Orders: 800-741-0015 - Sinclair International

PAGE 1Orders: 800-741-0015order on the web

brownells.com

UP

PE

R R

EC

EIV

ER

SA

R-15

/M16

AR-15/M16 INDEXAccessory Mounts . . . . . . . . . . . . . . . 94-95 Retro Rifle™ Parts . . . . . . . . . . . . . . . . .10-15

Barrels . . . . . . . . . . . . . . . . . . . . . . . . . . 23-28 Pistol Grips . . . . . . . . . . . . . . . . . . . . . . .64-66

Bolt & Mag Releases . . . . . . . . . . . . . . 43-44 Range & Training Gear . . . . . . . . . . . . 80-81

Bolts & Carriers . . . . . . . . . . . . . . . . . . .16-19 Recoil Buffers . . . . . . . . . . . . . . . . . . . 40-41

Caliber Conversions . . . . . . . . . . . . . . . . . . 16 Safety Selectors . . . . . . . . . . . . . . . . . 44-45

Charging Handles . . . . . . . . . . . . . . . . 41-43 Sights . . . . . . . . . . . . . . . . . . . . . . . . . . .72-76

Cleaning Supplies . . . . . . . . . . . . . . . . 81-84 Slings & Adapters . . . . . . . . . . . . . . . . 76-80

Comps/Flash Hiders . . . . . . . . . . . . . . 28-33 Small Parts & Kits . . . . . . . . . . . . . . . . . 45-50

Gas System Components . . . . . . . . . .19-23 Springs . . . . . . . . . . . . . . . . . . . . . . . . . 38-39

Gunsmithing Tools . . . . . . . . . . . . . . . 84-94 Stocks . . . . . . . . . . . . . . . . . . . . . . . . . . 50-56

Handguards . . . . . . . . . . . . . . . . . . . . . 57-64 Triggerguards . . . . . . . . . . . . . . . . . . . 37-38

Lower Receivers . . . . . . . . . . . . . . . . . 7-10, 11 Triggers . . . . . . . . . . . . . . . . . . . . . . . . 33-37

Magazines & Parts . . . . . . . . . . . . . . . . 67-70 Upper Receivers . . . . . . . . . . . . . . . 1-7, 10, 11

Magazine Accessories . . . . . . . . . . . . 70-72 Vertical Grips . . . . . . . . . . . . . . . . . . . . 66-67

Optic Mounts . . . . . . . . . . . . . . . . . . . 95-98

Flattop upper re-ceiver is configured for fast, easy attachment of Aero's proprietary M4E1 free-float hand-

guard . Just slip the handguard on the front of the receiver and tight-en the screws . It's that easy to swap from a short to long handguard! Upper has M4 feed ramps to aide in reliable feeding . T-marked for rap-

id mounting/dismounting of optics and sights . Includes the nut and wrench . Handguard has Picatinny top rail that aligns continuously with receiver rail to give ample space for optics and sights . Available with either KeyMod or Magpul® M-LokTM easy-on/off accessory at-tachment system . Designed for use with low-profile gas blocks . abSPECS: Receiver and handguards are sold separately. Upper Receiver - 7075 T6 aluminum. .250" dia. pivot/takedown pin holes. Handguard - 6061 T6 aluminum. Both hardcoat anodized with matte black finish.

AERO PRECISION AR-15/M16

M4E1 ENHANCED UPPER RECEIVER/HANDGUARD SYSTEM

Swap Handguards & Change Accessory Configurations In

Seconds

#100-015-499AV M4E1 Upper Receiver, 3E110J00 � � � �$ 119.20#100-015-528AV Enhanced M-Lok Handguard, 15",

3E169G99 � � � � � � � � � � � � � � � � � � � � � � � � � 169.99#100-015-529AV Enhanced KeyMod Handguard, 12",

3E119A99 � � � � � � � � � � � � � � � � � � � � � � � � � � 119.99#100-015-541AV Enhanced KeyMod Handguard, 15",

3E169J99 � � � � � � � � � � � � � � � � � � � � � � � � � � 169.99

The Aero Precision upper is forged from 7075 aluminum for superior strength and given a super tough, Type 3 hardcoat anodized finish for excellent resistance to sur-face wear . It features M4-type feed cuts inside for reliable feeding and laser-engraved T-marks on the Picatinny rail (black anodized models only) . Compatible with standard, mil-spec AR lowers and com-ponents . A really high-quality receiver at a great price! Smooth-Side model eliminates the forward assist, reducing the risk of snagging on other gear and giving your rifle a clean, streamlined appearance . Not Quite Stripped - Standard model also available with forward assist and ejection port cover installed . abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Also avail-able with a tough, non-reflective Cerakote finish in Desert Tan (DT), Flat Dark Earth (FDE), or O.D. Green (ODG). Cerakote-finished models do not have T-marks. All models use .250" pivot and takedown pins.


STRIPPED UPPER RECEIVEREconomical Yet

High-Quality Upper For Your Custom Build

#100-010-612AV Stripped Upper Receiver, Black, 3E65B53 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99

#100-013-288AV Stripped Upper Receiver, DT Cerakote, 3E78N60 � � � � � � � � � � � � � � � � � � � � � � � � � � 83.99

#100-018-688AV Stripped Upper Receiver, ODG Cerakote, 3E80Q22 � � � � � � � � � � � � � � � � 83.99

#953-000-017AV Upper Receiver w/Fwd Assist & Cover, Black, 3E75E79 � � � � � � � � � � � � � � � � � � � � 79.99

#100-018-687AV Upper Receiver w/Fwd Assist & Cover, FDE Cerakote, 3E93N57 � � � � � � � � � � � � 100.00

#100-014-637AV Smooth-Side Upper Receiver, Black, 3E78Q60 � � � � � � � � � � � � � � � � � � � � � � � � � � 83.99

Smooth Side

Fwd Assist & Cover Installed

Aero Precision’s M4E1 receiver gives you the best of two worlds: the badass looks and robustness of a billet receiver, plus the easy parts compatibility (and price!) of a traditional mil-spec upper . And it comes with two nit-picky jobs done for you: the forward assist and ejection port cover are already installed . But there’s more . . . Unlike Aero's M4E1 Enhanced upper, this M4E1 model has standard bar-rel threads up front so it can accept a standard AR-15 barrel nut and handguard attachment . The original M4E1 upper is configured for the proprietary attachment system of Aero's Gen2 Enhanced or Atlas 'guards . The version offered here gives you all the M4E1 upper features AND lets you build your rifle with a different handguard . Ready to serve as the foundation of an exciting custom AR-15, it's forged from 7075 T6 aluminum, like a regular mil-spec receiver, but with angular external contours that add the strength - and custom look - of a "billet" receiver . Accepts any mil-spec AR-15 bolt/carrier group (not included) and fits on a standard AR-15 lower - though it looks darned good paired up with Aero’s equally rugged, all-busi-ness M4E1 forged lower receiver . Stripped model - bare receiver, NO forward assist or ejection port cover . ab

AERO PRECISION AR-15

M4E1 GEN2 THREADED UPPER RECEIVER

The Enhanced Strength & Looks of Billet -

Accepts Standard Mil-Spec Parts & Accessories

#100-026-238AV Assembled AR-15 Gen2 Upper Receiver, 3E99P10 � � � � � � � � � � � � � � � � � $ 99.99

#100-026-237AV Stripped AR-15 Gen2 Upper Receiver, 3E78E57 � � � � � � � � � � � � � � � � � � � � � � � � � � � 83.99

Aero Precision’s basic AR-15 upper receiver closely resembles the U .S . military’s M16A4 flattop upper - and it comes fully assem-bled . It lacks only a bolt/carrier group and charging handle, two components many AR-15 fans prefer to customize based on their needs (this is America darn it, we have freedom of choice!) . These are mil-spec forged 7075 T6 aluminum receivers, with a military hardcoat anodized finish in matte black . They feature a barrel of high-grade 4150 chrome-moly carbon steel with 1-7" rifling and a tough, corrosion- and scratch-resistant black QPQ finish . Chamber accepts both military 5 .56mm NATO and civilian .223 Remington ammo . There’s a GI-style plastic A2 handguard, A2 front sight tower, and A2 "birdcage" flash suppressor . Carbine model has 16" barrel and is available with the standard carbine-length (CL) gas tube OR a longer mid-length tube (ML) that slows gas velocity for enhnaced cycling reliability . Rifle model comes outfitted with a detachable A2-style carry handle, so you can go Old School whenever you like, and a Picatinny top rail for mounting an optic . The 20" barrel and rifle-length gas tube (RL) help you reach out accurately to distant targets . Remember: the bolt/carrier group and charging handle are NOT included . ab


COMPLETE STANDARD UPPER RECEIVERS

Classic Rifle & Carbine Uppers That Get the Job Done

16" Carbine

#100-025-501AV Assembled AR-15 Upper, 16" Bbl/CL, 3E00JYS � � � � � � � � � � � � � � � � � � � � � � � � � � $ 288.99

#100-025-502AV Assembled AR-15 Upper, 16" Bbl/ML, 3E297G99 � � � � � � � � � � � � � � � � � � � � � � � � 297.99

#100-025-500AV Assembled AR-15 Upper, 20" Bbl/RL, 3E443P99 � � � � � � � � � � � � � � � � � � � � � � � � 443.99

20" Rifle

Aero Precision’s M4E1 uppers come fully assembled, minus only the bolt/carrier group and charging handle - the two components any AR-15 fan with even a little urge to customize want to replace anyway . The M4E1 combines the unique look of a custom billet receiver with the affordability and "mil-spec" parts compatibility of a forged receiver . It comes with Aero Precision’s latest Gen 2 Enhanced M-LOK handguard installed . Receiver and handguard form a solid, monolithic accessory mounting platform, while the full-length Picatinny top rail runs from the rear of the receiver across the entire length of the " handguard, which has plenty of M-LOK ac-cessory attachment slots and QD sling swivel sockets at the 3/6/9 o’clock positions . Texture milled into the flats give you a better grip and add to your gun's unique appearance . If you can’t mount each of your accessories on your M4E1 upper in the exact perfect spot, at least you know the quest is over - you won’t find one that’s better!

Forged 7075 T6 aluminum receiver, Mil 8625 Type 3 Class 2 hardcoat anodized . .250" dia . pivot/takedown pin holes . Ejection port cover and forward assist installed . 4150 chrome-moly-vana-dium barrel, 1-7" rifling, black QPQ finish . PL = pistol length, CL = carbine length, ML = mid-length, RL = rifle length . HG = handguard . FSB = A2-style gas block/front sight base, Lo-Pro = low-profile gas block under handguard . ab


ASSEMBLED M4E1 GEN2 UPPER RECEIVER

Tactical Uppers With Acres of Accessory-Mounting Real Estate

#100-025-503AV M4E1 Gen2 5.56 Upper, 7 .5" Bbl/PL/7" HG/Lo-Pro, 3E359G99 � � � � � � � � � � � � $ 359.99

#100-025-504AV M4E1 Gen2 5.56 Upper, 10 .5" Bbl/CL/7" HG/FSB, 3E379F99� � � � � � � � � � � 379.99

#100-025-505AV M4E1 Gen2 5.56 Upper, 10 .5" Bbl/CL/9" HG/FSB, 3E374E99 � � � � � � � � � � 374.99

#100-025-506AV M4E1 Gen2 5.56 Upper, 14 .5" Bbl/ML/12" HG/Lo-Pro, 3E00FWQ � � � � � � 382.50

#100-025-507AV M4E1 Gen2 5.56 Upper, 14 .7" Pencil Bbl/ML/12" HG/Lo-Pro, 3E00GPA � � � 387.00

#100-025-508AV M4E1 Gen2 5.56 Upper, 16" Bbl/CL/15" HG/Lo-Pro, 3E390N99 � � � � � � 390.99

#100-025-509AV M4E1 Gen2 5.56 Upper, 16" Bbl/ML/15" HG/Lo-Pro, 3E390F99 � � � � � � 390.99

#100-025-510AV M4E1 Gen2 5.56 Upper, 16" Pencil Bbl/ML/15" HG/Lo-Pro, 3E00BQS � � � 394.99

#100-025-511AV M4E1 Gen2 5.56 Upper, 18" Bbl/RL/15" HG/Lo-Pro, 3E408J99 � � � � � � 408.99

#100-025-512AV M4E1 Gen2 300 BLK Upper, 8" Bbl/PL/8" HG/Lo-Pro, 3E403E99 � � � � � � � 403.99

#100-025-513AV M4E1 Gen2 300 BLK Upper, 10" Bbl/PL/9" HG/Lo-Pro, 3E421M99 � � � � � � � 421.99

#100-025-514AV M4E1 Gen2 300 BLK Upper, 16" Bbl/PL/15" HG/Lo-Pro, 3E00AHR � � � � � � � 430.99

#100-025-515AV M4E1 Gen2 .223 Wylde Upper, 16" Bbl/ML/15" HG, 3E00KAI � � � � � � � � � � � 412.99

#100-025-516AV M4E1 Gen2 .223 Wylde Upper, 18" Bbl/RL/15" HG, 3E421C99 � � � � � � � � � � 421.99

AR

-15

/M16

PAGE 2 Office/Tech: 641-623-5401GUARANTEED. FOREVER.®

SINCE 1939

UP

PE

R R

EC

EIV

ER

S

Forged aluminum flattop receiver includes fully-assembled forward assist and ejection port cover and accepts barrels with M4 barrel extensions . All final di-mensions machined to correct mil-spec tolerances to readily ac-cept standard AR-15 parts to help you complete an upper receiver . Laser-etched T-marks on Picatinny rail enable easy removal and re-mounting of optics, sights, and other accessories in the correct position . Interior has dry film lubrication to help reduce wear . NOTE: The inside diameter for the barrel extension is slightly undersized to help you achieve a tight barrel fit for a more accurate rifle . If you have trouble inserting the barrel extension, use a hair dryer to warm up the threaded bore of the receiver . abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black. .250" (6.3mm) pivot/takedown pin holes.

BRAVO COMPANY AR-15/M16

M4 UPPER RECEIVER Precise Dimensions Give

Proper Fit & Function

#100-014-626AV M4 Flattop Upper, 1E113P82 � � � � � � � $ 119.00

This M4A3 flattop carbine upper comes fully assembled and ready to snap onto any standard AR-15 lower receiver . Comes with a detachable carry handle with A2 rear sight, so if you don't mind shooting with "iron" sights, just add a magazine, ammo, "ears" and "eyes" - and hit the range . This complete package includes a forged upper receiver with the following components installed: bolt/car-rier group, M4-style plastic handguard, charging handle, gas block/front sight tower, and A2 flash suppressor . Inside of receiver is cut with M4-type feed ramps to aid in reliable round feeding . M4-style 16" barrel is chrome-lined for corrosion- and wear-resistance, with versatile 1-9" twist rifling to stabilize a variety of bullet weights . Bolt/carrier group a matte black phosphate finish; bolt is magnetic par-ticle inspected (MPI) for hidden flaws . Carrier is chrome-lined, just like the barrel, to resist blast erosion . abSPECS: Receiver - Forged 7075 T6 aluminum, hardcoat anodized, matte black finish. .250" dia. pivot/takedown pin holes. Barrel - 4150 chrome-moly steel, chrome-lined, with matte black phosphate finish. 1-9" rifling. .750" O.D. at gas port. 1/2"-28 tpi muzzle threads.

Complete, Full-Featured Upper Is Ready To "Plug-n-Play"

#100-017-384AV Complete AR-15 Upper, 16" Bbl, 9B505B33 � � � � � � � � � � � � � � � � � � � � � � � � $ 562.99

BUSHMASTER AR-15/M16

M4A3-STYLE CARBINE UPPER RECEIVER

Aero Precision’s M5E1 AR-style upper is ready to be the founda-tion of a lightweight, tack-driving target rifle . Chambered for the inherently accurate 6 .5mm Creedmoor cartridge that’s taking the long-range target shooting community by storm, the M5E1 fits DPMS GEN 1 LR-308 lower receivers and clones, and it accepts the DPMS-compatible bolt/carrier group and charging handle of your choice . The BCG and charger are omitted because . . . so many target shooters prefer to select them separately . (No need to pay for parts you’re going to replace, right?) Each receiver comes with a high-quality 416R stainless steel target barrel with a 1-8" twist to stabilize a variety of popular target bullets . An extra-length gas system slows gas velocity for gentler, more reliable cycling and reduced wear on the gas block, BCG, and receiver . Available with an 18" barrel and a MID-LENGTH (ML) gas system; or choose a 20" or 22" barrel for extra bullet velocity and RIFLE-LENGTH (RL) gas system . Forged 7075 T6 aluminum receiver, hardcoat anodized matte black . Ejec-tion port cover and forward assist installed . Comes with Aero Preci-sion’s Gen 2 Enhanced M-LOK handguard with an uninterrupted, gap-free, full-length Picatinny top rail that runs from the rear of the receiver across the entire length of the handguard . There are plenty of M-LOK accessory attachment slots and QD sling swivel sockets at the 3/6/9 o’clock positions . Texture milled into the flats gives you a secure hold and adds to your gun’s unique appearance . The result: a laser-accurate target rifle with a rock-solid accessory mounting platform . ab

AERO PRECISION

ASSEMBLED M5E1 6.5 CREEDMOOR UPPER RECEIVER

Feature-Laden Upper for a "Boringly Accurate" Target Rifle

#100-025-517AV M5E1 Gen2 Upper Rec'r, 18" Bbl/ML Gas, 3E578I99 � � � � � � � � � � � � � � � � � � � � $ 578.99

#100-025-518AV M5E1 Gen2 Upper Rec'r, 20" Bbl/RL Gas, 3E587E99� � � � � � � � � � � � � � � � � � � � 587.99

#100-025-519AV M5E1 Gen2 Upper Rec'r, 22" Bbl/RL Gas, 3E596P99 � � � � � � � � � � � � � � � � � � � 596.99

Forged aluminum flattop upper receiver is fully compat-ible with DPMS LR-308 com-

ponents, making it a solid, versatile foundation for your next big bore AR build . Final machined to Aero Precision’s precise specifica-tions, it features M4-style feed ramps to aid in reliable feeding of all types of 7 .62/ .308 ammo . DPMS-pattern takedown holes ( .2795") allow for compatibility with a variety of lower receivers, especially Aero Precision’s matched M5 lower . Picatinny-cut accessory rail on top is T-marked . Available with forward assist and ejection port cover installed OR totally stripped . Works with DPMS high-profile handguards . abSPECS: 7075 T6 aluminum, MIL 8625 Type 3 Class 2 harcdcoat anodized, matte black. .2795" dia. pivot and takedown pin holes.


M5 UPPER RECEIVERPerfect Match For Aero M5

Lower; Forward Assist & Port Cover Pre-Installed

#100-015-987AV M5 .308 Upper Receiver w/Fwd Asst & Cover, 3E112H91 � � � � � � � � � � � � � � � � � $ 131.75

#100-026-654AV Stripped M5 .308 Upper Receiver, 3E112N86 � � � � � � � � � � � � � � � � � � � � � � � � � 114.75

Matched receiver set is the bedrock for your AR pistol . The upper and lower receivers are machined from 7075-T6 billet aluminum and feature standard AR-15 controls and accept most aftermarket Mil-Spec components . Accepts all after-market Glock® 9mm double stack magazines . It is recommended to use factory Glock® magazines . The slick side upper receiver features an appropriately sized ejection port and no forward assist . The re-ceiver set can be completed with standard mil-spec components . Lower receiver accepts 9mm, .40 S&W and .357 SIG GLOCK® maga-zines . Integrated, oversized triggerguard . 7075-T6 billet aluminum lower receiver with a matte black hard-coat anodized finish . 7075-T6 billet aluminum slick side upper receiver with appropriately sized ejection port and no forward assist or dust cover . For use with a 9mm bolt carrier assembly and a standard AR-15 hammer . To aid in reloads, the Angstadt Arms 0940 matched receiver features an integrated oversized magazine release, flared magazine well and patent pending last round bolt hold open design which locks the bolt open on an empty magazine . ab

ANGSTADT ARMS AR-15

9MM UPPER/LOWER RECEIVERSThe Bedrock of Your AR Pistol

#100-024-770AV 9mm Lower Receiver for Glock® Mags, 8B216A77 � � � � � � � � � � � � � � � � � � $ 289.99

#100-024-771AV 9mm Receiver Set for Glock® Mags, 8B361C29 � � � � � � � � � � � � � � � � � � � � � � � � 409.99

#100-024-772AV 9mm Upper Receiver for Glock® Mags, 8B180I08 � � � � � � � � � � � � � � � � � � 225.99

#100-014-464AV Side Charger Upper Rec'r, 1K311J63 � � $ 360.99

Charging handle on the left side allows the shooter to maintain sight picture and shooting position while charg-ing the chamber . Eliminates the difficulty of reaching around objectives on large optics to access the traditional rear-mounted charging handle . Oversized handle is easy to grab, and folds down along the receiver when not in use . Machined from a solid block of 7075 aluminum, this flattop up-per features an integral 5½" MIL-STD 1913 rail and M4-type feed ramps . Compatible with all chamberings that fit the standard AR-15 platform, including gas piston systems, except .22 conversion kits . Requires side charging bolt carrier with correct machined notch (not included) . abSPECS: Machined 7075 aluminum, hardcoat anodized, matte black. .250" dia. pivot/takedown pin holes.

Easy-Access Charging Handle Won’t Interfere With Large

Optics

AMERICAN SPIRIT ARMS

SIDE CHARGER UPPER RECEIVER

Our BRN-180™ upper is inspired by the Armalite® AR-180 rifle of the 1960s . The AR-180 was a civilianized semi-auto version of the AR-18, itself an upgrade on the M16 . Gas piston reliability. The BRN-180 upper incorporates many of the AR-18/AR-180 improve-ments - including its robust gas piston operating system (yes, the originators of the AR-15/M16 eventually embraced a piston) . The BRN-180™ bolt carrier rides smoothly on a PAIR of guide rods . The carrier is buffered at the rear by a built-in polymer buffer with a molded-in steel plate that captures the guide rods . More noticeable to the shooter is the charging handle located on the forward LEFT side of the receiver . Folding stock friendly. The BRN-180 is ideal for use with a folding stock because it has no AR-15 type buffer system or buffer tube extending behind the receiver . You can easily fire the rifle with the stock folded . Versatile & compatible. The BRN-180™ is fully compatible with any standard, mil-spec AR-15 lower receiver . The 16" barrel is forged from extra-strong 4150 carbon steel, with a hard Nitride finish that really resists surface wear . It's chambered in .223 Wylde, with 1-8" rifling, so it handles both .223 Remington and military-type 5 .56mm NATO ammo equally well . Up front there's a replica of the AR-180's unusual three-prong flash hider, with a solid hemispherical bottom prong that prevents a dust signature when shooting prone . Standard ½-28 tpi muzzle threads let you swap on a modern AR-15 muzzle device if you're bitten by the customizing bug . Innovation without complexity. Also brought over from the AR-180 is the ease of removing the BRN-180's free-floating hand-guard . The recoil guide rods inside engage the U-clip that retains the handguard . Remove the bolt carrier, pull the guide rods the rear, and pull down the U-clip to release the 'guard . The handguard has rows of M-LOK® slots and a full length MIL-STD 1913 Picatinny top rail that lines up seamlessly with the receiver rail . Both components are machined from extra-strong 7075 T6 aluminum and given a tough hardcoat anodized finish . The BRN-180™ delivers a unique combi-nation of "Retro" nostalgia and a robust, reliable, AR-15 platform with the latest 21st Century upgrades . It's proof that when you wait long enough, the old truly does become new again! ab#078-000-483AV BRN-180 Upper, 16" Bbl, 8G799F00 � �$ 799.00

Update of an Innovative 1960s Design That's Totally Cutting Edge

Our exclusive KeyMod uppers come fully assembled and ready to snap onto the standard mil-spec AR-15 lower of your choice . The A3-type flattop receiver is mated to a sturdy machined aluminum handguard with rows of KeyMod slots at the 3, 6 and 9 o'clock po-sitions to give you plenty of space for mounting accessories . The T-marked Picatinny receiver rail continues right across the entire top of the handguard . Free-floated barrel has a Parkerized finish, with a low-profile gas block and a classic A2-style flash hider up front . "Almost complete" models come without charging handle and bolt/carrier group, so you can choose the exact components that suit your needs . Available chambered in 5.56 NATO ( .223 Rem) and .300 AAC Blackout (300 BLK) . Gas systems: CL = carbine length; PL = pistol length . ab

AR-15

COMPLETE/ALMOST COMPLETE" UPPER RECEIVERS

Fully Assembled, Ready for a Lower

#100-023-019AV Almost Compl. 5.56 Upper, 16"/CL, 3E279A99 � � � � � � � � � � � � � � � � � � � � � � � � $ 289.99

#100-023-018AV Complete 300 BLK Upper, 16"/PL, 3E411H99 � � � � � � � � � � � � � � � � � � � � � � � � 425.99

#100-023-020AV Almost Compl. 300 BLK Upper, 16"/PL, 3E274E99 � � � � � � � � � � � � � � � � � � � � � 284.99

#100-023-086AV Complete 5.56 Pistol Upper, 11 .5"/CL, 3E427C99 � � � � � � � � � � � � � � � � � � � � � � � � 443.99

BRN-180STM - Short-barreled version of the BRN-180TM for use in pistol and SBR builds . Aside from its 10 .5" barrel, the 180S has an adjustable-flow gas block to help preserve reliability, which can be compromised in short-barreled configurations . Gas flow can be adjusted by turning the knob on the front of the gas block, so you can easily switch be-tween optimal flow for suppressed and unsuppressed operation . When set for suppressed fire, gas to the front to ensure smooth cycling and to keep excess gas from being blow back at you . All NFA rules apply. #078-000-537AV BRN-180S Upper Receiver, 10 .5" Bbl,

8G00CXR � � � � � � � � � � � � � � � � � � � � � � � � $ 799.00

AR-15

BRN-180™ UPPER RECEIVER

Sometimes you want the lat-est, updated, tweaked component, and sometimes you need a basic stripped receiver where the pro-duction effort goes into quality, rather than bells and whistles . Our stripped M4 upper is that component - the perfect starting point for many an AR-15 build . Starting with a 7075 T6 aluminum forging, our stripped M4 flattop upper is precision machined to final dimensions

AR-15/M16

STRIPPED M4 UPPER RECEIVERA Solid Foundation for

Your Next Custom Build

#078-000-371AV Stripped M4 Upper Rec'r, 8G49D99 � �$ 59.99

that make it compatible with the multitude of available "mil-spec" AR-15 components . It has a matte black, Type III hardcoat anodized finish, mirroring the military requirement . Standard .250" dia . pivot/takedown pin holes . T-marked Picatinny top rail . Inside, our upper features M4 feed ramps to aid in chambering during high rates of fire . And outside the T-marks in the Picatinny rail’s slots are engraved AND painted to aid in fast exchanges of optics . Note: This is a truly stripped upper receiver, with NO forward assist or ejection port cov-er installed, so you can truly customize every aspect of your rifle . ab

AR

-15/M

16


brownells.com

UP

PE

R R

EC

EIV

ER

S

Stripped flattop upper has expand-ed ejection port to enable reliable ejec-tion .458 SOCOM and other big-bore

AR-15 cartridges . Machined from high-grade 7075 billet aluminum with M4 feed ramp cuts and thicker walls for the extra strength to handle harder-hitting cartridges . Fits any standard mil-spec lower, while slick-side configuration simplifies your build by eliminating provisions to accept dust cover or forward assist . Topside Picatinny rail has engraved T-numbers that are left unpainted to reduce dis-tractions . Accepts standard bolt carrier, charging handle, and barrel nut, sold separately . abSPECS: Machined 7075 T6 billet aluminum, hardcoat anodized, matte black finish.

Optimized For Large-Caliber AR Cartridges

#100-015-679AV .458 SOCOM Billet Upper, 5H111E46 � �$ 115.99

CROSS MACHINE TOOL AR-15/M16

.458 SOCOM BILLET UPPER

Chambered for 5 .56 NATO . The DDM4v7 Upper Receiver fea-tures M-LOK attachment technology in the MFR XS 15" rail . The mid-length gas system provides smooth and reliable cycling under any condition and reduces both perceived recoil and wear on moving parts . The DDM4v7 also features a machined 7075-T6 aluminum upper receiver with M4 feed ramps and a 16" Chrome Moly hammer forged steel, 1-7 twist government profile barrel . Threaded muzzle: 1/2-28 TPI threads . Low Profile Gas Block utilizes the Mid-Length Gas System . Daniel Defense 17-4 PH Stainless Steel Flash Hider . M16 Mil-Spec Chrome Lined Bolt Carrier Group

MFR XS M-LOK Handguard . DDM4v7 Pro Series Upper is built around DD's newest 18" Strength-to-Weight (S2W), cold hammer forged barrel, this platform delivers the speed, controllability, and precision required to engage the courses most difficult stages . The DDM4v7 Pro Series Upper Receiver is hard coat anodized Mil-Spec aluminum with M4 feed ramps and a hammer forged chrome moly 18" barrel with a 1-7 twist S2W™ profile . The Daniel Defense DDM4v7 Pro Series Upper Receiver is chambered in 5 .56 NATO and delivers the performance we’ve come to expect from the DDM4v7 Series . ab

DANIEL DEFENSE AR-15

DDM4V7 UPPER RECEIVER

Delivers Speed, Controllability and Precision

#100-024-470AV DDM4v7 M-LOK Upper, 16" Bbl/MFR XS Rail, 8K964M25 � � � � � � � � � � � � � � � � $ 987.00

#100-024-471AV DDM4v7 Lightweight M-LOK Upper, 16" Bbl/15" MFR XS Rail, 8K964P25 � � � � � � � � � � � � � � � � � � � � � � � � 987.00

#100-024-472AV DDM4v7 Pro M-LOK Upper, 18" Bbl/ 15" MFR XS Rail, 8K1248P00 � � � � � � � � 1276.00

#100-024-480AV DDM4v7S Upper, 11 .5" Bbl/10" MFR XS Rail, 8K1072L00 � � � � � � � � � � � � � � � � 1096.00

For those looking to match the specs and performance of the M4A1 SOCOM Block II carbines used by troops during Operations Iraqi Freedom and Enduring Freedom, DD's Block II upper receiver is a great starting point . It features an aluminum handguard equipped with quad, full-length Picatinny rails . Receiver and handguard share the same flat dark earth anodized finish . The 16" barrel is constructed from mil-spec chrome-moly vanadium steel and features a standard Government profile (current SOCOM issue) with a chrome-lined bore and 1-7" rifling, matching military-style barrels with the same con-struction . Does not include BCG, charging handle or flash hider, so you can customize these components to your exact requirements . A mid-length gas tube slows gas velocity for more reliable cycling, and there's a low-profile gas block under the full-length handguard . The correct military-length 14 .5" barrel has a permanently welded/pinned-on flash suppressor . ab

DANIEL DEFENSE AR-15/M16

M4A1 SOCOM BLOCK II UPPER RECEIVER

Closely Patterned After U.S. Military Carbines

#100-024-478AV M4A1 5.56 NATO Upper, 14 .5" Bbl/12" RIS II Rail, 8K1189L00 � � � � � � $ 1216.00

These complete .224 Valkyrie AR-15 upper receivers that feature the same proven formula that led Cross Machine & Tool to victory in the 2017 Precision Rifle Series Tac Lite Pro Division . The complete AR-15 upper chambered in .224 Valkyrie features a 15” HDX Mod 4 M-LOK handguard, a 20” .224 Valkyrie barrel made from 416R stainless steel and has been air gauged to +- .0002” for the ultimate in precision . The I .B .C . Model is unique in that it has its muzzle brake and crown machined into the barrel to help keep your scope on target and track impacts . 20" 1:7 Twist 416R Stainless Steel Barrel .

CMT UHPR 15 .0 HDX M-LOK Handguard . Complete with CMT Bolt Carrier Group . Each Cross Machine & Tool complete .224 Valkyrie AR-15 Upper receiver comes with an included CMT M16 bolt carrier group as well as a CMT charging handle . All that is re-quired is a complete lower receiver of your own and your choice of optics . ab

CROSS MACHINE TOOL AR-15

COMPLETE .224 VALKYRIE UPPER RECEIVERS

Convert Your Rifle To .224 Valkyrie With A Complete Match Grade Upper

#100-027-275AV .224 Valkyrie Upper Rec’r, 20" Bbl, 5H1069D68 � � � � � � � � � � � � � � � � � � � � � $ 1185.00

#100-027-276AV .224 Valkyrie Upper Rec’r, 22" Bbl, 5H1069F68 � � � � � � � � � � � � � � � � � � � � � � 1185.00

#100-027-277AV .224 Valkyrie Upper Rec’r, 24 .5" Bbl, 5H1069H68 � � � � � � � � � � � � � � � � � � � � � 1185.00

Build your next custom AR-15 with an original Colt factory flattop upper fully finished and ready for in-stallation . Made from a high-quality aluminum alloy forging machined to precise tolerances for correct fit on Colt lowers and clones . Hardcoat anodized for added surface strength, abrasion resistance, and corrosion protection, with a uni-form, matte black finish that matches other factory components and easily accepts alternate finishes . The forward assist and ejection port cover already installed, so you can select the bolt assembly, carrier, gas key, and other components to suit your specific needs . White alphanumeric position markers on rail slots aid in removal and reinstallation of sights without loss of zero . 9mm - for building a dedicated pistol-caliber AR . Includes a unique-design shell deflec-tor . Does not include forward assist . Not drilled for gas tube . abSPECS: Aluminum, hard anodized, matte black. Fits standard Colt AR-15 lowers and clones with .250" pivot pins.

COLT AR-15/M16 UPPER RECEIVERStripped Flattop Upper

Genuine Colt Factory Part

#160-302-053AV Flattop Upper Rec’r w/Assist & Cover, 6A145L34 � � � � � � � � � � � � � � � � � � $ 190.99

#160-000-395AV 9mm Flattop Upper Rec'r, 6A158P64 � � 194.99

9mm Upper The Daniel Defense DDM4v11 carbine upper was designed for shooters who prefer to run the new Slim Rail with Keymod technol-ogy . The new 15" Slim Rail has incredible weight savings while main-taining strength and durability, but still allowing users to have their support hand extended out to drive the gun more precisely . The DDM4v11 Upper Receiver features a hard coat anodized Mil-Spec aluminum upper with M4 feed ramps and a hammer forged chrome moly 16" barrel in a 1-7 twist with a government profile . Threaded Muzzle: 1/2-28 TPI . Pinned low profile gas block machined from 4140 hardened steel, mid-length . Daniel Defense 17-4 PH stainless steel flash hider . Chrome Lined M16 profile bolt carrier group . 6061-T6 hard coat anodized 15" Daniel Defense Slim Rail . The Daniel Defense DDM4v11 Carbine Upper Receiver is the ideal upper for the shooter who prefers, light, slim and strong . DDM4v11 Pro is designed with the competitive shooter in mind . This new Upper Receiver is built around the 18” Strength-to-Weight (S2W) , cold hammer forged barrel, and delivers the control and precision needed to win on the course . ab#100-024-474AV DDM4v11 5.56 NATO Upper, 16"

Bbl/15" Slim Rail, 8K964C25 � � � � � � � � $ 987.00#100-024-476AV DDM4v11 Pro 5.56 NATO Upper, 18"

Bbl/15" Slim Rail, 8K1248K00 � � � � � � � 1276.00


DDM4V11 UPPER RECEIVERS

A Compact Tactical Upper Ready To Run Hard & Not Let You Down

The Daniel Defense DDM4 300S was designed for operators de-manding a short-barrel rifle chambered in the popular 300 Blackout cartridge . Using standard 5 .56mm magazines and bolts, the 300S is able to deliver .30 caliber ammunition with greater muzzle energy than comparable 5 .56mm rifles . The Daniel Defense DDM4 300S also features a durable hard coat anodized finish and a hammer forged 10 .3" chrome moly barrel with a 1-8 twist in a Strength-to-Weight (S2W) profile and a 5/8 x 24 tpi threaded muzzle . Pinned low profile gas block machined from 4140 hardened steel, pistol length . Daniel Defense 17-4 PH stainless steel extended flash suppressor .

From home defense, target shooting, hunting to suppressed operation, and tactical applications, the Daniel Defense DDM4 300S is capable of delivering exceptional performance from a compact, fast-handling package . ab

Delivers Exceptional Performance in a Compact, Fast-Handling Package

#100-024-481AV DDM4 300S 300 AAC Blackout Upper, 10 .3" Bbl, 8K1072L00 � � � � � � $ 1096.00


DDM4 .300 AAC BLACKOUT UPPER RECEIVER

The DDM4v9 upper is designed not only for tactical and self-defense applications, but the modern competition shooter as well . The long, 15" DDM4 quad-railed handguard over a 16" cold ham-


DDM4V9 COMPLETE UPPER RECEIVER

Tactical Carbine Upper Designed for the Modern Shooter

#100-024-473AV DDM4v9 5.56 NATO Upper, 16" Bbl/15" DDM Rail, 8K1052H00 � � � � � $ 1076.00

mer-forged Government profile barrel gives the shooter the option of extending his support hand well forward, out close to the muzzle, allowing him to "drive" the gun quickly and very precisely, and pre-venting over-travel when transitioning between multiple targets . The DDM4v9 has a forged 7075 T6 receiver with M4 feed ramps inside and a military-type hardcoat anodized finish . The 16" barrel has a 1-7" rifling twist, a pinned low-profile gas block machined from 4140 hardened steel, a mid-length gas tube, and DD's 17-4 PH stainless steel flash suppressor . Chrome-lined M16-profile bolt car-rier . Includes Daniel Defense polymer vertical grip with soft-touch overmolding for an excellent hold . Handy rail covers included . ab

Fully-assembled flattop upper receiver from the original manu-facturer of U .S . military M16s comes loaded with combat-proven features and ready to snap onto any mil-spec lower . Includes M16-type bolt carrier compatible with semi- or full-auto/burst lowers, A2 flash hider, and step-cut barrel that allows mounting of M203 gre-nade launcher . Comes with flip up rear sight with quick-adjust de-tent lever that lets you choose range settings . Government Carbine – M4-style upper has an M4 handguard with dual-insulated alumi-num internal shielding for excellent heat protection . A2-type front sight has side-mounted sling swivel that allows comfortable sling carry, even with a grenade or tear gas launcher installed . LE6920CK has a 16" barrel . LE6921CK has a 14 .5" barrel . M4 Carbine is a basic upper similar to the LE6920CK upper, without bolt/carrier group or charging handle . Has a GI-style plastic A2 handguard, A2 front sight tower, and A2 "birdcage" flash suppressor . Advanced Law Enforce-ment Carbine (ALEC) - “Monolithic” receiver and handguard are machined from a single piece of aluminum billet for superb strength and 14" of uninterrupted top rail space . Bottom rail removes for easy access to the barrel nut and fully free-floated barrel . Low-profile gas block includes a bayonet lug and an integral flip-up front sight with an A2-type post . LE6940CK has a 16" barrel and LE6944CK has a 14 .5" barrel . LE6960-CCU is the same upper found on the Colt Combat Unit Carbine AR-15 . Includes a 13" Centurion Arms slim profile, M-LOK, free float handguard, 16 .1" lightweight profile, and a mid-length gas system barrel . abSPECS: Receiver – 7075 T6 aluminum, hardcoat anodized, black. Barrel – 4140 carbon steel, black oxide finish. 16.1" (40.9cm) long. Chambered for 5.56mm NATO, chrome lined, 1-7" twist rifling. .250" dia. pivot and takedown pin holes.

COLT AR-15/M16

COMPLETE UPPER RECEIVERS

Original Colt Factory Top Half In Standard Or Quad-Railed Carbine Configurations

#160-000-388AV LE6920CK Gov’t Carbine Upper, 16" Bbl, 6A674B99 � � � � � � � � � � � � � � � � � � � � $ 683.99

#160-000-392AV LE6921CK Gov’t Carbine Upper, 14 .5" Bbl, 6A00QHF � � � � � � � � � � � � � � � 683.99

160-000-446AV M4 Upper Rec'r, 6A417N15 � � � � � � � � � � � 449.99#160-000-387AV LE6940CK ALEC Upper, 16", 6A959I99 � � 959.99#160-000-393AV LE6944CK ALEC Upper, 14 .5", 6A00LAL � � 1025.99 160-000-445AV LE6960-CCU Upper Rec'r, 6A599G99 � � 699.99

LE6920CK/LE6921CK

M4 Carbine

LE6940CK/LE6944CK

LE6960-CCU

Receivers

AR

-15

/M16


SINCE 1939

UP

PE

R R

EC

EIV

ER

SFAXON FIREARMS AR-15/M16

STRIPPED FORGED UPPER RECEIVER

Faxon's stripped upper forged from 7075 T6 aluminum and fin-

ish-machined to correct mil-spec dimensions, so it'll accept just about any AR-15 part available . Your customizing options are darned near unlimited . M4 feed ramps on barrel extension . .250" pivot/take-down pin holes . T-mark positions on Picatinny rail, but not painted . Of course, Faxon doesn't stop there . The entire receiver is trued (blueprinted) at the factory, and the inside is honed for smoother movement of the BCG . Shell deflector is hollowed out to reduce weight - and look different . Type III hardcoat anodized finish . ab

Enhanced, Mil-Spec Compatible Upper, Ready for

Your Custom Build

#100-022-867AV Forged Upper Receiver, 1D95I70 � � � � $ 99.99

Fully machined and finished, military style uppers ready for you to install your

choice of barrel, carrier, bolt, forearm, and lower to build a custom AR-15 . Choose from rugged A2 carry handle style, complete with cuts for mounting A2 rear sight, or A3 flattop with M4-type feed ramp cuts and Picatinny accessory rail for mounting a scope, ho-lographic sight, or flip-up “iron” sights . Both models feature shell deflector, forward assist housing, and provisions for installing an ejection port cover . Precision machined from a premium-grade aluminum forging and hardcoat anodized for extra strength, with a tough, scratch-resistant Teflon® coating . abSPECS: Aluminum, hard anodized, Teflon coated, matte black. Fits mil-spec AR-15 lower receiver with .250" pivot pins.

DPMS AR-15/M16

STRIPPED UPPER RECEIVERCarry Handle & Flattop Models For

Custom Builds; Machined From High-Grade Forgings

#231-000-152AV Stripped A2 Upper Rec'r, 1C82I44 � � � $ 96.99#231-000-053AV Stripped A3 Flattop Upper Receiver,

1C112P42 � � � � � � � � � � � � � � � � � � � � � � � � � � 141.99

FNH's flattop upper assemblies are the shortcut to getting a rifle customized to the type of shooting you intend to do . They come fully assembled and ready to install on the mil-spec lower of your choice - and fully equipped with popular accessories and options . All models have M4-pattern feed ramps to aid in reliable cycling, plus M16 bolt carriers with the extended bottom shroud to trip the auto-sear on full-auto/burst lowers . Bolt and carrier are high-pressure tested, then Magnetic Particle Inspected (MPI) for flaws . Standard Carbine (16" barrel) closely matches configuration of USGI M4A1 carbine upper, while Rifle (20" barrel) replicates the M16A3 rifle, both with GI-style molded plastic handguard, A2-style gas block/front sight, bayonet lug, front sling loop, and A2-style flash suppres-sor - both classic, proven, AR-15 configurations . Carbine barrel has cutout forward of front sight for grenade launcher . abSPECS: Upper Receiver - Forged aluminum alloy, hardcoat anodized, matte black finish. .250" dia. pivot/takedown pin holes. Barrel - cold hammer-forged Chromium-Molybdenum-Vanadium steel, manganese phosphate finish, matte black. Hard-chrome-lined to MIL-STD 171. Cham-bered for 5.56x45mm NATO (compatible with .223 Rem), with 1-7" rifling. Bolt - Carpenter 158 steel alloy. DMR/Tactical Carbine Handguards - Ma-chined 6061 T6 aluminum, hardcoat anodized, matte black.

FNH USA AR-15/M16

COMPLETE FN15 UPPER RECEIVERS

Top-Quality, Mil-Spec, Plug-N-Play Uppers; Standard Carbine/Rifle, Plus Tactical/Competition Models

16" Carbine

#119-000-258AV 16" Carbine Upper, 9A00PWI � � � � � � � $ 699.00#119-000-259AV 20" Rifle Upper, 9A699D00 � � � � � � � � 699.00

Flattop receiver provides non-re-ciprocating left-side charging handle

that lets you cycle the bolt without changing your firing grip . Fits a standard mil-spec lower and accepts mil-spec AR-15 bolt carrier groups and other parts . Detent keeps side charging handle forward during rifle operation . Bolt carrier door in traditional charging handle position enables easy bolt carrier removal and keep out dust and debris . No provisions for ejection port cover . Requires replacing standard cam pin with included cam pin for proper function . abSPECS: Machined 6061 T6 aluminum, hardcoat anodized matte black finish. Includes cam pin.

GIBBZ ARMS AR-15/M16

G4 SIDE CHARGING UPPER

#100-015-448AV G4 Side-Charging Upper, 2D227Q37 � � $ 240.00

Side Charging Upper Lets You Rack Bolt Without Changing Firing Grip

Fully assembled A3 flattop upper receiver is ready to drop onto any small-pin, mil-spec lower to create a streamlined, lightweight, optic-ready carbine . Features a Picatinny-railed gas block that's ready to accept the clamp-on front sight of your choice - or no sight at all if you're goal is optic-only sighting capability . Light Contour 16" “pencil” barrel keeps overall weight down, while the 5 .56x45mm NATO chamber accepts both commercial and mil-spec ammuni-tion, and the 1-9" rifling twist rate stabilizes a wide range of bullet weights, for maximum versatility in ammo choice . Comes equipped with a two-piece, snap-on/snap-off, heat-shielded M4-style poly-mer handguard and a proven, military-type A2 flash hider . abSPECS: Receiver - Forged aluminum, mil-spec hardcoat anodized, matte black. Barrel - 4140 chrome-moly steel, manganese phosphate Parker-ized, matte dark gray. 16" long. 5.56 NATO chamber, 1-9" rifling twist. 1/2"-28 tpi muzzle threads. .750" O.D. at gas block.

DPMS AR-15/M16

ORACLE UPPER RECEIVER ASSEMBLY

Complete Upper For A Fast-Handling, Fully Up-To-Date Carbine

#231-000-339AV Oracle Upper Receiver Assembly, 3B384I87 � � � � � � � � � � � � � � � � � � � � � � � � � $ 440.99

The MK12 SPR Upper Receiver from Daniel Defense is built around an 18" stainless steel barrel, engineered with a rifle-length direct impingement gas system and utilizing the MK12 gas block, which is built to Crane Specifications for USSOCOM . The Daniel Defense MK12 Upper Receiver features a rugged hard coat anodized Mil-Spec aluminum upper with a hammer forged stainless steel 18" barrel in a 1-7 twist with a MK12 profile . MK12 low profile gas block machined from 416 hardened steel, rifle length . Daniel Defense 17-4 PH stainless steel flash suppressor . 6061 T6 hard coat anodized 12" Daniel Defense DDM4 Rail . The MK12 Upper Receiver from Daniel Defense offers rugged dependability and precision accuracy in a complete package ab


MK12 SPR UPPER RECEIVER

Fully Featured Tactical Upper for Your Next Special Purpose Rifle

#100-024-477AV MK12 SPR 5.56 NATO Upper, 18" Bbl/12" DDM4 Rail, 8K1296H00 � � � � $ 1326.00


MK 18 UPPER RECEIVER

This upper has the same RIS II MK18 Rail Sys-tem handguard Daniel Defense provides to US-SOCOM, plus the compact 10 .3" cold hammer-forged barrel com-monly used in SOCOM SBRs for CQB operations . Other features include a DD low-profile gas block, bolt/carrier group, and charging handle . Mil-spec T-marks on the receiver rail, plus M4-type feed ramps to keep rounds cycling in and out of the chamber . The bare receiver is final-machined from a 7075 T6 aluminum forging, then given a Type III hardcoat anodized finish before the other compo-nents are painstakingly hand-assembled, quality-assurance tested, and test fired . All NFA rules apply. ab#100-023-304AV Complete MK18 Upper Rec'r,

8K1068K00 � � � � � � � � � � � � � � � � � � � � � � $ 1092.00

Complete, Fully Tricked Out, Ready To Run Semi-Auto Pistol Upper

DPMS AR-STYLE .308

LR-308 ORACLE UPPER RECEIVER

Ready to install carbine-style .308/7 .62 NATO flattop upper receiver comes fully assembled with bolt/carrier, charging handle, free-float handguard, gas block, and barrel . Lets you change your LR-308 from one type of rifle to another in just a few minutes - or build a completely new gun customized to your exact needs . Beefy, thick-walled receiver of extruded 6066 T6 aluminum is hardcoat anodized to military standards for extra surface strength, with a hard, black Teflon coating to resist scuffs and scratches . There's a 16½" barrel with a 1-10" twist for proper bullet stabilization, plus a stan-dard, plastic carbine handguard, forward assist, ejection port cover, A2 “bird cage” flash hider, and Picatinny rail gas block . Lightweight, aluminum gas block has plenty of metal to withstand the hot gases from thousands of firing cycles; topside Picatinny rail lets you mount the front sight of your choice, including flip-up models . Note: Re-quires a “gas block height” front sight . abSPECS: Receiver/Handguard/Gas Block/Charging Handle – 6066 T6 aluminum, hard-anodized and Teflon® coated, black. Bolt/Carrier – 4140 steel, Parkerized, matte black. Barrel – 4140 chrome-moly steel (CM), Parkerized, matte black, or 416 stainless steel (SS), natural finish. Fits DPMS LR-308 lower receivers only. .275" pivot/takedown pin holes.

Complete Carbine-Style Top Half Includes Barrel, Bolt & Carrier & All the Popular Trimmings!

#231-000-349AV LR-308 Oracle Upper w/16½" CM Bbl, 3B651J58 � � � � � � � � � � � � � � � � � � � � $ 708.99

Here's the foundation for a truly unique, customized tactical AR-15 pistol or SBR: the upper receiver plus barrel and handguard of Daniel Defense's MK18 SOCOM carbine . Mil-spec upper receiver has “T” indexing marks in the flattop slots, plus M4 feed ramps to aid in feeding reliability . The Government-profile 10 .3" barrel is cold hammer-forged and chrome-lined, with low-profile gas block pinned in place and carbine-length direct impingement gas sys-tem installed . The “T”-marked, quad-Picatinny railed handguard is the exact same RIS II MK18 model Daniel Defense provides to US-SOCOM . Because individual operators prefer to customize to their specific needs, we've left off the following items, so you can choose and install exactly what you want: bolt/carrier group, muzzle device, and charging handle . ab

DANIEL DEFENSE MK18 SOCOM UPPER RECEIVER + HANDGUARD

Build Your Next AR Around The Platform The Professionals Use

#100-018-030AV MK18 SOCOM Upper Rec'r, 8K834N00� � $ 874.99

SPECS: Receiver - 7075 T6 aluminum, hardcoat anodized, matte black. .250" dia. pivot/takedown pin holes. Comes with forward assist and ejec-tion port cover installed. Barrel - hammer-forged chrome moly Vanadium steel, mil-spec black phosphate finish. 10.3" length. 1-7" rifling twist. Gas Block - Hardened, machined 4140 steel, black phosphate finish. Hand-guard - Machined 6061 T6 aluminum, hardcoat anodized, Flat Dark Earth. All NFA rules apply.

Unique upper receiver adds tons of fun to your rifle! Complete upper converts your AR-15 into a multi-purpose, belt-fed rifle that will even feed from a traditional stick magazine . Semi-Auto upper comes with a top-mounted Picatinny rail and your choice of either a Picatinny or KeyMod handguard . Chrome-lined, 16 .25" barrel has a 1-7" twist and ½"-28 muzzle threads . Proprietary quick-detach barrel system lets you replace the barrel in mere seconds . The 6-lug, rotating bolt is more robust than a standard AR-15 bolt and designed to withstand the pounding of sustained fire . Upper does not include sights, but is optic ready . Uses M249 SAW links to form the belt . Requires no additional paper work or registration for purchase . A Full-Auto version is available with a Picatinny handguard . abSPECS: 7075-T6 billet, Type III anodized finish, matte black. 5.56mm NATO. Steel feed tray. ½"-28 threaded muzzle. Semi-auto bolt carrier. 32.25" (81.9cm) OAL. 7.45 lbs. (3.4kg) wt.

#100-019-945AV MCR Belt-Feed Upper Receiver, Picatinny , 9G3500J00 � � � � � � � � � � � $ 3500.00

#100-019-946AV MCR Belt-Feed Upper Receiver, Keymod , 9G00CZK � � � � � � � � � � � � � � 3500.00

#100-019-947AV MCR Belt-Feed Upper Receiver, Full-Auto, 9G4195N00 � � � � � � � � � � � 4195.00

Turns Your AR Into A Belt Fed Rifle

FIGHTLITE INDUSTRIES

MCR BELT-FEED UPPER RECEIVER

MCR UPPER ACCESSORIES - With these handy accessories, you can easily run belt ammo through your rifle equipped with an MCR upper receiver . Aluminum Magazine Adapter plugs into MCR's standard magazine well and permits mounting of linked ammo containers to MCR . Pouch holds 100 rounds of M27 linked 5 .56 ammo . Keeps ammo belt out of the dirt while on the range or during tactical operations . SPECS: Magazine Adapter – Aluminum, matte black. 2.4” long, 0.9” wide. Pouch – Nylon, Woodland Camo pattern.#100-019-950AV MCR Magazine Adapter,

9G125E00 � � � � � � � � � � � � � � � � � � � � � � � � $ 125.00#100-023-023AV MCR 100-Rd Soft Pouch, Woodland,

9G79D95 � � � � � � � � � � � � � � � � � � � � � � � � � 79.95


brownells.com

AR

-15/M

16U

PP

ER

RE

CE

IVE

RS

The Geissele URG-I AR-15 upper receiver is a near clone of the "Upper Receiver Group Improved" currently going into service with USASOC (United States Army Special Operations Command) . It of-fers a host of improvements over the standard "mil-spec" M4 upper we’ve grown so accustomed to - and it will transform your AR-15 shooting experience . Brownells offers the Geissele URGI upper in stripped form or a Complete model ready to snap onto the lower of your choice and hit the range .

To begin, Geissele installs a 14 .5" Daniel Defense barrel opti-mized to handle the full rigors of the new M855A1 (AB57) ammuni-tion, with a Surefire Warcomp muzzle device pinned up front . Func-tioning as both a flash suppressor and a muzzle brake, the URGI’s Warcomp also serves as a rock-solid adapter for a Surefire SOCOM 5 .56 Fast-Attach sound suppressor (not included) . In between, a mid-length gas system with low-profile gas block ensures more reliable cycling than a standard carbine-length tube .

Each URGI is fitted with the handguard Geissele designed spe-cifically for USASOC, the MK16 M-LOK™ Super Modular Rail hand-guard with a full-length Picatinny top rail and lotsa slots for other ac-cessories . T-markings are engraved on the rail but not painted white to help keep the rifle unobtrusive . The URGI Upper Receiver is also outfitted with Geissele’s ambidextrous Airborne Charging Handle, with easy-to-grasp levers that are deeply checkered to ensure a confident grip when you need to charge the chamber in a hurry .

For shooter who want to do more customizing, the "Stripped" URGI upper receiver eliminates the bolt/carrier group, Warcomp, and Airborne handle . Features it retains: core receiver with forward assist, shell deflector & ejection port cover, Daniel Defense 14 .5" barrel, Geissele MK16 Super Modular Handguard, Mid-length gas system with pinned low-profile gas block .

NOTE: The URGI upper receivers DO NOT meet the 16" mini-mum barrel length requirement of the NFA, and they require regis-tration and a tax stamp with the Bureau of Alcohol, Tobacco, Fire-arms and Explosives (BATFE) when assembled into a complete rifle . Additional state and local restrictions may apply . ab

GEISSELE AUTOMATICS AR-15/M16

URG-I SOCOM UPPER RECEIVER

Build Your Rifle on the Upper Receiver Used By USASOC - A Clone (Almost!)

#100-026-695AV USASOC M-LOK Upper Rec’r, Complete, 7B1249G00 � � � � � � � � � � � $ 1249.00

#100-026-694AV USASOC Upper Rec’r, Stripped, 7B00GIE � � � � � � � � � � � � � � � � � � � � � � � � � 979.00

Styled after the Colt pistol-caliber carbine, FM's upper offers AR aficionados the opportunity to put together a unique 9mm-cham-bered PCC . These are complete uppers with FM's non-reciprocating charging-handle positioned on the left side of the M-LOK hand-guard . The "monolithic" configuration is achieved with a proprietary interlock between the upper and the slim-line handguard . Designed to work with lower receivers that use either Colt SMG magazines or Glock® pistol mags . Available in three barrel lengths: 16" barrel comes with FM-9 Muzzle Brake, while 8 .5" and 10 .5" barrels have FM's forward blast diffuser directs the muzzle blast forward, away from the shooter . 1/2"-36 tpi thread, if you'd like to change the muzzle device in the future . ab

FM PRODUCTS AR-15

FM-9 MONOLITHIC UPPER RECEIVER

Complete & Ready To Mate With the Lower of Your Choice

#100-027-598AV FM-9 Upper Rec'r, 16" Bbl, 6D425F00 � � � $ 425.00#100-027-613AV FM-9 Upper Rec'r, 10 .5" Bbl, 6D399I00 � � � 399.00#100-027-614AV FM-9 Upper Rec'r, 8 .5" Bbl, 6D375A00 � � � 375.00

This complete upper receiver for Colt clones is an exact copy of the one currently used by the United States Army Special Operations Command (USA-SOC) . Specifically designed for USASOC, the MK 16 M-LOK Super Modular Rail handguard sports a full-length Picatinny top rail with non-painted T-marks, plus plenty of slots for M-LOK compatible accessories . The 14 .5" Daniel Defense barrel is optimized to handle the full rigors of M855A1 (AB57) ammunition . Upper is equipped with Geissele’s ambidextrous Airborne Charging Handle, with easy-to-grasp levers that are deeply checkered to ensure a confident grip . Available with a pinned and welded Surefire SF4P four-prong flash hider to meet the 16" minimum BATF length requirement . Non-pinned and welded muzzle devices requires BATF registration or tax stamp if used on a rifle or carbine . ab


COLT URG-I CLONE

USASOC Upper Receiver Clone

#100-031-174AV URG-I Clone Upper, Pinned/Welded, 7B1499D00 � � � � � � � � � � � � � $ 1499.00

#100-031-175AV URG-I Clone Upper, NOT Pinned/Welded, 7B1499I00 � � � � � � � � � � � � � � 1499.00

The purpose built Geissele URG-I M-LOK AR-15 Upper Receiver is fine-tuned to handle mil-spec M855A1 ammo! Mil-spec upper receiver is equipped with a cold hammer-forged Daniel Defense barrel, upper is outfitted with a mid-length gas system that offers reduced recoil and less wear on internal components . A full-length Picatinny top rail along with an M-LOK compatible, free-floating handguard give you plenty of accessory mounting options . Semi-Stripped includes receiver, handguard, and barrel; does not include bolt/carrier group, charging handle, or flash hider, so you can cus-tomize those components to your exact needs . Complete comes with mil-spec bolt/carrier group, Geissele’s ambidextrous charging handle, and four pronged Surefire flash hider . ab


URG-I M-LOK UPPER RECEIVER

Near Clone Of The USASOC Upper

#100-033-206AV URG-I M-LOK Upper, Semi-Stripped, 7B00FNN � � � � � � � � � � � � � � � � � � � � � � � � � $ 979.00

#100-033-207AV URG-I M-LOK Upper, Complete, 7B1249Q00 � � � � � � � � � � � � � � � � � � � � � � � 1249.00

The SR-25 Complete Upper provides the performance and accuracy Knight's has built their reputation on . Packing a chrome-lined barrel chambered with 5R cut rifling and a 3-prong QDC flash suppressor, this upper strikes the right balance for a precision rifle equally suited for CQB . Each upper is outfitted with a one-piece, free floating, URX4 handguard and integrated barrel nut, plus a continu-ous Picatinny top rail and M-LOK slots . Complete upper assembly comes standard with BCG, Knight’s Armament micro front sight, Knight’s Armament Micro 600m rear sight, SR-25 buffer, SR-25 ac-tion spring, and a Magpul M-LOK cover kit . Brownells Gun Tech™ Note: Compatible only with SR-25 lower receivers, and lowers uti-lizing the SR-25 pattern . Will not work with DPMS lowers . ab

KNIGHT'S ARMAMENT AR-STYLE .308

SR-25 COMPLETE UPPER RECEIVERS

Add a Lower & Head for the Range

#100-027-607AV SR-25 Combat Carbine .308 Upper, 14 .5" Bbl, 4C00BNN � � � � � � � � � � � � � � $ 3500.00

#100-027-608AV SR-25 Combat Carbine .308 Upper, 16" Bbl, 4C00HEH � � � � � � � � � � � � � � � � 3500.00

#100-027-609AV SR-25 Precision Carbine .308 Upper, 16" Bbl, 4C00QVJ � � � � � � � � � 3500.00

#100-027-610AV SR-25 Precision Rifle .308 Upper, 20" Bbl, 4C00NBQ � � � � � � � � � � � � � � � 3500.00

#100-027-611AV SR-25 Precision Rifle 6.5 Creedmoor Upper, 22" Bbl, 4C00NVD � � � � � � � � � � � � � � � � � � � � � � � 3500.00

These unique monolithic upper receivers give you the ability to quickly and conveniently change barrels for more choices in lengths, calibers, materials, and profiles . Barrels are held in place with a proprietary locking system that utilizes two, easily acces-sible locking bolts . Receivers and handguards are both made from a single piece of forged aerospace aluminum and offer a full length Picatinny top rail, M-LOK attachments on all sides of the handguard, along with QD sling swivel attachment points . MRP upper is Cham-bered in 5 .56 and includes a chrome-lined barrel with a 1-7" rifling, low-profile gas block, mid-length gas system with straight gas tube, A2 flash suppressor, and forward assist and dust cover already in-stalled . Does not include a bolt/carrier group or charging handle . We offer the MWS as a stripped upper/handguard assembly . Designed to fit the LMT 7 .62 MWS and Knight's Armament SR-25 ( .308/7 .62) lower receivers; NOT compatible with DPMS LR-308 pattern lower receivers . Brownells Gun Tech™ Note: MWS and MRP uppers ac-cept LMT quick change barrels ONLY (sold separately) . ab#100-030-191AV MRP 5.56 NATO Rifle Upper, 16" Bbl,

4A1299C00 � � � � � � � � � � � � � � � � � � � � � � $ 1299.00#100-030-190AV MRP 5.56 NATO Carbine Upper, 16"

Bbl, 4A00CFM � � � � � � � � � � � � � � � � � � � 1249.00#100-030-184AV MWS 7.62/.308 Upper Receiver,

4A1049N00 � � � � � � � � � � � � � � � � � � � � � � 1049.00

LEWIS MACHINE & TOOL (LMT) AR-15/AR-308

MRP & MWS MONOLITHIC UPPER RECEIVERS

MRP (5 .56/ .223)

MWS ( .308/7 .62)

Quickly & Easily Change Barrels, Even Gas Systems

This upper from LMT is a classic A2 Stripped Upper in its most basic form . It's the ideal foundation for building an AR-15 with that iconic carry-handle profile that to this day symbolizes the AR . It has a full-auto cut, but NO M4 feed ramp cuts, which is correct for an original A2 upper . Accepts standard .250" pivot/takedown pins . Forged aluminum, hardcoat anodized finish, matte black . ab

LEWIS MACHINE & TOOL (LMT) AR-15/M16

STRIPPED A2 CARRY-HANDLE UPPER RECEIVER

Ready To Serve as the Foundation for a D.I.Y. Build With a

Classic Profile

#100-030-192AV Stripped A2 Upper Rec'r, 4A00IAI � � � $ 129.99

FM PRODUCTS AR-15

MONOLITHIC UPPER RECEIVER

Ultra-Lightweight Upper Provides A Slim, Trim Look & Feel

Matched upper receiver/handguard set has a proprietary inter-lock that gives a seamless transition between receiver and hand-guard . The handguard free-floats the barrel for excellent accuracy potential, and it’s ultra-slim cross-section not only reduces weight but feels great in your hand . Plenty of M-LOK slots and a full-length Picatinny rail up top for mounting accessories . The included steel barrel nut (barrel itself not included) easily installs with a standard 1-3/16" or 30mm box wrench, or even a crescent wrench . An inno-vative locking system ensures the barrel nut will never come loose – even with hard use . Both receiver and 'guard are machined from 6061 T6 aluminum and given a tough Type III mil-spec hardcoat anodized finish to resist corrosion . Comes with standard ejection port cover system and integrated shell deflector . Add your chosen barrel, bolt/carrier group, charging handle, install on a mil-spec lower receiver, and hit the range . Available with 8.5" and 15" hand-guard length . ab#100-027-988AV Monolithic Upper Rec'r w/15" HG,

6D165A00 � � � � � � � � � � � � � � � � � � � � � � � � $ 165.00#100-027-989AV Monolithic Upper Rec'r w/8.5" HG,

6D149H00 � � � � � � � � � � � � � � � � � � � � � � � � 149.00

This upper comes fully assembled and ready to drop on any pistol caliber lower receiver that uses Glock® magazines . The charg-ing handle is mounted forward, on the left side of the handguard, for easy access with your support hand . With a full-length Picatinny top rail and M-LOK® slotted handguard, it offers plenty of mounting space for optics and as many accessories as you need . A special in-terlocking connector between the receiver and handguard ensures the barrel nut will not work loose over time . The Melonite-finished 4150 carbon steel barrel has a button-rifled bore, 1-10" twist, and ½"-36 threaded muzzle . Bolt/carrier is Melonite finished, too . Engi-neered to function reliably, this receiver is forgiving enough to cycle even the most economical (we’re not saying "cheap"!) steel, brass, or aluminum cased ammo . Comes with standard A2 flash suppressor OR a sound suppressor-ready Tri-Lug muzzle . ab

FM PRODUCTS AR-15

COMPLETE 9MM UPPER RECEIVERS

Complete Flattop Upper for Pistol Caliber AR-15 Carbines

#100-024-843AV FM-9 Assembled M-LOK Upper Receiver, 16", 6D425M00 � � � � � � � � � � $ 425.00

#100-024-844AV FM-9 Assembled M-LOK Upper Receiver, 10 .5", 6D399I00 � � � � � � � � � � 399.00

#100-026-233AV FM-9 Assembled M-LOK Upper Receiver, 8 .5", 6D375C00 � � � � � � � � � � 375.00

100-032-792AV FM-9 Assembled M-LOK Upper, 10 .5" Tri-Lug Bbl, 6D425I00 � � � � � � � � � � � � � 425.00

Tri-Lug Barrel

Item

AR

-15

/M16


SINCE 1939

Ready for your next custom build, this forged aluminum, A4-style upper receiver already has the ejection port cover and forward assist in-stalled . Barrel extension has M4 feed ramps to support reliable feed-ing . Picatinny top rail includes white "T"-marks in the cross-slots for precise positioning of optics or iron sights without the loss of zero . Fits standard lowers with .250" pivot and takedown pins . abSPECS: 7075-T6 aluminum, hardcoat anodized, matte black.

ROCK RIVER ARMS AR-15/M16

FORGED A4 UPPER RECEIVER Top-Quality Mil-Spec Upper Ready

For Your Next Custom Project

#739-000-021AV Forged A4 Upper Rec'r , 9C121N42 � � $ 125.00

RADICAL FIREARMS AR-15/M16

ALMOST-COMPLETE UPPER RECEIVERS

Rifle and pistol flattop upper receivers are assembled and com-plete - minus only the bolt/carrier group and charging handle . Lets you choose versions of those components that exactly suit your taste and the type of shooting you do (rather than pay for parts you're going to replace) . Available chambered in 5.56 NATO (1-7") and .300 AAC Blackout (300 BLK, 1-8"), with a choice of standard USGI M4, SOCOM, or HBAR barrel profile . Includes low-profile Micro gas block and A2 flash suppressor . 4150V chrome-moly steel barrels have a hard, black Melonite finish . Picatinny receiver rail continues along the length of the top of the free-float Radical FGS (Forward Guard System) round railed handguard machined from billet alumi-num . .250" pivot/takedown pin holes . ab

#100-806-003AV 5.56 Upper, 16" M4 Bbl /CL/FGS, 8K239A99 � � � � � � � � � � � � � � � � � � � � � � � � $ 239.99

#100-806-004AV 5.56 Upper, 16" SOCOM Bbl/ML/FGS, 8K239Q99 � � � � � � � � � � � � � � � � � � � � � � � � 239.99

#100-806-002AV 5.56 Upper, 10 .5" M4 Bbl/CL/FGS, 8K239E99 � � � � � � � � � � � � � � � � � � � � � � � � 239.99

#100-806-001AV 5.56 Upper, 7 .5" M4 Bbl/PL/FGS, 8K239Q99 � � � � � � � � � � � � � � � � � � � � � � � � 239.99

#100-806-006AV 300 BLK Upper, 16" HBAR Bbl/PL/FGS, 8K239N99 � � � � � � � � � � � � � � � � � � � 239.99

#100-806-005AV 300 BLK Upper, 8 .5" HBAR Bbl/PL/FGS, 8K239D99 � � � � � � � � � � � � � � � � � � � 239.99

Just Add BCG & Handle, Install on a

Lower & Hit the Range

UP

PE

R R

EC

EIV

ER

S

This receiver is machined to precise final specifications from

7075 aluminum forgings to produce a tough, high-quality upper you can depend on . Features include M4-pattern feed cuts for reliable feeding, engraved “T” marks on the rail for precise optic positioning, and a military-style, hard-anodized finish that will stand up to rough use . Fits standard lowers with .250" pivot and takedown pins . 7075 T6 aluminum, hardcoat anodized, matte black . This upper is really, truly stripped - the bare receiver with nothing on it, so you'll even have to add a forward assist and ejection port cover . ab

LUTH-AR AR-15/M16

STRIPPED A3 UPPER RECEIVERHigh-Quality Forged Flattop

Upper For Your Next Dream Gun

#100-028-054AV A3 Upper Rec'r, Stripped, 3D79M22 � �$ 108.05

Stripped upper receiver comes bare - without the charging handle, ejection port cover, or forward assist - so you can totally build your rifle from scratch . M16A3 flattop configuration offers plenty of flex-ibility in both open and optical sighting options . MIL-STD 1913 Pica-tinny rail has plenty cross-slots that accept popular scope mounts . Shell deflector and forward assist are machined as a single unit . abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black finish. .275" dia. pivot and takedown pin holes. Compatible with Gen I DPMS LR-308 lower receivers and barrels only.

LUTH-AR AR-308

STRIPPED A3-STYLE UPPER RECEIVERHigh-Quality 308 Flattop Upper

for Your Next Dream Rifle

#100-028-068AV AR-308 A3 Upper Receiver, Stripped, 3D139B92 � � � � � � � � � � � � � � � � � � � � � � � � $ 150.35

Boasting the latest in AR design, the SLH M-LOK Assembled Upper Receivers is built around a mid-length gas system designed to reduce wear on internal components as well as mitigate recoil . Chambered in .223 Wylde, the pencil-profile barrel enables users to get the most accuracy possible from their 5 .56 NATO and .223 Rem . Ammunition, while the A2 flash hider quickly disperses combus-tive gasses . The slim, streamlined handguard is compatible with all M-LOK accessory attachments . Receiver forged from 7075 alumi-num and includes M4-style feed ramps . Does not include charging handle or bolt/carrier group . ab

MIDWEST INDUSTRIES AR-15

ASSEMBLED UPPER RECEIVER

Cutting-Edge Upper Merges the Best Features Into a Single Receiver

#100-032-030AV SLH M-LOK Upper Rec'r, 16" Bbl, 2A515M00 � �$ 535.00

These complete upper receivers offer an extremely lightweight configuration, allowing for rapid acquisition and maximum mobil-ity . Machined from 7075 aluminum forgings, uppers are chambered in .223 Wylde and include M4 feedramps . Precision manufactured lightweight profile barrels ensure you get the most accuracy poten-tial out of your match-grade .223 Rem . ammo while still being able to shoot 5 .56 NATO . The unique, free floating, Combat M-LOK Rail Handguard sports rows of M-LOK compatible attachment points, plus a full length Picatinny top rail, allowing you to accessorize the rifle to meet your unique needs . Handguard comes with two anti-rotation QD sling sockets . Other highlights include engraved T-marks on the receiver and the 1/2"x28 threaded muzzle with an A2 style flash hider . Also available with Midwest Industries Slim Line Handguard (SLH) for a perfect fit and matching finish, with a full length Picatinny top rail and plenty of M-LOK accessory-attachment points for added customization . Chambered in .223 Wylde, with a mid-length gas system, this lightweight barrel lets you make the most of both 5 .56 NATO and .223 Rem ammo . ab

MIDWEST INDUSTRIES AR-15

LIGHTWEIGHT UPPER RECEIVER

Complete Uppers For Lightweight, Highly Mobile Rifles

#100-032-817AV Lightweight Upper w/12" M-LOK Combat Rail, 2A564K99 � � � � � � � � � � � $ 574.95

#100-032-818AV Lightweight Upper w/14" M-LOK Combat Rail, 2A571A99 � � � � � � � � � � � � 579.95

#100-032-819AV Lightweight Upper w/15" M-LOK Combat Rail, 2A00HPF � � � � � � � � � � � � 584.95

#100-032-820AV Lightweight Upper w/12" M-LOK SLH Rail, 2A00FAD � � � � � � � � � � � � � � � � 530.00

#100-032-821AV Lightweight Upper w/15" M-LOK SLH Rail, 2A00IUE � � � � � � � � � � � � � � � � 540.00

This high value, no-nonsense complete upper receiver assem-bly is ready to be mated with your lower . At the heart of the MK1 MOD 1-M line is the PWS long stroke piston system, which utilizes an operating rod attached to the carrier and a floating head piston . This innovative design enhances overall reliability, while also reduc-ing carrier tilt, cam pin wear, and carrier bounce . Fully forged up-per comes with a free floating, M-LOK handguard with a Picatinny top rail that melds seamlessly with the receiver rail . Free floating, M-LOK handguard with a Picatinny top rail melds seamlessly with the receiver rail . Upper assembly includes a Radian Raptor charging handle, a 3-setting adjustable gas system, and an A2 flash hider . MK107 upper receiver has a 7 .75” barrel and Triad556 Compensator . MK111 upper receiver comes with an 11 .85” barrel and a Triad556 Compensator . MK114 has a 14 .5” barrel with a pinned FCS 556 Compensator . MK116 upper receiver sports a 16 .1” barrel with a FCS 556 Compensator . The MK109 includes a 9 .75" barrel with Triad 30 Compensator . ab

PRIMARY WEAPON SYSTEMS AR-15

COMPLETE MOD 1-M UPPER RECEIVER

Incorporates Tried & True Long Stroke Piston System

#100-031-912AV MK107 .223 Wylde Upper, 7 .75" Bbl, 4B00DCN � � � � � � � � � � � � � � � � � � � � � � � � $ 892.99

#100-031-913AV MK111 .223 Wylde Upper, 11 .85" Bbl, 4B892B99 � � � � � � � � � � � � � � � � � � � � � � � � 892.99

#100-031-914AV MK114 .223 Wylde Upper, 14 .5" Bbl, 4B00ADK � � � � � � � � � � � � � � � � � � � � � � � � � 892.99

#100-031-915AV MK116 .223 Wylde Upper, 16 .1" Bbl, 4B892P99 � � � � � � � � � � � � � � � � � � � � � � � � 892.99

#100-031-916AV MK109 .300 Blackout Upper, 9 .75" Bbl, 4B892E99 � � � � � � � � � � � � � � � � � � � � 892.99

Outfitted with a 3-setting adjustable gas system, a free-floating MLOK handguard, plus a Radian Raptor charging handle, all mated to an extruded upper receiver, the MK1 PRO line is ideal for shooters of all levels . The PWS long stroke piston system enhances overall reliability, while also reducing carrier tilt, cam pin wear, and carrier bounce . Chambered in .223 Wylde, the PWS MK1 PRO uppers let you get the most performance possible from 5 .56 NATO and .223 am-


MK1 PRO COMPLETE UPPER RECEIVER

A True Work Horse For All Uses

#100-033-589AV MK111 PRO .223 Wylde Upper, 11 .85" Bbl, 4B599H00 � � � � � � � � � � � � � � � � � � � $ 649.95

#100-033-590AV MK116 PRO .223 Wylde Upper, 16 .1" Bbl, 4B599I00 � � � � � � � � � � � � � � � � � � � � 649.95

RADICAL FIREARMS AR-15/M16

HYBRID UPPER RECEIVER ASSEMBLIES

Radical Firearms offers a wide variety of rifle and pistol flattop upper receivers, with one "radical" departure from traditional the "complete upper ." The bolt/carrier group and charging handle are omitted, so you can get these components separately, configured exactly the way you want them . All Radical hybrid uppers are top, law-enforcement grade, drop in receivers, ready to be mated to any mil-spec lower receiver . They are available chambered in 5.56 NATO (1-7"), .300 AAC Blackout (300 BLK, 1-8"), and Russian 7.62x39, (1-10") with a choice of standard USGI M4, SOCOM, or HBAR bar-rel profile, with a low-profile Micro gas block and muzzle tipped with an A2 flash suppressor . Barrels are 4150V chrome-moly steel with a hard, black Melonite finish . Picatinny receiver rail continues along the length of the top of the handguard . Available free-float handguards: standard KeyMod accessory attachment points, Hy-brid with reverse KeyMod slots that reduce your risk of accessories falling off during vigorous maneuvers, and Radical FGS (Forward Guard System) round railed guard (on some models) . .250" pivot/takedown pin holes . abSPECS: Required gas tube lengths: PL = pistol; CL = carbine; ML = mid-length; RL = rifle.

A Plethora of Rail Configurations & Barrel Lengths - Add the BCG of Your Choice

#100-023-347AV 5.56 Upper, 16" M4 Bbl/CL/Hybrid Rail, 8K242A40 � � � � � � � � � � � � � � � � � � � �$ 291.87

#100-023-349AV 5.56 Upper, 16" SOCOM Bbl/RL/Hybrid Rail, 8K291C87 � � � � � � � � � � � � � � 291.87

#100-023-346AV 5.56 Upper, 10 .5" M4 Bbl/CL/KeyMod Rail, 8K318C85 � � � � � � � � � � � � � � � � � � � � 332.13

#100-023-345AV 5.56 Upper, 10 .5" M4 Bbl/CL/Hybrid Rail, 8K291L87 � � � � � � � � � � � � � � � � � � � � � 291.87

#100-023-344AV 5.56 Upper, 7 .5" M4 Bbl/PL/KeyMod Rail, 8K332B13 � � � � � � � � � � � � � � � � � � � � � 332.13

#100-023-356AV 300 BLK Upper, 16" HBAR Bbl/PL/Hybrid Rail, 8K291E87 � � � � � � � � � � � � � � 291.87

#100-023-355AV 300 BLK Upper, 10 .5" HBAR Bbl/PL/KeyMod Rail, 8K335D13 � � � � � � � � � � � � � 335.13

#100-023-353AV 300 BLK Upper, 10 .5" HBAR Bbl/PL/FGS Rail, 8K239G99 � � � � � � � � � � � � � � � � 239.99

#100-023-351AV 300 BLK Upper, 8 .5" HBAR Bbl/PL/Hybrid Rail, 8K291F87 � � � � � � � � � � � � � � 291.87

#100-023-359AV 7.62x39 Upper, 16" HBAR Bbl/CL/KeyMod Rail, 8K308C58 � � � � � � � � � � � � 332.13

#100-023-358AV 7.62x39 Upper, 16" HBAR Bbl/CL/Hybrid Rail, 8K291M87 � � � � � � � � � � � � � � 291.87

#100-023-357AV 7.62x39 Upper, 16" HBAR Bbl/CL/FGS Rail, 8K239J99 � � � � � � � � � � � � � � � � � � � � � 239.99

The PWS MK2 MOD 1-M complete upper receiver assemblies provide a simple, drop-in upgrade for your AR platform . Built around a fully forged receiver, with Radian Raptor charging handle included, the receiver has a Picatinny top rail that blends smoothly with the top rail on the free-floating M-LOK handguard . A 3-setting adjustable gas system lets you fine tune the upper to run reliably and smoothly on your ammo . PWS made sure the MK2 MOD 1-M upper receivers were lightweight, yet solid feeling, by adding lightening cuts to re-move excess material and eliminating the forward assist . The MK216 MOD 1-M has a 16 .1” length barrel with a FSC30 Compensator . The MK220 MOD 1-M with 20” barrel and PRC 30 compensator is the ideal for quick follow up shots at long distances . ab


COMPLETE MK2 MOD 1-M UPPER RECEIVER

Combines Weight Savings & Long Range Accuracy

#100-031-917AV MK216 .308 Win Upper, 16 .1" Bbl, 4B00LVH � � � � � � � � � � � � � � � � � � � � � � � � $ 1232.99

#100-031-919AV MK218 6.5 Creedmoor Upper, 18" Bbl, 4B00DUJ � � � � � � � � � � � � � � � � � � � 1232.99

#100-031-918AV MK220 .308 Win Upper, 20" Bbl, 4B00HBQ � � � � � � � � � � � � � � � � � � � � � � � 1232.99

munition . An A2 flash hider on the end of the barrel helps dissipate combustive gases and reduce muzzle flash . Forward assist has been eliminated . The MK111 PRO upper comes with an 11 .85" barrel and carbine length gas system . The MK116 PRO includes a 16 .1" barrel with a mid-length gas system . ab


brownells.com

Stripped receiver has WMD’s NiB-X nickel boron coating inside and out to provide an exception-ally tough, ultra-smooth surface finish for outstanding wear resistance and lubricity . A ceramic topcoat is applied for color on the exterior only, leaving the nickel boron exposed inside to keep friction with the bolt carrier to the absolute minimum . Works great with standard carriers, too, but even smoother with nickel boron coated bolt carriers, including WMD’s NiB-X coated carrier, available separately . abSPECS: 7075 T6 aluminum, NiB-X coating with matte ceramic finish, Black or Flat Dark Earth. Stripped receiver only. Fits standard AR-15/M16 lowers, and accepts standard barrels and upper receiver parts. .250". dia. pivot/takedown pin holes.

WMD GUNS AR-15/M16

NIB-X™ COATED UPPER RECEIVERUltra-Hard, Smooth-As-Glass Finish For Maximum Durability

& Smooth Cycling

#100-010-558AV NiB-X Upper Rec'r, Blk, 3C148G09 � � $ 184.99#100-010-559AV NiB-X Upper Rec'r, FDE, 3C148Q09 � � 184.99

The MUR is a flattop upper receiver with thicker walls than a standard upper to provide a more rigid platform for greater stability, better accuracy, longer service life, and improved reliability . Precision machined from a fully heat-treated and cryogenically stress-relieved aluminum forging, before hand finishing to final dimensions . All critical interface points are 100% compatible with mil-spec select-fire AR-15/M16/M4 compo-nents and lower receivers, and will fit most commercial semi-auto lowers . A slick, dry-lube coating over the hard-anodized finish fur-ther guards against surface wear and helps ensure smooth opera-tion of bolt/carrier and other internal components . Comes with true MIL-STD 1913 Picatinny rail with 13 cross-slots, plus forward assist and ejection port door pre installed . Gunsmith installation recom-mended . abSPECS: 7075 T6 aluminum, Type II, Class 3 hardcoat anodized, dry lube coating, matte black. .250" dia. pivot/takedown pin holes.

VLTOR AR-15/M16

MODULAR UPPER RECEIVERExtra Metal For Superb

Strength & Rigidity; Mil-Spec Dimensions For

Compatibility

#100-004-042AV MUR Upper Receiver, 3A191M57 � � � � $ 199.99#100-011-160AV MUR Upper Receiver w/o Fwd

Assist, 3A167I89 � � � � � � � � � � � � � � � � � � 174.99

Stripped, small pin, semi-auto lower receiver is preci-sion machined from a durable, 7075 T6 aluminum forging . Stamped “Cal Multi,” this versatile mil-spec receiver can be the foundation for rifle builds on 5 .56/ .223, 6 .5mm, 6 .8mm, 300 AAC Blackout, 9mm Luger, or other chamber-ings that fit the standard AR-15 receiver . Holes, inletting and pin locations have been cut to final dimensions and accept standard AR-15 magazines and components . Clearly stamped safe/fire switch position indicators ensure that you can easily identify the service state of the rifle . Available with standard hard-anodized finish or extra-hard, long-lasting Cerakote finish . STS model is designed to accept short throw safeties, such as the Battle Arms Ambidextrous Short Throw 45 (#100-009-866), that require the fire position at 45°, 60° or 90° (so it will also work with the standard selector) . abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black (BLK) or Flat Dark Earth (FDE). Also available with Cerakote finish in matte O.D. Green (ODG). Small pin, .154" (3.9mm) hammer/pin holes. .250" (6.3mm) pivot/takedown pin holes. FFL required for purchase.

AERO PRECISION AR-15 GEN2 STRIPPED LOWER RECEIVER

Strong, Basic Mil-Spec Receiver Ready For Your

Next Custom Build

#953-000-018AV AR-15 Stripped Lower Receiver, BLK, 3E65A83 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 72.00

#953-000-019AV AR-15 Stripped Lower Receiver, FDE, 3E88B00 � � � � � � � � � � � � � � � � � � � � � � � � � � 88.00

#100-018-686AV AR-15 Stripped Lower Receiver, ODG Cerakote, 3E80D46 � � � � � � � � � � � � � � � � 88.00

#100-015-248AV STS Stripped Lower Receiver, BLK, 3E75I43 � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.99

V SEVEN WEAPON SYSTEMS AR-15/M16

ENLIGHTENED 2055 UPPER RECEIVERLighter, Stronger, Faster...

More Resistant to Corrosion Than Traditional

Aluminum

Advanced 2055 lithium/aluminum alloy is lighter, stronger, more rigid, and vastly more resistant to corrosion than standard 7075 T6 aluminum . This stripped upper weighs only 5 .8 oz .! Type III hardcoat anodized finish . V Seven recommends all pins, springs, screws,and internal components be installed with a quality lubricat-ing oil/grease . Enlightened 2055 Upper is not compatible with Geis-sele Mk8 rails without minor fitting of the rail to the upper .#100-500-003AV Enlightened Upper Rec'r, 7G00BTH� � � $ 338.53

Uniquely-sculpted receiver is machined from a solid billet with

extra metal in critical areas for added strength . Receiver comes with ejection port cover and forward assist installed, and is compatible with any standard pattern AR lower receiver . Machined with M4 feed cuts for reliable feeding and hardcoat anodized for superior wear resistance . abSPECS: 7075-T6 aluminum, hardcoat anodized, matte black finish. For-ward assist and ejection port cover included.

SEEKINS PRECISION AR-15/M16

UPPER RECEIVERBeefed Up For Extra Strength

#100-011-235AV Upper w/Forward Assist & Door, 8C218L45 � � � � � � � � � � � � � � � � � � � � � � � � $ 227.05

Flattop upper comes with high-end custom features and ac-cessories already installed, ready to snap on the mil-spec lower receiver of your choice . Comes fully assembled with bolt/carrier, charging handle, tactical handguard, gas block, and barrel . Features a free-floated Diamond handguard with uniquely-patterned holes machined between the rails to reduce weight and enhance barrel cooling . Four full-length MIL-STD 1913 Picatinny rails have individu-ally marked slots for quick reference . The handguard bridges the gap to the front of the receiver to form one continuous, uninter-rupted top rail; extends over the low-profile gas block for a smooth, streamlined appearance . Specter Upper features Specter-length handguard; Specter XL Upper features rifle-length handguard . Chrome-lined, 16" barrel has a unique diamond-pattern fluting that increases surface area for superior cooling . 1-9" rifling twist works with a wide variety of bullet weights . 5 .56 NATO chamber accepts commercial .223 or mil-spec 5 .56mm ammunition . Also includes a Yankee Hill Phantom 5C2 flash uppressor/compensator, plus YHM-9383 low-profile gas block, YHM-9627 flip-up front sight, and YHM-9680 windage-adjustable flip-up rear sight with A2-style long- and short-range apertures . abSPECS: Receiver – 7075 T6 aluminum alloy, mil-spec Type III hardcoat anodized finish, matte black. Barrel – Chrome-moly vanadium steel alloy, heat treated to Rc 25-32, matte black finish. Chrome-lined. 16" (40.6cm) long. 1-9" ( twist, chambered for 5.56mm NATO. Handguard – 6061 T6 aluminum, hardcoat anodized, matte black. Sights – Steel, Parkerized, matte black. Specter Upper – 4.8 lbs (2.2 kg) wt. Specter XL Upper – 5 lbs (2.3 kg) wt. Fits mil-spec AR-15/M16 lower receiver with .250" pivot/takedown pins.

Complete Flattop Upper With High-End Features

#100-005-754AV Black Diamond Specter Upper Rec’r , 9A823C73 � � � � � � � � � � � � � � � � � � � � � � � � $ 986.99

#100-010-668AV Black Diamond Specter XL Upper Rec’r, 9A901M11 � � � � � � � � � � � � � � � � � � 1090.99

YANKEE HILL MACHINE AR-15/M16

YHM-7810 BLACK DIAMOND SPECTER UPPER RECEIVER

Complete M4-style upper comes fully assembled and ready to install on any mil-spec AR-15/M16/M4 lower receiver . The 6" M4-profile barrel is chambered for military 5 .56x45mm NATO ammo, and has extended M4-style feed ramps in the barrel extension to aid in reliable feeding . Barrel exterior has the cutout for installing a grenade/tear gas/bean bag launcher . Chamber and bore are hard-chromed for superb corrosion resistence . M16-type bolt carrier with extended shroud to trip the auto-sear on full-auto rifles . F-marked A2 front sight base . All critical components, incuding barrel and bolt, are individually high pressure tested (HPT) and then individually magnetic particle inspected (MPI) to ensure integrity . abSPECS: Receiver - CNC Machined from a 7075 T6 MIL-H-6088 forg-ing, with MIL-A-8625F Type III Class 2 hardcoat anodized finish, matte black. .250" pivot/takedown pin holes. Barrel - MIL-B-11595E chromoly vanadium alloy steel, Parkerized finish, matte black. 1-7" twist rifle. Carrier - 8620 tool steel, MIL-STD-171 phosphate coated. Bolt - CNC machined Carpenter 158 steel, MIL-STD-171 phosphate coated.

Complete “Top Half” Ready To Snap Onto The Lower Of Your Choice

#100-006-994AV M4 Complete Upper Assy, 3B490D25 � � $ 580.99

Recoil BufferIncluded

SPIKE’S TACTICAL

M4 FLATTOP UPPER RECEIVER ASSEMBLYAero Precision’s M4E1

Stripped Lower Receiver delivers the strength and unique looks of a billet machined lower, with the lower cost, lighter weight, and easy parts compatibility of a forged lower . The M4E1 starts as an "enhanced" forging from extra-strong 7075 T6 aluminum that is precision machined to fi-nal dimensions for compatibility with all standard "mil-spec" AR-15 parts . As a bonus, the good-looking M4E1 has a streamlined profile, without the chunky appearance of many milled lowers . This receiver is not quite "stripped ." Extra benefits include an integral trigger-guard, which creates a more rigid, structurally sound receiver than a standard AR-15 lower, and also eliminates the risk of accidentally breaking off a triggerguard tab when working on the rifle . The en-larged triggerguard opening gives extra clearance so you can easily operate the trigger when wearing gloves . The M4E1 comes with an easy-to-install threaded bolt catch roll pin that eliminates the risk of damaging the lower’s finish during installation (OK, you may be able to still do damage, but you’ll have to work hard at it!) . Flared magwell opening facilitates fast, one-shot mag changes . Threaded takedown pin detent recess for easy buffer removal without chas-ing down a flyaway detent! Accepts standard mil-spec AR-15 fire control components, pistol grip, buffer tubes & stocks . Polymer-tipped tensioning screw nestled in the grip tang that you can adjust for a tight, rattle-free fit with the upper receiver . All the benefits of a custom machined lower without the downside! ab


M4E1 STRIPPED LOWER RECEIVER

Strength of a Machined Receiver With Universal Fit

of a Forged Lower

#100-026-146AV M4E1 Stripped Lower Rec’r, Black, 3E75K00 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 79.99

#100-026-148AV M4E1 Stripped Lower Rec’r, FDE, 3E88B96 � � � � � � � � � � � � � � � � � � � � � � � � � � � 95.99

AR

-15/M

16LO

WE

R R

EC

EIV

ER

S

Sub-caliber upper assemblies allow fast and simple conversion of ARs chambered in .223 to 9mm Luger . True, dedicated, complete upper receivers are assembled from military specification compo-nents; includes a Wilson, 1-10 twist barrel, bolt and carrier, charging handle, shell deflector, heat-shield lined handguards, sling swivel, and A1-style flash hider . Additional items not included but required for conversion to 9mm are a 9mm magazine, magazine adapter, action spring, and recoil buffer, sold separately . A2 configuration has A2 adjustable sights regulated for 9mm . A4 unit has flattop re-ceiver that accepts most aftermarket accessories designed to fit a Picatinny rail . abSPECS: Barrel - 4140 steel, blue, matte finish, 16" (40.6cm) long, .725" (18cm) O.D. Receiver - Aluminum, anodized finish, matte black. Designed to fit lower receiver with .25" (6.3mm) diameter takedown pins.


9MM UPPER RECEIVER ASSEMBLY

Easily Convert Your .223 AR Into A Fast-Shooting 9mm

#739-000-012AV A2 9mm Upper Rec., 9C485L27 � � � � $ 590.99#739-000-013AV A4 9mm Upper Rec., 9C534E69 � � � � 630.99

A4

A2

UP

PE

R R

EC

EIV

ER

S

Ready to go, complete upper receiver for those looking to spend more time shooting, less time building . Each receiver is fit-ted with a free-floating M-LOK handguard attached to a 7075-T6 forged aluminum receiver . Barrels have a Melonite finish with a ½"-36 threaded muzzle . Complete assembly includes 9mm bolt and charging handle . Compatible with both Glock and Colt SMG maga-zines, works in conjunction with the Law Tactical Folding Adapter . SD Mod 4 available with a 16 .1" free float barrel, 1-10" twist, 12" M-LOK handguard, and A2 flash hider . Handguards on the SD Mod 5 has an SD HBC 9MM Blast Can installed . The 8 .5" barreled upper has a 10" M-LOK free float handguard, 6" barreled upper has an 8" M-LOK free float handguard . SD Mod 4 4" Upper Receiver has a 4" free float barrel, 1-10 twist, 4" M-LOK handguard, and SD HBC 9MM Blast Can installed . ab

STERN DEFENSE AR-15

COMPLETE 9MM UPPERS

Complete Assembly Gets Your Build Range-Ready Quicker

#100-032-661AV SD MOD 4 Upper Rec'r, 16 .1" Bbl, 9D00KDE � � $ 544.99#100-033-499AV SD MOD 4 Upper Rec'r, 4" Bbl, 9D429A99 � � 429.99#100-032-662AV SD MOD 5 Upper Rec'r, 8 .5" Bbl, 9D00CPI � � 486.99#100-032-663AV SD MOD 5 Upper Rec'r, 6" Bbl, 9D00IRC � � 470.99

MOD 5, 8 .5" Barrel

MOD 4, 16" Barrel

MOD 5, 6" Barrel

AR

-15

/M16


SINCE 1939

Innovative, stripped receiver comes with many advanced fea-tures including an integral trigger guard and a screw-mounted bolt catch to eliminate the need for roll pins as well as a flared mag-well for faster reloads and a reinforced buffer tube area for added strength . An upper tensioning screw is also provided to remove any play between the upper and lower receivers to give the gun a rock-solid feel . “Multi Cal”-marked receiver is machined from a solid billet of 7075 T-6 aluminum and given a Type III, Class II hard anodized finish for maximum wear resistance and durability . abSPECS: 7075 T-6 aluminum, matte black hard anodized finish. Receiver comes with bolt catch screw and upper tensioning screw. No other parts included. Fits standard pattern AR-15 uppers. FFL required for purchase.

Precision-Machined With Advanced Features

#100-012-148AV Lower Receiver, 8C175N37 � � � � � � � � $ 202.99

CROSS MACHINE TOOL AR-15

BILLET LOWER RECEIVER

The Brownells 80% AR-15 Lower Receiver is an unfinished AR receiver that enables hobbyists and home gunsmiths to try their hand at building an AR from the ground up . These 80% AR-15 Lower Receivers are machined entirely from 7075-T6 aluminum forging and even come equipped with the takedown-lug pocket . Features broached magazine well . Compatible with a wide variety of home machining jigs . Can be used with any standard AR-15 upper receiver . This is a 7075 T6 aluminum forging hardcoat anodized, right side is engraved with "SAFE" and "FIRE, unpainted, as is the left side . NO OTHER MARKINGS OR ENGRAVINGS WHATSOEVER . The Brownells 80% AR-15 Lower Receiver can be had unfinished or with a black hardcoat-anodized finish . Returns will not be accepted once the receiver is modified in any way. ab

AR-15

80% LOWER RECEIVERThe Foundation for a Truly "Built from Scratch" AR-15

#100-025-709AV AR-15 80% Lower Receiver, Black, 8G49Q85 � � � � � � � � � � � � � � � � � � � � � � � � $ 49.85

Fully assembled mil-spec lower is ready for the upper that tickles your fan-

cy . Forged from 7075 T6 aluminum alloy, final machined to standard AR-15 specs, then hardcoat anodized (black) and Teflon-coated fantastic lubricity and wear-resistance . All controls, including mil-spec trigger/hammer group, are installed . M4-type, 6-position, adjustable buttstock made of reinforced impact-resistant polymer . Commercial (1 .17" O .D .) buffer tube . FFL required for purchase. ab

DPMS AR-15/M16

COMPLETE LOWER RECEIVERM4-Pattern Lower With Buttstock & ALL Internal Components Installed

#231-000-384AV AR-15 Lower Receiver Complete with M4 Stock Assembly, 3B185F25 � �$ 223.99

LOW

ER

RE

CE

IVE

RS

The core of this lower is a mil-spec 7075 T6 aluminum forging with a tough, wear-resistant MIL-A-8625F, Type III, Class 2 hardcoat anodized finish - but that's just the beginning! You get a BCM mil-spec receiver extension with a USGI H-type buffer (1 tungsten, 2 steel weights) and BCM QD endplate, both clamped down by an M4 lock nut . A BCM triggerguard leaves plenty of room for getting your trigger finger on the trigger quickly . Inside, you'll final an un-notch hammer that is compatible with 9mm Luger chambered uppers, plus a low shelf for RDIAS and Accuwedge installation . Safety selec-tor marked SAFE and SEMI . Choice of standard G .I . M4 carbine stock or enhanced BCMGunfighter buttstock . ab

BRAVO COMPANY AR-15

COMPLETE BCM LOWER RECEIVER + STOCK

Full-Featured, Ready To Be Matched With Your Favorite "Other Half"

#100-018-638AV Complete Lower w/M4 Stock, 8F395F00 � � � � � � � � � � � � � � � � � � � � � � � � $ 395.00

#100-018-639AV Complete Lower w/BCMGunfighter Stock, 8F395F00 � � � � � � � � � � � � � � � � � � 395.00

Stripped lower is the ideal mate for Aero’s M5 upper, plus it’s fully compatible with DPMS-pattern 308 parts, so you can build a

7 .62/ .308 AR from the ground up with maximum versatility in your choice of components . Accepts any magazine that fits the DPMS LR-308 . Integral triggerguard adds extra structural strength . Selec-tor markings function with 45°, 60° or 90° safety selectors . Accepts standard LR-308 safety or Battle Arms Development short-throw safety selectors . Rear takedown pin detent hole has 4-40 threads to allow for a setscrew to retain the takedown pin . Bolt catch is threaded for a screw pin, so that no roll pin is needed . abSPECS: Forged 7075 T6 aluminum, MIL 8625 Type 3 Class 2 harcdcoat anodized, matte black. .2795" dia. pivot and takedown pin holes. FFL required for purchase.

A Solid & Versatile Foundation For Your Next Big Bore AR

#100-015-985AV M5 Stripped .308 Lower Receiver, 3E137M73 � � � � � � � � � � � � � � � � � � � � � � � � $ 148.00


M5 LOWER RECEIVER

Anderson's basic lower is ready for your next custom rifle or pistol build - without a custom

shop price . Forged from military-grade 7075 T6 aluminum, with a standard hardcoat anodized finish for extra surface strength and abrasion-resistance in the field . Manufactured to tolerances that ensure a drop-in fit for all mil-spec lower components . Right side has "SAFE" and "FIRE" selector markings . abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black. .250" dia. pivot/takedown pin holes.

A Good-Quality Mil-Spec Lower At An Unbeatable Price

#100-016-811AV Stripped Lower Receiver, 7F42G08 � � $ 53.99

ANDERSON MANUFACTURING AR-15/M16

STRIPPED LOWER RECEIVER

Make your rifle BAD to the bone! Battle Arms De-velopment's lightweight matching receiver set gives you all the strength benefits of receivers machined from billet aluminum, with the component compatibility of a standard forged one . Rather than heavy and blocky like some billet receivers, these are designed to keep weight to a minimum with extra reinforcing metal only in the areas that need it, so your rifle is robust AND maneuverable . After machining, they are de-burred by hand to smooth out the edges and make sure all surfaces mate seamlessly . Fully compatible with standard ("mil-spec") and aftermarket AR-15 parts . Upper has T-marks on the Picatinny rail for easy mounting and dismounting of sights, optics and accessories . Lower has an integral triggerguard for extra strength, a flared magwell for snappy fast mag changes, and pictograph markings for 90° safety . Also accepts a BAD-ASS Short Throw Selector (sold separately) . Captured rear takedown pin detent spring won't fall out and get lost . FFL required to purchase lower receiver and set. abSPECS: 7075 T6 aluminum billet, hardcoat anodized, matte black finish.

BATTLE ARMS DEVELOPMENT

AR-15/M16 BAD-556 LIGHTWEIGHT BILLET RECEIVER SET

#100-016-158AV Ltwt Billet Rec'r Set, 4E443K50 � � � � � $ 498.99#100-016-156AV Ltwt Billet Upper Receiver Only,

6D213Q40 � � � � � � � � � � � � � � � � � � � � � � � � 246.99#100-016-157AV Ltwt Billet Lower Reciever Only,

4E235Q72 � � � � � � � � � � � � � � � � � � � � � � � � 276.99

Extra Strength Without Extra Weight That Can Slow You Down

Aluminum forging is 80% com-plete and ready for final machining and finishing by the user - you! Can be shipped to non-FFL holders .

Brings an extra dimension to "build your own AR-15" . Operations that need to be completed: fire control/trigger group machin-ing, trigger and hammer pin holes, trigger slot, and safety selector hole . Comes unfinished, or with a matte black anodized finish for those who can drill carefully without scratching the finish! Requires Anderson Receiver Jig, #100-016-684 . May not be returned to Brownells once modified in any way. abSPECS: Forged 7075 T6 aluminum, in the white, or matte black anodized.

FFL-Free Item - Requires Machining To Complete

#100-016-685AV 80% Lower Receiver, Unfinished, 8Z41I44 � � � � � � � � � � � � � � � � � � � � � � � � � $ 56.99

#100-022-698AV 80% Lower Rec'r, Black Anodized, 8Z46M79 � � � � � � � � � � � � � � � � � � � � � � � � 59.99


80% LOWER RECEIVER

Battle Arms has finally done it: developed an integrated lower receiver and stock system for the AR-15 . The built-In PDW stock is only 4 .75" long (extendable an additional 4" from the rear of the re-ceiver) for the ultimate in concealment, while still providing a usable platform for shouldering the firearm . The ultra-compact, self-con-tained recoil buffer system is compatible with standard M16/AR-15 bolt carrier, giving you a the fullest array of options in choosing your upper receiver . And "compact" does not mean sacrificing strength:

BATTLE ARMS DEVELOPMENT AR-15/M16

MONOLITHIC LOWER RECEIVERComplete

Lower, Loaded With Features,

Including Ultra-Compact PDW

Stock

#100-018-166AV AR-15 Monolithic Complete Lower Receiver No Trigger 5.56, 4E899D00 � � � � � � � � � � � � � � � � � � � � � � � � $ 899.00

the entire monolithic unit is machined from high-grade 7075 T6 aluminum for superb strength and durability without adding a ton of weight . Hardened S7 tool steel guide rods keep the stock firmly secured to the receiver, while allowing length-of-pull adjustment, without metal-to-metal contact between rods and receiver that could wear the receiver . Other features: QD sling swivel socket on stock, ambidextrous bolt release and oversized magazine release, ambi 50°/90° safety selector can be mounted with the long lever on either side of the receiver, and a pistol grip that can be set at one of three different grip angles . One thing that's not included is a trigger/hammer assembly, so you can choose the exact type of trigger that suits your shooting needs . FFL required for purchase. ab

The Aero Precision AR-15 Am-bidextrous Lower Receiver gives left-handed shooters an opportu-nity to build a rifle that meets their unique needs without having to rely on the market of right-hand lowers . The Aero Precision AR-15 Ambidex-trous Lower Receiver comes with an ambidextrous bolt catch ensuring that left-handed gun builders can receive full functionality with whatever rifle they build . Designed for 5 .56 NATO uppers . Features black anodized finish . Constructed from aluminum . With exception of the ambidextrous bolt release, the Aero Precision AR-15 Ambidextrous Lower Receiver comes fully stripped, so buyers will need to purchase the other necessary lower parts to complete the assembly . ab

Easy Access for All Operators - Left-Handed, Right-Handed, or

Whichever Hand Is Free

#100-024-790AV Amb. AR-15 Lower Receiver, 3E132F00 � � � � � � � � � � � � � � � � � � � � � � � � � �$ 132.00


AMBIDEXTROUS LOWER RECEIVER

Semi-auto lower receiver lets you build a dedicated 9mm AR that doesn’t look like a conver-sion—because it isn’t . The maga-

zine well is machined to accept only Colt or modified Uzi-style 9mm magazines . Eliminates the need for a separate conversion block and the reliability problems that can result from converting a standard .223/5 .56mm lower with add-on parts . Comes with feed ramp, bolt catch, and ejector all designed for best function with the 9mm pistol cartridge . Plus, the flush-fit mag well gives your gun a clean, unclut-tered look . All holes, inletting, and pin locations have been machined to final dimensions . Add the trigger group, buttstock, and 9mm buffer/spring of your choice . Ideal for use with CMMG Enhanced 9mm Bolt/Carrier assembly, available separately . Machined from high-grade 7075 T6 aluminum billet that provides superb strength and rigidity . Hardcoat anodized, then Teflon® coated for excellent resistance to scuffs, scratches, surface abrasion, and discoloration from cleaning solvents and gun oils . abSPECS: 7075 T6 aluminum, hardcoat anodized, Teflon coated, matte black. .250" diameter pivot/takedown pin holes. FFL required for purchase.

CMMG AR-15/M16

DEDICATED 9MM LOWER RECEIVERIntegral 9mm Magwell

Requires No Conversion Block

#100-004-879AV 9mm Lower Receiver, 3B173B38 � � � $ 188.99

AR

-15/M

16


brownells.com

Made of tough, reinforced polymer, this lower comes 80% complete, with the necessary jig and instructions for final machining into a finished AR lower . Because it is incomplete, an FFL is not required for purchase . Reinforced areas around magwell, bolt release, and interface points with upper receiver give added strength and durability . Built-in triggerguard simplifies assembly and enhances structural strength . AR-15 - threads for buffer tube, bolt release cavity, and rear pivot pin hole accept standard mil-spec AR-15 parts . AR-308 accepts components that fit a DPMS LR-308 lower . May not be returned to Brownells once modified in any way. ab

JAMES MADISON TACTICAL AR-15/AR-308

80% POLYMER GEN2 LOWER RECEIVERComplete The Lower For Your Next

Build At Home

#100-014-622AV AR-15 80% Lower Rec'r, 6B85A74 � � � $ 97.99#100-017-979AV AR-308 80% Lower Rec'r, 6B119C73 � � 145.99

Who says all AR-15 receivers have to look alike? F-1 rethought the whole design from the ground up, got rid of a bunch of extra metal - and weight! - without sacrificing strength . Hand-finished for perfect fit to help you wring out every last MOA of accuracy . Oversized triggerguard, 60° beveled magwell, plus pivot/takedown pins installed . Includes adjustment screws for bolt catch, re-ceiver tensioning, take-down pin detent and trigger for a tight custom fit . Matte black hard-anodized finish . FFL required for purchase. ab

F-1 FIREARMS AR-15/M16

BDR-15 RECEIVER SETLooks Unlike Any Other Lower Out

There - Strong & Reliable

#100-020-541AV AR-15 Skeletonized Receiver Set, 7B498N00 � � � � � � � � � � � � � � � � � � � � � � � � $ 525.00

The FM-9 Ready-to-Customize 9mm Lower Receiver is designed from the ground up specifically for 9mm AR-15 conversions . It’s NOT just a standard AR-15 receiver with just a smaller mag-

well, but a purpose-built lower with many enhancements just for pistol caliber AR shooters . It uses Glock® pistol magazines, which are extremely reliable and readily available (especially if you already own a 9mm Glock® or two) . And the FM-9 lets you carry TWO mags on the gun - one in the magwell and a backup stored in the pistol grip . That next reload is always right under your hand! The release button to drop the reserve mag is positioned exactly where you find the button on a Glock® pistol . FM Products manufactures the FM-9 RTC from firearm-grade reinforced molded polymer with a 7075 T6 aluminum insert that supports the stress points . It’s so strong the buf-fer tube attachment point will support 1,600 lbs .! The molded poly-mer construction allows for a unique external shape with enhanced ergonomics that make the FM-9 extremely comfortable - and in-tuitive - to operate . Integral triggerguard adds structural strength . Oversized triggerguard eases operation when wearing gloves . Bolt stays open after last round . Titanium hammer, trigger, pivot and take-down pins . The FM-9 9mm lower is totally ambidextrous . The safety selector, bolt release, primary mag release, and even the reserve mag release ALL have ambidextrous controls . The FM-9 comes with all of these control installed; you just add the trigger group and receiver extension / 9mm buffer / stock of your choice . Recommended trig-gers: FM Products GI Style AR-15 Trigger Group (#100-026-159) or Match Grade Competition Trigger Group (#100-026-160), both available separately . FFL required for purchase. ab

FM PRODUCTS AR-15

FM-9 RTC 9MM LOWER RECEIVERAt Last! A Truly Dedicated 9mm Lower With Enhanced Features

#100-026-162AV FM-9 RTC Lower Rec'r, 6D143D99 � � $ 143.99

LOW

ER

RE

CE

IVE

RS

Designed to give you greater latitude in custom-ization, these FM-9 Lower Receivers are an ideal base for your next pistol caliber build . Machined from 7075 T6 aluminum, with mil-spec hardcoat anodizing, these premium lower receivers come with FM's proprietary last-round bolt-hold open, a stainless steel recoil spring, and full compatibility with 9mm Glock®-style magazines . The Pistol Lower includes lower parts kit with no MIM parts, GI trig-ger group, and a 6 .5 oz . heavy buffer . Rifle Lower adds to the Pistol lower's features a 6-position mil-spec M4 carbine buffer tube ready for the carbine stock of your choice . Premium Pistol Lower boasts an FM Products trigger group made from A2 tool steel with a nickel Teflon coating, adjustable proprietary trigger, 1 .12" O .D . pistol-type buffer tube, ambidextrous safety, 6 .5 oz . heavy buffer with Tungsten weights, and QD end plate . Premium Rifle Lower also has an FM trigger group with A2 tool steel contact parts with a nickel Teflon coating, adjustable proprietary trigger, ambidextrous safety, 6-posi-tion, mil-spec carbine buffer tube, 8 oz . heavy buffer with Tungsten weights, and an endplate with QD sling swivel socket . ab

FM PRODUCTS AR-15

9MM BILLET LOWER RECEIVERSTake Your PCC Build to the

Next Level in Looks AND Performance

#100-035-372AV FM-9 Complete Pistol Lower Receiver, 6D199D00 � � � � � � � � � � � � � � $ 199.00

#100-035-373AV FM-9 Complete Rifle Lower Receiver, 6D199N00 � � � � � � � � � � � � � � 199.00

#100-035-374AV FM-9 Premium Pistol Lower Receiver, 6D299G00 � � � � � � � � � � � � � � 299.00

#100-035-375AV FM-9 Premium Rifle Lower Receiver, 6D299I00 � � � � � � � � � � � � � � � � � � � � � � � � 299.00

#100-027-987AV Stripped FM-9 Billet Lower Receiver, 6D159D00 � � � � � � � � � � � � � � � � � � � � � � � � 159.00

Ready to try your hand a build-ing a custom AR-15, tailored to your wants? Forged from high-strength, 7075-T6 aluminum, with a hard coat anodized finish, the Defender Stripped Lower Receiver is made to mil-spec dimensions for precise fit and outstanding performance . Final-machined to be fully compatible with mil-spec lower parts so you can customize it to your liking . ab

LEWIS MACHINE & TOOL (LMT) AR-15

STRIPPED DEFENDER LOWER RECEIVER

Build Your Own Tack Driving AR-15 From The Ground Up

#100-030-180AV Defender Stripped Lower Rec'r, 4A149B00 � � � � � � � � � � � � � � � � � � � � � � � � $ 149.00

Originating from the design process for the New Zealand Army's standard battle rifle, this lower is ful-ly ambidextrous with controls positioned to be as similar as possible to its companion on the other side . The left side magazine release is placed in a comfortable place, yet out of the way when your finger is off the trigger, while the standard bolt stop, safety and mag release are slightly lower than those on the right side . Rounding out the lower is LMT’s excellent two-stage trigger, extended triggerguard, rubber pistol grip, and collapsible SOPMOD stock installed on a mil-spec buffer tube . ab

LEWIS MACHINE & TOOL (LMT) AR-15/M16

MARS-L COMPLETE LOWER RECEIVER

Ambidextrous Controls Mirror Each Other On Both Sides

#100-030-181AV MARS-L Complete Lower Rec'r, 4A770G10 � � � � � � � � � � � � � � � � � � � � � � � � $ 879.00

With the 308 MWS lower receiver you get a solid foun-dation for a building a rifle in .308 Winchester, 6 .5 Creedmoor, or other calibers compatible with a 7 .62x51 lower receiver . Forged from 7075 T6 aluminum, with a heavy-duty hardcoat anodized finish for long lasting wear resis-tance . It has cutouts for the LMT ambidextrous magazine release, and holes for mil-spec .154" trigger pins . Pictograph "Safe" and "Fire" symbols are engraved on both sides to accommodate ambidextrous safeties . The 308 MWS lower comes with LMT’s two-stage trigger group, ergonomically textured pistol grip, QD socket endplate, and SOPMOD buttstock . This is an SR-25 pattern lower receiver, com-patible with LMT and Knight’s Armament upper receivers . Will not work with DPMS pattern upper receivers . ab

LEWIS MACHINE & TOOL (LMT) AR-308

MWS LOWER RECEIVERA Great Starting Point For

Your Next AR-Style .308 Build

#100-030-182AV MWS Stripped Lower Rec'r, 4A399E00 � � � � � � � � � � � � � � � � � � � � � � � � $ 399.00

#100-030-183AV MWS Complete Lower Rec'r, 4A899Q00 � � � � � � � � � � � � � � � � � � � � � � � 899.00

Receiver kit everything needed to start your next build . Lower receiver is constructed from a single block of proprietary polymer composite with a solid core design, stiffened magwell and beefier buffer tube hous-ing . These lower receivers are 80% finished and require final milling of the fire control group, trigger pin, hammer pin, trigger slot, and safety selector . The included jig system provides an insert for trigger hole drilling, and also includes the necessary drill bits plus end mill bit to finish your lower . Because the receiver is incomplete, an FFL is not required for purchase . May not be returned to Brownells once modified in any way. abSPECS: Nylon polymer, black. Jig – Polymer, red. Includes bits and Al-len wrench.

No Expensive Jig Or Extra Parts To Purchase

#100-016-996AV 80% Polymer Lower Receiver & Jig Kit, 9D59K39 � � � � � � � � � � � � � � � � � � � � � � � $ 77.99

POLYMER80 AR-15/M16

80% POLYMER LOWER RECEIVER & JIG KIT

The Matrix Arms 80% Forged AR-15 Lower Receiver takes the DIY

AR build to the next level for the dedicated AR owner, giving them the chance to machine out the interior pocket themselves for the ultimate AR project . Includes all of the exterior machining done for you and only needs the interior pocket for the hammer and trigger machined in order to make it a fully functioning lower .

Forged from 7075-T6 aluminum, available Unfinished or with matte black Hardcoat Anodized finish . Tools needed: mill/drill press, 3/8" drill, 5/16" drill, 5/32" drill, 3/8" end mill, X-acto knife or similar tool . Use Anderson Manufacturing jib (#100-016-684, sold sepa-rately) . Does not have to be shipped to an FFL dealer . Stamped with "S & F" on both sides . Matrix's 80% lower also features a take-down lug pocket and is a great way to take on an advanced AR build . May not be returned if receiver is altered in any way. ab

An AR Lower Shipped Straight to Your Front Door

#100-025-580AV 80% Lower Rec'r, Anodized, 9D40A72 � �$ 49.85#100-025-581AV 80% Lower Rec'r, Unfinished, 9D40A60 � � 46.85

MATRIX ARMS AR-15

80% LOWER RECEIVER

Purpose-built to be the perfect starting point for a high-quality rifle, Knight's IWS lower receiver is loaded with some of the best features avail-able in today's AR world . Forged from solid aluminum with a hard-anodized finish, this lower is built to last! Fully ambidextrous safety selector, magazine release, and bolt release, plus a 4 .5 lb . two-stage match trigger . Each lower comes with an LMT SOPMOD stock . The SR-15 Complete Lower is caliber-marked for 5 .56 NATO and includes a six-position buffer tube . SR-15 Stripped Lower is designed to ac-cept all standard mil-spec lower parts kits . This lower is not ambi-dextrous . The SR-30 Complete Lower Receiver is caliber-marked for .300 AAC Blackout . ab

KNIGHT'S ARMAMENT AR-15/AR-308

SR-15/SR-30 LOWER RECEIVERSAll The Elements for Constructing

Your Next Go-To Rifle

#100-027-982AV SR-15 Complete Lower Rec'r, 4C856J99 � � $ 856.99#100-027-983AV SR-30 Complete Lower Rec'r, 4C00HKL � � 856.99#100-030-465AV SR-15 Stripped Lower Rec'r, 4C210P00 � � 210.00

The CAV-15 polymer lower is constructed of two pieces of in-jection molded polymer that are friction welded together for in-credible strength . As its designation indicates, it is based on - but much improved upon - the old Cav Arms polymer lower, much missed by folks who like to keep their ARs lightweight . Since since the lower receiver, fixed stock, pistol grip, trigger guard, and buffer tube are all formed into one solid unit, there are no weak points for fracturing like on traditional aluminum lowers . Works with standard AR-15 parts . Comfortable pistol grip has light pebbled texturing and a subtle shelf for parking your thumb . Large integrated triggerguard for gloved hand operation . MKII Stripped Lower has an integral A1-length fixed stocked . MKIII Lower is based on the M16A2 platform and adds to the MKII's feature set multiple QD sling swivel sockets and internal fluting in the buffer tube that helps clear debris when working in a dusty/dirty environment . MKIV Lower comes with an eight position adjustable stock, plus integrated single point sling mount . All available in Black (BLK), Flat Dark Earth (FDE), and O .D . Green (ODG) . ab

MK III Lower w/Fixed Stock (rest of rifle not included!)

#100-035-589AV CAV-15 MKII Lower, Blk, 1G127L20 � � �$ 139.00#100-035-590AV CAV-15 MKII Lower, FDE, 1G127N20 � � 139.00#100-035-591AV CAV-15 MKII Lower, ODG, 1G127J20 � � 139.00#100-035-595AV CAV-15 MKIII Lower, Blk, 1G127L20 � � 139.00#100-035-596AV CAV-15 MKIII Lower, FDE, 1G127K20 � � 139.00#100-035-597AV CAV-15 MK III Lower, ODG, 1G127B20 � � 139.00

GWACS ARMORY AR-15

CAV-15 POLYMER LOWER RECEIVER

As Strong as Aluminum With Less Weight

#100-035-592AV CAV-15 MKIV Lower w/Adj. Stock, Blk, 1G152Q85 � � � � � � � � � � � � � � � � � � � � � 169.00

#100-035-593AV CAV-15 MKIV Lower w/Adj. Stock, FDE, 1G152M85 � � � � � � � � � � � � � � � � � � � � 169.00

#100-035-594AV CAV-15 MKIV Lower w/Adj. Stock, ODG, 1G152N85 � � � � � � � � � � � � � � � � � � � 169.00

AR

-15

/M16


SINCE 1939

RE

TR

O R

IFLE

™ P

AR

TS

Designed to meet the needs of the tactical shooter, this unique lower receiver comes with an ambidextrous bolt release to aid in fast reloads, plus

an oversized, integral triggerguard with extra clearance for a shooter wearing gloves . A beveled mag well helps you get a fresh magazine - mil-spec, Magpul® PMAG®, even a Surefire ultra-high-cap mag - locked in quickly, without fumbling . An upper tensioning setscrew and a trigger reset screw are included to optimize performance, and all roll pins have been replaced with screw-in dowel pins for strength and ease of maintenance . Bullet pictogram selector markings give you fast recognition of status under stress, and deep-ridge texturing on the front of the magwell helps shooters who use a high-and-close support hand hold . abSPECS: Machined from 7075 T6 aluminum billet, Type III Class 2 hardcoat anodized, matte black. Includes ambidextrous bolt release, tensioning setscrew, and trigger setscrew. Accepts all standard mil-spec AR-15/M16 components and upper receiver. FFL required for purchase.

Machined From Billet With High-End Custom Features For Superb

Performance

#100-011-234AV SP223 Lower Receiver, 6B239M26 � � $ 249.99


SP223 LOWER RECEIVER

Inspired by nose art on World War II fighter planes and bomb-ers, the Sharps Bros . Gen 2 Lower Receivers let you express your individuality through your AR . Forged from 7075 T6 aluminum, the lowers sport aggressive, skeletonized styling on the front of the magwell that is not only eye-catching, but helps reduce weight by removing excess material . These Gen 2 lowers are loaded with a number of benefits, like beveled magazine well that aid in rapid reloads, oversized triggerguards for easy access even with gloved hands, and a threaded bolt catch pin . These lowers are compatible with "mil-spec" AR-15 internal components and mate up with any standard AR-15 upper . Accepts all standard AR-15 magazines . The Hellbreaker is inspired by the legendary Flying Tigers of World War II, while the Warthog is based on the iconic A-10 Warthog, and The Jack, with its grinning skull, stands as a warning to anyone who messes with you . ab

Make Your AR Stand Out From ANY Crowd

#100-027-167AV Hellbreaker Lower Rec'r, 1B269F95 � $ 269.95#100-027-169AV Warthog Lower Rec'r, 1B279A95 � � � 279.95#100-027-170AV "The Jack" Lower Rec'r, 1B289E95 � � 289.95

SHARPS BROS. AR-15

GEN 2 LOWER RECEIVER

The JackWarthogHellbreaker

Semi-auto lower re-ceiver is machined from a 7075 T6 aluminum forging to mil-spec dimensions for precise fit and outstanding performance . Rugge-dized hardcoat anodized finish resists scuffs, scratches, and wear . Stamped and color-coded bullet selector position markings notify operator when weapon is in “safe” or “semi-auto .” A “full-auto” po-sition is not selectable but gives this semi-auto lower receiver the appearance of being multi-burst capable . Magazine well features Spike’s spider logo and multi-cal engraving . Complete Lower w/Buttstock includes stainless steel trigger, black oxide finished trig-gerguard and hammer assembly, pistol grip, six-position mil-spec buffer tube (1 .146" O .D .), ST-T2 tungsten heavy buffer, mil-spec 17-4 stainless steel buffer spring, and Spike’s M4 stock . Complete Lower w/o Buttstock includes trigger/hammer group and all other internal components ready for the receiver extension and buttstock of your choice . Stripped Lower - comes without trigger group, mag release, selector, or bolt release; available with color selector markings or plain black . abSPECS: Receiver - 7075 T6 aluminum, hardcoat anodized, matte black finish. Buttstock – Reinforced molded polymer, black. .154" hammer/trig-ger pin holes. .250" takedown/pivot pin holes. FFL required for purchase.

SPIKE’S TACTICAL AR-15

LOWER RECEIVERHigh-Quality Forgings Machined to Mil-Spec

Dimensions; Stripped & Assembled Models

#100-004-686AV Complete AR-15 Lower Receiver w/Buttstock, 3H264A67 � � � � � � � � � � � � � $ 285.99

#100-004-687AV Complete AR-15 Lower Receiver w/o Buttstock, 3H189M93 � � � � � � � � � 233.99

#100-004-685AV Stripped AR-15 Lower w/Color Markings, 3H90J10 � � � � � � � � � � � � � � � 101.99

#100-011-369AV Stripped AR-15 Lower, No Color Markings, 3H84D04 � � � � � � � � � � � � � � � 103.99

V Seven's Enlightened stripped receivers are among the lightest-weight lowers available anywhere .

They are machined from billet material but do not have the blocky look of some billet receivers . Available in 7075 T6 aluminum, which is significantly stronger than commonly used 6061 OR in 2055 lithi-

Unique Alloys for Minimal Weight, Billet Machined

For Strength

#100-500-002AV 2055 Enlightened Lower Receiver, 7G00CJM � � � � � � � � � � � � � � � � � � � � � � � � $ 348.23

#100-500-001AV 7075 Enlightened Lower Receiver, 7G241Q53 � � � � � � � � � � � � � � � � � � � � � � � � 241.53

V SEVEN WEAPON SYSTEMS AR-15

ENLIGHTENED LOWER RECEIVER um/aluminum alloy that is even lighter (6 .4 oz . vs . 6 .8 oz .), stronger, more rigid, and even more impervious to corrosion . Both come with a 7075 endplate that has a handy quick-detach sling attachment point, and both have a durable, matte black Type III hardcoat anod-ized finish . A big, squared-out, integral triggerguard adds to overall strength . V Seven recommends that all pins, springs, screws, and components be installed with a quality lubricating oil/grease . FFL required for purchase.

LOW

ER

RE

CE

IVE

RS

Another in Brownells Retro Rifle line of AR-15 components, this unique receiver features the correct carry-handle contours for Canadian

C7 clones or the Colt Model 723 used by the military during the "Black Hawk Down" time frame . Each Brownells C7 Stripped Upper Receiver is built with a similar profile to our M16A1 upper receiv-ersincluding a shell deflector and A1 rear-sight housing . It comes completely stripped . Due to its early A1 configuration, it does not have M4 feedramps, but the good news is it accepts with ALL stan-dard mil-spec AR-15 components AND Brownells Retro Rifle™ components . Made of forged 7075 T6 aluminum, each C7 upper is machined to military specifications and then treated with a matte-black, hard-anodized finish .

AR-15/M16

STRIPPED C7 UPPER RECEIVER

Build Your Next Piece of AR-15 History

#078-000-451AV C7 Stripped Upper Rec'r, 8G110D00 � �$ 125.00

Our Slickside upper mirrors the contours of the original, early AR-15 upper receiver . Perfect for your next "Retro" or reproduction build, our upper has the following features specific to the original Slickside:

• Correct early-style carry handle contours

• No shell deflector

• No forward assist

• A1-pattern rear sight housing

With help from the folks at Nodak Spud, this precise match was achieved by starting with 7075 T6 aluminum forgings that already have the proper profile built in . In machining to final dimensions, all points where other parts attach are finished to current mil-spec dimensions, so current-production AR-15 components will fit perfectly . However, note that the Slickside receiver is so period-accurate that it DOES NOT have the M4-type feed ramps found on most current-production AR-15 flattop uppers . After machining, each Slickside gets a durable hardcoat anodized finish, in Matte Gray to match the finish on the original, early-pattern M16 rifles or Matte Black to match modern, current-production lowers, including the black version of our BRN-16A1 lower receiver (sold separately) .

Our AR-15 / M16 Slickside upper is the proper receiver for "Retro-Repros" of the following rifles:

• Original AR-15

• Model 601

• Model 602

• Model 607 Carbine


• Model 610 "XM177" Carbine

• Model 630 GAU-5A Carbine

• Model 649 GAU-5A/A Carbine ab

AR-15

"SLICKSIDE" UPPER RECEIVERCorrect Contours for a "Retro-Repro" Build of an Early AR-15

#078-000-363AV AR-15 Slickside Upper Rec’r, Black, 8G134E99 � � � � � � � � � � � � � � � � � � � � � � � � $ 149.99

#078-000-364AV AR-15 Slickside Upper Rec’r, Gray, 3E134C99 � � � � � � � � � � � � � � � � � � � � � � � � 149.99

Designed in conjunction with Nodak Spud, our M16A1 upper closely replicates the original M16A1 receiver profile . Perfect for a "retro" or reproduction build, our receiver has the original A1 profile: no shell deflector, A1 rear sight housing, and correct carry handle contours . This kind of precise match is only possible by starting with 7075 T6 aluminum forgings that have the proper profile built in . All dimensions where other parts attach are current mil-spec dimensions, so standard AR-15 compo-nents will fit perfectly . Matte Gray hard-anodized finish matches the finish on original rifles . Matte Black fnish matches most mod-ern lowers available today . Both are correct matches to finishes on Brownells BRN-16A1 lower receivers (sold separately) . ab

M16A1 UPPER RECEIVERFinally, A New-Manufactured,

Detail-Correct Upper for a "Period" Build

#080-001-303AV M161A Upper Rec'r, Blk, 8K135Q00 � �$ 150.00#078-000-362AV M16A1 Upper Rec'r, Gray, 3E135A00 � � 150.00

Our XM16E1 lower is a replica of the receiver on the original XM16E1 rifles developed for the U .S . Army in the 1960s . We worked with the folks

at Nodak Spud to produce a receiver that replicates the exact con-tours and "partial fence" configuration of the original XM16E1, mak-ing it perfect for a Retro build replicating the early Army M16s . The original XM16E1 lower receiver was developed for the "improved" M16 rifles produced by Colt Manufacturing for the U .S . Army from 1964 through 1967 . These receivers were found on the first M16 rifles issued to the troops in Vietnam, before the arrival of the M16A1 . XM16E1 lowers were used on the first M16s with the forward assist, as well as various early M16 carbines .

Features specific to the Brownells XBRN16E1 lower that make it a close replica of the originals include the proper front takedown lug profile and the contour of the metal surrounding the receiver extension . Also, the XM16E1 lower was the first with the "partial fence" above the magazine release and just below the ejection port cover . Most forged AR-15 "carry handle" lower receivers produced today have the A2 profile, which is incorrect for reproductions of early M16 rifles .

Each of our XM16E1 lower receivers starts life as a 7075 T6 alumi-num forging that is precision-machined to final dimensions before receiving a gray hardcoat anodized finish that gives the best match to the color of the originals . Current-production AR-15 compo-nents will work perfectly with the Brownells XM16E1 lower receiver . FFL required for purchase.

This XM16E1 lower is the correct receiver for building reproduc-tions of the following rifles:

• XM16E1

• Model 604


• Model 606


• Model 608 Survival Carbine

• Model 609 "XM177E1" Carbine

• Model 610 "XM177" Carbine ab

Correct Lower for Replicas of Early U.S. Army M16 Rifles

#078-000-415AV XM16E1 Lower Rec'r, Black, 3E134B99 � � � � � � � � � � � � � � � � � � � � � � � � $ 149.99

#078-000-360AV XM16E1 Lower Rec'r, Gray, 8G134I99 � � � � � � � � � � � � � � � � � � � � � � � � � 149.99

AR-15/M16

XM16E1 LOWER RECEIVER

AR

-15/M

16


brownells.com

RE

TR

O R

IFLE™

PA

RT

S

Designed in conjunction with Nodak Spud, our BRN-16A1TM lower replicates the exact contours of the original military M16A1 receiver, making it perfect for a "retro" or re-

production build . Current-production forged lower receivers have the A2 profile, which is incorrect for the original M16A1, but ours has the proper A1 front takedown lug profile and correct contours around the receiver extension . Manufactured using the latest tech-nology from a 7075 T6 aluminum forging and machined to current mil-spec dimensions for proper fit, so currently available standard AR-15 components will work perfectly with this lower . Engraved markings: "Model: BRN-16A1", "Cal: 5 .56mm" and "Mfg: Brownells Inc ." Proper receiver for the following reproduction builds: M16A1, Mk 12, Mk 18 Mod 0, and Models 619, 629, 630/GAU-5A, 639, 649/GAU-5A/A, 651/652 and 653/654 . FFL required for purchase. ab

AR-15

BRN-16A1TM LOWER RECEIVER

#080-001-304AV BRN-16A1 Lower Rec'r, Blk, 3E133M59 � � � � � � � � � � � � � � � � � � � � � � � � $ 150.00

#078-000-361AV BRN-16A1 Lower Rec'r, Gray, 3E135E00 � � � � � � � � � � � � � � � � � � � � � � � � 150.00

Correct Detail for 1960s/70s AR Replica Builds - Or Just To Have A Nonconformist AR!

Our BRN-601 is a replica of the lower receiver of the very first Colt AR-15, the Model 601 . Designed in conjunction with the folks at Nodak Spud, our receiver precisely mirrors the features and "slab-side" profile of the original . As a result, our BRN-601 lower is perfect for a "Retro" or reproduction build of a very early AR-15 . Each BRN-601 lower receiver starts life as a 7075 T6 aluminum forging that is then machined to final dimensions . The machined lower then gets a gray hardcoat anodized finish that’s an excellent match to the color of the originals . Standard, current-production AR-15 components will work perfectly with the BRN-601, with the exception of the front takedown pin . Features of the Brownells BRN-601 lower receiver that make it a close replica of the original 601 include the front takedown lug profile and area surrounding the receiver extension . This lower has a distinctive "slab side" contour on the right-hand side of the magazine well, with no "fence" around the magazine release . Most forged AR-15 "carry handle" lower receivers produced today have the A2 profile, which is incorrect for reproduc-tions of the early rifles .

The BRN-601 lower is the proper receiver for building reproduc-tion of the following rifles:

• Model 601 (early AR-15 “Air Force” rifles)

• Model 602

• Early prototype AR-15 rifles

This receiver so accurately replicates the original that you must use our special Model 601 Pivot Pin (#078-000-372, sold sepa-rately) . FFL required for purchase.

NOTE: The original Model 601 lower receiver was found on early AR-15 rifles produced by Colt Manufacturing from 1959 through 1963 . These receivers were used on the first rifles issued to the Air Force - and those tested by the U .S . Army . The production numbers of original rifles with this type of receiver are quite low, making the BRN-601 an excellent base for a very unique "Retro" build . ab

AR-15/M16

BRN-601 LOWER RECEIVERDetail-Accurate Replica of Lower

on Very Early AR Rifles

#078-000-414AV BRN-601 Lower Rec’r, Black, 3E134N99 � � � � � � � � � � � � � � � � � � � � � � � � �$ 149.99

#078-000-359AV BRN-601 Lower Rec’r, Gray, 8G97H24 � � � � � � � � � � � � � � � � � � � � � � � � � � 149.99

Step into the Wayback Machine and go back to the early years of the AR-15/M16 platform with our faithful replicas of the upper receivers from early ARs . If you're an AR-15 aficionado or collec-tor, you need to build yourself a Retro Rifle™ . It's easy when you match one of our replica lower receivers with one of these com-plete, ready-to-install upper receiver assemblies . Each model is a carefully researched, detail-correct replica, in some cases sourced off original drawings . All complete Retro Rifle™ uppers are manu-factured from all-new components, with forged/machined 7075 T6 aluminum receivers that have a hardcoat anodized finish that's as close as we can get it to the originals . They are all chambered for modern 5 .56x45mm NATO ( .223 Remington compatible) and come with an M16-type bolt/carrier group with extended carrier shroud for auto-sear . Barrels have a modern chrome-lined bore and chamber for extra corrosion resistance . Get yourself a piece of history - fresh from the factory and ready to shoot! ab

We offer the XBRN177E2 upper with these barrel options: a 12 .7" barrel with 1-12" rifling that's excellent for lighter-weight bullets such as the 55 grain M193 . Or get a 1-7" twist that works well with the heavier bullets favored by many modern-day AR-15 shooters . You can also get an 11 .5" barrel with 1-12" rifling . All three barrels come with a replica of the XM177E2's "moderator" muzzle device with grenade launcher ring . On the 12 .7" barrels, it is pinned and welded in place to meet NFA minimum barrel length require-ments . The 11 .5" barrel's moderator is NOT permanently attached, allowing for use in an SBR or pistol build (all NFA rules apply) .

Fully assembled and ready to attach to the lower receiver of your choice, the Brownells XBRN177E2 Complete Upper Receiver will have you wanting to build your own Vietnam Era carbine di

di mau! #078-000-475AV XM177E2 Upper Rec'r, 12 .7" Bbl/1-12"

Twist , 3E661H06 � � � � � � � � � � � � � � � � � $ 699.99#078-000-477AV XM177E2 Upper Rec'r, 12 .7" Bbl/1-7"

Twist , 3E661F06 � � � � � � � � � � � � � � � � � � 699.99#078-000-476AV XM177E2 Upper Rec'r ,11 .5" Bbl/1-12"

Twist/Unpinned, 3E653P48 � � � � � � � � � 699.99

BRN16A1™ - So authentic you can smell the elephant grass! The Brownells BRN16A1 Com-plete Upper Re-ceiver Assembly enables you to build your own replica of the M16A1 - the rifle that symbolized the Vietnam War era and changed firearm history . The M16A1 was the standard-issue, production rifle used through some of the heaviest periods of ground combat in the war . It incorpo-rated the improvements developed through field testing of the original M16 and XM16E1 rifles, and it was in production from 1967 through 1982 .

The BRN16A1 upper is fitted with a replica of the standard trian-gle cross-section handguard made from black reinforced molded polymer that is much stronger than the original rifle's fiberglass . It is fitted with a forward assist and has A1-type sights . Of course, the BRN16A1 has the "skinny"-profile M16A1 barrel, capped with the correct A1 "birdcage" flash suppressor that replaced the early 3-prong design that tended to snag on vegetation - a serious prob-lem in the lush jungles of Vietnam .

You can get your BRN16A1 complete upper with the original's 1-12" rifling - ideal for M193 55 grain ammo - or the faster, current 1-7" twist that plays nicely with modern-day heavier bullet weights . For the full measure of authenticity, you can get your BRN16A1 with an M16-type carrier that has the extended shroud to trip the auto sear on full-auto/burst rifles; it's compatible with semi-auto lower receivers . If you live in a more restrictive jurisdiction, we also offer the BRN16A1 upper with a semi-auto carrier (a cutout on the shroud prevents use in a full-auto rifle) . Other features: dimensioned for compatibility with current mil-spec parts, robust forged-then-machined 7075 T6 aluminum receiver, matte gray hardcoat anodized finish, chambered for modern 5 .56x45mm NATO ( .223 Remington compatible), 20" barrel with choice of 1-7" or 1-12" twist rifling chrome-lined bore & chamber .

Our BRN16A1 Complete Upper Receiver Assembly is built to current standards with mil-spec materials, so it is ready to be a hard-working "shooter," not just a pretty wall-hanger! Whether you're a collector, a reenactor, or just an avid AR-15 / M16 fan and shooter, the BRN16A1 upper gives you the foundation for building

an impressive M16A1 replica .#078-000-472AV BRN16A1 Complete Upper Rec'r,

1-12"/20" Bbl, 3E650D71 � � � � � � � � � � � $ 699.99#078-000-473AV BRN16A1 Complete Upper Rec'r,

1-7"/20" Bbl, 3E650M71 � � � � � � � � � � � � 699.99#078-000-474AV BRN16A1 Complete Semi-Auto

ONLY Upper Rec'r, 1-12"/20" Bbl, 3E650L71 � � � � � � � � � � � � � � � � � � � � � � � � � 699.99

er has the A1 model's forward assist but retains the older-style three-prong flash suppressor . (The classic "bird cage" suppressor would be added to the M16A1 .) It also retains the early model's fully chromed bolt/carrier group and small, triangle-shaped charging handle .

The XBRN16E1 upper also sports the early triangle cross-section handguard in modern reinforced black polymer, so your finished gun will take on the iconic "Black Rifle" look we all know . Other features: built to current standards with modern materials - ready to be a shooter! Robust forged-then-machined 7075 T6 aluminum receiver . Period-correct matte gray hardcoat anodized finish . Chambered for modern 5 .56x45mm NATO ( .223 Remington compatible) . 20" barrel with chrome-lined bore & 1-12" twist rifling . Rifle-length gas system . Windage-adjustable rear sight drum .

A faithful reproduction of the "top half" on Vietnam War Era rifles, the XBRN16E1 complete upper receiver is built from all-new-production parts . Its internal dimensions match present-day mil-spec uppers, so customizing with modern "guts" is easy . But why not mate it up with our XM16E1 lower receiver (#078-000-360) and A1-style buttstock (#078-000-350) to build an accurate Retro Rifle™? Here's a little slice of history that no AR-15 fan should be

without!#078-000-471AV XBRN16E1 Complete Upper Rec'r,

3E649G99 � � � � � � � � � � � � � � � � � � � � � � � � $ 699.99

BRN-605™ - You can easily build your own replica of the very first M16 carbine, or create a truly unique custom build, with the BRN-605 Complete Upper Receiver Assembly . In the history books, the XM177E2 carbine gets all the attention as an early effort at producing a compact variant of the M16 rifle . But it was not the first! That distinction goes to the Colt Model 605 . The 605 is basi-cally a standard M16 with 4 .5" lopped off the end of the A1 barrel . Why only 4 .5"? Because they retained the rifle-length gas tube!

Like the original, our BRN-605 upper assembly is built around our standard M16A1 upper receiver, with a 15 .5" A1 profile barrel capped by the standard 3-prong flash hider of early M16s . The hider is pinned and welded in place so you don't have to contend with NFA short-barreled rifle (SBR) regulations when you purchase a 605 upper . There's a forward assist, but no shell deflector .

The BRN-605's bore and chamber are chrome-lined, and the 1-12" rifling works best with lighter, 55 grain bullets . We recom-mend M193 ammo . Barrel is chambered for modern 5 .56x45mm NATO ammo; .223 Remington will, of course, work too .

With our BRN-605 Complete Upper Receiver Assembly, you can build your own “Number One Carbine” and not go “dinky dau” trying to modify original parts to create a replica . You'll never be able to get your hands on an original Model 605 carbine, but now you can assemble a stand-in at a price so reasonable we can only

ask, "What are you waiting for?"#078-000-478AV BRN-605 Complete Upper Rec'r,

3E633B52 � � � � � � � � � � � � � � � � � � � � � � � � $ 699.99

XBRN177E2™ - For serious AR-15 collectors, one of the most coveted yet nearly impossible to find models is the XM177E2 carbine . Issued to Special Operations forces during the Vietnam War, the XM177E2 had a significantly shorter barrel than the standard-issue M16A1, making it a direct ancestor of the present-day M4 carbine . Now, with our XBRN177E2 Complete Upper Receiver Assembly, you can build your own Retro Rifle™ replica or custom variation of this famous carbine . Like the original, the XBRN177E2 upper is built around our standard A1 "carry handle" rifle receiver . It comes outfitted with a forward assist and A1 rear sight assembly . It has an M16 bolt/carrier group with the extended shroud on the carrier to trip the auto-sear on full-auto/burst rifles (works just fine on semi-auto rifles) . The BCG has a black phosphate finish with a chromed ID area on the carrier .

BRN-601™ - This is a faithful recreation of the upper on the original Colt Model 601 rifle . The 601 was the AR-15 origi-nally issued to the U .S . Air Force that got the ball rolling toward the rifle's adoption by all branches of the U .S . military . The Model 601 and the subsequent Model 602 are essentially identical to the later U .S . Army M16 . The charging handle has been relocated from under the carry handle (on the early Armalite prototypes) to the rear of the receiver . Like the M16, the 601 lacks a forward assist . The only difference be-tween the 601 and 602 is a switch from 1-14" rifling on the 601 to a faster 1-12" twist on the 602 .

When coupled with our BRN-601 lower receiver (#078-000-359) and appropriate buttstock, the BRN-601 upper receiver lets you build a complete replica of these early rifles without dropping big bucks for a scarce-as-hen's-teeth original gun .

The BRN-601 upper has the early rifle's “duckbill” three-prong flash suppressor, chrome-plated bolt/carrier group without ser-rations on the carrier (because there's no forward assist!), and uncluttered "slick-side" exterior . It's got the early, small, triangle-shaped charging handle and a vertical A1-type rear sight windage adjustment drum embedded in the carry handle . The triangle-cross-section handguard is made of reinforced-polymer in the authentic olive green color of the early AR-15s . Other features: robust forged/machined 7075 T6 aluminum receiver, matte gray hardcoat anodized finish (correct color for early rifles), chambered for modern 5 .56x45mm NATO ( .223 Remington compatible), 20" barrel with chrome-lined bore/chamber, 1-12" twist rifling, and a rifle-length gas tube .

The BRN-601 Complete Upper Receiver is constructed from all-new parts - no refurbs or seconds here! It's dimensioned for compatibility with current mil-spec parts, so customizing is easy . And it's built to present-day standards of strength and durability, so the BRN-601 upper is ready to be part of a Retro Rifle™ that spends a lot of time at the range . Drop one on a spare lower and head for the boonies! #078-000-470AV BRN-601 Complete Upper Rec'r,

3E649L99 � � � � � � � � � � � � � � � � � � � � � � � � $ 699.99

XBRN16E1™ - An authentic replica of the receiver on XM16E1 rifles issued to ground troops during the early years of the Vietnam War . The XM16E1 incor-porated the first round of improvements developed as a result of field experience with the original M16 rifle . The XM16E1 changes were eventually finalized into the M16A1, which was in production from 1967 to 1982 . In common with the XM16E1, our XBRN16E1 upper receiv-

AR-15/M16

COMPLETE RIFLETM UPPER RECEIVERS

Back to the Future - Complete & Fully Assembled Top Halves for Your Next Retro Build

AR

-15

/M16


SINCE 1939

Our "Retro" BCG matches the finish of the bolt found on the earliest AR-15 and M16 rifles intro-duced . It includes a bolt machined from 9310 steel, which is mag-netic particle inspected & finished with a slick chrome finish . The carrier is fabricated from 8620 hardened steel and also receives the same, durable chrome application . In addition to the bolt and car-rier, the extractor, gas key and cam pin also are chromed to ensure all moving parts are corrosion resistant and as slick as possible . This BCG will work reliably in any AR-15 chambered in 5 .56x45mm, 300 AAC Blackout or .223 Remington . The perfect complement to a retro build, this BCG is available with or without forward assist serrations . The model without serrations is similar to the original BCG found on early AR-15s, such as the Air Force 601 . The model with serrations could be found on early XM16E1 models in the mid-1960s .

Extractor includes spring and rubber insert . Includes torqued and staked gas key . Complete package: bolt, bolt carrier, gas key, firing pin, cam pin and a firing pin retaining pin . ab

Replicates Appearance Early AR-15 BCGs - Extra Touch of Authenticity for a Retro Build

#078-000-375AV Chrome M16 Bolt/Carrier Group w/Serrations, 8G134B99 � � � � � � � � � � � � � $ 149.99

#078-000-376AV Chrome M16 Bolt/Carrier Group, w/o Serrations, 8G134K99 � � � � � � � � � 149.99

AR-15/M16

CHROMED M16 BOLT/CARRIER GROUP

With Fwd Assist Serrations

With Fwd Assist Serrations

Our BRN-10 Retro BCG is styled to replicate the BCG on Eugene Stoner’s original ArmaLite® AR-10® rifle of the late 1950s - the origi-nal AR-pattern rifle . It is the ideal component to add an extra level of period detail and authenticity to a "retro" rifle build - especially if you’re using the Brownells BRN-10 upper receiver . The carrier has angled flat sides and two enlarged flanges on the tail for flawless travel inside the receiver extension . A hard-chromed finish on the BRN-10 provides excellent resistance to surface wear, plus smooth operating lubricity, while adding an extra bit of period-correct de-tail . Compatible with DPMS LR-308 upper receivers and compo-nents, as well as DPMS clones . It will give a distinctive look to your next custom AR-308 rifle build, yet is fully compatible with modern DPMS-pattern receivers, buffers, charging handles and barrels . ab#078-000-385AV BRN-10 Chrome Bolt/Carrier Group,

6H207E19 � � � � � � � � � � � � � � � � � � � � � � � � $ 229.99

AR-308

BRN-10 BOLT/CARRIER GROUPA Bit of Old-School

Flavor, Plus The Convenience of Modern

Parts Compatibility

With our XM16E1 3-Prong "Duckbill" Flash Hider you can give your early-style retro AR-15 that extra touch of authenticity . The XM16E1 3-Prong Duckbill Flash Hider is found on some of the earliest AR-15 rifles, such as the Colt Model 601 used by the United States Air Force . The prongs on the XM16E1 Duckbill flash hider redirect combustion gases to the sides, reducing temporary blindness caused by the muzzle flash during low-light firing . The original XM16E1 flash hider was eventually phased out by the military due to a tendency of the lightweight prongs to bend . Still looks at home on a Retro rifle or any AR-15 of your choice (just be a little careful not to bend the prongs) . Improved 3-Prong - Developed to replace the original "Duckbill" flash hider due to its tendency to bend and/or break on impact, has reinforced prongs to ensure it stands up to hard use in the field . Correct part for building an accurate replica of the Model 602 or 603 rifle, as well as the XM16E1 issued to the U .S . military during the Vietnam War .

Note: These hiders do not have wrench flats to install . You'll need a strap wrench or three-prong armorer’s wrench to properly install it . The #276-000-024 Blackout flash hider installation tool (sold separately) is helpful in installation . ab

AR-15/M16 EARLY-STYLE

THREE-PRONG FLASH SUPPRESSORSThe Correct "Front End" For a Retro AR-15 Build

XM16E1

#078-000-390AV XM16E1 3-Prong Flash Hider, 8G12P00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 15.00

#078-000-391AV Early 3-Prong AR-15 Flash Hider, 8G26J00 � � � � � � � � � � � � � � � � � � � � � � � � � � 29.00

Early 3-Prong

The BRN-10™ Carbine Barrel enables you to give your BRN-10 Retro Rifle™ a lighter, more compact barrel for faster handling in close quarters . You can swap out your rifle's existing barrel, build a new AR-308 carbine from scratch using a BRN-10™ receiver, OR just install it on a modern AR-308 upper to get a lightweight, ma-neuverable carbine that packs .308 a punch .

It's based on barrels with the original Sudanese-type front sight found on AR-10® rifles produced by the Dutch company Artillerie Inrichtingen under license from Armalite® . It comes with the front sight base installed, along with the barrel nut (fits standard AR-15 wrench), handguard cap, and side-mounted sling swivel, making the barrel swap process easy and fast . Standard 5/8"-24 tpi muzzle threads accept just about any readily available .30 caliber flash hider, compensator, or muzzle brake . We prefer one of our BRN-10™ flash suppressors, either the very early open 3-prong model or the later closed prong model - maybe we're a little biased there . Available in 16" (mid-length gas system) and 18" (rifle gas system) lengths . Forged from extra-hard 4150 carbon steel with a .308 Winchester chamber and 1-10" rifling . Tough anti-corrosion Nitride finish with a Parkerized topcoat for an excellent match to our Retro Rifle™ receivers .

Our BRN-10™ Carbine Barrel is not a historical replica, but in keeping with the AR platform's versatility, it lets you create a unique, practical modern rifle with a period look . What if the AR-10® had been adopted by the U .S . military in 1957, instead of the M14? Now, you can build the future AR-10® carbine that never was! ab

Compact, Lightweight Barrel for Modern & Retro .308 AR Rifles

#078-000-444AV BRN-10 Carbine 18" Bbl, Rifle Gas, 1D00AAG � � � � � � � � � � � � � � � � � � � � � � � � � $ 299.99

#078-000-445AV BRN-10 Carbine 16" Bbl, Mid-Length Gas, 1D00DZJ � � � � � � � � � � � � � � � � � � � � 299.99

AR-STYLE .308

BRN-10™ CARBINEBARREL

Our XM177 flash suppressor replicates the appearance of the original flash/sound "moderator" used on Vietnam War era CAR-15 . It mirrors the original device's exterior dimensions, as well as flash hider cuts and grenade launcher ring . Gives an extra degree of authenticity to a "retro" carbine build . Machined 8620L steel with a period-correct black oxide finish . Fits 1/2"-28 muzzle threads . For appearance only: does not have actual sound suppression capabil-ity . This is the correct muzzle device for the following reproduction builds: XM177 (Colt Model 610), XM177E1 (Colt Model 609), Colt Model 619/620, XM177E2 (Colt Model 629), Colt Model 630 (USAF GAU-5A), Colt Model 639, Colt Model 649 (USAF GAU-5A/A) . abSPECS: 8620L steel, black oxide finish. Flash hider OAL is 4.335". OAL with the grenade ring is 4.45".

AR-15/M16

XM177 FLASH SUPPRESSOR & GRENADE RING

Gives That Authentic Look To Your "Retro" Carbine

#078-000-311AV XM177 Flash Hider & Grenade Ring, 8G44G96� � � � � � � � � � � � � � � � � � � � � � � � � � $ 49.99

The Brownells BRN-10 Flash Hiders are inspired by the two types of flash hider found on early .308 AR-pattern rifles - making them ideal to cap off the business end of your "Retro" battle rifle build . The BRN-10 Open 3-Prong model replicates the hider found on Sudanese and early Dutch .308 ARs, while the Closed 3-Prong model replicates the hider found on many Portuguese and later production Dutch rifles . What’s the difference? The Closed model is more resistant to breaking if the muzzle accidentally strikes a hard surface (hence the change on the originals) . The good news is that either model will give ANY AR-308 rifle a unique appearance - and do an excellent job reducing the fireball coming from the muzzle! They have the standard .30 caliber 5/8"-24 thread pitch . The .320" dia . clearance hole is excellent not just for .308 rifles, but also .243 Winchester, 6 .5mm Creedmoor, etc . Both Brownells BRN-10 Flash Hiders come with a modern-day high-tech QPQ finish that is far more durable than the Parkerized or black oxide finishes of the Old Days, yet replicates the matte black/dark gray shading of the origi-nals . Complete your AR-308 battle rifle build with one today! ab

AR-308

BRN-10™ FLASH SUPPRESSORS

Replicas of Early .308 AR Hiders from the Late 1950s

Dutch

#078-000-393AV BRN-10 Retro 3-Prong Dutch Flash Hider, 1D54A59 � � � � � � � � � � � � � � � � � � � � $ 59.99

#078-000-394AV BRN-10 Retro Closed-Prong Portugese Flash Hider, 1D52F79 � � � � � 59.99

Portugese

Many AR-15 aficionados love Eugene Stoner's revolutionary de-sign and want to build retro models, but a little-known fact about the AR platform is that the earliest rifle models were actually AR-10®s chambered in .308 Winchester . Our original-style BRN-10 barrels are faithful reproduction of the barrels found on the first Armalite® AR-10® rifles produced in the 1950s . We're offering our BRN-10 barrels in two different configurations never seen before on the retro reproduction market . The Fluted model allows builders to construct

#078-000-378AV BRN-10 Lightweight 20" Bbl, 1D298M99 � �$ 329.99#078-000-379AV BRN-10 Fluted 20" Bbl, 1D339P99 � � 369.99

Faithful Reproduction of the Very First Armalite® AR-10® Barrels

Fluted Model

AR-308

BRN-10™ RIFLE BARRELS

reproductions of early test models provided to the U .S . Army in the late 1950s, while the Lightweight-profile model emulates the barrel configuration used on AR-10® rifles sold to the Dutch and Portu-guese militaries . Both barrels are QPQ-nitride coated and feature an accurately colored phosphate exterior finish . The barrels come with a barrel nut, round handguard cap, front sight base, and the necessary front sight hardware . ab

Our BRN-10 Retro Slip Ring replicates the contour of the slip rings used on early M16 rifles, so it’ll add an extra touch of period au-thenticity to your next "retro" AR-style .308 build . Just combine the BRN-10 slip ring with a .308 barrel nut, handguard spring, and snap ring to add the correct handguard retention hardware to your barrel . The "flat" exterior of the Brownells BRN-10 Retro Slip Ring enables the use of non-free-float drop-in handguards on your AR-308 . All-aluminum construction with flat exterior, no taper like modern delta rings . Fits both DPMS LR-308 and Armalite® AR-10® rifles and clones . (Barrel nut, handguard spring, and snap ring not included, available separately .) The BRN-10 Retro Slip Ring is even finished in the cor-rect XM gray anodizing of the 1950s and 1960s . All in all, a "vintage" detail that enhances the vintage feel of a retro Big AR-308 build . ab#078-000-388AV BRN-10 Slip Ring, 3G18J79 � � � � � � � � � $ 19.99

AR-308

BRN-10 RETRO SLIP RINGAn Extra Touch of Retro Authenticity for Your "Vintage" .308 AR

RE

TR

O R

IFLE

™ P

AR

TS

Our "retro" barrels exactly match the contours of the original M16A1 and A2 barrels of the 1960s and '70s, ready to lend an extra touch of authenticity to a retro build . Or install one for extra weight savings on a lightweight carbine, PDW, or pistol . All are machined from 4150 chrome-moly steel, chambered in 5 .56 NATO, MPI in-spected to detect hidden flaws, and given a hard black phosphate finish . Bores are chrome-lined . Muzzle threads are the current ½-28" standard, and on the other end the barrel extension's already installed . That's all you get with the Stripped barrels; an Assembly includes a .625" gas block/front sight base with bayonet lug, sight post, detent, spring, sling swivel, Delta ring, barrel nut, weld spring, snap ring, and triangular handguard cap . A1 barrels are available with both the original, 1-12" rifling and the modern 1-7" twist; A2 models have a 1-7" twist . ab#100-020-999AV M16A1 Bbl Assy, 20"/1-12" Twist, 5A184H44 � �$ 225.99 078-000-464AV M16A1 Bbl Assy, 16"/1-7" Twist, 5A240L39 � � 252.99 078-000-463AV M16A1 Bbl Assy, 14 .7"/1-7" Twist, 5A209H39 � � 221.99 078-000-462AV M16A1 Bbl Assy, 12 .7"/1-7" Twist, 5A211E59 � � 225.99#100-020-996AV M16A1 Bbl Assy, 12 .7"/1-12" Twist, 5A205P59 � � 219.99 078-000-461AV M16A1 Bbl Assy, 11 .5"/1-7" Twist, 5A219M99 � � 234.99 078-000-377AV M16A1 Bbl Assy, 11 .5"/1-12" Twist, 5A219B99 � � 234.99 078-000-460AV M16A1 Bbl Assy, 10 .3"/1-7" Twist, 5A219M99 � � 234.99#100-021-650AV M16A2 Bbl Assy, 20"/1-7" Twist, 5A214D50 � � 235.99#100-021-010AV M16A2 Stripped Bbl, 16"/1-7" Twist, 5A128M69 � � 131.99

AR-15/M16

M16A1/A2-PATTERN BARRELS

Correct Profiles For Early M16 Variants

Sizes

This Retro barrel assembly has the correct A1 contour and length (15 .5") for a replica of the Model 605, Colt’s first attempt at an M16-based carbine . The Model 605 barrel IS a standard A1 rifle tube cut off just ahead of the front sight tower . The nub end was re-threaded, and the A1 rifle flash suppressor was simply reattached! The rest of this "carbine" - buttstock, buffer, gas tube, etc . - remained just as the rifle, so the result is a short (approx . 34" OAL), heavy-set weapon whose pugnacious stance we find kinda cool . If you want to build an ac-curate replica of that first carbine prototype . . . this is the barrel you need . It’s machined from hardened 4150 steel, then MPI inspected to detect hidden flaws (before it ever leaves the factory), and given a hard black phosphate finish similar to the originals of the 1960s . It’s chambered for the modern 5 .56 NATO cartridge, but with the slower 1-12" rifling in the chrome-lined bore . It uses a RIFLE LENGTH gas tube (not included) . Up front, there are standard ½-28" tpi muzzle threads, ready to accept a "retro" flash suppressor or modern muzzle device/sound suppressor . On the other end there’s a standard rifle barrel extension already installed . Also installed: a 625" gas block/front sight base (no F marks & no bayonet lug) with sight post, detent, spring, sling swivel, Delta ring, barrel nut, weld spring, snap ring, and triangular handguard cap . ab

AR-15/M16

BRN-605™ CARBINE BARRELCorrect Barrel for a Replica of the First

M16-Based Carbine

#078-000-465AV BRN-605 Bbl, 15 .5"/1-12" Twist, 5A231C99 � �$ 251.99

AR

-15/M

16


brownells.com

For those fans of the classic retro AR-15 look, Brownells teamed up with Nodak Spud to produce the Brownells Retro AR-15 Triangle Charging Handle . This handle is not an approximation but a care-fully researched, detailed replica of the charging handle found on early, much-sought-after "601" rifles issued to the Air Force in the early 1960s . In fact, to distinguish our reproduction from originals, we had to engrave "BRN" hidden away at the bottom to prevent these from being confused with the genuine article . It features the correct triangle shape like the originals, but also fits and functions correctly in any standard, current-production mil-spec AR-15 up-per receiver . Constructed of high-grade 6061 T6 aluminum, with a "Colt gray" hardcoat anodized finish . If you’re building a 601 replica using our M16A1 upper and lower receivers and reproduction stock/pistol grip/handguard, the Brownells Retro AR-15 Triangle Charging Handle is a must-have component . ab#078-000-373AV Retro 601 Charging Handle,

4C56P99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 59.99

AR-15/M16

601 "TRIANGLE" CHARGING HANDLE

The Perfect Period Detail Piece for Your Retro AR

Our Brownells A1 Ejection Port Cover is an accurately detailed replica of the cover used on M16A1 and earlier rifles that have a cover - basically the Vietnam Era guns . Unlike the standard A2 cover still in use today, the A1 has a smaller, rectangular finger pad with crisp 90 degree edges . On the inner side, an early-style hexagonal housing retains the catch detent and spring, rather than the simpler, easier to manufacture cylindrical housing of the A2 cover . Aside from these physical details, this cover operates and installs just like the covers on modern-day rifles . It's made of stamped steel (not plastic - of course!), with a classic matte dark gray Parkerized finish that's a good match to our Retro Rifle receivers . If you've gone to the effort of building up a nice early Retro Rifle from Brownells parts, why cut corners on the details? The A1 Ejection Port Cover provides that finishing touch of historical accuracy . NOTE: Pin, C-clips & spring NOT included . ab

AR-15/M16

A1 EJECTION PORTCOVER ASSEMBLY

Got You Covered With the Correct Details for Early Rifles

#078-000-467AV Retro A1 Ejection Port Cover, 8G16I25 � � $ 17.99

The delight is in the detail! Our complete Retro Rifles, as well as up-per and lower receiver assemblies, don't just give the general look of

original AR-15/M16s . They are correct down to many small details, and we are pleased to offer these equally detailed "small" parts to folks who are building their Retro Rifles from parts . While we have maintained the period appearance, these parts are manufactured from modern materials for better-than-original strength, reliability, and function . Finishes are formulated to match originals as close as possible, yet also bring modern durability to the mix . BRN-16 Re-ceiver Extension is the correct rifle-type A1 length . BRN-16 Hand-guard Slip Ring/Spring is for use with our Retro Rifle handguards . BRN-16 Triggerguard is correct contour to match early prototypes and Army M16 rifles . BRN-10 action spring and buffer works in BRN-16 receiver extension and provides proper spring tension and buffer weight for reliable cycling with our Retro Rifle bolt/carrier groups . BRN-10 Crush Washer is desined to work with our BRN-10 rifle and carbine barrels . ab

AR-15/AR-308

BRN-16/BRN-10SMALL PARTS

Small Parts Give the Period-Correct Finishing Touches to an

Authentic Retro Rifle Build

#078-000-529AV BRN-16 Rifle Receiver Extension, 8G25H00 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 31.99

#078-000-525AV BRN-16 Buffer Retainer Spring, 8G0E45 � � � � � � � � � � � � � � � � � � � � � � � � � � � � .59

#078-000-526AV BRN-16 Buffer Retainer, 8G1M00� � � � � 1.39#078-000-527AV BRN-16 Triggerguard, 8G5L25 � � � � � � � 5.70#078-000-528AV BRN-16 Triggerguard Roll Pin,

8G0A45 � � � � � � � � � � � � � � � � � � � � � � � � � � � � .59#078-000-532AV BRN-16 Handguard Slip Ring,

8G2C25 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.73#078-000-533AV BRN-16 Handguard Slip Ring Spring,

8G7H00 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8.99#078-000-530AV BRN-10 Rifle Action Spring, 8G3N20 � � 3.99#078-000-531AV BRN-10 Rifle Buffer, 8G13K00� � � � � � � � 17.99#078-000-534AV BRN-10 Crush Washer, 5/8", 8G1A75 � � � 2.49

Our Retro Waffle magazine is a close replica of the original mili-tary M16 magazines issued in the late 1950s and early ’60s . With the distinctive waffle pattern stamped into its steel (NOT aluminum!) body, just like the originals, our Waffle magazine gives the final touch of period accuracy to your "Retro" reproduction rifle . Most of the original USGI waffle mags were destroyed by the Department of Defense and so are extremely rare and hard to come by - and the few that survive are collector’s items too valuable to shoot . Our mags give you the period-correct appearance at a fraction of the cost, with 100% up-to-date and reliable innards for dependable function in ANY AR-15 - new, old, or reproduction . It has a fully heat-treated (for strength) carbon steel magazine body with the waffle pattern crisply stamped into the sheet metal and a durable, period-correct matte black Parkerized finish . The floorplate and spring are from the Brownells USGI 20-round aluminum magazines .

With a Retro Waffle 20-round M16 magazine, you give your retro AR-15 build the right vintage military look . The waffle texture gives any AR-15 shooter extra "purchase" to aid in fast mag changes in non-retro rifles, too . ab

AR-15/M16

EARLY-STYLE 20-RD"WAFFLE" MAGAZINE

Forget About Scrounging for Battered Originals! Brand-New "Waffle" Mags Are Available Again

#078-000-365AV Early AR-15 "Waffle" Mag, 20-Rd, 9Z42C79 � �$ 49.99

The BRN-10 Waffle Magazine gives you the best of two worlds: It closely replicates the external appearance of the original Armalite® AR-10® magazines from the 1950s, including the distinctive "waffle" indentation pattern pressed into the body to give it extra rigidity . At the same time, it fits modern DPMS LR-308 pattern rifles, including all our Brownells BRN-10 rifles and lower receivers . Working from blueprints for the original Dutch contract AR-10® magazines, our engineering team designed this mag to meet the exterior specifi-cations of the now rare and valuable 50+-year-old originals . The only differences are minor alterations to fit LR-308 mag well, the addition of over-insertion tabs at the top, and the removal of the rib in the magazine catch cutout . The BRN-10 mag body of 6061 T6 aluminum alloy is folded from a single sheet of aluminum, eliminat-ing the extra "fold" at the front and rear . This provides extra room inside for longer cartridges loaded with longer, heavier bullets than the standard 7 .62x51 NATO round . The tough, corrosion-inhibiting hardcoat anodized finish has a consistent matte black coloration; the originals varied a lot between black and gray .

The most historically accurate looking magazine doesn't do any good if it won't feed properly . The BRN-10 Waffle's follower has the same profile as the Dutch AR-10's cast aluminum follower, but it's molded from modern Zytel® nylon polymer . Zytel will not bend and it is exceptionally slick - "self-lubricating" we like to call it - so it'll keep the round stack moving for a greatly reduced risk of hangups and failures to feel . A Waffle Magazine is the finishing touch you need to give your BRN-10 Retro Rifle the correct period look . In fact, it's per-fect for any situation where you need a robust, reliable, full-capacity mag that'll help you sling plenty of .308 lead downrange! ab#078-000-484AV BRN-10 "Waffle" Mag, 20-Rd, 8G55F20 � �$ 59.99

AR-308

BRN-10™ "WAFFLE" MAGAZINE

The Right Look for Your Retro Rifle; Materials, Construction & Reliability as Up to Date as Your Twitter Feed

Many AR-15 enthusiasts don't know that Eugene Stoner's original AR prototype was actually chambered for the .308 Winchester cartridge . Only later did the 5 .56 NATO rifle emerge as the primary design . Our BRN-10 'guard is a detailed reproduction of the original handguard found on these prototype .308 Winchester-chambered rifles . It has the classic rounded cross-section of the 1950s-era handguards with six vent-ing holes on each side to promote barrel cooling . Even better: while our handguard looks entirely authentic, it's manufactured from a modern reinforced molded polymer that is FAR stronger than the original's somewhat fragile (OK, more fragile than modern plastic) fiberglass material . And our handguard is available in three colors - black, O .D . green, and brown - to match the stock colors used on various early Armalite AR-10 rifles, so you can keep your "Retro Repro" rifle build entirely authentic . It is designed for use with rifle-length gas systems and requires a round front handguard cap for installation . ab

An Accurate Repro Handguard for Your Retro AR-308

#078-000-397AV BRN-10 "Prototype" Handguard, Black, 6D25H79 � � � � � � � � � � � � � � � � � � � � $ 29.99

#078-000-398AV BRN-10 "Prototype" Handguard, Brown, 6D22P99 � � � � � � � � � � � � � � � � � � � 29.99

#078-000-399AV BRN-10 "Prototype" Handguard, Green, 6D25H79 � � � � � � � � � � � � � � � � � � � 29.99

AR-308

BRN-10 "PROTOTYPE" HANDGUARD

Whether you’re at the range or humpin’ the boonies, having plenty of ammo to feed your Retro Rifle™ is vital . With a few extra loaded 25-round Retro AR-15 magazines on hand, you won’t have to "di-di mau" back for more . Externally, this straight-bodied steel mag is a carefully reproduced replica of the magazines Armalite assembled for their original AR-15 prototype rifles - ideal for your very early Retro Repro build . These mags are 100% up-to-date with reliable modern innards, and they will fit and function dependably in ANY modern AR-15 with a mil-spec lower, including our Retro lowers . We’re pointing this out because, if you know your AR-15/M16 history well, you know that the prototype rifles’ mags won’t fit a modern gun . Now you can give your rifle that period-correct appearance so many AR-15 history fans/shooters crave, with a rea-sonably priced "shooter" mag! Fits modern "mil-spec" AR-15 lower receiver, including Brownells Retro receivers . Stamped steel body and floorplate have correct markings/indentations, with a durable, period-correct matte black Parkerized finish . Modern chrome sili-con spring maintains proper tension for consistent feeding, while the glass-fiber reinforced composite follower further aids feeding .

Our 25-round Retro AR-15 magazine is the perfect complement to your Retro AR-15 rifle - whether you bought it whole or built it from parts . It’s also ideal for shooters who prefer the reliability of the straight-body magazines the AR-15 was originally designed to use but want extra capacity beyond a standard 20-round mag . As a bonus, that sturdy steel body will stand up to all the abuse you can give it, and be ready for more! ab

AR-15/M16 25-ROUND

STRAIGHT BODY MAGAZINEThe Final Touch of Historical Detail for Your

"Retro" Rifle - Plus 5 Extra Rounds

#078-000-466AV Retro 25-Rd Straight Magazine, 9Z54P83 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 59.99

RE

TR

O R

IFLE™

PA

RT

S

If you want the final, finishing touch to complete the look of your CAR-15 carbine reproduction, then our XM177 CAR Buttstock is a must-have . The predecessor for the modern-day M4 adjustable car-bine buttstock, the XM177 CAR stock is a perfect reproduction of the original design used on the early XM177 and CAR-15 designs, but this stock looks great and fits onto any standard modern AR-15 platform . Constructed of reinforced, molded polymer (the originals were alu-minum) . Mil-Spec fits older USGI-type (nominal 1 .14" O .D .) receiver extension/buffer tube . Commercial fits modern (nominal 1 .17" O .D .) tube; will also fit mil-spec buffer tube, but the fit will be loose so the stock won't provide maximum stability . But it'll look right . ab

Early-Style CAR-15 Buttstock for a Truly Authentic "Retro" Carbine Build

#078-000-374AV XM177 CAR Bttstk, Commercial, 9B18N79 � � $ 19.99 078-000-498AV XM177 CAR Bttstk, Mil-Spec, 1B36B67 � � 39.99

AR-15/M16

XM177 CARBINE BUTTSTOCK

QUESTIONS BEFORE YOU BUY?Call Or Email Our

Full-Time Tech Staff

AR-15/AR-308

BRN-10™ PISTOL GRIP

Correct Look for Replicas of Early AR-10s; Subtle Upgrades

for Comfort; Fits AR-15 Lowers, Too!

#078-000-485AV BRN-10 Pistol Grip, Brown, 8G22P90 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 24.99

#078-000-486AV BRN-10 Pistol Grip, Black, 8G22G90 � � � � � � � � � � � � � � � � � � � � � � � � � � 24.99

Our BRN-10 Pistol Grip is in-spired by the original grip for Ar-malite AR-10® rifles built for the Dutch contract . However, as the original was a bit undersized and not entirely comfortable in the average hand, we have subtly bulked up our grip in a few key spots to make it fill the hand better and give you a better hold . It still has the contour below the safety and ser-rations on the backstrap, just like the original . We have of course adapted it to fit our BRN-10 lower receiver, which means it will also fit any AR-15 or DPMS LR-308/Knight's SR-25-pattern lower receiver, as long as the receiver has the standard AR-15 contour at the pistol grip attachment point . The BRN-10 pistol grip is made of modern reinforced molded polymer, so it's far more durable than an original, AND you can get it in Brown (correct for very early rifles) and Black (later rifles and use on modern AR-15/AR-308s) . ab


SINCE 1939 PAGE 2 Office/Tech: 641-623-5401GUARANTEED. FOREVER.

SINCE 1939

The AR-15, evolved. Advanced upper receivers for today’s tactical/competition shooter.

Compact & maneuverable - 10.5” barrel

Adjustable gas block lets you “tune” gas fl ow for suppressor use

Can be fi red with a folding stock/brace folded

Ultra-reliable gas piston operating system

Proven dual-rod recoil system withNO bu� er or tube

Fits any mil-spec AR-15 lower

Page 2

BRN-180™ BRN-180S™

Yesterday’s Gun Today!

Brownells Retro Rifles are close copies of historical AR-15 designs. Hold history in your hands. Brownells Retro Rifles

BRN-PROTO™

#078-000-468

BRN-601™

#078-000-400

BRN-605™

#078-000-469

Pages 10-15


brownells.com PAGE 2 Office/Tech: 641-623-5401GUARANTEED. FOREVER.

SINCE 1939

The AR-15, evolved. Advanced upper receivers for today’s tactical/competition shooter.

Compact & maneuverable - 10.5” barrel

Adjustable gas block lets you “tune” gas fl ow for suppressor use

Can be fi red with a folding stock/brace folded

Ultra-reliable gas piston operating system

Proven dual-rod recoil system withNO bu� er or tube

Fits any mil-spec AR-15 lower

Page 2

BRN-180™ BRN-180S™

Yesterday’s Gun Today!

Brownells Retro Rifles are close copies of historical AR-15 designs. Hold history in your hands. Brownells Retro Rifles

BRN-PROTO™

#078-000-468

BRN-601™

#078-000-400

BRN-605™

#078-000-469

Pages 10-15

AR

-15

/M16


SINCE 1939

Drop-in .22 LR conversion system comes fully assembled and ready to install in any semi-auto AR-15 to help you practice critical shooting skills with economical rimfire ammunition . Helps you concentrate on improving grip, sight alignment, trigger pull, and other skills without burning up ex-pensive centerfire ammo . Simply replace the rifle’s bolt and carrier with the Bravo conversion unit, load up the included magazine, and you're ready to shoot . Precision machined from high-grade stainless steel for reliable function in any mil-spec

AR-15 rifle or carbine chambered in 5 .56mm NATO, including many gas piston systems . Note: CMMG recommends Federal 36 grain plated round-nose ammunition for best performance . Works best with round-style AR-15 hammers; notched hammers can cause function problems . abSPECS: Stainless steel bolt group, polished finish. Includes and a forward assist adapter, stainless steel jag/guide rod, anti-jam charging handle, brass bushing. Fits semi-auto AR-15 rifles chambered in 5.56mm NATO, including gas piston conversions where the piston enters the receiver no more than 17/8". Designed for high-velocity, round-nose 22 LR am-munition.

CMMG AR-15

BRAVO .22 LR CONVERSION KITSUse Economical .22 LR Ammo

To Practice More & Hone Critical Shooting Skills

#100-010-627AV Bravo .22 Conversion Kit w/1x 25-Rd Mag, 3B166D25 � � � � � �$ 196.99

#100-022-952AV Bravo .22 Conversion Kit w/3x 25-Rd Mags, 3B201F82 � � � � � � 206.99

Plug-and-play conversion adapt-er allows you to use 9mm Glock® mags in a standard AR-15 lower - a quick and easy way to get a lower for your PCC . No permanent mods required to lower or magazines . Made from 6061 T6 aluminum, the adapter locks in place using the existing magazine catch, and when you want to remove it, it releases just like a regular mag . The adapter has a built in release for the Glock mag, PLUS a bolt hold open feature that locks your bolt back after the last round . This 9mm AR adapter ac-cepts Glock-style double stack 9mm magazines . Comes with one 10-round mag . ab

AMERICAN TACTICAL AR-15

9mm MAGAZINE ADAPTERConvert Your AR-15 to 9mm Without Any Modifications

#100-027-243AV 9mm Mag Adapter, 3E120N56� � � � � � �$ 129.99

With the Stern's adapter, you can eas-ily convert a mil-spec AR-15 lower to run on popular 9mm pistol magazines for your next pistol-caliber AR build . It installs easily into any mil-spec AR-15 lower receiver within seconds, and even incorporates a last-round bolt hold

open feature plus an easy to reach mag release . Robust all-alumi-num construction; black anodized finish . Separate models for 9mm Glock® or S&W M&P/SIG 320 Mags. ab

STERN DEFENSE AR-15

9mm MAGAZINE ADAPTERConverts Standard Mil-Spec Lower To Use

Popular 9mm Pistol Mags

#100-027-483AV 9mm Adapter for Glock® Mags, 9D179A99 � � � � � � � � � � � � � � � � � � � � � � � � $ 179.99

#100-033-498AV 9mm Adapter for M&P/SIG 320 Mags, 9D186M99 � � � � � � � � � � � � � � � � � 186.99

One-piece, machined aluminum block converts AR-15 lower receiver to 9mm . Com-patible with all Colt-type, 9mm upper receiv-ers, the feed ramp is cut for reliable feeding with all types of ammo, including hollow point and frangible ball . Roller retention de-

vice holds block securely in receiver, prevents accidental release . Hardened steel ejector, feed ramp and bolt hold open give long ser-vice life; last-round-hold open feature on bottom-loading model works when used with Colt magazines . Also works with modified UZI magazines but last-round-hold-open will not function . No receiver modification required . Top-Loading Block installs from the top of the lower receiver (no hold open feature) and Bottom-Loading Block installs from the bottom of the lower receiver . Also available as a kit that includes a Metalform 32-rd steel magazine for more shooting time between reloads . abSPECS: Body - Aluminum, black, matte finish. Feed Ramp, Bolt Catch & Ejector – Steel. Magazine – Steel, blued..

DEDICATED 9mm CONVERSION BLOCK - De-signed, manufactured, and field-tested specifi-cally for law enforcement personnel who require an AR-15/M16 dedicated to 9mm ammo using Colt and modified Uzi-type magazines . Integral “leg” hooks over the top of the lower receiver to prevent accidental fall-out during actual combat situa-tions where reliability is paramount . Hold actuator is wire EDM-machined from high grade, 01 tool steel and functions with the standard 5 .56mm bolt hold-open, which is strong, reliable and more readily available than the 9mm version . (Last round hold-open feature functions with Colt magazines only .) Ejector is of standard, Colt configuration for easy replacement by any depart-ment armorer . Funneled magazine well ensures smooth entry for rapid mag changes and limits rotational movement caused by vari-ances in magazine taper . Spring-loaded roller maintains constant tension against the lower receiver well to prevent free play . Steel feed ramp provides consistent round delivery with most bullet types . Armorer installation recommended .SPECS: Body – 6061-T6 billet aluminum, mil-spec black anodized finish. Components – Steel, parkerized finish. Fits all Mil-Spec AR-15/M16 receivers. #100-002-321AV Dedicated 9mm Conversion Block,

6K186I34 � � � � � � � � � � � � � � � � � � � � � � � � � $ 244.99

#100-000-920AV Top-Loading 9mm Conversion Block, 6K140L98 � � � � � � � � � � � � � � � � � � $ 169.99

#100-007-325AV Top-Loading 9mm Conversion Kit, w/32-Rd. Mag., 8K201A79 � � � � � � � � � 211.99

#100-000-443AV Bottom-Loading 9mm Conversion Block, 6K162G18 � � � � � � � � � � � � � � � � � 189.99

#100-007-324AV Bottom-Loading 9mm Conversion Kit, w/32-Rd. Mag., 8K214P39 � � � � � � 226.99

Reliable Feeding With A Host Of Ammo Types; Models For Every Shooting

Application

HAHN PRECISION AR-15

9mm CONVERSION BLOCK

ab

Stock System lets you turn rail-mounted Havoc into a stand-alone launcher . Features a standard M4 stock, A2 pistol grip, Picatinny top rail, buffer tube, latch plate and castle nut . Fits 12" launcher only . abSPECS: 6061 T6 aluminum, hardcoat anodized, and 1018 cold-rolled steel, oxide coated, black. 9" Launcher – 91/16" (23cm) OAL, 51/2" (14cm) tube length. 2 lb., 5 oz. (1kg) wt. 12" Launcher – 125/8" (32cm) OAL, 9" (22.8cm) tube length. 2 lb., 14 oz. (1.4kg) wt.

Breech-loading 37mm flare launcher clamps securely to the bottom rail of any 7" or longer Picatinny handguard . Lets you use 53/4" U .S . Coast Guard approved flare, smoke, or gas rounds for field operations or training . A single push of the button quickly opens the launcher to remove a spent round and insert a fresh cartridge . STZ pushbutton cylindrical breech lock is far stronger than lever locks typically used on this type of launcher . 9" Launcher has pivoting tube that swings to the side for loading . 12" Launcher tube slides forward for rear feed . Mounting hardware and instructions included . Kaos

SPIKE’S TACTICAL AR-15/M16

“HAVOC” 37mm FLARE LAUNCHER

Adds Another Tactical/Training Capability To Your AR

#100-007-033AV Havoc 9" Launcher, 3B333N68 � � � � � $ 403.99#100-007-034AV Havoc 12" Launcher, 3B287N74 � � � � 347.99#100-007-474AV Kaos Stock System for 9" Launcher,

3B184N49 � � � � � � � � � � � � � � � � � � � � � � � � 230.99#100-011-261AV Kaos Stock System For 12" Launcher,

3B184N84 � � � � � � � � � � � � � � � � � � � � � � � � 230.99

CA

LIB

ER

CO

NV

ER

SIO

NS

BO

LTS

& C

AR

RIE

RS

Just for Big AR shooters comes this superb .308/7 .62 bolt carrier group with for-

ward assist serrations . Carrier is machined from tough 8620 steel to take a pounding, with a staked gas key that won't work loose . The bolt is machined from 9310 steel, shot peened, high pressure tested and magnetic particle inspected for cracks or flaws . Fits DPMS first-generation LR-308 uppers . Black Parkerized finish . ab

AERO PRECISION

AR-308 BOLT/CARRIER GROUPBeefed Up in the Right

Places for .308

#100-019-270AV AR-308 Bolt/Carrier Group, 3E213C99 � � � � � � � � � � � � � � � � � � � � � � � � $ 213.99

Complete bolt-and-carri-er group comes fully assembled and ready to go into your gun, whether it's a new build or an Old Faithful with a worn out BCG . Fits .223/5 .56 uppers and features chrome-lined carrier and gas key to resist heat, wear, and corrosion . Carrier has extended M16-pattern shroud to trip auto sear . Bolt is magnetic particle inspected to verify a lack of internal flaws that might cause premature failure . Gas key screws are torqued and staked into place . abSPECS: Bolt - 9310 carbon steel. Carrier - 8620 steel. Matte black phos-phate finish.


M16 BOLT/CARRIER GROUPReady To Go In Semi- Or Full-

Auto/Burst Rifles

#100-016-550AV M16 Bolt Carrier Group, 8Z91Q21 � � $ 105.99

Bravo Company's BCG is machined to USGI specifications with an M16/M4 carrier that can be used on full-auto rifles . Of course, the heat-treat hardened, chrome-lined gas key is secured with Grade 8 screws and "properly" staked . Likewise, the bolt assembly is machined from the correct mil-spec Carpenter 158 steel alloy and shot-peened for enhanced strength, then fitted with a tool steel extractor and ejector, BCM extractor spring . During manufacture, these BCGs are high-pressure tested and magnetic particle inspect-ed (MPI) to weed out flawed units before they leave the factory . Prior to shipping, all are test fired for function, so they will show handling marks consistent with these QC procedures . Available with Black Parkerized carrier or Flat Dark Earth (FDE) carrier finished with an IonBond coating that lowers friction and resists fouling build-up, so requires less frequent cleaning and is easier to clean when you do . ab


M16 BOLT/CARRIER GROUPConfigured to Trip

Auto-Sear in Full-Auto Guns - Works Just as Well in Semi-Autos

#100-020-758AV M16 Bolt/Carrier Group, Black, 1E169A00 � � � � � � � � � � � � � � � � � � � � � � � � $ 169.00

#100-020-760AV M16 Bolt/Carrier Group, FDE, 1E189C00 � � � � � � � � � � � � � � � � � � � � � � � � 189.00

FOLLOW US • FRIEND US • LIKE USGO ONLINE FOR SPECIAL PROMOTIONS, CONTESTS AND NEWS.

LEAVE YOUR COMMENTS OR SUGGESTIONS!

Here’s a truly unique, ultra-cool way to cap off that Retro Rifle build or give any contempo-rary AR-15 a truly badass upgrade – the M203 37mm Launcher from LMT! An exact replica of the 40mm grenade launch-ers used by the U .S . Army since 1969, LMT’s M203 launches 37mm flare, smoke, or rub-ber ball rounds ONLY, making it completely legal for civilians to own, with NO FFL required .

(The smaller caliber completely prevents the loading of military 40mm ordnance in this launcher .) Aside from adding an extra level of authenticity to a Retro Rifle, the LMT M203

37mm launcher can also be an excellent training tool for law en-forcement and security personnel .

This 37mm M203 installs and operates just like its 40mm USGI big brother . Simply release the top locking lever, slide the tube for-ward, drop in the round, snap the tube back, and you’re ready to light up the night or lay down a smoke screen . LMT’s M203 attaches to either a standard M16A2 rifle barrels with a .625” front O .D . or an M4 carbine barrel with the grenade launcher cutout in front of the gas block, with a GI-type barrel nut at the rear .

The M203 fits AR-15s with an M4 carbine or 20" M16A2 rifle barrel contour . It's made of 7075 aluminum, with a mil-spec hard-anodized finish in matte black . The smooth-bore barrel WILL NOT accept military 40mm rounds . 15" OAL, 12" barrel, 3 lbs . total wt .

LMT offers two mounting kits for the M203 37mm Launcher: a Military-Style Kit that precisely replicates the original M204 mili-tary mount, including the replacement handguard (carbine and rifle models available) and a Quick-Detach Mount that lets you eas-ily remove the M203 from your rifle when you need it for other purposes (just as easy to reattach the launcher) . Somebody go get "The Roach" . . . ab

LEWIS MACHINE & TOOL (LMT)

M203 37mm LAUNCHER

#100-027-797AV M203 37mm Launcher, 4A1572P00 � � $ 1599.00#100-027-794AV QD M203 Launcher Mounting

Bracket, 4A203I15 � � � � � � � � � � � � � � � 218.00#100-027-795AV Military M203 Mounting Kit for M4

Carbine Barrel, 4A246D31 � � � � � � � � 259.00#100-027-819AV Military M203 Mounting Kit for A2

20" Rifle , 4A246K31 � � � � � � � � � � � � � � 259.00

Detail-Accurate Reproduction of GI-Issued Component - Available To Everyone

Military M4 Mount

QD Low-Pro Mount


brownells.com

AR

-15/M

16B

OLT

S & C

AR

RIE

RS

Fully-assembled bolt-and-carrier group drops into an M16 or AR-15 and gives superb reliability. After machining, bolt is shot peened and heat-treated for extra strength and hardness. Every bolt is high-pressure tested (HPT) with a proof load, then magnetic particle inspected to detect internal flaws that could lead to pre-mature failure. Bolt carrier body is machined from 8620 hardened steel and is chrome lined for high resistance to wear and heat. Has the extended shroud to trip auto sear on full-auto rifles; works fine in semi-auto rifles, too. Installed extractor includes black rubber in-sert with spring. Gas key is also chrome-lined, with screws correctly torqued and staked. The Brownells BCG is available with a traditional military-type Parkerized finish that stands up to surface erosion and helps extend service life, or a self-lubricating Nitride finish that of-fers greater wear resistance and easier cleaning. abSPECS: Bolt - Carpenter 158 alloy steel. Carrier - 8620 steel. Available with mil-spec Parkerized finish or extra-hard matte black Nitride finish. Includes firing pin, cam pin, and firing pin retaining pin.

AR-15/M16

M16 BOLT/CARRIER GROUP

Complete, HPT/MPI Inspected BCG That

Won't Leave You High & Dry

#078-000-250AV M16 Bolt/Carrier Group, Parkerized, 8G131P99 � � � � � � � � � � � � � � � � � � � � � � � � �$ 139.99

#078-000-251AV M16 Bolt/Carrier Group, Nitride, 8G131B99 � � � � � � � � � � � � � � � � � � � � � � � � � 139.99

#078-102-001AV M16 Bolt/Carrier Group, Nitride, 8G85F99 � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99

#078-102-002AV M16 Bolt/Carrier Group, Nickel Boron, 8G104L99 � � � � � � � � � � � � � � � � � � 109.99

#078-102-003AV M16 Bolt ONLY, Nitride, 6H42N79 � � � 49.99

Our M16-pattern bolt/carrier groups for AR-15s chambered in "non-traditional" cartridges are built to the same rigorous criteria as our standard AR-15 BCGs. The offer premium performance in any AR-15-style rifle, ensuring reliable and durable service. The Brownells M16 6.8 SPC Bolt Carrier Group features construction us-ing both 8620 and 9310 steel. The bolt face is constructed using the harder 9310 steel, which then undergoes heat treatment and shot peening. The carrier itself is machined from hardened 8620 steel. Quality assured with magnetic particle inspection. Rubber insert and spring included in extractor construction. Matte-black nitride finish provides reduced friction and increased rust-resistance. Properly torqued and staked gas-key screws. 6.8 SPC bolt/carrier group also comes complete with a firing pin, cam pin and firing-pin retaining pin. Brownells M16 .458 SOCOM Bolt Carrier Group provides users with a complete assembly, also including a firing pin, cam pin and a firing pin retaining pin. ab

AR-15

"OTHER CALIBER" BOLT/CARRIER GROUPS

Correct-Fitting, Complete BCG for Rifles

Chambered in Non-Traditional AR Cartridges

#078-102-006AV 6.5 Grendel Bolt/Carrier Group, 8G92P99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 109.99

#078-102-008AV 6.8mm SPC/224 Valkyrie Bolt/Carrier Group, 8G92B99 � � � � � � � � � � 109.99

#078-102-005AV 7.62x39 Bolt/Carrier Group, 8G92J99 � � � � � � � � � � � � � � � � � � � � � � � � � 109.99

#078-102-007AV .458 SOCOM Bolt/Carrier Group, 8G99G79 � � � � � � � � � � � � � � � � � � � � � � � � � 109.99

This upgraded bolt/carrier group fits any 5.56 NATO-chambered AR-15 with a mil-spec up-per receiver to provide an immediate performance improvement. The carrier is made of exceptionally lightweight yet strong 6A1-4V Titanium alloy, which reduces the overall reciprocating mass of the BCG for less felt recoil and easier, faster follow-up shots. A further benefit is a reduction in the overall weight of your rifle or carbine - why carry around an ounce more than you need to? The bolt is machined from sturdy, heat-treat hardened 9310 tool steel to resist blast erosion and provide solid lockup. Each BCG is given a super-tough black DLC (Diamond-Like Carbon) finish, and ships completely assembled, including extractor O-rings and torqued-and-staked gas key. For use in semi-auto AR-15s only; will not work in full-auto capable rifles. ab

AR-15

LIGHTWEIGHT TITANIUM BOLT/CARRIER GROUP

Lighten Your BCG, Lessen Your Rifle's Felt Recoil

#078-000-493AV Titanium Bolt/Carrier Group, 6G285I24� � � � � � � � � � � � � � � � � � � � � � � � � $ 299.99

Our .308 BCG is designed to operate reliably in DPMS LR-308 pattern rifles chambered in .308, .243, 7mm-08, .338 Federal, .260 Remington, 6.5mm Creedmoor, or any other cartridge based on the .308 Winchester. These BCGs are manufactured to the same uncompromising standards as our M16-style BCGs. Our Complete .308 Bolt Carrier Group has a bolt machined from robust 9310 steel, heat-treated and shot-peened for superb hardness. The carrier itself is fabricated from hardened 8620 steel. Both are magnetic particle inspected (MPI) to make sure there are no hidden microscopic flaws that could lead to premature failure. Carrier has forward assist notches. Extractor is installed with rubber insert and spring. Gas key screws are torqued and staked. For use in DPMS LR-308 pattern upper receivers only; NOT compatible with Armalite rifles. Avail-able with a hard Black Nitride finish that is exceptionally resistant to surface wear OR a Nickel Boron finish (a dull matte silver) that’s even harder and self-lubricating to boot. Both come complete with firing pin, firing pin retaining pin, cam pin, gas rings, gas key, extrac-tor, and ejector installed. Unlike BCGs with a traditional Parkerized finish, the carrier on our Black Nitride bolt carrier group is not hard-chromed inside because Nitride is actually harder than industrial chrome plating. abSPECS: Fits DPMS LR-308 pattern rifles, including chamberings in .243, .260 Remington, 6.5 Creedmore, 7mm-08, and 338 Federal. Bolt- Vac-Arc 9310 steel. Carrier - 8620 steel. Extractor - S7 tool steel. Gas Key - 4140 carbone steel. Cam Pin - 4340 carbon steel.

AR-STYLE .308

BOLT/CARRIER GROUPSBuilt For Strength,

Durability & Reliability In Your DPMS-Pattern Rifle

#078-102-004AV AR-308 Bolt/Carrier Group, Nitride, 8G144K99 � � � � � � � � � � � � � � � � � � � � � � � � $ 169.99

#078-000-392AV AR-308 Bolt/Carrier Group, Nickel-Boron, 8G171Q99 � � � � � � � � � � � � � � � � � 189.99

Complete bolt/carrier group is ready to drop into your AR-style .308 rifle and run hard. Machined of 8620 steel, carrier has a durable phosphate finish and chrome lined interior. Carrier does not have serrations for a forward assist. Bolt is machined from 9310 hardened steel with an extractor of hardened S7 tool steel and a phosphate finish. Gas key has been torqued to spec and properly staked. Firing pin is machined from stainless steel. Group also includes cam pin and firing pin retaining pin. abSPECS: Carrier - 8620 steel, chrome lined, phosphate finish, matte black. Bolt - 9310 steel, phosphate finish. Extractor - S7 tool steel, phosphate finish. Firing Pin - Stainless steel.

CMMG AR-STYLE .308

MK3 BOLT/CARRIER GROUPHeavy Duty

Construction Stands Up To Hard Use

#100-013-649AV AR-308 Bolt/Carrier Group, 3B264P12 � � � � � � � � � � � � � � � � � � � � � � � � $ 269.99

Complete, mil-spec bolt-and-carrier group comes fully as-sembled and ready to drop into your carbine or rifle. Each compo-nent is precision machined then high pressure tested and magnetic particle inspected to meet strict quality control. Carrier has full-length shroud to trip the auto sear on full auto/burst rifles. The black Parkerized finish provides extra strength and corrosion resistance. Gas key is properly staked to prevent gas leakage that can lead to short stroking. Chrome lined carrier and gas key help resist wear from hot combustion gases and ensure smooth cycling. abSPECS: Steel, matte black Parkerized finish.

Precision Engineered For Years Of Dependable Service

#160-000-390AV M16 Bolt/Carrier Group, 6A216H99 � �$ 216.99

COLT AR-15/M16

BOLT/CARRIER GROUP

Complete, mil-spec assembly with bolt, bolt carrier, and firing pin is ready to drop into the rifle or carbine upper of your choice. Features a shot-peened bolt for increased surface strength and du-rability, and an extractor booster to ensure reliable cycling during rapid fire. Each assembly is magnetic particle inspection tested to ensure it’s free from imperfections that can lead to premature fail-ures. Carrier is chrome lined for smooth cycling and resistance to wear from hot combustion gases for years of dependable service. Properly staked gas key prevents gas leakage that can lead to short stroking. M16-style carrier with full-length shroud for tripping auto sear, so the it may be installed in full-auto law enforcement and military rifles. abSPECS: Steel, matte black Parkerized finish. Fits mil-spec AR-15/M16 upper receiver chambered for .223/5.56mm. May be installed in semi- or full-auto rifles. Available with a .223/5.56mm bolt or a 6.8 Remington SPC bolt.


COMPLETE BOLT/CARRIER GROUPDrop-In Assembly With

Strength & Durability Features For Dependable Service

#100-004-634AV 223/5.56 Bolt/Carrier Group, Parkerized, 8K185E00 � � � � � � � � � � � � � $ 185.00

#100-009-948AV 6.8 SPC Bolt/Carrier Group, Parkerized, 8K185N00 � � � � � � � � � � � � 185.00

Steel bolt is shot-peened for extra surface hardness, then mag-netic particle inspected (MPI) for cracks and flaws to ensure reli-ability and long service life. Comes completely assembled, with gas rings, extractor, and ejector installed. abSPECS: 4340 steel, phosphate coated, matte black. Fits rifles chambered for 5.56 NATO or .223 Rem, or other cartridges that have the same size case head.


COMPLETE BOLT ASSEMBLYManufactured To Rigorous Quality

Control Standards; Available In 5.56mm Or 6.8mm SPC

#100-009-950AV 5.56mm Bolt Assembly, 8K66Q00 � � � $ 66.00

Complete bolt/carrier assembly comes ready to drop in your rifle—ideal as a replacement, in a custom build, or as a backup for extra insurance during com-petition. Machined from high-grade 8620 carbon steel to mil-spec dimensions, with hard-chrome plated steel firing pin and chrome-lined, staked gas key for added durability. Carrier is notched for for-ward assist. Magnetic particle inspection (MPI) during manufacture ensures each component is solid and free of internal flaws. abSPECS: 8620 steel, Parkerized, matte black. Carrier does not have provi-sion for auto-sear trip.

DOUBLE STAR AR-15/M16

BOLT/CARRIER ASSEMBLYMil-Spec Dimensions For

Drop-In Fit; MPI Inspected For Soundness

#100-004-911AV AR-15 Bolt/Carrier Assembly, Parkerized, 2Z114N29 � � � � � � � � � � � � � $ 129.99

Steel, Teflon-coated, to eliminate bind on bearing surfaces which can prevent reliable cycling. Mil-spec bolt assembly is ma-chined to strict tolerances for a drop-in fit and requires no gun-smithing. abSPECS: Steel, Teflon-coated, matte black. 5.56mm/.223 bolt assembly meets mil-spec #8448510.

DPMS AR-15/M16 BOLT ASSEMBLYReplaces Factory Bolt; Use For

Building Custom Sporter & Varmint Rifles

#231-000-196AV 5.56mm/.223 Bolt Assembly, 1C48C68 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 57.99

Complete AR-style .308 bolt-and-carrier assembly is drop-in ready for replacement of worn components in existing DPMS LR-308 rifles or for a new custom build. Machined from heat-treated 8620 steel, with a matte black Parkerized finish. Bolt comes fully assembled with firing pin, cam pin, firing pin retaining pin, ejector, extractor, and gas rings installed. Comes with gas key installed and staked. abSPECS: 8620 heat-treated carbon steel, Parkerized, matte black finish. Fits DPMS LR-308 upper receivers and clones.

DPMS AR-STYLE .308

BOLT/CARRIER ASSEMBLYFactory Original

Components Used In LR-308 Rifles

#231-000-265AV AR-308 Bolt/Carrier Assembly, Parkerized, 1C299Q99 � � � � � � � � � � � � � $ 299.99

compatibility with different buffer systems. Compatible with both Glock and Colt magazines. Features complete nitride treatment for reduced friction. The Brownells 9mm AR-15 Bolt Carrier Group also features a captured firing pin in order to prevent the possibility of slam fires. ab

Our 9mm AR-15 bolt/carrier "group" is specifically designed for use in pistol-caliber carbines, which are a growing trend in the AR-15 world. This bolt-carrier group allows AR builders to custom-make their own 9mm AR. Constructed entirely from a single piece of steel billet and features a pinned weight that can be taken out for

AR-15

9MM BOLT/CARRIER GROUPA Purpose-Made Bolt for

Your Pistol-Caliber Carbine

#100-026-220AV 9mm Bolt/Carrier Group, 1D127F99 $ 149.99

AR

-15

/M16


SINCE 1939

BO

LTS

& C

AR

RIE

RS

Just because a bolt/carrier group meets standard "mil-spec" dimensions doesn't mean it's a low-rent component made by the lowest bidder. Faxon machines the bolt from high-grade 9310 tool steel that is STRON-GER than the standard Carpenter 158 alloy used on AR-15 bolts. The backs of the lugs are chamfered to aid in smooth, reliable lockup. Of course, the extractor is made of S7 tool steel, while the carrier is machined from 8620 carbon steel with a torqued-and-staked gas key of 4140 steel. The carrier has an M16-type full-length shroud on the underside to correctly trip the auto sear of full-auto rifles - works just as reliably in semi-auto ARs. Comes with forward assist serrations, and a Crane O-ring is standard equipment (installed). Bolt has a tough QPQ salt bath nitride finish that resists corrosion and provides a natural slickness that resists wear and requires less gas pressure to operate. Carrier available with black QPQ, even more wear-resistant gold Titanium Nitride (TiN), or exceptionally hard, wear- and heat-resistant multi-color Chameleon PVD finish. ab

FAXON FIREARMS

M16-TYPE BOLT/CARRIER GROUP

Premium-Quality M16-Type BCG With Choice of

High-Tech Finish

Titanium Nitride

Chameleon PVD

#100-030-944AV 5.56/.223 M16 Bolt/Carrier, Black QPQ, 1D138B36 � � � � � � � � � � � � � � � � � � $ 141.99

#100-030-945AV 5.56/.223 M16 Bolt/Carrier, TiN, 1D184B79 � � � � � � � � � � � � � � � � � � � � � � � � 189.99

#100-030-946AV 5.56/.223 M16 Bolt/Carrier, Chameleon PVD, 1D184L79 � � � � � � � � 189.99

#100-030-949AV 6.5 Grendel M16 Bolt/Carrier, Black QPQ, 1D153K21 � � � � � � � � � � � � � � � � � � � 156.99

Custom, stainless steel bolt carrier features a 100% increase in bearing surface for

smooth cycling and outstanding reliability. Includes forward assist serration and dust cover notch for tactical duty or any application requiring absolute “no-fail” operation. Expanded, exterior, bearing surfaces are hand polished and ensure precise alignment in upper receiver for less wear. Non-plated carrier bore is roller burnished for low-drag movement. Rear of carrier is designed in the AR-15, semi-auto configuration with longer, mil-spec cocking pad in the front. Five-step QPQ process produces an exceptionally hard, wear-resistant high-lubricity black finish. Comes with steel gas key installed. abSPECS: 416 stainless steel, polished, black QPQ finish. Includes steel key. 9 oz. (255g).

JP ENTERPRISES AR-15

STAINLESS STEEL BOLT CARRIERBurnished & Hand Polished

For Smooth, Reliable Operation

#452-000-022AV JPBC-2 Stainless Steel Bolt Carrier, 2E207I52 � � � � � � � � � � � � � � � � � � � � � � � � � $ 214.99

Reduced-weight bolt/carrier assembly helps tame felt recoil on an ArmaLite®, DPMS, or Remington AR-style .308 rifle. Carrier features the same type of weight-reducing cuts found on the origi-nal JPBC-3 AR-15 bolt carrier to give the same benefits your .308. Wide carrier rails have extra bearing surface to improve bolt align-ment and reduce wear. Forward assist serrations have been omitted for competition use and further weight reduction. Comes with a complete JP EnhancedBolt™ (also available separately), designed to stand up to high-heat, high-impact use. Carrier key is already installed and staked. abSPECS: Carrier - 416 stainless steel, with bright polished finish or black QPQ finish. Bolt – 9310 nickel-chromium-molybdenum steel. Fits DPMS LR-308 and Remington R-25 rifles. May also be used in ArmaLite® AR-10® or Rock River Arms rifles ONLY as a complete assembly.

JP ENTERPRISES AR-STYLE .308

JPBC-4 LOW-MASS BOLT/CARRIER ASSEMBLYHelps Reduce Felt Recoil On Large-

Caliber AR Platform Rifles

#452-000-128AV JPBC-4BA Low-Mass Bolt/Carrier, QPQ, 2E408D95 � � � � � � � � � � � � � � � � � � $ 423.99

#452-000-159AV JPBC-4SPA Low Mass Bolt/Carrier, Polished , 2E408Q95 � � � � � � � � � � � � � � 423.99

#452-000-172AV JPBC-4 Low Mass Carrier Only, QPQ, 2E217F52 � � � � � � � � � � � � � � � � � � � 256.99

JPBC-4SPA Polished

JPBC-4BA QPQ

Precision-machined, stainless bolt-and-car-

rier group features JP’s enhanced bolt made of high-grade 9310 steel for a significantly longer life expectancy than standard mil-spec bolts. Set is avail-

able with choice of a JPBC-3A Low Mass carrier that reduces felt recoil and increases bolt speed slightly for enhanced rapid fire han-dling, or with a standard JPBC-2A Full Mass carrier that replicates the normal carrier weight and is preferred for duty rifles or any time absolute reliability is required. Standard weight carrier features a 100% increase in bearing surface for smoother cycling and reduced wear on the inside of the receiver. Both carriers feature JP’s super-hard QPQ finish for maximum wear resistance and minimal friction. JPBC-3SPA Low Mass carrier has a bright, polished, natural silver finish. abSPECS: Bolt – 9310 steel, in the white. Fits 5.56mm/.223, 300 AAC Black-out, and other .223-based cartridges. Carrier – 416 stainless, natural pol-ished silver or blacl QPQ coated. Extractor firing pin, cam pin, and firing pin retainer included.

FULL MASS 6.5 GRENDEL B/C SET - Brings the same superb fit, function, and reliability of JP’s 5.56 bolt/carrier sets to AR-15s chambered for the versatile 6.5 Grendel cartridge. #452-000-173AV JPBC-2A-6.5G Full-Mass 6.5 Grendel

B&C, 2E299C16 � � � � � � � � � � � � � � � � � � � $ 332.99


STAINLESS BOLT/CARRIER SETSHigh-Performance,

B/C Groups In Choice Of Full- Or Low-Mass

ConfigurationJPBC-2A Full Mass

#452-000-130AV JPBC-2A Full-Mass Bolt & Carrier, 2E333B22 � � � � � � � � � � � � � � � � � � � � � � � � �$ 351.99

#452-000-131KT JPBC-3A Low-Mass Bolt & Carrier, 2E323G49 � � � � � � � � � � � � � � � � � � � � � � � � � 335.99

#452-000-158AV JPBC-3SPA Polished Low Mass Bolt & Carrier, 2E323E49 � � � � � � � � � � � � � � � � 335.99

#452-000-173AV JPBC-2A-6.5G Full-Mass 6.5 Grendel B&C, 2E299C16 � � � � � � � � � � � � � � � � � � � � 332.99

JPBC-3A Low Mass

JPBC-3SPA Polished Low-Mass

This is a drop-in replacement for the standard 5.56/300 BLK AR-15 bolt carrier that allows the shooter to choose between sup-pressed (S) and unsuppressed (U) settings without any permanent modifications to the firearm. Eliminates the need to change gas block, buffer, or any other component! The U setting enables nor-mal BCG operation. The S setting vents gas out the ejection port, eliminating blowback of gas into the shooter's face and inside the receiver. Slightly slows down cycling, so it also reduces wear on components like the buffer, buffer spring, and gas rings. Cuts felt recoil a bit, too. Carrier only - continue using your original bolt. ab

GEMTECH AR-15/M16

SUPPRESSED BOLT CARRIEROne Carrier Ensures Reliable Suppressed or Unsuppressed

Operation

#100-020-618AV 5.56/300 BLK Suppressed Bolt Carrier, 1A209P43 � � � � � � � � � � � � � � � � $ 247.99

Lightweight, stainless steel bolt carrier has signifi-cantly lower reciprocating mass than a standard car-

rier for softer recoil impulse on competition rifles. Helps limit felt recoil to get you back on target for fast follow-up shots. Lightening cuts reduce weight without sacrificing strength, and the forward assist serrations have been omitted for competition use. Extra-wide carrier rails have extra bearing surface to improve bolt alignment and reduce wear. Comes with carrier key installed and staked, and features a dust cover notch. JPBC-3 is available with bright pol-ished finish or black QPQ finish, a five-step process that produces an exceptionally hard, wear-resistant surface with natural lubricity. JPBC-4SP comes in bright polished. For best performance and to minimize impact wear, use JPBC-3 styles only in rifles with JP Low-Mass Recoil Buffer, Speed Hammer, and Reduced-Power Spring Kit, all available separately. abSPECS: 416 stainless steel. JPBC-3 – Black QPQ or bright polished (SP) finish. Fits AR-15. JPBC-4SP – Bright polished finish. Fits JP LRP-07 and DPMS LR-308 platforms and requires JP or DPMS subcomponents only, including firing pin, cam pin, firing pin retainer, bolt assembly. Both styles are recommended for competition rifles only.

JP ENTERPRISES AR-15/AR-STYLE .308

LOW-MASS BOLT CARRIERReduces Reciprocating Mass To Soften Recoil

#452-000-039AV JPBC-3 Black Low-Mass Bolt Carrier, 2E204N14 � � � � � � � � � � � � � � � � � � � � � � � � $ 214.99

#452-000-156AV JPBC-3SP Low-Mass Bolt Carrier, 2E204A14 � � � � � � � � � � � � � � � � � � � � � � � � 214.99

#452-000-157AV JPBC-4SP Low-Mass .308 Bolt Carrier, 2E243J16 � � � � � � � � � � � � � � � � � 256.99

JP’s one-piece gas ring combines a superb gas seal with a very low-friction relationship between rings and bolt carrier. Decreased resistance between rings and carrier results in a direct increase in the rifle’s reliability. In addition, the ring’s precision-ground surface is con-toured to use the cycling action itself to scrape the walls of the carrier, so it combats carbon buildup with every shot. Ideal for use on the JP EnhancedBolt™. JPGR-223 fits bolts on rifles chambered in .223/5.56mm NATO. JPGR-308 fits rifles chambered in .308 Win/7.62mm NATO. ab

JP ENTERPRISES AR-15/M16/AR-STYLE .308

ENHANCED GAS RINGSFights Carbon Fouling & Helps

Maintain Reliability

#452-000-170AV JPGR-223 Gas Rings, 2E9K32 � � � � � � � � �$ 9.99#452-000-169AV JPGR-308 Gas Rings, 2E9P32 � � � � � � � � � 9.99

Grooves machined into the underside of this bolt carrier ensure free movement and operation, especially in extremely adverse - dirty/dusty/sandy - conditions. These grooves help to channel away the debris, keeping your rifle's mission-critical bolt/carrier unit op-erating, even when you haven't been able to give it a proper clean-ing. Carrier only, no bolt, gas key, firing pin, or other small parts. ab

KNIGHT'S ARMAMENT AR-15/M16

SR-16 "SAND CUTTER" BOLT CARRIER

Provides Reliable Function In Adverse Conditions

#100-027-612AV M16 "Sand Cutter" Bolt Carrier, 4C249N00 � � � � � � � � � � � � � � � � � � � � � � � $ 249.00

Faxon set out to create a lightweight 5.56 NATO/.]300 Blackout BCG with no compromises in strength or reliable function. The M16-type carrier (full-auto compatible) is machined from 8620 carbon steel, leaving out every last milligram of unnecessary metal to re-duce weight without sacrificing structural integrity. The bolt is made from 9310 tool steel and fully MPI checked to ensure it is sound and without hidden defects. Bolt lugs are chamfered 45° to ensure reliable operation even with max-pressure handloads. Don't worry - the 4140 steel carrier key is securely staked and has Permatex on the screw threads. Extractor is machined from S7 tool steel. Bolt has a tough QPQ salt bath nitride finish that resists corrosion and provides a natural slickness that resists wear and requires less gas pressure to operate. Carrier available with black QPQ, even more wear-resistant gold Titanium Nitride (TiN), or exceptionally hard, wear- and heat-resistant multi-color Chameleon PVD finish. ab

FAXON FIREARMS AR-15/M16

GUNNER LIGHTWEIGHT BOLT/CARRIER GROUP

Fast-Cycling, Reliable & Smooth; Unique

Looks, Too

#100-022-858AV Lightweight 5.56 Bolt/Carrier Group, Black QPQ, 1D231D39 � � � � � � � � � � � � � $ 248.99

100-030-947AV Lightweight 5.56 Bolt/Carrier Group, TiN, 1D277H64 � � � � � � � � � � � � � � � � � � � 284.99

100-030-948AV Lightweight 5.56 Bolt/Carrier Group, Chameleon PVD, 1D277E64 � � � � � � � � 284.99

Chameleon PVD

Black QPQ

Titanium Nitride

Colors

Foxtrot Mike Products bolt/carrier assemblies fit blowback-operated AR-style pistols and carbines. They will work with both semi-auto and full-auto-capa-ble ARs. The carrier is “ramped” to accommodate both standard GI-type and dedicated pistol-caliber hammers. Machined from a single piece of premium 8620H steel alloy, then finished with a deep-penetration salt bath nitride that gives both lubricity and wear-resistance. One-piece construction delivers superb reliabil-ity in blowback-operated ARs. Even has forward assist serrations. Comes complete, with firing pin and extractor installed, and ready to go into your pistol caliber carbine build. Separate models for rifles that use Glock® pistol or Colt SMG magazines. ab

FM PRODUCTS AR-15

PISTOL CALIBER BOLT/CARRIER ASSEMBLIES

Aids in Smooth, Reliable Cycling of Your AR-15 Pistol

#100-024-845AV FM-9 9mm Bolt/Carrier, Glock® Mag, 6D99B00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 99.00

100-027-615AV FM-9 9mm Bolt/Carrier, Colt SMG Mags, 6D99B00 � � � � � � � � � � � � � � � � � � � 99.00

100-035-377AV FM-45 .45 ACP Bolt/Carrier, Colt SMG Mag, 6D102C79� � � � � � � � � � � � � � � � � � � � 109.99

Items

AR

-15/M

16


brownells.com

GA

S SYST

EM

CO

MP

ON

EN

TS

Complete bolt assem-bly is precision machined from an ultra-strong steel alloy to last up to 10 times longer than a standard carbon steel bolt, minimizing the risk of bolt failure during a critical engagement. SAE 9310 steel has a tough, ductile inner core highly resistant to stress fracturing, with a hard outer surface that resists galling and wear, to ensure a service life of up to 60,000 rounds. This is the same steel used in the transmission gears of Formula 1 race cars, so it’s ideal for high-impact, high-heat applications like sustained full-auto fire. Meticulously machined radiuses on all 90-degree corners on the locking lugs help distribute impact force evenly and further reduce risk of premature wear and cracking. Fully supported extractor face and precise extractor engagement further ensure smooth, reliable cycling. JPBC Bolt Completion Group adds to the EnhandeBolt a firing pin, cam pin, and firing pin retaining pin. High Pressure (HP) .308 JPBC has a reduced-diameter firing pin hole and a matched .062" low-mass firing pin to help eliminate primer flow and risk of pierced primers, allowing a broader choice of SAAMI/NATO spec ammunition. Does not allow use of “overloaded” ammunition that produces pressure exceeding SAAMI specifications. abSPECS: SAE 9310 nickel-chromium-molybdenum steel, hard Nickel-Boron (.223 & 6.5 models) or black Magnesium Phosphate (.308 models) finish. Fully assembled with extractor, gas rings, ejector, pins, and springs installed. .223 fits AR-15/M16 and clones. Fully compatible with any mil-spec bolt carrier. 6.5 Grendel fits rifles with a mil-spec bolt carrier and 6.5 Grendel sub-components. .308 fits JP LRP-07 and DPMS LR-308 rifles only. 9mm fits 9mm-chambered rifles with standard .223 hammer; do not use a dedicated 9mm hammer.


ENHANCEDBOLT™ BOLT ASSEMBLYDesigned For Extra-Long

Service Life

#452-000-111AV .223 EnhancedBolt, 2E112I56 � � � � � � �$ 118.99#452-000-163AV .223/5.56 Bolt Completion Group,

2E130E59� � � � � � � � � � � � � � � � � � � � � � � � � � 137.99#452-000-162AV 6.5 Grendel EnhancedBolt,

2E126B09 � � � � � � � � � � � � � � � � � � � � � � � � � 132.99#452-000-166AV 6.5 Grendel JPBC Bolt Completion

Group, 2E140L99 � � � � � � � � � � � � � � � � � � 147.99#452-000-113AV .308 EnhancedBolt, 2E157K61 � � � � � � � 166.99#452-000-164AV .308 JPBC Bolt Completion Group,

2E202G65 � � � � � � � � � � � � � � � � � � � � � � � � � 213.99#452-000-165AV .308 JPBC HP Bolt Completion

Group, 2E198D46 � � � � � � � � � � � � � � � � � � 213.95#452-000-167AV 9mm EnhancedBolt, 2E225P16 � � � � � � 237.99

Updated design of the stan-dard AR-15 bolt features a fully supported breech face and a dual-spring extractor system for extra strength and reliability to handle the 6.8 Remington SPC cartridge. Machined from an extremely hard steel alloy normally used in high-stress/heat applications like race car transmissions, then shot-peened and x-rayed for flaws before plating with a nickel-boron (NiB) coating. NiB coating significantly reduces friction coefficient, so the bolt is less likely to be hung up by fouling, and wear-resistance is greatly enhanced. Super-slick surface makes cleanup easy because carbon and gunk have a hard time sticking to it. abSPECS: Ultra-hard steel alloy, nickel-boron plated, silver finish. Comes complete with ejector, extractor, and gas rings installed. Fits a standard AR-15 carrier.

LWRC INTERNATIONAL AR-15/M16

6.8 SPC ADVANCED COMBAT BOLTUpgraded Design For Increased Durability &

Dependability

#100-008-044AV 6.8 SPC Advanced Combat Bolt, 2C123A07 � � � � � � � � � � � � � � � � � � � � � � � � $ 145.99

Complete replacement bolt is configured with an oversized firing pin to elimi-nate misfires and hangfires that can occur in 7.62x39-chambered AR-15 rifles, particularly when using imported ammunition with hard primers. In addition, an extractor D-ring has also been installed to ensure vigorous, reliable extraction. Set includes the firing pin and the bolt with the gas rings, ejector, extractor, and D-ring installed. abSPECS: Bolt - Hardened carbon steel, matte black phosphate finish. Includes firing pin, and bolt head with extractor w/D-ring, ejector, and gas rings in-stalled. For use in AR-15 type rifles chambered for the 7.62x39mm cartridge.

MGI AR-15

ENHANCED RELIABILITY 7.62X39 BOLT

#100-010-977AV Enhanced 7.62x39 Bolt w/Firing Pin, 1D105K38 � � � � � � � � � � � � � � � � � � � � � � � � �$ 132.99

Specially Designed For Reliable Ignition In AR’s Chambered For

The AK Round

Designed to work with both Glock® pistol and Colt SMG "stick" magazines, Stern's dedicated pistol-caliber bolt/carrier assemblies will work with a standard mil-spec AR-15/M16 charging handle. They are designed to work well single-stage triggers that have short re-sets, and they're compatible with the JP silent captured spring, Law Tactical folding stock adapter, and Echo triggers. They're machined from hardened 8620 AISI steel. Each bolt comes completely as-sembled, including all necessary pins and springs. Compatible with all standard and Glock-pattern upper receivers, and with standard AR-15/M16 charging handles. Available with a matte black Manga-nese Phosphate Parkerized finish OR an extra-durable combination Nickel-Boron (NiB) and black Melonite finish. Unless otherwise in-dicated, Stern PCC BCGs will work in both full-auto and semi-auto rifles; a semi-auto-ONLY 9mm model is also available. ab

STERN DEFENSE AR-15

COMPLETE PISTOL CALIBER BOLT/CARRIER ASSEMBLIES

Compatible With Two Popular PCC Magazines

#100-032-658AV 9mm Bolt/Carrier Assembly, Parkerized, 9D129L99 � � � � � � � � � � � � � �$ 129.99

#100-032-659AV 9mm Bolt/Carrier Assembly, NiB/Melonite, 9D169I99 � � � � � � � � � � � � � � � � 169.99

#100-033-219AV 9mm Semi-Auto Bolt/Carrier Assembly, Parkerized, 9D00HRB � � � � � 129.99

#100-032-660AV .40 S&W Bolt/Carrier Assembly, Parkerized, 9D142F99 � � � � � � � � � � � � � � 142.99

Weighing in at just 7.8 oz., Rubber City's complete M16-style bolt/carrier group is one of the lightest on the market today. Made from lightweight Titanium, the carrier's lower reciprocating mass produces less felt recoil, so you keep the rifle under better con-trol, resulting in faster follow-up shots and less fatigue during long shooting sessions. With its M16 profile, carrier will work with stan-dard semi-auto AR-15s, as well as full-auto rifles. Bolt is machined from 9310 carbon steel, mated to a gas key machined from steel billet and properly torqued down and staked. Both the extractor and cam pin are made from tool steel to ensure proper function. The proprietary aerospace nitride coating gives the group enhanced lubricity for smoother operation and excellent wear resistance. ab

RUBBER CITY ARMORY AR-15/M16

TITANIUM BOLT/CARRIER GROUP Optimized For Recoil

Reduction & Less Wear-n-Tear on Receiver

#100-019-396AV Titanium Bolt/Carrier Group , 9D358H99� � � � � � � � � � � � � � � � � � � � � � � � $ 358.99

Matched bolt/carrier set for .223/5.56mm rifles has a FailZero nickel-boron finish applied using proprietary EXO Technology. Nicke-boron is smoother than hard chrome and will not chip, peal, or flake off. Helps reduce friction, so gun cycles more smoothly with minimal lubrication, and allows carbon and fouling to be wiped off easily. Tool steel extractor uses a mil-spec extractor spring with black insert and Viton O-ring to provide highly reliable extraction even with short barrels. Carrier has M16-type full-length shroud on the underside to trip the auto sear on full-auto/burst rifles. Bolt has been shot peened, high pressure tested, and magnetic particle in-spected to ensure the highest level of quality control. abSPECS: Bolt – 158 Carpenter steel alloy, .223/5.56 bolt face. Carrier – 8620 tool steel. Extractor – tool steel. All components have FailZero EXO nickel-boron coating, silver finish. Fits AR-15.

Wear-Resistant FailZero Coating For Reliable, Trouble-Free Service

#100-008-575AV N-B Coated .223/5.56 Bolt/Carrier, 3B185N08 � � � � � � � � � � � � � � � � � � � � � � � � $ 207.99


NICKEL-BORON COATED BOLT/CARRIER GROUP

Matched bolt/carrier set is machined to mil-spec dimensions using the latest manufacturing and quality-control techniques to deliver superb reliability in both semi-auto and select-fire rifles. Car-rier is hard-chromed inside and has an M16-type full-length shroud on the underside to trip the auto sear on full-auto/burst rifles. Bolt is magnetic particle inspected to ensure there are no internal flaws to compromise structural integrity and cause premature failure. Fully staked carrier key and tool steel extractor further aid reliable cycling. Laser-engraved Spike’s Tactical logo on the side of the carrier is vis-ible when the ejection port door is open. abSPECS: Bolt – Carpenter 158 steel alloy. Carrier – 8620 carbon steel, chrome lined. MIL-STD-171 5.3.1.2 phosphate finish. Fits standard AR-15/M16/M4 rifles chambered in .223/5.56 NATO.


STANDARD BOLT & CARRIER SETUltra-Smooth Operation &

Enhanced Reliability

#100-007-035AV .223/5.56 Bolt/Carrier, Phosphate Finish, 3B125P43 � � � � � � � � � � � � � � � � � � $ 134.99

Each WMD bolt-and-carrier set is precisely machined from high-grade steel alloy to government M16 specs, then given WMD’s proprietary NiB-X nickel boron coating that results in a super-smooth, harder-than-chrome surface. NiB-X reduces fric-tion to the bare minimum and is impervious to corrosion and abra-sion. The slick finish also keeps carbon from adhering, so clean up is much faster and easier than with standard parts. Ideal choice for 3-gun competitors and other high-volume shooters. Also available with a matching NiB-X coated hammer for the smoothest cycling. M16 model has extended shroud on the carrier underside to trip the auto-sear on select-fire rifles. abSPECS: Carrier – 8620 carbon steel. Bolt – Carpenter 158 steel alloy. Both have Nickel boron finish, silver. Extractor includes black buffer, black O-ring, and spring. Fits mil-spec AR-15/M16 upper receiver.

WMD GUNS AR-15

NiB-X™ COATED BOLT/CARRIER GROUP

Self-Lubricating Finish For Outstanding Durability & Resistance To Fouling

#100-010-556AV NiB-X Bolt & Carrier Group, 3C145M82 � � � � � � � � � � � � � � � � � � � � � � � � $ 171.99

#100-010-557AV NiB-X Bolt & Carrier Group w/Hammer, 3C154K52 � � � � � � � � � � � � � � � 181.99

#100-011-664AV M16 NiB-X Bolt & Carrier Group, 3C137A46 � � � � � � � � � � � � � � � � � � � � � � � � 172.99

#100-011-665AV M16 NiBX Bolt & Carrier Group w/Hammer, 3C155G61 � � � � � � � � � � � � � � � 179.99

#100-012-192AV NiB-X Bolt, Only, 3C63J68 � � � � � � � � � 72.99#100-009-957AV NiB-X Spare Bolt Cam Pin,

3C9G68 � � � � � � � � � � � � � � � � � � � � � � � � � � 11.39

Complete bolt/carrier assembly for the AR-platform rifles chambered in 6.8mm Remington SPC is drop in ready – just check the headspace and you’re ready to shoot. Constructed of durable 8620 steel alloy for a long service life, the group is crafted to mil-spec tolerances for ultra-reliable operation in nearly any weather or environmental condition. Chrome-lined carrier recess is easy to clean and resists carbon build-up to ensure super-smooth bolt movement. abSPECS: 8620 steel, phosphatized, matte black finish. Fits mil-spec AR-15 rifles chambered for 6.8 Remington SPC.

YANKEE HILL AR-15

6.8MM SPC BOLT/CARRIER GROUPDrop-In Ready For

Smooth, Long-Lasting, Reliable Operation

#100-010-697AV 6.8 SPC Bolt/Carrier Group, 9A202C30 � � � � � � � � � � � � � � � � � � � � � � � � $ 222.99

BO

LTS &

CA

RR

IER

S

Our premium stainless steel gas tubes have an extremely du-rable Black Nitride finish that increases corrosion resistance, wear resistance, fatigue strength and cosmetic appeal. These tubes look great under a handguard because they match the rest of the black AR-15 parts and are more durable than standard gas tubes. Available in pistol, carbine, mid-length, and rifle lengths. Does not include a roll pin. ab

AR-15/M16

BLACK NITRIDED GAS TUBES

#078-000-332AV AR-15 Gas Tube Carbine Black Nitride, 1Z7B99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 8.99

#078-000-333AV AR-15 Gas Tube Mid-Length Black Nitride, 1Z8A99 � � � � � � � � � � � � � � � � � � � � � 9.99

#078-000-334AV AR-15 Gas Tube Rifle Black Nitride, 1Z9E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 10.99

#078-000-331AV AR-15 Gas Tube Pistol Black Nitride, 1Z7I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8.99

Extremely Strong & Durable; Black Finish Makes Them Nearly Invisible Under Handguard

AR

-15

/M16


SINCE 1939GA

S SY

STE

MS

CO

MP

ON

EN

TS

Easy-to-install gas block features an inte-gral fixed rail and a modular design that allows fast installation and removal of up to three, additional Picatinny rails for mounting lasers,

lights, night vision optics, back-up sights, and a variety of other tactical accessories. Side and bottom rails attach easily with two screws, so you can configure the unit for each mission’s require-ments. Precision-machined from rugged, 6061 billet aluminum for superior strength without weighing down your weapon. Mounts securely to barrel with three, hardened steel setscrews. abSPECS: Aluminum, matte black, hardcoat anodized finish. Fits standard .750" (19mm) dia. barrels. Gas Block - 17/8" (4.8cm) long, 1" (2.5cm) wide, 17/16" (3.6cm) high. Gas Block Kit – Includes modular gas block with three add-on rails. 17/8" long, 27/64" (5.3cm) wide, 2" (5.0cm) tall.

BAYONET LUG - Bolts directly to Modular Gas Block to allow installation of a mil-spec bayonet or lug-mounted bipod on your AR-15. Installs and removes easily with an Allen wrench so you can configure your rifle’s accessory package at any time to fit mission requirements. Precision ma-chined from 4140 steel for optimal strength and rigidity. Includes mounting screws. Modular Gas Block not included.SPECS: Steel, matte black Parkerized finish. 25/16" (5.9cm) long, 1/2" (1.3cm) wide, 21/64" (8.3mm) tall. Allen wrench not included.#080-000-439AV Modular Gas Block Lug, 8K13K19 � � � � �$ 14.99

Unique, Modular Design For Ultimate Customization

#080-000-382AV Modular Gas Block, Only, 8K30A99 � � �$ 33.99#080-000-383AV Modular Gas Block Rail, Per Each,

8K12D99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.99#080-000-384AV Modular Gas Block Kit, 8K51L99 � � � � � � 54.99

ab

AR-15/M16

MODULAR GAS BLOCK

Short gas tube is made specifically for AR pistols. Fits currently available 61/4" to 71/2" pistol barrels. Also a handy alternative for re-ally short carbine barrels where a standard carbine-length tube is too long. abSPECS: Stainless steel, natural finish. 63/4" long.

DOUBLE STAR AR-15

PISTOL-LENGTH GAS TUBE

The Right Tube For Your AR Pistol Or SBR Build

#100-008-042AV Pistol-Length AR Gas Tube, 2Z12G63 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 14.99

Luth-AR factory replacement stainless steel gas tubes. Avail-able in pistol-length, carbine-length, mid-length, and standard rifle-length. Fits standard AR-15 rifles. Luth-AR factory replacement stainless steel gas tubes. Available in pistol-length, carbine-length, mid-length, and standard rifle-length. Fits standard AR-15 rifles. Luth-AR factory replacement stainless steel gas tubes. Available in pistol-length, carbine-length, mid-length, and standard rifle-length. Fits standard AR-15 rifles. ab

LUTH-AR AR-15/M16

STAINLESS STEEL GAS TUBES

#100-028-044AV Gas Tube, Rifle, 3D13I56 � � � � � � � � � � � � �$ 15.03#100-028-045AV Gas Tube, Carbine, 3D11A23 � � � � � � � � � � 12.21#100-028-046AV Gas Tube, Pistol, 3D10P79 � � � � � � � � � � � 11.74#100-028-047AV Gas Tube, Mid-length, 3D12M03 � � � � � � 13.15

Your Rifle Won't Work Without It

Melonite coating on hardened stainless steel gas tubes gives ex-tra heat- and corrosion-resistance for an exceptionally long service life. Matte black finish enhances the tactical profile of rifles with open handguards by eliminating a source of accidental light reflection. Includes gas tube roll pin. abSPECS: 304 stainless steel, Melonite coated, matte black. Available in Pistol, Carbine, Mid- Length, and Rifle lengths.


GAS TUBES

Melonite Coated For Extra Heat Resistance & Elimination Of Light Reflection

#100-008-576AV Melonite-Coated Gas Tube, Pistol, 3B13M59 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 15.99

#100-008-577AV Melonite-Coated Gas Tube, Carbine, 3B13C17 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.99

#100-008-578AV Melonite-Coated Gas Tube, Mid-Length, 3B15G59� � � � � � � � � � � � � � � � � � � � 15.99

#100-008-579AV Melonite-Coated Gas Tube, Rifle, 3B13D17 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.99

Stainless steel gas tubes are salt bath nitrocarburized for extra resistance to heat and corrosion. Nitromet finish gives added du-rability with a surface hardness of Rc 55. Installs easily and available for carbine and mid-length gas systems. abSPECS: Mil Spec 304 stainless steel, matte black Nitromet finish. Carbine – 93/4" (24cm) long. Mid-Length – 113/4" (30cm) long.

WMD GUNS AR-15/M16

NITROMET GAS TUBE

Special Coating Gives Extra Resistance To Heat & Corrosion

#100-010-978AV Nitromet Carbine Gas Tube, 3C14P00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 16.89

#100-010-979AV Nitromet Mid-Length Gas Tube, 3C14L45� � � � � � � � � � � � � � � � � � � � � � � � � � � 16.99

#100-011-964AV Nitromet Rifle Gas Tube, 3C14J90 � � � 17.89

Slim replacement for factory gas block provides maximum clearance for optics and free-float handguards. Set-screws, gas tube mounting pin, and in-stallation instructions included. Mk 12 is an exact copy of the gas manifold on the Mk12 Mod 1 and Mk 18 Mod 1 Special Purpose Rifles used by the U.S. Army and

Navy. Made from 416 stainless steel with a tough, wear-resistant black oxide finish, and fits barrels with .750" O.D. Mk 12 Style has the same appearance as the Mk12 Mod 1 gas manifold, and fits barrels with .875" O.D. abSPECS: 416 stainless steel. Mk 12 fits .750" (19mm) O.D. barrels. Black finish. 1" (25.4mm) long, 7/8" (22.2mm) wide, 17/16" (36.5cm) high. Mk 12 Style fits .875" (22.2mm) O.D. barrels. Natural silver finish. 1" (25.4mm) long, 1" wide, 17/16" high.

BADGER ORDNANCE AR-15/M16

ULTRA LOW PROFILE GAS BLOCKProvides Maximum Clearance For Optics Or Free-Float Handguards

#093-000-026AV Mk 12 Gas Block, 3K61H39 � � � � � � � � � � $ 64.99#093-000-027AV Mk 12-Style Gas Block, 3K63P99 � � � � 68.99

Designed to fit AR-15 and M16 barrels, the BCM low-profile gas block is machined from high quality steel to Mil-Spec toleranc-es. Gas block includes set screws for mount-ing and a phosphate finish for corrosion and wear resistance. Available with either .625" or .750" inside diameter. ab

SPECS: Machined steel, phosphate finish. 1.34" high, (3.4cm), 1" long (2.5cm). Includes set screws for mounting.

BRAVO COMPANY AR-15/ M16/M4

LOW-PROFILE GAS BLOCKHeavy Duty Low Profile Block Fits Under

Most Handguards

#100-014-215AV Low-Profile Gas Block, .750", 1E42J97 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 44.99

#100-014-216AV Low-Profile Gas Block, .625", 1E42N97 � � � � � � � � � � � � � � � � � � � � � � � � � � 44.99

Integral gas block and folding front sight rep-licates the appearance of the classic factory front sight tower, yet folds neatly out of the way when

it’s not needed. Eliminates need to purchase a railed gas block and a separate rail-mount folding sight. Deploys and locks securely in place as quickly as any flip-up combat sight. To fold, press straight down on the top of the diagonal rear support to release the lock and pull back on the sight tower. Standard A2-type sight post, so it works with any factory-height rear sight. Easy to install; dual clamp-ing rings fit standard .750" diameter barrels, and hex-head bolts (hex wrench included) provide plenty of clamping force to make sure the sight doesn’t shift and change point of aim. Steel base/gas block provides exceptional resistance to erosion by hot gases. Includes bayonet lug, and rear clamping ring drilled to accept sling swivel pin. Aluminum tower minimizes weight without sacrificing strength. abSPECS: Steel and aluminum, matte black finish. Fits barrels that are .750" O.D. at the gas port.

A.R.M.S. AR-15/M16

#41-BL GAS BLOCK & FOLDING FRONT SIGHT

Ruggedness & Appearance Of Standard Sight; Folds Down When Not Needed

#100-003-742AV #41-BL Gas Block/Folding Front Sight, 3A150G51 � � � � � � � � � � � � � � � � � � $ 168.99

Low-profile gas block fits under just about any extended handguard while ensuring proper gas flow to keep your rifle cycling reliably. Precision ma-

chined from lightweight, yet tough, 6061 T6 aluminum, so it won’t add unwanted forward weight. Slide over the barrel and anchor in position by tightening the three, flush-mounted steel hex screws on the underside to ensure it won’t shift even under sustained full-auto fire. For installations where the gas block is exposed, rounded edges give a “melted” profile that won’t snag on foliage or other gear. Hardcoat anodized for additional strength and resistance to surface wear; matte black finish blends with most factory gun finishes. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. In¬cludes (3) hex-head screws and instructions. .750" - Fits barrel with .750" O.D. at gas port. 1.25" (3.2cm) long, 1.35" (3.4cm) overall height, .95" (2.4cm) outside width. .8 oz. (23g) weight. .936" - Fits barrel with .936" (2.38cm) O.D. at gas port. 1.25" long, 1.5" (3.8cm) overall height, 1.15" (2.9cm) outside width. 1 oz. (28g) weight.

AR-15/M16

LOW-PROFILE GAS BLOCK

Lightweight, Minimal Profile To Fit Under Tactical Handguards & Free-

Float Tubes

#080-000-528AV .750" Gas Block, 8K27E99 � � � � � � � � � � � �$ 34.99#080-000-700AV .936" Gas Block, 8K36M39 � � � � � � � � � � � 39.99

Our lowest low-profile steel gas block fits a .750" gas block journal and is machined from 4140 carbon steel before receiving its tough, corrosion- and wear-resistant black Nitride finish. Dual setscrews secure gas block to barrel. Honed interior allows for smooth installation. Does not include roll pin. ab

AR-15/M16

NITRIDE-FINISH LOW-PRO GAS BLOCK

Adds Bare Minimum of Bulk to Front of Your Gun - Nitrided for Strength & Wear

Resistance

#078-101-158AV Nitrided Lo-Pro Gas Block, 8G18G19 � �$ 19.99

Hardened stainless steel gas tube resists heat and corrosion and ensures consistent gas flow to help your rifle cycle properly. Precise construction helps ensure quality for custom rifle builds. Vent hole size is optimized for semi-auto AR-15 operation. abSPECS: Stainless steel, natural finish. 93/4" (25cm) long. For use on rifles with carbine-length gas systems.

LES BAER AR-15/M16 GAS TUBE

Precision-Made Carbine Gas Tube

#124-000-004AV Les Baer Carbine Gas Tube, 4B11J53 � �$ 13.89

This is the correct-length gas tube for use with our BRN-10™ Retro Rifle™ barrels with that use

a rifle-length gas system. Of course, it's also a direct replacement part for a BRN-10 rifle. Tube itself is hardened stainless steel with a nicely polished surface that doesn't give fouling much "tooth" to grab onto. Correctly "kinked" to fit inside the BRN-10 handguard. Roll pin IS included. ab

AR-308

BRN-10™ GAS TUBE KIT

Factory Original Tube for Your 308 Retro Rifle™

#078-000-535AV BRN-10 Rifle-Length Gas Tube, 8G10L00 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 13.99

This is an ultra-low-profile steel gas block for skinny .625" O.D. barrels. Weighs a mere .48 oz. because it is pre-cision machined from Grade 5 Titanium. Distinctive "C" shape profile saves weight while maintaining full functionality - looks unique, too. Clamps to barrel with two stainless steel setscrews. ab


LIGHTWEIGHT TITANIUM GAS BLOCK

Minimal Bulk, Unique Appearance

#100-800-005AV Titanium .750" Gas Block, 6D85A37� � �$ 89.95#100-800-004AV Titanium .625" Gas Block, 6D80F38 � � 85.00

AR

-15/M

16


brownells.com

Lightweight gas blocks with integral MIL-STD 1913 Picatinny rails expand your AR’s accessory mounting options with-out adding excess weight or bulk. Lets you mount a backup iron sight, weapon light, laser sight, folding bipod, vertical grip, and other tactical accessories. Standard models fit barrels with .750" O.D. at gas port. 2-Rail – Two-piece, clamp-on design with top and bot-tom rails doesn’t require removal of flash hider to install or remove. Clamps securely in place with four hex-head cap screws for a rock-solid installation that won’t shift under recoil. Circular cutouts in the sides reduce weight without compromising strength. 4-Rail – Innovative, slim-line design adds side rails, yet is only .05" wider than the 2-Rail model and actually weighs less. Slides over barrel and anchors in place with three recessed hex-head screws for a tight friction fit. Installation requires removal and re-installation of muzzle attachment. abSPECS: Standard – 6061 T6 aluminum, hardcoat anodized. Fits barrels with .750" O.D. 2-Rail – Matte black finish. 17/8" (4.8cm) long, 1.2" (3cm) wide, 13/4" (4.5cm) high. 2.6 oz. (74g) weight. 4-Rail – Satin black PTFE-im-pregnated finish. 17/8" long, 11/4" (3.2cm) wide, 13/4" high. 2.2 oz. (63g) weight.


ACCESSORY RAIL GAS BLOCKSSecure Forward Accessory

Mounting With Minimal Weight & Bulk; 2- & 4-Rail

Models

#100-004-516AV 2-Rail Std. Gas Block, 2Z60J38 � � � � � � $ 66.99#100-004-517AV 4-Rail Std. Gas Block, 2Z59K77 � � � � � � 64.99

High-quality replacement for HBAR-style front sight housing includes bayonet lug, so you can up-grade a rifle manufactured during the now-expired Assault Weapons Ban to authentic military appear-ance. Forged from C1137 steel, then heat-treated for superior strength before final machining to military specifications. Ready to accept an A1- or A2-type front sight post, spring, and detent of your choice. Hole for sling swivel rivet is pre-drilled. Holes must be drilled for setscrews or taper pins for precise fit to your gun. Matte black Parkerized finish matches standard mil-spec finish. Fits both M16A2 and M4 contour heavy barrels currently used by the U.S. Military. abSPECS: Forged C1137 steel, matte black Parkerized finish. Height from top of barrel to top of sight housing without blade installed - 1.9" (4.8cm). Fits M16A2 and M4 contour barrels with .750" (19.1mm) O.D. at gas journal.

DOUBLE STAR AR-15

GAS BLOCK/FRONT SIGHT TOWERForged Steel Replacement With Integral

Bayonet Lug

#100-002-413AV Gas Block Front Sight, HBAR-Type, 2Z30B00 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 32.99

Low profile gas block made from long wearing steel sheds all un-nec-essary weight and bulk; helps keep your race gun’s muzzle light, fast and extremely pointable. Low profile will not interfere with optics or full length

handguard tubes. Secures to the barrel with dual socket head set screws and accepts all Mil-spec gas tubes and roll pins. Drilling points are indexed on the side of the block to allow retention with factory issue taper pins, block requires drilling and reaming. Covers the taper pin holes if the block is replacing a standard front sight base. Steel construction ensures that the block will hand up to the high heat encountered at the gas port. Includes two starter holes for pinning. Two starter holes for pinning the gas block to the barrel gives the user a more permanent mounting option. abSPECS: Machined 1045 steel, Parkerized, matte black finish. 1.9" (4.8cm long) 90" (22mm) wide, 1.42" (3.6cm) high. Fits barrels with .750" O.D. at gas port.


RACE GUN GAS BLOCKMinimal Weight & Bulk For Hard-

Running Competition Rifles

#100-009-882AV Race Gun Gas Block, 2Z46P45 � � � � � � � $ 57.99

This gas block provides a "double threat" for the competition shooter: control of the gas flow so you can find the sweet spot in fine-tuning your rifle's cycling. And a minimal profile that lets you put this gas block under just about any handguard. The stainless steel adjustment screw is coupled with brass lock-ing screw that won’t damage the threads.

Self-tapping setscrews ensure a secure fit to the barrel with a per-fect seal. If your installation leaves the block visible, the black nitride finish looks good and it's durable. abSPECS: Machined 1045 steel, hard nitride coated, matte black. 1" long x .960" wide. Fits barrels with .750" O.D. at gas port. Includes instructions and two Allen wrenches.

Ideal For Competition Shooters

#100-015-286AV Adjustable Gas Block, 2Z49B72� � � � $ 50.99

DOUBLE STAR AR-15/M16 LOW PROFILE ADJUSTABLE GAS BLOCK

Compact gas block clamps securely to barrel with a unique three-point at-tachment system to provide a solid ac-cessory mounting platform and ensure proper gas system alignment for reliable cycling. Precision machined from high-grade 6061 T6 aluminum for an ideal combination of strength and low weight, with an integral MIL STD 1913 Picatinny rail on the top-side. Anchors to the barrel with a pair of hex-head setscrews on the underside, plus a third screw on top to ensure a superior gas seal and resist unwanted movement that can impair gas system function. Streamlined design has clean, good-looking, angular lines with all exposed edges radiused to eliminate sharpness. Mil-spec hardcoat anodized for superior surface strength and wear resistance with an even, matte black finish that matchesmost manganese phosphate Parkerized barrel finishes. Models available to fit three common bar-rel outside diameters: hard-to-find .625" for A1 barrels, .750" for H-Bar and similar-style barrels, and .937" for bull barrels. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. All models 1.875" (cm) long. Rail heights are measured from top of barrel to top of rail. .625" - 1" (2.5cm) wide, 1.5" (3.8cm) overall height, .600" (1.5cm) rail height. 3 oz. (84g) weight. .750" - 1" wide, 1.5" overall height, .545" (13.8cm) rail height. 2.6 oz. (73g) weight. .937" –1.25" (3.2cm) wide, 1.625" (4.1cm) overall height, .445" (11.3cm) rail height. 2.5 oz. (71g) weight.

ADJUSTABLE GAS BLOCK - Adjustable version of Double Star's Picatinny gas block lets you reduce the recoil of your rifle by fine tuning the bolt velocity to match specific loads. Self-tapping set screws on the bottom ensure a secure barrel fit while the extra top set screw ensures a perfect gas seal. Stainless steel adjustment screw is held in place with a brass locking screw to prevent damage to the threads. SPECS: 6061 T6 aluminum, hard coat anodized, matte black. .750" (1.9cm) inside diameter. #100-009-514AV Adjustable Picatinny Gas Block,

2Z49H33 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 50.99


PICATINNY RAIL GAS BLOCKEnsures Reliable Gas Flow; Models For Three Popular Barrel Diameters

#100-004-537AV .625" Picatinny Gas Block, 2Z28E31 � � $ 29.99#100-004-536AV .750" Picatinny Gas Block, 2Z26P77 � � 29.99#100-004-535AV .937" Picatinny Gas Block, 2Z29N98 � 35.99#100-009-514AV Adjustable Picatinny Gas Block,

2Z49H33 � � � � � � � � � � � � � � � � � � � � � � � � � � 50.99

ab

These ultra-low profile gas blocks will fit under just about any free-float hand-guard and are ideal companions for any barrel with a standard diameter gas block journal. Machined from high-strength, erosion-resistant steel, these blocks have side cutouts to reduce weight, while they clamp to the barrel with not two but three

hex head screws so they will not shift no matter how many high-pressure rounds you put downrange. (Faxon recommends secur-ing the screws with Loc-Tite or similar thread-locking compound.) Matte black Nitride finish matches Faxon barrels. ab


LOW-PROFILE GAS BLOCKBare Minimum of Bulk; Securely

Anchored By 3 Screws

#100-022-859AV .750" Low-Profile Gas Block, 1D27D85 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99

#100-022-860AV .625" Low-Profile Gas Block, 1D33M42 � � � � � � � � � � � � � � � � � � � � � � � � � � 35.99

One-piece, low profile, steel gas block fits under most free-float handguards for a clean, uncluttered look. Models available to

fit .625", .750" and .936" O.D. barrels. Locks securely to barrel with three steel setscrews. abSPECS: 4140 billet steel, manganese Parkerized finish, matte black. .625" – 113/16" (4.6cm) long, 13/8" (3.4cm) high. 2.5 oz. (71g) wt. .750" – 13/4" (4.4cm) long, 13/8" high. 3.6 oz. (102g) wt. .936" – 113/16" long, 11/2" (3.8cm) high. 3.6 oz. wt.

PICATINNY RAIL GAS BLOCK - Steel gas block with integral Picatinny rail has extra height that lets you mount a flip up or co-witness front sight on the same plane as the receiver rail of your flattop AR-15/M16. Add a Picatinny rail handguard to have a continuous rail extending from the receiver to the gas block for superb accessory mounting flexibility. Precision ma-chined from tough 4140 billet steel to stand up to tens of thousands of rounds without eroding. Fits .750" O.D. barrels, and locks securely to barrel with three setscrews.SPECS: 4140 steel, dark gray Parkerized finish. 113/16" (4.6cm) long, 113/16" high. Fits .750" O.D. barrels. 6.2 oz. (175g) weight.

#100-003-073AV Steel Picatinny Rail Gas Block, 2A62J30 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 64.99

MIDWEST INDUSTRIES AR-15/M16

STEEL GAS BLOCKSOne-Piece Design & Tough Steel

Construction

#100-008-248AV .625" Low Profile Gas Block, 2A38I57 � � $ 39.99#100-002-854AV .750" Low Profile Gas Block, 2A40L93 � � 42.99#100-004-908AV .936" Low Profile Gas Block, 2A38P57 � � 39.99

ab

Minimal-bulk gas block fits easily under most free-float rails. All-steel construction provides plenty of strength to resist erosion from hot gas. Precisely machined for a close slip fit on standard .750" OD barrels. Includes mounting hardware and instructions. Gun-smith installation recommended. abSPECS: Stainless steel, with Black Nitride finish (SS Blk). Also available in carbon steel (CS), with matte black finish. 1" (2.5cm) long, 1.4" (3.6cm) high. Fits barrels .750" O.D. at gas port.

GEISSELE AR-15/M16

SUPER GAS BLOCK

Low Profile Fits Easily Under Long Free-Float Tubes

#100-014-198AV Super Gas Block, SS BLK, 7B69L00 � � � $ 69.00#100-014-199AV Super Gas Block, CS, 8Z39K00 � � � � � � 39.00

Replaces the factory front sight/gas block and allows you to tune the gas system for smoother cycling and operation. Especially critical on match and varmint rifles when shooting both factory and custom-loaded am-munition. Simple setscrew lets you control the gas flow, so you can customize the setting for each load. Hex head setscrews clamp the block securely to the barrel. Installation instructions included. features a topside Picatinny rail for mounting flip-up front sights and other acces-sories. Low Profile model fits under handguard on .750" barrels. Rugged, all-steel construction resists gas erosion and helps maintain rifle’s weight distribution. Heavy Low Profile alumi-num block fits under handguard on barrels with .936" O.D. Eight Torx T15 screws securely clamp the block to the barrel. A2-Style – Retains the classic look of military rifles and carbines. Two side-mount hex head screws clamp the block securely to barrels with .750" O.D. at the gas block position. Rugged, stainless steel construction resists gas ero-sion and helps maintain rifle’s weight distribution. Hard, abrasion-resistant black oxide finish. abSPECS: Low Profile - 416 stainless steel, natural silver or matte black finish. 17/8" long, 1" (2.5cm) wide. .750" I.D. Heavy Low Profile - Aluminum, hard-coat anodized, matte black. 17/8" (4.7cm) long, 17/16" (3.6cm) wide. .936" I.D. 2.6 oz. (74g) weight. Minimum 1.750" handguard I.D. recommended for proper clearance. A2-Style - 416 stainless steel, matte black oxide finish. 17/8" long, 7/8" (2.2cm) wide, 33/8" (8.6cm) high, .750" I.D.

Pressure Adjustable For Smooth Cycling

Low Profile

#452-000-177AV Low-Profile Gas Block, SS, 2E67F02 � � $ 75.99#452-000-148AV Low-Profile Gas Block, Blk SS, 2E72G05 � � 75.99#452-000-122AV Heavy Low-Profile Gas Block, Alu,

2E81A85 � � � � � � � � � � � � � � � � � � � � � � � � � � � 85.99#452-000-065AV A2-Style Gas Block, Alu, 2E136F43 � � � 142.99

Heavy Low Profile

A2-style

JP ENTERPRISES AR-15/M16

ADJUSTABLE GAS BLOCKS

Luth-AR's minimal-profile gas block snuggles down underneath even nar-row-diameter extended railed forearms, yet keeps your rifle's gas system cycling along. Covers less than 1" of barrel length, with minimal weight. Two mod-els to choose from: one fits standard .750" barrel O.D. at gas jour-nal and the other fits barrels with .936" O.D. at journal. Low-profile steel setscrews secure the block tightly to the barrel so it won't shift around under recoil. Matte black finish. Gas tube pin included. ab

LUTH-AR AR-15


Fits Neatly Under Extended Handguards

#100-028-069AV Low-Profile Steel Gas Block, .750", 3D16F38 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 17.81

#100-028-070AV Low-Profile Steel Gas Block, .936", 3D16C38 � � � � � � � � � � � � � � � � � � � � � � � � � � � 17.81

GA

S SYST

EM

CO

MP

ON

EN

TS

AR

-15

/M16


SINCE 1939

Steel gas block features an adjustable gas port that lets you tune the amount of gas output for reliable extraction and ejection to match your ammo. Adjustment screw closes or opens the port in the block and not the gas tube; drilling of the gas tube is not required. Fits under free float handguards and does not interfere with the sight picture through scopes or red-dot sights. Dual set screws on bottom securely lock the block onto the barrel. abSPECS: 1141 high-strength steel, magnesium phosphate finish, matte black. 1" (2.5cm) long, 1.37"(3.4cm) high, 1 oz. (28g) wt. Fits barrels .750" OD at the gas block position.

PRECISION REFLEX AR-15

ADJUSTABLE LOW-PROFILE GAS BLOCK

Lets You Tailor Extraction & Ejection To Individual Loads

#714-000-019AV Adjustable Low-Profile Gas Block, 4A62N01 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 73.99

Steel gas block lets you adjust the amount of gas flow, so you can tune gas output for reliable extraction and ejection with different ammo types. Brass friction screw holds adjustments without thread locker and won’t mar the adjustment screw. Fits under free-float handguards on .750" O.D. barrels. Dual bottom screws se-cure block to barrel. Requires Allen wrench, not included. abSPECS: Steel, matte black finish. 1" (2.5cm) long. .9" (2.3cm) wide. 13/8" (3.5cm) high. 1.8 oz. (51g) wt.


ADJUSTABLE GAS BLOCKLets You Adjust Gas Output For Reliable

Extraction/Ejection

#100-011-244AV Adjustable Gas Block, 8C55C79 � � � � $ 57.99

Odin's tunable all-steel gas block has a front-facing adjustment screw that gives you 20 clicks of ball-detent adjustment - no setscrews needed.

Simply adjust the screw to allow the amount of gas flow you want and leave it. Works with any caliber AR, as long as the barrel is .750" O.D. at the gas journal. Screw and spring are made from Inconel so they'll handle the erosive effects of high-temperature combustion gas. Black nitride finish matches most barrel finishes. ab

ODIN WORKS AR-15/M16 ADJUSTABLE LOW-PROFILE GAS BLOCK

Ball-Detent Lets You Click To Any of 20 Discrete Gas Flow Settings

#100-022-684AV Adj. Low-Pro .750" Gas Block, 4A78B45 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 84.55

Aluminum or steel gas blocks give the choices you need to cre-ate a custom-built rifle with a mission-specific configuration. Mounts securely to barrel with included setscrews. Clamp-on models squeeze

around the barrel as you tighten the side-mounted setscrews. Slip-on models are anchored by setscrews on the underside. Low Profile fits under a free-float handguard and lets you use a longer on carbine-length barrels for a clean, streamlined look with more gripping sur-face. Extended Nose is like Low-Profile, but with an extended sleeve that covers taper pin holes left by the issue A2-style sight tower. abSPECS: 6061 T6 aluminum, hardcoat anodized, black, or 1018 alloy steel, Parkerized, black. Barrel O.D. measured at gas port.

Minimal Profile To Fit Under Handguard; Models With Integral Accessory Rail

STOCK # TYPE ATTACHMENT BBL. O.D. MATERIAL LENGTH WIDTH HEIGHT WEIGHT PRICE#100-006-899AV Low-Profile Slip-On .625" Steel .95" (24mm) .775" (19.6mm) 1.3" (33mm) 1.4 oz. (40g) 6A27J10 $ 34.99#100-005-337AV Low-Profile Slip-On .750" Steel .95" (24mm) .90" (23mm) 1.4" (36mm) 1.4 oz. (40g) 6A22N95 $ 26.99#100-006-900AV Low-Profile Slip-On .875" Steel .95" (24mm) 1.0" (25mm) 1.4" (36mm) 1.6oz. (45g) 6A31F74 $ 40.99#100-005-339AV Low-Profile Clamp-On .750" Steel .95" (24mm) .90" (23mm) 1.5" (38mm) 1.8 oz. (51g) 6A35L61 $ 44.99#100-008-732AV Extended Nose Slip-On .750" Steel 1.8" (46mm) .90" (23mm) 1.4" (36mm) 1.9 oz. (54g) 6A37N14 $ 46.99

SADLAK INDUSTRIES AR-15/M16

GAS BLOCKS

Extended NoseLow Profile ClampLow Profile Slip-On

Sick of that front-sight gas block? Need a low-pro block to go under an extended railed handguard? SLR has your solution: Change it out and add more versatility to your AR-15 with the addition of the SLR Rifleworks Micro Gas Block. The SLR Rifle-works micro is made with a low-profile design that allows clearance for most aftermarket handguards offered for the AR-15 platform, giving owners a wide range of versatility and customization options for their rifle. Machined from 4140 billet steel with a tough QPQ Mel-onite finish OR super-lightweight Titanium in it natural silver finish. Available to fit barrels with .625", .750", .875" and .936" O.D. at gas journal. The SLR Micro also comes equipped with 0.400"-spaced setscrews to ensure your gas block never moves from its position.

SLR RIFLEWORKS AR-15/M16

MICRO GAS BLOCKVersatility in a Low-Profile Design

#100-025-355AV Steel Micro Gas Block, .625", 2Z00AYC � � $ 35.99#100-025-356AV Steel Micro Gas Block, .750", 2Z00QIJ� � 35.99#100-025-357AV Steel Micro Gas Block, .875", 2Z00JWB � � 39.99#100-025-358AV Steel Micro Gas Block, .936", 2Z00JKQ � � 39.99#100-025-359AV Titanium Micro Gas Block, .625",

2Z00GDE � � � � � � � � � � � � � � � � � � � � � � � � � � � 74.99#100-025-360AV Titanium Micro Gas Block, .750",

2Z00MIE � � � � � � � � � � � � � � � � � � � � � � � � � � � 74.99#100-025-361AV Titanium Micro Gas Block, .875",

2Z00GLE � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.99#100-025-362AV Titanium Micro Gas Block, .936",

2Z00AVM � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.99

GA

S SY

STE

MS

CO

MP

ON

EN

TS

Minimal-profile replacement for factory front sight/gas block won’t interfere with extended-length tactical forearms, while ensuring proper function of gas system for reliable cycling. Pro-trudes only .420" above barrel, covers less than 1" of barrel length, and adds only 1.4 oz. of weight. Compatible with M4-style carbines and M16A2/A3/A4-style rifles with any length, .750" O.D. barrel. Two steel setscrews keep the block securely anchored to the barrel to prevent shifting even under the force of full-auto recoil. Black oxide finish matches most factory barrel finishes. abSPECS: Carbon steel, oxide finish, matte black. .950" (24mm) long. 1.375" (3.5cm) overall height. 1.4 oz. (41g) weight. Fits AR-15/M16 with .750" O.D. barrel at gas block mounting position. Includes hex-head setscrews.

TROY INDUSTRIES AR-15/M16

LOW-PROFILE GAS BLOCKWon’t Interfere With Extended-Length

Tactical Forearms

#100-004-062AV Low-Profile Gas Block, 3B29E35 � � � � $ 30.99

SLR's adjustable gas blocks gives AR owners total control over their rifle's gas systems, giving them the chance to fine-tune the gun with differ-ent ammo or with an attached suppressor. The SLR Rifleworks Sentry Adjustable Clamp On Gas Block doesn't operate with any small screws or balls like other gas blocks, removing the chance these parts could fail or get lost. Machined from 4140 billet steel with a tough QPQ Melonite finish OR super-lightweight Ti-tanium in it natural silver finish. Available to fit barrels with .625", .750", .875" and .936" O.D. at gas journal. Choose traditional Setscrew attachment or adjustable Clamp On with an included tool and features a clamp-on attachment design that is guaranteed to provide a solid gas seal. ab

SLR RIFLEWORKS AR-15/M16

SENTRY ADJUSTABLE GAS BLOCKS

Give Your AR the Exact Amount of Gas It Needs

#100-025-363AV Steel Adj. Gas Block, .625"/Clamp On, 2Z119F99 � � � � � � � � � � � � � � � � � � � � � � � � � �$ 119.99

#100-025-364AV Steel Adj. Gas Block, .750"/Clamp On, 2Z119D99 � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-025-365AV Steel Adj. Gas Block, .875"/Clamp On, 2Z00BWD � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-025-366AV Steel Adj. Gas Block, .936"/Clamp On, 2Z00QQQ � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-025-367AV Steel Adj. Gas Block, .625"/Setscrew, 2Z00GBR � � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-025-368AV Steel Adj. Gas Block, .750"/Setscrew, 2Z119M99 � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-025-369AV Steel Adj. Gas Block, .875"/Setscrew, 2Z119Q99 � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-025-370AV Steel Adj. Gas Block, .936"/Setscrew, 2Z119J99 � � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-025-371AV Titanium Adj. Gas Block, .625"/Setscrew, 2Z00IRR � � � � � � � � � � � � � � � � � 179.00

#100-025-372AV Titanium Adj. Gas Block, .750"/Setscrew, 2Z179N00 � � � � � � � � � � � � � � � 179.00

#100-025-373AV Titanium Adj. Gas Block, .875"/Setscrew, 2Z184E99 � � � � � � � � � � � � � � � � 184.99

#100-025-374AV Titanium Adj. Gas Block, .936"/Setscrew, 2Z00EJA � � � � � � � � � � � � � � � � � 184.99

Setscrew Titanium,

SetscrewClamp On

Superlative's "Bleed Off" direct-impingement

gas block lets you adjust the gas flow by vent-ing (bleeding) excess gas out of the block in-stead of restricting its flow like conventional adjustable blocks. The pressure is reduced to just the amount required to reliably drive the bolt carrier. The remaining gas is bled out of

the block, so the system runs much cleaner and cooler. These blocks are extremely effective on SBRs, pistols, and suppressor-equipped ARs because the excess gas is exhausted out of the block instead of being blown back at the shooter. The adjustment screw and detent are on the outside of the block so they won't get contaminated by carbon buildup. The screw is removable, but there is a safety stop to prevent you from unintentionally backing it out too far. Stainless steel construction, with natural finish or black Melonite. Models to fit .625", .750", .875" and .936" gas journals. Solid models have two setscrews on the underside to anchor the block to the barrel. Clamp On models have a split underside and two side-mounted cap screws to provide friction-fit. ab

SUPERLATIVE ARMS AR-15/M16

ADJUSTABLE GAS BLOCKSDial Up The Amount

of Gas Flow You Need; Many Sizes, 2 Different Attachment Systems To

Choose From

#100-020-574AV AR-15 Adjustable Gas Block .750", Solid Stainless Steel, 5A85E70 � � � � � � � �$ 89.99

#100-020-572AV AR-15 Adjustable Gas Block .750", Clamp On Stainless Steel, 5A85B70 � � � 89.99

#100-020-571AV AR-15 Adjustable Gas Block .750", Clamp On Melonite, 5A85L70 � � � � � � � � 89.99

#100-020-573AV AR-15 Adjustable Gas Block .750", Solid Melonite, 5A85C70 � � � � � � � � � � � � � 89.99

#100-020-570AV AR-15 Adjustable Gas Block .625", Solid Stainless Steel, 5A85J70� � � � � � � � � 89.99

#100-020-568AV AR-15 Adjustable Gas Block .625", Clamp On Stainless Steel, 5A85L70 � � � � 89.99

#100-020-569AV AR-15 Adjustable Gas Block .625", Solid Melonite, 5A85A70 � � � � � � � � � � � � � 89.99

#100-020-567AV AR-15 Adjustable Gas Block .625", Clamp On Melonite, 5A85M70 � � � � � � � � 89.99

#100-020-578AV AR-15 Adjustable Gas Block .875", Solid Stainless Steel, 5A85D70 � � � � � � � � 89.99

#100-020-576AV AR-15 Adjustable Gas Block .875", Clamp On SS, 5A85G70 � � � � � � � � � � � � � � 89.99

#100-020-577AV AR-15 Adjustable Gas Block .875", Solid Melonite, 5A85L70 � � � � � � � � � � � � � 89.99

#100-020-575AV AR-15 Adjustable Gas Block .875", Clamp On Melonite, 5A85J70 � � � � � � � � 89.99

#100-020-582AV AR-15 Adjustable Gas Block .936", Solid Stainless Steel, 5A85P70 � � � � � � � � 89.99

#100-020-580AV AR-15 Adjustable Gas Block .936", Clamp On Stainless Steel, 5A85F70 � � � � 89.99

#100-020-581AV AR-15 Adjustable Gas Block .936", Solid Melonite, 5A85D70 � � � � � � � � � � � � � 89.99

#100-020-579AV AR-15 Adjustable Gas Block .936", Clamp On Melonite, 5A85P70 � � � � � � � � 89.99

Slim replacement for cumbersome USGI front sight/gas block tower features a low pro-

file for a more streamlined appearance and less chance of snag-ging on vegetation and other gear. Covers only 1" of barrel length and reduces weapon’s forward weight for improved handling and maneuverability. Clamp On models squeeze around the barrel with included socket head screws. Set Screw model uses the included set screws at the bottom of the unit to anchor the gas block to the barrel for the lowest-profile installation. abSPECS: 17-4 PH stainless steel, oxide finish, matte black. Includes hex-head mounting bolts or set screws, and gas tube pin. All models are 1" (2.54cm) long. Models available to fit barrels with .625" O.D. or .750" at gas block position. Clamp-on models will not fit under small diameter free-float

One-Piece Design Fits Under Free-Float Handguards

#100-003-996AV .750" Low-Profile Gas Block, Clamp-On, 3A63P08 � � � � � � � � � � � � � � � � � � � � � � $ 65.99

#100-011-110AV .625" Low-Profile Gas Block, Clamp-On, 3A63D08 � � � � � � � � � � � � � � � � � � � � � � 65.99

#100-011-111AV .750" Low-Profile Gas Block, Set Screw, 3A56E94 � � � � � � � � � � � � � � � � � � � 58.99

VLTOR AR-15/M16


tubes or those with an exposed bottom rail channel on the inside of the handguard such as VLTOR VIS, Daniel Defense, and LaRue Tactical. .750" Clamp On - .926" (2.35cm) wide, 1.388" (3.52cm) tall. .625" Clamp On - .920" (2.33cm) wide, 1.370" (3.48cm) tall. .750" Set Screw - .907" (2.30cm) wide, .1.352" (2.43cm) tall.

AR

-15/M

16


brownells.com

BA

RR

ELS

Multi-purpose front sight works as a fully functional gas block, plus delivers lifesaving backup when primary optics fail or become hindered by low light or poor weather conditions. Machined, steel body features a spring-loaded pushbutton that locks sight in the deployed position. When not in use, simply depress the button and fold down for an unobstructed view through your optics. Protective ears guard the sight post from blows incurred during duty. Split, barrel clamp design allows easy mounting to standard contour barrels without removal of flash hid-ers or muzzle brakes. Hex cap screws pull clamping halves tight to barrel for complete sight immobilization when properly tight-ened. Durable, mil-spec, phosphate finish resists rust and corrosion. YHM-9394 includes bayonet lug and pivoting sling swivel that ac-cepts tactical slings up to 11/4" wide. Rubber coating prevents swivel from rattling and giving away your position while on patrol. YHM-9394/9680 is a matched set that pairs up the YHM-9394 front sight with the popular windage-adjustable, dual-aperture YHM-9680 flip-up rear sight. YHM-9395 has sling swivel, no bayonet lug. YHM-9835A has Picatinny-style under-rail that accepts lights, lasers, and other forward-mounted accessories. No sling swivel. abSPECS: Steel, phosphate-coated finish, dark gray. 17/8" (4.8cm) long, 13/16" (3cm) wide. Sight Post – 21/4" (5.7cm) high when raised. Fits standard, .750" diameter barrels. YHM-9394 – 6 oz. (170g) weight. YHM-9680 - Rear Sight in YHM-9394/9680 set - 1" (2.5cm) long, 11/2" (3.8cm) wide, 19/16" (4cm) high when raised. 2.5 oz. (71g) wt. YHM-9395 - 5.5 oz. (156g) weight. YHM-9835A – 7.7 oz. (219 g) weight.


CLAMP-ON FRONT SIGHT GAS BLOCK

Immediate Response Sighting For Tactical Emergencies

YHM-9394

#100-002-237AV YHM 9394 Front Sight w/Bayonet Lug & Sling Swivel, 9A76D23 � � � � � � � � � � � � $ 81.99

#100-007-622AV YHM-9394/9680 Front/Rear Sight Set, 9A136G92 � � � � � � � � � � � � � � � � � � � � � 170.99

#100-002-077AV YHM 9395 Front Sight w/Sling Swivel Only, 9A82D70 � � � � � � � � � � � � � � � � � � � � 88.99

#100-003-174AV YHM 9835A Front Sight w/Bottom Rail, 9A106L98 � � � � � � � � � � � � � � � � � � � � 114.99

YHM-9395

YHM-9395

YHM-9394/9680

Superlative's "Bleed Off" gas piston system extends combines the benefits of their adjustable-flow gas blocks with a gas piston operating system. The result is a superbly reliable, cool-running, smooth-cycling AR-15 rifle (or pistol). Complete kit replaces your rifle's bolt carrier (retain your existing bolt), gas tube, and gas block. Up front, just as with Superlative's gas blocks, the gas flow is con-trolled by bleeding excess gas out of the block instead of restricting its flow. The pressure used in the block is just enough to drive the piston to operate the bolt carrier. The remaining gas is vented out of the block, so your rifle runs much cleaner and cooler, with a noticeable reduction in felt recoil. The control screw and detent are located outside of the block, eliminating the risk of seizing or wear due to carbon build up. Solid - two setscrews on the underside of the piston block to anchor the block to the barrel. Clamp On - split underside on piston block with two side-mounted cap screws to tighten for friction fit. abSPECS: Stainless steel, with black Melonite finish. Models to fit .625" and .750" gas journals. Includes piston block assembly, carrier (bolt not in-cluded), necessary mounting hardware, and instructions.

SUPERLATIVE ARMS AR-15/M16

ADJUSTABLE GAS PISTON SYSTEM

Piston Operating System + Gas Flow You Control = Ultra-Reliable Rifle

#100-020-584AV Carbine Piston System .750", Solid, 5A248J55 � � � � � � � � � � � � � � � � � � � � � � � � $ 260.99

#100-020-588AV Carbine Piston System .750", Clamp-On, 5A248H55 � � � � � � � � � � � � � 260.99

#100-020-585AV Mid-Length Piston System .750", Solid, 5A248C55 � � � � � � � � � � � � � � � � � � 260.99

#100-020-589AV Mid-Length Piston System .750", Clamp On, 5A248C55 � � � � � � � � � � � � � 260.99

#100-020-593AV Mid-Length Piston System .625", Solid, 5A248G55 � � � � � � � � � � � � � � � � � � 260.99

#100-020-597AV Mid-Length Adj Piston System .625", Clamp On, 5A248D55 � � � � � � � � � � � � � 260.99

#100-020-586AV Rifle Piston System .750", Solid, 5A248G55 � � � � � � � � � � � � � � � � � � � � � � � � 260.99

#100-020-590AV Rifle Piston System .750", Clamp, 5A248A55 � � � � � � � � � � � � � � � � � � � � � � � � 260.99

#100-020-583AV Pistol Piston System .750", Solid, 5A248I55 � � � � � � � � � � � � � � � � � � � � � � � � � 260.99

#100-020-587AV Pistol Piston System .750", Clamp On, 5A248G55 � � � � � � � � � � � � � � � � � � � � 260.99

Drop-in gas piston conversion kit installs in only five minutes and im-proves the reliability and function of your AR-15 by

eliminating fouling caused by gas venting into receiver. Rifle runs cooler, with less frequent need for cleaning and less wear on carrier and bolt – resulting in longer service life from these critical parts. The unique, kidney-shaped cross-section of the piston and piston chamber provides extra mass and surface area to evenly spread out gas pressure and reduce felt recoil, allowing you to stay on target for rapid follow-up shots. Installs in minutes on both semi- or full-auto/ #100-005-291AV Carbine Gas Piston Kit, 7D288N97 � � $ 299.99

For Smoother, Cooler Operation, Reduced

Recoil, & Less Frequent Cleaning

OSPREY DEFENSE AR-15/M16 OPS-416 GAS PISTON CONVERSION KIT

burst rifles with a barrel O.D. of .875" or less. No need to remove gas block/sight tower, and no permanent alterations to barrel or upper receiver – reinstall original parts at any time. Replacement bolt car-rier with integral lug is machined from a single piece of steel for a lifetime of use. Fits Carbine-length gas systems. abSPECS: Steel, black oxide finish. Handguard – Reinforced polymer com-posite, black. Kit includes preassembled piston assembly, bolt carrier, handguard, and instructions. Fits 111/2" to 16" barrels with .875" O.D. or smaller, and carbine-length gas system.

GA

S SYST

EM

CO

MP

ON

EN

TS

Made for Brownells by Satern, this car-bine-length barrel sets you up to convert a standard AR-15 to the hard-hitting, big bore .458 SOCOM round. Machined from 416R ordnance-grade stainless steel, with a bore that features 5R rifling and a 1-14" twist, for excellent bullet stabilization. Overall length is 16" without the included stainless steel Heliport muzzle brake in-stalled (¾"-24 tpi threads). Six helical rows of ports on the Heliport redirect some of the combustion gas to counteract muzzle rise, helping you keep the sights on the target. Also included: .458 bolt with the correct .478" bolt face for .458 SOCOM. Requires a carbine-length gas tube and .936" gas block (not included). Opposite side of gas port features dimples, so that gas block setscrews can be secured in place, preventing movement of the block. ab

AR-15

.458 SOCOM BARREL/BOLT/BRAKE

Carbine-Length Barrel for a Hard-Hitting .458 Rifle

#812-000-009AV 16" 458 Socom Barrel w/ Muzzle Brake And Bolt, 2A390D99 � � � � � � � � $ 415.99

Ready to install replacement barrel converts an AR-15 upper to the powerful 12.7x42mm big bore cartridge. Gas port is drilled for mid-length gas system with dimple opposite of port to help achieve proper gas block alignment. Correct 1-20" rifling to stabilize a vari-ety of big 12.7mm/50 cal. bullets. Comes with 12.7x42mm bolt that fits into a standard bolt carrier. .223/5.56 AR-15 uppers will require enlargement of ejection port for best reliability. abSPECS: 416R stainless steel. 16" (40.6cm) long. ¾"-24 tpi muzzle threads. .936" (2.3cm) O.D. at gas port.

AR-15

12.7x42MM BARREL & BOLT

Easily Converts Standard AR To Hard-Hitting Big Bore Cartridge

#080-001-124AV 12.7x42mm AR-15 Barrel, 1H310M99 � � � � � � � � � � � � � � � � � � � � � � � � $ 329.99

Unique, all-steel gas blocks expand the versatility of your rifle by providing a variety of accessory rail and handguard mounting options. Especially helpful in customizing short-barreled tactical rifles. Machined from bar stock for extra strength and rigidity, then mil-spec Parkerized for exceptional wear- and corrosion-resistance. Unless otherwise noted, fits barrel with .750" at gas journal.

One-piece YHM-9383 Low Profile block is designed to fit inside most free-float handguards, allowing use of rifle-length hand-guards on carbine length barrels for a clean, streamlined look. .950" (2.4cm) long, 11/3" (3.3cm) high. 1.4 oz. (40g) wt.

YHM-9384 Low Profile Slotted has a slot cut into the bottom for easy mounting and dismounting; slide the block into position and tighten the two pinch screws to snug it securely to the barrel. .950" (2.4cm) long, 13/8" (3.7cm) high. 1.8 oz (51g) wt.

Single Rail has four Picatinny slots on top and clamps to any bar-rel with .750" O.D. at the gas journal via two robust setscrews. 17/8" (4.8cm) long, 1" (2.5cm) wide, 15/8" (4.1cm) overall height, 9/16" (1.5cm) rail height. 4.4 oz. (124g) wt.

Two-Rail block is an easy-to-install, two-piece unit that clamps around the barrel using four hex screws; includes machined top and bottom Picatinny rails only. 13/4" long, 11/4" wide, 13/4" high. 5.4 oz. (153 g) wt. ab


GAS BLOCKS

Picatinny Railed & Low-Profile Options To Fit Your Application

#100-010-655AV YHM-9383 Low Profile Gas Block, 9A15F59 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 19.99

#100-010-657AV YHM-9384 Low-Profile Slotted Gas Block, 9A23C02 � � � � � � � � � � � � � � � � � � � 27.99

#100-009-089AV Single-Rail Gas Block for .750" Barrel, 9A50M67 � � � � � � � � � � � � � � � � � � � � � � � � � � 60.99

#100-002-076AV 2-Rail Gas Block, 9A67A46 � � � � � � � � � � 76.99

Low Profile 2Single-Rail .750" Low Profile Slotted

Two-Rail

LOOKING FOR A GREAT DEAL?

Go online and click on our SALE & CLEARANCE TAB!!

AR

-15

/M16


SINCE 1939

BA

RR

ELS

Available only from Brownells, these barrels have a unique, con-tinuous-taper contour that cuts weight while delivering optimum rigidity and balance. The sharp shoulder at the handguard cap has been eliminated for improved barrel harmonics and, consequently, better accuracy potential. M4-type feed ramps in the extension en-courage reliable chambering and extraction of rounds. 1-7" twist handles heavier long-range bullets. Mid-length gas system slows gas velocity to promote smoother, more reliable operation than with the standard carbine-length system. Comes with a low-profile steel gas block (.625") and a stainless steel gas tube (mid-length). abSPECS: 11595E certified mil-spec steel, manganese phosphate finish, matte black. Chambered in 5.56 NATO. Chrome-lined bore. ½" x 28 muzzle threads. .622" (1.6cm) O.D. at gas port.

BRAVO COMPANY AR-15

ENHANCED LIGHTWEIGHT BARREL ASSEMBLY KITS

#100-019-397AV 14.5" Enhanced Lightweight Barrel Assembly, 1E342K99 � � � � � � � � � � � � � � $ 342.99

#100-019-398AV 16" Enhanced Lightweight Barrel Assembly, 1E342K99 � � � � � � � � � � � � � � 342.99

Weight-Saving Contour Improves Balance & Harmonics

These barrels have a match-grade 416R stain-less steel inner core sleeved in roll-wrapped car-bon fiber that provides superb rigidity, weight savings, and excellent cooling. Three times stronger than steel, the carbon fiber sleeve puts an air pocket between the barrel and carbon, allowing air to flow around the stainless steel inner barrel, further enhancing cooling. Vent holes in the carbon fiber sleeve lets that internal heat escape, expediting barrel cooling even more. In the end, BSF AR-15 Barrels stay cool enough you can hold them with your bare hands, even after running 60 consecutive rounds down them! Match grade in-ner barrel of double stress-relieved 416R stainless steel. .936" O.D. bull barrel external contour. 95% of the carbon fiber wrap does not touch the inner barrel for plenty of heat dissipation. By using this sleeve system, BSF barrels are able to maintain remarkable stiffness and strength while keeping the barrel extremely lightweight. Rifling twist rates: .223 Wylde/6.5 Grendel/6.5 Creedmoor = 1-8"; .308 Win = 1-10". ML = mid-length gas tube; RL = rifle length gas tube; RL+2 = extended rifle-length tube (included with barrel). ab

BLACKSTONE FIREARMS AR-15

CARBON FIBER BARRELS

Lightweight Barrel With Rigidity & Stability of a Heavy Bull Barrel

#100-025-236AV .223 Wylde CF Barrel, 16"/RL, 2H525A00 � � � � � � � � � � � � � � � � � � � � � � � � �$ 569.99

#100-025-237AV .223 Wylde CF Barrel, 18"/RL, 2H525B00 � � � � � � � � � � � � � � � � � � � � � � � � � 569.99

#100-025-238AV .223 Wylde CF Barrel, 20"/RL, 2H525N00 � � � � � � � � � � � � � � � � � � � � � � � � � 569.99

#100-025-234AV 6.5 Grendel CF Barrel, 18"/RL, 2H498B00 � � � � � � � � � � � � � � � � � � � � � � � � � 569.99

#100-025-235AV 6.5 Grendel CF Barrel, 20"/RL, 2H498G00 � � � � � � � � � � � � � � � � � � � � � � � � 569.99

#100-026-798AV 6.5 Creedmoor CF Barrel, 20"/RL, 2H544B18 � � � � � � � � � � � � � � � � � � � � � � � � � 597.55

#100-026-799AV 6.5 Creedmoor CF Barrel, 22"/RL+2, 2H544B18 � � � � � � � � � � � � � � � � � � � � � � � � � 597.55

#100-026-800AV 6.5 Creedmoor CF Barrel, 24"/RL+2, 2H544G18 � � � � � � � � � � � � � � � � � � � � � � � � � 597.55

#100-026-801AV .308 Win CF Barrel, 16.5"/ML, 2H510G46 � � � � � � � � � � � � � � � � � � � � � � � � � 569.05

#100-026-803AV .308 Win CF Bbl, 18"/RL, 2H510A46 � � 569.05#100-026-804AV .308 Win CF Bbl, 20"/RL, 2H544Q18 � � 597.55#100-026-806AV .308 Win CF Bbl, 24"/RL, 2H544K18 � � 597.55

These top-grade medium-contour barrels come in many cali-bers and gas system lengths to help you custom build your ideal rifle. Some 5.56 and 308 barrels available in lightweight contour.

AR-15/M16 BARRELS

Premium-Quality Barrels in a Variety of Calibers for Custom Builds

STOCK # CALIBER LENGTH GAS SYSTEM CONTOUR FINISH TWIST PRICE#080-001-011AV 5.56 14.5" Carbine Medium Nitride 1-7" 1H257B99 $ 269.99#080-001-017AV .223 Wylde 20" Rifle Medium Stainless 1-8" 1H237K39 $ 249.99#080-001-026AV 6.5mm Grendel 18" Mid-Length Medium Stainless 1-8" 1H299M99 $ 325.99#080-001-353AV 6.5mm Grendel 20" Mid-Length Medium Nitride 1-8" 1D284G99 $ 299.99#080-001-119AV 6.5mm Grendel 24" Rifle Medium Stainless 1-8" 1H299F99 $ 325.99#080-001-354AV 6.5mm Grendel 24" Mid-Length Medium Stainless 1-8" 1D307E99 $ 329.99#080-001-009AV .300 AAC BLK 16" Carbine Medium Nitride 1-8" 1H257H99 $ 269.99#080-001-023AV .308 20" Rifle Medium Nitride 1-10" 1H360C19 $ 379.99#080-001-025AV .308 24" Rifle Medium/Lightweight Stainless 1-10" 1H337B99 $ 349.99#080-001-167AV .450 Bushmaster 16" Mid-Length Heavy Stainless 1-20" 1H310H99 $ 329.99

Precision button rifling helps maximize accuracy potential with twist rates optimized for specific calibers. Available in black nitride finish for superior hardness, lubricity and easy of cleaning, or in bare stain-less for extra resistance to corrosion and weather. .223 Wylde barrel features 5R radiused rifling. 6.5 Grendel barrels include matching bolt. 308 barrels fit DPMS pattern receivers. abSPECS: 416R stainless steel, natural finish, or 4150 chome moly steel with black Nitride finish. Includes installed barrel extension; gas block must be purchased separately. .223/5.56 have ½"-28 tpi muzzle threads. .450 Bushmaster has ¾"-24 tpi muzzle threads and is .936" O.D. at gas block shoulder. All other models have 5/8"-24 tpi muzzle threads. CMMG's medium profile, carbine-style, multi-role barrels are

versatile enough to be an integral part of almost any custom build. Chambered in 5.56mm NATO, they come in lengths to suit pistol, SBR, carbine, or full rifle builds. Barrel extension is pre-installed and headspaced, with M4-type feed ramp cuts. Available in 416 stainless steel or 4140 chrome moly steel with a hard, black nitride finish. All come with gas port drilled, ready for the gas block of your choice. 12.5" has gas port drilled for carbine-length gas tube; 16" requires mid-length gas tube; 18" requires rifle-length gas system. abSPECS: 4140 chrome moly steel (CM) with matte black salt bath nitride finish, or 416 stainless steel (SS), natural silver finish. .750" O.D. at gas port. 1/2"-28 tpi muzzle threads. 1-7" rifling. All NFA rules apply.

CMMG AR-15/M16 5.56 BARRELS

Provides Excellent Balance Between Strength, Rigidity & Weight Savings

#100-014-832AV 12.5" CM Barrel, 3B160B20 � � � � � � � � $ 183.99#100-014-829AV 16" CM Steel Barrel, 3B168P97 � � � � � 175.99#100-014-830AV 16" SS Barrel, 3B00BEH � � � � � � � � � � � � 162.99#100-014-831AV 18" SS Barrel, 3B187P82 � � � � � � � � � � � 193.99

Direct replacement for the standard .223/5.56mm barrel converts your AR-15 to the high-performance 300 AAC Blackout (300BLK) cartridge. The 300 AAC lets you upgrade your rifle to 7.62 x 39 ballistics, while retaining the standard AR-15/M16 bolt, carrier, and magazine at its full capacity, with no additional modifications� 1-8" rifling accepts bullet weights from 110 gr to 220 gr, and 5/8"-24 muzzle threads accept popular AR-308 flash suppressors and muzzle brakes. Finished with CMMG’s “WASP” nitriding process that delivers outstanding resistance to surface wear and corrosion. abSPECS: Hardened 4150 chrome-moly steel, WASP nitride finish, matte black. 5/8"-24 tpi muzzle threads. .750" O.D. at gas port. 16" Carbine bar-rel accepts carbine-length gas systems. 12.5"/8.2" barrels accept pistol-length gas systems.

CMMG AR-15/M16

300 AAC BLACKOUT BARRELS

Converts Your AR To A Hard-Hitting .30 Caliber - NO Other

Modifications Required

#100-009-125AV 300 AAC Barrel, 16", 3B172C11 � � � � � $ 183.99#100-014-823AV 300 AAC Barrel, 12.5", 3B140H34 � � � 163.99#100-014-824AV 300 AAC Barrel, 8.2", 3B142F16 � � � � � 167.99

CMMG's 9mm-chambered carbine-length (16.1") AR-15 barrel delivers the same quality, features, and performance as their rifle-caliber AR barrels. Made from high-grade chrome moly steel, with a salt bath nitride finish inside and outside for extra surface hardness and corrosion resistance. 1-10" rifling is optimal for stabilizing 9mm pistol bullets. M4 profile with .750" O.D. area at traditional gas port location for installing an A2 sight tower. No gas port because 9mm ARs are blow-back operated. abSPECS: 4140 chrome moly steel, nitride finish, matte black. 1-10" twist. 1/2"-36 muzzle threads.

The Foundation Of A Versatile, Pistol-Caliber

Conversion

#100-014-826AV AR-15 16" 9mm Barrel, 3B178H88 � � $ 184.99

CMMG AR-15/M16 9MM BARREL

Genuine Colt barrels feature a chrome-lined bore for corrosion resistance and extended service life. Button-rifled and magnetic particle inspected (MPI) to ensure no hidden flaws in the metal. Sold as complete assemblies with barrel extension, front sight tower, handguard cap, and barrel nut. All except 9mm are chambered for 5.56 NATO and have 1/2"-28 tpi muzzle threads and gas port drilled for carbine-length gas system. Unless otherwise indicated, .750" OD at gas port. M4 16" barrel includes an A2 flash suppressor, sling swivel, bayonet lug, and Delta ring kit. M4 14.5" has bayonet lug, A2 front sight post, and M4 feed ramps. M4 14.5" SOCOM heavy contour barrel has carbine-length gas system and M4 feed ramps. Lightweight has a slimmer profile than the M4 carbine barrel and has .625" O.D. at gas port. 9mm 16" lightweight contour barrel in-cludes A2 flash suppressor and bayonet lug. .625" O.D. at gas port with 1/2"-36 tpi muzzle threads. abSPECS: 4150 chrome-moly steel, nitride bath finish. All NFA rules apply.

Factory Barrels With All The Small Parts Are Ready For Your Next Build

M4

#160-000-396AV 14.5" M4 Barrel, 1-7", 6A286C86 � � � � $ 299.99#160-000-399AV 14.5" M4 SOCOM Barrel, 1-7",

6A286N86 � � � � � � � � � � � � � � � � � � � � � � � � 313.99#160-000-402AV 16" M4 Barrel, 1-7", 6A245J74 � � � � � � 283.99#160-000-403AV 16" Lightweight Barrel, 1-7",

6A257I22 � � � � � � � � � � � � � � � � � � � � � � � � � 285.99#160-000-401AV 16" 9mm Lightweight Barrel, 1-10",

6A166L57 � � � � � � � � � � � � � � � � � � � � � � � � � 197.99

SOCOM

LIGHTWEIGHT

COLT AR-15/M16 COMPLETE CARBINE BARREL ASSEMBLIES

Ready-to-install barrels let you customize your AR-15/M16/M4/CAR-15 or replace a “shot-out” factory barrel with one that pre-serves your gun’s original specs and appearance. Machined from 4140 steel, with a dark gray, military-type Parkerized finish. Button-cut, six groove rifling with 1:9 right-hand twist provides superb ac-curacy with most bullet weights. Barrel extension has M4-type feed ramps to help ensure smooth feeding and prevent jams. Barrel nut and handguard retainer cap included. Forged front sight housing has integral bayonet lug, and muzzle is threaded to accept the flash hider or compensator of your choice. Choose from Chrome Lined for maximum bore life or Standard (unlined) for an extra edge in ac-curacy. A1 has the correct dimensions and contours of the original M16A1 barrel in shorter, more compact 16" and 11½" lengths. Offers a substantial weight reduction (10½ oz. in 16" configuration) for car-rying ease and faster deployment in combat, with accuracy equal to the heavier HBAR barrel out to 100 meters. Front sight housing is purpose-manufactured to fit the .625" forward barrel, not a modi-fied .750" housing, to maintain correct appearance. All NFA rules apply to 11½" barrels. abSPECS: 4140 steel, dark gray Parkerized finish. A1 - .675" (1.71cm) OD un-der handguard, .625" (1.59cm) at front sight housing, ½"-28 tpi threaded muzzle with .600" (1.52cm) dia. shoulder behind threads. HBAR - .870" ( 2.21cm) OD under handguard, .750" (1.91cm) at front sight housing, .730" (1.85cm) at muzzle.

DOUBLE STAR CARBINE BARRELS

A1 and HBAR Factory Contours; Two Lengths To Choose From

16" and 11-1/2" A1 barrels

shown

#100-002-667AV Chrome Lined 16" A1 Barrel, 2Z257P50 � � � � � � � � � � � � � � � � � � � � � � � � $ 284.99

#100-002-668AV Chrome Lined 16" HBAR Barrel, 2Z257A14 � � � � � � � � � � � � � � � � � � � � � � � � � 284.99

#100-002-669AV Chrome Lined 111/2" A1 Barrel, 2Z254H29 � � � � � � � � � � � � � � � � � � � � � � � � 279.99

#100-002-670AV Chrome Lined 111/2" HBAR Barrel, 2Z254F29 � � � � � � � � � � � � � � � � � � � � � � � � 279.99


brownells.com

AR

-15/M

16B

AR

RE

LS

STOCK # CALIBER LENGTH GAS SYSTEM CONTOURTHREAD

SIZE MATERIAL TWISTO.D. GAS

PORT PRICE 100-030-231AV 223 Wylde 10.5" Carbine/.750" O.D. Hybrid 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D269P99 $ 269.99#100-010-179AV 223 Wylde 16" Carbine/.750" O.D. Hybrid 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D256H80 $ 269.99#100-010-180AV 223 Wylde 16" Mid-Length/.750"

O.D.Hybrid 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D256E80 $ 269.99

100-030-107AV 223 Wylde 16" Mid-Length/.750" O.D.

Hybrid 1/2"-28 tpi SS/SBN Black 1-8" .750" 5D00PIP $ 296.99

#100-015-341AV 223 Wylde 16" Carbine/.750" O.D. Lightweight 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D257G99 $ 269.99#100-010-181AV 223 Wylde 18" Rifle/.750" O.D. Hybrid 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D284K99 $ 296.99 100-030-108AV 223 Wylde 18" Rifle/.750" O.D. Hybrid 1/2"-28 tpi SS/SBN Black 1-8" .750" 5D296P99 $ 296.99#100-010-411AV 223 Wylde 18" Rifle/.750" O.D. HBAR 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D256A80 $ 269.99#100-019-284AV 223 Wylde 18" Rifle/.936" O.D. Fluted 1/2"-28 tpi SS/Silver 1-8" .750" 5D339P99 $ 339.99#100-010-531AV 223 Wylde 20" Rifle/.750" O.D. Hybrid 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D256I80 $ 269.99 100-030-109AV 223 Wylde 20" Rifle/.750" O.D. Hybrid 1/2"-28 tpi SS/SBN Black 1-8" .750" 5D00NDF $ 296.99#100-010-532AV 223 Wylde 20" Rifle/.750" O.D. HBAR 1/2"-28 tpi CS/Parkerized 1-8" .750" 5D284J99 $ 296.99 100-030-110AV 223 Wylde 20" Rifle/.750" O.D. HBAR 1/2"-28 tpi SS/SBN Black 1-8" .750" 5D00BWQ $ 296.99#100-019-285AV 223 Wylde 20" Rifle/.936" O.D. Fluted 1/2"-28 tpi SS/Silver 1-8" .936" 5D339L99 $ 339.99#100-019-283AV 223 Wylde 20" Rifle/.936" O.D. Bull w/Target

CrownNONE SS/Silver 1-8" .936" 5D284H82 $ 299.95

100-030-105AV 6.5 Grendel 18" Mid-Length/.750" O.D.

Hybrid 5/8"-24 tpi SS/Silver 1-8" .750" 5D299A99 $ 299.99

100-030-106AV 6.5 Grendel 22" Rifle/.750" O.D. HBAR 5/8"-24 tpi SS/Silver 1-8" .750" 5D299L99 $ 299.99

#100-019-351AV 6.5 Creedmoor 18" Rifle/.750" O.D. Hybrid 5/8"-24 tpi SS/Silver 1-8" .750" 5D301F74 $ 301.74#100-019-352AV 6.5 Creedmoor 22" Rifle/.875" O.D. Hybrid 5/8"-24 tpi SS/Silver 1-8" .875" 5D00NVH $ 301.74 100-030-103AV 6.5 Creedmoor 22" Rifle/.875" O.D. Hybrid 5/8"-24 tpi SS/SBN Black 1-8" .875" 5D305D99 $ 305.99#100-016-753AV 308 Win/7.62x51 NATO 16" Mid-Length/.750"

O.D.Hybrid 5/8"-24 tpi CS/Parkerized 1-10" .750" 5D305H99 $ 305.99

100-030-097AV 308 Win/7.62x51 NATO 16" Mid-Length/.750" O.D.

Hybrid 5/8"-24 tpi SS/SBN Black 1-10" .750" 5D00QDS $ 305.99

100-030-098AV 308 Win/7.62x51 NATO 16" Rifle/.750" O.D. Hybrid 5/8"-24 tpi SS/SBN Black 1-10" .750" 5D305A99 $ 305.99#100-016-754AV 308 Win/7.62x51 NATO 18" Mid-Length/.750"

O.D.Hybrid 5/8"-24 tpi CS/Parkerized 1-10" .750" 5D305M99 $ 305.99

100-030-099AV 308 Win/7.62x51 NATO 18" Mid-Length/.750" O.D.

Hybrid 5/8"-24 tpi SS/SBN Black 1-10" .750" 5D00FRJ $ 305.99

100-030-100AV 308 Win/7.62x51 NATO 18" Rifle/.750" O.D. Hybrid 5/8"-24 tpi SS/SBN Black 1-10" .750" 5D305I99 $ 305.99#100-016-755AV 308 Win/7.62x51 NATO 20" Rifle/.750" O.D. Hybrid 5/8"-24 tpi CS/Parkerized 1-10" .750" 5D00QDB $ 305.99#100-016-756AV 308 Win/7.62x51 NATO 20" Rifle/.750" O.D. Hybrid 5/8"-24 tpi SS/Silver 1-10" .750" 5D288K99 $ 288.99 100-030-101AV 308 Win/7.62x51 NATO 20" Rifle/.750" O.D. Hybrid 5/8"-24 tpi SS/SBN Black 1-11" .750" 5D305A99 $ 305.99#100-016-757AV 308 Win/7.62x51 NATO 22" Rifle/.875" O.D. Hybrid 5/8"-24 tpi SS/Silver 1-10" .875" 5D288A99 $ 288.99 100-030-102AV 308 Win/7.62x51 NATO 22" Rifle/.875" O.D. Hybrid 5/8"-24 tpi SS/SBN Black 1-11" .875" 5D305G99 $ 305.99

Button-rifled barrels feature precision-cut chambers and rifling for enhanced accuracy potential with a variety of ammunition. Gas ports are carefully optimized for barrel length and chambering to help ensure reliable cycling, and are available for carbine, mid-length and rifle gas systems. Many models feature muzzle threads for standard comps and flash hiders, plus M4 feed ramps on barrel extension to aid in smooth, reliable feeding. Models available in stainless steel (SS) or traditional carbon steel (CS). Chambers are finished, but headspace should be checked prior to installation. Hand-lapping helps ensure smooth, consistent lands and grooves, and Criterion uses a unique chrome-lining process on the CS barrels to maintains uniformity throughout the bore.

ALL barrels come with barrel extension installed. Hybrid contour barrels have a reduced and tapered contour under the handguard to save weight. HBAR contour barrels feature .870" diameter under handguard for rigidity and extra heat absorption. Ultralight barrels omit excess metal from places it's not needed to give a significant weight reduction for better maneuverability without sacrificing accuracy po-tential. Bull barrels have extra metal for more rigidity and an 11° target crown. Fluted models allow a longer barrel length for extra velocity without adding more weight. Eight flutes machined around the circumference of the barrel to the front and rear of the gas port, each flute neatly polished to smooth jagged edges yet retain a smart appearance.

223 Wylde barrels have 1-8" twist to give excellent performance with a wide variety of bullet weight and a chamber built to handle both .223 and 5.56 NATO ammunition. 308 Win/6.5 Creedmoor barrels are compatible with DPMS, Remington, Bushmaster and Fulton Armory pattern AR-308 rifles. .308 barrels have an M118 LR match chamber that accepts both .308 Winchester and 7.62x51mm NATO, and an M4-style barrel extension with feed ramps. Gauged at the factory with Fulton Armory .308 bolts; compatible with DPMS and JP Enterprises bolts. abSPECS: 4150 chrome-moly carbon steel with matte black Parkerized finish (CS/Blk) and chrome-lined bore OR 416R stainless steel with natural silver finish (SS/Silver) or Salt Bath Nitrided black finish (SS/SBN Black). Barrel O.D. at gas journal is listed in "Gas System" column below. ALL barrels come with barrel extension installed.

CRITERION AR-15/M16/AR-STYLE .308

MATCH GRADE BARRELSMade From Top-Grade Ordnance Steel - Engineered For

Versatility & Superb Accuracy Various Lengths & Popular Chamberings

20" Rifle Hybrid

20" Rifle HBAR

18" Rifle Hybrid

16" Mid-Length Hybrid

These barrels are cold hammer-forged from high-grade chromium-molybdenum-vanadium alloy steel for exceptional strength and accuracy potential—like a high-end match rifle barrel. Magnetic particle inspection (MPI) ensures there are no internal flaws in the metal. Durable manganese phosphate finish give excellent resistance to surface wear. Available drilled for either Carbine or Mid-Length gas tube (indicated in table below). Lightweight barrel offers a slimmer profile than the M4 Carbine barrel. Government barrel is slim under the handguard, with standard .750" O.D. at the gas block. S2W® “Strength 2 Weight” barrel has extra length and starts with a heavy profile at receiver, tapering to .750" at gas block. All bores are chrome lined, except for 300 AAC Blackout (330 BLK). Barrel extension has M4-type feed ramps. Choose caliber, profile, and length to fit your needs. abSPECS: 4150 chome-moly-vanadium steel, manganese phosphate finish, matte black. All models have 1/2"-28 tpi muzzle threads, except for 300 AAC Blackout (300 BLK), which has 5/8"-24 tpi threads. All NFA rules apply.

DANIEL DEFENSE AR-15/M16 HAMMER FORGED BARRELSCold Hammer Forged For Superb Accuracy; Chrome-Lined For Long Life

STOCK # CALIBER LENGTH PROFILE TWIST RATE O.D. GAS PORT PRICE#100-009-472AV 5.56 16" Lightweight Carbine 1-7" .625" 8K275C00 $ 275.00#100-009-475AV 5.56 16" Government Mid-Length 1-7" .750" 8K275N00 $ 275.00#100-009-473AV 5.56 16" Lightweight Mid-Length 1-7" .625" 8K275E00 $ 275.00#100-009-474AV 5.56 14.5" M4 Carbine 1-7" .750" 8K270L52 $ 289.99#100-009-476AV 5.56 10.3" Government Carbine 1-7" .750" 8K275C00 $ 275.00#100-014-986AV 5.56 11.5" Government Carbine 1-7" .750" 8K277M14 $ 289.99#100-014-987AV 5.56 12.5" Government Carbine 1-7" .750" 8K275A00 $ 275.00#100-014-989AV 6.8 SPC 18" S2W Mid-length 1-11" .750" 8K332M00 $ 332.00#100-014-988AV 300 BLK 10.3" S2W Carbine 1-8" .750" 8K275K00 $ 275.00#100-010-893AV 300 BLK 16" S2W Carbine Length* 1-8" .750" 8K275F00 $ 275.00

M4 Carbine

Lightweight

Government Mid-Length

Government Carbine 10"

18" Strength 2 Weight

Stainless steel target barrel is specifically chambered for the ci-vilian .223 Remington cartridge and features 1-9" rifling that is ideal for light to medium weight projectiles. Exterior is fluted for extra rigidity and the additional surface area enhances cooling. Non-threaded muzzle, with recessed crown to help protect end of bore from damage. Comes with factory-installed barrel extension and locator pin. Indents for gas block set screws have been pre-drilled. M4-type feed ramps aid in smooth feeding. abSPECS: 416 stainless steel (SS), natural finish. .936" (2.38cm) O.D. at gas port. 1-9" rifling. Chambered .223 Remington. Not for use with 5.56 NA-TO. Carbine-length gas system on 16" model and rifle-length gas system on 20" and 24". Fits mil-spec AR-15/M16 upper receivers.

DPMS AR-15

STAINLESS STEEL .223 BARREL

Fluted Exterior For Rigidity & Enhanced Cooling

#231-000-342AV 16" Fluted SS AR-15 Barrel, 3B167L68 � � � � � � � � � � � � � � � � � � � � � � � � � $ 178.99

#231-000-376AV 24" Fluted SS AR-15 Barrel, 1C214L17 � � � � � � � � � � � � � � � � � � � � � � � � � 236.99

Heavy, HBAR-profile, pistol-length barrel comes with extension installed and gas port drilled for custom AR pistol builds. Precision-machined from 4140 chrome-moly steel with a 1-9" twist that sta-bilizes standard 5.56/.223 bullet weights. Requires a pistol-length gas tube, available separately. abSPECS: 4140 chrome moly steel, phosphate finish, matte black. 71/2" OAL. .750" O.D. at gas block. Chambered for 5.56mm NATO. 1/2"-28 tpi muzzle threads. Pistol-length gas tube required for installation.

DOUBLE STAR AR-15 PISTOL BARRELShort 71/2" Barrel For

Custom AR Pistol Builds

#100-008-186AV AR Pistol Barrel, 2Z150D40 � � � � � � � � $ 169.99

The SASS barrel is designed help you squeeze maximum perfor-mance from the 5.56 NATO cartridge for precise accuracy at longer ranges. Features a heavy contour for rigidity with flutes machined under the handguard area and near the muzzle to help dissipate heat and reduce weight. 1-8" rifling twist rate works well with most bullets, especially the heavier weights used in long-range loads. M4 cuts at the breech aid in reliable feeding. Gas port drilled for a mid-length gas system that will keep pressures lower to make extraction easier and smoother - and eliminate cycling malfunctions and hard extraction. abSPECS: 416 stainless steel, matte black finish. 18" long. .936" OD at gas port. Gas port positioned for mid-length gas system. Chambered for 5.56mm NATO. ½"-28 tpi muzzle threads. 1-8" rifling. 3.65 lb. wt.

DPMS AR-15/M16 MINI-SASS BARREL

Stable, Heavy Contour Barrel Ideal For Long-Range Shooting

#231-000-327AV SASS AR-15 Barrel, 1C217N05 � � � � � � $ 243.99

The DPMS BL-50-12D 7½" AR-15 barrel comes with an ultra-minimalist, low-profile gas block installed, so it prevents your AR pistol or SBR from being nose-heavy. M4 feed ramps help keep the ammo cycling in and out of the chamber reliably, and standard 1/2"-28 muzzle threads accept any AR-15 muzzle device you want. Machined from 4140 chrome-moly carbon steel and stress-re-lieved, head-spaced and given a tough matte dark gray manganese phosphate Parkerized finish, so it's ready to fit to your rifle. Barrel extension included. Button rifled with versatile 6 groove, 1-9" twist to stabilize a wide range of bullet weights. All NFA rules apply. abSPECS: 4140 chrome-moly steel, Parkerized finish. NOT chrome-lined. 1/2"-28 muzzle threads. 7½" long, .980" O.D. under handguard, .750 O.D. at gas block. Requires pistol-length gas tube.

DPMS AR-15

PISTOL BARRELDrop-In & Ready-To-Shoot With

Low-Profile Gas Block

#231-000-382AV BL-50-12D Barrel, 7½", 3B165K73 � � $ 205.99

AR

-15

/M16


SINCE 1939

BA

RR

ELS

24" STAINLESS STEEL BARREL - Button-rifled, stainless steel fac-tory barrel fits DPMS LR-308 upper receivers. Heavy HBAR- style contour offers extra rigidity, while longer length increases bullet velocity for greater potential accuracy than standard 20" rifle bar-rels. 1-10" twist rifling helps stabilize medium to heavy bullets. Re-cessed crown protects muzzle from dings and scratches. Gas port is drilled for standard rifle-length gas system, and barrel exterior is pre-dimpled for a .936" gas block to simplify installation. Barrel extension included. Barrel nut sold below. SPECS: Hardened 416 stainless steel, natural silver, matte finish. 24" (60cm) long. .936" (2.3cm) O.D. at gas port. Chambered for .308 Win-chester. 1-10" rifling twist. 5 lbs. (2.2kg) wt.#231-000-378AV 24" DPMS .308 Heavy SS Bbl, 1C230G69 � �$ 256.99

16" SPORTICAL BARREL - Factory barrel used on the 7.62 NATO-chambered version of the DPMS Spor-tical rifle. Heavy contour with extra-thick O.D. under handguard to provide rigidity to resist accuracy-compromising heat warp-age. Comes pre-chambered with 5/8"-24 tpi muzzle threads for mounting a standard AR-308 flash hider or compensator. Barrel nut sold below.SPECS: 4140 steel, matte black phosphate finish. 161/2" (54.6cm) OAL. .750" (1.91cm) O.D. at gas port, .980" (1.24cm) O.D. under handguard. Cham-bered for 7.62x51 NATO. 1-10" rifling twist. Muzzle threaded 5/8"-24 tpi.#231-000-281AV DPMS .308 Sportical Bbl, 1C228G98 � � $ 250.99

18" SASS FLUTED BARREL - Heavy-contour “Semi-Auto Sniper System” barrel fea-tures flutes that add rigidity while reducing weight for extra stability in long-range shooting. 7.62 x 51mm chamber accepts military ammunition, as well as .308 Winchester sporting loads. Button rifling with 1-10" twist stabilizes heavy long-range bullets. Non-reflective black Teflon® coating resists heat and corrosion. Gas port spaced for a mid-length gas system.Barrel extension included. Gas block not included. SPECS: 416 stainless steel, Teflon finish, matte black. 18" (45cm) long. .936" O.D. at gas port. 7.62 x 51 NATO chamber. 1-10" rifling twist. 5/8"-24 tpi muzzle threads.#231-000-326AV SASS .308 Fluted Barrel, 1C211B04 � $ 243.99

BARREL NUT - The correct barrel nut for use on DPMS AR-style .308/7.62 rifles.SPECS: Steel, black matte phosphate finish.#231-000-300AV DPMS .308/7.62 Barrel Nut,

1C25A19 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 27.99

DPMS AR-STYLE .308 BARRELSFactory Barrels Help Enhance Accuracy & Increase Velocity;

Carbine & Long-Range Rifle Models

24" Heavy Contour

ab

ab

ab

ab

Faxon's barrels are manufactured from high-grade stainless or carbon steel 100% in-house at their factory in Cincinnati, Ohio.

They are fully stress-relieved, magnetic particle inspected for hid-den flaws, and finished with an 11° target crown to ensure the bullet leaves the muzzle on the truest path possible. All barrels are individ-ually checked for headspace with custom gauges before they're al-lowed out the door. M4-type feed ramps in the barrel extension are standard, to aid in reliable chambering of each round. Govt/SOCOM is a mix of the standard M4 profile and a heavy profile, skinny behind the gas block, with a thicker O.D. ahead of it for a good balance of rigidity (for accuracy) and manageable weight. Pencil is skinny both

fore and aft of the gas block, for maximum weight saving. .625" O.D. at gas block journal. Gunner profile is a blend of the Government and Pencil profiles, matching the Govt taper from the extension to the gas block, with a Pencil profile from there to the muzzle. Removing the weight from the front mitigates muzzle whip, while keeping material at the rear maximizes heat resistance. Big Bore Gunner profile is the standard Gunner scaled up for larger barrels that .450 Bushmaster and .458 SOCOM chamberings. 9mm barrels are chambered for 9mm Luger (Parabellum) and designed for blowback-operated AR-15 rifles and pistols, so they do not have a gas port. Pinned Brake minimal-length rifle barrels come with a Faxon SLIM muzzle brake pinned and welded on to get the barrel length up to the legally required 16". abSPECS: 4150 chrome-moly vanadium steel (CS) or 416-R stainless steel (SS), both with black QPQ Nitride finish. Chambering/rifling: 5.56 - 5.56x45 NATO, 1-8"; 9mm - 9mm Luger, 1-10". Required gas tube lengths: RL = rifle-length; ML = mid-length. Gas Block (not included) .750" O.D. at gas block journal, except Gunner and Pencil, which are .625". Muzzle Threads - 1/2"-28 tpi.

FAXON FIREARMS AR-15/M16 BARRELSBig Variety of Contours, Chambering, Finishes & Styles - a Barrel for Whatever Need You Have

Items

STOCK # CALIBER LENGTH GAS SYSTEM MATERIAL CONTOURTHREAD

SIZE TWIST PRICE#100-022-857AV 5.56 20" Rifle/.750" CS Govt/SOCOM ½"-28 tpi 1-8" 1D181I07 $ 194.99#100-026-221AV 5.56 18" Rifle/.750" SS MK 12 Profile ½"-28 tpi 1-8" 1D199B39 $ 220.99 100-026-110AV 5.56 18" Rifle/.750" CS Govt/SOCOM ½"-28 tpi 1-8" 1D170F05 $ 170.05#100-022-856AV 5.56 16" Mid-Length/.750" CS Govt/SOCOM ½"-28 tpi 1-8" 1D156B93 $ 168.99#100-019-290AV 5.56 16" Mid-Length/.750" CS Gunner Lightweight ½"-28 tpi 1-8" 1D166A25 $ 166.25#100-019-291AV 5.56 14.5" Mid-Length/.750" CS Gunner Lightweight ½"-28 tpi 1-8" 1D156Q75 $ 156.75#100-022-861AV 5.56 14.5" w/

Brake (16")Mid-Length/.750" CS Gunner ½"-28 tpi 1-8" 1D231G20 $ 248.99

#100-022-863AV 5.56 14.5" w/Brake (16")

Mid-Length/.625" CS Pencil ½"-28 tpi 1-8" 1D240G50 $ 258.99

#100-022-854AV 5.56 11.5" Mid-Length/.625" CS Big Gunner ½"-28 tpi 1-8" 1D142H61 $ 148.99#100-026-109AV 5.56 10.5" Carbine/.625" CS Pencil ½"-28 tpi 1-8" 1D151F05 $ 151.05#100-024-957AV 223 Wylde 14.5" Mid-Length/.625" SS Pencil ½"-28 tpi 1-8" 1D203B35 $ 208.99#100-024-958AV 223 Wylde 16" Mid-Length/.625" SS Pencil ½"-28 tpi 1-8" 1D208H92 $ 213.99 100-027-973AV 223 Wylde 14.5" Mid-Length/.625" SS Gunner ½"-28 tpi 1-8" 1D210C01 $ 219.99 100-030-954AV 223 Wylde 14.5" Mid-Length/.750" SS Flame Fluted ½"-28 tpi 1-8" 1D273P93 $ 280.99 100-030-950AV 224 Valkyrie 20" Rifle/.750" SS Heavy Fluted ½"-28 tpi 1-7" 1D333B36 $ 341.99 100-030-951AV 224 Valkyrie 22" Rifle/.750" SS Heavy Fluted ½"-28 tpi 1-7" 1D342D64 $ 350.99#100-026-119AV 6.5 Grendel 16" Mid-Length/.750" SS Gunner 5/8"-24 tpi 1-8" 1D223N25 $ 223.25#100-026-120AV 6.5 Grendel 18" Mid-Length/.750" SS Gunner 5/8"-24 tpi 1-8" 1D232K75 $ 232.75#100-026-121AV 6.5 Grendel 18" Mid-Length/.750" SS Heavy Fluted 5/8"-24 tpi 1-8" 1D303A05 $ 303.05#100-026-122AV 6.5 Grendel 20" Rifle/.750" SS Heavy Fluted 5/8"-24 tpi 1-8" 1D312G55 $ 312.55#100-026-115AV 6.5 Creedmoor 18" Rifle/.750" CS Big gunner 5/8"-24 tpi 1-8" 1D274H55 $ 274.55#100-026-116AV 6.5 Creedmoor 20" Rifle/.750" SS Big Gunner 5/8"-24 tpi 1-8" 1D284B05 $ 284.05#100-026-117AV 6.5 Creedmoor 18" Rifle/.750" SS Heavy Fluted 5/8"-24 tpi 1-8" 1D379G05 $ 379.05#100-026-118AV 6.5 Creedmoor 20" Rifle/.750" SS Heavy Fluted 5/8"-24 tpi 1-8" 1D388B55 $ 388.55 100-030-955AV 6.5 Creedmoor 22" Rifle/.750" SS Heavy Fluted 5/8"-24 tpi 1-8" 1D389F07 $ 398.99 100-030-956AV 6.5 Creedmoor 24" Rifle/.750" SS Heavy Fluted 5/8"-24 tpi 1-8" 1D398G36 $ 407.99#100-026-131AV 300 AAC Blackout 7.5" Pistol/.750" CS Gunner 5/8"-24 tpi 1-8" 1D142L50 $ 142.50#100-026-132AV 300 AAC Blackout 10.5" Pistol/.750" CS Gunner 5/8"-24 tpi 1-8" 1D152L00 $ 152.00#100-026-133AV 300 AAC Blackout 16" Carbine/.750" CS Gunner 5/8"-24 tpi 1-8" 1D165J30 $ 165.30#100-026-134AV 308 Winchester 16" Mid-Length/.750" CS Big Gunner 5/8"-24 tpi 1-8" 1D227N05 $ 227.05#100-026-135AV 308 Winchester 18" Rifle/.750" CS Big Gunner 5/8"-24 tpi 1-8" 1D236J55 $ 236.55#100-026-136AV 308 Winchester 20" Rifle/.750" CS Big Gunner 5/8"-24 tpi 1-8" 1D246Q05 $ 246.05 100-027-974AV 308 Winchester 20" Rifle/.750" SS Heavy Fluted 5/8"-24 tpi 1-8" 1D324N09 $ 331.99#100-019-289AV 9mm Luger 16" None CS Straight 1/2"-28 tpi 1-10" 1D132I05 $ 132.05#100-019-288AV 9mm Luger 10.5" None CS Straight 1/2"-28 tpi 1-10" 1D122N55 $ 122.55#100-019-287AV 9mm Luger 8.5" None CS Straight 1/2"-28 tpi 1-10" 1D113N05 $ 113.05#100-019-286AV 9mm Luger 4.5" None CS Straight 1/2"-28 tpi 1-10" 1D103H55 $ 103.55 100-030-959AV 450 Bushmaster 16" Carbine/.750" CS Gunner Big Bore 11/16"-24 tpi 1-16" 1D250B71 $ 256.99 100-030-957AV 458 SOCOM 10.5" Pistol/.875" CS Gunner Big Bore 11/16"-24 tpi 1-14" 1D236M79 $ 242.99 100-030-958AV 458 SOCOM 16" Carbine/.875" CS Gunner Big Bore 11/16"-24 tpi 1-14" 1D250P71 $ 256.99

9mm 8.5"

Gunner Profile

Medium Tapered

Govt/SOCOM Profile

Faxon's flame-fluted match barrels give serious AR accuracy shooters a specially fluted barrel that promotes cooling while giving their rifles a better look. Built using 416R stainless steel and featuring button-rifled 1-8" twist bores, the Flame has a .223 Wylde chamber, meaning it's optimized for both civilian .223 Remington and military 5.56 NATO ammo (the two are NOT the same), as well as target loads with longer, heavier bullets. All barrels have a tough, QPQ Black Ni-tride finish, with a 1/2"-28 tpi threaded muzzle and .750" O.D. nominal at gas journal. Faxon Flame-Fluted barrels is available in several bar-rel lengths, with mid-length (ML) and rifle-length (RL) tube lengths to choose from. All come with barrel extension installed. ab

Looks So Hot - Stays Cool Under Pressure

#100-024-812AV 223 Wylde Match Bbl, 16"/ML, 1D283C20 � � $ 289.75#100-024-813AV 223 Wylde Match Bbl, 18"/RL, 1D292N50 � � 299.25#100-024-814AV 223 Wylde Match Bbl, 20"/RL, 1D301Q80 � � 308.75

FAXON FIREARMS AR-15

.223 WYDLE "FLAME" BARRELS

These barrels are the same ones installed in the Foxtrot Mike Products pistol caliber AR-15s. They're precision-machined from high-grade, 41V50 chrome-moly-vanadium steel alloy, and but-ton-rifled for impressive accuracy and match-grade performance. Deep-penetrating salt bath Nitride QPQ/Melonite finish for superb resistance to wear and corrosion. You can put a lot of rounds down-range because these barrels are built to handle rapid-fire shooting! Ultralight barrels are the same ones installed on FM's Ultralight rifles at the factory. Unnecessary metal that adds nothing but extra weight without improving performance has been removed. FM-9 barrels have SAAMI-spec 9mm Luger chambers and are compat-ible with uppers designed designed to work with Colt and Glock® magazines. Integrated feed ramps ensure reliable chambering and smooth extraction of rounds, while the 1-10" rifling stabilizes all 9mm bullet weights. ½"-36 threaded muzzle is ready for the comp/hider/brake/suppressor of your choice! FM-45 barrels have all the same features but are, of course, chambered in .45 ACP, with 1-16" rifling, and 5/8"-24 tpi muzzle threads. Tri-Lug 9mm barrel is available ONLY from Brownells and is the ideal host for a sound suppressor. It will accept ANY H&K-style tri-lug sound suppressor or the tri-lug adapter that just about all suppressor manufacturers make. ab

FM PRODUCTS AR-15

FM-9/FM-45 PISTOL CALIBER BARRELS

Match-Quality Barrels for Custom Carbine or Pistol Builds

#100-032-876AV FM-9 9mm 16" Barrel, ½"-36 tpi, 6D99N00 � � � � � � � � � � � � � � � � � � � � � � � � � $ 99.00

#100-032-877AV FM-9 9mm 8.5" Barrel, ½"-36 tpi, 6D00KVP � � � � � � � � � � � � � � � � � � � � � � � � � � 85.00

#100-032-878AV FM-9 9mm 7" Bbl, ½"-36 tpi, 6D00NZL � � 85.00#100-035-376AV FM-9 9mm Tri-Lug Barrel, 10.5",

6D129N00 � � � � � � � � � � � � � � � � � � � � � � � � � 129.00#100-032-879AV FM-45 45 ACP 16" Barrel, 5/8"-24 tpi,

6D00LEN � � � � � � � � � � � � � � � � � � � � � � � � � � 99.00#100-032-880AV FM-45 45 ACP 8.5" Barrel, 5/8"-24 tpi,

6D00GLK � � � � � � � � � � � � � � � � � � � � � � � � � � 85.00

FM-9 16" Carbine

FM-9 7" Pistol

Tri-Lug 9mm 10.5"

Cold hammer-forged from high-grade chrome-moly alloy steel, these barrels are designed to have the same durability as FNH’s full-auto machine gun barrels. Each barrel is magnetic particle in-spected (MPI) to ensure it is free of micro-stresses and other flaws. Chrome-lined bore and chamber resist heat erosion and corro-sion, enhancing barrel life, while delivering reliable chambering and extraction. The M4-type feed ramps and barrel extension further ensure reliable, consistent feeding. Durable manganese phosphate finish gives superior resistance to external corrosion and oxida-tion. Chambered in 5.56 with a 1-7" right-hand twist and 1/2" x 28 tpi muzzle threads. All models have a government profile and accept .750" gas blocks. Available with gas port drilled for carbine-, rifle-, or mid-length gas tubes in lengths indicated below. abSPECS: Chromium-molybdenum-vanadium alloy steel, manganese phosphate finish, matte black. 1.6 lbs. (725.7g) wt. .750" (1.9cm) O.D. at gas port. 1-7" rifling. 1/2" x 28 tpi muzzle threads.

FNH USA AR-15/M16

HAMMER-FORGED BARRELS

Built For Strength, Durability & Reliability

#100-700-160AV 14.5" Carbine Barrel , 9A299K00 � � � � $ 299.00#100-700-161AV 16" Carbine Barrel, 9A299J00 � � � � � � 299.00#100-700-162AV 16" Mid-Length Barrel, 9A299C00 � � 299.00#100-700-163AV 18" Rifle Barrel, 9A299C00� � � � � � � � � 299.00#100-700-164AV 20" Rifle Barrel, 9A286A00 � � � � � � � � � 299.00

Orders: 800-741-0015

AR

-15/M

16B

AR

RE

LS

PAGE 27order on the web

brownells.com

Extra barrel for the Ares MCR installs with just the push of a lever. Chambered in 5.56mm NATO, these barrels are chrome-lined with a 1-7" twist and include an adjustable gas system. Heavy contour barrel has ½"-28 muzzle threads and comes with an A2 flash hider. Fits Ares Defense MCR weapon systems only. abSPECS: 4140 steel, matte black, manganese phosphate finish.

ARES DEFENSE

MCR BARREL ASSEMBLYSpare Barrel For

Your MCR

#100-019-949AV 12.5" MCR Bbl Assy , 9G00QBS � � � � $ 570.00#100-019-948AV 16.25" MCR Bbl Assy , 9G00BZJ � � � � 570.00

Designed especially for the LMT MRP/MWS upper receivers, these proprietary barrels allow you to swap barrels quickly and conveniently for flexibility in caliber, length, and even gas systems. Carbon steel (CS) barrels are chrome-lined. Stainless steel (SS) bar-rels have a non-reflective matte black finish. MRP barrels boast a 1-7" twist, DI gas system, and A2 style flash hider. 300 AAC Blackout (300 BLK) MRP barrels have a 1-7" twist and come with a low pro gas block, straight gas tube, A2 flash hider, and proprietary mounting interface. MWS 6.5 Creedmoor barrels are made from cryogenically treated stainless steel with 5R rifling, 1-8" twist, and a black finish. Includes gas block, straight gas tube, A2 flash hider, and proprietary mounting interface. The 16" stainless steel MWS .308 barrels are chrome lined with a 1-10" twist. Comes with a low pro gas block, straight gas tube, A2 flash hider, and proprietary mounting interface. The 20" .308 barrel is made from cryogenically treated stainless steel with black finish, and boasts a 1-11.25" twist. ab

LEWIS MACHINE & TOOL (LMT) AR-15/AR-308

MRP/MWS BARRELS

Gives Your Upper Receiver Added Versatility

#100-030-177AV 5.56 MRP Barrel, CS/10.5", 4A00JPF � �$ 459.00#100-030-178AV 5.56 MRP Barrel, CS/14.5", 4A459G00 � � 459.00#100-030-179AV 5.56 MRP Barrel, CS/20", 4A00DLS � � 459.00#100-030-175AV 300 BLK MRP Bbl, CS/16", 4A00PKA � � 459.00#100-030-176AV 300 BLK MRP Bbl, CS/10.5", 4A00KTE � � 459.00#100-030-187AV .308 MWS Lightweight Barrel,

CS/16", 4A00MGK � � � � � � � � � � � � � � � � � 549.00#100-030-188AV .308 MWS Barrel, CS/16", 4A499K00 � � 499.00#100-030-189AV .308 MWS Barrel, SS20", 4A00HHB � � 599.00#100-030-185AV 6.5 Creedmoor MWS Barrel, SS/20",

4A599A00 � � � � � � � � � � � � � � � � � � � � � � � � 599.00#100-030-186AV 6.5 Creedmoor MWS Barrel, SS/24",

4A599J00 � � � � � � � � � � � � � � � � � � � � � � � � 599.00

Orion's pistol-length 9mm-chambered barrels come in your choice of 3" or and 16" length. Made of 4140 chrome-moly steel, heat treated and stress relieved, then given a tough black Nitride finish. They are stress relieved again after the button rifling process(1-10" twist). 5/8-24" muzzle threads. ab

ORION AR-15/M16

9MM BARRELSChoose the Length You Want for Your

Next AR Pistol

#100-022-728AV 3" 9mm AR Pistol Barrel, 5K86K67 � � � $ 107.99#100-019-998AV 16" 9mm AR-15 Carbine Barrel,

5K95J48 � � � � � � � � � � � � � � � � � � � � � � � � � � 122.99

Proof Research’s match-grade carbon fiber barrels are stronger, lighter, and just as accurate as the finest precision-made steel bar-rels. The core of this barrel is a 416-R stainless steel barrel blank with an O.D. much narrower than a standard barrel. It is then wrapped with a high-strength, aerospace-grade resin-impregnated carbon fiber composite that has a specific strength up to 30 times greater than steel and a specific stiffness 7 times greater. The result is a barrel that's 64% lighter than an all-steel one, with outstanding heat-dissipation properties, much greater resistance to accuracy-compromising harmonic vibration, and almost no point-of-impact shift during long shooting sessions. Barrels that stay cool also last longer. You can build an AR-pattern rifle capable of delivering outstanding accuracy, yet won't give you a hernia when you lug it around. .223 Wylde barrels have a "medium" exterior contour and a specially configured chamber that gives excellent performance from both military 5.56 NATO and civilian .223 Remington ammo. .750" O.D. at gas journal. 1/2"-28 tpi muzzle threads. Heavy-contour 6.5 Creedmoor and .260 Rem barrels require an extra-long gas tube that combats the bolt carrier velocity and dwell time problems that sometimes plague AR-15s chambered for these cartridges. Gas tube is included with barrel. Also requires use of a JP Enterprises high-pressure EnhancedBolt (#452-000-113, sold separately) for best function. .875" O.D. at gas journal. 5/8"-24 tpi muzzle threads. abSPECS: Required gas tube lengths: RL = rifle-length; ML = mid-length; CL = carbine-length; PL = pistol-length; +2RL = 2" longer than standard rifle (tube included with barrel).

PROOF RESEARCH AR-15/M16/AR-308

CARBON FIBER BARRELS

Two-Thirds Less Weight Than All-Steel Barrels, Just as Accurate, Faster Cooling

#100-023-317AV 20" .223 Wylde Barrel, 1-8"/RL, 7Z00AQA � � � � � � � � � � � � � � � � � � � � � � � � � $ 940.00

#100-023-316AV 18" .223 Wylde Barrel, 1-7"/RL, 7Z00LXH � � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-023-315AV 16" .223 Wylde Barrel, 1-8"/ML, 7Z00MQG � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-023-314AV 12.5" .223 Wylde Barrel, 1-7"/CL, 7Z877H30 � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-023-309AV 11.5" .223 Wylde Barrel, 1-7"/CL, 7Z877J30 � � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-023-318AV 12.5" .223 Wylde Barrel, 1-8"/PL, 7Z877G30 � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-023-307AV 24" 6.5 Creedmoor Barrel, 1-8"/+2RL, 7Z00IXE � � � � � � � � � � � � � � � 829.00

#100-023-305AV 22" 6.5 Creedmoor Barrel, 1-8"/+2RL, 7Z00FXL � � � � � � � � � � � � � � � 940.00

#100-024-296AV 20" 6.5 Creedmoor Bbl, 1-8"/+2RL, 7Z00JKF � � � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-023-308AV 24" .260 Rem Barrel, 1-8"/+2RL, 7Z762N41 � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-023-306AV 22" .260 Rem Barrel, 1-8"/+2RL, 7Z869M50 � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-024-297AV 20" .260 Rem Barrel, 1-8"/+2RL, 7Z00EUM � � � � � � � � � � � � � � � � � � � � � � � � � 940.00

The PR-10 barrel provides owners of an AR-308 size rifle cham-bered in .260 Remington or 6.5 Creedmoor with a number of en-hanced features over traditional barrel styles. These long-range specific barrels provide the ultimate in accuracy and will maintain their performance in the harshest of conditions. PR-10 barrels are cut rifled from double-stress relieved 416R stainless steel and fea-ture a threaded muzzle with a 5/8 x 24" tpi thread pitch for the ad-dition of muzzle accessories. They use Proof's innovative CamGas system, which works to reduce the speed of the bolt carrier for improved overall function and reliability of the rifle. Better cooling properties provide improved barrel life. POI shift does not occur dur-ing extended fire strings. This all adds up to enhanced accuracy on par with traditional match-grade barrels. The proprietary CamGas tube is included, but requires use of a JP enhanced high-pressure bolt for best function (#452-000-113). The PR-10 barrel provides owners of an AR-308 size rifle chambered in .260 Remington or 6.5 Creedmoor with a number of enhanced features over traditional barrel styles. These long-range specific barrels provide the ultimate in accuracy and will maintain their performance in the harshest of conditions. PR-10 barrels are cut rifled from double-stress relieved 416R stainless steel and feature a threaded muzzle with a 5/8 x 24" tpi thread pitch for the addition of muzzle accessories. They use Proof's innovative CamGas system, which works to reduce the speed of the bolt carrier for improved overall function and reliability of the rifle. Better cooling properties provide improved barrel life. POI shift does not occur during extended fire strings. This all adds up to enhanced accuracy on par with traditional match-grade barrels. The propri-etary CamGas tube is included, but requires use of a JP enhanced high-pressure bolt for best function (#452-000-113). ab

PROOF RESEARCH AR-308

PR-10 BARRELS

Match-Grade Barrels Chambered in Alternate, Long-Range Calibers

#100-024-293AV 20" 6.5 Creedmoor PR-10 Bbl, 1-8"/+2RL, 7Z00ECM � � � � � � � � � � � � � � $ 479.00

#100-024-294AV 22" 6.5 Creedmoor PR-10 Bbl, 1-8"/+2RL, 7Z00KDC � � � � � � � � � � � � � � 445.00

#100-024-295AV 24" 6.5 Creedmoor PR-10 Bbl, 1-8"/+2RL, 7Z00NKJ � � � � � � � � � � � � � � 445.00

#100-024-297AV 20" .260 Rem Barrel, 1-8"/+2RL, 7Z00EUM � � � � � � � � � � � � � � � � � � � � � � � � � 940.00

#100-024-299AV 22" .260 Rem PR-10 Barrel, 1-8"/+2RL, 7Z00NMD � � � � � � � � � � � � � 479.00

#100-024-300AV 24" .260 Rem PR-10 Barrel, 1-8"/+2RL, 7Z00CAI � � � � � � � � � � � � � � � 445.00

Stainless steel barrel is precision machined to match-grade tolerances and custom-fit to its own bolt to give your rifle the ex¬ceptional accuracy of a custom-shop barrel in a drop-in pack-age. Each barrel is assigned a bolt before any machining begins, then chambered to the correct headspace for that bolt. Button rifled for superior land-to-groove dimensions required for match-rifle accuracy, with a recessed 90° target crown, and gas block shank machined to .001" tolerances for precise fit. Comes with M4-style barrel extension installed; extension has pre-cut feed ramp to help ensure reliable chambering of rounds. Available chambered in .204 Ruger with 24" heavy varmint/target barrel or .223 Wylde with 20" service-rifle contour barrel. Wylde chamber delivers enhanced ac-curracy and reliability with the widest variety of .223 or 5.56 NATO

SHILEN AR-15/M16

DROP-IN BARREL/BOLT SET

Custom-Fitted For Match-Grade Performance

#787-000-034AV .223 Wylde Barrel/Bolt Set, 7H402B12 � � � � � � � � � � � � � � � � � � � � � � � � $ 462.99

#787-000-035AV .204 Ruger Barrel/Bolt Set, 7H405Q80 � � � � � � � � � � � � � � � � � � � � � � � 429.99

#787-000-037AV 300 AAC Blackout Barrel/Bolt Set, 7H469F11 � � � � � � � � � � � � � � � � � � � � � � � � � 509.99

ammunition. 300 AAC Blackout works with both sub-sonic and super-sonic ammo and has 5/8" x 24 muzzle threads. abSPECS: Stainless steel, natural finish. .223 Wylde - 20" (50.8cm) long, .750" O.D. at gas block. 1-8" twist, 6 groove rifling. .204 Ruger - 24" (60.1cm) long, .936" O.D. at gas block. 1-9" twist, 6 groove rifling. 300 AAC Black-out - 16" (40cm) long, .750" O.D. at gas block. 1-7 twist, 6 groove rifling.

The Lightweight THM Tension Barrel is a top-quality match-grade barrel for the Smith & Wesson's dedicated .22 LR AR-15 rifle. It sets the standard for what a lightweight barrel should be. It features a sleeve that is used to create tension on the barrel itself. This unique design eliminates issues typically found in smaller barrel profiles. The THM tension barrel consists of a special taper honed match barrel and chamber. With the weight-reduction benefit of the car-bon fiber sleeve, all-up weight is only 14 oz., while at the same time the barrel is extremely rigid and resistant to resonances that can compromise accuracy. This is the ultimate lightweight barrel. It has 1/2"-28 tpi muzzle threads up front, so this barrel will accept any standard .223/5.56 AR-15 muzzle device. ab

VOLQUARTSEN SMITH & WESSON M&P15-22

CARBON FIBER BARREL

A Premium Target Barrel To Help You Maximize the Accuracy of Your S&W .22 AR

#930-000-161AV M&P15-22 Match Carbon Barrel, 3Z296E08 � � � � � � � � � � � � � � � � � � � � � � � � $ 312.00

Precision-machined stainless steel barrels feature a .223 Wylde chamber that helps maximize the long-range performance of your AR-15 with both .223 Remington and 5.56x45mm NATO ammuni-tion. With 6-groove, 1-7" button rifling for accuracy and M4-type feed ramps for reliable feeding, these barrels help you reach out to distant targets with issued or magazine-length ammunition. 16" barrel is available in standard carbine or SDM profile, based on the Army’s Squad Designated Marksman rifle. It features 12 large flutes to reduce weight and help cooling and has a mid-length gas system. The 18" barrels offer the Special Purpose Rifle (SPR) profile designed to optimize accuracy out to 600 meters, and are available with Mid-Length or Rifle-Length gas systems. Threaded muzzle accepts a variety of compensators or flash suppressors. abSPECS: Stainless steel, natural finish. .750" (1.9cm) O.D. at gas port. Barrel extension .999" (2.5cm) O.D. 6-groove, 1-7" rifling. Muzzle threads: 1/2"-28 tpi.

WHITE OAK ARMAMENT

MATCH BARRELS

Wylde Chamber Helps Maximize Performance With .223 Or 5.56 Ammo

#100-009-769AV .223 Wylde 16" Carbine Barrel, 8K244L28 � � � � � � � � � � � � � � � � � � � � � � � � �$ 259.99

#100-015-126AV .223 Wylde SDM 16" Mid-Length Barrel, 8K344A97 � � � � � � � � � � � � � � � � � � 383.99

#100-009-961AV .223 Wylde 18" Mid-Length SPR Barrel, 8K245P20 � � � � � � � � � � � � � � � � � � 271.99

#100-009-962AV .223 Wylde 18" Rifle SPR Barrel, 8K249Q14 � � � � � � � � � � � � � � � � � � � � � � � � � 303.99

So simple, yet so critical to finishing the job. A necessary component for installing the barrel on any new custom rifle. And when refurbishing an old gun, why reinstall a worn, dinged-up old barrel nut, when you can replace it with this high-quality DPMS part instead? One end is grooved for the snap ring, the other has indentations to engage a barrel nut wrench. abSPECS: Steel, black oxide finish. Fits mil-spec AR-15/M16 upper receiver with 13/16"-16 tpi threads.

DPMS AR-15/M16 BARREL NUTCan't Install The Barrel Without It!

#231-000-360AV Barrel Nut, 1C9J62 � � � � � � � � � � � � � � � � � � $ 11.79

AR

-15

/M16


SINCE 1939

CO

MP

S/FL

ASH

HID

ER

S

M4-type barrel extension has a self-lubricating EXO finish that aids in smooth, consistent feeding and helps prevent hang-ups. High-tech coating lasts the life of the weapon, and won’t rub off, flake

off, or gall. Helps dissipate heat for cooler operation, too. Precision machined from 8620 steel to USGI specifications with integral M4-type feed ramps and predrilled locator pin hole. abSPECS: 8620 carbon steel, EXO coated, silver-gray. .998" O.D., 1.168" shoulder O.D. .8125"-16UNF thread. Barrel locator pin required, available separately.

FAILZERO AR-15/M16

EXO™ BARREL EXTENSIONSelf-Lubricating Surface Promotes

Smooth, Consistent Feeding

#100-005-443AV EXO Barrel Extension, 8B22I38 � � � � � � $ 25.99

Economical, high-quality M4 barrel ex-tension is machined to mil-spec standards with integral feed ramps and predrilled loca-tor pin hole for fast, easy barrel installations. Machined from 4140 chrome-moly steel and

head-treated for additional surface hardness to resist erosion by hot combustion gases for years of reliable service. Great for custom barrel jobs and caliber conversions. abSPECS: 4140 chrome-moly steel, in-the-white. .8125"-16UNF thread. Bar-rel locator pin required, available separately.

WHITWORTH TOOL AR-15/M16

M4 BARREL EXTENSION

#100-004-728AV M4 Barrel Extension, 5B16I65 � � � � � � � $ 19.99

Fits Rifle Or Carbine Barrels; Ramped To Help Guide Rounds Into Chamber

Manufactured from high-grade 416R stainless steel, these AR-15 barrels from Wil-son Combat are purpose-built to provide improved accuracy, reliability and long service life over similar barrel profiles currently available. Includes M4-style feed ramps. Howe contour provides match-grade performance. Lightweight Ranger is ideal for light-weight or hunting AR builds. Recon excels at a range of applications. The match-grade Super Sniper boasts tight-tolerance button rifling for a heightened level of accuracy. SBR Tactical barrel is optimized for suppressors and subsonic loads. Tactical Hunter barrel have been profiled to deliver the ideal weight, balance, and harmonics in modern hunting rifles. 300 HAMR barrels use Wilson's proprietary Intermediate-Length Gas Tube, which is unique to these barrels. It's not included with barrel - sold separately, below. ab

STOCK # CALIBER CONTOUR GAS SYSTEM LENGTH MATERIAL THREAD SIZE TWIST PRICE#965-000-299AV 5.56 NATO Howe Fluted Mid-Length/.750" 14.7" SS 1/2-28 tpi 1-8" 5F00EBM $ 284.95#965-000-300AV 5.56 NATO Ranger Mid-Length/.750" 16" SS 1/2-28 tpi 1-7" 5F00KLM $ 249.95#965-000-302AV 5.56 NATO Recon Mid-Length/.750" 16" SS 1/2-28 tpi 1-7" 5F00PVM $ 249.95#965-000-301AV 5.56 NATO Recon Fluted Mid-Length/.750" 16" SS 1/2-28 tpi 1-7" 5F00AWP $ 284.95#965-000-303AV 5.56 NATO Recon Fluted Rifle/.750" 18" SS 1/2-28 tpi 1-8" 5F00CIR $ 284.95#965-000-304AV 223 Wylde Super Sniper Fluted Rifle/.875" 20" SS 1/2-28 tpi 1-8" 5F304J95 $ 304.95#965-000-305AV 6.5 Creedmoor Super Sniper Fluted Rifle/.875" 24" SS 5/8"-24 tpi 1-8" 5F334B95 $ 334.95#965-000-307AV 6.8mm SPC II Ranger Mid-Length/.750" 16" SS 5/8"-24 tpi 1-11" 5F249F95 $ 249.95#965-000-306AV 6.8mm SPC II Recon Fluted Mid-Length/.750" 16" SS 5/8"-24 tpi 1-11" 5F284E95 $ 284.95#965-000-308AV 300 AAC Blackout Pistol/SBR Tactical Pistol/.750" 8" SS 5/8"-24 tpi 1-7" 5F00FMS $ 229.95#965-000-310AV 300 AAC Blackout Ranger Pistol/.750" 16" SS 5/8"-24 tpi 1-7" 5F249L95 $ 249.95#965-000-309AV 300 AAC Blackout Recon Fluted Pistol/.750" 16" SS 5/8"-24 tpi 1-7" 5F00JQH $ 284.95#965-000-326AV 300 HAMR Ranger Intermediate/.750" 16.2" SS 5/8"-24 tpi 1-15" 5F00LGD $ 249.95#965-000-327AV 300 HAMR Bill W Ranch Intermediate/.750" 18" SS 5/8"-24 tpi 1-15" 5F00CHE $ 249.95#965-000-328AV 300 HAMR Tactical Hunter Fluted Intermediate/.750" 18" SS 5/8"-24 tpi 1-15" 5F284L99 $ 284.99#965-000-329AV 300 HAMR Tactical Hunter Fluted Intermediate?? 20" SS 5/8"-24 tpi 1-15" 5F269P95 $ 269.95#965-000-311AV 308 Winchester Recon Fluted Intermediate 16" SS 5/8"-24 tpi 1-11.25" 5F00AWK $ 314.95

#965-000-330AV Intermediate-Length Gas Tube, 5F00PWP � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 12.95

Ranger

Super Sniper FlutedRecon

FlutedPistol/SBR Tactical

Howe Fluted

Precision-Machined Stainless Steel Alloy for Enhanced Accuracy, Durability & Service Life

WILSON COMBAT AR-15/AR-308 MATCH-GRADE BARRELS

BA

RR

ELS

High-quality stainless steel crush washer en-sures correct alignment of flash suppressor, com-

pensator or muzzle brake. Replace a broken, corroded, or dinged up washer to guarantee proper fit and indexing of an aftermarket muzzle accessory. Washers available for AR-15, M16 and AR-style .308 barrels. abSPECS: 17-4 PH stainless steel.

AR-15/M16/AR-STYLE .308

CRUSH WASHERSEnsures Proper Fit of Flash Suppressor

Or Muzzle Brake

#080-001-252AV 1/2" Crush Washer, 3G2P39 � � � � � � � � � � � � $ 2.99#080-001-253AV 5/8" Crush Washer , 3G3M39 � � � � � � � � � � � 3.99

Standard crush washer (not a peel wash-er!) for adjusting the gap between the rear

of the muzzle device and the shoulder on the barrel behind the threads. Make sure the cupped face points toward the muzzle. Two sizes to choose from for AR-15s and AR-style .308s. ab

Traditional-Style Washers for Ensuring Proper "Timing" of Muzzle Device

#100-028-048AV .223/5.56 Crush Washer, 1/2"-28 tpi, 3D1E66 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 2.34

#100-028-067AV .308/7.62 Crush Washer, 5/8"-24 tpi, 3D2G14 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.81

LUTH-AR AR-15/M16/AR-308

CRUSH WASHERS

These stainless steel washers are precisely machined to within .0001" to allow accurate indexing of muz-zle brakes and flash hiders without

the need for peel or crush washers. Set includes 18 individual wash-ers of different thicknesses to allow 360 degree timing in 20 degree increments. Only one washer is needed for each application. abSPECS: Stainless steel, matte gray finish. Sets available for 1/2" x 28 and 5/8" x 24 threads. Set includes 18 washers and instructions.

Indexes Muzzle Accessories Precisely Without Peel Or

Crush Washers

#100-009-793AV 1/2" x 28 Accu-Washer Alignment System, 2D21G31 � � � � � � � � � � � � � � � � � � �$ 25.99

#100-010-537AV 5/8" x 24 Accu-Washer Alignment System, 2D21H31 � � � � � � � � � � � � � � � � � � � 25.99

PRECISION ARMAMENT AR-15/M16/AR-STYLE 308

ACCU-WASHER MUZZLE DEVICE ALIGNMENT SYSTEM

Hardened steel shims ensure precise fit and cor-rect alignment of flash suppressors, muzzle brakes, and compensators. Large (thick) shim allows 90° of rotation and can be used as a spacer for barrels not having a relief cut behind the threads. Medium shims add approximately 45° of rota-tion. Small shims used with large and medium shims provide smaller degrees of rotation for finely-tuned, critical alignment.SPECS: Steel. Sold in 10 paks (1 small, 1 large, 8 medium). .223 - .748" O.D. Fits muzzles threaded 1/2"-28 tpi. .308 - .837" O.D. Fits muzzles threaded 5/8"-24 tpi.

PWS AR-15/M16/AR-STYLE .308

MUZZLE DEVICE ALIGNMENT SHIMSEnsures Correct Alignment Of Flash Hiders,

Compensators & Muzzle Brakes

#100-005-378AV .223 Shim Set, 4B4P48 � � � � � � � � � � � � � � $ 4.99#100-005-379AV .308 Shim Set, 4B4I60 � � � � � � � � � � � � � � � 4.99

Precision machined steel washer ensures exact alignment of flash suppressors and other muzzle accessories that require a wash-er. Fits AR-style .308 rifles with 5/8" threaded muzzles. abSPECS: Steel, blued. 5/8" (.625"/1.59cm) I.D. 13/16" (.813"/2.06cm) O.D.

For Accurate Alignment Of Flash Suppressors & Other Muzzle Accessories

#100-003-123AV 5/8" Crush Washer, 9A3A49 � � � � � � � � � $ 4.89

YANKEE HILL MACHINE AR-STYLE .308

CRUSH WASHER

Prevent unwanted and expensive damage to your rifle’s muzzle threads and crown with easy-to-install thread protectors. Knurled exterior gives you a firm grasp to install or remove the protector in seconds. Available in popular thread sizes and diameters to match most commonly available rifle barrels. abSPECS: Stainless steel, silver finish, except FAL, black finish. 1/2 oz. (14g) wt.

YANKEE HILL MACHINE AR-15/M16/AR-STYLE .308

MUZZLE THREAD PROTECTORSKeeps Threads Pristine When Flash Hider Or

Muzzle Brake Isn’t Installed

STOCK # THREADS O.D. PROFILE PRICE#100-009-091AV 1/2"-28 .920" Bull 9A11A49 $ 13.69#100-009-092AV 1/2"-28 .720" Standard 9A10L75 $ 15.29#100-009-093AV 1/2"-28 .635" Pencil 9A10H75 $ 15.29#100-009-094AV 5/8"-24 .920" Bull 9A10J25 $ 14.59#100-009-095AV 5/8"-24 .720" Standard 9A10E25 $ 14.59

The AAC Brakeout 2.0 comp gives you the best of both a compensator and a traditional flash suppressor. The

closed-bottom compensator section effectively redirects gas to keep muzzle rise to a minimum, while the three-pronged flash hider at the front significantly reduces flash signature, even on short bar-rels. Symmetrical prong layout eliminates requirement for “timing” with shims for fast, easy installation. Beefy, solid steel construction and an ultra-hard SCARmor™ finish make the Brakeout 2.0 highly resistant to blast erosion, allowing it to stand up under harsh operat-ing conditions. Includes an adapter for attachment of AAC sound suppressors. 51T models accept AAC 51T Fast-Attach sound sup-pressors. 90T models accept SR series sound suppressors. abSPECS: Steel, matte black SCARmor finish. 2.375" OAL. Length installed on rifle – 1.75". Mount – Ratchet mount. Approx. 4.2 oz. wt. Includes one-time use tube of Rocksett thread-locker and shims for installation. AR-15 fits rifles chambered in .223/5.56mm with ½"-28 tpi muzzle threads. AR-308 fits .308/7.62mm rifles with 5/8"-24 tpi muzzle threads.

ADVANCED ARMAMENT AR-15/M16/AR-STYLE .308

BRAKEOUT 2.0 COMPENSATORDual-Duty Device Reduces Flash &

Controls Muzzle Rise

#276-000-044AV AR-15 Brakeout 2.0, 51T, 6G106J67 � � � $ 125.99#276-000-066AV AR-15 Brakeout 2.0, 90T, 6G101D79 � � 109.99#276-000-045AV AR-308 Brakeout 2.0, 51T, 6G98E92 � � 116.99#276-000-067AV AR-308 Brakeout 2.0, 90T, 6G90C67 � � 92.99

At just 13/4" long, this high-performance muzzle brake adds minimal bulk to the muzzle. Left and right side ports vent gasses evenly to reduce felt recoil and muzzle rise – en-abling quicker, more accurate follow-up shots. Underside is solid to eliminate dust printing when shooting from the prone position. abSPECS: 4140 steel, matte black. 13/4" (4.4cm) long. 1" (2.5cm) O.D. Crush washer included. 5.56/.223 – 2.8 oz. (79.3g) wt. Fits barrels with 1/2"-28 tpi threads. 7.62/.308 – 2.5 oz. (70.8g) wt. Fits barrels with 5/8"-24 tpi threads.

BADGER ORDNANCE AR-15/M16/AR-STYLE .308

MICRO MUZZLE BRAKECompact Brake Reduces Felt Recoil &

Muzzle Rise

#093-000-047AV 5.56/.223 Micro Muzzle Brake, 3K90E99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 94.99

#093-000-046AV 7.62/.308 Micro Muzzle Brake, 3K90M99 � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99

Designed to dramatically reduce blast pressure and concussive forces, the BlastOut redirects escaping muz-zle gases forward and away from the shooter, making the shooting experi-ence more enjoyable. Bystanders will also appreciate the diminished con-cussion and noise. The AAC Fast Attach mounting system permits easy, one-handed mounting. 90T Blas-tOut is compatible with SR-series silencers only. abSPECS: Steel, Nitride finish, matte black. 2.5" (6.3cm) OAL. 6 oz. (170.1g) wt. #276-000-078AV Blastout Muzzle Device 51T,

6G116Q66 � � � � � � � � � � � � � � � � � � � � � � � � �$ 133.99#276-000-079AV Blastout Muzzle Device 90T,

6G116A66 � � � � � � � � � � � � � � � � � � � � � � � � � 133.99

Redirects Blast Pressure & Concussive Forces

ADVANCED ARMAMENT AR-15

BLASTOUT MUZZLE DEVICE

Orders: 800-741-0015

Multi-purpose compensator reduces muzzle climb, so you stay on target be-tween shots during rapid fire engage-ments. Reduces flash signature and produces less concussion than the standard A2 flash hider for a smaller dust signature when shooting prone. 1.0/1.5/2.0 fit .223/5.56 rifles with 1/2"-28 tpi muzzle threads. 1.5 is pre-drilled for permanent pinning to a 14.5" barrel to extend it to a civilian-legal 16.1" OAL. 2.0 has the correct dimensions to accept add-on muzzle devices that fit over the standard A2 flash suppressor, including Gemtech Halo and AAC OMNI suppressors; does not accept blank firing adapter (BFA). abSPECS: Machined 17-4 PH stainless steel in natural silver matte stain-less (MS) or with MIL-DTL 13924D Class IV black oxide finish. All models include required crush washer and/or shims. 1.0/1.5/2.0 fit .223/5.56 bar-rels with 1/2"-28 tpi muzzle threads. 1.0/2.0 - 13/4" (4.5cm) OAL. 1.5 – 21/8" (5.4cm) OAL.

BATTLECOMP ENTERPRISES AR-15/M16

BATTLECOMPMulti-Mode Compensator Reduces

Muzzle Climb & Suppresses Flash

#100-008-511AV Battle Comp 1.0, Black, 3G136N35 � � �$ 149.99#100-008-512AV Battle Comp 1.5, Black, 3G141K25 � � � 145.00#100-008-514AV Battle Comp 2.0, Black, 3G00GWE � � � 165.00

High-efficiency flash suppressor features five prongs and large, tapered interior that work together to cool hot gasses before dispersing through the five longitudinal vents. Reduce the blinding, football-sized fireball of an unsup-pressed rifle to a low-intensity golf-ball sized burst, so muzzle flash is less likely to give away the operator’s position, day or night, and it helps preserve night vision. Machined from hardened tool steel to resist blast erosion, with a tough, non-reflective black oxide finish. Wrench flats on either side aid in easy installation. abSPECS: Tool steel, hardened to Rc 40-45, black oxide finish. Crush washer or peel washer required, sold separately. 2¾" (6.9cm) long, .860" O.D. 3 oz. (86g) wt. Fits .30 caliber, 7.62mm, or 6.8mm rifles with 5⁄8"-24 muzzle threads.

Kills Flash To Conceal Your Position & Preserve Night Vision

#080-000-998AV AR-308 5P Flash Supp, 8K39E99 � � � � $ 44.99

AR-308

5P FLASH SUPPRESSOR

Our low-profile muzzle brake effectively reduces recoil and muzzle rise, yet adds less than 1" length to

the barrel. Two rows of ports evenly distribute exiting gases and pressure to really keep that muzzle down. Wrench flats give simple installation. The Short Muzzle Brake comes in both .223/5.56mm with black oxide or natural stainless steel finish and .308/7.62mm in stainless steel only. abSPECS: Machined stainless steel, matte black oxide (MB) or natural silver (SS) finish. 1" long. .223/5.56mm - .75" O.D. Fits ½"-28 tpi muzzle threads. .308/7.62mm - 1" O.D. Fits 5⁄8"-24 tpi muzzle threads.


SHORT MUZZLE BRAKEOffers Maximum Braking In Smallest Possible Size

Black

#080-000-995AV .223/5.56 Short Muzzle Brake, Black, 8K52A19 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 59.99

#080-000-996AV .223/5.56 Short Muzzle Brake, SS, 8K52E19 � � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99

#080-102-578AV .308/7.62 Short Muzzle Brake, SS, 8K55P19 � � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99

Stainless

Machined from bar stock with an integral, solid baffle that won’t shoot out. Top and side ports counter recoil and muzzle rise. Solid bottom controls dust printing. A 2-style looks correct on pre- and post-ban rifles. ab

SPECS: Steel, black, matte finish. 13/4" (4.4cm) long, 3/4" (19mm) diameter, 1/2"-28 tpi. For .223 (5.56 NATO) caliber.

CAVALRY ARMS AR-15/M16 CAV COMPReduces Muzzle Rise & Recoil

#100-000-189AV .223 Cav Comp, 2K23N84 � � � � � � � � � � $ 32.99

Three equally-spaced horizontal prongs efficiently reduce muzzle flash to help minimize the blinding effect of the flash on the shooter in low-light conditions. Short OAL and flat, smooth muzzle face with rounded edges prevents hang-ups and aids in unencumbered weapon deployment. Precision machined from heat-treated steel and finished with AA’s proprietary SCARmor™ coating that gives high surface hard-ness for added resistance to blast erosion. Non-Mount models provides flash suppression only. 18T flash hider is an 18 tooth mount designed the for Advanced Armament’s first generation, fast attach silencers. Not compatible with the 51T ratchet mount or 90T ratchet mount taper silencers. 51T models have an integral 51-tooth ratchet mount that accepts Advanced Armament sound suppressors. 90T models have an integral 90-tooth ratchet mount that accepts Advanced Armament SR-5 and SR-7 silencers. All models are available in sizes to fit rifles chambered in 5.56mm/.223 (1/2"-28 tpi muzzle threads) or 7.62mm/.308 (5/8"-24 tpi muzzle threads). Choose model and caliber from table below. Installation Tool precisely fits the tines of all Blackout flash hiders for easy, smooth, secure installation without risk of damaging the tines. Accepts any 3/8" torque wrench. abSPECS: 17-4 stainless steel, SCARmor finish, matte black. Non-Mount 5.56 - 21/8" (5.4cm) long. 7/8" (2.2cm) O.D. 2.9 oz. (82g) wt. Non-Mount 7.62 - 29/32" (5.7cm) long x 7/8" O.D. 2.6 oz. (74g) wt. 18T/51T/90T - 21/2" long, 7/8" O.D. 4.3 oz. (123.3g) approx. wt.

ADVANCED ARMAMENT CORP. AR-15/M16/AR-STYLE .308

BLACKOUT FLASH HIDERS & MUZZLE BRAKESEfficient Flash Suppression; Models Available That Accept AAC Sound Suppressors

Non-Mount

STOCK # MODEL CALIBER THREAD PITCH ACCEPTS SUPP. PRICE#276-000-010AV Non-Mount Hider 5.56/.223 1/2"-28 No 6G43M39 $ 53.99#276-000-026AV 18T 5.56 Hider 5.56/.223 1/2"-28 Yes 6G85N54 $ 89.99#276-000-013AV 51T 5.56 Hider 5.56/.223 1/2"-28 Yes 6G83C33 $ 91.99#276-000-022AV 51T 5.56 Brake 5.56/.223 1/2"-28 Yes 6G125I54 $ 136.99#276-000-046AV 90T T 5.56 Hider 5.56/.223 1/2"-28 SR-5/SR-7 only 6G111I98 $ 118.99#276-000-016AV Non-Mount Hider 7.62/.308 5/8"-24 No 6G48J04 $ 51.99#276-000-027AV 18T 7.62 Hider 7.62/.308 5/8"-24 Yes 6G85D54 $ 89.99#276-000-014AV 51T 7.62 Hider 7.62/.308 5/8"-24 Yes 6G80G61 $ 99.99#276-000-023AV 51T 7.62 Brake* 7.62/.308 5/8"-24 Yes 6G123D74 $ 145.99#276-000-047AV 90T 7.62 Hider 7.62/.308 5/8"-24 SR-7 Only 6G97E71 $ 119.99#276-000-049AV 90T 7.62 Brake* 7.62/.308 5/8"-24 Yes 6G141A60 $ 166.99

#276-000-024AV Blackout Flash Hider Installation Tool, 6G29G72 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 34.99

51T 7.62 Hider

*NOT for use on FN SCAR 17 or Ruger® Gunsite Scout Rifle.

The Hellfire 2P Muzzle Brake main-tains shooter comfort while offering su-perb reduction of felt recoil. Optimized for 20" or shorter barrel lengths, the 2P has slightly rearward facing ports to re-duce recoil, while their proprietary design controls muzzle rise without the need for top ports. Extremely easy to install, brake

will not turn as you torque the collar to lock, and requires no tools to time the brake. Simple round knurled nut that requires no tools to time the brake. Return to zero is excellent. This means removal of your brake and re-installation will not require a zero change. Simply torque the universal adapter onto your barrel with a 5/8" wrench, this piece never has to come off. Next, LEFT HAND thread the brake/collar assembly onto the adapter until it is almost snug. Now rotate the brake until it is level, push the brake into the adapter and you will feel it lock onto the taper. Now tighten the collar fully by hand, and you are done! Made from heat treated 17-4PH stainless steel, with black Nitride finish, the brake has a 1" OD and a 1.1" OD collar that meets 3-Gun standard for limited class. Adapters allow you to quickly and easily swap Hellfire brakes between multiple guns. Built with a tapered surface that allows for precise alignment. Available for 5/8"-24 or 1/2"-28 TPI threaded muzzles. ab

AREA 419 AR-15/M16

HELLFIRE 2P MUZZLE BRAKE

#100-032-683AV .223/5.56/6mm Hellfire Muzzle Brake, 6Z00JJB � � � � � � � � � � � � � � � � � � � $ 140.00

#100-032-684AV 6.5mm/7.62/.308 Hellfire Muzzle Brake, 6Z00DGN � � � � � � � � � � � � � � � � � 140.00

#100-029-557AV 1/2"-28 Hellfire Adapter, 6Z00NFS � � � 50.00#100-029-556AV 5/8"-28 Hellfire Adapter, 6Z00JPB � � � 50.00#100-029-564AV Hellfire Taper & Thread Protector,

6Z00JEQ � � � � � � � � � � � � � � � � � � � � � � � � � 30.00

Counteracts Muzzle Rise, Tames Felt Recoil & Easy To Interchange Between Rifles

The D249F is one of the most effective flash hiders available. According to a formal U.S. Army evaluation, it eliminates 96% of all visible muzzle flash - the highest score achieved by any hider dur-ing the testing. The benefit is the elimination of momentary night blindness and flash distortion of night vision devices, allowing you to fully maintain target awareness during a night engagement. Fits 5.56/.223 rifles with ½-28" tpi muzzle threads. Weighs only 2.5 oz. 2.75" long x .865" O.D. NSN #1005-01-526-3464. ab

B.E. MEYERS & CO. AR-15/M16

D249F FLASH HIDEREliminated 96% of Muzzle

Flash in U.S. Army Tests

#100-019-750AV D249F Flash Hider, 5.56/.223, 7B90Q45 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 94.99

The Gunfighter compensa-tor reduces muzzle rise and flash, with a special baffling system that also limits side blast and the noise associated with typical compen-sators. Exterior dimensioned to accept blank firing adapter or flash hider mounted suppressors. Stainless steel construction and black oxide finish help resist heat and corrosion. Gunsmith installation recommended. Standard Length fits .223/5.56mm rifles. Extended Length models for both .223/5.56 and .308/7.62mm rifles brings 14.5" barrels up to 16", with a pre-drilled hole that allows permanent pinned attachment. abSPECS: Stainless steel, oxide finish, matte black. .830" (2.1cm) O.D. Wash-er included. Standard – 1.7" (4.4cm) long, with ½"-28 threads. Extended – 2.1" (5.5cm) long, with ½"-28 (.223/5.56) or 5/8"-24 threads (.308/7.62).


GUNFIGHTER COMPENSATORCompensator Reduces Side Blast & Accepts Suppressors

#100-011-242AV 5.56 Gunfighter Comp, Std Length, 1E85C97 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99

#100-011-248AV 5.56 Gunfighter Comp, Ext. Length, 1E90J82 � � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99

#100-014-858AV 7.62 Gunfighter Comp, Ext. Length, 1E95F59 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

Five longitudinal slots ef-fectively reduce muzzle flash to a minimum. Stainless steel con-struction and a salt bath nitride finish virtually eliminates the risk of corrosion caused by blast erosion. Bottom is solid to prevent dust signature while shooting in prone position. Machined flats enable installation with a standard wrench. Comes with crush washer. abSPECS: Machined 17-4 stainless steel, nitride finish, matte black. 2.2" (58mm) long x .86" (21mm) O.D. 2.2 oz. (79g) wt. 1/2"-28 tpi muzzle threads. Fits .223/5.56 caliber rifles.

Powerful Flash Reduction, Plus Extreme Resistance To

Corrosion

#100-009-929AV .223/5.56 Flash Suppressor, 8K120C89 � � � � � � � � � � � � � � � � � � � � � � � � $ 123.99


FLASH SUPPRESSOR

Three large baffles with six side ports and no top vents direct muzzle gases to the side, away from the shooter. Effectively coun-ters muzzle rise and recoil, minimizes felt muzzle blast. High volume shooters will appreciate reduced noise and ease of cleaning. Solid bottom minimizes dust printing when shooting prone. Easy instal-lation, secured with the supplied lock-nut. Designed and used by Jerry Miculek. abSPECS: Steel, Parkerized finish. AR-15 Comp - 2" (5cm) long, .925" (23.5mm) dia. 1/2"-28 tpi. AR-308 Comp - 2 3/8" (6.0cm) long, .925" (23.5mm) dia. 5/8"-24tpi.

DPMS AR-15/AR-STYLE .308

MICULEK COMPSix-Port Design Directs Blast

Away From Shooter

#231-000-038AV AR-15 Miculek Comp, 3B32E26 � � � � � $ 38.99#231-000-369AV AR-308 Miculek Comp , 3B52L79 � � � � 56.99

Machined steel, five-port flash sup-pressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when shooting prone. abSPECS: Machined steel, matte black. 13/4" (4.4cm) long, 7/8" (2.2cm) O.D. 1/2"-28 tpi. Requires peel washer (not included) for proper indexing.

DPMS AR-15 A2 FLASH SUPPRESSOR

#231-000-198AV AR-15 A2 Flash Suppressor, 1C7E77 � � � � $ 9.19

Reduces Muzzle Flash; Dissipates Gas

AR

-15/M

16C

OM

PS/FL

ASH

HID

ER

S


brownells.com

AR

-15

/M16


SINCE 1939

CO

MP

S/FL

ASH

HID

ER

S

The FM Products 9mm Muzzle Brake is the perfect device to stay on target with your favorite pistol caliber carbine. This 9mm Muzzle Brake is right at home on

any competition or other 9mm carbine where the minimum amount of muzzle flip and recoil impulse is desired. Machined from steel & finished with a matte black finish, this muzzle device will look good on any AR15 9mm barrel. ½-36 tpi threads. Does not include crush washer or shims. California compliant. ab

FM PRODUCTS AR-15

9MM MUZZLE BRAKETames Muzzle Rise of Your Short-

Barreled Pistol-Caliber AR-15

#100-026-236AV 9mm AR-15 Muzzle Brake, 6D18D52 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 19.50

Dual, curved restrictor plates with a tremendous amount of surface area stop exiting barrel gases and pull the barrel for-ward to counteract recoil and muzzle flip. The front sight or scope stays right on target for a faster second shot, plus less felt recoil and shooter fatigue. Models available for rifles chambered in .223/5.56mm and .308/7.62mm. abSPECS: Steel, blued, matte finish. 11/2" (3.8cm) dia., 21/4" (5.7cm) long. .223 - 5.3 oz. (149g) wt. Fits 1/2"-28 tpi muzzle threads. .281" exit hole accommo-dates bores up to .243/6mm without modification; may be enlarged for bores up to .358". .308 - 4.8 oz. (136g) wt. Fits 5/8"-24 tpi muzzle threads. .350" exit hole may be enlarged to fit bores up to .416".


RECOIL ELIMINATORWipes Out Recoil & Muzzle Lift

#452-015-120AV .223 Recoil Eliminator, 2E90K05� � � � � $ 94.99#452-000-066AV .308 Recoil Eliminator, 2E90M05 � � � � 94.99

The LANTAC Dragon Muzzle Brake has vertical ports in the primary dis-charge chamber to counteract muzzle rise, while the Short Energy Pulse system

decreases recoil length, preventing “stacking” of repeating shot en-ergy and enabling fast, accurate follow-up shots. Even with fully au-tomatic fire, the Dragon delivers significant reduced recoil and muz-zle climb, so more shots land on target. Machined from ultra-hard steel, the Dragon is virtually impervious to heat, corrosion and wear. Flats on the side allow you to install it with any standard wrench. Includes crush washer for secure fit and proper indexing. abSPECS: Carbon steel, nitride finish, black. Approx. 2.6" (6.6cm) long, .866" (22mm) O.D. .223 fits rifles chambered in .223/5.56mm NATO with 1/2"-28 tpi muzzle threads. .308 fits .308/7.62mm NATO rifles with 5/8"-24 tpi muzzle threads.

Enhances Muzzle Control & Reduces Felt Recoil

#100-013-596AV .223 Dragon Muzzle Brake, 6D114F38 � � � � � � � � � � � � � � � � � � � � � � � � $ 128.99

#100-015-462AV .308 Dragon Muzzle Brake, 6D125N98 � � � � � � � � � � � � � � � � � � � � � � � � 143.99

LANTAC AR-15/M16/AR-STYLE .308

DRAGON MUZZLE BRAKE

Unique design redirects concus-sion forward to provide better flash suppression than standard A2 sup-

pressor on short-barreled rifles and other centerfire gas-operated weapons. Virtually eliminates side blast to protect nearby person-nel during CQB, building entries, and when shooting from inside vehicles. Lessens felt recoil and reduces muzzle rise to help keep sights on the target for fast follow up shots and superior recoil man-agement on full-auto assault rifles, especially with barrels 13" or shorter. High-carbon steel with matte black manganese phosphate finish stands up to the heat and pressure of thousands of rounds. Convenient, 3/4" wrench flats allow easy installation with the same wrench used to remove factory flash suppressor. Crush washer in-cluded. Each unit individually serial numbered for quality control. abSPECS: Heat-treated steel, phosphate finish, matte black. 31/4" (8.2cm) O.A.L. 13/8" (3.5cm) diameter. 6.7 oz. (190g) weight. AR-15/M16/M4 fits rifles in 5.56mm/.223 with 1/2"-28 tpi muzzle threads. AR-308 fits rifles in 7.62mm/.308, and bolt-action rifles chambered up to .338 caliber with 5/8"-24 tpi muzzle threads.

NOVESKE AR-15/M16/AR-STYLE .308

KX3 FLASH SUPPRESSORReduces Muzzle Flash & Protects Nearby Personnel From Side Blast

#100-003-335AV KX3 Flash Suppressor, AR-15/M16/M4, 1A134B99 � � � � � � � � � � � � � � � � � � � � $ 134.99

#100-009-319AV KX3 Flash Suppressor, AR-308, 1A130G64 � � � � � � � � � � � � � � � � � � � � � � � � 133.99

Low-profile muzzle brake effectively suppresses flash, tames recoil, and is threaded to serve as an attachment device for OPS sound suppressors. Redirects muzzle blast laterally and slightly upward to reduce felt recoil and reduce muzzle flip to help you get back on target fast for followup shots. .308 model accepts Ops 12th Model Suppressor; .223 accepts all Ops suppressors except 3rd Model. abSPECS: Carbon steel, oxide coated, matte black. Approx. 2.1" OAL. .223 fits ½"-28 tpi muzzle threads; comes with crush washer, thread protec-tor, and barrel sleeve. .308 fits 5/8"-24 tpi muzzle threads; comes with thread protector.

Reduces Felt Recoil; Suppressor Ready

#504-000-017AV .223 Threaded Muzzle Brake, 4K177G06 � � � � � � � � � � � � � � � � � � � � � � � � $ 191.99

#504-000-018AV .308 Threaded Muzzle Brake, 4K170L76 � � � � � � � � � � � � � � � � � � � � � � � � � 189.99

OPS INC. AR-15/M16/AR-STYLE .308

MUZZLE BRAKE

“Enhanced Flash Arresting Brake” (EFAB) hybrid flash suppres-sor/muzzle brake combines maxi-mum recoil reduction and minimum concussion with powerful flash suppression. An array of diverging expansion nozzles both cool combustive gases and diffuses them away from the shooter. Effective on barrels as short as 10", so the EFAB is ideal for carbines, SBRs, and pistols. The closed bottom helps reduce dust signature when shooting prone. Includes a pilot hole for permanent pinning on 14.5" barrels to bring them to legal civilian length. abSPECS: Machined stainless steel, IonBond® CrCN finish, matte black. 2.47" (6.27cm) long, .9" (2.3cm) O.D. 3.5 oz. (99g) wt. 1/2-28 threads. For .223/5.56mm caliber rifles. Caution: Do not use crush washers. Requires Precision Armament Accu-Washer™ Muzzle Alignment System, sold separately, for installation.

PRECISION ARMAMENT

EFAB HYBRID FLASH HIDER/BRAKESuperior Muzzle Control & Effective Flash Suppression

#100-015-978AV EFAB Hybrid Flash Hider/Muzzle Brake, 2D134K00 � � � � � � � � � � � � � � � � � $ 157.99

#100-009-793AV 1/2" x 28 Accu-Washer Alignment System, 2D21E31 � � � � � � � � � � � � � � � � � 25.99

Compensator features a large initial expansion chamber which dissipates combustion gases at a lower pressure, then directs the gases to the side and rear through precisely canted vents. In-novative reverse venting design reduces recoil and blowback while eliminating muzzle rise. Closed bottom in compen-

sator greatly diminishes dust signature. Machined from high strength stainless steel for corrosion resistance, compensator will not erode due to the extreme heat of automatic fire. Fits .223/5.56mm AR-15 rifles with 1/2-28 muzzle threads. Accepts muzzle devices designed to fit over standard A2 flash suppressor. Available in Ionbond® DLC matte black finish or stainless steel in-the-white, satin finish. abSPECS: HTSR 416 stainless steel bar stock, matte black or in-the-white stainless steel finish. AR-15 - 1/2"-28 tpi threads. 2.25" (5.2cm) OAL. 0.875" (22mm) O.D. AR-308 - 5/8"-24 tpi threads. 2.28" (5.8cm) OAL. .986" (25mm) O.D.

Reduces Recoil & Withstands Heat From Automatic Fire

#100-013-093AV M4-72 AR-15 Comp, DLC Blk, 2D69B66 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 87.99

#100-013-197AV M4-72 AR-15 Comp, Silver, 2D76E78 � � 92.99#100-018-057AV AR-308 M4-72 Comp, DLC Blk,

2D95P10 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99#100-018-058AV AR-308 M4-72 Comp, Silver, 2D95B10 � � 99.99

PRECISION ARMAMENT AR-15/M16

M4-72 SEVERE-DUTY COMPENSATOR

Heavy-duty AR-308 muzzle brake ma-chined from solid stainless steel billet has large internal baffles for maximum recoil management, so you can get the sights back on the target quickly. Threads and bore aperture are machined in a single op-eration to ensure perfect alignment. M11 is optimized for tactical situations requiring minimal dust signature. Large blast baffles

redirect gases to the sides and upward to reduce recoil and keep the muzzle down. Wrench flats on top and bottom enable easy installa-tion and removal. M41 is designed for long-range precision tactical or target rifles. Angled ports vent gases counter-clockwise to coun-teract recoil produced by heavy bullets and fast twist rates. Features 3/16" spanner wrench holes for easy installation and removal. abSPECS: Machined HTSR 416 stainless steel, hardened to Rc 26-32, low-luster natural silver or matte black IonBond® DLC finish. 5/8"-24 tpi threads. Both models available for rifles chambered in .308/7.62mm or .338. M11 - 2.675" (6.8cm) long. 1.375" (3.5cm) wide, 1.188" (3cm) high. 5.6 oz.(158g) wt. M41 – 2.75" (7cm) long. 1.312" (3.3cm) maximum O.D., .925" (2.3cm) O.D. at barrel. 5.3 oz. (150g) wt.

PRECISION ARMAMENT AR-STYLE .308

SEVERE-DUTY MUZZLE BRAKEMaximum Recoil Control Helps You

Quickly Reacquire The Target

M11

#100-010-538AV .308 M11 Muzzle Brake, Blk, 2D103J43 � � � � � � � � � � � � � � � � � � � � � � � � �$ 128.99

#100-011-352AV .308 M11 Muzzle Brake, Silver, 2D93B84 � � � � � � � � � � � � � � � � � � � � � � � � � � 107.99

#100-014-635AV .338 M11 Muzzle Brake, Blk, 2D114G12 � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-022-957AV 6.5mm/.260 M11 Muzzle Brake, Black, 2D107Q31 � � � � � � � � � � � � � � � � � � � 113.99

#100-014-636AV .338 M41 Muzzle Brake, Blk, 2D114F12 � � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

#100-010-539AV .308 M41 Muzzle Brake, Blk, 2D100E51 � � � � � � � � � � � � � � � � � � � � � � � � � 125.99

#100-011-977AV .308 M41 Muzzle Brake, Silver, 2D93K84 � � � � � � � � � � � � � � � � � � � � � � � � � � 115.99

M41

The M11-SPR (Special Purpose Ri-fle) is a compact, lightweight version of the M11 brake designed specifically for precision-shooting .223/5.56-cham-bered AR-15 rifles and long-range hunting rifles. Large, symmetrical blast baffle with compensated forward baffles provides unprecedented muzzle control and recoil management while keeping induced bullet yaw to a minimum for improved long range accuracy. Wrench flats for easy installation and removal. Bore may be enlarged up to .338 caliber by a qualified gunsmith. abSPECS: Precision machined from HTSR 416 stainless steel barstock, heat-treated to Rc 26-32, with natural silver (SS) finish or matte black IonBond® (BLK) finish. 2.225" long x 1.125" wide x .990" high. .750" O.D. at barrel. Fits .223/5.56mm rifles with 1/2"-28 muzzle threads.

PRECISION ARMAMENT

M11-SPR MUZZLE BRAKEOutstanding Muzzle/Recoil Control

For .223/5.56 Rifles

#100-014-396AV M11-SPR Muzzle Brake, Blk, 2D99J86 � � � � � � � � � � � � � � � � � � � � � � � � � $ 104.99

#100-014-397AV M11-SPR Muzzle Brake, SS, 2D99M86 � � � � � � � � � � � � � � � � � � � � � � � � 104.99

Advanced Flash Arresting Brake fits onto standard 1/2"-28 threads and serves double-duty as a high-performance flash hider

and a compensator. Specially designed matrix of tiny passageways both diffuse and cool gases while reducing flash and concussion. Closed bottom section reduces dust signature when shooting prone. Ionbond® finish is highly resistant to heat, wear, and corro-sion. Includes a pre-drilled hole that enables pinning to bring 14.5" barrels to up to ATF-legal 16" length. abSPECS: 400-series stainless steel, Ionbond finish, matte black. 2.2" (5.5cm) long, .865" (2.1cm) O.D. Fits 223/5.56 rifles with 1/2"-28 tpi muzzle threads. Requires Precision Armament Accu-WasherTM Muzzle Align-ment System, sold separately.

PRECISION ARMAMENT AR-15/M16

AFAB-556 HYBRID MUZZLE BRAKEDual-Duty Muzzle Device For

Compact Tactical Rifles

#100-014-080AV AFAB-Mini Flash Hider/Compensator, 2D104F59 � � � � � � � � � � $ 109.99

Muzzle devices mount to threaded barrels to prep your rifle

to accept the modular Saker sound suppressor system. They also serve as standalone devices for flash suppression or recoil reduc-tion. When used with the Saker silencer, they enable fast, one-hand installation and removal of the Saker - no buttons or levers required - plus repeatable indexing. Three prongs of different lengths to help eliminate the ringing, or “tuning fork” sound commonly produced by conventional hiders. Effective on barrels as short as 8". abSPECS: Machined 17-4 stainless steel, hard Nitrided finish, matte black. 2½" (6.35cm) OAL.

SILENCERCO AR-15/M16/AR-308

SAKER™ TRIFECTA FLASH SUPPRESSORImpressive Flash Suppression;

Compatible With Saker Silencer

#100-015-258AV 5.56/.223 Flash Hider, ½"-28 threads, 7H00LUH � � � � � � � � � � � � � � � � � � � � � � � � � � $ 74.00

#100-015-259AV 7.62/.308 Flash Hider, 5/8"-24 threads, 7H00QWB � � � � � � � � � � � � � � � � � � � � � � � � � 74.00

AR

-15/M

16


brownells.com

CO

MP

S/FLA

SH H

IDE

RS

Aggressive, scallop-type cuts de-liver superior gas dispersion to help stabilize the muzzle during periods of sustained fire. Special internal blast chamber with side-facing ports helps reduce recoil with no adverse effect on gas system function. Also provides enough flash suppression to keep flash out of the shooter’s line of sight. Wrench flats directly over the internal threads ease installation. Peel washer included for precise in-dexing of the side ports. FSC30 fits rifles chambered in .308/7.62mm. CQB556 is designed primarily for entry teams and other operators working in confined spaces like buildings. Directs the entire force of the muzzle blast forward to protect the shooter and team members next to him from hot gasses and concussion. Also helps suppress muzzle flash and provides some recoil compensation. abSPECS: Steel, black, matte finish. Includes peel washer. All models fit AR-15/M16/M4/AR-308 and clones. .223/5.56mm fit rifles with with 1/2"-28 tpi RH muzzle threads. FSC30 - 3" (7.6cm) long x .925" (23.4mm) O.D. Fits .308/7.62 rifles with 5/8"-24 tpi muzzle threads. CQB556 – 23/4" (7cm) long x 13/8" (3.5cm) O.D. 9.1 oz. (258g) wt.

PRIMARY WEAPONS SYSTEMS AR-15/M16/AR-STYLE .308

TACTICAL COMPENSATORSTames Muzzle Jump For Improved Weapon Control During Rapid Fire

#100-011-530AV FSC30 Compensator, 4B88J36 � � � � � � �$ 94.95#100-004-609AV CQB556 Compensator, 4B78N77 � � � � � 95.99

FSC30

CQB556

Sturdily constructed of hardened 303-stainless steel and outfit-ted with ball-dimpled ports to dissipate gasses, shooters will notice a reduction in felt recoil and muzzle climb; resulting in faster, more reliable follow-up shots. Melonite finish resists corrosion and sim-plifies cleaning. When pinned and welded in place on a 14.5" barrel, will make the barrel legal length. abSPECS: Stainless steel, black Melonite finish. Fits .223/5.56mm caliber rifles. ½-28" tpi. 2¼" (6.1 cm) long x .816" O.D. Includes crush washer and pin for permanent attachment.

Reduces Recoil Impulse & Muzzle Climb

#100-009-232AV Extreme 5.56 Muzzle Device, 3B76Q51 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 80.99

SPIKES TACTICAL AR-15/M16

DYNACOMP EXTREME MUZZLE DEVICE

Easy to install muzzle brakes substan-tially reduce felt recoil and muzzle rise for more comfortable shooting, better con-trol, and faster follow-up shots. Recessed gas ports redirect combustion gases to counteract recoil force. Machined from the same high-grade 8620 steel bar stock as the popular Smith Enterprise Vortex Flash Eliminator series, and heat-treated to a surface hardness of Rc 60 to resist gas erosion. Rounded edges give a streamlined profile and minimize risk of snag-ging on other gear. 1002-RR fits 6.5/6.8/.308/7.62 rifles with 5/8"-24 tpi muzzle threads. Includes lock nut for secure installation. 1005-SS fits any rifle up to .308/7.62mm with 5/8"-24 tpi muzzle threads and also accepts Direct Connect suppressors. Includes lock nut. abSPECS: 8620 carbon steel (CS), salt-bath nitrated finish, matte black. 1002RR – 2" long, .905" (23mm) O.D. 1005-SS – 27/8" (7.3cm) long, .860 O.D.

Reduces Felt Recoil, Improves Control

#851-000-086AV 1002RR Muzzle Brake, CS, 1E78I78 � � $ 92.99#851-000-083AV 1005-SS Muzzle Brake, CS, 1E85N32 � 97.99

1005-SS

1002RR

SMITH ENTERPRISE AR-15/M16 /AR-STYLE .308

“GOOD IRON” MUZZLE BRAKES

Four, specially angled flutes hide nearly 100% of muzzle flash, even during full-auto fire, by dissipating gas and retaining unburned powder for increased residual burn. Constructed of the same 8620 bar stock steel used in the manufacture of AR-15/M16 bolts and car-riers, then heat-treated to provide a high-strength core and tough, outer shell. Special, helix design helps align exiting barrel gas to improve accuracy with all bullet types. ab

AR-15/M16 G6-A2/G6-A3 VORTEX - Skirt extension conceals gap between barrel shoulder and flash hider on AR-15, M16, and M4 rifles. Grooved base ring allows integration of Blank Firing Attachment (BFA) used by law enforcement trainers, and per-mits installation of the Smith Enterprise M4DC CQB sound and flash suppressor (available factory direct to USG/LE and FMS customers). Thread-on design requires no washer. Torque to 10 ft. lbs. maximum, self-tightens as weapon is fired. Use M-193, SS-109 (M855), and MK 262 service ammo for highest degree of flash suppression. Can be permanently attached to 14.5" long, M4 barrels for an overall length of 16.1". G6-A2 has smooth exterior. G6-A3 model adds helical grooves on the outer surface that help minimize carbon buildup between the Vortex and the M4DC, making installation and removal of the suppressor is easier.SPECS: 8620 steel, Parkerized, black, matte finish.1/2"-28 tpi. 2.31" (5.9cm) long, .858" (22mm) dia. 3.1 oz. (88 g) weight. Fits AR-15, M16, and M4.#851-000-047AV AR-15/M16 G6-A2 Vortex, 1E54C08 � �$ 63.99#851-000-091AV AR-15/M16 G6-A3 Vortex, 1E53L68 � � � 61.99

.308 VORTEX - Streamlined unit re-duces muzzle flash with four, 15° heli-cal flutes. Provides Vortex technology for AR-style .308 and Remington 700 Tactical rifles. Grooved to accept a Smith Enterprise Direct Connect sound suppressor. Comes in standard 5/8"-24 thread pitch with .635" thread length so it will fit DPMS, Noveske, and other AR-style .308 rifles with the shorter thread spec. Also fits 6.8mm SPC rifles with these muzzle thread specs.SPECS: 8620 steel. Parkerized, black, matte finish. 5/8"-24 tpi. 3" (7.6cm) long, .905" dia., .635" thread length. 4.6 oz. (130g) weight. Fits AR-style .308 rifles from DPMS, Noveske, and others, as well as Savage 110 FCP bolt action. #851-000-084AV .308 Vortex, 5/8"-24 tpi x .635",

1E83E59 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 96.99

SMITH ENTERPRISE AR-15/M16/AR-STYLE .308

VORTEX FLASH ELIMINATORHelical Flutes Dissipate Gas, Hide Muzzle Flash

G6-A2

Makes your AR-15 carbine with a 16" barrel look like it has a sup-pressor without needing a tax stamp. Replaces standard A2 flash


CAR-1 FAKE SUPPRESSORGives Your Rifle The

Appearance Of A Suppressor But Does Not Reduce Sound

#100-008-583AV CAR-1 Fake Suppressor, 3B35K50 � � � $ 44.99

suppressor and gives the appearance of a 10.5" barrel with suppres-sor mounted. ½" x 28 threads allow fake suppressor to easily install onto many AR barrels. Enhance the tactical look and range appeal of your AR-15 carbine. abSPECS: Machined 6061 aluminum, anodized, matte black. 5.5" (13cm) long, 1.25" (32mm) O.D. 7 oz (198g) wt. Fits 16" barrel with carbine-length gas system, ½"-28 tpi threads and O.D of .720" or less behind threaded portion. Not a sound suppressor.

Thread-on muzzle devices give the tactical rifle shooter a variety of options for recoil reduction, flash suppression, or a combination of both to meet his exact needs. Precision CNC machined to exact tolerances from high-quality stainless steel alloy that withstands ex-treme heat and gas particle erosion, even after thousands of rounds. Stands up to the intense tempo of combat conditions without loss of performance. Easily replaces factory flash suppressor on military-configuration AR-15/M16/M4/AR-style .308 rifles with no perma-nent modifications to gun. Install on other assault rifles, semi-autos, and bolt actions with muzzle threaded to accept the device. Not only improves the performance and enhances the appearance of your rifle, but also provides a rock-solid mounting platform for Sure-Fire Fast-Attach® sound suppressors. SFMB and SF3P models accept SureFire SOCOM Series Fast-Attach® suppressors only, not earlier model Fast-Attach suppressors. Each kit includes a set of varying-thickness crush washers for proper indexing. abSPECS: Heat-treated stainless steel, matte black finish. Fits rifles with threaded muzzles only. Crush washer set, tube of Rocksett heat-resistant thread locker, and complete instructions included.

SUREFIRE AR-15/M16/AR-STYLE .308

MUZZLE BRAKES & FLASH SUPPRESSORSGet The Right Combination Of Recoil Control & Flash

Suppression

SFMB762SFMB68 SF3P762

MUZZLE BRAKES - Substantially reduces muzzle rise and provides outstanding felt recoil reduction for better shot follow-through, improved accuracy, and faster follow-up shots. Advanced Impulse Diffusion™ technology diffuses muzzle blast to the sides, virtually eliminating gas dispersion back to the shooter and minimizing felt concussion to help keep the sights firmly on the target.

FLASH SUPPRESSORS - Advanced design provides superior muzzle flash reduction to help conceal the shooter’s position and preserve night vision. Rugged stainless steel construction gives exceptional strength and durability, with a variety of styles to fit AR-type rifles and carbines in both 5.56/.223 and 7.62/.308, as well as other assault rifles, semi-autos, and bolt actions.

MUZZLE BRAKES

STOCK # MODEL FITS CALIBERTHREAD

SIZE LENGTH DIAMETERADDL BBL LENGTH PRICE

#152-000-134AV SFMB556/SOCOM M16/M4/Colt Commando; any ri-fle w/unobstructed barrel exterior .170" behind muzzle threads a O.D. less than .800"

5.56mm/.223 1/2-28 2.5" (6.4cm) .865" 1.4" (3.5cm) 6H149L00 $ 149.00

#152-000-135AV SFMB68/SOCOM 6.8mm rifles with 5/8-24 threads

6.8mm 5/8-24 2.5" (6.4cm) .865" 1.4" (3.5cm) 6H149H00 $ 149.00

#152-000-136AV SFMB762/SOCOM AR-Style .308, including ArmaLite® AR-10®, DPMS LR-308, and 7.62mm rifles

7.62mm/.308 5/8-24 2.5" (6.4cm) .865" 1.4" (3.5cm) 6H149C00 $ 149.00

FLASH SUPPRESSORS

STOCK # MODEL FITS CALIBERTHREAD

SIZE LENGTH DIAMETERADDL BBL LENGTH PRICE

#152-000-130AV SF3P556/SOCOM M4/M16 variants with ½-28 threads

5.56mm/.223 1/2-28 2.7" (6.7cm) .865" 1" (25mm) 6H129J00 $ 129.00

#152-000-131AV SF3P68/SOCOM 6.8mm firearms with 5⁄8-24 threads

6.8mm 5/8-24 2.7" (6.7cm) .990" 2.04" (51mm)

6H129B00 $ 129.00

#152-000-132AV SF3P762/SOCOM AR-style .308, includ-ing Armalite AR-10, DPMS LR-308, and 7.62mm rifles

7.62mm/.308 5/8-24 2.7" (6.7cm) .865" 1.1" (27mm) 6H129G00 $ 129.00

#152-000-133AV SF3P762M14x1LH AK-47 and 7.62mm firearms with M14x1 left-hand metric threads

7.62mm M14x1 left hand

2.8" (7cm) .990" 2.08" (52mm)

6H103N84 $ 129.99

Heavy duty compensator designed by noted custom gunsmith and 3-gun competitor Benny Hill employs a unique internal ex-pansion chamber that redirects some of the combustion gas out a topside gas port to virtually eliminate muzzle climb. The sights stay on the target, so you can make exceptionally fast follow up shots. Precision machined from a solid billet of high-grade stainless steel, with large side ports that vent more gas to help reduce felt recoil. Solid bottom prevents dust signature when shooting close to the ground. Perfect for USPSA and 3-gun competition where seconds count, and for varmint hunters who want the sight to stay the target when they take a shot. abSPECS: Stainless steel, natural finish. For use on .223/5.56mm rifles with 1/2"-28 tpi muzzle threads.

TRIANGLE SHOOTING SPORTS AR-15/M16/

AR-STYLE .308 BENNY HILL “ROLLING THUNDER” COMPENSATOR

Eliminates Muzzle Rise; Sight Stays On Target For Fast Follow

Up Shots

#100-003-689AV .223 Rolling Thunder Comp, 3Z88H29 � � $ 109.99

AR

-15

/M16


SINCE 1939

CO

MP

S/FL

ASH

HID

ER

S

Muzzle brake helps you stay on target by venting gases up-ward to counteract muzzle rise for fast follow-up shots. Improves control and accuracy during full-auto fire. Specifically designed to enhance your CQB effectiveness with aggressive, diamond-shaped teeth that provide effective less-lethal muzzle strikes during hand-to-hand combat. Wide strike face lessens danger of a penetrative wound on contact. Also serves as a stand-off device for body con-tact shots. Accepts most over-the-barrel sound suppressors and actually increases their effectiveness. abSPECS: 8620 carbon steel, Parkerized, matte black finish. .860" (2.2cm) O.D., 21/2" (6.4cm) long. 3.1 oz. (81g) wt. Fits barrels with 1/2"-28 tpi right-hand threads.


MEDIEVAL MUZZLE BRAKEGives Effective Recoil Reduction & Aids In

Hand-To-Hand Combat

#100-003-441AV Medieval Muzzle Brake, 3B43H04 � � � $ 44.99

Compact brake is designed to direct both blast and noise forward, away from the shoot-er, to effectively dampen recoil for better control. Brake gives an extremely low dust signa-

ture and features a recessed crown with a raised saw tooth rim that allows secondary use as a breeching device. Humorously inscribed with “Point Toward Enemy” and large arrow. abSPECS: Hardened 4140 steel, Parkerized, matte black. 2.25" long, .970" O.D. Threads: 5.56/223 - 1/2" -28 tpi; 7.62/.308/6.8 - 5/8" -24 tpi. Crush washer included.

TROY INDUSTRIES AR-15/M16/AR-STYLE .308

CLAYMORE MUZZLE BRAKEEnhances Control By

Directing Blast & Noise Away From Shooter

#100-008-088AV 5.56/.223 Claymore Brake, 3B58A08 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 59.99

#100-008-089AV 7.62/.308/6.8 Claymore Brake, 3B58J08 � � � � � � � � � � � � � � � � � � � � � � � � � � 64.99

An incredible maze of gas dispersing holes limits muzzle rise with no increase in muzzle blast. Multiple venturi expan-

sion chambers disperse and redirect gases for effective recoil con-trol, while limiting blast effects. Unique design features attenuating holes that are both horizontal and perpendicular to the centerline of the bore to disperse gas and sound equally to all sides. Available in steel with Parkerized finish or stainless steel with matte finish. abSPECS: Stressproof® steel, manganese phosphate Parkerized finish, matte black, or 416 stainless steel, matte finish. 2" (5.8cm) long x 3/4 (19mm) O.D., 1/2"-28 tpi thread. 1.6 oz. (46 g) wt. Fits .223/5.56mm caliber rifles.

VAIS AR-15/M16

MUZZLE BRAKESuperior Recoil Control & Muzzle Blast Reduction

#927-000-028AV Steel Muzzle Brake, 7B134J10 � � � � � � $ 144.95#927-000-027AV SS Muzzle Brake, 7B142G85� � � � � � � � 154.95

This muzzle brake features offset porting that reduces both felt recoil and muzzle rise, help-ing the shooter to get back on target faster between shots. Surefire's unique "Impulse Dif-

fusion" design minimizes side blast and rear-directed concussion, making the Procomp more comfortable to shoot. Blind pilot holes at the 3 and 9 o'clock positions permit fine-tuning of recoil to indi-vidual shooting styles or ammunition. Installation requires no per-manent modifications to the firearm. abSPECS: Machined, mill-certified barstock steel, Melonite finish, black. 2.5" (6.3cm) long. 3.4 oz. (97g) wt. Fits .223/5.56mm caliber rifles with 1/2"-28 muzzle threads.

SUREFIRE AR-15/M16

PROCOMP MUZZLE BRAKESubdues Recoil & Muzzle Lift

For Fast Follow Up Shots

#152-000-142AV PROCOMP Muzzle Brake 5.56, 6H51I90 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 53.10

The Gamma is a muzzle brake/com-pensator hybrid, so it helps you stay on target during rapid fire. Unique internal chamber geometry virtually eliminates felt recoil and minimizes muzzle movement, letting you saturate the target no matter how fast you shoot, so you can make fast,

accurate follow-up shots. Muzzle brake portion consists of two chambers, with one larger than the other, causing the escaping gases to drive the rifle forward, counteract-ing recoil. Slots on top vent gases upward and force the muzzle down, thus dramati-cally reducing muzzle rise. Optimized for

10.5" to 18.5" barrel lengths, the Gamma will also work on SBRs and AR pistols, especially the 9mm version, which is optimized for pistol caliber carbines. 300BLK designed for pistols/carbines chambered in .300 AAC Blackout; it is shorter than the 762 model (1.72" vs. 2.21"). CAGE (Concussion Altering Gas Expansion) device works with the 5.56 and 300BLK Gammas to disrupt side concussion without hin-dering its recoil-reduction and muzzle control properties. abSPECS: 17-4 stainless steel, black Nitride (Blk) or bead-blasted natural sil-ver (SS) finish. Crush washer included. 556 fits ½"-28 threads; 6.5 Creed-moor (2.175" OAL), 300BLK (1.72" OAL) & 762 (2.21" OAL) fit 5/8"x24 threads; 9mm (.355") fits ½"-28 threads.

VG6 PRECISION AR-15/M16/AR-STYLE .308

GAMMA MUZZLE BRAKEHybrid Muzzle Device Dramatically Reduces Felt Recoil & Muzzle Rise

#100-019-275AV 5.56 Gamma Muzzle Brake, Blk, 3E57D32 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 63.99

#100-025-670AV 5.56 Gamma Muzzle Brake, SS, 3E56A45 � � � � � � � � � � � � � � � � � � � � � � � � � � 63.99

#100-024-582AV 556 Ext. Gamma Ext. Muzzle Brake, Blk, 3E56G02 � � � � � � � � � � � � � � � � � � � � � � 65.99

#100-025-668AV 556 Ext. Gamma Muzzle Brake, SS, 3E56J45 � � � � � � � � � � � � � � � � � � � � � � � � � � � 63.99

#100-024-584AV 6.5 Creedmoor Gamma Muzzle Brake, Blk, 3E68E24 � � � � � � � � � � � � � � � � � � � � � � 69.99

#100-025-665AV 6.5 Creedmoor Gamma Muzzle Brake, SS, 3E59J65 � � � � � � � � � � � � � � � � � � � � � � � 71.99

100-027-886AV 300BLK Gamma Muzzle Brake, Blk, 3E71P99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

#100-025-663AV 300BLK Gamma Muzzle Brake, SS, 3E71J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

#100-019-276AV 7.62 Gamma Muzzle Brake, Blk, 3E59I65 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

#100-025-667AV 7.62 Gamma Muzzle Brake, SS, 3E59I65 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

100-029-393AV 9mm Gamma Muzzle Brake, Blk, 3E59E20 � � � � � � � � � � � � � � � � � � � � � � � � � � 63.99

#100-024-587AV Cage Device for Gamma/Epsilon, 3E59J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99

5.56 Model

7.62 Model

CAGE Device

Items

Combining elements of a muzzle brake, compensator, and flash hider, the Epsilon brake employs a two-step gas redirection process to produce a soft, low-energy recoil that's easy on your shoulder and helps you keep the

sights on the target at all times. Three prongs substantially reduce flash signature, and with no ports at the 12 o’clock position, there is no distracting flash to get in your view of the target. Dual chambers redirect gas to reduce recoil; six valve holes on the underside release the fastest-moving gases from the chamber closest to the muzzle, further decreasing recoil. Comes with a pre-drilled hole for pinning to a 14.5" barrel. 556 model also accepts VG6's CAGE (Concussion Altering Gas Expansion), sold separately. abSPECS: 17-4PH stainless steel, Blacknitride™ (Blk) or bead-blasted natu-ral silver (SS) finish. Models for: .223/5.56mm rifles with ½"-28 threads (2.2" OAL, .9" O.D.), .308/7.62mm rifles with 5/8"-24 threads (2.84" OAL), 9mm/.355 pistols/carbines/SBRs with ½"-28 threads. 6.5 (2.84" OAL) fits rifles and carbines chambered in 6.5 Creedmoor, 6.5 Grendel and 6.8 Rem SPC with muzzle 5/8"-24 threads.

VG6 PRECISION AR-15

EPSILON MUZZLE BRAKECreates Low Energy Recoil for

Absolute Muzzle Control

#100-019-277AV 5.56 Epsilon Muzzle Brake, ½"-28/Blk, 3E57J32 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 63.99

#100-025-669AV 556 Epsilon Muzzle Brake, Silver, 3E58H05 � � � � � � � � � � � � � � � � � � � � � � � � � � � 67.99

100-031-180AV 6.5 Epsilon Muzzle Brake, 5/8"-24/Blk, 3E64P80 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

100-031-179AV 6.5 Epsilon Muzzle Brake, 5/8"-24/SS, 3E64P80 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

100-027-890AV 7.62 Epsilon Muzzle Brake, 5/8"-24/Blk, 3E71N99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

100-027-891AV 7.62 Epsilon Muzzle Brake, 5/8"-24/SS, 3E71M99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99

100-027-888AV 9mm Epsilon Muzzle Brake, ½"-28/Blk, 3E65F67� � � � � � � � � � � � � � � � � � � � � � � � 67.99

100-027-889AV 9mm Epsilon Muzzle Brake, ½"-28/SS, 3E65A67� � � � � � � � � � � � � � � � � � � � � � � � � � � � 67.99

Items

Highly-efficient internal helical de-sign uses ten precisely contoured longitudinal ports combined with a unique, cloverleaf-shaped exit port to trap unburned powder par-ticles long enough for full burn and dissipation of hot combustion gasses. Muzzle flash cancels itself out to minimize shooter exposure during daytime and low-light situations. Also serves as a compen-sator by directing venting gasses to help reduce muzzle jump and improve shooter control for better shot placement. Precision ma-chined from 4140 steel to stand up to rough tactical operations. 21/8" overall length brings a 141/2" barrel up to legal length for civilian use when flash suppressor is permanently pinned or welded in place. Accepts most sound suppressors and Blank Firing Attachments de-signed to fit a M16/M4 flash hider. VC-1 fits .223/5.56mm AR-15/M16/M4 rifles; VC-301 fits .308/7.62mm AR-style rifles. abSPECS: Steel, matte black Parkerized finish. 21/8" (5.4cm) long, .856" (2.2cm) O.D. Includes peel washer. VC-1 fits .223/5.56mm AR-15/M16/M4 rifles with 1/2"-28 tpi threaded muzzle. VC-301 fits AR-style .308/7.62mm rifles with 5/8"-24 tpi threaded muzzle.

VLTOR AR-15/M16/AR-STYLE .308

FLASH SUPPRESSOR/ COMPENSATOR

Dissipates Hot Gas To Minimize Muzzle Flash, Reduces Muzzle Jump

#100-003-114AV VC-1 Flash Hider/Comp, 3A56C34 � � � �$ 59.95#100-003-997AV VC-301 Flash Hider/Comp,

3A56J34� � � � � � � � � � � � � � � � � � � � � � � � � � � 59.95

VG6's Delta 5.56/.223 muzzle brake offers an exceptional level of control to the AR shooter, ensuring the muzzle stays level and on-target while simul-taneously dampening recoil. Machined from blast-resistant, hardened 17-4PH stainless steel and available with either a natural Silver or Black finish, this brake employs an optimized gas flow pattern developed through the use of com-putational fluid dynamics and computer-aided engineering. It's designed for optimum performance on shorter 10.5"-18.5" barrels. Standard 1/2"-28 tpi threads. 2.21" OAL. Crush washer included. ab

VG6 PRECISION

DELTA MUZZLE BRAKEComp/Brake Hybrids Deliver Impressive Muzzle Control

100-027-887AV 556 Epsilon Muzzle Brake, Black, 3E00GCK � � � � � � � � � � � � � � � � � � � � � � � � � � $ 43.99

#100-025-669AV 556 Epsilon Muzzle Brake, Silver, 3E58H05 � � � � � � � � � � � � � � � � � � � � � � � � � � 67.99

Item

State of the art, three-prong flash sup-pressor effectively dissipates combustion gas to suppress muzzle flash without sacrificing accuracy. External accurizing flutes im-prove muzzle harmonics to minimize blast signature and dissipate flash. Precision machined from 4140 steel bar stock and heat hard-ened for extra resistance to blast erosion, with a durable matte black Parkerized finish to match most factory barrel finishes abSPECS: 4140 steel, Parkerized, matte black finish. 2" (5.1cm) long, .865" (22mm) O.D. 2.4oz (68g). Fits rifles chambered in .223/5.56mm with 1/2"-28 tpi RH muzzle threads.

Effectively Suppresses Flash With No Loss Of Accuracy

#965-000-086AV Accu-Tac Flash Hider, 5F49K90 � � � � $ 51.99

WILSON COMBAT AR-15/M16

ACCU-TAC FLASH HIDER

The Q-Comp was designed by Wilson's compensator experts to give shooters a big boost in re-coil control during rapid fire with-out the harsh blast and flash of some other AR-15 muzzle devices. It's a hybrid brake/compensator tuned to minimize side-blast and concussion with almost zero muzzle flash, while retaining excel-lent vertical and rearward recoil reduction. The Q-Comp's slotted expansion chamber has no prongs or tines to break off or snag, and it's Melonite QPQ coated alloy steel construction ensures maximum durability and corrosion resistance. Includes crush washer. Three caliber/thread pitches to choose from: ½"-28 fits barrels with an internal bore diameter of .375". 5/8"-24 fits barrels wtih an internal bore diameter of .375", including most .308/7.62 rifles and some 9mm. 11/16"-24 fits barrels with an internal bore diameter of .485". ab


Q-COMP MUZZLE BRAKEPart Comp, Part Brake, Almost

No Muzzle Flash

#965-000-252AV 5.56/.223 Q-Comp, 1/2"-28, 5F56N37 � �$ 59.95#965-000-253AV .308/7.62 Q-Comp, 5/8"-24, 5F59N95 � � 59.95#965-000-254AV Q-Comp, 11/16"-24, 5F64F95 � � � � � � � � � � 64.95

FOLLOW US • FRIEND US • LIKE US


brownells.com

AR

-15/M

16

PHANTOM FLASH SUPPRESSOR - Longitudinal ports help mini-mize the blinding effects of muz-zle flash in low light for improved target acquisition during night operations. Screw-on design for threaded barrels only. Includes crush washer for proper timing of vents. Deeply serrated notches at the tip provide extra insurance in hand-to-hand combat. Integral rings at the base accept military sound suppressors and allow mounting of Blank Firing Attach-ments (BFAs) for training exercises. SPECS: Steel, mil-spec phosphate coating. For rifles chambered in .223/5.56 NATO with 1/2"-28 tpi muzzle threads. 21/4" (5.7cm) long. 7/8" (2.2cm) O.D.#100-002-070AV Phantom Flash Suppressor,

9A21K64 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 25.99

PHANTOM 5C1 COMP/FLASH SUPPRESSOR - Flat, non-serrated muzzle face helps prevent catch-ing or snagging muzzle tip during storage or deployment. Five, longi-tudinal vents help hide flash while dispersing gases up and outward; tames muzzle rise and keeps your front sights on target. Outward fac-ing ports and solid panel on bottom help eliminate dust signature when shooting in the prone position. Grooved, base rings accept training attachments and sound suppression devices for LE and military personnel. SPECS: Steel, mil-spec phosphate finish. 1/2"- 28 tpi. 21/4" (5.7cm) long, 7/8" (2.2cm) diameter. 2.1 oz. (60 g) wt. Includes crush washer. #100-002-859AV .223 5C1 Comp/Flash Suppressor,

9A23M30 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99

PHANTOM 5C2 COMP/FLASH SUPPRESSOR - Five, straight, longitudinal vents hide flash while dispersing gases up and outward to tame muzzle rise. No down-ward facing port helps eliminate dust signature when shooting in the prone position. Chisel-shaped front notches keep muzzle planted on your attacker during CQB situ-ations. For threaded barrels only, includes crush washer. .223 model has grooved base rings that accept training attachments and sound suppression devices for LE and military personnel. SPECS: Steel, mil-spec phosphate coating. .223 - 1/2"-28 tpi. 21/4" (5.7cm) long x 7/8" (2.2cm) O.D. 2.1 oz. (60g) wt. .308 - 5/8"-24 tpi. 215/16" (7.5cm) long. 1" (2.5cm) O.D. 4.5 oz. (127g) wt. #100-002-071AV .223 5C2 Comp/Flash Supp.,

9A23K28 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 27.99#100-003-229AV .308 5C2 Comp/Flash Supp.,

9A36P60 � � � � � � � � � � � � � � � � � � � � � � � � � � � 47.99

5/8" CRUSH WASHER - Precision machined steel washer ensures exact alignment of flash suppressors and other muzzle acces-sories that require a washer. Fits AR-style .308 rifles with 5/8" threaded muzzles.SPECS: Steel, blued. 5/8" (.625"/1.59cm) I.D. 13/16" (.813"/2.06cm) O.D.#100-003-123AV 5/8" Crush Washer, 9A3A49 � � � � � � � � � � � $ 4.89


PHANTOM MUZZLE ACCESSORIESDedicated Flash Suppressor Or Comp/Flash Suppressor Combo; Aggressive Front End Cuts For CQB Maneuvers

ab

ab

ab

ab

CO

MP

S/FLA

SH H

IDE

RS

QUESTIONS BEFORE YOU BUY — Ask Our Full-Time Tech Staff

TR

IGG

ER

S

BCM's PNT trigger and ham-mer are built to surpass mil-spec standards without compromising the reliability of the USGI trigger. Both trigger and hammer are heat-

treated in a three-step process that hardens them with optimal grain alignment. To create perfect alignment for a smooth pull, the trigger and hammer bores are precisely honed, and the trigger and hammer pins are centerless ground to a fine finish with exacting tolerances. The disconnector is stamped from 1070 steel alloy, fine blanked for clean edges and double disc ground to ensure consistent, reliable operation. Hand polished sear engagement surfaces reduce fric-tion by 300% beyond the GI-spec. A slick electroless nickel finish reduces creep and cleans up the grittiness commonly associated with an M16/M4 trigger. Teflon particles embedded in the nickel further reduce friction on a finish that is corrosion, rust and oxida-tion resistant. ab

BRAVO COMPANY

BCMGUNFIGHTER PNT TRIGGERMil-Spec Compatibility,

Durability & Reliability - Match-Grade Performance

#100-018-632AV PNT Trigger, 1E61F24 � � � � � � � � � � � � � � � �$ 65.95

Trigger/hammer kits feature rugged military-type compo-nents carefully prepped to give a smoother trigger pull while main-taining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s ac-customed to. The QMS (Quality Mil-Spec) set has the sear con-tact surface precision-honed to smooth and lighten the pull to around 61/2 lbs. The ACT (ALG Combat Trig-ger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs. Both kits also available with a DPMS Lower Parts Kit that includes all the internal parts you need to install a complete fire-control system with a QMS or ACT trigger. abSPECS: Hammer/trigger – 8620 steel. Disconnnector – 1070 high-carbon steel. Hammer/trigger pins – heat treated 4140 chrome-moly steel. Both kits contain trigger, trigger spring, hammer, hammer spring, disconnnec-tor, disconnnector spring, hammer and trigger pins, and instructions.

ALG DEFENSE AR-15 ENHANCED MILITARY-STYLE TRIGGERS

Gives A Smoother Pull While Preserving Reliability

Trigger Set with Parts Kit

#100-009-796AV QMS AR-15 Trigger Set, 8Z44N84 � � � $ 45.99#100-010-634AV QMS AR-15 Trigger Set w/Parts Kit,

8Z76G17 � � � � � � � � � � � � � � � � � � � � � � � � � � 90.99#100-009-797AV ACT AR-15 Trigger Set, 8Z70N99 � � � � 70.99#100-010-635AV ACT AR-15 Trigger Set w/Parts Kit,

8Z91G53 � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99

Self-contained trigger/assembly installs in minutes and delivers a light, smooth, match-grade trigger pull free of grittiness, with an ultra-crisp letoff and short reset. Sim-ply remove factory trigger and safety selec-tor, drop in the module, reinstall selector and pins, and you’re ready to shoot. Completely new engagement geometry produces a light 3-lb. pull and crisp release without compro-mising reliability or safety (pull weight and over-travel ARE adjustable). The two-stage design is adjustable for sear engagement, with a first-stage takeup of approximately 6 oz., followed by actual sear movement tak-ing up the rest of the weight—the reverse of the military two-stage AR trigger pull profile. Instead, the shooter can build force steadily, maintaining precise control and keeping his attention on the target. After release, reset travel is only .030", less than half the .070" typical of standard match triggers, to aid in fast, accurate follow-up shots. The sear captures the hammer at the back instead of near the pivot point to help produce the light pull and maintain safety. A second, independent, intercepting sear is positioned to block the hammer if it slips off the primary sear, as when the weapon is dropped or suffers hard impact. If the intercepting sear captures the hammer, pulling the trigger will still fire the rifle, though with a heavier pull weight. In addition, the Gold system uses the rifle’s factory safety to positively capture the hammer, like an M1 Garand, and roll it back below the primary sear for an extra margin of safety. A lightweight aluminum housing contains the entire system and maintains the correct toler-ances between the working parts. The receiver pins serve only to anchor the module in the receiver, with no effect on trigger function. Available with traditional Curved shoe or a Flat target shoe. abSPECS: Trigger/Hammer – Wire EDM cut S7 tool steel. Housing – Alumi-num, anodized, black. AR Gold fits any mil-spec AR-15 with .154" trigger and hammer pin holes. Will NOT fit rifles with Colt-type sear block. SR Gold fits ArmaLite® AR-10®, DPMS LR-308, Knight’s Armament SR-25, and similar AR-style .308 rifles with .154" trigger and hammer pin holes.

AMERICAN TRIGGER CORP AR-15/M16/AR-STYLE .308

GOLD TRIGGER MODULEDrop-In Fire Control System

Gives A Light, Safe, Match-Grade Pull

#100-004-262AV AR Gold Modular Trigger, Curved, 5A00JBS � � � � � � � � � � � � � � � � � � � � � � � � � $ 282.99

100-027-839AV AR Gold Modular Trigger, Flat, 5A279H95 � � � � � � � � � � � � � � � � � � � � � � � � 279.95

#100-004-933AV SR Gold .308 Modular Trigger, Curved, 5A261P68 � � � � � � � � � � � � � � � � 282.99

100-027-840AV SR Gold .308 Modular Trigger, Flat, 5A00DFN � � � � � � � � � � � � � � � � � � � � � � � � � 279.95

Items

Sel f-conta ined, drop-in trigger mod-ule replaces the heavy factory trigger found in many commercial AR-15s and delivers a crisp, clean pull. Designed by competition shooter Chip McCormick to provide all the advan-tages of a fine, match-grade, single-stage trigger without having to fit and adjust multiple components. Rigid, steel, trigger housing holds all the factory-tuned, internal components in proper align-ment for easy, fast installation. Generous, precision-ground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is tweaked at the factory to minimize take-up and over-travel. Thread-ed sleeves provide ultra-smooth pivot surfaces for the hammer and trigger. Two, slightly oversized center pins replace the standard, trig-ger/hammer pins to save wear, reduce friction, and prevent trig-ger wobble; E-clips at both ends prevent pin walk. Single-Stage has a consistent pull weight pre-set at the factory. Two-Stage pull is factory set, too, listed below in first stage/second stage values. Both triggers are available with traditional Curved trigger shoe, or skeletonized Flat shoe that provides a different feel some shooters prefer and gives your AR a distinctive look. abSPECS: Hammer/Trigger - Steel, blued finish. Housing - Steel, in-the-white. Includes (2) center pins w/E-clips. Fits AR-15 with .154" diameter trigger and hammer pins.

CMC TRIGGERS AR-15

TACTICAL TRIGGER GROUPDrop-In Trigger

Module Is Factory Tuned For A Super-

Smooth, Clean-Breaking Pull

207-000-044AV 1-Stage Curved Shoe TTG, 2.5 lb., 7K167G99 � � � � � � � � � � � � � � � � � � � � � � � � �$ 167.99

207-000-045AV 1-Stage Flat Shoe TTG, 2.5 lb., 7K167F99 � � � � � � � � � � � � � � � � � � � � � � � � � � 167.99

#207-000-017AV 1-Stage Curved Shoe TTG, 3.5 lb., 7K169M99 � � � � � � � � � � � � � � � � � � � � � � � � � 185.99

#207-000-018AV 1-Stage Flat Shoe TTG, 3.5 lb., 7K169K99 � � � � � � � � � � � � � � � � � � � � � � � � � 173.99

207-000-046AV 1-Stage Curved Shoe TTG, 4 lb., 7K167P99 � � � � � � � � � � � � � � � � � � � � � � � � � � 167.99

207-000-047AV 1-Stage Flat Shoe TTG, 4 lb., 7K167F99 � � � � � � � � � � � � � � � � � � � � � � � � � � 167.99

207-000-048AV 1-Stage Curved Shoe TTG, 5 lb., 7K00ERA � � � � � � � � � � � � � � � � � � � � � � � � � � 167.99

207-000-049AV 1-Stage Flat Shoe TTG, 5 lb., 7K00DMD � � � � � � � � � � � � � � � � � � � � � � � � � 167.99

207-000-050AV 1-Stage Curved Shoe TTG, 6 lb., 7K00KPG � � � � � � � � � � � � � � � � � � � � � � � � � � 167.99

207-000-051AV 1-Stage Flat Shoe TTG, 6 lb., 7K00JGD � � � � � � � � � � � � � � � � � � � � � � � � � � 167.99

#207-000-019AV 2-Stage Curved Shoe TTG, 1 lb./2 lb., 7K210N00 � � � � � � � � � � � � � � � � � � � � � � � � � 210.00

#207-000-020AV 2-Stage Flat Shoe TTG, 1 lb./2 lb., 7K210F00 � � � � � � � � � � � � � � � � � � � � � � � � � 210.00

207-000-052AV 2-Stage Curved Shoe TTG, 2 lb./2 lb., 7K230G00 � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

207-000-053AV 2-Stage Flat Shoe TTG, 2 lb./2 lb., 7K230Q00 � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

207-000-058AV 2-Stage Curved Shoe TTG, 2 lb./3 lb., 7K00KAI � � � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

207-000-059AV 2-Stage Flat Shoe TTG, 2 lb./3 lb., 7K00LZJ � � � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

207-000-054AV 2-Stage Curved Shoe TTG, 2 lb./4 lb., 7K00MRK � � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

207-000-055AV 2-Stage Flat Shoe TTG, 2 lb./4 lb., 7K00MTM � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

207-000-056AV 2-Stage Curved Shoe TTG, 2 lb./5 lb., 7K00KKP � � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

207-000-057AV 2-Stage Flat Shoe TTG, 2 lb./5 lb., 7K00PPE � � � � � � � � � � � � � � � � � � � � � � � � � � 230.00

Items

Drop-in replacement for standard factory AR-15/M16 hammer/trigger gives you a precise, highly controllable two-stage pull. First stage is as light as 1.75 lbs., while second stage breaks cleanly at 4.5 to 5.5 lbs. abSPECS: Steel, matte black finish. Fits AR-15/M16 lower receiver with .154" hammer/trig-ger pin holes. Inlcudes hammer, hammer spring, trigger, trigger spring, disconnector and disconnector spring.

DPMS AR-15/M16

TWO-STAGE TRIGGER GROUPGives You More Precise Trigger

Control For Long-Range Shooting

#231-000-344AV DPMS 2-Stage Trigger Group, 1C97F56 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 110.99

72 Sig3 p33-48.indd 33 6/18/2019 11:33:43 AM

AR

-15

/M16


SINCE 1939

TR

IGG

ER

S

Capable of semi-auto fire only, four trigger parts convert a full-auto, M16 to semi-auto configuration. Helps local departments/agencies take advantage of military surplus guns with-

out having to train officers for full-auto fire. OEM-style to function correctly. Hardened steel, with black oxide finish, maintains factory function and appearance. Kit includes trigger, disconnector, ham-mer and selector. Gunsmith or armorer fitting recommended. abSPECS: Steel, black, matte finish.

DPMS AR-15/M16

FIRE CONTROL CONVERSION KITThe Right Parts To

Convert An M16 To An AR-15

#231-000-165AV M16 to AR-15 Fire Control Conv. Kit, 3B37K41 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 42.99

The GI-style trigger group from Foxtrot Mike Products couples the simplicity and reliability of the standard mili-tary M16/M4 trigger with en-hancements that give you a smoother, more consistent

pull, cleaner release, and less pre-travel. Each FM-9 trigger is preci-sion machined from supremely hard, highly wear-resistant A2 tool steel - no MIM parts here! - then micro polished to eliminate grit-tiness or "creep" during the pull. Finally, the hammer and trigger in each FM-9 trigger gets a self-lubricating Nickel Teflon coating that reinforces the smoothness of the pull. High-grade stainless steel music wire springs. Drop-in fit in standard AR-15 lower receiver, pins not included - save your (.153" dia.) originals. This trigger has been meticulously engineered by the FM Products team to provide out-standing reliability, performance, and function for tactical, varmint, competition, and sport shooters. ab

FM PRODUCTS AR-15

GI-STYLE TRIGGER GROUPTarget Trigger Precision from

a GI-Style Configuration

#100-026-159AV FM-9 GI-Style Trigger, 6D42E99 � � � � � $ 42.99

The Foxtrot Mike Products Match-Grade Competition Trigger Group gives you a smooth, consis-tent, two-stage pull, with a clean break and little-to-no pre- and over-travel. It’s built with a fit, finish, and attention to detail found in very few AR triggers, let alone one at this price-point. Hammer, trigger, disconnector are machined from hard, hard, HARD A2 tool steel (forget about MIM parts!) to precise dimensions, then micro polished to eliminate "creep" during the pull. Finally, the hammer and trigger themselves get a super-hard, self-lubricating Nickel Boron coating, the finishing touch to ensure the smoothness of the pull. You can put a LOT of rounds down range before this trigger wears out of spec. High-grade stainless steel music wire springs retain full power through many, many com-pressoin cycles. Drop-in fit to standard AR-15 lower receiver, pins not included - retain your (.153" dia.) originals. Most importantly, this trigger has the two-stage pull preferred by precision rifle shooters. It gives you excellent control that lets you "stack" the trigger then pause before you completing the pull through the second stage. ab

FM PRODUCTS AR-15

MATCH-GRADE COMPETITION TRIGGER GROUPDrop-In Two-Stage Target

Trigger Upgrade

#100-026-160AV FM-9 Match-Grade Competition Trigger, 6D81M99 � � � � � � � � � � � � � � � � � � �$ 81.99

Drop-in trigger modules let the shooter quickly change the trigger function of his rifle to suit different types of shooting. Sealed bearings for smooth, s-m-o-o-t-h opera-tion! Plus, a short pull, crisp break, and no overtravel. Easy to install, made of precision-machined high-grade aluminum and A2 tool steel components. A light, refined pull doesn't mean you have to sacrifice reliability: Elft-mann uses a specially-designed full-power hammer spring or polished, double-wound, piano-wire to ensure faster-than-ever lock time and consistent, positive ignition - some-thing any AR shooter needs, regardless of the type of target. Totally self-contained; nothing else to buy to install in your rifle. And these triggers are designed to be 100% drop safe. Available with a traditional Curved shoe or a Straight target-style shoe, with separate models to fit standard .153" pin "mil-spec" receivers or Large Pin (.170") Colt-style lower receivers (if your rifle needs a large pin trig-ger, you probably already know it). NOTE: Elftmann AR-15 triggers will work fine in AR-308 rifles designed to use AR-15 fire control components. Service - adjustable 4 to 7 lb. pull ideal for law en-forcement and military use. Lightweight yet functional skeletonized shoe. 3-Gun - pull weight about 50% lighter than most "factory" AR triggers; adjustable from 23/4 to 4 lbs.; includes piano wire hammer spring (because your rifle can't misfire fast enough to win a com-petition!). SE model has a light, fixed 3.5 lb. pull. Does not have the bearings of the other models (still gives a darned smooth pull), but does include the wound piano wire hammer spring for fast locktime and reliable primer hits. Traditional solid shoe. Match - pull is easily and gratifyingly adjustable from 2.75 to 4 lbs. Piano wire spring and attractive, lightweight skeletonized target-style shoe, too. AR-308 fits mil-spec AR-15, DPMS LR-308, Knights SR-25, and Armalite® AR-10® and is beefed up to handle the heavier recoil of .30 caliber ammo; 23/4 to 4 lb. adjustable. ab

ELFTMANN AR-15/AR-308

DROP-IN TRIGGER MODULES

3-Gun, Curved

#100-028-505AV AR-15 3-Gun Trigger, Curved, 2D248N00 � � � � � � � � � � � � � � � � � � � � � � � 269.00

#100-028-507AV AR-15 3-Gun Trigger, Straight, 2D248Q00 � � � � � � � � � � � � � � � � � � � � � � � 269.00

#100-028-517AV AR-15 SE Trigger, Curved, 2D150F00 162.00#100-028-519AV AR-15 SE Trigger, Straight,

2D150Q00 � � � � � � � � � � � � � � � � � � � � � � � 162.00#100-028-501AV AR-15 Match Trigger, Curved,

2D228G60� � � � � � � � � � � � � � � � � � � � � � � � 249.00#100-028-503AV AR-15 Match Trigger, Straight,

2D228C60 � � � � � � � � � � � � � � � � � � � � � � � � 249.00#100-028-509AV AR-308 Trigger, Curved, 2D228F60 � 249.00#100-028-510AV Large Pin AR-308 Trigger, Curved,

2D228E60 � � � � � � � � � � � � � � � � � � � � � � � � 249.00

#100-028-513AV AR-15 Service Trigger, Curved, 2D228L60 � � � � � � � � � � � � � � � � � � � � � � � � $ 249.00

#100-028-515AV AR-15 Service Trigger, Straight, 2D228D60 � � � � � � � � � � � � � � � � � � � � � � � � 249.00

#100-028-516AV Large Pin AR-15 Service Trigger, Straight, 2D228I60 � � � � � � � � � � � � � � � � 249.00

AR-15 Service, Straight

SE Trigger, Curved

Choose Exactly the Type of Pull Profile & Shoe Configuration - Then Drop It In Your Rifle!

ab

Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, re-peatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions.SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Does not fit HK416 weapons with firing pin safety. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease, and illustrated instructions.#100-007-543AV .154" SD-C Trigger, 7B222F86 � � � � � � $ 240.00#100-007-544AV .154" SD-E Trigger, 7B222K86 � � � � � � 240.00#100-007-545AV .154" SD-3G Trigger, 7B222Q86 � � � � 240.00

B-GRF RAPID FIRE TRIGGER - Gives semi-auto only rifles a glass-smooth trigger pull very simi-lar to the Geissele Super Select Fire trigger de-signed for full-auto weapons in the U.S. Special Operations Community. It pulls like a single-stage, but resets like a two-stage. Includes two trigger springs so it can be set up with a pull of either 4 lbs. or 3.2 lbs. Does NOT covert semi-auto rifles to fully automatic. SPECS: Steel, black finish. Fits semi-automatic AR-15 and clones with .154" hammer/trigger pin holes. May be installed on AR-Style .308 rifle that ac-cepts AR-15 triggers. Includes trigger and hammer assemblies, springs, hammer pin and instructions. #100-014-357AV B-GRF Rapid Fire Trigger,

7B184E36 � � � � � � � � � � � � � � � � � � � � � � � � $ 209.99

B-G2S-E TWO-STAGE ENHANCED TRIGGER - Gives a smooth, light first-stage take up of 2.3 lbs., and a crisp second stage break of 1.2 lbs. Ideal for use in Squad Designated Marksman rifles and similar applications, where accuracy and reliability are critical. SPECS: Steel, black finish. Fits AR-15/M16/M4 and clones with .154" hammer/trigger pin holes. May be installed on AR-Style .308 rifle that ac-cepts AR-15 triggers. Includes trigger and ham-mer assemblies, springs, hammer pin and instructions. #100-014-358AV 2-Stage G-G2S-E Trigger,

7B184A36 � � � � � � � � � � � � � � � � � � � � � � � � $ 209.99

HI-SPEED NATIONAL MATCH TRIGGER - Com-bines Geissele’s exceptional two-stage match trigger with their Service Rifle, Designated Marks-man Rifle, and Match Rifle Spring sets. The result is an adjustable trigger is ready for competition, hunting, and tactical sniper use - any application where exact trigger pull weight is essential for success. Each of the three included spring sets is applicable to a different type of shooting: the Hi-Speed Service Spring is designed for NRA High Power Service Rifle competition and is approved for use in CMP sanctioned competitions. Eas-ily switch to the Hi-Speed Designated Marksman Rifle spring set for tactical and military shooting where trigger pull weight is not regulated. The Hi-Speed Match spring set can be adjusted to low pull weights for enhanced trigger control, letting the shooter wring every ounce of accuracy out of his rifle. With the Geissele Hi-Speed National Match Trigger in your AR-15, you can easily adjust the trigger's first and second stage weights, as well as total pull weight and overtravel, to your exact preference. Service Rifle pull: 3.2-5 lbs. (1st), .5 to 1.5 lbs. (2nd), 4.5 lbs. min. (total). DMR pull: 2.5 to 3.6 lbs. (1st), .5 to 1.5 lbs. (2nd), 3 to 5.1 lbs. (total). Match Rifle pull: 1.5 to 2.5 lbs. (1st), 8 oz. to 14 oz. (2nd), 1.9 to 3.4 lbs. (total). SPECS: Steel, black finish. Fits receivers with .154" hammer/trigger pin holes. Kit includes trigger and hammer assemblies, plus oversized ham-mer pin, and necessary items for installation. #100-024-775AV Hi-Speed National Match Trigger

Set, 7B279F00 � � � � � � � � � � � � � � � � � � � � $ 279.00

SSA TRIGGER - Super Semi-Auto-matic (SSA) 2-stage combat trigger has a fixed 4½ lb. total pull weight, non-adjustable sear engagement, and additional safety features ideal for CQB and mid-range carbine work. A secondary “safety sear” captures the hammer if the pri-mary sear accidentally releases due to hard impact, ensuring the rifle can fire only when the shooter actually pulls the trigger. Trigger pull is optimized for both deliber-ate, aimed fire and quick, “snap shooting.” The first stage builds gradually to 2½ lbs., with a 2 lb. second stage that breaks clean, so the shooter can stay on target throughout the pull. A lightweight hammer driven by a full-power hammer spring speeds locktime and delivers positive ignition of all ammo types. All contact sur-faces are wire-EDM cut to exact dimensions for precise engage-ment free of play. Direct replacement for factory trigger; may be installed without removing the safety. Operation and parts layout is similar to the USGI M16 trigger for easy maintenance. All springs are captive to simplify field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154" (small pin) mil-spec receiver holes to enable installation with basic tools. Super Semi-Automatic-Enhanced (SSA-E) offers an even lighter, 3½ lb. total pull weight, making it an excellent choice for precision Squad Designated Marksman type rifles where both accuracy and reli-ability are critical. First stage builds gradually to 2.3 lbs., followed by a 1.2 lb. second stage with a crisp, “candy cane-like” break. A semi-auto-only version of the Geissele full-auto combat trigger presently used in the U.S. Special Operations community.SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed in AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease, and illustrated instruc-tions.#100-003-620AV SSA Trigger, 7B206G69 � � � � � � � � � � � � $ 240.00#100-006-357AV SSA-E Trigger, 7B222J86 � � � � � � � � � � 240.00

SD TRIGGER - The Super Dy-namic (SD) triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback.

GEISSELE AUTOMATICS AR-15/AR-308

TRIGGERSUser-Adjustable, Adaptable Premium Triggers With Ultra-Fast

Lock Times; Adjustable & Pre-Set Models

ab

ab

ab

ab

The Geissele Automatics Super Speed Precision, or

SSP trigger is their first true single-stage trigger for the AR platform. Quick and easy to in-stall the SSP has no take-up and a super clean break. The reset is short yet still distinct, giving excellent feedback to the shooter dur-ing target engagement. Combining these two capabilities the Super Speed Precision trigger provides the shooter with the confidence to take precise shots where accuracy is crucial and the speed for quick follow up hits is essential. The SSP is manufactured with the same top-quality materials and modern manufacturing techniques as all Geissele triggers. Perfectly designed for a varmint rig or as a starting point of a purpose built 3 Gun rifle, the Geissele SSP provides a fast, accurate and dependable single-stage trigger. ab


SUPER SPEED PRECISION TRIGGEREasy-To-Install

Trigger Upgrades That Give Excellent

Results

Curved

#100-023-410AV Super Speed Precision Trigger M4 Curved Bow, 7B240D00 � � � � � � � � � � � $ 240.00

#100-023-426AV Super Speed Precision Trigger Dynamic Flat Bow, 7B240K00 � � � � � � 240.00

Straight

72 Sig3 p33-48.indd 34 6/18/2019 11:33:49 AM

AR

-15/M

16


brownells.com

G2S TRIGGER - The Geissele 2 Stage (G2S) semi-auto-only trigger drops into your AR-15 to give much of the performance and reli-ability of Geissele’s proven SSA trigger at an economical price. Features a 4½ lb. total pull weight, non-adjustable sear engagement, and a 2½ lb. first stage. Made of the same tool steel as the SSA with wire-EDM cut engagement surfaces. G2S uses a different method to retain the hammer pin, different pins, and lacks laser marking.SPECS: Steel, black finish. Fits semi-automatic AR-15/M16 receivers with .154" diameter hammer and trigger pin holes. May be installed on AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer as-semblies, springs, hammer pin, tube of grease, and installation instructions.#100-011-673AV .154" G2S Trigger, 7B165E00 � � � � � � � $ 165.00

SUPER TRICON TRIGGER - Gives your AR-15 the same high performance and reliability of the SSA trigger with additional upgrades de-signed for operation in harsh environments. Trigger shoe is curved at the top and then be-comes straight, and has pronounced surface texture with raised ribs for positive, non-slip finger contact in wet, muddy, or snowy con-ditions. Features a 4½ lb. total pull weight with a 2½ lb. first stage, plus a full-power hammer spring to ensure positive ignition. Stain-less steel springs withstand rough use and resist corrosion in wet environments. Non-adjustable sear engagement.SPECS: with .154" diameter hammer and trigger pin holes. May be installed on AR-style .308 rifles that accept AR-15 triggers. Kit includes trigger and hammer assemblies, springs, hammer pin, tube of grease and instructions.#100-011-670AV .154" Super Tricon Trigger, 7B240N00 � � $ 240.00


TWO-STAGE TRIGGERSComplete, High-Quality Trigger Systems

For Unique Operating Environments

ab

ab

Single-stage trigger drops in to standard AR-15 lower receivers and gives a short, light pull with rapid reset. Makes follow-up shots easy. Reduces trigger pull to as little as 3 1/4 lbs. Designed as a semi-auto-only derivative of the two-stage Super Select Fire combat trigger made for the Special Operations com-munity. Uses standard hammer and trigger pins. Not recommended for duty use, bench rest or accuracy work. abSPECS: Steel, black finish. Fits semi-auto AR-15/M16 receivers with .154" hammer and trigger pin holes. Includes trigger, tigger pin, 2 trig-ger springs, hammer, hammer pin, hammer spring, slave pin for trigger, disconnector & spring, lubricant, instructions.#100-013-883AV Super 3-Gun Trigger, 7B222I86 � � � � � $ 239.99

GEISSELE AR-15/M16

SUPER 3-GUN TRIGGERFast-Action Trigger Allows Rapid

Follow-Up Shots

This easy to install, ATF-approved trigger sys-tem, helps you achieve a dramatically a faster rate of fire from your semi-auto AR-15 without resorting to full-auto or burst-mode operation. The three-position selector allows user to switch from Safe, to Fire for traditional semi-automatic fire, or kick it up to Binary Mode which fires one round when the trigger is pulled, and another when the trigger is released. User can switch back to tra-ditional fire, even after the trigger has been pulled, by simply moving the selector back to semi-auto mode and then safely releasing the trigger. Includes an enhanced buffer spring for added reliability. Trig-ger-pull weight measures about 4.5 lbs. Fits .154" trigger-pin holes. Cannot be purchased by residents of CA, DC, ND, NJ, NY or WA. ab

Enables a Dramatically Faster Rate of Fire From Your AR-15

#100-030-476AV BSFIII Binary Trigger, 7D386B99 � � � � $ 386.99

FRANKLIN ARMORY AR-15

BSFIII BINARY TRIGGER

Hiperfire’s EDT triggers give your AR-15 an upgraded single-stage trigger pull without sacrificing "mil-spec" reli-ability. All four Enhanced Duty Triggers deliver a medium pull weight of 4.5 or 5.5 lbs. - lighter than a plain G.I. trigger for sure, but safe enough for law enforcement, service rifle competition, and personal defense use. Mechanical advantage built into the EDT trigger ge-ometry gives the lighter-than-mil-spec pull weight, while mil-spec hammer energy is preserved to ensure hard, positive primer strikes. Hiperfire coupled the lighter weight with an overall pull profile that is smooth and consistent, with a clean, decisive break, short over-travel, and a fast reset you can feel and hear, making the EDT a very comfortable "shooter’s" trigger, with the following features:

• Single-stage with minimal creep• 2 interchangeable hammer springs for 4.5 or 5.5 lb. pull weight• SwingFast Hammer Head™ gives unusually fast locktime• Extra-power hammer spring for positive hammer strikes without

increasing pull weight• Self-cleaning - designed to allow debris to fall out to prevent

jams & reset problems• Fits small-pin (.153") AR-15 lower receivers & AR-308 rifles that

use small-pin AR-15 triggersHiperfire offers the EDT trigger in four configurations: Sharp

Shooter is the base-model with features listed above and a curved trigger shoe. Heavy Gunner has the curved shoe and even heavier SwingFast hammer than the Sharp Shooter for ultra-reliable ham-mer strikes. The Designated Marksman has Hiperfire's Duplex Trig-ger Bow. Place your finger in a high position for a heavier pull and an extra measure of safety to prevent premature discharge under stress. Low position for precise, target-rifle control. Also has extra-weight Swingfast hammer. Select Fire/Full-Auto model is beefed up for full-auto select-fire AR-15/M16/M4 type rifles carbines; curved shoe. Hiperfire has made the EDT trigger line all about choice: you get to choose the type of trigger pull profile that works best for you - without breaking the bank to do it. ab

HIPERFIRE AR-15/AR-308

EDT TRIGGERSSmooth, Consistent,

Medium-Weight Pull - BIG Improvement Over G.I. Trigger

#100-029-408AV EDT Sharp Shooter Trigger Assembly, 3D84K99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 94.05

#100-029-409AV EDT Heavy Gunner Trigger Assembly, 3D84B86 � � � � � � � � � � � � � � � � � � � � � � � � � � 94.05

#100-029-410AV EDT Designated Marksman Trigger Assembly, 3D84I86 � � � � � � � � � � � � � � � � 94.05

#100-029-411AV EDT Select-Fire/Full-Auto Trigger Assembly, 3D127D71 � � � � � � � � � � � � � � � 141.55

Heavy Gunner

Sharp Shooter

Hiperfire’s revamped Hipertouch® trigger line gives the AR-15 shooter an impressive array of options in a single-stage trigger with shorter pre-travel, faster reset, and increased hammer energy than the standard G.I.-type trigger. Dual coil springs across the top of the Hiperfire® trigger reduce friction on the sear and increase hammer striking power by 35% over a "mil-spec" trigger, while a pair of inter-changeable color-coded springs let you choose between a 2.5 lb. or 3.5 lb. pull weight. Of course, all the Hipertouch® models give your AR-15 a smooth, consistent pull with just a hint of creep, a snappy break, and a very short over-travel, followed by fast reset so you’re ready to take the next shot. A Hipertouch® trigger in your AR-15 will help you improve your shot timing, control, and confidence for more accurate hits on the target. The Hipertouch’s consistent pull doesn’t signal hammer release like some triggers, so the shooter doesn’t develop a flinch in anticipation of the rifle firing. The shooter can stay relaxed and doesn’t build tension in the trigger finger. All of this adds up to better control over the gun, better shot timing, im-proved confidence and more accurate shooting. Features include:

• Consistent single-stage pull with a just a hint of "creep"• Interchangeable hammer springs give two pull weight options

- 2.5 lb. or 3.5 lb.• NO fussy setscrews that can back out or otherwise lose your

settings• Unusually fast locktime• Hard, positive hammer strikes without compromising pull

weight• Fits small-pin (.153") AR-15 lower receivers & AR-308 rifles that

use small-pin AR-15 triggers• 6 models to choose from - read on... ab

GENESIS - The Hipertouch® base model, an excellent upgrade for law enforcement, military, service rifle competition shooters, and personal defense.#100-029-412AV Hipertouch Genesis Trigger

Assembly, 3D171M44 � � � � � � � � � � � � � � $ 190.00

AUTO - Offers the same functionality as Genesis for select-fire full-auto M16/M4-type rifles. Built like the proverbial tank to handle the punishment of fast-cycling operation. #100-029-417AV Hipertouch Auto Full-Auto Trigger

Assembly, 3D199N99 � � � � � � � � � � � � � �$ 237.50

ELITE - A match-quality trigger that breaks quickly, after even shorter pre-travel than the Genesis, with very quick, positive reset. Letoff is extremely easy to control. #100-029-413AV Hipertouch Elite Trigger

Assembly, 3D171E44 � � � � � � � $ 190.00

COMPETITION - Ideal for competitive shooters who want the bare minimum of pre-travel and a straight trigger shoe. The adjustable finger pad gives you even more refined control. It can be set at five different positions for further refinement of pre-travel and trigger weight. Position the shoe farther down the bow to increase lever-age and effectively reduce pull weight. The result is effectively 10 pull weight options rather than two. Or leave the pad off and enjoy the enhanced tactile control of a straight trigger. #100-029-415AV Hipertouch Competition Trigger

Assembly, 3D199E99 � � � � � � � � � � � � � � �$ 237.50

REFLEX - Similar to Competition but with a traditional curved trig-ger shoe - same trigger pull with virtually no creep. Excellent for Designated Marksman rifles, LE use, and 3-gun competition. #100-029-414AV Hipertouch Reflex Trigger Assembly,

3D192A85 � � � � � � � � � � � � � � � � � � � � � � � � � $ 213.75

ECLIPSE - The ultimate Hipertouch® trigger, with all the upgrades of the Competition model, including straight shoe and adjustable finger pad plus Hiperfire’s Nickel Bliss electroless Nickel Boron (NiB) finish on all contact sur-faces for enhanced corrosion protection and, more im-portantly, an EVEN SMOOTHER feel than its Hipertouch® siblings. This pull is so smooth, clean, and consistent you’ll think the laws of physics have been broken. They haven’t. #100-029-416AV Hipertouch ECLipse Trigger

Assembly, 3D235F70 � � � � � � � � � � � � � � $ 261.25

HIPERFIRE AR-15/AR-308

HIPERTOUCH TRIGGERSBreathtakingly Smooth, Light Pull With Plenty of Hammer Oomph

Easy-to-fit replacement for factory trigger is fully adjustable for engage-ment and overtravel, and can be set with a pull weight as light as 3.5 lbs. Lets you upgrade an AR-15 or an AR-style .308 rifle that uses an AR-15 trigger, while keeping your current hammer and pins. Redesigned sear geometry and advanced metallurgy result in a precision-ground sear edge that delivers a precise, consistent letoff and prevents the kind of wear that causes doubling and other problems. Extremely short reset enables fast follow-up shots, a critical advantage on tactical and competition rifles. Installs in minutes with no permanent altera-tions to the rifle. Disconnector spring, engagement screw, and over-travel screw are already installed; also includes disconnector, trigger return spring, and two hammer springs, and .050" hex key. Use with JPSH-1A Speed Hammer (sold separately) for best performance. Comes with a competition (yellow) hammer spring, for a trigger pull of between 3 and 3.5 lbs.—for competition and recreational shooting—plus a “tactical” spring (red) that gives a 3.5 to 4 lb. for applications demanding a high level of ignition reliability, including police/military use, mil-spec ammunition with hard primers, and in AR-style .308 rifles. abSPECS: Steel, Parkerized finish. Fits rifles with .154" (military and current aftermarket) diameter trigger pins. Measure your pins before ordering. Includes complete instructions and a CD-ROM with 35-minute video showing step-by-step installation.

JPFC1-EZ TRIGGER™ SYSTEM - Complete trigger system installs in five minutes without fitting or modification of parts on the trig-ger or your receiver. All adjust-ments are made with setscrews, eliminating the risk of ruining the trigger due to errors in fitting. In-cludes the JP Speed Hammer for fast lock time, plus “anti-walk” pins with button head cap screws for easy removal and reinstalla-tion of the trigger system. Overtravel adjustment screw lets you set your trigger for a clean, crisp, single-stage release. Comes with two hammer springs: install the yellow spring to get a 3 to 31/2 lb. pull for competition or recreational shooting with non-military ammuni-tion. The red spring gives a 31/2 to 4 lb. pull and more hammer force for use with the harder primers found on military (5.56mm NATO) ammo and for law enforcement duty use. The red spring should be used in any installation on an AR-style .308 rifle. For a heavier, 41/2 lb. pull for tactical applications or NRA Service Rifle competition, install the JPS4.5 spring kit (available below).SPECS: Steel, black oxide finish. Fits rifles with .154" dia. (military and current commercial rifles) hammer and trigger pin holes. Measure your pins before ordering. NOTE: Will not fit Colt rifles with pinned-in full-auto sear block. Kit includes trigger, hammer, disconnector/sear trigger spring, yellow hammer spring, red hammer spring, safety assembly, (2) anti-walk pins, disconnector spring, instructions, and DVD with video showing step-by-step installation.#452-000-120AV JPFCP-1EZ Trigger Kit, .154" Pins,

2E167P55 � � � � � � � � � � � � � � � � � � � � � � � $ 189.99

JPS SERVICE RIFLE SPRING KIT - Replacement spring for the JP Adjustable Trigger Kit lets Service Rifle, law enforcement and tacti-cal shooters achieve a clean-breaking, 4.5 lb. trigger when used with JP components. Can also be used with factory or aftermarket triggers and hammers to improve felt trigger pull. JPS4.0 gives 4 lb. trigger pull. JPS4.5 gives 4½ lb. pull.SPECS: High tensile strength steel spring wire. Includes (1) hammer and (1) trigger spring.#452-000-105AV JPS4.0 Spring Kit, 2E10F51 � � � � � � � � $ 10.99#452-000-015AV JPS4.5 Spring Kit, 2E10Q51 � � � � � � � 10.99

JP ENTERPRISES

AR-15/AR-STYLE .308 JPFC-1 ADJUSTABLE TRIGGER SYSTEM

Smooth, Even Trigger Pull, Precise Letoff; Easy Installation

#452-015-000AV JPFC-1 Adj. Trigger Kit, .154" Pins, 2E109A48 � � � � � � � � � � � � � � � � � � � � � � � � �$ 113.99

#452-015-100AV .154" Speed Hammer, 2E54M04 � � � � � 56.99

ab

ab

JMT's single-stage trigger gives you an im-mediate upgrade in smoothness and weight of pull, plus a crips, clean release, followed by a light-ning fast reset. It's a full-on trigger job you can instlal yourself. Light, factory-set 3.5-4 oz. pull and clean, decisive release helps improve your

accuracy. Curved, skeletonized trigger is comfortable on the finger, and also light enough to aid in the fast reset. Self-contained module is easy and fast to install with no fine-tuning and fiddiling needed; drop it in and go shoot. Note: The set screw should not be tampered with. Any attempts to modify the trigger will void the warranty. abSPECS: 17-4 stainless steel hammer, trigger, and disconnector. Housing machined from high-grade 6061 T6 aluminum alloy with low-key metallic silver anodized finish. Anti-rotation pins Included. Fits rifles that accept .153" hammer/trigger pins.

JAMES MADISON TACTICAL AR-15/M16

SABER SINGLE-STAGE TRIGGERDrop-In Installation - Instant Improvement In

Smoothness, Weight & Crispness

#100-023-249AV AR-15 Saber Drop In Single Stage Trigger, 6B92L80 � � � � � � � � � � � � � � � � � $ 94.99

TR

IGG

ER

S

72 Sig3 p33-48.indd 35 6/18/2019 11:33:52 AM

AR

-15

/M16

TR

IGG

ER

S


SINCE 1939

Low-mass hammer delivers a 50% shorter lock time than the standard factory hammer for faster ignition and improved accuracy potential. Designed to work with – and enhance the performance of – the JP Enterprises Adjustable Trigger Kit (available separately). Not for use with the standard factory trigger group. abSPECS: A2 tool steel, hardened to Rc 58, Parkerized finish, contact surfaces in-the-white. .7 oz (20g) wt. Fits rifles with the .154" dia. (military and current aftermarket) hammer pins.

JP ENTERPRISES AR-15 SPEED HAMMERFaster Ignition; Cleaner Pull

#452-015-100AV .154" Speed Hammer, 2E54M04 � � � � � �$ 56.99

JP's Fire Control Module combines the unrivaled quality of their renowned triggers with the convenience of an easy to install, drop-in module. Pre-assembled and hand-tuned in a stainless steel housing, the Fire Control Module uses wire-cut components for a super-precise parts fit - no user adjustment needed. JP Anti-Walk Pins remove all slop movement of fire control compo-nents for solid, reliable function. Comes with ambidextrous safety selector and alternate hammer spring for adjustable pull weight. Trigger shoes are available as

Curved, Flat, and Roller. Roller shoe comes with the Armageddon Gear Revolution Trigger which auto-corrects for trigger control er-ror by allowing trigger finger to roll to a neutral position. The revers-ible, JP ambidextrous safety selector has a unique drum design that ensures perfect safety function. ab


JPFC-M FIRE CONTROL MODULEQuick, Easy Drop-In Installation,

Custom-Tweaked Quality

Straight Shoe

#452-000-242AV JPFC-MC Fire Control Module, Curved, 2E295E31 � � � � � � � � � � � � � � � � � � $ 313.99

#452-000-243AV JPFC-MF Fire Control Module, Flat, 2E295Q31 � � � � � � � � � � � � � � � � � � � � � � � � � 313.99

#452-000-244AV JPFC-MR Fire Control Module, Roller, 2E295A31 � � � � � � � � � � � � � � � � � � � 313.99

Curved Shoe

Roller Shoe

Sometimes you want a high-end match trigger or a drop-in trigger upgrade module... and sometimes, when you just need high-quality mil-spec replacement parts, turn to Luth-AR - the newest old name in the AR-15 world. You may or may not recognize founder Randy Luth's name, but you know the name of the first AR-15

company he started in 1986 - DPMS. Luth-AR brings to the table Randy's 40+ years of experience in the industry, as evidenced by a complete line of mil-spec AR-15 components sold individually, like these fire-control parts, so you can buy only what you need for your project. All parts made of hardened carbon steel with black Parkerized finish. Trigger & Hammer have standard .155" pin hole. Hammer includes hammer pin retainer & J spring; will fit AR-308 but requires heavier-weight .308 hammer spring. AR-15 Discon-nector fits standard semi-auto rifles. M16 Disconnector is M16A1 configuration to work with auto sear. M16 Auto Sear includes spring; pin must be purchased separately.

LUTH-AR AR-15/M16

FIRE CONTROL COMPONENTSHigh-Quality, Individual Mil-Spec Parts from a Name You Can Trust

#100-028-039AV AR-15 Semi-Auto Trigger, 3D12F80 � � � $ 15.93#100-028-041AV AR-15 Mil-Spec Hammer w/Spring,

3D15D50 � � � � � � � � � � � � � � � � � � � � � � � � � � � 17.85#100-028-037AV AR-15 Disconnector, 3D3K72 � � � � � � � � 4.65#100-028-038AV M16 Disconnector, 3D6M38 � � � � � � � � � 8.45#100-028-042AV M16 Auto Sear w/Spring, 3D13M50 � � � 18.75#100-028-043AV M16 Auto Sear Pin, 3D1E08 � � � � � � � � � � 1.87

Drop-in trigger module installs quickly and easily to give you an instant improvement of the trigger pull on a “small pin” AR-style rifle. It's a straightforward 4.5 lb. single-stage pull with a neat, crisp break. Pull weight is non-adjustable, and comes pre-assembled inside the bright red aluminum housing. Rubber urethane feet pre-vent marring the inside of the receiver. Includes KNS PrecisionTM anti-walk pins for both standard AR-15 and POF-USA ambidextrous receivers. abSPECS: A2 steel shoe, disconnector, and hammer, heat-treated to Rc 70, with matte black Nitride finish. Machined aluminum module hous-ing, hardcoat anodized, red. Fits "small pin" receivers with .154" trigger/hammer pin holes.

PATRIOT ORDNANCE FACTORY AR-15/M16

DROP-IN TRIGGER SYSTEMSelf-Contained Unit Delivers A Light, Crisp Pull

#100-014-090AV Single Stage Trigger, 7D179J99 � � � � � $ 179.99Using their innovative

"sear link" technology, the KE Arms team has eliminated the disconnector entirely, producing a constant engagement between the sear and hammer that gives a smooth, consistent pull. Also ensures fast resets for speedy follow-up shots. Since there’s no disconnector, energy is conserved and concentrated, producing that gratifyingly smooth pull with less wear and superior longevity. Just as important, this self-contained, drop-in module fits the fire control pocket in any mil-spec lower receiver. The single-stage 4.5 lb. "Goldilocks" pull is not to heavy, not too light, and it's pre-set at the factory to have minimal takeup/overtravel (not user adjustable). Fits standard .153" hammer/trigger pin receiver holes. You can engage the safety regardless of whether the hammer is cocked or down, reducing the risk of an accidental discharge when transitioning or clearing malfunctions. SLT-1 has a traditional curved shoe guides your finger into the same location for every shot, ensuring a consistent pull. The straight shoe of the SLT-2 lets you place the pad of your finger exactly where you want it to produce maximum leverage with the least amount of effort. Focused leverage gives you the "feel" of a lighter pull without actu-

KE ARMS AR-15 SLT TRIGGERSMatch-Grade

Performance & Control in an Easy-To-Install

Self-Contained Module

SLT-2

#100-027-833AV SLT-1 Curved Trigger, 6A171M39 � � � �$ 179.96#100-027-834AV SLT-1 Curved Trigger w/Amb Safety,

6A197F10 � � � � � � � � � � � � � � � � � � � � � � � � � � 206.96#100-027-835AV SLT-2 Straight Trigger, 6A171B39 � � � � 179.96#100-027-836AV SLT-2 Straight Trigger w/Amb Safety,

6A197B10 � � � � � � � � � � � � � � � � � � � � � � � � � � 206.96

SLT-1

ally reducing the amount of force needed to release the hammer. Both modules are available alone or or packaged with the KE Arms ambidextrous safety that can be set to a 90 deg. or 45 deg. throw. Brownells Gun Tech™ Note: Both the SLT-1 and SLT-2 fit pistol cali-ber blow back systems and high-velocity bolt/carrier groups, too. It will even stand up to the trigger eating reputation of SIG Sauer’s MPX (will not work with SIG MCX firing pin safety.) ab

Drop one of Rise's super easy-to-install trigger mod-ules in your AR to replace the factory mil-spec unit and get a sweet 3.5 lb. pull with-

out creep, "stacking" or indistinctness, followed by a reassuringly crisp, clean break. Machined from a combination of heat-treated tool steel and aluminum, this single stage trigger brings you high-performance at a budget friendly price. Includes a pair of anti-walk trigger pins, so you can be sure your pins won't ever work loose under strings of fire, plus an integrated drop safety feature. RA-140 Super Sport model available with either a straight or curved shoe, both with a matte black finish. RA-434 High-Performance trigger has a lightened hammer and a friction-reducing premium nickel boron coating on all interior parts for ultra-smooth contact surfaces - and of ultra-fast locktimes. Trigger provides a quick reset and low over travel for serious speed along with an ultra-smooth break and a crisp, clean release. RA-535 Advanced Performance model has a bright-red anodized housing like a Ferrari because... it's crazy fast! Same 3.5 lb. pull weight as the other triggers but reset is exception-ally fast and over-travel nearly nonexistent- so fast, dead-on accu-rate follow-up shots become almost boringly predictable. The pull itself is delightfully smooth and consistent. Includes anti-rotation trigger pins included. ab

RISE ARMAMENT AR-15/M16

DROP-IN SINGLE-STAGE TRIGGERS

Superbly Balanced, Consistent Trigger Pullls - From a Drop-In Module!

#100-033-584AV RA-140 Super Sport Trigger, Curved, 9Z96Q93 � � � � � � � � � � � � � � � � � � � � � � � � � $ 129.00

#100-033-583AV RA-140 Super Sport Trigger, Flat, 9Z96Q93 � � � � � � � � � � � � � � � � � � � � � � � � � 129.00

#100-033-585AV RA-434 High-Performance Trigger, Black, 9Z137P12� � � � � � � � � � � � � � � � � � � 159.00

#100-033-586AV RA-434 High-Performance Trigger, Silver, 9Z137I12 � � � � � � � � � � � � � � � � � � � 159.00

#100-025-422AV RA-535 Advanced Performance Trigger, 9Z217J79 � � � � � � � � � � � � � � � � � 249.00

RA-140 Super Sport - Curved RA-535 Advanced

Drop-in, match grade trigger pro-vides a crisp, 41/2 to 5 lb., 2-stage, trigger pull to improve accuracy for competition or varmint shooting. Sear engagement point is located behind the hammer to

reduce pull weight. Low mass hammer speeds lock time. Includes trigger and hammer pins. Fits AR-15 receivers with .154" hammer and trigger pins. abSPECS: Steel, matte black finish. Fits AR-15 receivers with .154" hammer/trigger pins only.

ROCK RIVER ARMS AR-15

NATIONAL MATCH 2-STAGE TRIGGER

Lightens & Smoothes Trigger Pull For Improved Accuracy

#739-000-011AV .154" 2-Stage Trigger, 9C85D79 � � � � � �$ 87.99

Self-contained mod-ule is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trig-ger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resis-tance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. Available with standard solid Curved or target-style Straight trigger shoe, or a distinctive-looking, lighter-weight Skeletonized shoe, all with choice of 3 lb., 4 lb. or 4.5 lb. pull weight. AR-308 model has a factory-set 4 lb. pull weight, a solid shoe, and more hammer mass to ensure positive ignition of harder .308/7.62mm primers. abSPECS: Hammer – S7 tool steel, natural color, Teflon-Nickel coated. Trig-ger/Internal Components - Hardened A2 tool steel, black oxide finish. Housing – 6061 T6 aluminum, gold anodized finish. Fits rifles with .154" diameter hammer/trigger pin holes. Will not fit Colt-manufactured AR-15s with sear block.

TIMNEY AR-15

DROP-IN TRIGGER MODULE

STOCK # SHOE TYPE PULL WEIGHT PRICE#883-000-024AV Curved 3 lb. 3H00LFL $ 199.99#883-000-041AV Curved 4 lb. 3H272C99 $ 272.99#883-000-042AV Curved 4.5 lb. 3H00QQD $ 248.99#883-000-073AV Straight 3 lb. 3H00GFM $ 229.99#883-000-074AV Straight 4 lb. 3H00NMB $ 245.99#883-000-075AV Straight 4.5 lb. 3H00DVF $ 245.99#883-000-026AV Skeleton 3 lb. 3H00NWF $ 288.99#883-000-036AV Skeleton 4 lb. 3H299Q95 $ 271.99#883-000-037AV Skeleton 4.5 lb. 3H00PBR $ 299.99#883-000-023AV AR-308 Curved 4 lb. 3H285H95 $ 267.99#883-000-076AV AR-308 Straight 4 lb. 3H00IKE $ 274.99#883-000-063AV AR-308 Skeleton 4 lb. 3H329N95 $ 305.99

Obtain A Super-Smooth Pull & Crisp Letoff In Minutes

#100-029-372AV AR-15 Sporter Trigger Assy, 8Z33Q44 � � $ 36.99#100-029-343AV AR-15 Sporter Trigger, Only, 8Z16P12 � � 17.99#100-029-348AV M16 Full-Auto Trigger, Only, 8Z14A12 � � 15.99

Schmid is a high-volume precision-machinging firm that has built a LOT of tirggers for military rifles - so they know how to meet exacting specifications while also hitting a budget. Ideal for your next build, re-build, or upgrade of an older rifle that’s seen-better-days, their triggers are meticu-lously machined to correct dimensions for a drop-in fit with your mil-spec lower. Constructed from strong 8620 steel, these triggers have a Nickel Teflon coating for an exceptionally smooth metal-on-metal contact, with superior durability and corrosion resistance. Fits "small pin" (.153") receivers. You can buy JUST the trigger itself, or the whole fire-control as-sembly. AR-15 Sporter trigger is configured for use in semi-auto rifles ONLY. M16 Full-Auto works in any full-auto AR-15, M16, or AR-308 rifle that uses an M16 "open back" trigger. AR-15 Trigger Assembly includes trigger, hammer, semi-auto disconnector, plus trigger, hammer, and disconnector springs. Kit does not include the hammer/trigger pins or a safety selector. All NFA rules apply. ab

SCHMID TOOL & ENGINEERING

AR-15/M16 TRIGGERSSometimes You Just Need a Great Trigger - Precision Machined for

Superb Fit, Performance & Strength

M16 Trigger ONLY

AR-15 Trigger Kit

72 Sig3 p33-48.indd 36 6/18/2019 11:33:56 AM

Like all Timney triggers, the Targa is a self-contained, drop-in unit that will upgrade your AR-15 with an excep-tionally smooth, crisp, two-stage trigger. No gunsmithing, fitting, or adjusting required. It comes factory-calibrated with a 2 lb. first stage, followed by a 2 lb. second stage - a type of pull preferred by many long-range shooters. Available with a Short first-stage pull or a Long one - your choice. You also get to choose between a Curved trigger shoe or a Straight one, which some shooters feel gives them better control. The whole module is contained in a housing of light yet strong 6061 T6 aluminum alloy. Hammer is wire-EDM cut from S7 tool steel that merges hardness to resist wear with superb im-pact resistance to withstand hard use without failing. A Teflon-nickel coating provides permanent lubricity. The trigger shoe and other key components are wire-EDM cut from A2 tool steel, then heat-treated to Rc 58 for wear- and breakage-resistance. Install using your rifle’s original hammer/trigger pins; the Timney module elimi-nates pin rotation and walkout. ab

TIMNEY AR-15 TARGA TRIGGERChoose Your

Preference: Short or Long First Stage? Curved or

Straight Shoe?

#883-000-102AV Short Targa Trigger, Curved, 3H250F99 � � � � � � � � � � � � � � � � � � � � � � � � $ 250.99

#883-000-103AV Short Targa Trigger, Straight, 3H00NMS � � � � � � � � � � � � � � � � � � � � � � � � 245.99

#883-000-104AV Long Targa Trigger, Curved, 3H00IDG � � � � � � � � � � � � � � � � � � � � � � � � � 233.99

#883-000-105AV Long Targa Trigger, Straight, 3H00MIA � � � � � � � � � � � � � � � � � � � � � � � � � 222.99

Short/Curved

Long/Curved

Timney's Calvin Elite Custom AR-15 Trigger is fully adjustable to accommodate your hand size and shooting style, for a truly custom fit to YOU. Like all Timney triggers, it is an easy-to-install drop-in module that completely replaces the fac-tory trigger/hammer/sear. What sets the Calvin Elite Custom AR-15 Trigger apart is its detachable trigger shoe that can be adjusted front to back, side to side, or even up and down to put the finger pad exactly where it’s best for you. It comes with 4 interchangeable trigger shoes: curved, flat, heeled, and knurled - so you can choose the one that’s best for you. As a true, high-end match target trigger, it has a fixed, factory-set 1.5 lb. trigger pull with zero creep and a crisp, consistent, glass-like break. Its remarkably quick and tactile reset means you can make those fast, precise follow-up shots, too. But Timney doesn't sacrifice reliability for a nice pull because the CE Custom is also fitted with their ultra-reliable 5 lb. hammer spring for reliable ignition. Drops into any standard, small-pin mil-spec AR-15 lower receiver (and AR-308s that use an AR-15 trigger). ab

TIMNEY TRIGGERS AR-15

CALVIN ELITE CUSTOM TRIGGERA True Target Trigger With

Multiple Levels of Adjustability

#883-000-109AV Calvin Elite Adjustable AR-15 Trigger, 3H299K95 � � � � � � � � � � � � � � � � � � � � � � � � $ 299.95

Wilson's drop-in trigger module fits any mil-spec small-pin AR-15 and delivers a light, superbly crisp trigger pull right from the box,

with no adjustment or fine-tuning. Safe enough for tactical opera-tions and combat, yet light enough to ensure an ultra-clean break that’s closer to a bolt action than a typical tactical rifle. Exceptionally short, positive reset gets you back on target and ready to take the next shot almost instantly. Unique hammer geometry keeps weight to a minimum for ultra-fast lock time, yet provides plenty of kick to ensure reliable ignition, even on hard military primers. A secondary “rescue” sear grabs the hammer if the primary sear fails when the weapon is dropped or severely jarred—meets military specifications for drop safety. CNC-machined, hardened tool steel hammer, sear, and trigger body with precision-ground contact surfaces are built to run hard in competition or combat, all contained in the rugged machined aluminum housing. TR-TTU - Single-stage 4 lb. pull has zero take-up and an ultra-clean break. TR-TTU-M2 - “Semi” two-stage, match-grade 4 lb. trigger has an abbreviated initial stage that establishes sear engagement for safe, reliable operation in high-stress tactical environments, followed by a clean second-stage release. TR-TTU-3G - Rolling two-stage trigger designed for 3 gun competition features a short pull with a 3.5 to 4 lb. break and super-fast reset for quick follow up shots. Eliminates “trigger freeze” in the heat of competition or during tactical shooting. abSPECS: Trigger/Hammer/Sear – Hardened tool steel, matte gray finish. Housing – Aluminum, anodized, matte black. Fits AR-15 with .154" trigger and hammer pins. Includes two .154" pins and installation instructions.


TACTICAL TRIGGER UNITMatch-Grade Pull From A Rugged,

Reliable Drop-In Module

#965-000-071AV TR-TTU Tactical Trigger Unit, 5F249C99 � � � � � � � � � � � � � � � � � � � � � � � � $ 237.99

#965-000-088AV TR-TTU-M2 Tactical Trigger Unit, 5F211C99 � � � � � � � � � � � � � � � � � � � � � � � � � 190.99

#965-000-179AV TR-TTU-3G Tactical Trigger Unit, 5F267C99 � � � � � � � � � � � � � � � � � � � � � � � � 267.99

These precision-machined components are coated with WMD’s ultra-tough NiB-X nickel boron finish for superior durability,

corrosion resistance, and exceptionally smooth metal-on-metal contact. The coating allows the

parts to function under extreme conditions with little or no lubrica-tion, and gives carbon fouling nothing to adhere to, so cleanup is much easier than with ordinary finishes. Allows longer intervals be-tween cleaning without loss of weapon performance. Components are available as a set or separately. abSPECS: Steel with nickel boron silver finish. Hammer, disconnector, and trigger fit small-pin (.154") AR-15 lower receivers only.

WMD GUNS AR-15/AR-STYLE .308

NIB-X™ COATED FIRE CONTROL COMPONENTS

Ultra-Hard, Ultra-Slick Finish Gives Smooth, Reliable Performance

#100-010-746AV NiB-X Hammer/Trigger/Disconnect Set, 3C53D01 � � � � � � � � � � � � � � � � � � � � � � $ 62.99

#100-010-178AV NiB-X AR-15 Hammer, only, 3C21F29 � � 25.99#100-009-997AV NiB-X AR-15 Trigger, only, 3C20I34 � � 25.99#100-009-990AV NiB-X AR-15 Disconnector, only,

3C9G68 � � � � � � � � � � � � � � � � � � � � � � � � � � � 11.39

Single-stage trigger gives your AR a crisp, clean break similar to the trigger pull on a bolt action rifle. Precision engineered trig-gers virtually eliminate take up and provide a super-fast reset. Trig-ger shoe, hammer and disconnector are wire EDM-cut from heat treated tool steel. Both the hammer and disconnect are given a nickel boron coating for an ultra-smooth release. Assembly hous-ings are machined from 6061 T-6 billet aluminum with a hardcoat anodize finish for corrosion resistance and durability. Select models have a steel assembly housing. Triggers are available with a curved shoe in 3, 4 and 4.5 lbs. pull weights or a straight shoe with 3 or 4 lbs. pull weights. Classic trigger has a straight shoe with a little forward curve right at the bottom to serve as a convenient finger stop. A DLC (diamond-like carbon) coating on all the moving parts produces a combination of high micro-hardness and super-low friction for an amazingly smooth pull that'll help leave other competitors awe-struck at your steady hand and super-human control! ab

VELOCITY TRIGGERS AR-15/M16/AR-STYLE .308

DROP-IN TRIGGER SYSTEM

Makes Your AR Feel Like A Bolt Action Rifle

#100-022-748AV 3 lbs. Curved Velocity Trggr, 1E132Q91 � � � $ 149.99#100-022-753AV 3 lb. Straight Velocity Trggr, 1E132B91 � � 149.99#100-022-749AV 4 lb. Curved Velocity Trggr, 1E132A91 � � 149.99#100-022-756AV 4 lb. Curved Velocity Trigger, Steel,

1E132Q91� � � � � � � � � � � � � � � � � � � � � � � � � 149.99#100-022-754AV 4 lb. Straight Velocity Trggr, 1E132Q91 � � 149.99#100-022-757AV 4 lb. Straight Velocity Trigger, Steel,

1E132K91 � � � � � � � � � � � � � � � � � � � � � � � � � 149.99#100-022-752AV 4.5 lb. Curved Velocity Trggr,

1E132B91 � � � � � � � � � � � � � � � � � � � � � � � � � 149.99#100-022-755AV 4.5 lb. Straight Velocity Trigger,

1E132D91 � � � � � � � � � � � � � � � � � � � � � � � � � 149.99 100-031-258AV 3 lb. Straight Classic Trigger,

1E126A16 � � � � � � � � � � � � � � � � � � � � � � � � � 143.95

Classic Straight w/

RestCurved Straight

ItemA

R-15

/M16

TR

IGG

ER

S

Redesigned hammer pin and anti-rotation links provide the strongest possible system to eliminate pin rotation, and will withstand the additional force exerted by 9mm conversions and suppressed .223 upper receivers. Helps prevent wear to receiver holes, which is espe-cially important for increasingly-valuable M16 and pre-ban receiv-ers. Notched hammer pin locks into slots in the anti-rotation links; trigger is secured with locking screws, and includes lube ports so adequate lubrication reaches the trigger. Anti-rotation links fit on the outside of the receiver to prevent all movement. Pins are CNC-machined, centerless ground for uniformity and heat treated for durability. Available in Standard .154" diameter and Oversized .155" diameter. Oversized Pins help improve accuracy and trigger control by tightening up any trigger slack that may exist in worn or new receivers. Standard-sized pins drop-in and require no modification to the receiver; oversized pins require reaming out the holes. abSPECS: 416 stainless steel pins. .900" (22.8mm) long, .154" (3.91mm) or .155" (3.93mm) dia. Set includes (1) hammer pin, (1) trigger pin, (2) screws, (2) anti-rotation links, hex wrenches, and installation tool. Anti-Rotation Links - Steel, Parkerized finish. Retaining Screws - Steel, black oxide finish.

GEN. 2 MOD. 2 NON-ROTATING PIN SET - Identi-cal function as the standard sets listed above, but with ultra-low-profile links that protrude even less above the receiver. Available with standard .154" diameter pins or oversized .155" pins.SPECS: 416 stainless steel pins, carbon steel anti-rotation links and retaining screws, matte black finish. Kit includes hammer pin, trigger pin, (2) low-profile anti-rotation links, (2) screws, hex wrenches, and installation tool.#923-000-046AV .154" Gen. 2 Mod. 2 Non-Rotating Pin

Set, 3B25E25 � � � � � � � � � � � � � � � � � � � � � � $ 28.99#923-000-047AV .155" Gen. 2 Mod. 2 Non-Rotating Pin

Set, 3B25M34 � � � � � � � � � � � � � � � � � � � � � 28.99

M16/M4 NON-ROTATING SEAR PIN - Steel pin replaces original pin and locks into place against the take-down pin on M16/M4 rifles to prevent rotation and wear on receiver holes. Drop-in in-stallation requires no tools or gunsmithing.SPECS: Steel, matte black phosphate finish. Fits M16/M4 receivers only.#923-000-043AV M16/M4 Non-Rotating Sear Pin,

3B22I85 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.99

KNS PRECISION AR-15/M16

NON-ROTATING HAMMER & TRIGGER PINS

Precision-Machined To Upgrade Your Existing Hammer & Trigger Pins; Available

Standard & Oversized

#923-000-036AV AR-15 .154 Non-Rotating Locking Pins, 3B25G34 � � � � � � � � � � � � � � � � � � � � � �$ 28.99

#923-000-040AV AR-15 .155 Non-Rotating Locking Pins, 3B25I09 � � � � � � � � � � � � � � � � � � � � � � � 28.99

ab

ab

TriggerTech produces a trigger that drastically changes functionality by using a

roller. Other trigger designs play with pivots and polishing to try to attain the best break possible. TriggerTech uses patented Frictionless Release Technology™ that distinctly improves feel and accuracy. It uses rolling friction leading to unparalleled performance. Drop-in design for lowers with .154” pins. Adjustable - Short two-stage pull, zero creep release via TriggerTech's Frictionless Release Tech-nology™. Pull is adjustable from 2.5 to 5 lbs. with Enhanced Reset Control™ and sub .030" reset travel. Hammer, sear and trigger are all stainless steel and all other components are corrosion resistant. Fixed - Pull weights are factory set at the weights listed below.SPECS: Fits rifles with .154" hammer/trigger pin holes in lower receiver.

Super-Smooth Pull, Snappy-Crisp Release; Customize to Your Needs With

Adjustable & Fixed Pull Weights

#100-022-912AV TT-AR-15 Trigger Adj. 2.5-5 lb., Curved, 5E211N96 � � � � � � � � � � � � � � � � $ 239.99

#100-022-913AV TT-AR-15 Trigger Adj. 2.5-5 lb., Straight, 5E211P96 � � � � � � � � � � � � � � � � 239.99

#100-022-916AV TT-AR-15 Trigger Fixed 3.5 lb., Curved, 5E186C14 � � � � � � � � � � � � � � � � 214.99

#100-022-917AV TT-AR-15 Trigger Fixed 3.5 lb., Straight, 5E186F14 � � � � � � � � � � � � � � � � 214.99

#100-022-914AV TT-AR-15 Trigger Fixed 5.5 lb., Curved, 5E180M14 � � � � � � � � � � � � � � � � 199.99

#100-022-915AV TT-AR-15 Trigger Fixed 5.5 lb., Straight, 5E153F79 � � � � � � � � � � � � � � � � 199.99

TRIGGERTECH AR-15/M16

TRIGGERS

www.brownells.com/retro

Drops onto a standard AR-15 lower and offers a comfortable, er-gonomic shape with beveled and rounded edges that won't scrape your finger and guides it more easily to the trigger. Made of tough, reinforced molded polymer. Compatible with “duck-billed” style pistol grips. Pins included. ab#100-017-597AV Gunfighter Trggr Guard Mod 0, Blk,

1E6K65 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 6.95#100-017-598AV Gunfighter Trggr Guard Mod 0, FDE,

1E6H65 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6.95#100-017-599AV Gunfighter Trggr Guard Mod 0, Gray,

1E6F65 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6.95

Enhances Comfort & Trigger Access


BCMGUNFIGHTER® TRIGGER GUARD MOD 0

TR

IGG

ER

GU

AR

DS


brownells.com

72 Sig3 p33-48.indd 37 6/18/2019 11:34:01 AM


SINCE 1939

AR

-15

/M16

TR

IGG

ER

GU

AR

DS

Uniquely shaped, ma-chined aluminum triggerguard provides plenty of clearance to let you operate your rifle with gloves on during cold weather. Drop-in re-placement for the factory has an usual “bat wing” shape that helps your rifle stand out visually from the rest of the pack. Larger open-ing makes this an excellent companion modi-fication for use with the Phase 5 EBRv1 and EBRv2 extended bolt releases. Also fits the DPMS LR-308 and similar AR-style .308 rifles that use an AR-15 type triggerguard. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Steel roll pin and screw, black.

PHASE 5 TACTICAL AR-15/M16/AR-STYLE .308

WINTER TRIGGERGUARDProvides Extra Clearance For Gloved Fingers & Gives Rifle

A Truly Unique Look

#100-005-732AV Winter Triggerguard, 1C23L22 � � � � � � $ 25.00

Drop-in upgrade for AR-15 triggerguard provides an oversized opening for easy trigger access when wearing gloves. Also prevents finger from getting caught between trigger shoe and triggerguard, eliminating the need for a gap plug. Smooth contours and beveled edges won’t scrape finger or snag on other gear. Precision ma-chined from a solid billet of 6061 T6 aluminum and then hardcoat anodized for maximum durability. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black.


TACTICAL TRIGGERGUARDOversized Opening For

Easy Trigger Access; Prevents Finger Pinch

#965-000-102AV Tactical Triggerguard, 5F18D82 � � � � � $ 22.99

Aluminum triggerguard replaces factory guard and gives full access to the trigger,

even when you’re wearing gloves. Ends the complication of having to drop the triggerguard in cold weather environments in order to get to the trigger. Triggerguard gives you an oversized opening and is held in place with standard roll pins and set screws. Eliminates need for gap plug and works with most grips. abSPECS: Aluminum, matte black. Fits AR-15/M16 rifles. Includes roll pin and set screw.

MAGPUL AR-15/M16

ENHANCED TRIGGERGUARDKeeps Trigger Accessible,

Even With Gloves

#100-002-198AV M16/AR-15 Enhanced Triggerguard, 3K15N79 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 18.95

Drop-in replacement for factory trig-gerguard triggerguard fills the gap between the triggerguard and front of the pistol grip. Larger opening makes rifle easier to oper-ate when wearing winter gloves. Machined from solid aluminum billet for extra strength.

Unique machined flats enhance rifle’s appearance, too. abSPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. 2¼" (5.7cm) long, 5/8" (1.6cm) wide. Fits mil-spec AR-15/M16 lower re-ceiver.


BILLET TRIGGERGUARDEnlarged Triggerguard Accepts Gloved Finger

& Enhances Rifle’s Appearance

#100-011-246AV Billet Triggerguard, 8C18M03 � � � � � � � $ 18.99

Enhanced triggerguard has a shallow “V” shape that provides extra clearance for a shooter wearing gloves, and eliminates the gap at the rear of the USGI trig-gerguard that can trap or pinch finger. Smooth, ergonomically contoured surface and rounded edges protect the trigger finger from abrasion and won’t snag on the operator’s glove to impede the speed of target engagement. Replaces factory guard in minutes and requires no permanent alterations to receiver; reinstall original guard any time. Manufactured from high-grade, reinforced polymer that’s lightweight, almost as strong as aluminum, and resistant to heat, cold and moisture. Fits mil-spec AR-15/M16 and clones, as well as many AR-style .308 models; installation instructions included. abSPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. Includes roll pin, set screw, installation instructions. Fits most AR-15/M16 and AR style .308 rifles including ArmaLite® AR-10®, Knight SR-25, and DPMS LR-308. Due to variances in manufacturer specs, minor fitting may be required on some rifles.

MAGPUL AR-15/M16

MOE™ TRIGGERGUARDProvides Extra Clearance

When Wearing Gloves; Drop-In Installation

#100-004-156AV MOE Triggerguard, Black, 3K7B08 � � � � �$ 8.50#100-004-157AV MOE Triggerguard, Drk Earth, 3K7A08 � � 8.50#100-004-158AV MOE Triggerguard, ODG, 3K7C08 � � � � � 8.50#100-019-346AV MOE Triggerguard, Stealth Gray,

3K7N08 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8.50

Oversized, drop-in re-placement for factory trig-gerguard provides plenty of

extra room to get your finger on the trigger quickly, even when you’re wearing gloves. Comfortable, compound-curve shape helps prevent finger from being pinched between trigger pad and guard, while gently radiused edges protect finger from cuts or abrasions. Rugged, machined aluminum construction handles the abuse of intensive tactical operations. Installs easily using the original trig-gerguard’s plunger, spring and roll pins; compatible with factory and aftermarket pistol grips. abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Fits AR-15/M16 rifles with mil-spec lower receivers. Uses existing plunger, spring and roll pins.

AR-15/M16

TACTICAL TRIGGERGUARDFast, Unobstructed Access To Trigger; End Of Trigger

Pinch

#080-000-535AV Tactical Triggerguard, 8K17J79 � � � � � � $ 18.99

Heavy duty machined alu-minum triggerguard provides generous clearance for fast, unobstructed access to the trigger under any conditions, even when you’re wearing heavy win-ter gloves. Open geometry makes the trigger face easily accessible but protects the trigger finger from getting caught behind the trigger shoe. Extra-wide design has plenty of metal to protect the trigger from impact during rough handling or jostling inside vehicles. Ma-chined from the same lightweight yet ultra-hard 7075 T6 alumi-num alloy as many premium-quality AR-15 receivers, with smooth, rounded edges that won’t scratch or cut your hand. Evenly spaced holes reduce weight and give your rifle a distinctive appearance while preserving the structural strength of a solid piece of metal. abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black. Fits AR-15/M16 rifles with mil-spec lower receivers. Uses existing plunger, spring and roll pins. Instructions included.

AR-15/M16

OVERSIZED TRIGGERGUARDProtects Trigger During

Rough Handling & Allows Fast Access Even When

Wearing Gloves

#080-000-692AV Oversized Triggerguard, 8K22P59 � � � $ 24.99

All the factory-weight springs needed to finish building up a stripped lower receiver

or refurbish an existing lower to like-new function. Replace worn, corroded, or fatigued springs before they fail—inexpensive insur-ance against game-ending stoppages caused by spring failure dur-ing competition or tactical operations. Kit includes springs for trig-ger, hammer, disconnector, safety selector, magazine catch, bolt catch, buffer retainer, and takedown pin detents. abSPECS: Spring steel.

FALCON INDUSTRIES AR-15/M16

LOWER RECEIVER SPRING KITFinish A Stripped

Receiver Or Replace Worn, Fatigued, Or Corroded Factory

Springs

#573-000-053AV Lower Receiver Spring Kit, 3G4L65 � � � �$ 6.25

SPR

ING

S

Put the zing back into the rifle you thought was past its prime. Manufactured to precise tolerances, these high quality, replace-ment springs help keep your AR-15 functioning properly. Great for emergency spares or for assembling a parts rifle. Available singly, or in 3-paks. abSPECS: Materials and finish at least equal to OEM parts. Chrome silicon springs indicated by (CS).

AR-15/M16/M4 SPRINGS

Assorted Replacement Springs Restore Performance In Tactical Rifles

#078-101-113AV AR-15 A2 Action Spring (CS), each, 8G3C39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 3.99

#078-000-102AV AR-15 A2 Action Spring (CS), 3-pak, 8G6K99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

#078-101-112AV AR-15 A-2 Action Spring, each, 8G3A39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.99

#078-000-093AV AR-15 A-2 Action Spring, 3-pak, 8G6C99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

#078-101-114AV AR-15 Auto Sear Spring, each, 8G0J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99

#078-000-089AV AR-15 Auto Sear Spring, 3-pak, 8G2E39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99

#078-101-115AV Bolt Catch Spring, each, 8G2F39 � � � � � � 2.99#078-000-096AV Bolt Catch Spring, 3-pak, 8G2D39 � � � � � 2.99#078-000-099AV Bolt Gas Ring, 3-pak, 8G2C39 � � � � � � � � � 2.99#078-101-117AV AR-15 Buffer Retainer Spring, each,

8G0E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99#078-000-084AV AR-15 Buffer Retainer Spring, 3-pak,

8G2G39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#078-101-118AV AR-15 A2 Charging Handle Latch

Spring, each, 8G0B99 � � � � � � � � � � � � � � � � 1.99#078-000-094AV AR-15 A2 Charging Handle Latch

Spring, 3-pak, 8G3N39 � � � � � � � � � � � � � � � 3.99#078-101-119AV AR-15 Detent Takedown Spring, each,

8G0I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99#078-000-100AV AR-15 Detent Takedown Spring, 3-pak,

8G3N79 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.99#078-101-120AV AR-15 Disconnector Spring, each,

8G0H99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99#078-000-095AV AR-15 Disconnector Spring, 3-pak,

8G3E39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.99#078-101-121AV AR-15 Ejection Port Cover Spring, each,

8G0I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99#078-000-091AV AR-15 Ejection Port Cover Spring,

3-pak, 8G3P39 � � � � � � � � � � � � � � � � � � � � � � 3.99

#078-101-123AV AR-15 Ejector Spring (CS), each, 8G3E39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.99

#078-000-103AV AR-15 Ejector Spring (CS), 3-pak, 8G6E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

#078-101-122AV AR-15 Ejector Spring, each, 8G2L39 � � � 2.99#078-000-098AV AR-15 Ejector Spring, 3-pak, 8G3B99 � � 4.99#078-000-112AV AR-15 Elevation Index Spring A3,

3-pak, 8G2C39 � � � � � � � � � � � � � � � � � � � � � � 2.99#078-000-086AV AR-15 Extractor Spring, 3-pak,

8G5H99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6.99#078-101-125AV AR-15 Extractor Spring (CS), each,

8G3A39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.99#078-000-104AV AR-15 Extractor Spring (CS), 3-pak,

8G4E99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5.99#078-101-126AV AR-15 Forward Assist Spring, each,

8G0K99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99#078-000-080AV AR-15 Forward Assist Spring, 3-pak,

8G2C39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#078-101-127AV AR-15 Front Sight Detent Spring, each,

8G0H99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99#078-000-082AV AR-15 Front Sight Detent Spring, 3-pak,

8G2H39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#078-101-129AV M4 Action Spring, each, 8G3F99 � � � � � � 4.99#078-000-105AV M4 Action Spring, 3-pak, 8G8N99 � � � � � 9.99#078-101-130AV M4 Action Spring (CS), each, 8G3E99 � � 4.99#078-000-087AV M4 Action Spring (CS), 3-pak,

8G8L99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.99#078-101-132AV AR-15 Mag Catch Spring, each,

8G0J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99#078-000-083AV AR-15 Mag Catch Spring, 3-pak,

8G2P39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#078-000-090AV AR-15 Rear Sight Elev Knob Spring,

3-pak, 8G2B39 � � � � � � � � � � � � � � � � � � � � � � 2.99#078-101-136AV Trigger Spring, each, 8G2A39 � � � � � � � � � 2.99#078-000-088AV Trigger Spring, 3-pak, 8G3M99 � � � � � � � � 4.99#078-000-097AV AR-15 Triggerguard Spring, 3-pak,

8G1I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#078-101-137AV AR-15/M16 Hammer Spring, each,

8G2G39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#078-000-077AV AR-15/M16 Hammer Spring, 3-pak,

8G3G99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.99#078-000-092AV M16 Clutch Spring, 3-pak, 8G2A39 � � � � 2.99#078-101-128AV M16/M4 Burst Fire Hammer Spring,

each, 8G1N99 � � � � � � � � � � � � � � � � � � � � � � � 2.99#078-000-081AV M16/M4 Burst Fire Hammer Spring,

3-pak, 8G2A99 � � � � � � � � � � � � � � � � � � � � � � 3.99

72 Sig3 p33-48.indd 38 6/18/2019 11:34:05 AM

AR

-15/M

16


brownells.com

Genuine Mil-spec AR-15 replacement springs on handy blister pak cards. Kit contains one each of springs for: trigger, hammer, ejector, extractor, bolt catch, disconnector, selector, takedown pin detent, (2) mag catch, front sight, ejection cover, forward assist. ab

DPMS AR-15 SPRING KIT

#231-015-002AV AR-15 Spring Kit, 3B8L13 � � � � � � � � � � � $ 10.29

Lighter springs provide a 3.5 lb. trigger pull when used with JP triggers, and a pull of 4.5 to 5 lbs. when used with standard trigger compo-nents. Includes hammer spring, trigger return spring, and discon-nector spring. Installation instructions also explain engagement surface polishing to obtain a smooth, reliable trigger. abSPECS: Steel, yellow-coded hammer and trigger springs.


REDUCED-POWER SPRING KITGives A Smooth, Light

Trigger Pull

#452-000-007AV JPS3.5 Reduced-Power Spring Kit, 2E9K39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 10.49

Prec i s ion-ca l ib ra ted springs give produce a con-sistent 3.5 to 4 lb. pull on a

stock JP M15 rifle trigger, while preserving ignition reliability with U.S.-manufactured ammunition. Can also be used with properly prepared (instructions included) mil-spec trigger/hammer compo-nents to produce a 4- to 5-lb. pull with a smooth “roll off” feel and good control. abSPECS: Spring steel. Kit includes red-coded hammer spring, yellow-cod-ed trigger return spring, and disconnector spring. Not for use on AR-style .308 rifles; not for defense or duty applications.


JPS3.5T ENHANCED RELIABILITY SPRING KIT

For Smooth, Light Trigger Pull & Reliable Ignition

#452-000-104AV Enhanced Reliability Spring Kit, 2E10E51 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 10.99

Specially-engineered spring is designed to optimize perfor-mance of AR-15s with 16" barrels chambered for .300 AAC Blackout and carbine-length gas systems. Specifically helps produce reliable function with sub-sonic ammunition. An effective and easy way to cure short cycling in under-gassed guns. abSPECS: 17-7 stainless steel.

NEMO ARMS AR-15/M16

.300 AAC BLACKOUT CARBINE BUFFER SPRING

Reduced Power Spring For Sub-Sonic Loads

#100-011-674AV .300 BLK Buffer Spring, 6C14I93 � � � � �$ 15.99

Stronger spring prevents “extractor bounce” during rapid semi-auto or full-auto fire. Provides ex-

tra force against case rim to give AR-15 rifles and carbines reliable extraction from a dirty chamber; ensures fired case is completely extracted and ejected from gun. Recommended for use with black, carbine, extractor spring insert. ab

WOLFF AR-15/M16

EXTRA POWER EXTRACTOR SPRINGImproves Extraction & Ejection Reliability

#969-000-032AV AR-15/M16 XP Extractor Spring, 3-pak, 9F9N44 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 12.19

Tool box comes with 20 each of the springs required by the fol-lowing AR-15 lower receiver com-ponents: bolt catch, buffer retainer, trigger, hammer, disconnector, magazine release, selector and se-lector detent. Ideal for department armorers, gun shops and gun-smiths, or anyone else who works on, builds or repairs large numbers

of AR-15s. Clear plastic box makes it easy to see the spring you need before you open the lid. Separate compartments to keep springs organized.

STRIKE INDUSTRIES AR-15/M16

LOWER RECEIVER BULK SPRING KITPlenty Of Springs For High-

Volume Users

#100-014-131AV Lower Receiver Bulk Spring Kit, 2H71Q68 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 75.99

Three-spring kit lightens trigger pull and smoothes letoff. Drops in, requires no modifications to gun. abSPECS: Stainless steel, spring steel. Kit includes hammer, trigger, and dis-connect springs. Fits AR-15/M16.

TTI INTERNATIONAL CUSTOM SHOPPE AR-15/M16

REDUCED POWER ACTION KITLighten AR-15/M16

Trigger Pull

#989-000-001AV Reduced Power Action Kit, 9H4K50 � � � $ 7.09

Extra-strong extractor spring increases extrac-tor’s grip on case groove and helps ensure reliable, complete extrac-tion. Especially effective for improving reliability of an AR 15 style carbine, pistol, or short barreled rifle (SBR) where a weak extractor spring can cause extractor lift, leading to failure to fully extract the spent case before the fresh round is fed from the magazine, re-sulting in a stoppage. Heavy-grade, high-quality spring steel and a proprietary heat-treating process ensure long service life with less weakening over time than ordinary springs. abSPECS: Tempered spring steel. Fits all AR-15/M16/M4-style rifles, car-bines, and pistols.

AFM AR-15/M16

HEAVY DUTY EXTRACTOR SPRINGFor Positive, Consistent Extraction

Even On Carbines & SBRs

#100-004-041AV Heavy Duty Extractor Spring, 2C3J50 � � $ 5.79

Stainless steel carbine buffer spring manufactured to MIL-S-1357 specification for replacement on rifles with M4-type receiver ex-tension tube for collapsible carbine buttstock. Replace a fatigued spring, or use as part of the rifle-to-carbine stock conversion. Cold drawn to ASTM A313 standard for heat- and corrosion-resistance, and case hardened for improved resistance to surface wear. abSPECS: 631 stainless steel. Fits AR-15/M16 rifles chambered in .223/5.56mm with M4-type receiver extension for collapsible buttstock.

DPMS AR-15/M16

CARBINE BUFFER SPRING

Manufactured To Military Specifications For Long-Lasting Service

#231-000-261AV Carbine Buffer Spring, 1C5G99 � � � � � � � $ 6.99

Durable, steel springs provide extra hammer power to ensure proper igni-tion. Replaces factory spring. abSPECS: Steel. Approximately 23/32" (18.2mm) wide, 2" (5.1cm) long.

WOLFF AR-15/M16

EXTRA-POWER HAMMER SPRINGHelps Eliminate Common Ignition

Problems; Great When Using Ammo With Hard Primers

#969-000-100AV XP AR-15 Hammer Spring, 9F4D29 � � � � $ 5.19#969-000-101AV XP AR-15 Hmr Spring, 3-pak, 9F10G31 � � 14.19#969-000-102AV XP AR-15 Hmr Spring, 10-pak,

9F24M29 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 30.99

Flat music wire buffer spring delivers 7% more compression tension than a factory-spec spring for a longer operating lifespan, more reliable cycling, and elimination of the “raspy” noise during cycling. After extensive testing, the folks at JP concluded that the extra power produces a faster, more controllable recoil impulse and enables the weapon to press fully into battery with even with a lot of fouling present. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. abSPECS: Steel, polished finish. Rifle – 131/4" (34cm) long. Fits fixed stock rifles with A1/A2 buffer tube. Carbine – 113/4" (30cm) long. Fits carbine buffer tube for M4-type collapsible stocks.


TUNED BUFFER SPRING

Extra Power For Smoother, Quieter, More Reliable Cycling

#452-000-118AV Tuned Buffer Spring, Rifle, 2E18N01 � � �$ 18.99#452-000-119AV Tuned Buffer Spring, Carbine, 2E18I01 � � 18.99

These flat wire, high-quality action/buffer springs from cham-pion shooter David Tubb will perform flawlessly and are duty rated for 500,000 compression cycles at maximum performance. Made to “extra pwer” specs without the extra material, these springs are surprisingly lightweight, yet extremely durable. Gives correct timing and resistance on the recoil stroke and a controlled reboujnd en-sures reliable feeding with consistent forward thrust on every shot. Keeps the bolt locked a little longer to allow pressure more time to subside for perfect cycling. abSPECS: Chrome silicon steel. AR-15 fits both fixed and collapsible stocked AR-15 rifles and carbines without modification to spring or gun. AR-308 fits standard-length AR-style .308 rifles only.

AR-15/CAR-15 EXTRACTOR/EJECTOR SPRING SET - Replace-ment, drop-in fit chrome silicon extractor and ejector springs from David Tubb provide long term durability and up to 80% more power than factory springs in AR-15 rifles. Precision manufacturing and high quality steel give extremely consistent compression cycle for smooth operation over thousands of rounds.SPECS: Chrome silicon steel.#840-000-051AV CS Ext./Ejector Sprg Set, 4H11J83 � � � � $ 17.49

SUPERIOR SHOOTING SYSTEMS AR-15/CAR-15/AR-STYLE .308

CHROME SILICON SPRINGS

Flat Wire Construction For Maximum Reliability & Performance

#840-000-048AV AR-15 CS Buffer Spring, 4H21G01 � � � �$ 25.99#840-000-047AV AR-Style .308 CS Buffer Sprg, 4H24E46 � � 28.99

ab

High-quality, reduced power, action spring helps cure feeding problems caused by excessive bolt “bounce” in fixed-stock rifles configured for 3-shot burst or full-auto modes of fire. Helps shoot-ers fine-tune action cycling for light, target/varmint loads in semi-auto rifles. abSPECS: Tempered, spring steel. Fits .223 cal. AR-15/M16 rifles with fixed A1/A2 rifle stocks. Not for use in adjustable stock carbines.

WOLFF AR-15/M16

REDUCED POWER ACTION SPRING

Helps Reduce Bolt “Bounce” For Improved Feeding

#969-000-140AV Reduced Power Action Spring, 9F11C04 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 13.99

Luth-AR recoil buffer springs are spiral-wound, compression-type springs that provide the necessary power to cycle the recoil buffer efficiently and keep your AR running smoothly. Other manu-facturers offer exotic springs, "extra power," and whatnot - Luth focuses on producing standard mil-spec, spiral-wound, tempered stainless steel springs with neat "finished" ends that provide exactly the right amount of spring force your AR-15 rifle or carbine was designed to operate most efficiently with. "If it ain't broke, why fix it," right? Separate models for AR-15 and AR-style .308s, and separate carbine (for guns with M4-style adjustable stocks) and rifle (fixed A1/A2-type stocks) buffers. ab


RECOIL BUFFER SPRINGS

High-Grade Springs Help Your Rifle Cycle Reliably

#100-028-015AV AR-15 Rifle Buffer Spring, 3D3L12 � � � � �$ 3.74#100-028-014AV AR-15 Carbine Buffer Spring, 3D3B68 � � 4.69#100-028-025AV AR-308 Rifle Buffer Spring, 3D00AJM � � 6.53#100-028-026AV AR-308 Carbine Buffer Spring, 3D5J30 5.63

SPR

ING

S

#969-165-000AV AR-15/M16 Rifle XP Buffer Spring, 9F10M96 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 12.89

#969-165-010AV AR-15/CAR-15 Carbine XP Buffer Spring, 9F11J51 � � � � � � � � � � � � � � � � � � � � � 14.39

Extra-power (XP) action/buffer spring improves reliability and function. Has just a little extra oomph to cycle the action when more fouling is present than is optimal because you're a bit behind on your cleaning regimen. Rifle spring fits AR-15 chambered in .223 with A1/A2 rifle buffer system; Carbine fits rifles and carbines chambered in .223 with M4-type receiver extension. ab

WOLFF AR-15/M16

EXTRA-POWER BUFFER SPRINGS

Extra Juice to Keep the Action Cycling Reliably Even When It's Dirty

72 Sig3 p33-48.indd 39 6/18/2019 11:34:09 AM

AR

-15

/M16


SINCE 1939

RE

CO

IL B

UFF

ER

S

Extra weight extends dwell time and slows down the cycling of the rifle for more reliable cy-

cling in rifles with short gas systems. Also helps soften felt recoil and reduces bolt bounce in full-auto fire. Designed for use in rifles with M4 carbine-type receiver extension (buffer) tube and carbine buffer spring. An easy, fast way to fix cycling problems! abSPECS: Aluminum exterior with Tunsten and steel weights inside. H2 is 4.6 oz.; H3 is 5.4 oz. Replaces standard M4-type carbine buffer; must be used with a carbine buffer spring.

COLT AR-15/M16 HEAVY BUFFERHelps Rifle Cycle Reliably

#160-307-200AV H2 Heavy Buffer, 6A32C61 � � � � � � � � � � $ 38.99#160-000-394AV H3 Heavy Buffer, 6A38M62 � � � � � � � � � 45.99

Heavy 3.5 oz. buffer fits M4-style carbine buffer tubes and adds extra weight to help promote reli-able function with short gas sys-tems. Also helps reduce bolt bounce during full-auto fire. Reduces felt recoil slightly. Not for use in A1/A2 style rifle buffer tubes. ab

Helps Improve Reliablity For Short Gas Systems

#231-000-358AV Heavy Buffer, 1C23L23 � � � � � � � � � � � � � �$ 31.99

DPMS AR-15/M16 HEAVY BUFFER

Carbine-size, 3 oz. recoil buf-fer delivers enhanced reliability and smooth cycling. With three steel weights encased in an anodized aluminum housing, this low-mass buffer ensures the bolt carrier consistently travels fully to the rear. Fits any AR-15/M16 with receiver extension (buffer tube) for M4-style adjustable buttstock. abSPECS: Anodized aluminum housing, polymer cap. 3 1/4" (8.3cm) OAL. 3 oz. (85g) wt. #274-000-023AV Standard Weight Carbine Recoil

Buffer, 4G9A89 � � � � � � � � � � � � � � � � � � � � $ 12.39

Standard Weight Buffer Replaces Or Upgrades Worn Part

D.S. ARMS AR-15/M16

CARBINE RECOIL BUFFER

Genuine DPMS factory parts will help you repair an existing rifle or correctly install a stock on a custom

build. Buffers and springs are weighted to function properly in DPMS LR-308 and Remington R-25 rifles. Buffer and spring are sold sepa-rately. Rifle Buffer and Spring fit buffer tube for fixed, A2-type rifle stock; will not work in carbine tube. abSPECS: Carbine Buffer – Steel body. 21/2" long. 3.7oz. wt. Rifle Buffer – Aluminum body. 47/8" long.

Correct-Weight Buffer for Your .308 Carbine or Rifle

#231-000-278AV Carbine Buffer, Only, 1C25Q22 � � � � � � $ 29.99#231-000-277AV Carbine Buffer Spring, Only,

1C4L99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.89#231-000-276AV Rifle Buffer, Only, 1C17N50 � � � � � � � � � 20.59#231-000-275AV Rifle Buffer Spring, Only, 1C7K30 � � � � 9.29

DPMS AR-STYLE .308 BUFFERS

The heavy FM-45 buffer weighs 8 oz. for use in "AR-45"

pistols and PCCs chambered in .45 ACP. This is the correct weight to ensure your blowback operated, pistol-caliber AR-15 cycles re-liably and smoothly. Extended-length buffers do not require any spacers, plus it helps prevent bolt catch breakage. Internal Tungsten weights help cut down “bolt bounce” and improve reset on trig-ger. A salt bath Nitride Melonite/QPQ finish enhances lubricity and wear-resistance. ab

FM PRODUCTS AR-15

PISTOL CALIBER BUFFERS

#100-035-371AV FM-45 Ex-Hvy Pistol Buffer, 6D36F50 � � $ 36.50

Keeps Your AR Pistol or PCC Cycling Smoothly - With Less Felt Recoil

The Foxtrot Mike Products Heavy Pistol Buffer is the correct weight to ensure reliable cycling of any blow-back operated AR-15 pistol action. With its extended length, this buffer requires no spacer and helps prevent bolt catch breakage. By installing this buf-fer, you’ll enjoy smoother function, less felt recoil, and reduced rate of fire from your AR pistol. Compatible with any carbine bufer tube and all blow-back 9mm upper receivers. Salt bath Nitride Melonite/QPQ finish gives lubricity and wear-resistance. Heavy 6.5 oz. (pistol) weight is one full ounce heavier than a Colt H3 buffer! Foxtrot Mike’s buffer is the secret ingredient to make your AR-15 pistol reliable and smooth-cycling. ab

FM PRODUCTS

FM-9 EXTRA-HEAVY PISTOL BUFFER

#100-024-850AV AR-15 Hvy 9mm Pistol Buffer, 6D18E29 � � $ 20.00

Aids in Reliable Cycling of Pistol Caliber Carbines

Drop-in replacement for factory buffer shortens stroke and re-duces recoil on pistol caliber AR-15 conversions with collapsible M4 carbine-type stocks. Extra weight behind carrier reduces cyclic rate for improve controllability, feeding, and extraction on full-auto carbines. Self-contained unit with long head consists of long-wear-ing, precision-machined, cold-rolled Parkerized steel exterior, fully enclosed 8 oz. lead insert, and polyurethane bumper. Will not work with rifle caliber uppers. Installation of this buffer is mandatory on Cavalry Arms CAV-15 Mk II receivers converted to .45 ACP with the Hahn Precision Grease Gun Adapter to prevent elongation of the receiver hole that eventually renders rifle unusable. abSPECS: Cold-rolled steel exterior, Parkerized, matte dark gray; lead in-sert; polyurethane bumper. 311/16" (9.4cm) long. Fits rifles and carbines with pistol caliber upper receiver and collapsible M4 carbine-type stock.

Reduces Recoil, Improves Controllability, Extends Receiver

Life

#100-002-513AV Pistol Caliber AR-15 Buffer, 6K59L23 � �$ 67.99

HAHN PRECISION AR-15/CAR-15/CAV-15

PISTOL CALIBER BUFFER

Short carbine-style buffer enables installation of an M4-style adjustable AR-15 stock on an AR-style .308 rifle. Correct weight to ensure proper bolt movement and reliability for .308 rifle. For maximum reliability, use with 308 Carbine Buffer Spring, sold separately below. Fits AR-308 rifles from ArmaLite, CMMG, DPMS, Remington, Knight’s Armament, LMT, Larue, Patriot Ordnance Fac-tory, Mega, and Fulton Armory. Not for use in early Rock River Arms, Bushmaster, or any AR-308 that uses an FAL magazine. Use with M4/CAR-type carbine collapsible stock receiver extension tubes only; not for use in any rifle-length extension tube. abSPECS: 303 stainless steel with tungsten internal weight. 5½ oz. wt.

HEAVY BUFFERS CAR-10 RECOIL BUFFER

#100-007-353AV CAR-10 Recoil Buffer, 9B105C36 � � � $ 123.99#100-007-354AV 308 Carbine Buffer Sprg, 9B17N37 � � 19.99

Lets You Put An AR-15 Collapsible Stock On Your AR-308

Drop-in captured-spring recoil system helps your AR func-tion more smoothly and quieter without any permanent modifications. The carefully balanced, custom-ground buffer spring, combined with the JP LMOS buffer, greatly reduces friction and vibration - say goodbye to the annoying “spoon over a cheese grater” noise of conventional springs and buffers. Fits buffer tubes for both M4-style collapsible stocks and also, using the included spacer, the longer tubes for fixed rifle stocks. Heavy Mass (H) models are optimized for short-barreled rifles (SBRs), suppressed weapons, rifles that use an H2/H3 buffer, select-fire rifles, and piston-operated rifles. Auxiliary Spring Rate Kit allows you to fine tune the JP Silent Captured Spring System. Simply replace the original JPSCS spring with a slightly different spring rate from the kit to get the optimum performance from your rifle. Ideal for rifles without an adjustable gas block. Extra spring packs sold separately. abSPECS: Stainless steel and hard polymer. 7" OAL. Nylon spacer – 15/8" long. Instructions included. JPSCS-15/-15H fit AR-15/M16/M4. JPSCS-10/-10H fit AR-style .308 rifles, including DPMS LR-308, ArmaLite® AR-10®. Does not fit Rock River Arms LAR-8. JPSCS-9MM fits AR-15s chambered in 9mm Luger. Requires an open channel in bolt assembly for guide rod to pass during fire. For most bolts this requires removing the pinned-in central mass. Bolt must retain its full length with mass removed. JPSCS-PACK15 contains five spring weights: 80, 85, 90, 95, 100. JPSCS-PACK10 contains three spring weights: 100, 105, 110.

Eliminates Annoying, Raspy Buffer & Spring Noises

#452-000-209AV AR-15 JPSCSS Gen2, 2E130C51 � � � � �$ 139.95#452-000-210AV AR-15 JPSCSS Gen2 w/Aux Spring

Kit, 2E158E48 � � � � � � � � � � � � � � � � � � � � � 169.95#452-000-211AV AR-15 JPSCSS Gen2 w/H2 Buffer,

2E165N75 � � � � � � � � � � � � � � � � � � � � � � � � � 176.95#452-000-212AV AR-15 JPSCSS Gen2 w/H2 & Aux

Spring Kit, 2E193I89� � � � � � � � � � � � � � � � 206.95#452-000-213AV AR-308 JPSCSS Gen2, 2E130A51 � � � � 139.95#452-000-214AV AR-308 JPSCSS Gen2 w/Aux Spring

Kit, 2E149L16 � � � � � � � � � � � � � � � � � � � � � � 159.95#452-000-215AV AR-308 JPSCSS Gen2 w/H2 Buffer,

2E165N75 � � � � � � � � � � � � � � � � � � � � � � � � � 176.95#452-000-216AV AR-308 JPSCSS Gen2 w/H2 & Aux

Spring Kit, 2E184A52 � � � � � � � � � � � � � � � 196.95#452-000-217AV AR-15 JPSCSS Gen2 for 9mm,

2E149L16 � � � � � � � � � � � � � � � � � � � � � � � � � � 159.95


JPSCS SILENT CAPTURED SPRING SYSTEM GEN2

The Geissele Super 42 Spring improves the function and reli-ability of your AR-15 pattern rifle. Its unique spring design uses three independent strands of wire, just like the German MG42 Machine Gun, making it act as a harmonic damper and energy absorber by al-lowing the springs to flex separately from each other. This flex helps displace excess energy which decreases the chance of spring failure and assists with making your AR-15 more reliable. ab


SUPER 42 BUFFER & BRAIDED WIRE SPRING

Tough, Durable Spring Enhances Rifle's Reliability

#100-020-750AV Super 42 Braided Wire Spring & Buffer, 7B65L00 � � � � � � � � � � � � � � � � � � � �$ 65.00

Lightweight, aluminum alloy buffer reduces the reciprocating mass of the operating system to reduce the overall recoil impulse felt by the shooter. Helps the competitive shooter keep the sights on the target for precise follow-up shot placement and tight groups. Designed for competition rifles with full-length receiver extension tubes and lightweight titanium or aluminum alloy bolt carriers, as well as any conventional mil-spec carrier where reduced mass is desired. Combine with a lightweight carrier to virtually eliminate felt recoil and increase bolt velocity without significantly impairing reliability. abSPECS: Aluminum, anodized, red. 3 oz. (86g) wt. Fits AR-15 chambered in .223/5.56mm with rifle-length receiver extensions for fixed buttstock. For competition only; not recommended for duty weapons.

Reduces Recoil Impulse For Precision Competitive Shooting

#452-000-063AV Low-Mass Recoil Buffer, 2E54N04 � � � $ 56.99


LOW-MASS RECOIL BUFFER

The KynSHOTTM damper is a drop-in replacement for your rifle's standard recoil buffer that uses an internal hydraulic system to reduce felt recoil. Makes your rifle more comfortable to shoot, easier to control, with less muzzle rise on each shot - for better shot-to-shot ac-curacy and tighter groups. The KynSHOT also slows cyclic rate on full-auto rifles, allowing the shooter to con-serve ammunition, while decreasing wear and tear on the gun. Easy installation requires no permanent modifications to your rifle; switch back to the standard buffer any time. Made of high-grade stainless steel throughout, with a slick, high-polish finish that aids in lubricity and won't attract dirt and fouling. Permanently sealed to keep the high-performance hydraulic oil inside, where it belongs. Oil is formulated to maintain optimal performance through a wide range of temperature extremes. abSPECS: 17-4 stainless steel, sealed hydraulic cylinder. High-impact striker cap. Nickel-plated cylinder rod. AR-308 Shorty Carbine fits DPMS M4-style AR-308 stocks that use a 2.5" buffer. DO NOT USE ON Armalite® AR-10®, as damage to upper and lower receivers can occur. AR-308 Standard Carbine fits Armalite AR-10 carbine. Does not fit shorter DPMS carbine tubes.

AR-308 Fixed Stock Recoil Damper

AR-15 Fixed A1/A2 Stock Recoil

Damper

AR-15 Carbine Recoil DamperReduces Felt Recoil & Helps

Keep You On Target

KYNTEC AR-15/M16/AR-STYLE .308

KYNSHOT RECOIL DAMPER

#100-014-774AV AR-15 Carbine KynSHOT, 3C112N79 � � � � � � � � � � � � � � � � � � � � � � $ 119.99

#100-014-775AV AR-15 Fixed A1/A2 Stock KynSHOT, 3C127G63 � � � � � � � � � � � � 134.99

#100-014-777AV AR-308 Standard Collapsible Stock KynSHOT, 3C123F58 � � � � � � 129.99

#100-014-776AV AR-308 Shorty Collapsible Stock KynSHOT, 3C121J81 � � � � � � � � � � � � 129.99

#100-014-778AV AR-308 Fixed Stock KynSHOT, 3C127B63 � � � � � � � � � � � � � � � � � � � � � � 134.99

100-033-218AV AR-9 9mm PCC KynSHOT, 3C00GPP � � � � � � � � � � � � � � � � � � � � � � � 127.95

Item

72 Sig3 p33-48.indd 40 6/18/2019 11:34:14 AM

AR

-15/M

16


brownells.com

RE

CO

IL BU

FFER

S

Low-friction Delrin disk fits on the end of the buffer spring, op-posite the buffer, and stops the annoying “twang” of the buffer hitting the rear of the receiver extension during recoil. Quick, easy instal-lation, with no permanent alterations to gun. Simply remove buffer and spring, insert Twang Buster, then reinstall buffer and spring. abSPECS: Machined Delrin thermoplastic, black. Fits A2 rifle and M4-style carbine buffer spring/receiver extension tubes.


TWANG BUSTERStops Annoying Buffer Noise During Recoil

#100-005-392AV Twang Buster, 2Z4N86 � � � � � � � � � � � � � � �$ 5.99

High-strength polymer part protects expensive buffers and bolt carriers for a fraction of their cost. Round disc adheres to the buf-fer and eliminates metal-to-metal contact between the bolt carrier and buffer. abSPECS: Polymer, white. .95" (24mm) diameter, .065" (1.7mm) thick.

M16 CLINIC AR-15/M16/AR-STYLE .308

AR BUFFER PADPrevents Battered Buffers & Carriers;

Simple, Stick-On InstallationBuffer not included

#100-001-469AV AR-15/AR-308 Buffer Pad, 6K4P72 � � � �$ 6.79

Replacement buffer slows down recoil two ways to improve ac-curacy and control. Extra weight lowers velocity for less wear on your bolt and receiver. Internal spring compresses absorbs additional recoil before it hits your shoulder. As a bonus, a D-Fender D-Ring is included to improve extractor spring tension on your AR-15/M16. abSPECS: Steel, black, matte finish. 3/4" (19mm) tube diameter, 31/2" (9cm) long. Rifle includes polymer extension tube.

MGI MILITARY AR-15/M16/M-4

RATE REDUCING BUFFERReduces Bolt & Receiver Wear; Absorbs

Recoil For Improved Accuracy

#741-000-003AV Rifle Rate Reducing Buffer, 1D177P99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 196.99

#741-000-004AV Carbine Rate Reducing Buffer, 1D199G99 � � � � � � � � � � � � � � � � � � � � � � � � 221.99

Machined aluminum recoil buffer comes in three weights, so you can select the buffer that gives the best combination of recoil control and reliability in your carbine with an M4-type adjustable stock. All have a mil-spec polyurethane bumper, durable hard-anodized finish, and the Spike’s logo. ST-T1 is a standard-weight (3 oz.) buffer filled with low-density tungsten powder (LDTP) that eliminates the noise and shock caused by the hard reciprocating weights found in the original-style factory buffer. Aids in smoother cycling and helps minimize bolt bounce. ST-T2 is filled with high-density tungsten powder (HDTP) for extra weight (4.1 oz.) behind the carrier to reduce cycle rate. Help you stay on target in rapid-fire semi-auto operation and improves controllability in full-auto. ST-T3 gives the most aggressive reduction of felt recoil and bolt bounce with ultra-dense tungsten bar stock weights inside (5.4 oz.) for maximum recoil control in full-auto mode, suppressed weapons, or rifles that suffer from overgassing. abSPECS: Aluminum, hardcoat anodized, black. Polyurethane bumper. 31/4" (8.2cm) long. ST-T1 – 3 oz. (85g) wt.; ST-T2 - 4.1 oz. (117g) wt.; ST-T3 – 5.4 oz. (153g) wt. Fits AR-15 carbines with M4-type collapsible stock only.


CARBINE RECOIL BUFFERSHelps Control Felt Recoil & Bolt

Bounce

#100-008-580AV ST-T1 Std Weight Buffer, 3B27K11 � � � �$ 32.99#100-006-812AV ST-T2 Heavy Buffer, 3B00HND � � � � � � � 34.99#100-008-581AV ST-T3 Extra-Heavy Buffer, 3B37I17 � � � � 41.99

Constructed from Grade 5 Titanium, V Seven's buffer re-tainer is 100% non-corroding, with a stainless steel that's

highly corrosion resistant, so you never have to worry about this small but critical part giving out and leaving you in the lurch. All this strength, yet it weights a mere 1.1 grams - one-half the weight of the standard part. Fully compatible with mil-spec lower receivers. ab


TITANIUM BUFFER RETAINERWon't Fail Due to Corrosion

#100-500-041AV AR-15 Buffer Retainer Ti Raw, 7G7P76 � �$ 7.76

Due to the AR-15's sensitive direct impingement operating system, a recoil buffer of the wrong weight can seriously hose up the reliability and cyclic smoothness of your rifle or carbine. That's why Luth-AR offers direct replacement buf-fers designed to work in a variety of AR configurations. They work with factory recoil springs to cushion carrier impact, lessen felt re-coil, and minimize the overall beating your rifle and optics endure when shooting. These buffers have aluminum alloy bodies with shock-absorbing synthetic material on the tip and sliding tungsten or steel weights inside. If you're having trouble getting your rifle to cycle reliably, the solution may be as simple (and inexpensive) as changing the buffer! Rifle buffers are available for both AR-15/M16 and AR-style .308 platforms. AR-15 carbine buffers are available in several "flavors," including the Standard weight (3.2 oz.), plus three heavier weights: H1 with 1 tungsten and 2 steel weights (4 oz.), H2 with 2 tungsten and 1 steel (4.8 oz.), and H3 weighing in at 5.6 oz. (3 tungsten inside). The AR-308 Carbine buffer is 2.485" long and weighs 3.8 oz., and the AR-308 Rifle buffer (51/4" long) is 5.4 oz. ab


RECOIL BUFFERS

Get Exactly the Right Buffer Weight for Reliable Bolt/Carrier Cycling

#100-028-016AV AR-15 Rifle Buffer, 3D16F05 � � � � � � � � � $ 20.63#100-028-017AV AR-15 Standard Carbine Buffer,

3D10A78 � � � � � � � � � � � � � � � � � � � � � � � � � � 13.15#100-028-018AV AR-15 Heavy Carbine H1 Buffer,

3D23E60 � � � � � � � � � � � � � � � � � � � � � � � � � � 30.07#100-028-019AV AR-15 Double Tungsten H2 Buffer,

3D34P97 � � � � � � � � � � � � � � � � � � � � � � � � � � 41.35#100-028-020AV AR-15 Triple Tungsten H3 Buffer,

3D44P19 � � � � � � � � � � � � � � � � � � � � � � � � � � 52.63#100-028-027AV AR-308 Rifle Buffer, 3D26E44 � � � � � � � 31.91#100-028-028AV AR-308 Carbine Buffer, 3D31C10 � � � � 37.55

Rifle

Carbine

Small hardened steel pin fits inside the lower receiver to capture the buffer and buffer spring. Parkerized steel part; fits all makes and models of AR-15/AR-style .308, rifles, carbines, fixed stocks, adjustable M4-stocks - you name it, all these ARs need this pin to keep the buffer where it belongs. A small nub on the upper surface retains the buffer, while a recess in the bot-tom accepts the retainer spring (spring sold separately, below). ab

Keeps the Buffer & Spring Where They Belong - in the Buffer Tube

100-028-034AV AR-15 Recoil Buffer Retainer, 3D1H15 � �$ 1.69#078-101-117AV AR-15 Buffer Retainer Spring, each,

8G0J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99

LUTH-AR AR-15/M16

RECOIL BUFFER RETAINER

PWS carbine buffers come in a variety of weights to accommodate the many

new calibers and styles of AR-pattern firearms now being produced, custom-built, and/or modified by Black Rifle (and Pistol) fans. These buffers are made of heavy 4140 carbon steel with a fluted surface to that helps prevent debris from jamming up the buffer's movement. Also reduces the physical contact area between buffer and inside of the receiver extension (aka buffer tube) to promote faster, more reliable cycling. The black finish is an FNC LIFE HD treatment with lubrication chemically bonded in it to further ensure smooth, easy movement of the buffer. Choose the weight that gets your carbine/pistol/SBR cycling reliably: H2 (4.4 oz.), H3 (5.1 oz.), H4 (6.8 oz.), AR-308 Short H2 (4.4 oz.), and Extended 9mm PCC for AR pistol, pistol caliber carbine or SBR (6.3 oz.). H4 provides excellent weight for use with sound suppressors. ab

PRIMARY WEAPON SYSTEMS AR-15/AR-308

ENHANCED STEEL-BODY CARBINE BUFFER

Get the Right Buffer Weight To Do the Job Reliably!

#100-031-926AV 5.56 Carbine H2 Recoil Buffer, 4B31E83 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 33.99

#100-031-929AV 5.56 Carbine H3 Recoil Buffer, 4B28Q70 � � � � � � � � � � � � � � � � � � � � � � � � � 29.99

#100-031-930AV 5.56 Carbine H4 Recoil Buffer, 4B41C07 � � � � � � � � � � � � � � � � � � � � � � � � � 42.99

#100-031-927AV 9mm PCC Ex-Length Recoil Buffer, 4B41A07 � � � � � � � � � � � � � � � � � � � � � � � � � 42.99

#100-031-928AV .308 Short H2 Recol Buffer, 4B79F61 � � � � � � � � � � � � � � � � � � � � � � � � � � 84.99

CH

AR

GIN

G H

AN

DLE

S

Sometimes you need fancy, sometimes basic is right for the job. Our economically priced standard AR-15 charging handle is machined from 6061 T6 aluminum, and has a durable matte black anodized finish. Insert it into your rifle, pull back and chamber a round - what could be simpler? ab

Basic Mil-Spec Style Charging Handle Gets the job Done

#078-101-153AV AR-15 Charging Handle, 3C18E19 � � � $ 19.99

AR-15/M16

STANDARD CHARGING HANDLE

Easy-to-build kits con-tain all the components needed to assemble a tac-tical charging handle that aids in fast action drills, ef-

ficient jam clearing, and smooth operation. Both kits are built around a stripped DPMS factory charging handle machined to stringent mil-spec standards for proper fit and dependable function. Each kit incluedes a latch spring and roll pin. Badger kit features an over-sized latch that’s easy to find and operate with the left hand. M&A Ambidextrous kit includes a large, extended latch lever that’s easy to grab and allows rapid operation of the handle with either hand. abSPECS: Aluminum charging handle, matte black finish. Badger – Steel latch, matte black. Latch approx. 1½" (3.8cm) long, 5/8" (1.6cm) high. M&A Amb. – Aluminum latch, matte black. Latch approx. 23/8" (6cm) long.

All The Parts Needed To Assemble A Tactical

Charging Handle

#080-000-600AV Badger Kit, 1C39F59 � � � � � � � � � � � � � � � �$ 41.99#080-000-619AV M&A Amb. Kit, 8K33K99 � � � � � � � � � � � � � 34.99

M&A Amb.Badger

AR-15/M16

TACTICAL CHARGING HANDLES

Machined from 6061 aluminum, this AR-15/M16 charging han-dle is ideal for upgrading existing components or replacing worn or broken parts. High quality charging handle has an anodized finish and will provide reliable function in your AR-15 rifle. abSPECS: 6061 aluminum, anodized finish, matte black. Fits all AR-15 upper receivers.

Made To Strict Military Specifications

#749-002-660AV Aluminum Charging Handle, 1C20D18 � � � � � � � � � � � � � � � � � � � � � � � � � $ 24.99

DPMS AR-15/M16

ALUMINUM CHARGING HANDLE

Designed for competition shooters or anyone who may need to shoot from transitional positions, Gen 3 charging handle offers a huge, 3" wide grasping area that's equally accessible to your right or left hand. Enables use of either the standard finger and thumb grip or the palm of the hand to charge the rifle on both the strong and support side. Whatever the situation, you'll get a round in the chamber quickly and get your rifle on line. Deep ridges all around the latch and on the back of the handle give you a superb, no-slip purchase yet won't abrade the hand. abSPECS: Aluminum, hardcoat anodized, matte black finish. Models for AR-15/M16 (5.56 NATO/.223 Rem) and AR-style .308 (7.62 NATO/.308 Win).

“Can't Miss” Design Helps You Get A Round In The Chamber Fast

#093-000-058AV AR-15/M16 Amb. Charging Handle, 3K91L99 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 94.99

#093-000-059AV AR-308 Amb. Charging Handle, 3K95A99 � � � � � � � � � � � � � � � � � � � � � � � � � � 98.99

BADGER ORDNANCE AR-15/M16/AR-STYLE .308

GEN 3 AMBIDEXTROUS CHARGING HANDLE

Geissele designed its Airborne Charging Handle (ACH) at the specific request of an "elite" unit of the United States armed forces so it won’t interfere with a red dot sight or similar low-mounted optic. Its low-profile, ambidextrous lever is also less likely to get snagged on vegetation and other gear. "Low profile" doesn’t mean you have to compromise accessibility or ease of use. The shortened levers have gently concaved radius cuts in both the vertical and horizontal planes so the hand can get a secure purchase. Geissele even gave the ACH checkered grasping to ensure your a positive hold, even when your hands are wet or you’re wearing gloves. As an added benefit, the ACH comes with a raised lip at the aft end that redirects gas blow back away from the shooter when using short-barreled or suppressed weapon systems. abSPECS: Machined from extra-strong 7075 T6 aluminum, Type III hardcoat anodized in basic Black or Geissele’s Desert Dirt Color (DDC). Fits stan-dard mil-spec AR-15 upper receivers.


AIRBORNE CHARGING HANDLE

Won’t Interfere With Optic or Other Gear - Still Easy To Operate

#100-025-736AV Airborne Charging Handle, Black, 7B89F00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.00

#100-025-737AV Airborne Charging Handle, DDC, 7B99A00 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.00

72 Sig3 p33-48.indd 41 6/18/2019 11:34:19 AM

AR

-15

/M16


SINCE 1939

The BCMGunfighter Gen 2 charging handle pre-serves the enhanced performance of BCM's original "tacti-

cal" AR-15 charging handle - with multiple improvements that make it even easier to operate, more reliable, and yes, unique-looking. The updated Gunfighter continues to provide a larger grasping surface than a mil-spec handle, coupled with a smaller overall profile, while it eliminates the risk of breaking the latch roll pin when you yank the handle with some "oomph." The Gen 2's redesigned geometry takes the stress off the latch pin and redirects it into the far stronger T-handle itself. The result is a straighter pull that keeps the energy closer to the centerline of the rifle, so you don’t twist the handle, risking a break, especially when operating the charging with your supporting hand. Beveled edges provide an easy-to-grasp, while a top shield prevents gas from blowing back into your face when run-ning the gun with a silencer. Robust forged 7075 T6 aluminum con-struction and Mil-A-8625F, Type III, Class 2 hardcoat anodized for enhanced surface strength. Fits all mil-spec direct impingement AR-15 upper receivers. Not compatible with adjustable gas keyed bolt/carrier groups. Standard Gen 2 latch is available in Mod 3B (large latch) and Mod 4B (medium latch) configurations. Plus, there's an Ambidextrous version in 3X3 (large latch) and 4X4 (medium latch) configurations. Whichever model you choose, it is sure to improve the reliability, ease of operation, and yes, looks of your AR-15. abSPECS: 7075 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. 67/8" (17.5cm) O.A.L.


BCM GUNFIGHTER GEN2 CHARGING HANDLE

Mod 3B/4B

#100-027-144AV Mod 4B Charging Handle, 1E47K10 � � $ 49.95#100-027-145AV Mod 3B Charging Handle, 1E47D10 � � 49.95#100-027-146AV Mod 4X4 Ambd Charging Handle,

1E75D39� � � � � � � � � � � � � � � � � � � � � � � � � � � 79.95#100-027-147AV Mod 3X3 Ambd Charging Handle,

1E75J93 � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.95

Runs as Hard as You Do - Easy To Locate &

Operate - Ambidextrous Model Available

Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper re-ceiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self lubricating finish for exceptionally smooth operation. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 67/8" (17.5cm) long. Fits mil-spec AR-15/M16 upper receivers.

Slick Teflon® Finish For Ultra-Smooth Operation

#100-004-996AV Chrging Handle Assembly, 2Z21P46 � �$ 23.99

DOUBLESTAR AR-15/M16

CHARGING HANDLE ASSEMBLY

Tactical charging handle is machined from aluminum bar stock with thicker dimen-sions than standard charging handles to withstand wear and rough use. Large diameter coiled spring pin absorbs shock and flexes so it won’t fail under extreme conditions. Broad contact points make traditional and tactical weapon manipulation easy, and grooved sur-faces help weapon retention and assist positive charging operation while wearing gloves. Standard Battle Latch Charging Handle fits AR-15s and is designed for right handed shooters. Ambidextrous models available to give AR-15/M16/M4 and AR-style .308 rifles the added versatility of true ambidextrous function. abSPECS: 6061-T6 aluminum, Mil-spec type III hardcoat anodized, matte black finish.

Positive, One-Handed Operation For Both Right & Left Handed

Shooters

#100-011-378AV AR-15 Battle Latch Charging Handle, 1C71E78 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 75.00

#100-009-955AV AR-15 Ambidextrous Battle Latch Charging Handle, 1C74L30 � � � � � � � � � 80.00

#100-011-379AV AR-308 Ambidextrous Battle Latch Charging Handle, 1C74G30 � � � � � � � � � 80.00

#100-011-382AV Magazine Release Tool, 1C8A29 � � � � � 9.99

PHASE 5 TACTICAL AR15/M16/AR-STYLE .308

BATTLE LATCH CHARGING HANDLE Sometimes you need an upgraded, uprated, ergonomically en-hanced, ambidextrous charging handle you can operate telepathi-cally....and sometimes you just need a darned well-made, reliable, standard handle. The Luth-AR charging handle assembly is the lat-ter. And it's ready to drop right into your rifle/carbine's upper receiver because it is the complete assembly of the handle itself (aluminum, hardcoat anodized), latch, pin, and spring all put together. Many of the updated handles are great and will make hand-cycling the bolt/carrier of your rifle easier, faster, or more reliable under stress - we know, we sell a LOT of them - but when Basic will get ya where ya need to go, reach for a Luth! ab

Sturdy, Reliable, Basic Handle Gets the Job

Done

#100-028-064AV AR-15 Charging Handle, 3D17J59 � � � �$ 18.79

LUTH-AR AR-15/M16

MIL-SPEC CHARGING HANDLE

The SCH is ambidextrous for seamless operation from either side of the weapon. The contour of the levers is similar to the charging handle of an M14, with radius cuts on both the x-axis and the y-axis. Grasping surfaces are checkered to help you get a non-slip hold to charge the rifle on the first attempt. Rugged, too - the SCH is 3D machined from a solid billet of 7075 T6 aluminum, with a tough Type 3 hardcoat anodized finish in basic black or Desert Dirt Color (DDC). A raised rear mitigates gas blow back to the shooter when shooting SBRs and suppressed weapons. ab


SUPER CHARGING HANDLEAmbidextrous - In a Pinch, Charge

the Weapon With Either Hand

#100-018-941AV AR-15/M16 Super Charging Handle, Black, 7B89P00 � � � � � � � � � � � � � � � � � � � � $ 89.00

#100-018-942AV AR-15/M16 Super Charging Handle, DDC, 7B99P00 � � � � � � � � � � � � � � � � � � � � 99.00

Extra-thick handle includes a gas deflection groove to protect shooter from gas blowback. Extended finger latches aid in fast jam clearing. Flat Latch has a deep hook contour. Military (Mil) Latch has smooth face with round edges that are easy on fingers. Combat Latch – has a large grooved surface for easy handling. abSPECS: Aluminum, hardcoat anodized, matte black. AR-15/M16 models are compatible with AR-15/M16 uppers. AR-Style .308 model is compat-ible with ArmaLite® AR-10®, Knight’s Armament SR-25 and DPMS LR-308 pattern models. Not compatible with Rock River Arms AR-style .308 up-pers.#556-000-002AV AR-15/M16 Flat Latch Charging

Handle, 4A90P99 � � � � � � � � � � � � � � � � � � $ 90.99#556-000-003AV AR-15/M16 Mil Latch Charging

Handle, 4A82I10 � � � � � � � � � � � � � � � � � � � 90.99#714-000-024AV AR-308 Combat Latch Charging

Handle, 4A86Q34 � � � � � � � � � � � � � � � � � � 101.99#556-000-005AV Military Latch, Only, 4A21C95 � � � � � � � 30.99

Combat

PRECISION REFLEX, INC. AR-15/M16/AR-STYLE .308

GAS BUSTER CHARGING HANDLE

Military

Flat

Keeps Gas Blowback Away From Shooter’s Face

Power Custom's all-steel charging handles for AR-pattern rifles are ma-chined from billet steel so they will not bend or fail during tactical operations

Rigid & Rugged; Extended Latch Makes Cycling Easy

#713-000-153AV AR-15 Steel Charging Handle, 3A59K63 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 71.99

#713-000-170AV AR-308 Steel Charging Handle, 3A81M08 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

AR-308

AR-15/M16

POWER CUSTOM AR-15/M16/AR-STYLE .308

STEEL CHARGING HANDLE or competition. Extended, paddle-like latch is easy to locate and operate, even when wearing gloves, and its textured surface ensures you get a solid, non-slip grip when charging the rifle. AR-308 fits DPMS LR-308, Knight’s Armament SR-25/MK11/M110, LaRue OSR, Noveske 308, and Patriot Ordnance Factory P-308; does NOT fit S&W MP10, ArmaLite® AR-10®, or Rock River Arms. abSPECS: Steel, phosphate finish, matte black.

Drop-in replacement for factory issue handle lets you charge the rifle from either side of the receiver with a rapid palm “blading” motion or the tradi-tional finger/thumb hold. Dual,

over-sized release levers are mirror images of each other, with deeply grooved surfaces that ensure positive contact so you can operate the handle in one fluid, fast motion with wet or gloved hands. Radiused edges won’t cut the hand or snag on clothing and gear. Gives top of rifle a unique, aggressive appearance, too. Raptor-SD is specifically engineered for use on guns fitted with a sound suppressor. Since suppressed guns operate a higher gas pressures, the SD has a ported shaft that redirects gases down and forward, away from the shooter’s face. Works fine on non-suppressed guns, too. Raptor-SL, short for "Raptor SLim," has smaller, reduced-profile grasping ears that minimize the risk of getting caught up in chest rigs or other gear, which can lead to pulling the BCG out of battery unbeknownst to the operator. Deep vertical serrations on the front and rear of the ears still give you a secure, non-slip hold through the entire charging cycle. abSPECS: Machined 7075 T6 aluminum, Type III hardcoat anodized, Cera-kote topcoat in matte black (BLK), flat dark earth (FDE), Tungsten Gray (Gray), or Radian Brown (BRN). Optional Robar NP3® electroless nickel finish embedded with PTFE gives added permanent lubricity for super-smooth operation. AR-15 fits AR-15/M16 rifles with mil-spec upper re-ceiver. May not fit some SIG 516 model rifles. AR-308 fits Aero Precision M5, Armalite® AR-10®, Bushmaster ORC, DPMS LR-308 Gen 1, Knight’s Armament SR-25, M110, MK11, Larue Tactical OSR, Noveske 308, Patriot Ordnance Factory 308, Ruger® SR-762®; will NOT fit Colt 901, DPMS Gen 2, Rock River Arms, SIG 7.62/308, S&W MP10. DPMS G2 fits DPMS Gen 2 and other small frame AR-308 rifles, including Adams Arms SF 308 & Zev Technologies SF-MATEN.

RADIAN WEAPONS AR-15/M16/

AR-STYLE .308 RAPTOR™/ RAPTOR-SD™/RAPTOR-SL™

AMBIDEXTROUS CHARGING HANDLES

For Fast, No-Slip Charging of Rifle With Whichever

Hand Is Free

#100-023-416AV AR-15 Raptor, BLK, 7Z72M81 � � � � � � � � $ 80.99#100-023-418AV AR-15 Raptor, FDE, 7Z72G81 � � � � � � � � 80.99#100-023-417AV AR-15 Raptor, Gray, 7Z72A81 � � � � � � � � 80.99#100-023-419AV AR-308 Raptor, BLK, 7Z81E39 � � � � � � � 90.99#100-023-421AV AR-308 Raptor, FDE, 7Z81C39 � � � � � � � 90.99#100-023-420AV AR-308 Raptor, Gray, 7Z81C39 � � � � � � 90.99 100-030-479AV DPMS G2 AR-308 Raptor, BLK,

7Z81C39 � � � � � � � � � � � � � � � � � � � � � � � � � � 90.99#100-023-422AV AR-15 Raptor-SD, BLK, 7Z89D96 � � � � 99.99 100-033-419AV AR-15 Raptor-SD, FDE, 7Z89L96 � � � � � 99.99 100-033-418AV AR-15 Raptor-SD, Gray, 7Z89E96 � � � � 99.99 100-033-420AV AR-15 Raptor-SD, BRN, 7Z89M96 � � � � 99.99 100-033-421AV AR-15 Raptor-SD, NP3, 7Z102D81 � � � 113.99 100-033-434AV AR-308 Raptor-SD, BLK, 7Z98N53 � � � 109.99 100-033-436AV AR-308 Raptor-SD, FDE, 7Z98N53 � � � 109.99 100-033-435AV AR-308 Raptor-SD, Gray, 7Z98Q53 � � 109.99 100-033-437AV AR-308 Raptor-SD, BRN, 7Z98A53 � � � 109.99 100-033-438AV AR-308 Raptor-SD, NP3, 7Z115M67 � � 128.99 100-031-186AV AR-15 Raptor-SL, Black, 7Z72I81 � � � � � 80.99

Raptor

Raptor-SD

Items

Tactical charging handle can be operated by either hand from almost any position to ensure fast, easy weapon charging and jam clearance. Large, 1" long extension on the right side is easy to access under stress, even with an oversized optic on the receiver. Provides plenty of leverage to operate the handle with the trigger hand in one, fluid motion without having to separately release the latch on the left side. Comfortable finger groove in the extension helps you operate the handle by feel, without taking your eyes off the target. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 71/8" (20. 8cm) long, 3" (7.6cm) wide across grasping surface. 1.9 oz. (53g) wt.

Easy To Grasp Ambidextrous

Handle For Fast Charging & Easy Jam Clearance

#100-005-308AV Tac-Latch Charging Handle, 7B66H19 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 81.99

TAC-LATCH USA AR-15/M16

ADVANCED DESIGN CHARGING HANDLE

CH

AR

GIN

G H

AN

DLE

S

WANT MORE NEW PRODUCTS?SHOP ON LINE!

PRODUCTS ADDED DAILY

72 Sig3 p33-48.indd 42 6/18/2019 11:34:23 AM

AR

-15/M

16


brownells.com

Offering the same ambidextrous capability as the original Rap-tor, Raptor-LT handles are machined from 7075 aluminum, given a Type III hardcoat anodized finish, and then overmolded with high-strength, fiberglass reinforced polymer for the ultimate combina-tion of strength, weight, and durability. Like the original, you can still charge the rifle from either side of the receiver by a fast, palm “blading” motion or the traditional finger/thumb hold. Mirror-image over-sized release levers have deep grooves for positive contact that lets you operate the handle in one fluid, fast motion with wet or gloved hands. Radiused edges won’t cut the hand or snag on clothing and gear. Models available for AR15/M16 and AR-308 rifles (see list below) and clones in three colors: black, flat dark earth, and gray, all designed to match standard Magpul® color offerings. abSPECS: Machined 7075 T6 aluminum, hardcoat anodized, with over-molded polymer covering. AR-15 fits AR-15/M16 rifles with mil-spec up-per receiver. May not fit some SIG 516 model rifles. AR-308 fits Armalite® AR-10®, DPMS LR-308, Knight’s Armament SR-25, M110, MK11, Larue Tactical OSR, Noveske 308, and Patriot Ordnance Factory 308; may not fit Rock River Arms or Sig 7.62/308 rifles.#100-024-307AV AR-15 Raptor-LT Amb. Charging

Handle, Black, 7Z55E67 � � � � � � � � � � � � � �$ 61.99#100-024-308AV AR-15 Raptor-LT Amb. Charging

Handle, FDE, 7Z55E67 � � � � � � � � � � � � � � � 61.99#100-024-309AV AR-15 Raptor-LT Amb. Charging

Handle, Gray, 7Z55N67 � � � � � � � � � � � � � � 61.99#100-024-310AV AR-308 Raptor-LT Amb. Charging

Handle, Black, 7Z64I24 � � � � � � � � � � � � � � 71.99#100-024-311AV AR-308 Raptor-LT Amb. Charging

Handle, FDE, 7Z64J24 � � � � � � � � � � � � � � � 71.99#100-024-312AV AR-308 Raptor-LT Amb. Charging

Handle, Gray, 7Z64Q24 � � � � � � � � � � � � � � 71.99

The Fast, Non-Slip Handle AR Shooters Love - Only Even LESS Slippery

Replacement charging handle offers a quick reliability upgrade to your AR. Lightweight aluminum construction keeps weight to a minimum, while the super-slick, self-lubricating NiB-X nickel-boron surface coating ensures smooth cycling and gives nothing for foul-ing or grit to adhere to, so it facilitates quick, easy cleaning, too. abSPECS: Aluminum, NiB-X nickel boron coating, silver-gray finish. 63/4" (17.1cm) long. 2" (5cm) wide gasping surface. Fits mil-spec AR-15/M16 upper receivers.

WMD GUNS AR-15/M16

NIB-X™ CHARGING HANDLESlick Nickel-Boron

Coating For Smooth Operation & Easy

Cleaning

#100-010-980AV NiB-X Charging Handle, 3C29K81 � � � $ 34.99

Oversized for quick access from all shooting positions. Allows brisk, easy operation with left hand. Makes the charging handle easi-er to find and operate, especially on scope-mounted flat top receiv-ers. Great for three gun shooters; expedites reloads and immediate action drills. Legal for NRA High Power, Match Rifle shooters. Works on all AR 15/M16-type rifles including the AR-10 and SR-25. Easy, no-gunsmithing installation. abSPECS: Steel, matte blue. 1.46" (37.3mm) long, .644" (16.3mm) high con-tact area. Instructions included.

GEN II TACTICAL LATCH - Mid-sized latch for those who want a size between standard and oversized. Makes the charging handle easier to find for brisk operation with the left hand without protrud-ing too far. Works on all AR-15/M16-type rifles including the AR 10 and SR-25. Easy, no-gunsmithing installation.SPECS: Steel, matte blue. 1.25" (32mm) long, 1.25" wide. Instructions included.#093-000-024AV Gen II Tactical Latch, 3K18M79 � � � � � � �$ 19.99

#093-249-020AV Tactical Latch, 3K17H99 � � � � � � � � � � � � �$ 18.99


TACTICAL LATCHOne Hand Operation Of Charging Handle

RADIAN WEAPONS AR-15/M16/AR-308

RAPTOR-LT AMBIDEXTROUS CHARGING HANDLE

Large, extended latch levers are easy to find and grab, even on flat top receivers with low-mounted optics; gives superior

leverage for bolt retraction. Allows rapid, ambidextrous operation of charging handle. Made of rigid aluminum for durability and light weight. Replaces factory latch easily, without fitting. abSPECS: Aluminum, black, anodized. 27/16" (11mm) long.

M&A PARTS AR-15/M16

AMBIDEXTROUS TACTICAL LATCH

#553-000-006AV Amb. Tactical Latch, 3E13A08 � � � � � � � � $ 17.29

Light, Quick-Grab Design; Gives Extra Leverage

Heavy-duty latch enables fast, efficient, unimpeded operation of the charging handle with either hand, even when wearing gloves. Extended, off-side design with gently rounded tips won’t interfere with sling or catch on other equipment. Installs in place of your rifle’s existing charging handle latch using existing spring and detent. abSPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. 21/2" (6.3cm) long. Includes replacement pivot roll pin.

For Fast, Efficient Charging Handle Operation With Either Hand

#100-004-897AV Ambidextrous Latch, 1C18D58 � � � � � � $ 20.00

PHASE 5 TACTICAL AR-15/M16

AMBIDEXTROUS CHARGING HANDLE LATCH

Replacement latch has a deeply grooved face and large surface area to ensure a posi-

tive grip on the first try. Easy to get ahold of when wearing gloves, in stressful situations, or on a rifle with a big scope. abSPECS: Steel, Melonite® finish, dark gray. Fits mil-spec AR15/M16 charg-ing handles. Latch only - re-use your gun's existing roll pin and spring.


TACTICAL CHARGING HANDLE LATCH

#100-015-922AV Tactical Chrging Hdle Latch, 9A11F10 � � $ 13.59

Fast, Easy & Simple But Effective Upgrade

Forged from extra-hard 7075 T6 aluminum, with a tough Type III hardcoat anodized finish, V Seven's take on the mil-spec style charging handle is compatible with all standard forged upper receiv-ers. An oversized, deeply grooved latch makes it easy to positively #100-500-004AV AR-15 Charging Handle, 7G00LUS � � � $ 40.74


CHARGING HANDLEExtra-Strong Forged Aluminum Alloy - Easy To Grab & Operate Without Slipping cycle the handle on the first try and not lose control of it half way

through the pull - important in competition or tactical operation where economy of effort is critically important. Snappy-looking V Seven Logo is laser etched on the side. ab

CH

AR

GIN

G H

AN

DLE

SB

OLT

& M

AG

RE

LEA

SES

Replacement for factory latch offers a large surface area with grid knurling for easy, positive manipulation. Also makes it easy for left-handed shooters to release bolt with index finger. Gives more area to catch the bolt, to help ensure lock open. Machined from high-grade billet steel for precise fit and extra strength to give long service life. abSPECS: Machined 4140 steel billet, matte black finish.


ENHANCED BOLT CATCHEases Operation For Everybody & Helps Left-

Handed Shooters Release Bolt With Index Finger

#093-000-057AV Enhanced Bolt Catch, 3K47G99 � � � � � $ 49.99

Straightforward, well-made mil-spec parts for replace-ment of worn originals or for use in your next build. Both parts are spec'd to drop into a lower receiver that matches Colt's original factory specs. Bolt Release is Parkerized steel

with the follower "engagement arm" that protrudes from the face of the part. Mag Release is just the button, anodized aluminum, with the deep concentric "bullseye" grooves on the face. The his the original Colt factory design, threaded to accept the magazine catch's threaded shank. ab

Sturdy, Reliable Parts to Keep Your Rifle Operating Reliably

#100-028-035AV AR-15 Bolt Release, 3D5B96 � � � � � � � � � �$ 6.57#100-028-036AV AR-15 Mag Release Button, 3D1M50 � � � 1.83

LUTH-AR AR-15/M16

MAGAZINE & BOLT RELEASES

The Magpul Battery Assist Device (B.A.D.) is an ex-tended bolt release that allows the shooter to keep his hand in the ready position on the pistol grip and oper-ate the bolt catch with the trigger finger. Streamlines bolt catch manipulation to get the weapon into battery more quickly for improved operator readiness and weapon handling efficiency. Easy to install and remove—no weapon disassembly re-quired. The B.A.D. lever clamps securely to the factory bolt release with a Torx® head screw and extends a paddle through the front of the triggerguard to the right-hand side of the weapon. Trigger finger can stay outside the triggerguard as you operate the lever, and fac-tory bolt catch retains normal function with B.A.D. installed. Made of a high-grade aluminum alloy, hardcoat anodized to MIL-A-8625F, Type III, Class 2 spec for extra strength and wear resistance. abSPECS: Aluminum, hardcoat anodized, matte black. Torx wrench and installation instructions included. Fits mil-spec AR-15/M16 receiver with factory bolt release lever.

MAGPUL AR-15/M16

B.A.D. LEVER™Lets You Release The Bolt With The Trigger Finger;

Improves Readiness & Efficiency

#100-004-755AV B.A.D. Lever, 3K26M16 � � � � � � � � � � � � � � $ 28.45

As its name indicates, Geissele's Maritime Bolt Release is designed for use in wet environ-ments where the AR-15 operator needs an over-sized, deeply textured button for positive, first-attempt operation of the bolt release. It's an excellent upgrade for anybody who needs help making solid contact with the release button under stress or when wearing gloves. A large, aggressively checkered two-part thumb pad gives you non-slip contact and positive feedback when manipulating it in the dark or while wearing gloves. The s large sur-face area is a big help in quickly locking the bolt back and releasing it after a mag change. It's strong, too - heat treated 8620 steel - so it won’t fail under hard use, nor will the black Parkerized (manga-nese phosphate) finish that resist surface wear & corrosion. Fits any lower receiver that accepts a standard mil-spec AR-15/M16/M4 bolt release; spring, plunger & roll pin not included - recycle your old parts or purchase separately. Left-handed shooters get a bonus have because they won’t have to break their grip to manipulate the release; they can simply use their left index finger to operate the button quickly and efficiently when making magazine changes. ab


MARITIME BOLT RELEASEWet Hand? Wearing Gloves? Helps You

Release the Bolt on the First Swipe

#100-024-576AV AR-15 Maritime Bolt Release, 7B25C99 � �$ 26.99

Parkerized steel bolt catch is a direct replace-ment for the factory catch on DPMS LR-308 and Remington R-25 rifles. A “must have” for finishing a custom build or refurbishing an existing rifle.

Requires 1/16" hex head bolt catch screw, sold separately below. abSPECS: Hardened carbon steel, Parkerized, matte black. Fits DPMS LR-308 and Remington R-25 rifles.

Genuine DPMS Factory Part

#231-000-273AV Bolt Catch, Only, 1C7D72 � � � � � � � � � � � � $ 9.09#231-000-274AV DPMS Bolt Catch Screw, 1C7F49 � � � � � 9.99

DPMS AR-STYLE .308 BOLT CATCH

Troy's extended release lever enables you to operate the bolt release with your trigger finger while keeping your hand on the pistol grip in the ready position. Eliminates wasted time and mo-tion by placing the control pad just outside the triggerguard. An upward push on the lever locks the bolt open; a downward press releases it. Keeps your support hand free for mag changes or to address jams or other malfunctions. Clamps over factory bolt release; no permanent mods to gun. abSPECS: Aluminum, hardcoat anodized, matte black. Fits mil-spec AR-15/M16 lowers. Includes Allen wrench and instructions.


AMBIDEXTROUS BOLT RELEASEEliminates Wasted Motion By Letting You

Release Bolt With Your Trigger Finger

#100-011-190AV Ambidextrous Bolt Release, 3B25K11 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.99

Extended release lever speeds magazine changes and enhances the shooter’s ability to clear jams, double feeds, and malfunctions quickly and safely. Lets you

catch and release the bolt with the trigger finger inside the trig-gerguard, instead of with your off hand. Push upward on the lever to lock the bolt rearward; push lightly downward to release it. Both operations can be performed without removing your hand from the pistol grip. EBRv1 clamps to your rifle’s existing bolt release. Can be installed or removed in minutes with no permanent alteration to your rifle. EBRv2/308 is a one-piece, drop-in replacement for the factory bolt release on DPMS LR-308 series and Remington R-25 (.308, .243, and 7mm-08) AR-308 rifles. abSPECS: Machined steel, matte black finish. 21/4" (5.3cm) long. 1/2 oz. (14g) wt.

PHASE 5 TACTICAL AR-15/M16/AR-STYLE .308

EXTENDED BOLT RELEASECatch & Release Bolt With

Trigger Finger For Fast Mag Changes & Jam Clearing

#100-004-898AV EBRv1 Bolt Release, 1C23C22 � � � � � � � $ 25.00#100-005-733AV EBRv2/308 Bolt Release, 1C50N14 � � 53.99

EBRv1

EBRv2

72 Sig3 p33-48.indd 43 6/18/2019 11:34:29 AM

AR

-15

/M16


SINCE 1939

Machined aluminum magazine release button has a proprietary “Diamond Texture” surface for secure thumb contact and easy “one-hit” mag drops. Also adds a distinctive visual touch to your rifle. Drops into any mil-spec lower receiver to replace the factory magazine release button. abSPECS: Machined from 6061 T6 aluminum billet, hardcoat anodized, matte black.


BILLET MAGAZINE RELEASE BUTTONGives Ultra-Positive Thumb Engagement

& Enhanced Appearance

#100-011-245AV Billet Mag. Release Button, 8C5H55 � � $ 5.69

Compact “weak” side mag release but-ton lets you to drop the mag using either

hand. Ultra-compact profile won’t catch on gear or clothing, yet the shape replicates the feel of the standard, strong-side button for left-hand shooters. Simple installation - works with original factory mag release button, or with enlarged or extended tactical buttons. Will not interfere with most ambidextrous bolt releases. ab


AMBIDEXTROUS MAGAZINE RELEASEEasy-To-Hit, Yet Low Profile So Won’t

Snag On Clothing Or Gear

#100-008-192AV Amb. Magazine Release, 3B55P76 � � � $ 63.99

Innovative, two-in-one design is the perfect choice for setting up AR-15s that double as tactical and sporting rifles. Large, tactical button installs vertically or horizontally removes quickly and easily by loosening the setscrew and sliding it off. Small, serrated pad underneath prevents snags on brush and clothing; will not interfere with your carry sling. CNC-machined from bar stock for added strength and reliability. abSPECS: Steel bar stock, parkerized finish. Removable Button - 11/8" (28.6mm) x 3/4" (19mm). Fixed Button - 1/2" (12.7mm) long x 1/4" (6.4mm) wide.

WILSON COMBAT AR-15

TACTICAL BOLT RELEASEVersatile, 3-Position Button Accommodates Individual

Shooting Styles

#965-000-037AV Tactical Bolt Release, 5F00JVJ � � � � � � $ 31.95

Oversized magazine release button allows fast mag changes in competition or combat, in daylight or total darkness. Serrated surface and slightly angled configuration draws your finger im-mediately to the button and enables positive, no-slip release in all weather conditions. Two-piece design replaces the factory mag release button with no gunsmithing required. abSPECS: Molded polymer, black. 5/8" (1.6 cm) long x 5/8" wide.

ARREDONDO AR-15/M16

OVERSIZE MAGAZINE RELEASE BUTTON

Change Mags Quickly Without Fumbling To Find The Release

#069-000-027AV Oversize Mag Release Button, 9F26L19 � � $ 27.99

Extended, drop-in replacement for factory part offers a wide, flat finger pad for fast, “can’t miss” magazine changes. Perfect for competi-tion, tactical operations, and self-defense—any high-stress situa-tion where the speed of a magazine change makes the difference between success and failure. Nearly three times the surface area of the factory button with crisp, 24 lpi checkering for positive, nonslip finger contact, so you release the mag on the very first try. Stands .225" higher to give you extra leverage that ensures the mag catch disengages completely. Precision machined from 4140 steel and heat treated for added hardness and wear resistance, with a tough, black oxide finish. May require minor fitting. abSPECS: Steel, oxide finish, matte black. Fits any AR-15/M16/CAR-15/M4 with a USGI-spec magazine release.

AR-15/M16

OVERSIZE MAGAZINE RELEASE“Can’t Miss” Release Button Aids In

Ultra-Fast Magazine Changes

#080-000-529AV AR-15/M16 Oversize Magazine Release, 8K18L79 � � � � � � � � � � � � � � � � � � �$ 19.99

Quicker, easier reloads for right- or left-hand shooters. Lets you activate the magazine re-lease with the thumb of the non-firing hand while keeping the rifle on target. Distinctive design is the same size and configuration as factory part; won’t snag on clothes or branches, and does not interfere with rifle function. Drop-in in-stallation. abSPECS: Steel, parkerized. 1.45" (37mm) long, .246" (6.3mm) wide.

NORGON AR-15/M16 AMBI-CATCH™Rapid Reloads With The Non-Firing Hand

#635-001-015AV Ambi-Catch, 5C81F49 � � � � � � � � � � � � � $ 101.99

Magazine release tool fits most California “bullet button” mag releases and gives stan-dard mag release function. Intended for use only when you take your California-compli-

ant AR-15 outside of California. Strong magnet holds tool in place. Solid billet construction makes tool rugged and durable. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black finish. Fits standard AR-15 bullet buttons. All federal, state and local laws apply.

PHASE 5 AR-15/M16

MAGAZINE RELEASE TOOLGives California-Compliant Mag Release

Full Function

#100-011-382AV Magazine Release Tool, 1C8A29 � � � � � � $ 9.99

Push the giant, over-size button’s checkered face with the right-hand trigger finger or the extra large, paddle shaped, off-side thumb lever with the left hand. No permanent alterations to lower receiver. abSPECS: Steel, blue, matte finish. Right Side Button - .625" (15.8mm) diam-eter. Left Side Lever - .750" (19mm) x .625".

POWER CUSTOM AR-15 OVERSIZED AMBIDEXTROUS MAG RELEASE

#713-215-002AV Amb Mag Release, 3A84N95 � � � � � � � $ 105.99

Easy, One-Finger Operation

Machined, steel magazine release extends more than half an inch and has

a checkered oversized button for quick reloads. Installs just like the factory part. Includes replacement spring. abSPECS: Steel, black oxide finish. 33/64" (14mm) long, 5/8" (16mm) diameter. Spring - 13/8" (3.5cm) long.

Large Diameter & Extended Length Ensure Fast, Easy Reloads

#713-215-003AV Ext. O’sized Mag Release, 3A16D03 � � �$ 20.99

POWER CUSTOM AR-15/M16

EXTENDED OVERSIZED MAGAZINE RELEASE

The Magpul AR Enhanced Maga-zine Release provides an enlarged contact surface for quick and fumble free magazine changes. Larger con-

tact surface for ease and speed when changing out your magazine. And it's easy to install yourself without enlist-ing the aid of a gunsmith. With easy bolt-on installation, the Enhanced AR Magazine Release is machined from mil-spec hard-anodized aluminum to

provide durability and light weight. Two-piece construction for easy installation and reduced profile. Provides larger contact sur-face for positive activation. Compatible with most 5.56 and 7.62 pattern receivers. ab

MAGPUL AR-15/M16

ENHANCED MAGAZINE RELEASEBig, Easy To Find & Hit Contact

Surface for Speedy Mag Changes

#100-900-003AV Enhanced Magazine Release, 3K17A43 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 18.95

Steel bolt catch features an enlarged lower portion that makes it easy to lock bolt to the rear. Enlarged upper portion allows fast bolt release, and “Diamond Texture” thumb pad gives positive engagement and

enhances rifle’s appearance. abSPECS: Steel, Parkerized. 13/16" (3cm) long. Fits all standard AR-15s.#100-011-243AV Enhanced Bolt Catch, 8C12E38 � � � � � �$ 12.99

Enables Easy Locking & Fast Bolt Release


ENHANCED BOLT CATCHB

OLT

& M

AG

RE

LEA

SES

V Seven's mag releases let you customize this critical part to suit your needs. For maximum weight savings, Aluminum model is 48% lighter than factory steel part (only 4.9 grams). It's Type III hardcoat anodized for surface strength and cor-rosion resistance. Titanium model offers more strength but a bit more weight as well (7.4 grams) and is available in natural silver-gray finish or with a tough matte black IonBond finish. Both models avail-able with Grooved or Diamond pattern surface texture. ab

V SEVEN WEAPON SYSTEMS

ULTRA-LIGHT MAGAZINE RELEASE

#100-500-037AV Aluminum Mag Release, Grooved/Black, 7G29A10 � � � � � � � � � � � � � � � � � � � � $ 29.10

#100-500-038AV Aluminum Mag Release, Diamonds/Black, 7G29G10 � � � � � � � � � � � � � � � � � � � � 29.10

#100-500-018AV Titanium Mag Release, Grooved/Black, 7G00BMQ � � � � � � � � � � � � � � � � � � � � � � � � � 42.68

#100-500-017AV Titanium Mag Release, Grooved/Silver, 7G37D83 � � � � � � � � � � � � � � � � � � � � � � � � � � 37.83

#100-500-020AV Titanium Mag Release, Diamonds/Black, 7G44F62 � � � � � � � � � � � � � � � � � � � � 44.62

#100-500-019AV Titanium Mag Release, Diamonds/Silver, 7G39N77 � � � � � � � � � � � � � � � � � � � � 39.77

Shaves More Unnecessary Weight Off Your Tactical or Competition Rifle

SAFE

TY

SE

LEC

TO

RS

Our safety selector is the standard, mil-spec part, except for one small difference Retro Rifle™ fans will appreciate: there is no tick mark on the offside, opposite the lever. Modern semi-auto AR-15 receivers have "Safe" and "Fire" marking on the right-hand side of the receiver, so the blank side of the selector's post has a tick mark to indicate the status of the safety if you look at the gun from that side. (This also means the receiver is already set up for an ambidextrous safety.) Early AR-15s and M16s DID NOT have the markings on that side of the receiver and so lacked the tick mark on the safety selec-tor's offside. A small detail, but if you're going for full retro/replica/clone authenticity on your build, why compromise? Fits Brownells Retro Rifle™ and any standard mil-spec lower, so it's a perfectly serviceable replacement part on any AR-15, as long as you don't need the tick mark. ab

AR-15/M16

OLD-STYLE MIL-SPEC SAFETY SELECTOR

#100-027-721AV No Tick Mark Safety Selector, 5A8H90 � � $ 9.99

Left side: standard lever

No Tick Mark on the Off-Side for an Added Touch of

Authenticity for Your Retro Rifle

SAFETY SELECTOR LEVERS - Replacement levers are deeply grooved for sure-grip and available in various lengths, widths, and styles to facilitate easy safety operation in any condition.SPECS: 12L14 steel, Parkerized, black.#100-010-550AV Standard Amb. Lever , 6D14F57 � � � � � $ 18.59#100-010-551AV Short Amb. Lever, 6D16N65 � � � � � � � � � 17.69#100-010-552AV Thin Ambidextrous Lever, 6D16C65 � 17.69#100-010-553AV Short +Thin Amb. Lever, 6D16K65 � � � 17.69#100-010-554AV Hybrid Amb. Lever, 6D21L35 � � � � � � � � 22.99#100-010-555AV Crank Amb. Lever, 6D22H30 � � � � � � � � 22.99

Standard Short Thin

Short-Thin Hybrid Crank

Machined steel safety selector puts over-sized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wear-ing gloves, and eliminates fumbling in the dark. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. May be customized by positioning the larger pad on either side of the receiver, or by applying high-visibility paint. Standard selector works in any standard AR-15 receiver. Short-Throw selector decreases le-ver travel from 90° to 45°; fits 45 degree receivers only. Mounting hardware included. M&P15-22 is standard-throw selector for Smith & Wesson M&P15-22 rifles. Full-Auto fits mil-spec M16/M4-pattern rifles and carbines capable of full-auto/burst fire. abSPECS: Heat-treated 12L14 steel, Parkerized, Black (Blk) or Flat Dark Earth (FDE). SS Model has stainless steel control paddles with bright polished silver finish. Standard selector fits standard AR-15 lower receiver. Short-Throw selector fits only lower receiver configured for 45 degree selector throw. All come with Torx® attachment screws and L-key wrench.


AMBIDEXTROUS SAFETY SELECTOROversized, Deeply Grooved Levers For Positive Operation With Either Hand

#100-005-841AV Std Amb. Selector, Blk, 6D52D91 � � � � $ 72.99#100-009-868AV Std Amb. Selector, FDE, 6D65C71 � � � � 75.05#100-016-586AV Std Amb. Selector, SS, 6D69F45 � � � � � 75.05#100-010-701AV S&W M&P15-22 Std Amb. Selector,

6D43P89 � � � � � � � � � � � � � � � � � � � � � � � � � � 51.99#100-009-866AV Short-Throw 45° Amb. Selector,

6D68P28 � � � � � � � � � � � � � � � � � � � � � � � � � � 80.99#100-006-839AV Full-Auto Amb. Safety Selector,

6D89P01 � � � � � � � � � � � � � � � � � � � � � � � � � � 93.95

ab

SS Model

Right side: No tick mark

72 Sig3 p33-48.indd 44 6/18/2019 11:34:36 AM

AR

-15/M

16


brownells.com

SAFE

TY

SELE

CT

OR

S

Puts the same, easy-to-operate safety lever on both sides of the receiver for fast, easy operation by left-handed shooters or when shooting with the weak hand.

Swings through the same arc as the standard safety; will not inter-fere with grip position or thumb placement. LR-08B - Ambidextrous safety lever for semi-auto AR-15s. LR-08C - Ambidextrous selector/safety lever for full-auto AR-15/M16s only. abSPECS: Steel, black finish. LR-08B - .650" (16.5mm) long, .234" (6mm) wide contact area. Fits semi-auto rifles only. LR-08C - .675" (17.7mm) long, .234" (6mm) wide contact area. Fits full-auto rifles only.

DPMS AR-15

AMBIDEXTROUS SAFETY/SELECTOREasier Engagement For Left-Handed Shooters

#231-015-012AV LR-08B Semi-Auto Safety Selector, 1C31C64 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 42.99

#231-000-231AV LR-08C Full-Auto Selector, 1C28B42 � � � � � � � � � � � � � � � � � � � � � � � � � � 37.99

Easy-to-install, reversible safe-ty selector ensures ultra-reliable engagement and eliminates the time-consuming job of “fitting the safety” to a factory or aftermarket trigger—the perfect upgrade to accompany a JP Adjustable Trigger. Eliminates the risk of damaging the trigger during fitting and shortens installation time by as much as one-third. An adjustment screw on the selector drum lets you quickly and easily set the correct trigger/safety relationship to com-pletely block trigger movement when the selector is set to “safe.” A second screw inside the drum ensures the adjustment screw stays locked in place. Deeply grooved control pad gives positive thumb engagement even when wearing gloves, and can be installed in the standard position on the left-side of the receiver or on the right side for fast, natural operation by left-handed shooters. Includes a low-profile ambidextrous lever for the other side that adds minimal bulk while giving you the flexibility to operate the safety with the off hand in an emergency or if the strong hand is injured. abSPECS: Steel with aluminum control pads, matte black finish. Installation instructions included.


JPFC-SA ADJUSTABLE/REVERSIBLE SAFETY SELECTOR

#452-000-043AV JPFC-SA Adj./Rev. Selector, 2E63P67� � � � � � � � � � � � � � � � � � � � � � � � � � � $ 66.99

Eliminates “Fitting” The Safety; Works With Factory &

Aftermarket Triggers

Noveske’s STS (Short Throw Selector) gives your AR’s selector a short 60° throw for fast, easy transition between the “Fire” and “Safe” positions. It uses Magpul’s popu-lar SSG selector lever (included) for the FN SCAR for enhanced ergonomic feel, and is available in both standard right-hand and ambidextrous versions. For further versatility, the Noveske kit includes both long and short levers to help you get the best feel and function. The central shaft is machined from hardened stainless steel with a nitride coating for surface wear resistance. abSPECS: Selector shaft - Stainless steel, hard nitride finish, matte black. Levers – molded polymer, matte black.

60° Selector With Magpul SSG Levers

#100-010-790AV Std (RH) STS Selector, 1A35E25 � � � � � � �$ 36.05#100-010-789AV Ambidextrous STS Selector, 1A37I10 � � 37.95

NOVESKE AR-15

SHORT THROW SELECTOR

Safety selector drops in to standard AR-15 and DPMS-pattern AR-308 lower receivers to give ambidextrous function. Opposite-side lever secures with setscrew for easy installation and removal. Pronounced ridges on the levers give you excellent purchase, even with wet hands, for fast, positive operation. abSPECS: Machined steel, matte black finish.

CMMG AR-15/M16

AMBIDEXTROUS SAFETY SELECTORGives Fast, Positive Control

With Either Hand

#100-014-542AV Amb. Safety Selector, 3B24F30 � � � � � � � $ 27.99

Drop-in replacement for a mil-spec selector lever, this one comes with two interchangeable throw levers, a standard 90 and a 60 short-throw, so you can install the one that suits your

needs best. Even better, Seekins made these ambidextrous, so you have a throw lever on the left side of the rifle, too. Unique texturing on the levers gives excellent thumb contact and looks neat, too. ab

SEEKINS PRECISION AR-15

AMBIDEXTROUS SAFETY SELECTOR

#100-018-841AV Amb. Safety Selector, Blk, 8C31F62 � � $ 34.19#100-023-051AV Amb Safety Selector, Red, 8C32F74 � � 38.99

Long- & Short-Throw Models Available

Round thumb pad gives fast, positive operation; ideal when wearing gloves. abSPECS: 4140 steel, black, matte finish. For AR-15 only.


STAR SAFETY SELECTORRound Profile Rolls Under Your Thumb

#739-000-007AV AR-15 Star Safety Selector, 9C9D38 � � $ 12.19 V Seven's lightweight all-Titanium convertible lever has both 57° and 90° throw options, so you can choose be-tween a standard throw or a faster short

throw. Fits any rifle that accepts a mil-spec AR-15/M16 lever. Dim-pled exterior on the levers gives your rifle a unique appearance and gives you a non-slip contact surface for times when having your thump slip off the lever is a no-go. Comes as unassembled parts, so you can configure it with the long lever on either side of receiver. All components, including the Torx screws, are made from Grade 5 Titanium. Not compatible with Hyperfire triggers or Ruger® Preci-sion Rifle®. V Seven recommends applying Blue Loctite to the screw threads during assembly. ab


57/90-DEGREE AMBIDEXTROUS SELECTOR

Versatile - Use as Standard- or Long-Throw; Unusual, Impressive Looks

#100-500-026AV AR-15 57/90 Degree Ambidextrous Selector Raw, 7G66F99� � � � � � � � � � � $ 66.99

All-steel selector lever installs like the original and adds a lever to the right side of the gun for left-handed shooters or right-handed shooters shooting from unorthodox positions. Right-side lever has a low profile to avoid interfering with the trigger finger of right-handed shooters and is retained with a detent - no screws or pins to work loose. Small and large lever can be reversed and used on either side. Made of tool steel to last a lifetime. abSPECS: Hardened tool steel, matte black oxide finish. Fits semi-auto AR-15s with mil-spec lower receiver.

TROY INDUSTRIES AR-15

AMBIDEXTROUS SEMI-AUTO SAFETYLets You Control Safety From Either

Side Of Your AR

#100-008-880AV AR-15 Ambidextrous Selector, 3B47I83 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 62.99

The Radian Weapons (formerly AXTS) Talon™ ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selec-tor levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles. abSPECS: Levers machined from billet 7075 T6 aluminum, with Type 3 hard-coat anodized finish. Center shaft machined from hardened steel with black Nitride finish.

RADIAN WEAPONS AR-15/M16

TALON SAFETY SELECTORAmbidextrous Control

- Use as Standard or Short-Throw Lever

#100-023-423AV AR-15 Talon Safety Selector Ambidextrous, Black, 7Z42B81 � � � � � � �$ 47.99

#100-023-424AV AR-15 Talon Safety Selector Ambidextrous FDE, 7Z42B81 � � � � � � � � � 47.99

SMA

LL PA

RT

S & K

ITS

Parkerized steel pins are direct replacements for the factory front pivot and rear takedown pins on DPMS LR-308 and Remington R-25 rifles. Easy, fast way to improve the looks of an older rifle: replace unsightly, dinged-up pins. abSPECS: Hardened carbon steel, Parkerized, matte black. .275" O.D. shanks. Pivot – 1.640" long; Takedown – 1.222" long. Fits DPMS LR-308 and Remington R-25 rifles.

DPMS AR-STYLE .308

PIVOT & TAKEDOWN PINS

Pivot Pin

#231-000-271AV Front Pivot Pin, 1C8E99 � � � � � � � � � � � � � �$ 9.99#231-000-272AV Rear Takedown Pin, 1C5I94 � � � � � � � � � � � 7.99

Takedown Pin

Genuine DPMS Factory Parts

Hardened steel pins fit standard AR-15 lowers to make rifle take down easy and fast. These pins are .030" longer than standard, giving purchase when pushing them from the left side of the re-ceiver. Feature textured heads for easy han-dling and bullet tip guides that help center a bullet or other takedown tool. Tapered cuts make pins easy to push. Titanium is 50% lighter than steel, perfect for a lightweight rifle build or just to add a little contrast to your black rifle. abSPECS: Hardened steel, black oxide finish, or Titanium, polished silver finish. Fits .250" dia. receiver holes. Includes both front and rear pins, detents, springs, and magnetic assembly tool.

BATTLE ARMS AR-15/M16

ENHANCED PIVOT/TAKEDOWN PIN SETSPins Help Make AR-15 Assembly &

Disassembly Easy

#100-013-491AV Enhanced Takedown Pins, 6D26F39 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.45

#100-015-185AV Titanium Enhanced Takedown Pins, 6D31B24 � � � � � � � � � � � � � � � � � � � � � � � � � � 37.99

Oversize pins hold hammer and trigger in precise alignment without free play for consistent trigger letoff. Moly impregnated to reduce friction. Fits "small pin" receivers. Hex-head screws locate pins to frame, eliminate the hammer J spring. Installation may re-quire reaming the hammer's pin hole for proper fit. abSPECS: Tool steel, moly coated. .156" (3.9mm) diameter. 1" (2.5cm) long. Pack of two pins.


ANTI-WALK PINS

#452-015-028AV Small Anti-Walk Pins, 2E13I93 � � � � � � � � $ 15.79

Eliminate Hammer & Trigger Wobble

Juggernaut's cleverly engineered kit enables you to easily make your AR compliant with current California law without permanently altering the gun. The modified quick-release takedown pin acts as a button to separate the upper from the lower just enough to disengage semi-automatic operation and automati-cally disable the magazine lock. Barrel tips down slightly under its own weight, but the upper won’t separate from the lower, making the mag release operable. Then simply swap mags, slap the bottom of the handguard upward to re-engage the spring-loaded takedown pin and lock the upper back in place - so you're back in action ASAP. This kit allows you to keep your pistol grip, foregrip and adjustable stock. And best of all, should the CA law change or you someday move to a different state, the Hellfire kit is easily removed and your gun can be returned to its original configuration. Fits mil-spec AR-15 receivers with .250" dia. pivot/takedown pin holes. Laws and regulations can change at any time; the user is responsible for making sure his rifle stays compliant. ab

JUGGERNAUT TACTICAL AR-15

HELLFIRE MODE KITSimple Drop-In Kit Makes Your AR

California Compliant (For Now)

#100-027-291AV Hellfire California Mod Kit, 4B52P28 � � $ 59.99

Installed

V Seven's pin set is made with "Super Aluminum Construction" that is guaranteed against corrosion and is 64% lighter than a stan-dard steel mil-spec pin. Unique dimple tip design aids in pushing pin during disassembly. Type III hardcoat anodized adds surface strength and blends in with the rest of your Black Rifle. ab


ULTRA-LIGHT PIVOT/TAKEDOWN PIN SET

Lighter Than Traditional Steel Pins, Yet Strong

#100-500-031AV AR-15 Ultra-Light Takedown & Pivot Pin Set Blk, 7G23Q28 � � � � � � � � � � � � � $ 23.28

72 Sig3 p33-48.indd 45 6/18/2019 11:34:40 AM

AR

-15

/M16


SINCE 1939

SMA

LL P

AR

TS

& K

ITS

Tough, dense rubber insert replaces factory buffer inside the extractor spring to prevent “extractor bounce” that can occur in rapid-fire conditions. Insert keeps the extractor from losing contact with casings and re-ducing faulty ejection of the spent casing. Sold in 10-paks. abSPECS: Rubber, black. .15" (3.8mm) long, .11" (2.8mm) dia. Sold in 10-paks.

AR-15

EXTRACTOR BUFFERStronger Base For Eliminating Extractor

Bounce

#078-000-071AV Extractor Buffers, 10-pak, 2D12L79 � � �$ 13.99

One of the fastest, easiest, cheapest accuracy-improvements you’ll ever find for your AR! Tough, high-density synthetic rubber wedge drops into the space behind the takedown pin in the lower receiver to provide tension between the receiver halves and prevent movement for improved accuracy. Takes the “loose gun” factor out of the equation, so you shoot tight, consistent groups. Can be trimmed to accommodate any variation in upper-to-lower receiver fit. abSPECS: Synthetic rubber. 3/4" (1.9cm) high, 1/2" (1.3cm) diameter.

AR-15/M16

ACCU-WEDGEDrop-In Accuracy Fix; Stops Unwanted

Movement Between Receiver Halves

#080-000-663AV Brownells ACCU-Wedge, 8K4P99 � � � � �$ 5.99

Helps promote better accuracy by making the upper and lower receiver fit tighter. Open upper receiver; drop this long-wearing, rubber wedge into the rear of the lower, behind the push pin. Absolutely no modifications required. abSPECS: High-density, thermo-plastic rubber, 1/2" (12.5mm) long.

Z-M WEAPONS AR-15/M16

ACCU-WEDGE

Instantly Tightens Loose Upper & Lower Receivers

#993-150-100AV AR-15/M16 Accu-Wedge, 3Z4P38 � � � � �$ 6.89

Pivot and takedown pins with easy-to-grasp, oversized heads make separating upper and lower receiver halves fast and easy. Simply grasp the large, button style head and disengage the pin—no fumbling for a punch and scratching the receiver. Pin

shafts are designed to lock as securely as factory pins. Perfect for the shooter who mounts different top ends for different applications on a single lower receiver. Precision machined, heat-hardened steel with long-wearing mil spec Parkerized finish. abSPECS: Steel, matte black finish. Set of 1 front pivot pin, 1 rear takedown pin. Fits receivers with .250" (6.3mm) diameter pivot and takedown pins.


EZ PULL PIVOT & TAKEDOWN PIN SETEasy, Fast Separation Of Upper & Lower

Receiver Halves

#100-003-690AV EZ Pull Takedown Pin Set, 9A15C51 � � � $ 17.49

Handy kits gather up all the small parts needed to complete a functional upper receiver. Eliminates the hassle of tracking down every component separately, including hard-to-find pins and springs, so you can start a custom build knowing you won’t be held up waiting for that one part you forgot to order. Select the stripped upper, barrel, gas block, flash hider, bolt/carrier, and handguard you want, then purchase the completion kit to fit the handguard style and gas system length. Each kit con¬tains original factory parts, so you can install parts made by the manufacturer of your receiver. AR components from one man¬ufacturer will fit another manu-facturer’s receiver, but fitting may be required. Use Standard (STD) kits with GI-style snap-on handguards. Includes gas tube, delta ring, handguard retainer ring, barrel slip ring spring, forward assist assembly, ejection port cover assembly, flash hider crush washer, peel washer, and all required pins, springs, and clips. Use Free Float (FF) kits with free-float forends that attach to the barrel nut and do not require delta ring handguard attachment system. Includes gas tube, for¬ward assist assembly, ejection port cover assembly, flash hider crush washer, and peel washer, plus pins, springs, and clips. abSPECS: Carbine – 93/4" (24.8cm) gas tube length. Mid-Length – 113/4" (29.9cm) gas tube length. Rifle – 151/8" (38.4cm) gas tube length.

COLT - Factory parts just like those used to produce U.S. military issue M16 rifles and M4 carbines. Kits available to fit carbine, mid-length, and rifle gas systems with Standard or Free Float handguard.#080-000-610AV Upper Rec’r Parts Kit, STD Carbine,

6A153P79� � � � � � � � � � � � � � � � � � � � � � � � � $ 166.99#080-000-609AV Upper Rec’r Parts Kit, STD Mid-

Length, 6A115D99� � � � � � � � � � � � � � � � � 136.99#080-000-608AV Upper Rec’r Parts Kit, STD Rifle,

6A154N19 � � � � � � � � � � � � � � � � � � � � � � � � 167.99#080-000-597AV Upper Rec’r Parts Kit, FF Carbine,

6A125M99 . . . . . . . . . . . . . . . . . . . . . . . . 137.99#080-000-596AV Upper Rec'r Parts Kit, FF Mid-Length,

6A93P39 � � � � � � � � � � � � � � � � � � � � � � � � � 102.99#080-000-599AV Upper Rec’r Parts Kit, FF Rifle,

6A128C79 � � � � � � � � � � � � � � � � � � � � � � � � 141.99

DPMS - Factory parts used in the popular Panther™ rifle series available for carbine, mid-length, and rifle gas systems with Stan-dard or Free Float handguards.#080-000-607AV Upper Rec’r Parts Kit, STD Carbine,

1C59E19 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 63.99#080-000-605AV Upper Rec’r Parts Kit, STD Mid-Length,

1C55C99 � � � � � � � � � � � � � � � � � � � � � � � � � � 58.99#080-000-604AV Upper Rec’r Parts Kit, STD Rifle,

1C59N19 � � � � � � � � � � � � � � � � � � � � � � � � � � 66.99#080-000-616AV Upper Rec’r Parts Kit, FF Carbine,

1C49C99 � � � � � � � � � � � � � � � � � � � � � � � � � � 55.99#080-000-594AV Upper Rec’r Parts Kit, FF Mid-Length,

1C42B99 � � � � � � � � � � � � � � � � � � � � � � � � � � 45.99#080-000-593AV Upper Rec’r Parts Kit, FF Rifle-Length,

1C46B59 � � � � � � � � � � � � � � � � � � � � � � � � � � 51.99

AR-15/M16

UPPER RECEIVER PARTS KITS

The Small Parts You Need To Assemble A Complete Upper

Tempered stainless steel shims help eliminate play between re-ceiver halves for a tighter fit to help restore accuracy and reduce noise in older rifles. Install as many shims as needed on the pivot pin to reduce side-to-side movement. Sold in 10-Paks. abSPECS: Stainless steel, heat-hardened. 10 shims per set.


RECEIVER SHIMSEliminates Unwanted Play Between Upper &

Lower Receiver

#713-000-108AV Upper/Lower Receiver Shims, 3A18J75 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 24.99

Firm rubber D-shaped ring surrounds the extractor spring to multiply extractor spring tension by 400%. Easy installation pre-vents virtually all extraction problems associated with AR-15 and M16 firearms. abSPECS: Rubber, black. .068" (1.7mm) thick.

MGI MILITARY AR-15/M16

D-FENDER D-RINGDrop-On Installation Gives A Lifetime Of

Improved Extraction

#741-015-003AV D-Fender D-Ring, 1D9M18 � � � � � � � � � � $ 13.19

Tiny, high-stress synthetic rubber ring slips around the extrac-tor spring to increase extractor tension for more reliable extraction. Eliminates spring “chatter” to prevent malfunctions caused by the extractor slipping off the cartridge rim. Helps ensure positive, con-sistent extraction during rapid-fire sequences. abSPECS: Synthetic rubber. Sold in a pak of 5.

TANK’S RIFLE SHOP AR-15/M16

EXTRACTOR “DONUT”Drop-In Part Helps Ensure Positive, Reliable

Extraction

#901-000-002AV Extractor Donuts, 5-pak, 1K3M66 � � � � �$ 5.29

We’ll Be Your Warehouse

800-741-0015

CALL OFTEN!!

Bravo Company's kit contains of complete suite of mil-spec compatible small parts to finish assembling a lower receiver. It also includes three important upgrades: the BCM PNT™ trigger assem-bly, BCM Mod 3 Pistol Grip, and BCM's Enhanced Triggerguard ab


BCMGUNFIGHTER LOWER PARTS KIT

Complete Set of Small Parts, Including Fire Control & Pistol Grip

#100-018-636AV Enhanced Lower Parts Kit, Blk, 1E111I39 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 119.95

#100-018-637AV Enhanced Lower Parts Kit, FDE, 1E111I39 � � � � � � � � � � � � � � � � � � � � � � � � � � 119.95

Complete kit of all the internal parts, plus the pistol grip, allows you to build or re-furbish on the small-pin lower of your choice. Unified set of compo-nents designed to work together helps ensure proper fit and smooth operation. Engagement surfaces on trigger and hammer are preci-sion ground to give you a crisp letoff without sacrificing reliability. Pistol grip is injection molded from high-impact polymer and offers the streamlined contours of a standard A2-style grip, with a ledge for the second finger, molded in checkering, and deep grooves on the backstrap for improved control under recoil. Separate triggerguard molded from the same high-density polymer is included. abSPECS: Steel, blued finish; injection-molded polymer, black grip. Includes trigger, hammer, disconnector, safety selector lever, bolt catch, maga-zine catch, magazine button, pistol grip, front and rear pivot pins, and all necessary pins, detents, and springs.

BUSHMASTER AR-15

LOWER RECEIVER PARTS KIT

#100-003-639AV Lower Receiver Parts Kit, 9B63H66 � � �$ 74.99

All The Internal Parts Needed To Complete

A Smooth-Functioning,

Reliable Lower

Parts kit contains 17 essential pins and springs for your AR lower receiver. Saves time when as-sembling components for a build and makes a great emergency re-placement kit for small parts that are most often lost or broken. abSPECS: Kit contains: trigger spring,

hammer spring, hammer & trigger pins (2), takedown detent springs (2), disconnector spring, safety selector detent, safety selector spring, bolt catch spring, bolt catch plunger, bolt catch pin, triggerguard pin, buffer retainer, buffer retainer spring, & takedown detents (2)� #100-012-715AV Lower Pin & Spring Kit, 3B12N18 � � � � $ 14.49

17 Critical Parts For Your Lower

CMMG AR-15/M16

LOWER PIN & SPRING KITOur AR-15 lower receiver parts kit contains top-quality, mil-

spec compatible small parts to finish off a lower, except for the fire control group and pistol grip - which most custom builders want to choose separately. Each part is well made, durable and packaged in color coded bags for easy installation. This kit is an excellent choice for building or rebuilding an AR-15 rifle. With this kit, you get the parts you need, without picking up extras to roll around in your "miscel-laneous parts drawer." Contains: takedown pin, receiver pivot pin, takedown pin detent (2) & spring (2), bolt catch, bolt catch plunger/spring/pin, buffer retainer & spring, magazine catch & spring, maga-zine release button, triggerguard assembly & pin, safety selector, selector detent & spring, grip screw & washer. abSPECS: Fits standard, mil-spec, .223/5.56 AR-15 lower receivers.

AR-15/M16

LOWER PARTS KIT

All the Small Parts You Need, Nothing Extra You Don't

#078-000-330AV Lower Parts Kit w/o Fire Control/Pistol Grip, 1Z36J39 � � � � � � � � � � � � � � � � �$ 39.99

72 Sig3 p33-48.indd 46 6/18/2019 11:34:43 AM

AR

-15/M

16


brownells.com

SMA

LL PA

RT

S & K

ITS

Complete kit contains every internal part needed to complete or rebuild an AR lower receiver. High-quality components are de-signed to work in coordination with each other to ensure smooth operation, and they come packaged in color-coded bags that or-ganize related parts for easy assembly. Includes molded-polymer A2 pistol grip and a military-style trigger that offers a conventional, single-stage 6 to 6½ lb. service rifle pull. abSPECS: Kit includes A2-style pistol grip, trigger, trigger spring, hammer, disconnector, hammer/trigger retaining pins, hammer spring, bolt stop and screw, selector, selector detent, bolt catch, magazine catch, maga-zine release button, front pivot pin, rear takedown pin, buffer retainer, triggerguard assembly, and all necessary pins, springs, detent and screws. AR-15/M16 fits mil-spec AR-15/M16 lower receivers. AR-Style .308 fits DPMS LR-308 pattern lower receivers.

CMMG AR-15/M16/AR-STYLE .308

LOWER PARTS KIT WITH TRIGGER

Everything To Complete Or Rebuild A Stripped Lower Receiver; Available With Military Or 2-Stage Trigger

#100-011-594AV AR-15/M16 Lower Parts Kit w/Mil-Spec Trigger, 3B57N53 � � � � � � � � � � � � � �$ 70.99

#100-011-172AV AR-308 Lower Parts Kit w/Mil-Spec Trigger, 3B79L93 � � � � � � � � � � � � � � � � � � � � 88.99

CMMG's Lower Parts Gunbuilder's Kits contain all the parts necessary to complete a stripped AR-15 lower receiver, minus the three most-often cus-tomized components, trigger/hammer, pistol

grip, and triggerguard. Parts list for all kits includes: pivot/take-down pins, takedown pin detent w/spring (2), hammer/trigger pins (2), safety selector, selector detent, magazine catch w/spring, bolt catch w/plunger/spring/spring pin, and buffer retainer w/spring. AR-308 kit has components to fit DPMS LR-308 pattern receivers. Also includes an improved bolt catch and a bolt catch screw in place of the AR-15 pin. ab

The Parts You Need To Complete A Stripped Upper

AR-15 Kit

#100-014-538AV AR-15 Gunbuilder's Kit, 3B31G99 � � � � �$ 41.99#100-014-540AV AR-308 Gunbuilder's Kit, 3B47B62 � � � 55.99

CMMG AR-15/M16/AR-STYLE .308

GUNBUILDER'S LOWER RECEIVER PARTS KITS

Critical offers its lower parts kit in three forms, so you can buy the set of parts that fits your needs, without having little bits left over to rattle around in the spares drawer. Enhanced kit contains everything but the pistol grip, fire control system, and triggerguard. ELG (Enhanced Longitudinal Grind) kit is built around Critical's lon-gitudinally-ground trigger, which is ground in-line with the direction of pull along the long axis of the trigger, and then finish-polished. This gives a smoother pull than a standard mil-spec trigger with reduced grittiness and second, an enhanced basis for performing a trigger job. ELG Complete kit includes the trigger, plus a pistol grip and its mounting bolt ab

CRITICAL CAPABILITIES AR-15/M16

LOWER PARTS KITS

Choose The Kit That's Right for YOUR Needs

#100-500-154AV AR-15 Lower Parts Builder Kit, 3C23Q28 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 30.99

#100-500-155AV AR-15 LPK No Trigger Guard or Grip, 3C47Q48 � � � � � � � � � � � � � � � � � � � � � � � � � � 61.99

#100-500-156AV AR-15 LPK Complete, 3C46L43 � � � � � 62.99

The correct replacement parts for use on a rifle's factory standard plastic handguard. Good idea to swap out these parts when you're installing a new handguard or returning a rifle back to “as issued” configuration. Easier than wrangling a bent or damaged assembly back into service. Why skimp on a critical but inexpensive compo-nent when you can start fresh? Kit includes the Delta ring itself, slip

DPMS AR-15/M16

COMPLETE DELTA RING ASSEMBLYRequired Hardware For GI-Style

Plastic Handguard

#231-000-350AV Delta Ring Assembly, 3B10A03 � � � � � $ 13.19

High-quality parts kit includes all necessary components minus the stock and buffer system to complete a stripped lower receiver or rebuild an old gun that’s worn out. Kit includes complete fire control group with pins and springs, bolt catch assembly, magazine catch assembly, front pivot pin, rear takedown pin, both takedown pins and detents, trigger guard pin, pistol grip with screw and washer, buffer detent, and the buffer detent spring. abSPECS: Steel, matte black finish. Fits all standard mil-spec pattern AR-15 receivers. Buttstock, buffer tube, buffer and spring not included.

DOUBLE STAR

LOWER RECEIVER PARTS KIT

Convenient Pack o’ Parts You Need To Complete A Stripped Lower

#100-010-669AV Lower Receiver Parts Kit, 2Z62G86 � $ 69.99

Conven ien t kit of genuine Colt factory parts includes all the

small parts needed to finish a small-pin AR-15 lower receiver, and install the trigger group and pistol grip of your choice. Or, use the kit to rebuild the worn internals of an old rifle and restore it to like-new function and reliability. The single-manufacturer source—the company that developed the original AR-15/M16 platform and built them for the U.S. military—means the kit parts are designed to work together and will require minimal fitting. Also includes an Accu-Wedge, a high-density rubber insert that fills the space behind the takedown pin to prevent unwanted movement between the receiv-er halves. Helps the rifle shoot tight, consistent groups. abSPECS: Fits small pin (.154" diameter), mil-spec lower receivers and AR-style .308 rifles that use AR-15 trigger groups. Kit contains bolt catch pin, bolt catch plunger, bolt catch spring, buffer retainer, buffer retainer spring, selector lever, selector detent, hammer/trigger pins (.154" O.D.), mag catch, mag release button, mag release button spring, pistol grip lock washer, pistol grip screw, .250" front pivot pin, .250" rear takedown pin, 2 takedown pin detents, 2 takedown pin detent springs, triggerguard, trig-gerguard pivot pin, bolt catch, ejector/selector spring, and Accu-Wedge. Does not include trigger, hammer, disconnector, or pistol grip.

COLT AR-15

FACTORY LOWER RECEIVER PARTS KITGenuine Colt Internal Parts

To Complete A Stripped Lower

Receiver

#080-000-606AV Colt Lower Receiver Parts Kit, 6A140M39 � � � � � � � � � � � � � � � � � � � � � � � � $ 149.99

Genuine DPMS parts are the perfect choice to complete or re-pair your rifle - and great for putting together an emergency field repair kit. All parts fit DPMS LR-308 upper receivers. Firing Pin is hard-chromed with a silver finish. ab

BOLT/CARRIER REPAIR KIT - Contains the most necessary parts to keep your rifle’s bolt in good re-pair. Includes: one each (1) firing pin, firing pin retain-ing pin, cam pin, extractor, extractor pin, two each (2) extractor springs, and three each (3) gas rings.#231-000-289AV Bolt/Carrier Repair Kit, 3B47H31 � � � � $ 54.99

CHARGING HANDLE - Genuine DPMS charging handle for LR-308 rifle. Left-side release with standard length latch; 6061 T6 aluminum, anodized finish, matte black.#231-000-267AV Charging Handle, 1C39E68 � � � � � � � � � $ 44.99

FLASH SUPPRESSOR - Standard, A2-style “bird-cage” flash suppressor for your AR-308. Solid bot-tom helps reduce dust signature when shooting prone. Steel, black finish, fits barrels with 5/8"-24 tpi threads. Crush washer sold separately below.#231-000-295AV Flash Suppressor, 1C19A02 � � � � � � � � $ 20.99#080-001-253AV 5/8" Crush Washer , 3G3J39 � � � � � � � � 3.99

DPMS AR-STYLE .308 UPPER RECEIVER SUB-ASSEMBLY PARTS

Factory Replacement Parts For Repair Or Building A Custom Rifle

STOCK # CAM PIN PRICE#231-000-284AV Cam Pin 1C6D23 $ 7.49#231-000-293AV Delta Ring 1C14G71 $ 20.99#231-000-294AV Delta Ring Assembly 1C18G98 $ 26.99#231-000-269AV Ejection Port Cover 1C13J58 $ 16.49#231-000-270AV Ejection Port Cover Pin 1C2D38 $ 3.99#231-000-286AV Ejector 1C3N99 $ 5.19#231-000-287AV Extractor Pin 1C4J16 $ 4.89#231-000-280AV Firing Pin 1C10E19 $ 12.09#231-000-279AV Firing Pin Retaining Pin 1C7J00 $ 8.99#231-000-291AV Snap Ring 1C2I67 $ 4.49#231-000-292AV Weld Spring 1C10B39 $ 13.99

DPMS AR-STYLE .308 UPPER RECEIVER SMALL PARTS

ring, and slip ring spring. abSPECS: Steel, black oxide finish.

The easiest way to stock and sell genuine, mil-spec AR-15 parts, or use to assemble rifles on your receivers. Much lower in total cost than buying the parts one at a time. All kits listed contain only new, current-production, genuine, mil-spec parts; never pull-offs or direct-exchange surplus. abSPECS: Unassembled kits packaged in heat-sealed, poly bags, labeled for resale. Fits AR-15 only.

A2 UPPER RECEIVER PARTS KIT - Kit includes: charging handle assembly, A2 rear sight assembly, forward as-sist assembly, and ejection port cover assembly.#231-115-002AV Upper Receiver Kit,

1C60C26 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 69.99

LRPK-SP LOWER RECEIVER PARTS KIT - Just add a hammer, trig-ger, and pistol grip of your choice. Kit includes trigger spring, trig-ger pin, hammer spring, hammer pin, disconnector and spring, bolt catch, bolt catch plunger, bolt catch spring, bolt catch roll pin, selector, selector detent, selector detent spring, (2) takedown de-tents and springs, pivot pin, rear takedown pin, buffer retainer and spring, magazine catch, button and spring, screw and washer, trig-gerguard assembly and pin.#231-000-258AV LRPK-SP Lower Rec’r Parts Kit, 3B35I38 � � $ 44.99

LRPK-1 COMPLETE LOWER RECEIVER PARTS KIT - Includes ev-erything listed in the kit above, plus a mil-spec trigger, hammer, and A2 pistol grip.#231-115-003AV AR-15 Lower Parts Kit w/Trigger,

3B60C34 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 68.99

LRPK-LTG LOWER RECEIVER PARTS KIT - Contains just the basic small parts plus an A2 pistol grip, with no trigger, hammer, or dis-connector parts. Kit contents: A2 pistol grip, screw and washer; bolt catch, plunger, roll pin, and spring; magazine catch, button, and spring; selector, detent, and spring; front pivot pin and rear takedown pin; (2) takedown de-tents and springs; buffer retainer and spring; triggerguard and roll pin.#231-000-305AV LRPK-LTG Lower Rec’r Parts Kit,

3B34E89 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 45.99

DPMS AR-15 PARTS KITSSub-Assembly, Mil-Spec Parts Packaged In Money-Saving Kits

Thirty six of the most often needed parts to replace those broken, lost or just worn out. Restore performance and function, keeps rifle operational. abSPECS: Kit contains: (1) firing pin, (1) ex-tractor, (1) disconnector, (1) disconnec-

tor spring, (3) firing pin retainer pins, (1) extractor pin, (1) ejector, (1) ejector roll pin, (3) bolt gas rings, (1) rear takedown pin .250", (1) front pivot pin .250", (2) trigger pins, (1) takedown detent, (2) selector detents, (1) gas tube roll pin, (1) triggerguard pin, (1) bolt catch roll pin, (1) forward assist pin, (1) rear base spring pin, (1) extractor spring, (1) front sight spring, (1) forward assist spring, (1) magazine catch spring, (1) buffer retainer spring, (2) detent springs, (1) selector spring, (1) hammer spring, (1) bolt catch spring, (1) ejector spring.

DPMS AR-15 ULTIMATE REPAIR KITReplace Worn Parts, Restore Lost

Performance

#231-000-026AV AR-15 Ultimate Repair Kit, 3B30M51 $ 37.99

72 Sig3 p33-48.indd 47 6/18/2019 11:34:47 AM

AR

-15

/M16


SINCE 1939

SMA

LL P

AR

TS

& K

ITS

All the internal parts you need to turn a stripped LR-308 (or equivalent) lower re-

ceiver into a fully functional bottom half, ready for assembly to the upper receiver and buttstock. Or, use to rebuild the worn internals of an old rifle and restore it to like-new function and reliability. Eliminates the hassle of scrounging up the parts one by one, plus single-man-ufacturer source means the kit parts are designed to work together and will require minimal fitting. Kit includes the complete fire-control system with trigger, trigger spring, disconnector, .153" diameter ham-mer/trigger retaining pins, hammer spring, bolt stop, bolt stop screw, selector, selector detent, bolt catch, magazine catch, magazine re-lease button, front pivot pin, rear takedown pin, buffer retainer, and all necessary pins, springs, detents, and screws. Also included is a polymer A2-style pistol grip and an extra-weight hammer for positive ignition of .308 ammo. Also available without trigger. abSPECS: Steel, matte black finish. Fits DPMS LR-308 series lower receivers and compatible .308/7.62mm lowers, including Remington and Patriot Ordnance Factory.

DPMS AR-STYLE .308

LOWER RECEIVER PARTS KITFull Set Of Internal

Parts Needed To Complete A Stripped

.308 Lower

#231-000-250AV AR-308 Lower Parts Kit w/Trigger, 3B65G88 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 78.99

#231-000-334AV AR-308 Lower Parts Kit w/o Trigger, 3B30P42 � � � � � � � � � � � � � � � � � � � � � � � � � � 39.99

Don’t let a broken part spoil your hunt or ruin an important match. Conve-

nient, pre-packaged kit contains selected DPMS and Yellow Tavern Custom Shoppe parts most often required for emergency field re-pairs. Contains: (1) pivot pin, (1) pivot pin spring, (3) bolt gas rings, (2) bolt catch pins, (1) bolt catch spring, (1) buffer retainer pin, (1) buffer retainer spring, (1) buffer spring (CAR), (1) buffer spring (STD), (1) carrier key screw, (2) disconnector springs, (1) ejector, (2) ejector pins, (1) ejector spring, (1) ejection port cover spring, (1) extractor, (1) extractor spring, (1) extractor pin, (1) firing pin, (3) firing pin re-taining pins, (1) flash suppressor lock washer,(2) forward assist pins, (1) forward assist spring, (1) front sling swivel rivet (black), (1) front sight detent spring, (2) gas tube roll pins, (1) hammer/trigger pin, (2) hammer springs, (1) handguard retainer ring, (1) mag catch spring, (1) pistol grip star washer, (1) pistol grip screw, (2) trigger springs, (1) takedown pin (not mil-spec), (1) takedown pin spring, (2) takedown/selector detents, (2) triggerguard pins, (1) A-1 sight drum pin, (1) A-1 sight drum spring and (4) A2 windage knob pins. abSPECS: Parkerized finish. Take down pins - .250" diameter.

AR-15 FIELD PARTS KITEssential Parts For

Emergency Repairs

#078-060-015AV AR-15 Field Repair Kit, 8G60L99 � � � � $ 64.99

Designed for the armorer or gunsmith who services a lot of ARs, this extensive kit includes the key components for both the upper and lower receiver to keep your customers’, depart-ment’s, or agency’s AR-15s ready for action. Also great for doing multiple builds as well as for replacing parts that have been damaged in use or been lost during installation. Handy insurance to make sure you always have a replacement part when you need one. abSPECS: Kit includes: 5 each - hammer, hammer spring, trigger, trigger spring, triggerguard, triggerguard roll pin, disconnector, disconnector spring, safety selector, magazine latch, magazine release button, maga-zine release spring, bolt catch, bolt catch plunger, bolt catch spring, bolt catch roll pin, front and rear takedown pins, extractor, ejector, ejector spring, grip screw, and washer. 10 each - trigger and hammer pin, buffer retainer, buffer retainer spring, cam pin, firing pin retaining pin, extractor spring, extractor buffer, and black extractor O-ring. 20 each - takedown pin spring and detent. 30 each - bolt gas rings.

/DOUBLESTAR AR-15/M16

ARMORER’S SMALL PARTS KITConvenient Bulk Kit With The Parts You Need To Keep AR-

15s Running

#084-000-374AV AR-15 Armorer’s Small Parts Kit, 4H502Q86 � � � � � � � � � � � � � � � � � � � � � � � $ 599.99

Genuine, Mil-spec quality small pins, springs, washers and screws for the AR-15/M16 that wear out, break, or just get lost. Great for creating your own emergency parts kits. Or

get our economical pre-made Kit I contains one each of every part listed in the table. Kit II contains all the parts in the table plus the following: front sight detent, extractor pin, buffer retainer, bolt catch buffer, takedown/pivot pin detent, mag catch button, selector de-tent, hammer/trigger pins and crush washer. abSPECS: Springs - steel, music wire or stainless steel wire. Parts sold 5 per pack.

TTI INTERNATIONAL AR-15/M16

MIL-SPEC SMALL PARTSReplacement Pins, Springs

& Rings Keep Your AR Shooting

STOCK # BOLT CATCH PIN PRICE#989-015-004AV Bolt Catch Pin 9H3C99 $ 5.09#989-015-005AV Bolt Catch Spring 9H2P42 $ 4.29#989-015-006AV 5 paks of (3) Bolt Gas Rings 9H8N15 $ 12.49#989-015-007AV Buffer Retainer Spring 9H3G39 $ 4.29#989-015-008AV CAR Buffer Spring 9H16P65 $ 21.99#989-015-009AV STD Buffer Spring 9H16A65 $ 21.99#989-015-012AV Ejection Port Cover Spring 9H3K52 $ 6.19#989-015-013AV Ejector Retainer Pin 9H2N42 $ 3.79#989-015-014AV Firing Pin Retainer Pin 9H2C71 $ 4.19#989-015-015AV Flash Suprsr Lock Washer 9H2J39 $ 3.29#989-015-016AV Forward Assist Pin 9H2G57 $ 3.99#989-015-020AV Gas Tube Pin 9H2I39 $ 3.19#989-015-022AV Mag Catch Spring 9H3D39 $ 4.29#989-015-023AV Pivot Pin Spring 9H2M51 $ 4.19#989-015-024AV Takedown Pin Spring 9H2L51 $ 3.99#989-015-027AV Triggerguard Pin 9H2B59 $ 4.79#989-015-029AV Pistol Grip Screw 9H3N99 $ 5.19

AR-15 firing pin features proprietary NiB-X coating that gives superior lubricity, corrosion-resistance and surface hardness of Rc-70. Fits all standard AR-15s. abSPECS: Steel with Nickle-Boron coating.

WMD GUNS AR-15/M16

NIB-X™ FIRING PIN

Nickle-Boron Coating Resists Wear & Corrosion

#100-011-238AV NiB-X Firing Pin, 3C14P52 � � � � � � � � � $ 16.99

Replacement firing pin made of high-grade stainless steel hard-ened to Rc 42-45, so it will help keep your AR running in extreme operating conditions. Exceptional strength to resist to breakage, and an incredibly hard nitride coating to resist surface wear. abSPECS: 17-4 stainless steel, hardened to Rc 42-45, black nitride coating. Fits standard mil-spec AR-15/M16/M4 bolt.

RUBBER CITY ARMORY AR-15/M16

ENHANCED FIRING PIN

Made Of Upgraded Materials For Maximum Strength & Durability

#100-012-435AV Enhanced Firing Pin, 9D15H00 � � � � � � �$ 19.39

Genuine AR-15/M16 parts made to military speci-fications by a government contractor. These often- re-

placed parts are supplied in individual bags. abSPECS: Gas tubes, stainless steel. Pins, steel. Knobs, aluminum.

J. DEWEY AR-15/M16

MIL-SPEC PARTSGenuine Mil-Spec Individual Parts

STOCK # ITEM PRICE#234-901-020AV Long Gas Tube (20" bbl) 9Z10K82 $ 13.79#234-901-016AV Short Gas Tube (16" bbl) 9Z11E06 $ 13.59#234-902-100AV Take Down Pin 9Z5P28 $ 7.79#234-902-250AV Pivot Pin (.250" dia.) 9Z3C89 $ 5.09#234-902-101AV Bolt Cam Pin 9Z5Q23 $ 8.59

Quality-made, original-style, chrome pin. Perfect for replace-ment of worn or damaged pins; great for building new rifles. Small collar fits all carriers. abSPECS: Steel, chrome. Fits AR-15 and M16.

DPMS AR-15/M16 FIRING PINOEM Quality For Long Life

#231-000-005AV AR-15 Firing Pin, 1C6M99 � � � � � � � � � � � � $ 8.29

#100-025-740AV AR-15 Lower Parts Kit, 7B49G00 � � � � $ 49.00 100-030-497AV AR-15 Lower Parts Kit w/Grip,

7B55P00 � � � � � � � � � � � � � � � � � � � � � � � � � � 55.00

Geissele's kits contain all the parts necessary to get your low-er receiver operational - minus the trigger components. Geis-sele is renowned for superbly designed, meticulously manufactured products, and these parts meet their high standards. Items in the AR-15 Lower Parts Kit are manufactured to "mil-spec" (M16/M4) dimensions to ensure optimum fit and function in your AR rifle or carbine. The fire control system - trigger, hammer, disconnector (and pins) - may be the most "personal" part of any custom AR-15. Along with the pistol grip, it’s the area most customizers and custom builders prefer to se-lect very carefully. As a result Geissele omits both components from one version of the kit; the other version still omits the fire control parts but comes with an A2 pistol grip and its mounting hardware. Either way, you don’t have to spend money on parts you won’t use! abSPECS: Both kits include: bolt catch, bolt catch plunger/spring/roll pin, mag release, mag release button, mag release spring, buffer retainer spring, buffer retainer, safety, safety detent & spring, triggerguard & roll pin, pivot & takedown pins, takedown detents & springs. #100-030-497 adds plastic A2 pistol grip, grip screw and washer.

GEISSELE AUTOMATICS AR-15

LOWER PARTS KITNecessary Internal

Components To Repair/Build/Rebuild a Custom Rifle

item

Absolutely the easiest way to keep genuine Mil-spec AR-15 replacement parts in your shop and available for your customers. A complete selection of springs, pins and parts, ready to hang on a wall or display rack for easy sales. abSPECS: Steel and spring steel. Matte finish.

AR-15 PIN KIT - Contains one each of the following pins: pivot pin, takedown pin (not Mil-spec), hammer/trigger pin, bolt catch pin, forward assist pin, triggerguard pin, gas tube roll pin, extrac-tor pin, ejector pin, firing pin, retaining pin, A2 sight roll pins (3), takedown;selector detents (2).#231-015-001AV AR-15 Pin Kit, 3B14F53 � � � � � � � � � � � � � $ 17.99

AR-15 SPING KIT - Contains one each of the following springs: trigger spring, hammer spring, ejector spring, extractor spring, bolt catch spring, disconnector spring, selector spring, takedown spring (2), mag catch spring, front sight spring, ejection cover spring, forward assist spring.#231-015-002AV AR-15 Spring Kit, 3B8L13 � � � � � � � � � � � $ 10.29

AR-15 REPAIR KIT - Contains one each: hammer spring, trigger spring, extractor, extractor return spring, firing pin, ejector pin, ejector, firing pin, retaining pin, disconnector spring.#231-015-003AV AR-15 Repair Kit, 3B24C40 � � � � � � � � � $ 30.99

DPMS AR-15

SPRING, PIN & REPAIR KITSGenuine Mil-Spec Parts On Convenient

Blister Pak Cards

Standard crush washer (not a peel washer!) for adjusting the gap between the rear of the muzzle

device and the shoulder on the barrel behind the threads. Make sure the cupped face points toward the muzzle. Two sizes to choose from for AR-15s and AR-style .308s. ab


CRUSH WASHERSTraditional-Style Washers for Ensuring Proper

"Timing" of Muzzle Device

#100-028-048AV .223/5.56 Crush Washer, 1/2"-28 tpi, 3D1Q66 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 2.34

#100-028-067AV .308/7.62 Crush Washer, 5/8"-24 tpi, 3D2J14 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.81

Factory original, fire con-trol parts keep your select-fire Colt M16/M4 shooting reliably, so you’ll be prepared to face intensive tactical operations with the con-fidence of knowing your weapon won’t let you down. These parts are precision engineered and manufactured to strict quality control standards from the finest materials for correct fit in your gun. All NFA rules apply. abSPECS: Steel. Matte black finish.

Factory Replacement Parts For Military & Law

Enforcement Applications

#160-000-366AV Cam/Burst, A2, 6A17B35 � � � � � � � � � � � � $ 25.99#160-000-367AV Clutch Spring, A2, 6A3L48 � � � � � � � � � � 5.89#160-000-375AV Disconnect Spring, 6A2K82 � � � � � � � � � 3.99#160-305-103AV Hammer Spring, 6A3D99 � � � � � � � � � � � 4.89#160-000-368AV Hammer Spring/3-Shot Burst, A2,

6A2P57 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.99#160-000-371AV Key & Bolt Carrier, A2, 6A111H65 � � � � 136.99#160-000-369AV Trigger & Disconnect Spring Assy., A2,

6A29B33 � � � � � � � � � � � � � � � � � � � � � � � � � � 34.99

COLT M16/M4

FULL-AUTO PARTS

72 Sig3 p33-48.indd 48 6/18/2019 11:34:51 AM


brownells.com

AR

-15/M

16SM

ALL P

AR

TS &

KIT

S

Every bit of unnecessary weight on a tactical or competition rifle slows you

down just a bit more. V Seven's lightweight ejection port doors do the job of the original factory part but weigh only half as much. Aluminum door is made from 7075 T6 alloy and is about 45% lighter (about 8.3 grams) than the mil-spec steel door. It's Type III hardcoat anodized to resist corrosion and comes with V Seven's Titanium plunger and stainless steel roll pin. Titanium door is made from Grade 2 Titanium that gets the weight down to 11.4 grams and is even more corrosion resistant. Comes in natural silver-gray finish to give your rifle a unique modern appearance. Titanium plunger and stainless roll pin included. Port Door Rod sold separately and recommended for use with both V Seven ejection port doors. ab


ULTRA-LIGHT EJECTION PORT DOORShave Off a Little More Weight, Give

Your Rifle a Unique Appearance

#100-500-039AV AR-15 Ultra-Light Ejection Port Cover Blk, 7G00NJS � � � � � � � � � � � � � � � � � � � � � � �$ 33.95

#100-500-028AV AR-15 Ejection Port Cover Ti Raw, 7G55K99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 55.99

#100-500-023AV AR-15 Ejection Port Cover Rod Blk, 7G9L22� � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.22

Ejection port covers are engraved with colorful slogans to per-sonalize your AR in a unique way. The engraving is on the inside of the cover, so when it’s closed, your gun retains its stock appearance. These are top-quality, all-steel covers made to the correct dimen-sions for proper fit and function on any mil-spec upper receiver. abSPECS: 1045/1055 cold-rolled carbon steel, Parkerized, black. Comes with detent and detent spring installed; hinge pin, spring, snap ring re-quired (sold separately). Fits standard .223/5.56mm AR-15/M16 upper receivers. Not for use on Rock River Arms 9mm or Uramex .22 LR.

HARFORD AR-15/M16

ENGRAVED EJECTION PORT COVERS

Engraved Slogans Personalize Your Rifle

STOCK # SLOGAN/IMAGE#100-005-625AV “Zombie Hunter”#100-005-626AV “Don’t Tread On Me”/ U.S. Flag#100-005-627AV Greek Lettering (“Come Take Them”)#100-005-628AV “Don’t Run/You’ll Only Die Tired”#100-005-629AV “Infidel”#100-006-138AV “Smile, Wait For Flash”#100-006-139AV “Si Vis Pacem, Para Bellum”#100-007-210AV “Get Some”#100-007-211AV Double Skull#100-008-018AV Marines Corps Seal/“USMC”#100-008-021AV Marines Corps Seal/“Semper Fidelis”#100-008-019AV “Veritas Aequitas”#100-008-020AV “Dead Men Tell No Lies”#100-008-022AV “Liberty or Death”#100-006-141AV “Infidel”/U.S. Flag

— Advise # — Engraved Ejection Port Cover, 3Z5H40 � � � $ 8.59

Parkerized steel ejec-tion port cover is engraved with “Let It Rain!!” on the inside. Slogan is invisible with cover closed to retain the stock ap-pearance. Ready to install in any mil-spec upper receiver. abSPECS: Steel, Parkerized, black. Fits mil-spec .223/5.56mm caliber AR-15/M16 upper receivers. Comes with detent and detent spring installed; hinge pin, spring, and snap ring.

BLACK RAIN ORDNANCE AR-15/M16

ENGRAVED EJECTION PORT COVERPersonalize Your AR

#100-007-004AV “Let It Rain!!” Ejection Port Cover, 1G17C69 � � � � � � � � � � � � � � � � � � � � � � � � �$ 21.99

Sometimes you do have to sweat the small stuff. This kit contains the small parts you need to complete your AR15 upper receiver: forward assist, including spring and roll pin, ejection port cover door, port cover rod with C-clip and spring. Of course, to fully "complete" the upper, you'll need a charging handle, sights, barrel, handguard, and bolt/carrier group. With Aero Precision's kit, your build won't be held up because you're missing the "small stuff." ab


UPPER PARTS KITCritical, Oft-

Forgotten Small Parts You've Gotta Have To Finish the

Build

#100-019-269AV AR-15 Upper Parts Kit, 3E13Q76 � � � � � $ 18.39

Replicates the shape for forward as-sist on early M16A1 rifles. Larger surface area makes the forward assist easier to operate and gives your rifle a unique appearance. Made of heat-treated ord-

nance steel to prevent gouging of bolt carrier or excess wear on the pawl. Does not include spring or roll pin. abSPECS: 4140 ordnance steel, manganese phosphate finish, matte black. Fits standard mil-spec AR-15 upper receiver.

BUSHMASTER AR-15/M16

TEARDROP FORWARD ASSISTEasy To Operate & Gives Your Rifle A

Classic G.I. Look

#100-015-495AV Teardrop Forward Assist, 9B17Q07 � � $ 21.99

Convenient, one-stop kit contains the complete forward assist and ejection port cover assemblies, including small bits. Forward as-sist assembly includes plunger, spring, and roll pin installed. Ejection port cover comes fully assembled with pin, spring, and C-clip in-stalled. Both components fit standard, mil-spec upper receivers plus most machined billet receivers that accept mil-spec parts. Ejection port cover assembly also available separately. abSPECS: Fits stripped AR15/M16 upper receivers.

DPMS AR15/M16

UPPER COMPLETION KITKey Components

Necessary To Finish Building An

Upper

#231-000-373AV Upper Completion Kit, 1C16L48 � � � � � $ 20.99#231-000-359AV Ejection Port Cover Assembly,

1C4F70 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5.99

#100-028-066AV A3 Upper Rec'r Parts Kit, 3D14G73 � � � � $ 15.93#100-028-062AV Forward Assist Assembly, 3D10H49 � � � 11.23#100-028-063AV Forward Assist ONLY, 3D9N28 � � � � � � � 10.33#100-028-061AV Forward Assist Spring, 3D0P58 � � � � � � � .93#100-028-060AV Ejection Port Cover Assy, 3D5L89 � � � � 6.57#100-028-058AV Ejection Port Cover, 3D4P34 � � � � � � � � � 5.17#100-028-057AV Ejection Port Cover Pin, 3D1K00 � � � � � 1.41#100-028-056AV Eject Hinge Pin Snap Ring, 3D0E58 � � � .93#100-028-059AV Ejection Port Cover Spring, 3D0P58 � � .93

LUTH-AR AR-15/M16

A3 UPPER RECEIVER SMALL PARTS

The forward assist and ejection port cover are small, utilitarian parts - but you can't finish a stripped upper without them. You can buy a complete kit with the whole schmear, separate kits for the forward assist and ejection port cover, or even individual parts, as listed below. The Kit is for A3 flattop uppers (basically just about any upper without a carry handle) and contains all the parts for the forward assist and port cover door: the whole forward assist as-sembly, spring, and retaining pin PLUS the ejection port cover door, retaining pin, spring, and "C" clip to keep the pin in place. Forward Assist comes assembled and consists of plunger, pawl, pawl, de-tent, detent spring, and pawl pin. Forward Assist Assembly adds to the forward assist the spring and retaining pin needed to install it on the receiver. Note: the forward assist button itself is the later, round, "bullseye" style found on current-production rifles, not the "teardrop" style of early Colt AR-15s and M16s. Ejection Port Cover Assembly consists of port cover, C-clip, spring, and rod. ab

Necessary Parts to Complete a Stripped Upper

V Seven's forward assist is constructed from ultra-hard, yet light, 7075 T6 aluminum, with a durable Type III hardcoat anodized finish that adds surface strength and resists wear. Ratchet is made of heat-treat hardened 4140 steel, so it delivers a lifetime of service without giving out. Spring and roll pin included. ab


ULTRA-LIGHT FORWARD ASSIST

Add To Your Rifle's Unique Look Without Adding Unwelcome

WeightBullseye

#100-500-033AV UL Fwd Assist, Bullseye, 7G28M13 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.13

#100-500-034AV UL Fwd Assist, Diamonds, 7G28Q13 � � � � � � � � � � � � � � � � � � � � � � � � � � 28.13

Diamond Texture

Compatible with Mil-Spec stocks, this kit contains all the necessary parts to mount a stock assembly onto your lower receiver. Six position buf-fer tube is machined from 7075 T6 aluminum to Mil-Spec dimensions with a Type III hardcoat anodized finish. Machined, high carbon steel castle nut is heat treated for extra strength and given a phosphate finish for durability. Kit also contains a standard 3 oz. carbine buffer and a carbine action spring made of high-tensile steel. abSPECS: Buffer Tube - 7075-T6 aluminum, hard coat anodized Type III finish. Carbine Buffer - 3 oz. (85g) wt. Castle Nut - Steel. Carbine Spring - High-tensile steel.

BRAVO COMPANY AR-15/M16/M4

RECEIVER EXTENSION KITAll-In-One, Mounting

Hardware Kit For Adjustable Buttstock

#100-014-185AV Rec'r Extension Assy Kit, 1E55H93 � � � �$ 57.99

Machined from 7075 T6 alu-minum, Pistol Receiver Extension tube is compatible with the Sig Sauer SB-15 Stabilizing Brace. Hardcoat anodized tube accepts carbine buffer and action springs. Pistol Receiver Extension Kit includes a castle nut, carbine buffer, carbine action spring, and QD receiver end plate. All NFA rules apply. abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black. 7 1/4" (18.2cm) long, 1 1/4" (3.1cm) O.D.


PISTOL RECEIVER EXTENSION TUBEPerfect For A Custom

AR Pistol Build

#100-016-339AV Pistol Receiver Extension, 1E36B17 � � $ 38.99#100-016-338AV Pistol Rec'r Extension Kit, 1E53C81 � � 57.99

Convenient kit contains all the components needed to mount the buttstock of your choice on an AR-15 rifle or carbine. Perfect for stock conversions such as altering a rifle to accept a collapsible carbine stock. All parts are manufactured from the highest quality materials and held to strict dimensional tolerances for proper fit and function. Kits available for the four standard buttstock types. A1 rifle kit contains receiver ex-tension tube, recoil buffer, recoil buffer spring, and buttstock cap screw. A2 rifle kit adds to A1 kit contents the correct buttstock spacer required for A2 rifle stocks. Carbine kits contain receiver extension, carbine recoil spring, carbine recoil buffer, lock ring, and receiver plate. Commercial carbine kit comes with 1.17" O.D., six-position re-ceiver extension for use with commercial or “universal” buttstocks. Mil-Spec kit has a 1.14" O.D., receiver extension for correct fit of military M4 carbine buttstocks. M4 buttstocks and clones will not fit Commercial tubes. Available in both 5- and 6-position models. abSPECS: Receiver Extension & A2 Stock Spacer – Aluminum, anodized, matte black. Recoil Buffer – Aluminum and steel. Spring, Lock Ring, Receiver Plate – Steel. Kits fit standard, mil-spec AR-15/M16/M4 lower receiver and clones. Installation instructions included.

AR-15/M16

STOCK COMPLETION KITSFor Secure Installation Of Almost Any Rifle Or

Carbine Buttstock

#080-000-553AV A1 Rifle Stk Completion Kit, 8K50E99 � �$ 54.99#080-000-554AV A2 Rifle Stk Completion Kit, 8K56L39 � � 59.99#080-000-556AV Commercial Carbine Stock

Completion Kit, 8K46E99 � � � � � � � � � � � 49.99#080-000-555AV Mil-Spec 5-Pos. Carbine Stock

Completion Kit, 8K37F99 � � � � � � � � � � � 39.99#080-001-039AV Mil-Spec 6-Pos. Carbine Stock

Completion Kit, 5A46J99 � � � � � � � � � � � 49.99

AR

-15

/M16


SINCE 1939

SMA

LL P

AR

TS

& K

ITS

Convenient kits contain all the com-ponents needed to securely mount the

buttstock of your choice using original factory parts from the man-ufacturer of your receiver. Eliminates the hassle of tracking down every part and accidentally getting incorrect ones for your stock. Have everything you need to finish your build, so you won’t be held up waiting for that one part you forgot to order. Each kit contains original factory parts; parts from one manufacturer will fit another manufacturer’s receiver but may require minor fitting. Select the buttstock you want (available separately), then purchase the mount-ing kit for that type of stock. A2 Rifle kit is for mounting any fixed rifle buttstock based on the military M16A2 stock. Kit includes receiver extension tube, recoil buffer, buffer spring, buttstock spacer, and buttstock screw. Mil-Spec Carbine kit is for adjustable-length car-bine buttstock that requires M4-type 1.14" O.D. buffer tube. Includes receiver extension tube, carbine recoil buffer, buffer spring, receiver plate, and lock nut. abSPECS: A2 Rifle – Receiver extension: 101/8" (25.7cm) OAL. Mil-Spec Carbine – Receiver extension: 71/4" OAL (18.4cm), 1.14" O.D. Six locking positions for buttstock, unless otherwise indicated.

COLT - From the original manufacturer of the M16 battle rifle. A1 Rifle, A2 Rifle, and Mil-Spec Carbine kits available. Carbine kit con-tains the four-position receiver extension used on the Colt M4 and Law Enforcement carbines.#080-000-625AV Buttstock Mounting Kit, A2 Rifle,

6A109N79 � � � � � � � � � � � � � � � � � � � � � � � � $ 119.99#080-000-620AV Bttstk Mounting Kit, Mil-Spec

Carbine, 6A103I99 � � � � � � � � � � � � � � � � 109.99

DPMS - Factory parts used in the popular Panther™ rifle series. A2 Rifle and Mil-Spec Carbine kits available.#080-000-627AV Buttstock Mounting Kit, A2 Rifle,

1C56D39 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 59.99#231-000-338AV Buttstock Mounting Kit, Mil-Spec

Carbine, 1C48L33 � � � � � � � � � � � � � � � � � � 61.99

AR-15/M16

BUTTSTOCK MOUNTING KITSAll The Original

Factory Parts Needed To Install Rifle &

Carbine Buttstocks

The Foxtrot Mike Products 9mm receiver extension assembly is a complete, one-stop package with everything you need to lay the foundation to install an adjustable, M4-type carbine stock on your 9mm-chambered AR-15. It includes the extension (buffer tube) itself, made from an extremely strong yet lightweight 7075 T6 alumi-num extrusion. The tube is hardcoat anodized to resist surface wear, before application of a dry film lube coating that aids in smooth movement of the buffer inside and the stock outside. Mil-spec (1.14" O.D.) tube accepts M4-type adjustable carbine stocks and provides 6 notches for setting stock position. Stainless steel music wire recoil spring helps ensures reliable cycling with all loads. The Foxtrot Mike 9mm Heavy Buffer of the correct weight (6.5 oz.) and size (extra-long - no spacers required) to properly cycle blowback operated 9mm AR-15s with minimal bolt bounce. It’s made of pre-hardened 8620H carbon steel that’s "H" rated to ensure greater core hardness than standard 8620 steel. ab

FM PRODUCTS AR-15

9MM RECEIVER EXTENSION ASSEMBLY

Everything To Make Your Pistol-Caliber AR Ready for an Adjustable Stock

#100-026-161AV "AR-9" Receiver Extension Assembly, 6D44M99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 44.99

These handy kits contain what you need to install your preferred buttstock on an AR-15 rifle or carbine, and have the correct innards to ensure reliable, glitch-free cycling of the bolt/carrier assembly. The heart of each kit is the receiver extension, often called the "buf-fer tube." Different receiver extensions require different buffer/buf-fer spring combinations, so another benefit of these kits is that they ensure you have the correct-weight buffer and a spring with the proper level of tension to keep your AR running reliably. All parts are manufactured from the high-quality materials and held to strict dimensional tolerances for proper fit and function. Tubes are ex-truded aluminum with a tough, hardcoat anodized finish. Buffers have aluminum shells with tough polymer shock-absorbing tips and steel and/or tungsten weights inside. Rifle kits contain the receiver extension, rifle length/weight buffer, and rifle buffer spring for fixed, non-adjustable rifle stocks. These are correctly identified as "A1" kits because they DO NOT include the spacer required for the longer A2 buttstock (we do sell spacers separately, elsewhere). The upper stock screw that attaches the stock to the rear of the receiver exten-sion tube is also NOT part of the kit. Get the A1 screw for an A1 stock, the A2 screw for the A2 stock - screws are sold separately below. Carbine kits contain an M4-type receiver extension with 6 locking notches for the stock, carbine recoil spring, carbine recoil buffer, lock ring, and receiver end plate. Mil-Spec tubes have a the original 1.14" O.D. of U.S. military carbines. Commercial tubes have the larger 1.17" O.D. of civilian commercial or "universal" M4-type stocks. If you're not sure what stube your stock fits, measure before order-ing. (Yes, a Commercial stock will fit a Mil-Spec tube, but it will likely be loose and wobbly - not something you want on a buttstock!) Receiver extension tubes are also sold separately below as stand-alone components. Buffer Retainer fits inside the lower receiver to capture the buffer and buffer spring. Parkerized steel part; fits all makes and models of AR-15/AR-style .308. Buffer retainer spring IS required, sold separately below. ab


RECEIVER EXTENSION KITS

Complete Assembly for Secure Installation of Stock & Reliable Cycling of Action

#100-028-010AV AR-15 A1 Rifle Rec’r Extension Kit, 3D36Q88� � � � � � � � � � � � � � � � � � � � � � � � � � $ 45.07

#100-028-009AV AR-15 Carbine Rec’r Extension Kit, Mil-Spec, 3D39I58 � � � � � � � � � � � � � � � � � 46.95

#100-028-008AV AR-15 Carbine Rec’r Extension Kit, Commercial, 3D38P34 � � � � � � � � � � � � � 46.01

#100-028-023AV AR-308 Rifle Rec’r Extension Kit, 3D46N64 � � � � � � � � � � � � � � � � � � � � � � � � � � 61.09

#100-028-021AV AR-308 Carbine Rec’r Extension Kit, Commercial, 3D61B30 � � � � � � � � � � � � � 73.27

#100-028-022AV AR-308 Carbine Rec’r Extension Kit, Mil-Spec, 3D62M53 � � � � � � � � � � � � � � � � 74.21

#100-028-011AV AR-15 Rifle Rec’r Extension ONLY, 3D18F06 � � � � � � � � � � � � � � � � � � � � � � � � � � 22.55

#100-028-013AV AR-15 Mil-Spec Carbine Rec’r Extension ONLY, 3D20C65 � � � � � � � � � 24.39

#100-028-012AV AR-15 Commercial Carbine Rec’r Extension ONLY, 3D19E41 � � � � � � � � � � 23.45

#100-028-029AV AR-15 "A1" Rifle Buttstock Upper Screw, 3D2I20 � � � � � � � � � � � � � � � � � � � � � 2.81

#100-028-030AV AR-15 "A2" Rifle Buttstock Upper Screw, 3D4M02 � � � � � � � � � � � � � � � � � � � 4.69

100-028-034AV AR-15 Recoil Buffer Retainer, 3D1H15 � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.69

#078-101-117AV AR-15 Buffer Retainer Spring, each, 8G0J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 1.99

Rifle KitCarbine Kit

item

All-in-one kit lets you quickly mount an M4-style receiver extension to accept the ad-justable buttstock of your choice. Extruded aluminum buffer tube comes with carbine buffer, buffer spring, castle nut, and end plate sling adapter. Features six positions for stock length adjustment and unique “no bind” sling attachment that gives 180° of motion. Mil Spec and Commercial models available. abSPECS: Extruded 7075 T6 aluminum, matte black finish. Includes carbine buffer, spring, castle nut and sling plate adapter. Mil-Spec - 71/4" (18cm) long. 1.14" (2.8cm) O.D. Commercial - 73/4" (19cm ) long. 1.17" (2.9cm) O.D.

All The Parts For Converting Fixed-Stock Rifle To M4

Carbine Stock

#100-010-861AV M4 Carbine Receiver Extension Kit, Mil-Spec, 5A55L11 � � � � � � � � � � � � � � � � � �$ 59.99

#100-010-862AV M4 Carbine Receiver Extension Kit, Commercial, 5A49N77 � � � � � � � � � � � � � � 52.99

TAPCO AR-15/M16 M4 CARBINE RE-CEIVER EXTENSION KIT

Specifically designed to fit the Sig Sauer pistol brace, this heavy duty buffer tube is machined from 7075 T7 billet aluminum and fea-tures a raised shoulder to prevent the brace from moving forward. For added versatility, tube comes with an oil and chemical resistant nitrile foam pad for a comfortable shooting experience when not using the brace. Buffer Tube comes with castle nut, end plate, and foam pad. Kit also includes a buffer spring, carbine buffer, and an accessory plug which allows you to store batteries, small extra parts, or cleaning supplies inside the brace. abSPECS: 7075 T7 billet aluminum, anodized mil-spec Type 3 finish, black. 73/8" (18.7cm) OAL, 11/4" (3.2cm) dia.


HEX 2 PISTOL BUFFER TUBECan Be Used Alone Or With A

Pistol Brace

#100-015-813AV Hex 2 Pistol Buffer Tube, 1C54F79 � � � �$ 59.99#100-015-812AV Hex 2 Pistol Buffer Tube Kit,

1C74N24 � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.95

Machined aluminum buffer tube assembly gives your AR-style pis-

tol a neat, finished look. Nitrile foam rest padding resists chemicals, abrasions and temperatures from -20° F to 220° F. Includes mil-spec endplate and castle nut; accepts a mil-spec carbine buffer and spring. All NFA rules apply. abSPECS: Aluminum, hardcoat anodized, matte black. 73/8 " (18.7 cm) long. 11/4" (3.1cm) O.D. Tube comes with endplate and castle nut. Complete Assembly includes tube, endplate, castle nut, recoil spring, and carbine buffer.


PISTOL BUFFER TUBEFoam-Covered Tube

For A Custom AR-Style Pistol

#100-009-954AV Pistol Buffer Tube, 1C42E81 � � � � � � � � � �$ 47.99#100-009-927AV Pistol Buffer Tube Complete

Assembly, 1C62G16 � � � � � � � � � � � � � � � � � 73.99#100-011-385AV Pistol Buffer Tube Foam Cover, Only,

1C6C50 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.00

Collapsible buttstock similar to the current USGI M4 carbine stock provides convenient six-position length-of-pull adjust¬ment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 ri-fle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buf-fer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Commercial (nominal 1.17" O.D. ) or Mil-Spec (nominal 1.14" O.D.) receiver extension tube. Stock interior diameter is matched to buffer tube O.D. for a snug fit that eliminates unwanted play and rattles. abSPECS: Aluminum and fiberglass-reinforced, injection-molded nylon, matte black. 83/4" (22.2cm) OAL collapsed; 113/4" (29.9cm) OAL fully extended.

AR-15/M16

M4 BUTTSTOCK

#080-000-545AV Collapsible Buttstk, Commercial, 8K73D99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 79.99

#080-000-941AV Collapsible Bttstk, Mil-Spec, 8K55J99 � � 59.99

Rugged, Six-Position Adjustment For L.O.P. & Easy Storage

If you want the final, finishing touch to complete the look of your CAR-15 carbine reproduction, then our XM177 CAR Buttstock is a must-have. The predecessor for the modern-day M4 adjustable car-bine buttstock, the XM177 CAR stock is a perfect reproduction of the original design used on the early XM177 and CAR-15 designs, but this stock looks great and fits onto any standard modern AR-15 platform. Constructed of reinforced, molded polymer (the originals were alu-minum). Mil-Spec fits older USGI-type (nominal 1.14" O.D.) receiver extension/buffer tube. Commercial fits modern (nominal 1.17" O.D.) tube; will also fit mil-spec buffer tube, but the fit will be loose so the stock won't provide maximum stability. But it'll look right. ab

Early-Style CAR-15 Buttstock for a Truly Authentic "Retro" Carbine Build

#078-000-374AV XM177 CAR Bttstk, Commercial, 9B18N79 � � $ 19.99 078-000-498AV XM177 CAR Bttstk, Mil-Spec, 1B36B67 � � 39.99

AR-15/M16

XM177 CARBINE BUTTSTOCK

Classic, fixed buttstock style can serve as a replacement for a stock that’s seen better days or to convert to a style better suited to the kind of

shooting you do. Originally developed for the U.S. military’s M16A2 rifle, this type of stock has a lightweight yet rigid foam plastic core, with a durable outer shell of tough fiberglass-reinforced molded polymer. Polymer buttplate has aggressive diamond texturing and trapdoor with spring-loaded catch for easy access to internal stor-age compartment. Includes receiver extension tube, spacer, recoil buffer, buffer spring, and toe-mounted 11/4" sling loop. Same high-quality stock that DPMS Panther LR-308 rifles leave the factory with, and they’ll also fit similar AR-style .308s, including Armalite® AR-10®, Knight SR-25, and Patriot Ordnance Factory P-308. Comes fully as-sembled and ready to install, with correct-weight buffer and buffer spring for proper cycling of weapons firing .308/7.62mm ammo. abSPECS: Fiberglass reinforced molded polymer over foam core, medium gray. 105/8" (27cm) O.A.L., 5" (12.7cm) high at buttplate. Fits DPMS Panther LR-308, Armalite® AR-10®, Knight SR-25, Patriot Ordnance Factory P-308, and similar AR-style .308 rifles.

DPMS AR-STYLE .308

A2-Style Fixed ButtstockReady To Install, With

Correct-Weight Buffer & Spring

#231-000-247AV A2-Style Fixed Bttstk, 3B90E33 � � � � � $ 106.99

STO

CK

S

AR

-15/M

16


brownells.com

Traditional-length rifle buttstock features an easy-to-open storage compartment for emergency field tools, parts, or a Brownells AR-15 Buttstock Cleaning Kit. Fits both A1 and A2. abSPECS: Injection-molded, heat-stabilized fiberglass-reinforced nylon polymer, black. 93/8" (23.8cm) long, 5" (12.7cm) high at tallest point, 21/8" (5.4cm) high at shortest point, 15/8" (4.1cm) wide.

CAVALRY ARMS AR-15/M16

BUTTSTOCKMil-Spec Quality, Durability & Appearance

#100-000-939AV AR-15 Rifle Stock, 2K39F45 � � � � � � � � � $ 45.99

<<>fotos: 100016337cmyk.tif should be set smaller, like an inset<>><>>Carbine stock combines light weight with minimal bulk - ideal for competition or tactical operations, especially those involving frequent ingress/egress from vehicles. It still provides a comfortable, supportive cheekweld, while a gen-erous synthetic rubber recoil pad ensures secure shoulder placement. The exterior is smooth and free of protrusions or sharp edges that can snag the sling, the shooter’s other MOLLE gear, or objects inside the ve-hicle. Includes two ambidextrous QD swivel sockets plus a con-ventional sling attachment slot. New-design steel adjustment latch ensures the stock’s interface with the receiver extension cannot be obstructed by dirt or debris, while providing increased torsional strength over conventional pins. The VBOST (Vehicle Borne Opera-tions Sling Tab) works with the shooter’s riggers’ band or bungee to secure the sling against the stock when the rifle is not in use, another useful benefit when operating inside a vehicle. With all these features, the BCMGunfighter stock still weighs a mere 7 oz., so the vast increase in versatility it gives your rifle doesn’t come with the penalty of weighing you down. abSPECS: Reinforced, high strength-to-weight-ratio molded polymer, steel latch. Fits mil-spec receiver extension with 1.14" O.D. Kit includes an M4-type carbine receiver extension tube, buffer spring, buffer, castle nut, and QD swivel mount end plate. Extension tube - 7075 T6 aluminum extrusion, hard-anodized, matte black.

Secure Shooting Support In A Light, Minimal-Profile Package

#100-016-238AV BCMGunfighter Stk, Blk, 1E53B50 � � � �$ 55.99#100-016-239AV BCMGunfighter Stk, FDE, 1E53H50 � � � 55.99#100-016-337AV BCMGunfighter Stk Kit, Blk, 1E108B94 � � 113.99

Stock Kit


BCMGUNFIGHTERTM STOCKDouble Star's line of Ace aluminum-framed buttstocks are ideal

for tactical and competition. They are lightweight, compact, and fast-handling - ideal for dynamic shooting environments - while still offering =surprisingly comfortable and stable shooting plat-forms. ab

ARFX SKELETON STOCK - A light-weight, fast handling stock for sport-ing, tactical and competition use. Gives three sling attachment points. Uses your existing A2 fixed stock buffer tube as the top tube to keep weight to a mini-mum. Closed-cell foam sleeve provides a soft, comfortable cheek weld, plus in-sulates your face from vibration and in-clement weather. Sleeve is formulated to withstand cleaning solvents and gun oils, UV radiation, freezing tempera-tures, salt water and rough handling. Machined aluminum buttplate is drilled and tapped for the rubber recoil pad (in-cluded). Comes with 1.25" sling swivel that can be mounted in any one of four positions. Standard ARFX is 10" (25.4cm) long when installed. Kit includes stock, rubber recoil pad, foam sleeve, sling swivel, and necessary hardware. Installation requires A2 buffer tube, buffer, and spring. Compact ARFX-E Entry-Length stock is only 7¼" (18.4cm) long without the included rubber recoil pad installed. Kit includes stock, recoil pad, buffer tube, foam sleeve, and neces-sary hardware. Carbine recoil buffer and spring required, available separately. SPECS: 6061-T6, heat-treated, aircraft grade aluminum, Type 3 mil-spec hard-anodized, matte black. #100-000-809AV ARFX Skeleton Stock, 2Z88C57 � � � � � $ 99.99#100-015-269AV ARFX-E Entry-Length Skeleton Stock,

2Z100Q24 � � � � � � � � � � � � � � � � � � � � � � � � � 113.99

AR-UL ACE ULTRALIGHT STOCK - Car-ries the ARFX concept a step further by eliminating the aluminum bar on the underside of the stock, resulting in just about the lightest, least bulky stock you'll ever find for your AR. Still engineered to provide a secure, stable interface with the shoulder. Uses an A2 rifle receiver extension tube (not included - available separately) as the backbone of the stock, thoroughly reinforced by an machined billet aluminum gus-set at its weakest point directly behind the receiver. The machined aluminum buttplate clamps directly to the receiver extension and accepts the included rubber recoil pad. Gusset has a sling swivel mounting point on each side (swivel included); buttplate also has a machined-in sling loop. Foam sleeve slides over the receiver ex-tension for a comfy cheekweld. Approx. 10" OAL when installed. #100-015-270AV AR-UL Ultralight Stock, 2Z79Q94 � � $ 101.99

M4 SOCOM STOCK - Tactical stock features a full 2" of length adjustment. Quick-release button switches the stock length to five different positions. Soft foam cover on tube provides a comfort-able cheekweld. Also features three, 11/2" wide sling slots, a rubber recoil pad, and receiver end plate with ambidextrous attachment points for HK-style single-point clip-on slings. There’s even a machined-in hammer on the butt for breaching doors and hand-to-hand combat. Precision-machined from a solid, heat-treated, aluminum billet for superb durability and strength. Quick release button can be replaced with the included machine screw to con-vert it into a rock-solid, fixed-length stock. Available in Carbine or Long Extension Tube lengths.SPECS: 6061-T6 heat-treated, aircraft grade aluminum, Type 3 mil-spec hard-anodized, matte black. Includes 1/2" thick, rubber recoil pad and screws. Carbine - 71/2" (19cm) OAL collapsed, extends to 91/2" (24cm) OAL. 101/2" (27cm) L.O.P. collapsed, extends to 121/2" (32cm) L.O.P. Long Exten-sion Tube Model - 10" (25.4cm) OAL collapsed, extends to 12" (30.1cm) OAL. 1313/64" (33.5cm) L.O.P. collapsed, extends to 1513/64" (39cm) L.O.P.#100-001-173AV M4 SOCOM Carbine Stk, 2Z179J83 � � $ 203.99#100-001-174AV M4 SOCOM Long Ext. Tube Stock,

2Z211A57 � � � � � � � � � � � � � � � � � � � � � � � � � 216.99

DOUBLE STAR AR-15/M16 ACE STOCKSLight & Strong For Fast Handling In Extreme Environments

Carbine Shown

Entry-Length (assembled)

AR-UL (A2 buffer tube not included)

ARFX w/½" Recoil Pad

Currently employed by the U.S. military, this reinforced polymer stock fits M4-type receiver extensions and offers an improved cheekweld designed for increased comfort

and consistency. Two waterproof storage compartments running the length of the stock hold 2 AA or 3 CR-123 batteries. Streamlined contours resist snagging on clothing, equipment, or vegetation to aid in safe and stealthy operation. Sure-Grip stock latch ensures convenient and intuitive length-of-pull adjustment, while the anti-slip rubber recoil pad secures the weapon to the operator’s shoulder. Features a black, stainless steel QD swivel mount and two molded 11/4" wide sling slots. Bravo model retains same basic features of the SOPMOD. Angled buttplate tips inward at the toe for better use with body armor; does not have stock storage com-partments. Government Issue model is an exact duplicate of the SOPMOD stock produced by B5 Systems for the U.S. Department of Defense. It does not have the QD sling swivel sockets found on the commercial SOPMOD stocks listed here, and not commercial logos/markings. Gives added accuracy to a clone/replica build. abSPECS: Fiberglass-reinforced polymer, Black, Flat Dark Earth (FDE), O.D. Green, Wolf Grey, Coyote Brown, or Multi-Camo. 71/4" (18.6cm) OAL, 4.9" (12.4cm) high. 12.4 oz. (352g) wt. Fits mil-spec 1.14" O.D. M4-type buffer

B5 SYSTEMS AR-15/M16/M4

SOPMOD STOCKImproves Cheekweld & Provides

Waterproof Storage For Small Items

#100-009-033AV SOPMOD Stock, Black, 4H90A05 � � � � $ 95.00#100-016-915AV SOPMOD Stock, FDE, 4H90L05 � � � � � 95.00 100-029-286AV SOPMOD Stock, ODG, 4H89N43 � � � � 95.00#100-016-916AV SOPMOD Stk, Wolf Grey, 4H90F05 � � 95.00 100-028-999AV SOPMOD Stock, Coyote Brown,

4H89E43 � � � � � � � � � � � � � � � � � � � � � � � � � � 95.00#100-016-917AV SOPMOD Stk, Multi-Camo, 4H105H95 � � 110.00#100-011-669AV Bravo SOPMOD Stk, Blk, 4H54J57 � � � 58.00#100-016-918AV Bravo SOPMOD Stk, FDE, 4H54K57 � � 58.00 100-029-288AV Bravo SOPMOD Stk, ODG, 4H54Q06 � � 58.00#100-016-919AV Bravo SOPMOD Stock, Wolf Grey,

4H54P57 � � � � � � � � � � � � � � � � � � � � � � � � � � 58.00 100-029-287AV Bravo SOPMOD Stock, Coyote Brown,

4H54K06 � � � � � � � � � � � � � � � � � � � � � � � � � � 58.00#100-016-920AV Bravo SOPMOD Stock, Multi-Camo,

4H70P63 � � � � � � � � � � � � � � � � � � � � � � � � � � 73.00 100-027-684AV Gov't Issue SOPMOD Stk, Blk, 4H89P43 � � 95.00 100-027-685AV Gov't Issue SOPMOD Stk, FDE, 4H89G43 � � 95.00

Items

tubes. Buffer tube, buffer spring, latch plate, and castle nut not included. Bravo - 71/8" (18.25 cm) OAL, 47/8" (12.4 cm) high. 8.9 oz (252.3g) wt.

Ergonomically advanced substitute for the M4-type carbine buttstock gives the shooter a comfortable, repeatable cheekweld and a secure fit to the shoul-der for superb control of the rifle. Mold-ed from reinforced industrial-grade polymer, the stock is designed to fit tightly - no lock or tensioning device required! - without the rattle and lateral movement common to collapsible buttstocks. Soft, overmolded rubber on top for a se-cure, non-slip cheekweld. Comes with two interchangeable recoil pads, a .8" thick convex pad and a .5" thick concave pad. Choose the pad - or use none at all - that works best with the clothing and gear you are wearing. Limited rotation QD sling swivel sockets on each side enable quick sling attachment/remove. abSPECS: Fiberglass-reinforced hard polymer, with overmolded rubber chee-kweld area, black or brown. 7" (17.8cm) long, 51/2" (13.9cm) tall, 13/4" (4.4cm) wide. 8 oz. (226.8g) wt. Fits mil-spec buffer tubes with 1.14" O.D. only.


COLLAPSIBLE BUTTSTOCKLightweight, Secure, Comfortable

To Shoulder - No Rattles, No Wobble

#100-015-025AV Collapsible Buttstock, Blk, 8K68I00 � � $ 68.00#100-015-026AV Collapsible Buttstock, Brown,

8K68N00 � � � � � � � � � � � � � � � � � � � � � � � � � � 68.00

Stock, pistol grip, and vertical grip form an ergonomically engi-

neered, integrated system that makes your AR more comfortable to shoot and easier to control. Overmolded, soft-touch, textured, rubber on grasping surfaces gives you a positive hold and elimi-nated hard edges. DD's Collapsible Buttstock replaces M4-style stocks and provides significant enhancements. Gives comfortable, repeatable cheekweld, and won't wobble or rattle. Comes with in-terchangeable rubber recoil pads, so you can customize to your needs. Limited-rotation QD sling swivel sockets. Pistol Grip has the same angle as 1911 pistol's grip for familiar, natural hand position; oversized integral triggerguard completely fills the gap between grip and lower receiver, eliminates for roll pins for simplified installation. Vertical Foregrip clamps to Picatinny rail and offers a comfortable fit to the hand, thicker in the middle than at the ends. Waterproof, dual O-ring sealed internal storage compartment for small items. abSPECS: Glass-filled polymer, black or brown. Stock fits mil-spec buffer tubes with 1.14" (2.8cm) O.D. only.

Loaded With Ergonomic

Enhancements For Maximum Comfort &

Control

#100-017-088AV Furniture Set, Black, 8K109N00 � � � � $ 109.00#100-017-089AV Furniture Set, Brown, 8K109E00 � � � � 109.00


FURNITURE SET

STO

CK

S

Talk about keeping it simple! By com-bining the stock and buffer tube, the Sa-bertube keeps your AR light, trim, and ma-neuverable. Even the castle nut has been eliminated to save weight. The unique dimpled surface pattern further reduces weight without sacrificing structural strength AND it'll get your rifle noticed at the range. Fully machined from high-grade aluminum alloy billet, with a matte black Type III Class 2 hard-anodized finish for added surface strength and resistance to corro-sion. Fits standard mil-spec AR-15 lowers with captive takedown pin spring. Includes end plate for with socket for QD pushbutton sling swivel. Each Combo contains the Sabertube, LBS lightweight buttstock, and endplate. You supply the exact buffer/spring setup you need for your AR rifle/carbine/pistol/SBR. Rifle-Length combo comes with a 9.25" buffer tube that accepts a standard RIFLE buffer/spring inside. Mid-Length combo accepts a CARBINE buffer/spring inside and sports an 8.125" Sabertube that's a bit shorter than the rifle model. Left/right side positionable sling swivel socket at the rear of the LBS. Endplate NOT included. QD Mid-Length combo adds to the basic Mid-Length combo the endplate with QD socket for fast sling mounting and dismounting. Pistol Sabertube/Tailhook combo is actually a BRACE for an AR-15 pistol build. The 6.625" long Sabertube take a CARBINE buffer inside and is mated to a Gearhead Works Tailhook Mod 1 pistol brace, plus the QD sling socket end-plate (and some VC-3 threadlocker to hold it all together). This ATF-approved pistol stabilizing brace is NOT classified as a buttstock. ab


SABERTUBE LIGHTWEIGHT BUTTSTOCK COMBO

100-027-481AV Rifle-Length Sabertube Stock Combo, 6D195L00 � � � � � � � � � � � � � � $ 195.00

#100-021-001AV Sabertube Lightweight Buttstock Combo, 6D158D91 � � � � � � � � � � � � � � 165.00

#100-021-002AV Sabertube QD Lightweight Buttstock Combo, 6D174A74 � � � � 179.99

100-027-482AV Pistol Sabertube Tailhook Combo, 6D219B00 � � � � � � � � � � � � � � � � � � � � � � 219.00

Minimialist Stock Gives Unique Appearance & Keeps Weight Down

Items

AR

-15

/M16


SINCE 1939

This fully adjustable buttstock assembly by Luth-AR is a perfect upgrade for your favorite rifle or your latest build. Featuring ad-justment options for length of

pull, as well as vertical and lateral adjustment of the butt plate, you can create a fit that is truly your own. The Luth-AR adjustable butt-stock assembly also features a bottom Pica-tinny rail for additional accessories and a set screw which enables you to lock your stock in your favorite position, while at the same time eliminating any possible rattle. Will fit

commercial and mil-spec buffer tubes. Works with all .223/5.56 and most .308 AR type rifles. Comes with a black medium soft butt plate. NOT interchangeable with A2 standard buffer tube. The Luth-AR adjustable buttstock is constructed of durable lightweight polymer and available in basic black or flat dark earth (FDE). ab

LUTH-AR AR-15

MBA-3 ADJUSTABLE CARBINE STOCKAdjustable Carbine Stock With

a Whole Lot of Adjustability

#100-024-566AV MBA-3 Carbine Stock, Black, 3D129B55 � � � � � � � � � � � � � � � � � � � � � � � � �$ 150.35

#100-024-567AV MBA-3 Carbine Stock, FDE, 3D129H55 � � � � � � � � � � � � � � � � � � � � � � � � � 150.35

LWRC's complete kit sets you up to give your rifle a shorter, more maneuverable, more comfortable adjustable carbine stock than the traditional M4 stock. Hard-polymer stock can be installed on any standard AR-15 lower with the included carbine receiver exten-sion/buffer tube, and is 1" shorter than an M4 stock, with 4 length-of-pull adjustment notches, making your rifle fast handling. Wide top pro-vides a comfortable, secure cheekweld. Pushbotton QD sling sockets enable fast sling mounting and dismounting. One-stoip installation: comes with everything you need to install on your rifle, including buf-fer tube, buffer spring, and buffer, index plate, castle nut. abSPECS: Stock fully extended: 9" (22.8cm) long. Stock fully collapsed: 5.8" (14.7cm) long.

LWRC INTERNATIONAL AR-15/M16

ULTRA-COMPACT BUTTSTOCKMakes Your Carbine More Compact,

More Nimble, Easier To Handle

#100-016-401AV Ultra-Compact Stk Kit, Blk, 2C114I75� �$ 116.99#100-016-402AV Ultra-Compact Stk Kit, FDE, 2C114A75 � � 116.99

Magpul Original Equipment (MOE) carbine buttstock provides the quality, du-rability, and ergonomic benefits of Mag-pul’s CTR® stock in a rugged, economical, drop-in package. Strong, A-frame design is lightweight and comfortable, yet provides

operator with plenty of support. Comb contour is wider than stan-dard issue M4 stock to help shooter maintain a solid, consistent cheekweld. Streamlined exterior and protected release lever won’t snag on clothing, gear, vehicle interior, or vegetation. Heavy duty, spring-loaded release lever allows fast length-of-pull adjustments and won’t dig into your hand. Impact- and heat-resistant, polymer construction includes molded-in reinforcements at stress points, plus two slots for web slings and a hole for a toe-mounted sling swivel or clip-on sling. Soft, synthetic rubber buttpad increases shooting comfort and helps prevent slippage. abSPECS: Reinforced molded polymer. 71/4" (18.4cm) OAL, 51/4" (13.3cm) high. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Mil-Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks. Black, Dark Earth, O.D. Green, or Stealth Gray. Commercial fits larger, 1.17" O.D. commercial carbine buffer tubes. Available in Black only.

MAGPUL AR-15/M16 MOE® BUTTSTOCKEconomical, Drop-In Upgrade For Carbine Collapsible Stock

#100-003-535AV Mil-Spec MOE Bttstk, Blk, 3K34F90 � � � $ 37.95#100-003-536AV Mil-Spec MOE Bttstk, DE, 3K34N90 � � � 37.95#100-003-786AV Mil-Spec MOE Bttstk, ODG, 3K34P90 � 37.95#100-014-407AV Mil-Spec MOE Bttstk, Stealth Gray,

3K34C90 � � � � � � � � � � � � � � � � � � � � � � � � � � � 37.95#100-011-398AV Mil-Spec MOE Bttstk, Pink, 3K34J90 � � 37.95#100-003-538AV Commrcl MOE Bttstk, Blk, 3K34N90 � � 37.95

The MBA-4 is the ideal buttstock for your favorite AR carbine. It's comfortable and lightweight, and also aesthetically pleasing!

Designed to fit both commercial and mil-spec buffer tubes and works with all 5.56/.223 rifles and any .308/7.62 AR that uses an AR-15 buffer tube. Bottom Picatinny rail for additional accessories. Flat setscrew allows you to lock your favorite position in while elimi-nating rattles. Comes with a black medium soft rubber buttplate. Uses 4 positions on a 6 position buffer tube. NOT interchangeable with A2 standard buffer tube. If you’re looking for a lightweight polymer skeleton stock, the the MBA-4 is a great option! ab

LUTH-AR AR-15 MBA-4 ADJUSTABLE CARBINE STOCK

Lightweight, Comfortable Shooting Support & Unique Looks

#100-024-568AV MBA-4 Carbine Stock, Black, 3D57J14 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 65.75

Heavy-duty, adjustable stock locks securely at one of 8 different positions to combine

the solid feel of a fixed stock with the versatility of a collapsible. The stock measures 8" from the receiver to the buttplate when collapsed, opening to 12" when fully extended. Exposed cheekpiece on the overmolded extension tube remains stationary to provide a consis-tent cheek weld in all 8 positions. Stock comes with an ambidextrous sling mounting plate, locking nut, and rubber recoil pad. Buffer tube requires a carbine-length spring and buffer, available separately. abSPECS: Reinforced, injection-molded polymer, black. Length - 8" (20.3 cm) collapsed, 12" (30.5cm) extended. 22.8 oz.(645g.) wt. Requires car-bine-length spring and buffer, not included.


ERGO F93 PRO STOCKSolidity Of A Fixed Stock With More LOP Adjustability Than

An M4 Collapsible

#573-000-060AV Ergo F93 Pro Stock, 3G152I85 � � � � � � $ 179.99

Why should carbine shoot-ers have all the fun? Luth's Mod-ular Stock gives AR-15 rifle with A1/A2 buffer tubes a new level of ad-justability in length and comb height. It has an adjustable cheekrest, plus length-of-pull adjustability, yet it is very lightweight. Enhances overall shooting comfort and control for better shot placement and, ultimately, better performance from your rifle. (Also fits AR-style .308 rifles with a standard AR-15 A1/A2 buffer tube.) Includes rubber recoil pad and two QD sling swivel sockets. abSPECS: Glass-filled nylon, black or flat dark earth (FDE). 101/2" long. Cheekrest height adjusts 1". LOP adjusts 11/16". 1 lb. 3 oz. (539g) wt.

LUTH-AR AR-15/M16

MODULAR RIFLE BUTTSTOCKFully Adjustable Or

Minimalist & Lightweight - Your Choice

#100-014-257AV Modular Stock, Black, 3D113I46 � � � � � $ 131.55#100-017-940AV Modular Stock, FDE, 3D113I46 � � � � � � 131.55

Our handy kit contains just what you need to outfit your AR-15/M16 carbine with the basic, most critical components of Magpul's ergonomically-enhanced Magpul Original Equipment (MOE) system. It contains a MOE® buttstock, MOE® M-LOKTM carbine handguard, and standard MOE® pistol grip. All three items are easy to install - like field stripping your gun for cleaning then reassembling - and require no permanent alterations to gun. You can remove the MOE components and reinstall original parts any time. abSPECS: Reinforced molded polymer, Black, Flat Dark Earth (FDE), O.D. Green (ODG), and Gray. Commercial fits 1.17" O.D. commercial buffer tubes. Mil-Spec fits M4-type military-pattern buffer tubes with 1.14" O.D.

Give Your AR A Magpul Makeover In One Swoop

STOCK # TYPE FITS COLOR PRICE#100-017-600AV Commercial 1.17" O.D. Black 3K83D52 $ 108.16#100-017-604AV Mil-Spec 1.14" O.D. Black 3K83B52 $ 108.16#100-017-605AV Mil-Spec 1.14" O.D. FDE 3K83Q52 $ 108.16#100-017-606AV Mil-Spec 1.14" O.D. ODG 3K83H52 $ 108.16#100-017-607AV Mil-Spec 1.14" O.D. Gray 3K83B52 $ 108.16

MAGPUL AR-15/M16

MOE® FURNITURE SETS

Direct replacement for A1- or A2-type stocks brings MOE ergo-nomics and versatility to your fixed-stock rifle. Sloping comb provides a comfortable, secure cheekweld, while keeping the stock’s overall profile slim. Rubberized recoil pad keeps the rifle firmly and comfort-ably against the shoulder. Hinged buttplate opens to reveal a spacious compartment for internal storage of small items. Integral sling loop accepts a 1¼" sling. Also includes front and rear attachment points on both sides for the Type 1 Sling Mount Kit (sold separately) to enable use of slings with pushbutton QD swivels. Two bosses on underside may be knocked out for attachment of an MOE accessory rail (available separately). Accepts Magpul PRS® extended recoil pads. Rifle Stock Kit contains everything needed to convert a rifle with a collapsible, M4-style carbine stock to an MOE Rifle Stock. abSPECS: Injection-molded hard polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. 10½" (26.7cm) OAL. Provides a 13¼" (33.7cm) LOP. 5" (12.7cm) high. Mounts to A1/A2 rifle-length receiver extension tubes. Rifle Stock Kit includes black MOE Rifle Stock, rifle-length receiver extension tube, rifle buffer, and buffer spring.

MAGPUL AR-15/M16

MOE® RIFLE STOCK

#100-009-585AV MOE Rifle Stock, Black, 3K60L77 � � � � �$ 66.45#100-009-586AV MOE Rifle Stock, DE, 3K59Q92 � � � � � � � 66.45#100-009-587AV MOE Rifle Stock, ODG, 3K59D92 � � � � � 66.45#100-014-425AV MOE Rifle Stk, Stealth Gray, 3K59F92 � � 66.45#084-000-386AV MOE Rifle Stock Kit, Blk, 4H107H19 � � � 117.99#084-000-388AV MOE Rifle Stk Kit, DE, 4H107M19 � � � � � 117.99#084-000-389AV MOE Rifle Stk Kit, ODG, 4H107F19 � � � � 117.99#078-000-241AV MOE Rifle Stock Kit, Stealth Gray,

8G107L19 � � � � � � � � � � � � � � � � � � � � � � � � � � 117.99

Drop-In Upgrade For A1/A2 Rifles Or Conversion From A Carbine Stock

The MOE SL (Slim Line) furniture kit is an easy, one-stop way to improve the fit and feel of your AR-15 with the advanced MOE SL buttstock as the centerpiece. The stock has a slop-ing cheek weld for excellent shooter comfort and an angled rubber buttpad with rolled toe to aid in fast, smooth shoulder transitions, even when wearing body armor. The slim MOE SL handguard fits rifles with carbine-length gas systems and an A2-pattern front sight tower. The internal aluminum heat shield keeps the hand cool, even during extended rapid-fire situ-ations, while the front lip and long side extensions shield the hand from the hot gas block. M-LOK slots at the 2, 6, and 10 o'clock posi-tions give plenty of accessory-mounting options. The slim profile and steep angle of the MOE-SL pistol grip gives a short length of pull and brings the control hand closer to the shooter’s body for excellent control in CQB situations. abSPECS: Reinforced molded hard polymer, Black, Flat Dark Earth (FDE), O.D. Green (ODG), Stealth Gray. Handguard - 8.9" (22.6cm) OAL, 1.8" (4.6cm) wide, 2.4" (6.1cm) high. Stock - 7.2" (18.3cm) OAL. Mil-Spec fits rifles with 1.14" O.D. carbine buffer tubes. Commercial fits rifles with larger 1.17" O.D. commercial carbine buffer tubes.

MAGPUL AR-15/M16

MOE® SL™ FURNITURE SETOptimizes Your Rifle For Excellent

Control In Tactical Operations

#100-015-967AV MOE SL Mil-Spec Furniture Set, Black, 3K95H41 � � � � � � � � � � � � � � � � � � � �$ 103.65

#100-015-968AV MOE SL Mil-Spec Furniture Set, FDE, 3K93C61 � � � � � � � � � � � � � � � � � � � � � � � � � � 103.65

#100-015-969AV MOE SL Mil-Spec Furniture Set, ODG, 3K93L61 � � � � � � � � � � � � � � � � � � � � � � � � � � � 103.65

#100-015-970AV MOE SL Commercial Furniture Set, Black, 3K93L61 � � � � � � � � � � � � � � � � � � � � 103.65

#100-015-971AV MOE SL Commercial Furniture Set, FDE, 3K93A61 � � � � � � � � � � � � � � � � � � � � � 103.65

#100-015-974AV MOE SL Commercial Furniture Set, Gray, 3K93B61 � � � � � � � � � � � � � � � � � � � � � 103.65

Steel sling swivel mount allows slings equipped with pushbutton QD swivels to at-tach to the Magpul MOE buttstock (also fits SGA™ Shotgun Stock). Easy-to-install be-

cause it fastens securely to mounting points already molded into both sides of the stock. abSPECS: Heavy-duty phosphate steel, black. Fits Magpul MOE butttocks and SGA shotgun stock. Mounting hardware included. Swivels not included.

Adapts MOE® Stocks For QD Sling Swivels

#100-010-975AV Sling Mount Kit/Type 1, 9Z12L44 � � � � $ 14.20

MAGPUL AR-15/M16

SLING MOUNT KIT – TYPE 1

Enhanced replacement buttstock for M4-pattern carbines is designed to with-stand the rigors of the modern battlefield or tactical competition. Slim comb gives

a sloping cheek weld for a firm fit and excellent shooter comfort. Low-profile, no-snag dual-latch release enables easy length-of-pull adjustment. Premium chrome-silicon locking spring ensures a positive hold on the receiver extension tube. Internal anti-rattle mechanism maintains a snug, wobble-free fit on the tube. Rolled toe and recoil pad allow for easy shoulder transitions and good fit when using body armor. Non-slip rubber recoil pad helps keep the carbine on your shoulder and increases recoil absorption. Two sling mounts give you extra freedom in sling choice. Enhanced Recoil Pad is a direct replacement that adds ½" to the length of pull and even more recoil absorption. Also fits MOE AK and Zhukov-S stocks. abSPECS: Molded polymer, Black, Flat Dark Earth (FDE), O.D. Green (ODG), Stealth Gray. LOP adjustment range: 3.3" (8.4cm). 7.2" OAL. 9.6 oz. (272.2g) wt. Mil-Spec fits mil-spec 1.14" O.D. carbine buffer tubes. Com-mercial fits larger 1.17" O.D. commercial carbine buffer tubes.

MAGPUL AR-15/M16 MOE® SL™ STOCKOptimized For Efficient Shoulder

Transitions, Even With Body Armor

#100-015-169AV Mil-Spec MOE-SL Stk, Blk, 3K52K77 � � $ 56.95#100-015-170AV Mil-Spec MOE-SL Stk, FDE, 3K51M36 56.95#100-015-171AV Mil-Spec MOE-SL Stk, ODG, 3K51I36 � 56.95#100-015-172AV Mil-Spec MOE-SL Stk, Gray, 3K51D36 56.95#100-015-173AV Commercial MOE-SL Stock, Black,

3K51J36 � � � � � � � � � � � � � � � � � � � � � � � � � � � 56.95#100-015-176AV Commercial MOE-SL Stock, Gray,

3K51E36 � � � � � � � � � � � � � � � � � � � � � � � � � � � 56.95#100-018-084AV MOE-SL/AK/Zhukov Enhanced Recoil

Pad, 9Z15M79 � � � � � � � � � � � � � � � � � � � � � 18.95

STO

CK

S

AR

-15/M

16


brownells.com

The MOE SL-S adds on-board stor-age capability to the SL tactical carbine stock, while maintaining the original's slim profile, enhanced cheekweld, and body-armor friendly buttplate. Two O-ring sealed, storage tubes accept extra batteries and other small items. Compartments are waterproof to a depth of 10 meters (32.8 ft.). Fits mil-spec (1.14" O.D.) receiver extensions only. Unique leaf-spring tension system provides a solid fit with slightly less friction than the original SL, while still virtually eliminating wiggle and rattle. ab

MAGPUL AR-15/M16

MOE® SL-S™ CARBINE STOCKSlim Line Stock Wtih Waterproof On-Board Storage For Batteries

#100-018-694AV MOE SL-S, Black, 3K68C49 � � � � � � � � � � �$ 75.95#100-018-695AV MOE SL-S, FDE, 3K68M49 � � � � � � � � � � � � 75.95#100-018-696AV MOE SL-S, Gray, 3K68H49 � � � � � � � � � � � 75.95#100-018-697AV MOE SL-S, ODG, 3K68L49 � � � � � � � � � � � 75.95

Further developing Magpul's original SL stock, the SL-K is designed for com-

pact PDW-style weapons or users who simply desire a small, light, highly maneuverable stock. Drop-in replacement for M4-type ad-justable stocks that fit mil-spec (1.14" O.D.) buffer tubes. It offers a short, slim profile, comfortably sloped cheekweld, a rubber recoil pad with a “rolled” toe for easy shouldering and better fit when wear-ing body armor. Built-in 1.25" sling loop, and also accepts Magpul ASAP® and M-LOK QD Sling Mount (available separately) for push-button QD sling swivels. Ambidextrous latch enables easy exten-sion/retraction of stock, plus it minimizes rattle on the receiver ex-tension without requiring additional locks, levers, or springs. Latch made of steel, too, so it won't fail under hard use. abSPECS: Reinforced injection-molded hard polymer, Black, Flat Dark Earth (FDE), O.D. Green (ODG), or Stealth Gray. LOP adjustment range: 3.3". LOP collapsed: 10.5". LOP extended: 13.8". Fits AR-15/M16/M4 rifles with 1.14" O.D. carbine buffer tubes.

MAGPUL AR-15/M16 MOE® SL-KTM CARBINE STOCKSlim, Maneuverable Tactical

Stock With Plenty Of Versatility

#100-006-740AV MOE SL-K Stock, Black, 3K34J90 � � � � �$ 37.95#100-018-595AV MOE SL-K Stock, FDE, 3K34B90 � � � � � � 37.95#100-018-597AV MOE SL-K Stock, ODG, 3K34M90 � � � � � 37.95#100-018-596AV MOE SL-K Stock, Gray, 3K34H90 � � � � � 37.95

This kit has all the com-ponents to mount the versa-tile MOE adjustable carbine stock to your rifle - includ-ing the stock! Use it to finish a custom build or to convert

a fixed-stock rifle. It’s built around the extremely popular “Magpul Original Equipment” (MOE) carbine buttstock that’s designed for fast action. Comfortable, too, with easy length adjustment, recoil-tam-ing rubber buttpad and a wide comb contour to help you maintain a consistent, solid cheekweld. You get a mil-spec (1.14" O.D.) receiver extension (buffer tube) with the correct-weight carbine buffer and buffer spring, plus end plate and castle nut. ab

AR-15/M16

MAGPUL® MOE® BUTTSTOCK KITEverything You Need To Give Your Rifle An

Adjustable Carbine Stock

Flat Dark Earth

#078-000-216AV MOE Carbine Bttstk Kit, Blk, 8G86N59 � �$ 94.99#078-000-217AV MOE Carbine Bttstk Kit, DE, 8G84P19 � � 91.99#078-000-218AV MOE Carbine Bttstk Kit, ODG, 8G84M19 � � 91.99#100-015-124AV MOE Bttstk Kit, Stealth Gray, 4H84K19 � � 91.99

Add-on aluminum receptacle lets you at-tach a pushbutton QD sling to a Magpul MOE® buttstock. Quickly installs in the webbing slot at the rear of the stock, and accepts both heavy-duty and standard QD sling swivels. Limits sling rotation to prevent wrapping and twisting, keeping your rifle accessible and ready for quick deployment. Rounded edges resist snagging on clothing and equipment. Mounts on either side of stock and blends in seamlessly with overall appearance. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 1.3" (33mm) long. .84" (21mm) wide. .5 oz. (14g) wt. Includes mounting hardware.

IMPACT WEAPONS AR-15/M16

MOUNT-N-SLOT SLING ATTACHMENTEnables Attachment Of A QD Sling To A

Magpul MOE® Stock

#100-008-453AV Mount-N-Slot For MOE Stk, 2C28I57 � � $ 29.99

Hogue’s OverMolded® col-lapsible buttstock features re-inforced polymer construction with a rubber cheek rest and a rubber/polymer hybrid butt pad that provides snag-free shouldering. This unique design creates a snug anti-rattle friction fit that prevents unwanted movement along the buffer tube. The buttstock provides multiple swivel sleeve and sling mounting locations. Fits Mil-Spec buffer tubes. Hogue’s 2 Piece Kit contains a finger grooved beavertail rubber grip and a collapsible buttstock. The beavertail grip is specifically designed to retain the important lines and aesthetics of tactical rifles. It provides a com-fortable grip with palm swells and and features Hogue’s exclusive Cobblestone™ pattern. ab

HOGUE OVERMOLDED CARBINE BUTTSTOCK & GRIP

Adjustable-Length Carbine Stock - Rubber Coated For

Secure, Non-Slip Grip

#408-000-170AV OverMold Carbine Stock & Grip, Black, 8K54B33 � � � � � � � � � � � � � � � � � � � � $ 59.46

#408-000-169AV OverMold Carbine Stock & Grip, Flat Dark Earth, 8K62E10 � � � � � � � � � � � � � � � � 67.96

Molded polymer cheek riser snaps onto Magpul CTR and MOE buttstocks to provide added support and ensure correct eye alignment with open sights or optics for fast target acquisition. Creates a stable

platform for accurate, long-range shooting. Three models let you to raise the cheekweld by 1/4", 1/2", or 3/4" for a personalized fit. No stock modification required. Designed for non-AR installations of CTR/MOE stocks; if installed on AR-15, stock must be left fully extended to allow operation of charging handle. abSPECS: Fiber-filled polymer composite, Black, Flat Dark Earth (FDE), O.D. Green (ODG), and Stealth Gray (Gray). Fits all Magpul CTR and MOE buttstocks

MAGPUL AR-15/M16

CTR®/MOE® STOCK CHEEK RISERRaises The Checkweld For More

Comfortable Shooting; Snap-On Fit

STOCK # HEIGHT COLOR PRICE#100-004-221AV .25" Black 3K15A79 $ 18.95#100-019-337AV .25" FDE 3K15B79 $ 18.95#100-019-339AV .25" ODG 3K15N79 $ 18.95#100-019-338AV .25" Gray 3K13D63 $ 18.95#100-004-222AV .50" Black 3K15M79 $ 18.95#100-019-340AV .50" FDE 3K15D79 $ 18.95#100-019-342AV .50" ODG 3K15E79 $ 18.95#100-019-341AV .50" Gray 3K15E79 $ 18.95#100-004-223AV .75" Black 3K15E79 $ 18.95#100-019-343AV .75" FDE 3K15Q79 $ 18.95#100-019-345AV .75" ODG 3K15F79 $ 18.95#100-019-344AV .75" Gray 3K13D63 $ 18.95

All of the comfort, convenience, and er-gonomic benefits of the Magpul MOE carbine stock for situations where a fixed-length, non-adjustable format is needed. Installs without removing the castle nut or lock plate - just remove the collapsible stock and clamp the MOE Fixed in its place. Comes with two end caps, one standard and one compatible with ASAP® sling adapter. Install Sling Mount Kit - Type 1, sold separately, so you can use pushbutton QD sling. Accepts PRS® extended buttpad, also sold separately. abSPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. 7½" (19cm) OAL. 1½" (3.8cm) wide. 5" (12.7cm) high. Mil-Spec fits 1.14" O.D. buffer tube. Commercial fits 1.17" O.D. buffer tube.

MAGPUL AR-15/M16

MOE® FIXED CARBINE STOCKAll The MOE Ergonomics & Appearance

In A Non-Collapsible Format

#100-011-565AV Mil-Spec MOE Fixed Carbine Stk, Blk, 3K26H37 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 28.45

#100-011-566AV Mil-Spec MOE Fixed Carbine Stk, Dark Earth, 3K26J16 � � � � � � � � � � � � � � � � � � � � � 28.45

#100-011-567AV Mil-Spec MOE Fixed Carbine Stock, O.D. Green, 3K26M16 � � � � � � � � � � � � � � � 28.45

#100-014-414AV Mil-Spec MOE Fixed Carbine Stock, Stealth Gray, 3K26I16 � � � � � � � � � � � � � � � 28.45

#100-011-569AV Commercial MOE Fixed Carbine Stock, Black, 3K26Q16 � � � � � � � � � � � � � � 28.45

Fixed Stock

End Caps

Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb con-tour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. abSPECS: Impact-resistant nylon polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. LOP adjustment range, 31/2" (8.9cm). Mil-Spec - 67/8" (17.5cm) OAL, 51/4" (13.34cm) high. Fits 1.14" O.D. carbine buffer tubes on Colt-manufactured M4 and similar mil-spec carbines. Commercial - 71/8" (21cm) OAL, 51/4" high. Fits 1.17" O.D. commercial carbine buffer tubes.

#078-000-203AV CTR Bttstk Kit, Black, 8G98P99 � � � � � $ 110.99#078-000-204AV CTR Bttstk Kit, FDE, 8G100G19 � � � � � 110.99#078-000-205AV CTR Bttstk Kit, ODG, 8G100P19 � � � � 110.99#078-000-239AV CTR Bttstk Kit Gray, 8G100G19 � � � � � 110.99

CTR BUTTSTOCK KIT - Convenient buttstock mounting kit eliminates the hassle of buying all the parts individually. Kit includes: Magpul buttstock, Mil-Spec aluminum buffer tube, buffer spring, end plate, castle nut, and a recoil buffer. Stocks avail-able in Black, Flat Dark Earth, O.D. Green, or Gray.

MAGPUL AR-15/M16

CTR® BUTTSTOCKLocking System Eliminates “Play”

#100-002-946AV Mil-Spec CTR Bttstk, Blk, 3K49B77 � � � �$ 56.95#100-003-137AV Mil-Spec CTR Bttstk, FDE, 3K51H36 � � � 56.95#100-003-135AV Mil-Spec CTR Bttstk, ODG, 3K51J36 � � 56.95#100-014-416AV Mil-Spec CTR Bttstk, Gray, 3K51F36 � � � 56.95#100-002-982AV Commercial CTR Bttstk, Blk, 3K51Q36 � � 56.95

ab

Adaptable Carbine/Storage (ACS) stock is a drop-in replace-ment for standard USGI M4 col-lapsible stock that gives the tactical operator extra storage options, a secure, comfortable cheekweld, and an advanced dual-locking lever. Smooth, streamlined exterior contours prevent snagging on clothing, sling, or vegetation, and help ensure fast exits from vehicles without snagging on gear. Re-movable battery storage compartments run the full length of the extra-wide comb and hold 2 AA or 3 CR-123 batteries, while pro-viding a wide, contoured area for an exceptionally solid, comfort-able cheekweld. Secure rubber caps keep water and dust out of compartments. Positive-locking trapdoor on right side of the stock reveals a storage compartment for small items. Magpul’s dual lock-ing system uses an additional cam lever to protect the release lever from accidental operation, yet still allows you to adjust length of pull by simply pushing on the release lever. Slot molded in the toe provides an attachment point for a 11/4" wide sling. Also includes the same detachable rubber buttpad found on Magpul CTR® and UBR® buttstocks to help keep stock firmly mounted on shoulder. abSPECS: Reinforced molded polymer. 77/8" (20cm) OAL, 51/4" (13.3cm) high. 13.6 oz. (385g) wt. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Mil Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks. Commercial fits larger, 1.17" O.D. commercial carbine buffer tubes.

ACS BUTTSTOCK KIT - Con-venient buttstock mounting kit eliminates the hassle of buying all the parts individually. Kit in-cludes: Magpul buttstock, Mil-Spec aluminum buffer tube, buffer spring, end plate, castle nut, and a recoil buffer. Stocks available in Black, Flat Dark Earth, or O.D. Green. #078-000-220AV ACS Buttstock Kit, Black,

8G126B19 � � � � � � � � � � � � � � � � � � � � � � � � $ 139.99#078-000-221AV ACS Buttstock Kit, Dark Earth,

8G126E19 � � � � � � � � � � � � � � � � � � � � � � � � 139.99#078-000-222AV ACS Buttstock Kit, OD Green,

8G126D19 � � � � � � � � � � � � � � � � � � � � � � � � 139.99#084-000-400AV ACS Buttstock Kit, Stealth Gray,

4H126M19 � � � � � � � � � � � � � � � � � � � � � � � � 139.99

MAGPUL AR-15/M16

ACS™ BUTTSTOCKDrop-In Replacement For M4

Stock With Storage & Enhanced Comfort Features

#100-003-527AV Mil-Spec ACS Stock, Blk, 3K77H06 � � � $ 85.45#100-003-529AV Mil-Spec ACS Stock, Dark Earth,

3K77L06 � � � � � � � � � � � � � � � � � � � � � � � � � � � 85.45#100-003-784AV Mil-Spec ACS Stock, O.D. Green,

3K77F06 � � � � � � � � � � � � � � � � � � � � � � � � � � � 85.45#100-014-422AV Mil-Spec ACS Stock, Stealth Gray,

3K77H06 � � � � � � � � � � � � � � � � � � � � � � � � � � 85.45#100-003-531AV Commercial ACS Stock, Black,

3K77C06 � � � � � � � � � � � � � � � � � � � � � � � � � � 85.45

ab

Go to the learn tab at www.brownells.com to view videos and

read articles on your gun.

STO

CK

S

AR

-15

/M16


SINCE 1939

The Adaptable Carbine Stock-Light (ACS-L) is a slimmed-down, lightweight version of Mag-pul’s popular ACS™ stock. The ACS-L provides extra maneuverability by

eliminating the ACS’s side storage compartments, while retaining the wide, sloping top for a secure, comfortable cheekweld. Also retained is the storage compartment in the tail of the stock, and the friction locking system that prevents unwanted wobble after extending the stock. Includes a reversible socket for QD pushbut-ton sling swivels and a 1" sling loop molded in the toe of the stock. The .3" thick rubber recoil pad can be replaced by Magpul Tactical Recoil Pads (sold separately). Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. abSPECS: Reinforced molded polymer. 8" (20.32cm) OAL, 21/4" (5.7cm) wide, 51/2" (13.97cm) high. 12.8 oz. (362.87g) wt. Length-of-pull adjust-ment range: 31/4" (8.3cm); 15" (38.1cm) LOP, extended; 113/4" (29.85cm) LOP, retracted. Mil-Spec fits 1.14" O.D. buffer tube. Available in Black, Dark Earth, O.D. Green, or Stealth Gray. Commercial fits 1.17" O.D. buffer tube. Measure your rifle’s tube before ordering. Available in Black only.

ACS-L BUTTSTOCK KIT - Convenient kit elimi-nates the hassle of buying buttstock mounting parts individually. Kit includes: Magpul buttstock, Mil-Spec aluminum buffer tube, buffer spring, end plate, castle nut, and a recoil buffer. Stocks avail-able in Black, Flat Dark Earth, O.D. Green, or Stealth Gray. #078-000-228AV ACS-L Bttstk Kit, Blk, 8G117A39 � � � � $ 129.99#078-000-229AV ACS-L Bttstk Kit, FDE, 8G117G39 � � � 129.99#078-000-230AV ACS-L Bttstk Kit, ODG, 8G117N39 � � 129.99#078-000-240AV ACS-L Bttstk Kit, Gray, 8G117F39 � � � 129.99

MAGPUL® AR-15/M16

ACS-L™ CARBINE STOCKExtra-Slim Profile For Added

Maneuverability

#100-009-325AV Mil-Spec ACS-L Stk, Blk, 3K68P49 � � � �$ 75.95#100-009-326AV Mil-Spec ACS-L Sck, FDE, 3K68D49 � � � 75.95#100-010-523AV Mil-Spec ACS-L Stk, ODG, 3K68G49 � � 75.95#100-014-420AV Mil-Spec ACS-L Stk, Gray, 3K68E49 � � � 75.95#100-009-327AV Commercial ACS-L Stk, Blk, 3K68L49 � � 75.95

ab

An enhanced version of the Mag-pul CTR® stock, the STR (“Storage/Type Restricted”) buttstock features two 4¼" left- and right-side positioned battery storage tubes and a wider cheekweld for extra comfort. Rubber caps at the rear keep the storage compartments resistant to water incursion, yet pop off easily for access to two AA or two CR-123 batteries inside. Features two integral 1¼" sling loops and a socket for a pushbutton QD sling swivel on each side of the stock. Friction locking mechanism mini-mizes wobble between the buffer tube and the buttstock for a solid, secure “feel”, which is enhanced by the detachable .30" thick rubber buttpad that adds plenty of “grab” to prevent shoulder slippage. abSPECS: Reinforced nylon polymer. 7¼" (18.4cm) OAL, 5¼" (13.3cm) high. LOP adjustment range: 3¼" (8.3cm). 12.5 oz. (354g) wt. Mil-Spec fits mil-spec 1.14" O.D. carbine buffer tubes. Commercial fits larger 1.17" O.D. commercial carbine buffer tubes.

STR BUTTSTOCK KIT - Eliminate the hassle of buying individual buttstock mounting parts with this convenient kit. Kit includes: Magpul buttstock, Mil-Spec alu-minum buffer tube, buffer spring, end plate, castle nut, and a recoil buffer. #078-000-224AV STR Buttstock Kit, Blk, 8G117A39 � � � $ 129.99#078-000-225AV STR Bttstk Kit, FDE, 8G117G39 � � � � � 129.99#078-000-226AV STR Bttstk Kit, ODG, 8G117G39 � � � � 129.99#084-000-399AV STR Bttstk Kit, Gray, 4H117D39 � � � � � 129.99

MAGPUL® AR-15/M16

STR™ BUTTSTOCKAdjustable Carbine Stock With

Internal Battery Storage

#100-009-321AV Mil-Spec STR Buttstock, Black, 3K69A37 � � � � � � � � � � � � � � � � � � � � � � � � � $ 75.95

#100-009-322AV Mil-Spec STR Buttstock, Dark Earth, 3K68A49 � � � � � � � � � � � � � � � � � � � � � � � � � 75.95

#100-010-519AV Mil-Spec STR Buttstock, O.D. Green, 3K68M49 � � � � � � � � � � � � � � � � � � � � � � � � � 75.95

#100-014-418AV Mil-Spec STR Buttstock, Stealth Gray, 3K68C49 � � � � � � � � � � � � � � � � � � � 75.95

#100-009-323AV Commercial STR Buttstock, Black, 3K68M49 � � � � � � � � � � � � � � � � � � � � � � � � � 75.95

Offering the same strength and sta-bility as a fixed stock, this 2.0 version of Magpul's adjustable stock provides a consistent cheekweld in any position,

while offering a unique set of convenience and comfort features to provide a highly versatile, stable shooting platform. The Utility/Battle Rifle (UBR) stock’s tough, reinforced polymer construction can handle high-tempo tactical operations, and is built to handle hard-kicking large-bore (.308/7.62 and up) AR rifles while protect-ing the shooter from the effects of recoil. An integrated, proprietary preset system lets user pull a release lever and instantly snap the stock into one of eight (yes, 8!) different positions. Set your preferred preset position simply by moving a machine screw. The UBR 2.0 mounts on a durable buffer tube (included) to accommodate com-mon M4 carbine buffers and springs, as well as aftermarket A5 buffer systems and even SR-25 rifle buffers. The rubber MOE-SLTM recoil pad offers an anti-slip surface and increases impact protection. Rollover on the toe allows for easier shoulder transitions and better fit when using body armor. A small storage compartment in the stock has a positive-locking door that may be positioned on either side - or remove the compartment entirely for a more skeletonized look. Stock has front and rear QD pushbutton sling receptacles that may be positioned on either side of the stock plus a slot at the toe for a 11/4" sling. abSPECS: Polymer, Black, Field Dark Earth (FDE), O.D. Green and Gray. 8.5" (21.6cm) OAL. 1.7" (4.3cm) wide. 4" (10.2cm) LOP adjustment range. 21.3 oz. (g) wt. w/receiver extension. Includes custom receiver extension tube, buffer spacer, and all mounting hardware. Buffer & recoil spring NOT included.

"TYPE 2" SWIVEL MOUNT - Heavy-duty steel receptacle supplements the two mounts that come with the stock to give your UBR stock maximum versatility in ambidextrous, quick-detach, pushbutton sling mounting. Bolts to any of the stock’s four mounting points and ac-cepts most pushbutton, single-point sling swivels. Allows full 360° rotation of swivel for unrestricted sling travel.SPECS: Steel, phosphate finish, matte black. 3/4" (1.9cm) long. Includes mounting hardware and instructions.#100-005-597AV UBR QD Sling Swivel Mnt, 9Z15G79 � � �$ 18.95

MAGPUL AR15/M4

UBR® 2.0 COLLAPSIBLE STOCKLightweight, Adjustable Stock With

Fixed Stock Comfort & Stability

#100-018-748AV UBR 2.0 Collaps Stk, Blk, 3K177E97 � $ 189.95#100-018-749AV UBR 2.0 Collaps Stk, FDE, 3K180M97 � � 189.95#100-018-763AV UBR 2.0 Collaps Stk, ODG, 3K175G80 � � 189.95#100-018-762AV UBR 2.0 Collaps Stk, Gray, 3K180L97 � � 189.95

Updated edition of the Magpul Precision Rifle Stock lets you benefit from the ergonomic enhance-ments of the PRS system without having to change your rifles receiv-er extension (buffer tube), buffer, or buffer spring. Fits rifle-length receiver extensions, as well as mil-spec and A5-length carbine re-ceiver extensions. Positive-locking detent wheels enable precision adjustments for both length-of-pull and comb height. The thick rubber recoil pad is built to stand up to the recoil of a .50 BMG and can be adjusted vertically or canted 5° to either side. Two limited-rotation QD sling swivel sockets and a simple thread-through sling loop that can be placed on either side to match your carrying pref-erence. Underside has M-LOK slots for mounting a monopod. abSPECS: Polymer, Black, Field Dark Earth (FDE), O.D. Green (ODG), and Stealth Gray. 11.5" (29.2cm) OAL. 1.4" (3.5cm) LOP adjustment. 0.8" (2cm) cheek height adjustment. 25 oz. (708.7g) wt.

MAGPUL AR-15/M16/AR-STYLE .308

PRS® GEN3 PRECISION-ADJUSTABLE STOCK

Gives Your Rifle The Full PRS Feature Set Without Changing

Buffer Tubes

#100-018-765AV PRS GEN3 Stock, Black, 3K216N87 � � $ 242.20#100-018-766AV PRS GEN3 Stock, FDE, 3K222L87 � � � 242.20#100-018-768AV PRS GEN3 Stock, ODG, 3K214C36 � � 242.20#100-018-767AV PRS GEN3 Stock, Gray, 3K222F87 � � � 242.20

Maxim aimed to create a tactical stock built for hard real-world use that's also comfortable and easy to use. We think they nailed that goal and then some. No buttons or levers or manual locking sequences - just pull to deploy. Fully extended, it gives you a stan-dard M4 stock's LOP, with 3 other in-between positions. Retracted, it adds less than 5.5" to your rifle's OAL. Wide top surface gives a solid, comfortable cheekweld. Comes with a standard carbine buffer and spring. Fits mil-spec (1.14" O.D.) buffer tube. ab

#100-020-892AV CQB Stock Standard Buffer & Spring Black, 4E00JIL � � � � � � � � � � � � � � � � � � � � �$ 332.45

MAXIM DEFENSE INDUSTRIES AR-15/M16

CQB STOCKMinimal Profile Stock With Built-In Buffer System - It's

Comfortable, Too

Designed for the Maxim Defense CQB Stock, the Silent Captured Springs are Maxim exclusives made by JP Rifles. By eliminating the friction found in standard buffer setups, the JP Silent Captured Spring also allows for smoother action resulting in less sound as the bolt cycles. Available in a Stan-

dard weight, a Heavy weight for select-fire rifles, and version spe-cifically for your "AR-9" - an AR-15 chambered for 9mm Luger. ab

MAXIM DEFENSE INDUSTRIES

JP SILENT CAPTURED SPRING FOR MAXIM CQB STOCK

Cushions Felt Recoil, Helps Gun Run Quieter - Made for Maxim Exclusively By JP Rifles

#100-020-895AV Standard JPSCSS for Maxim Stock, 4E135A72 � � � � � � � � � � � � � � � � � � � � � � � � � $ 139.95

#100-020-896AV Heavy JPSCSS for Maxim Stock, 4E157P15 � � � � � � � � � � � � � � � � � � � � � � � � � 164.95

#100-020-897AV 9mm JPSCSS for Maxim Stock, 4E178P58� � � � � � � � � � � � � � � � � � � � � � � � � 189.95

A full stock, with the same length as a collapsed M4, CAR stock; quick to shoulder, fast

handling and maneuverable in confined or restricted areas. Pro-vides a consistent and comfortable cheek weld for greater control and accuracy. Compact dimensions reduce overall length to 32" when used with a 16" barrel. Furnished with carbine-length buffer, tube and recoil spring. abSPECS: Fiberglass/kevlar, black, matte finish. 7" (17.8cm) long.


LE ENTRY TACTICAL STOCKCompact Length Improves Handling In Confined Areas

#739-000-009AV LE Entry Tactical Stock, 9C69K99 � � � $ 69.99

SB Tactical's SBPDW Ad-justable Pistol Stabilizing Brace adds a new dimension to "The Brace" - three-position length adjust-ment. Just like the original Brace, the SBPDW can be strapped com-fortably around your forearm to give you better control of your AR-15 pistol so you can shoot it more accurately one-handed. (Helps prevent fatigue during long range sessions, too.) Nylon strap adjusts easily for a comfortable, custom fit to your arm. Also like the original, the SBPDW can shouldered like a traditional stock for a third point of contact to stabilize the pistol when taking fast shots. And the adjust-able length lets you set up a fit that's just right for you. Further adding to the SBPDW's convenience is the built-in pistol buffer tube - no additional replacement tube to purchase - that is compatible with an M4-carbine type buffer and standard mil-spec AR-15 bolt/carrier group. Put an SBPDW on your AR-15 pistol today to get maximum enjoyment from shooting your compact "pocket AR." ab

SB TACTICAL AR-15

SBPDW PISTOL BRACEHelps You Control Your AR Pistol Just Like the Original "Brace"; Adjustable Length

To Fit Different Shooters

#100-024-264AV SB PDW Adj. Pistol Stabilizing Brace, Black, 5Z217I27 � � � � � � � � � � � � � � � � � � � $ 239.99

#100-024-265AV SB PDW Adj. Pistol Stabilizing Brace, FDE, 5Z231D75 � � � � � � � � � � � � � � � � � � � 255.99

The SB Tactical's SBA3 extends the freedom to install "The Brace" on any AR-15 pattern firearm with a mil-spec (1.14" O.D.) M4 carbine receiver exten-sion (buffer tube). The opens up the Brace's utility for compact carbines and

SBRs, as well as AR pistols. The SBA3 also adds even greater length-of-pull adjustability than the current SBPDW with five positions for the perfect fit - and it still offers all the enhanced weapon support from the forearm of the original pistol Brace. Further enhancing the SBA3's versatility is a handy ambidextrous QD sling swivel socket, and of course the nylon forearm strap is nicely adjustable. Compact, too - the entire SBA3 is only 6.1" long and weighs slightly under 7 oz. Even better, a mil-spec carbine receiver extension is included for the benefit of shooters who have a rifle fitted with the incompatible, larger diameter "Commercial"-sized tube. Does not include the lock nut, end plate, carbine-weight recoil buffer, or buffer spring. Those components must be purchased separately. ab

SB TACTICAL AR-15

SBA3 STABILIZING BRACE5 Positions for Maximum Versatility

#100-027-153AV SBA3 AR-15 Pistol Brace, Black, 5Z116E60 � � � � � � � � � � � � � � � � � � � � � � � � � $ 129.99

#100-027-154AV SBA3 AR-15 Pistol Brace, FDE, 5Z116Q60 � � � � � � � � � � � � � � � � � � � � � � � � 129.99

STO

CK

S

AR

-15/M

16


brownells.com

Upgraded variant of SB's original "Brace" that started the brace revolu-tion for AR-15 (and other) pistols. Gives the shooter extra support when shoot-ing an AR pistol by strapping to the forearm, resting on the cheek, or shouldering like a traditional stock. Fits AR-15 pistol buffer and offers a thin, minimalist profile while still providing plenty of sup-port. The SBM4 Pistol Stabilizing Brace® is the evolution of the original SB15™. It's thinner and lighter thant the original SB15 brace, with enhanced cheekweld ergonomics for improved stability, en-hance accuracy potential, and an overall more comfortable shoot-ing experience. The SBM4 has been redesigned to be thinner and lighter than the original SB15 with better ergonomics, with a more comfortable cheekweld and a more balanced feel shooter - with-out sacrificing strength and durability. The SB Tactical SBM4 AR-15 Pistol Stabilizing Brace is the best of a proven design that delivers the ultimate in comfort and stability. ab

SB TACTICAL AR-15

SBM4 PISTOL STABILIZING BRACE"The Brace" Redesigned & Upgraded

- Enhances Control & Accuracy of Your AR Pistol

#100-023-438AV SBM4 Stabilizing Brace, Black, 5Z89D14 � � � � � � � � � � � � � � � � � � � � � � � � � �$ 119.99

#100-023-439AV SBM4 Stabilizing Brace, FDE, 5Z89C14 � � � � � � � � � � � � � � � � � � � � � � � � � � 119.99

Easy-to-install kit con-tains everything you need to

convert a fixed-stock AR-15 rifle to a GI-style collapsible carbine stock system, or use to complete a custom-built carbine. Lets you easily adjust length of pull for different-stature shooters and clothing/armor configurations. Kit includes 1.17" O.D. commercial receiver extension tube with six, positive-locking notches for the T6 buttstock of tough, durable fiberglass-reinforced molded poly-mer. Also includes steel receiver lock plate, steel lock nut, polymer sling loop, carbine recoil spring, and carbine buffer. Requires no permanent alterations to rifle. Installation instructions included. abSPECS: Aluminum and reinforced injection-molded polymer, Black or Dark Earth. 8" (20.3cm) OAL collapsed; 113/4" (29.9cm) OAL fully extended.

TAPCO AR-15/M16 T6 COLLAPSIBLE STOCK CONVERSION KIT

Convert Your Rifle To A Six-Position Carbine Stock

#100-004-296AV T6 Collaps Stk Kit, Blk, 5A61N63 � � � � � $ 68.99#100-004-548AV T6 Collaps Stk Kit, FDE, 5A60M76 � � � 67.99

Troy's PDW retractable stock reduces your AR-15 carbine's overall length by 3", making it a fast-handling, nim-ble, Personal Defense Weapon (PDW). The stock requires a proprietary bolt/carrier group with inte-gral recoil buffer, buffer spring, and heavy-duty latch assembly - ALL of which are included in the kit. Depress the lever on the underside of the stock with your thumb to select one of 6 adjustment positions in one fluid motion - even when you're wearing gloves. Machined-in texture on the buttplate helps keep the stock firmly in the shoulder pocket, even if you're wearing a tactical vest or plate carrier. Inte-gral sling mounts. Compatible with rifles chambered in .300 AAC Blackout and full-auto rifles. Will not work with gas-piston guns. ab

Fast-Deploy Adjustable Stock Makes Standard

Carbine 3" Shorter

#100-017-474AV PDW Stock Kit, 3B426L38 � � � � � � � � � $ 454.99


PDW STOCK KIT

“Clubfoot”-style ad-justable stock with modu-lar storage options gives the tactical shooter excep-tional versatility and weapon control. The EMOD is 1½" longer than the original Modstock to ensure a solid, comfortable cheekweld even on rifles with long eye relief scopes. Two, detachable, full-length storage compartments provide additional cheek support for more comfort and stability. Each waterproof compartment holds up to 3 AA or 4 CR123 batteries, and a permanent flip-open com-partment on the left side of the stock holds two more AA batteries or other small items. Extra-length buttplate with removable rubber pad angles forward from heel to toe for a better hold in the “ready” position and when the weapon is held above the shoulder pocket in the heads-up position. Two, molded-in sling loops accept military-style, nylon web slings; molded-in sling socket accepts a quick-detach, push-button swivel for ambidextrous single-point sling attachment. Basic EMOD Kit includes buttstock and detachable storage compartments only, available for Mil-Spec and Commer-cial buffer tubes. Mil-Spec Combo Kit contains all parts needed to replace an existing A1 or A2 stock, including a five-position, mil-spec buffer tube with white index numbers visible through a witness hole in the top of the stock. abSPECS: Molded polymer, black. 73/4" (19.7cm) long. Basic EMOD Kit in-cludes buttstock and two (2) detachable storage compartments. Mil-Spec fits 1.14" O.D. carbine buffer tubes only. Commercial fits larger, 1.17" O.D. commercial buffer tubes. Mil-Spec Combo Kit includes stock, storage compartments, mil-spec buffer tube, buffer spring, endplate, and locking nut. L.O.P adjusts from 111/2" (29.2cm) to 143/4" (37.5cm).

VLTOR AR-15/M16

ENHANCED MODSTOCKPrecise Weapon

Control In All Tactical Situations; Comes With Customizable Storage

Options

#100-003-222AV Commercial EMOD Basic Kit, Black, 3A107C82 � � � � � � � � � � � � � � � � � � � � � � � � �$ 114.95

#100-003-186AV Mil-Spec EMOD Basic Kit, Black, 3A107I82 � � � � � � � � � � � � � � � � � � � � � � � � � � 114.95

#100-003-187AV Mil-Spec EMOD Combo Kit, Black, 3A168L77 � � � � � � � � � � � � � � � � � � � � � � � � � � 179.95

Tactical stock system contains all the parts you need to replace an existing

carbine or rifle stock with a highly versatile, five-position, carbine stock. The IMOD buttstock’s unique, “clubfoot” shape provides bet-ter overall control and firm, stable shoulder contact in combat situ-ations. Removable, non-slip rubber buttpad angles slightly forward from heel to toe for a better hold in the “ready” stance and when the weapon is held above the shoulder pocket in the heads-up position. Snag-free design won’t hangup on clothing, web gear, or equip-ment. Two detachable storage compartments with waterproof caps hold up to four AA or six, CR-123 spare batteries. Two sling loops are wide enough for military-style, nylon web slings, plus there’s a socket for a quick-detach, pushbutton sling swivel on each side of the stock. abSPECS: Molded polymer, black. 7" (17.8cm) to 95/8" (24.5cm) l.o.p. Kit con-tains stock, mil-spec 1.15" O.D. receiver extension, carbine buffer, buffer spring, endplate, locking Nut, and two detachable storage compartments with caps.

VLTOR AR-15/M16

IMPROVED MODSTOCK COMBO KITGives You Better Control

& More Options In Tactical Situations

#100-005-448AV IMOD Combo Kit, Blk, 3A135E95 � � � $ 144.95

Specifically de-signed at the request of the U.S. Marine Corps, the EMOD A5 stock system en-hances both operator

comfort and the reliability of the rifle. With seven length-of-pull ad-justment positions at .65" increments, the A5 system can offer a longer length of pull than an M16A2 fixed stock, yet collapses to the same length as an M4 carbine. The buttstock itself offers all the advantages of the EMOD’s “clubfoot” shape and detachable rubber recoil pad for an extra-secure shoulder fit. Using a standard M16A2 action spring and the specially-designed buffer, the EMOD A5 system offers the trustworthiness of a fixed-stock rifle, while reducing felt recoil and rate of fire for improved weapon control. Two full-length detachable storage compartments with waterproof caps are capable of housing 3 AA or 4 CR-123 batteries; lower, weatherproof storage compartment holds 2 AA batteries or miscellaneous small parts. Two molded-in sling loops accept military-style, nylon web slings. Receptacles on both sides of stock to accept a pushbutton QD swivel for single-point slings. Combo Kit includes all the necessary components for upgrading a mil-spec AR-15/M16/M4 lower receiver. A5 Receiver Extension and A5 Spring/Buffer kit are sold separately to enable upgrading an existing carbine to the longer, 7-position extension for use with other mil-spec M4-type buttstocks. abSPECS: Molded polymer, black. 81/2" (21.6cm) OAL collapsed; 121/2" (31.8cm) OAL. fully extended. 26.7 oz. (756.9g) total wt. Includes action spring, A5 buffer, receiver end lock plate, and receiver end lock nut. Com-patible with gas piston systems. A5 Receiver Extension accepts M4-type buttstocks that fit mil-spec 1.15" O.D. receiver extension. A5 Spring/Buffer kit must be used only in the Vltor A5 receiver extension; attempting to use these parts in a standard M4 receiver extension will result in damage to the rifle. Not compatible with AR-Style .308 platforms.

#100-009-399AV EMOD A5 Combo Kit, 3A201A60 � � � $ 214.95#100-010-798AV A5 Spring/Buffer Kit, 3A55L36 � � � � � � 56.95#100-010-797AV A5 Receiver Extension, 3A46F85 � � � 49.95

Seven-Position Adjustable Stock System Enhances

Comfort, Control & Weapon Reliability

VLTOR AR-15/M16

EMOD A5 COMBO KIT

XLR Industries AR buttstock is designed specifically for AR-15 and AR-308 rifles and is the perfect upgrade for the tactical or 3-Gun competition shooter. It features QD flush cups on the left and right sides, monopod provi-sion, and an enclosed design. Our AR stock has a shorter cheek rest for more LOP adjustments with the charging handle. This buttstock includes a dual recoil plate system for ultimate adjustability. The user can set up as a single plate if desired for a small weight savings. The buffer tube and castle nut are included. Please note that a carbine length (7” internal length) buffer and buffer spring are required when used on AR applications. Other versions of this stock are available specifically for bolt action rifle chassis systems that use an AR-15 receiver extension for stock mounting - see the Stocks & Chassis subsection of the Rifles section. ab

XLR INDUSTRIES AR-15

TACTICAL AR BUTTSTOCK

Adjustability Up the Wazoo for Perfect Shooter-to-Rifle

Integration

#100-024-783AV Tactical AR Stock Assembly, 9Z225P00 � � � � � � � � � � � � � � � � � � � � � � � � $ 225.00

Mil-spec receiver extension tube has the correct 1.148" out-side diameter to ensure proper fit of adjustable mil-spec carbine stock. Allows you to install a mil-spec stock on a commercial car-bine, convert a rifle with a fixed A2 style stock to an adjustable M4 stock, or complete a custom build. Six machined notches on the underside prevent the stock locking pin from slipping, yet still of-fer outstanding ease and flexibility in setting the buttstock length. Precision machined from strong, lightweight 7075 aluminum, then hardcoat anodized with a hard, wear-resistant matte black finish. abSPECS: 7075 T6 aluminum, hardcoat anodized, matte black. 7¼" (18.4cm) O.A.L, 1.148" (2.9cm) O.D. Fits mil-spec AR15/M16 lower receivers. Rifle conversion requires a carbine spring and buffer, available separately.

AR15/M16/M4

MIL-SPEC RECEIVER EXTENSION TUBERugged, Six Position Tube

For M4 Type Stocks

#080-001-046AV Mil-Spec Rec'r Ext. Tube, 4Z24H19 � � $ 25.99

Our AR-15 Pistol Buffer Tube Assembly is the correct length and has the right spring tension and buffer weight to operate reliably in your next AR pistol build. Assembly includes buffer tube, castle nut, endplate, spring, and carbine buffer. SPECS: 6061 T6 extruded aluminum, matte black hardcoat anodized fin-ish. Included 3 oz. buffer.

AR-15/M16

PISTOL BUFFER TUBEComplete Kit, Correct Specs

for AR Pistol Use

#080-001-331AV AR-15 Pistol Buffer Tube Assembly 6061-T6 Black, 5A43N99 � � � � � � � � � � � $ 49.99

M4-style receiver extension lets you convert a commercial car-bine or A2-style fixed-stock rifle to accept an adjustable buttstock that fits a "mil-spec" 1.146" O.D. tube. This tube has six precision machined notches to securely grasp the buttstock locking pin for fast positioning. abSPECS: Machined 7075 T6 aluminum, hardcoat anodized, matte black. 71/4" (18.2cm) long, 1.146" (2.9cm) O.D.

BRAVO COMPANY AR-15/M16/M4

MIL-SPEC RECEIVER EXTENSION For M4-Style Buttstocks

That Require A "Mil-Spec" Diameter Tube

#100-016-336AV Mil-Spec Rec'r Extension, 1E37I63 � � � �$ 38.99

Machined aluminum receiver extension tubes accept M4-style adjustable carbine buttstocks. Six precision-machined notches on the underside provide plenty of options for setting length-of-pull. Perfect for a custom build, or updating a fixed stock rifle with an ad-justable M4 stock. Machined from a lightweight aluminum extrusion then hardcoat anodized for extra strength, and dry film lube-coated inside for smooth movement of the buffer and buffer spring. Re-quires carbine recoil spring and buffer, lock ring, and receiver plate, all available separately. abSPECS: Aluminum, hardcoat anodized, matte black. 77/8" (20cm) long. Mil-Spec - 1.145" O.D. Universal - 1.168" O.D.

DOUBLESTAR CAR-15/M4

RECEIVER EXTENSIONFor M4-Style

Buttstocks; Gives 6-Position Adjustment

#100-004-978AV Mil-Spec Rec'r Extension, 2Z25J37 � � �$ 28.99#100-010-683AV Universal Rec'r Extension, 2Z24Q31 � � 27.99

STO

CK

S

AR

-15

/M16


SINCE 1939

STO

CK

S

M4-style receiver extension tube has six precision-machined notches on the underside for maximum flexibility in setting length-of-pull with adjustable buttstocks. Lets you install a mil-spec stock on a civilian carbine or refit a rifle with an A2-style fixed buttstock with an adjustable M4 stock. Outside diameter of tube is machined approximately .003" oversized for snug, rattle-free fit of stocks de-signed for mil-spec extensions. Lightly sand interior of stock to get just the right combination of snugness and freedom over move-ment. Machined from a lightweight aluminum extrusion before hardcoat anodizing with a wear-resistant matte black finish. Rifle conversion also requires a carbine action spring and buffer, avail-able separately. abSPECS: Aluminum, hardcoat anodized, matte black. 71/4" (18.2cm) long, 1.149" O.D.

D.S. ARMS CAR-15/M4

RECEIVER EXTENSIONProvides

Six-Position Adjustment

#274-000-018AV Receiver Extension Tube, 4G16F69 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 22.99

Receiver extension tube has the correct, 1.146" outside diameter for mounting collapsible buttstocks designed for the smaller, mil-spec tube. Lets you mount a mil-spec stock on a civilian carbine or convert a rifle with A2-style fixed buttstock to collapsible configu-ration; carbine action spring and buffer assembly required. Allows fast, easy repeatability of buttstock position with five notches on underside to accept the stock’s locking pin and corresponding white position numbers on top visible through the witness hole on many stocks. Precision machined from aluminum bar stock for consistent dimensions that ensure smooth, snag-free sliding of buttstock. abSPECS: Aluminum, hardcoat anodized, matte black. 7- 3/16" (18.7cm) long, 1.146" O.D.

VLTOR CAR-15/M4

MIL-SPEC RECEIVER EXTENSIONCorrect Size For Rattle-

Free Mounting Of Mil-Spec Collapsible

Buttstocks

#100-003-750AV CAR-15/M4 Mil-Spec Receiver Extension, 3A44K04� � � � � � � � � � � � � � � � $ 46.95

Designed for M4-style, ad-justable carbine stocks, this inno-vative receiver extension tube has integrated "fingers" that extend into the receiver and support the carrier, even when the bolt is fully forward. By cradling the carrier, it eliminates premature wear on the buffer tube caused by carrier-tilt. Machined from aircraft grade alu-minum, this six position tube comes with three drainage holes, ideal for wet or marine environments. Buffer detent doubles as a lock to prevent the tube from rotating or coming loose under extreme operating conditions. abSPECS: 7075 T6 aircraft aluminum, hardcoat anodized, matte black. 7.4" (18.7cm) OAL. 1.14" (2.9cm) O.D.

PATRIOT ORDNANCE FACTORY AR-15/M16

ANTI-TILT BUFFER TUBEPrevents Carrier-Tilt & Wear

Of Buffer Tube

#100-014-172AV Enhanced Anti-Tilt Buffer Tube, 7D48M56 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 49.99

PWS's updated mounting system enables you to install a commercial OR mil-spec re-

ceiver extension ("buffer tube") quickly and easily without having to stake the castle to the end plate. The underside of the nut has serrations that engage a pin on the end plate. Get the tube correctly oriented, tighten the castle nut down using a standard stock wrench (not included - you'll have to provide your own), and it locks securely in place. It's easy to remove if you ever want to change the buffer tube. End plate has an integral socket for a QD pushbutton sling swivel. Steel construction with a matte black finish. Fits M4-type car-bine receiver extensions and standard mil-spec lower receiver. ab

PRIMARY WEAPON SYSTEMS AR-15/M16

RATCHET LOCK CASTLE NUT & END PLATE

Eases Installation of Buffer Tube - Eliminates Staking of Castle Nut

#100-031-925AV Ratchet Lock Castle Nut/End Plate, 4B24K71 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 25.99

V Seven's castle nuts are precision machined from lightweight alloys that won't add unnecessary weight to your rifle. They are more than strong enough to keep the receiver extension and lower receiver closely related to each other. They are sized to fit standard mil-spec extensions and lowers. These nuts have the hole drilled in the side that allows you to tighten them with the single-point hook wrench found on most AR-15 multi-tools. Lightweight model is made from a special aluminum alloy that is 30% stronger and harder than 7075 T6 and 62% lighter (only 6.7 grams) than a standard steel castle nut. Type III hardcoat anodized for extra surface strength. Torque to 25 ft lbs. Titanium models made from Grade 5 Titanium, with your choice of an IonBond black finish or left raw, natural silver-gray. Weights 9.7 grams. ab


RECEIVER EXTENSION CASTLE NUTS

Strong Yet Lightweight Alloys Won't Weigh Down Your Rifle

#100-500-040AV Lightweight Castle Nut, 7G21N34 � � � �$ 21.34#100-500-016AV Titanium Castle Nut, Blk, 7G33A95� � � � 33.95#100-500-015AV Ti Castle Nut, Silver, 7G00MQG � � � � � � � 29.10

Law Tactical’s adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in “non-

permissive” environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and any stock that fits them. Compat-ible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen 3 has hinge positioned lower than earlier generations to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier exten-sion (no tools to install/remove) and buffer retainer and spring. abSPECS: Machined 4140 steel, matte black DLC finish. Adds 1.3" (3.4cm) to length of pull. 8.5 oz. (241g) wt. Do not fire rifle with stock folded.

LAW TACTICAL AR-15/M16

GEN 3 FOLDING STOCK ADAPTERPut A Folding Stock On Any

AR-Pattern Rifle!

#100-015-850AV Folding Stk Adapter, Blk, 1D257G55 � � $ 269.99#100-022-522AV Folding Stk Adapter, FDE, 1D249A99 � � 275.99

This adapter enables installa-tion of a Picatinny-attachable fold-

ing buttstock on an AR-15 lower receiver in place of the standard receiver extension (“buffer tube”). Some AR-pattern firearms do not employ the stan-dard recoil buffer system, including the old Armalite AR-180, carbines and pistols with new Brownells BRN-180™ upper receiver, and the SIG MCX. Also, an increasing number of other rifles (such as bolt action “chassis” rifles) are fitted with an AR-15 buf-

fer tube to allow shooters to take advantage of the multitude AR stock options now available - but they do not need the buffer tube to function. ALL of these guns are candidates for the KNS AR/MCX Adapter Kit, which will let you install an MCX-type FOLDING stock, submachinegun stock, or similar stock on them. The adapter plug screws into the lower receiver in place of the buffer tube, and then the rail section attaches to the plug secured by the included hex-head bolt and lock washer. Attach your folding stock (or brace for AR pistols) and you are ready to hit the range with an extremely compact, maneuverable, versatile firearm! Machined aluminum construction with matte black hardcoat anodized finish; steel bolt and washer. Two models: With Flange – rail body has a flange that fits in the recess of the lower receiver to retain the takedown pin’s spring and plunger. Without Flange – fits lower receiver with a takedown pin that DOES NOT require the use of a spring and detent. Brownells Gun Tech™ Note: This product will work only on AR-type firearms where the carrier and buffer tube DO NOT protrude past the receiver ring while cycling. ab

Easy Way To Install a Folding Stock on ARs That Do Not Have the

Traditional Recoil Buffer System

#923-000-071AV AR/MCX Stock Adpater With Flange, 3B59N99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 59.99

#923-000-070AV AR/MCX Stock Adpater WithOUT Flange, 3B00ABI � � � � � � � � � � � � � � � � � � � � 59.99


AR/MCX STOCK ADAPTERLower receiver not included

Adapter installed

Synthetic rubber recoil pad slips over the hard plastic buttplate on an M4-type adjustable carbine stock for se-cure, non-slip shouldering and as much as 70% reduction in felt recoil. Made from proprietary NAVCOM™ shock-absorbing material that won’t crack, split, or take a “set.” Spreads recoil over a larger area and prevents the stock from digging into your shoulder during long periods in the ready position. Improves weapon control and reduces muzzle jump to aid in fast, accurate follow-up shots. Secure snap-on design for quick installation and removal. abSPECS: NAVCOM synthetic material, black. 51/4" (13.3cm) high, 2" (5.1cm) wide. Fits M4-type adjustable carbine stocks with buttplate up to 53/16" (13.2cm) high x 17/8" (4.8cm) wide.

SIMS VIBRATION LABORATORY AR-15/M16

LIMSAVER® CARBINE RECOIL PADReduces Felt Recoil & Improves Weapon Control

#100-005-457AV Limbsaver Recoil Pad, 7K34N44 � � � � � � $ 37.99

Provides added cheek support for in-creased comfort and shooting accuracy to AR-type rifles equipped with M4-style collapsible stocks. Plus, gives an advanced tactical appearance similar to the SOPMOD stock. Made from a very lightweight, fiberglass reinforced plastic that’s as strong as it is functional. Waterproof, sealed com-partments on each side will hold four “AA” or six CR123 cell batteries. No gunsmithing required for installation; saddle locks onto stock with accessory sling loop hardware that’s provided. abSPECS: Injection molded plastic, black, matte finish, 53/4" (14.5cm) long, 23/4" (6.9cm) wide. Fits M4-style stocks only.

COMMAND ARMS CAR-15/M4

COLLAPSIBLE STOCK SADDLELightweight Cheek Support Plus

Convenient Battery Storage

#100-002-567AV Std M4 Stock Saddle, 6C15A95 � � � � � � $ 16.99

Billet aluminum spacer slips into a rifle-length receiver extension to let you install and use a carbine-length spring and buffer. Use in an A1, A2, or Magpul PRS receiver exten-sion, along with a carbine-length spring and a Spike’s Tactical ST-T2 or ST-T3 buffer to reduce the cycle rate in a full-auto weapon for improved control and better handling. Tough, hardcoat anodized coating increases surface strength and wear resistance. abSPECS: Aluminum, hardcoat anodized, matte black. .986" (2.5cm) diam-eter, 2.77" (7cm) long, 3.3 oz. (93.5g) wt.

Use Carbine Buffer & Spring In A1/A2 Receiver Tubes

#100-008-582AV Rifle Stock Buffer Spacer, 3B22G52 � � �$ 25.99


RIFLE STOCK BUFFER SPACER

No permanent alterations necessary to your M4 or Tap-co T6 collapsible stock to add increased shooting comfort, lower felt recoil, plus an additional 1/2" to the length-of-pull. Rubber pad slips easily over the plastic buttplate; held in posi-tion by rubber tabs and a friction collar. Won’t shoot loose, stays put until it’s removed. Great accessory for competitive

shooters; raised, non-slip surface helps keep your rifle or shotgun on-shoulder during long shooting strings or moving courses of fire. abSPECS: Rubber, black. Adds 1/2" (12.7mm) to length-of-pull. Fits current M4 collapsible stock designs and Tapco T6 stocks.

TAPCO CAR-15/M4 T6/M4 RECOIL PADIncrease Shooting Comfort & Length-Of-Pull

#100-002-500AV Tapco M4/T6 Recoil Pad, 5A9E72 � � � � �$ 10.19

Replacement recoil pads give you enhanced shoulder purchase and recoil control with your Magpul CTR®, MOE®, UBR®, or ACS™ stock. Non-

slip rubber surface holds firmly to your clothing when it counts in tac-tical operations or competition for improved target acquisition and reduced felt recoil. Extended is the original factory pad for Commer-cial CTR and MOE stocks. May also be mounted on ACS, UBR, and Mil-Spec CTR/MOE stocks to increase length of pull by 1/4". Enhanced model’s thicker, vented, shock-absorbing construction helps reduce felt recoil for better weapon control and faster follow-up shots. Fits ACS, UBR, and Mil-Spec CTR/MOE. Will also fit CTR/MOE stocks mounted on commercial buffer tubes shorter than 71/4". abSPECS: Rubber exterior over hard molded polymer core, black. Extended – .55" thick (14mm); Enhanced – .70" (17mm) thick.

MAGPUL AR-15/M16

TACTICAL RECOIL PADSEnhances Shoulder Purchase For Comfort &

Better Weapon Control

#100-004-167AV Extended Recoil Pad, 9Z15Q79 � � � � � � �$ 18.95#100-004-168AV Enhanced Recoil Pad, 9Z15C79 � � � � � � 18.95

Extended Enhanced

Pre-formed lead ingot increases rear weight to balance out muzzle-heavy, match AR-15’s for best accuracy. Denser than loose, lead shot; conveniently drops into the A-2 buttstock and is retained by the trap door. Can be cut, drilled or trimmed to achieve perfect balance. abSPECS: Lead. 8" (20cm) long, 3 lb. 11 oz. (1.7 kg) wt.

Balances The Rifle For Consistent Accuracy

#776-015-001AV AR-15 A-2 Buttstock Weight, 6G33K39 � � � � � � � � � � � � � � � � � � � � � � � � $ 36.99

AR-15/M16

BUTTSTOCK WEIGHT

Orders: 800-741-0015

Machined from aircraft grade aluminum, this lightweight modular handguard allows M-LOK ac-cessories to be mounted along the entire length of the rail at the 2, 4, 6, 8, and 10 o’clock positions. A short section of Picatinny rail is machined on top of the handguard for mounting front sights, lasers, or other optics. Free floating handguard attaches to the included barrel nut with six screws for a solid, secure fit. The 1.4" inner diameter offers plenty of clearance for even large suppres-sors. Handguard has two, integrated, anti-rotational QD slots lo-cated at the 2 and 10 o’clock positions at the base of the rail for sling attachments. Installation requires proprietary Barrel Nut Wrench, sold separately below (but you only have to buy it once!). abSPECS: 6061 T-6 aluminum, hardcoat anodized, matte black. 1.7" (4.3cm) O.D. Barrel nut- 7075-T6, hardcoat anodized. Includes shim kit and in-structions. Fits Mil-Spec AR-15 and M4 carbines.

ALG DEFENSE AR-15/M16

ERGONOMIC MODULAR RAIL V2Rounded Handguard Won’t Bite Into Your

Hand

#100-017-374AV 10" EMR V2, 8Z145H00 � � � � � � � � � � � � $ 145.00#100-017-376AV 13" EMR V2, 8Z155Q00 � � � � � � � � � � � � 155.00#100-017-377AV 15" EMR V2, 8Z165E00 � � � � � � � � � � � � 165.00#100-022-970AV ALG Modular Rail Barrel Nut

Wrench, 8Z5C00 � � � � � � � � � � � � � � � � � 5.00

Machined aluminum handguard free-floats the barrel for bet-ter accuracy potential while it provides plenty of KeyMod slots for add-on rail segments and accessories. Built-in Picatinny top rail is supplemented by KeyMod slots at - and between - the 3, 6 and 9 o'clock positions. The KMR Alpha flares slightly at the front into a special, flat-bottomed shape that's comfortable to hold, and pro-vides stable support when shooting off barricade or obstacle. Fits standard AR-15 upper receiver. Comes with one KeyMod rail seg-ment, proprietary barrel nut, and mounting hardware. ab


KMR ALPHA HANDGUARDFree-Floats Barrel & Covered

With KeyModTM Slots For Easy, Fast Accessory

Mounting

#100-018-327AV KMR Alpha, 7", 1E162P89 � � � � � � � � � � $ 171.95#100-018-330AV KMR Alpha, 8", 1E162H89 � � � � � � � � � � 171.95#100-018-331AV KMR Alpha, 9", 1E169A28 � � � � � � � � � � 176.95#100-018-332AV KMR Alpha, 10", 1E170L47 � � � � � � � � � 179.95#100-018-333AV KMR Alpha, 13", 1E179H93 � � � � � � � � � 189.95#100-018-334AV KMR Alpha, 15", 1E189J42 � � � � � � � � � 199.95

The sleek, ALG EMR V0-E hand-guard lets you attach accessory rails at the muzzle end of the rail in the 45° intervals, including the standard 12, 3, 6 and 9 o’clock positions. Machined-in flat sections of the rail allow the shooter to maintain a comfortable grip. The ALG EMR V0-E includes two inte-grated anti-rotational QD sling swivel holes at the 2 and 10 o’clock position on the base of the rail. Machined from 6061-T6 aluminum. 2" proprietary 7075-T6 aluminum barrel nut. Does not include ac-cessory rails. Combining modern design with affordability, the ALG EMR VO-E is your go to upgrade for any AR-15 build. ab

ALG DEFENSE AR-15/M16

ERGONOMIC MODULAR RAIL V.0Economical & Robust Free-Float

Handguard

#100-023-642AV 10" ALG V.0 Handguard, 8Z80A00 � � � $ 80.00#100-023-643AV 13" ALG V.0 Handguard, 8Z85E00 � � � 85.00#100-023-644AV 15" ALG V.0 Handguard, 8Z00BFN � � � 111.99

AR

-15/M

16H

AN

DG

UA

RD

S

Bravo Company’s BCM MCMR "M-LOK® Compatible Modular Rail Handguard" gives you a full-length top-side Picatinny and seven rows of M-LOK slots to ensure you have vast expanse of room for mounting accessories. Engineered to minimize bulk, the MCMR is essentially Bravo Company’s popular KMR handguard adapted for the M-LOK accessory mounting system originally developed by Magpul. The MCMR gives you a stream-lined, clean-looking rifle that is also easy to grasp and maneuver, and it free-floats your barrel, so the weight of the handguard and attached accessories won’t compromise the gun’s accuracy. Engi-neered for exceptional cross-sectional strength. Top Picatinny rail is T-marked. INCLUDES proprietary steel barrel nut (same one used on BCM KMR, MCMR and QRF handguards) and installation instruc-


MCMR HANDGUARDFree-Float Aluminum Handguard Ready for M-LOK® Accessories

#100-026-759AV MCMR M-LOK HG 7", 1E159K68 � � � � � $ 171.95#100-026-760AV MCMR M-LOK HG 8", 1E159E68 � � � � 171.95#100-026-761AV MCMR M-LOK HG 9", 1E169K37 � � � � � 176.95#100-026-762AV MCMR M-LOK HG 10", 1E167C10 � � � 179.95#100-026-763AV MCMR M-LOK HG 13", 1E181L81 � � � � 189.95#100-026-764AV MCMR M-LOK HG 15", 1E191K38 � � � � 199.95

tions. The MCMR is fully dehorned so there are no sharp edges to bite into your hand or snag on your gear. It’s machined from 6061 T6 aluminum for the optimum balance of strength vs. weight, then given a hardcoat anodized finish for extra surface strength and cor-rosion resistance (yes, aluminum will corrode - look at an older car with factory alloy wheels!). ab

Constructed of braid-ed carbon fiber, these ultra-lightweight hand-guards employ a "fishnet" design that lets air pass freely around the barrel and dissipate heat faster than other styles. Don’t let the handguard’s fragile appearance fool you, it can withstand 100 lbs. of pressure in any direction and 400 lbs. lengthwise. These handguards are comfortable to grasp, while they give your rifle a unique, aggressive appearance. And the tough Cerakote finish easily withstands the heat from sustained firing. With a 1.75" inner diameter, there is plenty of clearance for tucking sup-pressors, large muzzle devices or clamp-on gas blocks under the handguard. Free-floats the barrel; billet aluminum caps at both end add stability, while Brigand's ultra-light aluminum barrel nut (includ-ed) keeps the 'guard securely in place. Edge has straight cut off ends, while Blade model has a beveled forward end that gives a sleeker appearance. AR-308 fits Armalite® AR-10® and DPMS LR-308 "high" receivers and clones. Compatible with all Brigand Arms handguards, the 2.5" Picatinny Rail Segment comes with a special backing plate to ensure any accessory added to the handguard stays in place. Rail segment comes with Allen wrench. abSPECS: Braided carbon fiber rods, Cerakote, matte black. All metal com-ponents are 6061 aluminum and hardcoat anodized, matte black. 1.75" (4.4cm) I.D.. 2" (5.1cm) O.D.

Super Lightweight, Unrestricted Cooling & Looks Different From Any Other Handguard

Edge Handguard

#100-022-529AV 7" Edge Handguard , 3K222E00 � � � � $ 233.10#100-022-530AV 9" Edge Handguard, 3K239B15 � � � � � 251.10#100-022-531AV 12.375" Edge HG, 3K282B00 � � � � � � � 296.10#100-022-532AV 15" Edge Handguard, 3K324K85 � � � � 341.10#100-024-765AV AR-308 12" Edge HG, 3K294H85 � � � 309.60#100-024-766AV AR-308 15" Edge HG, 3K337F72 � � � � 354.60#100-022-533AV 7" Blade Handguard , 3K230D58 � � � 242.10#100-022-534AV 9" Blade Handguard, 3K247M70 � � � � 260.10#100-022-535AV 12.375" Blade HG, 3K290C57 � � � � � � � 305.10#100-022-536AV 15" Blade Handguard, 3K333P45 � � � 350.10#100-022-537AV 2.5" Picatinny Rail Segment,

3K33E43� � � � � � � � � � � � � � � � � � � � � � � � � � 35.10

Blade Handguard

BRIGAND ARMS AR-15/AR-308

EDGE & BLADE HANDGUARDS

Made of a featherlight carbon fiber material that's as tough as steel, the Carbon Black EDGE offers multiple M-LOK® slots (3, 6, 9 and 12 o’clock) for mounting accessories exactly where you need them. It free-floats the barrel, so the ’guard & attached accessories have no effect on your gun's accuracy. It lets plenty of air pass freely around the barrel to dissipate heat, so your rifle’s point-of-impact won’t drift during rapid fire. But don’t let the Carbon Black’s slim shape fool you - it can withstand 100 lbs. of pressure in any direction and 400 lbs. lengthwise. It's also comfortable to grasp, while it gives your AR-15 a sleek, uniquely aggressive look that harmonizes with standard AR-15/M16 barrel/receiver finishes. High-stability carbon fiber material provides exceptional resistance to warpage due to temperature cycling, so an "iron" front sight or aiming laser mounted to the Carbon Black EDGE retains accuracy during sustained fire. Aluminum end caps enhance structural rigidity & resistance to im-pact. Clamps securely to receiver via the included ultralight bar-rel nut. With a 1.75" inside diameter, the Carbon Black EDGE has plenty of clearance for tucking suppressors, large muzzle devices, or clamp-on gas blocks under the handguard. This is the second lightest handguard on the market, after the original Brigand Arms Edge and Blade ’guards. The 12" model weighs in at just under 7 oz., INCLUDING the barrel nut! ab

BRIGAND ARMS AR-15 CARBON BLACK EDGE HANDGUARD

Light Weight, Stealth & Good Looks Without Sacrificing Accessory-

Mounting Options

#100-027-940AV Carbon EDGE HG, 7", 3K170M58 � � � � $ 179.10#100-027-941AV Carbon EDGE HG, 9", 3K187A71 � � � � 197.10#100-027-942AV Carbon EDGE HG, 123/8", 3K204F85 � 215.10#100-027-943AV Carbon EDGE HG, 15", 3K230Q56 � � 242.10

The Brigand Arms Atlas carbon fiber weave handguard is a pre-mium handguard upgrade for your defensive or sporting rifle. It features a cutting edge appearance in addition to ultra lightweight materials and a truly free-floating design. Despite its futuristic looks and benefits, the Atlas is fully customizable when paired with the Brigand Arms 2.5" Picatinny Rail Segment (sold separately, be-low). This allows for the addition of the accessories you want while still maintaining a lightweight rail. Lightweight braided carbon fi-ber material, matte black. Free-floats the barrel. Barrel nut and all required mounting hardware included. The Brigand Arms AR-15 Atlas Carbon Fiber Weave Handguard allows for "out-of-the-box" install its lightweight performance will take your M4-style carbine to the next level. ab

Ultra-Lightweight Basket-Weave Design for Easy Barrel

Cooling - No Sacrifice of Accessory-Mounting Freedom

#100-024-761AV 7" Atlas Handguard, 3K239L15 � � � � � � $ 251.10#100-024-762AV 9" Atlas Handguard, 3K256M30 � � � � � 269.10#100-024-763AV 12" Atlas Handguard, 3K342F00 � � � � � 359.10#100-024-764AV 15" Atlas Handguard, 3K342A00 � � � � � 359.10#100-024-767AV AR-308 12" Atlas HG, 3K312J00 � � � � � 327.60#100-024-768AV AR-308 15" Atlas HG, 3K354F85 � � � � � 372.60#100-022-537AV 2.5" Picatinny Rail Segment,

3K33E43� � � � � � � � � � � � � � � � � � � � � � � � � � � 35.10

BRIGAND ARMS AR-15

ATLAS HANDGUARD

Our BRN-10 Retro Slip Ring replicates the contour of the slip rings used on early M16 rifles, so it’ll add an extra touch of period authentic-ity to your next "retro" AR-style .308 build. Just combine the BRN-10 slip ring with a .308 barrel

nut, handguard spring, and snap ring to add the correct handguard retention hardware to your barrel. The "flat" exterior of the Brownells BRN-10 Retro Slip Ring enables the use of non-free-float drop-in handguards on your AR-308. All-aluminum construction with flat exterior, no taper like modern delta rings. Fits both DPMS LR-308 and Armalite® AR-10® rifles and clones. (Barrel nut, handguard spring, and snap ring not included, available separately.) The BRN-10 Retro Slip Ring is even finished in the correct XM gray anodizing of the 1950s and 1960s. All in all, a "vintage" detail that enhances the vintage feel of a retro Big AR-308 build. ab

AR-308

BRN-10 SLIP RINGAn Extra Touch of Retro Authenticity

for Your "Vintage" .308 AR

#078-000-388AV BRN-10 Slip Ring, 3G18I79 � � � � � � � � � � �$ 19.99


brownells.com

We call this handguard the "Wrenchman" because you can install it with a standard crescent wrench. It requires NO expensive propri-etary wrench that you can only use on this 'guard. The Wrenchman free-floats the barrel and has a Picatinny rail on top and rows of true M-LOK® slots in the 3, 6 and 9 o'clock positions. Those require-ments are a "given" on a modern, up-to-date tactical handguard. Developed in partnership with Primary Weapon Systems, we insisted it also had to be easy to install (more on that in a bit) and one more thing: it had to come in WAY below the current price point for such handguards without sacrificing quality. We believe we have suc-ceeded on all counts.

The core of the Wrenchman's ease of installation is the hefty steel barrel nut that you install using a simple, hardware-store cres-cent wrench. Teeth on the handguard and notches in the exterior of the barrel nut - PLUS the included plastic "timing" tool - make it very easy to get the handguard aligned properly with the receiver's Pica-tinny rail and the gas tube. When installed, the Wrenchman offers an extremely solid accessory-mounting platform with an "of a piece" feel with the rest of the rifle. The Standard Wrenchman is secured to the barrel nut via two hefty, hardened steel crossbolts. For an extra-secure installation and rock-solid mounting of accessories such as a bipod on your PRS, varmint, or target rifle, the Precision Wrench-man has three clamping bolts, plus an ARCA-Swiss adapter located just underneath the barrel nut secure attachment of a bipod. abSPECS: Machined aluminum construction with mil-spec hardcoat anod-ized finish, matte black. 1.25" I.D. clearance for low-profile gas block.

AR-15/M16

WRENCHMAN FREE-FLOAT M-LOK® HANDGUARD

A Robust, Feature-Packed Modular Handguard That Is Easy To Install AND Won't Break the Bank!

#078-000-510AV Wrenchman HG, 10½", 7D108L34 � � �$ 119.99#078-000-509AV Wrenchman HG, 125/8", 7D116B67 � � � � 127.99#078-000-508AV Wrenchman HG, 15", 7D125G00 � � � � � 135.90#078-000-512AV Precision Wrenchman Handguard,

125/8", 7D125D00 � � � � � � � � � � � � � � � � � � � 139.99#078-000-511AV Precision Wrenchman Handguard,

15", 7D138H35 � � � � � � � � � � � � � � � � � � � � � 149.99

AR

-15

/M16


SINCE 1939

HA

ND

GU

AR

DS

Many AR-15 enthusiasts don't know that Eugene Stoner's origi-nal AR prototype was actually chambered for the .308 Winchester cartridge. Only later did the 5.56 NATO rifle emerge as the primary design. Our BRN-10 'guard is a detailed reproduction of the original handguard found on these prototype .308 Winchester-chambered rifles. It has the classic rounded cross-section of the 1950s-era handguards with six venting holes on each side to promote barrel cooling. Even better: while our handguard looks entirely authentic, it's manufactured from a modern reinforced molded polymer that is FAR stronger than the original's somewhat fragile (OK, more fragile than modern plastic) fiberglass material. And our handguard is avail-able in three colors - black, O.D. green, and brown - to match the stock colors used on various early Armalite AR-10 rifles, so you can keep your "Retro Repro" rifle build entirely authentic. It is designed for use with rifle-length gas systems and requires a round front handguard cap for installation. ab

An Accurate Repro Handguard for Your Retro AR-308

#078-000-397AV BRN-10 "Prototype" Hg, Blk, 6D25H79 � � $ 29.99#078-000-398AV BRN-10 "Prototype" Hg, Brown, 6D22P99 � � 29.99#078-000-399AV BRN-10 "Prototype" Hg, Green, 6D25H79 � � 29.99

AR-308

BRN-10 "PROTOTYPE" HANDGUARD

Free-float carbine handguard with four MIL-STD 1913 Pica-tinny rails installs in minutes with no permanent modifications to weapon. Two-piece design allows installation using basic tools and the included hex key. Tighten the four Allen-head screws against the barrel nut with the hex key to eliminate movement and align the extended top rail with the receiver rail for an exceptionally long expanse of uninterrupted accessory mounting space. Plenty of ventilation cuts keep barrel cool and minimize weight—perfect for tactical rifles where every ounce saved improves speed and maneu-verability. Rail slots are indexed with white letters and numbers for precise positioning and remounting of accessories. Receptacles for push-button QD sling swivels in the side rails have built-in rotation limiters. Precision machined from 6061 T6 aluminum and mil-spec Type 3 hardcoat anodized for added strength and a rock-hard sur-face that resists wear and scuffing. Clamps directly to factory barrel nut; remove it and reinstall factory handguard any time. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes mounting screws, ladder-style rail covers, and instructions. 63/8" (16.2cm) long. Top Rail - 7" (17.8cm) long. 7.6 oz. (217g) wt. Fits AR-15 with carbine-length gas system.

Lightweight, Versatile & Easy To Install Rail Systems

Maximize Accessory Mounting Options

#100-003-309AV Omega Rail 7.0 Carbine, 8K189A00 � � $ 189.00


OMEGA RAIL 7.0

Two-piece, four-rail handguard installs easily and gives flattop receivers a continuous 12 o’clock rail. Clamps directly to standard barrel nut and features T-marks for proper optic and accessory remounting reference. Machined aluminum construction combines strength with light weight. Free floats the barrel. Available for Carbine, Mid-Length and Rifle gas systems. Carbine Cutout model extends rails 3/4" around sides of front sight base on carbine-length gas systems. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 2.1" (5.3cm) wide. 2.38" (6cm) high. 1.37" (3.4cm) inner dia. Includes mounting hard-ware and instructions.

Railed Handguard Installs Without Removing Front Sight Or Muzzle Device

STOCK #TOP RAIL LENGTH WT. MODEL PRICE

#100-009-819AV 7" 8.5 oz. Carbine 4D210A13 $ 217.99#100-009-823AV 7.25" 10.5 oz. Carbine Cutout 4D255N86 $ 266.00#100-009-820AV 9" 10.7 oz. Mid-length 4D237I54 $ 246.99#100-009-821AV 10" 11.4 oz. Mid-length 4D250D71 $ 256.99#100-009-822AV 12" 14.2 oz. Rifle 4D286H11 $ 295.99

CENTURION ARMS AR-15/M16

C4 RAIL SYSTEM

Daniel Defense’s MFR XS M-LOK free-floating handguard com-bines the popular M-LOK accessory attachment system with excel-lent weight savings, as well as superior cooling and ergonomics. Daniel Defense employs a unique bolt-on system that lets you at-tach the MFR XS to a standard AR-15 barrel nut, which helps keep the outside diameter of this handguard to a minimum, making it easy to grasp, helping you control your rifle. The MFR XS offers seven rows of M-LOK attachment points on the sides and bottom, along with an uninterrupted MIL-STD 1913 Picatinny top rail. Integrated in both the left and right side rails are ambidextrous QD pushbutton sling swivel attachment points. Anti-rotation tabs to keep the handguard aligned with the receiver. Can be used with a pinned low-profile gas block on pistol, carbine, mid-length or rifle length gas systems. abSPECS: Machined 6061 T6 aluminum, Type III hardcoat anodized finish, matte black. Grade 8 military specification fasteners used throughout.

DANIEL DEFENSE

MFR XS HANDGUARDEasy Handling & Plenty

Of Room For Accessories

#100-024-353AV MFR XS Handguard 9", 8K245P32 � � $ 256.00#100-024-354AV MFR XS HG 10", 8K245D32 � � � � � � � � 256.00#100-024-355AV MFR XS HG 13.5", 8K254C65� � � � � � � 265.00#100-024-356AV MFR XS HG 15", 8K273P32 � � � � � � � � � 284.00

Machined aluminum handguard mounts onto your AR-15 and free floats the barrel to relieve stress and help en-hance accuracy potential. Fits all stan-dard size uppers and includes barrel nut for fast and easy installation. Accepts standard barrel nut wrenches and features knurled center section for secure grip. Rifle handguard has 5 longitudinal flutes to save weight, and 10 slots cut in the muzzle end to help improve air flow and help speed cooling. Carbine hand-guard has 8 longitudinal flutes to save weight. Pistol handguard has no flutes or slots. abSPECS: 6064 T6 aluminum, hardcoat anodized, matte black finish. 2"(5cm) O.D., 1¾"(4.4cm) I.D. Includes barrel nut. Rifle – 12.5" (32cm) long, 13.1 oz. (371g) wt. Carbine - 7" (18cm) long, 8.1 oz. (229g) wt. Pistol – 4" (10cm) long. 5.3 oz.(150g) wt.

DOUBLE STAR FREE-FLOAT HANDGUARDIncludes Barrel Nut For Fast Installation

Pistol Handguard

#100-012-509AV Rifle Handguard, 2Z62P86 � � � � � � � � � � �$ 69.99#100-012-511AV Carbine Handguard, 2Z50J00� � � � � � � � 54.99#100-012-510AV Pistol Handguard, 2Z44P29 � � � � � � � � � � 49.99

Carbine Handguard

Rifle Handguard

Slim, Lightweight, Modular rail uses the KeyMod attachment method for superb accessory mounting versatility, weight savings, and operator comfort. Continuous MIL-STD 1913 Picatinny rail across the top and KeyMod cutouts running the length of the hand-guard in the 3, 6, and 9 o’clock positions ensure plenty of real estate for direct-install lights, grips, sights, optics - whatever accessory you need. Put the small bolt-on rail sections only where needed. T-marks and recoil-resistance of KeyMod system aid in quick “re-turn-to-zero” when accessories are removed and reinstalled. Plenty of ventilation openings keep barrel temperature down and keep weight down, while the smooth, low-snag surface is easy to grasp. Free-floats the barrel to eliminate pressure and flexing that could hurt accuracy. Includes two-piece steel barrel nut that secures the handguard in place and simplifies alignment with the upper receiver. Two sling swivel sockets at rear, in 1 and 11 o’clock positions. abSPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. 1.74" (4.4cm) wide. 2.09" (5.3cm) high. 1.08" (2.7cm) inside diameter. 9" - 8.8 oz. (249.5g) wt.; 12" - 9.9 oz. (280.7g) wt.; 15" - 11.2 oz. (317.5g) wt. Fits standard mil-spec AR15/M16 upper receivers. Includes barrel nut, rear clamp, 4 mounting screws, Allen and barrel nut wrenches. #100-018-842AV 9" SLiM Rail, 8K256C00 � � � � � � � � � � � $ 256.00#100-016-312AV 12" SLiM Rail, 8K265Q00 � � � � � � � � � � 265.00#100-016-311AV 15" SLiM Rail, 8K284L00 � � � � � � � � � � � 284.00


SLIM RAIL™Versatile Accessory Mounting,

Plus Weight Savings To Promote Fast, Precise Handling

Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injec-tion-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. M4 is the standard-issue model with asingle-layer heat shield inside. Skinny M4 model has narrower diameter for operators who pre-fer a minimal bulk handguard. Both models fit AR-15/M16/M4 with

DOUBLE STAR AR-15/M16/M4

CARBINE HANDGUARDRugged, Drop-In Replacement For

M4-Style Factory Handguard

#100-004-513AV M4 Carbine Handguard, Single Shield, 2Z12M08 � � � � � � � � � � � � � � � � � � $ 13.19

#100-004-515AV Skinny M4 Carbine Handguard, 2Z12P98 � � � � � � � � � � � � � � � � � � � � � � � � � � 14.29

carbine-length gas system. abSPECS: Fiberglass-reinforced polymer, matte black. 61/2" (16.5cm) long. Standard – Approx. 21/2" (6.4cm) O.D. at rear tapering to 21/4" (5.7cm) O.D. at front. Skinny – Approx. 21/4" O.D. at rear tapering to 2" (5.1cm) O.D. at front.

This carbon fiber handguard is lightweight for sure (only 8 oz. for the 15" model), but it is actually stronger than aluminum - and 40% lighter. This keeps the weight of your rifle down, making it sig-nificantly more maneuverable. Saving weight doesn’t mean you give up accessory mounting flexibility. The Streamline has 8 full-length rows of M-LOK slots so you can put your accessories exactly where you want them. Low heat-transference properties protect your hand from hot barrel during long shooting sessions. Plenty of clear-ance inside for common suppressors to fit under the handguard. Easy to install using the included standard AR-15 barrel nut. When mounted correctly, the Streamline is locked in to position across all three axes, ensuring a stable platform that’s going to stay up, even in the most demanding circumstances. ab


STREAMLINE FREE-FLOAT HANDGUARDAll the Accessory-

Mounting Versatility of an Aluminum Handguard

Without the Weight

#100-026-114AV Streamline HG, 10", 1D312I55 � � � � � � �$ 312.55#100-026-113AV Streamline HG, 13", 1D322N05 � � � � � � 322.05#100-026-112AV Streamline HG, 15", 1D331K55 � � � � � � � 331.55

Ultra-lightweight M-LOK® modular handguard is de-signed to let the user tailor the platform to meet their specific needs. Handguard has a full length MIL-STD 1913 Picatinny rail section along the top with shorter rail sections at the 3, 6 and 9 o'clock around the muzzle to accom-modate popular accessories. M-LOK® slots are located at the 3, 6 and 9 o'clock positions as well as the upper 45° quadrants, allowing the user to maintain versatility for accessory attachment. Recep-tacles for QD swivels are located at both the muzzle and receiver ends of the handguard. The MK4 has Geissele's proprietary 2.25" long barrel nut for a large surface contact between the nut and the handguard to a solid platform that's straight and true. This aids in maintaining accuracy and repeatability of zero during disassembly and reassembly when performing maintenance. Machined from a single piece of aircraft grade aluminum billet, the rigid handguard has maximum ventilation for heat dissipation and weight reduction. Hardcoat anodized finish in basic black (BLK) or Geissele's Desert Dirt Color (DDC). ab

GEISSELE AR-15/M16

MK4 SUPER MODULAR RAILAn M-LOK®/Picatinny Hybrid

Handguard Designed for Maximum Modularity &

Versatility

#100-030-491AV 7" MK4 Super Modular Rail, BLK, 7B00JAS � � � � � � � � � � � � � � � � � � � � � � � � � $ 225.00

#100-030-492AV 7" MK4 Super Modular Rail, DDC, 7B00FTF� � � � � � � � � � � � � � � � � � � � � � � � � � 250.00

#100-015-365AV 9.5" MK4 Super Modular Rail, BLK, 7B250C00 � � � � � � � � � � � � � � � � � � � � � � � � 250.00

#100-015-366AV 13" MK4 Super Modular Rail, BLK, 7B275E00 � � � � � � � � � � � � � � � � � � � � � � � � 275.00

#100-017-389AV 15" MK4 Super Modular Rail, BLK, 7B300C00 � � � � � � � � � � � � � � � � � � � � � � � � 300.00

#100-017-390AV 15" MK4 Super Modular Rail, DDC, 7B300C00 � � � � � � � � � � � � � � � � � � � � � � � � 300.00

The ultra lightweight, super-slim handguard from Foxtrot Mike Prod-

ucts are completely compatible with M-LOK accessories and engi-neered to be as slim as possible. Manufactured from 6061 T6 alumi-num, the FM handguard free-floats the barrel and come with Foxtrot Mike’s proprietary steel barrel nut for easy, secure installation. With seven rows of M-LOK slots and a full-length Picatinny rail up top, this handguard gives you acres of real estate for mounting acces-sories exactly where you want them. Manufactured in ISO:9001 & AS:9100 quality-certified facility. Tough, mil-spec Type III hardcoat anodized finish resists corrosion, blends with most receiver fin-ishes. This lightweight handguard delivers the whole package: the accuracy-preserving benefits of a free-floated barrel plus incredible accessory-mounting freedom. ab

FM PRODUCTS AR-15/M16

FM-9 FREE-FLOAT HANDGUARDPlenty of Acreage for All Your

Accessories

#100-026-235AV FM-9 FF Handguard, 8.5", 6D59J00 � � $ 59.00#100-024-849AV FM-9 FF HG, 10.5", 6D74B29 � � � � � � � � 79.00#100-024-848AV FM-9 FF Handguard, 15", 6D85B71 � � � 89.00

AR

-15/M

16


brownells.com

HA

ND

GU

AR

DS

These free-floating handguards have Geis-sele's proprietary 2.25" long barrel nut, which offers an unusually large area of surface con-tact with the handguard. The result is an an extremely solid platform between the receiver and the handguard that's straight and true the entire length of the handguard. This increases accuracy and repeatability of zero after disassembly/reassembly for maintenance. You want modular? Geissele's MK8 SMR delivers it in spades! It's strong, yet super lightweight because it’s covered with M-LOK® slots (at 3, 6, 9 o'clock and upper 45° quadrants) that also minimize weight and provide ventilation to disperse barrel heat. Extra-long barrel nut gives rock solid attachment and makes it easy to align the MK8. Even comes with a low-pro (.750") gas block. Large vent in the lower 45° quadrants allow maximum heat dissipation to keep the barrel cool while also dramatically reducing weight. 1.350" I.D. The MK7 Na-tional Match is a CMP-legal rail system devloped specifically for use in National Match High Power Competition. It is a full quad rail, with a traditional sling loop up front, in the appropriate competition-legal location. The sling loop is attached to a steel bar which is fastened directly to the rail using screws. Lead weight bars (sold separately, below) can be fastened in the 3 and 9 o'clock positions to add weight as needed to balance the rifle per the shooter's preference. The MK7 is completely free floating so the handguard will have no accuracy-compromising effects on your rifle's barrel. ab


MK7/MK8 SUPER MODULAR RAIL HANDGUARDS

Versatile Handguard Systems Optimized for Specific Types of

Shooting

#100-030-494AV 7" MK8 Super Modular Rail, BLK, 7B00NDJ � � � � � � � � � � � � � � � � � � � � � � � $ 225.00

#100-015-372AV 9.5" MK8 Super Modular Rail, BLK, 7B250Q00 � � � � � � � � � � � � � � � � � � � � � � 250.00

#100-015-373AV 13" MK8 Super Modular Rail, BLK, 7B275E00 � � � � � � � � � � � � � � � � � � � � � � 275.00

#100-015-374AV 15" MK8 Super Modular Rail, BLK, 7B300M00 � � � � � � � � � � � � � � � � � � � � � 300.00

#100-020-759AV 12.7" MK7 National Match Handguard, BLK, 7B375P00 � � � � � � 375.00

#100-030-495AV 12.7" MK7 National Match Handguard, DDC, 7B00JMS � � � � � � 400.00

#100-017-392AV MK7 Lead Rail Weight, 7B25J00 � � 25.00

MK8

MK7 National Match

NOTE ABOUT GEISSELE'S "DESERT DIRT COLOR" (DDC)

Due to the chemical process involved in anod-izing, the ultimate color of the finish can vary from one handguard to the next, even within the same batch. And the way these colors appear in photos will vary from real life. Differing shades of DDC are not a problem, and actually desired, on a military small arm to breakup the outline of the weapon. The only way to achieve a uniform color match on all parts and accessories is to coat it with a different finish, for example Cerakote™ or DuraCoat. How-ever please be aware, that these finishes will not be as durable as the original anodizing and may be more easily prone to scratches and scrapes.

#100-025-745AV 7" MK14 Super Mod HG, BLK, 7B00BBN � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 250.00

100-027-828AV 7" MK14 Super Mod HG, DDC, 7B275N00 � � � � � � � � � � � � � � � � � � � � � � � � � � � 275.00

#100-025-746AV 9.5" MK14 Super Mod HG, BLK, 7B00NYB � � � � � � � � � � � � � � � � � � � � � � � � � � � � 250.00

100-027-829AV 9.5" MK14 Super Mod HG, DDC, 7B275N00 � � � � � � � � � � � � � � � � � � � � � � � � � � � 275.00

#100-025-747AV 13" MK14 Super Mod HG, BLK, 7B250C00 � � � � � � � � � � � � � � � � � � � � � � � � � � � 250.00

100-027-830AV 13" MK14 Super Mod HG, DDC, 7B275J00 � � � � � � � � � � � � � � � � � � � � � � � � � � � 275.00

#100-025-748AV 15" MK14 Super Mod HG, BLK, 7B300Q00 � � � � � � � � � � � � � � � � � � � � � � � � � � 300.00

100-027-831AV 15" MK14 Super Mod HG, DDC, 7B325N00 � � � � � � � � � � � � � � � � � � � � � � � � � � � 325.00

Geissele's MK14 Super Modular Rail handguard has a slim cross-section that makes it ideal for shooters who use rail covers and/or a vertical grip, and who also like a thumb-over-the-bore grasp. Similar to their MK13 SMR, the Geissele MK14 delivers acres of real estate for mounting accessories, with M-LOK slots running the handguard’s full length at the 3, 6, and 9 o'clock positions. It also sports a Picatinny rail running the full length of the top. Geissele even thoughtfully includes sockets for QD pushbutton sling swivels at the 11 and 1 o’clock posi-tions at the rear. The MK14 free-floats the barrel using an easy-to-install proprietary barrel nut (wrench included). The nut is 2.25" long, so there’s plenty of surface area for secure, rigid, straight anchoring of the handguard in place. AND a low-profile stainless steel Geissele Super Gas Block is included, to round out the package so you don’t have to buy anything more to install and enjoy the many benefits of your MK14 SMR. abSPECS: Machined 6061 T6 aluminum, Type III hardcoat anodized, matte

Narrow Profile for a Comfortable Hold - Plenty of Accessory Mounting Possibilities


MK14 SUPER MODULAR RAIL

Desert Dirt Color

Colors

black (BLK) or Geissele's special Desert Dirt Color (DDC). Available in 7", 9.5", 13", and 15" lengths. Proprietary free-float barrel nut & stainless steel low-profile gas block included.

HOGUE AR-15/M16

FREE-FLOAT FORENDS

Machined aluminum free-float forends provides an exceptionally positive, non-slip gripping sur-face for the support hand to help ensure maximum weapon control. Cobblestone-texture Overmolded™ rubber grasping surface is easy on the hand. Easy-to-install, two-piece free-float design eliminates handguard stress on the barrel that can compromise accuracy. Use with rifle’s factory gas tube; if changing barrel length, purchase re-placement gas tube of appropriate length. Available in Rifle- and Carbine-length models. Further enhance comfort and controlabil-ity of your rifle by pairing up with Hogue pistol grip, below. SPECS: Aluminum, hardcoat anodized, matte black, with synthetic rub-ber covering Overmolded on grasping surface. 2" (5cm) O.D., 1.625" (41.3mm) I.D. Rifle - 121/4" (31.1cm) long. Fits AR-15/M16 and clones with rifle-length gas system. Carbine – 71/8" (17.8cm) long, 2" diameter. Fits AR-15/M16/M4 with carbine-length gas system.

PISTOL GRIP - Strong, fiberglass insert fits solidly against the frame, resists wear, won’t loosen. Ortho-pedic design with palm swells and finger grooves re-duces shock, increases shooting comfort; maintains a stock appearance.SPECS: Molded synthetic rubber exterior over fiberglass core, black. #408-150-000AV Pistol Grip, Black, 8K21D01 � � � � � � � � � $ 21.99

#408-150-020AV Rifle Forend, Overmolded/Black, 8K76E45 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 80.99

#408-150-120AV Carbine Forend, Overmolded, 8K76M45 � � � � � � � � � � � � � � � � � � � � � � � � � � 80.99

Ultra-Secure, Non-Slip Gripping Surface For Maximum Weapon

Control

The MK III series is the latest develop-ment in the on-going evolution of JP’s modular free-float handguard system, with outstanding versatility and a clean, streamlined appearance. MK III tubes accept all standard JPTR bolt-on rails and accessories, sold separately, so you can install rails only where you need them, for great savings in weight and bulk. Ergonomically optimal 2" tube diameter is comfortable for most hands while still providing enough internal clearance for most low-profile gas blocks. Redesigned steel barrel nut enables easy, fast barrel installation and replacement, and won’t distort under stress like one-time-use aluminum barrel nuts. For extra versatility, when the JP nut is installed, you can remove the current handguard any time and swap on any other JP handguard. Attachment system for the handguard dramatically improves structural integrity AND al-lows for perfect alignment to bore axis like a one-piece, monolithic upper receiver/handguard. MK III system offers perfect continuity between the receiver rail and (when installed) the top rail on the handguard with no gaps, for complete flexibility in mounting optics. Exterior surface is rock-blasted to provide a highly effective non-slip grip. All MK III handguards come with two JPHGS bolt-on quick-detach sling swivel studs. AR- 308 has unique “eccentric” barrel nut that enables the narrow 2" OD tube to cover the 308’s larger barrel nut to give your 308 an unusually slim, streamlined handguard. Rail Kits are all sold separately; designed for JP system, will also work with many other free-float tubes. abSPECS: 6061 T6 aluminum tube, 4140 steel barrel nut, matte black fin-ish. 15½" OAL. 2" O.D. 1.75" internal clearance. AR-308 model fits DPMS LR-308, Knights Armament SR-25, Bushmaster .308 rifles, and other .308 rifles with: 17/16"-18 tpi receiver thread pattern and max. 1.170" barrel O.D.

JPHGS SLING SWIVEL STUD - Heavy duty steel stud clamps securely into any of the cooling slots on a V-Tac handguard to provide a forward sling-mounting point. Also accepts a folding bipod that attaches to a swivel stud.SPECS: 6061 T6 aluminum base, hardcoat anodized, matte black. Steel stud, black oxide finish.#452-000-076AV JPHGS Swivel Stud, 2E8L13 � � � � � � � � � � �$ 9.59

JP ENTERPRISES AR-15/M16/AR-308

MK III SIGNATURE SERIES MODULAR HANDGUARDS

Latest-Generation Modular ’Guard Gives Superb Versatility, Minimal Weight & Sleek Appearance

#452-000-187AV JPHG3-6M AR-15 MK III Handguard, 15½", 2E202G90 � � � � � � � � � � � � � � � � � � $ 223.99

#452-000-185AV JPHG3-1D AR-308 MK III Handguard, 15½", 2E202H90 � � � � � � 223.99

#452-000-035AV 2" JP Tactical Rail, 2E30L92 � � � � � � � � 32.99#452-000-036AV 4" JP Tactical Rail, 2E44A57 � � � � � � � � 46.99

Ideal for clone builds of early rifles and carbines is-

sued to Special Operations units, the Free Float RAS hand-

guards provide plenty of real estate for your accessories. A full length M1913 Picatinny top rail, plus additional rails at the 12-, 3-, 6-, and 9 o'clock positions, make this handguard perfect for mounting any number of rail-mounted, tactical accessories. The free floating rail increases accuracy potential by allowing for consistent barrel har-monics. Forend uses a proprietary barrel nut that may be installed using a standard AR-15 armorer's barrel nut wrench. MRE model w/Filler Rail Kit includes a space for the M4 front sight base, giving you an extra platform for lights, laser range finders, night vision illumina-tors, and other top mounted accessories. Handguards have a 1.444" ID and require a carbine or mid length gas system and a low profile gas block. Compatible with AR-15/SR-15 based platforms only; will not work with SR-25 variants. ab

KNIGHT'S ARMAMENT AR-15/M16/M4

RAS FREE-FLOAT HANDGUARDSAuthentic Part for Clone Builds of Early SOCOM

Rifles

#100-027-603AV Carbine RAS HG, 71/8", 4C00DNH � � $ 325.26#100-027-604AV Long Carbine RAS HG, 81/8", 4C00LQQ � � 337.90#100-027-605AV Mid-Length RAS HG, 93/8", 4C00KDR � � 341.04#100-027-606AV MRE RAS Handguard w/Filler Rail

Kit, 123/8", 4C512A20 � � � � � � � � � � � � � � 512.20

Stock numbers shown in red indicate the product is made or assembled in the U.S.Aab

This information is not available for all products at time of catalog production, but will be regularly updated on our website�

The MK13 is the latest in Geissele’s series of machined alumi-num, accessory-ready tactical AR-15 handguards. The MK13 has a smaller diameter than many aluminum ’guards, making it easier to grasp for those with smaller hands AND those who prefer the thumb-over-the-bore support grip. Geissele covers the MK13 with a plethora of M-LOK slots at the 3, 6, and 9 o’clock positions, plus a full-length topside Picatinny rail and three short Picatinny rail sec-tions machined into the handguard at the front of each M-LOK row. All of this adds up to a whole lot of options for putting accessories exactly where they work best for you. Pushbutton QD sling swivel sockets at the 1 and 11 o’clock rear positions. The Geissele MK13 Su-per Modular Rail handguard comes with a low-profile stainless steel Geissele Super Gas Block and a barrel nut that free-floats the hand-guard while anchoring it securely so it remains straight and rigid. abSPECS: Machined 6061 T6 aluminum, Type III hardcoat anodized, matte black (BLK) or Geissele's special Desert Dirt Color (DDC). Proprietary free-float barrel nut & wrench included. Available in 7", 9.5", 13", and 15" lengths.

Easy-To-Grasp Narrow-Diameter Tactical ’Guard With Impressive Accessory-Mounting Versatility

#100-025-741AV 7" MK13 Super Mod Handguard, BLK, 7B00GDR � � � � � � � � � � � � � � � � � � � � $ 250.00

100-027-824AV 7" MK13 Super Mod Handguard, DDC, 7B00ADR � � � � � � � � � � � � � � � � � � � 275.00

#100-025-742AV 9.5" MK13 Super Mod Handguard, BLK, 7B250C00 � � � � � � � � � � � � � � � � � � � 250.00

100-027-825AV 9.5" MK13 Super Mod Handguard, DDC, 7B00FBH � � � � � � � � � � � � � � � � � � � 275.00

#100-025-743AV 13" MK13 Super Mod Handguard, BLK, 7B250Q00 � � � � � � � � � � � � � � � � � � � 250.00

100-027-826AV 13" MK13 Super Mod Handguard, DDC, 7B00GRI � � � � � � � � � � � � � � � � � � � � 275.00

#100-025-744AV 15" MK13 Super Mod Handguard, BLK, 7B300C00 � � � � � � � � � � � � � � � � � � � 300.00

100-027-827AV 15" MK13 Super Mod Handguard, DDC, 7B00IZK � � � � � � � � � � � � � � � � � � � � 325.00


MK13 SUPER MODULAR RAIL HANDGUARD

Colors

AR

-15

/M16


SINCE 1939

HA

ND

GU

AR

DS

Upper Receiver Extending rail adapter systems are free-floating,

fully modular forends that let you optimize your AR-15 platform without compromising accuracy potential. Continuous MIL-STD 1913 Picatinny top rail is accompanied by rows of KeyMod cutouts that let you place accessories exactly where you need them without the use of specialized tools, small parts, or pressure applied to the barrel. One-piece construction and the absence of a removable bottom rail make the URX 4 particularly strong and stable. Integrated Barrel Nut attachment method lets the rail itself act as the nut when torqued into place - no need for a separate component. Comes with a set of shim washers to ensure precise timing onto the rifle. Built-in QD receptacle is located on each side near the receiver end. Compatible with all KeyMod accessories. abSPECS: Aluminum, hardcoat anodized, matte black. 1.68" (4.3cm) OD. 1.55" (3.9cm) ID. Includes installation wrench, shim kit, and instructions. 10" (25.4cm) - 10.08 oz. (285.8g) wt. 13" (33cm) - 12.7 oz. (360g) wt. 14½" (36.8cm) - 13.8 oz. (391.2g) wt.

Abundant Mounting Space Without Weighing Down Your Rifle

URX 4

#100-015-201AV URX 4 Forend, 10", 4C260L36 � � � � � � $ 295.99#100-015-202AV URX 4 Forend, 13", 4C00BUQ � � � � � � 289.99#100-015-203AV URX 4 Forend, 14½", 4C00ELM � � � � � 302.99

KNIGHT’S ARMAMENT AR-15/M16

URX 4 FREE-FLOAT FORENDS

Versatile, rugged Rail Adapter System handguard for the Mark 12 Mod 1 Special Purpose Rifle has been in service with a variety of military units, and is used for replica or clone builds. Full-length MIL-STD 1913 Picatinny rails in the 12, 3, 6, and 9 o’clock positions enable shooters countless ways to equip their rifle with the best tactical tool combination, from performance-enhancing flashlights, slings, or vertical grips, to scopes, lasers, and other aiming devices. Free-float design means weights of mounted accessories aren’t added to the front of the barrel, thus improving accuracy and consistency. Re-quires disassembly of rifle’s gas system and removal of the factory barrel nut. Proprietary barrel nut installs using a standard AR-15 ar-morer’s barrel nut wrench, sold separately. Comes with three Knight’s Armament 11 Rib Panels that help enhance grip, insulate the support hand from barrel heat, and protect unused rails from damage. abSPECS: Aluminum, hardcoat anodized, matte black. 12" (30.5cm) long. 19.2 oz. (544.3g) wt. Fits AR-15 and Knight’s Armament SR-15 based plat-forms with carbine- or mid-length gas system and a low-profile gas block. Not compatible with SR-25 variants. Installation instructions included. 11 Rib Panel - Reinforced polymer, black.

Essential Component For Mark 12 Mod 1 Clone Builds

#100-015-196AV RAS Free-Float Forend, 4C00PQK � � $ 354.99


RAS MARK 12 FREE-FLOAT FOREND

The Magpul MOE M-LOK handguard for AR15/M4 fire-arms with carbine-length gas systems combines the light weight of a standard hand guard with modular flexibility. De-signed with versatility in mind, M-LOK slots at the two, six, and ten o’clock positions allow the attachment of optional 1913 Picatinny rail sections and other M-LOK accessories for the direct mounting of tactical lights, slings, grips, etc. Reinforced, heat-resistant polymer construction provides opera-tional durability without the weight and expense of an aluminum rail hand guard. Front extensions and lower lip provides additional opera-tor protection from hot front sight assembly. Rails sold separately. abSPECS: Reinforced molded polymer, Black (Blk), Flat Dark Earth (FDE), O.D. Green (ODG), or Stealth Gray (Gray). Carbine – 7.1" (18cm) OAL. 6.8 oz. (192.8g) wt. Mid-Length – 9.2" (23.4cm) OAL. 8.7 oz. (246.6g) wt. Rifle – 12.6" (32cm) OAL. 12.1 oz. (343g) wt.

MAGPUL AR-15/M16

MOE® M-LOKTM HANDGUARDGives A Secure, Comfortable Grip,

Excellent Weapon Control & Versatile Accessory Mounting

#100-016-531AV M-LOK Carbine HG, Blk, 3K26B16 � � � $ 28.45#100-016-532AV M-LOK Carbine HG, FDE, 3K26J16 � � � 28.45#100-016-534AV M-LOK Carbine HG, ODG, 3K26F16 � � 28.45#100-016-533AV M-LOK Carbine HG, Gray, 3K26E16 � � 28.45#100-016-535AV M-LOK Mid-Lgth HG, Blk, 3K30P54 � � 33.20#100-016-536AV M-LOK Mid-Lgth HG, FDE, 3K30A54 � � 33.20#100-016-538AV M-LOK Mid-Lgth HG, ODG, 3K30H54 � � 33.20#100-016-537AV M-LOK Mid-Lgth HG Gray, 3K30P54 � � 33.20#100-016-539AV M-LOK Rifle HG, Blk, 3K34N90 � � � � � � 37.95#100-016-540AV M-LOK Rifle HG, FDE, 3K34H90 � � � � � 37.95#100-016-542AV M-LOK Rifle HG, ODG, 3K34E90 � � � � 37.95#100-016-541AV M-LOK Rifle HG, Gray, 3K34A90 � � � � � 37.95

Rifle

Mid-LengthRifle

CarbineUpper Receiver Extending rail adapter systems are free-floating, fully modular replacement forends that let you optimize your AR-15 platform without compromising accuracy potential. Continuous MIL-STD 1913 Picatinny top rail is accompanied by either additional Picatinny slots or a universal KeyMod interface, depending on model. Gives plenty of space for mounting sights, optics, and other tactical accessories. Machined aluminum is hardcoat anodized for strength and corrosion-resistance. Matte black. ab

URX III & URX 3.1 - Two-piece design incorporates short Picatinny rail sections in the 3, 6, and 9 o’clock positions - at the front end of URX IIIs, and at both the front and rear of URX 3.1 models. Eliminates commonly unused middle cross slots to reduce overall weight, and replaces them with slick seg-ments that accept bolt-on handstops or grip panels to create a secure, comfortable grip. Quick-detach swivel sockets are positioned on both sides for ambidextrous sling compatibility. Requires disassembly of gas system and removal of factory barrel nut. Forend’s proprietary barrel nut installs using URX Barrel Nut Wrench, sold separately. SPECS: Fits AR-15/M16 and Knight’s Armament SR-15 based platforms. Not compatible with SR-25 variants. Requires low-profile gas block. Includes barrel nut, mounting hardware, and instructions. URX III - 8" (20.3cm) - 8.6 oz. (243.8g) wt. URX 3.1 - 13½" (34.3cm) - 13.8 oz. (391.2g) wt. #100-015-197AV URX III Forend, 8", 4C00EUC � � � � � � � �$ 341.99#100-015-199AV URX 3.1 Forend, 13½", 4C301F99 � � � � 301.99#100-015-204AV URX Barrel Nut Wrench, 4C119F57 � � 128.77

URX 4 - Rows of KeyMod cutouts allow shooters to customize exactly where to place accessories without the use of specialized tools, small parts, or addi-tional forces applied to the barrel. One-piece construction and the absence of a removable bottom rail make the URX 4 particularly strong and stable. Integrated Barrel Nut attachment method lets the rail itself act as the nut when torqued into place - no need for a separate component. Comes with a set of shim washers to en-sure precise timing onto the rifle. Tubular shape follows the natural curvature of your hand for a better purchase, and no protruding rails means fewer edges to snag on a vest or gear. Built-in QD receptacle is located on each side near the receiver end. Compat-ible with several Knight’s Armament KeyMod control accessories, including a handstop, snap-on rail panels, and wire management rail panels, all sold separately.


URX FREE-FLOAT FORENDSAbundant Mounting Space Without Weighing Down Your Rifle

URX 3.1

URX 4

SPECS: 1.68" (4.3cm) outside dia. 1.55" (3.9cm) inside dia. Includes instal-lation wrench, shim kit, and instructions. 10" (25.4cm) - 10.08 oz. (285.8g) wt. 13" (33cm) - 12.7 oz. (360g) wt. 14½" (36.8cm) - 13.8 oz. (391.2g) wt. #100-015-201AV URX 4 Forend, 10", 4C260L36 � � � � � � $ 295.99#100-015-202AV URX 4 Forend, 13", 4C00BUQ � � � � � � 289.99#100-015-203AV URX 4 Forend, 14½", 4C00ELM � � � � � 302.99

The MOE-SL expands on the origi-nal MOE handguard by providing a light, sleek, slim profile that's easy to grasp and

control, with plenty of accessory mounting versatility. M-LOK slots at the 2, 6, and 10 o'clock positions enable attachment of optional Picatinny rail sections (available separately) and direct-attach M-LOK accessories for mounting tactical lights, slings, grips, etc. Large front extension and lower lip protects the shooter's from the hot gas block and maximizes usable handguard length. Reinforced, heat-resistant polymer construction provides operational durability without the weight and expense of an aluminum railed handguard. Internal alumi-num heat shield gives added protection from barrel heat. Easy-to-in-stall drop-in replacement for military-style plastic handguards using the existing delta ring and round front handguard retaining cap. abSPECS: Reinforced, heat-resistant polymer, Black, Flat Dark Earth (FDE), O.D. Green (ODG), Stealth Gray. 1.8" (4.6cm) wide s 2.4" (6.1cm) high. Models for rifles with Carbine-length and Mid-Length gas systems. Must be used with triangular A2 front sight assembly; not compatible with other gas blocks.

Sleek, Lightweight Design Replaces Bulky M4 Type Handguards

MAGPUL AR-15/M16

MOE-SL HANDGUARD

#100-015-165AV MOE-SL Carbine HG, Blk, 3K30N54 � � � �$ 33.20#100-015-166AV MOE-SL Carbine HG, FDE, 3K30H54 � � � 33.20#100-015-167AV MOE-SL Carbine HG, ODG, 3K30K54 � � 33.20#100-015-168AV MOE-SL Carbine HG, Gray, 3K30B54 � � � 33.20#100-018-025AV MOE-SL Mid-Length, Blk, 3K34E90 � � � � 37.95#100-018-026AV MOE-SL Mid-Length, FDE, 3K34Q90 � � � 37.95#100-018-027AV MOE-SL Mid-Length, ODG, 3K34K90 � � 37.95#100-018-028AV MOE-SL Mid-Length, Gray, 3K34I90 � � � 37.95

Compatible with all M-LOK hand-guards and forends, these bolt-on rail sections enable you to attach MIL-STD 1913 Picatinny rail-mounted accessories to your firearm. Machined aluminum construction means these sections are plenty strong to anchor load-bearing accessories like vertical grips or heavy laser/night vision electronics. Beveled ends eliminate sharp corners and edges that can snag on hands or clothing. Includes all necessary mounting hardware for attaching rails to M-LOK slots on aluminum or polymer handguards and forends. abSPECS: Machined aluminum, hard-anodized, matte black. 3 Slots - 1½" (3.8cm) OAL. 5 Slots - 23/8" (6cm) OAL. 7 Slots - 31/8" (7.9cm) OAL. 9 Slots - 37/8" (9.8cm) OAL.

MAGPUL AR-15/M16

M-LOK PICATINNY RAIL SEGMENTSMount Picatinny Rail Accessories

Onto M-LOK Handgaurds

#100-015-357AV 3-Slot Alum M-LOK Rail Sect, 3K14M58 � � $ 17.05#100-015-358AV 5-Slot Alum M-LOK Rail Sect, 3K16C20 � � 18.95#100-015-359AV 7-Slot Alum M-LOK Rail Sect, 3K17A83 � � 20.85#100-015-360AV 9-Slot Alum M-LOK Rail Sect, 3K19G46 � � 22.75

Lightweight, polymer snap-on rail sections let you mount MIL-STD 1913 Picatinny compatible accessories on to any M-LOK handguard or forend. Rails have beveled ends to eliminate sharp edges and prevent snagging on corners. abSPECS: Injection-molded polymer, black. Includes mounting hardware. 3 Slots - 1.6" OAL. 5 Slots - 23/8" OAL. 7 Slots - 3.3" OAL. 9 Slots - 4.1" OAL. 11 Slots - 4.9" O.A.L.

MAGPUL

M-LOK POLYMER RAIL SECTIONSAdds A Picatinny Rail Section

To Any M-LOK Handguard

#100-016-260AV 3-Slot Polymer M-LOK Rail, 3K8G08 � � � � $ 9.45#100-015-363AV 5-Slot Polymer M-LOK Rail, 3K8P08 � � � � 9.45#100-016-259AV 7-Slot Polymer M-LOK Rail, 3K11M34 � � � 13.25#100-016-258AV 9-Slot Polymer M-LOK Rail, 3K12J14 � � � � 14.20#100-016-257AV 11-Slot Polymer M-LOK Rail, 3K12G95 � � 15.15

Specially designed adapter kit enables easy mounting of M-LOK compatible acces-sories on original MOE® hand guards and forends. Adapter plate length is easily custom-ized by snapping sections off at the pre-determined locations. Kit includes different-length adapter plates and all necessary hard-ware. Note: M-LOK QD Sling Mount requires longer socket head cap screws, which are not included in the kit. abSPECS: Reinforced molded polymer, black.

MAGPUL AR-15/M16

M-LOKTM-TO-MOE® ADAPTER KITMounts M-LOK Accessories

To MOE Forends

#100-016-263AV M-LOK To MOE Adapter Kit, 3K7N40� � $ 9.45

Replacement hardware pack for use with all M-LOK accessories. This hardware set contains two T-nuts as well as two dif-ferent-length button-head cap screws to

ensure full compatibility with varying handguard/forend wall thick-nesses. A reusable, self-locking thread patch is included to ensure a secure fit of the screws that resists backing out. Made of 4140 chrome-moly carbon steel with a tough manganese phosphate finish. Always have a spare set on hand, J.I.C.! ab

MAGPUL

M-LOKTM T-NUT HARDWARE SETReplaces Dinged, Damaged Or Lost

M-LOK Hardware

#100-016-264AV M-LOT T-Nut Set, 3K4H90 � � � � � � � � � � � � $ 5.65

The M-LOK® Extended Cantilever Scout Mount lets you mount a flashlight as far forward as possible on an M-LOK handguard. Forward mounting frees up handguard space and minimizes shad-ows cast in the beam by the barrel or ac-

cessories on your gun. The MECSM uses easy-to-operate cammed T-nuts to attach directly to the handguard’s M-LOK slots. You can even mount it on any MOE® or Zhukov handguard using an M-LOK to MOE adapter (#100-016-263, sold separately). Sturdy machined aluminum construction, with non-reflective black hardcoat anod-ized finish. Recoil/impact mitigation lugs protect light & handguard, while the minimal overall profile won’t add unecessary bulk to your rifle. Accepts the SureFire Scout and Streamlight ProTac rail-mount lights. (Sorry, not compatible with the SureFire DS00 dual activation switch.) It’s a low-cost upgrade that helps you get the maximum utility from your rifle AND your light. ab

MAGPUL M-LOK® EXTENDED CANTILEVER SCOUT MOUNT

THE Way To Mount a Weapon Light on an M-LOK Handguard

#100-026-240AV M-LOK Scout Mount, 9Z30G54 � � � � � $ 33.20

Sturdy steel sling loop quickly bolts to any MOE handguard to provide the front attachment point for a Magpul MS2, MS3, or similar clip-on sling system. The MSA’s low profile resists snagging on other gear and clothing and keeps hand-guard uncluttered. Hard Melonite® QPQ finish resists corrosion. abSPECS: Steel, matte black Melonite QPQ finish. 1.7" (44mm) long, .9" (24mm) wide. 1.1 oz. (31g) wt. Includes hex-head screw and mounting plate.

Low-Profile Attachment Point For Clip-On Slings

#100-008-882AV MOE Sling Attachment, 9Z21Q34 � � � � $ 23.70

MAGPUL AR-15/M16

MSA™ MOE® SLING ATTACHMENT

AR

-15/M

16


brownells.com

HA

ND

GU

AR

DS

MAGPUL BOLT-ON ACCESSORIES FOR ORIGINAL MOE® HANDGUARD

Provides Easy, Fast Accessory Mounting Customization On Handguard

ab

ACCESSORY RAILS - Bolt-on MIL-STD 1913 rails give your original MOE handguard plenty of acces-sory mounting versatility. Available in four lengths, so you can position just enough rail area exactly where you need it for each accessory. Clamps easily to the slots in the handguard with the included steel mounting hardware. Also fits many standard plastic handguards with proper center-to-center (c-to-c) hole spacing. Not compatible with MOE M-LOK handguards. SPECS: Reinforced molded polymer, steel hardware, matte black. L2 – 5 slots, 21/2" (6.4cm) long, 1.2" (3.1cm) c-to-c hole spacing. L3 - 7 slots, 31/4" (8.2cm) long, 1.6" (4.1cm) c-to-c hole spacing. L4 - 9 slots, 4" (10.2cm) long, 2.4" (6.1cm) c-to-c hole spacing. L5 - 11 slots, 5" (12.7cm) long, 3.2" (8.2cm) c-to-c hole spacing.#100-005-600AV L2 MOE Rail, 3K4J83 � � � � � � � � � � � � � � � � � $ 5.65#100-005-601AV L3 MOE Rail, 3K5Q65 � � � � � � � � � � � � � � � � 6.60#100-005-602AV L4 MOE Rail, 3K6Q46 � � � � � � � � � � � � � � � � 7.55#100-005-603AV L5 MOE Rail, 3K7E28 � � � � � � � � � � � � � � � � � 8.50

MOE ILLUMINATION KIT - Easy-to-install kit contains everything you need to mount a Picatinny rail-compatible weapon light on an original MOE hand-guard. Gives your rifle the versatility of onboard illumination with minimal sacrifice of handguard real estate. Kit includes a short rail section, optional cantilever rail mount, standard pressure switch mount, a mount for a SureFire® ST pressure switch, and all required hardware. Also fits the handguard of a Bushmaster ACR™ (Adaptive Combat Rifle). SPECS: Reinforced injection-molded polymer, black. Instructions included.#100-005-596AV MOE Illumination Kit, 9Z16D20 � � � � � �$ 18.95

ab

These free-floating handguards are made to offer a range of accessory-attachment options, allowing users to customize their rifle for their own unique needs. Handguard boasts a continuous Picatinny top rail for optics and other accessories, while the seven rows of M-LOK compatible slots lets the user further trick out their rifle. Sling attachment is easy thanks to the two, anti-rotation QD sling swivel sockets. Machined entirely from 6061 aluminum, handguard has an integrated insert in-side the clamping mechanism to prevent overtightening and crack-ing the handguard. For those who don’t want all the “rail estate” of the Combat handguards, the budget friendly Slim Line SLH Hand-guards come with just three rows of M-LOK slots. The incredibly lightweight, professional grade, one-piece G3 Lightweight Hand-guard comes with four rows of M-LOK slots, one five slot Magpul® M-LOK polymer rail section, plus five anti-rotation QD sling swivel sockets. All handguards include a 4140 heat treated barrel nut and installation wrench. Handguards may not fit all billet upper receiver designs. Not for use with gas-piston AR rifles. ab


M-LOK® FREE-FLOAT HANDGUARDS

Easy To Install, Acres of Accessory-Mounting

Real Estate, Won't Rotate, Shift or Come Loose Under Extreme

Conditions

#100-030-223AV Combat HG, 7", 2A135C00 � � � � � � � � � $ 139.95#100-030-224AV Combat HG, 9¼", 2A139A29 � � � � � � � 149.95#100-030-225AV Combat HG, 9½", 2A139E29 � � � � � � � 149.95#100-030-226AV Combat HG, 10½", 2A150I00 � � � � � � � 159.95#100-030-227AV Combat HG, 125/8", 2A166D27 � � � � � � 179.95#100-030-228AV Combat HG, 14", 2A175H12 � � � � � � � � 184.95#100-030-229AV Combat HG, 15", 2A178J56 � � � � � � � � � 189.95#100-030-991AV Slim Line HG, 9¼", 2A128L84 � � � � � � 139.95#100-030-992AV Slim Line HG, 10½", 2A132M98 � � � � � 144.95#100-030-993AV Slim Line HG, 125/8", 2A139G27 � � � � � 149.95#100-030-994AV Slim Line HG, 14", 2A154H95 � � � � � � � 164.95#100-030-995AV Slim Line HG, 15", 2A147E55 � � � � � � � � 159.95#100-031-295AV G3 Lightwght HG, 10½", 2A169G27 � 179.95

With its generous 1.75" in-side diameter, this one-piece, free floating handguard over-

laps your suppressor, giving the rifle a smoother, uninterrupted appearance. Boasting a 2" outside diameter, the handguard offers superb ergonomics without adding any extra bulk. Seven rows of M-LOK compatible slots and a T-marked 1913 Picatinny top rail provide plenty of options for mounting accessories. Handguard is fully dehorned for a comfortable, non-abrasive feel. Comes with one, five slot M-LOK polymer rail section and barrel nut wrench. abSPECS: 6061 aluminum, hardcoat anodized, matte black. 1.75" I.D. (4.4cm), 2" O.D. (5.1cm). Includes proprietary barrel nut, barrel wrench and a polymer five slot M-LOK rail section. Fits standard AR-15 upper receivers. Not for use with piston gas systems. Will not fit some billet uppers due to the tabs on the forend.

MIDWEST INDUSTRIES

SP M-LOK HANDGUARD Overlaps Suppressor For A

Smoother Appearance

#100-019-317AV 7.25" SP Series Handguard , 2A130D41 � � � � � � � � � � � � � � � � � � � � � � � � �$ 139.95

#100-019-318AV 9.25" SP Series Handguard, 2A142K60 � � � � � � � � � � � � � � � � � � � � � � � � � 149.95

#100-019-319AV 10.5" SP Series Handguard, 2A147M22 � � � � � � � � � � � � � � � � � � � � � � � � � 154.95

#100-019-328AV 12.6" SP Series Handguard , 2A156N91 � � � � � � � � � � � � � � � � � � � � � � � � � 164.95

#100-019-329AV 15" SP Series HG, 2A165Q93 � � � � � � � � 174.95

Carbine length, two-piece vented forearm snaps solidly in place and re-places factory plastic handguard with no gunsmithing, no perma-nent alterations to rifle. Each of the four MIL-STD 1913 Picatinny rails contains 15 mounting slots for optics, lasers, vertical grips, bipods, and lights. Two-piece design permits removal of lower section to install a grenade launcher or shotgun. Rails are laser etched with white alphanumeric position markings to aid in fast mounting and remounting of optics and accessories. Four sockets for QD pushbut-ton sling swivels. Models available to fit standard AR-15/M4 carbine with internal clearance for gas piston conversion systems and DPMS Sportical™ AR-style .308 rifle. abSPECS: Machined 6061 billet aluminum, hardcoat anodized, matte black finish. 65/8" (16.8cm) long. AR-15/M4 fits mil-spec 16" carbine-length bar-rels with round front handguard cap. Will not fit Colt-made AR-15/M4. Sportical fits DPMS Sportical AR-style .308 rifle with factory gas block and handguard cap.

MID-LENGTH TWO-PIECE FOREND - Four Picatinny rails contain 20 mounting slots for lasers, optics, bipods, vertical grips, and lights and each MIL-STD rail is USGI type la-ser etched with lettering and numbering. Plenty of internal clearance for an gas piston conversion system. Two-piece design permits removal of lower section for installation of a shotgun or grenade launcher.SPECS: Machined from 6061 billet aluminum, hard coat anodized to Mil-Spec. Black. 81/2" (21.5cm) overall length. Fits carbine length barrels with extended gas system as made by Rock River Arms and Armalite.#100-008-001AV Two-Piece Mid-Length Gen 2

Forend, 2A142E59 � � � � � � � � � � � � � � � � $ 149.95

AR-10® CARBINE FOREND - Snap-on railed forearm gives your ArmaLite AR-10 carbine all the accessory mounting versatility of Midwest Industries two-piece AR-15 forearms. Four MIL-STD 1913 Picatinny rails contain 20 mounting slots each, and are laser etched with white alphanu-meric position markings. Lower section may be left off to provide clearance for a grenade launcher, tear gas launcher, or shotgun. Direct replacement for plastic factory handguard—no gunsmith-ing or permanent alterations required.SPECS: Machined 6061 T6 billet aluminum, hardcoat anodized, matte black. 81/8" (20.6cm), 21/2" (6.4cm) diameter. Fits ArmaLite AR-10 carbines only.#100-004-421AV AR-10 Carbine HG, 2A163M47 � � � � � $ 169.99

MIDWEST INDUSTRIES AR-15/M16/AR-STYLE .308

“GEN 2” TWO-PIECE FORENDSVersatile, Easy To Install, Snap-On

Forend Rails For Optics & Accessories

#100-007-124AV AR-15/M4 Carbine Gen 2 Forend, 2A120J09 � � � � � � � � � � � � � � � � � � � � � � � � $ 124.95

#100-005-396AV DPMS Sportical Forend, 2A140B84 � � 149.99

ab

ab

With a MIL-STD 1913 Picatinny top rail and seven rows of M-LOK slots, this lightweight, one-piece handguard gives you complete choice in accessory-mounting location. Slim, too, with a 1.5" out-side diameter for an exceptionally low profile. No sharp edges to abrade your hand or catch on other gear. Five anti-rotation QD sling swivel sockets. Not for use on gas piston AR-15s. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Barrel nut and barrel nut wrench included.

Narrow Diameter With Multitude Of Accessory

Attachment Points

#100-018-112AV 7" G3 M-Lok Handguard, 2A141C84 � � � � � � � � � � � � � � � � � � � � � � � � $ 149.95

#100-018-114AV 9" G3 M-LOK Handguard, 2A150Q78 � � � � � � � � � � � � � � � � � � � � � � � � 159.95

#100-018-116AV 10.5" G3 M-Lok Handguard, 2A159C22 � � � � � � � � � � � � � � � � � � � � � � � � 169.95

#100-018-118AV 12" G3 M-Lok Handguard, 2A178Q01 � � � � � � � � � � � � � � � � � � � � � � � � 189.95

#100-018-128AV 15" G3 M-Lok HG, 2A189J48 � � � � � � � 199.95


G3 M-SERIES M-LOK FREE-FLOAT HANDGUARDS

Free-float forend system clamps firmly in place without having to re-

move the barrel or front sight. Helps improve accuracy by eliminat-ing stress placed on the barrel by the standard handguard. Simply cut off the delta ring and install the handguard over the barrel nut. Plenty of internal clearance for gas piston conversion systems. Four MIL-STD 1913 Picatinny rails with 15 slots laser-etch T-marked for precise mounting/remounting of accessories. Four sockets for QD pushbutton sling swivels. abSPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black. Mounts over existing barrel nut without removing front sight base. Re-quires removal of Delta ring. Carbine - 7" (17.7cm) long. Fits 16" carbine barrels. Mid Length - 81/2" (21.5cm) overall length. Fits carbine-length bar-rels with extended gas system as made by Rock River Arms and ArmaLite.


“GEN 2” FREE-FLOAT FORENDEliminates Stress On Barrel; Fits

Most Gas Piston Systems

#100-008-588AV Carbine FF Forend, 2A142G60� � � � � � $ 149.95#100-008-891AV Mid-Length FF Forend, 2A161H86 � � 165.00

Extremely lightweight, free floating handguard incorporates Magpul’s M-LOK attachment sys-tem that allows users to add accessory rail sections only where needed. Super slim handguard has a 1.5" outside diameter while the dehorned, non-abrasive finish feels smooth and comfortable in the hand. Hand-guard has five, anti-rotational QD sling swivel sockets plus a 1913 Pica-tinny T-marked top rail for easy positioning optics and accessories. abSPECS: Fits DPMS LR-308 upper receivers and clones; separate models for receivers with Low (.150" high) or High (.210" high) flattop rail tang. 6061 aluminum, hardcoat anodized, black. 1.5" (3.8cm) outside dia. 1.3" (3.3cm) inside dia. Includes proprietary barrel nut, barrel nut wrench, and a five slot Magpul M-LOK rail section.

MIDWEST INDUSTRIES AR-STYLE .308

SS M-LOK HANDGUARDIncreases Your Accessory

Mounting Versatility

#100-016-970AV 12" Low SS M-Lok HG, 2A189E50 � � � � � �$ 199.95#100-016-975AV 15" Low SS M-Lok HG, 2A200E65 � � � � � � 209.95#100-019-332AV 12" High SS M-Lok HG, 2A195D98 � � � � � 209.95#100-019-333AV 15" High SS M-Lok HG, 2A207J75 � � � � � � 219.95

Modular aluminum handguard snaps into place like plastic handguard, with no gunsmithing required. Features T-marked MIL-STD 1913 Picatinny top rail that lines up with flattop uppers for a clean, monolithic look. Includes three sections of moveable poly-mer rail for accessory mounting flexibility. Large ventilation holes help air circulate and keep overall weight down to a half-pound or less, depending on length. Five anti-rotation QD sockets give many sling-mounting options. abSPECS: Machined 6061 T6 aluminum, hardcoat anodized, matte black finish. Handguard – 9" (22.8cm) long, 21/4" (5.7cm) high, 1.8" (4.5cm) wide. 7.2 oz. (204g) wt. 8.3 oz. (235g) wt. with rails. Rails – Hard polymer, black, one 3" (7.3cm) long and two 11/2" (3.8cm) long.


MID-LENGTH SS-SERIES DROP-IN HANDGUARD

Lightweight Two-Piece Handguard Snaps On Easily –

No Mods To Gun

#100-010-892AV SS-Series Mid-Length HG, 2A144P94 � � $ 149.95

Lightweight, slim-line 12" free-float handguard is machined from 6061 aluminum and hardcoat anodized for corrosion protection. Added vent holes along the upper rail allows for enhanced cooling. Handguard features an ergonomic design and is fully dehorned to ensure it has a non-abrasive, com-fortable feel in your hand. Modular design includes three additional 2½" accessory rail sections, one with an anti-rotation QD socket. The full-length, T-marked MIL-STD 1913 top rail offers plenty of space for mounting accessories. Minor gunsmithing required for installation. abSPECS: 6061 aluminum, hardcoat anodized, matte black. 12¾" (32.4cm) OAL. 1.5" (3.8cm) I.D. 1.75" (4.4cm) O.D. 12.4 oz. (351.5g) wt. Includes three accessory rail sections, barrel nut, nut wrench, bi-pod stud, and instruc-tions. DPMS Low fits llater-model (after August 2009) LR-308s with flattop rail that extends .150" above receiver. DPMS High fits older LR-308 rifles with flattop rail that extends .210" above the top of the receiver.

MIDWEST INDUSTRIES AR-STYLE .308

SS SERIES FREE-FLOAT HANDGUARDSlim Profile, Fits

Comfortably In The Hand, Plenty Of Accessory Options

#100-011-912AV AR-308 SS Handguard, Armalite® AR-10®/Rock River Arms, 2A178E11 � � � � � � �$ 184.99

#100-011-914AV AR-308 SS HG, DPMS Low, 2A178K11 � � 184.99#100-011-913AV AR-308 SS HG, DPMS High, 2A178F11 � � 184.99

AR

-15

/M16


SINCE 1939

HA

ND

GU

AR

DS

Odin's O2 Lite modular M-LOK handguard lives up to its name with an unusually open framework that adds the bare minimum of weight to your rifle yet is strong and rigid. It free-floats the barrel, and it's ready for you to install M-LOK rails and direct-attach accessories in the 3, 6 and 9 o'clock positions. There are lengths of Picatinny rail on top at the front and rear of the 'guard, further saving weight and making the O2 Lite unusually comfortable in the hand. QD sling pushbutton swivel sockets are at the 3 and 9 o'clock positions at the rear. Made of extruded 6005 T651 aluminum-magnesium-silicon alloy that is exceptionally lightweight yet strong. Steel barrel nut and ALL other mounting and timing hardware is included (except for a 1¼" wrench - who doesn't have one of those?), making installation the simplest and fastest in the industry. Fits mil-spec AR-15 uppers and most billet uppers. One 5-slot accessory rail included. 1.9" O.D., 1.6" I.D. clearance for gas block. ab

ODIN WORKS AR-15 O2 LITE FREE-FLOAT M-LOK HANDGUARD

Minimal Weight, Maximum Accessory

Placement Options & A Very Distinct Appearance

#100-022-674AV AR-15 O2 Lite Free Float Forend 9.5" M-LOK Black, 4A167Q48 � � � � � � � � � � $ 180.50

#100-022-675AV AR-15 O2 Lite Free Float Forend 12.5" M-LOK Black, 4A176E30 � � � � � � � � � � � 190.00

#100-022-676AV AR-15 O2 Lite Free Float Forend 15.5" M-LOK Black, 4A189I52 � � � � � � � � � � � 204.25

Tubular free-float fore-arm is made of lightweight, high-strength carbon fiber to reduce heat transfer to the shooter’s hand during sustained fire and provide excellent handling characteristics. Has 28 cooling ports, three 31/2" Picatinny rails that can be repositioned for specific needs, and an 81/2" top rail. Precision-made, aluminum barrel nut rigidly clamps the forearm to the upper receiver. Generous porting on enhances heat transfer while reducing weight even more. Fits rifle-length AR-15/M16 gas system. abSPECS: Tube – Carbon fiber, natural black/silver finish. 91/8" (23.2cm) long. 2" (5cm) O.D. Barrel nut – Aluminum, hard-anodized, matte black.

PRECISION REFLEX AR-15/M16/AR-STYLE .308

GEN III CARBON FIBER FOREARMImproves Handling & Reduces Heat Buildup

#714-000-011AV Gen III Forearm, 9.5", 4A298J19 � � � � �$ 327.99

Two-piece steel tube isolates barrel from

forend pressure for consistent accuracy on target and tactical rifles. Lets you use a tight shooting sling or a bipod without putting exter-nal pressure on barrel and shifting point of impact. Furnished with A2 handguards, sling swivel and gas tube. DCM legal, does not alter exterior profile. abSPECS: Steel, parkerized finish. High-temp injection-molded handguards, black. 13" (33cm) long. 16 oz. (454 g) weight. Fits AR 15 with 20" barrel.


NM FREE FLOAT BARREL SLEEVEDCM Legal, A2-Style

Relieves Barrel Tension For Better Accuracy

#739-000-003AV Free Float Barrel Sleeve, 9C107G28 � � � � � � � � � � � � � � � � � � � � � � � � $ 120.99

The Gen III Delta free-float forend has a triangular cross-section that makes it more comfortable to grasp than many conventional 4-rail handguards, with a flat bottom that’s ideal for shooting from a rest or sandbags. The Delta has the same carbon fiber construction as the standard Gen III to keep the weight down without sacrificing strength. Extra clearance inside, at the top, makes it compatible with most gas piston systems and conversions. An 81/2" top rail plus three user-config-urable 31/2" rails side and bottom rails give plenty of room for mounting a bipod, light, and other accessories. Kit includes the forearm, barrel nut, bolt-on accessory rails, and complete installation instructions. abSPECS: Tube – Carbon fiber, black finish. 121/2" long 21/8" wide, 21/4" high. Barrel Nut – Aluminum, hardcoat anodized, matte black. AR15/M16 fits standard mil-spec upper receiver. 16 oz. wt. AR-308 fits DPMS LR-308 and clones based on it. 1.2 lbs. wt.#714-000-021AV AR-15/M16 Delta Forearm, 4A287P74 � � $ 350.99#714-000-022AV AR-308 Delta Forearm, 4A287F74 � � 343.99

PRECISION REFLEX AR-15/AR-STYLE .308

GEN III DELTA CARBON FIBER FOREARM

Lightweight Free-Float Handguard Is Comfortable To

Handle & Gas Piston Compatible

The NOXs™ handguard was designed as an alternative to the outdated, bulky options of the past. Engineered as a lightweight, ultra-thin platform, the NOXs™ handguard is only 1.5” wide. Each NOXs™ handguard will be available with the KeyMod mounting sys-tem at the 3, 6 and 9 o’clock positions throughout the length of the rail, allowing the user to customize their platform with accessories as needed. Anti-rotation QD sling attachment points are milled directly into the hand guard, as are cooling slots, providing maximum airflow and preventing the barrel from overheating during prolonged peri-ods of shooting. The NOXs™ handguard comes equipped the Cross-lok™ mounting system. This system ensures that anti-rotation is built into the steel barrel nut as well as the handguard making installation simple and rock solid with just basic hand tools. As with all Seekins Precision handguards the NOXs™ ships with all of the needed hard-ware to mount to a standard upper receiver. abSPECS: Aluminum construction, Type III hardcoat anodized, matte black. Available in 12.8" AND 15" lengths for the AR-15 platform. 1.50" O.D. 1.350" I.D.


NOXS HANDGUARDUltra-Low Profile, Yet With

Plenty of Accessory-Mounting Flexibility - Lightweight, Too

#100-018-836AV NOXS HG, Keymod, 12", 8C151G43 � � $ 160.00#100-018-837AV NOXS HG, Keymod, 15", 8C161Q55 � � 170.00#100-018-839AV NOXS HG, M-LOK, 12", 8C151N43 � � 160.00#100-018-840AV NOXS HG, M-LOK, 15", 8C161D55 � � 170.00

Troy's robust, Picatinny quad-railed handguard is a direct, drop-in replace-

ment for the plastic military-type carbine handguard. It provides the accessory mounting benefits of a tactical ‘guard without the removal of the delta ring or changing of the barrel nut. Secure clamping two-piece design installs in minutes and gives a rock-solid mount for optics, vertical grips, laser, and all the other acces-sories commonly mounted up front on an AR. Four positions for 360° pushbutton sling swivels; numbered cross slots. Removable bottom rail allows installation on rifles equipped with M203 Grenade Launcher, including the Brownells M203 37mm Launcher. Rugged machined 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte black finish. As long as you don’t need to free-float the barrel, this is an excellent drop-in upgrade. ab


MRF-DI CARBINE HANDGUARDQuick Drop-In Replacement for

Military Plastic Carbine Handguard

#100-003-459AV 7" Standard MRF-DI, 3B128E47 � � � � � $ 136.99

Lightweight, vented handguards allow the shooter to choose fixed, permanent Picatinny rails or easily removable ones for high-level customization. Precision machined from aircraft grade alu-minum, then mil-spec hardcoat anodized for extra strength and superior abrasion resistance. ab

#100-002-084AV Threaded Swivel Stud, 9A3M80 � � � � � � $ 4.99#100-002-087AV Dovetail Sling Mount, 9A18L00� � � � � � � 19.99

FOREARM END CAP - Screws into the front of any Yankee Hill free-float handguard to provide added protection for the end of the forearm. Hides view of the barrel from the front of the handguard for a clean, finished look, and keeps large debris out. Cooling ports allow rapid escape of barrel heat and promote airflow under the handguard. Available with 15/16" or 11/16" inside di-ameter. Install using supplied threadlocker.SPECS: Aluminum, mil-spec hardcoat anodized, matte black. 15/16" (2.4cm) I.D. or 11/16" (2.7cm) I.D.#100-002-897AV AR-15 Forearm End Cap 15/16" ID,

9A14D79 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 16.99#100-002-086AV 11/16" I.D. End Cap, 9A14J70 � � � � � � � � � 16.99

FOREARM WRENCH - Heavy, steel, spanner wrench makes it easy to tighten handguard barrel nuts to the correct torque. Notched end engages the indexing ring on Yankee Hill handguards and others with similar, slotted indexing rings for aligning the accessory rails.SPECS: Steel, black oxide finish. 8" (20.3cm) long, 2" (5.1cm) wide, 1/4" (6.4mm) thick.#100-002-090AV Forearm Wrench, 9A28I93 � � � � � � � � � � $ 33.75

DIAMOND-PATTERN FREE-FLOAT HANDGUARD - Diamond-shaped vents in a unique, latticework pat-tern give your weapon a distinctive look and provide superb airflow to prevent bar-rel from overheating. Helps keep your hand cool, too, while reducing weapon’s overall weight. Provides four, full-length Picatinny rails for maximum flexibility in mounting tactical accessories. Four, full-length Pica-tinny rails provide maximum flexibility in mounting tactical accessories. Machined from high-grade 6061 T6 aluminum and mil-spec hardcoat an-odized to withstand combat and heavy-duty usage. Extended top rail gives a gap-free fit to receiver rail. Slots are marked alpha-numerically to help identify accessory locations. Threaded front end accepts Yankee Hill screw-in end cap, available separately. Comes with jam nut, barrel nut and anti-rotation screws to ensure handguard stays locked in place.SPECS: 6061 T6 aluminum, mil-spec hardcoat anodized, matte black. Carbine – 71/4" (23.5cm) OAL, 21/2" (6.4cm) dia. 12.5 oz. (354g) weight. Fits AR-15/M16 with carbine-length gas system. Mid-Length – 91/4" (23.5cm) OAL, 21/2" dia. 15.2 oz. (431g) wt. Fits AR-15/M16 with mid-length gas sys-tem. Specter – 93/4" (24.8cm) OAL, 21/2" dia. 16.1 oz. (456g) wt. Fits AR-15/M16 with carbine-length gas system and covers gas block when installed. Rifle – 121/2" (31.8cm) OAL, 21/2" dia. 16.6 oz. (471g) wt. Fits AR-15/M16 with rifle-length gas system.#100-004-311AV Diamond HG, Carbine, 9A100I90 � � $ 110.99#100-004-312AV Diamond HG, Mid-Lgth, 9A116J80 � � 125.99#100-004-313AV Diamond HG, Specter, 9A113E97 � � 121.99#100-004-314AV Diamond HG, Rifle, 9A140M40 � � � 158.99

2-PIECE CARBINE HANDGUARD - Tough, 2-piece, forearm uses your existing delta ring, so it’s easy to replace the standard issue, mil-spec handguard with a strong, lightweight aluminum version. Four, fixed, Picatinny rails provide a solid mounting platform for backup sights, lasers, tacti-cal lights, vertical grips and more. Oversize cooling ports prevent heat buildup and allow clear view of the barrel section underneath for a radical, tactical look. Bottom panel removes easily to provide clearance for grenade and flare launchers if needed. Drilled and tapped in four locations to accept the Yankee Hill Threaded Swivel Stud. Use Colt model on Colt-manufactured guns.SPECS: Aluminum, mil-spec hardcoat anodized, matte black. 65/8" (16.8cm) long x 23/8" (6cm) wide. 9.9 oz. (281 g) wt. Colt Carbine model fits Colt-manufactured guns only. Standard model fits carbines made by most other manufacturers. #100-002-093AV Carbine 2-Pc HG, 9A113K70� � � � � � $ 124.99#100-003-122AV Colt Carbine 2-Pc HG, 9A113H70 � � 133.99

TACTICAL SWIVEL MOUNTS - Steel, swivel stud features a full, 360 degrees of rotation to allow your tactical sling to follow the movements of your body, not just the rifle. Virtually eliminates sling tangle. Accepts standard, quick-detach type swivels. Threaded Swivel Stud is a 5/16"-32 tpi pivoting stud. Fits Yankee Hill drilled and tapped handguards. Add-on to other applications with at least 1/4" depth clearance. Dovetail Sling Mount - Threaded Swivel Stud (above), combined with an aluminum dovetail clamp and steel cross-bolt. Secures directly to any Picatinny or Weaver-style rail.SPECS: Threaded Swivel Stud - Steel, blued finish. 5/16"-32 tpi. Approx. 3/4" (1.9cm) OAL, requires 1/4" (6.4mm) depth clearance for drill/tap ap-plications. Dovetail Sling Mount - Steel stud, blued; aluminum clamp, matte black mil-spec hardcoat finish. Approx. 11/4" (3.2cm) wide x 11/4" high.


TACTICAL HANDGUARDSFixed Or Removable Rail Models For Extreme Tactical Duty

AR-15 handguards have come a long way since that first, somewhat fragile fiberglass 'guard on the early M16 rifles. But even with all the ergo-nomically enhanced, Picatinny-railed, M-LOK'd up, free-float tactical handguards to choose from, some folks still find the simple, snap-on military parts are all they need. These compo-nents will add an extra touch of period detail to any "retro repro" rifle build using Brownells Retro parts. So here's the steel hardware you need up front, just behind the gas block, for mounting standard military style handguards. Handguard caps are all stamped steel with a durable satin black oxide finish. AR-15 Round Cap is correct part for all standard AR-15 rifles with .750" barrel

diameter at the gas port. (Has the two small indents on the side.) M4 Cap specifically fits military M4-pattern barrels with .750" O.D. at the gas port. It has the M203 side cutouts for use with mil-spec handguards. Old-Style Triangular Cap accepts both old triangle cross-section rifle handguards and the later, round, A2-pattern plastic handguards. Correct part to use with your Brownells Retro AR-15/M16 handguard on a "retro repro" rifle build. Slip Spring aka "Weld Spring" fits Colt AR-15 rifles and carbines and clones thereof and is the original factory "compression" assembly made of several component parts joined together permanently at the factory. Just the spring, nothing else. Front Swivel fits all AR-15 rifles and carbines equipped with a front sight tower. This is the original military-style swivel of Parkerized steel, with a rubber coating on the loop itself, that pivots pivots on a rivet (not included, sold separately below). ab

LUTH-AR AR-15/M16

HANDGUARD CAPS & PARTSSmall Parts You Need to Keep Classic Military

Style 'Guards in Place

#100-028-051AV AR-15 Round Handguard Cap, 3D2P44 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 3.47

#100-028-053AV M4 Handguard Cap, 3D2L44 � � � � � � � � � � 3.47#100-028-052AV Old-Style Triangular Handguard Cap,

3D2L44 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 3.47#100-028-049AV AR-15 Slip Spring, 3D4G90 � � � � � � � � � � � 6.57#100-028-050AV AR-15 Front Swivel, 3D3B12� � � � � � � � � � � 3.75#160-301-051AV AR-15 Front Sling Swivel Rivet ONLY,

6A3B99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.89

AR

-15/M

16


brownells.com

HA

ND

GU

AR

DS

Original factory parts to re-place damaged or lost pieces for your Yankee Hill free-float forearm. Barrel nut is compatible with any standard AR-15 or M16 receiver. Both parts are designed to work with Yankee Hill forearms only. abSPECS: Barrel Nut – aluminum, hardcoat anodized, matte black. Jam Nut – steel, black oxide finish. Fit Yankee Hill free-float forearms only.

YANKEE HILL MACHINE AR-15

FOREND BARREL NUT & JAM NUTThe Correct Parts For All

Yankee Hill Free-Float Forearms

#100-009-657AV YHM-9483 Barrel Nut, 9A25Q69 � � � � $ 28.99#100-009-658AV YHM-9433 Jam Nut, 9A12D19 � � � � � � 15.79

Tough, polymer cover slides over Picatinny rails to protect shooter’s hand from sharp edges of unused rails, and shield ex-posed rails from damage during rough tactical operations. Makes rail less likely to snag clothing and equipment and gives the rounded contour of a smooth, circular handguard with the freedom to re-configure accessories whenever you need to. Rubber-like, pebble-texture grip surface helps shooter maintain better weapon con-trol. Each panel covers 15 rail slots—the correct length to fit many carbine-length handguards without modification. Pre-segmented construction for ease in cutting to length to custom fit on other handguards. Multiple sections can be mounted one after the other for smooth, visually continuous cover on longer handguards. abSPECS: Synthetic polymer, pebble finish, in Black, Flat Dark Earth (FDE), and O.D. Green (ODG). 61/4" (15.9cm) long x 13/8" (3.5cm) wide. Fits Pica-tinny accessory rails. Covers 15 rail slots.

MAGPUL AR-15/M16

ACCESSORY RAIL COVERImproves Grip, Protects Rails

From Damage

#100-003-074AV AR-15 Rail Cover, Black, 3K9I71 � � � � � � � $ 11.35#100-019-334AV AR-15 Rail Cover, FDE, 3K9L71 � � � � � � � 11.35#100-019-335AV AR-15 Rail Cover, ODG, 3K9L71 � � � � � � 11.35

Heat-resistant rubber rail covers quickly snap into the circular cooling holes on Troy modular rail-and-chassis systems to provide you with a extra-comfortable, greatly improved grip while keeping added bulk to an absolute minimum. Each cover fills 6 holes and may be cut down to shorter lengths or installed end-to-end for longer lengths. abSPECS: Heat-resistant rubber, black. One strip measures 4.5" (11.4cm) long. Fits Troy TRX-Extreme, Alpha, and Delta rails. 7 strips per pak.


SQUID GRIP RAIL COVERSImproves Your Hold On A Troy

Modular Railed Handguard

#100-010-793AV Squid Grip Rail Covers, 7-Pak, 3B21C50 � � $ 24.99

Flexible ladder-style pan-el snaps securely into unused cross slots on Picatinny rails, protecting against dirt and

dings and improving grip and weapon control. Prevents sharp rail edges from digging into your hand, snagging on clothing, and causing damage to gear, like cut and frayed slings or repelling ropes. Made of rubbery, slip-resistant Santoprene™ thermoplastic elasto-mer, the ultra-low-profile design keeps your handguard diameter slim. Covers 18 slots or can easily be trimmed to custom lengths and fitted between mounted accessories. To remove, simply pry up a corner and peel off. Manufactured by Falcon Industries. abSPECS: Santoprene rubber. 615/16" (17.6cm) long. Fits one side of standard carbine-length 1913 Picatinny rail.

MAGPUL

LADDER RAIL PANELPress Into Empty Cross

Slots For Enhanced Grip & Rail Protection

#100-015-128AV Ladder Rail Panel, Black, 3K9Q71 � � � � � $ 11.35#100-015-129AV Ladder Rail Panel, O.D. Green,

3K9E71 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11.35#100-015-130AV Ladder Rail Panel, Flat Dark Earth,

3K9J71 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11.35

Molded polymer cover slides over any Pica-tinny handguard rail to provide a comfortable, se-

cure grasping surface. Protects the hand from sharp rail edges and barrel heat during long shooting sessions. Molded-in knurled bands enhance your grip, especially when hand is wet, and match the Troy Modular Combat Grip to give your rifle a neat, unified appearance. No struggling to stretch the cover over the rail: simply hold up the retaining clip, slide on rail, and close the positive-locking clip to keep the cover firmly in place. abSPECS: Polymer, black. 61/8" (15. 6cm) long, 17/16" (2.6cm) wide. Sold in 3-paks.


BATTLE RAIL COVERSProtects Hand & Rail From Heat & Abrasion;

Easy Slide-On Installation

#100-011-035AV Rail Covers, 3-Pak, 3B17G80 � � � � � � � � $ 20.99

Combining the ben-efits of a hand stop and a vertical grip, the Shift gives you plenty of “meat” to gr-ab onto and pull the stock tight against your shoulder for better muzzle control. The angled design provides a more er-gonomic gripping area that won’t cause your fingers to bunch up. A deep notch in the front gives you a solid anchor point for your little or index finger when using the grip as a handstop. Skeletonized frame saves weight without sacrificing strength and permits air to flow around your palm. The hybrid design of the Shift Vertical Grip allows the operator to use it as a full-on vertical grip or as a comfort-able hand stop when going with the thumb over method. Shift Short Angled Grip makes an ideal handstop or can be pressed against a barrier for added stability when shooting from concealment. abSPECS: 6061 T-6 aluminum, hard coat anodized, matte black. Short Angled Grip – 1.7" (4.3cm) high. 2.5 oz. (70.8g) wt. Vertical Grip – 3.3" (8.4cm) high. 3.4 oz. (96.4g) wt.

FORTIS MANUFACTURING

AR-15/M-16 SHIFT GRIPGives You More Positive Control

Of The Rifle

#100-020-603AV Shift Short Angled Grip, Picatinny, 4Z64J96 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 66.45

#100-020-604AV Shift Short Angled Grip, KeyMod, 4Z64M96 � � � � � � � � � � � � � � � � � � � � � � � � � � 66.45

#100-020-605AV Shift Short Angled Grip, MLOK, 4Z64G96 � � � � � � � � � � � � � � � � � � � � � � � � � � 66.45

#100-020-606AV Shift Vertical Grip, Picatinny, 4Z74A24 � � � � � � � � � � � � � � � � � � � � � � � � � � 75.95

#100-020-607AV Shift Vertical Grip, Keymod, 4Z74A24 � � � � � � � � � � � � � � � � � � � � � � � � � � 75.95

#100-020-608AV Shift Vertical Grip, MLOK, 4Z74I24 � � � 75.95

During competition or a tactical situation, you can’t afford to lose time fumbling to position your hand on the forearm, or, worse yet, have it slide off when racking a pump action shotgun. This rubber-coated, ergonomically shaped handstop attaches to any Picatinny rail forend to provide precise, tactile indexing of the sup-port hand, so you keep your eyes on the target while mounting the weapon. Helps keep hand in position during recoil, too, for fast follow-up shots. Dual cross-bolts clamp the stop tightly to the rail for a solid, movement-free installation. abSPECS: Synthetic-rubber coated molded polymer, black. Steel cross-bolts, oxide finish, matte black. 1¼" long x 1¼" wide at base. Extends 1¾" (4.5cm) below rail.

FALCON INDUSTRIES ERGO GRIP® SURESTOP HANDSTOPFast, Precise, Tactile Hand Placement

On Railed Forends

#573-000-052AV SureStop Rail Handstop, 3G8F86 � � � � $ 11.75

Low-profile, two-piece panels snap easily onto any Picatinny rail, no need to re-move existing mounts. The heat-absorbing polymer shields your hand from barrel heat,

while the aggressive, anti-slip texture gives you positive control of your rifle. Panels are reinforced in high stress areas to ensure they stay put during hard use. Interior clips on either side of the panels allow you to keep light or laser wires tucked securely in place. abSPECS: Molded polymer, Black, Flat Dark Earth, O.D. Green, or Stealth Gray. 6 3/8" (16.2cm) OAL, 1 1/2" (3.8cm) wide, when assembled. Fits 1913 Picatinny rails.

MAGPUL XTM™ ENHANCED RAIL PANELSProtect You & Your Gear From Sharp Rail Edges

#100-009-571AV Enhanced Rail Panels, Blk, 3K6M30 � � � � $ 7.55#100-009-572AV Enhanced Rail Panels, FDE , 3K6Q30 � � � 7.55#100-009-573AV Enhanced Rail Panels, ODG, 3K6I30 � � � 7.55#100-014-463AV Enhanced Rail Panels, Gray, 3K6H30 � � � 7.55

Improve your weapon control with this lightweight, low-profile XTM hand stop kit. Index point lets shooter pull the rifle tighter against the shoulder for better muzzle con-trol and consistent rifle presentation. Forward stop prevents shooter’s support hand from reaching past the handguard and coming in contact with the hot muzzle or front sight as-sembly. Enhanced XTM panels fea-ture an aggressive anti-slip texture. Fits any Picatinny rail and can be con-figured to the shooter’s preference. Comes with all necessary mounting hardware and instructions. ab

SPECS: Molded polymer, Black, Flat Dark Earth, O.D. Green, or Stealth Gray. Kit contains 1 hand stop, 1 index panel, 1 full XTM enhanced panel, 1 XTM enhanced half panel. 5 1/2" (13.9cm) combined OAL, 1 1/2" (3.8cm) wide, 1 3/8" (3.5cm) high. Fits Picatinny rails. Includes mounting hardware and instructions.

Provides A Consistent Index Point & Prevents Support Hand From

Reaching Past Handguard

#100-009-593AV Hand Stop Kit, Black, 3K17J43 � � � � � � � �$ 18.95#100-009-594AV Hand Stop Kit, Flat Dark Earth,

3K17G43 � � � � � � � � � � � � � � � � � � � � � � � � � � � 18.95#100-009-595AV Hand Stop Kit, O.D. Green, 3K17G43 � � 18.95#100-014-465AV Hand Stop Kit, Stealth Gray,

3K17G43 � � � � � � � � � � � � � � � � � � � � � � � � � � � 18.95

MAGPUL

XTM™ HAND STOP KIT

Low-profile hand stop compo-nents easily snap into standard M-LOK slots to provide a tactile index point for better weapon control. Forward stop further enhances control by keeping the shooter's hand from sliding off the hand-guard and getting burned on a hot gas block or barrel. Aggressive TSP texturing further secures the shooter's control of the rifle. Kit includes one M-LOK Hand Stop, one M-LOK Index Panel, and one M-LOK Type 2 Rail Cover, plus one adapter to enable instal-lation on Magpul polymer M-LOK Hand Guards or other forends with wide-profile rails. Lightweight molded polymer. Colors: Black, Flat Dark Earth (FDE), O.D. Green (ODG), and Stealth Gray. ab

MAGPUL M-LOKTM HANDSTOP KITPositions Shooter's Hand On Forend

To Improve Weapon Control

#100-017-435AV M-LOK Handstop Kit, Blk, 3K21Q80 � � � � $ 23.70#100-017-437AV M-LOK Handstop Kit, FDE, 3K21M80 � � � 23.70#100-017-440AV M-LOK Handstop Kit, ODG, 3K21J80 � � 23.70#100-017-438AV M-LOK Handstop Kit, Gray, 3K21K80 � � � 23.70

Minimal-profile rail covers snap directly onto any handguard with slots to provide a comfortable, enhanced

grasping surface. Lightweight, flexible polymer rubber is extremely heat resistant to protect the hand. Omni-directional design means no required up/down, left/right or front/back orientation, so easy to install quickly. Each cover is 9.5" long and covers six full M-LOK slots. Easy to cut for a customized installation. Available in standard Magpul colors: Black, Flat Dark Earth (FDE), O.D. Green (ODG), and Stealth Gray. Two (2) rails per pack. ab

MAGPUL

M-LOKTM RAIL COVER, TYPE 1Easily Snaps Onto Any

M-LOK Compatible Handguard

#100-017-431AV Type 1 M-LOK Rail Cover, Black, 3K13Q28 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 15.15

#100-017-432AV Type 1 M-LOK Rail Cover, FDE, 3K13P28 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.15

#100-017-434AV Type 1 M-LOK Rail Cover, ODG, 3K13K28 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.15

#100-017-433AV Type 1 M-LOK Rail Cover, Gray, 3K13I28 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.15

Polymer rail covers snap into M-LOK mount-ing slots and protect them from impact damage, while keeping them from accidentally snagging on gear or vegetation. Also adds a textured grasp-ing surface to the handguard. Adds slightly more than 1/8" thickness to surface - so minimal bulk. Locking tab is pre-scored to allow user to snap off sections and mix and match colors as desired. Each panel covers one M-LOK slot. 6 panels per pak. ab

MAGPUL AR-15/M16

M-LOKTM TYPE 2 RAIL COVERProtects Unused M-LOK Points & Adds

Grippy Grasping Surface

#100-016-545AV M-LOK Rail Cover Type 2, Black, 3K10B58 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 12.30

#100-016-546AV M-LOK Rail Cover Type 2, FDE, 3K10K58� � � � � � � � � � � � � � � � � � � � � � � � � � � 12.30

#100-016-547AV M-LOK Rail Cover Type 2, Gray, 3K10K58� � � � � � � � � � � � � � � � � � � � � � � � � � � 12.30

#100-016-548AV M-LOK Rail Cover Type 2, ODG, 3K10P58� � � � � � � � � � � � � � � � � � � � � � � � � � � 12.30

AR

-15

/M16


SINCE 1939

PIS

TO

L G

RIP

S

Developed with input from combat veter-ans, this lightweight, low-profile grip helps the operator maintain greater control of the rifle regardless of firing position. Helps the shooter achieve a comfortable grip, with a natural placement of the fingers, a pronounced hand stop at the rear, and an anti-slip textured surface that keeps the hand in place, even when wet. The ridged front face lets the shooter brace the rifle against barricades, ledges, or other available support surfaces, creating a dependable shooting platform without worrying about slippage. Mounts easily and securely to Picatinny handguard rail with a super-stable, wobble-free, friction lock. Minimal bulk: extends only 1" below handguard. Molded hard polymer construction delivers strength without a weight penalty.SPECS: Molded, reinforced, impact-resistant hard polymer, matte black or FDE. 41/4" (10.8cm) OAL. 1.7 oz. (48.1g) wt. Extends approximately 1" (2.5cm) below rail.

STRIKE INDUSTRIES AR-15/M16

COBRA TACTICAL FORE GRIPLow-Profile, Ergonomically-Enhanced

Grip Increases Weapon Control

#100-011-008AV Cobra Tactical Fore Grip, Black, 2H20E00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 20.00

#100-011-871AV Cobra Tactical Fore Grip, FDE, 2H20P00 � � � � � � � � � � � � � � � � � � � � � � � � � � 20.00

Machined aluminum support clamps to any Picatinny handguard rail and has aggressive teeth that bite into barricades, doorframes, and other obstacles. Helps the shooter effectively

brace the weapon against a structure for a rock-solid shooting posi-tion. Pushing the teeth against the barricade anchors the gun and prevents slipping for accurate follow-up shots in situations where a stable position might not otherwise be possible. Rear-facing hook on the back also allows you to pull the rifle into a barricade for better control with the heavier-recoiling of 7.62mm (.308) rifles. Clamps to any Picatinny rail with a low-profile cross-bolt. abSPECS: Aluminum, hardcoat anodized, black. 11/4" (3.1cm) long, 11/2" (3.8cm) wide, 15/32" (2.9cm) high. 1.1 oz. (31.7g) weight.

NOVESKE AR-15/M16/AR-STYLE .308

K9 BARRICADE SUPPORT 7.62Stabilizes Weapon

When Shooting Behind Barricades

#100-006-819AV K9 Barricade Support 7.62, 1A59A39 � �$ 62.99

HA

ND

GU

AR

DS

Reduced angle, ergonomically en-hanced grips are designed to improve rifle control for shooters preferring the “squared off” stance. Constructed of durable, impact-

resistant polymer, they feature a texturized surface for a sure-hold and a water-resistant, hinged door that opens to reveal a small compartment for storing batteries or other small items. Two inter-changeable modular triggerguard inserts (smooth and extended) may be used to close the gap between the triggerguard and grip depending on your preference; inserts also work well on rifles with larger triggerguards. MOD-0 model is similar in size to the standard A1/A2-style grip. MOD-1 model features a high-rise back strap to fill the grip-to-receiver gap. MOD-2 is a 1/4" wider than MOD-0/1 for a more hand-filling grip, plus it adds three interchangeable backstrap pieces that let you customize the grip to your hand and your rifle’s receiver. MOD-3 is a non-modular grip with a fixed triggerguard tab and a contour that combines the extra width of the MOD-2 with the extended beavertail of the MOD-1. abSPECS: Impact resistant polymer, Black or Flat Dark Earth (FDE). All mod-els approx. 41/4" (10.8cm) high. Mounting hardware included. Fits rifles that accept standard A2-type AR-15/M16 pistol grip.


GUNFIGHTER GRIPFor Maximum Control In Modern

Gunfighting Stances

MOD-0 in Black

#100-009-900AV MOD-0 Gunfighter Grip, Blk, 1E24P82 � �$ 25.99#100-009-901AV MOD-0 Gunfighter Grip, FDE,

1E24J82 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 25.99#100-009-904AV MOD-1 Gunfighter Grip, Blk, 1E24C82 � � 25.99#100-009-906AV MOD-1 Gunfighter Grip, FDE,

1E24N82 � � � � � � � � � � � � � � � � � � � � � � � � � � � 25.99#100-014-276AV MOD-2 Gunfighter Grip, Blk, 1E28G63 � � 29.99#100-014-277AV MOD-2 Gunfighter Grip, FDE,

1E28F63 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 29.99#100-013-641AV MOD-3 Gunfighter Grip, Blk, 1E17A18 � � 17.99#100-013-642AV MOD-3 Gunfighter Grip, FDE,

1E17B18 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17.99

MOD-1 in Flat Dark Earth

Weighing just a tad under 2 oz. (including its Titanium screw), this reinforced carbon fiber pistol grip is so lightweight, it’s barely noticeable - even on the lightest carbine builds. Designed to fit of your hand’s natural contours, the grip supports your entire palm, not just the web be-tween thumb and index finger, meaning you

can maintain a consistent hold for repeatable trigger pulls. Com-fortable surface that won’t leave you with a sore hand after for those long days at the range. Molded grip provides rigidity and style, with no milled or trimmed edges that could splinter or wear over time, plus it will fit a wide range of hand sizes. The included a self-adhesive "grip strip" can be attached to the back strap for extra traction. ab

BRIGAND ARMS AR-15/M16

CARBON BLACK PISTOL GRIPSuperior Ergonomic Shape Feels Like It Was

Made To Fit Your Hand

#100-027-944AV Carbon Black Pistol Grip, 3K84M86 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.10

Provides a comfortable hold for those who prefer the straight, uncluttered lines of the standard A2-style grip. Extremely rigid and du-rable with hand-filling contours and molded-in ledges that lock your hand into position. Avail-able in black only abSPECS: Polymer. 4" (10.2cm) high, 2" (5.1cm) wide, 17/32" (3.1cm) thick. Fits both rifle and carbine.

CAVALRY ARMS AR-15/M16

A2-STYLE GRIPProven, Mil-Spec A2 Design

#100-002-830AV A2-Style Pistol Grip, Black, 2K5A58 � � � � $ 7.39

Based on the classic 1911 grip angle, with its natu-ral hand positioning, this ergonomic pistol grip fea-tures soft-touch, rubberized overmolding for com-

fort and enhanced wet or dry grasp. Integral triggerguard is over-sized to easily accommodate gloved hands and neatly fills the gap between the grip and lower receiver. No roll pin required, reducing risk of scratching or damaging lower receiver during installation. abSPECS: Polymer, black or military brown. 4.25" (10.8cm) tall, 2" (5.1cm) wide, 1.4" (3.5cm) thick. 3.2 oz. (90.7g) wt. Includes screw and washer.#100-015-027AV Pistol Grip, Black, 8K28B00 � � � � � � � � � $ 28.00#100-015-028AV Pistol Grip, Brown, 8K28G00 � � � � � � � � 28.00

Gives Enhanced Ergonomic Comfort & Weapon Control


PISTOL GRIP

Precisely molded, upswept grip extension and non-slip, pebble-grain finish give a solid, hand filling

grip for comfortable weapon handling and faster follow-up shots. Adjustable palm rest gives exact fit to your hand, ensures correct hand placement for excellent trigger control. Features a dual palm swell, with right thumb rest and finger grooves to improve grasp. abSPECS: High impact polyurethane, black, matte finish. 5" (12.7cm) long. Palm shelf: 43/8" (11.11cm) long, 25/8" (6.67cm) wide, 1" (2.5cm) thick.

DPMS AR-15/M16

PANTHER TACTICAL PALM GRIP

Hand Filling, Improves Trigger Control, Shooting Comfort

#231-000-034AV Panther Palm Grip, 1C31Q55 � � � � � � � � $ 41.99

Hand-filling, tactical pistol grips offer an ergonomic profile with finger grooves, palm swells, and many other features to improve shooting comfort and accuracy. SureGrip has a hard polymer core overmolded with soft rubber for a superior grip and added cushion. Rigid grip features Rhino Hide™, a hard, non-slip textured finish molded directly into the polymer. ab

STANDARD - Slightly thinner than the factory grip but with additional depth front to back. Pebble grain, non-slip surface and subtle finger grooves improve grasp and promote correct trigger finger position. Curved rear backstrap fills web of hand. Ambidex-trous (Amb.) model has a rigid surface texture. RH SureGrip model has a distinct thumb shelf for right-handed shooters. Aggressive Texture (AT) gives an even more secure hold (but still won’t hurt the bare hand).SPECS: Polymer, hard texture or overmolded rubber, black. 4" (10cm) long.#573-000-008AV Amb. Rigid ERGO Grip, Blk, 3G18G79 � � $ 21.55#573-000-076AV Amb. ERGO SureGrip, Blk, 3G18N79 � � 21.55#573-000-077AV Amb. ERGO SureGrip, Dark Earth,

3G18C79 � � � � � � � � � � � � � � � � � � � � � � � � � � � 21.55#573-000-078AV AT Amb. ERGO SureGrip, Blk, 3G18B79 � � 21.55#573-000-026AV RH SureGrip ERGO, Blk, 3G18H85 � � � � 23.99

ERGO 2 SUREGRIP - Ergonomic finger grooves im-prove grip and trigger finger angle. Overmolded ma-terial won’t get slippery and resists oils and solvents. Fits both 5.56 and .308 AR-style rfles without using any spacer inserts. A2-sized inner cavity accepts small accessories. Includes grip, Gapper, and washer. Does not inlcude grip screw or grip plug. #573-000-068AV Ergo 2 Grip, Black, 3G18N79 � � � � � � � � � $ 21.55#573-000-069AV Ergo 2 Grip, Dark Earth, 3G18D79 � � � � � 21.55

TACTICAL DELUXE - Upward-curved grip exten-sion fills the web of the shooting hand, spreads recoil over a large area for excellent feel and com-fort. Available with a palm shelf that adjusts verti-cally ½" providing a custom fit for maximum recoil control. All models have textured finish. SPECS: Polymer, hard texture, or overmolded rubber, black. 2-5⁄8" (6.6cm) long. Palm shelf 3" (7.6cm) wide, 4" (10cm) long, 1" (2.5cm) thick. Includes attachment screw.#573-101-405AV Tact. Deluxe Grip w/Palm Shelf,

3G42P20 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 55.99#573-000-062AV SureGrip Tactical Deluxe Grip w/Palm

Shelf, 3G44B57 � � � � � � � � � � � � � � � � � � � � � 51.99

AR-15 GAPPER - Soft, polyurethane pad fits between pistol grip and frame to fill the gap under the trigger-guard latch. Prevents the sharp edges of the frame from rubbing or cutting your index finger.SPECS: Polyurethane, black. ½" (12mm) long. Solvent resistant.#573-000-004AV Gapper, 3G2H43 � � � � � � � � � � � � � � � � � � � � � $ 3.25

FALCON AR-15/M16 ERGO GRIPImproves Trigger & Recoil Control

Strong, fiberglass insert fits solidly against the frame, resists wear, won’t loosen. Orthopedic de-sign with palm swells and finger grooves reduces shock, increases shooting comfort; maintains a stock appearance. Available in black or Desert Tan. SPECS: Fiberglass core, rubber covered.

OVERMOLDED BEAVERTAIL PISTOL GRIP - fea-tures the same ergonomic feel as the Hogue AR-15 pistol grip, but adds an extended “beavertail” that adds extra cushion for the web of the hand. Fills in the gap at the rear of the receiver and gives comfortable padding all the way to the back. Available in black or Desert Tan. #408-000-116AV Overmolded Beavertail Pistol Grip,

Black, 8K20D34 � � � � � � � � � � � � � � � � � � � � �$ 21.99#408-000-117AV Overmolded Beavertail Pistol Grip,

Desert Tan, 8K22G30 � � � � � � � � � � � � � � � � 23.99

HOGUE AR-15/M16

OVERMOLDED™ PISTOL GRIPNon-Slip Grip Surface; Increases Comfort

#408-150-000AV Pistol Grip, Black, 8K21D01 � � � � � � � � � �$ 21.99#408-000-111AV Pistol Grip, Desert Tan, 8K23P96� � � � � � 23.96

Hey, who you callin' "Chubby"? Well, in this case, extra plumpness is good because it makes this ergonomically enhanced pistol grip sit so naturally and comfortably in your hand that it'll improve the way you handle and shoot your AR-15. Still has the front finger ledges and even the horizontal serrations of the classic A2 grip, with the addition of a rounded palm swell that fills your hand for secure, natural hand positioning each and every time you grasp the grip. A left-side thumb rest works in conjunction with the palm shelf to hold your hand in place for a consistent hold. A raised surface on the trigger finger side forces your finger into a natural curved position for better comfort and improved trigger control. Deep texturing ensures a positive gripping surface in all-weather conditions or when wearing gloves. For right-handed shooters only. Drop-in installation; bolt and washer not included, so be sure save your rifle's originals or order separately. So if one of your range bud-dies calls your new Luth-Ar grip "Chubby," just smile, say "Yep, sure is," and outshoot him/her on the next round! ab

LUTH-AR AR-15/M16

"CHUBBY" PISTOL GRIPMakes the Rifle Feel Like an

Extension of Your Hand

#100-028-071AV "Chubby" Pistol Grip, 3D15D42 � � � � � � � $ 22.51

This is the standard M16A2-type pistol grip used on military rifles and civilian AR-15s for de-cades. Molded from durable reinforced polymer this is the original Colt A2 design with the single

finger ledge on the front, vertical serrations on the rear, and deeply checkered panels on each side. All in all, it's surprisingly ergonomic and gives you a comfortable, secure hold on the firearm in all weath-er conditions or when wearing gloves. Fits all mil-spec A2-pattern AR-15 lower receivers. NOTE: This is just the pistol grip - bolt and washer are not included. ab

LUTH-AR AR-15/M16

A2 PISTOL GRIPCombat Tried & Proven

for Stable Weapon Control

#100-028-040AV A2 Pistol Grip, 3D3Q32 � � � � � � � � � � � � � � $ 4.18


brownells.com

AR

-15/M

16P

ISTO

L GR

IPS

Repositions the hand for a comfortable grasp and improved trigger finger location. Hand filling design with thumbrest and palmswell provide enhanced grip-ping endurance. Matte surface gives good, non-slip purchase. abSPECS: Black, glass filled Polypropylene, matte finish. Fits AR-15, AR-10 and AR-25 rifles. Right-hand only.

SIERRA PRECISION RIFLES AR-15/M16

SPR PISTOL GRIPEnhanced Grip & Comfort For Accurate Shooting

#936-001-015AV SPR Handgrip, 6C20G81� � � � � � � � � � � � � $ 27.99

Drop-in replacement for factory pistol grip is designed to give the tactical operator maximum weapon con-trol with minimum fatigue. Every aspect of the shooter-to-weapon interface was analyzed and tested to improve on the USGI A2 grip and give the shooter the best control in any type of operational environment. One-piece construction with integral triggerguard ensures the operator’s finger doesn’t get caught between the guard and the trigger and eliminates other pinch points. Over-molding where the grip meets the receiver helps keep the hand positioned exactly where it should be during fast movement, long periods in the ready position, and during rapid or full-auto fire. Palm swell, arched backstrap, flared bottom with forward finger ledge, and molded-in stippling further ensure to a firm, stress-free grip on the weapon. Molded from durable, reinforced polymer that resists impact, tem-perature extremes, moisture, and most cleaning solvents and oils. Snug-fitting, synthetic rubber plug in the bottom pulls out to allow storage inside the grip. Cavities inside the plug provide rattle-free storage for two spare CR-123 batteries. abSPECS: Reinforced molded polymer, black. Includes mounting hardware and instructions.

Ergonomic Comfort, Less Fatigue, Maximum Control During Rapid FireSE-2 w/

Loop

#100-004-343AV SE-1 Pistol Grip, Black, 5C37A13 � � � � � $ 39.99

STARK EQUIPMENT CORP AR-15/M16

PISTOL GRIP

Ergonomically enhanced pistol grips provide a more comfortable, secure grasp than standard, A2-style grip for better trigger control and recoil management with less fatigue. Improves weapon handling during precisely aimed shots as well as sustained semi- or full-auto fire. Hand-filling palm swells and non-slip “crackle” texturing keep your hand firmly in place, even when wet. Removable grip cap provides access to a roomy internal storage compartment for spare batter-ies, cleaning supplies, small bottle of oil, or even a spare bolt. Re-inforced, high-impact, molded polymer construction stands up to the rigors of harsh operational environments. Drop-in installation in minutes with included mounting hardware and instructions. ab

MOE® GRIP - Magpul Original Equipment (MOE) grip is a durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD® grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing. Compatible with Magpul MIAD Grip Cores and Enhanced Aluminum Triggerguard, available separately. SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. Drop-in replacement for AR-15/M16/M4 A2-type pistol grip. Can be installed on most AR-style .308 rifles; however, depending on model, there may be gap between the grip’s beavertail and the receiver. Mounting hardware included.#100-003-515AV MOE Grip, Black, 3K16L20 � � � � � � � � � � �$ 18.95#100-003-516AV MOE Grip, Dark Earth, 3K16B20 � � � � � � � 18.95#100-004-165AV MOE Grip, O.D. Green, 3K16I20 � � � � � � � 18.95#100-014-432AV MOE Grip, Stealth Gray, 3K16D20 � � � � � 18.95

MOE+™ GRIP - Same contours and hard-molded polymer construction as the original MOE Grip with the addition of an anti-slip overmolded rub-ber coating for enhanced weapon control in wet conditions or when hand is sweaty. A polymer cap secures small items inside the internal storage compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately). SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.#100-006-786AV MOE+ Grip, Black, 3K19J89 � � � � � � � � � �$ 22.75#100-007-570AV MOE+ Grip, Dark Earth, 3K19C46 � � � � � 22.75#100-007-572AV MOE+ Grip, O.D. Green, 3K19G46 � � � � 22.75#100-014-441AV MOE+ Grip, Stealth Gray, 3K19M46 � � � 22.75

MOE-K™ GRIP - Slimmed-down version of the original MOE grip for shooters with smaller hands or those who simply prefer a slimmer grip profile. Fits most AR-15/M16 type rifles, including AR-style .308s that use a standard AR-15 pistol grip. Nar-rower and shorter front to back than the original MOE or the standard A2 grip, the MOE-K is de-signed specifically for personal defense weapons and their operators by adding more vertical grip angle that brings the primary hand closer to the shooter’s body, thus improving control and retention. SPECS: Reinforced molded polymer, Black, Flat Dark Earth, O.D. Green, or Stealth Gray. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.

MAGPUL® AR-15/M16/AR-STYLE .308

PISTOL GRIPSImproves Comfort For Better Weapon Handling

& Control; Fixed & Adjustable Models

#100-008-866AV MOE-K Grip, Black, 3K16K60 � � � � � � � � $ 18.95#100-008-966AV MOE-K Grip, Dark Earth, 3K14F23 � � � � 18.95#100-014-442AV MOE-K Grip, Stealth Gray, 3K16L60 � � 18.95

MOE-K2+™ GRIP - Reinforced polymer grip features wrap around rubber overmolding and a steeper vertical angle than the MOE-K grip. Optimized for short length of pull weapons, the vertical grip brings the shooter’s hand closer to the body for improved weapon control. Full size grip features a unique back strap design which encourages proper trigger finger placement. Aggressive side texture combined with the pronounced angles on the front and back, provides a secure grip in wet conditions. Grip has stor-age area for spare parts or batteries, and will accept all standard Magpul grip cores.SPECS: Reinforced polymer, Black, Flat Dark Earth, Gray, and O.D. Green. Mounting hardware included. #100-016-407AV MOE-K2+ Grip, Black, 3K20E26� � � � � � $ 23.70#100-016-408AV MOE-K2+ Grip, FDE, 3K20Q27 � � � � � � 23.70#100-016-409AV MOE-K2+ Grip, Gray, 3K20I26 � � � � � � � 23.70#100-016-410AV MOE-K2+ Grip, O.D. Green, 3K20A27 � � 23.70

MOE-SL™ GRIP - Ideal for weapons with a short length of pull, this pistol grip gives a more vertical hold position. Angle of grip reduces strain on the wrist, brings the primary hand closer to the shooter’s body, and enhances weapon control in tactical situ-ations. The aggressive raised texture provides a pos-itive, non-slip grip even when wearing gloves. Grip is slightly smaller for a slimmer, more ergonomic feel. Can be installed on most AR-style .308 rifles; depending on the gun, there may be gap between the beavertail and the receiver. SPECS: Reinforced molded polymer, Black, Flat Dark Earth (FDE), O.D. Green (ODG), Stealth Gray. All mounting hardware included.#100-015-154AV MOE-SL Grip, Black, 3K16B60 � � � � � � � $ 18.95#100-015-159AV MOE-SL Grip, FDE, 3K16C60 � � � � � � � � 18.95#100-015-160AV MOE-SL Grip, ODG, 3K16K60 � � � � � � � 18.95#100-015-161AV MOE-SL Grip, Gray, 3K16P60 � � � � � � � � 18.95

MOE-K2™ GRIP - Offers the same slimmed-down profile and aggressive, grippable surface texture as the MOE-KTM grip, plus an even steeper vertical grip angle optimized for use with short LOP weapons. Brings the primary hand even closer to the shooter’s body for better control. Beavertail at the top rear fills the gap between the top of the grip and the receiver to protect and support the web of the hand, further enhancing control. Internal storage compartment accessible via removable plug in bottom. SPECS: Reinforced molded polymer, Black, Flat Dark Earth, O.D. Green, or Stealth Gray. Fits standard mil-spec AR-15/M16 lower receiver. Also fits most AR-style .308 rifles that accept AR-15/M16 grip. Mounting hardware included.#100-011-679AV MOE-K2 Grip, Black, 3K17D01 � � � � � � � $ 19.90#100-011-680AV MOE-K2 Grip, Dark Earth, 3K17E01 � � � 19.90#100-011-681AV MOE-K2 Grip, O.D. Green, 3K17H01 � � 19.90#100-011-682AV MOE-K2 Grip, Stealth Gray, 3K17G01 � � 19.90

MIAD® GEN 1.1 GRIP KIT - MIssion ADaptable (MIAD) modular grip system with interchangeable inserts lets you find the grip configuration that fits your hand size and mission requirements. All models come with main grip body and detachable rubber core which holds a ½ oz. lubrication bottle in the cap. Additional cores for storing batteries and other items are avail-able separately, below. Front- and backstrap inserts slide on easily, yet snap firmly into place and require no glue or screws to stay put. Comes with one straight and two different beavertail backstrap inserts, plus one straight and one finger-ledge frontstrap insert. SPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray.

#100-014-098AV AR-308 MIAD GEN 1.1 Kit, Black, 3K29Q19 � � � � � � � � � � � � � � � � � � � � � � � � � � � 34.15

#100-014-099AV AR-308 MIAD GEN 1.1 Kit, Dark Earth, 3K29L19 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 34.15

#100-019-348AV AR-308 MIAD GEN 1.1 Kit, O.D. Green, 3K29G19 � � � � � � � � � � � � � � � � � � � � � � � � � � � 34.15

#100-014-431AV AR-308 MIAD GEN 1.1 Kit, Stealth Gray, 3K29E19 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 34.15

MIAD GRIP CORES - Further custom-ize your MIAD grip to suit your specific needs with one of these interchange-able internal storage compartments. No tools or permanent alternations required. 123 Battery Core holds two spare CR123 batteries in a sealed, waterproof com-partment, keeping them ready for quick deployment if the batteries in your laser, light, or red dot sight fail. AA/AAA Bat-tery Core provides waterproof, rattle-free storage of two AA batteries or, with the included internal spacer installed, two AAA batteries. Reversible rubber cap has “SPENT” stamped on one side, so you al-ways know the status of the batteries in the compartment. Bolt & Firing Pin Core securely holds one, standard AR-15/M16 bolt, plus a spare firing pin, should your gun suffer a failure in competition or dur-ing a critical operation. SPECS: Molded polymer, black.#100-003-043AV MIAD 123 Battery Grip Core, 3K11L28 $ 14.20#100-003-044AV MIAD AA/AAA Battery Grip Core,

3K11P28 � � � � � � � � � � � � � � � � � � � � � � � � � � � 14.20#100-003-045AV MIAD Bolt & Firing Pin Grip Core,

3K11K28 � � � � � � � � � � � � � � � � � � � � � � � � � � � 14.20

MIAD®/MOE® LUBE BOTTLE GRIP CORE - Inserts secure-ly into the pistol grip and contains a 1/2 fl. oz. reusable plastic bottle for lubricant. Comes standard with MIAD GEN 1.1 Grips, also fits in MOE®, MOE-K2®, and MOE® AK Grips. Base is molded hard polymer, black. #100-016-543AV Lube Bottle Grip Core,

3K11C28 � � � � � � � � � � � � � � � � � � � $ 14.20

#100-014-095AV AR-15/M16 MIAD GEN 1.1 Kit, Black, 3K29N85 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.15

#100-014-096AV AR-15/M16 MIAD GEN 1.1 Kit, Dark Earth, 3K29B19 � � � � � � � � � � � � � � � � � � � � 34.15

#100-019-347AV AR-15/M16 MIAD GEN 1.1 Kit, O.D. Green, 3K29A19 � � � � � � � � � � � � � � � � � � � 34.15

#100-014-428AV AR-15/M16 MIAD GEN 1.1 Kit, Stealth Gray, 3K29A19 � � � � � � � � � � � � � � � � � � � � � 34.15

AA/AAA Battery Core & Spacer

123 Battery Core

Bolt & Firing Pin Core

Relocates the grip so just the tip of your finger is on the trigger. Gives precise trigger control for more accurate shot placement. Adapter fits between the grip and frame without alteration to the rifle. Moves the grip .75" (19mm) to the rear. abSPECS: Plastic, black. Includes attaching screws and instructions.

ARMSTECH AR-15/M16

RITE-PULL GRIP ADAPTERPositions The Trigger Finger For Precision Shooting

#432-001-015AV Rite-Pull Adapter, 2C19D65 � � � � � � � � � $ 26.99

Replaces the pistol grip to make an AR-15 fitted with an A2-type, non-adjustable buttstock meet the requirements of California Penal Code §12276.1(a)(1)(A). Gives the rifle a “sporter” look and feel. Rounded edges and aggressive surface texturing give your hand a comfortable yet secure grasp. Uses existing grip screw. Laws and regulations can change at any time; the user is responsible for mak-ing sure his rifle stays compliant. abSPECS: Molded polymer, black. 61/8" (15.6cm) long, 11/8" (2.9cm) wide, 45/32" (10.6cm) high. 4.6 oz. (130g) wt. Fits AR-15 with an A2 buttstock installed.

WAYNE STUDIOS AR-15

“MONSTERMAN” GRIPEliminates The Pistol Grip To Comply

With California Law

#100-006-291AV AR-15 MonsterMan Grip, 3Z37E59 � � � $ 49.99

ab

BG-16 RIFLE GRIP - Handy storage grip features two internal cavities for two Aimpoint-type power cells, plus two AA or CR-123 lithium batteries, or your choice of other small spare parts or supplies. Anti-rattle foam spacers keep everything quiet. Flexible cap includes integral seals to protect contents from dirt and mois-ture. Front grip extension covers the triggerguard/re-ceiver gap to prevent pinching. Curved backstrap is shaped to fill and support the hand and provides the correct finger-to-trigger position; aggressive grip texture ensures positive hold. Includes stainless steel, Dry-Lok attaching screw and installation tool.SPECS: Resin-impregnated polymer, black. 41/8" (10.5cm) high. Fits rifles that accept standard AR-15/M16 grips.#071-000-015AV BG-16 Rifle Grip, Black, 9B35J19 � � � � $ 36.99

BG-17 RIFLE GRIP - Same construction as the BG-16 with ergonomics that fit larger-handed shooters. A "beavertail" at the top rear of the grip covers the gap between the grip and the receiver to protect the web of your hand from getting caught or pinched. A single large internal storage compartment holds bat-teries, small spare parts, or supplies. Includes stain-less steel, Dry-Lok attaching screw and installation tool. SPECS: Resin-impregnated polymer, black. 41/2" (11.4cm) high. Base 23/8" (6cm) long, 11/4" (3.2cm) wide. Fits AR-15/M16/M4 series rifles and clones, and other rifles that accept an A2 grip, including ArmaLite® AR-10®, FN SCAR Mk-16/Mk-20, and Knight’s Armament SR-25/MK-11 Mod 0 & 1.#100-006-309AV BG-17 Rifle Grip, Black, 9B29L80 � � � � $ 36.99

TANGODOWN AR-15/M16 BATTLEGRIPTough, Combat-Tested Grip With Built-In Utility Features

ab

AR

-15

/M16


SINCE 1939

VE

RT

ICA

L G

RIP

SP

IST

OL

GR

IPS

V Seven extends its line of corrosion-resis-tant Titanium parts to the hidden but critically important pistol grip screw. This is a drop-in replacement for the standard screw that fits mil-spec lower receivers. Shaves off a bit of weight, too - weighs a mere 3.2 grams. This button-head screw is machined from Grade 5 Titanium, with a natural silver-gray finish. Install with a 5/32" hex wrench; you'll need an oil-based lubricant or thread-locker for a proper bond with your rifle's receiver (dry installation is not recom-mended). ab


TITANIUM PISTOL GRIP SCREW

#100-500-027AV Titanium Grip Screw, 7G7F76 � � � � � � � � � $ 7.76

Don't Lose Your Grip - Lightweight, Strong, Highly Corrosion-Resistant Screw Keeps It On

Slightly angled vertical grip attaches facing forward or in reverse to help improve weapon handling and comfort while accommo-dating shooting preference. A forward tilt increases the rigidity of the forearm and allows for more natural wrist position, or switch to a rearward mount to enhance stability when grabbing the hand-guard and grip. Flat sides with aggressive texturing as well as raised horizontal ridges on the frontstrap and backstrap ensure rotational control and superior grasp. Full-Size/Short Picatinny clamp to any MIL-STD 1913 Picatinny rail with field expedient tools, like a coin or cartridge rim. Storage compartment with a hinged trap door and water-resistant rubber gasket holds spare batteries or other acces-sories. Short KeyMod™ indexes on three KeyMod hole points for quick, tool-less attachment. Also minimizes snagging and delivers the same interior storage as Picatinny style. MOD 3 is an ultra light-weight version of the Short grips, with a narrower profile and no storage area. Attaches to Picatinny OR KeyMod rails. Requires T15 Torx driver to install and remove. abSPECS: Impact-resistant polymers. Full-Length - 4¾" (12.1cm) high. 3.6 oz. (102.1g) wt. Short - 3" (7.6cm). 2.75 oz. (78g) wt. MOD 3 - 2¾" (7cm). 2 oz. (56.7g) wt.

BRAVO COMPANY

BCMGUNFIGHTER™ VERTICAL GRIPS

Angled Grips Mount Forward Or Rearward; Full-Size Or Short Lengths Full-Size

#100-012-515AV Full-Size Picatinny Vertical Grip, Black, 1E38N21 � � � � � � � � � � � � � � � � � � � $ 39.99

#100-012-516AV Full-Size Picatinny Vertical Grip, Flat Dark Earth, 1E38H21 � � � � � � � � � � � � � � 39.99

#100-013-646AV Short Picatinny Vertical Grip, Black, 1E34J39 � � � � � � � � � � � � � � � � � � � � � � � � � � 35.99

#100-013-647AV Short Picatinny Vertical Grip, Flat Dark Earth, 1E34P39 � � � � � � � � � � � � � � 35.99

#100-015-178AV Short KeyMod Vertical Grip, Black, 1E38F21 � � � � � � � � � � � � � � � � � � � � � � � � � � 39.99

#100-015-179AV Short KeyMod Vertical Grip, Flat Dark Earth, 1E38D21 � � � � � � � � � � � � � � 39.99

#100-015-180AV Short KeyMod Vertical Grip, Wolf Gray, 1E38P21 � � � � � � � � � � � � � � � � � � � � 39.99

#100-016-496AV MOD 3 Picatinny Vertical Grip, Black, 1E19N09 � � � � � � � � � � � � � � � � � � � 19.99

#100-016-497AV MOD 3 Picatinny Vertical Grip, Flat Dark Earth, 1E19G09 � � � � � � � � � � � � � � 19.99

#100-016-498AV MOD 3 Picatinny Vertical Grip, Wolf Gray, 1E19F09 � � � � � � � � � � � � � � � � � � � � 19.99

#100-016-493AV MOD 3 KeyMod Vertical Grip, Black, 1E18G13 � � � � � � � � � � � � � � � � � � � � � � � � � � 18.99

#100-016-494AV MOD 3 KeyMod Vertical Grip, Flat Dark Earth, 1E18D13 � � � � � � � � � � � � � � 18.99

#100-016-495AV MOD 3 KeyMod Vertical Grip, Wolf Gray, 1E18C13 � � � � � � � � � � � � � � � � � � � � 18.99

ShortMod 3

Fold-away vertical grip clamps to any forend with a bottom accessory rail and provides a comfortable plat-form for the support hand to improve control. Makes weapon easier to point to help you get on target—or change targets—fast. Pronounced finger grooves, tex-tured surface, and a hand-filling shape help you main-tain steady downward force to counteract muzzle rise

during rapid fire. Hit the pushbutton on the left side of the grip to change between five locking positions: vertical, 45° forward/rear-ward, or folded forward/backward parallel with the handguard for storage or carry. Constructed of lightweight, yet robust, fiberglass-reinforced molded nylon to stand up to hard use; slides over Pica-tinny forend rail and locks in place with a steel crossbolt for solid, wobble-free installation. abSPECS: Fiberglass-reinforced, injection-molded nylon, black. 43/4" (12.1cm) long fully extended. Requires 21/8" (5.4cm) rail space. 4.4 oz. (125g) weight.

ADVANCED TECHNOLOGY AR-15/M16

FOLDING VERTICAL FOREND GRIPHelps You Get On Target Fast & Improves Recoil

Control; Folds Away For Storage

#019-000-025AV Folding Vertical Grip, 9A22H99 � � � � � $ 24.99

Injection-molded, polymer-resin, forend grips improve stability and overall rifle control by giving your forward hand a comfortable, hand filling, textured gripping surface. Helps you maintain a natural fighting stance, reduces on-target time, and helps maintain muzzle control during rapid fire. Hollow center provides convenient stor-age space for spare batteries or other small items; rubber cap keeps out dust and moisture. All models clamp securely to forends with Picatinny or Weaver-style rails on underside.SPECS: Molded, reinforced polymer, black.

COMMAND ARMS AR-15/M16

VERTICAL FOREND GRIPSImproves Handling, Comfort & Controllability; Provides Extra Storage

QUICK DETACH - Quickly detachable and compact. Mounts securely to Picatinny and Weaver-style rail systems using an internal threaded tension rod. Deeply ribbed, no-slip gripping surface. Removable plug is threaded into the base of the tension rod with a rubber O-ring to provide waterproof storage for up to three, lithium 123 size batteries.SPECS: 47/8" (12.4cm) long.#100-002-454AV Quick Detach Forend Storage Grip,

6C00CDG � � � � � � � � � � � � � � � � � � � � � � � � � $ 26.99

EVG FINGER GROOVE - Finger grooves and rub-berized palm swell position your hand for excellent recoil control, and aggressively-checkered surface helps keep your grip in all weather. Crossbolt locking system with captive thumb nut keeps the grip rock solid on the forend. Storage compartment holds two CR 123A batteries or other small items.SPECS: 47/8" (12.4cm) long.#100-009-728AV EVG Vertical Grip, 6C18L47 � � � � � � � � � $ 19.80

COMBAT - Ergonomic grip, with molded finger grooves and a hand filling palm swell, provides the user with improved weapon control. This durable polymer grip includes a PGS removable pressure switch mount, plus a hollow core, with contoured screw cap, for stor-ing batteries, small tools, or other accessories. Cap-tive thumbnut allows grip to be mounted easily on any Picatinny rail without the use of tools. SPECS: 2 3/8" (6.0cm) long, 2 1/4" (5.7cm) wide, 5 7/8" (14.9cm) high. 4 oz. (113.4g) wt. #100-015-031AV Combat Vertical Grip, 6C35K31 � � � � � $ 40.00

Lightweight vertical grip clamps securely to Picatinny forend rail to give the operator a more comfortable shoot-

ing stance and better weapon control. Helps control muzzle climb during sustained fire for quicker, more accurate follow-up shots, and minimizes hand fatigue when holding weapon in the ready position for long periods of time. Shape is narrow at the top for secure purchase by the thumb and forefinger, with a palm-filling swell at the middle, and wide, deep, concentric ribs around the lower 1/3 of the grip for a comfortable, ultra-secure grasp. Removable core has a large, water-proof storage compartment that can hold a spare bolt assembly, two AA or CR123 batteries, or other small parts. Screw-on, O-ring sealed cap removes easily and has padded interior to prevent rattling of items inside. Easy-to-use clamping system attaches simply by unscrewing the entire core, sliding the grip onto the rail, and lining it up over a slot with the aid of the alignment windows. Then screw the core back in tight for a rock-solid attachment that won’t let loose. Reinforced, Acetal cold polymer construction handles the knocks and dings of tactical operations, as well as extremes of heat, cold, and humidity. abSPECS: Acetal polymer, matte black. Grip extends 43/4" (12.1cm) below rail. Approx. 15/16" (3.3cm) at widest point. 2.4 oz. (69g) weight.

GG&G AR-15/M16

VERTICAL FOREGRIPBetter Control & Recoil Management;

Reduced Hand Fatigue In The Ready Position

#336-000-022AV Vertical Foregrip, 6C26H76 � � � � � � � �$ 31.99

Dual-function vertical grip locks to the bottom accessory rail of your tactical rifle’s forend to give you enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surround-ing surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. GPS-02 has steel inserts in legs for maximum strength in high-stress tactical operations. GPS-LE (Law Enforcement) is an economical alternative for applications where the steel reinforcements are excess to require-ments. Both models accept GPRS1 and GPRS2 bolt-on accessory rails, available separately. May be used on many non-AR rifles and light machine guns with forend accessory rails. abSPECS: Reinforced polymer, Black or Desert Tan. 61/4" (15.9cm) long with legs retracted. 81/2" (21.6cm) high with legs extended. 13/8" (3.5cm) diameter. GPS-02 – Steel inserts in legs. 7.8 oz. (220g) weight. GPS-LE - 7 oz. (197g) weight.

GRIP POD SYSTEMS AR-15/M16

GRIP PODVertical Forend Grip With Built-In

Quick-Deploy Bipod

#100-003-226AV GPS-02 Grip Pod, Blk, 3B133C33 � � � � � � $ 152.99#100-004-611AV GPS-02 Grip Pod, Desert Tan, 3B133N33 � � 153.99#100-003-633AV GPS-LE Grip Pod, Black, 3B88G12 � � � � � 103.99#100-004-610AV GPS-LE Grip Pod, Desert Tan, 3B86M16 � � 101.99

Following in the footsteps of Magpul’s original MOE MVG, the M-LOK MVG is a light-weight vertical foregrip that attaches directly to any M-LOK compatible handguard or forend without requiring Picatinny rails. Made from

the same high-strength molded reinforced polymer as other Mag-pul products, the M-LOK MVG has the new TSP texture that gives a

MAGPUL AR-15/M16

M-LOKTM MVG VERTICAL GRIP®

Gives You A Secure Hold & Excellent Control Of Any M-LOK Compatible Weapon

#100-016-130AV M-LOK MVG Vert. Grip, Blk, 3K18K64 � � $ 21.80#100-016-134AV M-LOK MVG Vert. Grip, FDE, 3K18P64� � 21.80#100-016-139AV M-LOK MVG Vert. Grip, ODG, 3K18A64 � � 21.80#100-016-136AV M-LOK MVG Vert. Grip, Gray, 3K18D64 � � 21.80

sure hold and positive weapon control in all environments. Ergo-rounded contours and a shorter length, it has been optimized for use with the “thumb break method” of shooting, yet also functions well as a traditional vertical foregrip. Comes with all hardware necessary for attachment directly to M-LOK Slots on aluminum or polymer handguards and forends. Available in Black (Blk), Flat Dark Earth (FDE), O.D. Green (ODG), and Stealth Gray. ab

Lightweight vertical grips position your support hand close to the barrel to help you maintain maximum weapon control at all times. Ergonomically shaped de-sign is optimized for use with the “thumb break” method of grasping the weapon, yet works just as well with a traditional vertical grip stance. Aggressive horizontal serrations on the front and back, plus crackle texturing

on the sides ensure a secure grasp in all weather condi-tions. MVG® (MOE® Vertical Grip) is designed to clamp easily to Magpul MOE handguards and the handguard of the Bushmaster ACR™ (Adaptive Combat Rifle) without the need for an accessory rail. RVG® (Rail Vertical Grip) combines the MVG’s ergonomic features with a conven-tional Picatinny attachment system for use on standard railed handguards. Includes an adapter that enables in-

stallation on many non-railed forends, too. abSPECS: Reinforced injection-molded polymer, available in Black, Dark Earth, O.D. Green, or Stealth Gray. All mounting hardware and instruc-tions included.

MAGPUL AR-15/M16

VERTICAL GRIPSFor Positive, Comfortable Weapon Control At All Times

#100-005-588AV MVG MOE Vert. Grip, Blk, 3K16F60 � � � �$ 18.95#100-005-589AV MVG MOE Vert. Grip, FDE, 3K16C60 � � 18.95#100-005-591AV MVG MOE Vert. Grip, ODG, 3K16I60 � � 18.95#100-014-448AV MVG MOE Vert. Grip, Gray, 3K16A60 � � 18.95#100-005-592AV RVG Rail Vert. Grip, Blk, 3K20E77 � � � � � 23.70#100-005-593AV RVG Rail Vert. Grip, FDE, 3K20I77 � � � � � 23.70#100-005-595AV RVG Rail Vert. Grip, ODG, 3K20P77 � � � 23.70#100-014-450AV RVG Rail Vert. Grip, Gray, 3K20N77 � � � 23.70

Made of reinforced polymer, an-gled fore grip helps reduce wrist fatigue and improves weapon control. Stream-lined grip positions the shooter’s hand high on the centerline of the bore. Forward finger index provides additional options in gripping and hand placement. Minimalist design and low profile permits a much wider range of mounting location options. One piece grip includes all hardware for mounting to either aluminum or polymer handguards and forends that have M-Lok slots. abSPECS: Reinforced polymer, Black, Flat Dark Earth, Gray, O.D. Green. 4" (10.2cm) long. 1.2 oz. (34g) wt.

MAGPUL AR-15/M16

M-LOK ANGLED FORE GRIPSProvides Greater Comfort & Ensures

Correct Wrist Angles

#100-016-476AV M-LOK Angled Fore Grip, Black, 3K21N89 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 25.60

#100-016-477AV M-LOK Angled Fore Grip, FDE, 3K21C89 � � � � � � � � � � � � � � � � � � � � � � � � � � 25.60

#100-016-478AV M-LOK Angled Fore Grip, Gray, 3K21B89� � � � � � � � � � � � � � � � � � � � � � � � � � � 25.60

#100-016-479AV M-LOK Angled Fore Grip, O.D. Green, 3K21L89 � � � � � � � � � � � � � � � � � � � � � � � � � � � 25.60

AR

-15/M

16


brownells.com

VE

RT

ICA

L GR

IPS

Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG® (Angled Fore-Grip) positions the support hand close to the centerline of the bore for maximum recoil con-trol to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the “clenched fist” stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready posi-tion. Improves on the “thumb break” hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construc-tion stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands. Interchangeable inserts give the choice of a straight, uninter-rupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks se-curely in place with a hardened steel crossbolt. The original AFG1™ provides a large grasping surface and covers approximately 5½" of rail. The more compact AFG2™ is shorter and narrower to take up even less rail space, with enough clearance to fit a larger variety of weapons. Both models may be installed on tactical shotguns and other rifles with railed forends; won’t interfere with insertion and removal of magazines on AK-47s. abSPECS: Reinforced molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. Fits Picatinny-type rails. AFG1 - 5½" (14cm) long, approxi-mately 1 5/8" (4.1cm) wide, extends approximately 1¾" (4.5cm) below rail. 2.8 oz. (79g) wt. AFG2 - 4¾" (12cm) long, 1 3/8" (3.5cm) wide, extends approximately 2" (5.1cm) below rail.

Enhances Control & Pointability While

Minimizing Fatigue In The “Ready” Position

#100-004-989AV Magpul AFG1, Black, 3K30H54 � � � � � � �$ 33.20#100-004-990AV Magpul AFG1, Dark Earth, 3K30I54 � � � � 33.20#100-004-991AV Magpul AFG1, O.D. Green, 3K30D54 � � 33.20#100-014-451AV Magpul AFG1, Gray, 3K30N54 � � � � � � � � 33.20#100-006-196AV Magpul AFG2, Black, 3K30G54 � � � � � � � 33.20#100-010-590AV Magpul AFG2, Dark Earth, 3K30A54 � � � 33.20#100-010-591AV Magpul AFG2, O.D. Green, 3K30Q54 � � 33.20#100-014-453AV Magpul AFG2, Gray, 3K30D54 � � � � � � � � 33.20

MAGPUL AR-15/M16

ANGLED FORE-GRIP

Large diameter, ribbed vertical grip helps prevent hand fatigue and cramping during long periods in the ready position. Improves weapon control and keeps hand away from hot handguard during sustained fire. Dual locking bars provide a rock-solid mounting interface to MIL-STD 1913 rails. Internal storage compartment for spare batteries or parts. O-ring on the screw-on cap forms a waterproof seal down to 66 ft. deep. Standard Battlegrip – Full-size grip has enough inter-nal storage for a complete M4/M16 bolt assembly. Integral pocket for a light/laser remote pressure switch allows easy access to the switch yet protects it from bumps, damage, and accidental acti-vation. Sliding panel covers pocket when switch is not mounted. Stubby Battlegrip – Low-profile “Stubby” grip keeps M4 carbines, breaching shotguns, and other CQB weapons as compact as pos-sible and won’t interfere with most vehicle gun racks. No pressure switch pocket. abSPECS: Injection-molded, fiberglass-reinforced polymer resin, Black or Dark Earth. Standard - 43/4" (12.1cm) long. Stubby - 33/8" (8.6cm) long.

Improves Weapon Control; Standard & “Stubby” Models

#071-000-034AV Battlegrip, Black, 9B64J99 � � � � � � � � � � �$ 67.99#071-000-038AV Battlegrip, Dark Earth, 9B64M99 � � � � � � 67.99#071-000-040AV Stubby Battlegrip, Black, 9B58E99 � � � � 61.99#071-000-041AV Stubby Battlegrip, FDE, 9B58K99 � � � � � 61.99

TANGODOWN AR-15/M16

BATTLEGRIP VERTICAL GRIP

Deeply knurled vertical forend grip provides a comfortable, secure grasp for outstanding recoil con-trol and ultra-fast pointability. Modular design lets you choose a secure, full-palm configuration, or by un-

screwing and removing the center section, a low-profile “stubby” grip. Full-length, spring-loaded locking bar, plus front and rear rail lugs ensure a rock-solid installation on any Picatinny rail. Flush-fit crossbolt minimizes risk of snagging on other gear. Rugged, all alu-minum construction with waterproof O-ring seals to keep contents of the roomy internal storage compartment dry. abSPECS: Aluminum, hardcoat anodized, Black or Dark Earth. 41/2" (11.43 cm) long, 3" (7.62 cm) long in stubby configuration, 11/4" (3.2 cm) O.D. 5.9 oz. (167g) weight. Fits Picatinny rail systems.


MODULAR COMBAT GRIPEasily Converts From Full-Length

To Stubby Configuration

#100-004-377AV Modular Grip, Black, 3B59K82 � � � � � � � $ 67.99#100-004-378AV Modular Grip, Dk Earth, 3B56G97 � � � � 72.99

MA

GA

ZIN

ES &

PA

RT

S

Brand-new, factory-made, Generation II magazines built by Armalite® feature a spot-weld-ed, heavy gauge steel body that won’t distort when fully loaded

and a contoured follower designed to ensure exceptionally smooth, reliable feeding. These aren’t converted M14 magazines, but mags purpose-built specifically for the AR-10 - the same mags that come with new rifles. Factory marked floorplate. abSPECS: Steel, Parkerized, matte black. Fits Armalite AR-10 chambered in .308/7.62mm.

ARMALITE® AR-10® MAGAZINESSame Factory-Built

Magazines That Ship With New AR-10s

#062-000-003AV AR-10 Magazine, 15-Rd, 2F28K99 � � � $ 29.99#062-000-004AV AR-10 Magazine, 10-Rd, 2F33C19 � � � 34.99#062-000-005AV AR-10 Magazine, 5-Rd, 2F28I99 � � � � � 29.99

All-steel magazine fits any AR-15 chambered for the 6.8mm Remington SPC cartridge - and gives you a full 30 rounds, like a standard mil-spec maga-zine, between reloads. This is the same high-qual-ity magazine that Barrett supplies with their REC7 rifles. Tough steel body is Teflon® coated to resist scratches and aid in smooth seating in the mag well. Polymer follower helps rounds feed smoothly. abSPECS: Steel, matte black Teflon finish, polymer fol-lower. 30-round capacity. Fits AR-15 chambered in 6.8mm Remington SPC.

BARRETT AR-15

30-RD 6.8 SPC STEEL MAGAZINETop Quality, Magazine For ARs Chambered for

the Hard-Hitting 6.8 Cartridge

#100-010-923AV 30-Rd 6.8 SPC Mag, 4G37L74 � � � � � � � $ 39.99

We’ve offered these aluminum-bodied, military-type AR-15/M16 magazines for many years. The difference between ours and similar-looking but cheaper alternatives is not in the configuration but in the quality of the materials and workmanship. When we originally decided to sell AR-15/M16 magazines, reliability was our first priority. Accord-ing to our customers, who have purchased hundreds of thousands of these mags over the years, we succeeded!

But magazine technology has moved on in the last 15 years, even for the classic Brownells 30-rounder. This new edition of Old Faithful has been upgraded with a Magpul® Enhanced Self-Levelling Follower™. Its four-way anti-tilt design fully supports the round stack and helps keep it moving steadily, smoothly, and consistently to ensure flawless feeding in the harshest tactical or competition condi-tions. A small upgrade, maybe – most of the time the old green plastic USGI follower works just fine. But why skimp? The other components are made of mil-spec materials and manufactured under strict ISO quality-control standards. The heat-treated, welded aluminum body is hardcoat anodized for superior corrosion resistance, then given a tough, dry-lube coating to eliminate the need for additional lubricants that would attract dust, sand, or dirt. Inside, a corrosion-resistant stainless steel spring provides the power. Load these mags to maximum capacity, and fire the full 30 rounds you expect. No jams, no misfeeds, no hangups. The straight-body 20-round model has the same features but retains the older-style military-type follower.

We’ve often said it: your rifle is only as reliable as its magazine. When the difference between a “bang” and a “click” is life and death, magazine failure is more than inconvenient – it can be fatal. You need a magazine of uncompromising quality and reliability that’s built to last and ready to run hard. Make sure the magazine in your AR-15 is from Brownells. abSPECS: Aluminum body, hard-anodized, matte black (BLK) or Flat Dark Earth (FDE), with dry-lube coating. Stamped steel floorplate, black oxide finish. Green reinforced polymer resin follower. Stainless steel spring. NOTE: Exterior of magazine bodies will show some scuff marks where they have been tested in jigs at the factory for dimensional compliance. 078-000-454AV 30-Rd AR-15 Magazine, BLK, 5C11A39 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 13.99 078-000-455AV 30-Rd AR-15 Magazine, FDE, 5C12K21 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14.99#078-000-160AV 20-Rd AR-15 Magazine, 9Z12N99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.99

AR-15/M16 MAGAZINES

Straight body 20-Rd

The Most Up-To-Date & Reliable Civilian Magazine Available UPDATED FOR 2019!

Our Retro Waffle magazine is a close replica of the original mili-tary M16 magazines issued in the late 1950s and early ’60s. With the distinctive waffle pattern stamped into its steel (NOT aluminum!) body, just like the originals, our Waffle magazine gives the final touch of period accuracy to your "Retro" reproduction rifle. Most of the original USGI waffle mags were destroyed by the Department of Defense and so are extremely rare and hard to come by - and the few that survive are collector’s items too valuable to shoot. Our mags give you the period-correct appearance at a fraction of the cost, with 100% up-to-date and reliable innards for dependable function in ANY AR-15 - new, old, or reproduction. It has a fully heat-treated (for strength) carbon steel magazine body with the waffle pattern crisply stamped into the sheet metal and a durable, period-correct matte black Parkerized finish. The floorplate and spring are from the Brownells USGI 20-round aluminum magazines.

With a Retro Waffle 20-round M16 magazine, you give your retro AR-15 build the right vintage military look. The waffle texture gives any AR-15 shooter extra "purchase" to aid in fast mag changes in non-retro rifles, too. ab

AR-15/M16

EARLY-STYLE 20-RD"WAFFLE" MAGAZINE

Forget About Scrounging for Battered Originals! Brand-New "Waffle" Mags Are Available Again

#078-000-365AV Early AR-15 "Waffle" Mag, 20-Rd, 9Z42C79 � �$ 49.99

ab

ab

Dependable, high-capacity Sonic X magazine handles like a standard AR-15/M16 magazine and delivers 10 rounds of .22 LR ammunition in a rifle fitted with the CMMG .22 LR Conversion Kit or any Atchisson-type conversion system. Rigorously range-tested for superb reliability in both semi- and full-auto rifles. Extended, anti-tilt follower acts as a

bolt stop after last round is fired. Tough, impact-resistant polycar-bonate shell and follower are self-lubricating, so they work with the constant-force spring to deliver smooth, uniform feeding for consistent operation. Nylon feed lips; mag body halves are perma-nently bonded together. Base plate, follower, plug, and spring can be removed for cleaning. abSPECS: Injection-molded polycarbonate, transluscent Smoke. Fits AR-15/M16 with a CMMG .22 LR Conversion Kit or other Atchisson-type conver-sion system. Also fits SIG 522.

50-RD DRUM MAGAZINE - Dependable, super-capacity drum magazine lets you shoot extended 50-round strings for plenty of plinking fun with a semi- or full-auto .22 LR conversion. Same rugged polycarbonate construction as the Black Dog .22 LR box magazine. Easy to disassemble for cleaning (in-structions included).SPECS: Injection-molded polycarbonate, smoke. Standard model fits AR-15/M16 with a CMMG .22 LR conversion kit or similar Atchisson-type conversion system. May require some fine tuning to ensure proper feeding in full-auto rifles. M&P15-22 fits Smith & Wesson M&P15-22 rifle only.

#100-005-584AV Standard 50-Rd Drum Magazine, 1B56Q39 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 65.99

#100-009-124AV M&P15-22 50-Rd Drum Magazine, 1B62N28 � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.99

BLACK DOG MACHINE AR-15/M16

MAGAZINES FOR .22 LR CONVERSIONS

Shoot More, Reload Less; Full-Body Design Handles Like A Mil-Spec Magazine

#100-014-665AV 10-Rd Sonic X .22 LR Mag, 1B13G43 � �$ 15.99

.22 LR MAGAZINE LOADER - Easy to use loader helps you quickly fill up your Black Dog .22 LR AR-15 conver-sion magazines without finger strain. Slide the loader over the magazine, push down, insert round, release and repeat until magazine is full. Molded from durable, fiberglass-reinforced polymer that resists impact and solvents to provide years of service.SPECS: Fiberglass-reinforced molded polymer, black. Fits Brownells, Black Dog Machine, and Ciener magazines for .22 LR AR-15/M16 conversions.#100-005-583AV .22 LR Magazine Loader, 1B10J01� � � � �$ 11.09

Magazine not included

AR

-15

/M16


SINCE 1939

Made of durable heat-treated steel, this rugged high-capacity magazine fits 9mm AR-15 "pistol caliber carbine" (PCC) conversions that accept Colt-pattern magazines. The Xylan® finish greatly reduces friction while offering excellent protection against wear and corrosion. Reli-able and smooth ammunition feed is further ensured by a steel follower that will not distort or twist under a full

load. Numbered round-count windows let you quickly determine the amount of remaining ammunition in a partial mag after a tactical reload. Comes with bolt hold-open tab for those ARs fitted with a hold-open feature on the conversion block. The easy-to-remove floorplate makes maintenance and cleaning quick and simple. abSPECS: All steel body. Matte black Xylan finish. Steel follower and spring. Removable steel floorplate. Fits 9mm AR-15 rifles that accept Colt-style magazines.

AR-15

32-ROUND 9MM MAGAZINERugged, All-Steel High-Capacity Magazine

for Your AR Pistol or PCC

#078-000-320AV 32-Rd 9mm AR-15 Mag, Each, 8G31I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99

#078-000-198AV 32-Rd 9mm AR-15 Mag, 3-Pak, 8G95F99 � � � � � � � � � � � � � � � � � � � � � � � � � � 104.99

Rugged, dependable 25-round magazine is specifically designed to help ensure reliable feed and function with CMMG and similar Atchisson-type .22 LR rimfire conversion systems. Injection-mold-ed polymer construction stands up to the rigors of intensive plinking or tactical training. Mag body is the same size as a curved, USGI style 30-round

magazine, so it fits conveniently in your existing magazine pouches and carriers. Self-lubricating follower keeps the round stack moving smoothly, and serves as a bolt hold-open device when the magazine runs dry. Easy to remove floorplate allows easy access for cleaning, or remove six hex-head screws for complete disassembly. abSPECS: Reinforced, injection-molded polymer, matte gray. Fits AR-15/M16 with a CMMG .22 LR Conversion Kit or other Atchisson-type conver-sion system.

CMMG AR-15/M16

25-RD .22 LR MAGAZINERugged, Smooth-Feeding Full-Size Magazine

For AR-15 .22 Conversions

#100-004-635AV 25-Rd .22 LR AR-15 Mag, 3B18I32 � � � �$ 23.99

This is our compact, straight-body, mil-spec 20-round magazine upgraded with one of the most popular aftermarket accessories, the Magpul® Ranger Plate™. This floorplate has an easy-to-grasp finger loop that aids in fast, positive extraction from tight mag pouches and helps you hang onto the empty magazine with just a finger after a tactical reload. Made of tough stainless steel overmolded with non-slip Santoprene™ synthetic rubber to cushion the magazine from impact when dropped on con-crete or other hard surfaces. Inside, the fiberglass-reinforced plastic follower is specially designed for smooth operation in a straight-body magazine, and the chrome-silicon spring is less prone to spring “set” than other spring materials - ideal if you keep your mags loaded for extended periods of time. NOTE: Installation of Ranger floorplate on 20-round models may limit capacity to 18 or 19 rounds. abSPECS: Aluminum body, hard-anodized Military Gray, dry-lube coated. Chrome silicon steel spring. Reinforced plastic follower. Ranger - includes stainless steel floorplate overmolded with Santoprene synthetic rubber.

AR-15/M16

20-ROUND TACTICAL MAGAZINEOur Ultra-Reliable Magazine With Popular

Upgrades Pre-Installed

#080-000-541AV 20-Rd Tactical Mag. w/Ranger Plate, 9Z14I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 15.99

Designed for compliance where states require reduced mag capacity, our short, 5-round magazine is built to the same exacting standards as our 20- and 30-round AR mags. The magazine body has been shortened and redesigned, with a waffle-textured Extracting ExtensionTM on the underside to provides a posi-tive grasping surface pulling the mag out of the mag well. Overall length is approximately the same as a Brownells 20-round maga-zine. Because the extension is a physically separate component, these mags cannot be altered to increase round count. abSPECS: Aluminum body, gray hardcoat anodized with dry-lube coating. Molded hard polymer follower and Extracting Extension, black. Chrome silicon steel spring.

AR-15

5-ROUND MAGAZINELower-Capacity for Use in Hunting Rifles + Latest Convenience & Reliability Features

#078-000-173AV 5-Rd AR-15 Magazine, Gray Anodized, 9Z14K99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 16.99

All-steel straight body magazine is built to handle the punishment of tactical operations and service rifle competition. Feeds reliably and consistently in AR-style .308 rifles from Bushmaster, DPMS, Knights Armament Corp., Remington, and others listed below. Mag body is constructed of precision-formed, spot-welded 1050 sheet steel with a durable man-ganese phosphate finish to function properly and stand up to harsh conditions. Steel floorplate removes for cleaning; steel spring and plastic follower give you reliable, smooth feeding of every round. abSPECS: 1050 steel, manganese-phosphate finish, black. Fits DPMS Pan-ther LR series rifles (including .243, .260), Bushmaster ORC, Colt LE901, Fulton Armory, Knight SR-25, Patriot Ordnance Factory, Remington R-25, Ruger SR-762, Smith & Wesson M&P10, and Stoner SR-25. Does not fit ArmaLite® AR-10® or Rock River Arms.

DPMS AR-308

PANTHER STEEL MAGAZINESDurable & Dependable Magazines

For Your .30 Caliber AR

#231-000-207AV 19-Rd Panther LR Mag, 1C26G02 � � � $ 32.99#231-000-302AV 10-Rd Panther LR Mag, 1C27J93 � � � 34.99#231-000-301AV 4-Rd Panther LR Mag, 1C35H56 � � � � 45.99

Advanced Warf-ighter Magazines (AWM) fill the gap between the current metal and polymer magazine de-signs. These lightweight

molded polymer magazines stand up to the rough handling and extreme conditions of tactical operations, including the heat and impact of sustained full-auto fire. Permanently attached, wrap-around feed lips are made from a single piece of precision-formed, hardened steel that is PTFE coated for corrosion resistance. They help promote smooth ammo movement and will not deform when the magazine is stored fully loaded over a long period of time. Tested to withstand temperature extremes of –50°F to +180°F and a 5-foot drop fully loaded, onto concrete without impairment of function. Non-reflective exterior has molded-in ridges that improve struc-tural strength and provide a solid grasping surface. Drops free from mil-spec magwells; load to full capacity and insert into weapon with bolt closed. 30-round model fits pouches designed for standard USGI-spec magazines. Anti-tilt follower and constant-radius body curve help ensure smooth, snag-free feeding. Hard polymer base plate provides a positive gripping surface for extracting mag from tight-fitting pouches and removes easily for cleaning. abSPECS: Molded hard polymer, translucent Smoke Gray, Black, or Dark Earth. Hardened steel feed lips. Fits AR-15/M16/M4 and clones chambered for .223/5.56mm. Also fits HK416, SA80, SCAR16, and Beretta ARX160.

LANCER SYSTEMS AR-15/M16

L5AWM POLYMER MAGAZINEFull-Capacity

Polymer Magazines Tough Enough For Professional Use

#100-008-531AV L5AWM 30-Rd Mag, Smoke Gray, 1C16B85 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 18.99

#100-009-395AV L5AWM 30-Rd Mag, Blk, 1C12F87 � � � � � 15.99#100-009-396AV L5AWM 30-Rd Mag, Drk Earth,

1C13H99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.99#100-008-532AV L5AWM 20-Rd Mag, Smoke Gray,

1C16F46 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 17.99

Exceptionally rugged, combat- and compe-tition-ready 30-round magazine functions flaw-lessly and is plenty strong to stand up to hard use. The Magpul Original Equipment (MOE) GEN M2 PMAG has a one-piece body of corrosion-proof, self-lubricating, molded polymer. The seamless

body has nothing inside to impair follower movement, and the con-stant-radius internal curve further ensures smooth, unobstructed movement of the round stack. An anti-tilt follower stabilizes the stack to help prevent nose-diving and bolt-over-head failures. Magpul’s reinforced polymer withstands the heat from prolonged full-auto fire and is not harmed by most bore cleaners and solvents. Exterior ribbing provides an excellent gripping surface when hands are wet or when you’re wearing gloves. A notch for the magazine catch, rather than the traditional hole through the body, keeps dirt and debris out. The heat-treated, stainless steel spring is stress-re-lieved for optimal performance. Easy-to-grasp ledge on floorplate aids in extracting magazine from pouches; floorplate removes easily for cleaning. MagLevel model has windows on both sides of the magazine and a bright orange indicator to display ammo level. abSPECS: Reinforced molded polymer, stainless steel spring. 30-round ca-pacity. Available in Black only.

Rugged, Dependable & Nearly Indestructible

#100-003-119AV 30-Rd PMAG GEN M2 MOE, Each, 9Z11P25 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 12.30

#100-006-987AV 30-Rd PMAG GEN M2 MOE, 10-Pak, 3K111A65 � � � � � � � � � � � � � � � � � � � � � � � � � � 116.85

#100-003-144AV 30-Rd MagLevel PMAG GEN M2 MOE, Each, 9Z13C99 � � � � � � � � � � � � � � � � � � � � 15.15

#100-006-988AV 30-Rd MagLevel PMAG GEN M2 MOE, 10-Pak, 3K139G85 � � � � � � � � � � � � � � � � � 143.99

PMAG + MAGLINK KITS - Kits feature a poly-mer magazine coupler and two 30 round PMAGs. SPECS: Includes polymer coupler and two 30 round magazines.#100-015-738AV AR15/M16 MOE PMAGs +

MAGLINK, 3K39A21 � � � � � � � � � � � � � � � � $ 48.59

RANGER® FLOORPLATE - Replacement floor-plate brings the speed and controllability of the original Magpul Ranger Floorplate to both 20- and 30-round GEN M2 MOE PMAGs for fast, secure tactical magazine changes under stress. Smoothly contoured, easy-to-grasp finger loop and grooved thumb dimple aid in positive extraction from tight mag pouches and help you hang onto the empty magazine with just a finger after a tactical reload. Made from tough, reinforced polymer over-molded with soft, non-slip synthetic rubber that also cushions the magazine from impact if dropped on a hard surface. Includes molded-in para-cord hole for custom loop configurations. Easy, drop-in installation: simply remove the PMAG’s factory floorplate as you do for cleaning, and replace it with the Ranger Floorplate. Sold in 3-paks.SPECS: Reinforced polymer, rubber coated. 3 per pak. Fits all 30-rd GEN M2 PMAG models and older straight-body 20-rd PMAGs.#100-003-501AV PMAG Ranger Floorplate, Black,

9Z12D14 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 14.20

DUST COVER FOR GEN M2 PMAG - Quick-release cover seals out dirt, dust, and debris. Also alleviates feed lip deformation caused by pressure from long-term storage with a full ammo stack. Made from the same shock-resistant polymer as the PMAG body. SPECS: Reinforced molded polymer, black. Fits all 20- and 30-round GEN M2 PMAGs. Sold in 3-Paks.#100-003-508AV PMAG Dust Cover, Black,

9Z2P86 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 3.75

MAGPUL AR-15/M16

PMAG® GEN M2 MOE®

POLYMER MAGS

ab

ab

ab

Handy bundles com-bine 10 of the ever-popular Magpul P-MAG 30-round magazines in a sturdy ammo can for easy storage and transport of empty or loaded mags. The Gen M2 is the workhorse P-MAG, in service for well over 10 years and pretty much the magazine that proved even to die-hard critics that a polymer AR-15/M16 magazine was not only the equivalent to mil-spec aluminum body mags, but actually superior to them in some aspects. The Gen M3 PMAG has some upgrades (see separate listing) that some AR shooters prefer. All of our bundles come in a hard polypropylene MTM ammo can with a rubber gasket and secure compression latches that keep out moisture and dirt. Bundle 1 - standard Magpul GEN M2 PMAGs with no window. Bundle 2 - GEN M2 PMAGs with MagLevel window. Bundle 3 - Magpul GEN M3 PMAGs, no window. ab

Ten 30-Rd PMAGs, Plus a Convenient,

Weatherproof Storage Container for Them

#100-012-806AV Bundle 1 - 10 Gen M2 PMAGs + Ammo Can, 1X140F99 � � � � � � � � � � � � � $ 144.99

#100-012-807AV Bundle 2 - 10 Gen M2 MagLevel PMAGs + Ammo Can, 1X168L99 � � � � 173.99

#100-012-805AV Bundle 3 - 10 Gen M3 PMAGs + Ammo Can, 1X159M89 � � � � � � � � � � � � 163.99

AR-15/M16

MAGPUL PMAG® + AMMO CAN BUNDLES

MA

GA

ZIN

ES

& P

AR

TS

Feed your 6.5 Grendel AR-15 the right way with these purpose-built magazines from E-Lander, designed for optimum feeding of the 6.5 Grendel cartridge from mag to chamber. Constructed from stainless steel that has been heat-treated for extra strength, and fitted with a heavy-duty steel floor-

plate, a high-strength magazine spring, and an anti-tilt follower for kickass reliability. Special exterior coating resists up to 96 hours of salt spray WITHOUT corroding. Made in Israel and thoroughly tested by elite Israeli military and anti-terror units - folks who don't joke around about magazine reliability.

E-LANDER AR-15

6.5 GRENDEL MAGAZINESA Purpose-Built All-Steel Mag To Help Your

Grendel Growl

100-027-896AV 6.5 Grendel AR-15 Mag, 4-Rd, 8A21G34 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 26.35

#100-026-279AV 6.5 Grendel AR-15 Mag, 10-Rd, 8A18J99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23.99

#100-026-280AV 6.5 Grendel AR-15 Mag, 17-Rd, 8A18H99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 23.99

#100-026-281AV 6.5 Grendel AR-15 Mag, 24-Rd, 8A17P70 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 23.99

Item

AR

-15/M

16


brownells.com

The L-Plate is a replacement floorplate for current-issue USGI 30-round magazines that gives your AR mag a soft, rubber bumper pad that cushions it from damage when eject-ed on the hard ground. Low-profile – adds only 1/2" to mag when installed – yet also provides a secure grasping point for pulling mags quickly from mag pouches. Stainless steel core is overmolded with tough, durable Santoprene rubber, so the L-Plate handles all the tactical and competition abuse you can dish out. Holes through the L-Plate let you add paracord pull loops. Perfect enhancement for Brownells 20- and 30-round AR-15/M16 magazines. abSPECS: Stainless steel internal plate overmolded with Santoprene rubber, Black or Dark Earth. Molded polymer spring plate. Fits current-issue USGI-type aluminum magazines. Will not fit Magpul PMAG or EMAG. Sold in 3-paks.

MAGPUL AR-15/M16 L-PLATE™Protects USGI Mags From Impact On Hard Surfaces & Aids Extraction From

Mag Pouches

#100-007-635AV USGI L-Plate 3-Pak, Black, 9Z16E20 � � �$ 18.95#100-007-636AV USGI L-Plate 3-Pak, FDE, 9Z16B20 � � � � 18.95

Two-piece, slide-on re-placement for factory floor-

plate has a smoothly contoured, easy-to-grasp finger loop that helps you perform lightning-fast magazine changes in high stress situations. Aids in fast, positive extraction from tight mag pouches and helps you hang onto the empty magazine with just a finger after a tactical reload. Also cushions magazine from impact when dropped concrete or other hard surfaces. Made from tough, yet soft, non-slip synthetic rubber over a stainless steel core that snaps into a reinforced polymer insert to keep the Rangerplate firmly locked to the magazine. Includes molded-in para-cord hole for custom loop configurations. Sold in 3-paks and available in Black, Dark Earth and O.D. Green. abSPECS: Synthetic rubber, stainless steel, and reinforced polymer. Fits 20- and 30-round USGI-style magazines. Instructions included. Sold in 3-paks.

MAGPUL AR-15/M16

RANGER® FLOORPLATEEasier Mag Changes With

Just A Finger

#100-002-196AV Ranger Floorplate, Black, 9Z16H20 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 18.95

#100-003-720AV Ranger Floorplate, Flat Dark Earth, 9Z16E20 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18.95

#100-003-721AV Ranger Floorplate, OD Green, 9Z16I20 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 18.95

The polymer magazine that revolu-tionized magazine technology for the AR-15/M16/M4 platform just got even better. The third-generation PMAG further expands the strength, reliability, and versatility of the original PMAG. Along with all vari-ants of the AR-15/M16/M4, the GEN M3 is fully compat-ible with the HK® 416 and MR556A1, M27 IAR, British SA-80, and even the FN® SCAR™ MK 16/16S. It’s molded from a new polymer formula that delivers distinctly greater resistance to crushing and all forms of impact, with extra reinforcement in the mag catch and feed lip areas. A new-design four-way anti-tilt follower ensures even smoother feeding, even when contaminated by dust or grit. Pop-off dust cover, included, helps minimize debris intrusion and prevent damage during storage. The removable floorplate is both stronger and slimmer for easier side-by-side carry in tight mag pouches. A pen dot matrix on each side allows consistent ID marking that re-sists handling wear. PMAG 30 is available with plain, solid sides or a clear polymer window on each side that lets you see the load status at a glance. Windows are made from an all-new, advanced clear polymer formula that offers even more resistance to chemicals and impact than the original MagLevel PMAG. PMAG 30 available in Black or "Medium Coyote Tan" (MCT). PMAG 40 has solid sides. The added capacity means fewer reloads, saving precious seconds for competition shooters. PMAG 30 AR 300 B is purpose-designed for the .300 AAC Blackout cartridge with internal geometry optimized to handle the wide variety of bullet profiles used in 300 BLK ammo. External texturing is distinctly different from 5.56 PMAGs to help prevent accidentally loading a mag with 300 BLK ammo in a 5.56 rifle, with potentially disastrous results. abSPECS: Impact/crush-resistant molded hard polymer, black. 30-round models also available in Medium Coyote Tan (MCT). Compatible with AR-15/M4/M16, HK® 416, MR556A1, M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and other similar lowers. 5.56mm/.223 ammunition only.

MAGPUL AR-15/M16 PMAG® GEN M3Super-Durable &

Ultra-Dependable PMAG - Refined & Battle-Hardened By Combat

Experience

#100-011-220AV PMAG 30 GEN M3, Each, 9Z12L91 � � � $ 14.20#100-012-634AV PMAG 30 GEN M3, 10-Pak, 3K127A73 � � 134.90#100-024-603AV MCT PMAG 30 GEN M3, Ea, 9Z12C99 � � 14.20#100-011-219AV PMAG 30 GEN M3 Window, Each,

9Z15E51 � � � � � � � � � � � � � � � � � � � � � � � � � � � 17.05#100-015-262AV PMAG 30 GEN M3 Window, 10-Pak,

3K156P00 � � � � � � � � � � � � � � � � � � � � � � � � � 161.98#100-024-602AV MCT PMAG 30 GEN M3 Window,

Each, 9Z15H59 � � � � � � � � � � � � � � � � � � � � 17.05#100-012-633AV PMAG 40 GEN M3, Each, 9Z17A72 � � � 18.95#100-012-635AV PMAG 40 GEN M3, 10-Pak, 3K174L65 � � 180.03#100-023-566AV PMAG 30 AR 300 B GEN M3, Each,

9Z13K99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 15.15

Window 30-Rd

GEN M340-Rd

GEN M3

Standard 30-Rd

GEN M3

PMAG 20 GEN M3 - Brings all the GEN M3 enhancements of the 30-round model to the compact 20-round form factor. Departing from the previous PMAG 20 standard, the GEN M3 features a curved body with the same con-stant-curve geometry of the 30 round model. This not only helps ensure more reliable feeding, but it gives you a shorter mag that’s easier to handle in the prone position. Available in basic Black only.#100-011-413AV PMAG 20 GEN M3, Each, 9Z11D89 � � � � $ 13.25#100-015-263AV PMAG 20 GEN M3, 10-Pak, 3K114N99 � � 125.88

PMAG 10 GEN M3 - For the first time, there’s an ultra-com-pact 10-round PMAG model, perfect for hunting and other applications where the lowest possible magazine profile is desired. Ideal when shooting off a backpack or using a bipod. Even better, the 10-round GEN M3 has all the dura-bility, strength, and reliability enhancements of the rest of the GEN M3 line – including the anti-tilt follower and constant-curve radius of the body to aid in round-feeding. Available in basic Black only.#100-011-418AV PMAG 10 GEN M3, Each, 9Z12N19 � � � � $ 13.25#100-015-264AV PMAG 10 GEN M3, 10-Pak, 3K114G99 � � 125.88

PMAG 30 AR 300 B GEN M3 - As the name indicates, this PMAG is purpose-built for rifles chambered for .300 AAC Blackout (BLK), with internal geometry optimized to accommodate the wide variety of bullet profiles used in 300 BLK cartridges. The external ribbing is different from the 5.56 PMAG 30, providing a distinct visual and tactile difference that helps prevent accidental loading and firing of a 300 BLK round in a 5.56 rifle, which can lead to disastrous results.#100-023-566AV PMAG 30 AR 300 B GEN M3, Each,

9Z13K99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 15.15

PMAG + MAGLINK KITS - Kit features a polymer magazine coupler and two 30 round mags. Se-lect coupler and two M3 PMAGs, or coupler and two M3 Maglevel PMAGs with windows.#100-015-739AV AR15/M16 M3 PMAGs + MAGLINK ,

3K40N89 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 48.59#100-015-740AV AR15/M16 M3 MAGLEVEL PMAGs +

MAGLINK , 3K43B62 � � � � � � � � � � � � � � � 48.59

Molded polymer magazines deliver all the benefits of the AR-15/M16 PMAG GEN M3s for ultra-reliable function in a variety of AR-style rifles chambered in .308/7.62mm. They include the same anti-tilt follower, constant-curve body, low-profile ribs, snap-on dust cover, and slim floorplate. Optimized for .308/7.62mm NATO am-munition within SAAMI overall length specifications. PMAG 25 LR/SR comes with the anti-glare, transparent window on both sides and painted indicator on the spring to rapidly track remaining rounds. PMAG 25 M118 is specifically designed for enhanced reliability in rifles that accept longer than SAAMI-spec match ammunition with an OAL up to 2.830", such as Winchester .308 Match ammo. PMAG 20 LR/SR is designed specifically for military-issue MK11/M110 rifles and is less than half the weight of a standard-issue steel magazine. Like the AR-15/M16 GEN M3, both 25- and 20-round models have aggressive front and rear texture for positive grip, plus a pen dot matrix on the lower panel of each side for durable, consistent iden-tification marking. PMAG 10 LR/SR offers true 10-round capacity that does not require limiters, pins, rivets, etc. abSPECS: Impact/crush-resistant molded polymer, black. Stainless steel spring. Fits AR-style .308 rifles built for the SR-25/M110 magazine pattern, including Armalite® AR-10A, Bushmaster 308 ORC, Colt LE901-16S™, CORE Rifle Systems CORE30®, DPMS LR-308, JP Enterprises LRP-07™, Knights Armament SR-25, LaRue OBR™, Les Baer .308, LMT® .308 MWS, LWRCI™ R.E.P.R., Mega Arms MATEN, Patriot Ordnance Factory P308, Remington® Model R-25™, Ruger® SR-762™, S&W M&P10, and SIG716. Not compatible with Armalite AR-10B, Noveske N6, Springfield Armory M1A™, Rock River Arms LAR-8, FN SCAR® 17S, PTR-91, HK417, or any rifle using M14, FN FAL, or HK 91/G3 patterned mags. #100-011-564AV PMAG 25 LR/SR GEN M3 Window,

Each, 9Z20F11 � � � � � � � � � � � � � � � � � � � � � $ 21.80#100-015-747AV PMAG 25 LR/SR GEN M3 Window,

5-Pak, 3K98M70 � � � � � � � � � � � � � � � � � � � 103.55#100-015-748AV PMAG 25 LR/SR GEN M3 Window,

10-Pak, 3K189F99 � � � � � � � � � � � � � � � � � � 207.10#100-011-563AV PMAG 20 LR/SR GEN M3, Ea, 9Z17B77 � � 18.95#100-015-745AV PMAG 20 LR/SR GEN M3, 5-Pak, 3K81I48 � � 90.01#100-015-746AV PMAG 20 LR/SR GEN M3, 10-Pak,

3K162A97� � � � � � � � � � � � � � � � � � � � � � � � � � 180.03#100-011-562AV PMAG 10 LR/SR GEN M3, Ea, 9Z16L90 � � 18.00#100-015-743AV PMAG 10 LR/SR GEN M3, 5-Pak, 3K81Q52 � � 85.50#100-015-744AV PMAG 10 LR/SR GEN M3, 10-Pak,

3K163K19 � � � � � � � � � � � � � � � � � � � � � � � � � � 171.00#100-016-530AV PMAG 25 M118 LR/SR GEN M3

Window, Each, 9Z20I46 � � � � � � � � � � � � 21.80

MAGPUL AR-STYLE .308

PMAG® LR/SR GEN M3™Brings Third Generation

Of Improvements To A Variety of .308 Rifles

Replacement floorplate improves the handling of GEN M3 PMAGs and helps bring superior speed, precision and control dur-ing high-stress, tactical magazine changes. Similar to the original Magpul USGI Ranger Plate, the ergonomic design incorporates an easy-to-grasp finger loop and grooved thumb dimple that aid in positive extraction from tight mag pouches. Made of reinforced polymer with overmolded, nonslip rubber loop that also cushions the magazine from impact if dropped on hard ground. abSPECS: Reinforced polymer base, overmolded rubber loop, black. 3 per pak. 5.56 fits GEN M3 PMAGs for rifles chambered in 5.56x45 NATO/.223 Rem; 7.62 fits GEN M3 PMAGs for rifles in 7.62x51 NATO/.308 Win. Do not fit GEN M2 MOE® PMAGs, EMAG™, 30G MagLevel™, old 7.62x51 PMAGs, or any metal magazine.

MAGPUL AR-15/M16 RANGER PLATE® FOR PMAG GEN M3

Easy-To-Grasp Loop For Fast, Positive Mag Handling

#100-011-590AV 5.56 PMAG GEN M3 Ranger Plate 3-Pak, 9Z12H14 � � � � � � � � � � � � � � � � � � � � �$ 14.20

#100-014-094AV 7.62 PMAG GEN M3 Ranger Plate 3-Pak, 9Z16I20 � � � � � � � � � � � � � � � � � � � � � 18.95

Drop-in replacement follower for USGI 30-round magazines won’t tilt, so it helps prevent jams, mis-

feeds, and other magazine-related failures. Rectangular extensions at the front and rear prevent tilt of the round stack to eliminate jams caused by over-compression and binding of the spring. Self-lubri-cating polymer composition helps ensure smooth movement for easy loading and ultra-smooth feeding. Extended bolt catch makes sure bolt locks open after the last round is fired. A spring stabilizer molded into the underside keeps spring force centered no matter how many rounds are in the mag, rounded edges on the extensions for even slicker movement in the mag body, and more streamlined ramp geometry for easier travel of the round from the magazine into the chamber. abSPECS: Molded polymer, high-visibility yellow. Fits standard 30-round magazine. Instructions included. Sold in 3-paks.

MAGPUL AR-15/M16

ENHANCED SELF-LEVELING FOLLOWER

Won’t Tilt; Feeds Rounds Smoothly; Helps Prevent Magazine-Related Failures

#100-009-896AV Enhanced Self-Leveling Follower 3-Pak, Yellow, 3K4G83 � � � � � � � � � � � � � � � � $ 5.65

MA

GA

ZIN

ES &

PA

RT

S

Magpul's entry into the super-high-ca-pacity drum magazine business is configured so it's no taller than a standard 30-round mag, allowing for prone firing. Translucent window on back lets you keep track of ammo consumption. Ratcheting loading lever takes tension off the spring to make loading easier. Feed tower works with USGI stripper clips and guides, the StripLULA™ and most other loading devices. Fully load-ed drum will seat on a closed bolt, and it will lock the bolt back on the last round. Robust stainless-steel internals withstand corrosion and long-term storage while loaded with no spring fatigue or loss of reliability. Included slip-on dust cover keeps debris out of mag during storage and transport. Easy to disassemble for cleaning with a simple flat-blade screwdriver. Dot matrix pattern molded into rear of drum allows for easy marking and identification.

PMAG D-60 is compatible with "STANAG 4179" platforms cham-bered in 5.56 NATO and .223 Remington, including the AR-15, M4, M16, FN SCAR 16/16S, HK416, MR556, M27 IAR, IWI Tavor, and oth-ers. PMAG D-50 LR/SR Gen M3 is designed for 7.62x51 NATO/.308 Winchester ammunition for SR-25/M110 pattern rifles and rifles that accept DPMS LR-308 steel mags, including Remington R-25. It can accept longer-than-SAAMI-spec match ammo, up to 2.830" OAL, such as M118LR. Will work in but not optimized for bolt lock open on DPMS Gen 2 LR-308 and clones. Not compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR-8, FN SCAR 17S, PTR-91, HK417, or other rifles that use M14, FN FAL or H&K 91/G3 pattern magazines. abSPECS: Polymer, black. 7.4" (18.8cm) high, 4.1" (10.4cm) wide. Compat-ible with AR-15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IMI Tavor and others.

MAGPUL

PMAG DRUM MAGAZINESHuge Capacity Lets You Keep Sending

Rounds Down Range While Others Are Reloading!

#100-016-592AV PMAG D-60 5.56/.223 Drum Magazine, 9Z114I99 � � � � � � � � � � � � � � � $ 123.45

100-035-732AV PMAG D-50 7.62/.308 Drum Magazine, 9Z134Q00 � � � � � � � � � � � � � 142.45

Item

AR

-15

/M16


SINCE 1939

MA

GA

ZIN

ES

& P

AR

TS

Tactile Lock-Plate fit Gen M3 PMAGs to enable you to quickly and easily identify maga-zines by feel – no need to take your eyes off the target. Replaces the standard Gen M3 lock plate to provide raised knobs that protrude 1/8" through the floor plate and help you ID mags loaded with differ-ent types of ammo simply by feel. The TLP comes in Type 1 (single knob) and Type 2 (two knob) configurations. By combining the two types with a standard smooth floor plate, you can easily differentiate between mags loaded with, for example, ball, tracer, or subsonic ammo just by feel. Excellent for chest-mounted mag pouches. Knobs are tall enough (1/8") to be easily detected with gloved hand. Has NO effect on magazine reliability or performance. Reinforced molded hard polymer, just like original PMAG lock plate. TLPs are easy to install: just disassemble your mag as you do for cleaning, and reassemble with the TLP. Brownells Gun Tech™ Note: For use on standard 10-, 20- & 30-round PMAG® Gen M3™, and PMAG® AR 300B Gen M3™ magazines. Does NOT fit 40-round PMAG® 40 Gen M3™ or PMAG® LR/SR Gen M3™. ab

MAGPUL AR-15/M16

TACTILE LOCK PLATES FOR PMAGS

Identify Different Magazines By Touch

#100-026-245AV Type 1 Tactile Lock-Plates, Black 5-Pak, 9Z8G69 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 9.45

#100-026-246AV Type 1 Tactile Lock-Plates, Gray 5-Pak, 9Z8A69 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.45

#100-026-247AV Type 2 Tactile Lock-Plates, Black 5-Pak, 9Z8K69 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.45

#100-026-248AV Type 2 Tactile Lock-Plates, Gray 5-Pak, 9Z8M69 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.45

Hard polymer insert snaps into the floor-plate to limit capacity for sporting or hunting applications. Installs easily without tools and requires no permanent alteration of the maga-zine. Will not make a banned magazine legal, as capacity reduction is not permanent. Fits Magpul Gen M3 PMAGs only. 5.56 Minus 5 fits 10-, 20- and 30-rd mags. 5.56 Minus 10 fits 20- and 30-rd mags. 7.62 Minus 5 fits 10-, 20- or 25-rd mags. 7.62 Minus 10 fits 20- and 25-rd mags. ab


ROUND LIMITERS FOR GEN M3 PMAG®

#100-011-629AV 5.56 Minus 5 Limiter, 9Z11L32 � � � � � � � � $ 13.25#100-011-631AV 5.56 Minus 10 Limiter, 9Z11D32 � � � � � � 13.25#100-014-092AV 7.62 Minus 5 Limiter, 9Z11L32 � � � � � � � � 13.25#100-014-093AV 7.62 Minus 10 Limiter, 9Z11G32 � � � � � � 13.25

Drop-In Insert Temporarily Reduces Mag Capacity

Rugged, all-steel, high-capacity magazines for 9mm AR-15 conversions that use a Colt-style magazine. Metal follower won’t distort under a full load and aids smooth, reliable feeding. Hold-open feature works with ARs fitted with hold-open on the conversion block. Easy-to-remove floorplate makes disassembly fast and simple. Fits Colt and Rock River conversions with a lower receiver con-version block. abSPECS: Steel, Parkerized, dark gray (32 round), or black oxide finish (10 round & 20 round).

#620-000-021AV 32-Rd 9mm Colt-Style Mag, 2F33L14 � � $ 39.99#620-000-020AV 20-Rd 9mm Colt-Style Mag, 2F27I07 � � 31.99#620-000-024AV 10-Rd 9mm Colt-Style Mag, 2F30I52 � � 36.99

All-Steel Construction For Reliability & Durability

METALFORM AR-15/M16

9MM COLT-STYLE MAGAZINE

Self-lubricating, Delrin® loading block replaces the magazine and fol-lower for smooth, single round load-ing. Bolt holds open after every shot. CNC-machined loading tray ensures

proper cartridge alignment and reliable feeding. OBS10 provides a short, match-length loading block. OBS20 is the same size and shape as a 20-round AR-15 magazine; approved for Service Rifle competitions. abSPECS: Delrin. OBS10 - Approx. 21/2" (6.4cm) long, 7/8" (2.2cm) wide, 3" (7.6cm) high. OBS20 - Approx. 21/2" long, 7/8" wide, 5" (12.7cm) high. Fits AR-15/M16, .223 cal.

Single Round Loading For Competition & Varminting

#100-001-736AV OBS10 Bob Sled, 7A40A10 � � � � � � � � � � �$ 52.99#100-001-737AV OBS20 Bob Sled, 7A40I88 � � � � � � � � � � � 48.99

ORIGINAL BOB SLED PRODUCTS AR-15/M16

ORIGINAL BOB SLED

Polymer80's magazine features a heavy-duty, reinforced polymer body, with an inno-vative floorplate design that ensures it'll con-sistently hold a full 10 rounds of .50 Beowulf. At the same time, this mag extremely strong - ready to take the knocks and bumps of com-petition shooting - AND also lightweight. Most importantly, the P80 team designed this magazine expressly for the unique size, shape, and characteristics of .50 Beowulf cartridge. It’s not a modified mag meant for a different round that was "lashed up" to sort of work for .50 Beowulf. When you lock this into your Big 50’s magwell, you can be sure it'll deliver all 10 rounds reliably, without hang-ups, jams, or leaving you high and dry with a disabled rifle. Available in Black (BLK), Flat Dark Earth (FDE) or O.D. Green (ODG) to match your Polymer80 "AR-50" receiver. ab

POLYMER 80 AR-15/AR-50

10-RD .50 BEOWULF MAGAZINEThe Reliable Mag You Want in

Your Big Bore AR

#100-030-124AV 10-Rd .50 Beowulf Magazine, BLK, 9D10P50 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 12.00

#100-030-125AV 10-Rd .50 Beowulf Magazine, FDE, 9D10G50 � � � � � � � � � � � � � � � � � � � � � � � � � � 12.00

#100-030-126AV 10-Rd .50 Beowulf Magazine, ODG, 9D10E50 � � � � � � � � � � � � � � � � � � � � � � � � � � 12.00

Make the most of your 6.8mm chambered AR with long-wearing, ex-tra-tough steel magazines. Hardened steel bodies with tempered feed lips hold their shape and won’t flex, bend, or deform. Tempered steel springs help maintain reliable feeding and function even with the heavier 6.8mm cartridge.

Lightweight, Magpul brand, nylon composite followers are marked 6.8 to avoid confusion with AR magazines for other calibers. Avail-able in 10-, 15-, or 25-round capacity. abSPECS: Steel, blue. Fits. AR-15/M16 rifles chambered for 6.8 x 43mm Rem. SPC.

PRECISION REFLEX, INC. AR-15/M16

6.8MM MAGAZINEDurable Steel Magazines Resist Wear, Maintain

Their Shape

#714-000-002AV 10-Round 6.8mm Mag, 4A38P99 � � � $ 38.99#714-000-010AV 15-Round 6.8mm Mag, 4A33B39 � � � 39.99#714-000-001AV 25-Round 6.8mm Mag, 4A34K13 � � � 40.99

Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated,

precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 cal.), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. abSPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55/8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 cal.), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite® AR-10®, Rock River Arms, or any rifle using an FN/FAL magazine.

PRO MAG AR-STYLE .308

20-ROUND MAGAZINEFits Most AR-Style .308 Rifle Platforms

#687-000-069AV AR-Style .308 Magazine, 7H20I38 � � � $ 24.99

High-quality, factory original magazine ensures smooth operation and feeding because it’s the same magazine that came with your rifle. Built with rugged, self-lubricating molded polymer components, in-cluding one-piece body, follower, and removable floorplate, plus a precision wound steel spring. Load-assist button for fast reloads, and viewing slot to show you exactly how many rounds you have left. abSPECS: Reinforced injection-molded polymer. Approx. 81/4" (21cm)" long x 7/8" (2.2cm) thick. Fits M&P15-22. 10-Rd available with round-count lim-ited full-length mag body or compact short body (SB).

SMITH & WESSON M&P15-22

REPLACEMENT MAGAZINESRugged, Factory Magazines For

Consistent, Reliable Feeding

#940-001-027AV M&P15-22 Magazine, 25-Rd, 4Z22A35 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99

#940-001-044AV M&P15-22 Magazine, 10-Rd, 4Z18B89 � � � � � � � � � � � � � � � � � � � � � � � � � � 24.99

#940-001-043AV M&P15-22 Magazine, 10-Rd SB, 4Z19G41 � � � � � � � � � � � � � � � � � � � � � � � � � � 23.99

10-Rd Short Body

Ultra-high capacity magazine keeps your rifle running longer between mag changes during com-petition or tactical operations. These magazines meet NATO STANAG 4179 specifications and are compatible with all rifles that accept AR-15/M16/M4 magazines. Less than two standard magazines wide, so it’s easy to hold and handle with one hand - and fits most dual-mag pouches for 30-round magazines. Weight is centered under the weapon to help you maintain a normal shooting grip and stance. Seats fully loaded on a closed bolt. “Nesting”

nylon followers require no lubrication and fully support the round stack to aid in reliable feeding. Cadmium coating on springs reduces friction and resists corrosion. abSPECS: Aluminum body, hardcoat anodized, matte gray finish. Nylon fol-lowers. Cadmium-coated springs. 8.7" (22.1cm) tall, 1.66" (4.2cm) wide at base. 6.4 oz. (181g) wt. empty, 2 lbs. (907g) wt. fully loaded.

SUREFIRE AR-15/M16

60-ROUND MAGAZINEMore Firepower & Fewer Mag Changes

#152-000-096AV Surefire 60-Rd Magazine, 6H119D99 � � � � � � � � � � � � � � � � � � � � � � � � $ 134.10

Easy-to-install adapter converts the reliable, easy-to-load Smith & Wesson M&P15-22 magazine for use in an AR-

15 fitted with a dedicated .22 LR upper or a CMMG conversion unit. Unique design has an independent bolt catch that locks the bolt back on the last shot and keeps it there when the magazine is re-moved, just like on a standard centerfire AR-15. This allows easier reloads and provides a visual indicator that the gun is empty after the last round is fired. Will not fit DPMS, Chiappa, and Tactical Solu-tions units. abSPECS: 6061 aluminum body, natural finish. 1018 steel bolt catch, case-hardened.

BOONIE PACKER PRODUCTS AR-15

S&W RIMFIRE MAGAZINE ADAPTERLets You Use S&W M&P15-22 Mags With Your CMMG

.22 Conversion

#100-012-169AV Magazine Adapter, 7K49M99 � � � � � � � � $ 49.99

Easy to install, one-piece insert ma-chined from solid aluminum bar stock rests on top of factory magazine follower to allow single shot load-ing of long cartridges with heavy varmint bullets. Prevents bullet or case damage caused by normal feeding from magazine. Perfect for precision target competition or varmint hunting. Fits Brownells 20- and 30-round magazines and similar USGI-type mags. No need to disassemble magazine to install because follower slides in from the top. Locks bolt open after the shot. Clear anodized to resist wear; silver color contrasts with plastic factory follower to give you instant visual recognition that the insert is installed. abSPECS: Aluminum, anodized, natural silver finish. Fits USGI-style metal magazines.

Sinclair AR-15

ALUMINUM SINGLE SHOT FOLLOWERAllows Single Loading Of Long

Varmint/Target Cartridges

#749-002-692AV Single Shot Follower, 8H16D71 � � � � � � $ 19.99

Tough, molded nylon magazine coupler binds a backup magazine directly to the mag in the gun for lightning fast tactical reloads without moving your trigger hand. Three, steel bolts let you adjust retention force, so the magazines won’t slip out even during vigorous combat maneuvers. Side-by-side configuration with staggered heights, plus fixed standoff points between the compart-ments further ensure the magazines won’t shift position or rattle. Includes a Top Round Protec-tor (TRP) to protect the feed lips of the backup mag, prevent accidental dislodgement of the top round, and keep out dirt. TRP instantly detaches by

applying downward thumb pressure on the release tab while push-ing forward. Rubber retention strap keeps TRP from getting lost. abSPECS: Molded nylon, black, with steel tension adjustment bolts. 23/4" (7cm) long, 27/16" (6.2cm) wide, 31/4" (8.3cm) high.

AR-15/M16

MAGAZINE COUPLERKeeps A Spare Mag Ready

For An Instant Reload

Magazines not included

#080-000-511AV Mag Coupler For AR-15, 9B17E79 � � � � $ 18.99

MA

GA

ZIN

E A

CC

ESS

OR

IES

AR

-15/M

16


brownells.com

Lightweight, low-profile clamping system attaches the backup magazine directly to the one in the gun for ultra-fast reloads. Holds two 20- or 30-round Magpul PMAGs side by-side, with a tension-adjustable coupling that prevents the spare magazine from shifting. Precision-ma-chined from billet aluminum with minimal bulk and smooth, radiused edges that won’t abrade the hand. Rugged and reliable enough for tactical and competition use. abSPECS: Tempered aluminum, hardcoat anodized, matte black. Fits all models of 20- and 30-round .223/5.56mm Magpul PMAGs.

MERCOB SECURITY GROUP AR-15/M16

PMAG® MAG GRIPSecurely Clamps Two PMAGs For Fast Reloads

In Combat Or Competition

#100-004-542AV PMAG Mag Grip, 8K19H15 � � � � � � � � � � $ 24.99

Heavy-duty magazine pouch made from top-quality mil-spec materials slings over your shoulder, so you can easily carry up to eight, fully loaded magazines while on the move. Con-structed of woven, water-repelling ballistic nylon that resists tearing and fraying. Heavy-duty stitching won’t give way under stress, and all exposed edges are protected with tape binding. Adjustable carry strap of extra-tough nylon webbing lets you position the pouch exactly where you need it for fast reloads. Each compartment has a separate flap, so you won’t expose the other mags to the elements when you retrieve one. Generously proportioned hook-and-loop fasteners keep the flaps securely closed, yet release easily when you need a fast reload. Grommetted

drain holes ensure mags don’t get water logged when you’re on patrol in the rain. Large pocket behind the mags, with full-width hook-and-loop closure, provides storage for maps or other flat items. .223 holds eight (8) 30-round .223/5.56mm AR-15/M16/M4 magazines. Has plenty of length to accommodate magazines fitted with the Magpul Ranger® Floorplate, including Brownells Tactical Magazines. 9mm holds six (6) UZI-style 9mm stick mags. 7.62 holds eight (8) 20-round magazines for M14/M1A, FN FAL, HK91, SCAR-H (SCAR 17), and Magpul 7.62 PMAGs. abSPECS: Heavy duty ballistic nylon, Coyote Brown or O.D. Green. .223 – 121/2" (31.8cm) long 8" (20.3cm) high. Holds eight (8) 30-round AR-15/M16/M4 magazines. 9mm – 121/2" long 91/2" (24.1cm) high. Holds six (6) UZI-style 9mm stick magazines. 7.62 - 14" long x 7" high. Holds eight (8) 20-round 7.62/.308 magazines, including M14/M1A, FN FAL, HK91, SCAR-H (SCAR 17), and Magpul 7.62 PMAGs.

OLONGAPO OUTFITTERS AR-15/M16

GRAB & GO MAGAZINE POUCHHolds Plenty Of Spare Mags

At The Ready; Sling Over Shoulder For Easy Carry


#100-004-231AV .223 Grab & Go Pouch, Coyote, 3B49L89 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 61.99

#100-004-232AV .223 Grab & Go Pouch, O.D. Green, 3B47Q77 � � � � � � � � � � � � � � � � � � � � � � � � � � 58.99

#100-004-233AV 9mm Grab & Go Pouch, Coyote, 3B54C46 � � � � � � � � � � � � � � � � � � � � � � � � � � 64.99

#100-004-234AV 9mm Grab & Go Pouch, O.D. Green, 3B55K56 � � � � � � � � � � � � � � � � � � � � � � � � � � 68.99

#100-012-179AV 7.62 Grab & Go Pouch, Coyote, 3B48A64 � � � � � � � � � � � � � � � � � � � � � � � � � � 60.99

#100-012-180AV 7.62 Grab & Go Pouch, O.D. Green, 3B49J89 � � � � � � � � � � � � � � � � � � � � � � � � � � 61.99

7.62 G&G in O.D. Green

The product that launched Magpul! Thermo-plastic loop installed on the base of a rifle or subgun magazine provides an easy-to-grasp handle for un-surpassed speed and controllability during high stress, tactical mag-azine changes. Recessed, rough texture provides positive gripping surface under slippery or wet conditions. Finger loop acts as shock absorber to protect magazine from damage when dropped from rifle. Silences magazines stored next to each other in pouch. abSPECS: Industrial thermoplastic, black, flat dark earth or olive drab de-pending on model. Impervious to most chemical compounds. Pak of 3. 5.56 NATO fits 20- and 30-round AR-15/M16. 7.62 NATO fits AR-Style .308. 9mm Subgun fits Colt SMG.

MAGPUL INDUSTRIES AR-15/M16

THE ORIGINAL MAGPUL®

Fast, Fumble-Free Mag Changes

#100-000-308AV 5.56 NATO Magpul, Black, 9Z8D08 � � � �$ 9.45#100-003-424AV 5.56 NATO Magpul, Flat Dark Earth,

9Z8E08 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.45#100-003-425AV 5.56 NATO Magpul, OD Green,

9Z8H08 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.45#100-000-309AV 7.62 Magpul, Black, 9Z8E08 � � � � � � � � � � � 9.45#100-000-310AV 9mm Subgun Magpul, Black, 9Z8C08 � � 9.45

Tough, lightweight, reinforced, polymer loader/unloader saves fingers, thumbs, and wasted time. Extends magazine life and lessens wear and tear on feed lips. Staggered, triangular pieces of plastic securely grasp rounds for effort-less loading/unloading when you move the lever back and forth. Fits in your pocket.SPECS: Reinforced polymer. AR-15/M16 fits 10, 20, 30, 100-round .223/5.56mm magazines. AR-308 fits 5, 10, 20, 25 round magazines for DPMS LR-308 and Knight's Armament SR-25, including Magpul, POF USA, Lancer, LaRue Tactical, C-Products, and Oberland Arms. AR-10B® Gen II fits 5, 10, 15, 20, 25-round Armalite® AR10B® Gen. II metal magazines. Colt SMG fits Colt SMG 9mm-type metal and polymer magazines.

BUTLER CREEK AR-15/M16

L.U.L.A. MAGAZINE LOADER/UNLOADER

Load & Unload Magazines Fast; Saves Overworked Fingers & Thumbs

Magazine not in-cluded.

#100-000-637AV AR-15/M16 Mag Loader, 9A25G99 � � � $ 25.99#100-014-116AV AR-308 Magazine Loader, 9A28I31 � � 28.99#100-014-117AV AR-10B Gen II Magazine Loader,

9A28I31 � � � � � � � � � � � � � � � � � � � � � � � � � � � 28.99#593-000-044AV Colt SMG Mag Loader, 9A28C31 � � � � � 28.99

Flexible rubber cover snaps on top of the magazine to keep out dust, dirt, debris, moisture, and other contaminants that can impair function and cause feeding failures. Protects feed lips and the top round in the ammo stack from dings and dents. abSPECS: Rubber, black. 10 per pak. Fits any mil-spec or aftermarket .223/5.56mm AR-15/M16 magazine.

TAPCO AR-15/M16

MAGAZINE DUST COVERProtects Feed Lips From Damage & Ammo

Inside From Dust, Dirt & Moisture

Magazine not included

#100-005-440AV AR-15/M16 Magazine Dust Covers, 10-pak, 5A8F77 � � � � � � � � � � � � � � � � � � � � � $ 11.39

Lightweight, minimal-profile coupling sys-tem securely clamps two tactical rifle magazines together so the backup mag is right next to the one in the gun for exceptionally fast mag changes under stress. Universal design works with mags for a variety of .223/5.56mm and 7.62 x 39 weap-ons, including AR-15/M16, AK-47, Galil, H&K 93, Ruger® Mini-14®, and SIG 556. Durable, reinforced molded polymer clamps resist the rigors of tacti-cal operations, including heat, cold, and impact, while steel bolts provide tensioning force for se-cure, non-slip, rattle-free grasp of the mag body. Smooth surface and rounded edges prevent snag-ging on BDUs, sling, foliage, or other gear. Installs in seconds with a standard slot-head screwdriver; no permanent alterations to magazines. Sold in 2-Paks. For an ultra-secure instal-lation, use both couplers on one pair of mags; for less strenuous operations, one clamp may be used.SPECS: Reinforced molded polymer composite, black, steel bolts. Fits USGI-style metal AR-15/M16 magazines, AK-47/AKM, Galil 7.62x39 and 5.54x39, H&K 33/53/93, Ruger Mini-14, and SIG 540/543/550/551/552/553/556. Sold in 2 paks.

MAKO

TACTICAL RIFLE MAGAZINE COUPLERClamps A Spare Mag To The One In The Gun

For Ultra-Fast Mag Changes


#100-003-844AV Universal Mag Coupler, 2-pak, 2B5C05 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 14.99

Tough, molded polymer magazine pouch lets you carry an extra 20- or 30-round AR-15/M16 magazine, including a Magpul PMAG, on

your duty belt behind any standard pistol magazine pouch. Provides a single ammunition management point, saves valuable belt space, and ensures you have a critical rifle reload with you when you need it. Open-top design and the adjustable, spring-loaded tension system holds the magazine securely, while allowing fast extraction under stress. Set screws let you adjust mag retention force and prevent shifting on belt. Can be worn in the vertical or horizontal position on duty belts up to 21/4" wide. abSPECS: Molded polymer, black. 41/4" (10.8cm) tall, 31/2" (8.9cm) wide, 13/4"(4.4cm) thick. Fits mil-spec 20- and 30-round AR-15/M16 magazines and similar-dimensioned commercial magazines, including PMAGs.

CENTER MASS AR-15/M16

PATROL RIFLE INTEGRATED MAG POUCH

Ensures You Have A Critical Rifle Reload In An Emergency

#100-004-396AV Integrated Mag Pouch, 1C39C22 � � � � $ 45.99

Durable, corrosion-, weather- and impact-resistant reinforced nylon coupler lets you carry two 30-round Magpul® PMAGs on your weapon for super-fast reloads. Securely clamps the back-up magazine to the one in the gun for fast ac-cess. Steel cross-bolt provides plenty of tension-ing force for a secure, rattle-free grasp of both mag bodies. Deep surface ribbing gives you a solid, non-slip purchase, while rounded outside edges resist snagging on clothes and other gear. Installs in seconds with a standard slot-head screwdriver; requires no permanent alterations to magazines. abSPECS: Glass-reinforced nylon polymer, black, with steel hardware. Fits only Generation II PMAGs manufactured after July 2009 (see date stamp on mag body) with four exterior ribs and green follower.

DREAM PLASTICS AR-15/M16

30-ROUND PMAG COUPLERClamps Together Two Mags For Twice The

Firepower At Your Fingertips

Magazines Not Included

#100-004-970AV Magpul PMAG Coupler, 1D14K98 � � � � �$ 18.69

Reinforced polymer magazine coupler allows you to clamp two 30-round PMAGs to each other for super-fast reloads because you’ll always have an additional 30 rounds with the gun. The two polymer links secured by two steel bolts hold both mags firmly, with no rattling or play. Designed for

use with current-production PMAG and MagLevel PMAG only. abSPECS: Reinforced hard polymer, matte black. Fits current-production 30-round PMAG, including Gen M2 MOE and Gen M3. Not compatible with the first-generation PMAG with black follower, 20-round PMAG, EMAG, PMAG 30G, or 7.62/.308 PMAG.

MAGPUL AR-16/M16

MAGLINK FOR PMAG®

Links Two 30-Round PMAGs Together So You Always Have A Reload With The Weapon

#100-009-583AV Magpul MagLink, 9Z15N35 � � � � � � � � � � $ 17.05

View our How-To Video Guides at

brownells.com

Don’t lose precious seconds in compe-tition or combat fumbling for a spare mag-azine during a reload. This rugged speed loading system clamps directly to the lower receiver of any AR-15/M16 rifle or carbine and securely holds a second, fully loaded magazine alongside the mag well for super-fast mag changes. More reliable and easier to use than improvised methods, like tap-ing two magazines together, that can cause malfunctions at critical moments. Closed-top design protects the spare mag from rain, dirt, dust, and debris and prevents the top round from jumping forward under recoil. Inde-pendent release system lets you drop the spare mag and the mag in the weapon separately to allow tactical reloads and greater flexibility in clearing malfunctions. Installation requires no permanent altera-tions to receiver or mag well. Designed for mil-spec receivers; may not fit custom billet receivers. Standard Steel model has Boonie Packer's cleverly-designed Bolt Catch Extension (BCE) for mount-ing it directly to the factory bolt catch. Lets you release the bolt, with or without the Redi-Mag attached to the gun, simply by slapping the BCE with an open palm. Machined Aluminum model offers lighter weight and a hinged mounting bracket for easy attachment to your rifle; does not have BCE. abSPECS: Steel, Parkerized, or 6061 T6 aluminum, hardcoat anodized, both dark gray, with reinforced molded polymer BCE and spacer. 31/2" (8.9cm) long, 21/2" (6.4cm) wide, 23/4" (7cm) high. Weight: 8.4 oz. (234g) (steel), 5.6 oz. (159 g) (aluminum). Fits AR-15/M16/M4 rifles and carbines with standard forged lower receiver.

BOONIE PACKER AR-15/M16

IMPROVED REDI-MAGHolds A Spare Magazine On The Receiver For Ultra-Fast Reloads

Mag Not Included

STOCK # BCE MODEL PRICE#100-004-455AV YES Standard Steel 7K85D55 $ 96.99#100-009-308AV NO Machined Aluminum 7K132J52 $ 147.99

MA

GA

ZIN

E A

CC

ESSO

RIE

S

AR

-15

/M16


SINCE 1939

Durable, black, polycarbonate mag well is oversized and ultra smooth on the inside

for easy, friction-free magazine insertion. Easy-to-install, drop-in unit clamps together with three hex screws and makes it possible to change magazines without ever taking your eyes off your target! Black, matte finish matches most AR-15s. abSPECS: Polycarbonate, black, matte finish. Approximately 311/16" (9.4cm) wide, 115/16" (2.4cm) tall. 2.4 oz. (68 g) wt.

ARREDONDO MFG.

AR-15 MAG WELLExtra-Big Mag Well Lets You Insert

Magazines On Feel Alone

#069-000-007AV AR-15 Mag Well, 9F41L99 � � � � � � � � � � � �$ 43.99

Benchtop mag loader charges any AR magazine - aluminum, polymer, even high-capacity Beta mags - in seconds! Dump up to 50 rounds right from the box into the AR Mag’s res-ervoir, and load 5 rounds into the magazine every time you push the plunger. Spring-loaded carrier automatically advances the next row of 5 rounds into the loading chute until the mag is fully loaded. Comes with a transfer tray that lets you stage bulk ammo for dump-ing into the charger. SPECS: Polymer construction. Works with .223, 5.56 NATO, or .204 Ruger ammunition.

Quickly Fills Up ANY AR-15 Magazine

#100-014-051AV AR Mag Charger, 7A55C57 � � � � � � � � � � $ 56.99

CALDWELL AR-15/M16

AR MAG CHARGER

Easy-to-use loader snaps over top of any AR-15/M16 magazine to help you quickly and effi-ciently insert rounds without pinching, bruising, or

cutting fingers and thumbs. Lets you load up mags fast, so you spend more precious range time shooting. Wide thumb pad provides plenty of leverage to compress the magazine spring, even when close to full capacity. Quick-release tab locks into mag catch notch to prevent unwanted movement during loading. Rug-ged, molded polymer construction with a textured, no-slip surface.SPECS: Molded polymer, black. Fits any capacity AR-15/M16 and STANAG-compatible magazines in .223/5.56mm or 6.8mm. Also fits Ruger® Mini-14®.


MAGAZINE LOADERRefill Any Capacity Magazine Quickly—No

Bruised Fingers

Magazine Not Included

#100-004-133AV AR-15/M16 Mag Loader, 6C12Q43 � � � �$ 13.49

Thumb-saving, lightweight magazine loader provides fast, painless 30-round magazine load-ing in less than 13 seconds. Accepts 10-round stripper clips or loose rounds for easy loading of 10-, 20-, and 30-round magazines, and is capable of unloading a 30-round magazine in 15 seconds. Ambidextrous, grooved thumb slide provides a non-slip grip for right- or left-hand loading. Constructed of durable, reinforced polymer for dependable operation under extreme field conditions. Fits all AR 15/M16 metal and plastic magazines.SPECS: Polymer, black. 515/16" (13.5cm) long, 11/8" (2.8cm) wide, 13/16" (3cm) high. 1.2 oz. (34g) weight. Accepts 10-round stripper clips or loose rounds. Fits all AR-15/M16 magazines.

MAGLULA AR-15/M16

STRIPLULA™Easy, Painless Way To Load AR-15/M16

Magazines In The Field

#100-003-330AV AR-15/M16 Striplula, 9A25Q99 � � � � � � $ 25.99

Compact, economical, easy-to-use loader snaps on the top of an

AR-15/M16 magazine to save fingers and thumbs from the beating they take from loading mags by hand. Slide individual rounds on the included 10-round stripper clips, insert a loaded clip in the loader, then push down on the top round to insert all 10 without misalign-ment or damage to the bullet tips. Includes three, 10-round stripper clips; additional stripper clips sold separately. abSPECS: Zytel nylon, black. Kit includes one loader and 3 stripper clips. Fits all AR-15/M16 type .223/5.56mm magazines.

Speeds Magazine Loading & Preserves Fingers

#100-005-863AV Magazine Charger, 7C7N99 � � � � � � � � � � � $ 9.79#100-005-864AV Stripper Clip, 7C3C12 � � � � � � � � � � � � � � � � 4.29

THERMOLD AR-15/M16

MAGAZINE CHARGER

MA

GA

ZIN

E A

CC

ESS

OR

IES

Self-illuminating, green, Trijicon® Tri-tium inserts provide an easy-to-acquire, 3-dot sight picture for fast target acquisition in low-light condi-tions. Inserts appear as white dots for enhanced targeting in normal daylight conditions. Ghost ring rear aperture features dual side-on-side dots for easy sight alignment, and the elevation-adjustable, standard-width front blade is a drop-in replacement for an A2-type front post with a single green lamp for an instantly recognizable six o clock hold. A block-out locking ring helps maintain your careful front sight adjustments. abSPECS: Machined steel, matte black finish. Front Blade - .090" (2.3mm) wide, .250" (6.3mm) high. Rear Sight - battle aperture .083" (2.1mm) dia.; ghost ring aperture .207" (5.2mm) dia. Fits AR-15/M16 equipped with A2-type elevation-adjustable rear sights. Kit includes rear sight aperture, front sight blade with lock ring, front sight detent, and stainless steel four- and five-prong A2 sight adjustment wrench.

AMERIGLO AR-15/M16

NIGHT SIGHT SETEasy-To-See, Glowing Tritium Dots For

Fast Targeting In Low Light

#100-004-185AV AR-15/M16 Night Sight Set, 4K65E51 � � $ 74.99

Replacement front sight post uses a light-gathering fiber optic rod to produce a bright, easy-to-acquire dot in all light conditions. Easily replaces the post in A1- and A2-style sights, no gunsmithing re-quired. Unique, U-shaped design of rod gathers far more light than a standard straight rod, perfect for low-light situations. Kit comes with two green and two red interchangeable rods that are easily removed and installed using the included removal tool, so you can customize the sight picture or replace a damaged rod quickly. Fully adjustable in 180° increments using supplied sight wrench, for a total elevation adjustment of up to 2.5" at 100 yards. abSPECS: Black steel post with 2 green and 2 red fiber optic rods. Includes replacement detent pin, sight wrench, optic rod removal tool, carrying case, and instructions.#638-000-081AV AR-15 Fiber Optic Front Sght, 8C19Q49 � � $ 21.99

Bright Fiber Optic For Easy Aiming

HIVIZ AR-15/M16

FIBER OPTIC FRONT SIGHT

Steel A2 square front sight post has the 4-notch base currently in use on military rifles. abSPECS: Steel, matte black finish. .267" (6.7mm) tall, .07" (1.7mm) wide.

DPMS AR15/M16

FRONT SIGHT POSTStraight Mil-Spec Replacement

#231-000-128AV A2 Front Sight, 1C4C37 � � � � � � � � � � � � � � $ 4.49

Seven, A2-style, front posts let you choose the right sight picture for improved hunting and target shooting

accuracy. Complete set of 7 blades: tapered, round post with .072" (1.8mm) ball top; tapered post with .052" (1.3mm) ball top; tapered post with .034" (.87mm) ball top; square post with .072" (1.8mm) square top; square post with .052" (1.3mm) square top; square post with .034" (.87mm) square top; and two-way .072" square post with V-notch top and inverted V (point up) top. abSPECS: Steel, black, matte finish.

KNS PRECISION AR-15

FRONT SIGHT POST PACK

Pick The Exact Blade You Need For Fast, Accurate Sighting

#923-000-038AV AR-15 A2 Front Sight Pack, 3B24K80 � �$ 29.99

CNC machined sight post has integral crosshairs to provide quick, consistent sight alignment for im-proved accuracy at any range. Large diameter aper-ture offers a wide field of view that does not obscure target; gives a sight picture that’s like looking through a scope. Compatible with factory rear sights and variable-diopter target sights. A .250" hood shields crosshair from reflected light and offers excellent protection of crosshairs for duty use. Fits AR-15, M16 and AR-style .308 rifles with standard AR-15 sight housings. STD has thin wire crosshair. Duplex is styled after the popular duplex scope reticle to improve low light visibility. abSPECS: Brass, black, matte finish. Beryllium crosshairs, heat treated. STD - .010" (.25mm) wire, Duplex .010"/.020" (.5mm) wire. .240" (6.1mm) dia. aperture.


KNS PRECISION FRONT SIGHTCrosshair Sight Gives Scope-Like Sight Picture

STOCK # STYLE TYPE PRICE#923-015-002AV STD AR-15 Hood 3B22I68 $ 27.99#923-000-002AV Duplex AR-15 Hood 3B22N95 $ 26.99

Replacement sights equipped with Mepro-light’s standard, Tritium inserts guaranteed by the manufacturer for 12 years. Rear sight features a large, 2-dot peep with Tritium inserts for low light shooting, plus a smaller diameter peep sight without in-serts for improved accuracy at longer ranges. Front post has single, short Tritium stripe. SPECS: Steel sight body, blued. Tritium inserts. Set - Includes front and rear sight. Fits AR-15/M16 A1/A2 sight configurations.

MEPROLIGHT AR-15/M16

TRITIUM SIGHTSFor Low Light Tactical Operations

#387-304-117AV Front/Rear Sight Set, 2B78Q08� � � � � � $ 92.99#387-304-115AV Front Sight, only, 2B37G85 � � � � � � � � � 44.99

Adjustable, fiber optic, front sight creates a bright, easy-to-see dot for short- or long-range shooting. Steel, sight blade secures a fiber optic rod with small

and large diameter ends (dots). Custom, detent plunger allows easy blade switch between large dot to small. Precise, 5/8" MOA click ad-justments (Mil-Spec is 11/4" MOA per click). Replaces the issue, front sight using the provided tools. Comes with red, green, and amber fiber optic rods. Military - standard, mil-spec width blade with .040" diameter fiber optic rod. Match - medium width blade with .030" diameter rod for long ranges. abSPECS: Steel, blued. Military - .070" (1.8mm) wide blade, .040" (1mm) dia. rod. Match - .060" (1.5mm) wide blade, .030" (.75mm) dia. rod.

MOUNTING SOLUTIONS AR-15/M16

SIGHTLINK™ FRONT SIGHTEasy-To-See Dot For Long & Short Range Shooting

#100-001-463AV Military AR-15 Front Sight, 1K42D35 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 50.99

#100-001-464AV Match AR-15 Front Sight, 1K41N68 � � � 50.99

The ultimate, self-luminous AR-15 sight. Improves sight pickup and visibil-ity during low-light hours when game is most active. All sights include rugged sapphire crystal, self-illuminating Tritium lamps for a bright, well-defined aiming point and extra-long life. Lamps guaranteed by the manufacturer to remain self-luminous for 12 years.SPECS: Steel body, blued. Tritium insert. Includes front and rear sight unless shown in chart.

TRIJICON AR-15/M16

TRITIUM SIGHTSelf-Luminous Replacement Sights

STOCK # FITS PRICE#892-415-125AV AR-15 A1/A2 front only 2H53A37 $ 55.99#892-415-025AV AR-15 A1/A2 with 10-36

windage screws2H73L47 $ 80.99

Easy-to-use replacement for standard A2 rear aperture allows the shooter to engage targets at ranges up to 300 yards without changing the aperture, eliminating the need to reposi-tion your head or take hands off weapon. The .095" wide notch at the top of the dual-function aperture face provides point-of-impact zero that lets the operator engage close range targets with ease by simply shooting to the point of aim like a pistol. Takes the thinking out of the equation for fast, instinctive target acquisition. Use the .070" diameter aperture below the notch for precise long-range target engagement. Flip the CSAT face down to reveal a standard, A2-style .200" diameter peep for close-range only operations. CSAT is easy to zero; even easier to train shooters to use. Zero the notch at 7 yards by aligning the front sight in the notch like a handgun sight, then move back to 100 yards and zero the aperture. Fire test shots sighted through the notch in 5-yard intervals, starting at 10-yards to determine where offset sets in; that’s the range where you should transition to the peep hole. Precision machined from steel, with a serrated rear face that minimizes glare, and a dished area around the peep hole that helps the eye acquire the front sight quickly. Adjusts for windage and elevation just like a standard A2 peep. Developed by Paul Howe, combat shooting trainer and retired U.S. Army assault team leader, sniper, and senior instructor. abSPECS: Steel, matte black finish. Fits A2-style AR-15/M16 rear sights.

XS SIGHT SYSTEMS AR-15/M16

CSAT COMBAT SIGHTSwitch From CQB Mode To Long-Range

Targeting Without Changing The Aperture

#006-000-163AV CSAT Combat Rear Sight, 6K35B92 � $ 39.60

SIG

HT

S

AR

-15/M

16


brownells.com

Lightweight, streamlined backup sights are built on the K.I.S.S. principle to ensure the tactical operator has a reliable, always-deployed sighting option if the main optic fails. One-piece design slides easily on a MIL-STD 1913 rail and clamps se-curely with a single machine screw. Rounded edges and recessed attachment screws resist snagging on other gear. A1.5 Rear Sight combines the windage adjustment drum of the original USGI A1 rear sight and a flip-up A2 aperture with large .190" peep for close range and .060" peep for long- range targeting. Compact profile doesn’t hang over the rear of the receiver to interfere with the shooter’s ac-cess to the charging handle. Front Sight has a standard, elevation-adjustable A2 post and a smooth, concave radius on the sides of the housing to provide a natural resting place for the support hand thumb to enable quick activation of a compact weapon-light or laser sight. abSPECS: 6061 T6 aluminum, Type III hardcoat anodized, matte black. A1.5 Rear Sight -13/8" (3.5cm) long, 11/4" (3.2cm) wide, 15/8" (4.1cm) high from top of receiver rail to top of sight housing. 1.7 oz. (49g) weight. Front Sight - 1" (2.5cm) long, 11/8" (2.8cm) wide, 13/4" (4.5cm) high from top of receiver rail to top of sight housing. 1.1 oz. (30g) weight. For proper regulation with A1.5 or USGI A2-type rear sight, must be mounted on a handguard rail or railed gas block that is the same height as the receiver rail.


FIXED BACKUP SIGHTSRugged, Reliable, Always-Deployed Relief Sighting

#100-004-457AV A1.5 Rear Sight, 8K69L00 � � � � � � � � � � � $ 69.00#100-004-759AV Fixed Front Sight, 8K60K00 � � � � � � � � � 60.00

Front and rear flip-up sights are made of tough, metal-reinforced polymer with steel apertures for both light weight and durability. Sights snap up into position instantly under

robust spring pressure when the finger pad is depressed, and can be easily retracted to the folded position with one hand. Front sight is designed to be mounted to a handguard rail on the same plane as the receiver rail; it is not designed to be mounted on a gas block. Rear sight has flippable apertures, large for close-range shooting (0-100m) and small for longer-range applications (100-300m), with a notch at the top for quick CQB sighting or engaging targets at 500-600m range. Sold individually and in a front/rear Set. abSPECS: Reinforced polymer, matte black. Steel apertures, matte black. Both sights are 5/8" high when folded, 13/4" total height when deployed. #71L-F Front Sight – 21/4" long, 13/16" wide. Not for use on a gas block. #71L-R Rear Sight – 21/4" long, 11/4" wide.

A.R.M.S. AR-15/M16

#71L FLIP-UP COMBAT SIGHTSRugged, Lightweight

Backup Sights For Your AR

#100-007-994AV #71L-F Flip-Up Front Sight, 3A33M10 � � $ 41.99#100-007-995AV #71L-R Flip-Up Rear Sight, 3A50H16 � � 61.99#100-008-108AV #71L Front/Rear Flip-Up Sight Set,

3A80P85 � � � � � � � � � � � � � � � � � � � � � � � � � � 98.99

Rugged flip-up sights provide instant backup when primary sight fails or weather conditions limit its use. Robust cross-bolt with oversized, slotted hex nut locks clamping block tightly to Picatinny accessory rail for zero sight movement. Clean, low profile design won’t snag on other gear when folded down. All models regulate with mil-spec A2 carbine sights or same-height aftermarket sights—perfect for co-witnessing with non-magnifying red dot and holo-graphic optical sights. Precision machined from hardcoat anodized 6061 T6 aluminum and heat-treated 4140 steel for repeatable set-tings and the strength to handle the rigors of combat. A2 windage knob on rear sights provides precise 1/2 MOA adjustment. Standard Rear - Versatile, .108" diameter aperture gives an excellent field of view for both short- and long-range targets. Deep grooves on the sides ensure positive grip for quick deployment, while ball detent lock resists accidental folding down during strenuous maneuvers. 360 Series Rear - HK-style rotating turret for maximum accuracy out to 300 yards. Knurled turret collar with machine engraved range index marks allow quick aperture changes; two ball detents lock tur-ret in place at each position. Close-range .160" aperture provides a large field of view for close combat; three .070" apertures are trajec-tory calibrated for the mil-spec M4 at 100, 200, and 300 yard ranges. (Best accuracy with 5.56mm (.223) ammunition that duplicates the military M855 62 grain FMJ load.) Front Sight clamps to gas block accessory rail. A2-style .070" wide adjustable post is correct height for both rear sight models. Thick, protective ears guard sight post from bending or breakage. abSPECS: 6061 T6 aluminum and 4140 steel, matte black. Standard Rear - 13/8" (3.5cm) overall length, 17/8" (4.8cm) high (extended), 7/8" (2.2cm) high (folded). 360 Series Rear - 13/8" overall length, 17/8" high (extended), 13/16" (3cm) high (folded). Trajectory calibrated for carbines with 16" long barrel equipped with A2 front sight or sights of equivalent height. Front - 7/8" (2.2cm) long, 1" (2.5cm) wide, 1.650" (4.2cm) high (extended), 3/4" (1.9cm) high (folded).

Fast Deploying Backup Sights For Emergency Situations

Standard Rear

#080-000-509AV Std Flip-Up Rear Sight, 8K70H99 � � � � �$ 79.99#080-000-510AV 360 Series Flip-Up Rear Sight, 8K94M59 � � 99.99#080-000-521AV Front Flip-Up Sight, 8K47M99 � � � � � � � � 49.99#080-000-524AV Front/Std Rear Flip-Up Sight Set,

8K118Q99 � � � � � � � � � � � � � � � � � � � � � � � � � � 129.99#080-000-525AV Front/360 Series Rear Flip-Up Sight

Set, 8K124P91 � � � � � � � � � � � � � � � � � � � � � � 129.99

360 Series Rear Front Sight

WHITE LINE FRONT POST - Draws your eye to the sight and increases contrast on dark targets. Dou-ble-faced, 30° angle blade offers 2.5 MOA elevation per click. .080" wide version for improved accuracy at long range, .100" wide version is faster to acquire at close range.SPECS: Stainless steel, black, matte finish. Includes sight adjustment tool. .080" (2mm) or .100" (2.5mm) wide post. .030" (7.6mm) wide, white stripe, square top.#006-111-080AV .080" White Front Post, 6K30P04 � � � � $ 31.50#006-111-100AV .100" White Front Post, 6K30C04 � � � � 31.50

24/7 TRITIUM STRIPE POST -Features a strip of glow-ing, green, Tritium gas inset against a white stripe, surrounded by a .100" wide black blade. Ideal for low-light tactical situations where rapid sight acquisition is critical. SPECS: Stainless steel, black, matte finish. .100" (2.5mm) wide post. square top. Green Tritium stripe is inset against the .030" (7.6mm) wide, white stripe. #006-000-103AV 24/7 Tritium Stripe Front Post,

6K59H99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 63.90

ROUND TOP TRITIUM DOT FRONT POST - Round Top, single-faced, .080" wide front post with a bright, green tritium dot with a .11" O.D. white ring for fast, low light, target acquisition. 5 MOA elevation per click.SPECS: Stainless steel, black, matte finish. Includes sight ad-justment tool. .080" (2mm) wide, round top with .11" (2.8mm) O.D. white ring with tritium center.

#006-111-181AV Round Top Tritium Dot Front Post, 6K59H99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 63.90

REAR APERTURE - Features two, flip-style ap-ertures for close engagement and precision, distance shooting. Large, ghost-ring for close ranges has .230" I.D. opening; precision, long distance aperture with .100" I.D. opening. El-evation does not change when switching aper-tures. Direct replacement for factory rear sight, no modifications to the rifle are required.SPECS: Stainless steel, black matte finish. .230" (5.8mm) I.D. large aperture. .100" (2.5mm) I.D. small aperture.#006-111-001AV AR-15/M16 Rear Aperture, 6K30P04 � � $ 31.50

24/7 PRECISION TACTICAL SIGHT SET - Tritium sight set pro-vides excellent sight visibility in all light conditions. Front post is .100" wide and features a green Tritium vial for low-light operations. Easy-to-see, white outline reflects ambient light for day missions. Rear sight features two, flip-style aper-tures (.100" and .225" I.D.) for long-range and close-quarter engagement. Close-range aperture features two, subdued, tritium dots at 3 o’clock and 9 o’clock for proper alignment with the front sight post in low-light conditions. Same-plane design eliminates elevation differences between small and large apertures. Rear sight aperture can be chosen for the lighting situation as well as the range of target.SPECS: Stainless steel, black matte finish. Front Post - .100" (2.5mm) wide post, square top. Green tritium strip is inset against the .055" (1.4mm) wide, .17" (4.3mm) high, white stripe. Rear Aperture - .100" (2.5mm) I.D. small aperture, .225" (5.7mm) I.D. large aperture.

#006-000-149AV 24/7 Precision Tactical Sight Set, 6K120L37 � � � � � � � � � � � � � � � � � � � � � � � � � $ 126.00


HIGH VISIBILITY SIGHTSFast, Accurate Sighting In All Light Conditions

ab

ab

ab

ab

ab

Rugged aluminum and steel flip-up rear sight regulates properly with A2-height front sights and can be co-witnessed through an optic. Dual apertures are calibrated for close- and mid-range targets, simply aim through both or fold the first one down and use the second aperture. Easily mounts to a Picatinny receiver rail; locknut is retained by a safety wire, so you can’t lose it. Non-snagging lever instantly releases the spring-loaded sight into the ready position. #40 Std. A2 is 1" high from top of flattop when folded and has A2 apertures calibrated for 250-300 and 500-600 meters. Windage is click adjustable in increments of 3/4 MOA. Compact #40L models stand only 5/8" high from top of flattop when folded. All fea-ture a dual-function notch in the top of the aperture leaves that’s designed for ultra-fast target acquisition at ranges under 50 meters, and also serves as a ranging aperture at 400-600 meters. #40L Low Profile is calibrated for 250 and 300 meter combat ranges, with windage adjustable in 3/4 MOA increments per click. NSN #1005-01-575-3508. #40L-SP features “same-plane” apertures, so the operator can switch between large and small apertures without worrying about them being zeroed to different ranges. Windage adjustable in 3/4 MOA increments. #40L-F front sight regulates with all A.R.M.S. rear sights. Front post is the same width as the standard M16A2 sight post. abSPECS: Apertures – Steel, matte black. Hardware - Stainless steel, matte black. Base - aluminum, hardcoat anodized, matte black. 23/16" (5.6cm) long, 13/8" (3.5cm) wide. #40 Std. A2 – 1" (2.5cm) high from flattop (folded), 15/8" (4.1cm) high (deployed). #40L/40L-P/40L-SP – 5/8" (1.6cm) high from flattop (folded), 15/8" (4.1cm) tall (deployed). #40L-F – 5/8" (1.5cm) high from rail (folded), 13/4" (4.4cm) high deployed. For proper regulation with A2-type rear sight, must be mounted on a handguard rail or railed gas block that is the same height as the receiver rail.

A.R.M.S. AR-15/M16

#40 FLIP-UP SIGHTS

#40L/40L-P/40L-SP

#100-003-316AV #40 Std. A2 Sight, 1K129G61 � � � � � � � �$ 152.99#100-003-317AV #40L Low Profile Sight, 3A148L99 � � � 148.99#100-004-800AV #40L-SP Same-Plane Low-Profile

Sight, 3A143J03 � � � � � � � � � � � � � � � � � � � 172.99#100-011-048AV #40L-F Low Profile Front Sight,

3A118Q13 � � � � � � � � � � � � � � � � � � � � � � � � � 143.99

#40 Std. A2

Spring-Loaded, Flip-Up Sights For Use With Or Without Optics

CAR-15/M4

FLIP-UP TACTICAL SIGHTS

Machined aluminum backup sights mount at a 45° offset angle to enable instant transi-tion from primary optic simply by tilting the rifle. Rear sight mounts on receiver rail, front sight on handguard top rail. Can be installed on the left or right side of receiver, and eliminates the need to co-witness backup sights through your optic. Provides the same bore height and sight picture as standard USGI A2 sights. A2-style rear sight has flip-up long- and short-range apertures, and is adjustable for windage and elevation in 1/2 MOA clicks. Locking bar and cross-bolt attachment system clamps securely to MIL-STD 1913 Picatinny rails and sits only .20" above the rail, so there’s no interference with the main sighting system. Front sight base won’t interfere with the

Mounts At 45° Offset For Instant Shift From Primary

Optic To Backup Sights

#100-006-162AV AR-15/M16 Rapid Transition Sights, 4Z190C98 � � � � � � � � � � � � � � � � � � � � � � � � $ 229.99

DUECK DEFENSE AR-15/M16

RAPID TRANSITION SIGHTS

beam path of military IR laser/illuminators. No special tools needed; installs using a slot tip screwdriver. abSPECS: 7075 aluminum, hardcoat anodized, black. Front – 13/8" (3.5cm) long, 3" (7.6cm) wide. 3.1 oz. (88g) weight. Rear – 1" (2.5cm) long, 23/4" (7cm) wide. 1.5 oz. (43g) weight.

Flip-up reserve sights em-ploy unique diamond shape that gives specific reference points to help your eye instantly center the target in the sights. Clamps to se-

curely Picatinny rail, with a locking system that ensures sights stay up securely and remain zeroed. When not in use, sights fold down with the push of a button Front sight has angled ears protect the A2-type post and serve as visual reference point. Rear sight offers dual same-plane short and long-range apertures, horizontal white reference marks, and ½ MOA windage adjustments. Folds and deploys with either aperture active. abSPECS: Machined 6061 T6 aluminum, Type III hardcoat anodized, matte black finish. Fits Picatinny rail. Front Sight - 1.1" (2.9cm) long deployed. 2.3" (5.9cm) long folded. 1.3" (3.4cm) wide. 1.9" (5cm) high deployed. .66" (1.6cm) high folded. Rear Sight - 1.1" (2.9cm) long deployed. 2.3" (5.9cm) folded.1.3" (3.4cm) wide. 1.9" (5cm) high deployed. .66" (1.6cm) high folded.

Distinctive Diamond Shape Helps Fast Sighting

Front

#100-011-420AV Integrated Sight System, 8D193C57 � �$ 228.99#100-011-422AV Front Sight, Only, 8D95K96 � � � � � � � � � 112.99#100-011-421AV Rear Sight, Only, 8D104Q26 � � � � � � � � 117.99

DIAMONDHEAD AR-15/M16

FLIP-UP SIGHTS

Rear

SIGH

TS

AR

-15

/M16


SINCE 1939

Originally manufactured under contract for Picatinny Arsenal, the MAD (Multiple Aperture Device) rear sight gives the tactical shooter a

dependable, fast-deploying back up sight system with preset range points out to 600 yards. A robust locking bar and cross-bolt clamp the MAD securely to the rearmost slot in any Picatinny-style flattop receiver rail. Rotating disc has five numbered .070" apertures preset to provide the right elevation for quick, short-range engagements or precise accuracy at longer distances: 0 – 0 to 200 yards, 3 – 300 yards, 4 – 400 yards, 5 – 500 yards, 6 – 600 yards. (Calibrated for 5.56 NATO ammunition with 55-62 grain bullet fired from a 16" barrel.) Position number is clearly visible to the shooter through a window below the aperture. Easy-to-grasp serrated windage adjustment knob provides approximately 1/2 MOA adjustment per click on standard-issue M16A3 rifle and .65 MOA on M4 carbine. Co-witnesses with most non magnifying holographic and red dot optical sighting systems. Folds down out of the way for low-profile storage when not in use; radiused edges and rounded corners help prevent snagging on other gear. Folded MAD overhangs the upper receiver by approximately 1/4", providing a lip for solid thumb contact to deploy the sight instantly, even when the operator is wearing gloves. Locking detent ball prevents the raised sight from accidental lowering; the operator must depress a spring-loaded release but-ton to lower the sight. Precision machined base of strong, hardcoat anodized 6061 T6 aluminum and sight tower/aperture wheel of Parkerized 4140 steel handle the punishment of high-tempo com-bat operations. abSPECS: Steel and aluminum, matte black finish. Covers 11/4" of rail space. .070" diameter apertures. Fits flattop AR-15/M16/CAR-15/M4.

GG&G AR-15/M16

MAD FLIP-UP REAR SIGHTFast Deployment In Emergencies; Multiple-

Setting Aperture For Precise Accuracy

#100-003-551AV MAD Flip-Up Rear Sight, 6C106P88 � � � � � � � � � � � � � � � � � � � � � � $ 120.99

Flip-up sights provide instant backup if your primary sight fails or the tactical requirements change. Innovative, spring loaded detent button locks the sight in the upright position to ensure it won’t fold down unexpectedly. Steel cross-bolt is countersunk to provide a smooth, snag-free surface. ab

A2-STYLE REAR SIGHT - Clamps to Picatinny flattop rails and with proper setup will co-wit-ness with an Aimpoint, EOTech, or similar red-dot sight system. Military A2-style double peep apertures give an excellent field of view for both short- and long-range targets. Includes a .062" diameter aperture for precision accuracy during daylight, especially at long range. Large, .195" di-ameter aperture provides a wide field of view for close quarters oper-ations. Large, knurled windage knob is easy to grab and provides 0.48 MOA adjustment on M162E4 rifles and 0.65 MOA on M4 carbines.SPECS: Base - 6061 T6 aluminum, matte, black, hardcoat anodized fin-ish. Aperture/Hardware - 4140 steel, matte, black, mil-spec manganese phosphate coating. 2" (5.1cm) overall length (folded), 15/32" (2.9cm) high extended, 11/16" (1.7cm) high folded.#100-003-548AV Standard Backup Iron Sight,

6C91B68 � � � � � � � � � � � � � � � � � � � � � � � �$ 125.99

FLIP-UP FRONT SIGHT - Rugged, all-steel sight clamps to Picatinny rail on gas block. Easy to ac-tuate, spring-loaded mechanism, with a positive lock that prevents folding the sight until you hit the release button. Deployed height of the post is the same as an A2 front sight. Includes standard, A2 front post, detent, and spring, with full elevation

GG&G AR-15/M16

BACKUP IRON SIGHTSFast Deployment, With Excellent Accuracy

Currently in use by the U.S. Army, Marine Corps, and various law enforcement agencies, these small, lightweight folding sights can be used in conjunction with most scopes, red dots or other optics. They attach to any Picatinny rail, and have a very small footprint, even when folded down. ab

FOLDING REAR SIGHTS - Cali-brated for the trajectory of the 55-grain 5.56 NATO round, and set for either 300 or 600 me-ters. 300 Meter Folding - fixed-post apeture and adjustable for windage only. Includes a snap-in polymer insert to reduce aperture size for more precise aiming. 600 Meter Folding is adjustable for windage and fea-tures a rotating drum for fast elevation changes between 200 and 600 meters. Micro models have the same features, but have a smaller base and even lower profile when folded. SPECS: Machined aluminum, hardcoat anodized, matte black. 300 Meter Folding - 2.2" long folded. 1.6 oz. wt. 300 Meter Micro - 2.1" long folded. 1.5 oz. wt. 600 Meter Folding - 2.2" long folded. 1.5 oz. wt. 600 Meter Micro - 2.1" long folded. 1.5 oz. wt. #100-015-205AV 300 Meter Folding Rear Sight,

4C225E79 � � � � � � � � � � � � � � � � � � � � � � � � $ 244.99#100-015-206AV 300 Meter Micro Rear Sight,

4C125N50 � � � � � � � � � � � � � � � � � � � � � � � � 125.50#100-015-207AV 600 Meter Folding Rear Sight,

4C201F99 � � � � � � � � � � � � � � � � � � � � � � � � 201.99#100-015-208AV 600 Meter Micro Rear Sight,

4C154C99 � � � � � � � � � � � � � � � � � � � � � � � � 154.99

FOLDING FRONT SIGHT - Designed to pair with the folding rear sights, these folding front sights mount to any Picatinny rail, and provide front posts shielded with protective ears. Micro has a proprietary front post and a thumbwheel for fast elevation adjustments. SPECS: Machined aluminum, hardoat anodized, matte black finish. Folding M4 - 1.9" long folded. 1.6 oz. wt. Micro - 1.9" long folded. 1.5 oz. wt. #100-015-210AV Folding M4 Front Sight, 4C191E99 � � $ 191.99#100-015-209AV Micro Front Sight, 4C154D38 � � � � � � 154.38

45° OFFSET SIGHT SETS - Front/rear sets have 45° offset mounts that let these sights clear low-mounted scopes, red dots, or other optics. Enables instant change from optic to “iron” sight for CQB-style shooting - just tilt the rifle off center to instantly see sights. Folds out of the way when not in use. Front is Micro profile, with a 600 Meter Micro Rear Folding. Clamps securely to any Picatinny rail for superior, no-fail performance in strenuous combat and competition conditions. SPECS: Machined aluminum, hardcoat anodized, matte black finish. #100-016-833AV Offset Sight Set, Clamp, 4C283A50 � � $ 283.50


FOLDING SIGHTSLow-Profile Backup Sights Won’t Interfere With Primary Optic

300 meter Micro

600 meter MicroMicro Front

600 meter Folding

adjustment. Hardened detents and hinge pins for durability. Pro-tective ears guard the sight post from impact, and all edges have been dehorned to protect the shooter.SPECS: 4140 carbon steel, manganese phosphated, matte black. Height: 1.650" from top of base to top of sight. 3.2 oz. (90g) wt. Fits MIL-STD 1913 Picatinny rail. Installation instructions and Allen wrench included.#336-000-034AV Steel Gas Block Sight, 6C115B07 � �$ 119.99

A Luth-AR A1 Rear Sight As-sembly adds an extra touch of authenticity to your retro build. It's designed to look and act the part of the original-style rear sight found

on early "carry handle" AR-15 and M16A1 rifles. While the modern AR offers many improvements, there's nothing wrong with having an appreciation for Eugene Stoner’s original design. This sight has the same pair of "flippable" apertures as the later rifles, but these measure .070" and .080" in diameter. All-steel construction, with a non-reflective a matte black finish. Includes the aperture, windage drum, detent, detent spring, windage screw, and roll pin, so it is ready to install on your next "retro" build. It comes as a kit because the A1 sight is actually assembled as you install it in the upper re-ceiver. The ideal rear sight for your Brownells M16A1 "Retro" upper receiver. Note that this sight will not fit the later M16A2-type carry handle receivers. A2 Rear Sight Aperture is the later style with "0-2" stamped on the larger aperture face. It has the standard (nowadays) .070" long-range peep for targets farther than 200 meters, and the .195" peep for targets at 0 to 200m. If you're accustomed to this configuration, you can swap the A1 assembly's old-style aperture for this one. Or replace a lost or damaged aperture on a later rifle. ab

LUTH-AR AR-15/M16

EARLY-STYLE A1 REAR SIGHTGives Your Retro Rifle a True

"Old School" Look

#100-024-755AV AR-15 A1 Rear Sight Assembly, 3D14G69 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 19.69

#100-028-065AV AR-15 A2 Rear Sight Aperture ONLY, 3D7K57 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8.45

Made from case hardened steel, this version of Magpul’s popular MBUS flip up sights is ready for tough competition and tactical operations. Clamps directly

to MIL-STD 1913 Picatinny rails. Both sights have positive detents to keep them in position at standard AR sight height when deployed, yet they maintain a low, no-snag profile when stowed. Dual aperture rear sight has a tool-free windage adjustment and sits only 3/8" above the rail when folded. Front sight has a finger adjustable elevation knob on the post, eliminating the need for a sight adjustment tool; it sets 7/16" above the rail when stowed. Narrow width front sight avoids interference with aiming laser, night vision device, and light installation. Offset models have a right-handed 45° offset for near-instantaneous transition from optics to iron sights with a simple cant of the rifle. Sights are standard AR height over the bore when deployed. Low-profile footprint reduces interference and ensures compatibility with most rifle setups. abSPECS: Steel, melonite finish, black. Rear Sight – 2" (5cm) OAL, 17/16" (3.7cm) wide, 3/8" (1cm) above the rail when stowed. 17/8" (4.8cm) high deployed. Front Sight – 1½" (3.8cm) OAL, 1¼" (3.2cm) wide, 7/16" (1.1cm) above the rail when stowed. 111/16" (4.3cm) high when deployed.

MBUS® PRO LR REAR SIGHT - Adds to the origi-nal MBUS Pro rear sight elevation adjustments for more accurate engagement of targets at variable distances. Easy to operate, positive detent-locking elevation wheel is marked with numeric settings that are easy to read from the shooting position. Same rugged all steel construction, no-tool ad-justments, and functionality as the original MBUS Pro. Deploys to standard AR rear sight height. Set includes LR rear sight and stan-dard MBUS Pro front sight. SPECS: Steel, Melonite finish, matte black. #100-016-569AV MBUS Pro LR Rear Sight, 3K104C27 � �$ 123.45#100-016-572AV MBUS Pro LR Sight Set, 3K169E24 � � � 193.94

Minimal-Profile Steel Backup Sights For Extreme Operating

Environments

#100-012-617AV MBUS Pro Sight Set, 3K153Q75 � � � � � $ 171.38#100-012-616AV MBUS Pro Rear Sight, 3K86N88 � � � � 99.70#100-012-615AV MBUS Pro Front Sight, 3K70D33 � � � � 80.70#100-016-450AV MBUS Pro Offset Sight, Front,

3K70E33 � � � � � � � � � � � � � � � � � � � � � � � � � � 80.70#100-016-451AV MBUS Pro Offset Sight, Rear,

3K86Q88 � � � � � � � � � � � � � � � � � � � � � � � � � 99.70#100-016-524AV MBUS Pro Offset F/R Sight Set,

3K160D35 � � � � � � � � � � � � � � � � � � � � � � � � 171.38

MAGPUL AR-15/M16

MBUS PRO SIGHT SET

Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous re-lease mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails. Front sight must be mounted on a railed forend on the same plane as the receiver rail to witness correctly with rear sight. Not compatible with railed gas blocks or the MOE® handguard. Sets contain a front and a rear sight. abSPECS: Reinforced, injection-molded polymer, Black, Dark Earth, O.D. Green, or Stealth Gray. Heights measured from top of rail to top of sight. Rear Sight - 1.5" (3.8cm) long deployed, 2.6" (6.8cm) long folded, 1.2" (3cm) wide, .5" (1.3cm) high folded, 1.6" (4cm) high extended. Large ap-erture, .185" (4.7mm) diameter. Small aperture, .070" (1.8mm) dia. Front Sight - 1.5" long deployed, 2.5" (6.3cm) long folded, 1.2" wide, .5" high folded, 1.5" high extended. Sight post, .070" (1.7mm) wide.


MBUS® GEN 2 SIGHT SYSTEM

Reliable, Low-Profile, Quick-Deploy Backup Sights

#100-006-941AV MBUS2 Sight Set, Black, 3K94E00 � � $ 108.16#100-007-327AV MBUS2 Sight Set, Dark Earth,

3K74F99 � � � � � � � � � � � � � � � � � � � � � � � � � � 108.16

Front Sight

Rear Sight

#100-018-407AV MBUS2 Sight Set, O.D. Green, 3K74J99 � � � � � � � � � � � � � � � � � � � � � � � � � � 108.16

#100-015-975AV MBUS2 Sight Set, Stealth Gray, 3K74I99 � � � � � � � � � � � � � � � � � � � � � � � � � � 108.16

#100-006-787AV MBUS2 Rear Sight, Blk, 3K47D81 � � � 55.05#100-006-788AV MBUS2 Rear Sight, Dark Earth,

3K47C35 � � � � � � � � � � � � � � � � � � � � � � � � � 55.05#100-006-789AV MBUS2 Rear Sight, O.D. Green,

3K47E35 � � � � � � � � � � � � � � � � � � � � � � � � � � 55.05#100-014-406AV MBUS2 Rear Sight, Stealth Gray,

3K47P35 � � � � � � � � � � � � � � � � � � � � � � � � � � 55.05#100-006-791AV MBUS2 Front Sight, Blk, 3K33Q17 � � � 37.95#100-006-792AV MBUS2 Front Sight, Dark Earth,

3K33C26 � � � � � � � � � � � � � � � � � � � � � � � � � 37.95#100-006-793AV MBUS2 Front Sight, O.D. Green,

3K33M26 � � � � � � � � � � � � � � � � � � � � � � � � � 37.95#100-014-400AV MBUS2 Front Sight, Stealth Gray,

3K33C26 � � � � � � � � � � � � � � � � � � � � � � � � � 37.95

SIG

HT

S

AR

-15/M

16


brownells.com

Flip up sights deploy instantly to keep you op-erational if the primary sight system on your flattop AR-15 fails or loses effective-ness in low light conditions. Push-button controlled, positive locking, ball-detent system snaps sights firmly into position when you need them and locks them down when you don’t. Folded sights allow a completely unobstructed view through optics and won’t snag on brush, clothing, or gear. Large, spring-loaded button is easy to find and operate, even under stressful conditions. Protective hood over front sight posts and ears around rear sight aperture guard against damage dur¬ing rough handling. Rugged, machined steel and aluminum construction will stand up to years of hard use. Durable, matte black, mil-spec finishes resist corrosion. Barrel Mount Front Sight - Solid, 4140 steel integral gas block/sight base clamps on .750" diameter barrel. Hex head cross-bolts pull clamp halves tight to barrel to completely immobilize sight when properly tightened. Lightweight aluminum sight body comes with A2 sight post installed; also accepts aftermarket posts. Sight as-sembly folds to the rear when retracted. Rail Mount Front Sight is designed for installation on a Picatinny style forearm rail positioned at the same height as the receiver rail. Folds to the rear in the down position. Rail Mount Rear Sight - Low-profile, windage-adjustable sight allows the use of optics and neatly folds down to the rear when not in use. A2-style same-plane aperture system is designed to flip between .090" and .195" diameter peep openings without losing zero. Ensures the correct sight picture for both close up and long range targets. abSPECS: 4140 steel base, Parkerized, and aluminum hardcoat anodized; matte black finish.

PRECISION REFLEX AR-15/M16

FLIP-UP TACTICAL SIGHTSReady When You Need Them, Fold Out Of The Way When You Don’t

#714-000-003AV Barrel Mount Front Sight, 4A162H75 � � � � � � � � � � � � � � � � � � � � � � � � $ 181.99

#714-000-005AV Rail Mount Front Sight, 4A111A53 � � � � � � � � � � � � � � � � � � � � � � � � � 145.99

#714-000-004AV Rail Mount Rear Sight, 4A127K03 � � � � � � � � � � � � � � � � � � � � � � � � 154.99

Current U.S. Army standard-issue back-up rear sight for M4 carbines and M16A4 rifles flips up instantly at the touch of your thumb when primary sight fails or tactical situ-ation makes iron sights preferable. Designed in conjunction with Picatinny Arsenal engineering staff and rigorously tested at Fort Benning and Aberdeen Proving Ground for robustness, ease of use, and effective targeting out to 600 meters. Detent-locking lever lets you quickly switch to one of eight range settings: 200, 300, 350, 400, 450, 500, 550, and 600 meters. Adjust windage easily with grooved, A2-style windage knob and position markers on the back of the sight for repeatability of settings. Bright, white, laser etched numbers and markers are clearly visible even in low light. Rugged machined steel construction ensures sight retains zero even under heavy, full-auto fire. Clamps securely to the rearmost slot of MIL-STD 1913 Picatinny accessory rail on flattop receiver via simple but strong locking bar and bolt. Rounded corners and beveled edges further reduce danger of snagging on other gear when sight post is down. Regulates correctly with A2 front sight on any AR-15-style rifle or carbine; instructions included for adjusting front sight post height to set exact zero. Designed to co-witness with most non-magnifying optical sights. abSPECS: Steel, matte black finish.

Deploys Quickly; Fast, Easy Range Setting; Compact Profile When Folded

#100-003-702AV AR-15/M16 USGI Backup Iron Sight, 6B99J50 � � � � � � � � � � � � � � � � � � � � � � � � � $ 120.99

MATECH AR-15/M16

USGI BACKUP IRON SIGHT

Excellent as a primary or back-up sight system, these flattop-mounted, low-profile sights deploy with the flick of a finger. No buttons to hit when deploy-ing or stowing sights, dual locking detent

springs hold the sights firmly in place, yet allows the sights to fold down if bumped in the field. Intermediate rear aperture provides for fast target accusation, plus it means you don’t have to fumble between a small and large aperture when engaging targets at either long or short range. Both sights deploy to mil-spec height when extended. Front sight has a standard A2 post that can be adjusted for elevations (1.5 MOA per click) using the included sight tool. Rear sight adjusts for windage in .65 (carbine) or .50 (rifle) MOA incre-ments. Both sights clamp securely to any MIL-STD 1913 Picatinny rail. NOTE: Front sight needs to be mounted on the same plane as the rear, such as on a flattop-rail height handguard rail. Constructed from a combination of 6061 T6 aluminum and hardened steel. Off-set Sight Set clamps to the topside Picatinny rail but projects the sights at a 45-degree offset, so you can deploy them and instant transition from main optic to BUIS simply by slightly canting the weapon. All other features are the same as the standard model. ab


COMBAT RIFLE SIGHT SETSLow-Profile BUIS Stays

Out of the Way- Until You Need It

Offset Model

#100-032-612AV MI-CRS-SET Combat Rifle Sight Set, 2A132E84 � � � � � � � � � � � � � � � � � � � � � � � � $ 149.95

#100-033-477AV MI-CRS-OSS Offset Combat Sight Set, 2A150C00 � � � � � � � � � � � � � � � � � � � 169.95

Deploy with the flick of a finger to provide instant back-up, so you stay in the fight if your optic or laser sight fails. Super-smooth pivot mechanism with sturdy ball-bearing detent locks positively in the raised position and stays locked until you hit the pushbutton release. Sight folds down neatly out of your sight path when not in use. Machined from high-quality 6061 T6 aluminum and hardcoat anodized for increased wear-resistance. Hex wrench included with all models for easy installation. ab

REAR SIGHTS - Clamp securely to flattop receivers. Flip-style A2 aper-ture features a small peep opening for long-range daylight shots and a large opening for close-range and low-light work. Same-plane calibra-tion ensures the point of impact will not change when switching from one aperture to the other. Deeply grooved knob provides posi-tive clicks for windage adjustment in .65 MOA increments on rifles and carbines with 16" barrels and .49 MOA on rifles with 20" bar-rels. MCTAR-ERS - Emergency Rear Sight with protective “ears” to guard the aperture from accidental damage. Aperture has .060" and .200" diameter peep openings; same windage knob as stan-dard A2 sight. MCTAR-SPLP - Low-profile design is less than 1/2" high when folded, yet provides full windage adjustment like the ERS model. Aperture has .070" and .200" diameter peeps.SPECS: Aluminum, hardcoat anodized, matte black. Fits flattop AR-15/M16 rifles. MCTAR-ERS - 13/8" (3.5cm) long,1-3/8" wide, 13/4" (4.4cm) high deployed, 1" (2.5cm) high folded. 2.2 oz. (61g) weight. .MCTAR-SPLP – 21/4" (5.7cm) long folded, 11/8" (2.9cm) long deployed, 11/4" (3.2cm) wide, 15/8" (4cm) high deployed, 7/16" (1.1cm) high folded. 1.5 oz. (41g) weight.#100-001-992AV MCTAR-ERS Rear Sight, 2A108C93 � � $ 116.99#100-003-432AV MCTAR-SPLP Rear Sight, 2A118H84 � � 124.99

FRONT SIGHTS - Designed to work with Midwest In-dustries flip-up rear sights, all models have standard A2 front sight post and clamp directly to Picatinny rails. MCTAR-FFR mounts on AR-15/M16 handguard rail; MCTAR-FFG attaches to gas block rail. MCTAR-10-AFFG mounts on gas block rail and positions sight post at correct height for ArmaLite® AR-10® carbine with factory-installed gas block and 16" barrel. May fit other AR-style .308 rifles with gunsmith modifica-tion. Ultra-low profile MI-LFFR clamps to any railed handguard or gas block that is the same height as the upper receiver rail. Stands less than 1/2" above rail when folded.SPECS: Aluminum, hardcoat anodized, matte black. Approx. 21/4" (5.7cm) long folded, 11/4" (3.2cm) long deployed, 11/4" wide, 5/8" (4cm) high folded. 1.7 oz. (50g) weight. MCTAR-FFR - 15/8" (4cm) high deployed. MCTAR-FFG – 15/8" high deployed. MCTAR-10-AFFG – 2" (5cm) high deployed; avail-able in Black only. MI-LFFR - 15/8" high deployed, 7/16" (11.1mm) high folded.#100-003-422AV MCTAR-FFR Forearm Front Sight,

2A83J57 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 89.99#100-003-423AV MCTAR-FFG Gas Block Front Sight,

2A83L57 � � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99#100-002-984AV MCTAR-10-AFFG Gas Block Front

Sight, 2A83M57 � � � � � � � � � � � � � � � � � � � � 89.99#100-005-190AV MI-LFFR Front Sight, 2A94G52 � � � � � � 99.99

MIDWEST INDUSTRIES AR-15/M16/AR-STYLE .308

FLIP-UP SIGHTSInstant Back-Up Sighting At All Ranges

Rail-mounted, fixed, same-plane front sight works with any AR-style flip-up rear sight as a back-up for a scope or red dot. Distinctive HK-style “globe”-shaped ears aid in fast target acquisition, while the serrated, angled ramp eliminates glare. Elevation adjustable in 1/2 MOA increments; positive-locking detent


FIXED FRONT BATTLESIGHTRugged, Reliable, Always Deployed; Globe-

Shaped Ears Focus Sight Picture

#100-005-211AV Fixed Front BattleSight, 3B47L06 � � � $ 56.99

ensures settings change only when you want them to. Base with sturdy side clamp and steel crossbolt attaches to any Picatinny railed forend or gas block that is the same height as the receiver rail. Installs with a standard flathead screwdriver—no protruding knobs or levers to catch on brush, clothing, or other equipment. abSPECS: 6061 T6 aluminum, hardcoat anodized, with stainless steel cross-bolt, matte black finish. 11/4" (3.18cm) long, 11/4" (3.18cm) wide, 2" (5.08cm) high. 1.5 oz (45g) wt.

SIGH

TS

Rugged, flip-up sights provide failsafe backup when your pri-mary optic or red dot sight fails. Sight body flips up easily when you need it and locks securely in place under powerful spring pressure and two locking detent balls, so it can’t be accidentally bumped down until you hit the spring-loaded button on the left side of the base to retract it. Positions apertures at the same height as fac-tory sights, simplifying integration of these sights on your rifle. Base clamps securely to any military or commercial Picatinny rail using a standard flathead screwdriver. No protruding knobs or levers to catch on brush, clothing, or other equipment. Sturdy, protective “ears” shield posts and apertures from impact. Rear sights bolt to flattop receiver rail and are only .460" high when folded. Detent-locking adjustment wheel lets you change the windage setting in 1/2 MOA increments. HK-Style Rear - two same-plane apertures: large .190" aperture provides a wide field of view for close-in targets, while .070" aperture is calibrated for engaging long-range targets. Also available with a Tritium dot on each side of large aperture. DOA Rear - diamond-shaped Di-Optic Aperture (DOA) works like invis-ible crosshairs to center the eye for lightning fast target acquisition. Same-plane aperture has two settings, for targets out to 300 meters and out to 550 meters. Front sights clamp to handguard accessory rail and are only 1/2" high when folded. All models have M4-type post that’s elevation adjustable in 1/2 MOA increments. HK-Style Front - distinctive “globe” shape that aids in fast target acquisition under stress. Also available with a self-illuminating Tritium dot on the post for precise shot placement in low-light conditions. M4/M16-Style Front - deep grooves in the sides of the housing to ensure a firm grasp for fast deployment. abSPECS: Stainless steel and aluminum, Black or Dark Earth finish. Rear Sights – All models 1.17" (3cm) long, 1.25" (3.2cm) wide, 1.85" (4.7cm) high extended. 1.8 oz. (52g) wt. HK-Style Front – 1.17" long, 1.25" wide, 1.9" (4.9cm) high extended. 1.6 oz. (45g) weight. M4/M16-Style Front – 1.17" long, 1.25" wide, 1.75" (4.5cm) high extended. 1.6 oz. weight.


BATTLE SIGHTS

Rugged, Reliable Backup Sighting; Same Height As Factory Iron Sights

#100-003-442AV HK-Style Rear, Blk, 3B108M23 � � � � � � �$ 121.99#100-003-443AV HK-Style Rear, Dark Earth,

3B107N83 � � � � � � � � � � � � � � � � � � � � � � � � � 121.99#100-005-085AV Tritium HK-Style Rear, Black,

3B148A20 � � � � � � � � � � � � � � � � � � � � � � � � � 168.99#100-005-086AV DOA Rear Sight, Black,

3B107Q83 � � � � � � � � � � � � � � � � � � � � � � � � � 121.99#100-003-444AV HK-Style Front, Black,

3B85B28 � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99#100-003-445AV HK-Style Front, Dark Earth,

3B85E28 � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99#100-005-084AV Tritium HK-Style Front, Black,

3B124I02 � � � � � � � � � � � � � � � � � � � � � � � � � � 137.99#100-003-446AV M4/M16-Style Front, Black,

3B85C28 � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99#100-003-447AV M4/M16-Style Front, Dark Earth,

3B85K28 � � � � � � � � � � � � � � � � � � � � � � � � � � 94.99#100-011-225AV HK-Style Front/Rear, Black,

3B187H76 � � � � � � � � � � � � � � � � � � � � � � � � � 217.99#100-011-227AV HK-Style Front/Rear, Dark Earth,

3B187N76 � � � � � � � � � � � � � � � � � � � � � � � � � 217.99#100-011-229AV Tritium HK-Style Front/Rear, Black,

3B248E36 � � � � � � � � � � � � � � � � � � � � � � � � � 274.99#100-011-226AV HK-Style Rear + M4/M16 Front, Black,

3B187B76� � � � � � � � � � � � � � � � � � � � � � � � � � 213.99

HK-Style FrontHK-Style Front DOA RearM4/M16-Style Front

FIXED REAR BATTLE SIGHT - Tactical backup sight is always deployed, so there’s absolutely no delay, no fumbling when you need to transition from the primary optic. Troy designed this sight to be simple, rugged, and reliable—and it takes up onl 11/8" of rail space. Precision machined from solid aluminum, with plenty of metal on the protective “ears” around the two-position aperture. All edges and corners are rounded, and there are no protruding knobs or levers to catch on brush, cloth-ing, or other equipment. Rear of the base is undercut to provide clearance for access to the charging handle. Same-plane aperture flips easily between .190" and .070" diameter peeps, just like the Folding Rear Battle Sight. Windage adjustable in ½ MOA clicks us-ing a coin in the slot of the flush A1-style detent-locking adjust-ment wheel. Clamps to any Picatinny rail; installs with a standard flathead screwdriver.SPECS: 6061 T6 aluminum, hardcoat anodized, matte black finish. 1.5" (3.8cm) OAL, 1.25" (3.2cm) maximum width, 1.875" (4.8cm) high from top of rail to top of sight housing. 1.8 oz. (52g) weight.#100-004-381AV Fixed Rear Sight, 3B56P35 � � � � � � � � � � $ 66.99

ab

#100-011-228AV HK-Style Rear + M4/M16 Front, Dark Earth, 3B187L76 � � � � � � � � � � � � � � � � � � � � 227.99

AR

-15

/M16


SINCE 1939

SIG

HT

S

Low-profile flip-up sights keep the sighting plane as close to the barrel as possible and feature all-metal con-struction for durability and reliability. Both front and rear

sights are easily deployed and lock in the upright position; depress-ing a simple button release allows them to be quickly folded for storage. Designed to be mounted on the same plane. Clamp to MIL-STD 1913 Picatinny rails using a stainless cross locking system with a single, flush-fit clamping screw for easy installation. Rear is adjustable for windage; front adjustable for elevation. abSPECS: Aluminum, hardcoat anodized matte black. Stainless cross pins and fittings, matte black oxide finish. 2"(5cm) long , 11/4" (3.18cm) wide, 3/4" (1.91cm) high when folded, 1.3" (33mm) high in upright position. Sights must be mounted on same plane.

TROY INDUSTRIES AR-15/ M16

MICRO FOLDING BATTLESIGHTSRugged, Minimal Profile

Backup Sight Set

#100-008-086AV Micro Battle Sight Set, 3B175F39 � � � $ 188.99

XTI (Xpress Threat Interdiction) backup sights mount at a 45° angle to your primary optic for ultra-quick transition from magni-fied to open sights. Excellent for competition, CQB, or when your scope or red dot suffers a failure. Rear sight has a wide “V” sight notch over a vertical white stripe that instinctively draws your eye to the center. Front sight has a self-illuminating green Tritium dot surrounded by a .12" white ring for rapid sight acquisition in daylight or twilight conditions. XTI sights clamp to MIL-STD 1913 Picatinny rails, each consuming only ¾" of rail space. Adjustable for elevation and windage. Big Dot set has an even larger white surround on the front Tritium insert for added visibility in dim light. abSPECS: Aluminum, matte black. ¾" (1.9cm) long, each. #100-010-599AV XTI Sights, 6K153A70 � � � � � � � � � � � � � � $ 162.00#006-000-184AV Big Dot XTI Sights, 6K153N70 � � � � � � 162.00


XTI™ XPRESS THREAT INTERDICTION SIGHTS

Angle-Mounted Backup “Iron” Sights For Fast Transition From Optic

Spring-loaded sights deploy at the push of a button to provide instant backup sighting. Quick Deploy System locks securely and requires a firm, positive press of the button to deploy or retract the sight, so it won’t accidentally activate when bumped—these sights stay where you put them. Minimal profile when folded—only .435" high—with radiused edges and a smoothly curved front surface to prevent snagging on foliage, gear, or clothing. Crossbolt and side bar provide solid attachment to MIL-STD 1913 Picatinny rail systems. All-aluminum construction is lightweight, yet plenty strong to han-dle the hard knocks of tactical operations, with a durable, scratch-resistant hardcoat anodized finish for extra surface strength. Front Sights have mil-spec A2 post that adjusts for elevation; same-plane alignment with rear sights. Available with thick, protective ears that shield the post or an H&K-style hood for even greater security. Rear Sight adjusts for windage with the easy-to-grasp knurled knob and has two-position, A2-style aperture that lets you flip between .065" and .200" peeps. Set contains the front sight with ears and the two-position rear sight. abSPECS: Aluminum, hardcoat anodized, matte black. All models 1" (2.5cm) deployed length, 11/4" (3.2cm) wide, .435" (11mm) folded height. Front Sight w/Ears – 21/8" (5.4cm) folded length, 1.420" (3.61cm) deployed height from top of base to top of blade. Front Sight w/Hood – 2.1" folded length, 1.360" (3.45cm) deployed height from top of base to top of blade. Rear Sight – 21/4" (5.7cm) folded length, 1.425" (3.62cm) deployed height from top of base to center of aperture. Dual-aperture configuration with .065" and .200" peep holes.

Rugged, Quick-Deploy Backup System; Minimal Profile When Folded

QDS Front

#100-004-315AV QDS System Front and Rear Sight Set, 9A168H91 � � � � � � � � � � � � � � � � � � � � $ 188.99

#100-004-316AV QDS System Front Sight, 9A85G96 � � 91.99#100-004-317AV QDS System Front Sight w/Hood,

9A83E60 � � � � � � � � � � � � � � � � � � � � � � � � � 91.99#100-004-318AV QDS System Rear Sight, Dual

Apertures, 9A94G54 � � � � � � � � � � � � � � 108.99

QDS Rear QDS Rear


QDS SIGHT SYSTEM Heavy-duty, steel construction makes these emergency rear/front flip sights the tactical shooter’s choice for LE and military tasks requiring a compact, backup, sight system of superior strength and dependability. Deploys easily with the flick of your thumb; disengag-es down, out of your sight path when not in use by depressing the spring-loaded pushbutton. Extra thick, protective ears guard against blows that could potentially bend or break the sight post or aperture. Solid clamp with large crossbolt provides rock solid attachment to Picatinny rail systems. Knurled and slotted, quick-release thumb-screw makes sight easy to install/remove. ab

YHM-9584 GAS BLOCK FRONT FLIP SIGHT - De-signed specifically to regulate properly when attached to a gas block rail. Positions the front sight post ap-proximately 11/4" above the accessory rail. All steel components; includes standard sight post. Does not function as a gas block.SPECS: Steel, Mil-Spec phosphate coating. 1" (2.5cm) long, 11/2" (3.8cm) wide, 2" (5.1cm) high when raised. 2.5 oz. (71 g) wt.#100-002-089AV Gas Block Flip Sight, 9A66E66 � � � � � � $ 75.99

YHM-9627 FOREARM FRONT FLIP SIGHT - Short-ened version of the Gas Block Front Flip Sight for use on tactical handguards with accessory rails. Provides the proper sight regulation by placing the sight post approximately 13/8" above most forearm rails. All steel construction. Includes standard sight post.SPECS: Steel, Mil-Spec phosphate coating. 1" (2.5cm) long, 11/2" (3.8cm) wide, 11/2" high when raised. 2.5 oz. (71 g) wt.#100-002-091AV Forearm Front Flip Sight, 9A62L80 � � $ 68.99

YHM-9680 REAR FLIP SIGHT - Low-profile design attaches to A4 flattop receivers and regulates cor-rectly with standard, M16/M4 front sights, as well as all Yankee Hill front sights. Rugged, steel base fea-tures an aluminum stem to keep weight to a mini-mum. Deploys instantly with thumb pressure. Large, knurled, screw head provides 1/2 M.O.A. windage adjustment. In-cludes flip-style aperture with .065" and .200" diameter peepholes for short- and long-range accuracy. Also available in a matched Front/Rear Flip-Up Sight Set with the popular YHM-9394 clamp-on front sight/gas block with bayonet lug and sling loop.SPECS: Steel, Mil-Spec phosphate coating. YHM-9680 Rear Sight - 1" (2.5cm) long, 11/2" (3.8cm) wide, 13/8" (3.5cm) high when raised, 2.5 oz. (71 g) wt. YHM-9394 Front Sight in front/rear sight set - 17/8" (4.8cm) long, 13/16" (3cm) wide. Sight Post – 21/2" (6.3cm) high when raised. Fits .750" O.D. barrels. 5.4 oz. (153g) wt.#100-002-094AV Rear Flip Sight, 9A74G20 � � � � � � � � � � � $ 91.99#100-007-622AV YHM-9394/9680 Front/Rear Sight

Set, 9A136K92 � � � � � � � � � � � � � � � � � � � � � 170.99


BACKUP FLIP SIGHTSRugged Steel Construction; Deploys Fast For Instant Emergency Use

Mil-Spec, A-2-style rear sight provides primary or back-up sight-ing with the additional convenience of a carry handle. Full length clamping bar with two, large, easy-to-grasp, thumb nuts gives fast installation with instant return to zero. Correct height for issue front sight. Fits all flat top rifles and carbines with a Picatinny base. abSPECS: Steel sight parts, Parkerized, matte gray finish. Aluminum handle, hardcoat anodized and Teflon®-coated, black, matte. 7" (17.8cm) long. 9 oz. (256 g) wt.

DPMS AR-15/M16

DETACHABLE CARRY HANDLE

Back-Up Iron Sights & Comfortable Carry For

Your Flattop

#231-000-030AV AR-15 Detachable Carry Handle, 1C94C69 � � � � � � � � � � � � � � � � � � � � � � � � � $ 112.99

Detachable carry handle fits flattop Colt AR-15 rifles and car-bines. Clamps securely to the receiver rail using two easy-to-grasp thumb nuts. Rear sight has standard small and large military aper-tures, plus A2-style adjustment mechanism for easy windage and el-evation changes. Made of rugged forged aluminum with a hardcoat anodized finish for abrasion resistance; all steel components have a durable black oxide finish. abSPECS: Forged aluminum body, hardcoat anodized, matte black. Steel components, black oxide finish. 7" (18.8cm) OAL x 1.1" (2.8cm) wide x 1.75" (4.4cm) high.

COLT AR-15/M16

CARRY HANDLE ASSEMBLYOriginal Factory Part

Converts A Flattop To A2 Configuration

#160-303-040AV Carry Handle Assy, 6A120M75 � � � � � � $ 148.99

If you love fine leather, fine craftsmanship and a superbly functional, useful sling, our Competitor Plus is going to make you extremely happy! What you get is a no-compromise reproduction of the original 1907 Military Sling; the one that’s become the standard among hi-power service rifle shoot-ers and many knowledgeable hunters; the one that’s sought after by collectors and restorers of pre-WWII military firearms and the one that’s car-ried more guns, more miles on more shoulders than darn near any other. Ours has all the good stuff: (1) It’s all U.S. made of the finest, oak-tanned, top grain, 9-10 ounce, U.S. steer hide. (2) It’s fit-ted with thick, forged, blued steel hooks. (3) Each extra-thick, steel hook is attached with three rivets. (4) The Keepers are skived at a taper, overlapped and glued; then stitched with 5-cord waxed linen

thread. They fit TIGHT! The Competitor Plus sling is also available with 16 numbered reference points, making it easy to return to your preferred sling setting for each shooting position. Also available with two 11/4" easy-on, easy-off, quick-detachable sling loops. abSPECS: 1¼" (3.2cm) wide. 9-10 oz. leather. .108" (2.75mm) thick hooks. Front strap length = 54" (1.37m). Instructions.

COMPETITOR PLUS ™ RIFLE SLING

• PREMIUM LEATHER • EXTRA-HEAVY HOOKS

• STITCHED KEEPERS • U.S. MADE

#084-270-110AV Tan Competitor Plus Sling, 4H59L19 � � $ 66.99#084-270-210AV Blk Competitor Plus Sling, 4H54Q99 � � 60.99#084-270-120AV Tan Numbered Competitor Plus Sling,

4H60D39 � � � � � � � � � � � � � � � � � � � � � � � � � � 66.99#084-270-112AV Tan Competitor Plus Sling w/ 11/4"

Swivels, 4H73M59 � � � � � � � � � � � � � � � � � 81.99#084-270-211AV Blk Competitor Plus Sling w/ 11/4"

Swivels, 4H64F79 � � � � � � � � � � � � � � � � � � 71.99

Adjustable single-point sling is constructed of heavy-duty 11/4" nylon webbing and 1" elliptical elastic bungee cord for optimum performance and stealth. High-density bungee allows 4" of flex—just right for weapon agility in CQB maneuvers—and is covered with tough, weather-resistant compressed tubular nylon sheathing that prevents noise, limits bounce, and provides optimum retention. Strong, single-piece, quick attach/detach “mash” clip snaps se-curely to any single point sling adapter to keep your weapon within easy reach when you need it most. Elastic sleeve slides over clip to prevent rattling against gun. Heavy duty tri-glide nylon buckle al-lows adjustment to permit wear over bulky tactical vests and gear on all body sizes. A 300-lb test nylon “quick ditch” buckle instantly opens the sling if you need to release your weapon quickly.SPECS: Nylon and elastic bungee cord, black. Carry strap is 11/4" (3.2cm) wide. Adjustable from approximately 46" (117 cm) to 64" (163 cm) diameter.

BLACKHAWK INDUSTRIES STORM SINGLE-POINT TACTICAL SLING

Quiet, Adjustable, Dependable Weapon Retention

#100-003-349AV Storm Single-Point Tactical Sling, 7K27C76 � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99

Two-point sling with quick adjustment strap lets the operator change sling length without creating loose ends that can tangle with other gear. Allows for a variety of carry and shoot-ing positions based on the required tactical response. Fits rifles and carbines with side sling swivels that have 11/4" wide loop. Composed of two, separate sections of Cordura® nylon webbing; 17" forearm end, including quick adjustment loop, and 30" rear buttstock end; joined together with a high-strength steel loop. The sliding adjustment buckles are made of tough molded Acetal military-grade hard polymer. Combat-proven; deployed with all branches of U.S. military. Developed by Larry Vickers, noted firearms expert and former operational member of 1st SFOD Delta (aka “Combat Applications Group”). For added comfort, Padded model adds a 2" wide closed-cell foam pad inside a tubular nylon webbing sleeve. abSPECS: Cordura® nylon web. Steel mid-section connector. Acetal hard polymer adjustment hardware. 11/4" (3.1cm) wide. Adjusts 39" (99cm) to 65"(165cm) OAL.#100-009-562AV Vickers Sling, Black, 7A44C59 � � � � � � � $ 45.99#100-009-563AV Vickers Sling, Coyote, 7A44J59 � � � � � � 45.99#100-017-893AV Padded VCAS, Black, 7A52J64 � � � � � � � 55.00#100-017-894AV Padded VCAS, Coyote, 7A52F64 � � � � � 55.00#100-017-896AV Padded VCAS, O.D. Green, 7A53N84 � � 58.00#100-017-895AV Padded VCAS, Multi Camo, 7A53A94 � � 58.00

BLUE FORCE GEAR AR-15/M16

VICKERS COMBAT APPLICATIONS SLINGAdjusts Quickly, Won’t Tangle Or Twist

SLIN

GS

& A

DA

PT

ER

S

AR

-15/M

16


brownells.com

Low-profile adapter gives an AR-15/M16 with an A2-style buttstock the convenience and versatility of single-point clip-on sling attachment. Lets you combine the stable cheekweld of a fixed rifle buttstock with the ease of the latest, quick-attach tac-tical slings. Precision machined from 4140 carbon steel for extra strength, with extra metal on the attachment loop, so no matter how hard you pull or twist the sling, this adapter won’t break. Right Hand (RH) model has the loop on the left side to accommodate right-handed shooters; Left Hand (LH) model has the loop on the right for left-handed shooters. Requires no permanent alterations to rifle: simply remove the buttstock, slide the adapter over the receiver extension tube, and reinstall the stock using the included spacer and extended buttplate screw. abSPECS: 4140 steel, black oxide finish.

AR-15/M16

A2 SINGLE-POINT SLING ADAPTERGives Your Fixed-Stock Rifle

The Versatility Of Quick-Detach Sling Mounting

#080-000-687AV RH A2 Single-Point Sling Adapter, 8K37M99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 39.99

#080-000-658AV LH A2 Single-Point Sling Adapter, 8K37E99 � � � � � � � � � � � � � � � � � � � � � � � � � 39.99

Nylon web sling adjusts from carry to firing while moving into position. After firing, a quick tug on the lanyard returns sling to carry position. Designed to carry gun, muzzle down on your back. Pad-ded model features a closed-cell foam shoulder pad for greater comfort when carrying heavy weapons long distances. Upgraded Padded has metal buckles and hardware, plus a textured rubber pull tab to aid in fast adjustments. Buttstock Adapter provides a correct, top-of-stock sling mounting point on fixed-stock rifles and shotguns. abSPECS: Nylon web, Black (BLK), Coyote, O.D. Green (ODG), or Foliage Green (FolGr). 1" (2.5cm) wide. Padded model includes 20" (50.8cm) long x 17/8" (4.7cm) wide shoulder pad. Adjusts 58" (147cm) to 63" (160cm).

VIKING TACTICS

V-TAC QUICK ADJUST SLING

Simple One-Hand Transition From Firing Position To Carry

V-TAC Sling

#100-000-669AV V-TAC Sling, BLK, 7K37J78 � � � � � � � � � � $ 39.99#100-005-403AV V-TAC Sling, Coyote, 7K37J78 � � � � � � � 39.99#100-005-404AV V-TAC Sling, ODG, 7K34N99 � � � � � � � � 34.99#100-005-405AV V-TAC Sling, FolGr, 7K37M78 � � � � � � � � 39.99#100-002-868AV Padded V-TAC Sling, BLK, 7K42M41 � � 44.99#100-005-406AV Padded V-TAC Sling, Coyote,

7K42G41 � � � � � � � � � � � � � � � � � � � � � � � � � � 44.99#100-005-407AV Padded V-TAC Sling, ODG, 7K42B41 � � 44.99#100-005-408AV Padded V-TAC Sling, FolGr, 7K42Q41 � � 44.99#100-007-482AV Upgraded Padded V-TAC Sling, BLK,

7K46Q50 � � � � � � � � � � � � � � � � � � � � � � � � � � 49.99#100-000-670AV V-TAC Buttstock Adapter, Black Only,

7K10C17 � � � � � � � � � � � � � � � � � � � � � � � � � � � 10.99

Efficient, easy-to-use tactical sling is designed for law enforce-ment and military personnel who need a secure, economical sling that fits a variety of tactical rifles and shotguns. Installs quickly on any weapon with a fixed or collapsible stock that has 11/4" sling loops. Configure for basic two-point operation, or use the included clip-on strap for single-point carry that lets the shooter free the weapon from the sling with a squeeze of two fingers. Ambidextrous design shifts easily from one shoulder to the other for strong- or support-side carry. Made of durable, military-grade nylon webbing with rein-forced zig-zag stitched seams and heat-sealed edges. “Strike Zone” section of two thick elastic cords fully encased by webbing material provides extra stretch for maneuvering the weapon during CQB or when fast transition from carry to shooting position is required. Heavy duty molded polymer slip locks allow plenty of adjustment for operator comfort and secure attachment to weapon. All hardware has smooth, rounded edges to prevent snagging on other gear. abSPECS: Nylon webbing, molded polymer hardware, black or coyote tan. Kit includes main sling body and detachable single-point strap section.

SPEC-OPS PATROL SLINGSingle- & Two-Point Modes For Secure,

Comfortable Weapon Retention

#100-004-451AV Patrol Sling, Black, 7K31A99 � � � � � � � � � $ 34.99#100-004-452AV Patrol Sling, Coyote, 7K28J99 � � � � � � � 31.99

Low-profile endplate has a receptacle for a quick-detach pushbutton sling swivel directly below the receiver extension tube for fast, convenient, ambi-dextrous sling attachment, with full 360° of rotation. Made of solid steel to enable proper staking of buffer

tube lock nut on the lower receiver. QD swivel not included. abSPECS: Steel, Parkerized, matte black finish. Fits mil-spec AR-15/M16 lower receiver.


ENDPLATE/QD SLING ADAPTERFor The "Minimalist" Approach To Sling Attachment

#100-016-335AV Gunfighter QD End Plate, 1E16P21 � � � � $ 16.99

Simple Lanyard and Carrying strap™ (SLC) features a steel, HK-style snap hook for quick and effortless transition from a conventional two-point sling to a single-point sling position that keeps your tactical rifle or shotgun in front of you for easy cross-shoulder transition. Conventional, two-point sling position allows muzzle-up or muzzle down carry over the shoulder or across the back. Polycarbonate clasps allow easy adjustment to fit any shooter. Built from durable, 1" wide, nylon webbing for maxi-mum strength and long service life. Ambidextrous design accom-modates right- and left-hand shooters. abSPECS: Nylon webbing with steel snap hook and polycarbonate adjust-ment clasps, black. 44" (112cm) long x 1" (2.5cm) wide.

GALCO INTERNATIONAL

SLC TACTICAL SLINGAllows Hands-Free Carry & Quick

Weapon Access

#100-003-978AV SLC Tactical Sling, 7A26G50 � � � � � � � � $ 27.99

Steel, sling adapter replaces the issue, receiver plate to provide a rock solid at-tachment point for fast handling, tactical slings on CAR-15 rifles. Ambidextrous slots

accept 11/4" wide webbing, rings accommodate carry straps with snap fasteners. Allows the sling to be switched from right or left side of receiver in seconds. Keeps sling tangle-free and provides the proper balance and stability for hands-free carry. abSPECS: Steel, Parkerized finish. 29/16" (6.5cm) long, 21/16" (5.2cm) high, 3/32" (2.4mm) thick. Fits CAR-15 rifles.

GRSC CAR-15/M4

CAR AMBIDEXTROUS SLING ADAPTERAllows Rapid Switch From Right- To

Left-Hand Carry

#100-001-467AV CAR-15 Amb. Sling Adapter, 6A7B49 � � � $ 9.79

Machined from a single piece of 1018 billet steel, this limited rotation QD end plate has no parts to work loose or gaps to rust and corrode. Limited rotation permits easy, ambidextrous use without sling wrap-up. End plate’s slightly thicker design provides for proper staking and added strength.

The durable, black melonite finish matches the receiver and en-hances resistance to rust, corrosion, and wear. ab

IMPACT WEAPONS COMPONENTS AR-15/M4

LIMITED ROTATION QD END PLATEPrevents QD Sling Swivel Rotation

& Sling Wrap Up

#100-013-594AV Limited Rotation QD End Plate, 2C17M97 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 18.95

The D3 is a versatile 2-to-1 point sling that lets you seamlessly transition between the two carry configurations. It's a plug-and-play sling with hardware already attached, including two positive-locking QD swivels and the proven SDI single-hand, quick-adjustment system. Inspired by climbing har-nesses, the low-profile pad is made of a five-layer laminated, stretchy, woven fabric that's strong and without being bulky. abSPECS: Ballistic nylon, black or coyote. Steel hardware, black. 1" (2.5cm) wide strap. 2" (5.1cm) wide pad.

Provides Stability & Comfort Without Adding Bulk

#100-019-788AV D3 Sling, Black, 2D89C99 � � � � � � � � � � � $ 89.99#100-019-789AV D3 Sling, Coyote, 2D89M99 � � � � � � � � � 89.99

HALEY STRATEGIC PARTNERS D3 SLING

Durable tactical slings provide a comfortable carry options while ensur-ing rapid, smooth transi-tions to a shooting stance. These slings are manu-factured from durable, mil-spec materials, featuring close-weave nylon web-bing, heavy-duty 800-lb. tensile strength elastic, double stitching and shockproof polymer hardware that won’t rattle or rust. Quick-release buckles can be disengaged with one hand, and tri-glide slip locks let the opera-tor adjust overall length quickly for rapid shifts from strong side to support side and back. A-Tac – Single-point sling fits any weapon that accepts an HK-type snap hook. Provides maximum range of weapon movement for fast transition from many carry positions, including over either shoulder, across the back, under the oppos-ing arm, and around the neck. Three-point polymer buckle allows selective release of the left side of the strap, the right side, or both simultaneously to free the weapon from the sling. Duty – Basic two-point sling of straight 11/4" wide nylon webbing attaches easily to USGI sling swivel. Loops through rear swivel, secures at front with two steel screw closures. abSPECS: Mil-spec nylon webbing, polymer hardware, black.

A-Tac

#683-000-016AV A-Tac Single-Point Sling, 3A14K65 � � � � $ 17.29#683-000-017AV Duty Two-Point Sling, 3A8Q21 � � � � � � � 8.99

Duty

OUTDOOR CONNECTION

TACTICAL SLINGSSingle- & Two-Point Models

For Comfortable, Secure Carry & Fast Transitions

Specter Gear pro-vides heavy-duty, nylon-web slings, with durable, polycarbonate clasps and keepers that hold your weapon in a comfortable, ready posi-tion until it’s time to fire. Double-stitched with #69 thread at all stress points for maximum strength and a long service life. Available in a number of tactical styles for a wide variety of guns. All slings are configured for am-bidextrous use. ab

CLOSE QUARTERS COMBAT (CQB) SLING - Provides a choice of six carry options. Lets you keep your hands free and bring the weapon into action quickly. Soft and flexible for quiet, comfortable carry; will not generate a noise signature. Easily adjustable with no unnecessary straps, buckles or fasteners. Fits all M16 variants, as well as AR-15s with A2-type fixed rifle stock, round or triangular handguards, and bottom-mounted front sling swivel. SPECS: Nylon web, Velcro fasteners, black. 11/4" (3.2cm) wide. Approxi-mately 38" (96.5cm) long.#100-000-376AV CQB Sling for AR-15 w/Fixed Rifle

Stock, 4K24I22 � � � � � � � � � � � � � � � � � � � � $ 29.99

SPECIAL OPERATIONS PATROL (SOP) SLING - Wide, 11/2", ny-lon webbing distributes weight for comfort-able carry. 1" mounting straps provide free, non-binding movement, so the sling moves with your body during carry and position shoot-ing. Transition-release buckle lets you quickly shift from right- to left-shoulder carry or firing. Sling remains attached so you can drop the rifle to your side and keep both hands free. ERB "emergency release buckle" lets you disengage from the fire-arm in emergency situations. Ambidextrous design fits right- and left-handed shooters. Fits all M16 variants, as well as AR-15s with A2-type fixed rifle stock, round or triangular handguards, and bottom-mounted front sling swivel. SPECS: Nylon web, Velcro fasteners, black. 11/2" (3.8cm) wide. Approxi-mately 38" (96.5cm) long. CAR-15 fits M4-style collapsible stock only.#100-000-797AV SOP Sling for AR-15 w/Fixed Rifle

Stock, 4K30K13 � � � � � � � � � � � � � � � � � � � � $ 36.99

GEN II VIPER SLING - Single-point, nylon sling with two elastic shock cords lets you wear the sling a little tighter, yet easily allows cross shoulder transi-tion. Heavy-duty double-ring mash hook clips se-curely to any loop-style sling adapter. Built-in release buckle lets you disconnect the weapon quickly and keep the sling on your body—ideal for fast mounting/dismounting from vehicle or transition to unconven-tional shooting position. A second, “emergency” release buckle in the loop itself allows quick egress from the entire sling. 11/2" wide nylon webbing provides optimal comfort with heavier weapons. Additional Mash hook attachments available separately, below.SPECS: Nylon web, polycarbonate buckles and clasp, black. Steel Mash hook. 30" (76cm) diameter, 11/2" (3.8cm) wide.#100-005-966AV Gen II Viper Sling, 4K30D76 � � � � � � � � � $ 39.99

SPECTER GEAR

TACTICAL SLINGSKeeps Your Hands Free & Your Weapon Ready

SLING

S & A

DA

PT

ER

S

AR

-15

/M16


SINCE 1939

M4-style receiver plate includes the engage-ment tab required to align the buttstock and buffer

tube with the lower receiver on carbine models. Precision, fine-blanking process ensures precise edges and superior flatness for correct fit and solid installation. abSPECS: Steel, black oxide finish.

CAR-15 RECEIVER END PLATEMaintains Proper Alignment Of Stock & Buffer

Tube

#080-000-290AV CAR-15 Receiver End Plate, 8K4E99 � � �$ 5.99

Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tube. Precision machined from high-quality steel, then Parkerized dark gray for wear resistance and a close match to fac-tory rifle finishes. abSPECS: Steel, black, matte, Parkerized finish.

CROSSTAC CAR-15/M4

AMBIDEXTROUS SINGLE-POINT SLING CONNECTOR

Ultra-Low Profile, Snag-Free Design

#100-003-181AV CAR-15/M4 Single-Point Sling Connector, 5A18F99 � � � � � � � � � � � � � � � �$ 18.99

Aluminum mount clamps directly to the receiver extension tube of an adjust-able-stock carbine to provide an ambi-dextrous, near-receiver attachment point for a single point sling. Installs in seconds and requires no disassembly of the stock or tube—ideal for agencies, departments, and military units that are restricted from modi-fying issued weapons. Built-in rotation limiter lets you position swivel horizontally or vertically to prevent sling tangling and maintain optimal weapon control. The included heavy-duty quick-detach, push-button swivel accepts slings up to 11/4". abSPECS: Mount – 6061 T6 aluminum, hardcoat anodized, matte black. 5/8" (1.6cm) long, 21/8" (5.4cm) wide, 2" (5cm) tall. 2.8 oz. (79g) weight. Fits mil-spec and commercial receiver exten-

sion tubes for M4-type adjustable buttstock. QD Swivel – Steel, matte black oxide finish. Accepts slings up to 11/4".


EZ CARBINE SLING MOUNTClamps On Any Adjustable Stock

Carbine In Seconds

#100-005-805AV EZ Sling Mount, 8K71C00 � � � � � � � � � � � �$ 71.00

Hard anodized, 6061 alumi-num sling adapter clamps to col-lapsible stock buffer tubes with no need for special tools or to remove the buffer tube. Two models available: Loop for claw-type clasp; or Slot for conventional web slings. Adapters can be used with single-point, two-point, or three-point tactical slings and are ambidextrous for use with right- or left-hand operation. Does not interfere with normal operation of collapsible stock. abSPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.

END PLATE SLING ADAPTER - Ambidextrous, quick-detach sling swivel can be mounted on either side of the mounting plate on adjust-able M4-type buttstocks so you can position your sling for optimum comfort and versatility. Hard coat anodized, 6061 aluminum body with a matte black finish holds up to the toughest use and won’t crack or break over years of shooting. Won’t interfere with the operation of stock and works well with single-point, two-point, or three-point tactical slings.SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.#100-002-613AV End Plate Sling Adapter Quick-

Detach, 2A36C35 � � � � � � � � � � � � � � � � � � � $ 37.99

MCTAR-30HD SLING ADAPTER - No gunsmith-ing required, extra heavy-duty ambidextrous sling swivel mount simply clamps onto the buf-fer tube. Includes 11/4", mil-spec., push-button, quick-detach sling swivel that can be mounted on either side or the center of the adapter body. Fits adjustable M4-type buttstocks Hard coat anodized, 6061 alu-minum body with a matte black finish is built to take extreme duty use without failure. Won’t interfere with the operation of stock. Makes an excellent choice for adding an easy quick-release fea-ture to any single-point, two-point, or three-point tactical sling. Made in the USA.SPECS: 6061 aluminum, hard anodized, matte black. Fits 4- or 6-position collapsible stocks. No gunsmithing required.#100-002-876AV MCTAR30HD Sling Adapter,

2A54P95 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 57.99


SLING ADAPTERInstalls Easily; Choose Your

Sling Position On Collapsible Stocks; Made In The U.S.A

#100-002-123AV Sling Adapter, Loop, 2A33N40 � � � � � � $ 34.99#100-002-122AV Sling Adapter, Slot, 2A34A81 � � � � � � � � 36.99

ab

ab

Single-loop, right-hand replacement for the factory receiver plate gives an AR fitted with an M4-type collapsible buttstock a con-venient, low-profile attachment point for clip-on, single-point slings. Precision machined from 1018 carbon steel for superior strength and an exact fit, with a durable manganese

phosphate Parkerized finish that resists surface abrasion and cor-rosion, and matches the finish on mil-spec anodized receivers. abSPECS: 1018 steel, Parkerized, matte black finish. Fits AR-15/M16/M4 and clones fitted with M4-style collapsible buttstock.


SLING ADAPTER END PLATEIncreases Sling-Attachment Versatility On

Collapsible-Stock Rifles & Carbines

#100-004-532AV RH Sling Adapter Plate, 2Z10E69 � � � � � $ 11.99

Ambidextrous Sling Attachment Point helps the operator adapt quickly to changing tacti-cal situations by rapidly switching weapon from one shoulder to the other. An unrestricted 180° of sling movement lets you change shoulders to take maximum advantage of available cover, ad-

dress targets around corners and other barriers, or shift weapon position if one arm is injured. Works with any single-point sling that attaches with a quick-release snap-hook, and fits any AR with an M4-type adjustable buttstock. Remove factory receiver end plate and replace with the ASAP; keep the original receiver extension, buttstock, and sling. ASAP® QD provides the same functionality for a sling with a quick-detach, pushbutton swivel, such as the Magpul MS4® Dual QD GEN 2 Sling and the MS1® Multi-Mission Sling with the QD swivel option. Socket is angled slightly downward for better clearance and freedom of motion. abSPECS: Precision cast, case-hardened steel, black Melonite™ finish. Fits both mil-spec and commercial/universal M4-type receiver extensions.

MAGPUL AR-15/M16

ASAP® SLING ADAPTER

#100-004-450AV ASAP Sling Adapter, 9Z24G93 � � � � � � � $ 28.45#100-015-153AV ASAP QD Sling Adapter, 9Z24A93� � � � 28.45

Gives You A Major Tactical Advantage With 180° Of Unrestricted Sling Movement

Low-profile ambidextrous mount replaces the factory receiver end plate to allow easy at-tachment of a QD sling swivel to the rear of the receiver. Won’t interfere with access to weap-on’s controls, and won’t snag on foliage, vehicle, or other gear. Made of steel to allow proper staking of buffer tube lock nut on the lower receiver. Compatible with mil-spec lower receivers with M4-style collapsible stocks. Lets collapsible stocks collapse fully. abSPECS: Steel, Parkerized, dark gray finish. Fits AR-15/M16 with M4-type collapsible stock. End plate and swivel sold separately.

Replacement Receiver End Plate For Mounting Pushbutton Sling Swivel

#100-004-756AV QD Receiver End Plate, 1A24K51� � � � � $ 25.99

NOVESKE AR-15/M16

QD SLING ADAPTER

PWS's updated mounting system enables you to install a commercial OR mil-spec re-ceiver extension ("buffer tube") quickly and easily without hav-ing to stake the castle to the end

plate. The underside of the nut has serrations that engage a pin on the end plate. Get the tube correctly oriented, tighten the castle nut down using a standard stock wrench (not included - you'll have to provide your own), and it locks securely in place. It's easy to remove if you ever want to change the buffer tube. End plate has an integral socket for a QD pushbutton sling swivel. Steel construction with a matte black finish. Fits M4-type carbine receiver extensions and standard mil-spec lower receiver. ab

PRIMARY WEAPON SYSTEMS AR-15/M16

RATCHET LOCK CASTLE NUT & END PLATE

Eases Installation of Buffer Tube - Eliminates Staking of

Castle Nut

#100-031-925AV Ratchet Lock Castle Nut/End Plate, 4B24G71 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 25.99

All-steel receiver endplate has rear-extending sling loop that allows 180° of movement for ambi-dextrous use. Fits AR-15s and M16s with collaps-ible stocks. Works best with clip-on single-point slings. ab

SPECS: Steel alloy, phosphate finish, matte black. Fits AR-15 type rifles with M4-style adjustable stock.

TAPCO AR-15/M16

INTRAFUSE ENDPLATE SLING ADAPTER

All-Steel Single Point Sling Adapter For Collapsible Stocks

#100-009-079AV Intrafuse Endplate Sling Adapter, 5A11B34 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 12.89

Heavy-duty sling adapter slides over collapsible stock buffer tubes to provide secure, ambidextrous attachment for the push-button QD sling swivel. No gun-smithing required—simply tighten down the steel crossbolt with the included hex key wrench. Solid aluminum construction with plenty of extra metal at the stress points to ensure this mount won’t twist, flex, or bend under pressure. Beveled and rounded edges help resist snagging on sling or other gear. Indexes to upper receiver to prevent unwanted rotation of buffer tube. Stainless steel swivel with non-reflective black finish allows a full 360° of rotation. abSPECS: Aluminum, hardcoat anodize, matte black or dark earth, with stainless steel sling swivel, matte black finish. Accepts slings up to 11/4" (3.2cm) wide.


PROFESSIONAL-GRADE SLING ADAPTER

Provides Quick-Detach, Ambidextrous Sling Mounting; Built To Handle The

Stress Of Tactical Use

#100-004-055AV Pro-Grade Sling Adapter, Black, 3B41N98 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 46.99

#100-004-056AV Pro-Grade Sling Adapter, Dark Earth, 3B41D98 � � � � � � � � � � � � � � � � � � � � � � � � � � 48.99

Like many of V Seven's AR-15 upgrade parts, their M4-style carbine endplates are machined from Grade 5 Titanium to provide the optimal combination of strength with the bare minimum of weight. The mil-spec dimension endplate is 50% lighter than a com-parable steel endplate. At the bottom there's a socket

for a standard QD pushbutton sling swivel, so you get maximum util-ity without adding bulk to your rifle. Combo Pack contains endplate plus a V Seven Titanium castle nut. ab

SPECS: Fits M4-type carbine buffer tube and mil-spec AR-15 lower re-ceivers.


TITANIUM END PLATESMinimal Bulk & Weight, Maximum Utility & Strength

Endplate, Black

#100-500-025AV QD Endplate, Black, 7G00HEN � � � � � � $ 35.89#100-500-024AV QD Endplate, Silver, 7G00JJN � � � � � � � 31.04#100-500-006AV QD Endplate/Castle Nut Combo,

Black, 7G67K90 � � � � � � � � � � � � � � � � � � � � 67.90#100-500-005AV QD Endplate/Castle Nut Combo,

Silver, 7G58P20 � � � � � � � � � � � � � � � � � � � � 58.20

Endplate/Nut Kit, Silver

SLIN

GS

& A

DA

PT

ER

S

AR

-15/M

16


brownells.com

Extra-wide steel swivel accepts slings up to 15/8" wide for attachment to a Com-mand Arms Modular Buttstock or similar

component that accepts a standard push button swivel. Smooth-operating, centrally located button and polished ball-bearing lock-ing mechanism ensure easy attachment.SPECS: Steel, black oxide finish. Accepts slings up to 15/8" wide.


PUSHBUTTON SLING SWIVELFor Secure, Quick-Detach Installation

Of Extra-Wide Slings

#100-004-881AV Pushbutton Sling Swivel, 6C14L29� � � �$ 19.99

Solid, one-piece aluminum mount with steel, pivot pin and swivel attaches to any Picatinny accessory rail for in-stant sling attachment. Nylon tip set screw locks mount to rail. Quiet, rubber-coated swivel prevents metal-to-metal slap and eliminates sling wear at point of contact. Accepts slings up to 11/4" wide. abSPECS: Base - Aluminum. Swivel/Hardware - Steel. Matte black finish. 9/16" (1.4cm) long, 11/4" (3.2cm) wide, 15/8" (4.1cm) high. Fits slings up to 11/4" wide.


RAIL SLING ADAPTERLocks To Accessory Rail For Instant Sling

Attachment

#573-000-034AV Rail Sling Adapter, 3G17G50 � � � � � � � � $ 23.00

Aluminum adapter threads on the rear strap of any 1" wide sling to quickly convert a 2-point sling into a highly maneuverable single-point sling, and back. “Universal” socket accepts any pushbutton QD sling swivel, HK-style clip, and MASH connectors – amazingly handy and easy to use. Instructions included. Separate models for 1" and 1¼" wide slings. abSPECS: 6061 T6 aluminum, Type III hardcoat anodized, black. 27/32" (2.1cm) long, 11/2" (3.8cm) high.

IMPACT WEAPONS COMPONENTS

2-TO-1 POINT TRIGLIDE ADAPTERConverts Your 2-Point Sling To A

Single-Point Sling

#100-006-831AV 1" Triglide Sling Adapter, 2C19L25 � � � $ 19.99#100-007-208AV 1¼" Triglide Sling Adapter, 2C18J53 � � 19.99

Swivel studs with cross drilled mounting holes allow vertical or side carry. Accepts Uncle Mike’s-style QD sling swivels (sold separately). Front swiv-

el stud attaches to free float or A2-style detachable handguards. Re-quires drilling a single mounting hole in free float tubes. Rear QD sling stud replaces fixed military-type without modification to stock. abSPECS: Steel, parkerized, dark gray finish.


QUICK RELEASE SLING SWIVEL STUDSTough, Parkerized Finish, Greater Sling

Attachment Options

#923-000-027AV Parkerized Front Swivel Stud, 3B11H95 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 13.29

#923-000-028AV Parkerized Rear Swivel Stud, 3B11G95 � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.29

Heavy-duty steel sling swivel features a 1¼" loop and is compatible with standard quick-detach cups commonly found on lower receiv-ers, receiver end plates, buttstocks, and many low-profile forward QD sling mounts, including the Magpul RSA®-QD. Smooth-operating push button and polished ball-bearing lock system allow for secure at-tachment and easy release. Slip one onto each end of Magpul’s MS1™ Multi Mission Sling for dedicated dual-point functionality, or combine with an MS1 MS4™ Adapter to rapidly switch between one- and two-point modes. Mount, sling, and adapter sold separately. abSPECS: Steel, manganese-phosphate finish, black. Accepts slings up to 1¼" (3.2cm) wide. Assembly instructions included.

MAGPUL

QD SLING SWIVELPlugs Into Quick-Detach Sockets To Firmly

Mount Your Sling

#100-013-937AV QD Sling Swivel, 9Z13K06 � � � � � � � � � � $ 14.20

Low-profile sling loop clamps to any MIL-STD 1913 Picatinny or STANAG 4694 handguard rail to provide a secure forward at-

tachment point for the Magpul MS2 or similar clip-on sling. Can be installed on left or right side of top rail, or side or bottom rails for multiple alternate sling configurations. Loop is angled to resist snag-ging on other gear. Rugged, all-steel construction withstands up to 300 pounds of stress pressure, so it won’t fail under hard use. abSPECS: Steel, MIL-DTL-16232 manganese phosphate coated, black. 2" (5cm) long x 1" (2.5cm) wide. Projects 3/16" (4.8mm) from rail. 1.3 oz. (87g) weight.

MAGPUL

RSA® RAIL SLING ATTACHMENTClamp-On Loop Lets You Attach Your Sling

Where You Need It

#100-006-197AV Magpul RSA Rail Sling Attachment, 9Z25K61 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 28.45

Specifically made for 11/4" webbing, this clip-in sling attachment point is compatible with ASAP Plate, RSA, MSA, SGA receiver sling mount, and other clip-in attachment points with at least 3/8" loops. Made from mel-onite finished steel and reinforced polymer hardware, clip features a locking bar for added security. Combine with the MS1 sling for a dedicated two-point sling, or with MS1 MS3 adapter or MS1 MS3-QD adapter for a two to one-point convertible sling. abSPECS: Steel and reinforced polymer, melonite finish, black. 2" (5.1cm) long, 1 3/4" (4.4cm) wide, 1/2" (1.3cm) thick.

MAGPUL PARACLIPCompatible With A Variety

Of Sling-Attachment Mounts

#100-013-936AV Paraclip, 9Z8Q69 � � � � � � � � � � � � � � � � � � � $ 9.45

Quick-detach version of Magpul’s RSA loop provides a secure forward attachment point for the Magpul MS4™ and other push-button QD sling swivels. Position the two-piece clamping system anywhere along your 1913 Picatinny rail and in whatever orienta-tion you prefer, then tighten the slotted-head shoulder screw to lock in place. Socket is angled off the rail for comfortable two-point sling use while maintaining convenient, easy access to the push button. Limited rotation ensures the sling doesn’t become twisted or tangled. Made from Melonite-coated steel for wear and corro-sion resistance. abSPECS: Steel, Melonite finish, matte black. 1.8" (4.6cm) long, .7" (1.8cm) wide. 1.1 oz. (31.2g) wt. Fits any 1913 Picatinny rail. Installation instruc-tions included.

MAGPUL

RSA®-QD RAIL SLING AT-TACHMENT

Connects Push-Button Sling Swivels Anywhere On Your Rail

#100-011-577AV Magpul RSA-QD, 9Z25J61 � � � � � � � � � � $ 28.45

Forward connection point for push-button sling swivels mounts directly to Magpul Original Equipment handguards and forends. Simply remove the handguard, center the MSA over desired accessory hole, and tighten two bolts into the anchor nuts for a rattle-free hold. Requires drilling to slightly enlarge MOE slot so it clears the QD post. Low-profile, anti-snag design maximizes us-able grip space, and limited-rotation feature keeps sling strap from twisting. Precision-cast, durable steel is case-hardened and coated with Melonite® for extreme resistance to wear and corrosion. abSPECS: Steel, Melonite finish, matte black. 1.288" (3.27cm) long, .628" (1.6cm) wide, .2" (.51cm) thick. .2 oz. (5.67g) wt. Installation instructions, hardware, and hole saw included. Drill and 1/8" Allen wrench required.

MAGPUL

MSA®-QD MOE® SLING ATTACHMENTAdds Quick-Detach Socket To

Handguards & Forends

#100-015-152AV MSA-QD Sling Attachment, 9Z17M43 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 18.95

Uniquely designed, quick-detach swivel mount limits rotational movement to help achieve optimum weapon balance and control with popular tactical slings. Attach anywhere along railed forearms; robust, aluminum clamping block with hex head cross-bolt locks mount securely to any Picatinny rail. Extra heavy-duty, steel, pushbutton swivel removes quickly, so op-erator can break-away from the sling in emergency situations. Can be mounted for right- or left-hand use and adapts to 2- and 3-point sling configurations. Swivel rotation is limited to approximately 45° to help stabilize the weapon and eliminate sling tangle. abSPECS: 6061 T6 aluminum, Mil-Spec Type III, hardcoat anodized, black. 11/4 (3.2cm) long, 1" (2.5cm) wide, 5/8" (1.6cm) high, 1 oz. (28g) wt.


RAIL MOUNT QD SLING SWIVELHelps Stabilize Weapon To Prevent Gun Roll

#100-002-987AV Rail Mnt QD Sling Swivel, 8K39M00 � � $ 39.00

DON'T KNOW WHAT KIND OF SLING YOU NEED?

Consider your application, activities, environment and how much control versus manuverability you want.Remember our 100% Satisfaction Guarantee!

SLING

S & A

DA

PT

ER

S

Low-profile sling loop clamps to Picatinny handguard rail and provides a secure, versatile for-ward mounting point for a 1" sling. Precision machined from billet aluminum with rounded edges to prevent snagging on other gear. Fixed, non-pivoting design pre-vents rattles and unwanted sling shifting. abSPECS: Aluminum, hardcoat anodized, black. Stainless steel crossbolt, black oxide finish. 1½" (3.8cm) long. .6 oz. (17g) wt.

BLUE FORCE GEAR AR-15/M16

RAIL MOUNT SLING LOOPVersatile, Low-Profile Forward Sling Mount

#100-005-192AV Rail Mount Sling Loop, 7A32B00 � � � � $ 33.99

Ambidextrous, all steel endplate provides secure, balanced sin-gle-point sling attachment, so your collapsible-stock rifle or carbine can be carried tangle-free in the ready position at all times. Special indexing washer with screw interfaces with the rear of the receiver to allow easy installation for right- or left-hand use. SASE-1 features a single slot that accepts conventional 11/4" wide webbing. SASE-2 has loop to accept HK-style hook or carabiner clips. SASE-2E has a larger loop to accommodate large HK-style hooks. abSPECS: Steel, black, matte finish. 21/16" (5.2cm) long, 13/8" (3.5cm) wide, 1/8" (3mm) thick. .7 oz. (20g) wt. Fits AR-15/M16/M4 and clones with col-lapsible stock.

VLTOR AR-15/M16

SINGLE ATTACHMENT SLING ENDPLATE

Unique Indexing Washer Allows Fast, Easy Installation For Right- Or Left-Hand Shooters

SASE-1

#100-003-184AV SASE-1 Slotted Endplate, 3A18I07 � � � $ 22.99#100-003-185AV SASE-2 HK-Style Endplate, 3A17M38 � � 22.99#100-009-339AV SASE-2E HK-Style Endplate, 3A15P94 � � 18.19

SASE-2 SASE-2E

This genuine, Colt factory part is the one used by our GI’s on the M4 carbine to allow attachment of M203 grenade launchers or forward mounted lights and lasers. Steel, two-piece unit clamps directly around the bar-rel between the barrel bands of the Mil-Spec front sight housing. Can be mounted at the right or left side of weapon and features a rubber-coated swivel to eliminate sling abrasion and noise. No modifications or gunsmithing required. Also fits AR 15/M16 rifles with conventional front sight housing. abSPECS: Black, hardened steel. 9/16" (1.4cm) long, 111/16" (4.3cm) wide. Fits barrels .650" (16.5mm) to .750" (19.1mm) diameter.

COLT DEFENSE

USGI BARREL MOUNT SWIVELThe Same, Tactical Sling Mount Used

By Our Armed Forces

#160-000-352AV Tactical Front Sling Mnt, 6A37B04 � � � $ 45.99

Replaces factory receiver end plate and provides secure, ambidextrous at-tachment for the pushbutton QD sling swivel. Made of hardened aluminum with extra metal at the stress points to ensure this mount won’t fail during hard use. Rounded edges resist snagging on sling or other gear. Hardcoat anodized for extra strength and wear resistance, with a matte black finish that matches most factory buffer tubes. Heavy-duty stainless steel swiv-el accepts slings up to 11/4" wide and allows a full 360° of rotation. abSPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 11/4" (3.2cm) wide. Fits M4-style carbines with adjustable buttstock.


M4 END PLATE SLING MOUNTFor Secure, Ambidextrous Attachment Of Slings With

Pushbutton QD Swivels

#100-004-383AV M4 Sling Mount, 3B39I42 � � � � � � � � � � � $ 42.99

AR

-15

/M16


SINCE 1939

SLIN

GS

& A

DA

PT

ER

S

Aluminum mount clamps to any Picatinny rail to provide a front sling attachment point exactly

where you need it. Non-rotating quick-detach swivel has four lock-ing positions and accepts a 11/4" wide sling. Push-button release al-lows quick break-away from sling in emergency situations. Use a slot-head screwdriver to tighten the steel cross-bolt that locks the mount to the rail. Bolt head fits flush with mount body, so it won’t snag on sling or gear. abSPECS: Mount – Machined aluminum, hardcoat anodized, matte black. Swivel/Cross-Bolt – Steel, black oxide finish.


PUSHBUTTON SWIVEL RAIL MOUNT

Tangle-Free Sling Mount Clamps To Accessory Rail Where You Want It

#100-005-083AV Pushbutton Swivel Rail Mount, 3B28G63 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 32.99

Two-piece clamp with single cross-bolt secures adapter to Picatinny handguard rails so you have a front sling attachment point. MCTAR-06 has pivoting, 1¼" wide swivel for direct sling attachment. Rubber coating on swivel prevents noisy, metal-to-metal contact. MCTAR-07 includes a fixed, dome-shaped stud that accepts your own, standard quick-detach swivel. MCTAR-08 includes a 1¼" wide, 360º rotating, push-button swivel for rapid sling removal. MCTAR-08HD has heavy duty base and swivel that stands up to extreme tactical operations. 1¼" wide, quick-detach swivel limits travel to prevent sling wrapping yet allows necessary movement. MCTAR-08HDO has same features as MCTAR-08HD, but is offset from centerline for unobstructed use of weapon light, laser, vertical grip, or other tactical accessories. MCTAR-TS has a fixed, round, 5/16" (7.8mm) ID loop for clip-on, H&K-style or similar quick-release slings. abSPECS: Bases - 6061 aluminum, mil-spec hardcoat anodized, matte black; steel setscrew, matte black oxide. MCTAR-08HD - 7/8" (2.2cm) long x 13/16" (3cm) wide. MCTAR-08HDO - 2" (5cm) long x 1" (2.5cm) wide. Other models - 9/16" (1.4cm) long x 13/16" (3cm) wide. Swivels/Studs - Steel, black finish. Swivels accept slings up to 1¼" (3.2cm) wide.


FRONT SLING ADAPTER

Provides Strong, Reliable Sling Attachment

-06

#100-001-922AV MCTAR-06 Swivel Sling Adapter, 2A29P55 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99

#100-001-923AV MCTAR-07 Stud Mount Adapter, 2A21F99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 21.99

#100-001-993AV MCTAR-08 Swivel Mount Adapter, 2A31N99 � � � � � � � � � � � � � � � � � � � � � � � � � � 31.99

#100-003-198AV MCTAR-08HD Front Sling Adapter, 2A36P99 � � � � � � � � � � � � � � � � � � � � � � � � � � 36.99

#100-004-906AV MCTAR-08HDO Heavy Duty QD Adapter, 2A36H99 � � � � � � � � � � � � � � � � � 36.99

#100-002-428AV MCTAR-TS Front Sling Adapter Loop, 2A34F99 � � � � � � � � � � � � � � � � � � � � � � � � � � 34.99

-07 -07 -07-07

QUICK DETACH SWIVEL - Machined steel swivels with 1¼" loops feature a smooth-operating, cen-t r a l l y - l o c a t e d p u s h - b u t t o n and polished ball bearing surfaces for easy attachment on firearms equipped with quick-detach bases. Provides quiet, 360° rotation of the swivel to eliminate sling tangle and improve all day carry comfort. Standard model features a standard weight loop formed from 1/8" diameter round stock. Base is knurled for a positive grip, even when wearing heavy gloves. Available with polished blue finish. Heavy Duty swivel is constructed with an extra beefy base and push-button, plus a 3/16" diameter loop to handle maximum weight and abuse; available with gray Parkerized finish. Heavy Duty Flush Button is same as Heavy Duty, but with push button that is flush with the swivel body for low-profile design that helps eliminate accidental release.SPECS: Steel. Accept slings up to 1¼" wide. Standard - Polished blue. Heavy Duty - Parkerized. Sold singly. Heavy Duty Flush Button – Parker-ized. Sold Singly.#100-003-223AV Standard Swivel, each, 2A10G06 � � � � �$ 10.99#100-003-224AV Heavy Duty Swivel, each, 2A14D03 � � � 14.99#100-008-814AV Heavy Duty Flush Button Swivel,

2A12K99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 12.99

ab

Low-profile, aluminum mount clamps to any Picatinny rail to provide an attach-ment point for a quick-detach, pushbutton sling swivel exactly where you need it. Re-cessed crossbolt and locking bar attach-

ment system installs with a flat-blade screwdriver—no protruding hex nuts to snag other gear. Limits swivel rotation to 45° to help prevent sling tangling. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Steel locking plate, black finish. 13/8" (3.5cm) long x 1" (2.5cm) wide x 1/2" (1.2cm) high.

VIKING TACTICS AR-15/M16

LOW-PROFILE SLING MOUNTInstant Sling Attachment Point On Any

Picatinny Rail

#100-005-521AV Low-Pro Sling Mount, 7K36C95 � � � � � �$ 39.99

Heavy duty, 11/4 inch swivels provide necessary stamina and durability for extended tactical and field use. 500 pounds of pull strength plus stainless steel construction that meets the weather resistance standards of the U.S. Military. SwivelLock® prevents ac-cidental opening, provides fast attachment.SPECS: MIM 4600 stainless steel, matte finish. 11/4" loops.

UNCLE MIKE’S

MIL-SPEC SWIVELSWithstands The Toughest, Most

Demanding Conditions

#593-000-002AV Mil-Spec Swivels, 7K14L73 � � � � � � � � � � � $ 17.39

Universal, four-in-one adapter accepts tra-ditional Uncle Mike’s style sling swivels, quick-release push-button swivels, H&K-style clip-on swivels, or simply thread your sling through the 1" wide loop. Eliminates the need to change sling adapt-ers to match different style sling swivels. Lightweight aluminum clamping block with single cross-bolt locks mount securely to any Picatinny rail. Quick-release push-button swivels, when installed, are limited to 45° rotation to help prevent sling twist. abSPECS: 6061 aluminum, hardcoat anodized, black. 15/16" (3.3cm) long x 11/8" (2.9cm) wide.

Accepts Most Swivel Types

#100-004-331AV VTAC-LUSA Sling Adapter, 7K46H49 � �$ 49.99

VIKING TACTICS AR-15/M16

VTAC-LUSA FRONT SLING ADAPTER

Heavy-duty push button sling swivel made from durable stainless steel fits QD swivel recep-tacles on the Vltor Modstock and other acces-

sories for quick attachment of tactical slings. Features a 11/4" loop to accept a variety of standard sling types. Easy operating push-button allows quick attachment and release. abSPECS: Stainless steel, matte black finish. Accepts slings up to 11/4" wide. Fits quick-detach swivel receptacles on accessories from Vltor, Magpul, LMT, KAC, Midwest Industries, Daniel Defense, GG&G, Uncle Mikes, and others.

VLTOR

QUICK-DETACH SLING SWIVELHeavy-Duty, Dependable & Strong Stainless

Steel Construction

#100-004-880AV Quick-Detach Sling Swivel, 3A13A27 � � $ 15.19

Ultra-low-profile mount clamps to Picatinny handguard rail at 10 or 2 o’clock position to accept a pushbutton style QD sling swivel. Only 1/2" long front to back, takes up only one rail slot, leaving plenty of space for other critical equipment. Can be posi-tioned to help tilt the weapon so it stays slung close to body. Allows unlimited sling rotation for a full range of movement. Easy to install—just clamp it on the rail and tighten the steel crossbolt with the included Allen wrench abSPECS: Steel, black finish. 17/8" (4.8cm) wide, 1/2" long. .9 oz. (26g) wt. Fits any MIL-STD 1913 Picatinny rail cross-slot.

WILSON COMBAT

10/2 QUICK DETACH SWIVEL MOUNTSuper Slim, Takes Up One Rail Slot

#965-000-111AV 10/2 Quick Detach Swivel Mount, 5F49M92 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 54.99

Lightweight, molded polymer brass catcher snaps over ejection port to save brass for reloading. Holds up

to 60 expended shells, and won’t interfere with moving parts on the firearm. No gunsmithing or permanent alterations to install. Attaches to any flattop upper receiver, including those fitted with riser rails. abSPECS: Molded hard polymer, black. Holds up to 60 shells.

E&L MANUFACTURING AR-15/M16

BRASS CATCHERSaves Brass, Keeps It From Hitting Nearby Shooters

#100-005-435AV Universal Brass Catcher, 2A44J51 � � � �$ 54.99

A shell of abrasion- and mildew-resistant, 1000 denier, Ny-taneon nylon surrounds 3/8" of padding on the top and bottom of the case for snug, no-slip protection of your rifle and its expensive optics. Padding on the bottom of the case covers the zipper tracks to protect your rifle from scratches. A double-stitched, nylon carry handle is attached to the case with multi-reinforced stitching; an adjustable, padded sling offers a tactical-carry option. All cases ac-cept rifles with mounted optics and fully unzip to be used as a shoot-ing mat. Standard Rifle case is available in 34", 37", and 41" lengths and features four high-capacity magazine pouches (five on 41" case) with positive-close hook-and-loop patch closures, plus zippered compartments in the front for additional storage. Scoped Rifle case provides 51" of length to accept a scoped rifle with longer barrel and includes two, large, outside cargo pouches for ammo, magazines, and supplies instead of separate magazine pouches.SPECS: 1000 denier, Nytaneon nylon, black.

BLACKHAWK INDUSTRIES

TACTICAL RIFLE CASE

Added Padding Protects Rifle & Optics

STOCK # LENGTH MODEL PRICE#100-002-880AV 34" Std Rifle 7K71H42 $ 84.99#100-002-878AV 37" Std Rifle 7K71B93 $ 85.99#100-002-879AV 41" Std Rifle 7K79H43 $ 100.99#100-000-816AV 51" Scoped Rifle 7K85J73 $ 99.99

Low-profile case provides discreet concealment and maximum protection for a short-barreled AR, a rifle disassembled into upper and lower halves, or other expensive gear during transport. Fea-tures a durable, heavy-duty, water-resistant nylon outer shell and 21/2" thick foam padding that provides a snug, firm hold on the gun. Protects the gun’s finish with a no-scratch lining of brushed Tricot that won’t sag, billow, or deform. Full-length, padded, 1/2" thick di-vider has two mag pouches double stitched to one side, so loose magazines won’t damage your gun. Heavy-duty zipper with large aluminum pull tabs for an easy grasp with thumb and forefinger.SPECS: Nylon exterior, navy blue, Tricot lining. 29" (73.6cm) long x 3" (7.6cm) deep x 11" (27.9cm) high.

BULLDOG CASES AR-15/M16

ULTRA-COMPACT DISCREET RIFLE CASE

Maximum Concealment & Protection During Transport

#100-005-304AV Ultra-Compact Discreet Case, Navy Blue, 7F27D99 � � � � � � � � � � � � � � � � � � � � � � $ 27.99

Cotton-poly bag, supported by steel frame. Holds 70 rounds of .223 brass; easy-open bottom unloads fast. Sepa-rate models to fit carry handle and flattop AR-style rifles. abSPECS: Cotton-poly cloth bag, steel frame, polymer mount, black, matte finish. 41/4" (10.8cm) wide, 31/2" (9cm) long, 71/4" (18.4cm) deep.

Stop Crawling Around On The Ground

#100-000-428AV Carry Handle Brass-Savr, 4K49F26� � � �$ 56.99#100-000-735AV Flattop Mount Brass-Savr, 4K46L49 � � 58.99

3BUCC-LLP AR-15/M16

BRASS-SAVR BRASS CATCHER

Bright, highly-visible yellow insert instantly lets the RSO and other shooters know your weapon is unloaded and safe. Perfect for training exercises and classroom activities where it’s vital to quickly identify that weapons are safe at all times. Blocks the chamber to ensure that a round cannot be loaded when the flag is installed. Completely seals the ejection port to keep out dust, dirt, and other debris. abSPECS: Plastic, yellow.

AR-15/M16

DUST COVER SAFETY FLAG

#084-000-300AV Dust Cover Safety Flag AR15/M16, 4H9I99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 10.99

Highly Visible Indicator Shows Rifle Is Unloaded & Seals Ejection Port To Keep Out Dirt

RA

NG

E &

TR

AIN

ING

GE

AR

Instructional video available at brownells.com


brownells.com

AR

-15/M

16

Safety orange, plastic flag clearly indicates, either close up or at a dis-tance that there is no ammunition in the chamber. Ideal for range and classroom safety when identifying that a weapon is clear is of ut-most importance. SafePort cannot be placed in chamber if there is a round loaded, but can be used when a loaded magazine is in the rifle and will eject from the chamber when the bolt is charged. Safe Port can be marked with serial numbers for ease of identification in storage. abSPECS: Plastic, safety orange. Fits AR-15/M16 rifles.

AR-15/M16 SAFE PORTClearly Marks Rifle As Unloaded;

Ejects When Bolt Is Charged

#084-000-194AV SafePort, 4H13E79 � � � � � � � � � � � � � � � � � $ 14.99

Lightweight steel, brass deflector redirects empty rounds to one place for easy pickup. Protects skin and clothes

from hot, discharging brass. Installs with little to no gunsmithing; attaches to either picatinny rail or carry handle, depending upon model ordered. Models to fit A2 (carry handle) and A3 (flattop) re-ceivers; EOTech model is designed to sandwich between a flattop rail and an EOTech Holographic Weapon Sight. abSPECS: Steel, black, matte. Available for guns listed below.

TC ACCESSORIES AR-15/M16

BRASS DEFLECTORCollects All Your Empty Brass In One Area; Saves Yourself & Others From

Being Burned

#100-001-133AV A2 Brass Deflector, 9K16K76 � � � � � � � � $ 20.39#100-001-134AV A3 Brass Deflector, 9K16I76 � � � � � � � � � 20.99#100-002-568AV EOTech Brass Deflector, 9K17N50 � � � 22.99

Latest version of the famous Maglula BenchLoader makes it easy for you to load a 10-, 20- or 30-round magazine in less than 30 seconds. Load hundreds of magazines a day without the pain, pinched fingers, or bruises of hand-loading—perfect for military/law en-forcement armorers, shooting ranges, and any high-volume AR-15 shooter. Foolproof design, with only one moving part, makes it impossible to load magazines incorrectly and requires no maintenance. The BenchLoader is gentle on feed lips, and its open loading tray makes it easy to inspect rounds for defects prior to load-ing. Numbered indicators show the number of rounds in the tray, so no more guessing how many rounds have been loaded. Easily handles a vast array of 5.56/.223 AR-15/M16/M4 magazines, including metal USGI-pattern mags like those made by Brownells, Magpul PMAGs, older Lancer models (may not work on new L5AWM), Surefire 60- and 100-round mags, SA80, H&K metal 416 (may not work on H&K plastic), and most polymer magazines. Easy to operate, even when wearing gloves in cold weather, and it’s portable, too, so it fits easily in your range bag. SPECS: Reinforced molded hard polymer, black. Stainless steel magazine retention bar. 16.5" (42cm) long. 12.7 oz. (360g) wt. Does not load blank rounds; may not load rounds with irregular bullet styles. #100-016-523AV Maglula BenchLoader, 9A133C00 � � $ 133.00

Takes The Pain Out Of Loading All Types Of AR-15/M16 Magazines - Including PMAGs!

MAGLULA AR-15/M16

BENCHLOADERTM Convenient, professional-grade cleaning system contains ev-erything you need to thoroughly clean an AR-15 to ensure it oper-ates with peak reliability and accuracy. We packed this kit with our best, premium-grade components and supplies to help you detail clean all parts of your rifle’s operating system, including bore, cham-ber, gas system, and bolt carrier way. You get a top-quality Dewey cleaning rod long enough for any AR-15 barrel, our own Special Line bronze bore brushes, and our deep-scrubbing all-cotton, flannel patches, plus tools specifically developed for the AR 15. A hold-open link separates the upper and lower receivers and locks them in place so you can clean the bore and chamber the correct way, from the breech. Rugged Delrin® plastic bore guide centers the cleaning rod in the bore and protects the rifling from damage; silicone O-ring seals the chamber and keeps solvent out of the action and trigger. Our upper receiver cleaning tool has a properly sized bronze brush and cotton mop to let you quickly scrub stubborn carbon fouling from the bolt carrier way and lug recesses. Combination bronze and stainless steel chamber brush, originally designed for the USGI M16, makes short work of fouling that can prevent proper extraction of spent shells. All this gear comes packed in a rugged plastic storage/carry box with a roomy top compartment and three slide-out draw-ers with plenty of storage space for extra items. abSPECS: Kit contains Dewey 36" cleaning rod w/jag and 8-32 thread adapt-er, O-ring bore guide, cleaning link, (12) Special Line .22 bore brushes, (3) cotton bore mops, (250) 11/4" round cotton patches, (6) gas tube cleaners, (3) chamber brushes, gun parts cleaning brush, (2) shop cloths, 4 oz. Break Free CLP, and 24 oz. TCE Cleaner/Degreaser, plus Upper Receiver Clean-ing Kit that includes handle, bronze brush, and cotton mop. For AR-15/M16 rifles and carbines chambered in .223/5.56mm only.

AR-15/M16

PROFESSIONAL CLEANING SYSTEM

Premium-Quality Components For Detail Cleaning Of The Entire Rifle

#080-000-573AV Brownells Professional AR-15 Cleaning System, 8K123C06 � � � � � $ 149.99

Improve range safety with bright yellow flag that clearly indicates a safe weapon to range safety officers. Withstands accidental bolt slamming. Curved probe stays in chamber with bolt open. abSPECS: Plastic, yellow. 51/2" (14cm) long. Pak of 3.

SINCLAIR

AR-15 CHAMBER SAFETY FLAG

Clearly Indicate Safe Weapon To Range Officers

#988-004-001AV AR-15 Chamber Safety Flag, 8H10C99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 13.49

A realistic, safe alternative to using real firearms for law enforce-ment training exercises and weapons retention drills. Molded from actual weapons for true-to-life detail. Strong, polyurethane plastic has steel reinforcement to prevent bending and flexing; handles and balances like an actual firearm. Safety blue color signifies this is a non-firing training aid. abSPECS: Polyurethane, safety blue. Approx. 5 lbs. 3 oz. (2.35kg) wt.

RING’S MANUFACTURING

AR-15 CARBINE SIMULATOR

#100-002-556AV Carbine Simulator, 3K185J32 � � � � � � $ 221.99

Safe, Non-Gun For Law Enforcement & Military

Training

Solid, inert, dummy rounds let you safely test the feed-ing, extraction, and magazine function of your rifle without the worry of accidental discharge. Lets you dry fire with-out risking damage to the firing pin. Glass-fiber reinforced polymer material can’t corrode or cause corrosion. Preci-sion molded to duplicate the Remington .223/5.56mm NA-TO round in five critical dimensions, and can be cycled and ejected the same as live ammunition. Sold in 5-Paks. abSPECS: Fiberglass-reinforced injection-molded polymer, black.

MAGPUL .223/5.56

DUMMY ROUNDSFor Testing & Dry-Firing An Unloaded Rifle

#100-004-885AV .223/5.56 Dummies, 5-Pak, 9Z3E57 � � � �$ 4.70

The spring-loaded “primers” in these snap caps act much like a live primer and cushion the blow so firing pin and bush-ing damage won’t occur. Bright color and “different” feel to prevent mixing with live rounds or function-testing dummies.

(Don’t use snap caps as dummies - they don’t duplicate loaded round weight/balance.) abSPECS: Brass base, plastic body.

ARMSPORT

DELUXE SNAP CAPSave Firing Pins - Shoot Better With

Safe, Dry-Fire Practice

STOCK # CALIBER/GA. CAPS PER PAK PRICE#055-811-223AV .223 Rem 2 6H10F99 $ 15.99#055-812-308AV .308 Win 2 6H10H99 $ 14.99

Precision machined aluminum gauge is the quick, accurate, easy way to check reloaded ammunition—or suspect factory ammo—to verify that it is dimensionally correct for proper function in your rifle. A majority of semi-auto jams are caused by oversized cases; if your ammo doesn’t fit the case gauge, it won’t fit your chamber. Anodized red or blue for easy caliber identification. Red .223/5.56 Wylde gauge fits .223 SAAMI and 5.56 NATO. Blue .308/7.62 gauge fits .308 SAAMI and 7.62mm NATO. abSPECS: Aluminum, anodized red (.223/5.56 Wylde) or blue (.308/7.62).


MATCH CASE GAUGEHelps Prevent Ammo-Related

Malfunctions

#452-000-102AV .223/5.56 Wylde Case Gauge, 2E00MXK � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 36.99

#452-000-103AV .308/7.62 Case Gauge, 2E00JZJ � � � � � � 36.99

Prevent chambering of a round & provide positive visual confirmation that the firearm is unloaded with a

bright orange chamber blocker in the ejection port. Instantly bring the weapon into operation by pulling the large, easy-to-grasp ring to clear the chamber. Stands up to years of insertion & removal cycles abSPECS: Molded polymer, orange. Fits AR-15/M16, M14/M1A, and other semi- and full-auto rifles and carbines with extractor enclosed within the bolt. Should not be used on any firearm with an extractor that extends forward from the bolt.

CHAMBERSAFE

CHAMBER BLOCKING DEVICEVisibly Confirms That Firearm Is

Unloaded

#100-003-782AV Chamber Blocking Device, 6B8K24 � � $ 10.69

All-steel M2A1 (.50-cal.) ammo can will hold hundreds of loose rounds and has many uses around the workshop or in the field. Brand-new manufactured to U.S. D.O.D. specs - not surplus or refurbished. Stackable, with a removable lid and a metal handle that folds down when not in use. Rubber gasket inside lid seals out dirt and moisture. abSPECS: Steel, Forest Green. Outside: 12" (30.5cm) long, 61/8" (15.5cm) wide, 7½" (19cm) high. Inside: 11" long, 5½" (14cm) wide, 6¾" high. 5 lb. 5 oz. (2.4kg) wt.

M2A1 AMMO CAN

#105-000-077AV M2A1 Ammo Can, 3Z20J99 � � � � � � � $ 21.99

Sturdy Storage For Ammo Or Other Gear

Brightly colored orange or yel-low plastic and a different “feel” makes sure you won’t confuse these for live rounds. Popular with many departments and agencies for use in Immediate Action train-ing for just that reason. These do not duplicate weight and balance of loaded rounds or function-testing dummies.SPECS: Orange or yellow plastic. Rifle and Handgun calibers supplied 50 or 10 rounds per bag, Shotgun calibers supplied 25 or 10 rounds per bag. 9mm Makarov: (9mm Mak).

PRECISION GUN SPECIALTIES

SAF-T-TRAINERS“Dummies” For Training Exercises Can’t Be Mistaken For Live Ammo

STOCK # CAL./GA. QTY. COLOR PRICE#729-050-223AV .223 Rem. 50 Orange 9B22K46 $ 25.99#729-000-045AV .223 Rem. 10 Orange 9B8J22 $ 9.99#729-050-308AV .308 Win. 50 Orange 9B24L19 $ 34.99#729-000-034AV .308 Win. 10 Orange 9B8B08 $ 9.99#729-051-009AV 9mm 50 Yellow 9B26C08 $ 30.99#729-050-009AV 9mm 50 Orange 9B16E73 $ 18.99#729-000-038AV 9mm 10 Orange 9B9N71 $ 12.99

RA

NG

E &

TR

AIN

ING

GE

AR

CLE

AN

ING

SUP

PLIE

S

AR

-15

/M16


SINCE 1939

Brownells has teamed up with M-Pro 7 to develop this clean-ing kit specifically for maintaining an AR-type rifle in peak operating condition. Inside the kit’s compact hardshell case you’ll find M-Pro 7 Gun Cleaner that safely pen-etrates deep beneath even tough, scorched-on carbon fouling to lift away the gunk and leave the bore sparkling clean. M-Pro 7 Gun Oil

LPX delivers superior lubrication and corrosion protection, and can even be used for quick cleaning in the field. You get a military-style multi-section steel cleaning rod, plus high-quality bronze bore brushes for ARs chambered in .223/5.56mm, .308/7.62mm, 9mm, and .45. There’s a brush for cleaning the bolt carrier way—critical for maintaining reliable weapon cycling—plenty of absorbent cotton flannel patches, and the M-Pro 7 Weapons Maintenance Guide. Due to its non-hazardous and non-flammable contents, this kit meets TSA regulations for legal transport in checked baggage aboard commercial airliners. abSPECS: Kit contains polycarbonate box, black; 2 fl. oz (59ml) M-Pro 7 Gun Cleaner; 2 fl oz. Gun Oil LPX; five-section steel cleaning rod w/30" maxi-mum extended length; (4) bronze bore brushes to fit .22/.223/5.56mm, .308/7.62mm, 9mm, and .45; bronze bolt way cleaning brush; polymer patch loop; 1" circular, 2" square, and 21/2" square cotton flannel patches; lint-free gun cloth; and Weapons Maintenance Guide.

/M-PRO 7®

AR-15/M16/AR-308 CLEANING KITComplete System Ensures

Thorough Cleaning To Keep Your AR Functioning Reliably

#080-000-686AV AR-15 Cleaning Kit, 9K31N80 � � � � � $ 34.99

Our crew of tactical weapons experts developed these fine 5.56mm cleaning kits to give the M16/AR-15 shooter a handy, car-ry-along system that fits snug in the storage compartment of A1/A2 buttstocks. Standard Kit includes a government-type 5-piece cleaning rod (with loop), bronze bore brush, bronze chamber brush, double-ended parts cleaning brush, and a heavy Nylon pouch ta-pered correctly for a rattle-free fit. Deluxe Kit adds a solvent-resis-tant nylon chamber brush, 25-Pak of mil-spec cleaning patches, and 4ml of Brownells Friction Defense™ Xtreme Gun Oil for superior weapons lubrication and corrosion protection. Detailed instruc-tions in both kits guide you through the cleaning process. abSPECS: For 5.56mm (.223) caliber only. Fits A-1 and A-2 style buttstocks. Both kits include 5-piece cleaning rod, bore brush, bronze chamber brush, parts cleaning brush, buttstock pouch, and instructions. Deluxe Kit adds nylon chamber brush, 25-Pak cleaning patches, and 4ml of Fric-tion Defense Xtreme Gun Oil.

AR-15/M16

BUTTSTOCK CLEANING KIT

Compact, Field-Ready Kits That Go Wherever Your Rifle Goes

#084-000-229AV Standard Buttstock Cleaning Kit, 4H16K56 � � � � � � � � � � � � � � � � � � � � � � � � �$ 16.99

#084-000-233AV Deluxe Buttstock Cleaning Kit, 4H20E21 � � � � � � � � � � � � � � � � � � � � � � � � � 21.99

Handy, all-in-one kit contains tools custom-designed to clean an AR from chamber to muzzle. Dense, durable Nyflex™ fiber brushes offer maximum bristle area per square inch to thoroughly clean specific parts of the weapon with-out risk of scratching bore or the alu-minum components. Includes brushes for .223/5.56mm bore, upper receiver, chamber, bolt carrier, and carrier key, plus a dedicated gas tube brush. Clean-ing rope accepts the bore brush or the included patch loop. Aluminum tool provides plenty of cleaning torque as the

handle for the receiver and carrier brushes, and may be used as a handle for the cleaning rope. Great for use with Iosso Bore Cleaner and Eliminator TripleAction Gun Oil, both available separately. abSPECS: Aluminum rod. Brushes - Nyflex nylon fiber. Gas tube brush is per-manently attached to a steel cable; others also fit standard 8-32 female threaded cleaning rods. Cleaning Kit contains 5 brush¬es, patch puller, cleaning rope, cleaning tool with handle, patch loop, gas tube brush, and carry pouch. Brush Pak contains bore brush, upper receiver brush, chamber brush, and bolt carrier brush

IOSSO® AR-15/M16 ELIMINATOR™ AR-15 CLEANING KIT

Cleans Bore & Hard To Reach Areas, Including Gas Tube

#073-000-007AV AR-15 Cleaning Kit, 3G39N84 � � � � � � � $ 54.99#073-000-005AV AR-15 Brush Pak, 3G11N05 � � � � � � � � � 14.99

Handy kit contains ev-erything you need to clean your AR-style .308 at the bench, on the range or in the field. Features blue Ny-flex™ nylon brushes that are both tough and flexible to thoroughly clean the bolt carrier, bolt carrier key, upper receiver, chamber, and bore. Gas tube brush with guide tool lets you clean the gas tube without disassembling the rifle. Bore cleaning rope and patch puller help you remove carbon deposits with simple pull-through action. Extension rod can be used as a handle for the brushes or the bore cleaning rope; extends the rope’s reach for extra-long barrels. abSPECS: Extension rod, aluminum, blue. 8" (20cm) long. Guide tool, alumi-num, blue. 4" (10cm) long. Brushes - Nyflex nylon fiber, brass core, 8-32 male threads. Includes brushes for cleaning: upper receiver, chamber, bolt carrier, .30 caliber bore, and bolt carrier key. Gas tube brush perma-nently attached to steel cable, 24" (61cm) long. Kit also includes patch puller, cleaning rope, and carry pouch.

IOSSO® AR-STYLE .308

COMPLETE CLEANING KIT

#073-000-009AV Complete AR-308 Cleaning Kit, 3G39D84 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 54.99

#073-000-027AV Replacement Gas Tube Brushes, 2-Pak, 3G6B06 � � � � � � � � � � � � � � � � � � � � 7.99

Helps Clean AR-Style .308 Gas Tube Without

Disassembly

Make short work of cleaning heavily fouled AR-15 upper receiv-ers, right down to the locking lug recess. Specially sized and shaped bronze receiver brush and cotton mop quickly remove stubborn carbon residue that can hinder your rifle’s reliability. Standard Kit is for cleaning upper receiver and bolt carrier way. Deluxe Kit has a longer rod and a chamber brush that lets you thoroughly clean the bolt carrier way, the chamber, and the locking lug recess. This kit also available with a tough-scrubbing wool mop. abSPECS: Standard Kit includes bronze receiver brush, mop, and brass cleaning rod with plastic handle. Overall length – 61/2" (16.5cm) long, threaded 5/16"-27 tpi. Deluxe Kit includes bronze receiver brush, mop, AR-15 chamber brush, thread adapter and brass cleaning rod with plastic handle. Overall length – 141/4" (36.2cm) long, threaded 8-32 tpi. Replace-ment brush and mop are threaded 5/16"-27 tpi.

AR-15/M16

UPPER RECEIVER CLEANING KIT

The Right Tools For A Difficult Cleaning Job

Deluxe Kit, Wool

#084-000-028AV Standard Kit, Cotton Mop, 4H26L96 � � � � � � � � � � � � � � � � � � � � � � � � �$ 32.99

#084-000-029AV Deluxe Kit, Cotton Mop, 4H19H68� � 26.99#084-823-115AV Deluxe Kit, Wool Mop, 4H19M99 � � � 28.99#084-223-003AV Replcmt Receivr Brush, 4H4I19 � � � � 4.99#084-223-004AV Replacement Wool Mop, 4H9P23 � � 11.99#084-000-027AV Replacement Cotton Mop, 4H5P98 7.99

The perfect kit for fast, thorough cleaning of the chamber and hard-to-reach lug recesses in the barrel extension of AR-15 and AR-style .308 rifles. Each kit contains a detachable handle, a flexible steel braid, rubber coated cleaning rod, and a heavy duty bronze bore brush with a wider-diameter section of stainless steel bristles to scrub the lug recesses. Compact enough to fit comfortably in a pocket or range bag and ideal for quick cleaning jobs at the range or for thorough cleanings at home. abSPECS: Flexible, rubber-coated, braided steel 10" (25.4cm) rod, plastic handle, bronze/stainless steel brush. Models for AR-15 and AR-style .308 rifles. Accepts brushes with 8-32 thread.

CHAMBER MAID SWAB KITS - Replaces the steel bristles on the standard .223 and .308 Chamber Maid kits with a su-per-absorbent, star-shaped felt swab precisely contoured for thorough yet gentle cleaning of the lug recesses on AR-15 and AR-style .308 rifles. Each kit contains five swabs, bronze bore brush, removable handle, and a flexible steel braid, rubber coated cleaning rod.SPECS: Kits available for AR-15 .223 and AR-type .308 rifles. Each kit con-tains five swabs, bronze bore brush, removable handle, and a flexible steel braid, rubber coated cleaning rod, 10" (25.4cm) long. Felt swabs - .308 - replacement pak of 12. .223 – replacement pak of 20. Accepts brushes with 8-32 thread.#100-002-569AV AR-Style .308 Swab Kit, 5K15A46 � � $ 22.99

C.J. WEAPONS AR-15/AR-STYLE .308

CHAMBER MAID KITSScrubs Chamber & Lug Recesses Extra

Clean—Fast

#100-003-014AV AR-15 .223 Chamber Maid Kit, 5K11D91 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 12.99

#100-003-015AV AR-Style .308 Chamber Maid Kit, 5K14B36 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 16.99

ab

#100-002-570AV AR-Style .308 Replcmnt. Swabs, 12-pak, 5K8M92 � � � � � � � � � � � � � � � � � � � � � � �$ 12.99

#100-002-571AV AR-15 .223 Swab Kit, 5K12J23 � � � � � � � � 18.99#100-002-057AV AR-15 .223 Replcmnt. Swabs, 20-pak,

5K12C61 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 14.99

Versatile, go-anywhere cleaning kit is the all-in-one cleaning solution for your AR-pattern. Use it at the range or in the field without disassembly for quick touch-ups or at home for a thorough breech-to-muzzle cleaning. MSR/AR kit features Otis’s B.O.N.E. (Bolt Operational Necessary Equipment) Tool® for servic-ing the bolt, 8" and 30" Memory-Flex® cleaning cables, two Mongoose® brush/swab combos, a chamber brush, slotted tip, and a 1/2 oz. tube of O85 Ultra Bore® solvent. Also has an assortment of brushes, scrapers, cleaning patches, picks, and other tools to help you keep your AR clean. Comes in a durable, belt-attachable nylon carry case. MSPR kit contains many of the same components, plus items specifically designed for cleaning AR-pattern rifles with gas piston operating systems. ab

OTIS AR-15/M16

MSR/AR & MSPR CLEANING SYSTEMSQuick & Effective Breech-To-

Muzzle® Cleaning For Your AR

#668-000-109AV .223/5.56 MSR/AR Cleaning System, 8F50H02 � � � � � � � � � � � � � � � � � � � � � � � � $ 58.99

#668-000-137AV .308/7.62 MSR/AR Cleaning System, 8F48K53 � � � � � � � � � � � � � � � � � � � � � � � � 53.99

#668-000-135AV .223/5.56 MSPR Cleaning System, 8F38N37 � � � � � � � � � � � � � � � � � � � � � � � � 48.99

New production of the original, military issue “Cleaning Rod, Small Arms” (NSN #1005-00-089-3994). Designed for the M16/AR-15’s and perfect for range kit or hunting pak. Fold-over handle. abSPECS: 8-36 military thread. .204" (5.2mm) dia. rod. 4 sections, each 73/8" (18.7cm). Overall length, with Jag, 293/4" (75.6cm). All parts steel. O.D. parkerized finish. Includes 8-36 to 8-32 adapter.

CLEANING ROD, SMALL ARMS

Original Military M16 Rod

#084-116-100AV Cleaning Rod, Small Arms, 4H14D46 � � � � � � � � � � � � � � � � � � � � � � � � �$ 16.99

#084-116-362AV 8-32F/8-36M Adapters, 4H4A93 � � � 6.99

Genuine clean-ing components make a great take-along kit for range and field use. Kit includes sectional cleaning rod with combo handle,

patch loop, bore brush, chamber brush, double-ended parts brush, oiler bottle, and storage pouch. Fits snuggly inside the trap-door compartment on A2 buttstocks. abSPECS: Rod/Handle - Steel, parkerized. Bore Brush - Bronze. Chamber Brush - Bronze w/stainless steel lug recess bristles. Oil Bottle - Plastic. Parts Brush - Nylon bristles, plastic handle. Fits .223 caliber.

MASEN

MIL-SPEC CLEANING KITAuthentic, Issue Kits For Field Use

#555-000-005AV M16 Cleaning Kit, 6E16A14 � � � � � � � $ 18.99

CLE

AN

ING

SU

PP

LIE

S

AR

-15/M

16


brownells.com

Adapts the small arms military cleaning rods to accept 8-32 commercial brushes and jags. abSPECS: Steel, parkerized finish. 31/4" (8.26cm) long. Pak of 2.

MILITARY CLEANING ROD ADAPTERFor 8-32 Attachments

#084-116-362AV 8-32F/8-36M Adapters, 4H4A93 � � � � � �$ 6.99

Soft, brass loop threaded for 8-36 tpi Military-type cleaning rods helps prevent loss of accuracy due to bore wear caused by cleaning. Securely holds cleaning patch for .22-.30 calibers without damage to rifling. abSPECS: Brass. .22-.30 Cal., 8-36 tpi male threads.

MILITARY THREAD BRASS LOOPNo Bore Damage; Fits

Military Rods

#084-000-259AV .22-.30 Cal., 8-36 Brass Loop, 8A3C38 � � $ 4.99

100% cotton, single-nap, un-bleached flannel patches made to get guns clean efficiently. The coarse, open weave side grabs and holds bore

fouling and doubles as a “scrubber” for tough surface dirt. Soft, napped side holds solvents and oils. abSPECS: 100% cotton flannel. 1000 patches per package. .223 - 11/4" (3.2cm) square. .30 - 21/2" (6.4cm) square.

MIL-SPEC GUN CLEANING PATCHESFrom The Same Supplier

Uncle Sam Uses

#546-100-223AV .223 Mil Spec Cleaning Patches, 1,000-Pak, 6D15N38 � � � � � � � � � � � � � � � �$ 18.99

#546-100-030AV .30 Mil Spec Cleaning Patches, 1,000-Pak, 6D30E15 � � � � � � � � � � � � � � � � � 35.99

Cleans mili-tary issue M203

(40mm) grenade launcher and 37mm variants. Two-piece, alumi-num cleaning rod with 5/16"-27 female threads can also be used for short-barreled shotguns. abSPECS: Kit includes: (1) 14" (36cm) aluminum rod w/fixed handle, (1) 8" (20cm) aluminum rod extension, (1) 5/16"-27 phosphor bronze brush, and (1) 5/16"-27 cotton mop.

DEWEY

GRENADE LAUNCHER CLEANING KITThe Right Kit For The M203

#234-000-051AV Complete Cleaning Kit, 4C36D69 � � � $ 48.99#234-000-058AV 37/40mm Replace Brush, 4C5M86 � � � 10.99#234-000-059AV 37/40mm Replace Mop , 4C6Q15 � � � 9.99

Dewey’s CHR brass chamber rod combined with a bronze/steel bristle brush cleans the chamber and critical locking lug area. abSPECS: Brass rod, plastic handle. 8-32 tpi. 121/4" (31.1cm) long.

DEWEY BRASS CHAMBER ROD

The Right Length For Upper Receiver Cleaning

#234-000-021AV AR-15 Combo, 4C10N77 � � � � � � � � � � $ 15.49#234-000-041AV AR-Style .308 Combo, 4C11K54 � � � 15.79

Allows cleaning from the breech to protect the muzzle from cleaning rod damage. Rubber “O” ring seals the chamber and keeps solvent out of the lower receiver. abSPECS: Aluminum, anodized. Delrin handle. Rubber O-rings. Approxi-mately 9" (22.9cm) long. Includes spare O-rings and O-ring installation tool. Models available for AR-type rifles chambered in .223/5.56, 6.8mm, .300 AAC Blackout, and .308/7.62.

DEWEY AR-15/M16/AR-STYLE .308

CLEANING ROD GUIDE

Keeps Solvent Out Of The Action

#234-015-000AV .223/5.56 AR Rod Guide, 4C16L38 � �$ 21.99#234-000-075AV 6.8mm AR Rod Guide, 4C23L77 � � � � 31.99#234-011-000AV .300 AAC AR Rod Guide, 4C23N27 � � 27.99#234-010-000AV .308/7.62 AR Rod Guide, 4C18E61 � � 24.99

Machined Delrin® bore guide replaces the bolt carrier while in-tegral “locking lugs” keep guide firmly in the receiver. Lets you keep both hands free for better cleaning rod control. Helps keep solvents and other debris out of lower receiver during cleaning.SPECS: Machined Delrin body. 91/2" (24.1cm) long.

C.J. WEAPONS AR-15 BORE STAY™Convenient, Lock-In-

Place Bore Guide

#100-000-432AV Bore Stay Bore Guide, 5K20K54 � � � � $ 32.99

Replaces the bolt carrier, seals the upper receiver with rubber O-rings to keep solvents and crud out of the action. Solid aluminum rod guide helps prevent throat and chamber damage caused by cleaning rod contact. abSPECS: Machined aluminum, AR-15 - red, anodized finish. 10" (25cm) long. Fits .223 only. AR-Style .308 - blue, anodized finish. 11.5" (29.2cm) long. Fits .308 only.


CLEANING ROD GUIDE

Helps Prevent Crown, Throat & Chamber Damage

#452-015-220AV AR-15 Rod Guide, 2E31M72 � � � � � � � � � �$ 34.99#452-015-221AV AR-Style .308 Rod Guide, 2E34J48 � � � 37.99

Centers the cleaning rod in the bore to prevent rifling dam-age. Extra long for scoped rifles. O-ring seals chamber and keeps solvents out of the action and trigger, holds bore guide firmly in place. abSPECS: Delrin®. Silicone rubber O-ring. 91/2" (24cm) long.

POSSUM HOLLOW AR-15/M16

O-RING BORE GUIDEProtects Chamber

& Bore

#528-101-019AV O-Ring Bore Guide, for AR-15/M16, 8B13D54 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 21.99

Clean your AR-15 from the breech to prevent muzzle or cham-ber damage. Insert into the upper receiver, replacing the bolt carrier, for safe and easy cleaning. Self-centers in the receiver with O-ring seals. Solvent port keeps chemicals out of the action. abSPECS: Machined Delrin®. 91/2" (24cm) long. Models for AR-15s cham-bered in .223/5.56mm NATO, 6.5mm Grendel, .300 AAC Blackout, or .50 Beowulf.

SATERN® AR-15 BORE GUIDE

Prevents Damage To Chamber & Bore

#812-015-002AV .223/5.56 Bore Guide, 2A33K85 � � � � � $ 52.99#812-000-007AV 6.5 Grendel Bore Guide, 2A33Q85 � � � 52.99#812-000-015AV .300 AAC Blackout Bore Guide,

2A38G46 � � � � � � � � � � � � � � � � � � � � � � � � � � 52.99#812-000-016AV .50 Beowulf Bore Guide, 2A33N85 � � � 52.99

Handy tool secures the upper and lower receivers of an AR-15 in an open position to give easy access for cleaning and maintenance. The upper link engages the upper re-ceiver with an integral pin, and has a

threaded lower portion that fits the lower takedown hole and pin. Two lower links give from 1.2" to 1.8" of opening to allow easy insertion of bore guide or give access to interior parts. SPECS: Steel, matte black finish

Holds AR-15 Open For Cleaning & Maintenance

#100-012-249AV Adjustable Receiver Link, 7A8B90 � �$ 12.09

WHEELER ENGINEERING AR-15/M16

ADJUSTABLE RECEIVER LINK

The one-pass Ripcord cleans barrels hot off the firing line for quick and easy field main-tenance. Tightly woven DuPont™ Nomex® fibers withstand temperatures up to 700° F, while they act as both a brush and patch to loosen then trap fouling. The aggressive clean-ing surface is 10" long and has a helix shape that digs deep into the rifling. Molded rubberized core/cable combination that keeps the Nomex pressed against the bore for an all-around thorough clean-ing. Simply insert the Ripcord into the chamber and pull through the muzzle. Unlike gravity-fed bore snakes, the stiffer Ripcord works at any angle and also can safely dislodge jammed cases and other blockages. Brass ends won't scratch the bore and are threaded to accept standard 8-32 accessories. ab

OTIS RIPCORD®

Fast, Easy “One & Done” Bore Cleaning Hot Off The Firing Line

#668-000-130AV .223/5.56 Ripcord, 8F10J28 � � � � � � � $ 14.99#668-000-138AV .243/6.5mm Ripcord, 8F11I85 � � � � � 13.49#668-000-139AV .270/6.8mm Ripcord, 8F10K28 � � � � 13.49#668-000-131AV .30/7.62 Ripcord, 8F10G28 � � � � � � � 14.99#668-000-132AV 9mm/.357/.38 Ripcord, 8F10L28 � � 14.99#668-000-134AV .40/10mm Ripcord, 8F10B28� � � � � � 13.49#668-000-133AV .44/.45 Ripcord, 8F10D28 � � � � � � � � 14.99#668-000-140AV 12 Ga. Shotgun Ripcord, 8F10Q28 � � 17.19

Lets you easily clean and lube the action or swab out barrel, from the breech. Hold-open link separates upper and lower receiver assemblies, locks them solid, prevents the receiver from constantly flopping closed. Stainless steel and Delrin® link installs in sec-onds, is impervious to solvents. Handy Kit includes the link plus a Sinclair cleaning rod guide custom-designed for the AR-15 that enables bore cleaning from the breech without risk of solvent dripping into the action. abSPECS: Delrin and stainless steel.

SINCLAIR AR-15/M16/AR-STYLE .308

CLEANING LINKLocks AR Receivers Open For Fast, Easy Cleaning

#749-002-497AV AR-15 Cleaning Link, 8H13M59� � � � � � �$ 15.99#749-002-620AV AR-308 Cleaning Link, 8H18P00 � � � � � 22.99#749-011-465AV AR-15 Link + Rod Guide Kit,

8H24M87 � � � � � � � � � � � � � � � � � � � � � � � � � � � 32.99

Everything you need to clean your AR in one compact kit. All kits include Memory-Flex® cable rod, O85® Ultra Bore™ solvent, slotted tip, patches, bore brushes and other accessories. Carries on your belt. #223 kit for .223/5.56mm AR-15/M16/M4 rifles. #308 kit is for .30/7.62 caliber rifles. 300 BLK kit is specifically for rifles chambered in .300 AAC Blackout (300 BLK). abSPECS: Black nylon carrying case, brass brushes, tips and handles. Cleaning solvent and patches. Plastic coated steel cable rods. #223 case is 41/2" (10.8cm) dia. #308 & 300 BLK cases are 31/2" (8.9cm) dia.

AR-15 GRIP KIT - Provides a very useful, field and emergency cleaning kit that’s always ready for use. All components are contained in a secure, grip insert that stores in the standard A2 pistol grip recess. SPECS: Polymer insert, black. Contains: cleaning patches, 26" (66cm) flexible rod, bore brush, slotted, brass tip, NATO thread adapter and T-handle.#668-000-005AV AR-15 Grip Kit, 8F40N79� � � � � � � � � � � � $ 43.99

CLEANING PATCHES - The same patches for .22-.30 caliber rifles included in the tactical rifle cleaning system. Pre-slotted to fit loop-style rod tip. Each patch can be varied in size by pinching at the various slots. SPECS: 100% virgin cotton. 2" (5cm) diameter.#668-000-002AV Small Caliber Patches, 100-Pk, 8F5N71 � � $ 5.99

OTIS AR-15/M16/AR-STYLE .308

TACTICAL RIFLE CLEANING SYSTEMSelf-Contained Pocket Cleaning Kit

#668-000-052AV #223 Cleaning System, 8F30K65 � � �$ 39.99#668-000-055AV #308 Cleaning System, 8F32A04 � � � 35.99#100-012-173AV 300 BLK Cleaning Kit, 8F41K36 � � � � � 44.99

ab

ab

Compact, rod-type cleaning kit contains every-

thing you need to protect the accuracy and reliability of your AR15. Kit includes combination

bore illuminator/safe chamber indicator that also pushes out takedown pins, alumi-

num rod sections, brushes, slotted tip, picks, and patches packed into a rugged, weatherproof, zippered case with a digital camouflage exterior. Internal tray holds cleaning tools securely, so there’s no rattling. SPECS: EVA-molded case, digital camouflage exterior. 2" high, 3 ½" across, 6" long. Contains: 6 threaded anodized aluminum rod sections, T-handle, 5.56/.223 brass brush, brass chamber brush, nylon bolt carrier brush, nylon slotted tip, 25 synthetic cleaning patches, 1 straight pick, 1 angled pick, combination bore light/pin punch/safety flag.

REAL AVID

GUN BOSS AR15/M16 CLEANING KITCleaning Kit Made To

Go Wherever Your AR15 Goes

#100-012-144AV Gun Boss Ar15 Cleaning Kit, 8C25Q84 � �$ 28.99

CLE

AN

ING

SUP

PLIE

S

AR

-15

/M16


SINCE 1939

Super-absorbent felt swabs fit over the tip of any .223 or .308 bore brush and fit perfectly in the lug recess and barrel extension to get those areas completely clean. Use with your favorite bore cleaner to remove crud and deposits that other cleaning methods leave behind. Perfect for quick cleaning jobs on the range or thorough cleanings at home. abSPECS: Felt, white. Sold in 20-Paks for .223 or 12-Paks for .308.#100-002-057AV AR-15 .223 Replcmnt. Swabs, 20-pak,

5K12C61 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 14.99#100-002-570AV AR-Style .308 Replcmnt. Swabs,

12-pak, 5K8M92 � � � � � � � � � � � � � � � � � � � � 12.99

C.J. WEAPONS AR-15/AR-STYLE .308

BARREL EXTENSION & LUG RECESS SWABS

Get Those Hard-To-Reach Areas Really-Clean

Handy, two-in-one tool quickly and easily removes carbon foul-ing from critical areas of the bolt and carrier to ensure proper bolt function and reliable cycling. Scrape carbon from the carrier with the reamer end of the tool, then clean the bolt tail with the other end. The unique, lathe-like design adjusts to fit any bolt tail radius, ensuring a universal-fit tool for any AR bolt. Made from hardened carbon steel, zinc plated for corrosion resistance. An ideal tool for the range bag, field armorer’s kit, or “necessaries” bag. abSPECS: Hardened carbon steel, zinc plated. CRT-15 - 51/2" (14cm) long, 1/2" (1.3cm) wide, 11/8" (2.8cm) high. Fits .223/5.56mm AR-15/M16/M4 bolt and bolt carrier. CRT-25 - 51/2" long, 1" (2.5cm) wide, 1" high. Fits any AR-style rifle chambered in .308/7.62, including ArmaLite® AR-10®, M110 Sniper Rifle, Knight’s Armament SR-25, DPMS LR-308, and Remington R-25.

MAGNA-MATIC AR-15/M16/AR-STYLE .308

CARBON REMOVAL TOOLQuickly Removes

Carbon Fouling From Bolt & Carrier

#100-004-436AV CRT-15 Carbon Removal Tool, 4D29H90 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 39.99

#100-005-932AV CRT-25 Carbon Removal Tool, 4D34L15 � � � � � � � � � � � � � � � � � � � � � � � � � � 49.99

"Bolt Operational Necessary Equip-ment" tool removes carbon fouling from the bolt, bolt carrier, and firing pin of any AR-15. To clean the bolt, simply insert it into the end of the tool and rotate. Clear fouling from inside the carrier by sliding the long end of the tool into the carrier and giving it a few turns. Remove carbon from the back of the firing pin by using the scraper hole on the side of the tool. An 8-32 threaded hole allows the B.O.N.E. to serve as a T-handle for conventional cleaning rods, too. abSPECS: CNC-machined 1144 steel, Parkerized finish. 2.7” (6.8cm) OAL. Models for .223/5.56 or .308/7.62mm AR-style rifles.

#668-000-129AV B.O.N.E. Tool, .223/5.56, 8F19Q71 � � � � $ 24.99#668-000-762AV B.O.N.E. Tool, .308/7.62, 8F19J31 � � � � 28.99

OTIS B.O.N.E. TOOLKeeps Your AR-15 Clean & Functioning Properly

Breaks loose and removes hard-to-get-at carbon buildup with-out damaging the bolt carrier. Quickly solves function-related cycling problems caused by excessive carbon deposits inside the bolt recess. Hardened steel scraper tip will last indefinitely with proper use. abSPECS: Steel reamer, plastic handle. 61/2" (16cm) long.

MARK BROWN AR-15/M16/AR-STYLE .308

CARRIER CARBON SCRAPERSolves Cycling Problems

Caused By Carbon Buildup In Bolt Recess

#133-100-016AV AR-15/M16 Carrier Carbon Scraper, 3C24D20 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99

#133-000-001AV AR-308 Carrier Carbon Scraper, 3C25P28 � � � � � � � � � � � � � � � � � � � � � � � � � � 38.99

Original military design, M16, with 8-36 thread for direct thread-ing into the “Cleaning Rod, Small Arms,” or AR-15 with 8-32 thread to fit standard rods. AR-Style .308 cleans the larger .308 chamber used on these rifles. Bronze bristles fit chamber, longer, stainless steel tufts clean locking lug recesses. abSPECS: M16 - NSN 1005-00-999-1435, has 8-36 military thread. Meets Mil Spec: MIL-B-20100C. AR-15 and AR-Style .308 have 8-32 standard thread. M16 and AR-15 are 37/8" (9.8cm) overall. AR-Style .308, 43/8" (11.2cm).

M16/AR-15/

AR-STYLE .308 CHAMBER BRUSHOriginal M16 Style Chamber Brushes

#084-116-016AV M16 Chamber Brush, 8-36 Thread, 4H4L04 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 4.99

#084-116-015AV AR-15 Chamber Brush, 8-32 Thread, 4H4E17 � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.99

#084-116-025AV AR-Style .308 Chamber Brush, 8-32 Thread, 4H4Q74 � � � � � � � � � � � � � � � � � � 5.99

Durable, tough, nylon bristles aggressively scrub your chamber; nylon tufts reach and clean the locking lug recess. Available for M16, AR-15, and AR-Style .308 rifles. M16 has an 8-36 thread to directly thread into the military’s “Cleaning Rod, Small Arms”. abSPECS: Nylon brush, brass stem. M16 - 37/8" (9.8cm) overall. 8-36 military thread. AR-15 - 37/8" (9.8cm) overall. 8-32 standard thread. AR-Style .308 - 43/8" (11.2cm). 8-32 standard thread.


NYLON CHAMBER BRUSHLong-Wearing Bristles Won’t Break Down In

Solvents

#084-117-002AV M16 Heavy Weight Nylon Chamber Brush, 4H4N91 � � � � � � � � � � � � � � � � � � � � � �$ 5.99

#084-117-001AV AR-15 Heavy Weight Nylon Chamber Brush, 4H5G59 � � � � � � � � � � � � � � � � � � � � � � 6.99

#084-117-003AV AR-Style .308 Heavy Weight Nylon Chamber Brush, 4H6L75 � � � � � � � � � � � � � 8.99

Unique, dual-purpose design cleans and lubricates both the chamber and locking lug recesses of your M16, AR-15 or AR-Style .308 with one mop. Long, skinny portion reaches the chamber with individually-tied strands that do the work of a thousand tiny fin-gers. Short, large-diameter section cleans and lubricates locking lug recesses. abSPECS: Cotton or wool. 8-32 threads. Approximately 3" (7.6mm) longs.

M16/AR-15/AR-STYLE .308

CHAMBER MOP

#084-424-003AV AR-15/M16 .223 Cotton Chamber Mop, 3-Pak, 4H6H09 � � � � � � � � � � � � � � � � � � � � � $ 7.99

#084-424-004AV AR-15/M16 .223 Cotton Chamber Mop, Dozen, 4H23D47 � � � � � � � � � � � � � � � � � � � 26.99

#084-426-003AV AR-Style .308 Cotton Chamber Mop, 3-Pak, 4H6N33 � � � � � � � � � � � � � � � � � � � � � 8.99

#084-426-004AV AR-Style .308 Cotton Chamber Mop, Dozen, 4H22B61 � � � � � � � � � � � � � � � � � � � � 29.99

#084-426-001AV AR-15/M16 Wool Chamber Mop, 3-Pak, 4H5H82 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 8.99

#084-426-002AV AR-15/M16 Wool Chamber Mop, Dozen, 4H22C32 � � � � � � � � � � � � � � � � � � � 30.99

#084-426-005AV AR-Style .308 Wool Chamber Mop, 3-Pak, 4H7G62 � � � � � � � � � � � � � � � � � � � � � 9.99

#084-426-006AV AR-Style .308 Wool Chamber Mop, Dozen, 4H27E41 � � � � � � � � � � � � � � � � � � � � 35.99

Popular Military-Style Brush Distributes Lubricants & Rids Fouling

Developed for the U.S. Armed Forces to clean M16/M4 rifles quickly and effectively and get them back into action. Double-ended, solvent-proof, polypropylene handle provides a large, con-toured series of nylon bristles to cover curves and open areas, while the short, extra-stiff, narrow line of bristles tackles the really tough crud in those hard to reach areas. Provides superior scrubbing ac-tion for individual parts Enough bristle backbone to remove greasy gun dirt, yet won’t scratch metal finishes. An exceptionally good, practical, cleaning brush for use at the bench or in the field. abSPECS: Handle - Solvent-resistant polypropylene, O.D. green. Bristles - Nylon. 7" (17.8cm) long. Meets Mil Spec 129J, NSN# 1005-00-494-6602.#676-450-001AV Gun/Parts Brush, each, 8K3N01 � � � � � � �$ 3.99#676-450-006AV Gun/Parts Brush, 10-pak, 8K18E45 � � � � 23.99

Military-Approved, Double-Ended Cleaning Power For Guns & Parts

GUN/PARTS CLEANING BRUSH

Extra long to let you scrub the full length of the gas tube. Highly-absorbent cotton carries solvent in and crud out. Regular use keeps gas tube free of fouling and carbon buildup for reliable function. abSPECS: Cotton, wire core. 16" (40.6cm) long, 1/8" (3.2mm) dia. Package contains 50 cleaners.

C.J. WEAPONS AR-15 GAS TUBE CLEANERSExtra Length Reaches

Entire Tube

#100-000-433AV AR-15 Gas Tube Cleaners, 5K11C48 � � �$ 13.99

Heavy-duty, flexible pad cushions your gun and protects your work bench or table top during cleaning, repair or maintenance while simultaneously serving as an easy reference for disassembly and assembly. Schematics are printed right onto the pad, along with additional information about the AR-15. Large enough accomdate long-barreled guns, pads have soft polyester top to prevent scratch-es to the gun’s finish and no-slip neoprene rubber backng keeps mat in place. Helps prevent solvents and oils from penetrating to your work area. Cleans up easiy with warm water and mild detergent. SPECS: Neoprene rubber, polyester top. 36" (91.4cm) long, 113/4" (29.8cm) wide, 1/8" (3mm) thick. Black, OD Green or Gray.

TEKMAT AR-15/M16

AR-15 GUN MAT

Protective Work Mat Has Schematic For Instant Reference

#100-015-989AV Black AR-15 Gun Mat, 2D26M86 � � � � $ 32.99#100-015-990AV OD Green AR-15 Mat, 2D16A50 � � � � � 22.99#100-015-991AV Gray AR-15 Mat, 2D16L50 � � � � � � � � � � 24.99

Padded neoprene mat with rubber backing protects gun’s finish during cleaning. Big enough to accommodate a full-size AR-15/M16 rifle. Features a big exploded drawing of an AR-15 organized by major groups - even a schematic of a disassembled 30-round magazine. Absorbs excessive oils and solvents and keeps your work surface dry and clean. Rolls up easily for storage. SPECS: Rubber-backed neoprene, gray. 47" (119cm) long x 20" (50cm) wide.

Protects Your AR & Has Handy Reference Schematic

#100-012-247AV AR Maintenance Mat, 7A19M62 � � � $ 23.99

WHEELER ENGINEERING

AR MAINTENANCE MAT

Easy to use hand-held tool is for serious AR-15 shoot-

ers who want to quickly eradicate the carbon buildup on the bolt tail that’s difficult to remove with conventional cleaning methods. Helps ensure efficient gas system function and reliable cycling. This hard-working, stand-alone tool does the whole job – no need for brushes, solvents, or breakdown sprays. Just remove the bolt from your rifle and insert the bolt tail into scraper, then turn the scraper clockwise to remove the carbon. The comfortable, contoured handle provides excellent leverage. A few gentle turns should be all that’s needed for the bolt tail to be clean and ready for action. abSPECS: Hardened tool steel, plastic handle. Approximately 51/2" (14cm) long.

AR-15/M16

BOLT RADIUS SCRAPEREasily Removes Carbon

Deposits From Bolt Tail With A Few Gentle Turns

#080-000-639AV Bolt Radius Scraper, 8K16N05 � � � � � � � �$ 19.99

Easy-to-use cleaning tool helps remove accumulated powder residue, grease, and carbon from AR-15 lug recesses. Helps ensure secure bolt lockup, reliable cycling, and consistent accuracy. Simply remove the bolt, bolt carrier, and charging handle, and insert the tool with the disposable cotton cleaning tip retracted into the protective sleeve of solvent-resistant Delrin®. When the sleeve bottoms out on the barrel extension, push a little farther to expand the cleaning tip in the lug recesses, rotate the tool several times, and remove. Also perfect for cleaning the barrel extension face. May be used dry or with your favorite bore cleaning solvent. Models for 5.56/.223 chambered AR-15 and 7.62/.308 chambered AR-308 rifles. abSPECS: Stainless steel & Delrin. 111/2" (29.2cm) long. Includes 50 cotton cleaning tips.

#749-003-995AV AR-15 Lug Recess Tool w/50 Rolls, 8H30C14 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 35.99

#749-004-531AV AR-308 Lug Recess Tool w/50 Rolls, 8H18D73 � � � � � � � � � � � � � � � � � � � � � � � � � � � 25.99

#749-000-170AV Sinclair AR-15 Chamber Safety Flag, 7K3Q99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4.99

Scrubs Lug Recesses Clean For Secure Bolt Lockup & Reliable Cycling

SINCLAIR AR-15/M16

LUG RECESS CLEANING TOOL

CLE

AN

ING

SU

PP

LIE

SG

UN

SMIT

HIN

G T

OO

LS

AR

-15/M

16


brownells.com

Convenient kit has essential tools you need to build, repair, or modify a custom AR-15/M16 rifle - without duplicating the common tools you already have. Includes our top-quality Brownells Armorer's Wrench, necessary for installation and removal of any barrel with either encapsulated or peg-style barrel nuts. Also has wrenches for flash hiders, M4-style castle nut, and A2 buffer tube nut. Lower Receiver Vise Block snaps into the mag-well just like a magazine to provide a secure clamping surface for a vise without risk of damaging or distorting the receiver. Heavy-duty clamshell Upper Receiver Action Block lets you clamp the upper in a vise to remove or install the barrel or perform other work without crushing, twisting, or damaging it. Fits carry handle and flattop re-ceivers. Two pivot pin tools: one retracts the spring-loaded detent, so you can remove the pivot pin completely from the receiver; the other retains the detent and spring while installing the pivot pin. Bolt Catch Pin Punch has a flat handle that clears the left side of the magwell for easy removal of the bolt catch pivot pin by driving it to the rear. abSPECS: Armorer’s Wrench - Investment cast steel, black finish. Fits barrels up to 11/4" O.D. Lower Receiver Vise Block - High-density urethane plastic, black. Receiver Action Block - Injection-molded Rynite, black. Fits A1, A2, and standard flattop receivers. Pivot Pin Detent Tools/Bolt Catch Pin Punch – Steel, black oxide finish.

AR-15/M16

CRITICAL TOOLS KITEssential Tools Needed To

Build, Customize Or Rebarrel Any AR

#080-000-812AV AR-15/M16 Critical Tools Kit, 8K119H99 � � $ 139.99

Compact, model-specific field kit has all the required tools to service military, law enforcement, and civilian AR-15/M16 rifles in the field or on the bench. Allows complete weapon breakown for routine maintenance and repair, and includes tools for sight adjust-ment, plus removal of barrel nut, flash hider, and receiver extension without damage to any rifle component. This is not a run-of-the-mill cleaning kit with generic tools but a carefully selected high-quality field armorer tool set dedicated to working on AR-pattern rifles. So there’s no confusion, no down time spent scrounging through a big tool box of loose odds and ends. Individual pouches and compartments inside the water and abrasion-resistant, heavy-duty Cordura® nylon field pack case keep all tools secure and sepa-rated to help minimize noise. YKK zippers with oversize pulls, clear I.D. card sleeve on front panel, and loop strip for name tape. Field Pack Case also available separately. abSPECS: Includes #81 MAGNA-TIP® hollow screwdriver handle w/Leupold windage (L/B) and #185-10 bits; 1/16", 1/8" and 1/4" pin punches; 1/2" drive handle; 3/4" nylon/brass hammer; buttstock tool; combination wrench; lower receiver vice block; A1/A2 sight wrench; carrier carbon scraper; Deluxe model buttstock cleaning kit. Approx. 5 lb. (2.3 kg) wt. Field Case - Cordura nylon, O.D. green. 12" (30.5cm) long x 101/2" (26.7cm) high x 31/2" (8.9cm) thick.

AR-15/M16/M4 FIELD MAINTENANCE PACK

#080-000-458AV M16/M4 Field Pack, 8K233E32 � � � $ 259.99#080-000-459AV Field Pack Case, Only, 8K65K05 � � 75.99

Complete, Dedicated “Go Bag” For Field Repair & Maintenance

We’ve bundled two of our most-popular AR wrenches into a handy kit that sets you up to perform critical maintenance, repair, and new-gun building tasks. Our Combination Wrench is an exact duplicate of the original mili-tary tool used for removal/installation of the barrel nut, old- and new-style flash suppressors, and the A2-type rifle lower receiver extension. The Buttstock Tool has a spanner wrench to fit the re-ceiver extension castle nut on M4-style collapsible buttstocks, and it includes interchangeable pins to fit both old- and new-style nuts, so you're ready for either type of nut. For fixed rifle buttstocks, it has a screwdriver blade to remove the buttplate screws and a wrench for the nut on the receiver extension (buffer) tube. There's even a ½" square opening for a torque wrench. Steel, black oxide finish. ab#080-001-157AV AR-15 Wrench Set, 8K64C78 � � � � � � � � $ 94.99

Helps You Quickly Perform Important Maintenance Tasks

The Right Way

AR-15/M16

WRENCH SET

Handy kits contain all the tools required to build, maintain and repair AR-15 rifles. Each tool is selected to perform a specific function with precision and ease and all tools fit inside a durable nylon carry case for convenient storage and transport. Essen-tials Kit contains AR-15 combo tool, torque wrench, upper vise block clamp with gas tube align-ment tool, pivot pin and roll pin

installation tool, mag well vise block and adjustable receiver link. Professional Kit includes the contents of the Essentials Kit plus, AR armorer’s vise, front sight tool, delta ring tool, strap wrench, bore guide, bore brush, bolt carrier brush, chamber brush, magazine/upper receiver brush, nylon handle brush, double-ended cleaning brush, cleaning pick set and AR maintenance mat with printed sche-matic. AR Combo Tool with torque wrench, Adjustable Receiver Link, and maintenance mat also available separately.


TOOL KITS

AR Professionals Kit

#100-012-246AV AR Professional Tool Kit, 7A179C35 � �$ 210.99#100-012-245AV AR Armorers Essentials Tool Kit,

7A84J54� � � � � � � � � � � � � � � � � � � � � � � � 100.99#100-012-248AV AR Combo Tool w/Torque Wrench,

7A38D86 � � � � � � � � � � � � � � � � � � � � � � � 45.99#100-012-249AV Adjustable Receiver Link, 7A8B90 12.09#100-012-247AV AR Maintenance Mat, 7A19M62 � � 23.99

All The Tools Required To Build & Maintain AR-15 Rifles

Our handy, compact tool is uniquely designed to combine sev-eral tools into one. It has a spanner wrench that fits the receiver extension castle nut on M4-style collapsible buttstocks, with inter-changeable pins to fit nuts with both old (round) and new (square) teeth, so you're ready for whatever type of nut is on the gun in front of you. Pins for both styles are included and easily changed by loosening a hex screw in the tool. For fixed rifle buttstocks, there's a screwdriver blade to remove the buttplate screws and a wrench for the nut on the receiver extension (buffer) tube. There's even a ½" square opening for a torque wrench, and even a hole for hang-ing the tool on your peg-board. Fits easily in a range bag or in your pocket for use outside the shop. abSPECS: Steel, black oxide finish. 7" (17.8cm) long. Includes pins for old- and new-style receiver extension nuts. Replacement pins sold below.

REPLACEMENT PINS - Keeps your Brownells Buttstock Tool functioning like new. Helps keep the edges of the receiver extension nut slots undamaged and lessens the chance of marring the metal. Square fits the newer, M4 style collapsible buttstock receiver extension nuts with .164" wide, square engagement slots. Round fits the older style collaps-ible buttstock extension nuts with 1/8" di-ameter, round pin engagement recesses.SPECS: Round - Stainless steel, silver finish. .124" (3mm) diameter. Square - Steel, blue finish. .164" (4mm). Available in 3-Paks.#080-000-451AV Square Replacement Pins, 3-pak,

8K15H02 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 19.99#080-000-452AV Round Repl. Pins, 3-pak, 8K6B21 � � � � 7.99

One Tool Covers Multiple Disassembly/Reassembly Jobs

#080-000-291AV Buttstock Tool, 8K45H33 � � � � � � � � � � � $ 59.99

AR-15/M16/M4

BUTTSTOCK TOOL

ab

GU

NSM

ITH

ING

TO

OLS

Here’s a suite of tools to help maintain your AR-15 and keep it running like the proverbially sewing machine! It's built around the inno-vative Fix-It-Sticks - a pair of com-ponents that fit together to form a robust T-handle tool for driving

the 1/4" hex bit attachments that comprise all the necessary tools to maintain the accuracy and reliability of your AR-15. It comes with a set of 12 chrome-plated steel bit drivers to handle all the screws and fasteners found on the AR-15 itself, popular accessories, and optics. Kit also includes: bolt/carrier group carbon scraper, pin punch for trigger/hammer pins, castle nut wrench, bronze scraper, steel pick, non-marring plastic pin punch for pivot/takedown pins, cleaning brush bit, A2 front sight adjustment bit, set of brass cleaning rods, and a pair of bit adapters for 8-32 threaded cleaning attachments. Tool kit comes inside a durable, soft-sided nylon carrying case, with MOLLE type webbing one side, for go-anywhere convenience. ab

FIX IT STICKS AR-15/M16

MAINTENANCE TOOL KIT

#100-027-821AV AR-15 Maintenance Kit, 2F85K71 � � $ 99.99

Compact, Go-Anywhere Tool Kit for Comprehensive AR Maintenance

This is the Pocket Toolbox® that'll service your AR platform ri-fle and its accessories. Only 4" long when folded, so the entire pack-age slips into your pocket. All-steel construction with grips of durable, no-slip G10 fiberglass, available in Black or Tan. Includes general-purpose pliers, spanner wrench for tightening an M4 castle nut (also doubles as a bottle opener), and a 3/16" slotted screwdriver tip. The pliers are built strong to handle tough jobs - machined (not cast!) from D2 tool steel billet and finished with an ultra-tough Titanium CarboNitride (TiCN) finish. The four-prong M16A2 front sight tool also serves as the magnetic drive socket for the 8 interchangeable, AR-centric ¼"-drive hex bits (1 slot-head, 1 Phillips, 4 hex-head, plus T10 and T15 Torx® bits). Combo 3/8" box wrench for accessory mounts and ½" wrench for scope rings. Carbon scraper also serves as a bolt override device and helps pull MALICE clips through PALS webbing. The 3/32" pin punch is fitted with 8-32 male threads to accept popular Otis cleaning kit components. The 3" drop point knife blade, also made of D2 tool steel with TiCN finish, is swedged with jimping on the spine for excellent hold. A thumb stud makes for easy opening, and the liner lock keeps the blade in place. Don't go to the range without the Multitasker! #100-023-585AV Multitasker Series 3X, Blk, 5C139P39 � �$ 149.99#100-023-586AV Multitasker Series 3X, Tan, 5C139G39 � � 149.99

Pocket-Packable Multitool For Field Repair & Adjustment Of

Your AR-15

AR-15/M16 MULTI-TASKER® SERIES 3X MULTITOOL

The AR-15 is not prone to breaking down a lot in the field, but when something does need adjustment or repair, this compact tool is darned handy to have in your pocket. Think of it as a specialized Swiss army knife for your AR. It has extensions to perform a plethora of quick tasks in the field or at the range. Make adjustments to the gun’s itself or your optic, scrape away carbon build-up from the bolt face, do a tweak here, a bit of tightening up there. Robust, all-stainless-steel construction means the AR Multi-tool is totally weather resistant, and it comes with a handy nylon belt sheath, so you can always have it with you. It’s fold-out tools include a carbon scraper, bolt waist scraper, interior BCG scraper, pivot/takedown pin punch, A2 front sight post tool, castle nut wrench, ½" & ¾" wrenches. It has the following screw bits: 5/64", 7/64" & 1/8" hex; #2 Phillips bit; T10, T15, T20 Torx®; 3/16” flat slot-head. As long the AR Multi-Tool is on your belt, there’s not much that can do wrong on an AR-15 that you can’t fix with it!

A Cleaning/Repair Tool Kit that Fits

on Your Belt

#100-032-918AV AR-15 Multi-Tool, 7A27F36 � � � � � � � � � � $ 29.99


COMPACT AR MULTI-TOOL

Dedicated wrench has four precision-machined teeth that en-sure full, non-slip engagement of all four notches in an M4-type receiver extension nut for easy removal and installation of collaps-ible carbine buttstocks. Transfers all the torquing force to the nut for fast tightening or removal without risk of damage to nut, ex-tension tube, or receiver caused by the wrench slipping. Includes the handy add-on features of our universal M4 buttstock tool: pry blade/screwdriver, 1/2" square torque drive opening, fixed stock re-ceiver extension remover, and a convenient hole in the handle for hanging the wrench on a pegboard. Heavy duty steel construction, machined from a single piece of .312" thick steel, with a durable black oxide finish. abSPECS: Steel, hardened, black oxide finish. 71/8" (18.1cm) long. Fits current-model M4-type receiver extension nuts with four square notches.#080-000-670AV M4 Buttstock Wrench, 9A57F08 � � � � � �$ 79.99

Solidly Engages The Receiver Extension Nut For Easy Installation & Removal Of Carbine Buttstocks

CAR-15/M4

BUTTSTOCK WRENCH

WANT TO LEARN MORE? FREE HOW-TO VIDEOS ONLINE! www.brownells.com

AR

-15

/M16


SINCE 1939

GU

NSM

ITH

ING

TO

OLS

◯25 STARRETT 5/32" CENTER PUNCH - Stakes socket-head cap screws securing the bolt carrier key to the bolt carrier.SPECS: 4" (10.2cm) long. 5/32" (4mm) punch, 3/8" diameter body.#827-512-820AV Starrett 5/32" Center Punch, 7B8M98 � � �$ 9.99

◯26 PIVOT PIN DETENT DEPRESSOR - Depresses spring-loaded detent to free the pivot pin for removal. Virtually impossible with-out this tool. Does not fit Colt Mfg. AR-15.SPECS: Blued steel. 17/8" (4.8cm) long.#080-216-010AV Pivot Pin Depressor, 8K4C62 � � � � � � � � � �$ 5.99

◯27 PIVOT PIN DETENT INSTALLATION TOOL - Makes installa-tion of the M16 pivot pin and its detent faster and easier. Prevents loss of detents. Guides detent and spring into place and serves as a slave pin when installing the pivot pin.SPECS: Blued steel. 1/4" (6.3mm) diameter. 21/2" (6.3cm) and 11/2" (3.8cm) long “legs”.#080-216-011AV Pivot Pin Install. Tool, 8K9Q44 � � � � � � � $ 11.99

◯28 BROWNELLS BROKEN SHELL EXTRACTOR - Fastest way to remove the front portion of a separated 5.56mm (.223) case with-out field stripping. Engages the rim of case mouth and pulls case from the chamber when charging handle is pulled back. Adjustable to ensure complete engagement of case mouth.SPECS: Blued steel. 2" (5cm) long.#080-000-441AV .223 Broken Shell Extractor,

8K15H66 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 19.99

◯29 445-6 BIT - Use on the AR-15 windage screw, pistol grip screw, and right side of the pivot pin.SPECS: 11/2" (3.8cm) long. Approximately .360" (9.1mm) diameter x .055" (1.4mm) thick.#080-445-655AV 445-6 Bit, 8K3I07 � � � � � � � � � � � � � � � � � � � �$ 3.99

◯30 RED BIT - Use on left side of the pivot pin.SPECS: 11/2" (3.8cm) long. Approximately .398" (10.1mm) diameter x .078" (1.98mm) thick.#080-430-400AV RED Clamp Screw Bit, 8K5C13 � � � � � � � �$ 6.99

◯31 LB BIT - Use on the butt plate screws.SPECS: 11/2" (3.8cm) long. Approx. .428" (10.9mm) diameterx .070" (1.8mm) thick.#080-430-430AV L/B Clamp Screw Bit, 8K5I78 � � � � � � � � � �$ 6.99

◯32 SIGHT TOOLS - Quickly adjust front and rear sights. A1 fits older AR-15s and M16s, A2 fits M16A2 configuration rifles.SPECS: Blued steel. 13/8" (3.5cm) long x 3/4" (19mm) diameter#078-015-001AV A1 Sight Wrench, 7B8G46 � � � � � � � � � � $ 10.99#078-015-002AV A2 Sight Wrench, 8G9E76 � � � � � � � � � � 10.99

SPECS: #1, 1/16" (1.6mm) x 23/4" (7cm) L; #2, 5/64" (2mm) x 31/4" (8.2cm) L; #3, 3/32" (2.4mm) x 31/2" (9cm) L; #4, 1/8" (3.2mm) x 4" (10.2cm) L; #6, 3/16" (4.8mm) x 41/2" (11.4cm) L.#230-112-105AV Roll Pin Punch Kit, set of 5, 7H22I86 � �$ 26.99

⑱ ⑲ CARRIER KEY BIT KIT - Two hex bits for installing the bolt carrier key socket head screws, plus an adapter that will con-nect the Carrier Key Bits to the 3/8" Drive Torque Wrench. Small and large bits handle both early and late guns.SPECS: Heat-treated steel. 185-2 Bit - 1/8" (3.2mm) hex bit. 185-10 Bit - 9/64" (3.6mm) hex bit. 1" (2.5cm) long. Adapter - Heat-treated steel with reten-tion clip adapts 3/8" square drive to accept 1/4" shank hex bits.#080-216-050AV Carrier Key Bit Kit, 8K6E33 � � � � � � � � � � � �$ 9.99#080-185-200AV 185-2 Hex Bit, 8K3Q08 � � � � � � � � � � � � � � � 3.99#080-185-010AV 185-10 Hex Bit, 8K3J71 � � � � � � � � � � � � � � � 4.99#080-430-025AV Socket Drive Adapter, 8K4J96� � � � � � � � � 5.99

◯20 BROWNELLS ROLL PIN HOLDERS (STARTER/SETTER PUNCHES) - Easily hold even the smallest roll pins for positioning. Complete installation with Brownells Roll Pin Punches.SPECS: 1/8" (3.2mm), 3.5mm (.138") diameter - 5" (12.7cm) long. 3/32" (2.4mm), 5/64" (2mm), 1/16" (.40mm) diameter - 41/2" (11.4cm) long.#080-685-000AV Roll Pin Holders, set, 8K37Q19 � � � � � � $ 49.99

◯21 BOLT CATCH PIN PUNCH - Specially made, slab-sided punch clears left side of the magazine well allowing bolt catch pivot pin to be removed by driving it to the rear.SPECS: Steel. 4" (10.2cm) long. 3/32" (2.4mm) diameter tip.#080-216-012AV Bolt Catch Pin Punch, 8K11C99 � � � � � �$ 15.99

◯22 STARRETT 1/8" PUNCH - A best-quality punch for removing solid pins such as those on the hammer or trigger.SPECS: 4" (10.2cm) long. 1/8" (3.2mm) diameter tip.#827-525-800AV Starrett Pin Punch, 7B6N33 � � � � � � � � � � �$ 6.99

◯23 TAPER PIN STARTER - This tool’s radiused face matches the end of the front sight housing taper pin to prevent damage during removal. The taper pin is removed by driving from left to right; the small end is on the left side of the barrel, the large end is on the right side!SPECS: 4" (10.2cm) long. 3/32" (2.4mm) diameter tip.#827-530-320AV Taper Pin Starter, 7B14K16 � � � � � � � � � � $ 20.99

◯24 STARRETT 1/4" PUNCH - Facilitates removal of the takedown pin and safety lever/fire control selector.SPECS: 4" (10.2cm) long. 1/4" (6.3mm) diameter tip.#827-525-840AV 1/4" Punch, 7B7M16 � � � � � � � � � � � � � � � � � � � $ 7.99

⑨ MAGNA-TIP® #81 HANDLE - Preferred by many for general use, shank is long enough to reach inside the pistol grip. Use with Stubby Handle to remove Pivot Pin.SPECS: Overall length 8" (20.3cm).#080-086-181AV #81 Solid Handle, 8K10D67 � � � � � � � � � �$ 13.99

⑩ MAGNA-TIP® STUBBY HANDLE - Use with various MAGNA-TIP® bits on butt plate screws, windage screw, AR-15 pivot pin head, etc. When removing the pivot pin, use Stubby Handle with the “RED” bit on the left side of the pin and the regular handle with the 445-6 bit on the right side.SPECS: 21/2" (6.3cm) overall. 17/8" (4.8cm) handle, 5/8" (15.9mm) shank.#080-090-000AV Stubby Handle, 8K8J95 � � � � � � � � � � � � $ 12.99

⑪ SNAP RING PLIERS - For removal and installation of the handguard snap ring. Extra tips included for other uses.SPECS: Blued steel with vinyl dipped handles. Tip sizes - Straight, .045" (1.1mm); Straight, .060" (1.5mm); 45°; 90°.#531-460-000AV Snap Ring Pliers, 1C12E02 � � � � � � � $ 17.99#531-462-500AV Replacement Snap Ring Plier

Tips,4 pair set, 1C5N65 � � � � � � � � � � 6.99

⑫ BARREL NUT ALIGNMENT GAUGE - Fits into the end of the bolt carrier key to ensure that the barrel nut is properly aligned during installation of AR-15/M16 barrel. Improper alignment can damage the bolt carrier key and/or the gas tube.SPECS: Steel. .178" (4.5mm) diameter x 3" (7.6cm) long.#080-216-014AV Barrel Nut Align. Gauge, 8K5D46 � � � � � $ 6.99

⑬ 5.56mm (.223) HEADSPACE GAUGE - Measures maximum headspace. Essential for checking out rifles that have seen heavy use or that have been rebarreled. Not a regular “field” gauge but made to Colt factory dimensions.SPECS: 1.65" (4.2cm) overall (this is NOT the “Headspace” dimension). .3655" (9.3mm) diameter.#319-418-033AV 5.56 Headspace Gauge, 8K27G27� � � � �$ 30.99

⑭ BROWNELLS #250 CHAMBER MIRROR - Highly polished, steel mirror drops into the chamber to aid in detailed inspection. Will not move beyond throat.SPECS: 13/16" (3cm) long.#084-174-250AV #250 Chamber Mirror, 4H11B58 � � � � � $ 14.99

⑮ CLEANING ROD SMALL ARMS (W/ADAPTER) - Threaded for 8-36 U.S. military cleaning brushes; includes adapter that accepts commercial 8-32 brushes and accessories.SPECS: Steel, parkerized finish. .204" (5.2mm) diameter rod. 4 sections, each 73/8" (18.7cm) long - 3 thread into 4th handled section. Overall length, with Jag, 293/4" (75.6cm). Adapter is 31/4" (8.2cm). Jag is 23/4" (7cm) with oval slot.#084-116-100AV Cleaning Rod, Small Arms,

4H14D46 � � � � � � � � � � � � � � � � � � � � � � � � �$ 16.99

⑯ COMBINATION WRENCH - Removes the barrel nut. Re-moves/installs flash suppressor and lower receiver extension.SPECS: Blued steel. 5" (12.7cm) lg x 2" (5cm) w x 1/4" (6.3mm) thick.#080-216-015AV AR-15 Combo Wrench, 8K28F74 � � � � $ 34.99

⑰ BROWNELLS ROLL PIN PUNCHES - The ONLY way to prop-erly install or remove roll pins without damage to either the pin or the surrounding metal. A small raised projection in the face of the punch automatically centers the punch and prevents the roll pin from collapsing.

The RIGHT way to repair and service the AR-15/M16/M4! These kits contain the tools the gunsmith or armorer needs to perform full maintenance and repairs of these rifles in the field or shop. Each tool is designed to do its job in the simplest, most effective manner to maintain and repair these guns cor-rectly – and save time doing it. Standard Kit contains the tools needed to work on the AR-15 and the M16A1 through A4. Premium Kit contains all the tools of the Standard Kit, plus an additional 11 items necessary to repair and maintain the M4 carbine as well. Both kits come in a custom-fitted, hard-side tool box that’s made from nearly indestructible molded polymer resin and meets mil-spec MIL-C-4150 and ATA specifications. The Standard kit’s foam inserts are pre-cut with spaces for the M4 tools, so you can turn it into a Premium Kit anytime simply by adding the Upgrade Kit. ab

① 12 OZ. BALLPEEN HAMMER - Heavy enough to drive out stubborn tapered front sight retaining pins, yet light enough for installation/removal of solid and roll pins.SPECS: 121/4" (31.1cm) long overall. Head has 13/16" (3cm) dia. flat face, 1" (2.5cm) dia. peen.#956-000-001AV 12 oz. Ballpeen, 6E14M07 � � � � � � � � � � � $ 18.99

② 3/4" PLASTIC/BRASS HAMMER - For the thousand and one instances when a part needs a gentle tap during assembly/disas-sembly. Great when fitting stocks.SPECS: 3/4" (19mm) diameter faces. 10" (25.4cm) hickory handle. Weighs approximately 4 oz. (113 g).#818-600-343AV 3/4" Plastic/Brass Hammer, 8A13A77 � $ 17.99

③ FIRING PIN PROTRUSION GAUGE - Essential for properly measuring the amount of the firing pin projecting through the bolt. Too little causes misfires; too much, pierced primers.SPECS: Steel. 2" (5.1cm) long, 1/4" (6.3mm) wide.#080-216-013AV AR-15/M16 Firing Pin Gauge,

8K21G47 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 25.99

④ 1/2" SQUARE DRIVE TORQUE WRENCH - Necessary to apply the manufacturer’s recommended 30 foot pounds of torque to the barrel nut when installing barrel on receiver. Self-limiting design “clicks” at torque setting.SPECS: Chrome-plated steel. 171/8" (43.5cm) long. 1" (2.5cm) diameter handle. 30-150 ft. lb. range.#018-150-050AV 1/2" Torque Wrench, 4B61G14 � � � � � � � �$ 80.17

⑤ BROWNELLS SHOP APRON - High quality, durable apron keeps clothing clean and free of grease, oil, and carbon.SPECS: 391/2" (100.3cm) long. 301/2" (77.5cm) wide. Upper and lower pockets. Ties: each 271/2" (69.8cm) long. Neck strap: 213/4" (55.2cm) long.#084-071-000AV Brownells Long Shop Apron,

4A25F47 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 33.99

⑥ ACCU-GRIP BARREL VISE JAWS (Premium Kit Only) - Massive aluminum jaws lined with non-slip polyurethane elastomer padding grip tight without marring the barrel. Has grooves for both standard and heavy barrel contours. SPECS: Machined aluminum with blue polyurethane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 37/8" (9.8cm) long. Fits 4" and wider vises.#852-015-000AV Accu-Grip Vise Jaws, 2E92L31 � � � � � $ 126.99

VISE JAWS (Standard Kit) - Holds a barrel securely in a bench vise without damaging it. Non-marring aluminum with milled grooves to accept both standard or heavy barrels. Not shown. Re-placed by Accu-Grip Vise Jaws in Premium Kit.Cast aluminum. 35/8" (9.2cm) long x 21/4" (5.7cm) wide x 27/8" (7.3cm) high. #795-015-100AV Barrel Vise Jaws, 8K20E03 � � � � � � � � � � $ 28.99

⑦ BROWNELLS BENCH MAT - Neoprene rubber mat provides a smooth, non-marring, oil-and solvent resistant work surface no matter where you are.SPECS: 171/2" (44.4cm) long. 12" (30.5cm) wide. 3/16" (4.7mm) thick.#358-128-316AV Assy/Disassy Mat, 8E21N09 � � � � � � � � � $ 28.99

⑧ 101/2" LONG, 1/2" SQUARE DRIVE HANDLE - Use with AR-15/M16 Combination Wrench to loosen the barrel nut and remove barrel. Long enough to provide ample leverage.SPECS: Chrome-plated steel. 101/2" (26.7cm) long. 13/16" (20.6mm) diam-eter handle.#221-141-600AV 101/2"x1/2" Drive Handle, 3D11D43 � � � � $ 17.99

TOOL KITS FOR AR-15/M16/M4Complete Tool Kits To Service & Repair Military & Civilian AR-15/M16 Rifles & M4 Carbines

#080-001-291AV AR-15/M16 Standard Armorer’s Kit, complete with tools & case, 8K1280F51 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 1499.99#080-216-003AV Upgrade Kit for AR-15/M16 Standard Armorer’s Kit, 8K288N25 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 349.99#080-001-292AV AR-15/M16/M4 Premium Armorer’s Kit, complete with tools & case, 8K1546F05 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 1799.99

One Kit Does It All !

AR

-15/M

16


brownells.com

The Brownells Armorer's Wrench is a tool you'll find yourself reaching for often, whenever you're building, repairing, or maintain-ing AR-15s. The standard 6-pin barrel nut wrench works on both peg-style and encapsulated barrel nuts for standard and free-float handguards. “Can’t slip” 4-pin castle nut wrench enables secure installation and removal of M4-carbine type receiver extensions. There's a cutout for an A2 receiver extension nut, and another cutout accepts a 1/2" torque drive. There are also slots that fit 2 different-sized wrench flats commonly found on flash hiders and muzzle brakes. Of course, it has the last-a-lifetime quality you expect from Brownells tools - heavy-duty investment-cast steel construction, precise dimensions, a comfortable matte anti-slip finish, and com-plete instructions. ab

AR-15/M16

ARMORER’S WRENCH

Multiple Tools In One - You'll Always Want It Close By!

#080-001-208AV AR-15/M16 Armorer’s Wrench, 8K48A82 � �$ 59.99

Durable steel wrench gives you seven tools-in-one for main-tenance, repair or building AR-15 and M16 rifles. Use to install or remove: free float tubes and peg-style barrel nuts, standard barrel nuts, carbine stock, compensator, extension tube and buttstock screw. Special features include 5/8" and 3/4" wrench slots, a 1/2" square hole for a torque wrench, plus screwdriver tip for buttstock. abSPECS: 4140 steel, Parkerized, matte black. 12" (30cm) long, 1" (2.5cm) wide handle.

DPMS AR-15/M16 MULTI-TOOL

Seven Function Tool Lets You Build & Repair AR-15s

#231-000-007AV AR-15 Multi-Tool, 3B28J56 � � � � � � � � � �$ 47.99

Steel, dual function wrench lets you easily remove your old extension tube and install a new-style, A4 stock. Spanner has three lugs to fit the A4-style castle nut. Provides a non-slip fit so you can correctly torque the stock to the receiver. Also, the comfortable, rubber coated handle features a cut-out to fit the receiver extension tube to remove the A1 or A2 stock. abSPECS: Steel, parkerized finish. 75/8" (19.3cm) long.


M4 STOCK WRENCHInstall M4 Carbine

Stocks Without Damage

#739-000-010AV M4 Stock Wrench, 9C8B18 � � � � � � � � � � $ 9.99

Multi-function steel tool helps keep your rifle in the ready condi-tion. Use it to tighten or remove the barrel nut, and install or remove most popular free-float handguard tubes. Single-point wrench tightens/removes the receiver extension nut, and side notches tighten or remove a variety of muzzle devices, including flash hid-ers and muzzle brakes. It even has a tab that acts as a screwdriver for the A1/A2 stock. Includes ½" drive opening.SPECS: Carbon steel, black, painted finish. 12 5/8" (32cm) long.

BARSKA AR-15/M16 COMBO WRENCH TOOL

Performs Nearly Every AR-15/M16 Maintenance Operation

#100-006-638AV AR-15 Combo Wrench Tool, 8F20M83 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 29.99

Magpul’s hefty all-steel tool helps you perform a variety of key maintenance tasks on the AR platform. It engages both GI-style and pin-style barrel nuts for free-float tubes. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with Magpul ASAP plates. Fits the 3/4" flats on standard-sized flash hiders. Can be used as a driver for a 1/2" torque wrench, with relevant torque specifications stamped on the Magpul tool for quick refer-ence. It even has two flat hammer faces AND a convenient built-in bottle opener for refreshments after the build is complete (fits both metric and SAE bottle caps!). abSPECS: American-made steel, heat-treated for superior hardness, with a grip-enhancing manganese phosphate finish. 11.7" (29.7cm) OAL, .35" (9mm) thick.

MAGPUL AR-15/M16

ARMORER’S WRENCH

Magpul-Quality Tool Eases A Variety Of Key AR Maintenance Tasks

#100-015-279AV Armorer’s Wrench, 9Z65L79 � � � � � � � � �$ 75.95

Handy all-in-one tool handles the tasks necessary to build and maintain your AR-15 or M16. It’s a barrel nut wrench, muzzle device wrench, spanner wrench, fore-arm wrench, flat tip screwdriver, A2 tube remover, receptacle for 1/2" drive/torque wrench - and a bottle opener. Long handle give plenty of leverage for buttstock and barrel removal/installation, and the 1/2" drive receptacle allows the use of a torque wrench, so you can get things tightened down correctly. It even has a flat face on one side that can be used as a hammer. abSPECS: Heat treated alloy steel, matte olive drab powder coat finish.

Like A One-Piece Tool Kit

#100-009-876AV TAPCO Armorer’s Tool, 5A30K36 � � � � $ 43.99

TAPCO AR-15/M16 ARMORER’S TOOL

Extra-heavy duty armorers wrench provides easier installation and removal of all barrels up to 11/4" diameter with either encapsu-lated or peg-style barrel nuts. Extra-long handle features smooth, contoured edges for comfortable use. Includes 1/2" square drive opening for torque wrench application; 5/8" and 3/4" slots fit receiver extensions and A1/A2 flash suppressors .223 for AR-15/M16 applica-tions, .308 for use with AR-Style .308 rifles. abSPECS: 17-4 stainless steel, black oxide finish. 12" (30cm) long, 1" (2.5cm) wide handle.

SMITH ENTERPRISE AR-15/M16/AR-STYLE .308

ARMORERS WRENCH

Fits All Standard Models; Encapsulated & Peg-Style Nut Wrench

#851-000-068AV .223 Armorers Wrench, 1E61L54 � � � � � $ 89.99#851-115-001AV .308 Armorers Wrench, 1E61F54 � � � � 96.99

Long handled for quicker, easier removal or installation of collapsible stocks. Grabs the receiver extension nut, no need for a breaker bar. abSPECS: Heat-treated, 17-4 stainless steel, black oxide finish. 9" (22.8cm) long. 7" (17.7cm) handle.

Easy To Use; Plenty Of Leverage

#851-015-150AV AR Carbine Wrench, 1E53B19 � � � � � � � $ 62.99

SMITH ENTERPRISE AR-15/M16

CARBINE STOCK WRENCH

Chromoly-steel wrenches accept stan-dard torque wrench drives and help quickly assemble AR-15 rifles. Wrenches feature black phosphate finish for resistance to wear and corrosion, and Spikes Tactical logo. Castle Nut Wrench accepts 3/8" drive and has cutouts to fit onto standard AR-15 carbine buffer tube castle nut. USGI Barrel Nut Wrench accepts ½" drive. Features seven pins made of tool steel and TIG welded into place. Fits standard AR-15 barrel nuts. All wrenches sold separately. ab

SPIKES TACTICAL AR-15/M16

WRENCHESWrenches Help Assemble AR-15s

Castle Nut Wrench

#100-014-394AV Castle Nut Wrench, 3B44K11 � � � � � � � � $ 47.79#100-014-395AV USGI Barrel Nut Wrench, 3B44H26 � � 47.95

Takes all the fumbling, grumbling and frustration

out of installing or removing AR-15 handguards. Easy-to-use, just hook tool into mag well and push down on the handles. Pushes the retaining ring straight down, allows both handguards to be removed in just seconds. abSPECS: Steel, rubber handles, matte finish, black. 111/4" (28.6cm) long. Fits AR-15 A1, A2, M-16 and AR-10.

DARREL’S CUSTOM AR-15/M16

HANDGUARD REMOVAL TOOLFast & Fumble-Free

Handguard Removal

#100-000-438AV AR-15 Handguard Removal Tool, 5K23K08 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99

GU

NSM

ITH

ING

TO

OLS

◯43 MAGAZINE FEED LIP TOOL - Bends the feed lips back into place, so they guide the cartridge body properly to prevent prob-lems and jams caused by bent magazine feed lips.SPECS: Steel shank, blued; plastic handle. 51/2" (14cm) long.#080-000-314AV AR-15 Mag Feed Lip Tool, 8K10Q98� � $ 12.99

◯44 GAS TUBE WRENCH - Clamps around the fragile gas tube to prevent damage during both removal and installation.SPECS: Steel, blued. 6" (15.2cm) long.#133-100-015AV Gas Tube Wrench, 3C24K20 � � � � � � � � $ 35.99

◯45 BOLT CARRIER CARBON SCRAPER - Removes hard-to-get-at carbon buildup without damaging the bolt carrier. Solves cycling problems caused by carbon deposits in the bolt recessSPECS: Steel reamer, plastic handle. 61/2" (16cm) long.#133-100-016AV AR-15/M16 Carrier Carbon Scraper,

3C24D20 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99

◯46 BUTTSTOCK TOOL - Combines several tools into one for taking apart M4-style collapsible buttstocks. Includes pins for old- and new-style receiver extension nuts.SPECS: Steel, black. 7" (17.8cm) long.#080-000-291AV Buttstock Tool, 8K45H33 � � � � � � � � � � � $ 59.99

◯33 3/8" SQUARE DRIVE T-HANDLE TORQUE WRENCH - Pre-cisely calibrated to apply the required 40 foot pounds of torque to tighten the two socket-head cap screws on the bolt carrier keySPECS: Chrome-plated steel. 31/2" (8.9 cm) long. 41/8" (10.5cm) wide handle#792-000-005AV 3/8" Drive Torque Wrench,

2G106E46 � � � � � � � � � � � � � � � � � � � � � � � � �$ 113.99

◯34 ARMORER'S WRENCH - Does a bunch of important jobs: 6-pin barrel nut wrench for both peg-style and encapsulated barrel nuts, "can’t slip" 4-pin castle nut wrench for M4-type receiver exten-sions, plus cutouts for A2 receiver extension nut, 1/2" torque drive, and two common sizes of flash hider/muzzle brake wrench flats. Heavy investment-cast steel construction for a lifetime of service. A tool you'll find yourself reaching for all the time!#080-001-208AV AR-15/M16 Armorer’s Wrench,

8K48A82 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 59.99

◯35 MIL-SPEC TOOL BOX - Heavy-duty case with four draw-ers, top compartment, and double latches. O-ring seals keep dust and moisture out; built-in wheels and a sturdy, retractable pull handle for easy transport. Extra storage space for parts, manuals, etc. Meets 81-41/STANAG 4280 military standard. SPECS: 24" (61cm) wide, 18" (45.7cm) high, 14¾" (38.1cm) deep. 41 lb. wt.#100-015-616AV Mil-Spec Tool Box, 8K714N67 � � � � � � $ 889.99

ADDITIONAL TOOLS IN PREMIUM KIT:

◯36 FRONT SIGHT BENCH BLOCK - Big, tough, polyethylene block gives fitted support for installing/removing the front sight assembly on mil-spec AR-15 rifles and carbines.SPECS: 4" (10.2cm) dia. x 111/16" (4.3cm) high.#080-000-252AV AR-15 Front Sight Bench Block,

8D33J18 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 38.71

◯37 UPPER RECEIVER ACTION BLOCK - Tough Rynite block and insert surround the entire upper receiver to let you tightly clamp an A1, A2, or standard flattop receiver in a large bench vise for bar-rel removal/installation without twisting the receiver or damaging barrel detent pin and receiver detent notch.SPECS: Block - 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert - 8" (20cm) long, 1" (2.5cm) diameter.#080-000-661AV Upper Receiver Action Block,

8K34K99 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 42.99

◯38 LOWER RECEIVER VISE BLOCK - Unbreakable, high-density urethane vise block inserts into magazine housing and takes all the clamping force, so the lower receiver won’t be damaged or distorted. Magazine catch locks to the block.SPECS: 5" (12cm) high, 21/4" (5.7cm) wide, 3/4" (19cm) thick.#080-000-662AV Lower Receiver Vise Block, 8K18I74 � $ 24.99

◯39 HANDGUARD REMOVAL TOOL - Takes the fumbling and frustration out of installing or removing AR-15, M16A1/A2, and AR-10 handguards. Rubber coated steel won’t mar gun.SPECS: 111/4" (28.6cm) long.#100-000-438AV AR-15 Handguard Removal Tool,

5K23K08 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 34.99

◯40 MAGAZINE CATCH INSTALLATION & REMOVAL TOOL - Compresses the spring for easy removal of the magazine catch.SPECS: High-impact plastic, black.#100-002-127AV Magcatch Tool, 3A9Q88 � � � � � � � � � � � � � $ 11.99

◯41 TAKEDOWN PIN REMOVAL TOOL - Drives out the front and rear takedown pins without marring the metal.SPECS: High-impact plastic, black.#100-002-125AV Bench Model Pushtool, Black,

3A9H43 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 11.99

◯42 BOLT EJECTOR TOOL - Steel clamp captures the bolt head, and turnscrew depresses the ejector for faster, easier removal and installation of plunger-style ejectors.SPECS: Steel, blued. Plastic handle.#080-792-002AV Bolt Ejector Tool, only, 8K17B25 � � � � � $ 20.99

An exact duplicate of the original factory/military design so you know it will fit and work. Use for several jobs: to remove the barrel nut; to remove and install old and new flash sup-pressors; to remove and install the lower receiver extension. abSPECS: Blued steel. 5" (12.7cm) long x 2" (5cm) wide x 1/4" (6.35mm) thick.

AR-15/M16

COMBINATION WRENCHOriginal Factory Design Simplifies

Disassembly/Reassembly

#080-216-015AV AR-15 Combo Wrench, 8K28F74 � � � � $ 34.99

AR

-15

/M16


SINCE 1939

WE'RE HERE TO HELP.

GU

NSM

ITH

ING

TO

OLS

Heavy-duty strap wrench gives you plenty of leverage to remove screw-

on free-float handguard tubes, even those sealed with thread locker or “frozen” on by corrosion between the barrel nut and guard. Large, adjustable strap of tough, reinforced rubber wraps securely around any diameter handguard, with no risk of scratching the finish, and grasps the guard tighter as you apply pressure. Lets you position the strap right over the threaded end of the tube for maximum torque transfer where it’s needed most. Hefty steel handle won’t bend, no matter how much force you apply, and machined aluminum head maintains optimal alignment of handguard, strap, and handle. In-dispensable time-saver for professional armorers or anybody who regularly faces the chore of changing handguards. abSPECS: Steel handle, aluminum head, rubber strap. 10" (25.4cm) O.A.L.

ARRINGTON ACCURACY WORKS AR-15/M16

FREE-FLOAT HANDGUARD STRAP WRENCH

Plenty Of Leverage To Remove & Reinstall Any

Diameter Float Tube

#100-004-209AV Free-Float HG Wrench, 3C61I31 � � � � � �$ 95.99

Handy tool elimi-nates the need for a sec-ond pair of hands when removing AR-type hand-guards. Simply insert the hooked end of the tool into the mag well, position handles over delta ring, and push down to compress the delta ring spring. Made of strong 1/4" (6.4mm) steel rod, with synthetic rubber coating to protect gun from surface scratches. abSPECS: Steel, rubber-coated, black. 11" (27.9cm) long. Fits AR-15, M16A1 & A2, and AR-Style .308 rifles with delta rings.

Makes Taking The Handguard Off Fast,

Easy & Painless

#080-000-487AV Handguard Removal Tool, 8K15M95 � �$ 19.99


HANDGUARD REMOVAL TOOL

Easily grips all types and sizes of AR-15/M16 tube handguards, for faster installation and removal. Fiber reinforced rubber strap with steel handle gives plenty of leverage, and you can attach a 3/8" drive torque wrench. abSPECS: Nickel-plated aluminum handle, 63/8" (16cm) long. Fits hand-guards up to 3" (7.6cm) in diameter.

GLENAIR AR-15/M16 STRAP WRENCHSafer, Easier Installation

& Removal Of Tube Handguards

#382-100-015AV AR Strap Wrench, 2H48F51 � � � � � � � � � $ 65.99

Eyeballing a railed, free-float handguard for perfect alignment with your flattop re-ceiver is only half the battle. Keeping it from going cockeyed as you tighten the locking

ring is another story. Talk about frustrating! Avoid the hassle with this handy jig that aligns the top handguard rail with the receiver rail and keeps it there. Just slide the jig on the rails, secure its setscrews, and tighten the locking ring—you’re done! With the time it saves, this tool will pay for itself the first few times you use it. A must for maintaining handguard alignment to ensure night vision devices, vertical grips, flip-up front sights, and other add-on accessories are also properly aligned. Designed for use with railed, free-float tubes that have a locking ring. abSPECS: Machined 6061 T6 billet aluminum, hardcoat anodized, black. 31/2" (8.9cm) long, 1" (2.5cm) wide, 11/2" (3.8cm) high.

Maintains Precise Handguard Alignment While Tightening The Locking Ring

#080-000-368AV Handguard Alignment Tool, 8K42C96 � � $ 59.99

AR-15/M16

FREE-FLOAT HANDGUARD ALIGNMENT TOOL

Stainless steel wrench helps tighten the forearm collar on the forearm tube for AR-style rifles.

Features hole at the rear of the handle to let you hang it from a peg board at your bench for easy access. abSPECS: Stainless steel, natural finish. 7 3/4" long. AR-308 model fits Ar-maLite® AR-10®, Knight’s Armament SR-25, and DPMS LR-308-pattern rifles.

PRECISION REFLEX AR-15/M16/AR-STYLE 308

FOREARM WRENCHEases Installing & Removing

AR Handguards

#714-000-027AV AR-15/M16 Forearm Wrench, 4A17B55 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 20.99

#714-000-026AV AR-308 Forearm Wrench, 4A17I55 � � � 20.99

Dedicated, heavy-duty wrenches are designed to enable easy removal and in-stallation of the proprietary

barrel nut on the Colt LE6940 Advanced Law Enforcement Carbine (ALEC). Self-contained Armorer Wrench features a large, 3/8" thick handle with a 1/2" square cutout for a torque wrench or breaker bar, plus a notch for removing the ALEC flash suppressor. Compact Bar-rel Nut Wrench has the 1/2" torque driver/breaker bar cutout only. abSPECS: Steel, Parkerized, matte black. Armorer Wrench - 9" (23cm) long overall, 1.25" (3.17cm) wide handle.

ARRINGTON ACCURACY WORKS AR-15/M16

COLT LAW ENFORCEMENT CARBINE ARMORER’S WRENCH

For Removing/Installing Barrel Nut On Colt

LE6940 Carbine

#100-005-370AV Armorer Wrench, 3C117N12 � � � � � � � �$ 135.14#100-005-371AV Barrel Nut Wrench, 3C85H31 � � � � � � � 98.44

Handy tool aids in applying straight-line torque for fast, easy installation of the barrel nut without scratching the exterior of the upper receiver. Helps ensure the right amount of torque is evenly applied, while maintaining proper alignment of the barrel, upper receiver, and gas tube ports. Use with any barrel nut wrench or free-float tube wrench and a torque wrench with a ½" square drive. Simply clamp the barrel nut wrench handle firmly in a bench vise, insert the barrel into the upper receiver, and finger tighten the barrel nut. Slide the barrel through the wrench, insert the Torque Tool in the back of the receiver until the teeth lock into the locking lugs in the receiver extension, and apply torque with the torque drive through the Tool to tighten the barrel nut. Precision machined from heavy-duty steel bar stock for years of reliable service. abSPECS: Machined steel, black oxide finish. Requires a ½" square drive torque wrench. Instructions included. AR-15/M16 – 9" (22.9cm) long, 1" (2.5cm) diameter. Fits barrel extensions of AR-15/M16/M4 and clones chambered in .223/5.56. AR-Style .308 – 10" (25.4cm) long, 1.18" (3cm) di-ameter. Fits barrel extensions of ArmaLite® AR-10® and DPMS-pattern AR-style .308 rifles, except does NOT fit DPMS G2 uppers or barrel extensions.

Fast, Easy Way To Tighten Barrel Nut Without Damaging It Or

The Receiver

#080-000-637AV AR-15/M16 Barrel Ext. Torque Tool, 8K42N08 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 49.99

#080-001-040AV AR-308 Barrel Ext. Torque Tool, 8K38M75 � � � � � � � � � � � � � � � � � � � � � � � � � � � 49.99

AR-15/M16/AR-308

BARREL EXTENSION TORQUE TOOL

This tool secures an AR-15 upper receiver from inside so you can clamp it in a bench vise to work on it. It's a champ for removing stubborn or seized barrel nuts without damaging the barrel or the receiver. Use it to hold the receiver while installing a muzzle device, gas block/tube, forward assist, dust cover, or optic. Works equally well with stripped or complete uppers. Teeth on the front of the tool engage the bolt locking lugs in the receiver extension, while a spine on the tool's shank locks into the charging handle recess. A cutout on the tool enables you to work on a receiver with a close dust cover and can be used to aid in installing a dust cover. Flats at the rear are clamped in your bench vise; the entire tool/receiver unit can be rotated in the vise at 90-degree increments to position it for ease of access while working. Secured both standard forged mil-spec upper receivers and billet receivers with unusual exterior contours that will not fit into traditional clamshell receiver clamping tools. Hardened 4140 carbon steel with a tough black oxide finish. Not compatible with .22 LR or pistol caliber upper receivers. ab


UPPER RECEIVER RODHolds Upper Securely

in Bench Vise While You Work on It

#100-032-822AV Upper Receiver Rod, 2A111L43 � � � � � $ 124.95

Custom barrel nut wrench is specifically designed to make in-stalling Midwest Industries handguards fast and easy. Engineered to transmit maximum torque smoothly and evenly to the nut without slipping and marring the gun. Long, easy-to-grasp plate steel handle provides plenty of leverage. Also fits standard handguards and most standard pin-type barrel nuts, too. abSPECS: Steel, black oxide finish. Approximately 77/8" (20cm) long x 1/4" (6.4mm) thick.

For Maximum Torque Without Marring Or Slipping

#100-005-397AV Barrel Nut Wrench, 2A10D71 � � � � � � � � $ 14.99


BARREL NUT WRENCH

Heavy-duty wrench pro-vides plenty of leverage for installing and removing barrel nuts when used with a 3/8" or 1/2" drive breaker bar, socket wrench, or torque wrench. Cut from 3/8" thick steel, with plenty of metal so it won’t flex under pressure while trans-ferring the torque evenly to the nut. Models available for AR-15/M16, ArmaLite® AR-10® and DPMS/KAC AR-style .308 rifles. Armorer’s AR-15/M16 model has a built-in 10"-long handle for convenience, plus additional holes between pins help with proper gas tube align-ment. Still includes 3/8" and 1/2" drive cutouts. abSPECS: 1018 steel, black oxide finish. AR-15 fits mil-spec AR-15/M16/M4 and clones. AR-10 fits ArmaLite AR-10 only. DPMS/KAC fits DPMS and Knight’s Armament AR-style .308 rifles only.

Plenty Of Leverage For Quick Barrel Removal &

Installation

#714-000-007AV AR-15 Barrel Nut Wrench, 4A30H43 � �$ 35.99#714-000-020AV AR-15 Armorer’s Barrel Nut Wrench,

4A36L92 � � � � � � � � � � � � � � � � � � � � � � � � � � � 59.99#714-000-008AV AR-10 Barrel Nut Wrench, 4A21Q18 � � 29.99#100-010-967AV DPMS/KAC .308 Barrel Nut Wrench,

4A25F38� � � � � � � � � � � � � � � � � � � � � � � � � � � � 34.99

PRECISION REFLEX AR-15/M16/AR-10®

BARREL NUT WRENCH

Two models install or remove AR-15/AR-10 barrel extensions safely and easily without making a “wrench” from an old bolt head. Machined, hardened, steel engagement teeth fully engage locking lugs for precise fit; alignment sleeve holds wrench square with barrel, prevents slipping or damage. 3/4" hex drive gives plenty of leverage to get really tight extensions loose. abSPECS: 8620 steel, blue. 27/8" (7.3cm) long. Heat treated to Rc 48-52.

SOUTH SHORE AR-15/AR-10

BARREL EXTENSION WRENCHPlenty Of Strength To Get Even The

Tightest Barrels Loose

#841-015-001AV AR-15 Barrel Ext. Wrench, 1D46K08 � �$ 73.99#841-000-001AV AR-10 Barrel Ext. Wrench, 1D56C85 � � 87.99

Set the dial handle to desired torque; wrench “clicks” when the number is reached. The right tool for AR-15/M16 barrel nuts, bolt carrier key, or action screws on any rifle.SPECS: Chrome-plated steel. 1/2" (12.7mm) drive. 171/8" (43.5cm) long. 1" (2.5cm) diameter handle. 30 - 150 foot pound range.

½" TORQUE WRENCH

For Barrel Nuts & Any Bolts You Want Precisely Tight

#018-150-050AV 1/2" Torque Wrench, 4B61G14 � � � � � � � �$ 80.17

Big, tough, polyethylene block gives fitted support for installing/removing the front sight assembly on mil-spec,

AR-15 rifles and carbines. Precision-machined and clearly marked on both sides for driving the mounting pins “IN” or “OUT” of the sight. Accommodates the sling swivel, plus, includes provisions for re-moving the gas tube roll pin. The Front Sight Housing Maintenance Kit includes the front sight bench block, a taper pin starter punch for removing and installing the factory front sight housing, plus an AR-15 sight wrench for easy sight adjustments. abSPECS: Polyethylene, orange. 4" (10.2cm) dia. x 111/16" (4.3cm) high.

AR-15/M16

FRONT SIGHT BENCH BLOCKTwo Working Sides For Installation & Removal

#080-000-252AV AR-15 Front Sight Bench Block, 8D33J18 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 38.71

#080-001-156AV Front Sight Housing Maintenance Kit , 8K58K55 � � � � � � � � � � � � � � � � � � � � � � � � � � � 76.99

AR

-15/M

16


brownells.com

QUESTIONS BEFORE YOU BUY? Ask Our Full-Time Tech Staff

One-piece, molded polymer stand securely supports the lower receiver for cleaning, maintenance or storage. Base has a small footprint and clamps to your workbench, while the top fits in the magwell of any AR-15

pattern rifle. Grooves in both sides of insert accept the mag catch to lock your rifle on the block. Can also be used as a wall mount for your rifle. AR-308 fits rifles that use SR-25 pattern magazines. abSPECS: Molded, glass-filled resin, black. Permanent installation requires four 1/4" bolts or screws, not included.

ERGO GRIPS AR-15/M16/AR-STYLE .308

SPIKE’S BLOCKProvides A Stable Cleaning/Work

Platform On Your Workbench

#573-000-063AV AR-15 Spike’s Block, 3G18E43 � � � � � � � $ 24.00#573-000-088AV AR-308 Spike's Block, 3G18C43 � � � � � 24.00

Machined from tough, long-wearing nylon to hold upper re-ceiver in a bench vise without fear of crushing, marking or scratching the finish. Fits inside stripped or barreled, carry handle and flattop receivers with .250" diameter pivot pins. Holds receivers at any angle for cleaning, or fitting sights and accessories. Models to fit standard AR-15 and DPMS AR-style .308 receivers. abSPECS: Nylon, white. AR-15 -7" (17.8cm) long, 13/4" (4.5cm) wide, 27/8" (7.3cm) high. DPMS .308 - 73/8" (18.7cm) long, 17/8" (4.8cm) wide, 3" (7.6cm) high. Fits DPMS Panther AR-style .308 receivers.

DPMS AR-15/AR-STYLE .308

UPPER RECEIVER BLOCKSecure Support For Receiver

While Fitting Parts

#231-000-157AV AR-15 Upper Rcvr Block, 1C34E70 � � � $ 49.99#231-000-240AV DPMS .308 Upper Receiver Block,

1C59G49 � � � � � � � � � � � � � � � � � � � � � � � � � � 69.99

The Barrel Extension Vise (BEV) block securely supports the rifle for installing barrel nuts, attaching muzzle devices, and other assembly/maintenance operations. The BEV block mounts securely in your bench vise and fits snugly in the mag well to support the lower receiver during maintenance. For upper receiver work, the BEV’s steel lugs engage the barrel extension at the front, while a post at the rear engages the bolt carrier to provide full-length support, without unwanted flexing, during barrel installation. Included pin helps keep the upper in the proper position. The hardness of the for-ward lugs’ steel is optimized for durability, yet won’t damage the bar-rel extension. Magpul’s heavy-duty reinforced polymer is used for other engagement surfaces to protect the aluminum receiver. ab

MAGPUL AR-15/M16

BEVTM BLOCKSuper-Secure Support Of Upper & Lower

Receivers For Maintenance Work

#100-015-280AV Bev Block, 9Z41H10 � � � � � � � � � � � � � � � � �$ 47.45

UPPER RECEIVER ACTION BLOCK - High pressure, solvent resistant, struc-tural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you tightly clamp an A1/A2 carry handle receiver or flattop receiver in a large bench vise for barrel removal/installa-tion. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiv-er. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish.SPECS: Injection-molded Rynite, black. Fits A1, A2, and standard flattop receivers. Block - 2.5" (6.3cm) thick, 3.5" (8.8cm) wide, 4.5" (11.4cm) high. Insert - 8" (20cm) long, 1" (2.5cm) diameter. Torque tested to 200 ft. lbs.#080-000-661AV Upper Rec'r Action Block, 8K34K99 � � $ 42.99

LOWER RECEIVER VISE BLOCK - Heavy-duty vise block takes all the clamping force, so your expensive lower receiver won’t get scratched, distorted, or oth-erwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assem-bly, disassembly, cleaning, or repair. Will not mar or scratch weapon’s finish. AR-15/M16 model fits mil-spec .223/5.56mm rifles and carbines. Dual-purpose design can be inserted into mag well from bottom or, when upper receiver is removed, from the top. AR-Style .308 model is a dou-ble-ended design to fit ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308, and Remington R-25. Does not fit Rock River Arms lower receivers. Machined from rugged, durable, chemical-resistant Delrin® polymer.SPECS: AR-15/M16 – Injection-molded high-density urethane plastic, black. 5" (12cm) high, 2¼" (5.7cm) wide, ¾" (1.9cm) thick. Fits mil-spec .223/5.56mm rifles and carbines. AR-Style .308 – Machined Delrin, white. 51/8" (13cm) high, 3" (7.6cm) wide, 1" (2.5cm) thick. Fits most AR-Style .308 rifles except Rock River Arms.#080-000-662AV Lower Rec'r Vise Block, 8K18I74 � � � � � $ 24.99#080-000-659AV AR-15/M16 Action Block/Vise Block

Set, 8K44N99 � � � � � � � � � � � � � � � � � � � � � 59.99#080-000-494AV AR-Style .308 Lower Rec’r Vise Block,

8K35N88 � � � � � � � � � � � � � � � � � � � � � � � � � � 45.99

Heavy-duty blocks allow you to firmly clamp AR-15/M16 re-ceiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Made of dense polymer that absorbs the clamping force, yet is incapable of scratching or marring the receiver’s finish. ab


RECEIVER BLOCKSProtects Receiver From Damage When Clamping

Cold-rolled steel lapping tool chucks into a 3/8" hand drill to easily “square” the upper receiver face on your AR-15. Helps ensure precise mating of barrel and receiver for added accuracy. Coat face of receiver with aluminum-oxide lapping compound; extra long pilot slides into the bolt carrier tunnel to maintain perfect concentricity with the receiver. abSPECS: Cold-rolled steel, in-the-white. 81/4" (21cm) long, 3/8" (9.5mm) diameter shank.

AR-15/M16

UPPER RECEIVER LAPPING TOOLHelps True The Upper

Receiver For Precise Barrel Fit & Maximum Accuracy

#080-000-182AV AR-15 Lapping Tool, 8K26Q24 � � � � � � $ 34.99

Kit contains the fixtures, guides and drill bits required to complete final ma-chining on 80% AR-15 lowers. Plates and templates screw to-gether to give accu-rate precise geometry for properly drilling the required holes and clearances. Includes instructions. ab


80% LOWER RECEIVER JIGHelps You Complete 80% Lower Receiver

#100-016-684AV 80% Lower Receiver Jig, 8Z76E92 � �$ 112.99

GU

NSM

ITH

ING

TO

OLS

This bench block is is specifi-cally designed for to retain the up-per receiver, lower, front sight, and charging handle for assembly/dis-assembly and maintenance. Made of super-durable, non-marring,

reinforced molded urethane so it provides excellent support while you work AND pro-tects the finish of the firearm from scrapes and scuffs. Plenty of handy notches, grooves, and holes on both sides to temporarily retain

small parts. Just darned handy to have on the bench.

WHEELER AR-15/M16/AR-308

AR ARMORER'S BLOCKKeeps the Upper/Lower in Place

While You Work

#100-032-911AV AR Armorer's Block, 7A34I81 � � � � � � � � � $ 37.99

Extra size and weight helps keep these blocks where you put them and the big face eliminates much of the “balancing act” when you’re driving pins. Cannot mar even the most highly polished surface. Drilled with four through holes for easy pin removal and disassembly. Convenient, center “V” holds cylindrically shaped parts steady so they won’t roll. Can be drilled or modified with hand tools; will not melt when machined. abSPECS: Polyethylene, green. 4" (10cm) diameter, 11/8" (2.8cm) high.

EXTRA-LARGE BENCH BLOCKLarge, 4" Diameter, Useable Surface

Will Not Embed Or Mar

#080-000-492AV Rifle Bench Block, Green, 8D17C96 � � $ 19.99

Hardened, drill-rod steel shaft depresses the elevation spring to ease installation or removal of the rear sight elevation spring retain-ing pin. Hand-filling plastic handle ensures a firm, comfortable grip while applying pressure to the spring. abSPECS: Steel shank, in-the-white; plastic handle, black. 4" (10.2cm) OAL, .250" (6mm) O.D.

AR-15/M16

REAR SIGHT ELEVATION SPRING TOOLEases Installation &

Removal Of Rear Sight Elevation Spring

#080-000-079AV AR-15 Rear Sight Elevation Spring Tool, 8K7Q52 � � � � � � � � � � � � � � � � � � � � � � $ 10.99

Even tho’ you’re supposed to be able to adjust these sights with nothing more than a round of ammo, folks who’ve tried know it’s just not that simple. This decidedly handy little Sight Wrench does the job, quick and easy. abSPECS: 13/8" (3.5cm) long x 3/4" (19.0mm) dia. Blued steel. Models for A1, five-prong (adjusts front and rear) and A2, four-prong.

Models For A1 & A2 Make Sight Adjusting Quick & Easy

#078-015-001AV A1 Sight Wrench, 7B8G46 � � � � � � � � � � �$ 10.99#078-015-002AV A2 Sight Wrench, 8G9E76 � � � � � � � � � � � 10.99

AR-15/M16 SIGHT WRENCH

Precision machined from tough, stressproof steel with square-profile fingers that grip the sight notches firmly and won’t “roll out”; provides easy, exact sight adjustment. Plus, they resist bending and breaking to give years of service. Deeply drilled body fits both issue and tall blade sights. An extra-nice touch are the hex-shaped bodies; they’re easy to grasp, easy to turn and won’t roll off your bench. Three

tools: A1 five-prong and A2 four-prong fit front and rear sights. A1/A2 is double ended to fit both five-detent A1 and four-detent, square blade, A2 front sights only. A2 wrenches also fit FN SCAR. abSPECS: Stressproof steel, blue finish. A1: five-prong and A2: four-prong (adjusts front and rear). 13/8" (3.5cm) long x 3/4" (19mm) dia. A1/A2: 21/2" (6.4cm) long four-prong/five-prong front only wrench.

Two Styles, For A1 & A2, Give Fast, Convenient Sight Adjustment

#078-000-008AV A1 AR-15 Sight Wrench, 8G13P49 � � � �$ 15.99#078-000-009AV A2 AR-15 Sight Wrench, 8K14F39 � � � � � 17.99#078-000-010AV A1/A2 AR-15 Sight Wrench, 8G15A62 � � 19.99

AR-15 SIGHT WRENCH

This latest edition of the Easy Jig is engineered to be both easy to use (hence the name) AND precise, so every 80% lower completed on it fits and functions properly. No holes drilled off-axis and ruined lowers! Heavy-duty ¾" thick steel side plates hold the lower securely, while a self-centering mechanism ensures even exotic lower receiver designs will fit in the jig. To use the Easy Jig, you need only a hand drill and a router. No need to disassemble any part of the jig to insert or remove the lower. Built-in depth gauges mean no separate measuring tools are re-quired, and going from an AR-15 lower to AR- 308 is done simply by flipping the rear buffer tube mount and side plates. Downward force on the end mill can’t separate the press taper chuck, and you move the router by hand rather than moving the jig. Even cleanup is easy, due to the integral vacuum cleaner hose attachment to remove the chips while you work. Due to its robust construction, the Easy Jig 2 will last as long as you continue build ARs with 80% lowers. Multi-Platform model works on AR-15, AR-9 (pistol caliber), and DPMS Gen 1 pattern .AR-308 lowers. Universal AR-15 is for AR-15 and AR-9 lowers. (Cannot be retrofitted for AR-308 lowers.) Cutting Tool Kit contains 3/8", 21/64" and 5/32" drill bits, plus a 5/16" solid carbide end mill with 1/4" shank, necessary to complete most 80% lower receivers. ab

Makes Finishing 80% Lowers Fast, Easy & Precise

#100-033-187AV Easy Jig Gen2 Multi-Platform, 1H205F70 � � � � � � � � � � � � � � � � � � � � � � � $ 239.99

#100-033-188AV Easy Jig Gen2 Univ. AR-15, 1H157A86 � � 169.99#100-027-578AV Easy Jig Gen2 Tool Kit, 1H41M36 � � 49.99

80 PERCENT ARMS AR-15

EASY JIG GEN 2

AR

-15

/M16


SINCE 1939

GU

NSM

ITH

ING

TO

OLS

Whether you're building a new AR, revamping an old favorite,

or just need support for cleaning one, this vise gives you a solid work platform. It can

hold a fully assembled rifle, one broken open a the pivot pin, or even just the lower receiver itself. The vise's integral magwell insert (for guns with magwells for standard, mil-spec AR-15/M16 magazines) securely engages the lower receiver and locks it down while you work on it. Angle can be adjusted for advan-tageous positioning the part of the receiver

your working on. Front support with tapered profile is angle ad-justable, too, allowing a barrel or a handguard to be secured. Both front and rear supports have multiple positions in the base and are reversible to give you plenty of versatility. Magwell insert includes a hammer stop, and there's a bolt service station that secures the bolt face for disassembly/assembly. Base is constructed of rigid steel with non-slip rubber feet that can be removed for permanent bench-top mounting. Cutouts in the base keep small parts or tools from rolling away. Not compatible with .22 LR rifles, AR-308, or pis-tol caliber conversions that use narrow "stick" or pistol magazines.

WHEELER ENGINEERING

AR-15 ARMORER'S VISE

#100-032-912AV AR Armorer's Vise, 7A45E96 � � � � � � � � � $ 49.99

Secure Support for Your Rifle While You Work on It

Handy add-on part that clamps to the Tipton Best Gun Vise (#100-012-229, sold separately), this vise block slides into the magazine well of an AR-15 rifle/carbine/pistol and supports it se-curely for cleaning or light gunsmithing. Center section rotates 180° in 7° increments and locks into place where you want it so the gun is easy to work on. Works with the breech or closed, and locks bolt in for servicing extractor pin. Built-in hammer stop prevents damage to lower receiver. Rugged, solvent-resistant, non-marring hard polymer construction. Can also be mounted directly to their bench top with the included fasteners.


MAGWELL INSERT FOR TIPTON GUN VISE

Supports Rifle By the Magwell for Maintenance & Cleaning

#100-032-919AV AR-15 Magwell Vise Block for Tipton Gun Vise, 7A15Q99 � � � � � � � � � � � � � � � � � $ 17.49

Sturdy steel rod slips into the upper receiver to give needed support for barrel changes and parts installation. Makes removal and installation of barrels, flash suppressors, gas blocks, and handguards much easier. Designed to be gripped in a bench vise so that the rod is either horizontal or vertical. The upper receiver is then slid onto the rod and the rod’s integral splines enter the barrel extension and secure the barrel extension from turning, allowing all the torque from barrel nut wrenches to go directly into the barrel extension. Unique design can’t mar the barrel’s exterior finish and eliminates the need to remove sights or optics when installing the barrel on the upper receiver. abSPECS: 4140 steel. 11½" (29 cm) long, .995" (25.3 cm) O.D., .745"(18.94 cm) across the flats.

GEISSLE AUTOMATICS AR-15/M16

REACTION RODSecures Receiver &

Barrel For Assembly & Maintenance

#100-011-315AV Reaction Rod, 7B85F80 � � � � � � � � � � � � $ 93.99

Massive aluminum jaws lined with space age, polyurethane elastomer, grip tight and prevent marring. Two grooves fit standard and heavy barrel contours. ab

SPECS: Machined aluminum with permanently bonded green polyure-thane elastomer lining. 5" (12.7cm) wide, 1" (2.5cm) thick, 37/8" (9.8cm) long. 2 lb. 6 oz. (1 kg) wt. Fits 4" and wider vises.

AR-15/M16

ACCU-GRIP BARREL VISE JAWSFully-Lined Barrel Grooves Prevent

Slipping & Damage

#852-015-000AV Accu-Grip Vise Jaws, 2E92L31 � � � � � $ 126.99

Originally developed by the JP cus-tom shop for in-house use, these ma-chined aluminum blocks allow the user to hold a flattop upper securely for barrel, handguard, and muzzle brake installations. Both pieces have imbedded magnets to hold them to the vise jaws and feature cut outs for the top rail and the pivot pin lug to ensure a rock-solid, no-slip grip. Special “soft” anodized coating prevents jaws from marring the receiver finish. abSPECS: Aluminum with matte black, soft-anodized coating. 5" (12.7 cm) long, 7/8" (2.2 cm) & 13/16" (3 cm) wide, 11/2" (3.8 cm) high. Fits flattop re-ceivers only.


UNIVERSAL VISE CLAMPSSecurely Holds The Upper While

You Do Other Work

#452-000-155AV Universal Vise Clamps, 2E68I57 � � � � � �$ 79.95

Heavy duty, machined alu-minum vise block lets you clamp an AR-15/M16 upper receiver in a bench vise without risk of marring the finish or distorting the receiver from over-tightening. Dual-use design allows the receiver to be po-sitioned top side up or, if it’s a flattop, upside down; either way, the vise grasps the block and never touches the receiver. One side of the block fits in the underside of the receiver and is held securely in place with two, steel, T-pins inserted through the takedown pin holes, so you can install optics, perform thorough cleaning, and do other work on the exterior. Or, slide a flattop receiver rail into the grooves on the other side of the block and tighten the locking bar with the large thumbscrew to hold the receiver upside down for easy access to the underside. abSPECS: Body - Aluminum, hardcoat anodized, matte black. 7" (17.8cm) long, 11/4" (3.2cm) wide, 11/4" high. Pins – Steel, black oxide finish. Fits AR-15/M16/M4 and clones with .250" diameter takedown pin holes.

PRECISION REFLEX AR-15/M16

UPPER RECEIVER VISE BLOCKTwo Ways To Support Upper Receiver In A Vise Without

Risk Of Damage

#714-000-006AV Upper Receiver Vise Block, 4A47L14 � � $ 57.99

Machined aluminum insert attaches to just about any AR

upper receiver - AR-15, M4, M16, AR-308 – by engaging the pivot/takedown pin holes so it can be clamped in a bench vise. Will also attach to an Picatinny rail on a standard flattop, high-rise rail, or many other integrated accessory rails by sliding onto and clamping the rail. Block is machined to precise tolerances to ensure a secure, slop-free hold essential for tasks like removal/installation of stub-born barrel nuts, installing optics, gas tube work, and similar tasks.

WHEELER ENGINEERING AR-15/M16/AR-308

UPPER RECEIVER/PICATINNY RAIL VISE BLOCKProvides a Solid Clamping

Surface for Holding an Upper in Bencfh Vise

#100-032-920AV Upper Rec'r Vise Block, 7A33Q95 � � � � �$ 37.99

Handy tool of extremely tough, non-marring glass-reinforced nylon is perfect for prying and push-ing applications where a metal tool can damage the part or gun finish. Rigid chisel point on one end is use-ful for depressing springs and spring-loaded parts—even use to thread MOLLE straps through webbing—while the semi-flexible flat blade on the other end can get into tight spots or serve as a temporary shim. Great to have around during disassembly of semi-auto pistols like the 1911, Glock, or Smith & Wesson M&P or when working on service rifles like the AR-15/M16. Multiple ridges molded into the grasping area in the middle of the tool help prevent slippage when working with oily or greasy hands. abSPECS: Glass reinforced nylon, Black, Flat Dark Earth, or Foliage Green. Approximately 5" (12.7cm) long, 1/4" (6.4mm) diameter.

10-8 PERFORMANCE

ARMORER TOOLSturdy Non-Marring Tool Has Dozens Of Uses

#100-003-708AV Armorer’s Tool, Black, 1B7L34 � � � � � � � �$ 10.99#100-003-709AV Armorer’s Tool, FDE, 1B10B15 � � � � � � � � 11.99

Convenient multi-function pocket tool con-

tains six separate tools to perform on-the-spot field stripping and critical cleaning and maintenance functions on the AR-15/M16/M4 weapon platform. The eFECT (Field Expedient Cleaning Tool) includes a flat blade screwdriver, pin punch, nylon bristle brush, angled pick, bolt carrier carbon scraper, and a sight adjustment tool that fits both A1 and A2 front sights. Exclusive, dual Wedge Lock holds tools in the open position, and they cannot be released until the wedge is pulled back. Removable angled pick can be replaced with any Otis cleaning accessory with 8-32 tpi female thread. Stores in the included MOLLE- compatible belt sheath or the internal com-partment of an A2 buttstock. abSPECS: Machined stainless steel and molded reinforced polymer, matte black. 33/8" (8.6cm) closed length, 81/2" (21.5cm) open length, 1" (2.5cm) wide. 4 oz. (113g) weight. Includes nylon, digital camo MOLLE-compatible sheath and illustrated instructions.

GERBER AR-15/M16

“EFECT” MILITARY MAINTENANCE TOOL

Compact, Multi-Function Tool Makes

Field Cleaning, Repairs & Adjustment Easy

#100-004-875AV eFECT Tool, 8A92D49 � � � � � � � � � � � � � $ 104.99

Multi-function tool comes with mis-sion-critical implements including an AR-15/M4/M16 A2-style front-sight post adjustment tool. There’s a carbon scraper keeping bolt and carrier clean and ready for action. Easily operated with just one hand, the versatile 600 also has carbide wire cutters, an extended-reach Philips screw-driver, standard screwdriver, serrated knife,

3" ruler, needlenose pliers with crimper jaws, and a can/bottle open-er. Unique, easy-to-use locking/unlocking mechanism ensures that tools won’t collapse during use. Includes a MOLLE/belt-compatible sheath for convenient storage. abSPECS: Stainless steel, matte black oxide finish. 51/8" (13cm) OAL. 8.3 oz. (235g) wt.

GERBER AR-15/M16

MULTI-PLIER 600 SIGHT TOOLVersatile, Multi-Tool With Front-Sight Adjustment Head Features Numerous

Mission-Critical Implements

#385-000-011AV Multi-Plier 600 Sight Tool, 5H67D93 � � $ 72.99

Versatile multi-tool is like an armorer’s kit that fits in the palm of your hand and stores in the pistol grip of your rifle, so you have it when you need it. Inside, you’ll find an array of tools for performing emergency repairs to get your AR back in action fast in combat, on the range, or in the field. There’s a flat-blade screwdriver, broken shell extractor, carbon scraper, cotter pin hook for removing firing pin from bolt, A2 front sight tool, magazine feed lip gauge, and a feed lip adjustment tool. A refillable stainless steel tube holds just enough oil for one field lube. Use the wire brush for cleaning the bolt and carrier key, or remove the brush and attach it to the pull cable for bore clean-ing using the shell extractor as a T-handle. A2 fits standard A2-type pistol grip. Twist the base to activate the compression lock system and anchor the tool securely—no movement, no rattling. Aggres-sive, molded “teeth” on the base serve as an emergency strike plate during hand-to-hand combat. Teeth are designed to create painful pressure points on impact, but won’t snag on your gear during ordi-nary activity. Available packaged with a Hogue Monogrip® A2-style pistol grip. Rigid fiberglass core is “overmolded” with non-slip rub-ber with palm swells and finger grooves to reduce shock, improve comfort, and aid in positive weapon control. MOE fits inside Magpul MOE® pistol grip and has same tools as above, without the strike plate; sold alone or in a kit with a black MOE pistol grip included. abSPECS: Stainless steel and reinforced molded polymer. A2 fits in standard A2 pistol grip and similar grips with same-size cavity. Available alone or with Hogue Monogrip rubber-covered, fiberglass-cored pistol grip, black. MOE fits Magpul MOE and old MIAD pistol grips only.

SAMSON MANUFACTURING CORP.

AR-15/M16 FIELD SURVIVOR TOOLIndispensable All-

In-One Tool System Stores In Pistol Grip

#100-004-235AV A2 Field Survivor Tool, Only, 1B75K99 � � � � � � � � � � � � � � � � � � � � � � � � � $ 90.24

#408-000-105AV A2 Field Survivor Tool, w/Monogrip, 8K93G31 � � � � � � � � � � � � � � � � � � � � � � � � 106.99

#100-004-951AV MOE Field Survivor Tool, Only, 1B75D99 � � � � � � � � � � � � � � � � � � � � � � � � 90.24

#100-007-040AV MOE FS Tool, w/MOE Grip, 8K90L36 � � � � � � � � � � � � � � � � � � � � � � � � 109.99

Innovative two-piece split die quickly and easily repairs dam-aged threads. Simply place the two pieces of the die together on the good threads above or below the damaged area, then turn the die to recut the threads. Upper Receiver Die fits the 1 1/4-18" thread on the AR-15 upper receiver. Recoil Buffer Tube Die is made for the 1 13/16-16" thread on the AR-15 buffer tube. abSPECS: Steel.

JME INNOVATIONS AR-15

RETHREADING DIESCleans Up Rough Or Damaged Threads

#100-016-682AV Upper Rec'r Die 1 1/4-18", 6A46K14 � � $ 64.99#100-016-681AV Buffer Tube Die 1 13/16-16", 6A46G14� � 64.99

AR

-15/M

16


brownells.com

NATO maximum length headspace gauge used to make sure the chamber does not have excessive headspace. With this gauge in the chamber, the bolt should not close. Type of gauge used by the Colt factory to measure maximum acceptable headspace. Also essential for checking well-used guns or those that have been rebarreled. abSPECS: Hardened and ground steel. 1.65" (4.2cm) overall (this is NOT the “headspace” dimension). .3655" (9.3mm) diameter.

5.56MM/.223 HEADSPACE GAUGEFactory Specified Size Measures M16/AR-15 Maximum Headspace

#319-418-033AV 5.56 Headspace Gauge, 8K27G27� � � � �$ 30.99

Covers every size chamber all the way from Go to Field. Perfect for match shooters, armorers, or sportsmen looking for the most accurate way to track locking lug and chamber wear on high quality, match grade barrels. abSPECS: Individual high speed steel gauges, hardened and ground. .308 Match Gauge Kit contains 1 of each .308 size listed in table, packaged in plastic case. NOTE: Some .308/7.62 gauges will be marked “.243”.

In .001" Increments For Measurement Of “Match

Grade” Chambers

/FORSTER

MATCH RIFLE HEADSPACE GAUGES

#079-308-000AV .308 Match Gauge Kit, 9A227P60 � � � $ 249.99

STOCK # CALIBER SIZE TYPE#319-223-464AV .223 Rem/5.56 NATO 1.4636" GO#319-223-467AV .223 Rem/5.56 NATO 1.4666" NO-GO#319-223-470AV .223 Rem/5.56 NATO 1.4696" FIELD#319-308-630AV .243 Winchester 1.630" GO#319-308-631AV .308 Win/7.62 NATO 1.631" Match#319-308-632AV .308 Win/7.62 NATO 1.632" Match#319-308-634AV .243 Winchester 1.634" NO-GO#319-308-638AV .243 Winchester 1.638" FIELD

— Advise # — Forster Headspace Gauge, 9A25E71 � � � � $ 30.99— Advise # — Match Gauge, 9A24G83 � � � � � � � � � � � � � � � 26.99

Headspace gauges in .001" increments from 1.4636" to 1.4736" cover everything from Go to Field, including No-Go. Checks both .223 Remington commercial chambers and 5.56mm NATO chambers. Hard-ened steel, precision ground to SAAMI’s ANSI tolerances. Includes polypropylene storage case. abSPECS: Hardened steel. 11 gauges in .001" increments from 1.4636" to 1.4736". For 223/5.56mm NATO only.

FORSTER

.223/5.56MM MATCH RIFLE HEADSPACE GAUGE SET

11 Separate Gauges For Checking Chambers

#319-000-008AV .223/5.56 Match Headspace Gauge Set, 9A175Q42 � � � � � � � � � � � � � � � � � � � � $ 199.99

Gives the proper chamber headspace dimensions so you know a firearm is safe to fire. GO gauge gives the SAMMI-recommended, minimum chamber depth. NO-GO is slightly shorter than the SAMMI-recommended to give a small safety margin maximum chamber depth. ab

MANSON PRECISION - Precisely made by Dave Manson. SPECS: M7 high speed steel, in-the-white, hardened.

STK# GO STK# NO-GO CALIBER#513-100-240AV #513-100-241AV .223 Remington#513-100-260AV #513-100-261AV .308 Winchester

CLYMER - Clymer GO gauges are marked with a green band, Cly-mer NO-GO gauges are marked with a red band. SPECS: Machined Steel.

STK# CLYMER GAUGE GO

STK# CLYMER GAUGE NO-GO

CARTRIDGE

#184-100-240AV #184-100-241AV .223 Rem#184-000-035AV #184-000-036AV 5.56 NATO#100-011-283AV #100-011-311AV 300 AAC Blackout#184-100-260AV #184-100-261AV .243 Winchester

FORSTER - Long-time industry standard made to the highest qual-ity standards. SPECS: Machined Steel.

STK# FORSTER GAUGE GO

STK# FORSTER GAUGE NO-GO

CALIBER

#319-223-464AV NA .223 Rem/5.56 NATO#319-308-630AV NA .243 Winchester

NA #319-223-467AV .223 Rem/5.56 NATONA #319-308-634AV .243 Winchester

— Advise # — Forster Headspace Gauge, 9A25E71 � � � � �$ 30.99

HEADSPACE GAUGESEssential For Safe

Chambering

— Advise # — Manson Headspace Ga., 3A35D00 � � � � � $ 35.00— Advise # — Clymer Headspace Ga., 4H33N00 � � � � � � 33.00— Advise # — Forster Headspace Ga., 9A25E71 � � � � � � � 30.99

— Advise # — Manson Headspace Ga., 3A35D00 � � � � � �$ 35.00— Advise # — Clymer Headspace Ga., 4H33N00 � � � � � � � 33.00— Advise # — Forster Headspace Ga., 9A25E71 � � � � � � � � 30.99

Manufactured to exact specifications, including diameter and length dimensions, weight and balance of factory loaded ammo, these DUMMIES have the proper functioning characteristics to reli-ably check magazine feeding, action timing, extraction and ejection of all guns. The only professionally accepted and safe way to check gun functioning; live ammo should never be used except in actual test-firing on the range - after you have checked the gun with DUM-MIES. The very reasonable cost per DUMMY is an added incentive to use them regularly. The blackened case makes them distinct, and instantly recognizable as DUMMIES, which makes them ideal - and safe - to use as a sales aid. Especially useful when demonstrating how a particular gun functions or in gun safety instruction classes. They absolutely eliminate the chance of an accidental discharge. ab

ACTION PROVING DUMMIESInert, Factory Spec Dummies Give Safe

Function Testing

STOCK # PER CALIBER PRICE#367-223-005AV 5 .223 Rem. 7F11C31 $ 13.99#367-223-020AV 20 .223 Rem. 7F37B60 $ 44.99#669-308-005AV 5 .308 Win. 7F11L88 $ 18.99#669-308-020AV 20 .308 Win. 7F46Q26 $ 65.99

CENTERFIRE RIFLE DUMMIES

GU

NSM

ITH

ING

TO

OLS

A must when threading custom barrels or chasing threads on standard barrels. Use to make custom suppressors or clean up exist-ing factory threads. Custom-made to factory specs. Dies available in circular adjustable profile or hex profile. SPECS: ½"-28 tpi cuts threads for AR-15/M16. 5/8"-24 tpi cut threads for AR-style .308. Taps - High-speed steel (HSS). Dies available in standard (Std) circular profile, made of high-speed steel (HSS), or in Hex profile, made of hardened carbon steel (CS). “OD” of hex dies is measured across flats.

AR-15/AR-STYLE .308

FLASH SUPPRESSOR TAP & DIE

Accurately Thread Custom Barrels Or Recondition Damaged Threads

#080-598-528AV 1/2"-28 tpi Flash Supp Tap, 7C12K31 � � �$ 19.99#080-598-529AV 1/2"-28 tpi Flash Supp Die, Std/1" OD,

7C16D74 � � � � � � � � � � � � � � � � � � � � � � � � � � � 20.99#081-598-100AV 1/2"-28 tpi Flash Supp Die, Hex/1" OD,

7C20C49 � � � � � � � � � � � � � � � � � � � � � � � � � � � 29.99#080-598-531AV 5/8"-24 tpi Flash Supp Tap, 8K16E76 � � � 24.99#080-598-530AV 5/8"-24 tpi Thread Cutting Die, Std/1½"

OD, 5F21L93 � � � � � � � � � � � � � � � � � � � � � � � 25.99#081-598-101AV 5/8"-24 tpi Flash Supp Die, Hex/1¼"

OD, 7C20N37 � � � � � � � � � � � � � � � � � � � � � � 23.99

Hex Die

Chases and cleans the most important threads on the AR-15/M16 receivers. 1¼"-18 tpi corrects out-of-spec or cross-threaded upper receivers and barrel nuts. 13/16"-16 tpi makes receiver exten-sion (recoil buffer) tube and lower receiver threads uniform for easy installation. abSPECS: Taps - High-speed steel (HSS). Dies available in standard (Std) circular profile, made of high-speed steel (HSS), or in Hex profile, made of hardened carbon steel (CS). 2-1⁄2" (6.3cm) “OD” of hex dies is measured across flats.

Uniforms Threads For Easy Installation Of Receiver Extension

& Barrel Nut

#080-598-125AV 1¼"-18 tpi Tap, 7C52G70 � � � � � � � � � � � $ 59.99#080-598-126AV 1¼"-18 tpi Std Die, 8K45L11 � � � � � � � � � 59.99#081-598-103AV 1¼"-18 tpi Hex Die, 7C31H48 � � � � � � � 39.99#081-598-104AV 1¼"-18 tpi Adjust Rnd Die, 7C65Q26 � � 75.99#080-598-180AV 13/16"-16 tpi Tap, 7C52P39 � � � � � � � � � � � 59.99#080-598-181AV 13/16"-16 tpi Std Die, 7C65M26 � � � � � � � 75.99#081-598-102AV 13/16"-16 tpi Hex Die, 7C30E53 � � � � � � � 35.99

AR-15/M16

RECEIVER TAPS & DIES

This handy tap and die kit from Brownell’s allows you to cut or restore 1/2"-28 threads. Tap is made from high speed steel and is ideal for cleaning the threads on your flash hider, muzzle brake, or compensator. Innovative split die allows you to start the die on clean barrel threads, and work your way over the damaged areas. Die is made from A-2 tool steel, and are heat treated for extra strength and durability. abSPECS: Fits 1/2"-28 threads. Tap - High speed steel. Die - A-2 tool steel.

BARREL THREAD RESTORATION KITRepair Damaged Threads

Or Makes New Ones

#080-001-158AV Bbl Thread Restoration Kit, 8K39K99 � � $ 54.99

Convenient kits contain “Go” and “No-Go” gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe cham-ber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case. abSPECS: Steel, precision machined to SAAMI specs. Each set contains one go gauge and one no-go gauge in a single caliber as listed below.

CLYMER AR-15/M16/AR-STYLE .308

GO/NO-GO GAUGE SETSHeadspace Gauge Sets In Popular

AR Calibers

#184-000-037AV .223 Rem. Headspace Gauge Kit, 4H66F00 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 66.00

#184-000-038AV .308 Win. Headspace Gauge Kit, 4H58E00 � � � � � � � � � � � � � � � � � � � � � � � � � � 58.00

#184-000-039AV 7.62 x 39 Headspace Gauge Kit, 4H58Q00 � � � � � � � � � � � � � � � � � � � � � � � � � 58.00

#184-000-042AV 9mm Luger Headspace Gauge Kit, 4H60K00 � � � � � � � � � � � � � � � � � � � � � � � � � � 60.00

MANSON PRECISION - Ground from M-7 steel by one of the most respected names in the industry. Made to SAAMI specs with an integral throater and fixed pilot.SPECS: M7 High speed steel, in-the-white. Solid pilot, six, straight flutes, right-hand cut. 3/8" (9.5mm) square drive shank.

STK# FINISH STK# ROUGH CALIBER PRICE#513-050-120AV NA .223 Remington $ 136.99#513-050-400AV NA .308 Winchester $ 123.99

NA #513-050-401AV .308 Winchester $ 136.99

CLYMER - Made from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith.SPECS: Six, right-hand cutting, straight flutes. Solid pilot, integral throat. 7/16" round shank with 3/8" square drive.

STK# FINISHER STK# ROUGHER CALIBER FITS PRICE#184-050-004AV NA 5.56 NATO 5.56 NATO $ 105.27#184-050-120AV NA .223 Rem. .223 Remington $ 105.09#184-050-400AV #184-050-401AV .308 Win. .308 Winchester $ 105.33

NA #184-050-101AV .223 Rem. .223 Remington $ 105.33

CHAMBERING REAMERS

Top Brands Cut Precise Chambers For Superb Accuracy

ab

ab

High-quality finish reamer and precision made headspace gauges make easy work when chambering a new barrel. Precision machined from high-quality steel for a lifetime of service when properly cared for. Finish reamers can be used in your lathe or hand-turned; perfect for fitting short chambered barrels. Includes head-space gauge to accurately measure chamber size and ensure a tight, safe chamber. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Made to SAAMI specs. abSPECS: Reamer - M7 high speed steel, in-the-white. Right-hand cutting, six flutes. Solid pilot, integral throat. 7/16" round shank with 3/8" square drive. Headspace Gauge - Steel, in-the-white.

CLYMER

.223 & .308 CHAMBER REAMING KITSComplete Kits For

Safe, Accurate Chambering

#184-000-043AV .223 Chmbr Reaming Kit, 4H163H00 � �$ 163.00#184-000-044AV .308 Chmbr Reaming Kit, 4H163Q00 � � 163.00


SINCE 1939

AR

-15

/M16

GU

NSM

ITH

ING

TO

OLS

Case head separation from over-fired or out of spec brass won’t ruin your shooting experi-

ence if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-type or any other firearm chambered for the .223/5.56 NATO or .308/7.62 NATO cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor. abSPECS: Steel, blue. Models for .223 Remington/5.56 NATO or .308 Win-chester/7.62 NATO cartridges.

BROKEN SHELL EXTRACTOR

#080-000-441AV .223 Broken Shell Ext., 8K15H66 � � � � � �$ 19.99#080-000-530AV .308 Broken Shell Ext., 8K20F08 � � � � � � 22.99

Easily Removes Broken Cases Without Field Stripping

Don’t let case head separation take you out of the fight or put an end to your range time. Simple, reliable tool quickly and easily removes a stuck case from the chamber. Make sure gun is unloaded, then insert the shell extractor in the chamber and close the action, just like you’re loading another round. The back of the tool takes the place of the missing case head, while the springy steel fingers slide through the case neck and expand to positively grab the case mouth. Manually work the action to extract the broken shell and the tool. abSPECS: Steel, blued. Models available for rifles chambered in .223/5.56mm and .308/7.62mm NATO only.

C.J. WEAPONS AR-15/M16/AR-STYLE .308

BROKEN SHELL EXTRACTORFast, No-Fuss Removal Of

Stuck Cases

#100-005-992AV .223/5.56 Broken Shell Extractor, 5K11H85 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 13.99

#100-003-126AV .308/7.62 Broken Shell Extractor, 5K7A79 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.99

Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don’t back out under the most strenuous rapid-fire conditions. Elimi-

nates the hassle of trying to stake the screws with a hammer and punch that could slip and damage the key, screws, or carrier. Holds carrier securely and positions the key so it can be dimpled in the correct locations by tightening the four hex screws on the tool. An additional retaining screw on top of the tool prevents the carrier from moving. The tip of this screw is machined flat to make sure it applies even retaining force and won’t mar the carrier. All screw tips are hardened to Rc 58-62 for durability; however, sometimes screws will break, so we offer a 4-pak of replacement screws. abSPECS: 1018 carbon steel, black oxide finish. 3" (7.62cm) long, 2" (5.1cm) wide, 2" high.

AR-15/M16

CARRIER KEY STAKING TOOLFast, Foolproof Staking Without

Damaging Key, Screws, Or Carrier

#080-000-638AV Carrier Key Staking Tool, 8K49J28 � � � $ 69.99#080-001-118AV Carrier Key Tool Repl. Screws, 4-Pak,

8K11J53 � � � � � � � � � � � � � � � � � � � � � � � � � � � 13.99

Tough, steel clamp captures the bolt head, and the large-handled turnscrew depresses the ejector so the ejector pin can be safely removed or installed from bolts with plunger-style ejectors and forward-posi-tioned locking lugs. Set includes turnscrews to fit both Standard and Small bolt faces plus separate bolt head retainers. One fits bolt bodies up to .720" diameter and the other fits AR-15/M16 bolts only. AR-15/M16 Bolt Ejector Tool also available separately. abSPECS: Steel, blued. Plastic handle. Includes instructions.

Faster Removal Of Plunger-Style Ejectors

#080-792-100AV Bolt Ejector Tool Set, 8K29A50 � � � � � � $ 35.99#080-792-002AV Bolt Ejector Tool, only, 8K17B25 � � � � � 20.99

BOLT EJECTOR TOOL

Versatile fixture lets you remove plunger-style ejectors from stan-dard .700" and .510" diameter bolts

quickly and safely without launching parts across the room. Works for a variety of popular rifles, including AR- 15, AR-style .308 rifles, Remington 700, Winchester 70, Savage, and Sako. Rugged, light-weight body machined from 6061 billet aluminum securely holds bolt while threaded, tool steel shank compresses and captures ejec-tor spring and aligns the roll pin for easy removal with a punch. Gradually loosen the shank to relieve spring tension. abSPECS: Anodized 6061 aluminum body, dark green, steel shank. 313/16" (9.7cm) long with shank fully screwed in, 21/4" (5.7cm) wide, 13/4" (4.5cm) high. Fits AR-15, AR-style .308 rifles, Remington 700, Winchester 70, Sav-age, and Sako rifles.

EJECTOR REMOVAL TOOLEliminates The “Lost Parts” Hassle

When Working On Rifle Bolts

#080-000-420AV Ejector Removal Tool, 8K53D37 � � � � � �$ 63.99

Steel tool features ergonomic plas-tic handle, and makes it easy to install and remove AR-15 trigger pins. Lets you use your palm to put pressure against the pin and helps save your fingertips. Works with all .154 trigger pins. abSPECS: Steel, .154" O.D.#100-015-134AV Trigger Fitting Pin, 7B13M93 � � � � � � � � �$ 14.99

GEISSELE AUTOMATICS AR-15/M16/AR-308

TRIGGER FITTING PINTool Makes It Easy To Install Trigger Pins

Convenient, easy-to-use tool holds the bolt assembly securely while you compress the ejector to re-move the spring pin without the risk of the ejector and ejector spring flying out and getting lost. Eliminates the “annoyance factor” of a job that seems to require three hands. The pin drops out of the way through a hole in the vise body, allowing you to slowly back off the pressure on compression screw and capture the ejector and spring. Equally helpful during reassembly. Can also be used to hold the bolt while replacing gas rings and extractor. May be clamped in a bench vise for added support. Tough, yet lightweight aluminum and stain-less steel construction for years of reliable service. abSPECS: Aluminum body, anodized, black. Stainless steel compression screw, natural finish.

SINCLAIR AR-15/M16

BOLT VISESaves Time During Bolt Disassembly &

Prevents Lost Parts

#749-003-708AV Sinclair AR-15 Bolt Vise, 8H20M03 � � �$ 23.99

Precision-machined steel tool eliminates the struggle of staking an original, M16-style front sling swivel rivet with a hammer and punch. Wide throat easily fits around the swivel and dual, screw-adjustable stakes

with large, easy-to grasp handles let you apply just the right amount of pressure to quickly and accurately expand the rivet for a neat, factory-finish job—no slips or dings. abSPECS: Frame - 1018 steel, black oxide finish. 3" (7.6cm) long, 13/4" (4.6cm) high, 1/2" (12.7mm) thick. Throat: 2" (5 cm) wide. Stakes - heat-treated 4140 steel, black oxide finish. 3" (7.6) long handles.

AR-15/M16

SLING SWIVEL STAKING TOOLMakes Installing Front Sling

Swivel Rivet Fast & Easy

#080-000-756AV Swivel Staking Tool, 8K40I44 � � � � � � � $ 49.99

Easy-to-use fixture allows full assembly and testing of any AR-15 trigger prior to installation. Aluminum angle bracket with extended length trigger pins secures trigger group to side of lower receiver. Provides a clear, unobstructed view of the sear, hammer, and disconnector engagement points while under normal spring tension. Takes the guesswork out of achieving that perfect trigger pull. Durable, Delrin® dry fire block drops into magazine well for safe test firing. Great for trigger modifications, checking adjustments before installation, or for use as an armorer’s training aid. A “must-have” for AR-15 trig-ger work. abSPECS: Bracket - Aluminum with black, protective finish. Dry Fire Block - Delrin. Fits .154" dia. pin holes. Includes instructions.

AR-15

HAMMER TRIGGER JIG W/DRY FIRE BLOCK

Takes The Guesswork Out of Fine-Tuning Your

Trigger

#080-000-070AV AR-15 Hammer Trigger Jig w/Dry Fire Block, 8K38J21 � � � � � � � � � � � � � � � � � � � � �$ 55.99

Drop-in, Delrin block helps you gain a true feeling of trigger move-ment and pull weight without sacri-ficing your thumb. Go ahead, drop the hammer; this shock-absorbing block prevents the hammer from striking the wall of the magazine well.

Helps eliminate expensive receiver damage and broken hammers. Fits into the magazine well with the upper receiver open or removed, withstands thousands of hammer strikes. abSPECS: Delrin, black. 21/8" (5.4cm) high, 3" (7.6cm) long.

AR-15

HAMMER DROP BLOCKSaves The Frame & Your Thumb

When Tuning AR-15 Triggers

#080-953-000AV AR-15 Hammer Drop Block, 8K22K17 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99

Aluminum fixture securely cradles bolt and prevents flying parts. Threaded steel shank captures and compresses ejector spring and aligns roll pin for easy removal with punch, loosens gradually to re-lieve spring tension. Works equally well for bolt assembly. Compact and light enough to take to the field. A must for all AR shooters. abSPECS: Aluminum, black anodized base. Steel shank. 4" (10.2 cm) long, 11/4" (3.2 cm) wide. 8 oz. (230 g) wt.

YOUNG MANUFACTURING AR-15/M16/AR-308

BOLT EJECTOR TOOLSafe, Effective Bolt Maintenance,

Prevents Loss Of Parts

#939-000-003AV AR-15/M16 Bolt Eject Tool, 9C43I08 � �$ 59.99#939-000-005AV AR-Style .308 Bolt Eject Tool, 9C44J62 � � 58.00

Pocket-sized tool helps prevent breaking the triggerguard tab or marring lower receiver finish when installing or re-

moving the roll pin. Tool fully supports triggerguard tab while slowly pushing the roll pin in or out of its channel. Includes steel alignment pin and push pin to aid in roll pin removal and installation. abSPECS: Aluminum body, anodized. Molded thermoplastic handle, 17/16" (3.6cm) diameter. Steel screw, push pin and alignment pin.

Eases Installation Of Triggerguard Roll Pin

#100-011-602AV Roll Pin Pusher, 3B36E67 � � � � � � � � � � � $ 39.99

LITTLE CROW GUNWORKS AR-15/M16

RPP ROLL PIN PUSHER

C-clip tool features split-lip design that lets you easily install ejection cover hinge pin clip. No more c-clips shooting across the room. Just slide c-clip into recess in the tool and snap into place. Squared handle makes it easy to grip and manipulate. ab

ROTOR CLIP AR-15/M16 EJECTION COVER HINGE PIN CLIP TOOL

#100-013-629AV Ejection Cover Hing Pin Clip Tool, 8F30A80 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 35.99

Makes It Easy To Install Ejection Cover Hinge Pin Clip

Provides an accurate, re-peatable method to achieve a crisp, clean-breaking trigger pull on AR-15 rifles with .154" diam-eter hammer and trigger pins. Included adapter attaches to a precision-ground indexing el-evator column and clamps both the hammer and sear in the cor-rect position. Adjustable to allow you to change both hammer and sear angle. Adapter is also available separately if you already own the Series II fixture. Use with Series II India or Hard Arkansas stones sold separately. abSPECS: Steel, blued, precision ground and hardened. 5" (12.7cm) 4" (10cm) high, 3" (7.6cm) wide. Fixture includes .154" adapter, ham¬mer and sear clamp, three Allen wrenches, and instructions. .154" Adapter fits AR-15/M16 with .154" dia. hammer and trigger pins.


SERIES II STONING FIXTURE

#080-815-000AV Series II India Stone, 8K17E56 � � � � � � � $ 20.99#080-815-001AV Series II Hard Arkansas Stone,

8K66I56 � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.99

Provides Precise, Controlled Stoning For A Perfect Trigger Pull


brownells.com

AR

-15/M

16

Designed to make it easier to install the gas tube and start the roll pin into the gas block. Notched nylon block offers solid support for the gas block and has three pre-drilled holes for roll pin removal. Comes with a roll pin punch. abSPECS: Nylon, white. 3" (7.6cm) long, 1" (2.5cm) high, 1" (2.5cm) wide. Punch – steel, black finish. 3¼" (8.3cm) long.

PRECISION REFLEX

GAS BLOCK ASSEMBLY FIXTURETakes The Aggrevation Out Of Installing

Gas Tube & Roll Pin

#714-000-028AV Gas Block Assy Fixture, 4A25P17� � � � � � $ 27.99

High-impact plastic tools drive out the front and rear takedown pins or help get the magazine catch out from your M16/AR-15 without scratching or marring the metal. Pushtool for the takedown pins comes in two versions: a bench model or a handy key ring model. Bench model available in black or high-visibility green so you can easily spot it in the “bench clutter.” Magcatch tool compresses the spring to make it easy to remove the magazine catch. abSPECS: High-impact plastic, black or high-visibility green.

SPORTING CONVERSIONS AR-15/M16

TAKEDOWN TOOLSRemove Takedown Pins & Mag

Catch Quickly

#100-002-125AV Bench Model Pushtool, Blk, 3A9H43 � �$ 11.99#100-011-496AV Bench Model Pushtool, Green,

3A8E31 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 9.99#100-002-126AV Key Ring Pushtool, 3A9B88 � � � � � � � � � � 11.99#100-002-127AV Magcatch Tool, 3A9Q88 � � � � � � � � � � � � � 11.99

Ingenious tool holds the tiny gas tube roll pin securely to make installation easy and fast. No more fumbling with needle nose pliers or tweezers, only to have the pin fly fly off and get lost! Pin is pressed into the tool for a rock-solid hold while the tapered tip enables pre-cise control and correct placement. Safely gets the pin partially in, so the job can be finished with a normal roll pin punch. All-steel construction, matte black oxide finish. ab


GAS BLOCK ROLL PIN TOOLFor Easy

Installation Of Gas Tube Pin

#100-011-667AV Roll Pin Tool, 7B11F21 � � � � � � � � � � � � � $ 12.50

Long available as part of our AR-15/M16 Armorer's Tool Kits, we now offer these two simple, yet indispensable, tools on their own in a handy “two-fer” kit. Use the Pivot Pin Depressor to com-press the spring-loaded detent to free the pivot pin for removal - a truly frus-

trating chore made simple with this tool. Works on all mil-spec AR-15s, except those from Colt Mfg. On the flip side, the Pivot Pin Detent Installation Tool guides the detent and spring into place and serves as a slave pin when installing the pivot pin itself. Prevents the loss of the detent ball and makes pivot pin installation easy, fast, and stress-free. Both tools are made of properly hardened, high-grade steel. ab

AR-15/M16

FRONT PIVOT PIN TOOL KITMakes Pivot Pin Removal/

Installation Fast & Easy

#080-001-159AV Front Pivot Pin Tool Set, 8K12E46 � � � �$ 14.95

Steel punches are specifically designed to remove and install the .078" roll pin that secures the gas tube into AR-15 gas blocks. One punch is tapered, and has thick shaft to make driving pin into place fast and easy. Other punch has slim section to fit down into roll pin hole, making it easy to remove rusted pins. Flats on the handle allow you to grip and control the punch. Includes two punches per set. abSPECS: Steel. 5/64" O.D.


GAS BLOCK PUNCH KITMakes It Easy To

Install & Remove Gas Tube Roll Pin

#100-015-137AV Gas Block Punch Kit, 7B21B71 � � � � � � � $ 24.99

Just place the hook on the trigger and pull. The large, easy to read LCD quickly displays the results. Strain gauge technology provides accuracy to 1/10 of an ounce from 1 oz. to 5 pounds and to 1/2 oz. from 5 to 12 pounds. Lets you take up to ten readings and display the average. Displays either English or Metric format.SPECS: Plastic case. Steel hook, 53/4" (14.6cm) long. 111/2" (29.2cm) overall. 1 oz (28.35 g) to 12 pds. (5.4 kg) range. Includes ballistic nylon storage case.

LYMAN ELECTRONIC TRIGGER PULL GAUGE

State-Of-The-Art Technology Gives Fast & Accurate Readings

#539-000-005AV Electronic Trigger Pull Gge, 5K48D96 � �$ 56.99

Feeding problems and jams in your AR-15 can often be attrib-uted to bent or malformed magazine feed lips. This easy to-use tool is designed specifically to bend the feed lips back into place, so they guide the cartridge body like they’re supposed to. Trying to straighten the lips with pliers can create rough, unsightly gouges, or worse yet, cracks in the metal that can’t be repaired. The machined, steel shank with bevel cut and slot allows you to hook the lips and keep them supported, while you tweak their angle of contact on the cartridge case. Helps you recondition those old magazines, and saves the cost of buying new ones. abSPECS: Impact-resistant polymer, black. Shank - Steel, blued finish. 51/2" (14cm) long.

AR-15/M16

MAGAZINE FEED LIP TOOLReforms Feed Lips For Improved Magazine

Performance

#080-000-314AV AR-15 Mag Feed Lip Tool, 8K10Q98� � $ 12.99

Convenient “Go/No-Go” gauge lets you quickly and accurately check for correct feed lip gap. Helps ensure reliable feed-ing and prevent weapon failure caused by feed problems. Simply slip over the back of a suspect magazine and lightly press gauge between magazine feed lips. If the gauge passes through feed lips, either discard that magazine or use the Brownells Magazine Feed Lip Tool (available separately) to bring them back into specs and restore reliable feeds. If the gauge won’t pass through the lips, the gap is too narrow and must be widened. Machined from 4140 chrome-moly steel heat hardened to Rc 50-55 for dimensional stability, plus resistance to wear and corrosion. abSPECS: 4140 chrome-moly heat treated steel, in-the-white. Rc 52-60. Go: .454" No-Go: .476". For use on standard .223/5.56mm magazines only.

Ensure Proper Specs For Reliable Ammo Feed

#080-000-744AV Magazine Lip Gauge, 8K44M70 � � � � � $ 59.99

Magazine Not Included

AR-15/M16

MAGAZINE FEED LIP GAUGE

High-speed steel reamer is precisely tapered to match the shape of the standard A2 gas block retaining pin. Cleans up existing holes or tapers newly drilled holes to ensure a positive, secure fit and pre-cise alignment of the sight tower.SPECS: Reamer – High-speed steel, 2/0 reamer. Tapers from .1137" (2.8mm) O.D. at the tip to .1462" (3.7mm) O.D. near the shank. Handle – 23/4" (70mm) long, 5/8" (16mm) diameter.

AR-15/M16

GAS BLOCK TAPER PIN REAMER

Precisely Finishes Gas Block/Front Sight Tower Pin Holes

#080-000-674AV Taper Pin Reamer, 8K22F42 � � � � � � � � � $ 24.99

BRD's jig enables you to precisely drill the dimples in the exterior of an AR-15 barrel re-quired for anchoring gas block setscrews. It slides over any barrel with a .750" O.D. at the gas journal and gently locks in place with the two included setscrews, one of which locates

in the gas port to ensure the dimples will be perfectly positioned. Once the jig is installed, clamp the barrel securely in a padded bench vise, and drill the dimples with an 11/64" drill bit. Machined from rug-ged 1045 carbon steel heat treated to Rc 60 to resist damage from drill bit. Comes with both pointed and soft-tip setscrews. Works with gas blocks that require .420", .460" or .500" center-to-center dimple holes. ab

BRD ENGINEERING AR-15/M16

GAS BLOCK DIMPLE JIGEasy Way To Make Sure Gas Block Is

Precisely Placed & Securely Anchored

#100-032-039AV Gas Block Dimple Jig, 2E50F93 � � � � � $ 55.00

Heavy steel fixture securely holds and aligns a low-profile Vltor gas block to enable precise drilling of a straight or taper pin hole for permanent installation of the block. Can be modi-fied with file or rotary tool to fit other low-profile gas blocks, such as Yankee Hill and Stag Arms. Instructions included. abSPECS: 836 plate steel, black oxide coating. 1" (2.54cm) long, 2" (5.08cm) wide, 23/8" (5.99cm) tall. 17.3 oz. (490g) weight.

BRD ENGINEERING AR-15/M16

GAS BLOCK PINNING JIGDrilling Fixture For Permanent Attachment Of

Low-Profile Gas Block

#100-006-129AV Gas Block Pinning Jig, 2E63B63 � � � � � $ 83.99

High-quality steel tools make it easy to install and remove the 5/64" roll pin that secures the gas tube into AR-15 gas block. Kit includes a roll pin holder, starter punch and standard punch. Pin holder helps keep pin perfectly aligned as it starts into the hole and features knurled grip for easy manipulation. Starter roll pin punch has a short shaft, giving more control when starting pins or removing pins. The standard-length roll pin punch makes it easy to seat pin into final position. Both starter and standard-length punches feature smoothly-machined flats for easy grip with specs clearly stamped in for fast identification. ab

AR-15/M16

GAS BLOCK ROLL PIN PUNCH KITEasesInstallation & Removal Of Gas

Tube Roll Pin

#080-001-127AV Brownells Gas Block Roll Pin Punch Kit, 8K22P19� � � � � � � � � � � � � � � � � � � � � � � $ 26.99

13TH ARMORY AR-15/M16

AR ROLL PIN TOOLNo Need for Child-Size Hands or a Third Arm To

Install Those Tiny Roll Pins

#100-027-723AV AR Roll Pin Tool, 2D28A25 � � � � � � � � � � $ 29.99#100-027-724AV AR Roll Pin Tool Insert #1, 2D6M39 � � 6.99#100-027-725AV AR Roll Pin Tool Insert #2, 2D6L39 � � 6.99#100-027-726AV AR Roll Pin Tool Insert #3, 2D6C39 � � 6.99#100-027-727AV AR Roll Pin Tool Insert #4, 2D6E39 � � 6.99

Here's a case where the number 13 is lucky! This tool makes popping the roll pins in and out of an AR easy, fast, and error-free. No more trying to hold the small, slippery pin in place with one hand while fumbling with a generic pin punch in the other. The tip of this tool holds the pin for you, so you have an "extra" hand free to maintain precise control over the task. The basic tool serves as the core of a complete system of separate, interchangeable tips for installing each of the AR-15’s roll pins. It comes with the tip for installing the bolt hold open/release lever and the forward assist, plus a length of weed eater cable to temporarily hold bolt release in place while you install the pin. Other tips, sold separately, include: #1 fits the bolt catch/release lever AND the forward assist roll pin; this tip is included with the basic tool. #2 - triggerguard roll pin. #3 - gas block roll pin. #4 - charging handle roll pin. If you break one of the tips, your whole tool isn’t trashed. Just get a replacement tip, and you’re back in business! The handle is made of tough Delrin® handle that won’t be damaged by hammer taps and is large enough to fit comfortably fit adult-sized hands. The hardened steel shank is long enough to clear the receiver so you can use a small hammer to get stubborn pins moving without slipping and dinging the receiver’s finish or damaging the pin. ab

Replacement Tips

This simple plastic gizmo helps you install a gas block fast - and get the holes

in the barrel and the block lined up correctly on the first try. Puts an end to the annoying problem of a slightly off-kilter gas block re-stricting gas flow and impeding the reliability of your rifle! Insert the Genie into the gas block, line up the hole on the Genie with the gas port in the block, then mark the end of the gas block on the outside of the Genie. Using the Genie, mark the barrel accordingly and slide the gas block into place. The Genie even ensures you get the proper gap between the gas block shoulder on the barrel and the end of the block itself. It's not magic - it just seems like it. ab

TWO TWO THREE INNOVATIONS AR-15/M16

GAS BLOCK GENIEFast, Easy & Ultra-Precise Way

To Properly Align the Gas Block BEFORE You Lock It Down

#100-033-112AV Gas Block Genie, 3T10N71 � � � � � � � � � � �$ 12.99

Clamps around those fragile, easy-to-bend gas tubes to prevent dam-age during both removal and installation and adds a convenient “handle.” abSPECS: Steel, blued. Approximately 6" (15.2cm) long.

MARK BROWN AR-15/M16/AR-STYLE .308

GAS TUBE WRENCHProtects Tube From

Crushing During Installation & Removal

#133-100-015AV Gas Tube Wrench, 3C24K20 � � � � � � � � �$ 35.99

GU

NSM

ITH

ING

TO

OLS


SINCE 1939

AR

-15

/M16

GU

NSM

ITH

ING

TO

OLS

AC

CE

SSO

RY

MO

UN

TS

Compact tool makes the tricky pro-cess of installing the pivot pin fast and

easy by eliminating the need to apply pressure from two different planes while guiding the pin into the ears of the lower receiver. Puts an end to accidentally launching the spring and detent across the room while installing the pivot pin. Precision machined aluminum block and steel retaining pin fit between the pivot pin ears of the lower receiver to allow easy insertion of the pivot pin detent spring and detent, then keeps them in place while inserting the pivot pin. So simple, we wonder why nobody thought of this years ago! abSPECS: Aluminum body, hardcoat anodized, red. Hardened steel retaining pin.

SPECIAL OPERATIONS TRAINING ACADEMY AR-15/M16

PIVOT PIN INSTALLATION TOOLTakes The Frustration Out Of

Installing This Critical Part

#100-003-308AV Pivot Pin Installation Tool, 6B22B64 � � $ 26.99

Here's a series of specialized tools for performing tasks that are often necessary in AR-15 building, repair, or maintenance. These chores are not be the trickiest in the world of gunsmithing, but they can be fiddly and frustrating - kind of like what threading a need is to sewing! These tools help you get specific tasks done right on the first try without false starts or "oopses" that lead to scratched, scuffed, or otherwise marred gun finishes.

Bolt Catch Installation Punch Set includes a starter punch and finisher, both with flat sides to enable access to the pin without marring the receiver. #100-032-915AV Bolt Catch Installation Punch,

7A11C40� � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 13.29

Gas Block Taper Pin Removal Tool for fast, easy, safe removal of A2-type front sight tow-ers and Smith & Wesson M&P15 single-pin tower. Rugged, all-steel construction. #100-032-917AV Gas Block Taper Pin Removal Tool,

7A27A36 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 29.99

Pivot Pin Installation Tool helps you quickly and easily remove and install the pivot pin spring and detent as needed. Starter punch plus main punch work on all .250" dia. lower receiver roll pins. #100-032-913AV Pivot Pin/Roll Pin Installation Tool,

7A6Q11 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 6.99

Triggerguard Installation Tool gives precision control over installing the triggerguard roll pins to prevent damage to the receiver. Elimi-nates hammering in the pins, which can lead to damage to the pins, triggerguard itself, or the receiver. Comes with both an install pin and an uninstall pin that store conveniently inside the tool frame. Anodized aluminum tool body; steel pins. #100-032-916AV Triggerguard Installation Tool,

7A22D80 � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 27.49

Roll Pin Installation Tool Kit includes the Bolt Catch and Triggerguard installation tools listed above, plus everything else needed to install/remove all the roll pins in an AR-15, in-cluding: two-sided nylon/brass hammer and 6 steel punches (3 starter/3 driver in 1/16", 5/16" & 3/32" each). #100-032-914AV AR-15 Roll Pin Installation Kit,

7A44B01 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 48.99


AR MAINTENANCE & INSTALLATION TOOLS

Tools that Make Those Tricky or Time-Consuming Chores Easier & Faster

CNC machined, mechanical “No-Go” gauge tells you instantly if your gas tube is out of spec and needs replacement. Simply insert into the gas tube to check for flat spots, dents, kinks, and loss of concentricity. Perfect for armorers, competition shooters and oth-ers looking for the most accurate, reliable way to check for tube damage and maintain optimum rifle function. Each gauge is pre-cision ground to exact tolerances. Works on all AR-15, M16, and AR-style .308 rifles. abSPECS: Steel, black, matte finish. 83/4" (22.2cm) long.

MARK BROWN CUSTOM AR-15/M16

GAS TUBE GAUGE

Checks Gas Tube For Optimum Gas Flow

#133-000-002AV Gas Tube Gauge, 3C30F71 � � � � � � � � � � � $ 37.99

Convenient, quick-detach mount clamps solidly to almost any Picatinny or Weaver-style rail for mounting weaponlights, vertical grips, lasers, optics, and other accessories that need to be removed and rein-stalled quickly. Increases the flexibility of your weapon and allows quick changes of accessory configuration to meet individual mis-sion requirements. Lever-lock system will not work loose under recoil; the more force acting on the lever, the tighter it locks, yet when you depress the release tab, the lever swings open easily. Ad-just gripping force with a flat head screwdriver or coin for an ultra-secure fit even on non-mil-spec, over- or under sized rails. Lever may be configured to lock to the front or the rear to suit the op-erator’s preference. Locking bar on the side of the mount engages maximum rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement with rail slots. Has 5 rail slots. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 21/4" (5.7cm) long. Provides .615" (1.6cm) standoff from weapon rail.

AMERICAN DEFENSE

QUICK-RELEASE ACCESSORY MOUNTEasy-On/Easy-Off System For

Mounting Lights, Vertical Grips & Other Accessories

#100-017-102AV 5-Slot Quick-Release Acc. Mnt, 7B87G99 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 87.99

45° ACCESSORY MOUNT - Same quick-release clamp as the Q-R Accessory Mount places a 6-slot section of MIL-STD 1913 Picatinny rail at a 45° angle. Perfect for adding a red dot sight for close-range shooting with fast transition from prima-ry optic. Rail attaches at three positions on the mount for extra versatility in ac-cessory placement.SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Base uses 1.6" (4cm) rail space. Includes all hardware and instructions.#100-017-144AV 45° Quick-Release Mount, 2" Rail,

7B95H01 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 99.75#100-010-785AV 45° Quick-Release Mount, 3" Rail,

7B103J00 � � � � � � � � � � � � � � � � � � � � � � � � � 105.00#100-017-145AV 45° Quick-Release Mount, 6" Rail,

7B110H00 � � � � � � � � � � � � � � � � � � � � � � � � � 110.00

ab

Solidly clamps to either side of an AR-15, front sight base. Features two Picatinny rails to hold lights, lasers, sling adapters and other accessories. Machined for a secure fit so it won’t rotate or twist out of alignment. ab

SPECS: Aluminum, anodized, black, matte. 13/4" long. 2.3 oz. (66 g) wt.

ATLAS METAL PARTS AR-15/M16

ACCESSORY LIGHT MOUNT

#100-000-727AV AR-15 Light Mount, 7K37P14 � � � � � � � � $ 46.99

Rock Solid Mounting For Lights & Lasers

For situations where the standard 3, 6, 9, and 12 o’clock positions don’t work, we developed this offset angle mount for positioning weapon lights, lasers, and other tactical accessories ex-

actly where you need them. Won’t interfere with the view through the primary optic or backup iron sights, and allows mounting of a holographic red dot sight next to your scope for quick transitions to engage close-range targets. Simply cant the rifle slightly to the side to use the red dot. Lets you position a tactical flashlight for easy thumb activation of a tailcap switch without interfering with the op-tic. Fully machined from strong yet lightweight 6061 T6 aluminum billet, then hardcoat anodized for added strength, with a durable, non-reflective matte black finish that matches most AR-15 receiver finishes. A tunnel through the mount minimizes obstruction of your forward view, and additional circular cuts in the mount body further reduce weight without sacrificing strength. Ultra-secure clamping system fits any MIL-STD 1913 Picatinny rail, and is easy to install, remove, or reposition in the field or at the range. Full-length locking bar, hardened 4140 steel crossbolt, and an oversized, hex-head lock nut ensure a rock-solid installation even with the hex nut only finger tight. Deep-cut slot accepts a flat-head screwdriver, or even a U.S. quarter, for additional tightening torque. abSPECS: Body - 6061 T6 aluminum, hardcoat anodized, matte black. Crossbolt/Nut - 4041 carbon steel, black oxide finish. 1.875" (4.8cm) long, 1.25" (3.2cm) wide, .900" (2.3cm) high. 1.7 oz. (46g) weight.

AR-15/M16

45-DEGREE ANGLE MOUNTOffset Mount For Positioning Tactical

Accessories Right Where You Need Them

#080-000-533AV 45-Degree Angle Mount, 8K24B99 � $ 26.99

Add-on riser rail gives an additional 1/2" of elevation or offset sometimes needed to mount a red dot sight, light, laser, or other essential accessory. Clamps securely to any MIL-STD 1913 Picatinny rail and provides three Picatinny cross slots. Steel crossbolt and oversized, hex-head slotted thumbscrew enable fast, easy installation and removal, with or without tools. abSPECS: Rail – 6061 T6 aluminum, hardcoat anodized, black. Crossbolt/Thumbscrew – 4140 steel, black oxide finish. 13/8" (3.5cm) long, 11/2" (3.8cm) wide. Provides 1/2" (12.7mm) additional elevation. 1.4 oz. (38g) weight.

AR-15/M16 MINI RAILAdds Extra Elevation For Sights &

Other Accessories

#080-000-713AV Mini Rail, 8K16I52 � � � � � � � � � � � � � � � � � � $ 18.99

Lightweight, low-profile, rail clamps to hand-guard side rail to allow easy off-axis mounting of red dot sights in the 1:00 or 11:00 position. Lets

operator transition almost instantly from long-range primary optic to non-magnified CQB sight without breaking cheekweld. Viewing tunnel through the mount helps minimize obstruction of operator’s view of area around the target. Plenty of other uses, too; clamps to any MIL-STD 1913 Picatinny rail. Install on underside of handguard to position a laser or weaponlight close to vertical forend grip for easy operation of controls with support hand. Precision machined from 6061-T6 aluminum billet, then mil-spec Type III hardcoat anodized for added strength. Side bar and crossbolt locking system ensures secure, zero-movement attachment to primary rail, yet allows re-moval and reinstallation of backup sight without loss of zero. abSPECS: 6061-T6 aluminum, hardcoat anodized, matte black. 1.2 oz. (34g) weight.


ONE O’CLOCK OFFSET RAILFor Convenient Mounting Of Auxiliary Optics,

Lights & Other Accessories

#100-003-943AV One O’Clock Offset Rail, 8K39Q00 � � �$ 39.00

Low-profile, add-on rail lets you mount a flashlight, laser, red dot sight, or other tac-tical accessory at a 45° angle, so it’s close to

the rifle’s center line without obstructing your primary sight system. Precision-machined aluminum body uses a full-length steel clamp-ing bar and three hardened steel socket head bolts to anchor the mount securely to any Picatinny rail with minimal weight increase to your weapon. Five cross-slots; accepts Picatinny accessories. abSPECS: Aluminum, anodized, matte black finish. 21/8" (5.4cm) long, 17/8" (4.8cm) wide, 11/16" (1.8cm) high. 2.3 oz. (66g) wt.


PICATINNY ANGLE MOUNTOffsets Add-On Tactical Accessories For

Unobstructed Use of Primary Sights

#100-003-301AV 45 Degree Angle Mount, 2Z22Q41 � � � $ 25.99

Injection-molded, nylon-based, polymer platform installs easily on tube and conventional two-piece AR-15 handguards to mount lights, lasers, and tactical gear. Six mounting holes and lots of slots make it adaptable to different situations. Comes complete with three mounting screws and flat nuts. Accepts Picatinny accessories. abSPECS: Injection-molded polymer, black. 55/8" (14.3cm) OAL.

Easy Installation; Mount Tactical

Accessories

#573-000-027AV Univ. Acc. Mnting System, 3G8P15� � � � $ 10.75


UNIVERSAL ACCESSORY MOUNTING PLATFORM

Tough, polymer mount attaches to plastic USGI-style AR-15 handguards to accept your Streamlight TLR-1, TLR-2, M3, M5, or M6 light/laser. abSPECS: Polymer, black. 1.925" (4.9cm) long, .825" wide (2.1cm), .25" (6.4mm) high. Accepts Streamlight M3, M5, M6, TLR-1, and TLR-2 lights. Instructions included.

STREAMLIGHT® AR -15/M16

TACTICAL ILLUMINATOR MOUNTFits Standard Handguards For Mounting

Streamlight Lights & Lasers

#100-000-831AV Tactical Illuminator Mount, 1K17J49 � �$ 18.69

Aluminum Picatinny mount at-taches to AR-15 handguards to give quick, sturdy mounting for lights, verti-cal grips, bipods, and other accessories. Fits standard, round, plastic, AR-15 and CAR-15 handguards without removing the heat shield. Requires removal of heat shield to fit M4 handguards. Can be attached to top or bottom handguard. Accepts accessories that fit Picatinny rails. abSPECS: Aluminum, hard-anodized, black. 2" (5cm) long, with 5 Picatinny slots. Includes mounting hardware and include low-profile rail covers.

ERGO GRIPS AR-15/M16

UNIVERSAL MOUNTING PLATFORMQuickly Mount Accessories

To AR Handguards

#573-000-017AV 2"/5-Slot Univ. Mounting Platform, 3G12Q22 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 16.00


brownells.com

AC

CE

SSOR

Y M

OU

NT

S

Quick-release riser system mounts to any flattop upper receiv-er and raises the EOTech sight 1/4" so

the iron sights appear in the lower one third of its view for easier sighting. Locking throw lever makes installation and removal easy; adjustable for precise fit without special tools. Stepped section at the rear allows mounting a magnifier or night vision device. abSPECS: 6061 T6 aluminum, matte black finish. Length – 51/2" (14 cm). 3 oz. (86g) wt.

Raises The EOTech Sight For Better Iron Sight Alignment

#100-010-786AV EOTech Riser, 7B104L99 � � � � � � � � � � � $ 104.99

AMERICAN DEFENSE AR-15/M16

EOTECH RISER

Compact, lightweight clamp-on rail has 3 MIL-STD 1913 slots for mounting a light, laser, or iron sight at a 45° offset to keep main sights or optics clear. Machined aluminum clamping jaw provides superior holding strength with minimal weight increase. abSPECS: Aluminum, mil-spec hardcoat anodized, matte black. 13/8" (3.5cm) long, 13/8" wide, 7/8" (2.2cm) high. 1.2 oz. (34g) wt.#100-002-095AV 3-Slot Dovetail Angle Mnt, 9A20C00 � � $ 21.99

Solid, Offset Mount For Lights & Lasers; Prevents Interference With Primary Sights

YANKEE HILL MACHINE

DOVETAIL ANGLE MOUNT

AR

-15/M

16

Rugged, lightweight, aluminum mount allows the proven JPoint Reflex or Trijicon RedDot holographic sights to be mounted piggyback on an ACOG or standard-diam-eter scope, as well as directly to a flattop re-ceiver. Helps you get an effective secondary sight system that delivers fast, both-eyes-open engagement for close-range targets. JPA-TANSN can be installed directly to the

TA01NSN model ACOG scope as a standalone mount that replaces the existing rear aperture assembly and utilizes the factory mounting holes. Integral, raised “wings” fully guard the sides and top of your JPoint from blows incurred during combat or competition. JPA-TAS Bottom Strap allows the JPA-TANSN mount to be clamped around the eyepiece on all other models of ACOG scopes. abSPECS: Aluminum, black, matte, anodized finish. JPA-TANSN Mount - 15/8" (4.13cm) long, 13/4" (4.4cm) wide, 111/16" (4.3cm) high. Fits TA01NSN model ACOG. Includes wrench, mounting screws, and instructions. JPA-TAS Bottom Strap - 5/16" (.79cm) long, 13/4" (4.4cm) wide, 7/8" (2.2cm) high. Includes mounting screws. Requires purchase of JPA-TANSN mount to fit all models of ACOG scopes except TA01NSN.

Expanded Mounting Options & Versatility For JPoint Sight

JPA-TANSN

#452-000-041AV JPA-TANSN Mount, 2E63F04� � � � � � � � $ 66.45#452-000-042AV JPA-TAS Bottom Strap, 2E22F51 � � � � � 23.70

JPA-TAS

JP ENTERPRISES JPOINT MOUNT

One-piece cantilever mount with integral rings positions the op-tic almost 2" farther forward to provide extra clearance needed for a night vision device (NVD), add-on magnifier, or long eye relief scope. The “Proper Eye Position Ready” mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six Torx® screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any Picatinny receiver rail. Also available with quick-release lever (QD) system.SPECS: Aluminum, hardcoat anodized, matte black. 5.3" (13.5cm) long, 1.6" (4.1cm) wide, 2.4" (6.1cm) overall height. Height from top of rail to bottom of ring: 1" (2.5cm). 8.7 oz. (247g) weight. Fits scopes with 1" tube. Mounts to MIL-STD 1913 Picatinny rails.

BURRIS AR-15/M16 P.E.P.R.™ MOUNTProvides Extra Clearance For

Long Eye Relief Scope; Ring-Top Slots For Additional Accessories

#118-000-028AV 1" P.E.P.R. Mount, 8A76D04 � � � � � � � $ 77.99#118-000-038AV 1" QD P.E.P.R. Mount, 8A00PAA � � � � 114.99#749-101-260AV 30mm P.E.P.R. Scope Mnt, 8A00KTE � � 84.99#118-000-036AV 30mm QD P.E.P.R. Mnt, 8A00FBH� � 114.99#118-000-123AV 34mm P.E.P.R. Mount - 20 MOA,

8A00JUB � � � � � � � � � � � � � � � � � � � � � � � � 124.99

Low-profile, lightweight, flashlight mount attaches to any Picatinny rail and offers up to eight different off-set positions for installing popular Surefire flashlights as weapon lights. Fits flush with most Picatinny rail covers for uninterrupted rail coverage. CNC machined from solid billet aluminum with smooth, snag-free contours that won’t hang up on clothing or equipment. Locking bar and hex head steel crossbolt clamp solidly to rail. Retaining ring has a screw tensioning system that maintains a secure, friction fit on the flash-light. Fits Surefire 6P and similar flashlight with 1" O.D. body. abSPECS: 6061 T6 aluminum, mil-spec Type III, Class II hardcoat anodized, black. 23/4" (7cm) long x 1" (2.5cm) wide x 11/2" (3.8cm) high. 1.4 oz (37g) wt.

GEAR SECTOR AR-15/M16

OFFSET FLASHLIGHT MOUNT

#100-005-313AV 1" O.D. Offset Flashlight Mount, 9B56D94 � � � � � � � � � � � � � � � � � � � � � � � � � � $ 70.99

Converts Surefire Handheld Light Into Weapon Light

Aluminum ac-cessory rail bolts to the underside of the

standard factory plastic handguard to enable fast, easy mounting of lights, vertical grips, bipods, and other accessories. The “UFIR” features 11 cross slots machined to MIL-STD-1913 specifications to provide a variety of accessory options depending on the mission. At-taches to the underside of USGI-style plastic AR-15/M16 rifle or M4-style carbine handguard using the included mounting hardware abSPECS: 6061 T6 aluminum, mil-spec Type III hardcoat anodized, matte black. 45/8" (11.7cm) long. Steel mounting hardware included.

GG&G AR-15/M16

UNDER FOREARM INTEGRATED RAIL

#336-000-037AV UFIR Accessory Rail, 6C18A68 � � � � �$ 23.99

Accessory Rail Bolts To Factory Plastic Handguard

Machined aluminum mount allows sim-ple, no-gunsmith mounting of iron or micro red dot sights at a 45° position in line with your rifle’s bore. Helps improve your short-range speed-shooting without changing your optics. The offset position keeps your tactical sights from interfer-ing with your main optic but keeps them easily accessible by simply tilting your rifle to the side without changing your head position. Mount attaches easily to all Picatinny rails on rifle receiver or hand-guard. Fully reversible for right- or left-handed shooters. abSPECS: 6061 aluminum, hard anodized coating, black. 1¼" (3.1cm) long, .1¾" (4.4 cm) wide. 7.7 oz. (209g) wt. Fits MIL-STD 1913 Picatinny rails only.


45° OFFSET ADAPTERAccepts Tactical Sights & Micro-Red Dots

For Fast Targeting

#100-008-905AV JP 45° Offset Adapter, 2E54H04 � � � $ 56.95

All-metal, low-profile mount converts a Sure-Fire or similar handheld tactical flashlight into a compact weaponlight that gives you the versatil-ity of weapon-mounted illumination without the

expense of a separate light. Quick-detach design lets you remove the light from the gun and return it to handheld use in seconds. Triple-function cross-bolt with large, easy-grasp thumbscrew tightens

the mount around the light body to prevent slippage under recoil and clamps the mount to any MIL-STD 1913 Picatinny accessory rail. Also serves as a recoil lug to prevent unwanted movement of the mount on the rail. Retaining pin captures cross-bolt so it can’t fall off when the mount is removed from the weapon. Models available to fit three flashlight body diameters, listed below. Off-set models let you position the light to the left, right, or below the rail, approximately 11/4"

off-set from the centerline of the rail. SM-OCG – Dual thumbscrew cross-bolts ensure extra secure attachment to rail. SMQ-OCG adds an American Defense quick-release release lever for ultra-fast at-tachment and removal. Lever releases the mount only when you depress the release tab, and may be configured to swing to the front or the rear. Mount is adjustable to ensure a secure, no-slip fit on any Picatinny rail, including over- or under-sized commercial rails. abSPECS: Aluminum, hardcoat anodized, matte black. Steel cross-bolt, black. SM-E fits lights with .810" to .826" O.D., including SureFire Execu-tive series. SM-OCG off-set mount fits flashlights with 1.010" to 1.040" O.D., including Surefire G- and CK-series. SMQ-OCG quick-release off-set mount accepts flashlights with .980" to 1.040" O.D., including SureFire G- and CK-series.

VLTOR SCOUT MOUNTTurns Handheld Flashlight Into Compact,

Rail-Mounted Weaponlight

#100-003-714AV SM-E Scout Mount, 3A30D24 � � � � � � � �$ 32.99#100-004-279AV SM-OCG Off-Set Scout Mnt, 3A54Q23 � � 66.99#100-004-711AV SMQ-OCG Off-Set Scout Mnt, 3A72F52 � � 77.99

SMQ-OCG Off-Set

Flashlight not included.

SM-E/SM-I

Compact, Picatinny mini-riser is perfect for raising lasers, lights, sights, and other essential accessories that need a little extra lift or clearance. Constructed of aircraft grade aluminum and hardcoat anodized for extra-durability and long-lasting wear. Milled out cen-ter slot considerably cuts down on weight. Fits Picatinny rail systems with two slightly oversize screws to increase clamping power. abSPECS: Aluminum, hardcoat anodized, black. 15/16" long, 11/4" (3.1cm) wide, .72" (1.8cm) overall height. 1.1 oz. (31g) weight.

YANKEE HILL AR-15/M16

MINI RISER ASSEMBLYAdds Extra Mounting Space

For Small Accessories

#100-002-858AV Mini Riser Assembly, 9A15E52 � � � � � � � �$ 16.49

Extra-wide, offset base mounts flashlights and lasers to any railed handguard for easy light/laser activation using your thumb without your hand ever leaving the handguard or vertical grip. Ambidextrous design can be installed at the 3- or 9- o’clock positions to accommodate right- or left-handed shooters. Two, steel, Allen head screws pull the clamp tight to the rail, so it won’t shoot loose. Made from lightweight, PVC al-loy thermoplastic that’s resistant to most solvents. Adjustable to fit flashlights and lasers from .800" to 1" diameter. abSPECS: PVC alloy themoplastic, Black, Coyote Tan, or Flat Dark Earth. 11/2" (3.8cm) long, 21/2" (6.3cm) wide, 11/4" (3.2cm) high. 1.8 oz. (51g) weight. Fits .800" (20mm) to 1" (2.5cm) diameter flashlight and laser.

VIKING TACTICS

FLASHLIGHT/LASER MOUNTOffset For Fast, Easy Access To

Activation Switches

#100-004-371AV Flashlight/Laser Mnt, Blk, 7K23M64 � � $ 24.99#100-004-372AV Flashlight/Laser Mnt, Coyote, 7K23C64 � � 24.99#100-005-402AV Flashlight/Laser Mnt, FDE, 7K23C64 � � 24.99

OP

TIC

MO

UN

TS

Ultra-lightweight, one-piece scope mount locks securely on any Picatinny re-ceiver rail with a rock solid fit. A side lock-ing bar with three Torx® head bolts and three cross bars that drop into the rail slots ensure this mount won’t budge. Vertically split rings have grooved locking system and two Torx® screws to firmly hold the scope against recoil-induced slippage. Torx wrenches included. Models for 1" or 30mm scope tubes. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black or flat dark earth (FDE). 4¾" long x 13/16" wide x 2½" high. 3.1 oz. wt.

ULTRALIGHT EXTENDED & SPR SCOPE MOUNTS - Rigid, mini-malist mount has the rear ring pushed farther forward for use with optics that require extra eye relief. Extended mount has the rear ring 1" farther for-ward, while the SPR mount positions the rear ring 2" forward, making it ideal for use with the high-end optics often used on “Special Project Rifles”. Excellent mounts for op-tics with short body tubes, also. Still offers three strong crossbolts for installation on MIL-STD 1913 Picatinny rails, with a cross-slot keyway, provides excellent recoil protection. #953-000-007AV 1" Extended Scope Mnt, Blk, 3E00DPL� � $ 76.99#953-000-008AV 30mm Ext. Scope Mnt, Blk, 3E71A99 � � 71.99#953-000-009AV 30mm Ext. Scope Mnt, FDE, 3E84B99 � � 84.99#953-000-013AV 30mm SPR Scope Mnt, Blk, 3E79P99 � � 79.99#953-000-014AV 30mm SPR Scope Mnt, FDE, 3E88J99 � � 88.99

ULTRALIGHT CANTILEVER SCOPE MOUNT - Single-ring version of the mount above is ideal for mounting a red dot optic on a flattop reciever. Offers the proper height for absolute co-witness with factory “iron” sights. Accepts both optics with 1" or 30mm tubes.SPECS: 6061 T6 aluminum, hardcoat anodized, matte black or flat dark earth (FDE). 25/8" long, 11/16" wide, 25/8" high. 1.6 oz. wt. Includes Torx wrench and instructions.#953-000-004AV 30mm Cantilever Mnt, Blk, 3E62Q84 � �$ 63.99#953-000-006AV 30mm Cantilever Mnt, FDE, 3E70A70 � � 71.99

#953-000-002AV 1" Ultralight Scope Mount , 3E71A99 � �$ 71.99#953-000-003AV 30mm Ultralight Scope Mount, Blk,

3E71B99 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 71.99#953-000-011AV 30mm Ultralight Scope Mount, FDE,

3E79K99 � � � � � � � � � � � � � � � � � � � � � � � � � � � 79.99

SPR

ab

ab

Extended

AERO PRECISION

ULTRALIGHT SCOPE MOUNTRock Solid Mount That

Weighs Only 3 Oz.

BROWNELLS SPONSORS OVER 500 SHOOTING

EVENTS A YEAR

SUPPORT THE SPORT...


SINCE 1939

AR

-15

/M16

Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjust-able with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on any Picatinny rail, including over- or under-sized com-mercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the cross-bolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. ab

30mm rings for addi-tional support. Available in three different lengths for proper eye relief ad-justment. AD-Scout-S is standard length for mounting traditional optics. AD-Scout Cantilever positions op-tics farther forward to provide 1½" of extra space at the rear for mounting night-vision devices or when additional eye-relief is needed. AD-Scout-X uses the same great cantilever design as the AD-Scout Cantilever, but positions optics 2½" farther forward for maximum room at the rear for mounting night-vision devices or making eye-relief adjustments.SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Available in 1" or 30mm models. Height measured from top of rail to bottom of scope body - .87" (2.2cm) high. Distance between rings - 21/2" (6.3cm.) high. 7.1 ounces (201g) weight. AD-Scout - S - 41/2" (11.4 cm) OAL. AD-Scout Cantilever - 6" (15.2cm) OAL. AD-Scout -X - 7" (17.8cm) OAL.#100-017-142AU 1" AD-Scout-S Mnt , 7B128D71 � � � � � $ 142.49#100-004-026AU 30mm AD-Scout-S Mnt,

7B128H71� � � � � � � � � � � � � � � � � � � � � � � � � 142.99#100-017-141AU 1" AD-Scout Cantilever Mnt,

7B143K86 � � � � � � � � � � � � � � � � � � � � � � � � 156.99#100-004-025AU 30mm AD-Scout Cantilever Mnt,

7B143E86 � � � � � � � � � � � � � � � � � � � � � � � � 156.99#100-017-143AU 1" AD-Scout-X Extended Cantilever

Mnt, 7B159A00 � � � � � � � � � � � � � � � � � � � 170.99#100-004-027AU 30mm AD-Scout-X Extended

Cantilever Mnt, 7B159A00 � � � � � � � � � 170.99

QUICK-RELEASE SCOPE MOUNT - One-piece base with dual-lever system provides the same solid mounting and fast removal and reattachment of AD-68 Aimpoint Mount for traditional scopes requiring two rings. Also available with built-in 20 MOA of elevation.SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 4½" (11.4cm) long. Each ring covers 1" (2.5cm) of scope tube length. Height measured from top of rail to bottom of scope body (both models): .890"#100-003-653AU 1" Scope Mount, 7B151K43 � � � � � � � � � $ 159.99#100-017-125AU 1" Scope Mount w/20 MOA ,

7B151P43 � � � � � � � � � � � � � � � � � � � � � � � � � 169.99#100-003-654AU 30mm Scope Mount, 7B151D43 � � � � 159.99#100-017-126AU 30mm Scope Mount w/20 MOA,

7B151L43 � � � � � � � � � � � � � � � � � � � � � � � � � 169.99#100-017-123AU 34mm Scope Mount, 7B151J43� � � � � 159.99#100-017-127AU 34mm Scope Mount w/20 MOA,

7B151H43 � � � � � � � � � � � � � � � � � � � � � � � � 169.99#100-017-124AU 35mm Scope Mount, 7B151E43 � � � � � 159.99#100-017-128AU 35mm Scope Mount w/20 MOA,

7B151A43 � � � � � � � � � � � � � � � � � � � � � � � � � 169.99

AIMPOINT MICRO MOUNT - Light-weight, quick-detach mount lets you in-stall and remove your Aimpoint Micro se-ries red dot in seconds. Replaces original factory base and secures to the Aimpoint sight with four, high-strength, steel Torx® screws for a tight hold under heavy recoil. Mount is also available with either a lower 1/3 co-witness or absolute co-witness.SPECS: 6061 T6 aluminum, hardcoat T3 mil-spec anodized, matte black. Fits Aimpoint Micro series red dot sights only. Low Mount - .88" (2.2cm) Centerline height with optic. 1/3 Co-Witness Mount - 1" (2.5mm) Cen-terline height with optic. Absolute Co-Witness Mount - 1.5" (3.8cm) Cen-terline height with optic.#100-004-024AU Aimpoint Micro Mount, Low,

7B00CWE � � � � � � � � � � � � � � � � � � � � � � � � � $ 69.99#100-017-114AU Aimpoint Micro Mount, 1/3 Co-

Witness , 7B79M50 � � � � � � � � � � � � � � � � 85.99#100-017-113AU Aimpoint Micro Mount, Absolute Co-

Witness , 7B79K50 � � � � � � � � � � � � � � � � � 85.99

platform for mounting high-power op-tics on flattop rails with the versatility of a quick-detach tactical mount. Dual release lever system grabs the rail in two places. Cantilever extends 2" to aid in achieving proper eye relief and height above receiver with conventional scopes – no need for an ex-tended riser or separate rings. Also available with built-in 20 MOA of elevation. SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 6" (15.2cm) long, 17/8" (4.8cm) wide, 21/2" (63.5cm) high. 2½" space between rings. Centerline of rings is 1½" (3.81cm) above the rail.#100-005-757AU 1" AD-RECON Mount, 7B166I57 � � � � $ 179.99#100-017-119AU 1" AD-RECON Mount w/20 MOA,

7B174D14 � � � � � � � � � � � � � � � � � � � � � � � � � 185.99#100-005-758AU 30mm AD-RECON Mount,

7B166F57 � � � � � � � � � � � � � � � � � � � � � � � � � 179.99#100-017-120AU 30mm AD-RECON w/20 MOA,

7B174E14 � � � � � � � � � � � � � � � � � � � � � � � � � 185.99#100-017-117AU 34mm AD-RECON Mount,

7B166A57 � � � � � � � � � � � � � � � � � � � � � � � � � 179.99#100-017-121AU 34mm AD-RECON w/20 MOA,

7B174C14 � � � � � � � � � � � � � � � � � � � � � � � � � 185.99#100-017-118AU 35mm AD-RECON Mount,

7B166Q57 � � � � � � � � � � � � � � � � � � � � � � � � 179.99#100-017-122AU 35mm AD-RECON w/20 MOA,

7B174J14 � � � � � � � � � � � � � � � � � � � � � � � � � 185.99

AD-RECON-H/X SCOPE MOUNTS - One-piece integral base and rings with dual-lever system provides a quick attach/detach platform for mounting optics onto flattop-style AR-15s. Extra-high mounts are available in two different lengths for proper eye relief or night-vision device attachment. AD-RECON-H cantilever po-sitions optics forward, leaving 1½" space to the rear of the back ring. AD-RECON-X uses the same cantilever design, but places the optics farther forward leaving 2¾" space to the rear of the back ring. SPECS: 6061-T6 Aluminum, T3 mil-spec anodized, matte black. 8 oz (226g) wt. (all models). Heights measured from top of rail to centerline of scope tube. AD-RECON-H – 6" (15.2cm) OAL. 2½" (6.3cm ) space be-tween rings. 1" and 30mm model – 17/8" (4.7cm) height. 34mm and 35mm model - 2" (5.1cm) high. AD-RECON-X – 7" (17.8cm) OAL. 2¼" (5.7cm) space between rings. 1" model – 13/8" (3.5cm) height. 30mm model – 1½" (3.7cm) height. 34mm model - 1 9/16" (3.9cm) height. 35mm model - 1 5/8" (34.1cm) height.#100-006-229AU AD-RECON-H Mnt, 1", 7B178Q69 � � � $ 186.99#100-005-761AU AD-RECON-H Mnt, 30mm,

7B178Q69 � � � � � � � � � � � � � � � � � � � � � � � � 186.99#100-017-131AU AD-RECON-H Mnt, 34mm,

7B178K69 � � � � � � � � � � � � � � � � � � � � � � � � 186.49#100-017-132AU AD-RECON-H Mnt, 35mm,

7B178B69 � � � � � � � � � � � � � � � � � � � � � � � � 186.49#100-005-759AU AD-RECON-X Mnt, 1", 7B181E71 � � � � 189.99#100-005-760AU AD-RECON-X Mnt, 30mm,

7B181G71 � � � � � � � � � � � � � � � � � � � � � � � � � 189.99#100-017-129AU AD-RECON-X Mnt, 34mm,

7B181J71 � � � � � � � � � � � � � � � � � � � � � � � � � 189.99#100-017-130AU AD-RECON-X Mnt, 35mm,

7B181I71 � � � � � � � � � � � � � � � � � � � � � � � � � � 189.99

AD-SCOUT OPTICS MOUNT - One-piece integral base and rings designed for traditional optics or similar sights that require two,

AD-68 AIMPOINT MOUNT - Designed for Aim-point optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four config-urations to suit a variety of mounting needs. Stan-dard co-witnesses “iron” sights near the center of the optic when mounted on an AR-15/M16/M4 with standard-height mil-spec sights. Low posi-tions the scope as close as possible to the top of the receiver. High positions the backup sight picture in the lower 1/3 of the optic view-ing area. Cantilever provides same co-witness elevation as High mount and positions the Aimpoint 1½" forward to provide room for rear-mounted night-vision device or Aimpoint 3X Magnifier.SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height mea-sured from top of rail to bottom of scope body. Standard - .940" high. Low - .520" high. High – 1.120" high. Cantilever - 1.120" high.

#100-003-650AV Standard Aimpoint Mount, 7B104B99 � � � � � � � � � � � � � � � � � � � � � � � � $ 104.99

#100-003-652AV Low Aimpoint Mount, 7B104H99 � � � 104.99#100-003-651AV High Aimpoint Mount, 7B104Q99 � � 104.99#100-003-649AV Cantilever Aimpoint Mount,

7B132G99 � � � � � � � � � � � � � � � � � � � � � � � � 132.99

ACOG MOUNTS - The AD-B2 mount re-places original factory base on 1.5x, 2x, and 3x Trijicon ACOG scopes and allows quick-detach installation on Picatinny receiver rails. Attaches with two steel Torx® screws (included) for a tight hold under heavy re-coil. Both the medium-sized AD-B3 and the larger AD-B4 are designed for full-size ACOG mounts and will fit TA01, TA11, TA31 or similar scopes with ACOG style bases. Both mounts will accept several different risers and use the QD Au-to Lock™ Lever system to fit on both in-spec and out-of-spec rails.SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height mea-sured from top of rail to bottom of scope body - .25" (7.8mm). AD-B2 - Fits 1.5x, 2x, and 3x ACOG only. AD-B3 – Fits full-size ACOG mounts. 3.5" (8.9cm) OAL. AD-B4 - Fits full-size ACOG mounts. 4" (10.2cm) OAL.

#100-004-583AV AD-B2 Mount, 7B68N90 � � � � � � � � � � � $ 71.99#100-017-100AV AD-B3 Mount, 7B72C50 � � � � � � � � � � � 72.50#100-017-101AV AD-B4 Mount, 7B80E99 � � � � � � � � � � � 80.99

COMP M4 RISERS - Designed to interface with the AD-B2 modular base, the B2-CM4CO riser and B2-CM4SO-COM riser are configured for the Aimpoint Comp M4 sight. The B2-CM4CO riser will put the iron sights at the true co-witness height while the B2-CM4SOCOM riser puts the iron sights in the lower third of the optic.SPECS: 6061 T6 aluminum, hardcoat T3 Mil-Spec anodized, matte black. B2-CM4CO – 2-½" (6.3cm) long, 3/4" (1.9cm) wide, 3/8" (0.95cm) high. B2-CM4SOCOM - 23/4" (6.9cm) long, 3/4" (1.9cm) wide, 5/8" (1.6cm) high. AD-RECON MOUNT - All-in-one mount combines a rock-solid

AMERICAN DEFENSE AR-15/M16

QUICK-RELEASE OPTICS MOUNTS

Rock-Solid Mounts With Quick-Detach System

#100-017-115AV B2-CM4CO Co-Witness Riser, 7B26H59 � � � � � � � � � � � � � � � � � � � � � � � � � $ 33.49

#100-017-116AV B2-CM4SOCOM Lower 1/3 Co-Witness Riser, 7B30J47 � � � � � � � � � � � � 33.49

Quick-detach mounts provide a rock-solid platform for a variety of optical sights on Picatinny flattop rails. GG&G's innovative Ac-cucam latch system provides quick removal and installation in just seconds while maintaining 1/2 MOA repeatable accuracy. Plus, it's tension adjustable for a solid fit even on out-of-spec rails. All mounts are precision machined from 6061 T6 aluminum and hardcoat an-odized for added durability; clamping systems are 4140 steel for maximum strength. Non-reflective matte black finish. ab

ACCUCAM MOUNT w/INTEGRAL 30mm RINGS - Designed spe-cifically for the AR weapon platform with rings spaced 4.400" center-to-center for excellent eye relief adjustment. Height from top of dovetail to centerline of ring is 1.400" for good cheekweld. Top ring straps secured with four Allen head screws for recoil-proof hold. 5" (12.7cm) long x 23/16" (5.6cm) wide. #336-000-012AV Accucam Mount w/30mm Rings,

6C205E49 � � � � � � � � � � � � � � � � � � � � � � $ 205.49

AC-30 ACCUCAM MOUNT w/30mm INTEGRAL RINGS - Gives the shooter additional eye relief when crouching, sitting, or prone position. Tall enough to provide clearance for large ob-jective lenses on long-range rifle scopes, while skeletonized frame reduces weight. Not recommended for use on .50 BMG. 5" (12.7cm) OAL, 4" (10.2cm) mounting base length. 3 3/4" (9.5cm) inside ring-to-ring#336-000-054AV AC-30 Accucam Mount w/30mm

Integral Rings, 6C201I82 � � � � � � � � $ 206.99

FLT ACCUCAM MOUNT - Designed to meet the needs of SPR shooters, with 30mm integral rings, this mount permits forward scope mounting and positions the scope 11/2" further forward than stan-dard GG&G scope mounts. 5" (12.7cm) OAL. 33/4" (9.5cm) inside ring-to-ring. #336-000-055AV FLT Accucam Mount, 6C183L29 � � �$ 187.99

ACCUCAM LEVER FOR EOTECH - Cam-operated quick-detach lever replaces existing thumbnut mounting screw on EOTech sights for rapid installaton and removal. Does not change the mounting height of EOTech and allows co-witness-ing with iron sights. 500 Series fits EOTech models 511, 512, 551, and 552. XPS Series fits EOTech XPS2 and XPS3 sights.#336-000-017AV Accucam Lever For EOTech 500

Series, 6C71G17 � � � � � � � � � � � � � � � � � �$ 72.99#336-000-041AV Accucam Lever For EOTech XPS

Series, 6C81N89 � � � � � � � � � � � � � � � � � � 83.99

ACCUCAM MOUNT FOR TRIJICON ACOG - Low-profile, steel-and-aluminum mount at-taches directly to the body of the ACOG with two large Allen head screws for a rock-solid installation. Cam-operated quick-detach le-ver allows easy removal and installation of sight. Fits all standard and compact ACOG scopes designed for mounting to flattop re-ceivers. #336-000-018AV Accucam Mount For ACOG,

6C00EPG � � � � � � � � � � � � � � � � � � � � � � � �$ 115.99

ACCUCAM BASE W/PICATINNY RAIL - Gives quick-detach capability to any scope you mount on your flattop AR. Topside slots are machined to true MIL-STD 1913 specs to accept any Picatinny scope rings. Mount also elevates the scope an extra 1/2" above the receiver. #336-000-011AV Accucam Base w/Picatinny Rail,

6C132J59 � � � � � � � � � � � � � � � � � � � � � � �$ 135.99

GG&G AR-15/M16

QUICK-DETACH OPTIC MOUNTSRock Solid, Quick-Detach Mounts With Repeatable Accuracy

OP

TIC

MO

UN

TS

PAGE 97Orders/Tech: 800-741-0015order on the web

brownells.com

FRA

ME

S/SLIDE

S19

11 AU

TO

RIM

FIRE

CO

NV

ER

SION

KIT

S

This streamlined mount raises any scope or red dot sight ½" for easier eye alignment without adding needless bulk or weight to the gun. Precision-machined, 5½" base mounts quickly and easily to any Picatinny rail to provide a secure and stable base for your sighting equipment. abSPECS: Aircraft grade aluminum, hardcoat anodized matte black. 5¼" length, ¾" total height, 1¼" width. Raises equipment ½".

YANKEE HILL MACHINE AR-15/M16/AR-308

SCOPE RISERMinimalist Design Raises

Optics ½"

#100-010-687AV 227A Scope Riser, 9A31E05 � � � � � � � � � $ 34.99

AR

-15/M

16

One-piece, aluminum mount with integral rings is precision ma-chined to true MIL-STD 1913 Pica-tinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are ideal for use with long eye relief scopes. Mounts available for 1"/30mm and 34mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes. Torx® head screws (4 on 1"/30mm, 6 on 34mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes instructions and T15 and T20 Torx wrenches. 1"/30mm - Approximately 51/2" (14cm) long, 13/4" (4.4cm) wide, 21/8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" (24.5mm), measured from top of receiver rail to bottom of scope. 34mm - 53/4" (14.6cm) long, 115/16" (4.9cm) wide, 21/2" (6.3cm) overall height. 7 oz. (198g) weight. Height - .760" (1.9cm), measured from top of receiver rail to bottom of scope tube.


FLATTOP OPTIC MOUNTIntegral Offset Rings For

Rock-Solid Mounting

#452-000-044AV 1"/30mm Flattop Optic Mnt, 2E162J12 � � $ 170.95#452-000-124AV 34mm Flattop Optical Mnt, 2E162J12 � � 170.95

Machined aluminum mounts clamp directly to a MIL-STD 1913 Picatinny flattop rail to raise the scope and push it forward, eliminat-ing the need for separate risers or specialized short eye relief optics. Eleven MIL-STD 1913 Picatinny cross-slots on top offer plenty of flexibility in ring spacing. Slides into place and secures with steel crossbolts that hold tight. Mark 1 locks into place on the receiver with two, flush-fitting T-15 Torx® screws. Mark 2 rail provides the same advantages as the Mark 1, with the added benefit of easy-to-grasp 1/2" hex nuts on the crossbolts for quick-release removal and re-install without loss of zero. abSPECS: Aluminum, hardcoat anodized finish, matte black. Steel cross-bolts. 51/2" (14cm) long.

Flattop-Mounted Risers Postion the Scope Where You Need It

Mark 1 Rail Mount

#526-000-157AV Mark 1 Rail Mount, 4K40N94 � � � � � � � � $ 41.99#526-000-158AV Mark 2 Rail Mount, 4K78A39 � � � � � � � � 80.99

Mark 2 Rail Mount

LEUPOLD AR-15/M16

INTEGRAL MOUNTING SYSTEM

One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to Picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum. Models available to fit 1" and 30mm scope bodies. abSPECS: Aluminum, hardcoat anodized, black, matte finish. 51/8" (13cm) O.A.L.. Height measured from top of rail to bottom of ring. 1" - 1.18" (2.99cm) high, 10.7 oz. (303g) weight; 30mm - 1.14" (2.89cm); 10 oz. (283.5g) weight.

Integrated Mount & Rings For Rugged Strength

#553-000-005AV Flattop Scope Mount, 1", 3E50A94 � � � $ 54.99#553-000-007AV Flattop Scope Mnt, 30mm, 3E44H08 � � 46.99

M & A AR-15/M16

FLAT TOP SCOPE MOUNT

Quick-attach/detach flattop scope mount is designed to stay permanently installed on the scope at all times. Quick-release hex nuts make it easy to remove it

from the rifle to swap onto a different rifle or replace with a different optic. A built-in 20 MOA elevation maximizes long-range capability. Machined from strong, rigid 7075-T6 aluminum to precise toleranc-es to ensure the scope is not subjected to stress, torquing, or bending as the ring screws are tightened. Titanium crossbolts and jaws hold securely to the rifle’s MIL-STD 1913 Picatinny without adding excess weight. Micro-radiused and inside edges honed to prevent the rings from scratching the scope tube. abSPECS: Machined 7075 T6 aluminum, hardcoat finish, matte black. Ac-cepts scopes with 30mm O.D. tubes. Clamping footprint: 2.725" of rail space. Heights measured from top of receiver rail to centerline of scope.#749-012-016AV UniMount, High (1.125"), 2E252B00 � � $ 252.00#749-012-017AV UniMount Extra High (1.375"),

2E252A00 � � � � � � � � � � � � � � � � � � � � � � � � 252.00

Solid, Yet Easily Detachable One-Piece Scope Mount For Your Flattop

NIGHTFORCE AR-15/M16

UNIMOUNT

Offering the same one-piece QD concept as the Nightforce Uni-Mount, the Ultralite™ MagMount™ has a third crossbolt for even greater protection against recoil. Tall enough to allow clearance of 56mm objective riflescopes when mounted on a continuous rail. MagMount does not have built-in elevation. Available for 30mm and 34mm scope tubes. abSPECS: Machined 7075 T6 aluminum, hardcoat finish, matte black. Heights measured from top of receiver rail to centerline of scope.

NIGHTFORCE

ULTRALITE MAGMOUNTFor Ultra-Secure, Recoil-

Resistant Mounting Of Large Scopes

#100-012-609AV 30mm MagMount, 1.375" High, 2E286Q00 � � � � � � � � � � � � � � � � � � � � � � � � $ 295.00

Lightweight aluminum mount clamps to flattop receiver and is cus-tom engineered to provide optimum height and eye relief for the Nikon M-223/M-308 series of scopes. Can also be used with a variety of other optics with 1" O.D. tubes. Cantilever extends 2" forward of the receiver to accommodate long eye relief scopes. Three steel crossbolts and the full-length clamp-ing bar secure the mount to any MIL-STD 1913 Picatinny receiver rail. M-223XR is designed for use on AR-15/M16 rifles chambered in 5.56 NATO/.223 Rem. M-308 model is for 7.62x51 NATO/.308 Winchester chambered AR-308 rifles. Both mounts have a built-in 20 MOA elevation that aids in accurate long-range shooting without exceeding your scope’s elevation adjustment. abSPECS: Aluminum, hardcoat anodized, matte black (MB), Realtree® Max-1® (Max) or Mossy Oak Brush® (Brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) O.A.L. 3½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requires 3½" of rail space. 5.5 oz. wt.

Forward Cantilever For Plenty Of Eye Relief; 20 MOA Model

Available

#100-011-750AV M-223XR 20 MOA Mnt, MB, 6Z76M57 � �$ 99.95#100-016-058AV M-308 20 MOA Mnt, MB, 6Z99P95 � � � 99.95

NIKON AR-15/M16

M-SERIES SCOPE MOUNTS

Extended cantilever mount pro-vides plenty of eye relief to mount a 30mm scope, or position a magnifier, night vision device, or other sighting accessory behind the main optic. Two quick-release levers clamp to a flattop receiver rail with unique cam action for a tight hold during recoil. Depress the locking tabs, swing both levers open, and the mount easily lifts off the rifle. Cross bars can be adjusted to fit any Picatinny rail, including over- or under-sized commercial rails. Levers may be positioned to open to the front or the rear to suit the operator’s preference. Five, heavy duty steel hex head screws (three on top, two on bottom) clamp the 30mm vertically split ring halves together. abSPECS: 6061 T6 aluminum, Type III mil-spec hardcoat anodized finish, flat dark earth. Steel cross bars, matte black. 6" (15.2cm) O.A.L. Requires 4" (10.2cm) of rail space. Height measured from top of rail to bottom of scope body: .87" (2.2cm) high. Distance between rings: 21/2" (6.3cm.). 7.1 ounces (201g) weight.

NOVESKE AR-15/M16

QUICK-DETACH OPTIC MOUNTCantilever Mount For Optics,

Magnifiers Or Night Vision Devices

#100-004-771AV Quick-Detach Optic Mnt, 1A00GPE � � $ 206.99

Quick-transition mount combines secure, correct-height attach-ment of an Aimpoint 3XMag behind a compatible red dot sight with a spring-loaded mechanism that flips the magnifier aside for instant return to unmagnified operation of sight. Lets you shift from long-range to short-range targeting almost instantly. Securely installed to any MIL-STD 1913 Picatinny receiver rail with a robust locking bar and bolt system, so the magnifier stays correctly positioned behind the sight. Mount bolts directly to the factory holes in the bottom of the 3XMag (machine screws included)—no gunsmithing required. Lever can be installed so flip path is on left or right side. Quick-flip tab has deep grooves for easy activation with a flick of your thumb. abSPECS: Aluminum, hardcoat anodized, matte black.

SAMSON MANUFACTURING CORP.

QUICK-FLIP MOUNT FOR AIMPOINT 3XMAGFlips Magnifier Aside For Instant Transition From Long-Range To

Close-Range Targeting

#100-004-239AV Quick-Flip Mount w/Bolt-On Base, 1B153N82 � � � � � � � � � � � � � � � � � � � � � � � � $ 163.40

The Rapid Acquisition Multisight Platform (R.A.M.P.) is a one-piece can-tilever mount with integral scope rings that positions optics farther forward to provide 13/4" of extra space at the rear for mounting a long eye relief scope, night vision device, or magnifier. Features removable MIL-STD 1913 Picatinny rails on the left and right sides that let you mount secondary sights 45° off-axis from the main optic. Each top ring strap is secured with four Torx® screws for recoil-proof holding power. Two large hex nuts and 33/4" long steel clamping bar lock the mount to a Picatinny receiver rail. Smooth contours and radiused edges give a streamlined appear-ance, reduce weight, and prevent snagging. Models available for 1" or 30mm scope body. abSPECS: 6061 T6 aluminum, hardcoat anodized, and steel hardware, mag-nesium phosphate finish, matte black. 71/8" (18.1cm) long, 23/8" (6cm) wide, 21/4" (5.7cm) high. Height measured from top of rail to bottom of ring: .75" (1.9cm). Approximately 9.7 oz. (275g) weight.#947-000-263AV 1" R.A.M.P. Tactical Mnt, 7D120I19 � � �$ 151.99#947-000-264AV 30mm R.A.M.P. Tact. Mnt, 7D136I93 � � 151.99

WARNE AR-15/M16

R.A.M.P. TACTICAL MOUNTCantilevered For Long Eye Relief Scopes, Plus 45° Offset Rails For Secondary Sights

One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and re-moval without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that re-sists loosening under shock and vibration. Four hardened Torx®-head screws clamp each ring cap to the lower half. Models available for scopes with 1" or 30mm diameter bodies. 1" mount includes a Picatinny rail on the rear scope ring for mounting a holographic red dot sight. 30mm model’s forward cantilever lets the scope overhang the front of the receiver to ensure plenty of eye relief. abSPECS: Aluminum, hardcoat anodized, black. Approx. 5" (12.7cm) long, 17/8" (4.8cm) wide. Approx. 8 oz. (227g) weight. 1" - Height from top of base to inside bottom of ring: 1.2" (30.5mm). 30mm - Height from top of base to inside bottom of ring: 1" (2.5mm).


ACCU-RIZER FLATTOP SCOPE MOUNTFor Quick Scope Detach/Reattach

Without Loss Of Zero

#965-000-087AV Accu-Rizer 1" Scope Mount, 5F136K76 � � � � � � � � � � � � � � � � � � � � � � � � � $ 145.99

#965-000-104AV Accu-Rizer 30mm Scope Mount, 5F137J14 � � � � � � � � � � � � � � � � � � � � � � � � � 143.99

Machined aluminum riser clamps to flattop AR-15 re-ceiver to position primary optic

sights at eye level. Raises mounting height .750" to eliminate the need for extra-high rings in most applications. True, MIL-STD 1913 cut accepts Picatinny rings. Two, easy-to-grip, slotted hex nuts ac-cept a U.S. quarter for extra tightening leverage; full-length clamp-ing bar locks riser securely to flattop receiver for zero movement even during harsh tactical operations. Precision CNC-machined to ensure an exceptionally secure lock on the receiver rail. Smooth, curved front and rear contours on the underside provide a stream-lined appearance, reduce weight, and minimize the chance of catching on gear. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approxi-mately 5" (12.7cm) long, 1" (2.5cm) wide at the base, .975" (2.45cm) high overall. Adds .75" (1.9cm) to height of flattop. 4.8 oz. (136 g) weight.

Raises Optical Sights To Eye Level For Quick, Precise,

Target Acquisition

#080-000-506AV Flattop Riser Assembly, 8K39M19 � � � � $ 42.99

AR-15/M16

FLATTOP RISER

OP

TIC

MO

UN

TS


SINCE 1939

Precision-machined aluminum riser mount adds approximately .600" to height of flattop so primary optic can be positioned higher for a more comfortable, heads-up shooting stance and faster target acquisition. Eliminates the need for extra-high rings in most instal-lations. Top of mount is available in 0 or 20 MOA to compensate for added height and minimize effect on point-of-impact. Provides a full 7" of usable mounting length, 11/2" more than receiver rail; under-side of extension is relieved to provide clearance over handguard. Precision machined from aluminum billet, with MIL-STD 1913 Pica-tinny slot-and-rail spacing that allows fast and simple adjustment of eye relief, plus greater flexibility in choice of optics. Clamps securely to receiver rail with three heavy duty steel cross-bolts to prevent movement under recoil, and matches receiver profile for a smooth, seamless look. abSPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 8.875" (22.5cm) long, 1.125" (2.9cm) wide at base. Adds .600" (1.5cm) to height of flattop at rear, .570" (1.4cm) at front. 7.7 oz. (219g) weight.

EGW AR-15/M16

EXTENDARISER FLATTOP MOUNT

Elevates Optic For Fast Target Acquisition; Extra Length For More Eye Relief

#296-000-103AV Extendariser Flattop Mount, 20 MOA, 6B108P00 � � � � � � � � � � � � � � � � � � � � � � � � � $ 112.50

#296-000-228AV Extendariser Flattop Mount, 0 MOA, 6B108M00 � � � � � � � � � � � � � � � � � � � � � � � � 112.50

One-piece rails cut to true, MIL-STD 1913 Picatinny spec match the look and feel of your standard, A4 flattop while adding 1⁄2" of height for proper cheek weld with optics and tactical sights. Stream-lined design encloses the receiver rail for a “built-in” appearance and eliminates protruding hardware that can snag on brush, slings, and clothing. Nylon-tipped, Allen screws, tapped through the top, deliver downward pressure between the receiver rail slots for ex-ceptional holding power. Precision machined from strong, yet light-weight 6061-T651 billet aluminum, then hardcoat anodized with a tough, Teflon-impregnated finish to Mil-A-8625 for extra strength and superior wear resistance. ab

LOW PROFILE RISER - Adds 1/2" of height along the entire 71/4" length of a mil-spec, A4 flat-top receiver, so you can use lower rings when mounting scopes and other optical sights.SPECS: Rail - 6061-T651 billet aluminum, hard black anodized. 71/4" (18.4 cm) long x 1/2" (1.3 cm) high. 4.2 oz. (119 g) wt. Fits mil-spec flattop receivers.#100-002-203AV Low Profile Riser, 6K53C49 � � � � � � � � � $ 56.99

SCOUT RAIL - Provides 3-1⁄2" of valuable rail space over M4-style handguards for mount-ing tactical optics farther forward. Standard mod-el provides maximum flexibility in positioning optics. BUIS Scout Rail - Chopped tail section allows attachment of a flip-up, rear sight to the back of your existing flattop rail, so it regulates properly with standard issue front sights. SPECS: 6061-T651 billet aluminum, hard black anodized. Fits mil-spec flattop receivers. Scout Rail - 10-1⁄2" (26.7cm) long x 1⁄2" (1.3cm) high. 4.4 oz. (125g) wt. BUIS Scout Rail - 8-1⁄4" (21cm) long x 1⁄2" (1.3cm) high. 3.3 oz. (94g) wt. #100-002-204AV Standard Scout Rail, 6K74J99 � � � � � � � $ 76.99#100-002-205AV BUIS Scout Rail, 6K77C02� � � � � � � � � � � 82.99

HAHN PRECISION AR-15/M16

LOW PROFILE TACTICAL RAILSClean, Streamlined Look; Made To Mil-Spec Standards

BUIS Scout Rail

Standard Scout Rail

This streamlined mount raises any scope or

red dot sight ½" for easier eye alignment without adding needless bulk or weight to the gun. Precision-machined, 5½" base mounts quickly and easily to any Picatinny rail to provide a secure and stable base for your sighting equipment. abSPECS: Aircraft grade aluminum, hardcoat anodized matte black. 5¼" length, ¾" total height, 1¼" width. Raises equipment ½".

YANKEE HILL MACHINE AR-15/M16/AR-308

SCOPE RISERMinimalist Design Raises

Optics ½"

#100-010-687AV 227A Scope Riser, 9A31E05 � � � � � � � � $ 34.99

Mounts directly on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Has true MIL-STD 1913 Picatinny cut cross-slots along its entire length abSPECS: Aluminum, black, matte. 71/2" (19cm) long. 31/2 oz. (99g) wt.

AR-15/M16

CARRY HANDLE SCOPE MOUNTFast, Easy Mounting For

Scopes & Dot Sights

#080-000-660AV Picatinny Carry Handle Base, 9A27P16 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 29.99

Precision-machined aluminum scope mount attaches securely to the carry handle of your AR-15/M16/M4 to provide a solid, light-weight platform for tactical optics. MIL-STD 1913 rail cut accepts Picatinny and STANAG mounting systems, while hollow, .335" di-ameter sight channel offers unobstructed use of standard-issue iron sights without removing mount. Locks tightly in place with hard-ened steel stud and knurled nut that also allow fast, easy removal and reattachment of mount and attached optics without loss of zero. Positions scope to provide adequate eye relief when wear-ing a protective chemical/biological mask. Standard issue for Israeli Defense Forces, and deployed with the U.S. Armed Forces. NSN #1005-01-534-8696. abSPECS: Machined 6061 T6 aluminum, hardcoat anodized, black, matte finish. 53/8" (13.6cm) long. 2.5 oz. (71g) weight. Made in U.S.A.

SMITH ENTERPRISE AR-15/M16

CARRY HANDLE SCOPE MOUNTLightweight, Streamlined

Quick-Detach Mount Won’t Block Iron Sights

#851-000-071AV Carry Handle Scope Mnt, 1E00ANA � � � $ 77.99

Clamps to the carry handle of an A2-style rifle to allow installation of a scope, holographic red dot sight, or other optic that requires Picatinny receiver rail mounts. Re-moves easily with the optic still attached, so you can quickly switch back to A2 configuration. One-piece, fiberglass-reinforced molded polymer construction is lightweight yet incredibly strong. Installs in seconds and cinches down tight with a steel bolt and easy-to-grip thumb. Sight tunnel under the rail allows continued use of factory iron sights as backups or for close-range shooting. abSPECS: Fiberglass-reinforced molded polymer, black. 51/4" (13.3cm) O.A.L. Fits AR-15/M16 with A2-style carry handle.

TAPCO AR-15/M16

CARRY HANDLE MOUNTFor Easy Mounting Of Optics To

A2 “Carry-Handle” Rifles

#100-004-292AV Carry Handle Mount, 5A12C27 � � � � � � �$ 12.59

These rings are precision machined to true MIL-STD 1913 specs to fit Picatinny-type bases such as Brownells Modular Flattop Riser Mount and Picatinny Scope Bases. No special wrenches needed for installation. Underside of ring is undercut with a rounded radius that offers extra clearance for finger tightening the nut and for final tightening with a standard socket or flat-blade screwdriver. Extra-strong U.S.-size hex nuts have a deep slot that provides maximum engagement of screwdriver blade to help prevent slippage and slot damage—you can even use a U.S. quarter in a pinch. Crossbolt has a square shank that serves as a recoil lug to solidly engage scope base when properly installed to ensure rings won’t shift forward under recoil. Four, strong 6-40 x 1/4" T-15 Torx® head screws securely anchor the ring halves, and large contact area with scope helps prevent slippage even on heavy-recoiling, magnum rifles. Available in 4140 billet steel for superb strength and stability, or aluminum models machined from 6061 T6 billet for reduced weight. Matte black finish blends with most factory rifle and scope finishes. Re-placement nut, crossbolt, and aluminum or steel side locking bars available separately. abSPECS: Rings sold in pairs. Models available to fit 1" and 30mm scope bod-ies. Steel - 4140 billet steel, black, matte, oxide finish. Aluminum - 6061 T6 aluminum billet, hardcoat anodized black, matte. Heights measured from top of base to center of ring: Low - .825" (2.1cm); Med. - 1" (2.5cm); High - 1.125" (2.9cm); Extra-High - 1.375" (3.5cm).

PICATINNY SCOPE RINGSRobust, Versatile, Affordable Rings For Tactical &

Sporting Rifles

#080-000-436AV Low 1" Picatinny Rings, Steel, 8K81I09 � � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 89.99

#080-000-437AV Med 1" Picatinny Rings, Steel, 8K81P06 � � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99

#080-000-438AV High 1" Picatinny Rings, Steel, 8K81B08 � � � � � � � � � � � � � � � � � � � � � � � � � � � 89.99

#080-000-433AV Low 1" Picatinny Rings, Aluminum, 8K65A38 � � � � � � � � � � � � � � � � � � � � � � � � � � � 69.99

#080-000-434AV Med 1" Picatinny Rings, Aluminum, 8K65D37 � � � � � � � � � � � � � � � � � � � � � � � � � � � 69.99

#080-000-435AV High 1" Picatinny Rings, Aluminum, 8K65D37 � � � � � � � � � � � � � � � � � � � � � � � � � � � 69.99

#080-000-811AV Med. 30mm Picatinny Rings, Steel, 8K92G94 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

#080-000-740AV High 30mm Picatinny Rings, Steel, 8K92J94 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

#080-000-741AV Ex-High 30mm Picatinny Rings, Steel, 8K92F47 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

#080-000-810AV Med. 30mm Picatinny Rings, Alum., 8K90P30 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

#080-000-738AV High 30mm Picatinny Rings, Alum., 8K90C30 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

#080-000-739AV Ex-High 30mm Picatinny Rings, Alum., 8K90H30 � � � � � � � � � � � � � � � � � � � � � � � � � � � 99.99

#080-000-708AV Replacement Hex Nut, 8K6H94 � � � � � � 7.99#080-000-709AV Replacement Crossbolt, 8K5K33 � � � � � 5.99#080-000-706AV Replacement Locking Bar, Steel,

8K6D27 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6.99#080-000-707AV Replacement Locking Bar, Alum.,

8K5P35 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5.99

Rugged tactical rings are precision ma-chined to tolerances of .0002" for maximum scope/ring contact to hold scope securely against recoil. Four-screw cap lets you align the reticle, tighten the left side of the cap, then the right side without the scope rotating. Large clamp-nut lets you torque ring to base.

Radiused edges and corners help prevent snagging while provid-ing attractive appearance. TSR - 7075-T6 aluminum, fits MIL-STD 1913 Picatinny base. TSR “W” Series - 1215 alloy steel, fits Weaver bases. 34mm - Accepts Schmidt & Bender-type 34mm scope tubes. Heights in tables below are measured from top of base to center of ring. abSPECS: 5/8" (15.8mm) wide. TSR - 7075-T6 Aluminum black, hard anodized to Mil-A-8625 standards. TSR “W” Series - 1215 alloy steel, Mil-C-13924 oxide finish, matte black.

TSR “W” SERIES STEEL RINGS

STOCK # HEIGHT SIZE PRICE#100-001-403AV Low - 785" 1" 9K79B79 $ 96.99#100-001-404AV Med - 985" 1" 9K79E79 $ 96.99#100-001-405AV High - 1.185" 1" 9K83N11 $ 99.99#100-001-409AV Low - .925" 30mm 9K87Q76 $ 105.99#100-001-410AV Med - 1.075" 30mm 9K87Q76 $ 105.99#100-001-411AV High - 1.225" 30mm 9K90A96 $ 109.99#100-003-300AV Med - 1.185" 34mm 9K119A68 $ 144.99

TACTICAL PRECISION

TSR™ & TSR “W” RINGS

STOCK # HEIGHT SIZE PRICE#100-000-951AV Low - .785" 1" 9K62A63 $ 86.99#100-000-952AV Med - .985" 1" 9K62P63 $ 86.99#100-000-953AV High - 1.185" 1" 9K65J44 $ 90.99#100-000-957AV Low - .925" 30mm 9K66I83 $ 92.99#100-000-958AV Med - 1.075" 30mm 9K66N83 $ 92.99#100-000-959AV High - 1.225" 30mm 9K69I61 $ 96.99

TSR ALUMINUM RINGS

Super Holding Power, Precision Alignment

Vertically split rings, precision-ma-chined from steel barstock, hold large objective, heavy scopes firmly against recoil. Finished to exacting tolerances so the scope returns to zero, even after repeated dismounting and remount-ing. Permanent mount (Perm) uses two socket screws to solidly lock rings to base. Quick detach (QD), double lever rings clamp quickly and tightly; dismount instantly when you lift the lever. Levers can be repositioned so both rest at the same angle. Ultra High rings give correct height for flattop AR-15 and H&K SL7 rifle. abSPECS: Steel, blued, matte finish. Height measured from top of base to bottom of ring saddle. QD: 1" (2.5cm): X-High - .650" (16.5mm) and Ultra-High - .935" (23.7mm); 30mm (1.18"): X-High -.650" and Ultra-High - .850" (21.6mm). Perm: 1" X-High - .650" and 30mm X-High - .650". All models fit Warne Maxima, Weaver, and Picatinny bases.

WARNE

MAGNUM SPECIAL APPLICATION MAXIMA RINGS

Rugged Steel, Close-Tolerance Dovetails For Secure Mounting

STOCK # DIA./HEIGHT TYPE PRICE#947-000-003AV 1"/X-High Perm 7D55E13 $ 61.19#947-000-004AV 1"/X-High QD 7D79F63 $ 88.39#947-000-005AV 1"/Ultra High QD 7D79L63 $ 88.39#947-000-008AV 30mm/X-High Perm 7D55J13 $ 61.19#947-000-009AV 30mm/X-High QD 7D93H33 $ 103.59#947-000-010AV 30mm/Ultra High QD 7D93K33 $ 103.59

AR

-15

/M16

OP

TIC

MO

UN

TS

START EARNING $$Have a web page dedicated to firearms? Become a Brownells

affiliate and earn money!More info can be found at

www.brownells.com

Documents

Orders: 800-741-0015 - Sinclair International