand Paper - 10 Pcs

Model

TF214A Taber Abrasion Tester (Taber Abraser) - 1 Head

TF214B Taber Abrasion Tester (Taber Abraser) - 3 Head

Standards ISO 5470, ASTM D3884, FED.CCC.5306 / 5309,

TF214A/B Taber Abrasion Tester

Keywords Taber Abraser

Description Taber Abrasion Tester (Taber Abraser). To determine the wear resistance of fabrics, leather, etc.

Taber Abrasion Tester (Taber Abraser) complies with ISO 5470, ASTM D3884 etc

TF215 DIN Abrasion Tester

Keywords Din Abraser

Description Din Abrasion Tester (abraser), to determine abrasion of flexible materials, such as rubber, tires,

leather etc. DIN abrasion tester complies with DIN 53516, ISO 4649, etc

Pilling/Snagging TF220-224

TAPPI T476, DIN 53754 / 53799 / 53109

Power 220 /110 V 50/60 Hz 3 A

Weight 50 Kg


TF215 DIN Abrasion Tester

Application

Din Abrasion Tester, to determine abrasion of flexible materials, such as

rubber, tires, transmission belts, Sole, leather etc. The abrasion tester

provide with a wide testing area to meet the most request. Additional

balance is required.

Specifications

Load Weight: 5N,10N

Roll Dim.: Dia. 150 x Length 460mm

Rotation speed: 40rpm

Holder Moving distance: 4.2mm each rotation

Standards DIN 53516, ISO 4649, BS EN 12770, BS-903,

SATRA TM174, GB/T9867

Power 220 /110 V 50/60 Hz 3 A

Weight 40 Kg


TF220A/B ICI Mace Snag Tester

Application

ICI Mace Snag Tester. To determine the tendency of fabrics to snag (pull

yarn loops from fabric) in normal wear (mace snag). Provided with 4

rotating test cylinders fitted with sleeves of test fabric, mace balls with

tungsten carbide points and controlled by a predetermined electronic

counter.

TF220A/B ICI Mace Snag Tester

Keywords snagging tester

Description ICI Mace Snag Tester. To determine the tendency of fabrics to snag(pull yarn loops from fabric)

in normal wear(mace snag), ICI Mace snag tester complies with ASTM D3939

TF221 Bean Bag Snag Tester

Keywords

Specifications

Snag Mace Diameter: 31.8mm

Mace Weight: 135g

Mace Prominent length: 9.5mm

Rotation Speed: 60+/-2rpm


Tungsten Carbide Points (Pack of 12)

Felt Sleeves (Pack of 4)

Snagging Photographs/Set

Model

TF220A ICI Mace Snag Tester - 2 Stations

TF220B ICI Mace Snag Tester - 4 Stations


Power 220 /110 V 50/60 Hz

Weight 60 Kg


TF221 Bean Bag Snag Tester

Application

Bean Bag Snag Tester, to determine the snagging and picking

resistance of knitted and woven fabrics by tumbling fabrics pillows

containing a weighted bean bag within two separate test cylinders.

The bean bag snagging tester provides with eight pinned bars, rotating

at 20RPM for 100 revolutions. Provided with predetermined electronic

counter.

Specifications

Rotation speed: 20r/min

Work stations: 2

Size of cylinder: Dia. 200mm

Pinned bars: 8 pcs / Cylinder

Needles: 9 pcs / Pinned bar

Bean bag: 450 g

Standards ASTM D5362, JIS L1058

Power 220 /110 V 50/60 Hz 3 A

Weight 44 Kg


Description Bean Bag Snag Tester, to determine the snagging resistance of knitted and woven fabrics by

tumbling fabrics pillows, Bean bag Snag tester complies with ASTM D5362, JIS L1058, etc.

TF222 Brush or Sponge Pilling Tester

Keywords

Description Brush or Sponge Pilling Tester, To determine the pilling of fabrics used in apparel and automotive

interiors, Brush(sponge) pilling tester complies with ASTM D3511, GM9652P, FORD BN 108-03,

etc.

TF222 Brush or Sponge Pilling Tester

Application

Brush or Sponge Pilling Tester, To determine the pilling propensity and

simulate normal wear of knitted and woven fabrics used in apparel and

automotive interiors by brush and/or sponging specimens together in a

circular motion to form pills. Specimens are evaluated under standard

lighting conditions using a pilliscope, light cabinet or similar, against

users' standard fabrics or piling photographs.

Brush or Sponge Pilling Tester complies with ASTM D3511 but it can

also be used for testing according to Ford BN 108-03, GM9652P, and

perform the Ford leather pilling test according to Ford BN 12-4.

Specification

The plate including Polyurethane foam

Circle sample holder: 660g

Height of Nylon brush: 25.4mm

Consist of 6 Holders, rubber edge grips, sandpaper.

Rotation speed: 58 r/min

Sponge dimension: 51x102x152 mm

Optional accessories

Kit for GM 9652P adds 6 square sample holders and automatic

cycle controller

Kit for FORD BN-108-03 adds 6 square sample holders and special

sponge board

Kit for FORD BN12-4 including adapter board, 3 square specimen

holder

Standards ASTM D3511, FORD BN12-4/108-03,GM 9652P

Power 220 /110 V 50/60 Hz

Weight 70 Kg


TF223A/B/C ICI Pilling and Snagging Tester

Application

ICI Pilling and Snagging Tester / Pilling Box. To rapidly replicate pilling or

snagging on fabrics in a fraction of the time due to normal wear.

ICI pilling and snagging tester use a universal drive system with 2 or 4

position, electronic digital counter, and sample mounting fixture. The

TF223A/B ICI Pilling and Snagging Tester

Keywords pilling box, pilling tester,

Description ICI Pilling and Snagging Tester (pilling Box). to determine pilling or snagging on fabrics , the ICI

pilling tester and snagging tester complies with ISO12945-1, BS5811, JIS L1076, etc.

machine Accepts ICI Pilling boxes and drums / Snagging boxes and

drums.

Specifications

Rotation Speed: 60+/-2rpm

Control Mode: Singlechip Control


Pilliscope Assessment Viewer

Models

TF223A ICI Pilling and Snagging Tester

TF223B M&S Pilling & Snagging Drum

TF223C Octagonal Snagging Drum

Standards ISO12945-1, BS 5811, BS 8479, JIS 1058, JIS

L1076, NEXT 19, IWSTM152, M&S P18, P19, P21A,

Power 220 /110 V 50/60 Hz 4 A

Weight 55 Kg (2 station)


TF224A/B Random Tumble Pilling Tester

Application

Random Tumble Pilling Tester. To determine the pilling and fuzzing

characteristics of textile fabrics.

Random Tumble Pilling Tester uses stainless steel impellers rotate

within individually lit aluminium chambers constantly tumbling test

fabrics against cork liners for a pre-determined time controlled by a timer

and audible alarm.

Compressed air is also injected into the chamber to assist in the

tumbling action. With 2 or 4 pilling test chambers. Laboratory standard

compressed air supply required.

TF224A/B Random Tumble Pilling Tester

Keywords Pilling instruments, pilling tester

Description Random Tumble Pilling Tester. To determine the pilling and fuzzing characteristics of textile

fabrics, Random Tumble pilling tester complies with ASTM D3512, DIN 53867, JIS L1076, etc.

Specifications

Size of Testing cylinder: Dia145mm

Rotation speed: 1200r/min


Cork Liner: 1 Pack of 50

Cotton Sliver: 1 pack

Set of 5 Photographic Standards

Model

TF224A Random Tumble Pilling Tester-2 Stations

TF224B Random Tumble Pilling Tester-4 Stations

Standards ASTM D3512, DIN53867, JIS L 1076

Power 220 /110 V 50/60 Hz 3 A

Weight 60 Kg


TF225 Circular Locus Tester

Application

Circular Locus Tester, to determine surface deterioration and quality of

fabrics (wool, chemical fiber, mixed, kitted and woven fabrics). Using an

active friction system, fabric is rubbed against a nylon brush and

abrasive or an abrasive only under controlled conditions. Results of the

test are achieved in minutes. The relative motion of the locus specimen

grip and the abrasive platform is a circle with a relative speed of 60+/-1

r/min. The grip offers pressure to the specimen which is adjustable with

a tolerance of +/-1%. For added control and safety, the machine is

equipped with a self-stop switch.

Specifications

Test motion: Circular Locus of Dia. 40mm

Test speed: 60 ± 1 r/min

Height of Brush: 2 - 12mm, adjustable

Pressure on specimen: 490cN, 590cN, 780cN,.

Dimension of specimen: Dia. 113±0.5mm (100cm2)

Counter: 1 - 9,999 times, stop automatically

Standard Consumables

Standard Abradant gabardine - 2 Pcs

Standard Backing Foam - 4 Pcs

Standard Photographic - 1 Set

Standards GB/T 4802.1-2008

Power 220 /110 V 50/60 Hz

TF225

Circular Locus Tester

Circular Locus Tester, to determine surface deterioration and quality of fabrics (wool, chemical fiber, mixed, kitted and

woven fabrics). Circular Locus Tester complies with GB/T 4802.1

Flammability TF310-317

Weight 45 Kg


TF226 AATCC Accelerotor

Application

AATCC Accelerotor, to rapidly determine abrasion resistance of flexible

materials including textiles, paper, leather and plastics in both wet and

dry conditions. Samples are rapidly tubled within a cylindrical test

chamber lined with an appropriate abrasion material. The tumbling

action is provided by a propeller shaped rotor for a predetermined time

at a predetermined speed. wet and dry

The abrasion resistance is evaluated by determining the weight loss of

the specimen or grab strength loss of the specimen when broken at an

abraded fold line.

Specifications

Test speed: 3000 r/min

S-shape rotor, 114mm.

Test cylinder: Dia 140mm, 70mm depth.

Timer: 0.1s ~ 99h, stops automatically

Standards AATCC 93, M&S P26 / P53, NEXT 31

Power 220 /110 V 50/60 Hz 3A

Weight 26 Kg


TF310A/B 45 Degree Flammability Tester

Application

45 Degree Flammability Tester, to determine fabric flammability under

controlled conditions total automatically (fabric burn test). The 45 degree

fabric flammability tester is safe and easy to operate. Stainless steel test

cabinet with glass observation panel provided with automatic timing of

flame spread in 0.1-second increments from ignition. Brushing Device

including Spare Nylon Brush.

Automatic gas and timing control system including solenoid control gas

valve, ignition time can be set, the rate of flame spread is calculated and

displayed after test finished.

Specifications

Time Display and accuracy: 0-999.9s,0.1s

Ignition time: 1+/-0.05s

TF310A 45 Degree Flammability Tester

关键字

Description 45 Degree Flammability Tester, to determine the fabric flammability under controlled conditions.

45 degree flammability tester complies with ASTM D1230, FTMS191-5908, etc.

TF310C Dry Cleaning and Washing Cylinder

关键字

Dimension of holder: outside 205x76 mm, interior 165x40

Distance from nozzle to specimen: 8mm

Timing: PLC controlled

System and Display: Programmable PLC system to control

automatically, text display


1 Brushing Device

1 No. 50 sewing thread cone

5 sets of sample holder

Models

TF310A 45 Degree Flammability Tester - Large Display

TF310B 45 Degree Flammability Tester - Counter

Standards ASTM D1230, FTMS191-5908, 16 CFR -1610, CALIF

TB117

Power 220 /110 V 50/60 Hz 2 A

Weight 20 Kg


TF310C Dry Cleaning and Washing Cylinder

Application

Dry Cleaning and Washing Cylinder, to determine color fastness to

dry-cleaning and chlorinated pool water (AATCC 162), and applied to

prepare samples for flammability testing of standard 16CFR-1610.

Comprises stainless steel rotating test chamber of 7650ml capacity,

variable speed drive with digital timer and displays.

Specifications

Angle of cylinder axis: 50

Stainless steel made

Rotation speed: 45-50rpm

Counter: LCD, 1-9999mins,autumatically stops

Standards AATCC 162 , 16 CFR Part 1610

Power 220 V 50/60 Hz 4 A

Weight 60 Kg


Description Dry Cleaning and Washing Cylinder to determine color fastness to dry-cleaning and chlorinated

pool water(AATCC 162) , applies to prepare samples for flammability test of standard

16CFR-1610

TF311 Horizontal Flammability Tester

关键字

Description Horizontal Flammability Tester, to determine the flammability of textiles and automotive interior.

Horizontal flammability tester complies with ISO 3795, ASTM D5132, FMVSS 302, etc.

TF311 Horizontal Flammability Tester

Application

Horizontal Flammability Tester, to determine the comparative burn rates

and burn resistance of textiles, particularly those for automotive interior

use. Horizontal flammability tester is safe and easy to operate,

Comprises draft free stainless steel cabinet with observation window,

sample holder and door mounted burner.


valve and automatic ignition timer and controls.

Specifications

Fire nozzle diameter: 9.5mm

Fire height: 38mm+/-2

Sample clamp: 360x100mm

Interior Dimension: 330x50mm

The sample below: 25mm Pitch between metal wire is 25mm

Marked line: Starting point 38mm/End point 292mm from Igniting

point

Distance from Nozzle to Sample: 19mm

Standards ISO 3795, FMVSS 302, DIN 75200, SAE J369, ASTM

D5132, JIS D1201, BSAU 1690

Power 220 /110 V 50/60 Hz 2 A

Weight 18 Kg


TF312 Vertical Flammability Chamber

Application

Vertical Flammability Chamber / Tester for measuring the vertical flame

spread of children's sleepwear, fabrics (fabric burn test), other textile

materials or resilient filling materials used in upholstered furniture.

Comprises a draft free stainless steel flammability chamber with

observation window for easy test viewing. Specimen holders, burner and

associated hardware are dependent on the test standard and must be

specified.

The burner ignites the specimen automatically, ignition time is

programmable, after-flame time and afterglow time are timed

automatically and shown on the LCD

TF312 Vertical Flammability Chamber

关键字

Description Vertical Flammability Chamber to test the vertical flame spread of children's sleepwear, fabrics.

Vertical flammability tester complies with ASTM D6413, FTMS 191-5903, etc.

Specifications

Time Display and accuracy: 0-999.9s, 0.1s

Ignition time: 12+/-2 s or 3+/-0.2 s

Burner size: Dia. 10mm or Dia. 11mm x barrel length 76+/-6mm

Distance from burner to specimen: 19 or 17 mm

Dimension of holder: outside 442 x 76 / 442 x 89mm, interior

356x51 mm





1 Specimen template

4 Char length loading weights

1 Sample Holder

1 Steel scale

Optional Testing Kits

FTMS 191-5903 (fabric)

DOC FF3/71 Children pyjamas / CPAI 84 Camping tentage material

CALIF TB-117 Resilient Filling Materials Vertical

Standards ASTM D6413, CALIF TB117, DOC-FF 3/71

16CFR Parts1615/1616, FTMS 191-5903, CPAI 84

Power 220 /110 V 50/60 Hz 2 A

Weight 40 Kg


TF313 Surface Flash Tester

Application

Surface Flash Tester. The rapid spread of flame over the surface of the

material without ignition of its basic structure, usually applied to pile or

fur fabrics. This flammability tester is safe and easy to operate,

Swivelling butane burner is traversed across the face of the fabric to

determine whether surface flash occurs and to record any damage to the

base fabric


valve and automatic ignition timer and controls.

Specifications

Nozzle moving speed: 150+/-5 mm/s

Nozzle moving distance: ≥300mm

Fire nozzle size: complies with ISO 6941

Testing height of fur: 0-70mm

TF313 Surface Flash Tester

Keywords

Description Surface Flash Tester, to determine the rapid spread of flame over the surface of the material

without ignition of its basic ..., Surface flash tester complies with BS 4569

Fire Height: 0-60mm (adjustable)

Standards BS 4569

Power 220 /110 V 50/60 Hz 2 A

Weight 20 Kg


TF314 Vertical Flammability Tester

Application

Vertical Flammability Tester, to determine the flammability resistance of

vertical oriented fabrics, and 45°inclined fabrics material for toys,

other material to making toys and soft-filling toy.

The gas is controlled by a solenoid valve, ignition time is digitally set and

test result is displayed on large LCD. The improved marker threads

mounting devices ensure easy and fast installation, with accurate burner

and micro switch operated trip threads. 3 optical scanning devices are

used to detect the severance of threads to offer accurate and reliable

timing.

Including PLC controller, LCD operation panel, different accessories and

burners and configurations are required for different test standard,

please specify standard required.

Specifications

Universal flammability tester meets many standards.

Burner moves and ignites specimen automatically.

Burner size: different by standard requirements.

Burner position and inclined angle can be set precisely

Different specimen holder is available.


Control system and display: Programmable PLC system, large LCD

display, optical scanning devices for threads breaking detection,

timing range 0-999.9s and accuracy 0.1s, controlling box is

detachable.

Different gas fuel are changeable

Standards

ISO 6940/6941, BS EN1103/14878,

DIN 54335/54336/66080

BS 5438/5722/5866/5867/6249/6341

Power 220 /110 V 50/60 Hz 3 A

Weight 45 Kg


TF314 Vertical Flammability Tester

Keywords

Description Vertical Flammability Tester, to detect the flammability of vertical oriented fabrics and wool or soft

toy. Vertical flammability tester complies with ISO 6941, BS 5438, DIN 54335 etc.

TF315 Toy Flammability Tester

Keywords

Description Toy Flammability Tester, to determine flammability resistance of finery or toy and children

clothing (toy burn test). Toy flammability tester complies with BS EN71-2, etc.

TF315 Toy Flammability Tester

Application

Toy Flammability Tester, to determine flammability resistance of finery or

toy and children clothing, the toy flammability tester mainly for evaluating

the burning speed and time of the following kinds of toys or children stuff.

Toys to be worn on the head, such as beards, wig and mask etc.

Toy disguise costumes and toys intended to be worn by a child in

play, such as cowboy suits, nurse's outfits and long flowing capes

etc.

Toys intended to be entered by a child, such as toy tents, puppet

theatres, wigwams and play tunnels.

Soft filled toys (animals and dolls, etc.) with a piled or textile

surface.

Specifications

Time Display and accuracy: 0-999.9s,0.1s

Burner size: comply with ISO 6941: 2003

Burner can be positioned to vertical or 45 degree.

Equipped with U-shape holder and hanging holder




Standards BS EN71-2: 2006

Power 220 /110 V 50/60 Hz 3 A

Weight 40 Kg


TF316 Blanket Flammability Tester

Keywords

Description Blanket Flammability Tester, to determine the ignition resistance property of blanket fabrics

(blanket fabric burn test). Flammability tester complies with ASTM D4151

TF316 Blanket Flammability Tester

Application

Blanket Flammability Tester, to determine the ignition resistance

property of blanket fabrics and surface flame spread performance of

fabric. A standardized flame is applied to the surface of specimen for a

special time under controlled conditions, and burning, changing, or

discoloration of a paper monitor is noted to classify flammability of tested

fabric.

Specifications

Stainless steel test cabinet, equipped with transparent viewing

window;

18# needle flame, flame length adjustable;

Igniting time pre-set freely;

Timer accuracy up to 0.01 second;


5 sets of Sample holders

1 set of Brushing device

1 Sample cutting template

1 Paper monitor cutting template

1 Flame length gage

1 Fire nozzle position gage

1 set of Micro-stove for gas supply


Power 220 /110 V 50/60 Hz 2 A

Weight 18 Kg


TF317 Carpet flammability tester

Application

Carpet Flammability tester is used to test the effects of a small source of

ignition on floor coverings. Carpet flammability tester can be used for

either Hot metal nut test (BS 4790) and Methenamine tablet test (ISO

6925, BS 6307 and GB/T 11049)

Test methods (Hot metal nut method, BS 4790)

The stainless steel nut is heated to 900℃ in a muffle furnace, place

specimen on the bottom of the test chamber and the clamping ring is

placed on the specimen, use crucible tongs to place the heated nut in

the center of the ring, remove the nut in 30s and a measurement of

spreading of the ignition on the sample is made to evaluate the

TF317 Carpet Flammability Tester

Keywords

Description Carpet Flammability Tester, to test the effects of a small source of ignition on floorcoverings.

Carpet flammability tester complies with BS 4790, SO 6925, BS 6307, etc.

flammability of carpet.

Test methods (Methenamine tablet method, ISO 6925, BS 6307)

Place the conditioned specimen on the removable base inside the test

chamber and the metal plate with a circular cut-out is placed on the

specimen, the tablet is placed at the centre of the specimen and ignited.

After the flame has extinguished, measurements are made to assess the

effect on the carpet.

Specifications

Complete with measuring grid and clamping ring

Sliding panel for ease access

Angled mirror for convenient viewing

Applicable to 2 different tests

Enclosed unit for optimum safety


Accessories for Hot Metal Nut Test

Accessories for Methanamine Tablet Test

10 M16 metal nuts


Muffle Furnace

M16 Nut for Hot Metal Nut Test

Methanamine Tablets for Methanamine Tablet Test

Standards ISO 6925, BS 4790, BS 6307, CFR 1630/1631, GB/T

11049, CPAI 84

Power 220 /110 V 50/60 Hz 3 A

Weight 15 Kg


TF318 SPI Flammability Tester (Vinyl Material)

Application

SPI Flammability Tester (Vinyl Material), to determine the ignition

properties of vinyl plastic film material according to CFR 16 Part 1611 -

U.S.A. Flammable Fabrics Act for flammability of apparel vinyl plastic

film.

The rate of burning shall not exceed 1.2 in./s as judged by the average

of five determinations lengthwise and five determinations transverse to

the direction of processing, when specimen is placed at an angle of 45

degree and expose to the standardized flame (22# fire nozzle, 1/2 inch.

in length).

Specifications

The most advanced thread locking device and sample holder save

80% of operation time that faster than other suppliers’ design

Equipped with photoelectricity sensor accurately and automatically

record burning time with no damage ensures 5 years life or longer

Timer accuracy up to 0.01 second;

Stainless steel construction, transparent viewing window

22# needle flame, 9/16inch from the specimen, flame length

adjusted by flow-valve;

Timing distance of burning: 6 inch


1 set of main machine. Completed with cabinet, flow-meter, timer,

transparent viewing window, etc.

1 set of sample holder

20 White cotton threads

1 Sample cutting template

5 22# Fire nozzles


Laboratory fume hood

Standards CFR 16 Part 1611

Power 220 /110 V 50/60 Hz 2 A

Weight 30 Kg


TF319A Multi-purpose Textile Flammability Tester

Application

Multi-purpose Textile Flammability Tester, to determine the flammability

resistance of textile fabrics and for the flammability test of toys and toy

materials.

Its vertical test frame with changeable specimen holders and burner

covers offers a wide range of vertical oriented textile fabrics. This

machine meet almost all the BS, EN, ISO and other similar standards

which defined a test method that a vertical oriented fabric subject to a

small flame.


automatically applied to specimen mounted, test result is displayed on

large screen. The improved marker threads mounting are easy and fast,

infrared detectors are used as micro-switch offers accurate and reliable

timing.




Specifications

Meets most vertical oriented tests

Programmable PLC system, Large graphic touch panel, optical

scanning devices for threads breaking detection, timing range

0-999.9s and accuracy 0.1s

Automatic flame ignition and flame application, automatic gas open

/ off.

Automatic change for butane gas and propane gas.

Optional test frame and holder for toys flammability test (EN 71-2)

Optional Radiator Assembly for BS EN 13772

Easy-set device for burner position (surface & edge ignition, toys

test)

Detachable controller ensures safety of operator

Interchangeable Burners (BS 5438 & BS 6941 & EN 71-2)

interchangeable, precision Test Frames for different standards

Vertical and horizontal marker threads

Tray for filter paper and test debris

Standards

BS EN ISO 6940 (1995&2004) / 6941 (1995&2003) /

BS EN ISO 15025, EN71-2,

BS EN 1101 / 1102 / 1103,

BS EN 13772 , BS EN 14878, DIN 66080,

BS 5438 (1976 & 1989)

BS EN71-2: 2006

Power 220 /110 V 50/60 Hz 3 A

Weight 75 Kg


TF319B Complex Flammability Tester

Application

Complex Flammability Tester, to determine the flammability resistance

of vertical oriented fabrics, and 45°inclined fabrics material for toys,

other material to making toys and soft-filling toy.


test result is displayed on large LCD. The improved marker threads

mounting devices ensure easy and fast installation, with accurate burner

and micro switch operated trip threads. 3 optical scanning devices are

used to detect the severance of threads to offer accurate and reliable

timing.




Specifications

Universal flammability tester meets many standards.

Burner moves and ignites specimen automatically.

Burner size: different by standard requirements.

Burner position and inclined angle can be set precisely

Different specimen holder is available.


Control system and display: Programmable PLC system, large LCD

display, optical scanning devices for threads breaking detection,

timing range 0-999.9s and accuracy 0.1s, controlling box is

detachable.

Different gas fuel are changeable

Standards

ISO 6940/6941, EN71-2, BS EN1103/14878,

DIN 54335/54336/66080

BS 5438/5722/5866/5867/6249/6341

Power 220 /110 V 50/60 Hz 3 A

Weight 45 Kg


TF320 NFPA 701-1 Flammability Tester

Application

NFPA 701-1 Flammability Tester, to determine the ignition resistance

properties of draperies and other hanging fabrics according to test

method NFPA 701#1, and it is suitable for single-layer or multi-layer

fabrics, but not suitable for fabrics with density larger than 700g/m2

(21oz/yd2).

Specifications

Open-type burning chamber structure;

Chamber body in calcium silicate board, and wrapped by stainless

steel external;

Standard Meker laboratory burner;

Record burning time automatically;

Auto-ignition mode to avoid operative error;

Timer accuracy up to 0.1second;

Provide with a standard specimen holder.

Standards NFPA 701-2004 Test Method 1

Power 220 /110 V 50/60 Hz 3 A

Weight 80 Kg


TF321 NFPA 701-2 Flammability Tester

Application

NFPA 701-2 Flammability Tester, to determine the ignition resistance

properties of draperies and other hanging fabrics according to test

method NFPA 701#2, and it is suitable for single-layer or multi-layer

fabrics, fabrics with density larger than 700g/m2 (21oz/yd2), and fabrics

coating with polyethylene, etc.

Specification

Stainless steel test cabinet;

Provide with stainless steel metal wire;

Bunsen burner as per requirements of test standard ASTM D5025;

25’’ angle Bunsen burner with auto timer;

Pre-set test time;

Auto ignite mode and extinguishment mode;

Flame height controlled by needle valve.

Color Fastness TF410-418

Standards NFPA 701-2004/2010 Test Method 2.

Power 220 /110 V 50/60 Hz 3 A

Weight 110 Kg


TF322 Upholstery Flammability Test Rig

Application

Upholstery Flammability Test Rig, to determine the ignition resistance

properties of material combinations for upholstered seating. The test rigs

are covered with the standard foam and the fabric under test. The

assembly is then ignited using one of the standard ignition sources and

the combustion process is monitored.

Includes large and small test rig, timer, flow meter and burner tube.

Optional accessories include foam pads, wooden cribs, cutting

templates, and standard cigarettes.

Standards BS 5852 Part 1 / Part 2, ISO 8191 Part 1 / Part 2

Weight 22 Kg

Dimensions 450 x300 x 450 mm(LxWxH)

TU300A/B/C Color Light Box

Application

Color light box / Color matching cabinet, used for color matching or

assessment of all industries and applications where there is a need to

maintain color consistency and quality. E.g. Automotive, Ceramics,

Cosmetics, Foodstuffs, Footwear, Furniture, knitwear, Leather,

Ophthalmic, Dyeing, Packaging, Printing, Inks and Textile.

It is very important to use standard light source to check color difference

in night duty.

Besides D65 light source, TL84, CWF, UV, and F/A light sources are

available in this color light box for metamerism effect.

Specifications

Color matching cabinets Provide several light sources, i.e. D65,

TL84, CWF, UV, F/A

Microcomputer to switch between the light sources quickly.

Super timing function to record use time of each light source

separately.

All fittings are improved, ensuring quality.

Optional Orders

Viewing Board: 2kg,

Model Light Sources Dimension(mm) G. Weight

TU300A D65, TL84, F, UV 710x420x570 40 kg

TU300B D65, TL84, CWF, F, UV 710x420x570 40 kg

TU300A/B/C Color Light Box

Keywords color matching cabinet

Description Color light box, used for textile color matching of most industries and applications. Besides D65

light source ,TL84,CWF, UV, and F/A light sources are available in this color light box

Two webpage of these two products should be made up with different name.

TU300C D65, TL84, CWF, F, UV,

U30

710x540x625 50 kg

Standards ASTM D1729, BS 950 PART1, DIN 6173,

M&S C1/C2, NEXT 11

Power 220 /110 V 50/60 Hz

TU311B Color Proof Station

Application

Color Proof Station is designed especially for color comparison

between objects and samples during the printing process. It adopts

CPL asymmetrical color proof light tool and can illuminate two

working surfaces, i.e. the vertical surface with the samples and the

horizontal surface with objects. The drawer beneath the working

table can house films, PS plate. It is equipped with rolling track,

which enables it to slide under weight.

The tables in some products can move up and down so as to

satisfy the special viewing demands of certain customers.

Specifications

Working Table: 1350 x 905mm, 5 - 30 degree adjustable

Light source: Imported 6500K/5000K fluorescent tubes, 5 x 5000K

or 6 x 6500K (selectable on request)

Number of Drawer: 5

Standards ISO 3664: 2000

Power 220 /110 V 50/60 Hz 180 W

Weight 150 Kg

Dimension 1450 x 1100 x 1350 (mm)

TF410 Crockmeter

Application

AATCC Crockmeter, to determine the colour fastness of textiles to dry or

wet rubbing.

The new Crockmeter equipped with a electronic counter and simple

mechanism to offer easy operation and reliable fastness test.

Specification

Rubbing head: Dia.16mm

Vertical pressure: 9N+/-10%

Rubbing stroke: 100mm


AATCC rubbing clothing 1 box

Sand paper 2 (pcs)

Rings 2 (Pcs)

TF410 Crockmeter

Keywords rubbing fastness tester, aatcc crockmeter

Description Crockmeter, to determine the color fastness to Dry or wet rubbing (rubbing fastness), Crockmeter

complies with ISO 105 x12,AATCC 8,BS 1006-D02, NEXT 10,etc.

TF411 Crockmeter Electronic

关键字 rubbing fastness tester, aatcc crockmeter

Description Electronic crockmeter, to determine color fastness to rubbing (rubbing fastness). Electric

crockmeter complies with ISO 105 x12, AATCC 8, BS 1006-D02, NEXT 10,etc.

90

Standards

ISO 105x12/D02, AATCC 8/165,

BS 1006-D02, BS 4655, NEXT 10,

M&S C8/C8A/C25/C52

Weight 15 Kg


TF411 Electronic AATCC Crockmeter

Application

Electronic AATCC Crockmeter, to determine the colour fastness of

textiles to dry or wet rubbing. A pinned acrylic sample holder ensures

rapid sample mounting and repeatability of results. Crockmeter Fitted

with a pre-determined electronic counter for strokes up to 999,999 times

Specification


Vertical pressure: 9N+/-10%

Rubbing stroke: 100mm

Rubbing speed: adjustable

Counter: LCD, 1-999,999times, automatically stops



Sand paper 2 (pcs)

Rings 2 (Pcs)

Standards

ISO 105x12/D02, AATCC 8/165,

BS 1006-D02, BS 4655, NEXT 10,

M&S C8/C8A/C25/C52

Power 220/110 V 50/60 Hz 2 A

Weight 21 Kg


TF412 Rotary Vertical Crockmter

Application

Rotary Vertical Crockmeter, to determine the colour fastness of textiles

to dry or wet rubbing particularly for printer fabrics. Rotary crockmeter

applies 1134 grams of pressure on a 16mm finger and rotate 1.125 turns

TF412 Crockmeter Rotary

Keywords rubbing fastness tester, aatcc crockmeter

Description Rotary crockmeter, to determine the color fastness to rubbing (rubbing fastness). Rotary

crockmeter complies with AATCC 116 , ISO 105 x16,etc.

TF413 Rubbing Fastness (Gakushin) Tester

Keywords Gakushin fastness tester

clockwise then anti-clockwise.

The operating handle is however turned in one direction only.

Specification


Vertical pressure: 1134g

Rotation: 1.125turns



Sand paper 2 (pcs)

Rings 2 (Pcs)

Standards AATCC 116, ISO 105 X16

Weight 11 Kg


TF413 Rubbing Fastness (Gakushin) Tester

Application

Rubbing fastness (Gakushin) tester for JIS standards, for evaluating a

material's resistance to rubbing motion. Unit is a six station, benchtop

machine which includes clamps for sample attachment to moving platen

and clams for weighted rubbing arm for attachment of rubbing material.

Cycle counter automatically stops machine at the end of test cycles. Test

samples are visually evaluated. Includes two sets of test heads (6 heads

each set) weighing 200g and 500g each, complete set of weights (6

each) of 100g, 300g, 400g and 800g which fit either test head. Each test

arm is counterbalanced to offset arm weight. Suitable for dry and wet

rubbing tests.

Specification

Work station: 6

Specimen: 220x30mm

Head weight: 200g,500g

Weights: 100g,300g,400g,800g

Counter: LCD, 1-999,999 times, automatically stops

Standards JIS 10801/0823/0849/1084 , TR369B

Power 220/110 V 50/60 Hz 3 A

Weight 50 Kg


Description Rubbing fastness (Gakushin) tester used for JIS standards, for evaluating a material's resistance

to rubbing motion. Gakushin fastness tester complies with JIS standards JIS 10801,etc.

TF414 IULTCS Rubbing fastness Tester

Keywords Leather fastness tester

Description IULTCS rubbing fastness tester, to determine the color fastness to rubbing. Leather Fastness

tester complies with standards SATRA PM 173, EN 344, DIN 4843, ISO 11640, etc.

TF414 IULTCS Rubbing Fastness Tester

Application

IULTCS Rubbing Fastness Tester, designed to carry out a rub fastness

test on the surface of leather to determine the amount of ‘marring’ of

the leather surface or the finish and to assess the amount of color

transfer from the sample to the rubbing pad under dry or wet

conditions.

The unique design of IULTCS Rubbing Fastness Tester allows reliable

and stable test result.

Impact appearance and construction design offers a good shape and

convenient operation, also allows a long life time without repairing.

Available with a piece of 500g loading weight, thus allows a test with

500g or 1000g loading.

Equipped with a extension device so samples can be extended at a

required rate.

Aavailable with 1 and 3 test positions

Specification

Rubbing finger: 500 +/- 25 g(or 1000g by adding a load mass)

Loading weight: 500 +/- 10 g

Dimension of base of finger: 15 x 15 mm

Specimen: 120x20mm

Rubbing stroke: 35 ~ 40 mm

Speed of rubbing: 40 +/- 2 cycles/min

Counter: LCD,1-999,999 times, automatically stops


Load mass: 1 piece (500+/-10g)

Standards ISO11640, EN344, SATRA PM 173, DIN 4843,

QB/T 2537

Power 220 V 50/60 Hz 2 A

Weight 30 Kg


TF415A/B/C Scorch Tester / Sublimation Tester

Application

Scorch Tester (Sublimation Fastness tester), to determine fabrics Ironing

color fastness and sublimation color fastness, and dimensional stability

under hot dry conditions.

Heating plate temperature and the distance between are adjustable,

equipped with electronic temperature controller and the top plate with

precisely controlled weight. The independent heating plate ensures

controlling test temperature, time and thickness of sample individually.

Specification

Counter: 1-999,999 times, automatically stops and alarms

Temp. Range: 0 - 230 Deg. C

Pressure: 4kPa+/-1kPa

Heating temp. control mode: Individual control for each top and

bottom plate

Models

TF415A (1, 3, 5 stations are available, specified in order)

Heating plate: 4 x 1.13inch (102 x 29mm)

TF415B (1, 3, 5 stations are available, specified in order)

Heating plate: 5 x 5inch (125 x 125mm)

TF415C (1 station)

- Heating plate: 8.25 x 8.25inch(210 x 210mm)

TF415D (1, 3, 5 stations are available, specified in order)

- Heating plate: 100 x 40mm (ADID TM5.09)

3 stations is LCD display.

Standards

ISO 105, BS 1006, AATCC 92/114/117/133,

DIN 54022/54060, JIS L0879/L0850/L0879

GB/T 5718/6152

Power 220/110 V 50/60 Hz 4 A

Weight 20 Kg

Dimensions 350X300x230 mm(LxWxH)

TF415D Scorch Tester / Sublimation Tester

Application

Scorch Tester (Sublimation Fastness tester), to determine fabrics Ironing

color fastness and sublimation color fastness, and dimensional stability

under hot dry conditions.

Heating plate temperature and test time are adjustable, fitted with

microprocessor temperature controller and the top plate with precisely

controlled weight. The independent heating plate ensures controlling test

temperature and thickness of sample individually.

Specification

Large LCD display, convenient setting and operation.

3 pairs of heating plates, heating temperature of each upper and

lower plate can be set individually.

Each heating plate can be set heating ON or heating OFF.

Timer: 1 ~ 249s, automatically stops heating and alarms

Temp. Range: R.T. ~ 240

Temp. Accuracy: +/- 2 Deg. C

Pressure: 4kPa+/-1kPa

Heating temp. control mode: Individual control for each top and

TF415 Scorch Tester / Sublimation Tester

Keywords

Description Scorch Tester / Sublimation tester, to determine Ironing color fastness and sublimation fastness

of fabrics, Scorch tester complies with standards ISO105,AATCC 92,BS 1006,etc.

TF416 Perspiration Tester / Perspirometer

Keywords

bottom plate

3 stations with heating plate dimensions 120mm x 50mm

Standards

ISO 105, BS 1006, AATCC 92/114/117/133,

DIN 54022/54060, JIS L0879/L0850/L0879

GB/T 5718/6152

Power 220/110 V 50/60 Hz 4 A

Weight 35 Kg


TF416 Perspiration Tester / Perspirometer

Application

Perspiration Tester / Perspirometer to determine colour fastness test to

water, sea water, perspiration fastness in textiles and sublimation during

storage. Perspiration tester consists of a stainless steel frame with 21

acrylic separator plates to hold 20 samples. An electric precise oven is

required.


AATCC Test Kit

Weight: AATCC weight with other parts in total 4.54kg(10lb)

Acrylic Plates (Pack of 21)

ISO Test Kit

Weight: AATCC weight with ISO extra weight and other parts in

total 5kg(11lb)

Acrylic Plates (Pack of 22)

Standards

Perspiration: AATCC 15 , EN ISO 105 E04 , DIN

54020 , JIS L0848 , BS 1006 E04

Water: AATCC 107, EN ISO 105 E01 , DIN 54006 ,

DIN54005 , JIS L0846 , BS 1006 E01

Sea water: AATCC 106 , EN ISO 105 E02 , DIN

54007 , JIS L0847 , BS 1006 E02

Weight 10 Kg


Description Perspiration Tester / Perspirometer to determine colour fastness to water, perspiration fastness

in textiles. Perspiration Tester / Perspirometer complies with AATCC 15,107,106,ISO 105.etc.

TF416B Perspiration Tester Kit

Application

Perspiration Tester, to determine colour fastness test to water, sea

water, perspiration fastness in textiles and sublimation during storage.

Perspiration Tester Set consists of a precise Lab incubator, and 2

stainless steel frames with 22 acrylic separator plates to hold 20

samples, 20 plastic basins are equipped for pre-treatment of samples.


1 set of AATCC Test kit

1 set ISO Test kit

20 Plastic basins

1 Precise Lab Incubator ( 40 liters volume and temp. range up to

250 oC, Large LCD)

Standards

Perspiration: AATCC 15 , EN ISO 105 E04 , DIN

54020 , JIS L0848 , BS 1006 E04

Water: AATCC 107, EN ISO 105 E01 , DIN 54006 ,

DIN54005 , JIS L0846 , BS 1006 E01

Sea water: AATCC 106 , EN ISO 105 E02 , DIN

54007 , JIS L0847 , BS 1006 E02

Weight 50 Kg


TU320 Lab Oven / Incubator

Application

Lab Oven/Incubator, works with Perspiration Tester to determine the

colorfastness of fabric to perspiration and water, for dual-purpose which

is forced-air convection can provide direct assistance as well as reliable

guarantee to colleges, scientific research institutes and laboratories.

Features

Polished stainless-steel chamber, semicircular arcs at corners for

easy cleaning, and the space between the shelves in the chamber

is adjustable

Microprocessor temperature controller ensures a precise and

reliable control

Uniform distribution of air temperature

Forced-air convection

Double layer glass door, larger viewing window

Forced-air and heating stops automatically once the door opened

Can be connected to computer to record data of

temperature(option)

TU320 Lab Oven/Incubator

Keywords

Description Lab Oven / Incubator, works with Perspiration Tester to determine the colorfastness of fabric to

perspiration and water, for dual-purpose which is forced-air convection can provide...

Specification

Temp. Range/Accuracy: RT+10-200OC / 0.1

OC

Ambient Temp.: +5-40 O

C

Timing Range: 1-9999min

Shelves: 2 pcs

Interior size:

30L 340x320x320 mm (WxDxH)

80L 450x400x450 mm (WxDxH)

Power 220/110 V 50/60 Hz 0.85Kw/1.1Kw

Weight 30 Kg

Dimensions 620x530x490mm / 740x620x630mm(LxWxH)

TU320B Precise Lab Oven / Incubator

Application

Lab Oven/Incubator, for dual-purpose which is forced-air convection can

provide direct assistance as well as reliable guarantee to colleges,

scientific research institutes and laboratories.

Features

Polished stainless-steel chamber, semicircular arcs at corners for

easy cleaning, and the space between the shelves in the chamber is

adjustable

Large LCD display.

25mm dia. test hold in the left side of Chamber.

Microprocessor temperature controller ensures a precise and

reliable control

Uniform distribution of air temperature

Forced-air convection

Double layer glass door, larger viewing window

Forced-air and heating stops automatically once the door opened

Can be connected to computer and printer to record data of

temperature(option)

Specification

Temp. Range: RT+10-200OC / RT+10-200

OC

Temp. Accuracy: 0.1 O

C

Ambient Temp.: +5-40 O

C

Timing Range: 1-9999min

Shelves: 2 pcs (40L&80L), 3pcs (150L&250L)

Interior size:

40L 350*320*350 mm (WxDxH), 80L 400*350*500 mm (WxDxH)

150L 500*360*800 mm (WxDxH), 250L 520*460*1050 mm (WxDxH)

Power 220/110 V 50/60 Hz

0.85Kw -40L

1.55Kw-80L

2.05Kw-150L

2.45Kw-250L

Weight 30 Kg

Dimensions

40L 480*556*650 mm (WxDxH),

80L 530x620x804 mm (WxDxH)

150L 645*640*1110 mm (WxDxH)

250L 665*730*1164 mm (WxDxH)

TU380 Salt Spray Tester

Application

Salt Spray Tester is used to test the anti-erosion quality of the surface of

all materials after the rust-proof of painting, coating, electroplating,

anoding and rust-proof of greasing.

Specification

Test chamber: 120 L

Temp. test: NSS.ACSS 35℃ ±1℃/ CASS 50℃ ±1℃

Temp. air: NSS.ACSS 47℃±1℃/CASS 63℃±1℃

Interior dim. : 650x 400 x 450 mm

Test solution volume: 15 L

Standards ASTM B117, GB/T2423.17

Power 220 V 50/60 Hz 4 A

Weight 70 Kg


TF417 Gas Fume Chamber

Application

Gas fume chamber, to determine the burnt gas fume colorfastness of

textiles when exposed to atmospheric oxides of nitrogen derived from

the combustion of gases.

A specimen of the textile and the test control fabric are exposed

simultaneously to oxides of nitrogen from burnt gas fumes until the

control shows a change in color corresponding to that of the standard of

fading. The change in color of the specimen is assessed with the

standard gray scale for assessing change in color.

Includes testing chamber, burning and control chamber, rotating sample

rack, standardised gas burner, test duration timer and exhaust port (to

be connected to extractor system). Temperature controlled automatically

and can be red digitally on the large display..

Specification

Control system: programmable

Display: large text screen

Temperature system: closed-loop controlled, programmable.

Six samples can be test simultaneously

TF417 Gas Fume Chamber

Keywords

Description Gas fume chamber, to determine the burnt gas fume colorfastness of textiles when exposed to

atmospheric oxides ... Gas fume chamber complies with AATCC 23, ISO 105-G02

Standards AATCC 23, ISO105-G02, BS EN ISO 105-G02

Power 220 /110 V 50/60 Hz

Weight 90 Kg


TF418A/B/C/D/E Washing Fastness Tester

Application

Washing Fastness Tester, to determine color fastness to washing or

dry cleaning to ISO, BSI, AATCC and Marks & Spencers standards.

Available in different sizes such as portable washing fastness tester,

two baths type, etc.

The washing fastness tester uses stainless steel rotor to holds

washpots on each of four sides and rotates at a constant 40 rpm (+/-2

rpm). Washpots are preheated in appropriate test solution.

Containers are sealed with either a Neoprene rubber gasket or optional

Teflon gasket.

To offer a reliable and safe washing fastness test, Washing fastness

tester equipped with water-lacking alarm, protection device when

To carry our the tests of AATCC and ISO standard fast, TESTEX

redesigned the model TF418E which with two baths to offers a

maximum combined capacity of 16 vessels, the baths have completely

separate controls and drive systems, so they can be used as two

independent machines for ISO and AATCC standards

opening door, Test-finished alarm, etc.

Stainless-steel balls and pieces are included

TF418A / TF418B / TF418C / TF418D

TF418E (For Reference Only)

Specifications

Rotation speed: 40+/-2/rpm

AATCC cup volume: 1200ml

ISO cup volume: 550ml

Temp.: Max 98 oC, adjustable

Running time: adjustable

TF418A TF418B TF418C TF418D TF418E

Baths 1 1 1 1 2

AATCC Pots (pcs) 2 4 6 8 6

ISO Pots (pcs) 2 4 6 12 12

Steel Balls (pcs) 40 80 120 200 200

Steel Pieces (pcs) 4 8 12 16 16

Power (V / Hz / A) 220/50/8 220/50/8 220/50/8 380/50/10 380/50/20

Weight (kg) 30 50 65 120 110

TF418 Washing Fastness Tester

Keywords

Description Washing fastness Tester – Two Baths, to determine color fastness to washing or dry cleaning to

washing fastness methods, washing fastness tester complies with ISO 105, AATCC 61 etc.

TF419

Light Fastness Tester (Mercury-Tungsten Lamp)

Light Fastness Tester (Mercury-Tungsten Lamp), to determine the colour fastness and degradation due to the effects

of sunlight on textiles, Light Fastness Tester complies with BS 1006

Dimension (LxWxHmm) 760x300x600 750x600x700 850x600x700 1120x600x1100 950x750x1000

Standards

AATCC 61/86/132/151/190, ISO105-C01/C02/C03/C04/C06/C07/C08/C09/D01/E03/E12,

BS 1006, M&S C4A/C5/P3B/C10A/C11/C26/C37/C49A/P137,

NEXT 2/3/5, IWSTM 7/115/177/193/199/240/241, FTMS 191-5610/5622

TF419 Light Fastness Tester (Mercury-Tungsten Lamp)

Application

Light Fastness Tester (Mercury-Tungsten Lamp), an economical general

light fastness testing machine, to determine the colour fastness and

degradation due to the effects of sunlight on textiles.

Features

Economical General Duration testing machine for sunlight

Mercury tungsten light for simulation of light fading by sunlight

12 sample holders included can be tested at same time and 10 samples

can be packed in each holder.

Equipped with Rapid fade unit.

Standards BS 1006 UK/TN

Power 220 V 50 Hz

Weight 25 Kg


TF420 Light & Weather Fastness Tester

Application

Light & Weather Fastness Tester , to determine color fastness to light,

weather and light aging of various colored textiles and other materials by

simulating both light and dark cycles and nature weather conditions by

specimen holders and rack sprays and long-arc-xenon lamp equipped.

Features

Light intensity set digitally, real-time monitoring, automatically adjust

to meet the different standards required for testing the stability of

light source (optional 420nm; 340nm or 300-400nm band

monitoring)

Blackboard Thermometer (BPT), the Standard Blackboard

Thermometer (BST), Irradiance detector and samples placed in the

TF420

Light & Weather Fastness Tester

Light & Weather Fastness Tester, to determine color fastness to light, weather and light aging of various colored

textiles, Light and weather fastness tester complies with ISO105-B02/B04, AATCC 16, etc.

same position, a true reflection of the sample under test conditions,

the data displayed as figures, charts, curves on the large color

screen, no need to stop for observation.

Detection and wireless transmission using light energy conversion

technologies for energy, not the other home power supply.

10.4 inch color display, a variety of test monitoring modes

(animation, digital, graphics) operate easily and clearly.

Sample holders can be timed independently to achieve different

tests simultaneity in the same machine

Rated 2500W long arc xenon lamp simulate daylight spectrum.

Industrial temperature control (cooling) system offers quickly and

smoothly control

Ultrasonic humidifier, professional dehumidification system to

ensure accurate and stable humidity conditions.

Equipped with self-circulation system and air filtration system,

significantly reducing the environmental requirements.

Quality assurance of 1000 hours continuous running.

Specifications

Working modes: To simulate and reinforce the impact of the nature

of the measured object, providing light, temperature, humidity, rain

and other quantitative indicators.

Light source: 2500W air-cooled long-arc xenon lamp

Temperature range: 25 ~ 50 ℃, Resolution: 0.1 ℃

Humidity range: 10 ~ 95% RH, Resolution: 0.1%

Test time control: 1000h

Irradiance: 1.00 ~ 1.50W/m2/420nm, Accuracy: ±

0.02W/m2/420nm, Digital set, automatic compensation

Sample holder:

ISO / GB: 135 x 45mm, 10 Pcs only

AATCC: 100 x 75mm, 5 Pcs only

Sample can be holder on both sides

Rotation speed of sample holder: revolution 5r/min; rotation of

180°/r

Independent timing of sample holders: ≤ 1000h

Standard blackboard thermometer: 40 ~ 80 ℃; Resolution: 0.1 ℃

Standards

ISO105-B02, GB/T8427, ISO105-B04, GB/T8430,

AATCC 16-2003, GB/T14576, GB/T15102-2006,

GB/T15104-2006

Power 220 V 50 Hz 5KW

Weight 220 Kg


TF421 Tabletop Light Fastness Tester

Application

Tabletop Light Fastness Tester is a powerful Xenon instrument with

affordable price for conducting accelerated tests of light fastness and

photo stability test.

The TF420 is designed as a tabletop unit with a microprocessor

controller for simple operation.

Specification

Microprocessor control with large LCD displays data and

Irrandiance-wavelenth curve.

Air cooled Xenon lamp with 1.5KW measure, control and display of

irradiance energy form 250 to 765 W/m2 in 420 nm.

Measure, control and display of black panel temperature (BPT /

BST) from 9 to 90℃.

Measure and control temperature relative humidity of test chamber,

and displayed on large LCD.

Setting and display the cumulate light energy and xposure time.

Record the using time of Xenon lamp.

Speciment talbe with 200 x 280 mm exposure area.

Standards AATCC16

Power 220 V 50 Hz 4 KW

Weight 48 Kg


TF422 Water-cooled Light & Weather Fastness Tester

Application

Water-cooled Light & Weather Fastness Tester, to determine the color

fastness, aging resistance of textiles, plastics, rubber products or

materials by objecting to the simulated conditions of nature weather

(daylight, rain, temperature and humidity, etc.). The tester simulates both

light and dark cycles and nature weather conditions by rack sprays and

water-cooled long-arc-xenon lamp equipped.

Features

Larger experimental warehouse design, large sample size hanging

bar, max 6900cm2 / 3500cm2 exposure area.

Light intensity set digitally, real-time monitoring, automatically adjust

to meet the different standards required for testing the stability of

light source (optional 420nm; 340nm or 300-400nm band

monitoring)

Blackboard Thermometer (BPT), the Standard Blackboard

Thermometer (BST), Irradiance detector and samples placed in the

same position, a true reflection of the sample under test conditions,

the data displayed as figures, charts, curves on the large color

screen, no need to stop for observation.

Detection and wireless transmission using light energy conversion

TF422

Water-cooled Light & Weather Fastness Tester

technologies for energy, not the other home power supply.

10.4 inch color display, a variety of test monitoring modes

(animation, digital, graphics) operate easily and clearly.

Sample holders can be timed independently to achieve different

tests simultaneity in the same machine

Equipped with Water-cooled Rated 6500W/4500W long-arc-xenon-

lamp, truly simulates the daylight spectrum.

Professional water circulation system, reduce operating costs.

Industrial temperature control (cooling) system offers quickly and

smoothly control

Ultrasonic humidifier, professional dehumidification system to

ensure accurate and stable humidity conditions.

Equipped with self-circulation system and air filtration system,

significantly reducing the environmental requirements.

Cooled by circulating water chillers / water cooling two options to

choose from.

Quality assurance of 1000 hours continuous running.

Front and back sides spray pattern on samples.

Specifications

Working modes: To simulate and reinforce the impact of the nature

of the measured object, providing light, temperature, humidity, rain

and other quantitative indicators.

Light source:6500W / 4500W Water-cooled long-arc xenon lamp

Temperature range: 20 ~ 93℃, Resolution: 0.1℃

Humidity range: 10 ~ 95% RH, Resolution: 0.1%

Test time control: 1000h

Irradiance: 0.8 ~ 2.50W/m2/420nm (selectable with 340nm or

280-800nm), Digital set, automatic compensation

Sample holder:

ISO / GB: 135 x 45mm, 10 pcs only

AATCC: 100 x 75mm, 5 pcs only

Sample can be holder on both sides

Rotation speed of sample holder: revolution 1-10rpm; rotation of

180°/r

Independent timing of sample holders: ≤ 1000h

Standard blackboard thermometer: 40 ~ 120℃; Resolution: 0.1℃

Standards

AATCC 16, AATCC 169, ISO105-B02/B04/06,

ISO03917, ISO11341, ISO4892, ASTM G26,

ASEJ 1885KJ / 1960KJ, GB/T 8427 / 8430,

GB/T 14576, GB/T 12831, GB/T 1189, GB/T 9344,

GJB150. 7, GB/T 16422.1, GB/T 1865, GB/T 2423.24

Power 380 V 50 Hz 12 KW

Weight 460 Kg


Water-cooled Light & Weather Fastness Tester, to determine the color fastness, aging resistance of textiles, plastics,

rubber products or materials by objecting to the simulated conditions of nature weather (daylight, rain, temperature and

humidity, etc, complies with ISO105-B02/B04/06, AATCC 16, etc

Sampling

TF510A/B/C Electric Fabric Scissors

Keyword Electric Scissors

Description Electric Fabric Scissors, Various cutter blades are available and easily replaceable .Electronic

Scissors can be used for cutting cloth, card boards, leather, paper boxes, etc.

TF510A/B/C Electric Fabric Scissors

Application

Electric Fabric Scissors, Various cutter blades are available and easily

replaceable .Electronic Scissors can be used for cutting cloth, card

boards, leather, paper boxes, etc.

Abandonment type tool bit, replacement fast convenient, may match

fitting of the different demand.

Battery or A/C powered.

Models

TF510A Electric Fabric Scissors: Short Blade for accurate curve

cutting.

TF510B Electric Fabric Scissors: Smooth Blade head for fast

straight cutting .

TF510C Electric Fabric Scissors: With Base Plate for stable cutting

Power 220 / 110 V 50/60 Hz

Weight 2 Kg


TF511A/B Rotary Cutters

Application

Fabric Rotary Cutter, cuts materials with smooth edge by an electric

round knife, the rotary cutter widely applied to many industry, including

clothing, leather, rubber, blankets, carpets, furniture, sofas, and umbrella

making industry, etc.

Silent, safe and reliable. Easy to operate, the cutter only weight 0.5kg,

including removable grindstone, easy to grind the knife without tools,

NI-H rechargeable battery.

Model

TF511A Fabric Rotary Cutter

High peed motor for cutting soft and thick fabric, paper, etc.

TF511B Fabric Rotary Cutter

Low speed motor, for cutting hard and thick material, such as carpet ,

leather products, etc.

TF511A/B Rotary Cutters

Keyword Fabric Rotary Cutter

Description Fabric Rotary Cutter, cuts materials with smooth edge by a electric round knife, the rotary cutter

widely applied to many industry, including clothing, leather, rubber, blankets, carpets, furniture,

sofas, and umbrella making industry, etc.

TF512 Swatch Cutter

Keyword Fabric Sample cutter, Fabric Pattern Cutter

Specifications

Dimension of blade: Dia. 42mm

Cutting thickness: 10mm

Battery or A/C power

AC POWER / NI-H rechargeable battery

Power 220 / 110 V 50/60 Hz 30 W

Weight 1 Kg

Dimensions 280x220x50mm(LxWxH)

TF512 Swatch Cutter

Application

Electric Swatch Cutter, Cuts fabric sample (pattern, swatch) of 450mm

cutting length and 100 cutting depth with safe, quick and accurate

operating.

Features

The lightest swatch cutter in the world .(6 kg only)

Bearing drive circular blade.

Installation in 3 minutes on any table top.

Laser alignment cutting.

Right angle rail for parallel swatch cutting.

Scale cutting mat for speedy measurement

Specifications

Cutting blade: 1year life / Dia. 80mm circular blade(pitch 5mm)

Cutting thickness: 10mm

Cutting length: 450mm

Scale cutting mat: 500*500mm (double side usable)


Cutting blade: 1Pcs / 1year life

Scale cutting mat: 1Pcs / 6 months life

Power 220 / 110 V 50/60 Hz

Weight Cutter: 7 Kg / Mat: 3Kg

Dimensions Cutter: 930x330x170 / Mat: 600x600x40mm (LxWxH)

Description Electric Swatch Cutter, Cuts fabric swatch (pattern, sample) of 450mm cutting length and 10mm

cutting depth. Swatch cutter offers quick and accurate cutting.

TF513 Circular Sample Cutter

Keyword GSM Cutter

Description Fabric Circular Sample Cutter / Gsm Cutter, The circular sample cutters cuts 100cm2 fabric

sample for GSM. Gsm sample cutter saves time and cuts fabric sample precisely.

TF513A/B/C/D Circular Sample Cutter

Application

Fabric Circular Sample Cutter / Gsm Cutter, The circular sample cutter

cuts fabric sample in various dimension, such as 100cm2 for GSM, Dia.

140mm for matindale test, etc. Cut accurate fabric circular samples with

smooth edges by drawing action even difficult materials such as fabric,

thin films, tissue paper, and corrugated cardboard and synthetic leather

can be cut by the sample cutter conveniently.

The cutting pad is made of porous rubber, which allows the sample

cutter to cut into the base with complete safety.

Models

TF513A Circular Sample Cutter --100cm2 / Dia. 113mm(4.44 in dia.)

x 5mm depth --For European Fabric Yield System

TF513B Circular Sample Cutter -- Dia. 68.53mm (2.698 in) x 5mm

depth --For U.S. Fabric Yield System

TF513C Circular Sample Cutter -- Dia. 38mm/12cm² x 5mm depth

--For Martindale Abrasion and Pilling Tester

TF513D Circular Sample Cutter Dia. 140mm/154cm² x 5mm

depth --For Martindale Abrasion and Pilling tester


Spare blades (4pcs)

Cutting pad (1 pcs)

Weight 3 Kg


TF514 Electric Circular Sample Cutter

Application

Electric Circular Sample Cutter/GSM Cutter, this circular sample cutter

cuts 100cm2/113m diameter x 5mm cutting depth for GSM. High speed

motor driven with rechargeable battery and safety lock. Cut accurate

circular fabric samples with smooth edges by drawing action even

difficult materials such as fabric, thin films, and tissue paper, corrugated

cardboard and synthetic leather can be cut by this sample cutter

conveniently.

TF514 Electric Circular Sample Cutter

Keyword Electric GSM Cutter

Description Electric Circular Sample Cutter/GSM Cutter, this circular sample cutter cuts 100mm2 sample for

GSM. Gsm electric sample cutter saves time and cuts fabric sample precisely.

TF515 Pneumatic Sample Press

Keyword Fabric cutting machine

Specifications

Super Alloy Steel Cup Knife with high speed makes a neat cutting of

sample

Equipped with safety lock

Use direct current, can be used instantly when the plug is

connected

Cutting size: 100cm2/113mm diameter x 5mm cutting depth


Spare blades (4 pcs, 3 months life time / 2pcs)

Cutting pad (2 pcs, 3 months life time / piece)

Power 220 /110 V 50/60 Hz

Weight 5 Kg


TF515 Pneumatic Sample Press

Application

Pneumatic Sample Press, a new type of desktop sample press, to cut

samples for testing or other use. Equipped with 125 mm cylinder, Cutting

depth of 10mm and 125 x 125mmn table. Under the pressure of 1100 psi

can produce 500-800kg/f pressure, equipped with a double bond

security operation. Can be requested to provide special shape die.

Laboratory standards compression air is required.


Circular Die: 100cm2 /Dia. 113mm (4.44 in Dia.) - For European

Fabric Yield System, GSM

Circular Die: Dia. 68.53mm (2.698 in) - For U.S. Fabric Yield

System, GSM

Circular Die: Dia. 38mm/12cm² - For Martindale Abrasion and

Pilling Tester

Circular Die: Dia. 140mm/154cm² - For Martindale Abrasion and

Pilling tester

Standards ISO3801, ASTM D3776/2646, BS 3424/2471, BS EN

12127, M&S P65/65A

Air Source 0.5-0.7 Mpa

Weight 40 Kg


Description Pneumatic Sample Press, a new type of desktop sample press, to cut samples for testing or

other use. Sample press equipped with 125 mm cylinder, Cutting depth of 10mm and 125 x

125mmn table

TF516 Silent Lab Compressor

Keyword Dental compressor

Description Silent Laboratory Compressor. Suitable for the provision of instrument quality compressed air

with silent operation, Maximum pressure 8 bars (120psi) tank size 24.5L (6.5 U.S. gallons)

TF516 Silent Laboratory Compressor

Application

Silent Laboratory Compressor. Suitable for the provision of instrument

quality compressed air with silent operation. Maximum pressure 8 bars

(120psi) tank size 24.5L (6.5 U.S. gallons) maximum displacement 50

litres/minute (1.8 cubic feet/minute). Noise level 45dB (A) at 1 metre.

Supplied complete with intake air filter, outlet air/oil filter/regulator and

fittings. Larger capacities available, details on application.

Specifications

Max Pressure: 8 bars (120psi)

Tank size: 24.5L (6.5 U.S. gallons)

Max displacement: 50 L/minute (1.8 cubic feet/minute).

Noise level: 45dB

Power 220 /110 V 50/60 Hz 550 W

Weight 33Kg


TF515 Sharp Edge Tester

Application

Sharp Edge Tester, to determine whether accessible edges on toys or

other products are likely to cause injury. A self-adhesive PTFE tape is

attached to a mandrel, which is then rotated for a single 360-degree

revolution along the accessible edge being tested. If the tape is cut in

half or longer in length (approx. 13 mm), the edge is identified as a

hazardous sharp edge. Toys intended for use by children under 8 years

old are subject to this requirement before or after use & abuse testing.


Spare Teflon Tape

Power adapter

Foot-switch

Standards ASTM F963, EN 71-2, CFR 16 CFR

Power 220 /110 V 50/60 Hz

Weight 10 Kg


http://www.sdlatlas.com/results/?s=25&n=16%20CFR%20CPSC%20USA



TF515 Sharp Edge Tester

Keyword

Description Sharp Edge Tester, to determine whether accessible edges on toys or other products are likely to

cause injury. Sharp edge tester complies with ASTM F963, EN 71-2, CFR 16 CFR, etc.

TU250 Universal Materials Testing Machine

Application

Universal Materials Testing Machine, available with single and dual

column frame with capacities of 250kgf, 500kgf, 1000kgf, 3000kg

(500lbf, 1000lbf, 2000lbf, 6,000lbf) and include two model types, the M

series and the P series. These machines are designed to test a wide

range of materials in tension, compression, flexure, shear and peel.

M Series

Using a combination of quality engineering and advanced technology,

TESTEX offers a series of machines that are accurate and simple to

use. All M series machines feature an easy-to-read LCD. All data shown

on this display is obtained in real time. The control unit features

dedicated keys for moving the crosshead up, down, stop, performing the

test as well as keys for load and extension tare and crosshead return.

The control panel also features an alpha-numeric keypad to allow the

input of test conditions, test data and the formatting of the test report.

The control unit can retain up to five separate test routines for easy and

rapid recall.

Powerful as stand-alone units, the machine capability is enhanced by

direct connection of a printer through which comprehensive test reports

and high resolution graphs can be quickly obtained. All data on the

backlit LCD display will be shown in English.

LCD, quality motor, micro-computer controlled.

P Series

PC-controlled with Panasonnic AC servo motor and two quality

ball-screws for ideal and smooth control.

Building on the quality and technology that is built into the M series,

TESTEX offers the P series of machines to complement the popular and

successful M series. The P series models have similar specifications to

the M series, but they talk directly with a standard PC running a data

analysis software package in English or Chinese, via a high speed

RS232 in both ASCII and super high speed binary modes.

The M and P series use quality load-cells with an accuracy of 0.5% of

the applied load value, from 2% to 100% of the load-cell capacity.

The M and P series have a huge assortment of specimen grips and

fixtures available, allowing the selection of an ideal grip for your

application.

Specifications

PC control and specified Textile Tensile Testing

Software via high speed RS232

Model Capacity Column Control

TU250M 250kgf Single LCD Panel

TU250P 250kgf Single PC with

http://www.sdlatlas.com/results/?s=2&n=F963

http://www.sdlatlas.com/results/?s=2&n=F963

Universal Materials Testing Machine

Universal Materials Testing Machine, available with single and dual column frame with capacities from 250 to 3000kgf.

These machines are designed to test a wide range of materials in tension, compression, flexure, shear and peel, etc.

TU250

Textile Tensile Testing Machine

Textile Tensile Testing Machine, available with single and dual column frame with capacities from 250 to 3000kgf,

designed to test a wide range of materials in tension, compression, flexure, shear and peel, etc, complies with ISO

13934 / 13935, ASTM D5034 / 5035, etc.

ISO 13934.1/2, ISO 13935.1/2, ISO 9073.3/4, ISO4606,

ASTM D76, ASTM D5034 / 5035, ASTM D2261 / D434 / D4964 / 5587 / D3936

GB/T 3923.1/2, GB/T 13772.1/2/3, GB 8687, FZ/T 20019 / 70006 / 70007/ 01085 / 01030, JIS L1093, BS, DIN

Test space: Wight 400mm x Height 900 mm

Load measurement accuracy: +/-0.5% (2%-100%FS),

+/-1% (1%-100%FS)

Resolution of load: 1/10000FS

Displacement resolution and accuracy: 0.001mm,

+/-1% of indicated value.

Speed range and accuracy: 0.01 - 500mm/min, +/-1%

of set speed.

Built-in intelligent active force and displacement alarm

system.

32 bit precision motor controller.

Operating temperature range: 0 to 38 degrees C

Storage temperature range: -10 to 45 degrees C

Humidity range: 10% to 90% non-condensing, web

bulb method.

Power must be free of spikes and surges exceeding

10% of the nominal voltage.

Software

TU500M 500kgf Dual LCD Panel

TU500P 500kgf Dual PC with

Software



Software



Software

Standards

ISO 13934.1/2, ISO 13935.1/2, ISO 9073.3/4, ISO4606,


GB/T 3923.1/2, GB/T 13772.1/2/3, GB8687, FZ/T 20019 / 70006 / 70007/ 01085 / 01030,

JIS L1093, BS, DIN

Power 220 /110 V 50/60 Hz

Weight Single Column Type: 80 Kg / Dual Column Type: 175 Kg

Dimensions Single Column Type: 500x550x1400 mm / Dual Column Type: 700x500x1700 mm

(LxWxH)

TU250A Universal Material Testing Machine

Application

Universal Material Testing Machine, available with single and dual


(500lbf, 1000lbf, 2000lbf, 6,000lbf), are designed to test a wide range of

materials in tension, compression, flexure, shear and peel.

The tester is PC-controlled with VFC motor for ideal and smooth control

of speed from 5mm to 100mm/min.

The machine talk directly with a standard PC running a data analysis

software package in English or Chinese, via a high speed RS232 in

super high speed binary modes.

A huge assortment of specimen grips and fixtures are available, allowing

the selection of an ideal grip for your application.

Universal Material Testing Software is offered, a computer is required

(prepared by customer).

Specifications

PC control and specified Universal Material Testing Software via high speed RS232

PC closed-loop controls VFC motor and drives quality T-screw offers a wide range test speed.

Test space: Wigth 400mm x Height 800 mm

Load measurement accuracy: +/-0.5% (2%-100%FS), +/-1% (1%-100%FS)


Displacement resolution and accuracy: 0.1mm, +/-1% of indicated value.

Speed range and accuracy: 50 - 300mm/min, +/-1% of set speed.

Top and bottom overrun protection.



Humidity range: 10% to 90% non-condensing, web bulb method.

Power must be free of spikes and surges exceeding 10% of the nominal voltage.

Standards

ISO 13934.1/2, ISO 13935.1/2, ISO 9073.3/4, ISO4606,


GB/T 3923.1/2, GB/T 13772.1/2/3, GB8687, FZ/T 20019 / 70006 / 70007/ 01085 / 01030,

JIS L1093, BS, DIN

Power 220 /110 V 50/60 Hz

Weight 100 Kg

Dimensions 550 x 500 x 1400 mm

TU250PT Textile Tensile Testing Machine

Application

Textile Tensile Testing Machine is designed to test a wide range of

materials in tension, tear, elongation set, constant load, elastic, thread

slip, peeling and other mechanical properties.

P Series

PC-controlled machine equipped with AC servo motor and a quality

ball-screw for ideal and smooth control. Machine talks directly with a

standard PC running a data analysis software package in English or

Chinese, via a high speed RS232 in both ASCII and super high speed

binary modes.

Equipped with a quality load-cell with an accuracy of 0.2% of the applied

load value, from 2% to 100% of the load-cell capacity.

The machine has a huge assortment of specimen grips and fixtures

available, allowing the selection of an ideal grip for your application.

Especially, two pins, one auxiliary metal clamp, Grab test and Modified

grab test fixtures are included for Textile Fabrics test (ASTM D5034 /

D5035).

Specifications

PC controlled, high-resolution digital closed-loop controller controls Ac servo motor drives quality Ball-screw,

offers a accurate and smooth running.

High speed RS232 connects computer and machine, controlled by a special Textile Tensile Testing Software


Load measurement accuracy: +/-0.2% (2%-100%FS)

Resolution of load: 0.1N

Displacement resolution and accuracy: 0.01mm.

Speed range and accuracy: 0.1 - 1000mm/min, error ≤ ± 2%

Built-in intelligent active force and displacement alarm system.

High-resolution digital closed-loop controller





Standards

ISO 13934.1/2, ISO 13935.1/2, ISO 13936-2, ISO 13937-2, ISO 9073.3/4, ISO4606, ISO

1798, ASTM D76, ASTM D5034 / 5035, ASTM D2261 / D434 / D4964 / 5587 / D3936

GB/T 3923.1/2, GB/T 13772.1/2/3, GB8687, FZ/T 20019 / 70006 / 70007/ 01085 / 01030,

JIS L1093, BS, DIN

Power 220 /110 V 50/60 Hz

Weight 60 Kg

Dimensions 500 x 630 x 1200 mm

TU250M Universal Material Testing Machine

Application

Universal Material Testing Machine, available with single and dual


(500lbf, 1000lbf, 2000lbf, 6,000lbf) and include two model types, the M

series and the P series. These machines are designed to test a wide

range of materials in tension, compression, flexure, shear and peel.



application.

Especially, two pins, one auxiliary metal clamp, Grab test and Modified

grab test fixtures are included for Textile Fabrics test (ASTM D5034 /

D5035).

M Series

Using a combination of quality engineering and advanced technology, TESTEX offers a series of machines that are

accurate and simple to use. All M series machines feature an easy-to-read LCD. All data shown on this display is

obtained in real time. The control unit features dedicated keys for moving the crosshead up, down, stop, performing

the test as well as keys for load and extension tare and crosshead return. The control panel also features an

alpha-numeric keypad to allow the input of test conditions, test data and the formatting of the test report. The control

unit can retain up to five separate test routines for easy and rapid recall.

Powerful as stand-alone units, the machine capability is enhanced by direct connection of a printer through which

comprehensive test reports and high resolution graphs can be quickly obtained. All data on the backlit LCD display

will be shown in English.

Specifications

Single column, 2 load cells of 250kgf and 50kgf are offered covering the range from 7.5kgf to 210kgf.

One set of Grab test fixture and 1 set of Bursting strength rig are included.

LCD displays displacement, force, speed, and other information.

Micro-computer controls quality motor and screws




Speed range and accuracy: 50 - 300mm/min, +/-1% of set speed.

Stroke limit protection devices overload protection ensures safety of machine.





Standards

ISO 13934.1/2, ISO 13935.1/2, ISO 9073.3/4, ISO4606,


GB/T 3923.1/2, GB/T 13772.1/2/3, GB8687, FZ/T 20019 / 70006 / 70007/ 01085 / 01030,

JIS L1093, BS, DIN

Power 220 /110 V 50/60 Hz


Dimensions Single Column Type: 500x550x1400 mm / Dual Column Type: 700x500x1700 mm

(LxWxH)

TU250BM Fabric Ball-bursting Strength Tester

Application

Fabric Ball-bursting Strength Tester, used for testing the ball-bursting

strength and expansion rate of cotton fabrics, elastic fabrics, sock and

glove products.

Specifications

CRE principle, Micro-computer controls quality motor and screws

LCD displays displacement, force, speed, and other information.

Test range: 2500N

1 set of Ball-bursting Strength Test rig is included.


Load measurement accuracy: +/-0.5% (1%-100%FS)


Speed range: 50 - 300mm/min adjustable

Bursting ball: SΦ38mm & SΦ25mm (replaceable)

Clamp: Φ45mm

Stroke limit protection devices and overload protection ensures

safety of machine.

Standards

ISO 13934.1/2, ISO 13935.1/2, ISO 9073.3/4, ISO4606,

ASTM D3787, ASTM D6796, ASTM D76, ASTM D5034 / 5035, FZ/T01030, GB/T19976,

FZ/T 60019


Weight 80 Kg

Dimensions 500x550x1400 mm

TU1000PT Textile Tensile Testing Machine

Application

Textile Tensile Testing Machine, available with single and dual column

frame with capacities of 250kgf, 500kgf, 1000kgf, 3000kg (500lbf,

1000lbf, 2000lbf, 6,000lbf) and include two model types, the M series and

the P series. These machines are designed to test a wide range of

materials in tension, compression, flexure, shear and peel.

P Series









The M and P series use quality load-cells with an accuracy of 0.5% of the

applied load value, from 2% to 100% of the load-cell capacity.



application.

Specifications

PC control and specified Textile Tensile Testing Software via high speed RS232





Speed range and accuracy: 0.01 - 500mm/min, +/-1% of set speed.







Standards

ISO 13934.1/2, ISO 13935.1/2, ISO 13936-2, ISO 13937-2, ISO 9073.3/4, ISO4606,


GB/T 3923.1/2, GB/T 13772.1/2/3, GB8687, FZ/T 20019 / 70006 / 70007/ 01085 / 01030,

JIS L1093, BS, DIN

Power 220 /110 V 50/60 Hz


Dimensions Single Column Type: 500x550x1400 mm / Dual Column Type: 750 x 500 x 1500 mm

(LxWxH)

TU1000P Universal Tensile Testing Machine

Application

Textile Tensile Testing Machine, available with single and dual column

frame with capacities of 250kgf, 500kgf, 1000kgf, 3000kg (500lbf,

1000lbf, 2000lbf, 6,000lbf) and include two model types, the M series and

the P series. These machines are designed to test a wide range of yarn,

fabric, rubber, paper, and other materials in tension, compression,

flexure, shear and peel.

P Series









The M and P series use quality load-cells with an accuracy of 0.5% of the

applied load value, from 2% to 100% of the load-cell capacity.



application.

Specifications

PC control and professional Tensile Testing Software via high speed RS232

Equipped with 3 load cells: 10kN, 5kN, 100N.

Equipped with 3 sets of fixtures: Strip & Grab Test fixture, Bursting Strength Fixture, Compression Fixture

(specified)





Speed range and accuracy: 0.1 - 1000mm/min, +/-1% of set speed.







Standards

ISO 13934.1/2, ISO 13935.1/2, ISO 9073.3/4, ISO4606,


GB/T 3923.1/2, GB/T 13772.1/2/3, GB8687, FZ/T 20019 / 70006 / 70007/ 01085 / 01030,

JIS L1093, BS, DIN

Power 220 /110 V 50/60 Hz

Weight 150 Kg


TU340 Laboratory Conditioning Chamber

Application

Laboratory Conditioning Chamber is specially used to offer the standard

atmosphere for conditi oning, for determining the physical and

mechanical properties of textiles, and a standard alternative atmosphere

that used for other product samples such as paper, furniture, footwear,

etc. It can also be applied for Water Vapour Permeability Testing when

equipped with related kits.

Features

Liner material is high-quality SUS304 stainless steel plate.

Semi-Circular arc design, easy to clean.

The space between chamber’s shelf can be adjustable.

Microcomputer temperature and humidity controller, high accuracy.

Temperature alarm system, temperature over the restricted will

abort automatically.

Dia.25mm test hole in the left of chamber.

Specifications

Textile Standard Atmosphere: Temp. 20℃, R.H. 65%

Textile Standard Alternative Atmosphere: 23℃, R.H. 50%

Test space: 500 x 400 x 550mm (110L)

Temperature range: -10℃ ~ 85℃

Temperature accuracy: +/- 0.5℃(high-temp), +/- 1.0℃(low-temp.)

Temperature resolution: 0.1℃

Humidity range: 45% ~ 95%RH

Humidity accuracy: +/- 3%RH

Ambient Temperature: +5 ~ 30℃

Standards

ISO 139, GB 6529, ISO 2528, ASTM E96, ASTM

D1653, ASTM D1776, BS 7209, BS 3424, JIS Z0208,

GB 1037

Power 220 /110 V 50/60 Hz 1.8kW

Weight 150 Kg


TU600 Precision Torsion Balance

Application

Precision Torsion Balance ideal for the weighing of small quantities of

fibres or tufts. Equipped with analogical quadrant.

250° scale x 500 divisions. Ranges from 0-5 mg x 0.01 mg to 0-1000 mg

x 2.0 mg.

Specifications

0-5 mg, accuracy 0.01 mg

0-10 mg -accuracy 0.02

0-25 mg -accuracy 0.05

0-50 mg -accuracy 0.10 mg



0-500 mg -accuracy 1 mg

0-1000 mg - accuracy 2 mg

Weight 5 Kg


Documents

TF110A Crease Recovery Tester - iron separator