Upload
khangminh22
View
7
Download
0
Embed Size (px)
Citation preview
E TENDER FORM
Name of work:-
SUPPLY OF SPARE PARTS FOR TATA LPO 1512 TC/55 WB DIESEL BS III BUSES OF T.M.T.
Year : 2015-16 (Store & Purchase Department)
Total Cost of Tender form: Rs. 11,346/- (Non Refundable)
THANE MUNICIPAL TRANSPORT Administrative Building. Road No.27 & 34,
Wagle Depot, Wagle Estate, Thane (W) 400 604. E-mail add: [email protected] / [email protected]
Tel.No. 022-25837939
2
THANE MUNICIPAL TRANSPORT UNDERTAKING, THANE
INDEX NAME OF WORK: Supply of Spare Parts for TATA LPO 1512 TC/55 WB Diesel BS III Buses of T.M.T.
Chapter No.
Brief Description of contents Page No.
From To I. Notice Inviting Tender 3 5 II. Detailed Tender Notice 6 11
III. General Conditions of Contract 12 14
IV. Formats 15 18 V. Declaration of Tenderer 19 20 VI. Schedule-B 21 35
Sd/- Transport Manager Thane Municipal Transport Undertaking, Thane
4
Chapter – I THANE MUNICIPAL TRANSPORT UNDERTAKING, THANE.
TENDER NOTICE
Tenders are invited by Thane Municipal Transport Undertaking, (TMT)
Thane, from original manufacturer or there authorized dealer/distributors for Supply of Spare
Parts for TATA LPO 1512 TC/55 WB Diesel BS III Buses of T.M.T. in two envelope system by
“E” Tendering Procedure. Blank tender forms can be downloaded from the websites of
T.M.C. www.thanecity.gov.in OR https://eprocurement.synise.com/tmc
The tenders will be available on www.thanecity.gov.in OR
https://eprocurement.synise.com/tmc websites from dt.06/01/2016 to dt.20/01/2016 up to
16.00 hrs. The tender has to be submitted till dt.20/01/2016 upto 16.00 hrs by 'E' Tendering
procedure and will be opened on dt.20/01/2016 up to 17.00 hrs if possible.
1) Name of work : Supply of Spare Parts for TATA LPO 1512 TC/55 WB
Diesel BS III Buses of T.M.T.
2) Registration : Original Vehicle Manufacturer or his Authorized dealer.
3) Estimated Cost : Rs.2,04,40,000/-
4) Cost of blank tender form : Rs.11,346/- (Non Refundable)
(Cost of Tender form – Rs.10,000/- + Rs.1,250/- (12.5%
Vat ) + Rs.96/- E-tender Department Charges)
5) Earnest Money Deposit (EMD) Rs.2,04,400/-
6) Mode of Payment : Amount Payable In the name of Thane Municipal
Transport Undertaking, Thane A/C No.
320104011026001 Bank Name – Union Bank of India
or Demand Draft drawn on Thane Municipal Transport
Undertaking, Thane.
7) Security deposit : 5 % of the Awarded cost.
8) Tender Validity period - Tender Validity period will be 120 days from the date
of opening of tender.
9) Original Manufacturer or there Authorized dealer/distributors shall submit – Self
attested copy of Document showing –
i) Registration under shop & Establishment Act./Factory license.
ii) Authorized dealer Certificate (Not applicable for Original Manufacturer)
5
iii) Supply of similar items to Govt./Semi Govt./ Municipal Transport
Undertaking/ State Transport Unit Undertakings.
iv) Vat Certificate.
v) Income tax paid for the year 2014-15 or I.T. return certificate
vi) Original manufacturer have to submit Certificate of Tax consultant showing
average annual turnover of last year should not be less than twice the total cost
put to tender of each work. In case of authorized dealer turnover for last year
should be the total cost put to tender of each work.
10) The tender document can be downloaded from the website of T.M.C.,
www.thanemahapalika.com. The applicant has to ensure that all pages are completely
downloaded. In this case, the tenderer has to submit the price of blank tender
document through separate D.D. while submission of tender.
11) Transport Manager, T.M.T., Thane reserves the rights to accept the tender in full or in
part or reject any or all tenders without assigning any reason.
12) If any queries regarding tender contact in the office of Transport Manager T.M.T.
Thane.
Name of Tenderer Signature of Tendere Seal.
Sd/- Transport Manager Thane Municipal Transport Undertaking, Thane
7
CHAPTER – II
Detailed Tender Notice 1. Name of work : Supply of Spare Parts for TATA LPO 1512 TC/55 WB
Diesel BS III Buses of T.M.T. 2. INVITATION : 2.1 Tenders hereunder are being invited in accordance with competitive bidding
procedures of Thane Municipal Transport Undertaking, Thane. 2.2 All bidders are cautioned that tenders containing any deviation from the contractual
terms and conditions specifications or other requirements are liable to be rejected as non-responsive.
2.3 All tenderers should submit a written request in at the office of Transport Manager, Thane Municipal Transport Undertaking, Thane on matters where clarification or additional information is desired well in advance.
2.4 All bidders are requested to quote as per Specification of Supply of Spare Parts given by Thane Municipal Transport Undertaking, Thane.
3. DESCRIPTION OF PROJECT: 1) Name of work : Supply of Spare Parts for TATA LPO 1512 TC/55 WB
Diesel BS III Buses of T.M.T. 3.1 ELIGIBILITY AND QUALIFICATION REQUIREMENTS: Original Manufacturer or there Authorized dealer/distributors shall submit – Self
attested copy of Document showing –
i) Registration under shop & Establishment Act./Factory license.
ii) Authorized dealer Certificate (Not applicable for Original Manufacturer)
iii) Supply of similar items to Govt./Semi Govt./ Municipal Transport
Undertaking/ State Transport Unit Undertakings.
iv) Vat Certificate.
v) Income tax paid for the year 2014-15 or I.T. return certificate
vi) Original manufacturer have to submit Certificate of Tax consultant showing
average annual turnover of last year should not be less than twice the total cost
put to tender of each work. In case of authorized dealer turnover for last year
should be the total cost put to tender of each work.
3.2 ISSUE OF BLANK TENDER FORMS i) Blank tender will be available on website www.thanecity.gov.in OR https://eprocurement.synise.com/tmc ii) All tenders are cautioned that the tenders containing any deviation from the
contractual terms and conditions, specifications and other requirements and conditional tenders will be rejected.
iii) Tender form fee must be submitted in the form of demand draft drawn on any Nationalized or Indian Scheduled bank encashable in Mumbai in the name of Thane Municipal Transport Undertaking, Thane.
8
3.3 PERIOD OF WORK: The period of completion shall be 12 (Twelve) calendar months including monsoon from the date of order to proceed with the work.
3.4 EARNEST MONEY: i) The amount of Earnest Money as 1 % estimated cost of work as mentioned earlier should be in the shape of receipted challan of Union Bank of India payable in A/C No. 320104011026001 or demand draft drawn on any Nationalised or Indian Scheduled bank encashable in Mumbai in the name of Thane Municipal Transport Undertaking, Thane. ii) Earnest Money in the form of Cheque or any other Mode than prescribed above will not be accepted. Tenders of those Tenderers who do not deposit Earnest Money in one of the above-accepted form shall be summarily rejected. Tender not accompanied by an Earnest Money Deposit are liable to be rejected as non-responsive. If during the tender validity period, the tenderer withdraws his tender, the Earnest money deposit shall be forfeited and the tenderer may be disqualified from tendering for further works in the Thane Municipal Transport Undertaking, Thane for the period of three year.
iii) The Earnest Money Deposit will be returned to the unsuccessful tenderers immediately after issue of work order to successful tenderer or at expiry of validity period if tenderer do not wish to extend validity period.
iv) Within ten days from the date of receipt by him of the letter of having acceptance of his tender, the successful tenderer shall furnish the required initial Security Deposit and attend the office of the Transport Manager, Thane Municipal Transport Undertaking, Wagle TMT Depot Thane for execution of the contract document. If the successful tenderer fails to furnish Security Deposit or to execute the contract, his earnest money deposit shall be forfeited and the tenderer may be disqualified from, tendering for further works in the Thane Municipal Transport Undertaking, Thane.
3.5 LANGUAGE OF TENDER: The tenders shall be submitted in the prescribed forms in “English” language only. Language for communication may be Marathi.
3.6 TENDER VALIDITY PERIOD: Validity of the offer will be 120 days from the date of opening of tender price bid (Envelop II) documents. The tender shall Not withdraw his offer within the validity period. If he does so, EMD paid will be absolutely forfeited.
3.7 OPENING OF TENDERS: The Transport Manager, Thane Municipal Transport Undertaking, will open tenders. in E-tender Department, 1st Floor T.M.C., Main administrative building, Chandanwadi, Pachpakhadi, Thane (w) will open tenders. In the presence of tenderers or their representatives of Tenderer who choose to remain present if possible. The tenderer or their representatives, who are present, shall sign the register in token of their attendance.
3.8 WHOM TO CONTACT: The Transport Manager, Thane Municipal Transport Undertaking, Thane may be contacted for any further information on the tender.
3.9 Supplier will have to make an agreement within 7 days of time after acceptance of letter issued to him.
9
3.10 THE TENDER ACCEPTING AUTHORITY: The acceptance of tender vests with the Transport Manager of Thane Municipal Transport Undertaking, Thane who reserves the right to reject any or all tender without assigning any reason thereof. The award of the contract shall be at the discretion of the tender accepting Authority, T.M.T. Also reserved right in case, if felt necessary to make parts / distribute works among other tenderer.
3.11 SECURITY DEPOSIT: The security deposit which is 5 % of accepted tender amount cost for 1 year should be deposited by successful tenderer in form of D.D. in favour of Thane Municipal Transport Undertaking, Thane.
3.12 Refund Security deposit will be returned without interest, after contract is fulfilled by successful tenderer but will however be forfeited by T.M.T. if the tenderer - a) Withdraws his offers after entering into the contract and signing the agreement even after the offer submitted. b) Modifies the delivery period or other conditions of the contract and the agreement.
OR c) Fails to execute the terms and conditions of the contact agreement.
4.0 TENDER DOCUMENTS: 4.1 Contents of Tender Documents A set of tender documents issued for the purpose of tendering shall comprise of
I) Notice Inviting Tender II) Detailed Tender Notice. III) General Conditions of Contract. IV) Formats. V) Declaration of Tenderer. VI) Schedule – B
4.2 The tenderer is deemed to have examined carefully all instructions, conditions, forms, terms, technical specifications, in the tender documents. Failure to comply with the requirements of tender submission shall be at the tenderer’s own risk. Tenders who are not substantially responsive to the requirement of the tender documents are liable to be summarily rejected.
4.3 The tenderer shall submit only an unconditional offer, which complies fully with the requirements of the tender documents.
4.4 All tenderers are cautioned that no alternative or conditional offers, variations or deviations by the tenderers in respect of any item proposed by the tenderers (including advance loan for mobilization for timely completion, etc.) shall be entertained or considered further in the process of tender evaluation.
4.5 The data furnished in the tender documents are only by way of general information and the department will not entertain any claims due to variation from this data or for any expenses incurred by the tenderer in this connection. The tenderer shall himself obtain all necessary information as to risk and costs and other circumstances, which may affect or influence this tender. No extra charges consequent on any misunderstanding or, otherwise shall be allowed.
5. MANNER OF SUBMISSION OF TENDER AND ITS ACCOMPAINMENT: 5.1 Tender is to be submitted in two envelopes System.
10
The tenderer shall submit the following documents in Envelope No.1 (TECHNICAL BID) 5.1.1 Copy of Challan or D.D. of Tender Form fee and Earnest money deposits as specified above in 3.4 5.1.2 Original Manufacturer or there Authorized dealer/distributors shall submit – Self
attested copy of Document showing – i) Registration under shop & Establishment Act./Factory license.
ii) Authorized dealer Certificate (Not applicable for Original Manufacturer) iii) Supply of similar items to Govt./Semi Govt./ Municipal Transport
Undertaking/ State Transport Unit Undertakings. iv) Vat Certificate. v) Income tax paid for the year 2014-15 or I.T. return certificate
vi) Original manufacturer have to submit Certificate of Tax consultant showing average annual turnover of last year should not be less than twice the total cost put to tender of each work. In case of authorized dealer turnover for last year should be the total cost put to tender of each work.
Note: Tenderer should stamp & sign each page of tender document, Scanned copy of all the pages stamped & signed. should be submitted in Env.No.1 which means tenderer agrees, to all terms & conditions etc mentioned in tender document.
5.2 The tenderer shall submit the following documents in Envelope No.2 (PRICE BID) The tenderer should quote his offer as prescribed at appropriate place Schedule –B Chapter No. VI clearly.
5.3 The Transport Manager, Thane Municipal Transport Undertaking, Thane may at his discretion extend the deadline for the submission of tenders by issuing an amendment.
5.4 OPENING OF TENDERS: On due date and specified time following procedure will be adopted for opening of the tender.
5.5 Technical Bid: First Envelope will be opened and all documents including Demand draft of required amount of Tender form fee and Earnest Money OR challan will be verified as per tender requirements. If the required documents do not meet the tender requirements, it will be recorded accordingly by the tender opening authority and the said tenderer’s Price-Bid will not be considered/opened for further action and the reason will be recorded.
5.6 The tenders are liable to reject out right, if while submitting- 5.7 The tenderer proposes any alteration in the work specified in the tender.
5.8 Income Tax & Service tax or any taxes at the rate in force will be recovered from the gross amount of each bill, whether for measured or advance payment of each bill, and/or secured advance.
5.9 The tenderer should quote his rate in percentage above / below of estimated cost of rate per unit. 5.10 i) The Tenderer should particularly note the units on which the rates are
based. In case, any difference noticed in the unit shown in the column of Unit the Tenderer should approach the Transport Manager well in advance before
submission of the tender and get the discrepancy set right. If any discrepancy
11
not pointed out by the Tenderer is noticed, later on the Transport Manager, decision will be final and binding on the tenderer. i i) No addition or alterations in the form of the tender or in the tender and no additions in the shape of special stipulation etc. are permitted. The tenders, which do not fulfill all or any of the above conditions or are incomplete in any respect, are laible for summary rejection. i i i) All pages of tender documents, Conditions, etc. shall be initialed at lower left hand corner and signed where required in the tender papers by the tenderer, all partners in case of partnership firms or person holding a power of attorney authorizing him to sign on behalf of the partnership firms or person holding a power of attorney authorizing him to sign on behalf of the partnership before submission of the tender. iv) The Transport Manager, Thane Municipal Transport Undertaking, Thane shall have the right to revise or to amend the contract documents prior to the date of receipt or opening of the tenders.
6. SCOPE OF WORK Name of work : Supply of Spare Parts for TATA LPO 1512 TC/55 WB Diesel BS III Buses of T.M.T. 7. PENALTY FOR DELAY:-
In any case, delay in supply is not permissible. Delay in supply will be charged as follows and will be recovered through running bills. Sr.No. Total Amount of Work Order Amount of Penalty per day.
1 Up to Rs. 2,000/- Rs. 10/- 2 Rs. 2001 to Rs. 6,000/- Rs. 20/- 3 Rs. 6001 to Rs. 10,000/- Rs. 30/- 4 Rs. 10,001 to Rs. 20,000/- Rs. 40/- 5 Rs. 20,001 to Rs. 50,000/- Rs. 75/- 6 Rs. 50,001 to Rs. 1,00,000/- Rs. 150/- 7 Rs. 100,001 to Rs. 3,00,000/- Rs. 300/-8 Above Rs. 3,00,001 Rs. 500/-
Name of Tenderer Signature of Tendere Seal.
Sd/- Transport Manager Thane Municipal Transport Undertaking, Thane
13
Chapter – III General Conditions of Contract
1) Supplier will have to Supply of material as per Work order as and when asked
within 7 days throughout time limit of contract.
2) Supplier has to supply required material to main stores department Wagle/Kalwa
Depot as per TMTU requirement.
3) Supplier should quote all his rates inclusive of VAT, L.B.T./Octroi and any other
taxes.
4) Supplier has to supply all good quality material. It will be discretionary power of
in charge to accept any items, which he feels not good to use, or of substandard
quality.
5) After work order or purchase order, supplier has to supply required items of
mentioned quantity within 7 days of time.
6) TMTU will not pay any charge/bill on the rejected items.
7) Supplier should immediately take rejected items back within 7 days, else rent at a
rate of Rs. 50/- per day will be charged.
8) Any violation of above condition may lead to termination of contract and
forfeiting of security deposit and blacklisting of agency for next 3 years.
9) In case of discrepancy between rate quoted in figures and words, the lower of the
two will be considered for acceptance of the tender.
10) In all cases of omissions and/or doubts for any items or specification, a reference
shall be made to the Transport Manager, Thane Municipal Transport Undertaking,
Thane whose elucidation, elaboration or decision shall be considered as authentic.
The Tenderer shall be held responsible for any errors that may occur in the work
through lack of such reference and through lack of such precaution.
11) Payments: The supplier must understand clearly that the rates quoted are for
completed work and include all costs due to labour, supervision, transportation
charges, L.B.T./octroi duties, Vat, work contract tax and any other tax as and
when enforced by State/Central Govt. and no claim for additional payment beyond
the prices or rates quoted will be entertained. Supplier should note that after claim
of bill in above respective manner payment will be made positively within 30 to
45 days. No delay in start or continuation of further work shall be accepted due to
lack of fund or delay in payment to the Tenderer.
14
12) Penalty: Performance of subjected work is the essence of contract. Hence, delay in
quality, supply and delivering service is not accepted. TMT will fine as mentioned
in Chapter-II, Penalty for delay.
13) Supplier will have to make agreement with T.M.T. after issue of Intimation letter
of acceptance of tender within 7 days of time.
14) Whatever the rate accepted will be accepted will be fixed and applicable for
complete contract period.
15) Part no. mentioned in the Annexure ‘A’ may get differ from the original part no.
as part list may get revised or whatever the reason, but its tenderer’s responsibility
to check and provide the correct part/material as per requirement of TMTU depot
(Wagle/Kalwa) at his own expense.
Name of Tenderer Signature of Tendere Seal.
Sd/- Transport Manager Thane Municipal Transport Undertaking, Thane
16
FORM NO.1 FORM OF AGREEMENT
THIS AGREEMENT is made on the dt. / /20 between Thane Municipal Transport Undertaking constituted under the BPMC act 1949 Thane hereinafter called "the Employer" of the One Part and M/s. ------------------------------------------------- Registered under the companies act/shop & establishment act having its registered ------------------------------------------------------------------------------------- -----------------."the Contractor" of the other part.
WHEREAS the Employer is desirous that certain works should be executed viz., (Name of the contract) and has accepted a Tender by the Contractor for the execution, completion and guarantee of such works NOW THIS AGREEMENT WITNESSETH as follows :
1) In this Agreement, words and expression shall have the same meaning as are respectively assigned to them in the Conditions of Contract hereinafter referred to.
2) The following documents shall be deemed to form and be read and construed as part of this Agreement, viz.,
a) All tender Documents as issued by the Employer for this work.
b) All amendments to the tender documents as issued by the Employer prior to
submission of the bids.
c) Acceptance letter issued by the Employer vide No. /20 dt. / /20
and all correspondence exchanged between the Employer and the Contractor
upto the date of issue of acceptance letter as specifically referred to in the said
acceptance letter.
3) In consideration of the payment to be made by the Employer to the Contractor as hereinafter mentioned, the Contractor hereby covenants with the Employer to execute and complete the works in conformity in all respects with the provisions of the contract tender document.
4) Indemnity – The Tenderer to keep Thane Municipal Transport Undertaking, Thane indemnified on all these court for the acts done by the tenderers against any claim that may be made against the Thane Municipal Transport Undertaking, Thane by anyone against loss, cost, expenses incurred or suffered by the Thane Municipal Transport Undertaking, Thane by Reason of said agreement
5) Termination – If during the substance of this agreement it is observed or if the Thane Municipal Transport Undertaking, Thane has Reason to believe that the tenderers is not performing as per the terms of these presents, the Thane Municipal Transport Undertaking, Thane shall terminate these presents immediately without giving any notice or opportunity of hearing there of to the tenderer and his security deposit will be forfeited.
6) Force Majeure - Shall include acts of god, civil commotion, strike by Thane Municipal Transport employees, war, earthquake etc. Neither party shall have any liability to the other in respect of the termination of this contract as a result of an event of force majeure
17
7) Arbitration - If any dispute arises during the substance of this contract the Municipal Commissioner of Thane Municipal Corporation will be sole arbitrator and his decision will be final and binding on both the parties. The proceeding shall be as per Arbitration & Conciliation act 1996 at Thane.
8) Royalties etc - All Charges such as sale tax, royalties, octroi, Vat and other duties for materials supply shall be borne by the tenderer. All amounts due to this account shall be paid directly to the authorities concerned by the tenderer or if not paid will be recoverable from the money due to the tenderer if so required by the authorities. The tenderer will not be entitled to any refund on this account.
9) Replacement of defective material - The defective material should be replaced by the tenderer at his own cost. In case Tenderer fails to do so the Thane Municipal Transport Undertaking, Thane may deduct the cost of defective material from the bill of tenderer.
10) Expenses of Stamp duty & registration - for execution of this agreement shall be born by Tenderer.
11) The Employer hereby covenants to pay the Contractor in consideration of the execution, completion, of the Works the contract price at the times and in the manner prescribed by the Contract
IN THE WITNESS WHERE OF THE PARTIES HERE TO HAVE CAUSED THEIR RESPECTIVE COMMON SEALS TO BE HERE UNTO AFFIXED (OR HAVE COMMON SET THEIR RESPECTIVE HANDS AND SEALS) THE DAY AND YEAR FIRST ABOVE WRITTEN.
SIGNED SEALED AND DELIVERED by the said. ----------------------------------------------- ------------------------------------------------- Name --------------------------------------- Name ----------------------------------------- On behalf of Tenderer On behalf of the Employer In presence of in presence of ----------------------------------------------- ------------------------------------------------- Name --------------------------------------- Name ----------------------------------------- Address Address ----------------------------------------------- ------------------------------------------------- ----------------------------------------------- ------------------------------------------------- ----------------------------------------------- ------------------------------------------------- ----------------------------------------------------------------------------------------------------------------
18
Form No. 2 No Demand Certificate
On Tenderer's Letterhead
To, Date _____________ Transport Manager, Thane Municipal Transport Undertaking, Wagle Estate TMT depot, Thane Subject: -... Name of work............................ We hereby confirm and assure in writing that we have no claim/demand of any amount from Thane Municipal Transport Undertaking, in respect of the above said work which was awarded on us vide work order No. ____________ dated _________________. We indemnify Thane Municipal Transport Undertaking, against any claim/demand. Any matter arises in future in respect of this contract from our supplier, sub Tenderers or labours who have contributed their services directly/indirectly for this contract. Authorised Signatory (__________________________Name__________) For _______________________Name of the Agency________
20
CHAPTER V DECLARATION OF THE SUPPLIER
I/We, hereby declare that I/We have made myself/ourself thoroughly conversant with nature of work to be done. & carefully studied and understood by me/us before submitting this tender. I/We undertake to use only the best materials approved by the Transport Manager, Thane Municipal Transport Undertaking, Thane of his duly authorized assistant before starting the work and to abide by his decision. I/We have gone through all general conditions of contract document carefully.
Signature of Supplier.
22
THANE MUNICIPAL TRANSPORT, UNDERTAKING,THANE
Chapter – VI …
SCHEDULE-B PRICE BID
Name of Tender – Supply of Spare Parts for TATA LPO 1512 TC/55 WB
Diesel BS III Buses of T.M.T.
Name of Work :- -------------------------------------------------------------------------------------------
I/We ............................................................................. Hereby agree to execute
the above said supply of spare parts above/below at par in ................. % (percentage) of the
ESTIMATED COST of Rate per unit given by the Department and subject to the
terms and conditions stated in tender documents.
Yours faithfully,
Tendere’s Signature and Seal
with Address.
23
ANNEXTURE ‘A’ ESTIMATED COST OF Rate per Unit
(TATA 1512 CUMMINS ENGINE) Sr.No. Part No. Description
MRP per unit (Rs.)
ENGINE & It's Spares
1 207601000286 6BT CUMMINS ENGINE (130HP)‐24V‐BS3 486575.00
2 T06560000312 LONG BLOCK 1 424415.00
AIR FILTER
1 278609139908 AIR FILTER ELEMENT (PRIMARY) 1535.00
2 278609139909 AIR FILTER ELEMENT (SAFETY) 530.00
3 14280598225 HOSE CLAMP TB146 145.00
4 207609135808 RUBBER HOSE (AT AIR FILTER) 538.00
5 278609135838 RUBBER HOSE (AT TC INTAKE) 439.00
6 14280598209 HOSE CLAMP TB112 100.00
INTERCOOLER AND INTERCOOLER CONNECTION
1 207614609909 INTERCOOLER 20905.00
2 14280599272 HOSE CLAMP SLTB ‐ 72 130.00
3 278614605802 HOSE HUMP 390.00
CYLINDER BLOCK
1 278601990110 CYLINDER BLOCK STD 52000.00
2 278601999902 BUSHING 167.00
3 278601999905 PLUG EXPANSION 71.00
4 278601999916 SLEEVE SALVAGE (STANDARD BORE) 6 REPAIR PURPOSE 655.00
OIL PAN
1 278618999935 PAN OIL 2150.00
FRONT GEAR COVER
1 278607999918 GASKET GEAR HOUSING 340.00
2 278607989922 HOUSING GEAR 22.00
3 278603999931 PIN TIMING 801.00
4 278607999918 GASKET GEAR COVER 340.00
5 278618999965 SEAL OIL 430.00
CYLINDER HEAD
1 278601989906 GASKET, CYLINDER HEAD 1720.00
24
Sr.No. Part No. Description MRP per unit
(Rs.)
2 278601989907 ASSY. CYLINDER HEAD COMPLETE 61610.00
3 278605999966 INSERT,VALVE INTAKE 310.00
4 278605999967 INSERT,VALVE EXHAUST 310.00
5 278605999968 VALVE EXHAUST 280.00
6 278605999969 VALVE,INTAKE 178.00
7 278605999970 COLLET,VALVE 12.00
8 278605999971 RETAINER VALVE SPRING 38.00
9 T06560000242 SPRING VALVE 153.00
10 278605999973 SEAL,VALVE STEM 86.00
11 278605999974 SEAL,VALVE STEM 95.00
VALVE COVER GROUP
1 278601989918 GASKET, VALVE COVER 920.00
2 278601989919 COVER, VALVE 4950.00
3 278601989920 SCREW,CPT ISOLATOR CAP M 8X1.25X95.3 411.00
4 278618999972 ASSY CAP FILLER WITH SEAL O RING 191.00
5 278618999974 SEAL O RING 22.00
INTAKE MANIFOLD
1 278609999937 GASKET INTAKE MANIFOLD COVER 195.00
CAM FOLLOWER COVER
1 278605999906 HOSE PLAIN 180.00
2 278605999901 GASKET PUSH ROD COVER 243.00
OIL FILL LOCATION
1 278601999982 KIT BREATHER CRANKCASE CONSISTING OFF BREATHER CRANKCASE
1045.00
DIPSTICK
1 T06560000190 TUBE, OIL GAUGE 320.00
2 T06560000191 DIPSTICK 330.00
3 278618999967 SEAL 'O' RING 17.00
CRANKSHAFT AND MAIN BEARING
1 278603990147 Assy. CRANKSHAFT 35475.00
2 278601999801 SET OF MAIN BEARING (STD) 970.00
3 278601999802 SET OF MAIN BEARING (RSI) CONSISTING 1080.00
4 278603990106 SET OF MAIN BEARING (RS II) 1175.00
25
Sr.No. Part No. Description MRP per unit
(Rs.)
5 278603990107 SET OF MAIN BEARING (RS III) 1040.00
6 278603999907 SLEEVE WEAR (FRONT) 1 SERVICE PART 4095.00
7 278603999908 SLEEVE WEAR (REAR) 1 SERVICE PART 4205.00
CONNECTING ROD AND PISTON GROUP
1 278603990102 ASSY.CON.ROD 2625.00
2 278603999973 SET OF BARRE PISTON STD CONSISTS OF 9550.00
3 278603999975 SET OF BARE PISTON R/SI CONSISTS 11110.00
4 278603999940 SET OF BARE PISTON R/SII CONSISTS 12295.00
CONNECTING ROD AND PISTON
1 278603999980 SET OF CON. ROD BEARING STD 710.00
2 278613999904 SET OF CON. ROD BEARING R/S I 1135.00
3 278613999903 SET OF CON. ROD BEARING R/S II 1255.00
4 278613999902 SET OF CON. ROD BEARING R/S III 1280.00
5 278615999923 BUSH CON. ROD 137.00
VIBRATION DAMPER
1 T06560000265 DAMPER VIBRATION 2470.00
2 278603999937 SCREW TWELVE POINT CAP M 12X1.25X36 34.00
FLYWHEEL AND FLYWHEEL HOUSING
1 T06560000053 ASSY. FLYWHEEL 9500.00
2 T06560000050 GEAR FLYWHEEL RING 1080.00
3 278603999910 SCREW HEX. HEAD CAP M 12X1.25X32 85.00
4 278603999911 WASHER PLAIN (1.65 THICK, M 12) 10.00
5 278603999918 COVER REAR 800.00
6 278603999922 SCREW HEX. FLANGE HEAD CAP M 12X1.75X40 27.00
CAMSHAFT AND TAPPETS
1 4094069 CAMSHAFT 6035.00
2 278605999910 GEAR CAMSHAFT 2275.00
3 278605999978 TAPPET VALVE 385.00
ROCKER LEVER
1 278605999979 ROD,PUSH 110.00
2 278605999981 ASSEMBLY,ROCKER LEVER 1205.00
FUEL PUMP COUPLING
1 278607989903 BRACE, FUEL PUMP 187.00
26
Sr.No. Part No. Description MRP per unit
(Rs.)
PUMP, FUEL TRANSFER
1 278607989944 TUBE FUEL SUPPLY 275.00
FUEL LINES
1 278607999908 SCREW BANJO CONNECTOR M12X1.5X24 30.00
2 278607999924 WASHER SEALING 12MM 26.00
3 278601989924 TUBE INJECTOR FUEL SUPPLY 5780.00
4 278601989925 TUBE INJECTOR FUEL SUPPLY 5780.00
5 278607989948 TUBE FUEL DRAIN 124.00
6 278607989949 TUBE FUEL DRAIN 127.00
ACCESSORIES FUEL
1 278609999920 STRAINER, FUEL 140.00
INJECTOR
1 278601989921 CONNECTOR,MALE 1735.00
2 278607990137 INJECTOR ASSY. 5160.00
FUEL FILTER
1 278609119904 FILTER FUEL 255.00
2 278609989903 BRACKET,FILTER 192.00
3 4991771 GASKET RECTANGULAR
PLUMBING CPR COOLANT
1 T06560000084 HOSE,PLAIN 445.00
2 T06560000125 HOSE,PLAIN 1235.00
COVER AIR COMPRESSOR
1 278607999994 SCREW TWELVE POINT M 10X1.5X25 11.00
2 278613999906 COVER AIR COMPRESSOR 1927.00
3 278603999951 SEAL O RING 17.00
TURBOCHARGER
1 278614999967 TURBOCHARGER 53035.00
2 TURBOCHARGER CORE
TURBOCHARGER PLUMBING
1 278620999929 HOSE, FLEXIBLE 730.00
2 278601999946 HOSE, PLAIN 230.00
27
Sr.No. Part No. Description MRP per unit
(Rs.)
ALTERNATOR MOUNTING
1 278615996302 BELT V. RIBBED 475.00
2 278615999902 TENSIONER BELT 2135.00
LUBRICATING OIL COOLER/OIL FILTER
1 278618999905 CORE COOLER 4395.00
2 278618999906 GASKET FILTER HEAD 251.00
3 278618999910 GASKET LUB. COOLER 258.00
OIL PUMP
1 278618999913 SCREW HEX. HEAD CAP M 8X1.25X30 7.00
2 278618999933 PUMP LUBRICATING OIL 2925.00
WATER PUMP
1 278620999972 PUMP WATER 3355.00
2 278605999911 SCREW HEX. HEAD CAP M 8X1.25X22 6.00
FAN AND FAN DRIVE
1 278620999901 SCREW H.F.H.C. M8X1.25X40 30.00
2 278620999902 SUPPORT FAN 3755.00
3 207615999902 PULLEY FAN 990.00
4 278620999995 FAN (VISCOUS) 11190.00
ENGINE MOUNTING
1 257624100101 ASSY. RUBBER SUPPORT FRONT 625.00
2 257624200118 ASSY RUBBER SUPPORT REAR 600.00
ACCELERATOR CONTROL
1 283930100106 ASSY PULL ROD(ACC.CONTROL L=885) 217.00
2 277030100117 ASSY PULL ROD (L = 735) 141.00
PROPELLER SHAFT
1 207341100122 ASSY.PROP SHAFT WITH C.B.FRONT (L=1922) 13685.00
2 207341100133 ASSY.PROP SHAFT WITH C.B.MIDDLE (L=1474) 11760.00
3 275041120101 1119 90 DIA ASSY P/SHAFT REAR COMP 20810.00
4 257641120121 ASSY. UNIVERSAL JOIN LONG FORK COMPLETE 6200.00
5 885441211612 ASSY. CROSS KIT CONSISTING 1070.00
EXHAUST SYSTEM
1 216349200112 ASSY EXHAUST PIPE (AT EXHAUST MANIFOLD) 2777.00
28
Sr.No. Part No. Description MRP per unit
(Rs.)
2 216349200118 ASSY EXHAUST PIPE 1672.00
3 276349205301 GASKET 50.00
4 216349100103 ASSY SILENCER WITH PIPE 5945.00
RADIATOR (LPO)
1 207650100164 ASSY.RADIATOR COMPLETE 15655.00
2 278650106951 PIPE (ENGINE OUTLET TO RADIATOR INLET) 158.00
3 207650105861 RUBBER HOSE‐RAD TO ENGINE 391.00
4 278650115804 HOSE (RADIATOR TO WATER PUMP) 506.00
5 207650106927 WATER FILLER PIPE 343.00
6 207650105806 RUBBER HOSE 148.00
7 207650105846 RUBBER HOSE 200.00
8 131550000055 VENT PIPE (RADIATOR TO AUX WATER TANK) 32.00
9 RADIATOR TOP
10 RADIATOR BOTTOM
CLUTCH & CLUTCH SPARE PARTS
CLUTCH 352 DIA
1 275225200106 DRIVEN DISC ASSY. (1.75 MM SPLINE DIA) 5150.00
2 275225400105 COVER ASSY. (1.75 MM SPLINE DIA) 11590.00
3 275425605101 CLUTCH RELEASE YOKE 1525.00
CLUTCH PEDAL
1 278229308701 SPRING (FOR CLUTCH PEDAL RETURN) 40.00
2 275029100102 ASSY.CLUTCH MASTER CYLINDER (19.05 MM DIA) 1075.00
3 275429100106 CLUTCH SLAVE CYLINDER 1000.00
4 209129106003 CLUTCH RELEASE LEVER 475.00
5 216329100106 ASSY. CLUTCH FLUID CONTAINER WITH CLAMP 204.00
6 206029150113 ASSY.CONNECTING LINE 343.00
7 216329150102 ASSY TUBE (CL MASTER CYL TO CL SLAVE CYL) (6 O.D. X 3160 LONG)
222.00
8 269929100177 MAJOR REPAIR KIT, CLUTCH MASTER CYLINDER (BIL) 325.00
9 265129100148 MINOR REPAIR KIT, CLUTCH MASTER CYLINDER (BIL) 120.00
10 265429100157 MAJOR REPAIR KIT, CLUTCH SLAVE 325.00
11 265429100156 MINOR REPAIR KIT, CLUTCH SLAVE CYLINDER (BIL) 235.00
29
Sr.No. Part No. Description MRP per unit
(Rs.)
GEARE BOX & GEAR BOX SPARE PARTS
GEARBOX, HOUSING AND COVERS (G600)
1 269126253704 FRONT COVER (UPPER) 428.00
2 269126303703 FRONT COVER (LOWER) 179.00
3 269126255303 GASKET (FRONT COVER LOWER) 18.00
4 269126203710 REAR COVER (UPPER) 666.00
5 250626207804 OIL SEAL 28.00
6 269126203426 SPEEDO ADAPTOR (REAR COVER UPPER) 244.00
7 269126207910 SPEEDO PINION (REAR COVER UPPER) 234.00
8 266335107207 MAGNETIC DRAIN PLUG 125.00
TOP COVER
1 251626713705 GEAR CASE COVER TOP (UPPER HALF) 1064.00
2 269126707903 SELECTOR & SHIFTER SHAFT (RHD) 660.00
3 250726713105 NEEDLE CAGE 171.00
4 269126715101 SHIFTER FINGER 359.00
5 250526706009 SHIFTING LEVER 510.00
6 13120512409 DOWEL SLEEVE HEAVY 10X40 21.00
7 13120510406 DOWEL SLEEVE HEAVY 6X40 13.00
SHIFTER SHAFT AND FORK
1 269126517907 SHIFTER SHAFT (5TH / 6TH SPEED) 522.00
2 269126515127 SHIFTER FORK (5TH/6TH) 449.00
3 269126517910 SHIFTER SHAFT (3/4 SPEED) 565.00
4 269126515125 SHIFTER FORK (1/2, 3/4 SPEED) 660.00
5 269126517908 SHIFTER SHAFT (1ST /2ND SPEED) 591.00
6 269126517909 SHIFTER SHAFT (REVERSE) 559.00
DRIVE SHAFT
1 269126250126 ASSY DRIVE SHAFT‐(8.47 THRUST BRG.ARRGMT) 6100.00
MAIN SHAFT AND GEARS
1 269126207911 MAIN SHAFT(THRUST BRG.ARRGMT) 6900.00
2 269126200185 ASSY. HELICAL GEAR (2ND SPEED) 5850.00
3 269126203120 NEEDLE CAGE DOUBLE ROW 545.00
4 269126204641 ENGAGING GEAR(1ST/2ND) LOOSE SYN.RING. 2680.00
30
Sr.No. Part No. Description MRP per unit
(Rs.)
5 269126204650 SYNCHRO‐CONE 1/2‐3/4.(CARBON) 2155.00
6 269126204618 SHIFTER SLEEVE (1ST/2ND & 3RD/4TH) 1685.00
7 269126204313 CIRCLIP (2.3 THICK) 1ST SPEED 58.00
8 269126200184 ASSY. GEAR (1ST SPEED) 6886.00
9 269126203111 NEEDLE CAGE 1ST SPEED 522.00
10 269126204616 ENGAGING GEAR (REVERSE) 1225.00
11 269126204301 CIRCLIP (1.8 THICK) 41.00
12 269126203106 NEEDLE CAGE (REV.GEAR) 450.00
13 269126205413 REVERSE GEAR MAIN SHAFT (6 SPEED) 3420.00
MAIN SHAFT AND GEARS
1 269126203103 TAPER ROLLER BEARING 795.00
2 269126207814 OIL SEAL (CR SEALS) 390.00
3 269126200172 ASSY COUPLING FLANGE (130 DIA) 1600.00
4 268826206501 LOCK NUT 238.00
5 269126200186 ASSY. HELICAL GEAR (3RD SPEED) 2150.00
6 269126203142 NEEDLE CAGE 3RD SPEED 490.00
7 269126204642 ENGAGING GEAR(3RD/4TH) LOOSE SYN.RING. 2580.00
8 269126200187 ASSY. HELICAL GEAR (4TH SPEED) 5000.00
9 269126208629 SPACER (M/SHAFT) 285.00
10 269126204306 CIRCLIP (2.4 THK) 41.00
11 269126203144 NEEDLE CAGE 5TH SPEED 390.00
12 269126204651 SYNCHRO‐CONE (5/6 CARBON) 1890.00
13 269126204640 ENGAGING GEAR(5TH/DS)[THRUST BRG.ARRGMT] 2410.00
14 268826204608 SHIFTER SLEEVE 1060.00
15 251526204312 CIRCLIP 2.50 THICK (5TH SPEED) 42.00
16 269126253105 CYLINDRICAL ROLLER THRUST BEARING. 280.00
COUNTER SHAFT, GEARS AND REVERSE IDLER
1 269126307909 COUNTER SHAFT G600 [20MN5CR5] 6000.00
2 269126305424 3RD SPEED GEAR (COUNTER SHAFT) 1670.00
3 269126305425 4TH SPEED GEAR (COUNTER SHAFT) 1810.00
4 269126305410 5TH GEAR (COUNTER SHAFT) 3510.00
5 269126305423 CONSTANT MESH GEAR (COUNTER SHAFT) 2500.00
6 269126303104 TAPER ROLLER BEARING 705.00
31
Sr.No. Part No. Description MRP per unit
(Rs.)
7 269126355403 REVERSE IDLER GEAR 1830.00
8 269126357902 REVERSE IDLER SHAFT 385.00
9 269126358601 SPACER 121.00
10 251626356102 THRUST WASHER (REVERSE IDLER GEAR) 359.00
GEAR SHIFT LINKAGE (COWL VERSION)
1 207326800123 ASSY BRACKET 1894.00
2 257326805101 SELECTOR & SHIFTER YOKE (FULL REMOTE) 850.00
3 275126800134 ASSY GEAR SHIFT LEVER KNOB 130.00
4 219226800104 ASSY SELECTOR SHIFTER FORK WITH G.S.LEVR 1579.00
5 250726700152 ASSY BALL JOINT 390.00
6 250526706009 SHIFTING LEVER 510.00
SUSPENSION (AIR & MANUAL) & Spares
FRONT SPRING (WEWELLER)
1 278032100106 ASSY.FRONT SPRING ‐CO‐DRIVER 16647.00
2 2778832103705 FRONT SPRING BRACKET ‐ LOWER CAP 1295.00
3 277832107701 WEWELLER RUBBER (FRONT SPRING) 415.00
4 277832203702 GUIDE PLATE 316.00
5 257532204204 U‐CLAMP (PARABOLIC) 328.00
6 257532204207 U‐CLAMP (FRONT) 345.00
7 277832207702 RUBBER BUFFER 101.00
FRONT SHOCK ABSORBER
1 277832301602 ASSY.FRONT SHOCK ABSORBER 3105.00
ANTI‐ROLL BAR
1 257632800131 Sub Assy. Antiroll Bar 6192.00
2 257632803402 Bush Half Bottom (Sub Assy Anti Roll Bar to Connecting Link)
120.00
3 257632803403 Bush Half Top (Sub Assy Anti Roll Bar to Connecting Link) 91.00
AIR SUSPENSION REAR
1 277832400178 FRONT AIR SPRING CROSS MEMBER 17839.00
2 277832400148 ASSY RADIUS ROD 10702.00
3 277832400146 ASSY PARALLEL LINK LH 10847.00
4 277832400147 ASSY PARALLEL LINK RH 10847.00
5 278032400114 ASSY AIR SPRING 14235.00
32
Sr.No. Part No. Description MRP per unit
(Rs.)
6 277832900101 ASSY ANTI ROLL BAR REAR 17704.00
7 277832900102 HANGER LINK ASSY 2147.00
8 277832400150 ASSY LELVELLING VALVE MAJOR‐ LH 7309.00
9 277832400151 ASSY LELVELLING VALVE MAJOR‐ RH 7309.00
10 278032600103 ASSY REAR SHOCK ABSORBER 3445.00
11 278032404201 U BOLT REAR M24 X 1.5 X 370MM 1770.00
FRONT AXLE, REAR AXLE, BRAKE etc.. And it's Spares
FRONT AXLE
1 257533200125 ASSY STUB AXLE STD 9750.00
2 257533203401 BUSH (FOR KING PIN) 295.00
3 257633206709 KING PIN STD 820.00
4 3382629 ASSY. BALL JOINT LH 1065.00
5 257533405104 WHEEL HUB (FRONT) W/O BOLTS AND BEARING 6095.00
6 257633403103 TAPER ROLLER BEARING, OUTER 820.00
7 257633403101 TAPER ROLLER BEARING, INNER 1670.00
8 257633408601 SPACER 58.00
9 257633407801 SEALING RING 95.00
10 257333408602 SPACER TUBE 345.00
11 257542303705 BRAKE DRUM SPIGOTTED 8500.00
12 257533409201 THRUST WASHER 200.00
13 257333403703 FRONT HUB COVER 305.00
14 0003300003J TIE ROD REPAIR KIT 810.00
15 885433161612 KING PIN REPAIR KIT WITH MINOR KIT & BUSH STD (38.25MM)
3255.00
FRONT WHEEL BRAKE (S CAM) (BIL)
1 277842130115 LINED SHOE FRONT 2965.00
2 277842133702 TORQUE PLATE LH 4160.00
3 277842133701 TORQUE PLATE RH 4160.00
4 277842135101 ROLLER 542.00
5 257342106724 FULCRUM 165.00
6 257342108704 SPRING (PULL OFF) FULCRUM END 80.00
7 277842135102 CAM SHAFT LH 1548.00
8 277842135103 CAM SHAFT RH 1548.00
33
Sr.No. Part No. Description MRP per unit
(Rs.)
9 257342103405 DELRIN BUSH 60.00
10 257342107801 OIL SEAL 55.00
11 277842138701 SPRING PULL OFF, CAM END 320.00
12 885442011616 WHEEL SET BRAKE LINING FRT STD 1 FOR SELECTION 2216.00
13 885442021616 WHEEL SET BRAKE LINING FRT R/S I 1 FOR SELECTION 2583.00
14 885442031616 WHEEL SET BRAKE LINING FRT R/S II 1 FOR SELECTION 2565.00
REAR AXLE
1 257535600109 ASSY.REAR HUB (W/PINS & OIL CATCHER) 8670.00
2 257635608601 SPACER RING 94.00
3 266835607703 OIL SEAL 120.00
4 257635603101 TAPER ROLLER BEARING (INNER) 3895.00
5 257535603110 TAPER ROLLER BEARING (OUTER) 1455.00
6 263242103702 BRAKE DRUM 410X180 8610.00
7 257535707902 REAR AXLE SHAFT 4050.00
8 257635605301 GASKET (COVER TO HUB) 90.00
9 257635604701 COVER (REAR HUB) 221.00
10 3213530025 THREADED RING (TO DIFFL. BEARING) 221.00
11 266835300106 DIFFERENTIAL ASSY. COMPLETE 19454.00
12 257535300105 DIFFERENTIAL HOUSING ASSY. 8800.00
13 257535305101 DIFFERENTIAL SPIDER 750.00
14 266835305440 DIFFERENTIAL BEVEL GEAR 733.00
15 266835300107 SET OF CROWN WHEEL AND PINION (37/7) 13200.00
16 206035013001 TAPER ROLLER BEARING 1970.00
17 3223530152 SPACER RING 10.28 MM 439.00
18 3273531025 THREADED RING (FOR PINION) 307.00
19 257635305001 COUPLING FLANGE (130 OD) 1075.00
20 0423530172J HEX. NUT (MACHINED) 190.00
21 257335115302 GASKET 150.00
23 257535608607 SPACER TUBE (BETWEEN HUB BEARINGS) 574.00
WHEEL DISC
1 263140100107 ASSY.WHEEL NUT (M22 LENGTH=33) 95.00
BRAKE AGGREGATES
1 278242100106 TYPE 24 BRAKE CHAMBER 3400.00
34
Sr.No. Part No. Description MRP per unit
(Rs.)
2 263243710140 TY24/24 SPRG BRAKE ACT STRGT (OFF) METRIC 5532.00
3 280942300208 ASA M/S.MEI 60 OFFSET,140CD,40 CRANK LH 5320.00
4 280942300206 ASA M/S.MEI,60 OFFSET,140CD,40 CRANK RH 5310.00
5 410243200101 ASSY AIR TANK 30 LIT.(VOSS COMP.) 3262.00
6 257643790159 WATER DRAIN VALVE (BRASS VERSION) 187.00
7 263243700151 HAND BRAKE VALVE(VOSS) 1290.00
8 263243700150 RELAY VALVE(VOSS) 2960.00
9 277843700146 DUAL TREADLE VALVE 4933.00
10 501143700115 NON RETURN VALVE (VOSS & METRIC) 1161.00
11 263243710151 AIR DRYER (8.1BAR‐VOSS) 8130.00
12 263243700148 QUICK RELEASE VALVE WT SILEN (VOSS) 971.00
13 263243710142 FOUR CIRCUIT PROT. VALVE 3561.00
FRONT BRAKE CHAMBER
1 278242100106 BRAKE CHAMBER (TYPE 24) 3400.00
2 257343100115 BRAKE CHAMBER REPAIR KIT 475.00
REAR BRAKE ACTUATOR
1 263243710115 REPAIR KIT SPRING BRAKE ACTUATOR T‐24/24, 1600.00
BRAKE AGGREGATES
1 280942300206 ASA M/S.MEI,60 OFFSET,140CD,40 CRANK RH 5310.00
2 277842300168 MAJOR KIT‐AUTO. SLACK ADJUSTER (HALDEX) 3592.00
RELAY VALVE(ONE DELIVERY PORT PLUG) (SCL)
1 263243700150 RELAY VALVE(VOSS) KB‐K003355 2960.00
2 278243700106 SPARE SPARE KIT RELAY VALVE, 266.00
DUAL BRAKE VALVE (LPO)
1 257643730134 REPAIR KIT FOR DUAL BRAKE VALVE W/O INTEGRAL FILTER
1425.00
HAND BRAKE VALVE
1 263243710101 REPAIR KIT GRADUATED HAND BRAKE VALVE, 796.00
Sr.No. Part No. Description MRP per unit
(Rs.)
FOUR CIRCUIT PROT.VALVE
1 263243710104 MAJOR KIT, FOUR CIRCUIT PROTECTION VALVE 1360.00
2 263243710145 MINOR KIT, FOUR CIRCUIT PROTECTION VALVE 239.00
35
Sr.No. Part No. Description MRP per unit
(Rs.)
STEERING LINKAGES
1 263246207905 STEERING SPINDLE TOP 682.00
2 264046203102 SRDG BEARING 258.00
3 260846000109 ASSY DRAG LINK FRONT 4601.00
4 216346000107 ASSY DRAG LINK REAR 5854.00
5 265146600102 ASSY. U.J. STEERING 1 BET. TOP & MIDDLE SPINDLE 685.00
STEERING LINKAGES
1 257346200108 ASSY. U.J. STEERING (BOTTOM) RANE POWER STG.G BOX 1475.00
PLASTIC HYDRAULIC RESERVOIR
1 278246609901 CARTRIDGE 170.00
POWER STEERING PIPE LINES
1 275446600101 H.STG.PUMP W/O FITTINGS (DIR.DRIVE)‐RPS 19370.00
2 275546604601 COUPLING (DRIVE) 118.00
3 131546800069 ASSY.PIPE (STG PUMP TO POWER STG.TANK) 733.00
4 131546800039 ASSY PIPE FROM STG. PUMP TO STG. G.BOX 934.00
5 131546800068 P/S PIPE (G.B.TO TANK) NIPPLE TYPE 1616 733.00
Name of Tenderer Signature of Tendere Seal.