Upload
khangminh22
View
3
Download
0
Embed Size (px)
Citation preview
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2021-05.
Our Company ...............................................................................................................................................i Our Project Services ......................................................................................................................................iiiTerms & Conditions ......................................................................................................................................v
SECTION 1 DOOR LOCKS
COMMERCIAL LOCKSETS
DOREX F1 Series, Cylindrical, Lever, Grade 1 ............................................................................................01.010
DOREX GX1 Series, Cylindrical, Lever, Grade 1 .........................................................................................01.012
DOREX F Series, Cylindrical, Lever, Grade 2 ..............................................................................................01.020
DOREX T2F Series, Cylindrical, Lever, Grade 2 ..........................................................................................01.021
DOREX E Series, Cylindrical, Lever, Grade 2 ..............................................................................................01.026
DOREX GX1B Series, Cylindrical, Knob, Grade 1 .......................................................................................01.030
DOREX TL Series, Cylindrical, Knob, Grade 2 ............................................................................................01.032
DOREX IL Series, Interconnected, Lever, Grade 2 ......................................................................................01.040
DOREX GX1A Series, Deadbolt, Grade 1 ..................................................................................................01.050
DOREX FHA Series, Deadbolt, Grade 2 .....................................................................................................01.052
DOREX TLA Series, Deadbolt, Grade 2 ......................................................................................................01.054
DOREX DG1 Series, Gate Latch, Grade 1 ..................................................................................................01.060
DOREX DG2 Series, Gate Latch, Grade 2 ..................................................................................................01.062
MORTISE LOCKSETS
DOREX DM Series, Mortise, Grade 1 ........................................................................................................01.070
DOREX DMDB Series, Mortise Deadbolt, Grade 1 .....................................................................................01.072
RESIDENTIAL LOCKSETS
Entry Handlesets .......................................................................................................................................01.200
Levers .......................................................................................................................................................01.240
Knobs .......................................................................................................................................................01.260
Deadbolts .................................................................................................................................................01.280
Pocket Door locks .....................................................................................................................................01.300
ELECTRONIC & COMBINATION LOCKSETS
ER Series, Deadbolt, Electronic Keypad ......................................................................................................01.410
DDL 1150 Series, Lever, Mechanical Keypad ..............................................................................................01.420
DDL 2200 Series, Knob, Mechanical Keypad ..............................................................................................01.422
PATCH FITTING LOCKSETS
PF Series, Patch Fitting, Lever .....................................................................................................................01.500
PF Series, Patch Fitting, Deadbolt ...............................................................................................................01.510
SECTION 2 EXIT DEVICES
PUSH PAD EXIT DEVICES
DOREX DX1 Series, Grade 1 .....................................................................................................................02.010
DOREX 9500 Series, Grade 1 ....................................................................................................................02.020
DOREX 8500 Series, Grade 2 ....................................................................................................................02.030
D8DIVISION8 8000 Series, Grade 2 ..........................................................................................................02.032
DOREX DX2 Series, Narrow Stile, Grade 1 ................................................................................................02.050
1400 Series, Narrow Stile – Mortise ...........................................................................................................02.060
2295 Series, Narrow Stile ..........................................................................................................................02.062
CROSSBAR EXIT DEVICES
DOREX NH900 Series, Grade 2 .................................................................................................................02.100
DOREX 1100 Series, Narrow Stile .............................................................................................................02.110
TABLE OF CONTENTS
R20210708
SECTION 3 DOOR CONTROL
SURFACE DOOR CLOSERS, ADJUSTABLE POWER
DOREX 441HD Series, Heavy-Duty, Grade 1 .............................................................................................03.005
D8DIVISION8 4000 Series ........................................................................................................................03.008
DOREX 1901 Series, Grade 1 ....................................................................................................................03.010
DOREX 1900 Series ..................................................................................................................................03.011
DOREX CCL/5400 Series ...........................................................................................................................03.020
DOREX 1701 Series, Grade 1 ....................................................................................................................03.022
DOREX 1700 Series ..................................................................................................................................03.024
DOREX 1761 Series ..................................................................................................................................03.026
851 Series .................................................................................................................................................03.030
SURFACE DOOR CLOSERS, FIXED POWER
DOREX 700 Series ....................................................................................................................................03.040
D8DIVISION8 60 Series ............................................................................................................................03.042
D8DIVISION8 300 Series ..........................................................................................................................03.044
TC603 Series .............................................................................................................................................03.046
CONCEALED DOOR CLOSERS
DOREX 3000, Concealed in door ..............................................................................................................03.050
DOREX 30, Concealed in transom ............................................................................................................03.052
DOREX 40, Concealed in floor ..................................................................................................................03.054
PERKO, Concealed Door Closers ...............................................................................................................03.056
PF100 Hydraulic Patch Fitting Closer ..........................................................................................................03.060
PF102 Hydraulic Patch Fitting Closer ..........................................................................................................03.062
Auxiliary Door Check ....................................................................................................................................03.072
Overhead Holders & Stops ............................................................................................................................03.100
Door Coordinators ........................................................................................................................................03.200
Electromagnetic Door Holders .......................................................................................................................03.300
SECTION 4 COMMERCIAL & RESIDENTIAL HINGES
COMMERCIAL HINGES
DOREX PRO 179, Full Mortise, Ball Bearing ...............................................................................................04.010
DOREX PRO CB179, Full Mortise, Concealed Ball Bearing .........................................................................04.011
DOREX BB1079, Full Mortise, Ball Bearing ................................................................................................04.016
DOREX PRO 1068, Full Mortise, Heavy Duty, Ball Bearing .........................................................................04.020
DOREX PRO 142, Full Mortise, Plain Bearing .............................................................................................04.030
DOREX PRO B73, Half Surface, Ball Bearing ..............................................................................................04.040
DOREX PRO B77, Half Mortise, Ball Bearing ..............................................................................................04.045
DOREX PRO 148, Swing Clear, Ball Bearing ..............................................................................................04.050
DOREX 1265, Reinforcement Hinge .........................................................................................................04.060
Reinforcement & Filler Plates .....................................................................................................................04.065
DOREX 3310, Single Action Spring Hinge .................................................................................................04.070
BOMMER Spring Hinges ...........................................................................................................................04.075
DOREX 1020, Universal Replacement Hinge .............................................................................................04.080
Residential Hinges .........................................................................................................................................04.100
Continuous Geared Hinges ...........................................................................................................................04.200
Pivots ............................................................................................................................................................04.300
Glass Patch Fittings .......................................................................................................................................04.400
Assorted .......................................................................................................................................................04.500
Specialty .......................................................................................................................................................04.600
TABLE OF CONTENTS
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2021-05.
SECTION 5 SECURITY HARDWARE
PADLOCKS & ACCESSORIES
GUARD Padlocks ......................................................................................................................................05.010
Padlocks ....................................................................................................................................................05.020
VIRO Padlocks ..........................................................................................................................................05.040
Specialty Padlocks .....................................................................................................................................05.060
STOREFRONT HARDWARE
DOREX Mortise Locks ...............................................................................................................................05.200
VIRO Mortise Locks ..................................................................................................................................05.200
Door Handles & Paddles ............................................................................................................................05.240
Electric Strikes ...........................................................................................................................................05.260
LOCK CYLINDERS
Mortise Cylinders ......................................................................................................................................05.400
Rim Cylinders ............................................................................................................................................05.410
Cylinder Trim Rings ...................................................................................................................................05.420
Guards & Latch Protectors .........................................................................................................................05.430
Profile Cylinders ........................................................................................................................................05.440
DOOR SECURITY
Door Viewers ............................................................................................................................................05.600
Door Guards & Chains ..............................................................................................................................05.610
Rim Locks ..................................................................................................................................................05.630
Door Protection .........................................................................................................................................05.640
Assorted Small Locks .....................................................................................................................................05.700
Key Accessories.............................................................................................................................................05.800
SECTION 6 GENERAL HARDWARE
DOOR PULLS, HANDLES & PLATES
Door Pulls .................................................................................................................................................06.010
Flush Pulls .................................................................................................................................................06.020
Edge Pulls .................................................................................................................................................06.030
Multi-purpose Pulls ...................................................................................................................................06.040
Pull Plates ..................................................................................................................................................06.050
Push & Kick Plates .....................................................................................................................................06.060
DOOR STOPS & HOLDERS
Door Stops ................................................................................................................................................06.110
Door Holders .............................................................................................................................................06.150
Check Chains ............................................................................................................................................06.160
DOOR ACCESSORIES
Letter Slots ................................................................................................................................................06.200
Signage .....................................................................................................................................................06.220
HASPS & BOLTS
Flush Bolts .................................................................................................................................................06.300
Surface Bolts .............................................................................................................................................06.320
Tower Bolts ...............................................................................................................................................06.330
Padbolts ....................................................................................................................................................06.340
Safety Hasps .............................................................................................................................................06.350
TRIMMER HARDWARE
Closet Hardware .......................................................................................................................................06.510
Wardrobe Hooks .......................................................................................................................................06.520
Handrail Brackets ......................................................................................................................................06.530
Door Catches & Latches ............................................................................................................................06.540
TABLE OF CONTENTS
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2021-05.
LAVATORY HARDWARE
Lavatory Partition Hardware ......................................................................................................................06.600
CABINET HARDWARE
Magnetic Catches .....................................................................................................................................06.700
Ball & Roller Catches .................................................................................................................................06.710
Reinforcement Hardware ..........................................................................................................................06.740
SLIDING HARDWARE
Sliding Door Hardware ..............................................................................................................................06.810
By-Pass Door Hardware .............................................................................................................................06.820
Bi-fold Door Hardware ..............................................................................................................................06.830
Sliding Tracks ............................................................................................................................................06.840 Accessories ...............................................................................................................................................06.850
WINDOW HARDWARE
Window Hardware ....................................................................................................................................06.900
SECTION 7 APPENDIX
Canaropa has partnered with many quality manufacturers of door hardware from all over the world. Contact your local representative for special orders from these and other fine manufacturers mentioned in our catalogue.
ABH Architectural Door Hardware ............................................................................................................A.030
BOMMER Hinges .....................................................................................................................................A.100
CX5 Security Solutions ..............................................................................................................................A.180
PERKO Concealed Door Hardware ............................................................................................................A.770
SOSS Concealed Hinges ............................................................................................................................A.870
VIRO Security Hardware ...........................................................................................................................A.920
TABLE OF CONTENTS
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2021-05.
i
OUR COMPANY
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-07.
Canaropa is a leading contract manufacturer, importer and distributor of quality commercial, residential and architectural door hardware. The preferred choice of professionals, developers and architects – our products are found throughout North America in private homes, residential developments, offices, commercial and industrial buildings and resorts.
Canaropa offers an extensive selection of reliable, quality door hardware, including door closers, locks, hinges, exit devices, security hardware and more. Coupled with national offices, warehouses, and large inventory, we provide fast and reliable service to our customers from coast to coast.
Since 1954, Canaropa has been focused on delivering the best possible service to its customers. With our dedicated team of experienced door hardware professionals, management and sales teams – we work hard to meet the needs of our customers by developing new products, delivering consulting services and staying current with trends in the market.
Throughout 60+ years in business, Canaropa is grateful to have developed many valued relationships with customers and suppliers alike. Building on this history, we look forward to a future of continued success.
The Door The Door Hardware Hardware ProfessionalsProfessionals
MONTREAL1725 50th AvenueLachine, QC H8T 3C8
t 514.636.6466f 514.636.0961toll free 1.888.636.6466
TORONTO1866 Kipling AvenueToronto, ON M9W 4J1
t 416.241.4445f 416.241.1989toll free 1.800.707.7707
CALGARY3015 16th Street NECalgary, AB T2E 7K8
t 403.250.9333f 403.250.1160toll free 1.877.852.1954
VANCOUVER1851 Brigantine Drive, Unit 200 Coquitlam, BC V3K 7B4
t 604.279.2524f 604.279.0577toll free 1.877.279.2262
Complete Complete Hardware Hardware SolutionsSolutions
With an emphasis on customer With an emphasis on customer satisfaction, we offer more than a satisfaction, we offer more than a complete array of products, but complete array of products, but services that compliment it. services that compliment it.
Our door hardware specialists Our door hardware specialists provide the architectural and provide the architectural and design communities with design communities with responsive, professional and responsive, professional and comprehensive technical, product comprehensive technical, product and project planning support and and project planning support and services. services.
Our complete inventory of Our complete inventory of products and experience means products and experience means that we’re able to deliver complete that we’re able to deliver complete solutions that fit all budget and solutions that fit all budget and building requirements. building requirements.
We’re dedicated to becoming your We’re dedicated to becoming your door hardware partner, we believe door hardware partner, we believe that your success is our success.that your success is our success.
PUBLICENTRY
COMMERCIAL /STOREFRONT
OFFICESPACES
RESIDENTIALINTERIORS
RESIDENTIALSUITE ENTRY
COMMONAREAS
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-02. iii
Our project consultants provide architects, designers and developers comprehensive consultation services for commercial, residential, industrial, institutional, or hybrid projects of all sizes and scopes.
ARCHITECTURAL HARDWARE SPECIFICATIONS• Consultative services with Designers and Owners to establish project
requirements and security coordination.
• Writing, editing and/or converting specifications and hardware schedules.
• Assist in the development and planning of a secure keying system.
GENERAL SERVICES• Project coordination to ensure the smooth running of your projects, our
team works closely with the various internal and external stakeholders involved in the project.
• Budget preparation
• Review substitution requests
• Consult on architectural hardware, doors and frames and glass doors.
• In-house keying services provided by certified locksmiths.
Whether it’s a small residential project or a multi-building development — Canaropa’s hardware professionals can help guide you through the hardware specification process in order to achieve an accurate and compliant door schedule.
Our experienced hardware professionals are happy to help. They are well versed on local and national building codes, the unique needs of various types of facilities and egress requirements.
Take advantage of our experience and product knowledge today.
Project SupportProject SupportServicesServices
Oronoco, Maryland USA
Norfolk, DC USAM1 / M2, Vancouver
Evolo, Montreal
Pusateri's Food Hall, Toronto
Eau du Soleil, Toronto
Genco, Calgary
Verve, Calgary
Griffintown, Montreal
TERMS & CONDITIONS
Note: The words merchandise, item(s), product(s), goods, and stock are used interchangeably and imply that they are regularly stocked.
PRICES Prices are FOB shipping point and may change without notice. Shipment(s) costs will be determined at the time of shipping. Prices quoted for projects are valid for 30 days or as per the date indicated on the written quotation issued by Canaropa.
Whenever possible, Canaropa will provide price protection for orders. All prices are subject to G.S.T. or H.S.T. and/or P.S.T. as applicable and do not include shipping charges.
TERMS OF PAYMENT Unless otherwise specified, terms are "Net 30 Days" from the date of shipment with approved credit only. An administration charge of 2% per month will apply to all overdue accounts. Without approved credit or prepayment, a certified payment must accompany the order. All invoice totals are the legal entitlement of Canaropa until paid.
MINIMUM ORDER Minimum order amounts must be at least $100.00 per invoice net, before taxes.
SHIPPING Please refer to Shipping Policy (Appendix B).
BACKORDERS Stock items on back order will be shipped prepaid as soon as possible, at contracted prices. Items that are unavailable at the time of shipping will be automatically back ordered. If backorders are not required or accepted, it should be specified in the order or on the order confirmation.
CLAIMS Claims for item(s) shipped in error, damaged item(s), item(s) shortages, etc. must be reported within 5 days after receipt of goods.
Claims for labour or unauthorized charges will NOT be accepted
RETURN GOODS POLICY Returns will not be accepted unless a Return Merchandise Authorization Number (RMA#) has been issued. Any request to return goods to Canaropa MUST be in writing with all of the pertinent information provided on the Return Merchandise Authorization form or RMA form. Upon receipt of the completed form and requested information, Canaropa will issue an RMA# and instruction for the return of the goods. All returned merchandise must be unused, in the original packaging, and unmarked. Returned merchandise must be accompanied by a completed RMA form issued by Canaropa; the returned merchandise must be received by Canaropa within 30 days from the invoice date. A restocking fee of 20% or a minimum of $100.00 will be charged on goods returned as "not wanted" or "incorrectly ordered." Canaropa must be informed within 5 days of receipt of goods for an RMA number to be granted for incorrectly ordered or unwanted merchandise. No returns will be accepted after 30 days from RMA issued date. All items returned as defective are subject to inspection. All special (non-stock, or customer specific) item(s) are NON-returnable, NON-refundable, and NON-exchangeable, as per section SPECIAL ORDERS below. If the special item(s) are deemed to be defective and confirmed by Canaropa, they may only be exchanged with the same product. Canaropa's customers are responsible for all return freight charges. However, a credit will be issued for all reasonable and customary freight charges relevant to that item only if the wrong item was shipped by Canaropa. Customer specific item(s) made specifically to customer’s specifications, i.e., custom keying and/or locksmithing work are NON-returnable, NON-refundable and NON-exchangeable.
Canaropa will notify their customers via email, phone or fax of credit once Canaropa receives and processes the returned item(s). Please note that Canaropa will credit reasonable shipping costs only if the return is a result of an error by Canaropa or the warranty claim for the item(s) returned has been accepted. Please allow 10 to 15 business days for processing of the return. If the payment was made by credit card, the credit would be credited to the original credit card account number only. RMA Forms are available on request. Please contact your local Canaropa representative.
SPECIAL ORDERS Special Order Items include all non-stock items and modified items, including all services and item re-configurations, specifically requested or ordered by the customer even if the item is featured in any Canaropa literature or websites. All items determined to be a Special Order, once ordered, can NOT be cancelled and are NON-returnable and NON-refundable. Special Order Items deemed defective by Canaropa will be exchanged for the same product.
OUR COMMITMENT TO QUALITY The quality of all hardware distributed by Canaropa is inspected, reviewed and upgraded on a continuous basis. To maintain our commitment to quality, Canaropa reserves the right to make design and/or technical changes at any time. Specifications for any item may vary from those listed in the catalogue or other publications, and from previous specifications.
WARRANTY AND LIABILITY All Canaropa items are carefully selected and guaranteed to be free from defects in workman-ship, for a maximum period of 1 year or otherwise specified on a per product basis. Other warranties are issued separately for different products from different manufacturers. Our sales department can assist with warranty information for specific products. Our warranty covers free replacement or credit of such warranted items only; in case the warranted product is discontinued a compatible product will be issued. Canaropa cannot guarantee replacement or credit; however, a warranty repair may be given. Any item returned under warranty may be repaired, replaced or credited at the sole and absolute discretion of Canaropa. No Warranty claim will be accepted without an RMA form; the warranty checkbox, on the RMA form, must be selected to indicate that this is a Warranty claim. Canaropa does NOT accept any liabilities for damages and/or labour claims for damage incurred on or as a result of the use or installation of the products and or work done thereto as a result. Canaropa is NOT responsible for improper use of the product beyond the limits for which it was designed; and shall NOT, in any case, be liable for public, incidental or consequential damages of any kind. No other guarantees exist or are otherwise implied.
ACCEPTANCE OF ORDER Canaropa reserves the right to decline an order, in whole or in part, when the price, quantity, or assortments of goods are NOT satisfactory to Canaropa.
FORCE MAJEURE Canaropa is NOT liable for any failure and/or delay in supply or delivery or of any damage or defects to goods supplied or delivered hereunder that is caused by an event or circumstance beyond our reason-able control (including, without limitations, strikes, lockouts and other industrial disputes).
CHANGES TO PRODUCTS Canaropa makes every effort to ensure that product descriptions in our catalogues, brochures, and website are accurate. However, some inaccuracies, typographical errors or misinterpretations may occur. Canaropa reserves the right to correct such inaccuracies or typographical errors as they are identified. All depictions contained in our catalogues, brochures, and website are for illustration purposes only. Because of differences in picture inks, computer monitors, and printer ink, colours of the actual product may vary slightly from those observed in any media format.
DISCLAIMER WARNING Some, or even all data extracted from our catalogues, brochures or product information booklets or sheets, specifications, technical documents or any other source, may NOT accurately depict the product in its latest configuration. Therefore, it is essential and your responsibility to request that the latest revision/configuration of product information is supplied at the time the order is placed.
THE TERMS AND CONDITIONS IN THIS DOCUMENT SUPERSEDE ALL PRIOR WRITTEN OR ORAL COMMUNICATIONS RELATED TO THE PRODUCTS AND SERVICES HEREIN.
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-03. v
SHIPPING POLICY (APPENDIX B)
Unless otherwise stated, all shipments are FOB shipping point. Shipping destinations are expected to have dock level access at a commercial facility, and open to receive freight during normal business hours without appointment. Requests for liftgate service, or other special shipping instructions, must be noted on your purchase order.
COLLECT SHIPMENTS We accept orders to ship via your specified carrier, when accompanied with your carrier account number. Contact our Customer Service department for shipping requirements, or transportation alternatives. For collect shipments, any claims for visible damage, concealed damage, incorrect delivery, or loss of package directly with the carrier.
PREPAY & CHARGE For orders confirmed prepay & charge, the transportation fees are calculated based on actual dimensions, weight, and distance as well as the carrier and shipping service selected by Canaropa. Surcharges may apply.
PREPAID SHIPMENTS Accounts eligible for prepaid shipping are subject to the following conditions:
1. Each order must meet or exceed the minimum order value determined by our Customer Service Department. The minimum order value is based on supplying warehouse, and the ship-to location.
2. Irregular item assortments that are overweight (such as bulk-pack hinges) or oversized (such as track/closet rods) may, at our discretion, be disqualified from prepaid shipping.
3. Surcharges (see below), remain the responsibility of the customer and may be charged on qualifying prepaid shipment orders.
Orders related to warranty claims, errors, or backorders will be prioritized to ship with other goods or shipped prepaid when appropriate.
SURCHARGES Any extra charges incurred for additional services are the responsibility of the customer and may be included on the order invoice or a subsequent invoice. Common shipping surcharges include:
• Liftgate service.
• Delivery Area or Residential surcharges.
• Appointment-based, Call-ahead,
• Construction Site, or Saturday deliveries.
• Additional Handling or Undeliverable package fees.
SHIPMENT VERIFICATION AND INSPECTION
1. VERIFY: Verify the total number of cartons/pallets received matches the carrier’s Bill-of-Lading.
2. INSPECT: Inspect for visible damage looking for cartons with damaged corners, torn or punctured cardboard, and/or pallets with signs of stacking, excessive weight, or forklift damage.
3. DOCUMENT : Document any count or damage concerns on the delivery receipt with notes that are as specific as possible. Take photos where appropriate, and do not discard any damaged products or packaging until directed to do so by Customer Service.
4. REPORT: Report to our Customer Service team any shipping loss or damage within (5) days of receipt of goods. Claims reported after (5) days will be subject-to the Carrier’s bill-of-lading terms, conditions and claim handling policies.
vi VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-03.
Door Handing Guide .....................................................................................................................................ii Finish Guide ..................................................................................................................................................iiAbbreviation Guide .......................................................................................................................................iii Function Guides ............................................................................................................................................iv
COMMERCIAL LOCKSETS
DOREX F1 Series, Cylindrical, Lever, Grade 1 ................................................................................................01.010
DOREX GX1 Series, Cylindrical, Lever, Grade 1 .............................................................................................01.012
DOREX F Series, Cylindrical, Lever, Grade 2 ..................................................................................................01.020
DOREX T2F Series, Cylindrical, Lever, Grade 2 ..............................................................................................01.021
DOREX E Series, Cylindrical, Lever, Grade 2 ..................................................................................................01.026
DOREX GX1B Series, Cylindrical, Knob, Grade 1 ...........................................................................................01.030
DOREX TL Series, Cylindrical, Knob, Grade 2 ................................................................................................01.032
DOREX IL Series, Interconnected, Lever, Grade 2 ..........................................................................................01.040
DOREX GX1A Series, Deadbolt, Grade 1 ......................................................................................................01.050
DOREX FHA Series, Deadbolt, Grade 2 .........................................................................................................01.052
DOREX TLA Series, Deadbolt, Grade 2 ..........................................................................................................01.054
DOREX DG1 Series, Gatelatch, Grade 1 ........................................................................................................01.060
DOREX DG2 Series, Gatelatch, Grade 2 ........................................................................................................01.062
MORTISE LOCKSETS
DOREX DM Series, Mortise, Grade 1 ............................................................................................................01.070
DOREX DMDB Series, Mortise Deadbolt, Grade 1 .........................................................................................01.072
RESIDENTIAL LOCKSETS
Entry Handlesets ...........................................................................................................................................01.205
Levers ...........................................................................................................................................................01.240
Knobs ...........................................................................................................................................................01.265
Deadbolts .....................................................................................................................................................01.280
MISCELLANEOUS LOCKSETS
Pocket Door Locks ........................................................................................................................................01.300
COMBINATION LOCKSETS
ER Series, Deadbolt, Electronic Keypad ..........................................................................................................01.410
DDL 1150 Series, Lever, Mechanical Keypad ..................................................................................................01.420
DDL 2200 Series, Knob, Mechanical Keypad .................................................................................................01.422
PATCH FITTING LOCKSETS
PF Series, Patch Fitting, Lever ........................................................................................................................01.500
PF Series, Patch Fitting, Deadbolt ..................................................................................................................01.510
DOOR LOCKS TABLE OF CONTENTS
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-07.i
R20210616
ii
DOOR LOCKS GENERAL INFORMATION
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-01.
DOOR HANDING GUIDE
LEFT HAND (LH)
LEFT HAND REVERSED (LHR)
RIGHT HAND (RH)
RIGHT HAND REVERSED (RHR)
INTERIOR (INSIDE)INTERIOR (INSIDE)
INTERIOR (INSIDE) INTERIOR (INSIDE)
EXTERIOR (OUTSIDE)
EXTERIOR (OUTSIDE) EXTERIOR (OUTSIDE)
EXTERIOR (OUTSIDE)
ALL FINISHES IMAGES ABOVE ARE PHOTOGRAPHIC OR COLOUR APPROXIMATIONS, DELIVERED PRODUCT MAY VARY. OTHER FINISHES AVAILABLE–PLEASE CONTACT.(*) EQUIVALENT; CODES DIFFER DEPENDING ON BASE MATERIAL (1) OIL RUBBED BRONZE IS A «LIVING FINISH» WHOSE APPEARANCE WILL CHANGE OVER TIME.
POLISHED BRASS POLISHED BRASS (ENDURANCE) SATIN BRASS ANTIQUE BRASS SATIN BRONZECODE BP, C3, 3 V3 C4, 4, SDB AB, C5, 5 C10, 10
BHMA* 605, 632 633 609, 638 639
OIL RUBBED BRONZE1 POLISHED NICKEL SATIN NICKEL ANTIQUE NICKEL MATTE BLACKCODE C10B, 10B C14, 14 SDN, C15, 15 C15A, 15A C19, 19
BHMA* 640 645 619, 646 620, 647 622, 631
DARK BRONZE / DURANODIC POLISHED CHROME SATIN CHROME POLISHED STAINLESS STEEL SATIN STAINLESS STEELCODE BLR, DU, C20D, 20D C26, 26 C26D, 26D C32, 32 SS, C32D, 32D
BHMA* 649, 650, 690 625, 651 626, 652 629 630
FINISH GUIDE
iii
DOOR LOCKS GENERAL INFORMATION
GENERALBS BacksetDIA, ø DiameterKG KilogramsLBS PoundsLH Left handLHR Left hand reversedMAX MaximumMIN MinimumN/A, — Not applicable / Not availableQTY Quantity (usually followed by notes)RH Right handRHR Right hand reversedSQ, SquareWT Weight
/UNIT Number of items per basic unit of sale (bagged or boxed)
/BOX, /BAG Number of UNITS found in an inner carton or bag
/CASE Number of BOXES or UNITS found in an outer (shipping) carton
ABBREVIATION GUIDE
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-01.
FUNCTION DESCRIPTION ANSI INSIDE / OUTSIDE
10 PASSAGE Latch bolt operated by lever from either side. F75
15 EXIT Deadlocking latch bolt operated by inside lever. Blank plate on outside.
—
17
00
SINGLE DUMMY Lever and rose for one side of door to match other locksets. —
32 PATIO Deadlocking latch bolt operated by lever from either side, except when inside push button locks outside lever. Push button released by turning inside lever or closing door to prevent lock-out.
F77
42
40
PRIVACY Latch bolt operated by lever from either side, except when inside push button locks outside lever. Push button released by turning inside lever or closing door to prevent lock-out. Outside lever has provision for emergency unlocking.
F76
51 ENTRY, OFFICE Deadlocking latch bolt operated by lever from either side, except when inside push button locks outside lever. Push button released by turning inside lever or closing door to prevent lock-out. Outside lever is unlocked / locked by key.
—
52 ENTRY Deadlocking latch bolt operated by lever from either side, except when inside button is pushed and turned (with tool) to lock outside lever for entry by key only. Outside lever remains locked until push button is turned.
F109
53 ENTRY Deadlocking latch bolt operated by lever from either side, except when inside button is pushed and turned to lock outside lever for entry by key only. Outside lever remains locked until push button is turned.
F109
60 STORE Deadlocking latch bolt operated by lever from either side. A key used on either side locks or unlocks both sides.
F91
70 CLASSROOM Deadlocking latch bolt operated by lever from either side, except when outside lever is locked by key. Inside lever is always free to allow exit.
F84
72 COMMUNICATING Deadlocking latch bolt operated by lever on either side. Levers are always rigid when locked. Key in either lever locks or unlocks its own lever independently. NOTE: For use in rooms with more than one exit.
F80
75 CLASSROOM
SECURITY
Deadlocking latch bolt operated by lever from either side. Key in either lever locks or unlocks outside lever. Inside lever is always free to allow exit.
F110
79 INSTITUTION EXIT Deadlocking latch bolt operated by inside lever. Locked or unlocked by key from inside lever. Blank plate outside.
—
80 STOREROOM Deadlocking latch bolt operated by inside lever or key in outside lever. Outside lever always rigid.
F86
82 INSTITUTION or
UTILITY
Deadlocking latch bolt operated by key in either side. Both levers always rigid.
F87
94 HOTEL or MOTEL Deadlocking latch bolt operated by inside lever or key in outside lever. Inside push-button prevents use except by emergency key and projects visual occupancy indicator outside. Push-button released by closing door or turning inside knob. Outside lever always rigid.
F93
DOOR LOCKS GENERAL LOCKSET FUNCTION GUIDE
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-06. iv
FUNCTION DESCRIPTION INSIDE / OUTSIDE
42 PRIVACY Deadbolt operated by outside emergency key (or tool) or inside thumb turn at all times.
51 SINGLE CYLINDER Deadbolt operated by outside key or inside thumb turn at all times.
55 ONE SIDED or THUMBTURN ONLY
Deadbolt operated by inside thumb turn only at all times.
57 ONE SIDED, EXTERIOR PLATE or THUMBTURN ONLY, EXTERIOR PLATE
Deadbolt operated by inside thumb turn only at all times. Blank plate on outside.
60 DOUBLE CYLINDER Deadbolt operated by key in either cylinder at all times. NOTE: for use in rooms with more than one exit.
70 SINGLE CYLINDER, CLASSROOM
Deadbolt engaged by outside key only. Inside thumbturn is always free to allow exit.
DOOR LOCKS GENERAL DEADBOLT FUNCTION GUIDE
v VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-06.
FUNCTION DESCRIPTION INSIDE / OUTSIDE
10 PASSAGE Latch bolt operated by lever from either side at all times.
42 PRIVACY Latch bolt operated by lever from either side except when thumb turn projects dead bolt and locks outside lever. Unlock by turning inside lever or by using outside emergency key, which retracts the deadbolt.
45 ENTRANCE Latch bolt operated by lever from either side except when outside lever is locked by push button rocker. Deadbolt projected by outside key and by thumb turn from inside. Deadbolt retracted by outside key. Rotating inside lever retracts both bolts (simultaneous retraction). Auxiliary latch deadlocks latch bolt.
50 OFFICE Latch bolt operated by lever from either side except when outside lever is locked by push button rocker or outside key. Latch bolt may be retracted by outside key or inside lever. Auxiliary latch deadlocks latch bolt.
56 DORMITORY Latch bolt operated by lever from either side or outside key. Deadbolt projected/retracted by key from outside and thumb turn from inside. Rotating inside lever retracts both bolts simultaneously. Extended deadbolt automatically deadlocks latch bolt.
70 CLASSROOM Latch bolt activated by lever from either side, except when outside lever is locked by outside key. Inside lever is always free to allow exit. Auxiliary latch deadlocks latch bolt.
80 STOREROOM Latch bolt operated by outside key or by inside lever. Outside lever is always locked. Auxiliary latch deadlocks latch bolt.
84 STOREROOM WITH DEADBOLT
Dead bolt projected and retracted by outside key or by inside lever or thumb turn. Inside lever retracts both bolts simultaneously. Extended deadbolt automatically deadlocks latch bolt.
171 SINGLE DUMMY Fixed, through-bolt mounted, inside or outside, single lever.*Surface mount available.
172 BACK-TO-BACK DUMMY
Fixed, through-bolt mounted, inside and outside, paired levers.
DOOR LOCKS MORTISE LOCKSET FUNCTION GUIDE
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-01. vi
01.010
F1 S 53 C26D 238SERIES STYLE FUNCTION FINISH OPTION1
(1) OPTION: 238 2-3/8IN (60MM) BACKSET
F1C
F1S
F1H
Type • Cylindrical lock
Certifications • Certified ANSHI/BHMA A156.2, Series 4000, Grade 1
• cULus listed, 3hr fire-rating • UL 10C Positive Pressure Rating• Meets ADA requirements• 5 Year limited warranty
Door Thickness • 133⁄88 – 211⁄44" (35 – 57 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw• Deadlatch, 33⁄44" (19 mm) throw – available
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)
Strike • ASA Strike
Trim • Solid, pressure cast heavy duty lever• Lever secured by additional set screw• Brass rose• Rose diameter: 311⁄22" (89 mm)
Chassis • Concealed mounting plate and screws• Fixed security posts• Lever clutch release
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable• Small format interchangeable core (SFIC) model
– available*
Other keyways and keying options available, including CX5 high security. (*) BEST® and CX5® cores sold separately.
Functions 10 Passage17 Dummy, single42 Privacy
53 Entry70 Classroom80 Storeroom
Lever Styles C–Curved return, H–Standard return, S–Straight; no return
Finish 26D–Satin chrome
Other finishes available by special order
F1 SERIESCOMMERCIAL LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.010 DOREX F1 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
F1001 Passage latch: 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
F1010 Privacy latch: 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
F1005 Deadlatch: 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
F1DL234-34 Deadlatch: 233⁄44" (70 mm) backset,33⁄44" (19 mm) throw111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
SELECTION GUIDE
PARTS & ACCESSORIES
A B C D*
F1 C 311⁄22(89)
411⁄22(114)
211⁄22(63.3)
55⁄88(16)
F1 H 311⁄22(89)
5(127)
211⁄22(63.3)
11⁄22(12.7)
F1 S 311⁄22(89)
5(127)
33⁄44(19)
233⁄1616
(56)IN (MM) (*) DIMENSION MAY VARY DUE TO DOOR THICKNESS.
SERIES STYLE FUNCTION FINISH 1 / CASE
F1 C, H, S 10 Passage 26D 6
F1 C, H, S 17 Dummy, single 26D 12
F1 C, H, S 42 Privacy 26D 6
F1 C, H, S 53 Entry K 26D 6
F1 C, H, S 70 Classroom K 26D 6
F1 C, H, S 80 Storeroom K 26D 6(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED. K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE.
9106 T-Strike, square corners: 111⁄88 x 233⁄44" (28.5 x 70 mm)
9106NH T-Strike, no hole; square corners: 111⁄88 x 233⁄44" (28.5 x 70 mm)
ASA-T ASA strike with adjustable tab
ASANHASA strike, no hole
A
B
D C
A
B
D C
A
B
D C
F1 C F1 H F1 S
GX1L
01.012
Type • Cylindrical lock
Certifications • Conforms to ANSI/NHMA A156.2, Series 4000, Grade 1
• cULus listed, 3hr fire-rating• UL 10C Positive Pressure Rating• Meets ADA requirements • 5 Year limited warranty
Door Thickness • 133⁄88–2" (35–51mm)• SFIC Models: 199⁄1616–2" (40–51mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 333⁄44" (95 mm) – available• 5" (127 mm) – available
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw• Deadlatch, 33⁄44" (19 mm) throw – available
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)
Strike • ASA Strike
Trim • Solid, pressure cast lever• Brass rose• Rose diameter: 399⁄1616" (90 mm)
Chassis • Concealed mounting plate and screws• Fixed security posts• Lever clutch release
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable• Small format interchangeable core (SFIC) model
– available*
Other keyways and keying options available, including CX5 high security. (*) BEST® and CX5® cores sold separately.
Functions 10 Passage15 Exit 17 Dummy, single 42 Privacy53 Entry
60 Store 70 Classroom75 Classroom security80 Storeroom82 Institution
Lever Styles C–Curved return, L–Standard return, S–Straight; no return
Finish C19–Matte black, C26D–Satin chrome
Other finishes available by special order
GX1 SERIESCOMMERCIAL LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
GX1C
GX1S
GX1 L 53 C26D
SERIES STYLE FUNCTION FINISH
01.012 DOREX GX1 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
SELECTION GUIDE
PARTS & ACCESSORIES
9106 T-Strike, square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
9106NH T-Strike, no hole; square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
ASA-T ASA strike with adjustable tab
ASANHASA strike, no hole
9806 CX5 high security SFIC core, 6 pin, 0 bitted
9807 CX5 high security SFIC core, 7 pin, 0 bitted
CBI-BF6KD-26D BEST® F type SFIC core, 6 pin, 0 bitted
CBI-BF7KD-26D BEST® F type SFIC core, 7 pin, 0 bitted
GX1SL238 Passage latch: 233⁄88" (60 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1SL234 Passage latch: 233⁄44" (70 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1PL238 Privacy latch: 233⁄88" (60 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1PL234 Privacy latch: 233⁄44" (70 mm)backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1DL238 Deadlatch: 233⁄88" (60) backset111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1DL234 Deadlatch: 233⁄44" (70 mm) backset 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
GX1DL234-34 Deadlatch: 233⁄44" (70 mm) backset,33⁄44" (19 mm) throw, 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1LE334 Backset extension to 333⁄44" (95 mm); use with 233⁄88" (60 mm) backset latch
GX1LE500 Backset extension to 5" (127 mm); use with 233⁄44" (70 mm) backset latch
SERIES STYLE FUNCTION FINISH 1 / CASE
GX1 C, L, S 10 Passage C26D, C192 6
GX1 L 15 Exit C26D 6
GX1 L 17 Dummy, single C26D, C192 6
GX1 C, L, S 42 Privacy C26D, C192 6
GX1 C, L, S 53 Entry K C26D, C192 6
GX1 C, L, S 53IC Entry SFIC* K C26D, C192 6
GX1 L 60IC Store SFIC* K C26D 6
GX1 C, L, S 70 Classroom K C26D, C192 6
GX1 C, L, S 70IC Classroom SFIC* K C26D, C192 6
GX1 L 75Classroom security K
C26D 6
GX1 L 75ICClassroom security SFIC* K
C26D 6
GX1 C, L, S 80 Storeroom K C26D, C192 6
GX1 C, L, S 80IC Storeroom SFIC* K C26D, C192 6
GX1 L 82 Institution K C26D 6(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED. (2) GX1L ONLY (*) ALL SFIC MODELS ARE LESS CORE K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE.
A B C D*
GX1 C399⁄1616
(90) 5
(127)211⁄22
(63.3)33⁄88
(10)
GX1 L399⁄1616
(90) 5
(127)255⁄88
(66.7)
33⁄88(10)
GX1 S399⁄1616
(90) 5
(127)77⁄88
(22)277⁄1616
(62)
IN (MM) (*) DIMENSION MAY VARY DUE TO DOOR THICKNESS.
A
B
D C
A
B
D C
A
B
D C
GX1 C GX1 L GX1 S
Type • Cylindrical lock
Certifications • Certifed ANSI/BHMA A156.2, Series 4000, Grade 2
• cULus listed, 3hr fire-rating • UL 10C Positive Pressure Rating• Meets ADA requirements• 1 Year limited warranty
Door Thickness • 133⁄88 – 133⁄44" (35 – 44.5 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 333⁄44" (95 mm) – available• 5" (127 mm) – available
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)
Strike • ASA Strike
Trim • Solid, pressure cast lever• Brass rose • Rose diameter: 355⁄1616" (84.5 mm)
Chassis • Concealed mounting plate and screws• Removable security posts• Lever clutch release – option
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable
Other keyways and keying options available, including CX5 high security
Functions 10 Passage15 Exit17 Dummy, single42 Privacy51 Office
53 Entry*60 Store70 Classroom80 Storeroom*82 Institution
(*) Lever clutch release available (-0)
Lever Styles C–Curved return, H–Standard return, S–Straight; no return
Finish C26D–Satin chrome, C3–Polished brass
Other finishes available by special order
01.020
F H 53 C26D –OSERIES STYLE FUNCTION FINISH OPTION1
(1) OPTIONS: 238 2-3/8IN (60MM) BACKSET -O LEVER CLUTCH RELEASE (53 & 80 ONLY)
FC
FS
FH
F SERIESCOMMERCIAL LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.020 DOREX F
SELECTION GUIDE
PARTS & ACCESSORIES
A B C D*
FC 3 55⁄1616
(84.5) 411⁄22
(114)177⁄88(48)
11⁄22(12.7)
FH 3 55⁄1616
(84.5)411⁄22
(114)177⁄88(48)
11⁄22(12.7)
FS 3 55⁄1616
(84.5)41111⁄1616
(119) 99⁄1616
(14)12727⁄3232
(46.8)IN (MM) (*) DIMENSION MAY VARY DUE TO DOOR THICKNESS.
SERIES STYLE FUNCTION FINISH1 / CASE
F C, H, S 10 Passage C26D, C3 12
F C, H, S 15 Exit C26D 12
F C, H, S 17 Dummy, single C26D, C3 40
F C, H, S 42 Privacy C26D, C3 12
F C, H, S 51 Office K C26D 12
F C, H, S 53 Entry K C26D, C3 12
F C, H 53-O Entry, with clutch release K C26D 12
F C, H, S 60 Store K C26D 12
F C, H, S 70 Classroom K C26D, C3 12
F C, H, S 80 Storeroom K C26D, C3 12
F C, H 80-O Storeroom, with clutch release K C26D 12
F C, H, S 82 Institution / utility K C26D 12(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE (1) NOTE: IN-STOCK FS LEVERS ARE ONLY AVAILABLE IN C26D
9106 T-Strike, square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
9106NH T-Strike, no hole; square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
ASA-T ASA strike with adjustable tab
ASANHASA strike, no hole
TL013 Backset extension to 333⁄44" (95 mm); Use with 233⁄88" (60 mm) backset latch
TL014 Backset extension to 5" (127 mm); Use with 233⁄44" (70 mm) backset latch
FH001 Passage latch: 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
FH003 Passage latch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
FH010 Privacy latch: 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
FH002 Privacy latch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
FH005 Deadlatch: 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
FH004 Deadlatch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
A
B
D C
A
B
D C
A
B
D C
FC FH FS
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.021
T2 F 53 – 26DSERIES STYLE FUNCTION FINISH
Type • Cylindrical lock
Certifications • Conforms to ANSI/BHMA A156.2, Series 4000, Grade 2
• cULus listed, 3hr fire-rating • UL 10C Positive Pressure Rating• Meets ADA requirements• 1 Year limited warranty
Door Thickness • 133⁄88 – 2" (35 – 51 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 333⁄44" (95 mm) – available• 5" (127 mm) – available
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)
Strike • ASA Strike
Trim • Solid, pressure cast lever• Brass rose• Rose diameter: 355⁄1616" (84.5 mm)
Chassis • Concealed mounting plate and screws• Removable security posts
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable
Other keyways and keying options available, including CX5 high security
Functions 00 Dummy, single10 Passage40 Privacy
53 Entry70 Classroom80 Storeroom
Lever Styles F–The Flat
Finish 15–Satin nickel, 19–Matte black, 26D–Satin chrome
Other finishes available by special order
T2 SERIESCOMMERCIAL LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.021 DOREX T2F
SELECTION GUIDE
A B C D*
T2 F 3 55⁄1616
(84.5) 477⁄3232
(107)55⁄88
(16.7)2
(51.3)IN (MM) (*) DIMENSION MAY VARY DUE TO DOOR THICKNESS.
SERIES STYLE FUNCTION FINISH1 / CASE
T2 F 00 Dummy, single 15, 19, 26D 12
T2 F 10 Passage 15, 19, 26D 6
T2 F 40 Privacy, push button thumb-turn 15, 19, 26D 6
T2 F 53 Entry K 15, 19, 26D 6
T2 F 70 Classroom K 15, 19, 26D 6
T2 F 80 Storeroom K 15, 19, 26D 6(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
A
B
D C
T2 F
PARTS & ACCESSORIES
9106 T-Strike, square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
9106NH T-Strike, no hole; square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
ASA-T ASA strike with adjustable tab
ASANHASA strike, no hole
TL020 Plastic spacer for latches with 1x 211⁄44" (25.4 x 57 mm) faceplate
TL013 Backset extension to 333⁄44" (95 mm); Use with 233⁄88" (60 mm) backset latch
TL014 Backset extension to 5" (127 mm); Use with 233⁄44" (70 mm) backset latch
TL001 Passage latch: 233⁄88" (60 mm) backset 1 x 211⁄44 " (25.4 x 57 mm) faceplate
TL003 Passage latch: 233⁄44" (70 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
TL010 Privacy latch: 233⁄88" (60 mm) backset 1 x 211⁄44 " (25.4 x 57 mm) faceplate
TL002 Privacy latch: 233⁄44" (70 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
TL005 Deadlatch: 233⁄88" (60 mm) backset, 1x 211⁄44" (25.4 x 57 mm) faceplate
TL004 Deadlatch: 233⁄44" (70 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
TL006 Deadlatch: 5" (127 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.026
E M 53 C15 238SERIES STYLE FUNCTION FINISH OPTION1
(1) OPTIONS: 238 2-3/8IN (60MM) BACKSET
EL
EM
Type • Cylindrical lock
Certifications • Conforms to ANSI/BHMA A156.2, Series 4000, Grade 2
• cULus listed, 3hr fire-rating • UL 10C Positive Pressure Rating• Meets ADA requirements• 1 Year limited warranty
Door Thickness • 133⁄88 – 133⁄44" (35 – 44.5 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 333⁄44" (95 mm) – available• 5" (127 mm) – available
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)• 233⁄88" (60 mm) backset: 1 x 211⁄44" (25.4 x 57 mm)
Strike • ASA Strike
Trim • Solid, pressure cast lever• Brass rose• Rose diameter: 3" (76 mm)
Chassis • Concealed mounting plate and screws• Removable security posts
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable
Other keyways and keying options available, including CX5 high security
Functions 10 Passage15 Exit*17 Dummy, single42 Privacy52 Entry*53 Entry
60 Store*70 Classroom79 Institution exit*80 Storeroom82 Institution*
*EM Lever only – see selection guide
Lever Styles L–Short lever, return, M–Standard, return
Finish C15–Satin nickelC3–Polished brass
Other finishes available by special order
E SERIESCOMMERCIAL LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.026 DOREX E ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
SELECTION GUIDE
A B C D*
EL 3(76)
333⁄88(86)
177⁄88(48)
77⁄1616
(11)
EM 3(76)
4(102)
177⁄88(48)
77⁄1616
(11)IN (MM) (*) DIMENSION MAY VARY DUE TO DOOR THICKNESS.
SERIES FUNCTION FINISH 1 / CASE
EL 10 Passage C15 10
EL 17 Dummy, single C15 20
EL 42 Privacy C15 10
EL 53 Entry, locking thumb-turn push button K C15 10
EL 70 Classroom K C15 10
EL 80 Storeroom K C15 10
EM 10 Passage C15, C3 10
EM 15 Exit C15 10
EM 17 Dummy, single C15, C3 20
EM 42 Privacy C15, C3 10
EM 52 Entry, locking slotted push button K C15, C3 10
EM 53 Entry, locking thumb-turn push button K C15, C3 10
EM 53LC Entry, less core K C15, C3 10
EM 60 Store K C15 10
EM 70 Classroom K C15, C3 10
EM 79 Institution exit K C15 10
EM 80 Storeroom K C15, C3 10
EM 82 Institution K C15 10(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
A
B
C
A
B
EL EM
PARTS & ACCESSORIES
9106 T-Strike, square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
9106NH T-Strike, no hole; square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
ASA-T ASA Strike, adjustable tab; square corners
ASANHASA T-Strike, no hole; square corners
TL020 Plastic spacer for latches with 1x 211⁄44" (25.4 x 57 mm) faceplate
TL013Backset extension to 333⁄44" (95 mm); Use with 233⁄88" (60 mm) backset latch
TL014 Backset extension to 5" (127 mm); Use with 233⁄44" (70 mm) backset latch
TL001 Passage latch: 233⁄88" (60 mm) backset, 1x 211⁄44" (25.4 x 57 mm) faceplate
TL003 Passage latch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
TL010 Privacy latch: 233⁄88" (60 mm) backset, 1x 211⁄44" (25.4 x 57 mm) faceplate
TL002 Privacy latch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
TL005Deadlatch 233⁄88" (60 mm) backset 1x 211⁄44" (25.4 x 57 mm) faceplate
TL004 Deadlatch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
D
CD
01.030
GX1B 53 C32DSERIES FUNCTION FINISH
Type • Cylindrical lock
Certifications • Conforms to ANSI/BHMA A156.2, Series 4000, Grade 1
• cULus listed, 3hr fire-rating• UL 10C Positive Pressure Rating• 5 Year limited warranty
Door Thickness • 133⁄88–2" (35–51 mm)• SFIC models: 199⁄1616–2" (40–51 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 333⁄44" (95 mm) – available• 5" (127 mm) – available
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw• Deadlatch, 33⁄44" (19 mm) throw – available
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)
Strike • ASA Strike
Trim • Stainless steel knob• Stainless steel rose• Rose diameter: 21515⁄1616" (74.6 mm)
Chassis • Concealed mounting plate and screws• Removable security posts
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable• Small format interchangeable core (SFIC) model
– available*
Other keyways and keying options available, including CX5 high security. (*) BEST® and CX5® cores sold separately.
Functions 10 Passage42 Privacy53 Entry 60 Store
70 Classroom80 Storeroom
Finish C32D–Stainless steel
Other finishes available by special order
GX1B SERIESCOMMERCIAL LOCK
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.030 DOREX GX1B ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
SELECTION GUIDE
A B C D*
GX1 B21515⁄1616
(74.6) 211⁄44(57)
1313⁄1616
(21)255⁄88–3
(67–76)IN (MM) (*) DIMENSION MAY VARY DUE TO DOOR THICKNESS.
A B
D
C
SERIES FUNCTION FINISH 1 / CASE
GX1 B 10 Passage C32D 6
GX1 B 42 Privacy C32D 6
GX1 B 53 Entry K C32D 6
GX1 B 53IC Entry SFIC, less core K C32D 6
GX1 B 60 Store K C32D 6
GX1 B 60IC Store SFIC, less core K C32D 6
GX1 B 70 Classroom K C32D 6
GX1 B 70IC Classroom SFIC, less core K C32D 6
GX1 B 80 Storeroom K C32D 6
GX1 B 80IC Storeroom SFIC, less core K C32D 6(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
PARTS & ACCESSORIES
9106 T-Strike, square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
9106NH T-Strike, no hole; square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
ASA-T ASA strike with adjustable tab
ASANHASA strike, no hole
9806 CX5 high security SFIC core, 6 pin, 0 bitted
9807 CX5 high security SFIC core, 7 pin, 0 bitted
CX5-TPICB Tailpiece for use with CX5 SFIC cores
CBI-BF6KD-26D BEST® F type SFIC core, 6 pin, 0 bitted
CBI-BF7KD-26D BEST® F type SFIC core, 7 pin, 0 bitted
GX1SL238 Passage latch: 233⁄88" (60 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1SL234 Passage latch: 233⁄44" (70 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1PL238 Privacy latch: 233⁄88" (60 mm) backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1PL234 Privacy latch: 233⁄44" (70 mm)backset 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1DL238 Deadlatch: 233⁄88" (60) backset111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1DL234 Deadlatch: 233⁄44" (70 mm) backset 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
GX1DL234-34 Deadlatch: 233⁄44" (70 mm) backset,33⁄44" (19 mm) throw, 111⁄88 x 211⁄44 " (28.5 x 57 mm) faceplate
GX1LE334 Backset extension to 333⁄44" (95 mm); use with 233⁄88" (60 mm) backset latch
GX1LE500 Backset extension to 5" (127 mm); use with 233⁄44" (70 mm) backset latch
01.032
TL 53 B C32D 238SERIES FUNCTION STYLE FINISH OPTION1
(1) OPTION: 238 2-3/8IN (60MM) BACKSET LC–LESS CORE (53 & 80)
Type • Cylindrical lock
Certifications • Conforms to ANSI/BHMA A156.2, Series 4000, Grade 2
• cULus listed, 3hr fire-rating• UL 10C Positive Pressure Rating• 1 Year limited warranty
Door Thickness • 133⁄88–133⁄44" (35–44.5 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 333⁄44" (95 mm) – available• 5" (127 mm) – available
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)• 233⁄88" (60 mm) backset : 1 x 211⁄44" (25.4 x 57mm)
Strike • ASA Strike
Trim • Brass or stainless steel knob*• Brass or stainless steel rose*• Rose diameter: 3" (76 mm)
(*) Material dependant on finish.
Chassis • Concealed mounting plate and screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable
Other keyways and keying options available, including CX5 high security
Functions 10 Passage15 Exit17 Dummy, single32 Patio42 Privacy53 Entry*
60 Store70 Classroom79 Institution exit80 Storeroom*82 Institution / utility94 Hotel / motel
(*) Available without core cylinder (LC)
Finish C3–Polished brass, C32D–Stainless steel
Other finishes available by special order
TL SERIESCOMMERCIAL LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.032 DOREX TL ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
SELECTION GUIDE
A B C
TL B 3(76)
211⁄88(57)
255⁄88(67)
IN (MM)
SERIES FUNCTION STYLE FINISH 1 / CASE
TL 10 Passage B C3, C32D 20
TL 15 Exit B C3, C32D 20
TL 17 Dummy, single B C3, C32D 40
TL 32 Patio (includes full-lip D-Strike) B C3, C32D 20
TL 42 Privacy B C3, C32D 20
TL 53 Entry K B C3, C32D 20
TL 53 LC Entry, housing only (less core) K B C32D 20
TL 60 Store K B C3, C32D 20
TL 70 Classroom K B C3, C32D 20
TL 79 Institution / exit K B C32D 20
TL 80 Storeroom K B C3, C32D 20
TL 80 LC Storeroom, housing only (less core) K B C32D 20
TL 82 Institution / utility K B C32D 20
TL 94 Hotel K B C3, C32D 20(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
PARTS & ACCESSORIES
9102 Full lip D-Strike, adjustable tab; square corners: 133⁄44 x 211⁄44" (44.5 x 57 mm)
9106 T-Strike, square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
9106NH T-Strike, no hole; square corners: 111⁄88 x 2 33⁄44" (28.5 x 70 mm)
ASA-T ASA strike, adjustable tab; square corners
ASANHASA strike, no hole; square corners
TL020 Plastic spacer for latches with 1x 211⁄44" (25.4 x 57 mm) faceplate
TL001 Passage latch: 233⁄88" (60 mm) backset, 1x 211⁄44" (25.4 x 57 mm) faceplate
TL003 Passage latch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
TL010 Privacy latch: 233⁄88" (60 mm) backset, 1x 211⁄44" (25.4 x 57 mm) faceplate
TL002 Privacy latch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
TL005Deadlatch: 233⁄88" (60 mm) backset, 1x 211⁄44" (25.4 x 57 mm) faceplate
TL004 Deadlatch: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
TL013Backset extension to 333⁄44" (95 mm); Use with 233⁄88" (60 mm) backset latch
TL014 Backset extension to 5" (127 mm); Use with 233⁄44" (70 mm) backset latch
A B
C
01.040
IL 10 EM C15 KD S 238SERIES FUNCTION STYLE FINISH KEYING TRIM OPTION1
(1) OPTIONS: 238 2-3/8IN (60MM) BACKSET
IL SERIESINTERCONNECTED LOCKSET
Type • Interconnected cylindrical lock
Certifications • Conforms to ANSI/BHMA A156.12, Grade 2• cULus listed, 3 hour fire-rating• UL10C Positive Pressure Rating• Meets ADA requirements• 1 Year limited warranty
Door Thickness • 133⁄88 – 133⁄44" (35 –44.5 mm)
Handing • Non handed
Backset • 233⁄44" ( 70 mm) • 233⁄88" (60 mm) – available
Spring Latch • Stainless steel• 11⁄22" (12.7 mm) throw
Deadbolt • Solid brass with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (28.5 x 57 mm)
Strikes • T-Strike: 111⁄88 x 233⁄44" (28.5 x 70 mm) • Deadbolt strike: 111⁄88 x 233⁄44" (28.5 x 70 mm) • Plastic dust-boxes
Interior Escutcheon
• Square (S): 8 x 3 11⁄88" (203 x 79 mm)• Round (R): 8 77⁄88 x 3 11⁄88" (225 x 79 mm)
Exterior Escutcheon
• Square: 8 x 3 11⁄88" (203 x 79 mm)• Round: 8 77⁄88 x 3 11⁄88" (225 x 79 mm)
Not included, sold separately
Chassis • Free-spinning deadbolt cylinder collar• Steel deadbolt cylinder housing• Exposed mounting screws• Single action egress
Preparation • 4" (102 mm ) centre-to-centre installation• Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable
Other keyways and keying options available, including CX5 high security
Functions 10 Passage, single lock80 Storeroom, double lock
Lever Styles EM–Standard return, V–Verona
Other lever styles available by special order
Finish C15–Satin nickel Other finishes available by special order
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-10.
IL80EMC15KDS shown, Storeroom, double lock
01.040 DOREX IL ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-10.
SELECTION GUIDE
PARTS & ACCESSORIES
ILPRC15Exterior escutcheon, round 877⁄88 x 311⁄88 x 77⁄1616" (225 x 79 x11 mm) Not included
A B C D E F G H* K* M P
IL REM 8 77⁄88
(225.4)3 11⁄88(79)
4 (101.6)
111⁄1616
(27)2 99⁄1616 (65)
1 11⁄1616 (27.2)
2 99⁄1616 (65)
2 55⁄16 16 (59) 33⁄88 (9.5) 4 (102) 2 99⁄1616 (65)V 2 99⁄1616 (65) 1 33⁄88 (35) 4 33⁄1616 (106)
IL S EM 8(203.2)
3 11⁄88(79)
4 (101.6)
111⁄1616
(27)2 11⁄88(54)
1 11⁄1616 (27.2)
2 99⁄1616 (65)
2 55⁄16 16
(59)33⁄88
(9.5)4
(102)2 99⁄1616 (65)
IN (MM) (*) DIMENSION MAY VARY DUE TO DOOR THICKNESS NOTE: EXTERIOR ESCUTCHEON PLATES ARE THE SAME SIZE AS THE INTERIOR ONES (SOLD SEPARATELY)
SERIES FUNCTION LEVER INTERIOR TRIM FINISH / CASE
IL 10 Passage, single lock entry K EM, V R, S C15 10
IL 80 Storeroom, double lock entry K EM S C15 10OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED EXTERIOR ESCUTCHEON SOLD SEPARATELY K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
A A
B B
CE
D
F
G
H H
K K
M M
P
IL S IL R
EM V
ILPSC15Exterior escutcheon, square 8 x 311⁄88 x 77⁄1616" (203 x 79 x11 mm) Not included
01.050
GX1A 51 C26D LCSERIES FUNCTION FINISH OPTION1
(1) OPTIONS: 238-2 3/8IN (60MM) BACKSET LC-LESS CORE (51 ONLY) WEI-WEISER KEYWAY
GX1A SERIESCOMMERCIAL DEADBOLT
Certifications • Conforms to ANSI/BHMA A156.5, Grade 1• cULus listed, 3hr fire-rating • 5 Year limited warranty
Door Thickness • 199⁄1616 – 2" (40 – 51 mm)• Kit for 211⁄44" (57 mm) – available
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 5" (127 mm) – available
Deadbolt • Solid brass with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (29 x 57 mm)
Strikes • Wood & steel frame strikes; square corners• 111⁄88 x 233⁄44" (29 x 70 mm)• Plastic dust-box
Other strikes available
Chassis • Free-spinning cylinder collar• Steel cylinder housing• Concealed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable• Small format interchangeable core (SFIC) model
– available*
Other keyways and keying options available, including CX5 high security. (*) BEST® and CX5® cores sold separately.
Functions 51 Single cylinder, thumb-turn60 Double cylinder70 Single cylinder, thumb-turn (Classroom)
Less Core (LC) available – see selection guide
Finish C15–Satin nickel, C15A–Antique nickel, C26D–Satin chrome, C3–Polished brass, V3–Polished brass (Endurance)
Other finishes available by special order
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.050 DOREX GX1A ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
SELECTION GUIDE
PARTS & ACCESSORIES
SERIES FUNCTION FINISH 1 / CASE
GX1 A 51 Single cylinder, thumb-turn K C15, C15A, C26D, C3, C5, V3 12
GX1 A 51 LC Single cylinder, thumb-turn, less core K C26D 12
GX1 A 51 WEI Single cylinder, thumb-turn, 5-pin Weiser keyway K C26D, C3, C5 12
GX1 A 51 IC Single cylinder SFIC, thumb-turn, 7-pin BEST® F core included K C15, C26D 12
GX1 A 60 Double cylinder K C26D 12
GX1 A 60 IC Double cylinder SFIC, 7-pin BEST® F core included K C26D 12
GX1 A 70 Single cylinder, thumb-turn (Classroom) K C26D 12
GX1 A 70 ICSingle cylinder SFIC, thumb-turn, 7-pin BEST® F core included (Classroom) K
C26D 12
(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
9111Steel frame strike; square.111⁄88 x 233⁄44" (29 x 70 mm)
LM9111Steel frame security strike; square.111⁄88 x 233⁄44" (29 x 70 mm)
9118Wood frame strike; square.111⁄88 x 233⁄44" (29 x 70 mm)
9118RWood frame strike; round.111⁄88 x 233⁄44" (29 x 70 mm)
A B C
GX1 A21515⁄3232
(63) 111⁄1616
(27)199⁄3232
(32.3)IN (MM)
A
CB
9806 CX5 high security SFIC core, 6 pin, 0 bitted
9807 CX5 high security SFIC core, 7 pin, 0 bitted
CX5-TPIC Tailpiece for use with CX5 SFIC cores
CBI-BF6KD-26D BEST® F type SFIC core, 6 pin, 0 bitted
CBI-BF7KD-26D BEST® F type SFIC core, 7 pin, 0 bitted
TL007 Deadbolt: 233⁄88" (60 mm) backset, 1 x 211⁄44" (25.4 x 57 mm) faceplate
TL008 Deadbolt: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
TL009 Deadbolt: 5" (127 mm) backset, 1 x 211⁄44" (25.4 x 57 mm) faceplate (not fire-rated)
GX1A85052Longer spindle and screw kit for 211⁄44" (57 mm) thick door.
01.052
FHA 51 C26DSERIES FUNCTION FINISH
Certifications • Conforms to ANSI/BHMA A156.5, Grade 2• cULus listed, 3hr fire-rating • 1 Year limited warranty
Door Thickness • 133⁄88 – 133⁄44" (35 –44.5 mm)
Handing • Non handed
Backset • 233⁄8 8 – 233⁄44" (60– 70 mm) adjustable
Deadbolt • Solid brass with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (29 x 57 mm)
Strike • 2-piece security strike (wood/metal frame)• 111⁄88 x 233⁄44" (29 x 70 mm), square corners• Plastic dust-box
Other strikes available
Chassis • Free-spinning cylinder collar• Steel cylinder housing• Exposed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable
Other keyways and keying options available, including CX5 high security
Functions 51 Single cylinder, thumbturn60 Double cylinder
Finish C26D–Satin chrome, C3–Polished brass
Other finishes available by special order
FHA SERIESCOMMERCIAL DEADBOLT
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-06.
01.052 DOREX FHA ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-06.
SELECTION GUIDE
PARTS & ACCESSORIES
9111Steel frame strike; square.111⁄88 x 233⁄44" (29 x 70 mm)
9118Wood frame strike; square.111⁄88 x 233⁄44" (29 x 70 mm)
9118RWood frame strike; round.111⁄88 x 233⁄44" (29 x 70 mm)
A B C
FHA 299⁄1616
(65) 1
(25.4) 1
(25.4)IN (MM)
A
CB
SERIES FUNCTION FINISH 1 / CASE
FHA 51 Single cylinder, with thumbturn K C26D, C3 24
FHA 60 Double cylinder K C26D, C3 24(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
TLA 42IPrivacy with indicator
01.054
TLA 51 C32D -USERIES FUNCTION FINISH OPTION1
(1) OPTIONS: 238–2 3/8IN (60MM) BACKSET -U–ADJUSTABLE BACKSET
Certifications • Conforms to ANSI/BHMA A156.5, Grade 2• cULus listed, 3hr fire-rating* • 1 Year limited warranty
(*) Except privacy model 42I
Door Thickness • 133⁄88 – 133⁄44" (35 – 44.5 mm)• SFIC Model: 199⁄1616–2" (40–51 mm)• Kit for 211⁄44" (57 mm) – available
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available• 233⁄8 8 – 233⁄44" (60– 70 mm) adjustable – available• 5" (127 mm) – available
Deadbolt • Solid brass with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (29 x 57 mm)
Strike • 2-piece security strike (wood/metal frame)• 111⁄88 x 233⁄44" (29 x 70 mm), square corners• Plastic dust-box
Other strikes available
Chassis • Free-spinning cylinder collar• Steel cylinder housing• Exposed mounting screws
Preparation • Cross bore: 111⁄22" or 211⁄88" (38 mm or 54 mm)*• Edge bore: 1" (25.4 mm)
(*) 1 11⁄22" (38 mm) installation will negate Grade 2 conformity, but will retain fire-rating.
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable• Small format interchangeable core (SFIC) model
– available
Other keyways and keying options available, including CX5 high security.
Functions 42 I Privacy with indicator51 Single cylinder, thumb-turn57 Thumb-turn only, exterior plate60 Double cylinder70 Single cylinder, thumb-turn (Classroom)
Finish C19–Matte black, C26D–Satin chrome, C3–Polished brass, C32D–Satin stainless steel
Other finishes available by special order
TLA SERIESCOMMERCIAL DEADBOLT
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
01.054 DOREX TLA ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
SELECTION GUIDE
PARTS & ACCESSORIES
9111Steel frame strike; square.111⁄88 x 233⁄44" (29 x 70 mm)
9118Wood frame strike; square.111⁄88 x 233⁄44" (29 x 70 mm)
9118RWood frame strike; round.111⁄88 x 233⁄44" (29 x 70 mm)
9806 CX5 high security SFIC core, 6 pin, 0 bitted
9807 CX5 high security SFIC core, 7 pin, 0 bitted
CX5-TPIC Tailpiece for use with CX5 SFIC cores
CBI-BF6KD-26D BEST® F type SFIC core, 6 pin, 0 bitted
CBI-BF7KD-26D BEST® F type SFIC core, 7 pin, 0 bitted
ø A B C
TLA 2 99⁄1616
(65) 111⁄88(29)
1(25)
TLA 42I 2 99⁄1616
(65) 11/32(8.5)
1(25)
TLA 57 2 99⁄1616
(65) 11/32(8.5)
1(25)
IN (MM)
A
CB
TL007 Deadbolt: 233⁄88" (60 mm) backset, 1 x 211⁄44" (25.4 x 57 mm) faceplate
TL008 Deadbolt: 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (28.5 x 57 mm) faceplate
TL009 Deadbolt: 5" (127 mm) backset, 1 x 211⁄44" (25.4 x 57 mm) faceplate (not fire-rated)
TLA-LBU Deadbolt: 233⁄8 8 -233⁄44" (60-70 mm) adjustable backset,1 x 211⁄44" (25.4 x 57 mm) faceplate
TL020Plastic spacer for latches with 1x 211⁄44" (25.4 x 57 mm) faceplate
TLA85052Longer spindle and screw kit for 211⁄44" (57 mm) thick door. Cannot be used with TLA 42I Indicator model.
SERIES FUNCTION FINISH1 / CASE
TLA 42I Privacy, with indicator* 26D, 32D 20
TLA 51 Single cylinder with thumb-turn K C19, C26D, C3, C32D 20
TLA 51-U Single cylinder with thumb-turn, adjustable backset option K C26D, C32D 20
TLA 51IC Single cylinder with thumb-turn (BEST® F, 7-pin SFIC included) K C26D, C32D 20
TLA 57 Thumb-turn only with blank exterior plate C26D 20
TLA 60 Double cylinder K C3, C32D 20
TLA 60-U Double cylinder, adjustable backset option K C32D 20
TLA 70 Single cylinder, with thumb-turn (Classroom) K C32D 20(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE (*) CANNOT ACCOMMODATE DOORS THICKER THAN 1-3/4IN (44.5 MM); NOT FIRE-RATED
B
01.060
DG1 AN 51 – 26DSERIES FUNCTION FINISH
DG1 SERIESCOMMERCIAL GATELATCH
Certifications • Conforms to ANSI/BHMA A156.5, Grade 1• cULus listed, 3hr fire-rating • 5 Year limited warranty
Door Thickness • 133⁄88 – 2" (35 – 51 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available*
(*) Special order
Spring Latch • Solid brass deadlatch• 55⁄88" (15.9 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (29 x 57 mm)• Self-adjustable for bevelled doors
Strikes • T-type strike, 111⁄88 x 233⁄44" (29 x 70 mm)• Wood frame security plate with 3" (76 mm)
wood screws• Plastic dust-box
Chassis • Die-cast trim ring with protective shield• Free-spinning solid brass cylinder collar• High-strength steel cylinder housing• Through bolt mounted• Exposed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable• Small format interchangeable core (SFIC) model
– available*
Other keyways and keying options available, including CX5 high security. (*) Special order.
Functions 51 Single cylinder, thumb-turn
Finish 26D–Satin chrome
Other finishes available by special order
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-11.
01.060 DOREX DG1 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-11.
SELECTION GUIDE
SERIES FUNCTION FINISH 1 / CASE
DG1 51 Single cylinder, thumb-turn K 26D 12(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
A B C D E F
DG1255⁄88(67)
1919⁄3232
(32.5)
1515⁄1616
(24)
99⁄3232
(7)133⁄44
(44.5)2
(51)IN (MM)
A
CB
F
D
E
01.062
DG2 AN 51 – 26DSERIES FUNCTION FINISH
DG2 SERIESCOMMERCIAL GATE LATCH
Certifications • Conforms to ANSI/BHMA A156.5, Grade 2• cULus listed, 3hr fire-rating • 5 Year limited warranty
Door Thickness • 133⁄88 – 2" (35 – 51 mm)
Handing • Non handed
Backset • 233⁄44" (70 mm)• 233⁄88" (60 mm) – available*
(*) Special order
Spring Latch • Solid brass deadlatch• 55⁄88" (15.9 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (29 x 57 mm)• Self-adjustable for bevelled doors
Strikes • T-type strike, 111⁄88 x 233⁄44" (29 x 70 mm)• Wood frame security plate with 3" (76 mm)
wood screws• Plastic dust-box
Chassis • Die-cast trim ring• Free-spinning solid brass cylinder collar• High-strength steel cylinder housing• Through bolt mounted• Exposed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Solid brass, 6-pin• Schlage "C" keyway, 2 keys• Removable, rekeyable• Small format interchangeable core (SFIC) model
– available*
Other keyways and keying options available, including CX5 high security. (*) Special order.
Functions 51 Single cylinder, thumb-turn
Finish 26D–Satin chrome
Other finishes available by special order
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-11.
01.062 DOREX DG2 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-11.
SELECTION GUIDE
SERIES FUNCTION FINISH 1 / CASE
DG2 51 Single cylinder, thumb-turn K 26D 20(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
A B C D E F G
DG2255⁄88(67)
1919⁄3232
(32.5)
1515⁄1616
(24)
99⁄3232
(7)133⁄44
(44.5)2
(51)255⁄88(67)
IN (MM)
A
CB
F
D
E G
Certifications • Conforms to ANSI/BHMA A156.13, Series 1000, Grade 1
• cULus listed, 3hr fire-rating • UL10C Positive Pressure Rated• Levers meet ADA (ANSI 117.1) requirements• 5 Year limited warranty
Door Thickness • 133⁄44" (44.5 mm)• 2–211⁄44" (51–57 mm) – available
Handing • Handed, field reversible
Backset • 233⁄44" (70 mm)
Spring Latch • Brass, 2 piece anti-friction• 33⁄44" (19 mm) throw
Deadbolt • Solid bolt, 2 security pins• 1" (25.4 mm) throw
Faceplate • 111⁄44 x 8" (32 x 203 mm), square corners• Adjusts for bevelled doors up to 11⁄88" (3 mm)
Strike • ASA T-type strike and dust-box
Cylinder • 6 pin mortise cylinder• Schlage “C” with 2 keys• Small format interchangeable core (SFIC)
mortise housing available (SFIC not included) Other keyways and keying options available, including CX5 high security
Sectional Trim • Brass lever or knob• Brass rose• S–Round: ø 277⁄1616 x 11⁄22" (61.5 x 12.7 mm)• SQ–Square: 177⁄88 x177⁄88 x11⁄22" (48 x 48 x 12.7 mm)
Escutcheon Trim • Brass lever or knob• Brass escutcheon• E–Regular 2 x 811⁄16 16 x 11⁄22" (50 x 205 x 12.7 mm)• E2–Wide 211⁄22 x 811⁄44 x 11⁄22" (63 x 210 x 12.7 mm) • E3–Large 233⁄44 x 1033⁄44 x 11⁄22" (70 x 273 x 12.7 mm)
Chassis • Rose trim: concealed mounting screws• Thumb-turn: exposed mounting screws• Escutcheon: exposed mounting screws• Single action egress
Functions 10 Passage42 Privacy42I Privacy, indicator45 Entry50 Office 56 Dormitory70 Classroom
80 Storeroom 84 Storeroom w/
deadbolt171 Dummy, single172 Dummy,
back-to-back
Lever Styles A–Apollo, R–Circa, C–Cornell, D–Dartmouth, G–Glasgow, L–Linea, S–Stanford, F–The Flat, XT–Intersect
Knob Styles K–Kent
Finish 15–Satin nickel, 19–Matte black, 26D–Satin chromeOther finishes available by special order
01.070
DM 45 L – SQ F 26DSERIES FUNCTION HAND1 TRIM STYLE FINISH
(1) L–LEFT R–RIGHT
DM SERIESMORTISE LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
01.070 DOREX DM ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
SELECTION GUIDE
SERIES TRIM STYLE** FUNCTION 1 FINISH 1 / CASE
DM S, SQ, E, E2, E3 ALL 10 Passage 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 42 Privacy 15, 19, 26D 6
DM E ALL 42I Privacy indicator K 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 45 Entry K 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 50 Office K 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 56 Dormitory K 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 70 Classroom K 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 80* Storeroom K 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 84* Storeroom, with deadbolt K 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 171 Dummy, single 15, 19, 26D 6
DM S, SQ, E, E2, E3 ALL 172 Dummy, back-to-back 15, 19, 26D 6(1) OTHER FINISHES AND FUNCTIONS AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE – PLEASE CONTACT (*) ONE-SIDED INSTALLATION MODEL AVAILABLE (**) XT / INTERSECT NOT AVAILABLE WITH ESCUTCHEON
G–Glasgow
A
B
C
L–Linea
B
AC
R–Circa
B
A C
S–Stanford
A
B
C
A–Apollo
A
B
C
C–Cornell
A
C
B
D–Dartmouth
A
B
C
F–The Flat
A C
B
K–Kent
A
B
LEVERS & KNOBS
STYLE A B C1
A–Apollo* 311⁄1616 (78) 455⁄88 (116) 211⁄1616 (53)
C–Cornell 277⁄88 (73) 555⁄1616 (134) 55⁄88 (16)
D–Dartmouth 277⁄1616 (61.5) 577⁄88 (149) 1111⁄1616 (17)
F–The Flat 277⁄88 (73) 511⁄22 (139.7) 233⁄1616 (55.5)
G–Glasgow 277⁄88 (73) 511⁄1616 (128) 211⁄1616 (52)
IN (MM) (1) ALL ROSES AND ESCUTCHEONS ARE 12.7 (11⁄22) THICK
STYLE A B C1
L–Linea 21313⁄1616 (71.4) 5 (127) 11515⁄1616 (48.4)
R–Circa 299⁄1616 (65.5) 511⁄22 (139.7) 177⁄88 (47)
S–Stanford 299⁄1616 (65.5) 511⁄1616 (128) 99⁄1616 (14)
XT–Intersect*,** 21313⁄6464 (56) 4 1515⁄1616 (125) 11⁄22 (12.7)
K–Kent 277⁄1616 (61.5) ø 2 (50.8) —
(*) HANDED LEVER, NOT FIELD REVERSIBLE, (**) SECTIONAL ONLY, NOT AVAILABLE WITH ESCUTCHEON
XT–Intersect
A
B
C
OPTIONAL ENGRAVING (SPECIAL ORDER)
LOCK TRIMS
DIMENSIONS
TRIM E1 E2 E32 S SQ
Description Regular escutcheon Wide escutcheon Large escutcheon Round rose Square rose
Width (W) 2 (50) 2 11⁄22 (64) 2 33⁄44 (70) ø 2 33⁄88 (60) 1 77⁄88 (48)
Height (H) 8 11⁄1616 (205) 8 11⁄44 (210) 10 33⁄44 (273) — 1 77⁄88 (48)
Depth (D) 11⁄22 (12.7) 11⁄22 (12.7) 11⁄22 (12.7) 11⁄22 (12.7) 11⁄22 (12.7)
Material Brass Brass Brass Brass Brass
IN (MM) (1) AVAILABLE WITH PRIVACY INDICATOR–42I (2) OPTIONAL ENGRAVING AVAILABLE – PLEASE CONTACT
IN (MM)
DOREX DM 01.070
1 11⁄44(32)
4 77⁄88(123)
3 33⁄88(86)
8(203)
3 55⁄88(92)
5 1313⁄1616
(148)
2727⁄3232
(22)
4 55⁄3232
(105)2 33⁄44(70)
1 11⁄44(32)
11⁄22(12.7)
33⁄44(19)
1(25.4)
W
H
D
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
277⁄1616
(61.6)
MUST BE INSTALLED ON A DOOR WITH A SOLID LOCK STILE WIDTH OF AT LEAST 5" (127 MM) OR WITH APPROPRIATE REINFORCEMENT.
01.070 DOREX DM ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
DM45X-PSReplacement strike for133⁄44 (45) thick door. (Functions 42, 45, 56, 84)
DM80X-PSReplacement strike for 133⁄44 (45) thick door. (Functions 10, 50, 70, 80)
DM45X-PEMortise lock emergency privacy key; round. Includes plate and screws.
DM45X-PESMortise lock emergency privacy key; square. Includes plate and screws.
DM45X-PTMortise lock thumbturn; round.
DM45X-PTSMortise lock thumbturn; square.
DM00X-PPRVIPrivacy indicator kit, round. Includes replacement interior/exterior trims for 42 function. 133⁄44 (44.5) door thickness only.
DM00X-PPRVIQPrivacy indicator kit, square. Includes replacement interior/exterior trims for 42 function. 133⁄44 (44.5) door thickness only.
DM00X-PPRVI-ECYLPrivacy indicator kit, round. Includes replacement interior/exterior trims for 45 or 56 function. 133⁄44 (44.5) door thickness only. Includes DM00X-PECYL cylinder and 2 keys.
DM00X-PPRVIQ-ECYLPrivacy indicator kit, square. Includes replacement interior/exterior trims for 45 or 56 function. 133⁄44 (44.5) door thickness only. Includes DM00X-PECYL cylinder and 2 keys.
DM45X-PRMortise cylinder collar with spring; round.
ø 11111⁄1616 x 33⁄8 8 (ø 43 x 9)
DM45X-PRSMortise cylinder collar with spring; square.
177⁄88 x 177⁄88 x 33⁄8 8 (48 x 48 x 9)
DM00X-PSCYL• 111⁄88 (28.6) 5-pin (drilled 6) brass mortise
cylinder; Schlage "C" with 2 keys• For sectional installations on 133⁄44 (45)
thick doors • Includes DM00X-PCAM
DM00X-PECYL• 111⁄44 (31.8) 5-pin (drilled 6) brass mortise
cylinder; Schlage "C" with 2 keys• For escutcheon installations on 133⁄44 (45)
thick doors • Includes DM00X-PCAM
DM00X-PCAMReplacement mortise cylinder cam, with screws
DM00X-PKDT225Installation kit for 2–211⁄44 (51–57) thick doors.• Includes extended thumb-turn, spindle,
springs, strike and mounting hardware for rose or escutcheon trim
• Mortise cylinder NOT INCLUDED Please contact for details
PARTS & ACCESSORIES
Certifications • Conforms to ANSI/BHMA A156.5, Grade 1• cULus listed, 3hr fire-rating • 5 Year limited warranty
Door Thickness • 133⁄88" (35 mm) minimum
Handing • Non-handed
Backset • 233⁄44" (70 mm)
Deadbolt • Solid bolt• 1" (25.4 mm) throw
Faceplate • 111⁄44 x 455⁄88" (28.6 x 117.5 mm)• Square corners
Strike • 111⁄88 x 311⁄22" (28.6 x 88.6 mm)• Square corners
Trim • Cylinder collar and thumbturn available• Round or square styles available
Sold separately, please contact for details
Chassis • Functions 60 or 64: concealed mounting
All other functions: exposed mounting
Cylinder • Conventional and high security mortise cylinders available
• Small format interchangeable core (SFIC) mortise housing available (less core)
Sold separately, please contact for details
Functions 51 Single cylinder with thumbturn 55 Thumbturn only 60 Double cylinder1
64 Cylinder only1
(1) For use in rooms with more than one exit
Finish 15–Satin nickel, 26D–Satin chrome
Other finishes available by special order
01.072
DMDB 51 SQ – 26DSERIES FUNCTION TRIM1 FINISH
(1) OPTIONS: S –ROUND SQ –SQUARE NOTE: DMDB LOCKS ARE ASSEMBLED TO ORDER, PLEASE CONTACT FOR DETAILS
* SHOWN WITH OPTIONAL CYLINDER & COLLARS
DMDB SERIESMORTISE LOCKSET
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-01.
01.072 DOREX DMDB ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-01.
DIMENSIONS
DMDB-PS26DDeadbolt strike, square corners 111⁄44 x 311⁄22" (28.6 x 88.6 mm)
DM45X-PRMortise cylinder collar with spring; round.ø 11111⁄1616 x 33⁄88" (43 x 9 mm)
DM45X-PRSMortise cylinder collar with spring; square.177⁄88 x 177⁄88 x 33⁄88" (48 x 48 x 9 mm)
DM00X-PSCYL• 111⁄88" (28.6 mm) 5-pin (drilled 6) brass mortise
cylinder; Schlage "C" with 2 keys• For installations on 133⁄44" (45 mm) thick doors • Includes DM00X-PCAM
DM00X-PECYL• 111⁄4 4 " (31.8 mm) 5-pin (drilled 6) brass
mortise cylinder; Schlage "C" with 2 keys• For installations on 2" (51 mm) thick doors • Includes DM00X-PCAM
DM00X-PCAMReplacement mortise cylinder cam, with screws
DM45X-PTMortise lock thumbturn; round.
DM45X-PTSMortise lock thumbturn; square.
DM00X-PPRVIPrivacy indicator kit, round. Includes replacement interior/exterior trims for use with function 55. 133⁄44" (44.5 mm) door thickness only.
DM00X-PPRVIQPrivacy indicator kit, square. Includes replacement interior/exterior trims for use with function 55. 133⁄44" (44.5 mm) door thickness only.
DM00X-PPRVI-ECYLPrivacy indicator kit, round. Includes replacement interior/exterior trims for use with function 51. 133⁄44" (44.5 mm) door thickness only. Includes DM00X-PECYL cylinder and 2 keys.
DM00X-PPRVIQ-ECYLPrivacy indicator kit, square.Includes replacement interior/exterior trims for use with function 51. 133⁄44" (44.5 mm) door thickness only. Includes DM00X-PECYL cylinder and 2 keys
PARTS & ACCESSORIES
311⁄22 (88.6)
111⁄88(28.6)
1 (25.4)
111⁄88 (28.6)
377⁄88 (98.4)
11313⁄3232 (35.7)
22727⁄3232 (72.2)
233⁄44 (70)
11⁄44(6.4)
11⁄22 (12.7)
1111⁄1616 (17.5)
IN (MM)
01.205
ENTRY HANDLESETSDOREX SERIES
ARCOMATTE BLACK
PLATO SATIN NICKEL
T400 SERIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
SELECTION GUIDE
C10BOIL RUB. BRONZE
C11PANTIQUE BRONZE
C15SATIN
NICKEL
C15AANTIQUE NICKEL
C19MATTE BLACK
C26POLISHED CHROME
C26DSATIN
CHROME
C3POLISHED
BRASS
C32DSATIN
S.STEEL
C4SATIN BRASS
C5ANTIQUE
BRASS
V3*POLISHED
BRASS/ CASE
ARCO AR • • • • 6
PLATO PL • • • • 6OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) LIFETIME FINISH WARRANTY
A B C
ARCOAR LTS
21111⁄1616
(68)5*
(127)81111⁄1616
(220)
PLATOPL LTS
21111⁄1616
(68)511⁄22
(140)92727⁄3232
(250)IN (MM) (*) RECOMMENDED DISTANCE
B
C
A
SPECIFICATIONS
Certifications • 25 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄44 – 2 11⁄44" ( 44.5 – 57 mm)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Spring Latch • Solid zinc alloy• 11⁄22" (12.7 mm) throw
Deadbolt • Steel deadbolt with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • 4-Way type (W), square corner; convertible to drive-in
• 1 x 211⁄44" (25.4 x 57 mm)
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
• Deadbolt strike, round corner 111⁄8 8 x 233⁄44" (29 x 70 mm)
Exterior Trim • Zinc die-cast handle
Interior Trim • Standard lever, square rose• Square thumb-turn trim• Round trim and rose available
Mounting • Concealed mounting screws• All mounting hardware included
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm) • Plato: 511⁄22" (140 mm) center-to-center
Cylinder • 5-pin cylinder• Weiser keyway• 2 keys
Functions • Entry
Finish See Selection Guide.
T401 PL LTS C15 KD WSERIES STYLE TRIM FINISH KEYING LATCH
01.205 DOREX SERIES ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
PLATO PROFILESHOWN
01.210
ENTRY HANDLESETSSIGNATURE SERIES
BIARRITZANTIQUE BRASS
CAPRI SATIN NICKEL
IMPERIALANTIQUE NICKEL
MAYFAIRMATTE BLACK
400 SERIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-01.
SELECTION GUIDE
C10BOIL RUB. BRONZE
C11PANTIQUE BRONZE
C15SATIN
NICKEL
C15AANTIQUE NICKEL
C19MATTE BLACK
C26POLISHED CHROME
C26DSATIN
CHROME
C3POLISHED
BRASS
C32DSATIN
S.STEEL
C4SATIN BRASS
C5ANTIQUE
BRASS
V3*POLISHED
BRASS/ CASE
BIARRITZ BI • • • 6
CAPRI CA • • • • 6
IMPERIAL IM • • • 6
MAYFAIR MA • • • • • • • • • 6OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) LIFETIME FINISH WARRANTY
A B* C
BIARRITZBI B
233⁄88(60)
5(127)
81313⁄3232
(214)
CAPRICA B
255⁄3232
(55)5
(127)81313⁄3232
(214)
IMPERIALIM B
299⁄1616
(65)5
(127)81313⁄3232
(214)
MAYFAIRMA B
277⁄1616
(62)5
(127)81313⁄3232
(214)IN (MM) (*) RECOMMENDED DISTANCE
B
C
A
SPECIFICATIONS
Certifications • Conforms to ANSI/BHMA Grade 3• 20 minute fire-rating available with
listed fire-cans* • 25 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄44 – 2 11⁄44" ( 44.5 – 57 mm)
Handing • Non handed
Backset • 233⁄88– 233⁄44" (60–70 mm), adjustable
Spring Latch • Solid brass• 11⁄22" (12.7 mm) throw
Deadbolt • Brass deadbolt with hardened steel security pin• 1" (25.4 mm) throw
Gate latch available**
Faceplate • 4-Way type (W), square corner; convertible to drive-in
• 1 x 211⁄44" (25.4 x 57 mm)
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
• Deadbolt strike, square corner 111⁄8 8 x 233⁄44" (29 x 70 mm)
Exterior Trim • Brass die-cast handle• Biarritz : Zinc die-cast handle
Interior Trim • Standard ball knob (Bala)• Round thumb-turn trim
Other SIGNATURE series levers and knobs available – please contact for availability (sold separately)
Chassis • Exposed mounting screws• All mounting hardware included
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • 5-pin (drilled 6-pin) brass cylinder in steel housing• Removable, rekeyable• 3 keys
Construction master keying (CMK) and other keying services available – please contact for details
Functions • Entry**• Dummy – available
Finish See Selection Guide.
401 BI B C15 KD W –SERIES1 STYLE TRIM FINISH KEYING LATCH OPTION2
(1) 400: NO KEYWAY 401: WEISER 402: SCHLAGE KEYWAY USE 400 WHEN ORDERING DUMMY (2) DUM: DUMMY
(*) Fire-cans (2) must be ordered in conjunction with handleset, not available separately. For fire labelled wood doors ONLY.
(**) GATE LATCH AVAILABLE, must be ordered in conjunction with handleset – please contact for details.
01.210 DOREX SIGNATURE ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-01.
CAPRI PROFILESHOWN
K Full keying services available – please contact for details
01.230
ENTRY HANDLESETSBUILDER SERIES
CHÂTEAUANTIQUE BRONZE
ISLE SATIN NICKEL
LAURENTIANSATIN CHROME
MANORANTIQUE BRONZE
300 SERIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
SELECTION GUIDE
C10BOIL RUB. BRONZE
C11PANTIQUE BRONZE
C15SATIN
NICKEL
C15AANTIQUE NICKEL
C19MATTE BLACK
C26POLISHED CHROME
C26DSATIN
CHROME
C3POLISHED
BRASS
C32DSATIN
S.STEEL
C4SATIN BRASS
C5ANTIQUE
BRASS
V3*POLISHED
BRASS/ CASE
CHÂTEAU CH • • • • • 6
ISLE IL • • • 6
LAURENTIAN LA • • • • 6
MANOR MN • • • • • • 6OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) LIFETIME FINISH WARRANTY
A B* C
CHÂTEAU CH B
299⁄1616
(65)5
(127)81313⁄3232
(214)
ISLE IL B
299⁄1616
(65)5
(127)81313⁄3232
(214)
LAURENTIAN LA B
211⁄44(57)
5(127)
855⁄88(219)
MANOR MN B
233⁄88(60)
5(127)
81313⁄3232
(214)IN (MM) (*) RECOMMENDED DISTANCE
B
C
A
SPECIFICATIONS
Certifications • 1 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄8 8 – 133⁄44" (35 – 44.5 mm)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Spring Latch • Solid zinc alloy• 11⁄22" (12.7 mm) throw
Deadbolt • Solid deadbolt with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • 4-Way type (W), square corner; convertible to drive-in
• 1 x 211⁄44" (25.4 x 57 mm)
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
• Deadbolt strike, round corner 111⁄8 8 x 233⁄44" (29 x 70 mm)
Exterior Trim • Zinc die-cast handle
Interior Trim • Standard ball knob• Round thumb-turn trim
Chassis • Exposed mounting screws• All mounting hardware included
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • 5-pin cylinder• Weiser keyway• 2 keys
Functions • Entry
Finish See Selection Guide.
301 CH B C15 KD WSERIES1 STYLE TRIM FINISH KEYING LATCH
(1) USE V301 WHEN ORDERING LAURENTIAN (LA) MODEL
01.230 DOREX BUILDER ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
LAURENTIAN PROFILESHOWN
01.240
DOOR LOCKSTECNICA DESIGN SERIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
LINEASATIN NICKEL
THE FLATSATIN NICKEL
CIRCASATIN NICKEL
SELECTION GUIDE
10BOIL RUB. BRONZE
11PANTIQUE BRONZE
15SATIN
NICKEL
15AANTIQUE NICKEL
19MATTE BLACK
26POLISHED CHROME
26DSATIN
CHROME
3POLISHED
BRASS
32DSATIN
S.STEEL
4SATIN BRASS
5ANTIQUE
BRASS
V3*POLISHED
BRASS/ CASE†
CIRCA CT • • • • 10
LINEA LT • • • • 10
THE FLAT FT • • • • 10OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) LIFETIME FINISH WARRANTY (†) DUMMY ARE 20/CASE
A B C D E
CIRCA CT
299⁄1616
(64.5)4
(101.6)199⁄3232
(15)133⁄44(45)
11⁄22(12.7)
LINEALT / LT S
299⁄1616
(64.5)4
(101.6)
2525⁄3232
(20)199⁄1616
(40)
11⁄22(12.7)
THE FLATFT / FT S
299⁄1616
(64.5)4
(101.6)
3737⁄6464
(14.7)12525⁄3232
(45.3)
11⁄22(12.7)
IN (MM)
SPECIFICATIONS
Certifications • Conforms to ANSI/BHMA Grade 3• Meets ADA requirements• 20 minute fire-rating available with listed fire-can*
• 25 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄88 – 2" ( 35 – 51 mm)• 211⁄44" (57 mm) extension kit available (#TDK100TE)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Spring Latch • Stainless steel• 11⁄22" (12.7 mm) throw
Faceplate • Convertible mortise/drive-in type, square corner• Preset to mortise (M) or to drive-in (V)• 1 x 211⁄44" (25.4 x 57 mm)
Other options available
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
• ASA Strike for metal door frame – available
Trim • Zinc die-cast lever• Steel base, brass rose• Round or square rose (S)
Chassis • Concealed mounting screws• All mounting hardware included• Dummy includes surface and thru-bolt
mounting hardware
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Function 10 Passage42 Privacy, with auto-release-5 Dummy, single (surface / thru-bolt)-3 Handleset interior trim*
(*) Handleset trim includes lever spring latch
Lever Style See Selection guide.
Finish See Selection guide.
100 10 FT S 15 M —SERIES FUNCTION1 STYLE ROSE2 FINISH LATCH3 OPTION4
(1) OMIT FUNCTION WHEN ORDERING DUMMY OR HANDLESET TRIM OPTION (2) BLANK : ROUND S: SQUARE (3) M: MORTISE V: DRIVE-IN (4) -3: HANDLE TRIM -5: DUMMY
(*) Fire-can must be ordered in conjunction with lockset, not available separately. For fire labelled wood doors ONLY.
01.240 DOREX TECNICA DESIGN ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
THE FLATPROFILESHOWN
B
C
A
D
E
ø
ø
ø
01.245
LEVER LOCKSETSSIGNATURE SERIES
ATHENAANTIQUE BRONZE
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
APOLLOSATIN NICKEL
CAMBRIDGESATIN NICKEL
ESCORTSATIN CHROME
HAWTHORNESATIN CHROME
JUNOMATTE BLACK
MANHATTANANTIQUE BRASS
SELECTION GUIDE
C10BOIL RUB. BRONZE
C11PANTIQUE BRONZE
C15SATIN
NICKEL
C15AANTIQUE NICKEL
C19MATTE BLACK
C26DSATIN
CHROME
C3POLISHED
BRASS
C32DSATIN
S.STEEL
C4SATIN BRASS
C5ANTIQUE
BRASS
V3**POLISHED
BRASS/ CASE†
ATHENA (REVERSIBLE)* AT • • • • • 20
APOLLO (REVERSIBLE)* AP • • • 20
CAMBRIDGE CB • • • • 20
ESCORT ES • • 20
HAWTHORNE HW • 20
JUNO JN • • • 20
MANHATTAN M • • • • • 20OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) RIGHT HAND, FIELD REVERSIBLE. DUMMY LEVERS ARE NOT REVERSIBLE, PLEASE INDICATE HANDING. (**) LIFETIME FINISH WARRANTY (†) DUMMY ARE 20/CASE
A B C D E
ATHENA AT
299⁄1616
(65)31515⁄1616
(100)1
(25)199⁄1616
(40)
1919⁄3232
(15)
APOLLOAP
299⁄1616
(65)411⁄88
(105)
33⁄44(20)
133⁄88(35)
1919⁄3232
(15)
CAMBRIDGECB
299⁄1616
(65)31515⁄1616
(100)
55⁄1616
(8)13131⁄3232
(50)
1919⁄3232
(15)
ESCORTES
299⁄1616
(65)31515⁄1616
(100)
55⁄1616
(8)
1515⁄3232
(12)
1919⁄3232
(15)
HAWTHORNEHW
299⁄1616
(65)31515⁄1616
(100)
33⁄88(9.5)
13131⁄3232
(50)
1919⁄3232
(15)
JUNOJN
299⁄1616
(65)411⁄88
(105)
1111⁄1616
(18)199⁄1616
(40)
1919⁄3232
(15)
MANHATTANM
299⁄1616
(65)31515⁄3232
(88)
55⁄1616
(8)13131⁄3232
(50)
1919⁄3232
(15)IN (MM)
SPECIFICATIONS
Certifications • Conforms to ANSI/BHMA Grade 3• 20 minute fire-rating available with
listed fire-can* • 25 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄88 –133⁄44" ( 35 –44.5 mm)• 211⁄44" (57 mm) extension kit available (#TDK100TE)
Handing • Handed, reversible or non handed
See Selection Guide.
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Spring Latch • Solid brass or zinc alloy• 11⁄22" (12.7 mm) throw
Faceplate • Convertible mortise/drive-in type, square corner• Preset to mortise (M) or to drive-in (W)• 1 x 211⁄44" (25.4 x 57 mm)
Other options available
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
Trim • Zinc die-cast lever• Steel base, brass rose• Round rose
Chassis • Exposed mounting screws• All mounting hardware included
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Keyed functions include 5-pin brass cylinder• Removable, rekeyable• 2 keys
Function 10 Passage42 Privacy, with auto-release51 Entry K
-1 Single Dummy (surface)-2 Single Dummy (thru-bolt)-3 Handleset trim*
(*) Handleset trim includes lever spring latch
Lever Styles See Selection Guide.
Finish See Selection Guide.
101 51 AT C15 KD M RH —SERIES1 FUNCTION STYLE FINISH KEYING LATCH2 HAND3 OPTION4
(1) 100: NO KEYWAY; 101: WEISER; 102: SCHLAGE KEYWAY; OMIT FUNCTION AND USE 100 WHEN ORDERING DUMMY OR TRIM (2) M: MORTISE W: DRIVE-IN (3) ATHENA OR DUMMY APOLLO, INDI-CATE RH: RIGHT HAND, LH: LEFT HAND (4) -1: DUMMY, SINGLE -2: DUMMY, THRU-BOLT -3: TRIM
(*) Fire-can must be ordered in conjunction with lockset, not available separately. For fire labelled wood doors ONLY.
01.245 DOREX SIGNATURE ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
ATHENAPROFILESHOWN
K Full keying services available – please contact for details
B
C
A
D
E
01.250
LEVER LOCKSETSBUILDER SERIES
CASSIUSSATIN CHROME
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-02.
LIVIAANTIQUE NICKEL
NEROMATTE BLACK
INTERSECTSATIN NICKEL
EARL SATIN CHROME
WAVEANTIQUE NICKEL
STRAIGHTANTIQUE BRONZE
SELECTION GUIDE
10BOIL RUB. BRONZE
11PANTIQUE BRONZE
15SATIN
NICKEL
15AANTIQUE NICKEL
19MATTE BLACK
26POLISHED CHROME
26DSATIN
CHROME
3POLISHED
BRASS
32DSATIN
S.STEEL
4SATIN BRASS
5ANTIQUE
BRASS/ CASE†
EARL E • • 24
CASSIUS (HANDED) Q • • • 24
LIVIA L • • • • 24
INTERSECT* (REVERSIBLE)** XTS • • 24
NERO N • • • 24
STRAIGHT STR • • • • • • 24
WAVE* (HANDED) WI • • • • 24OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) CONCEALED MOUNTING SCREWS (**) RIGHT HAND, FIELD REVERSIBLE. DUMMY LEVERS ARE NOT REVERSIBLE, PLEASE INDICATE HANDING. (†) DUMMY ARE 30/CASE
A B C D E
EARLE
299⁄1616
(65)311⁄22(89)
33⁄88(9.5)
133⁄88(35)
1717⁄3232
(13.5)
CASSIUSQS
299⁄1616
(65)455⁄88
(117)
2929⁄3232
(23)11111⁄1616
(43.4)
1717⁄3232
(13.5)
LIVIAL / LS
299⁄1616
(65)377⁄88
(99.8)
33⁄44(19.5)
133⁄44(45)
1717⁄3232
(13.5)
INTERSECTXTS
299⁄1616
(65)41515⁄1616
(125)
55⁄88(15.9)
11⁄22(12.7)
1717⁄3232
(13.5)
NERON / NS
299⁄1616
(65)411⁄1616
(103)
33⁄88(9.5)
2(50.5)
1717⁄3232
(13.5)
STRAIGHT STR
299⁄1616
(65)333⁄44
(95.3)
33⁄1616
(4.8)2
(50.7)
11⁄44(6.5)
WAVEWI
299⁄1616
(65)411⁄44
(108)1
(25.4)111⁄22(38)
1919⁄3232
(15)IN (MM)
SPECIFICATIONS
Certifications • 1 Year limited mechanical warranty • 1 Year limited finish warranty
Door Thickness • 133⁄88– 133⁄44" ( 35 – 44.5 mm)
Handing • Handed, reversible or non handed
See Selection Guide.
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Spring Latch • Solid zinc alloy• 11⁄22" (12.7 mm) throw
Faceplate • 4-Way type, square corner; convertible to drive-in
• 1 x 211⁄44" (25.4 x 57 mm)• Fixed mortise faceplate (M) –available
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
Trim • Zinc die-cast lever• Steel base and rose• Round or square rose (S)
Chassis • Exposed or concealed mounting screws• All mounting hardware included
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Function 00 Dummy, single (STR lever only)10 Passage17 Dummy, single* 42 Privacy51 Entry (STR lever only)
(*) Intersect/Wave dummy levers include surface and thru-bolt mounting hardware.
Lever Style See Selection Guide.
Finish See Selection Guide.
V2X 42 Q S L – 15 MSERIES1 FUNCTION STYLE2 ROSE3 HAND4 FINISH LATCH5
(1) USE STR WHEN ORDERING STRAIGHT LEVER (2) LEAVE BLANK WHEN ORDERING STRAIGHT LEVER (3) BLANK: ROUND S: SQUARE (4) CASSIUS, WAVE OR INTERSECT DUMMY, INDICATE R: RIGHT HAND, L: LEFT HAND (5) BLANK: 4-WAY LATCH; M: FIXED MORTISE
01.250 DOREX BUILDER ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-02.
B
C
A
Dø
ø
ø
ø
ø
LIVIAPROFILESHOWN
E
01.265
KNOB LOCKSETSSIGNATURE SERIES
BALASATIN NICKEL
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
EGLINGTONANTIQUE NICKEL
SELECTION GUIDE
C10BOIL RUB. BRONZE
C11PANTIQUE BRONZE
C15SATIN
NICKEL
C15AANTIQUE NICKEL
C19MATTE BLACK
C26POLISHED CHROME
C26DSATIN
CHROME
C3POLISHED
BRASS
C32DSATIN
S.STEEL
C4SATIN BRASS
C5ANTIQUE
BRASS
53ANT. / POL.
BRASS/ CASE
BALA B • • • • • • • 20
EGLINGTON EG • • • • 20OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT
A B C D
BALAB
299⁄1616
(65)2
(51)199⁄1616
(40)21⁄2
(63.5)
EGLINGTONEG
299⁄1616
(65)133⁄88(60)
199⁄1616
(40)21⁄2
(63.5)IN (MM)
SPECIFICATIONS
Certifications • Conforms to ANSI/BHMA Grade 3• 20 minute fire-rating available with
listed fire-can* • 25 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄88 – 133⁄44 " ( 35 – 44.5 mm)• 211⁄44" (57 mm) extension kit available (#TDK100TE)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Spring Latch • Solid zinc alloy• 11⁄22" (12.7 mm) throw
Faceplate • Convertible mortise/drive-in type, square corner• Preset to mortise (M) or to drive-in (W)• 1 x 211⁄44" (25.4 x 57 mm)
Other options available
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
Trim • Steel knob• Steel base, brass rose• Round rose
Chassis • Exposed mounting screws• All mounting hardware included
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Keyed functions include 5-pin brass cylinder• Removable, rekeyable• 2 keys
Function 10 Passage42 Privacy, with auto-release51 Entry K
-1 Single Dummy (surface)-2 Single Dummy (thru-bolt)-3 Handleset trim
Knob Styles See Selection Guide.
Finish See Selection Guide.
101 51 B C15 KD M –SERIES1 FUNCTION STYLE FINISH KEYING LATCH2 OPTION3
(1) 100: NO KEWWAY 101: WEISER 102: SCHLAGE KEYWAY; OMIT FUNCTION AND USE 100 WHEN ORDERING DUMMY OR TRIM (2) M: MORTISE W: DRIVE-IN (3) -1: DUMMY, SINGLE -2: DUMMY, THRU-BOLT -3: TRIM
(*) Fire-can must be ordered in conjunction with lockset, not available separately. For fire labelled wood doors ONLY.
01.265 DOREX SIGNATURE ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
BALAPROFILESHOWN
B
D
A
K Full keying services available – please contact for details
C
01.270
KNOB LOCKSETSBUILDER SERIES
RONDOSATIN CHROMEPASSAGE
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
RONDOSATIN CHROMEENTRY
SELECTION GUIDE
10BOIL RUB. BRONZE
11PANTIQUE BRONZE
15SATIN
NICKEL
15AANTIQUE NICKEL
19MATTE BLACK
26DSATIN
CHROME
3POLISHED
BRASS
4SATIN BRASS
5ANTIQUE
BRASS
53ANT. / POL.
BRASS/ CASE†
RONDO BM • • • • • • • 24OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT
ø A B C
RONDOBM
299⁄1616
(65)2
(51)233⁄44(70)
IN (MM)
SPECIFICATIONS
Certifications • 1 Year limited mechanical warranty • 1 Year limited finish warranty
Door Thickness • 133⁄88– 133⁄44" ( 35 – 44.5 mm)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Latch • Solid zinc alloy• 11⁄22" (12.7 mm) throw
Faceplate • 4-Way type, square corner; convertible to drive-in
• 1 x 211⁄44" (25.4 x 57 mm)• Fixed mortise faceplate (M) –available
Strike • Full-lip strike, round corner 133⁄44 x 211⁄44"(44.5 x 57 mm)
Trim • Steel knob• Steel base and rose• Round rose
Chassis • Exposed mounting screws• All mounting hardware included• Dummy includes surface and thru-bolt
mounting hardware
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Keyed functions include 5-pin cylinder• Weiser keyway• 2 keys
Function 10 Passage17 Dummy, single (surface / thru-bolt) 42 Privacy51 Entry K
Style See Selection Guide.
Finish See Selection Guide.
V3X 42 BM – 15 MSERIES1 FUNCTION STYLE FINISH LATCH2
(1) USE V31 FOR KEYED FUNCTIONS (2) 4-WAY LATCH BY DEFAULT; M: FIXED MORTISE
01.270 DOREX BUILDER ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
B
C
A
01.280
DEADBOLT LOCKS TECNICA DESIGN SERIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
GIROSATIN NICKEL
QUADRASATIN NICKEL
SELECTION GUIDE
STYLE10B
OIL RUB. BRONZE
11PANTIQUE BRONZE
15SATIN
NICKEL
15AANTIQUE NICKEL
19MATTE BLACK
26POLISHED CHROME
26DSATIN
CHROME
32DSATIN
S.STEEL
3POLISHED
BRASS
4SATIN BRASS
5ANTIQUE
BRASS
V3*POLISHED
BRASS/ CASE
GIRO TR • • • • 24
QUADRA TS • • • • 24OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) LIFETIME FINISH WARRANTY
A B C D E F
GIROTR
211⁄22(64)
1515⁄1616
(23.8)211⁄22(64)
1(25.4)
33⁄88(9)
177⁄88(47)
QUADRATS
299⁄1616
(64.5)
1515⁄1616
(23.8)299⁄1616
(64.5)1
(25.4)
33⁄88(9)
133⁄44(45)
IN (MM)
SPECIFICATIONS
Certifications • 20 minute fire-rating available with listed fire-can*
• 25 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄88 – 133⁄44" ( 35 – 44.5 mm)• 211⁄44" (57 mm) extension kit available (#TDK100TE)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Deadbolt • Steel with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • Mortise type (M); square corner; convertible to drive-in
• Drive-in only (V) type available• 1 x 211⁄44" (25.4 x 57 mm)
Other options available
Strike • Security strike • 111⁄8 8 x 233⁄44"(28 x70 mm)
Trim • Square (TS) or round (TR) inside thumb-turn with matching exterior trim
• Concealed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • 5-pin brass cylinder in steel housing• Removable, rekeyable• 2 keys
Styles TR–Giro; TS–Quadra
Functions 51 Single cylinder with thumb-turn
Finish See Selection Guide.
201 51 TR 15 KD MSERIES1 FUNCTION STYLE FINISH KEYING2 LATCH3
(1) 201: WEISER 202: SCHLAGE KEYWAY (2) KA: KEYED ALIKE KD: KEYED DIFFERENT (3) M: MORTISE V: DRIVE-IN ONLY
01.280 DOREX TECNICA DESIGN ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
A
B
C
D
E
F
(*) Fire-can must be ordered in conjunction with deadbolt, not available separately. For fire labelled wood doors ONLY.
K Full keying services available – please contact for details
QUADRAPROFILESHOWN
ø
01.285
DEADBOLT LOCKSSIGNATURE SERIES
200 SERIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
200 SERIESSINGLE CYLINDER
200 SERIESTHUMB-TURN ONLY
200 SERIESDOUBLE CYLINDER
SELECTION GUIDE
C10BOIL RUB. BRONZE
C11PANTIQUE BRONZE
C15SATIN
NICKEL
C15AANTIQUE NICKEL
C19MATTE BLACK
C26POLISHED CHROME
C26DSATIN
CHROME
C32DSATIN
S.STEEL
C3POLISHED
BRASS
C4SATIN BRASS
C5ANTIQUE
BRASS
C53ANT. / POL.
BRASS
V3*POLISHED
BRASS/ CASE
200 SERIES • • • • • • • • • • • 24OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT (*) LIFETIME FINISH WARRANTY
A B C D E F
200 SERIES299⁄1616
(65)111⁄88(29)
211⁄22(63)
1(25.4)
33⁄88(9)
133⁄88(35)
IN (MM)
SPECIFICATIONS
Certifications • 20 minute fire-rating available with listed fire-can*
• 25 Year limited mechanical warranty • 5 Year limited finish warranty
Door Thickness • 133⁄88 – 133⁄44" ( 35 – 44.5 mm)• 211⁄44" (57 mm) extension kit available (#TDK100TE)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Deadbolt • Solid brass or steel with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • Mortise type (M); square corner; convertible to drive-in
• 1 x 211⁄44" (25.4 x 57 mm)
Other options available
Strike • Security strike • 111⁄8 8 x 233⁄44"(28 x70 mm)
Chassis • Round inside thumb-turn wth matchng exterior• Rotating exterior cylinder collar• Exposed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • Keyed functions include 5-pin (drilled 6-pin) brass cylinder in steel housing
• Removable, rekeyable• 2 keys
Function 51 Single cylinder with thumb-turn K
55 One-side, thumb-turn only57 Thumb-turn with exterior plate60 Double cylinder K
Finish See Selection Guide.
201 51 C15 KD MSERIES1 FUNCTION FINISH KEYING2 LATCH
(1) 200: NO KEYWAY 201: WEISER 202: SCHLAGE KEYWAY USE 200 WHEN ORDERING FUNCTIONS 55 OR 57 (2) KA: KEYED ALIKE KD: KEYED DIFFERENT
01.285 DOREX SIGNATURE ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
A
B
C
D
E
F
(*) Fire-can must be ordered in conjunction with lockset, not available separately. For fire labelled wood doors ONLY.
K Full keying services available – please contact for details
ø ø
01.290
DEADBOLT LOCKSBUILDER SERIES
V10 SERIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
CITADELLESINGLE CYLINDER
SELECTION GUIDE
STYLE10B
OIL RUB. BRONZE
11PANTIQUE BRONZE
15SATIN
NICKEL
15AANTIQUE NICKEL
19MATTE BLACK
26POLISHED CHROME
26DSATIN
CHROME
3POLISHED
BRASS
32DSATIN
S.STEEL
4SATIN BRASS
5ANTIQUE
BRASS
53ANT. / POL.
BRASS/ CASE
CITADELLE • • • • • • • 24OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED – PLEASE CONTACT
SPECIFICATIONS
Certifications • 1 Year limited mechanical warranty • 1 Year limited warranty
Door Thickness • 133⁄88 – 133⁄44" ( 38 – 44.5 mm)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60–70 mm), adjustable
Deadbolt • Steel with hardened steel security bolt• 1" (25.4 mm) throw
Faceplate • Mortise type (M); square corner; convertible to drive-in
• 1 x 211⁄44" (25.4 x 57 mm)
Strike • Security strike • 111⁄8 8 x 233⁄44"(28 x70 mm)
Chassis • Round inside thumb-turn wth matchng exterior• Exposed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder • 5 pin cylinder• Weiser keyway• 2 keys
Function 51 Single cylinder with thumb-turn
Finish See Selection Guide.
V10 51 – 15 KD MSERIES FUNCTION FINISH KEYING1 LATCH
(1) KD: KEYED DIFFERENT; KA: KEYED ALIKE
01.290 DOREX BUILDER ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
A B C D E F
CITADELLE299⁄1616
(65)111⁄44(32)
211⁄22(63)
1(25.5)
33⁄88(9)
11313⁄3232
(36)IN (MM)
A
B
C
D
E
F
ø ø
01.300ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-12.
• Fits doors 133⁄88" (35 mm) thick• Solid brass construction• Non-handed• Privacy model includes strike• Mounting hardware included: wood screws
DIMENSIONS211⁄44D x 311⁄44H x 133⁄88 W"(57 x 83 x 35 mm)
MODELS2510: Passage2542: Privacy
POCKET DOORRESIDENTIAL AUXILIARY LOCKS
POCKET DOOR LOCK 2510, 2542
2510 C15MODEL FINISH
C15 C15A C19 C26 C26D C3 C5
SATIN NICKEL
ANTIQUE NICKEL
MATTE BLACK
POLISHED CHROME
SATIN CHROME
POLISHEDBRASS
ANTIQUE BRASS
OTHER FINISHES AVAILABLE–PLEASE CONTACT
• Fits doors 133⁄88 – 133⁄44" (35–44.5 mm) thick with standard 160 or 161 door preparation
• Non-handed• 233⁄88" (60 mm) backset• 233⁄44" (70 mm) backset latch sold separately:
#2610L234: Passage #2642L234: Privacy
• Spring-loaded pop-out edge pull• Privacy model includes latch with integrated
spring-loaded pop-out edge pull and strike• Mounting hardware included: wood screws
DIMENSIONSRound rose: ø 277⁄1616" (62 mm)Square rose (S): 277⁄1616" (62 mm)Faceplate: 1 x 211⁄44" (25.4 x 57 mm);
11⁄44"(6.4 mm) radius corners
MODELS2610: Round, Passage 2642: Round, Privacy
2610S: Square, Passage2642S: Square, Privacy
POCKET DOOR LOCK 2610, 2642
2642 – 26DMODEL FINISH
11P 15 15A 19 26 26D 3
ANTIQUE BRONZE
SATIN NICKEL
ANTIQUE NICKEL
MATTE BLACK
POLISHED CHROME
SATIN CHROME
POLISHED BRASS
OTHER FINISHES AVAILABLE–PLEASE CONTACT
2642-26DPRIVACY
2610-11PPASSAGE
2542C26DPRIVACY
2510C15PASSAGE
2610S-19PASSAGE
2642S-15PRIVACY
2610S / 2642S
15 19 26D
SATIN NICKEL
MATTE BLACK
SATIN CHROME
OTHER FINISHES AVAILABLE–PLEASE CONTACT
2610 / 2642
01.410
201 51 SER 26D KD USERIES FUNCTION STYLE FINISH KEYING LATCH1
(1) U–UNIVERSAL LATCH, CONVERTS TO DRIVE-IN
ER SERIESELECTRONIC DEADBOLT
Certifications • 1 Year limited warranty
Door Thickness • 133⁄88 – 2" (35 – 51 mm)
Handing • Non handed
Backset • 233⁄88 – 233⁄44" (60 – 70 mm), adjustable
Deadbolt • Steel bolt with hardened steel security pin• 1" (25.4 mm) throw
Faceplate • Mortise type, square corner• 111⁄88 x 211⁄44" (29 x 57 mm)
Strike • 111⁄88 x 233⁄44 (29 x 70 mm) wood frame
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
See installation instructions for details
Cylinder • 5-pin, removable cylinder• Weiser keyway, 2 keys
Other keyways and keying options available
Electronic Features
• Battery powered*, low battery indicator• LED illuminated keyboard• Fully programmable from keyboard, no
computer required• For up to 6 users (4 to 10 digit code)• Settings saved in memory• Visual and audio confirmation and notifications• Remote control (98 ft / 30 m range) included• Auto-locking function available
(*) Four (4) AA batteries not included
Operating Temperature
• -4° to 185°F (-20° to 85°C)• 30 to 90% humidity
Rubber gaskets prevent water penetration
Functions 51 Single cylinder, thumbturn
Styles ER–Traditional body, SER–Contemporary body
Finish 11P–Antique bronze, 15–Satin nickel, 15A–Antique nickel, 19–Matte black, 26D–Satin chrome, V3–Polished brass (lifetime)
Other finishes available by special order
REMOTE CONTROLINCLUDED
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-11.
01.410 ER SERIES ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, - REV.2020-11.
SELECTION GUIDE
PARTS & ACCESSORIES
200ERCAdditional remote control with override key. Battery included.
A B C D E F G H
ER 277⁄88 (73)
477⁄88(124)
299⁄1616
(65)133⁄88(35)
711⁄44(184)
21111⁄1616
(68)133⁄44(44)
111⁄1616
(27)
SER 3(76)
499⁄1616
(116)11515⁄1616
(49)111⁄88(29)
711⁄44(184)
21111⁄1616
(68)133⁄44(44)
111⁄1616
(27)IN (MM)
MODEL DESCRIPTION FINISH
201 51 ER Electronic deadbolt with LED keypad & remote, traditional style. K 11P, 15, 15A, 19, 26D, V3
201 51 SER Electronic deadbolt with LED keypad & remote, contemporary style. K 15, 15A, 19, 26DOTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE
FG
E
H
1 2 3 4 5
6 7 8 9 0
B
C
A D
1 2 3 4 5
6 7 8 9 0
B
D
C
A
ER SER
01.420
1150 SC – LHSERIES FINISH HAND1
(1) LH– LEFT HAND; RH– RIGHT HAND
DDL 1150 SERIESDIGITAL LOCKSET
Certifications • 1 Year limited warranty
Door Thickness • 133⁄88 – 2" (35 – 51 mm)
Handing • Handed
Backset • 233⁄44" ( 70 mm) • 233⁄88" (60 mm) – available
Latch • Stainless steel deadlatch• 11⁄22" (12.7 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (29 x 57 mm)
Strike • 111⁄88 x 233⁄44" (29 x 70 mm) • Plastic dust-box
Chassis • Zinc alloy case with rubber seal• Stainless steel mechanical push buttons• Exposed mounting screws
Preparation • Cross bore: 211⁄88" (54 mm)• Edge bore: 1" (25.4 mm)
Cylinder —
Function Exterior lever always locked unless unlocked by entering correct combination or by inside lever.
Lever Style Lever with curved return
Finish SC–Satin chrome Other finishes available by special order
Notes • Recommended for indoor use only• Completely mechanical, no batteries required• Easy combination changes
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-11.
01.420 DDL SERIES ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-02
DIMENSIONS
PARTS & ACCESSORIES
DLSC238Deadlatch bolt, 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (29 x 57 mm) faceplate
DLSC234Deadlatch bolt, 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (29 x 57 mm) faceplate
G
E
F
D
C
B
H
A K
A B C D E F G H K
1150 211⁄88(54)
755⁄1616
(185)211⁄22(64)
1515⁄1616
(33)1313⁄1616
(20)211⁄44(57)
133⁄44(44)
111⁄1616
(27)277⁄1616
(62)IN (MM)
01.422
2230 SCMODEL FINISH
DDL 2200 SERIESDIGITAL LOCKSET
Certifications • 1 Year limited warranty
Door Thickness • 133⁄88 – 2" (35 – 51 mm)• 211⁄44" (57 mm) – available
Handing • Non handed
Backset • 233⁄44" ( 70 mm) • 233⁄88" (60 mm) – available• 2200 : 111⁄88" (28 mm)
Latch • 2200: deadbolt; 77⁄88" (22 mm) throw • 2212: deadbolt with security pin;
1" (25.4 mm) throw• 2230: security deadlatch;
11⁄22" (12.7 mm) throw
Faceplate • Mortise type, square corners• 111⁄88 x 211⁄44" (29 x 57 mm)• 2200: None, not applicable
Strike • T-Type; 111⁄88 x 233⁄44" (29 x 70 mm) • Plastic dust-box• 2200: includes surface strike
Chassis • Zinc alloy case with rubber seal• Stainless steel mechanical push buttons• Exposed mounting screws
Preparation • Special, see installation instructions for details • Trim plate for installation on doors with
211⁄88" (54 mm) preparation – available• 2200: surface mounted, fits any flat surface
door and frame
Cylinder —
Function Exterior knob always locked unless unlocked by entering correct combination, or by turning inside thumb-turn.
Knob Style Flat knob with ridges
Large diameter knob available – see parts & accessories
Finish AB–Antique bronze, PB–Polished brass, SC–Satin chrome, SN–Satin nickel
Other finishes available by special order
Notes • Recommended for indoor use only• Completely mechanical, no batteries required• Easy combination changes
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA- REV.2020-02
01.422 DDL SERIES ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-11.
SELECTION GUIDE
PARTS & ACCESSORIES
DLSC238Deadlatch bolt, 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (29 x 57 mm) faceplate
DLSC234Deadlatch bolt, 233⁄44" (70 mm) backset, 111⁄88 x 211⁄44" (29 x 57 mm) faceplate
DBS238Deadbolt, 233⁄88" (60 mm) backset, 111⁄88 x 211⁄44" (29 x 57 mm) faceplate
DBS234Deadbolt, 233⁄44" (70 mm) backset , 111⁄88 x 211⁄44" (29 x 57 mm) faceplate
DETPMetal 211⁄22 x 611⁄22" (64 x 165 mm) retro-fit trim plate for pre-drilled 211⁄88" (54 mm) doors.
DEPTRRubber 211⁄22 x 611⁄22" (64 x 165 mm) retro-fit trim gasket for pre-drilled 211⁄88" (54 mm) doors.
KNOBEasy-grip knob, 133⁄44" (44 mm) diameter. » Antique brass (KNOBAB)» Polished brass (KNOBBP)
RP2200211⁄44" (57 mm) door kit for DDL 2200.
RP2210211⁄44" (57 mm) door kit for DDL 2212,2230.
A B C D E F G H K L M P Q R
2200
155⁄88(41)
599⁄1616
(143)199⁄1616
(40)133⁄1616 (30)
1515⁄3232
(12)155⁄88(42)
6(152)
177⁄1616
(36)2
(51)
11⁄1616
(2)77⁄88
(22)2525⁄3232
(20)233⁄44(70)
77⁄88(22)
2212 — — — — —
2230 — — — — —
IN (MM)
MODEL DESCRIPTION FINISH
2200 Combination deadbolt lock, surface mounted, 111⁄88" (28 mm) backset SC
2212 Combination deadbolt lock, 233⁄44" (70 mm) backset AB, PB, SC
2230 Combination deadlatch lock, 233⁄44" (70 mm) backset SC, SN
G
E
F
B
A
K
L
M
P
Q
R
G
E
F
D
H
C
D
H
C
B
A
K
G
E
F
B
A
K
L
M
P
Q
R
G
E
F
D
H
C
D
H
C
B
A
K
2212 / 2230 2200
01.500
PF 251 LH – 630SERIES FUNCTION1 HAND FINISH
(1) SEE SELECTION CHART FOR DETAILS (2) LH: LEFT RH: RIGHT LHR: LEFT, REVERSED RHR: RIGHT, REVERSED
Warranty • 1 Year limited warranty
Panel Thickness • For tempered glass panels 55⁄1616 – 11⁄22"(8–12.7 mm) thick
Handing • Handed, field reversible*
(*) Handing conversion is possible only from LH to RH or LHR to RHR (and vice versa). See handing guide.
Spring Latch • Stainless steel, 11⁄22" (12.7 mm) throw• Derlin stripe for smooth operation
Strike • ASA strike – available• Metal frame strike – available• Glass panel strike – available
Strikes not included, sold separately. See Parts & Accessories
Trim • High strength zinc-alloy body• Stainless steel covers
Levers not included, sold separately. See Parts & Accessories
Chassis • Concealed mounting• Shims and gaskets included
Preparation • Glass cut-out required. See installation instructions for details
Cylinder • 5-pin KIK cylinder• Schlage "C" keyway, 2 keys• Removable, rekeyable
Other keyways and keying options available.
Functions 200 Glass panel strike210 Passage251 Entry251P Entry, profile cylinder (less core)
Levers • Wide variety of lever styles• Sold separately – see Parts & Accessories
Finish 630–Satin stainless steel19–Matte black*
(*) Special order. Other finishes also available by special order
PF SERIESGLASS DOOR LOCKS
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA,- REV.2021-06.
PF210PASSAGE
PF251ENTRY (KIK CYLINDER)
PF251PPROFILE CYLINDER
01.500 PF SERIES ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-06.
SELECTION GUIDE
A B C D E
PF210 PF251
255⁄88(67)
611⁄22(165)
577⁄88(150)
77⁄88(22)
55⁄1616
(8)
PF200 255⁄88(67)
3(76)
233⁄88(60)
77⁄88(22)
55⁄1616
(8)IN (MM)
SERIES FUNCTION / DESCRIPTION FINISH 1 / CASE
PF 210 Passage 630, 19* 20
PF 251 Entry, KIK cylinder included K 630, 19* 20
PF 251P Entry, profile cylinder (less core) K 630, 19* 20
PF 200 Strike for glass side panel 630, 19* **(1) OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED. (*) SPECIAL ORDER, MAY REQUIRE ADDITIONAL DELIVERY TIME (**) CONTACT LOCAL REPRESENTATIVE FOR DETAILS. K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE.
OUTSIDE
B
A
B
A
C
E
DD
E
C
INSIDE
Inswing, left (LH)
Handing Guide
Outswing, left reversed (LHR)
Inswing, right (RH)
Outswing, right reversed (RHR)
PARTS & ACCESSORIES
PFL001-32DStraight lever style (sold in pairs).
CBPT1530-SCKD-15Schlage "C" keyway profile cylinder with thumb-turn. For LH/RH PF251P locks.
9203Viro profile cylinder, brass plated. Required for master key systems with PF251P.
ASAC15ASA strike for 133⁄44" to 2" (44.5 mm to 50 mm) door frame. 111⁄44 x 477⁄88" (32 x 124 mm)
PFL018-32D Curved lever style (sold in pairs).
CBPT3131-SCKD-15 Schlage "C" keyway profile cylinder with thumb-turn. For LHR/RHR PF251P lock.
LS01 For metal door frames 133⁄44" to 2" (44.5 mm to 50 mm) thick. Includes dust-box, mounting plate and machine screws.
PF200 Patch fitting lock strike for glass side panel.
PF200PF251
Additional lever styles available by special order - see Architectural Lever Styles. Please contact your local sales representative for details.
01.500ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA,- REV.2021-06.
Ac Bc
Bf
Br Fa
Fb
Uc
Hw Ma
Mf
Ra
Rc
Qk
Ha
Architectural levers may require additional lead times and / or minimum order quantities. Please verify availability with your local sales representative.
PF SERIESARCHITECTURAL LEVER STYLES
01.510
PF 180 – 630SERIES FUNCTION1 FINISH
(1) SEE SELECTION CHART FOR DETAILS
Warranty • 1 Year limited warranty
Panel Thickness • For tempered glass panels 55⁄1616 – 11⁄22"(8–12.7 mm) thick
Handing • Non-handed
Deadbolt • Solid zinc-alloy floor bolt• PF180: round bolt, 99⁄1616" (15 mm) throw• PF181: flat bolt, 1111⁄1616" (17.5 mm) throw
Strike • Steel floor strike• Dust-proof floor strike – available*
(*) For PF180 only. See Parts & Accessories
Trim • High strength zinc-alloy body• Stainless steel covers
Chassis • Concealed mounting• Shims and gaskets included
Preparation • Glass cut-out required. See installation instructions for details
Cylinder • PF180: 4-pin profile double cylinder• PF181: 5-pin profile double cylinder• Yale keyway, 3 keys
Other keyways and keying options available.
Finish 630–Satin stainless steel19–Matte black*
(*) Special order. Other finishes also available by special order
PF SERIESGLASS DOOR FLOOR DEADBOLTS
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA,- REV.2021-06.
PF181FLOOR DEADBOLT
PF180FLOOR DEADBOLT
01.510 PF SERIES ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-06.
SELECTION GUIDE
A B C D E F
PF181 2(51)
655⁄1616
(160)211⁄88(54)
11111⁄1616
(42)1111⁄1616
(17.5)33⁄88(9)
PF180 2(51)
655⁄88(165)
3(76)
99⁄1616
(14.6)99⁄1616
(14.6)33⁄88(9)
IN (MM)
SERIES FUNCTION / DESCRIPTION FINISH 1 / CASE
PF 181 Flat floor bolt, 5-pin profile cylinder K 630, 19* **
PF 180 Round floor bolt, 4-pin profile cylinder K 630, 19* **(1) OTHER FINISHES AVAILABLE, MINIMUM ORDER QUANTITIES AND/OR ADDITIONAL DELIVERY TIMES MAY BE REQUIRED. (*) SPECIAL ORDER, MAY REQUIRE ADDITIONAL DELIVERY TIME (**) CONTACT LOCAL REPRESENTATIVE FOR DETAILS. K KEYED FUNCTION; FULL KEYING SERVICES AVAILABLE.
B
A
C
D
F
C
D
F
B
A
E E
PF180PF181
PARTS & ACCESSORIES
CBPT3131-SCKD-15 Schlage “C” keyway profile cylinder with thumb-turn for PF181 locks.
T840 Aluminum dust-proof strike with spring loaded plunger; 33⁄44" (19 mm) engagement depth. Can be used with PF180. See page 06.305.
DSP / DSPL Adjustable stainless steel dust-proof strike with spring loaded plunger; 33⁄44" (19 mm) engagement depth. Available with locking (DSPL) and non-locking plunger (DSP). Can be used with PF180. See page 06.305.
9203Viro profile cylinder, brass plated. Required for master key systems with PF181.
Exit Device Handing Guide ............................................................................................................................ii Finish Guide ..................................................................................................................................................ii Abbreviation Guide .......................................................................................................................................iii
PUSH PAD EXIT DEVICES
DOREX DX1 Series, Grade 1 .........................................................................................................................02.010 DOREX 9500 Series, Grade 1 .......................................................................................................................02.020
DOREX 8500 Series, Grade 2 .......................................................................................................................02.030
D8DIVISION8 8000 Series, Grade 2 ..............................................................................................................02.040
DOREX DX2 Series, Narrow Stile, Grade 2 ....................................................................................................02.100 1400 Series, Narrow Stile ..............................................................................................................................02.110
2295 Series, Narrow Stile ..............................................................................................................................02.120
CROSSBAR EXIT DEVICES
DOREX NH900 Series, Grade 2 .....................................................................................................................02.200
DOREX 1100 Series, Narrow Stile .................................................................................................................02.210
EXIT DEVICES TABLE OF CONTENTS
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2021-04.i
R20210617
ii
EXIT DEVICES GENERAL INFORMATION
EXIT DEVICE HANDING GUIDE
INSIDEINSIDE
LEFT HAND REVERSED (LHR) RIGHT HAND REVERSED (RHR)
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-12.
FINISH GUIDE
ALUMINUM BRASS DARK BRONZE MATTE BLACKCODE AL, C28, 28 BP, PB, C3, 3 DU, C20D, 20D MB, C19, 19
BHMA* 628, 689 605, 632, 677 649, 650, 690 622, 631
SATIN CHROME SATIN STAINLESS STEELCODE SC, C26D, 26D SS, C32D, 32D
BHMA* 626, 652 630
PAINTED PAINTEDPLATED
ALL FINISHES IMAGES ABOVE ARE PHOTOGRAPHIC OR COLOUR APPROXIMATIONS, DELIVERED PRODUCT MAY VARY. OTHER FINISHES AVAILABLE–PLEASE CONTACT.(*) EQUIVALENT; CODES DIFFER DEPENDING ON BASE MATERIAL
GENERALBS BacksetDIA, ø DiameterKG KilogramsLBS PoundsLH Left handLHR Left hand reversedMAX MaximumMIN MinimumN/A, — Not applicable / Not availableQTY Quantity (usually followed by notes)RH Right handRHR Right hand reversedSQ, SquareWT Weight
/UNIT Number of items per basic unit of sale (bagged or boxed)
/BOX, /BAG Number of UNITS found in an inner carton or bag
/CASE Number of BOXES or UNITS found in an outer (shipping) carton
ABBREVIATION GUIDE
EXIT DEVICES GENERAL INFORMATION
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV. 2020-03.iii
2 DOREX DX1
I
DX1 Series Exit Devices are designed and manufactured for simplicity, strength, durability, aesthetics and installer-friendly innovations.
• Devices and trims are designed for new or retrofit installation into other manufacturers' exit devices and trims.
• Made to comply with the highest safety and security standards in the industry.
• cULus listed for Panic Exit Hardware or 3-hour Fire Rated Exit Hardware.
• Certified ANSI/BHMA A156.3-2014 Grade 1.
A Standard flat/hex key dogging or optional cylinder dogging** available for non-fire rated exit devices.
B Special plastic inserts and rubber bumpers reduce noise.
C Detachable center case allows switching between mechanical and electrical options which replaces the need of buying two complete sets.
D Replaceable cam breaks at a predetermined load to prevent further damage of the trim mechanism. Handing change is simple and easy.
E Stainless steel latch and security deadlatch.
F Center case with maximum versatility, surface and concealed vertical rods can be adjusted inside the center case with an ingenious rod holder design.
DX1
A
H
B
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
3DOREX DX1
G Double cylinder with indicator devices are used as classroom intruder locks, enabling the locking of the outside trim without opening the door.*
H Push bar with integrated end caps and pivot add stability and make the bar move smoothly regardless of where the pressure is applied on push bar. Accessible version is also available to meet the 2010 ADA Standards and Accessible Design to operate the device with 5 lbs of force.*
I Flush end cap design.
G
F
E
D
C
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND MINIMUM ORDER QUANTITIES. ** CYLINDERS SOLD SEPARATELY
4 DOREX DX1
General OverviewDevice MaterialDX1 Series exit devices are furnished standard with a smooth case. Models with a grooved case are available by special order. The two styles are mechanically and dimensionally identical and are available in a wide selection of finishes (see finish chart below).
Available Finishes
Color ANSI/BHMA US B / E / G A / D C / F / H
Satin Stainless Steel 630 32D Stainless Steel, Satin Plated Anodized 1
Satin Chrome* 626 26D Brass, Satin & Plated Plated Anodized 1
Polished Chrome* 625 26 Brass, Polished & Plated Plated Buffed Anodized 1
Oil Rubbed Bronze* 613 10B Bronze, Satin; Dark Oxidized Plated Anodized 1
Satin Bronze* 612 10 Bronze, Satin Plated Anodized 1
Polished Bronze* 611 9 Bronze, Polished Plated Buffed Anodized 1
Satin Brass* 606 4 Brass, Satin Plated Anodized 1
(*) Special order finish, will require additional lead time and minimum order quantities. (1) Aluminum material NOTE: Non-listed finishes are available–please contact your sales representative.
(B) Push Bar Options†:• Embossed "PUSH"• Braille, embossed "CAUTION STAIRWELL"• Red silk screen lettered "EMERGENCY EXIT ONLY - PUSH TO OPEN & SOUND ALARM" (†) Please contact sales representative prior to ordering.
A. Push Bar Integrated End Cap
F. Rail Assembly
E. Center Case Cover
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
Part Material & Finish :
5DOREX DX1
B.Push Bar (see below) C.
Cover Plate
D. End Cap
Available Functions
ANSI/BHMA Number
Operation Trim Option
DX1TT Series Thumb Piece
DX1TE Series Escutcheon
DX1TP Series Pull Handle
01 Exit only, blank escutcheon or plate. DX1TTR01* N N
02 Entrance by trim when bar is locked down/dogged. DX1TTR02* DX1TER02* DX1TPXR2*
03 Entrance by trim. Key retracts latch. Key removable only when locked. (Night Latch)
DX1TTR03 / DX1TTM03* N N
05 Entrance by thumb piece. Key locks/unlocks thumb piece. DX1TTR05 / DX1TTM05* N N
07 Entrance by thumb piece. Inside/outside key locks/unlocks thumb piece. Outside key releases latch. (Double Cylinder)
DX1TTM05* N N
08 Entrance by knob/lever. Key locks or unlocks knob/lever. N DX1TER08/ DX1TEM08 DX1TPR08 / DX1TPM08*
09 Entrance by knob/lever only when released by key. Key removable only when locked. (Night Latch)
N DX1TER09/ DX1TEM09 DX1TPR09 / DX1TPM09*
10 Entrance by knob/lever. Inside/outside Key locks/unlocks knob/lever. Outside key releases latch. (Double Cylinder)
N DX1TER08* / DX1TEM08* N
14 Entrance by trim when latch is released by knob/lever. N DX1TER14 / DX1TEM14* DX1TPR14 / DX1TPM14*
15 Entrance by trim when latch is released by thumb piece. DX1TTR15* / DX1TTM15* N N
See pages 13–18 for more details.
Note: Device function handing is field reversible. Pull latch trim (DX1TH) available - see page 14.
Optional for DX1PV/FV, DX1PW/FW (Not Shown)
G. Latches for Surface Vertical Rods
H. Vertical Rods
Smooth (Standard) Grooved (Option)*
Mechanism Case
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
6 DOREX DX1
Dimensions
Exit Device Trims
Thumb Piece DX1TTR / DX1TTM
Pull Handle DX1TPR / DX1TPM
Escutcheon DX1TER / DX1TEM
Mortise Case
The DX1PM/FM model mortise lock is equipped with a 33⁄44" (19 mm) anti-friction stainless steel latchbolt with reversible handing. It has a non-handed auxiliary bolt for deadlocking and a faceplate with an adjustable bevel. Fits door machined for ANSI A156.115 mortise lock preparation.
8"(203 mm)
233⁄44" (70 mm)
211⁄44"(57 mm)
18" (460 mm)24" (610 mm)
2 11⁄22"(63 mm)
33" (835 mm)45" (1138 mm)
Neutral : 3 1313⁄1616" (97 mm)Depressed : 3 11⁄1616" (78 mm)
2 11⁄44"(57mm)
1411⁄44"(361 mm)
51515⁄1616"(150.3 mm)
3"(77 mm)
2"(50 mm)
2 11⁄44"(55 mm)
13 11⁄22"(341 mm)
2 11⁄44"(58 mm)
2 33⁄44"(70 mm)
533⁄88"(138 mm)
11"(280 mm)
33⁄44"(19 mm)
33⁄88"(10 mm)
8"(203 mm)
111⁄44"(32 mm)
455⁄1616"(110 mm)
555⁄88"(144 mm)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
7DOREX DX1
DX1PR/FR SERIESRIM EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors• ADA compliant model available
Center Case & Rail Assembly
• Heavy wrought steel center case • Adjustments accessible through center case after
installation• Aluminum rail assembly, field sizable
Handing • Non-handed• Except for double-cylinder* option• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 – 8 ft (2134 – 2438 mm) – standard
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Center Latch • Stainless steel, 33⁄44" (19 mm) throw• Deadlocking
Strike • PANIC: Steel, roller type #DXAS106 –standard• FIRE: Steel, roller type #DXAS108 –standard
See DX1 Accessories, p.19-21.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – option*
Cylinder • NOT included, sold separately
See DX1 Cylinders, p. 22.
Mounting Hardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard 1
• Shims – standard
(1) With fire model only. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors.
See DX1 Accessories, p.19-21.
Electrical Options*
• Alarm kit• Delayed egress• Electronic latch retraction• Request to exit • Signal switch• Electrical mortise lock
(*) Special order. See DX1 Electrical, p. 23-29.
Trims • Compatible trims sold separately, easy to mix and match
See DX1 Trims, p.13-18.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
Double Cylinder with Indicator*
An indicator device installed on the inner side of door informs whether the outside trim is in a locked or unlocked state.
Requires DX1TER08D Outside Trim. When only the inside key cylinder is required to lock or unlock the outside trim and no outside cylinder operation is necessary for use with DX1TER08 (outside trim will be with blank mortise cylinder).
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
8 DOREX DX1
DX1PV/FV SERIESSURFACE VERTICAL ROD EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case with top and bottom rod adjustors
• Adjustments accessible through center case after installation
• Aluminum rail assembly, field sizable
Handing • Non-handed• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 ft (2134 mm) – standard• 8 ft (2468 mm) – option*• 10 ft (3048 mm) – option*
See DX1 Accessories, p. 19-21.
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Top Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Bottom Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Round slide bolt – available*• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Fire Latch • Available for door openings 8 ft (2438 mm) wide x 8 ft (2438 mm) high
• Included with Less Bottom Rod (L) option
See DX1 Accessories, p. 20.
Strikes • PANIC » Top: Steel, roller type #DXAS106 – standard » Bottom: Steel, #DXAS227 – standard
• FIRE » Top: Steel, roller type #DXAS108 – standard » Bottom: Steel, #DXAS227F – standard
See DX1 Accessories, p. 19-21.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – available
Cylinder • NOT included, sold separately
See DX1 Cylinders, p. 22.
Mounting Hardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard 1
• Shims – standard
(1) With fire model only. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors.
See DX1 Accessories, p. 19-21.
Electrical Options*
• Alarm kit• Delayed egress• Electronic latch retraction• Request to exit • Signal switch• Electrical mortise lock
(*) Special order. See DX1 Electrical, p. 23-29.
Trims • Compatible trims sold separately, easy to mix and match
See DX1 Trims, p. 13-18.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
9DOREX DX1
DX1PC/FC SERIESCONCEALED VERTICAL ROD EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case with top and bottom rod adjustors
• Adjustments accessible through center case after installation
• Aluminum rail assembly, field sizable
Handing • Non-handed• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 ft (2134 mm) – standard• 8 ft (2468 mm) – option*• 10 ft (3048 mm) – option*
See DX1 Accessories, p. 19-21.
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Top Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Bottom Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Round slide bolt – available*• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Fire Latch • Available for door openings 8 ft (2438 mm) wide x 8 ft (2438 mm) high
• Included with Less Bottom Rod (L) option
See DX1 Accessories, p. 20.
Strikes • PANIC » Top: Steel, #DXAS216 –standard » Bottom: Steel, #DXAS227 –standard
• FIRE » Top: Steel, #DXAS216 –standard » Bottom: Steel, #DXAS227F –standard
See DX1 Accessories, p. 19-21.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – available
Cylinder • NOT included, sold separately
See DX1 Cylinders, p. 22.
Mounting Hardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard 1
• Shims – standard
(1) With fire model only. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors.
See DX1 Accessories, p. 19-21.
Electrical Options*
• Alarm kit• Delayed egress• Electronic latch retraction• Request to exit • Signal switch • Electrical mortise lock
(*) Special order. See DX1 Electrical, p. 23-29.
Trims • Compatible trims sold separately, easy to mix and match
See DX1 Trims, p. 13-18.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
10 DOREX DX1
DX1PW/FW SERIES3-POINT LATCHING EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case with top and bottom rod adjustors.
• Adjustments accessible through center case after installation
• Aluminum rail assembly, field sizable
Handing • Non-handed• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 ft (2134 mm) – standard• 8 ft (2468 mm) – option*• 10 ft (3048 mm) – option*
See DX1 Accessories, p. 19-21.
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Center Latch • Stainless steel, deadlocking, 33⁄44" (19 mm) throw
Top Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Bottom Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Round slide bolt – available*• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Fire Latch • Available for door openings 8 ft (2438 mm) wide x 8 ft (2438 mm) high
• Included with Less Bottom Rod (L) option
See DX1 Accessories, p. 20.
Strikes • PANIC » Top/Middle: Steel, roller type #DXAS106 – standard » Bottom: Steel, #DXAS227 – standard
• FIRE » Top/Middle: Steel, roller type #DXAS108 – standard » Bottom: Steel, #DXAS227F – standard
See DX1 Accessories, p. 19-21.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – option*
Cylinder • NOT included, sold separately
See DX1 Cylinders, p. 22.
MountingHardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard1
• Shims – standard
(1) With fire model. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors.
See DX1 Accessories, p. 19-21.
Electrical Options*
• Alarm kit• Delayed egress• Electronic latch retraction• Request to exit • Signal switch• Electrical mortise lock
(*) Special order. See DX1 Electrical, p. 23-29.
Trims • Compatible trims sold separately, easy to mix and match - See DX1 Trims, p. 13-18.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
11DOREX DX1
DX1PM/FM SERIESMORTISE LOCK EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case. • Adjustments accessible through center case after
installation• Aluminum rail assembly, field sizable
Handing • Non-handed• Except for double-cylinder* option• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7–8 ft (2134–2438 mm) – standard
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Center Latchbolt • Stainless steel, 33⁄44" (19 mm) throw• Anti-friction• Deadlocking
Strike • Steel, #DXAS306 –standard
See DX1 Accessories, p. 19-21.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – option*
Mortise Case • Mortise lock and strike included• Fits ANSI/BHMA A156.115 door preparation• Adjustable faceplate for bevelled doors up to 11⁄88" over 2"
(3 mm over 51 mm)• Handed; field reversible
See DX1 Dimensions, p. 6.
Cylinder • NOT included, sold separately
See DX1 Cylinders, p. 22.
MountingHardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard 1
(1) With fire model only. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors.
See DX1 Accessories, p. 19-21.
Electrical Options*
• Alarm kit• Delayed egress• Electronic latch retraction• Request to exit • Signal switch• Electrical mortise lock
(*) Special order. See DX1 Electrical, p. 23-29.
Trims • Compatible trims sold separately, easy to mix and match - See DX1 Trims, p. 13-18.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
Double Cylinder with Indicator*
An indicator device installed on the inner side of door informs whether the outside trim is in a locked or unlocked state.
Requires DX1TTM05* or DX1TEM08D* outside trim. When only the inside key cylinder is required to lock or unlock the outside trim and no outside cylinder operation is necessary for use with DX1TTM15* or DX1TEM14.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
12 DOREX DX1
Fire Door Applications and Listings
Maximum Door Opening Applications and Listings
Exit Device Door Material
Single Door Double Door
With mullion 2 Vertical Rods Same Direction
Vertical Rods / Mortise Same Direction
2 Vertical Rods Double Egress
DX1FR RIM
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
DX1FV SVR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX1FVL LBR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX1FC CVR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX1FCL LBR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX1FM MORTISE
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
DX1FW 3PT
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
Metric conversion: 4' (1219 mm), 8' (2438 mm), 10' (3048 mm).
Notes:
1. Fire exit device conforms to UL10C, and UBC7-2.2. Fire exit device is applicable for wood door with 1 11⁄22-hour or 20-min fire rating. 3. Consult with door manufacturer for specific limitations on fire door assemblies.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
13DOREX DX1
DX1TP Series Pull Handle
DX1TT Series Thumb Piece
DX1TE Series Escutcheon
Trim OptionsDX1
14 DOREX DX1
ANSI/BHMA 01 02 03 0507
15
Operation Exit only, blank escutcheon.
Entrance by trim when actuating bar is locked down/dogged. (Dummy)
Entrance by trim when latch is released by key. Key removable only when locked. (Night Latch)
Latch released by key. Key removable only when locked.*Pull required (not included)
Entrance by thumb piece. (Classroom) (05) Key locks or unlocks thumb piece. (07) Inside/outside key locks/unlocks thumb
piece. Outside key releases latch.1
Entrance by trim when latch is released by thumb piece. Thumb piece always active, no cylinder. (Passage)
Trim No. DX1TTR 01* DX1TTR 02* DX1TTR 03 DX1TTM 03* Cylinder only *Not included - see p. 22
DX1TTR 05 DX1TTM 05* DX1TTR 15* DX1TTM 15*
Cylinder Type Rim Mortise Rim/Mortise Rim Mortise
Device No. DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR
DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV
DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC
DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW
DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM
DX1TT Series Thumb Piece Trim
Features
• Trims are furnished with wrought plate and cast solid or forged grips.
• Trims are designed to retrofit into other manufacturers' devices.• Trims are cULus certified for ANSI/BHMA A156.3-2014
Grade 1 and 3-hour Fire Exit Hardware.• Trims are through bolted and covering 161 and 86 cutouts. • Satin stainless steel (630) finish – other finishes available.• Cylinder not included, see page 22.• For Trim dimensions see page 6.• To order, see page 30.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
15DOREX DX1
ANSI/BHMA 01 02 03 0507
15
Operation Exit only, blank escutcheon.
Entrance by trim when actuating bar is locked down/dogged. (Dummy)
Entrance by trim when latch is released by key. Key removable only when locked. (Night Latch)
Latch released by key. Key removable only when locked.*Pull required (not included)
Entrance by thumb piece. (Classroom) (05) Key locks or unlocks thumb piece. (07) Inside/outside key locks/unlocks thumb
piece. Outside key releases latch.1
Entrance by trim when latch is released by thumb piece. Thumb piece always active, no cylinder. (Passage)
Trim No. DX1TTR 01* DX1TTR 02* DX1TTR 03 DX1TTM 03* Cylinder only *Not included - see p. 22
DX1TTR 05 DX1TTM 05* DX1TTR 15* DX1TTM 15*
Cylinder Type Rim Mortise Rim/Mortise Rim Mortise
Device No. DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR
DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV
DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC
DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW
DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM
Standard K type(Option)*
Lever / Grip Options
(1) Double Cylinder
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
16 DOREX DX1
OperationEntrance by trim when actuating bar is locked down/dogged. (Dummy)
Entrance by knob or lever. (Classroom)(08) Key locks or unlocks knob/lever.(10) Inside or outside key locks/unlocks knob or lever. Outside key releases latch.1
Entrance by knob/lever only when released by key. Key removable only when locked. (Night Latch)
Entrance by trim when latch is released by knob/lever.Always active, no cylinder. (Passage)
Entrance by pull tab. Key locks/unlocks the pull tab. (Classroom)
Trim No. DX1TER 02* DX1TER 08 DX1TEM 08 DX1TER 09 DX1TEM 09 DX1TER 14 DX1TEM 14 DX1THM 08*
Cylinder Type Mortise Mortise Rim Mortise Mortise
Device No.DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR
DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV
DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC
DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW
DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM
Features
• Escutcheon and lever with sleek and seamless design produced by casting or forging.
• Trims are designed to retrofit into other manufacturers' devices.• Trims are through bolted and covering 161 and 86 cutouts.• Handing field reversible.• Trims are cULus certified for ANSI/BHMA A156.3-2014
Grade 1 and 3-hour Fire Exit Hardware.• Satin chrome (626) finish – other finishes available.• Cylinder not included, see page 22.• For Trim dimensions see page 6.• To order, see page 30.
DX1TE Series Escutcheon Trim
ANSI/BHMA 02 0810
09 14 08
(1) Double Cylinder
The DX1TER/TEM (Functions 08, 10 only)includes an internal breakable cam which breaks when a predetermined load is applied to the outside lever handle when locked without damaging the trim or compromising security. The cam can easily be replaced - #DXACAMED03.
Breakable Cam
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
BREAKABLE CAM
17DOREX DX1
OperationEntrance by trim when actuating bar is locked down/dogged. (Dummy)
Entrance by knob or lever. (Classroom)(08) Key locks or unlocks knob/lever.(10) Inside or outside key locks/unlocks knob or lever. Outside key releases latch.1
Entrance by knob/lever only when released by key. Key removable only when locked. (Night Latch)
Entrance by trim when latch is released by knob/lever.Always active, no cylinder. (Passage)
Entrance by pull tab. Key locks/unlocks the pull tab. (Classroom)
Trim No. DX1TER 02* DX1TER 08 DX1TEM 08 DX1TER 09 DX1TEM 09 DX1TER 14 DX1TEM 14 DX1THM 08*
Cylinder Type Mortise Mortise Rim Mortise Mortise
Device No.DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR
DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV
DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC
DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW
DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM
ANSI/BHMA 02 0810
09 14 08
Standard Q type(Option)*
Lever Options
A type (Option)*
K type(Option)*
B type (Option)*
P type(Option)*
Knob Options
T type (Option)*
Breakable Cam
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
Indicate handing when ordering.
18 DOREX DX1
ANSI/BHMA 02 08 09 14
Operation Entrance by trim when actuating bar is locked down/dogged. (Dummy)
Entrance by pull handle. Key locks or unlocks pull grip. (Classroom)
Entrance by pull handle only when released by key. Key removable only when locked. (Night Latch)
Entrance by trim when latch is released by pull handle. Always active, no cylinder. (Passage)
Trim No. DX1TPR 02* DX1TPR 08 DX1TPM 08* DX1TPR 09 DX1TPM 09* DX1TPR 14 DX1TPM 14*
Cylinder Type Mortise Mortise
Device No. DX1 PR/FR DX1 PR/FR DX1 PR/FR DX1 PR/FR
DX1 PV/FV DX1 PV/FV DX1 PV/FV DX1 PV/FV
DX1 PC/FC DX1 PC/FC DX1 PC/FC DX1 PC/FC
DX1 PW/FW DX1 PW/FW DX1 PW/FW DX1 PW/FW
DX1 PM/FM DX1 PM/FM DX1 PM/FM DX1 PM/FM
DX1TP Series Pull Handle
Features
• For application with existing DX1 Series Exit Devices.• Ease of installation. • Non-handed.• Trims are cULus certified for ANSI/BHMA A156.3-2014
Grade 1 and 3-hour Fire Exit Hardware.• Satin stainless steel (630) finish – other finishes available.• Cylinders not included, see page 22.• For Trim dimensions see page 6.• To order, see page 30.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
19DOREX DX1
AccessoriesRim Device - Strikes
P/N. DXAS106Rim StrikeMiddle strike for DX1PR, DX1PW. Top Strike for DX1PV, DX1PW.P
P/N. DXAS136*Overlapping Rim StrikeAvailable for DX1PR, DX1PV and DX1PC in double door applica-tions with door coordinator and no mullion.P
1 ¼" (32 mm) 13⁄16" (20.5 mm)
2 7⁄8
" (73
.4 m
m)
2 1⁄8
" (54
mm
)
P/N. DXAS106Z*Rim StrikeOptional for DX1PR. Top Strike for DX1PV, DX1PW.P
1 ¼" (32 mm) 7⁄8" (22 mm)
2 7⁄8
" (73
.4 m
m)
2 1⁄8
" (54
mm
)
P/N. DXAS108Rim StrikeMiddle strike for DX1FR and DX1FW. Top Strike for DX1FV, DX1FW. For double door DX1FR/PR or DX1FW/PW with mullion.P
1 ½" (38 mm) 7⁄8" (22 mm)
3" (7
7 m
m)
2 1⁄8
" (54
mm
)
1 5⁄8
" (40
mm
)
1 7⁄8" (47 mm)
3⁄8" (9.5 mm)1 1⁄8" (27 mm)
3 ¼
" (83
mm
)
2 1⁄8
" (54
mm
)
P Panic Application Fire Application
P/N. DXAS227/227FBottom StrikeStandard for DX1PV/FV; DX1PC/FC, DX1PW/FW.P
Bottom Strike – Pullman
P/N. DXAS224*Bottom StrikeOptional for DX1PV and DX1PW. (Grade 2)P
5⁄8" (15 mm)
2 ½
" (64
mm
)
1 7⁄8
" (47
mm
) 3⁄
8" (9
.5 m
m)
2 1⁄8" (54 mm)
2 ¾
" (70
mm
)1
¼" (
32 m
m)
Vertical Rod (VR) Device - Strikes
Top Strike
P/N. DXAS216Top StrikeFor DX1PC/FC.P
1 ¼" (32 mm)
1 5⁄8
" (40
mm
)5⁄8
" (16
mm
)
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
1 ½" (38 mm) 7⁄8" (22 mm)
3" (7
7 m
m)
2 1⁄8
" (54
mm
)
1 5⁄8
" (40
mm
)
1 7⁄8" (47 mm)
3⁄8" (9.5 mm)1 1⁄8" (27 mm)
3 ¼
" (83
mm
)
2 1⁄8
" (54
mm
)
P/N. DXAS225*Bottom StrikeFor DX1PV/FV, DX1PC/FC, DX1PW/FW with round slide bolt. (Grade 2)P
P/N. DXAS226*Bottom StrikeOptional for DX1PV/FV, DX1PC/FC, DX1PW/FW with round slide bolt.(Grade 2)P
1 ¼" (32 mm)
5⁄8" (16 mm)
1 5⁄8
" (40
mm
)1" (25.4 mm)
¾" (
19 m
m)
¾" (19 mm)
Bottom Strike - Round
20 DOREX DX1
P Panic Application Fire Application
P/N. DXKG6010*For DXAS106 Rim Strike.Two (2) pieces furnished standard.
P/N. DXKG6050*For DX1PC/FC top & bottom latch strikes.Sixteen (16) pieces furnished standard for Top and Bottom latches. Eight (8) pieces furnished standard for LBR.
P/N. DXKG6030*For DXAS108 Rim Strike.Two (2) pieces furnished standard.
Shims
Accessories
Device Specification Qty.
Without Trim DX1PR/FR DXKB1024 (No. 10-24) 8
DX1PV/FV DXKB1024 (No. 10-24) DXKB4120 (No. 1/4-20)
6 4
DX1PC/FCDX1PM/FM
DXKB4120 (No. 10-24) 6
DX1PW/FW DXKB1024 (No. 10-24) DXKB4120 (No. 1/4-20)
6 4
With Trim DX1PR/FR DXKB1024 (No. 10-24) 2
DX1PV/FV DXKB1024 (No. 10-24) DXKB4120 (No. 1/4-20)
2 4
DX1PC/FCDX1PM/FM
DXKB1024 (No. 10-24) 2
DX1PW/FW DXKB1024 (No. 10-24) DXKB4120 (No. 1/4-20)
2 4
DXKB1024(No. 10-24)
DXKB4120(No. 1/4-20)
Fastener/Sex Nut Bolts (SNB)
Specify Sex Nut Bolts (SNB) where recommended or when required by the door manufacturer.Sex Nuts Bolts (SNB) are furnished with DXKB1024 (No. 10-24) for device or DXKB4120 (No. 1/4-20) for top rod latch and bottom rod latch.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
Mortise Device - Strikes
P/N. DXAS336*StrikesFor use on 133⁄44" (45 mm) thick double door with coordinator and astragal.P
P/N. DXAS306StrikesStandard for use on 133⁄44" (45 mm) or 211⁄44" (57 mm) single door and 211⁄44" (57 mm) double door with coordinator.P
1 ¾" (45 mm)
1 ¼" (32 mm)
4 7⁄8
" (12
3.5
mm
)
4 1⁄8
" (10
5 m
m)
1 ½" (38 mm)4
7⁄8" (
123.
5 m
m)
1 ¼" (32 mm)
4 1⁄8
" (10
5 m
m)
Auxiliary Fire Bolt/Latch
P/N. DXAFLHeat activated. Used in Less Bottom Rod (L) option for fire exit devices. Included when ordering Less Bottom Rod (L) option.For door openings up to (WXH) 8x8 ft.
21DOREX DX1
AccessoriesTop Rods
Device Part No. Rod Length For Door Height
DX1PV/FV DX1PW/FW
DXAVRT020*(included with device)
3611⁄88" (916 mm) 7'
DXAVRT030* 4811⁄88" (1221 mm) 8'
DXAVRT030* Add: DXAVRT040*†
4811⁄88" (1221 mm) Add: 24" (609 mm)
10'
DX1PC/FC DXACRT070*(included with device)
37" (940 mm) 7'
DXACRT080* 49" (1245 mm) 8'
DXACRT080* Add: DXACRT050*†
49" (1245 mm) Add: 2377⁄88" (605 mm)
10'
(†) Extension rod is used with included rod.
Bottom RodsFor exit device location at 39 55⁄88" (1006 mm) from finished floor.
Device Part No. Rod Length
DX1PV/FV DX1PW/FW
DXAVRB010(included with device)
3177⁄88" (807 mm)
DX1PC/FC DX1AVRB010*(included with device)
3499⁄3232" (870 mm)
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
22 DOREX DX1
Cylinder Collar
P/N : 817DFor use on DX1TT 03 / 05 / 07 Thumb Piece Trim.
DX1PC/FC with DX1TER08 Escutcheon Trim and DX1PM/FM Escutcheon Trim require specialized cylinder collars.
For special door thickness applications and specification details, please contact your local sales representative.
SFIC Core
Interchangeable cores are included with housings.
Specify, 6 or 7 pin, uncombinated (0-bitted) or less core.
Please contact your local sales representative for details and keying services.
Cylinders are not furnished standard with the device or trim and must be specified when required. Cylinders are Schlage® C keyway, 6-pin standard, and are available in satin chrome (626) finish. Interchangeable Cores (SFIC) are also available. Please consult your local sales representative prior to specifying to ensure proper selection or for additional keying services.
Cylinder Type Exit Device Applications
Trim Cylinder Cyl. Length (Part/no.)
Cylinder Cam
Mortise Cylinder
SFIC Standard
03* / 05* / 07 for DX1 PM/FM
DX1 TTStandard 133⁄88" (MC138†) DXACAM ASFIC 133⁄88" (DXAICMH138J†) J**
08 for DX1PR/FR, DX1PV/FV, DX1PC/FC, DX1PW/FW DX1 TE
Standard 111⁄88" (MC118) DXACAM B
SFIC 133⁄88" (DXAICMH138F†) F**
08 / 09 for DX1 PM/FM
Standard 155⁄88" (MR225) DXACAM ASFIC See note 1 J**
08 for All Devices
DX1 TP
Standard 111⁄88" (MC118) DXACAM DSFIC 133⁄88" (DXAICMH138H†) H**
09 for All Devices
Standard 111⁄88" (MC118) DXACAM CSFIC 133⁄88" (DXAICMH138G†) G**
Cylinder Dogging All DevicesStandard 111⁄44" (MC114) DXACAM ASFIC 133⁄88" (DXAICMH138J†) J**
Rim Cylinder
SFIC Standard
03* / 05* for DX1PR/FR, DX1PV/FV, DX1PC/FC, DX1PW/FW
DX1 TTStandard 233 ⁄88" Tailpiece (MR118)
SFIC 311⁄88" Tailpiece (9807H)
09 for DX1PR/FR, DX1PV/FV, DX1PC/FC, DX1PW/FW
DX1 TEStandard 233 ⁄88" Tailpiece (MR118)
SFIC 311⁄88" Tailpiece (9807H)
Note 1. Use 111⁄22" for door thickness 133⁄44"~177⁄88" (45~48 mm), or 133⁄44" for door thickness 177⁄88"~211⁄44" (48~57 mm). Please contact representative for details.
* Must use with Cylinder Collar (Part/No. 817D). ** Fixed cam, not available separately.† Special order - will require additional lead time and/or minimum order quantities.
Cylinder Cam
Cam No. DXACAM A DXACAM B DXACAM C DXACAM D
Illustration
YX
Y
X
Y
X
Y
X
Cam No. J F G H
IllustrationX
Y Y
X
Y
XX
Y
Dimension X=0.250" (6 mm) Y=0.625" (15 mm)
X=0.375" (9.5 mm) Y=0.750" (19 mm)
X=0.625" (16.4 mm) Y=0.563" (13.6 mm)
X=0.1875" (4.4 mm) Y=0.4375" (11.9 mm)
Cylinders
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
23DOREX DX1
Electrical
EL provides the ability to remotely retract the latchbolt. Continuous duty solenoid can retract latchbolts under condition of unlatching or continually dogging. The EL option can be applied with card readers, toggles or key switches, push buttons and fire alarm systems. PS100 or compatible power supply is required for the use of EL option.
• cULus Listed for Panic and Fire• EL is available with manual Flat/Hex Key for Panic Exit
Devices.
Solenoid Specifications:• Current Pulse (0.3 seconds): 24 VDC, 16 Amp.• Continuous: 24 VDC, 0.25 Amp
Requires PS100 or compatible power supply.
Applicability:For all DX1 Exit Devices.
To order:See How To Order, p. 30.
Electric Latch Retraction
EL (Electrical Dogging)
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
24 DOREX DX1
Micro-switch Detecting Push BarTwo internal switches are mounted into the device.One switch is designed to monitor Push Bar assembly. When there is unauthorized use of the device, the alarm will sound once the switch has been activated.
The other switch is to connect with the 111⁄44" (31.75 mm) Mortise Cylinder with straight cam when alarm has been triggered. A power supply must be set from the frame to the door.
• cULus Listed for Panic and Fire
Electrical Ratings:24 VDC, 2 Amp SPDT.SPDT (Single Pole, Double Throw).
Requires PS100 or compatible power supply.
ApplicabilityFor all DX1 Exit Devices.
To order:See How to Order, p. 30.*Specify handing and finish.
Signal Switch
SS
EMERGENCY EXITPUSH TO OPEN & SOUND ALARM
SORTIE DE SECOURSPOUSSEZ POUR OUVRIR ET SONNER L'ALARME
Push bar label.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
Electrical
25DOREX DX1
Electrical
The alarm exit provides a simple way to audibly monitor the use of an exit device. The unit contains an alarm which is activated when the push bar is depressed. The alarm sounds at 85 db. The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal. Can also be powered using the PS100 or compatible power supply.
• cULus Listed for Panic and Fire
The AL requires a standard 111⁄44" (31.75 mm) mortise cylinder which is used as a key switch to perform the following functions:
• Silence the alarm after activation.
• Deactivate the alarm for continuous unmonitored egress.
The AL is available with 2 optional circuit boards:
• External Inhibit (EI) allows the use of external switch to be used to arm, disarm and reset the alarm.
• Auto Reset (AR) rearms the alarm after a preset time. AR default setting time is 5 minutes, and can be manually switched to 111⁄22 or 3 minutes.
Applicability:For all DX1 Exit Devices for 3 ft to 4 ft wide doors.
To order:Configured exit devices with alarm kits are available with a choice of two switch kits, RX or LM. RX monitors the push bar and LM monitors the latch. See How to Order, p. 30.
The alarm exit is also available in kits for retrofit on existing DX1 devices - see ordering chart below.
Alarm Exit
AL
DXA KA L 3 – 630SERIES STYLE TYPE MONITOR SIZE FINISH
SMOOTH SURFACE (DEFAULT)G - GROOVED SURFACE*
3 - 3FT DEVICE4 - 4FT DEVICE*
RX MONITOR (DEFAULT)L - LM MONITOR
630 - SATIN STAINLESS STEEL (32D)626 - SATIN CHROME (26D)*613 - OIL RUBBED BRONZE (10B)*605 - POLISHED BRASS (3)*
EMERGENCY EXITPUSH TO OPEN – ALARM WILL SOUND
SORTIE DE SECOURSPOUSSEZ POUR OUVRIR – ALARME SONNERA
Door label.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
26 DOREX DX1
Micro-switch Detecting Push BarThe RX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the push bar. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply.
• cULus Listed for Panic and Fire
Electrical Ratings:
Switch rate: 24 VDC, 3 Amp SPDT.
SPDT (Single Pole, Double Throw).
Requires PS100 or compatible power supply.
Applicability:For all DX1 Exit Devices.
To order:
See How To Order, p. 30.
Micro-switch Detecting LatchboltThe LM feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the latchbolt. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply.
• cULus Listed for Panic and Fire
Electrical Ratings:
Switch rate: 24 VDC, 3 Amp SPDT.
SPDT (Single Pole, Double Throw).
Requires PS100 or compatible power supply.
Applicability:For all DX1 Exit Devices.
To order:
See How To Order, p. 30.
Request to Exit Latchbolt Monitoring
RX LM
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
Electrical
27DOREX DX1
The Delayed Egress Exit Device provides a controlled egress for openings which require panic or fire exit hardware for safe egress. It is a self-contained exit device that, when armed, will deny exit to unauthorized personnel for 15 or 30 seconds, while simultaneously sounding a local or remote audible alarm. The Remote Monitoring feature will alert the security personnel that an attempt is being made to exit the opening. After the 15 (or 30) second delay of egress period, the device will function as a standard exit device for safe egress.
• ULus Listed for Panic and Fire
Operation:The device secures the door in the locked mode with a red LED indicating locked status. Depressing the Push bar by accident or for less than the nuisance delay time will sound the alarm without initiating the alarm sequence. Depressing the Push bar with less than 15 pounds pressure, for longer than the nuisance delay time will initiate an irreversible local audible beeping tone and a visual Red indicator until the device releases. After the delay egress time, the lock releases and the alarm changes to a steady tone which continues to alarm until reset. The remote monitoring contact output can be used to alert security personnel.
Note:A "30 Seconds" decal is provided when the 30-second delay option is specified.
Solenoid Specifications:• Current Pulse (0.3 seconds): 24 VDC, 16 Amp.• Continuous: 24 VDC, 0.37 Amp
Requires PS100 or compatible power Supply.
Applicability:For all DX1 Exit Devices.
To order:
See How To Order, p. 30.
Delayed Egress Device
DE
Electrical
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
PUSH UNTIL ALARMDOOR CAN OPEN IN 15 SECONDS
POUSSER JUSQU’A L’ALARME PORTE PEUT OUVRIR EN 15 SECONDES
Door label.
28 DOREX DX1
Electrified trim with integrated lock/unlock option. Trim can be used for all DX1 Series models. Available as fail-locked (FL) or fail-unlocked (FU).
Electrical Ratings:
Solenoid current: 24 VDC, 0.25 Amp.
12 VDC, 0.5 Amp.To order:See How To Order, p. 30.
Features
Electrical Trim
ANSI/BHMA 09 14
DX1ETE Series Electrical Trim
Operation Electrified trim with integrated lock/unlock option. Entrance by lever only when released by key or electrical signal. Key removable only when locked. (Night Latch)
Electrified trim with integrated lock/unlock option. Entrance by trim when latch is released by electrical signal.
Trim No. DX1ETER 09* DX1ETEM 09* DX1ETER 14* DX1ETEM 14*
Cylinder Type RIM Mortise
Device No. DX1 PR/FR DX1 PR/FR
DX1 PV/FV DX1 PV/FV
DX1 PC/FC DX1 PC/FC
DX1 PM/FM DX1 PM/FM
DX1 PW/FW DX1 PW/FW
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
29DOREX DX1
The Electric Mortise Exit Devices can control entry to remote locking and unlocking the outside trim or an automatic fire alarm system.The remote has two main functions:1. To monitor the lock or unlock status through SPDT signal.2. To monitor the auxiliary latchbolt status through SPDT signal.The outside trim cylinder can retract the latchbolt as a night latch func-tion.
The Electric Mortise Exit Device is available with the following electrical options:• EM - Electric lock/unlock with switches to monitor the outside trim
(locked or unlocked) and to monitor the latchbolt.• SS - Latchbolt and trim locked or unlocked monitoring.
Mortise Case Only:DX1M-7000* - Mortise case for DX1EMPM/FM model.DX1M-SS7000* - Mortise case for DX1SSPM/FM (Signal Switch) model.
Electrical Ratings:Mortise Lock is furnished standard as Fail Secure (FSE). When power is off the trim is locked. Power is applied to unlock the trim. May be field converted to a Fail Safe (FS) mode. (FS) - power is applied to lock the trim.
• Solenoid current: 24 VDC, 0.25 Amp.
12 VDC, 0.5 Amp.
• Switch rate: 24 VDC, 2 Amp SPDT.
SPDT (Single Pole, Double Throw).
Applicability:For use with DX1PM/FM.
To order:
Please contact your sales representative.
Electric Mortise Lock
Wiring Diagram
SS Mortise FunctionEM Mortise Function
BRIDGE RECTIFIEROPTIONAL - REQUIRED IF POWEREDBY AC. AVAILABLE IN 24 VOLT VERSION.(Must be specified when ordering)
AUXILIARY LATCHBOLT MONITORINGNORMALLY OPEN /NORMALLY CLOSED SWITCHLOCK / UNLOCK MONITORINGNORMALLY OPEN /NORMALLY CLOSED SWITCH
AUXILIARY LATCHBOLT MONITORINGNORMALLY OPEN /NORMALLY CLOSED SWITCH
LOCK / UNLOCK MONITORINGNORMALLY OPEN /NORMALLY CLOSED SWITCH
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
30 DOREX DX1
DX 1 AL P V L 3 7 C – 630 HSERIES STYLE ELECTRIC RATING TYPE ROD/LATCH WIDTH HEIGHT HAND DOGGING FINISH STRIKE
BLANK = NOT REQUIRED
AL - ALARM EXIT*DE - DELAYED EGRESS*EM - ELECTRIC MORTISE*EL - ELECTRIC LATCH RETRACTION*LM - LATCHBOLT MONITORING*RX - REQUEST TO EXIT*SS - SIGNAL SWITCH*
SEE P.23–27
P - PANIC EXITF - FIRE EXIT
R - RIMV - SURFACE VERTICAL RODC - CONCEALED VERTICAL RODM - MORTISEW - 3 POINTD - DUMMY, INACTIVE*DA - DUMMY, ACTIVE*
SEE P.7–11
3 - 3 FT DEVICE4 - 4 FT DEVICE*
BLANK = (PANIC DEFAULT) HEX KEY DOGGING (FIRE DEFAULT) LESS DOGGING
C - CYLINDER DOGGING* (CYLINDER NOT INCLUDED)
L - LESS DOGGING*
630 - SATIN STAINLESS STEEL (32D)626 - SATIN CHROME (26D)*625 - POLISHED CHROME (26)*613 - OIL RUBBED BRONZE(10B)*612 - SATIN BRONZE (10)*611 - POLISHED BRONZE (9)*606 - SATIN BRASS (4)*605 - POLISHED BRASS (3)*
SEE P.4
How To Order
BLANK = NOT REQUIRED (IE: DUMMY)
1 - WIDE HEAD, SMOOTH SURFACEG1 - WIDE HEAD, GROOVED SURFACE*
SEE P.4
BLANK = N/A
7 - 7 FT8 - 8 FT*9 - 9 FT*X - 10 FT*
BLANK = NOT REQUIRED OR DEFAULT (PULLMAN LATCH)
L - LESS BOTTOM ROD*R - ROUND BOTTOM LATCH*
BLANK = NOT REQUIRED
LHRC - LEFT HAND REV., CYLINDER*RHRC - RIGHT HAND REV., CYLINDER*LHRT - LEFT HAND REV., THUMB TURN*RHRT - RIGHT HAND REV., THUMB TURN*
REQUIRED FOR DOUBLE CYLINDER FUNCTIONS
EXIT DEVICE
DX 1 E TE R A 09 LHR SC KD 6 – FL – 630SERIES STYLE ELECTRIC TRIM DEVICE DESIGN FUNCTION HANDING KEYWAY KEYING PINS FEATURE FINISH
DEVICE TRIM
1 - WIDE HEAD DEVICE
BLANK = NOT REQUIRED
E - ELECTRIC TRIM (TE ONLY)*
SEE P.32
TT - THUMB PIECE TRIM TE - ESCUTCHEON TRIM TP - PULL HANDLE TRIMTH - PULL LATCH TRIM (HANDED)*
SEE P.13–18
BLANK = DEFAULT STYLE
K - THUMB PIECE GRIP K*
Q - ESCUTCHEON LEVER Q*A - ESCUTCHEON LEVER A*K - ESCUTCHEON LEVER K*
B - ESCUTCHEON KNOB B*P - ESCUTCHEON KNOB P*T - ESCUTCHEON KNOB T*
SEE P.13–18
01 - TT / BLANK PLATE*02 - TT / DUMMY (PULL)*03 - TT / NIGHT LATCH05 - TT / CLASSROOM15 - TT / PASSAGE*
02 - TE / DUMMY (LEVER)*08 - TE / CLASSROOM08D - TE / CLASSROOM, INSIDE KEY*
(DBL.CYLINDER)09 - TE / NIGHT LATCH14 - TE / PASSAGE
02 - TP / DUMMY (PULL)*09 - TP / NIGHT LATCH08 - TP / CLASSROOM14 - TP / PASSAGE
08 - TH / CLASSROOM*
SEE P.13–18
630 - SATIN STAINLESS STEEL (32D)626 - SATIN CHROME (26D)†625 - POLISHED CHROME (26)*613 - OIL RUBBED BRONZE (10B)*612 - SATIN BRONZE (10)*611 - POLISHED BRONZE (9)*606 - SATIN BRASS (4)*605 - POLISHED BRASS (3)*
(†) TE TRIM ONLY
BLANK = NOT REQUIRED
SC - SCHLAGE CIA - SFIC A*IAZB - SFIC A, 0-BITTED*IALC - SFIC A, LESS CORE*DUM - DUMMY
SEE P.22
BLANK = N/A
FU - FAIL-UNLOCKED*FL - FAIL-LOCKED*
SEE P.28
R - RIM, VERTICAL OR 3-POINTM - MORTISE EXIT DEVICE
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
T02.
010
DX
1-FG
-8x1
1-32
P-EN
R20
20-0
2-27
BLANK = NOT REQ.
5 - 5 PINS*6 - 6 PINS7 - 7 PINS*
BLANK = NOT REQUIRED
KD - KEYED DIFFERENTKA - KEYED ALIKE*KA2 - KEYED ALIKE, PAIR*
BLANK = (RHR) RIGHT HAND REV. BY DEFAULT
LHR - LEFT HAND REV.
A - DXA106B - DXA108C - DXA136*E - DXA216F - DXA224*G - DXA225*
H - DXA226*J - DXA227/227FK - DXA306L - DXA336*M - DXA337*N - DXA338*
BLANK = DEVICE DEFAULT (SEE P.7–11)
SEE P.19–20
WarrantyDOREX warrants to the original purchaser that all products provided by it shall be free of defects in material and workmanship regarding Mechanical Exit Devices & Trims (5 years), Electrified Products (1 year) and finishes (1 year). The present warranty does not cover scratches, abrasions, deterioration due to the use of paints, solvents and other chemicals, normal wear and tear, abuse or any damage caused by improper installation or misuse of the product. Furthermore, the cost incurred in removing a defective product and installing a replacement product is not included in the warranty. Upon return of a defective product, DOREX may repair or replace the product.
Note: The warranty becomes effective from the date of shipment.
CAUTION: Any retrofit or other field modification to a fire-rated opening can potentially impact the fire rating of the opening, DOREX makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority having jurisdiction) to ensure compliance with all applicable codes and ratings.
It is important that only DX1 strikes and latches be used with DX1 exit devices. The use of third party or previously installed strikes is not recommended and may hamper performance and/or invalidate hardware certifications. As above, please consult with a code specialist or local code official (Authority having jurisdiction) to ensure compliance with all applicable codes and ratings.
9500PR 3 – 28MODEL1 SIZE1 FINISH
(1) SEE SELECTION GUIDE
9500PR/FR SERIESRIM EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3, Grade 1• cULus listed, Panic Exit • cULus listed, up to 3hr Fire Exit• 5 Year limited warranty
Rail Assembly • Steel rail assembly• Stainless steel assembly (32D finish)• Field sizable
Handing • Non-handed
Door Width • 30–38" (762–965 mm) • 36–48" (914–1219 mm) – option
Door Height • Panic Exit: 120" (3048 mm) maximum• Fire Exit: 96" (2438 mm) maximum
Door Thickness • 1 33⁄44" (45.5 mm)• 211⁄44" (57 mm) – available*
(*) Requires #9500KB363, see Parts & Accessories
Stile Width • 411⁄22" (114 mm) minimum
Measured from door edge
Projection • 2 11⁄22" (64 mm) from door surface
Latchbolt • Stainless steel, 33⁄44" (19 mm) throw
Strike • 9500PR: Steel, standard type #9500AS239• 9500FR: Steel, standard type #9500AS245
Other strikes available
Dogging • For Panic Exit models only• Hex key dogging • Cylinder dogging1 – available
(1) See 9500 Trims & Accessories
Mounting Hardware
• Machine and wood screws• Sex nut & thru-bolts1 – available• Glass bead shim kit – available
(1) Included with 9500FR. Required for non-reinforced hollow metal doors.
Electrical Options
• Electronic latch retraction – option• Alarm kit – available*• Request to exit – available*
(*) Sold separately, see 9500 Trims & Accessories
Trims • Lever, knob, pull, plate, escutcheon and handleset trims available
Sold separately, see 9500 Trims & Accessories
Finish 19–Matte black, painted; 28–Aluminum, painted; 32D–Satin Stainless Steel
Other finishes available by special order
02.020ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.
9500CPR Main chassis cover for 9500PR.
9500CFR Main chassis cover for 9500FR.
9500KB357Sex nut thru-bolt kit (6) for 133⁄44" (45.5 mm) thick doors. Included with 9500FR.
9500KB363Sex nut thru-bolt kit (6) for 211⁄44" (57 mm) thick doors.
9500KG401Glass bead shim kit for main chassis and end bracket.
9500AS200Optional roller-type strike for 9500PR. Includes shim and mounting hardware.
9500AS239Standard strike for 9500PR. Includes shim and mounting hardware.
9500AS245Standard strike for 9500FR. Includes shim and mounting hardware.
9500AS251Overlapping strike for double doors with paired panic exit devices, includes mounting hardware. Requires door coordinator (sold separately).
MODEL SIZE DOOR WIDTH1 DOGGING FINISH / CASE
9500PRPanic Exit Hardware Rim device
330–38
(762–965)• 19, 28, 32D 4
436–48
(914–1219)• 28, 32D 4
9500FRFire Exit Hardware2
Rim device
330–38
(762–965)— 19, 28, 32D 4
436–48
(914–1219)— 28, 32D 4
(1) RECOMMENDED DOOR WIDTH, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) FIRE EXIT HARDWARE MUST BE INSTALLED ON FIRE EXIT LABELLED DOORS.
SELECTION GUIDE
MODEL A B C D E1 F
9500PR3 / FR32 11⁄22(64)
7 1111⁄1616
(196)2 1111⁄1616
(68)
211313⁄1616
(554)32 11⁄22(825) 2 11⁄88
(54)9500PR4 / FR4
27 11⁄22(699)
44 11⁄22(1130)
IN (MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS FOR DETAILS
A
B
C
D
F
E
PARTS & COMPONENTS See 9500 Trims & Accessories for additional items.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.02.020 DOREX 9500
9500PV 37 LHR – 28MODEL1 SIZE1 HAND2 FINISH
(1) SEE SELECTION GUIDE (2) LHR–LEFT HAND REVERSED, RHR – RIGHT HAND REVERSED
9500PV/FV/FL SERIESSURFACE VERTICAL ROD EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3, Grade 1• cULus listed, Panic Exit • cULus listed, up to 3hr Fire Exit• 5 Year limited warranty
Rail Assembly • Steel rail assembly• Stainless steel assembly (32D finish)• Field sizable• Panic model convertible to Less Bottom Rod
Handing • Handed, field reversible
Door Size • 30–38 x 84" (762–965 x 2134 mm) • 36–48 x 96" (914–1219 x 2438 mm) – optionSee Selection Guide for details.
Door Thickness • 1 33⁄44" (45.5 mm)• 211⁄44" (57 mm) – option*(*) Requires #9500KB363, see Parts & Accessories
Stile Width • 411⁄22" (114 mm) minimumMeasured from door edge
Projection • 2 11⁄22" (64 mm) from door surface
Vertical Rods • for 84" (2134 mm) door• for 96" (2438 mm) door – option• for 126" (3200 mm) panic door – available
Latches • Top: stainless steel, deadlocking• Bottom: stainless steel
Strikes • 9500PV Top: steel, standard type #9500AS227 9500PV Bottom: steel, standard type #9500AS221
• 9500FV/FL Top: steel, standard type #9500AS245 9500FV Bottom: steel, standard type #9500AS233
Other strikes available
Dogging • For Panic Exit models only• Hex key dogging • Cylinder dogging1 – available (1) See 9500 Trims & Accessories
MountingHardware
• Machine and wood screws• Sex nut & thru-bolts1 – available• Glass bead shim kit – available(1) Required for non-reinforced hollow metal doors.
Included with Fire Exit models
ElectricalOptions
• Electronic latch retraction – option• Alarm kit – available*• Request to exit – available*(*) Sold separately, see 9500 Trims & Accessories
Fire Latch • Auxiliary Fire Latch available, #9500AVFL• Included with 9500FL (Less Bottom Rod)
Trims • Lever, knob, pull, plate, escutcheon and handleset trims available
Sold separately, see 9500 Trims & Accessories
Finish 19–Matte black, painted; 28–Aluminum, painted; 32D–Satin Stainless SteelOther finishes available by special order
02.022ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.
MODEL SIZE DOOR SIZE1 DOGGING FINISH / CASE
9500PVPanic Exit Hardware Surface Vertical Rod
37 30–38 x 84 (965–914 x 2134) • 19, 28, 32D 4
48 36–48 x 96 (914–1219 x 2438) • 28, 32D 4
9500FVFire Exit Hardware2 Surface Vertical Rod
37 30–38 x 84 (965–914 x 2134) — 19, 28, 32D 4
48 36–48 x 96 (914–1219 x 2438) — 28, 32D 4
9500FLFire Exit Hardware2
Less Bottom Rod
37 30–38 x 84 (965–914 x 2134) — 19, 28, 32D 4
48 36–48 x 96 (914–1219 x 2438) — 28, 32D 4(1) RECOMMENDED DOOR SIZE, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) FIRE EXIT HARDWARE MUST BE INSTALLED ON FIRE EXIT LABELLED DOORS.
SELECTION GUIDE
PARTS & COMPONENTS See 9500 Trims & Accessories for additional items.
MODEL A B C D E2 F H K M P
9500PV 37 2 11⁄22(64)
7 1111⁄1616
(196)2 1111⁄1616
(68)211313⁄1616
(554)32 11⁄22 (825)
2 11⁄88(54)
2(51)
ø 11⁄22(12.7)
2 11⁄88 (54) 31515⁄1616
1009500FV / FL1 37 2 55⁄88 (67)
9500PV 48 2 11⁄22(64)
7 1111⁄1616
(196)2 1111⁄1616
(68)27 11⁄22(699)
44 11⁄22(1130)
2 11⁄88(54)
2(51)
ø 11⁄22(12.7)
2 11⁄88 (54) 31515⁄1616
1009500FV / FL1 48 2 55⁄88 (67)IN(MM) (1) 9500FL MODEL DOES NOT INCLUDE BOTTOM ROD AND BOTTOM LATCH (2) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
A
B
C
D
F
E
K
P
9500AS221 Bottom strike for 9500PV exit device.
9500AS227 Top strike for 9500PV exit device.
9500AS233 Bottom strike for 9500FV. Includes mounting hardware. Included with 9500FV.
9500AS245 Top strike for 9500FV / FL. Includes shim and mounting hardware.
9500AVFL Auxiliary fire latch. Includes mounting hard-ware. Included with 9500FL.
9500KB369Sex nut thru-bolt kit (14) for 133⁄44" (45.5 mm) thick doors. Included with 9500FV / FL.
9500KB375Sex nut thru-bolt kit (14) for 211⁄44" (57 mm) thick doors.
9500CPV Main chassis cover for 9500PV.
9500CFV Main chassis cover for 9500FV / FL.
9500AVFB Bottom latch case for 9500FV.
9500AVFT Top latch case for 9500FV / FL
9500AVPB Bottom latch case for 9500PV.
9500AVPT Top latch case for 9500PV.
9500AT96 Top rod for 96" (2438 mm) tall door.
9500AT126 Top rod for non-fire 126" (3200 mm) tall door.
9500ABR Replacement bottom rod.
9500AG Replacement vertical rod guide.
9500KG406Glass bead shim kit for 9500PV exit device.
9500KG412Glass bead shim kit for 9500FV / FL exit device.
H M
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.02.022 DOREX 9500
Model 9500TT03 9500TT04 9500TT05
Function Passage (#3) Storeroom (#4) K Entrance (#5) K
Finish 28, 32D 28, 32D 28, 32D
Cylinder1 — Rim 2 Mortise 2
Plate (H x W) 14 11⁄22 x 2 55⁄88 (368 x 67) 14 11⁄22 x 2 55⁄88 (368 x 67) 14 11⁄22 x 2 55⁄88 (368 x 67)
Pull (B) 6 11⁄88 (156) 6 11⁄88 (156) 6 11⁄88 (156)
Projection (C) 2 11⁄88 (54) 2 11⁄88 (54) 2 11⁄88 (54)
Door Thickness 133⁄44 (44.5)* 133⁄44 (44.5)* 133⁄44 (44.5)*
Warranty 1 Year limited 1 Year limited 1 Year limited
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, SCHLAGE “C”, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE (2) SFIC MODEL AVAILABLE, CORE SOLD SEPARATELY (*) 2 1/4IN (57MM) DOOR KIT AVAILABLE #9500KE225-TT
9500 SERIESEXIT DEVICE TRIMS & ACCESSORIES
9500TT03 9500TT04 9500TT05
H
W C
B
9500TK/TL TRIM STYLES
Trim 9500TK 9500TL
Available Functions1
10 Passage70 Classroom K
80 Storeroom K
10 Passage70 Classroom K 2
80 Storeroom K 2
Finish 26D 26D
Rose (A) 3 33⁄88 (86) 3 33⁄88 (86)
Length (B) ø 2 11⁄44 (57) 4 77⁄1616 (113)
Projection (C) 2 33⁄44 (70) 2 99⁄1616 (65)
Door Thickness 133⁄44 (44.5) 133⁄44 (44.5)
Warranty 1 Year limited 1 Year limited
IN (MM) (1) KEYED FUNCTIONS INCLUDE: SOLID BRASS, 6-PIN CYLINDER, SCHLAGE “C”, 2 KEYS – KEYING SERVICES AVAILABLE (2) SFIC MODEL AVAILABLE, CORE SOLD SEPARATELY
BA
C B
A
C
9500TK70 9500TL70
DOREX 9500 02.024ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-06.
9500TT HANDLESET TRIM
Model 9500TE10 9500TE70 9500TE80
Function Passage Classroom K Storeroom K
Finish 19, 26D, 28 19, 26D, 28 19, 26D, 28
Lever Straight return Straight return Straight return
Cylinder1 — Mortise2 Mortise2
Escutcheon (H x W) 8 33⁄1616 x 211⁄22 (224 x 64) 8 33⁄1616 x 211⁄22 (224 x 64) 8 33⁄1616 x 211⁄22 (224 x 64)
Lever (B) 455⁄88 (118) 455⁄88 (118) 455⁄88 (118)
Projection (C) 233⁄88 (60) 233⁄88 (60) 233⁄88 (60)
Door Thickness 133⁄44 (44.5)* 133⁄44 (44.5)* 133⁄44 (44.5)*
Warranty 1 Year limited 1 Year limited 1 Year limited
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, SCHLAGE “C”, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE (2) SFIC MODEL AVAILABLE, CORE SOLD SEPARATELY (*) 2 1/4IN (57 MM) DOOR KIT AVAILABLE #9500KE225-TE
H
WC
B
9500TE10 9500TE70 9500TE80
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-06.02.024 DOREX 9500
9500 SERIESEXIT DEVICE TRIMS & ACCESSORIES
9500TE ESCUTCHEON TRIM
9500TEH10 9500TEH70 9500TEH80
Model 9500TEH10 9500TEH70 9500TEH80
Function Passage Classroom K Storeroom K
Finish 32D 32D 32D
Lever Straight return Straight return2 Straight return2
Cylinder1 — Mortise Mortise
Escutcheon (H x W) 10 11⁄22 x 2 55⁄88 (268 x 67) 10 11⁄22 x 2 55⁄88 (268 x 67) 10 11⁄22 x 2 55⁄88 (268 x 67)
Lever (B) 455⁄88 (118) 455⁄88 (118) 455⁄88 (118)
Projection (C) 21313⁄1616 (72 ) 21313⁄1616 (72 ) 21313⁄1616 (72 )
Door Thickness 133⁄44 – 211⁄44 (44.5 – 57) 133⁄44 – 211⁄44 (44.5 – 57) 133⁄44 – 211⁄44 (44.5 – 57)
Warranty 5 Year limited 5 Year limited 5 Year limited
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, SCHLAGE “C”, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE (2) LEVER WITH CLUTCH
H
L
C
B
9500TEH ESCUTCHEON TRIM – HEAVY DUTY
9500KA Push pad alarm kit for 9500 exit devices. #9500KA36 for 36" (914 mm) models. #9500KA48 for 48" (1219 mm) models.
9500KDCylinder dogging kit for 9500 Panic Exit devices only. #9500KD36 for size 36" (914 mm) models. #9500KD48 for size 48" (1219 mm) models.
9500KE225-TE9500TE Extension kit for 211⁄44" (57 mm) door
9500KE225-TT9500TT Extension kit for 211⁄44" (57 mm) door
OTHER ACCESSORIES
9500KSRXPush pad request to exit switch kit. Requires rail modification–please contact.
DOREX 9500 02.024ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-06.
9500 SERIESEXIT DEVICE TRIMS & ACCESSORIES
PULLS & PLATES
Trim 9500TPEP 9500TPDT 9500TPNL
Finish 28-Aluminum, painted 28-Aluminum, painted 28-Aluminum, painted
Function Blank plate (#1) Dummy pull (#2) Night latch (#4) K
Cylinder — — Rim1
Projection (B) — 111⁄44 (32) 111⁄44 (32)
Plate (H x W) 51111⁄1616 x 3 (144 x 76) 71313⁄1616 x 3 (198 x 76) 71313⁄1616 x 3 (198 x 76)
Door Thickness 133⁄44 (44.5) 133⁄44 (44.5) 133⁄44 (44.5)
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, SCHLAGE “C”, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE; SFIC MODEL AVAILABLE, CORE SOLD SEPARATELY
BW
H
9500M 70 R3 LHR – 32DMODEL FUNCTION SIZE1 HAND2 FINISH
(1) SEE SELECTION GUIDE (2) LHR–LEFT HAND REVERSED, RHR–RIGHT HAND REVERSED
9500M SERIESMORTISE FIRE EXIT DEVICE
02.025ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
Certifications • Conforms to ANSI/BHMA A156.3, Grade 1• cULus listed, up to 3hr Fire Exit• 5 Year limited warranty
Rail Assembly • Stainless steel rail assembly• Field sizable
Handing • Handed, field reversible
Door Width • 30–38" (762–965 mm) • 36–48" (914–1219 mm) – option
Door Thickness • 1 33⁄44" (45 mm)
Stile Width • 5 11⁄22" (140 mm) minimumMeasured from door edge
Projection • 211⁄88" (54 mm) from door surface
Lock Case • Conforms to ANSI/BHMA A156.13 and A156.3 Grade 1
• Fits ANSI/BHMA A115.1 door preparation• Adjustable faceplate for bevelled doors up to
11⁄88" over 2" (3 mm over 51 mm)
Latchbolt • 2 piece, anti-friction stainless steel latchbolt with deadlatch
• 33⁄44"(19 mm) throw
Strike • T-type strike
Dogging —
Hardware • Machine and wood screws
ElectricalOptions
—
Functions 10 Passage70 Classroom80 StoreroomEscutcheon lever trim & mortise cylinder required, not included – sold separately, see 9500TEM
Trims • Escutcheon trim – requiredSold separately, see 9500TEM
Finish 32D–Satin Stainless SteelOther finishes available by special order
SELECTION GUIDE
9500TEM ESCUTCHEON TRIM
MODEL A B C D E1 F G H K M
9500M R32 11⁄88 (54)
8 55⁄88(219)
2 55⁄88(67)
211313⁄1616 (554)
32 11⁄22(825) 211 ⁄88
(54)8 33⁄44
(222)2
(50.8)2 33⁄44(70)
11⁄22(12.7)
9500M R427 11⁄22(698)
44 11⁄22(1130)
IN(MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
A
B
C
D
F
E
K
M
G
H
9500TEMREQUIRED
Trim 9500TEM10 9500TEM70 9500TEM80
Function Passage Classroom K Storeroom K
Finish 32D 32D 32D
Lever Straight return Straight return Straight return
Cylinder1 — Mortise Mortise
Escutcheon (H x W) 833⁄44 x 2 (222 x 50.8) 833⁄44 x 2 (222 x 50.8) 833⁄44 x 2 (222 x 50.8)
Door Thickness 1 33⁄44 (44.5) 1 33⁄44 (44.5) 1 33⁄44 (44.5)
Warranty 1 Year limited 1 Year limited 1 Year limited
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, 1-1⁄4IN (32MM), SCHLAGE “C”, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE
MODEL FUNCTION SIZE DOOR WIDTH1 DOGGING FINISH / CASE
9500MFire Exit Hardware2 Mortise Rim
10 Passage70 Classroom K
80 Storeroom K
R3 30–38
(762–965)— 32D 4
R4*36–48
(914–1219)— 32D 4
(1) RECOMMENDED DOOR WIDTH, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) FIRE EXIT HARDWARE MUST BE INSTALLED ON FIRE LABELLED DOORS. (*) SPECIAL ORDER–PLEASE CONTACT.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.02.025 DOREX 9500M
PARTS & COMPONENTS Please contact for details.
02.026
9500CV 37 LHR – 32DMODEL SIZE1 HAND2 FINISH
(1) SEE SELECTION GUIDE (2) LHR–LEFT HAND REVERSED, RHR – RIGHT HAND REVERSED
Certifications • Conforms to ANSI/BHMA A156.3, Grade 1• cULus listed, up to 3hr Fire Exit• 5 Year limited warranty
Rail Assembly • Stainless steel rail assembly• Field sizable
Handing • Handed, field reversible
Door Size • 30–38 x 84" (762–965 x 2134 mm) • 36–48 x 96" (914–1219 x 2438 mm) – option
Door Thickness • 1 33⁄44" (45 mm)
Stile Width • 4 11⁄22" (114 mm) minimumMeasured from door edge
Projection • 211⁄88" (54 mm) from door surface
Vertical Rods • For 7' (2134 mm) doors
Latchbolts • Top: stainless steel• Bottom: stainless steel
Strikes • Top: steel• Bottom: steel
Dogging —
Hardware • Machine and wood screws• Sex nut & thru-bolts
ElectricalOptions
—
Trims • Escutcheon trim – available Sold separately, see 9500TEC
Finish 32D–Satin Stainless SteelOther finishes available by special order
9500CV SERIESCONCEALED VERTICAL ROD FIRE EXIT DEVICE
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-08.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-08.02.026 DOREX 9500CV
MODEL SIZE DOOR SIZE1 DOGGING FINISH / CASE
9500CVFire Exit Hardware2 Concealed Vertical Rod
37 30–38 x 84
(762–965 x 2134)— 32D 4
48*36–48 x 96
(914–1219 x 2438) — 32D 4
(1) RECOMMENDED DOOR SIZE, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) FIRE EXIT HARDWARE MUST BE INSTALLED ON FIRE EXIT LABELLED DOORS. (*) SPECIAL ORDER–PLEASE CONTACT
SELECTION GUIDE
A
B
C
D
F
E
MODEL A B C D E1 F G H K M
9500CV 372 11⁄88 (54)
8 55⁄88(219)
2 55⁄88(67)
211313⁄1616 (554)
32 11⁄22(825) 211⁄88
(54)811⁄22
(216)255⁄1616
(59)111⁄22(38)
77⁄88(22)
9500CV 4827 11⁄22(698)
44 11⁄22(1130)
IN (MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
G
H
K
M
9500TEC ESCUTCHEON TRIM
Trim 9500TEC70 9500TEC80
Function Classroom K Storeroom K
Finish 26D 26D
Lever Standard return Standard return
Cylinder1 Mortise Mortise
Door Thickness 133⁄44 (44.5) 1 33⁄44 (44.5)
Warranty 1 Year limited 1 Year limited
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, 1-1⁄4IN (32MM), SCHLAGE “C”, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE
9500TECOPTION
PARTS & COMPONENTS Please contact for details.
8500 C32D – 48MODEL1 FINISH OPTION
(1) SEE SELECTION GUIDE (2) OPTION: 48 –FOR DOORS 36-48X96IN (914-1219X2438MM)
8500/F SERIESRIM EXIT DEVICE
Certifications • Conforms to ANSI/BHMA A156.3, Grade 2• cULus listed, Panic Exit • cULus listed, up to 90 min. Fire Exit• 1 Year limited warranty
Rail Assembly • Steel rail assembly• Stainless steel assembly (C32D finish)• Field sizable
Handing • Non-handed
Door Width • 28–38" (711–965 mm) • 36–48" (914–1219 mm)* – option
(*) Panic Exit models only
Door Thickness • 1 33⁄44" (45.5 mm)
Stile Width • 4" (106.1 mm) minimum
Measured from door edge
Projection • 2 99⁄1616" (65 mm) from door surface
Latchbolt • Stainless steel, 33⁄44" (19 mm) throw• Deadlatch
Strike • Cast iron, standard type #8000S
Other strikes available
Dogging • For Panic Exit models only• Hex key dogging
Hardware • Machine and wood screws• Sex nuts & thru-bolts1 – available
(1) Required for non-reinforced hollow metal doors, included with Fire Exit models
ElectricalOptions
—
Trims • Lever, knob, pull, and handleset trims available
Sold separately, see 8500 Trims & Accessories
Finish C28–Aluminum, painted; C3–Polished brass; C32D–Satin stainless steel
Other finishes available by special order
02.030ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.
8000SRegular 1212⁄3232" (16.5 mm) cast iron strike for panic rim device. Included with 8500.
8000S-LLow-profile 1515⁄3232" (12 mm) cast iron strike for panic rim device. Includes 55⁄6464" (2 mm) shims.
8000DDSOverlapping cast iron strike for double doors and paired panic exit devices only.
MODEL DOOR WIDTH1 DOGGING FINISH / CASE
8500Panic Exit Hardware,
Rim device
28–38 (711–965)
• C28, C3, C32D 4
8500 -4836–48
(914–1219)• C28, C32D 4
8500FFire Exit Hardware2
Rim device28–38
(711–965 x 2134)— C28, C3, C32D 4
(1) RECOMMENDED DOOR WIDTH, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) FIRE EXIT HARDWARE MUST BE INSTALLED ON FIRE EXIT LABELLED DOORS.
SELECTION GUIDE
MODEL A B C D E1 F
8500 / 8500F 299⁄1616
(65)7 1111⁄1616 (195)
2 (50.8)
20 11⁄44 (514) 33 11⁄44 (845) 1 1515⁄1616 (50)8500 -48 30 (762) 45 55⁄1616 (1150)
IN (MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
A
B
C
D
F
E
PARTS & COMPONENTS See 8500 Trims & Accessories for additional items.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.02.030 DOREX 8500
8500V/VF SERIESSURFACE VERTICAL ROD EXIT DEVICE
Certifications • Conforms to ANSI/BHMA A156.3, Grade 2• cULus listed, Panic Exit • cULus listed, up to 90 min. Fire Exit• 1 Year limited warranty
Rail Assembly • Steel rail assembly• Stainless steel assembly (C32D finish)• Field sizable
Handing • Non-handed
Door Size • 30–38 x 84" (762–965 x 2134 mm) • 36–48 x 96" (914–1219 x 2438 mm)* – option
(*) Panic Exit model only
Door Thickness • 1 33⁄44" (45.5 mm)
Stile Width • 4" (106.1 mm) minimum
Measured from door edge
Projection • 2 99⁄1616" (65 mm) from door surface
Vertical Rods • For 7' (2134 mm) doors • For 9' (2438 mm) door – available*
(*) Panic Exit model only
Latchbolts • Top: stainless steel, deadlatch • Bottom: stainless steel
Strikes • Top: steel, standard type • Bottom: steel, standard type
Dogging • For Panic Exit models only• Hex key dogging
Hardware • Machine and wood screws• Sex nut & thru-bolts1 – available
(1) Required for non-reinforced hollow metal doors, included with Fire Exit models
ElectricalOptions
—
Trims • Lever, knob, pull, and handleset trims available
Sold separately, see 8500 Trims & Accessories
Finish C28–Aluminum; C3–Polished brass; C32D–Satin stainless steel
Other finishes available by special order
8500V C32D – 48MODEL1 FINISH OPTION
(1) SEE SELECTION GUIDE (2) OPTION: 48 –FOR DOORS 36-48X96IN (914-1219X2438MM)
02.032ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.
SELECTION GUIDE
8000EXT96C28Extension rod for 96" (2438 mm) Doors. For #8500V Panic Exit model only.
MODEL DOOR SIZE1 DOGGING FINISH / CASE
8500VPanic Exit Hardware, surface vertical rod
30–38 x 84 (762–965 x 2134)
• C28, C32D 4
8500V -4836–48 x 96
(914–1219 x 2438)• C28, C32D 4
8500VFFire Exit Hardware2, surface vertical rod
30–38 x 84 (762–965 x 2134)
— C28, C3, C32D 4
(1) RECOMMENDED DOOR SIZE, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) FIRE EXIT HARDWARE MUST BE INSTALLED ON FIRE EXIT LABELLED DOORS.
MODEL A B C D E1 F G H K M
8500V / 8500VF299⁄1616
(65)7 1111⁄1616 (195)
2 (50.8)
20 11⁄44(514)
33 11⁄44(845) 1 1515⁄1616
(50)2
(50.8)
33⁄88(10)
1 33⁄88 (35)
5 77⁄88(149)
8500V -4830
(762)45 55⁄1616
(1150)IN (MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
PARTS & COMPONENTS See 8500 Trims & Accessories for additional items.
A
B
C
D
F
E
G
M
K
H
ø
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-07.02.032 DOREX 8500
MODEL 8503 8504 8505
FinishC15–Satin nickel, C28–Aluminum, C3–Polished brass
CC15–Satin nickel, C28–Aluminum, C3–Polished brass
C15–Satin nickel, C28–Aluminum, C3–Polished brass
Function Passage (#3) Storeroom (#4) K Entrance (#5) K
Cylinder1 — Threaded rim (Weiser) Mortise (Schlage C)
Projection (B) 1 1313⁄16 16 (46) 1 1313⁄1616 (46) 1 1313⁄16 16 (46)
Plate (H x W) 12 11⁄44 x 3 (311 x 76) 12 11⁄44 x 3 (311 x 76) 12 11⁄44 x 3 (311 x 76)
Pull (C) 5 55⁄1616 (151) 5 55⁄1616 (151) 5 55⁄1616 (151)
Door Thickness 133⁄44 (44.5) 133⁄44 (44.5) 133⁄44 (44.5)
Warranty 1 Year limited 1 Year limited 1 Year limited
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE
8500TT HANDLESET TRIMS
MODEL 8500FC 8500FH 8500FS 8500B
AvailableFunctions1
10 Passage70 Classroom K
80 Storeroom K
10 Passage70 Classroom K
80 Storeroom K
10 Passage70 Classroom K
80 Storeroom K
10 Passage70 Classroom K
80 Storeroom K
ALL KEYED LEVERS HAVE CLUTCH RELEASE.
FinishC26D–Satin Chrome, C3–Polished brass
C26D–Satin Chrome C26D–Satin Chrome C32D–Satin stainless steel
A ø 3 11⁄1616 (78) ø 3 11⁄1616 (78) ø 3 11⁄1616 (78) ø 3 11⁄1616 (78)
B 4 55⁄88 (117) 4 55⁄88 (117) 4 55⁄88 (117) ø 2 33⁄1616 (55)
C 2 (50.8) 2 (50.8) 55⁄88 (16) 21515⁄1616 (75)
D 1111⁄1616 (17) 1111⁄1616 (17) 2 11⁄88 (54) —
Door Thickness 133⁄44 (44.5) 133⁄44 (44.5) 133⁄44 (44.5) 133⁄44 (44.5)
Warranty 1 Year limited 1 Year limited 1 Year limited 1 Year limited
IN (MM) (1) KEYED FUNCTIONS INCLUDE SOLID BRASS, 6-PIN CYLINDER, SCHLAGE C CYLINDER, 2 KEYS - KEYING SERVICES AVAILABLE.
8580 FC 8580 FH 8580 FS 8510 B
8503 8504 8505B
C
H
W
8500 LEVER & KNOB TRIMS
A
C
B
A
B
CD
8500 SERIESEXIT DEVICE TRIMS & ACCESSORIES
DOREX 8500 02.034ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-01.
8000ASAB ASA strike filler plate.
8000BS ASA strike and latch faceplate filler plates.
8000EOPCross bore cover plate, painted steel
PULLS & PLATES
MODEL 8000NLS 8000DT 8000NL
Finish Stainless Steel Aluminum, painted Aluminum, painted
Function Night latch (#4) Dummy pull (#2) Night latch (#4)
Cylinder1 — — —
Projection (A) 1313⁄1616 (21) 1 33⁄1616 (30) 1 33⁄1616 (30)
Plate (H x W) 3 x 133⁄44 (36 x 44.5) 6 33⁄88 x 311⁄22 (162 x 89) 6 33⁄88 x 311⁄22 (162 x 89)
IN(MM) (1) RIM CYLINDER NOT INCLUDED, SOLD SEPARATELY
OTHER ACCESSORIES
H
W A
9500KTRCRim cylinder mounting kit.
8500 SERIES EXIT DEVICE TRIMS & ACCESSORIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-01.02.034 DOREX 8500
8000 ALMODEL1 FINISH
(1) SEE SELECTION GUIDE
8000/F SERIESRIM EXIT DEVICE
Certifications • Conforms to ANSI/BHMA A156.3, Grade 2• cULus listed, Panic Exit • cULus listed, up to 90 min. Fire Exit• 1 Year limited warranty
Rail Assembly • Steel• Field sizable
Handing • Non-handed
Door Width • 28–38" (711–965 mm)
Door Thickness • 1 33⁄44" (45.5 mm)
Stile Width • 411⁄22" (114 mm) minimum
Measured from door edge
Projection • 2 11⁄22" (64 mm) from door surface
Latchbolt • Stainless steel• Deadlatch
Strike • Cast iron, standard type #8000S
Other strikes available
Dogging • For Panic Exit Hardware only• Hex key dogging
Hardware • Machine and wood screws• Sex nuts & tru-bolts1 – available
(1) Required for non-reinforced hollow metal doors, included with Fire Exit models
ElectricalOptions
—
Trims • Fully compatible with DOREX 8500 lever, knob, pull and handleset trims
Sold separately, see 8500 Trims & Accessories
Finish AL–Aluminum
Other finishes available by special order
02.040ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-04.
MODEL DOOR WIDTH1 DOGGING FINISH / CASE
8000Panic Exit Hardware Rim Device
28–38(711–965)
• AL 6
8000FFire Exit Hardware2
Rim Device28–38
(711–965) — AL 6
(1) RECOMMENDED DOOR WIDTH, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) FIRE EXIT HARDWARE MUST BE INSTALLED ON FIRE EXIT LABELLED DOORS.
SELECTION GUIDE
MODEL A B C D E1 F
8000 / 8000F 211⁄22 (64)
4 77⁄1616 (113)
2 (51)
29 11⁄22(749)
32 77⁄88(835)
1 1515⁄1616
(49)IN (MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
8000SRegular 1212⁄3232" (16.5 mm) cast iron strike for panic rim device. Included with 8000.
8000S-LLow-profile 1515⁄3232" (12 mm) cast iron strike for panic rim device. Includes 55⁄6464" (2 mm) shims.
8000DDSOverlapping cast iron strike for double doors and paired panic exit devices only.
PARTS & COMPONENTS Fully compatible with DOREX 8500 Trims & Accessories
A D
F
E
B
C
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-04.02.040 D8DIVISION8 8000
2 DOREX DX2
K
L
J
The DX2 Series Narrow Head Exit Devices are designed and manufactured for simplicity, strength, durability, aesthetics and installer-friendly innovations.
• Devices and trims are designed for new or retrofit installation into other manufacturers’ exit devices and trims.
• Made to comply with the highest safety and security standards in the industry.
• cULus listed for Panic Exit Hardware or 3-hour Fire Rated Exit Hardware.
• Certified ANSI/BHMA A156.3-2014 Grade 1.
DX
2
A Special plastic inserts and rubber bumpers reduce noise.
B Detachable center case al lows switching between mechanical and electrical options which replaces the need of buying two complete sets.
C Center case with maximum versatility, surface and concealed vertical rods can be adjusted inside the center case with an ingenious rod holder design.
D Cross spindle offers additional strength.
E Replaceable cam breaks at a predetermined load to prevent further damage of the trim mechanism. Handing change is simple and easy.
F Center Case mounting plate made of heavy gauge steel adding extra strength.
G Stainless steel latch and security deadlatch.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
3DOREX DX2
E
F
D
G
C
H
B
I
A
H Center Case fits minimum 2” stile.
I Steel die cast rocker arm designed for heavy use.
J Push bar with integrated end caps and pivot add stability and make the bar move smoothly regardless of where the pressure is applied on push bar.
K Standard flat/hex key dogging or optional cylinder dogging** available for non-fire rated exit devices.
L Flush end cap design.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND MINIMUM ORDER QUANTITIES. ** CYLINDERS SOLD SEPARATELY
4 DOREX DX2
General OverviewDevice MaterialDX2 Series ext devices are furnished standard with a smooth case. Models with a grooved case are available. The two styles are mechanically and dimensionally identical and come with a wide selection of finishes.
Finishes
Color ANSI/BHMA US B / E / G A / D C / F /H
Satin Stainless Steel 630 32D Stainless Steel, Satin Plated Anodized 1
Satin Chrome* 626 26D Brass, Satin & Plated Plated Anodized 1
Polished Chrome* 625 26 Brass, Polished & Plated Plated Buffed Anodized 1
Oil Rubbed Bronze* 613 10B Bronze, Satin; Dark Oxidized Plated Anodized 1
Satin Bronze* 612 10 Bronze, Satin Plated Anodized 1
Polished Bronze* 611 9 Bronze, Polished Plated Buffed Anodized 1
Satin Brass* 606 4 Brass, Satin Plated Anodized 1
Polished Brass* 605 3 Brass, Polished Plated Buffed Anodized 1
(*) Special order finish, will require additional lead time and minimum order quantities. (1) Aluminum materialNOTE: Non-listed finishes are available–please contact your sales representative.
(B) Push Bar Options†:• Embossed “PUSH”• Braille, embossed “CAUTION STAIRWELL”• Red silk screen lettered “EMERGENCY EXIT ONLY - PUSH TO OPEN & SOUND ALARM” (†) Please contact sales representative prior to ordering.
A. Push Bar Integrated End Cap
F. Rail Assembly
E. Center Case Cover
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
Part Material & Finish :
5DOREX DX2
Functions
ANSI/BHMA Number
Operation Trim Option
DX2TP Series Pull Trim
DX2TE Series Escutcheons
01 Exit only, blank escutcheon or plate. DX2TPR01* N
02 Entrance by trim when bar is locked down/dogged. DX2TPR02* DX2TER02*
03 Entrance by trim. Key retracts latch. Key removable only when locked. (Night Latch)
DX2TPR03* DX2TER03*
08 Entrance by knob/lever. Key locks or unlocks knob/lever. N DX2TEM08
09 Entrance by knob/lever only when released by key. Key removable only when locked. (Night Latch)
N DX2TER09
11 Entrance by thumb turn. Key locks or unlocks thumb turn. N DX2TEM11*
12 Entrance by thumb turn only when released by key. Key removable only when locked. (Night Latch)
N DX2TER12*
14 Entrance by trim when latch is released by knob/lever. N DX2TER14*
16 Entrance by trim when latch is released by thumb turn. N DX2TER16*
See pages 13–17 for more details.
B.Push Bar (see below) C.
Cover Plate
D. End Cap
Optional for DX2PV-FV, DX2PW-FW (Not Shown)
G. Latch Cover for Surface Vertical Rods
H. Vertical Rods
Smooth (Standard) Grooved (Option)*
Mechanism Case
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
6 DOREX DX2
Dimensions
Pull Trim Escutcheon
811⁄44"(211 mm)
155⁄1616" (33 mm)
211⁄44"(57 mm)
1811⁄22" (471 mm)2411⁄22" (621 mm)
233⁄88"(61 mm)
35 77⁄88" (910 mm)47 33⁄44" (1214 mm)
Neutral : 3 1313⁄1616" (97 mm)Depressed : 3 11⁄1616" (78 mm)
2 11⁄44"(57 mm)
1411⁄44"(361 mm)
1 33⁄44"(43 mm)
51515⁄1616"(150.3 mm)
2"(50 mm)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
7 33⁄44"(198 mm)
11111⁄1616"(43 mm)
77⁄88"(23 mm)
533⁄88"(138 mm)
99⁄1616"(14 mm)
7DOREX DX2
DX2PR/FR SERIESRIM EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case • Adjustments accessible through center case after
installation• Aluminum rail assembly, field sizable
Handing • Non-handed• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 – 8 ft (2134 – 2438 mm) – standard
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Center Latch • Stainless steel, 33⁄44" (19 mm) throw• Deadlocking
Strike • PANIC: Steel, roller type #DXAS103 –standard• FIRE: Steel, roller type #DXAS108 –standard
See DX2 Accessories, p. 19–22.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – option*
Cylinder • NOT included, sold separately
See DX2 Cylinders, p. 23.
Mounting Hardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard1
• Shims – standard
(1) With fire model. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors
See DX2 Accessories, p. 19–22.
Electrical Options*
• Alarm kit • Delayed egress• Electronic latch retraction • Latchbolt monitoring • Request to exit • Signal switch
(*) Special order. See DX2 Electrical, p. 25–29.
Trims • Compatible trims sold separately, easy to mix and match
See DX2 Trims, p.13–17.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
8 DOREX DX2
DX2PV/FV SERIESSURFACE VERTICAL ROD EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case with top and bottom rod adjusters.
• Adjustments accessible through center case after installation
• Aluminum rail assembly, field sizable
Handing • Non-handed• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 ft (2134 mm) – standard• 8 ft (2468 mm) – option*• 10 ft (3048 mm) – option*
See DX2 Accessories, p. 19–22.
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Top Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Bottom Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Round slide bolt – available*• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Fire Latch • Available for door openings 8 ft (2438 mm) wide x 8 ft (2438 mm) high
• Included with Less Bottom Rod (L) option
See DX2 Accessories, p. 21.
Strikes • PANIC » Top: Steel, roller type #DXAS203 –standard » Bottom: Steel, #DXAS227 –standard
• FIRE » Top: Steel, roller type #DXAS108 –standard » Bottom: Steel, #DXAS227F –standard
See DX2 Accessories, p. 19–22.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – option*
Cylinder • NOT included, sold separately
See DX2 Cylinders, p. 23.
MountingHardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard1
• Shims – standard
(1) With fire model. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors.
See DX2 Accessories, p. 19–22.
Electrical Options*
• Alarm kit • Delayed egress• Electronic latch retraction • Latchbolt monitoring • Request to exit • Signal switch
(*) Special order. See DX2 Electrical, p. 25–29.
Trims • Compatible trims sold separately, easy to mix and match - See DX2 Trims, p. 13–17.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
9DOREX DX2
DX2PC/FC SERIESCONCEALED VERTICAL ROD EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case with top and bottom rod adjusters.
• Adjustments accessible through center case after installation
• Aluminum rail assembly, field sizable
Handing • Non-handed• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 ft (2134 mm) – standard• 8 ft (2468 mm) – option*• 1 0ft (3048 mm) – option*
See DX2 Accessories, p. 19–22.
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Top Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Bottom Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Round slide bolt – available*• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Fire Latch • Available for door openings 8 ft (2438 mm) wide x 8 ft (2438 mm) high
• Included with Less Bottom Rod (L) option
See DX2 Accessories, p. 21.
Strikes • PANIC » Top: Steel, #DXAS216 –standard » Bottom: Steel, #DXAS227 –standard
• FIRE » Top: Steel, #DXAS216 –standard » Bottom: Steel, #DXAS227F –standard
See DX2 Accessories, p. 19–22.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – option*
Cylinder • NOT included, sold separately
See DX2 Cylinders, p. 23.
Mounting Hardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard1
• Shims – standard
(1) With fire model. Required for fire-rated wood or composite doors and non-reinforced hollow metal doors
See DX2 Accessories, p. 22.
Electrical Options*
• Alarm kit • Delayed egress• Electronic latch retraction • Latchbolt monitoring • Request to exit • Signal switch
(*) Special order. See DX2 Electrical, p. 25–29.
Trims • Compatible trims sold separately, easy to mix and match - See DX2 Trims, p. 13–17.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
10 DOREX DX2
DX2PW/FW SERIES3-POINT LATCHING EXIT DEVICE
Certifications • Certified ANSI/BHMA A156.3-2014, Grade 1• cULus listed for Panic Hardware• cULus listed for 3hr Fire Exit Hardware• Complies with NFPA 80 Fire doors
Center Case & Rail Assembly
• Heavy wrought steel center case with top and bottom rod adjusters.
• Adjustments accessible through center case after installation• Aluminum rail assembly, field sizable
Handing • Non-handed• Trims are field reversible
Door Width • 36" (914 mm) – standard • 48" (1219 mm) – option*
Door Height • 7 ft (2134 mm) – standard• 8 ft (2468 mm) – option*• 10 ft (3048 mm) – option*
See DX2 Accessories, p. 19–22.
Door Thickness • 1 33⁄44" (45 mm) – standard• 211⁄44" (57 mm) – available*
Center Latch • Stainless steel, deadlocking, 33⁄44" (19 mm) throw
Top Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Bottom Latch • Stainless steel, Pullman type, 55⁄88"(16 mm) throw• Deadlocking• Round slide bolt – available*• Case : 411⁄22 × 211⁄88 × 111⁄22" (114 × 54 × 38 mm)
Fire Latch • Available for door openings 8 ft (2438 mm) wide x 8 ft (2438 mm) high
• Included with Less Bottom Rod (L) option
See DX2 Accessories, p. 21.
Strikes • PANIC » Top: Steel, roller type #DXAS203 –standard » Middle: Steel, roller type #DXAS103 –standard » Bottom: Steel, #DXAS227 –standard
• FIRE » Top/Middle: Steel, roller type #DXAS108 –standard » Bottom: Steel, #DXAS227F –standard
See DX2 Accessories, p. 19–22.
Dogging • NOT available on FIRE EXIT hardware• Flat/hex key dogging – standard• Cylinder dogging – available
Cylinder • NOT included, sold separately
See DX2 Cylinders, p. 23.
MountingHardware
• Machine and wood screws – standard• Sex nut & thru-bolts – standard1
• Shims – standard
(1) With fire model. Required for fire-rated wood or composite doors and non-reinforced hollow metal door
See DX2 Accessories, p. 19–22.
Electrical Options*
• Alarm kit • Delayed egress• Electronic latch retraction • Latchbolt monitoring • Request to exit • Signal switch
(*) Special order. See DX2 Electrical, p. 25–29.
Trims • Compatible trims sold separately, easy to mix and match - See DX2 Trims, p. 13–17.
Finish 630–Satin Stainless Steel
Other finishes available by special order, see p. 4.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
11DOREX DX2
Exit Device
Door Material
Single Door
Double Door
With mullion
2x Vertical RodSame Direction
2x Vertical RodDouble Egress
DX2 FR RIM
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
DX2 FVSVR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX2 FVLLBR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX2 FC CVR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX2 FCL LBR
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
3 Hours 8' x 8'
DX2 FW 3PT
Metal 3 Hours 4' x 8'
3 Hours 8' x 8'
Metric conversion: 4' (1219mm), 8' (2438mm), 10' (3048mm)
Notes:
1. Fire exit device conforms to UL10C and UBC7-2. 2. Fire exit device is applicable for wood door with 111⁄22-hour or 20-min fire rating. 3. Consult with door manufacturer for specific limitations on fire door assemblies.
Fire Door Maximum Door Opening Applications and Listings
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
Exit Device
Single door Double door
Strike Minimum stile Strike with mullion** Minimum stile
DX2 PRRIM
DXAS103 2" (51 mm) DXAS103 x mullion 3" (76.2 mm)
DXAS106† 277⁄88" (73 mm) DXAS106 x mullion 355⁄88" (92 mm)
DX2 PVSVR
DXAS203 (Top) DXAS227 (Bottom)
2" (5 mm) DXAS203 (Top) DXAS227 (Bottom)
211⁄88"(54 mm)
DXAS106† (Top) DXAS227 (Bottom)
255⁄1616" (58.7 mm) DXAS106† (Top) DXAS227 (Bottom)
255⁄1616" (58.7 mm)
DX2 PCCVR
DXAS216 (Top) DXAS227 (Bottom)
2" (51 mm) DXAS216 (Top) DXAS227 (Bottom)
211⁄44" (57.2 mm)
DX2 PW3PT
DXAS103 (Middle) DXAS203 (Top) DXAS227 (Bottom)
255⁄1616" (58.7 mm) DXAS103 x mullion DXAS203 (Top) DXAS227 (Bottom)
3" (76.2 mm)
DXAS106† (Middle) DXAS203 (Top) DXAS227 (Bottom)
277⁄88" (73 mm) DXAS106† x mullion DXAS203 (Top) DXAS227 (Bottom)
355⁄88" (92 mm)
DX2 FRRIM
DXAS108 3" (76.2 mm) DXAS108 x mullion 4" (101.4 mm)
DX2 FVSVR
DXAS108 (Top) DXAS227F (Bottom)
277⁄88" (73 mm) DXAS108 (Top) DXAS227F (Bottom)
21111⁄1616" (68.2 mm)
DX2 FCCVR
DXAS216 (Top) DXAS227F (Bottom)
355⁄88" (92 mm) DXAS216 (Top) DXAS227F (Bottom)
355⁄88" (92 mm)
DX2 FW3PT
DXAS108 (Middle) DXAS108 (Top) DXAS227F (Bottom)
255⁄1616" (58.7 mm) DXAS108 x mullion DXAS108 (Top) DXAS227F (Bottom)
411⁄44" (108 mm)
†Alternative option. **Please contact representative for mullion details and options.For reference only, stile width may vary due to strikes used, door frame type, and required backsets.
Strike Application / Minimum Stile
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
13DOREX DX2
Trim OptionsDX2
Plate Pull Only With Cylinder
Lever Thumb Turn With Cylinder
DX2TE Series Escutcheon Trims
DX2TP Series Pull Trims
14 DOREX DX2
DX2TP Series Pull Trims
OperationExit only, blank escutcheon Entrance by trim when
actuating bar is locked down/ dogged. (Dummy)
Entrance by trim when latch is released by key. Key removable only when locked. (Night Latch)*Cylinder collar required (not included)
Trim No. DX2TPR 01* DX2TPR 02* DX2TPR 03*
Cylinder Type RIM
Device No. DX2 PR/FR DX2 PR/FR DX2 PR/FR
DX2 PV/FV DX2 PV/FV DX2 PV/FV
DX2 PC/FC DX2 PC/FC DX2 PC/FC
DX2 PW/FW DX2 PW/FW DX2 PW/FW
Specify Handing** YES YES YES
Features
• Trims are furnished with wrought plate and extruded or with cast solid grips.
• Trims are designed to retrofit into other manufacturers’ devices.
• Trims are UL/cUL certified for ANSI/BHMA A156.3-2014 Grade 1 and 3-Hour Fire Exit Hardware.
• Trims are through bolted. • Satin stainless steel (630) finish – other finishes
available.• Specify handing when ordering• For Trim dimensions, see page 6.• To order, see page 30.
Standard K type(Option)*
Grip Options
ANSI/BHMA 01 02 03
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
(**) SPEICIFY LHR/RHR WHEN ORDERING – SEE PAGE 30.
15DOREX DX2
DX2TE Series Escutcheon Trims
ANSI/BHMA 11 12 16
OperationEntrance by thumb-turn. Key locks or unlocks thumb turn. (Storeroom)
Entrance by thumb-turn only when released by key. Key removable only when locked. (Night Latch)
Entrance by trim when latch is released by thumb-turn. (Passage)
Trim No. DX2TER 11* DX2TER 12* DX2TER 16*
Cylinder TypeMortise Rim
Device No.DX2 PR/FR DX2 PR/FR DX2 PR/FR
DX2 PV/FV DX2 PV/FV DX2 PV/FV
DX2 PC/FC DX2 PC/FC DX2 PC/FC
DX2 PW/FW DX2 PW/FW DX2 PW/FW
Specify Handing** NO NO NO
Features
• Escutcheon and lever with sleek and seamless design produced by casting or forging.
• Trims are designed to retrofit into other manufacturers’ devices.
• Handing field reversible.• Trims are UL/cUL certified for ANSI/BHMA A156.3-
2014 Grade 1 and 3-Hour Fire Exit Hardware.• Satin chrome (626) finish – other finishes available.• For Trim dimensions, see page 6.• To order, see page 30.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
(**) SPEICIFY LHR/RHR WHEN ORDERING – SEE PAGE 30.
16 DOREX DX2
DX2TE Series Escutcheon Trims
ANSI/BHMA 02 03 08 09 14
Operation
Entrance by trim when actuating bar is locked down / dogged. (Dummy)
Entrance by trim when latch is released by key. Key removable only when locked. (Night Latch)
Entrance by lever. Key locks or unlocks lever. (Classroom)
Entrance by lever only when latch is released by key. Key removable only when locked. (Night Latch)
Entrance by trim when latch is released by lever. Always active, no cylinder. (Passage)
Trim No. DX2TER 02* DX2TER 03* DX2TER08 DX2TER 09 DX2TER 14*
Cylinder Type Rim Mortise Rim
Device No. DX2 PR/FR DX2 PR/FR DX2 PR/FR DX2 PR/FR DX2 PR/FR
DX2 PV/FV DX2 PV/FV DX2 PV/FV DX2 PV/FV DX2 PV/FV
DX2 PC/FC DX2 PC/FC DX2 PC/FC DX2 PC/FC DX2 PC/FC
DX2 PW/FW DX2 PW/FW DX2 PW/FW DX2 PW/FW DX2 PW/FW
Specify Handing** NO NO NO NO NO
Features
• Escutcheon and lever with sleek and seamless design produced by casting or forging.
• Trims are designed to retrofit into other manufacturers’ devices.• Handing field reversible.• Trims are UL/cUL certified for ANSI/BHMA A156.3-2014
1 and 3-Hour Fire Exit Hardware.• Satin chrome (626) finish – other finishes available.• Other lever styles available. • For Trim dimensions see page 6.• To order, see page 30.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
(**) SPEICIFY LHR/RHR WHEN ORDERING – SEE PAGE 30.
17DOREX DX2
ANSI/BHMA 02 03 08 09 14
Operation
Entrance by trim when actuating bar is locked down / dogged. (Dummy)
Entrance by trim when latch is released by key. Key removable only when locked. (Night Latch)
Entrance by lever. Key locks or unlocks lever. (Classroom)
Entrance by lever only when latch is released by key. Key removable only when locked. (Night Latch)
Entrance by trim when latch is released by lever. Always active, no cylinder. (Passage)
Trim No. DX2TER 02* DX2TER 03* DX2TER08 DX2TER 09 DX2TER 14*
Cylinder Type Rim Mortise Rim
Device No. DX2 PR/FR DX2 PR/FR DX2 PR/FR DX2 PR/FR DX2 PR/FR
DX2 PV/FV DX2 PV/FV DX2 PV/FV DX2 PV/FV DX2 PV/FV
DX2 PC/FC DX2 PC/FC DX2 PC/FC DX2 PC/FC DX2 PC/FC
DX2 PW/FW DX2 PW/FW DX2 PW/FW DX2 PW/FW DX2 PW/FW
Specify Handing** NO NO NO NO NO
Standard Q type(Option)*
Lever Options
A type (Option)*
K type(Option)*
The DX2TEM (functions 08,11 only) trim includes an internal breakable cam which breaks when a predetermined load is applied to the outside thumb-turn or lever handle when locked without damaging the trim or com-promising security. The cam can easily be replaced - #DXACAMED05.
Breakable Cam
BREAKABLE CAM
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
19DOREX DX2
AccessoriesRim Device -Strikes
P/N. DXAS106*Rim StrikeOptional middle strike for DX2PR, DX2PW.Optional top stike for DX2PV, DX2PW.
P
P/N. DXAS136*Rim Strike (Overlapping Strike)For DX2PR, DX2PV and DX2PC in double door applications with door coordinator and no mullion.P
1 ¼" (32 mm) 13⁄16" (20.5 mm)
2 7⁄8
" (73
.4 m
m)
2 1⁄8
" (54
mm
)
P/N. DXAS108Rim StrikeStandard middle strike for DX2FR, DX2FW.Standard top strike for DX2FV, DX2FW.For double door DX2PR/DX2FR, DX2PW/DX2FW with mullion.
P
1 ½" (38 mm) 7⁄8" (22 mm)
3" (7
7 m
m)
2 1⁄8
" (54
mm
)
1 5⁄8
" (40
mm
)
P/N. DXAS103Rim StrikeStandard middle strike for DX2PR, DX2PW.For double door DX2PR, DX2PW with mullion.P
1 7⁄8" (47.9 mm) 9⁄16" (13.8 mm)
2 13⁄
16" (7
0.8
mm
)
1 ¾
" (44
.8 m
m)
2 ¼
" (57
.8 m
m)
1 7⁄8" (47 mm)
3⁄8" (9.5 mm)1 1⁄8" (27 mm)
3 ¼
" (83
mm
)
2 1⁄8
" (54
mm
)
P Panic Application Fire Application
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
20 DOREX DX2
P/N. DXAS227/227FBottom StrikeStandard for DX2PV/FV, DX2PC/FC, DX2PW/FW. P
P/N. DXAS225*Bottom StrikeOptional for DX2PV/FV, DX2PC/FC, DX2PW/FW round slide bolt. (Grade 2)P
P/N. DXAS215*Top StrikeFor flush transom DX2PV/FV, DX2PW/FW.P
Pullman
Top Strike
P/N. DXAS224*Bottom StrikeOptional for DX2PV/FV, DX2PW/FW. (Grade 2)P
P/N. DXAS226*Bottom StrikeOptional for DX2PV/FV, DX2PC/FC, DX2PW/FW round slide bolt. (Grade 2)P
P/N. DXAS216Top StrikeStandard for DX2PC/FC.P
P/N. DXAS203Top StrikeFor DX2PV, DX2PW.P
1 5⁄8" (40 mm)2
½" (
64 m
m)
3⁄8"
(9.5
mm
)
1 ¼" (32 mm)
1 5⁄8
" (40
mm
)5⁄8
" (16
mm
)
5⁄8" (15 mm)
2 ½
" (64
mm
)
1 7⁄8
" (47
mm
) 3⁄
8" (9
.5 m
m)
1 ¼" (32 mm)
5⁄8" (16 mm)
1 5⁄8
" (40
mm
)
1" (25.4 mm)
¾" (
19 m
m)
¾" (19 mm)
2 1⁄8" (54 mm)
2 ¾
" (70
mm
)1
¼" (
32 m
m)
1 ¼" (32.3 mm) 13⁄16" (20.3 mm)
1 3⁄8
" (35
mm
)
5⁄8" (
16 m
m)
AccessoriesVertical Rod (VR) Device - Strikes P Panic Application
Fire Application
Vertical Rod (VR) Device - Bottom Strikes
Round
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
21DOREX DX2
P/N. DXKG6010*For DXAS106 Rim StrikeTwo (2) pieces furnished standard
P/N. DXKG6050*For DX2PC/FC top & bottom latch strikesSixteen (16) pieces furnished standard for Top and Bottom latches. Eight (8) pieces furnished standard for LBR.
P/N. DXKG6030*For DXAS108 Rim StrikeTwo (2) pieces furnished standard
P Panic Application Fire ApplicationShims
Accessories
Devices No. Specification Qty.
Without Trim DX2PR/FR DXKB1024 (No.10-24) DXKB4120 (No.1/4-20)
2 2
DX2PV/FV DXKB1024 (No.10-24) DXKB4120 (No.1/4-20)
2 6
DX2PC/FC DXKB1024 (No.10-24) DXKB4120 (No.1/4-20)
2 2
DX2PW/FW DXKB1024 (No.10-24) DXKB4120 (No.1/4-20)
2 6
With Trim DX2PR/FR DXKB1024 (No.10-24) 2
DX2PV/FV DXKB1024 (No.10-24) DXKB4120 (No.1/4-20)
2 4
DX2PC/FC DXKB1024 (No.10-24) 2
DX2PW/FW DXKB1024 (No.10-24) DXKB4120 (No.1/4-20)
2 4
DXKB1024(No. 10-24)
DXKB4120(No. 1/4-20)
Fastener/Sex Nut Bolts (SNB)
Specify Sex Nut Bolts (SNB) where recommended or when required by the door manufacturer.Sex Nuts Bolts (SNB) are furnished with DXKB1024 (No. 10-24) for device or DXKB4120 (No. 1/4-20) for top rod latch and bottom rod latch.
Auxiliary Fire Bolt/Latch
P/N. DXAFLHeat activated. Used in Less Bottom Rod (L) option for fire exit devices. Included when ordering Less Bottom Rod (L) option.For door openings up to (WXH) 8x8 ft.
P/N. DXKG8010*For DXAS103 Rim strikeTwo (2) pieces furnished standard
P/N. DXKG8020*For DXAS203 StrikeTwo (2) pieces furnished standard
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
22 DOREX DX2
Top Rods
Device No. Part No. Rod Length For Door Height
DX2PV/FV DX2PW/FW
DXAVRT020*(Included with device)
36 11⁄88" (916mm) 7'
DXAVRT030* 48 11⁄88" (1221mm) 8'
DXAVRT030* Add DXAVRT040*†
48 11⁄88" (1221mm) Add 24" (609mm)
10'
DX2PC/FC DXACRT070*(Included with device)
37" (940mm) 7'
DXACRT080* 49" (1245mm) 8'
DXACRT080* Add DXACRT050*†
49" (1245mm) Add 23 77⁄88" (605mm)
10'
(†) Extension Rod
Bottom RodsFor exit device location at 39 55⁄88" (1006 mm) from finished floor.
Device No. Part No. Rod Length
DX2PV/FV DX2PW/FW
DXAVRB010*(included with device)
3177⁄88" (807mm)
DX2PC/FC DXACRB060*(included with device)
3133⁄44" (805mm)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
Accessories
23DOREX DX2
CylindersCylinders are not furnished standard with the device or trim and must be specified when required. Cylinders are Schlage® C keyway, 6-pin standard, and are available in satin chrome (626) finish. Interchangeable Cores (SFIC) are also available. Please consult your local sales representative prior to specifying to ensure proper selection or for additional keying services.
Cylinder type
Mortise Cylinder
SFIC Standard
Rim Cylinder
SFIC Standard
Cylinder Collar
P/N: 817DFor use with DX2TTR03
SFIC Core
Interchangeable cores are included with housings.
Specify, 6 or 7 pin, uncombinated (0-bitted) or less core.
Please contact your local sales representative for details and keying services.
Exit Device Applications
Trim Application
Cylinder Cyl. Length (Part/no.)
Cylinder Cam
08 / 11 for DX2PR/FR, DX2PV/FV, DX2PC/FC, DX2PW/FW
DX2TE
Standard 111⁄88" (MC118) DXACAM B
SFIC 111⁄44" (DXAICMH138F†) F*
Cylinder Dogging All Devices
Standard 111⁄44" (MC114) DXACAM A
SFIC 133⁄88" (DXAICMH138E†) E*
03 for DX2PR/FR, DX2PV/FV, DX2PC/FC, DX2PW/FW (Must use with Cylinder Collar Part/No.817D)
DX2TT
Standard 2 33⁄88" Tailpiece (MR118)
SFIC 1 33⁄44" Tailpiece (9807H)
03 / 09 / 12 for DX2PR/FR, DX2PV/FV, DX2PC/FC, DX2PW/FW
DX2TE
Standard 2 33⁄88" Tailpiece (MR118)
SFIC 1 33⁄44" Tailpiece (9807H)
† Special order - will require additional lead time and/or minimum order quantities.* Fixed cam, not available separately.
Cylinder Cam
Cam No. DXACAM A DXACAM B E F
Illustration
YX
Y
X XY Y
X
Dimension X=0.250" (6 mm) Y=0.625" (15 mm)
X=0.375" (9.5 mm) Y=0.750" (19 mm)
X=0.250" (6 mm) Y=0.625" (15 mm)
X=0.375" (9.5 mm) Y=0.750" (19 mm)
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
25DOREX DX2
Electrical
EL provides the ability to remotely retract the latchbolt. Continuous duty solenoid can retract latchbolts under condition of unlatching or continually dogging. The EL option can be applied with card readers, toggles or key switches, push buttons and fire alarm systems. PS100 or compatible power supply is required for the use of EL option.
• cULus Listed for Panic and Fire• EL is available with manual Flat/Hex Key for Panic Exit
Devices.
Solenoid Specifications:• Current Pulse (0.3 seconds): 24 VDC, 16 Amp.• Continuous: 24 VDC, 0.25 Amp
Requires PS100 or compatible power supply.
Applicability:For all DX2 Exit Devices.
To order:See How To Order, p. 30.
Electric Latch Retraction
EL (Electrical Dogging)
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
26 DOREX DX2
Micro-switch Detecting Push BarTwo internal switches are mounted into the device.One switch is designed to monitor Push Bar assembly. When there is unauthorized use of the device, the alarm will sound once the switch has been activated.
The other switch is to connect with the 111⁄44" (31.75mm) Mortise Cylinder with straight cam when alarm has been triggered. A power supply must be set from the frame to the door.
• cULus Listed for Panic and Fire
Electrical Ratings:24 VDC, 2 Amp SPDT.SPDT (Single Pole, Double Throw).
Requires PS100 or compatible power supply.
Applicability:For all DX2 Exit Devices.
To order:See How to Order, p.30.*Specify handing and finish.
Signal Switch
SS
Electrical
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
EMERGENCY EXITPUSH TO OPEN & SOUND ALARM
SORTIE DE SECOURSPOUSSEZ POUR OUVRIR ET SONNER L'ALARME
Push bar label.
27DOREX DX2
The alarm exit provides a simple way to audibly monitor the use of an exit device. The unit contains an alarm which is activated when the push bar is depressed. The alarm sounds at 85 db. The unit operates on one standard 9-volt alkaline battery. When the battery is weak, the horn will emit an intermittent low battery alert signal. Can also be powered using the PS100 or compatible power supply.
• cULus Listed for Panic and Fire
The AL requires a standard 111⁄44” (31.75 mm) mortise cylinder which is used as a key switch to perform the following functions:
• Silence the alarm after activation.
• Deactivate the alarm for continuous unmonitored egress.
The AL is available with 2 optional circuit boards:• External Inhibit (EI) allows the use of external switch to be
used to arm, disarm and reset the alarm.
Auto Reset (AR) rearms the alarm after a preset time. AR default setting time is 5 minutes, and can be manually switched to 111⁄22 or 3 minutes.
Applicability:For all DX2 Exit Devices for 3ft to 4ft wide doors.
To order:Configured exit devices with alarm kits are available with a choice of two switch kits, RX or LM. RX monitors the push bar and is furnished standard. See How to Order, p.30.
The alarm exit is also available in kits for retrofit on existing DX2 devices - see ordering chart below.
Alarm Exit
AL
DXA KA L 3 – 630SERIES STYLE TYPE MONITOR SIZE FINISH
SMOOTH SURFACE (DEFAULT)G - GROOVED SURFACE*
3 - 3FT DEVICE4 - 4FT DEVICE*
RX MONITOR (DEFAULT)L - LM MONITOR
630 - SATIN STAINLESS STEEL (32D)626 - SATIN CHROME (26D)*613 - OIL RUBBED BRONZE (10B)*605 - POLISHED BRASS (3)*
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
Electrical
EMERGENCY EXITPUSH TO OPEN – ALARM WILL SOUND
SORTIE DE SECOURSPOUSSEZ POUR OUVRIR – ALARME SONNERA
Door label.
28 DOREX DX2
Micro-switch Detecting Push BarThe RX feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the push bar. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply.
• cULus Listed for Panic and Fire
Electrical Ratings:
Switch rate: 24 VDC, 3 Amp SPDT.
SPDT (Single Pole, Double Throw).
Requires PS100 or compatible power supply.
Applicability:For all DX2 Exit Devices.
To order:
See How To Order, p. 30.
Micro-switch Detecting LatchboltThe LM feature is used to signal the use of an opening. This device is equipped with one internal SPDT switch which monitors the latchbolt. The device can be connected to a security console, or may be used as a single door alarm when used with a horn and power supply.
• cULus Listed for Panic and Fire
Electrical Ratings:
Switch rate: 24 VDC, 3 Amp SPDT.
SPDT (Single Pole, Double Throw).
Requires PS100 or compatible power supply.
Applicability:For all DX2 Exit Devices.
To order:
See How To Order, p. 30.
Request to Exit Latchbolt Monitoring
RX LM
Electrical
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
29DOREX DX2
The Delayed Egress Exit Device provides a controlled egress for openings which require panic or fire exit hardware for safe egress. It is a self-contained exit device that, when armed, will deny exit to unauthorized personnel for 15 or 30 seconds, while simultaneously sounding a local or remote audible alarm. The Remote Monitoring feature will alert the security personnel that an attempt is being made to exit the opening. After the 15 (or 30) second delay of egress period, the device will function as a standard exit device for safe egress.
• ULus Listed for Panic and Fire
Operation:The device secures the door in the locked mode with a red LED indicating locked status. Depressing the Push bar by accident or for less than the nuisance delay time will sound the alarm without initiating the alarm sequence. Depressing the Push bar with less than 15 pounds pressure, for longer than the nuisance delay time will initiate an irreversible local audible beeping tone and a visual Red indicator until the device releases. After the delay egress time, the lock releases and the alarm changes to a steady tone which continues to alarm until reset. The remote monitoring contact output can be used to alert security personnel.
Note:A “30 Seconds” decal is provided when the 30-second delay option is specified.
Solenoid Specifications:• Current Pulse (0.3 seconds): 24 VDC, 16 Amp.• Continuous: 24 VDC, 0.37 Amp
Requires PS100 or compatible power Supply.
Applicability:For all DX2 Exit Devices.
To order:
See How To Order, p.30.
Delayed Egress Device
DE
Door label.
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
Electrical
PUSH UNTIL ALARMDOOR CAN OPEN IN 15 SECONDS
POUSSER JUSQU’A L’ALARME PORTE PEUT OUVRIR EN 15 SECONDES
30 DOREX DX2
How To Order
* SPECIAL ORDER – WILL REQUIRE ADDITIONAL LEAD TIME AND/OR MINIMUM ORDER QUANTITIES.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. CONTACT LOCAL REPRESENTATIVE FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-02
T06.
012
DX
2-FG
-8x1
1-32
P-EN
R20
20-0
2-27
DX 1 AL P V L 3 7 C – 630 HSERIES STYLE ELECTRIC RATING TYPE ROD/LATCH WIDTH HEIGHT DOGGING FINISH STRIKE
BLANK = NOT REQUIRED
AL - ALARM EXIT*DE - DELAYED EGRESS*EM - ELECTRIC MORTISE*EL - ELECTRIC LATCH RETRACTION*LM - LATCHBOLT MONITORING*RX - REQUEST TO EXIT*SS - SIGNAL SWITCH*
SEE P.25–29
P - PANIC EXITF - FIRE EXIT
R - RIMV - SURFACE VERTICAL ROD*C - CONCEALED VERTICAL RODW - 3 POINT*D - DUMMY, INACTIVE*DA - DUMMY, ACTIVE*
SEE P.7–10
3 - 3 FT DEVICE4 - 4 FT DEVICE*
BLANK = (PANIC DEFAULT) HEX KEY DOGGING (FIRE DEFAULT) LESS DOGGING
C - CYLINDER DOGGING* (CYLINDER NOT INCLUDED)
L - LESS DOGGING*
630 - SATIN STAINLESS STEEL (32D)626 - SATIN CHROME (26D)*625 - POLISHED CHROME (26)*613 - OIL RUBBED BRONZE (10B)*612 - SATIN BRONZE (10)*611 - POLISHED BRONZE (9)*606 - SATIN BRASS (4)*605 - POLISHED BRASS (3)*
SEE P.4
BLANK = NOT REQUIRED (IE: DUMMY)
2 - WIDE HEAD, SMOOTH SURFACEG2 - WIDE HEAD, GROOVED SURFACE*
SEE P.4
BLANK = NOT REQ.
7 - 7 FT8 - 8 FT*9 - 9 FT*X - 10 FT*
BLANK = NOT REQUIRED OR DEFAULT (PULLMAN LATCH)
L - LESS BOTTOM ROD*R - ROUND BOTTOM LATCH*
EXIT DEVICE
DX 2 TE R A 09 LHR SC KD 6 – 630SERIES STYLE TRIM DEVICE DESIGN FUNCTION HANDING KEYWAY KEYING PINS FINISH
DEVICE TRIM
1 - NARROW STILE DEVICE
TP - PULL TRIM*TE - ESCUTCHEON TRIM
SEE P.14–17
BLANK = DEFAULT STYLE
K - PULL GRIP K*
Q - ESCUTCHEON LEVER Q*A - ESCUTCHEON LEVER A*K - ESCUTCHEON LEVER K*
SEE P.14–17
01 - TP / BLANK PLATE*02 - TP / DUMMY*03 - TP / NIGHT LATCH*
02 - TE / DUMMY (LEVER)*03 - TE / NIGHT LATCH*08 - TE / CLASSROOM (LEVER)09 - TE / NIGHT LATCH (LEVER)14 - TE / PASSAGE (LEVER)*
11 - TE / STOREROOM (THUMB TURN)*12 - TE / NIGHT LATCH (THUMB TURN)*16 - TE / PASSAGE (THUMB TURN)*
SEE PAGES 14-17
630 - SATIN STAINLESS STEEL (32D)*626 - SATIN CHROME (26D)625 - POLISHED CHROME (26)*613 - OIL RUBBED BRONZE (10B)*612 - SATIN BRONZE (10)*611 - POLISHED BRONZE (9)*606 - SATIN BRASS (4)*605 - POLISHED BRASS (3)*
SEE P.4
BLANK = NOT REQUIRED
SC - SCHLAGE CIA - SFIC A*IAZB - SFIC A, 0-BITTED*IALC - SFIC A, LESS CORE*
SEE P.23
R - RIM, VERTICAL OR 3-POINT
BLANK = NOT REQ.
5 - 5 PINS*6 - 6 PINS7 - 7 PINS*
BLANK = NOT REQUIRED
KD - KEYED DIFFERENTKA - KEYED ALIKE*KA2 - KEYED ALIKE, PAIR*
BLANK = (RHR) RIGHT HAND REV. BY DEFAULT
LHR - LEFT HAND REV.
A - DXA106B - DXA108C - DXA136*P - DXA203*D - DXA215*
E - DXA216F - DXA224*G - DXA225*H - DXA226*J - DXA227/227F
BLANK = DEVICE DEFAULT (SEE P.7–11)
SEE P.19–20
WarrantyDOREX warrants to the original purchaser that all products provided by it shall be free of defects in material and workmanship regarding Mechanical Exit Devices & Trims (5 years), Electrified Products (1 year) and finishes (1 year). The present warranty does not cover scratches, abrasions, deterioration due to the use of paints, solvents and other chemicals, normal wear and tear, abuse or any damage caused by improper installation or misuse of the product. Furthermore, the cost incurred in removing a defective product and installing a replacement product is not included in the warranty. Upon return of a defective product, DOREX may repair or replace the product.
Note: The warranty becomes effective from the date of shipment.
CAUTION: Any retrofit or other field modification to a fire-rated opening can potentially impact the fire rating of the opening, DOREX makes no representations or warranties concerning what such impact may be in any specific situation. When retrofitting any portion of an existing fire rated opening, or specifying and installing a new fire-rated opening, please consult with a code specialist or local code official (Authority having jurisdiction) to ensure compliance with all applicable codes and ratings.
It is important that only DX2 strikes and latches be used with DX2 exit devices. The use of third party or previously installed strikes is not recommended and may hamper performance and/or invalidate hardware certifications. As above, please consult with a code specialist or local code official (Authority having jurisdiction) to ensure compliance with all applicable codes and ratings.
1400PR 36 LHR – ALMODEL1 SIZE1 HAND2 FINISH
(1) SEE SELECTION GUIDE (2) FOR 1400PR INDICATE: LHR–LEFT HAND REVERSED, RHR – RIGHT HAND REVERSED; OMIT FOR 1400PV
Certifications • cUL listed, Panic Exit • 1 Year limited warranty
Rail Assembly • High strength aluminum extrusion• Field sizable
Handing • 1400PR: Handed (field reversible)• 1400PV: Non handed
Door Size • 30-36 x 84" (762-914 x 2134 mm) • 36-42 x 84" (914-1067 x 2134 mm) – option
Door Thickness • 133⁄44" (45 mm)• 2"(51 mm) and 211⁄44" (57 mm) – available*
Recommended for aluminum doors (*) Rim model only.
Stile Width • 133⁄44" (44.5 mm) minimum
Measured from door edge
Projection • 2 33⁄44" (70 mm) from door surface
Lock Case • Heavy duty steel deadlatch mortise lock• Adjustable mounting posts• 111⁄88" (28.6 mm) backset• Anodized aluminum flat faceplate
Cylinder • Not included, sold separately
Latchbolts • 1400PR: Stainless steel deadlatch• 1400PV: Stainless steel top & bottom latches
Vertical Rods • For 84" (2134 mm) door
1400PV36 concealed vertical rod model only
Dogging • Hex key dogging
Hardware • Machine screws
Finish AL–Aluminum; DU–Dark bronze
Other finishes available by special order
1400 SERIESNARROW STILE EXIT DEVICE
02.110ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-05.
MODEL SIZE DOOR SIZE1 DOGGING FINISH / CASE
1400PRPanic Exit Hardware Mortise Rim. Indicate required handing.
3630-36 x 84
(762-914 x 2134)• AL, DU 6
4236-42 x 84
(914-1067 x 2134)• AL, DU 6
1400PVPanic Exit Hardware Concealed Vertical Rod. Non-handed.
3630-36 x 84
(762-914 x 2134)• AL, DU 6
(1) RECOMMENDED DOOR SIZE, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT.
SELECTION GUIDE
PARTS & ACCESSORIES
MODEL A B C D E1 F G
1400PR/PV 362 33⁄44(70)
311⁄1616
(78)111⁄88
(28.6)133⁄44
(44.5)
33 77⁄88 (860) 1
(25.4)6 33⁄44
(171)1400PR 42
39 77⁄88 (1013)
IN(MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
1400KVE Mortise cylinder escutcheon mount. Aluminum (-AL) or Dark bronze (-DU) finish.
1400KRDT200 Extension kit for 2" (51 mm) thick doors. Includes 55⁄3232" (4 mm) spindle extension. For 1400PR only.
1400KRDT225 Extension kit for 2 11⁄44" (57 mm) thick doors. Includes 11⁄44" (6 mm) spindle extension. For 1400PR only.
CBM118AMortise cylinder, 111⁄88" (28.6 mm) long, with cam A.
CMCAMA Adams Rite-type cam.
1400ARCAM 1400AR exit device cam.
A
B
C
D
E
F
G
BACKSET
1400PR 1400PV
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-05.02.110 1400
2295PR 3 – 28MODEL SIZE FINISH
Certifications • UL listed, Panic Exit • 1 Year limited warranty
Rail Assembly • High strength aluminum• Field sizable
Handing • Non-handed
Door Width • 30–38" (762–965 mm) • 36–44" (914–1118 mm) –option
Door Thickness • 1 33⁄44" (45.5 mm)
Recommended for aluminum doors
Stile Width • 133⁄44" (44.5 mm) minimum
Measured from door edge
Projection • 21111⁄1616" (67 mm) from door surface
Latchbolt • Stainless steel
Strike • Steel, roller strike #2295S
Dogging • Hex key dogging
Hardware • Machine screws
Trims • Escutcheon trim – available
Sold separately, see 2295TE
Finish 20D–Dark bronze; 28–Aluminum
Other finishes available by special order
2295 SERIESNARROW STILE EXIT DEVICE
02.120ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-12.
MODEL SIZE DOOR WIDTH1 DOGGING FINISH / CASE
2295PRPanic Exit Hardware Rim Device
330–38
(762–965 )• 20D, 28 4
436–44
(914–1118 )(1) RECOMMENDED DOOR WIDTH, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT.
SELECTION GUIDE
PARTS & COMPONENTS
MODEL A B C D E1 F G H K M
2295PR32 1111⁄1616
(67)7 11⁄22
(191)111⁄44 (32)
23 11⁄44(591)
3511⁄22(902) 3 33⁄1616
(81)7 1515⁄1616
(201.6)133⁄44(44)
33⁄44(19)
2 11⁄1616
(52)2295PR4 4111⁄22
(1054)IN(MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
2295AD Dogging mechanism.
2295S Standard roller strike.
2295TE ESCUTCHEON TRIM
Trim 2295TE70
Function Entrance/Classroom
Finish20D-Dark bronze, 28-Aluminum
Lever Straight, no return
Cylinder1 111⁄44 (32) mortise
Door Thickness 1 33⁄44 (44.5)
Warranty 1 Year limited
IN (MM) (1) SOLID BRASS, 6-PIN CYLINDER, SCHLAGE “C”, 2 KEYS INCLUDED – KEYING SERVICES AVAILABLE
A
B
C
DE
F
G
H K
M2295TE70OPTIONAL
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-12.02.120 2295
NH900 -3MODEL FUNCTION1
(1) SEE SELECTION GUIDE FOR DETAILS **PLEASE INDICATE REQUIRED HANDING WHEN ORDERING
Certifications • Conforms to ANSI/BHMA A156.3, Grade 2• cUL listed, Panic Exit • 1 Year limited warranty
Handing • Handed, reversible
Door Thickness • 1 33⁄44" (45.5 mm)
Stile Width • 3" (76 mm) minimum
Measured from door edge
Projection • 4 33⁄44" (121 mm) from door surface
Latchbolt • Solid brass, 33⁄44" (19 mm)
Crossbar • Field sizable• 38" (965 mm) steel tube • 48" (1219 mm) steel tube – available
Strike • Steel, standard type (NHT10)
Dogging • Hex key dogging
Hardware • Machine screws
Functions -1 Exit only, no trim-3 Passage, handleset trim – included-4 Night latch, pull trim – included*-5 Entrance, handleset trim – included*
(*) Keyed functions use standard rim cylinder, sold separately
Finish Aluminum
Other finishes available by special order
NH900 SERIESCROSSBAR EXIT DEVICE
LEFT HAND REVERSE MODEL SHOWN
02.200ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2018-09
NH911 Crossbar end cap with screw.
NH912 Conversion kit, function #1 to #5.
NH913 Conversion kit, function #1 to #4.
NH914Exterior trim, function #4. Included with NH900-4.
NH915Exterior trim, function #5.Included with NH900-5.
NH926 38" (965 mm) steel crossbar tube, chrome
NH926-48 48" (1219 mm) steel crossbar tube, chrome
NHST10Standard strike for panic rim device.
NHST11Overlapping strike for double doors without mullion. See instructions for details.
NH990Dogging screw
NH995Coil spring for bar levers
NH998Latch spring
MODEL FUNCTION DOGGING FINISH / CASE
NH900-1 Exit only, no exterior trim #1 • Aluminum 12
NH900-3 Passage, pull trim, latch always free #3 • Aluminum 6
NH900-4Nightlatch, pull trim, latch activated by exterior rim cylinder, always locked*
#4 • Aluminum 6
NH900-5Entrance, handleset trim, latch activated by exterior thumb piece, except when locked by exterior cylinder*
#5 • Aluminum 6
(*) RIM CYLINDER NOT INCLUDED, SOLD SEPARATELY
SELECTION GUIDE
MODEL A B C D E1 F G H K M P Q
NH900-14 33⁄44
(121)2 11⁄88 (54)
8 11⁄22 (216)
2 1111⁄1616 (68)
38 (965)
2 33⁄1616 (55)
4 55⁄88 (117)
2(51)
— — — —
NH900-3/4/5 16 (406)
3 11⁄22 (89)
2 11⁄1616 (52)
7 11⁄22 (190)
IN (MM) (1) CAN BE CUT TO SIZE - SEE PRODUCT INSTALLATION INSTRUCTIONS
PARTS & COMPONENTS
C
B
A
D
E
F H
GK
M
P
Q
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2018-0902.200 DOREX NH900
1195 C28 LHRMODEL1 FINISH HAND2
(1) SEE SELECTION GUIDE (2) LHR –LEFT HAND REVERSED RHR –RIGHT HAND REVERSED
Certifications • UL listed, Panic Exit • 1 Year limited warranty
Handing • 1185: Non-handed (concealed vertical rod) • 1195: Handed (rim)
Door Size • 30–36 x 84" (711–914 x 2134 mm) • 36–48 x 84" (914–1219 x 2134 mm) *
(*) With #1185-48 crossbar, sold separately
Door Thickness • 1 33⁄44" (45.5 mm)
Recommended for aluminum doors
Stile Width • 133⁄44" (44.5 mm) minimum
Measured from door edge
Projection • 455⁄88" (118 mm) from door surface
Latchbolts • Zinc alloy, 11⁄22" (12.7 mm)
Vertical Rods • Standard for 7' (2134 mm) door
1185 concealed vertical rod model only
Crossbar • Field sizable• 36" (965 mm) aluminum extrusion• 48" (1219 mm) aluminum extrusion – available
Strike • 1185: Standard steel top & bottom strikes• 1195: Roller type steel strike #1195S
Dogging • 1185: by outside cylinder• 1195: by slotted key
Hardware • Machine screws
Finish C20D–Dark bronze; C28–Aluminum
Other finishes available by special order
1100 SERIESNARROW STILE CROSSBAR EXIT DEVICE
02.210ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.
1185-4848" (1219 mm) extruded aluminum crossbar. Available in aluminum (C28) or dark bronze (C20D) finish. Can be field cut to required size.
1170Cylinder mounting kit with locking ring for #1185. Available in aluminum (C28) or dark bronze (C20D) finish.
1185GTop & bottom rod guides for #1185.
40-809Lever extension spring for #1185.
1195PADActive pad for #1195. Indicate required handing. Available in aluminum (C28) or dark bronze (C20D) finish.
1195SRoller-type strike for #1195 panic rim device.
50-979Dogging pins and slotted key for #1195.
MODEL DOOR SIZE1 DOGGING2 FINISH / CASE
1185Panic exit hardware concealed vertical rod crossbar, non-handed
30–36 x 84 (762–914 x 2134)
• C20D, C28 6
1195 Panic exit hardware rim crossbar, handed30–36 x 84
(762–914 x 2134)• C20D, C28 6
(1) RECOMMENDED DOOR SIZE, IN (MM), FOR NON-STANDARD SIZES OR INSTALLATIONS PLEASE CONTACT. (2) 1185: BY CYLINDER 1195: BY SLOTTED KEY
SELECTION GUIDE
MODEL A B C D E1 F G H K M P R S
11854 55⁄88
(117)2
(51)7 33⁄88
(187)1 11⁄44(32)
36(914)
1 11⁄22(38)
1 11⁄22 (38)
1(25)
1 33⁄3232 (28)
33⁄88 (9.5)
133⁄3232 (28)
1155⁄16 16
(24)1 11⁄22 (38)
1195 — — — — — — —
IN (MM) (1) CAN BE CUT TO SIZE; 48" (1219 MM) BAR AVAILABLE
PARTS & COMPONENTS
AB
C
D
F
E
1195
TOP
BOTTOM
1185
G
H
K
M
P
R
S
ø
ACTIVE PAD
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-04.02.210 DOREX 1100
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2021-04.
DOOR CONTROL TABLE OF CONTENTS
Door Closer Guide ........................................................................................................................................ii Door Closer Features.....................................................................................................................................ii Door Handing Guide .....................................................................................................................................ii Finish Guide ..................................................................................................................................................iii Abbreviation Guide .......................................................................................................................................iii
SURFACE DOOR CLOSERS
DOREX 441HD Series, Heavy Duty, Grade 1 .................................................................................................03.005 D8DIVISION8 4000 Series ............................................................................................................................03.008
DOREX 1901 Series, Grade 1 .......................................................................................................................03.010 DOREX 1900 Series ......................................................................................................................................03.011
DOREX CCL 5400 Series ..............................................................................................................................03.020DOREX 1701 Series, Grade 1 .......................................................................................................................03.022DOREX 1700 Series ......................................................................................................................................03.024DOREX 1761 Series ......................................................................................................................................03.026
851 Series .....................................................................................................................................................03.030
DOREX 700 Series ........................................................................................................................................03.040D8DIVISION8 60 Series ................................................................................................................................03.042D8DIVISION8 300 Series ..............................................................................................................................03.044TC603 Series.................................................................................................................................................03.046
CONCEALED DOOR CLOSERS
DOREX 3000 Series, Concealed in door ........................................................................................................03.050 DOREX 30 Series, Concealed in transom ......................................................................................................03.052 DOREX 40 Series, Concealed in floor ............................................................................................................03.054
Concealed Spring Closers..............................................................................................................................03.056
PF100 Hydraulic Patch Fitting Closer .............................................................................................................03.060 PF102 Hydraulic Patch Fitting Closer .............................................................................................................03.062
AUXILIARY
Door Check ..................................................................................................................................................03.072
OVERHEAD HOLDERS & STOPS
Concealed ....................................................................................................................................................03.100 Surface Mounted ..........................................................................................................................................03.102
DOOR COORDINATORS
Surface Mounted ..........................................................................................................................................03.200 Gravity Coordinator ......................................................................................................................................03.201 Mullion .........................................................................................................................................................03.210
ELECTROMAGNETIC DOOR HOLDERS
Wall Mounted...............................................................................................................................................03.300 Floor Mounted ..............................................................................................................................................03.301
i
R20210420
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-03.
DOOR CONTROL GENERAL INFORMATION
PLEASE CONTACT OUR DOOR HARDWARE SPECIALISTS IF YOU HAVE ANY QUESTIONS CONCERNING OUR PRODUCTS OR NEED ASSISTANCE IN SELECTING THE CORRECT DOOR HARDWARE FOR YOUR APPLICATION OR SITUATION.
DOOR CLOSER GUIDE
DOOR CLOSER FEATURES
SWEEP RANGE
LATCH RANGE
CLOSED
10˚
DELAY RANGE
LATCH RANGE
CLOSED
Delay release point
10˚
SWEE
P
RANGE
~70˚
60˚ / 85˚
BACKCHECK
OPEN
ING
SWEEP / LATCH SPEED DELAYED ACTION BACKCHECK
REGULAR MOUNT(PULL SIDE)
TOP JAMB MOUNT(PUSH SIDE)
PARALLEL MOUNT(PUSH SIDE)
DOOR HANDING GUIDE
LEFT HAND (LH)
LEFT HAND REVERSED (LHR)
RIGHT HAND (RH)
RIGHT HAND REVERSED (RHR)
PUSH SIDEPUSH SIDE
PULL SIDE PULL SIDE
PUSH SIDE
PULL SIDE PULL SIDE
PUSH SIDE
ii
NOTE: CUSHIONING BACKCHECK DOES NOT REPLACE A PHYSICAL DOOR STOP.
DOOR CONTROL GENERAL INFORMATION
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-12.iii
ALUMINUM BRASS DARK BRONZE MATTE BLACK SATIN NICKELCODE AL, C28, 28 BP, PB, C3, 3 DU, C20D, 20D MB, C19, 19 SDN, SN, C15, 15
BHMA* 628, 689 605, 632, 677 649, 650, 690 622, 631 619, 646
SATIN CHROME SATIN STAINLESS STEEL POLISHED STAINLESS STEEL PLAIN STEEL, NO FINISHCODE SC, C26D, 26D SS, C32D, 32D C32, 32 PS, SP
BHMA* 626, 652 630 629
PAINTED PAINTEDPLATED
ALL FINISHES IMAGES ABOVE ARE PHOTOGRAPHIC OR COLOUR APPROXIMATIONS, DELIVERED PRODUCT MAY VARY. OTHER FINISHES AVAILABLE–PLEASE CONTACT.(*) EQUIVALENT; CODES DIFFER DEPENDING ON BASE MATERIAL
FINISH GUIDE
GENERALDIA, ø DiameterKG KilogramsLBS PoundsLH Left handLHR Left hand reversedMAX MaximumMIN MinimumN/A, — Not applicable / Not availableQTY Quantity (usually followed by notes)RH Right handRHR Right hand reversedSQ, SquareWT Weight
/UNIT Number of items per basic unit of sale (bagged or boxed)
/BOX, /BAG Number of UNITS found in an inner carton or bag
/CASE Number of BOXES or UNITS found in an outer (shipping) carton
ABBREVIATION GUIDE
441HD BC – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • Certified ANSI/BHMA A156.4, Grade 1• cULus listed• ADA compliant, barrier free • 10 Year limited warranty
Power Size • Adjustable size 1-6 (preset 3)See selection guide for details
Body Material • Heavy duty precision cast iron body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve• Latching speed adjustment valve• Cushioning backcheck adjustment valve• Delayed action adjustment valve
Cover • Full body plastic cover, painted finish
Handing • Non-handed
Opening • 120° maximum • 180° maximum with parallel arm
Mounting • Tri-Pack: regular1, top jamb1, parallel arm2 • Drop plates – available(1) Arm allows 15% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts
Available Arms
• Extra duty parallel arm • Heavy duty cushion stop arm, hold open • Heavy duty cushion stop arm, no hold open • Heavy duty spring stop arm, no hold open• Arm extension rod
Finish AL–Aluminum, painted; MB–Matte black, paintedOther finishes available by special order
441HD SERIESHEAVY DUTY DOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12. 03.005
MODEL A B C D E F
441HD 1 (25) 3 (76) 233⁄44 (70) 1111⁄1616 (281) 2 (51) 211⁄4 4 (57)
441HD with cover 1 (25) 3 (76) 311⁄22 (89) 1233⁄16 16 (309) 211⁄44 (57) 211⁄44 (57)IN (MM)
SELECTION GUIDE
03.005 DOREX 441HD ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
A B
C
D E
A
F
COVER
ARM441HDCHeavy duty cushion stop arm, no hold open.
ARM441HDHHeavy duty cushion stop arm, hold open. Included with 441HDBCH.
ARM441HDEParallel arm for extra-duty applications.
ARM441HDLR Long forearm link for reveal up to 5" (127 mm).
DP441HD-18PA For parallel arm installations where the door top rail height is insufficient for direct mounting.
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
SNBS1420 Steel sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
PARTS & ACCESSORIES
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
441HD BC REGULAR ARM
1–6330(150)
60 (1524)
48 (1219)
• • AL, MB 2441HD BC H CUSHION-STOP ARM, HOLD OPEN*
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES) (*) NOT FOR USE ON FIRE RATED DOORS
4000 CNS – ALMODEL ARM FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • Conforms to ANSI/BHMA A156.4, Grade 1• cULus listed• ADA compliant, barrier free• 10 Year limited warranty
Power Size • Adjustable size 1-6 (preset 3)See selection guide for details
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve• Latching speed adjustment valve• Cushioning backcheck adjustment valve
Cover • Full body plastic cover, painted finish
Handing • Non-handed
Opening • 120° maximum • 180° maximum with parallel arm
Mounting • Tri-Pack: regular1, top jamb1, parallel arm2 • Drop plates – available(1) Arm allows 15% power adjustment(2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts
Available Arms
• Regular arm• Extra duty parallel arm• Friction hold open arm• Heavy duty cushion stop arm, hold open• Heavy duty cushion stop arm, no hold open• Arm extension rod
Finish AL–Aluminum, painted; DU–Dark bronze, paintedOther finishes available by special order
4000 SERIESDOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-03. 03.008
4000-ARM Regular arm. Included with 4000.
4000-CSAHeavy duty cushion stop arm, hold open. Included with 4000HC.
4000-CSANHOHeavy duty cushion stop arm, no hold open. Included with 4000CNS.
4000-3049Adjustable friction hold open arm, for standard or top jamb installation with reveal up to 333⁄44" (95 mm).
4000-3049PSame as 4000-3049, with parallel arm bracket.
4000-3077EDA Parallel arm for extra-duty applications
4000-LR Long forearm link for reveal up to 5" (127 mm). Included with 4000EA.
4000-18 For regular installations where the door top rail height is insufficient for direct mounting.
4000-18G Narrow plate for top jamb installations where low ceiling prevents mounting.
4000-18PA For parallel arm installations where the door top rail height is insufficient for direct mounting.
4000-18TJ For top jamb installations where the door frame header height is insufficient for direct mounting.
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
MODEL A B C D E F
4000 1 (25) 3 (76) 233⁄44 (70) 1111⁄44 (285) 11515⁄16 16 (49) 211⁄4 4 (57)
4000 with cover 1 (25) 3 (76) 377⁄1616 (88) 1211⁄4 4 (310) 255⁄1616 (53) 211⁄44 (57)IN (MM)
PARTS & ACCESSORIES
SELECTION GUIDE
03.008 D8DIVISION8 4000 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-03.
A B
C
D E
A
F
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
4000 REGULAR ARM
1–6330(150)
60 (1524)
48(1219)
• —AL, DU 6
4000 EA EXTENDED FOREARM
AL 6
4000 CNS CUSHION-STOP ARM, NO HOLD OPEN
1–6330(150)
60 (1524)
48(1219)
• —AL 4
4000 HC CUSHION-STOP ARM, HOLD OPEN*
AL 4
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES) (*) NOT FOR USE ON FIRE RATED DOORS
1901BC – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • Certified ANSI/BHMA A156.4, Grade 1• cULus listed• ADA compliant, barrier free• 10 Year limited warranty
Power Size • Adjustable size 1-6 (preset 3)See selection guide for details
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid• Operating range of 49º to -35º C (120º to -30º F)
Adjustments • Sweep speed adjustment valve• Latching speed adjustment valve• Cushioning backcheck adjustment valve• Delayed action adjustment valve – option
Cover • Full body plastic cover, painted finish
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-Pack: regular1, top jamb1, parallel arm2 • Drop plates available(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts
Available Arms
• Friction hold open arm• Heavy duty cushion stop arm, hold open• Heavy duty cushion stop arm, no hold open• Heavy duty spring stop arm, no hold open
Finish AL–Aluminum, painted; BP–Brass, painted; DU–Dark bronze, painted; MB–Matte black, paintedOther finishes available by special order
1901 SERIESDOOR CLOSER
03.010ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
1901-CSAHeavy-duty cushion stop arm, hold open. Included with 1901HC door closer.
1901-CSANHOHeavy-duty cushion stop arm, no hold open. Included with 1901NHC door closer.
1901-SCSANHOHeavy-duty cushion spring stop arm, no hold open.
1901-ARMFRegular arm with adjustable friction hold open. Includes parallel arm bracket.
1901-DPTJN Narrow plate for top jamb installations with low ceiling clearance or limited available mounting surface.
1901-DPPA For parallel arm installations where the door top rail height is insufficient for direct mounting.
SNBS1420 Steel sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
MODEL A B C D E
1901 111⁄88 (29)
1111⁄88 (283)
2 (51)
1177⁄88 (302)
233⁄8 8
(61)
1901 with cover 111⁄88 (29)
1111⁄88 (283)
3 (76)
1211⁄8 8
(308)211⁄22 (64)
IN (MM)
A
B
C
D E
PARTS & ACCESSORIES
SELECTION GUIDE
03.010 DOREX 1901 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
1901 BC REGULAR ARM
1–6330(150)
54(1372)
48(1219)
• — AL, BP, DU, MB 6
1901 BC DA REGULAR ARM
• • AL 6
1901 HC CUSHION-STOP ARM, HOLD OPEN*
1–6330(150)
54(1372)
48(1219)
• — AL 4
1901 NHC CUSHION-STOP ARM, NO HOLD OPEN
• — AL 4
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES) (*) NOT FOR USE ON FIRE RATED DOORS
1900BF – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • Conforms to ANSI/BHMA A156.4, Grade 1• cULus listed• ADA compliant barrier free model – available• 10 Year limited warranty
Power Size • Adjustable size 2-6 (preset 3)• Adjustable size 1-4 (preset 2), barrier freeSee selection guide for details
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid• Operating range of 49º to -35º C (120º to -30º F)
Adjustments • Sweep speed adjustment valve• Latching speed adjustment valve• Cushioning backcheck adjustment valve• Delayed action adjustment valve – option
Cover • Full body plastic cover, painted finish• Full body metal cover, plated finish
(BP finish only) – option
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-Pack: regular1, top jamb1, parallel arm2 • Drop plates – available(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts
Available Arms
• Regular arm with adjustable hold open• Heavy duty cushion stop arm, hold open• Heavy duty cushion stop arm, no hold open• Sliding arm, hold open• Sliding arm, no hold open
Finish AL–Aluminum, painted; BP–Brass, plated; DU–Dark bronze, painted; MB–Matte black, painted Other finishes available by special order
1900 SERIESDOOR CLOSER
03.011ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-02.
CSA1900Heavy-duty cushion stop arm, hold open.
CSANHO1900Heavy-duty cushion stop arm, no hold open.
SAHO1900Slide arm, hold open.
SANHO1900Slide arm, no hold open.
HOA1900 Regular arm with adjustable hold open and parallel arm bracket.
DP1900 For parallel arm installations where the door top rail height is insufficient for direct mounting.
735Parallel arm bracket.
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
MODEL A B C D E
1900 111⁄88 (29)
1111⁄88 (283)
2 (51)
1177⁄88 (302)
233⁄8 8
(61)
1900 with cover 111⁄88 (29)
1111⁄88 (283)
3 (76)
1211⁄8 8
(308)211⁄22 (64)
IN (MM)
A
B
C
D E
PARTS & ACCESSORIES
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
1900 2–6330(150)
54(1372)
48(1219)
• —AL, BP, DU, MB
6
1900 BF 1–4265(120)
48(1219)
42(1067)
• • AL, DU 6
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
03.011 DOREX 1900 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
03.020
5400 BC – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • Conforms to ANSI/BHMA A156.4, Grade 1• cULus listed• ADA compliant barrier free model –available• 15 Year limited warranty
Power Size • Adjustable size 2-5 (preset 3) • Adjustable size 1-4 (preset 2), barrier free• Fixed power size 3, 4 or 5 See selection guide for details
Body Material • Cast aluminum alloy, painted finish
Mechanism • Hydraulic rack and pinion
Fluid • Non-gumming, non-freezing hydraulic fluid• Operates: 49º to -35º C (120º to -30º F)
Adjustments • Sweep speed valve • Latching speed valve • Cushioning backcheck valve – option• Delayed action valve – option
Cover • Plastic pinion cap, painted finish• Slim plastic cover, painted finish – available
Handing • Non-handed
Opening • 180° maximum
Mounting • Regular1 and top jamb1 • Parallel arm2 – available• Drop plates – available(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood & machine screws • Sex nuts & thru-bolts – available
Available Arms
• Regular arm • Friction hold open arm • Cushion stop arm, hold open• Cushion stop arm, no hold open• Arm extension rod
Finish AL–Aluminum, painted; DU–Dark bronze, paintedOther finishes available by special order
CCL 5400 SERIESDOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
5400-ARMRegular arm, adjustable length and power shoe. Included with all models.
5400-ARMFFriction hold open arm. For regular or top jamb installations with reveal up to 4" (102 mm).
5400-CSACushion stop arm, hold open.
5400-CSANHOCushion stop arm, no hold open.
5400-EXTArm extension rod for top jamb installation with reveal between 233⁄44–533⁄44" (70–146 mm).
5400-CVR Plastic body cover, non handed. L x H x W: 10 33⁄88 x 2 11⁄88 x 3 11⁄88" (264 x 54 x 79 mm)
5400-DPTJ For regular or top jamb arm installations with limited available mounting surface.
5400-DPTJN Narrow plate for top jamb installations with low ceiling clearance or limited available mounting surface.
5400-PB Parallel arm mounting bracket for 5400-ARM.
5400-PBF Parallel arm mounting bracket for 5400-ARMF.
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
03.020 DOREX CCL 5400
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
5400 BC 2–5 60–265 (27–120) 54 (1372) 48 (1219) • — AL, DU 6
5400 BFDA 1– 4 33–190 (15–86) 48 (1219) 42 (1067) — • AL, DU 6
5403 BC 3 85–140 (38–63) 42 (1067) 36 (914) • — AL, DU 6
5404 BC 4 125–190 (57–86) 48 (1219) 42 (1067) • — AL, DU 6
5405 BC 5 175–265 (80–120) 54 (1372) 48 (1219) • — AL, DU 6CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E F
5400 33⁄44 (19) 911⁄1616 (230) 11313⁄1616 (46) 933⁄44 (248) 21133⁄1616 (71) 41155⁄1616 (125)
5400 with cover1 33⁄44 (19) 911⁄1616 (230) 211⁄88 (54) 1033⁄88 (264) 311⁄88 (79) 41155⁄1616 (125)
IN (MM) (1) ALL MODELS INCLUDE PINION CAP ONLY, BODY COVER #5400-CVR SOLD SEPARATELY.
A
B
C
D
F
E
PARTS & ACCESSORIES
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12..
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
Certifications • Certified ANSI/BHMA A156.4, Grade 1• cULus listed• ADA compliant, barrier free• 10 Year limited warranty
Power Size • Adjustable size 1–5 (preset 3)
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve • Latching speed adjustment valve • Cushioning backcheck adjustment valve
Cover • Low-profile, plastic cover with pinion cap, painted finish
Handing • Non-handedOpening • 180° maximum
Mounting • Tri-pack: regular1, top jamb1 or parallel arm2
• Drop plates – available(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts
Available Arms
• Regular arm
Finish AL–Aluminum, painted; DU–Dark bronze, painted; MB–Matte black, painted Other finishes available by special order
1701 SERIESDOOR CLOSER
03.022
1701 BC – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
SNBS1420 Steel sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
1701-DP Narrow plate for top jamb installations with low ceiling clearance or for regular arm installations where the door top rail height is insufficient for direct mounting.
1701-DPPA For parallel arm installations where the door top rail height is insufficient for direct mounting.
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
1701 BC 1–5265(120)
48(1219)
42(1067)
• — AL, DU, MB 10
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E
170133⁄44
(19)911⁄1616
(230)133⁄44
(44.5)933⁄44
(248)277 ⁄8 8
(73)
1701 with cover133⁄44
(19)911⁄1616
(230)211⁄1616 (53)
1099 ⁄16 16
(269)3
(76)
IN (MM) (1) ALL MODELS INCLUDE PINION CAP AND SLIM BODY COVER.
A
B
C
D E
PARTS & ACCESSORIES
03.022 DOREX 1701
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
1700 BF – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • cULus listed• ADA compliant barrier free model –available • 5 Year limited warranty
Power Size • Adjustable size 2-5 (preset 3)• Adjustable size 1-4 (preset 2), barrier freeSee selection guide for details
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve • Latching speed adjustment valve • Cushioning backcheck adjustment valve
Cover • Low-profile, plastic cover with pinion cap, painted finish
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-pack: regular1, top jamb1 or parallel arm2
• Drop plates – available(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts
Available Arms
• Regular arm• Sliding arm, hold open• Sliding arm, no hold open
Finish AL–Aluminum, painted; BP–Brass, painted; DU–Dark bronze, painted Other finishes available by special order
1700 SERIESDOOR CLOSER
03.024
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
ARM754Replacement regular arm.
SAHO1900Slide arm, hold open.
SANHO1900Slide arm, no hold open.
DP754 For parallel arm installations where the door top rail height is insufficient for direct mounting.
735Parallel arm bracket.
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
1700 2–5265(120)
48(1219)
42(1067)
• — AL, BP, DU 10
1700 BF 1–4190(86)
42(1067)
— • — AL 10
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E
170033⁄44
(19)911⁄1616
(230)133⁄44
(44.5)933⁄44
(248)277 ⁄8 8
(73)
1700 with cover133⁄44
(19)911⁄1616
(230)211⁄1616 (53)
1099 ⁄16 16
(269)3
(76)
IN (MM) (1) ALL MODELS INCLUDE PINION CAP AND SLIM BODY COVER.
A
B
C
D E
PARTS & ACCESSORIES
03.024 DOREX 1700
1761 – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • cULus listed• ADA compliant, barrier free • 5 Year limited warranty
Power Size • Adjustable size 1–5 (preset 3) See selection guide for details
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve • Latching speed adjustment valve • Cushioning backcheck adjustment valve
Cover • Plastic pinion cap, painted finish
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-pack: regular1, top jamb1 or parallel arm2
(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex-nut thru-bolts
Available Arms • Regular arm
Finish AL–Aluminum, painted; DU–Dark bronze, paintedOther finishes available by special order
1761 SERIESDOOR CLOSER
03.026ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
1761 1–5190 (86)
48 (1219)
42(1067)
• — AL, DU 10
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E
176133⁄44
(19)911 ⁄1616 (230)
11313 ⁄1616 (46)
999⁄1616 (244.6)
21313 ⁄1616 (71)
IN (MM)
A
B
C
D E
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.03.026 DOREX 1761
851 BC – ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • Certified ANSI/BHMA A156.4, Grade 1• cULus listed• ADA compliant, barrier free • 10 Year limited warranty
Power Size • Adjustable size 1-6 (preset 3)
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve • Latching speed adjustment valve • Cushioning backcheck adjustment valve• Delayed action adjustment valve - option
Cover • Narrow plastic cover with pinion cap, painted finish
• Full body plastic cover, painted finish – available
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-Pack: regular1, top jamb1, parallel arm2 • Drop plates – available(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts – available
Available Arms
• Regular arm, friction hold open• Heavy duty cushion stop arm, no hold open• Heavy duty cushion stop arm, hold open • Heavy duty spring cushion stop arm, no
hold open
Finish • AL–Aluminum, paintedOther finishes available by special order
851 SERIESDOOR CLOSER
03.030ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-04.
CSA851Heavy duty cushion stop arm, hold open.
CSANHO851Heavy duty cushion stop arm, no hold open.
SCSANHO851Heavy duty cushion spring stop arm, no hold open.
851-ARMFRegular arm with adjustable friction hold open. Includes parallel arm bracket.
851-EXT Long forearm link for reveal up to 4" (102 mm).
FULLCOVER851 Full body plastic cover. L x W x D: 13 x 3 x 211⁄1616" (330 x 76 x 52 mm)
851-DP For regular installations where the door top rail height is insufficient for direct mounting.
851-DPTJ For top jamb installations where the door frame header height is insufficient for direct mounting.
851-DPPA For parallel arm installations where the door top rail height is insufficient for direct mounting.
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
MODEL A B C D E
851 WITH NARROW COVER1 33⁄44 (19)
111515⁄1616 (303)
177⁄88 (47) 1233⁄44 (324) 2 (50.5)
851 WITH FULL BODY COVER1 3 (76) 13 (330) 211⁄16 16 (54.5)IN (MM) (1) PIVOT CAP AND NARROW COVER INCLUDED; FULL BODY COVER SOLD SEPARATELY
A
B
C
D E
PARTS & ACCESSORIES
MODELPOWER
SIZEWEIGHT
CAPACITY1
MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
851 BC 1–6 265 (120)
54(1372)
48(1219)
• — AL 6
851 BC DA 1–6 • • AL 6CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-04.03.030 851
03.040
754 ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • cULus listed • 5 Year limited warranty
Power Size • Fixed power size 1,2, 3, 4 or 5See selection guide for details
Body Material • Cast aluminum alloy, painted finish
Mechanism • Hydraulic rack and pinion
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed valve • Latching speed valve • Cushioning backcheck valve – option
Cover • Plastic pinion cap, painted finish
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-pack: regular1, top jamb1 or parallel arm2
• Drop plates – available(1) Arm shoe allows ±7.5% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood & machine screws • Sex nuts & thru-bolts – available
Available Arms
• Regular arm
Finish AL–Aluminum, painted; BP–Brass, painted;DU–Dark bronze, paintedOther finishes available by special order
700 SERIESDOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.
ARM754Arm for 752 to 785 door closers.
DP754 For parallel arm installations where the door top rail height is insufficient for direct mounting. (Models 754 / 755).
715Parallel arm bracket (sizes 1 & 2).
735Parallel arm bracket (sizes 3, 4 and 5).
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
03.040 DOREX 700
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
751 133–80(15–36)
32(813)
— — — AL, BP, DU 10
752 255–100(25–45)
36(914)
— — — AL, BP, DU 10
753 390–145(40–66)
44(1118)
— — — AL, BP, DU 10
7544
125–190(57–86)
48(1219)
36(914)
— — AL, BP, DU 10
784 • — AL, DU 10
7555
175–265(80–120)
52(1321)
44(1118)
— — AL, BP, DU 10
785 • — AL, DU 10CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E
751 33⁄44 (19) 611⁄22(165) 11111⁄1616 (43) 711⁄88 (181) 299⁄1616 (65)
752/753 33⁄44 (19) 833⁄1616 (208) 133⁄44 (45) 877⁄88 (225) 277⁄88 (73)
754/755 (784/785) 33⁄44 (19) 911⁄1616 (230) 133⁄44 (45) 933⁄44 (248) 277⁄88 (73)IN (MM)
A
B
C
D E
PARTS & ACCESSORIES
03.042
61 ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • cULus listed • 5 Year limited warranty
Power Size • Fixed power size 1,2, 3, 4 or 5See selection guide for details
Body Material • Cast aluminum alloy, painted finish
Mechanism • Hydraulic rack and pinion
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed valve • Latching speed valve• Cushioning backcheck valve – option
Cover • Plastic pinion cap, painted finish
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-pack: regular1, top jamb1 or parallel arm2
• 163/1063, 164/1064, 1065 models do notinclude parallel arm bracket
• Drop plates – available(1) Arm shoe allows ±7.5% power adjustment(2) May reduce spring power efficiency by 25%
Hardware • Wood & machine screws • Sex nuts & thru-bolts – available
Available Arms
• Regular arm• Sliding arm• Regular arm, hold open – option
Finish AL–Aluminum, painted; DU–Dark bronze, paintedOther finishes available by special order
60 SERIESDOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-03.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-03.
SA1020CSliding arm.
5400-EXTArm extension rod for top jamb installation with reveal between 233⁄44–533⁄44" (70–146 mm).
5400-DPTJ For regular or top jamb arm installations with limited available mounting surface.
5400-DPTJN Narrow plate for top jamb installations with low ceiling clearance or limited available mounting surface.
5400-PBParallel arm bracket.
5400-PBFParallel arm bracket for 163 or 164 hold-open arm closer.
SNB1420 Sex nut & thru-bolt kit (4) for doors 133⁄44" (44.5 mm) thick.
03.042 D8DIVISION8 60
MODELPOWER
SIZEWEIGHT
CAPACITY1
MAX. DOOR WIDTH2
BACKCHECKHOLD OPEN
DELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
61 1 33–66 (15–30) 32 (813) — — — — AL 10
62 2 55–100 (25–45) 36 (914) 32 (813) — — — AL 10
63
390–145(40–66)
44(1118)
36(914)
— — — AL 10
163* — • — AL 10
1063* • — — AL, DU 10
64
4125–190(57–86)
48 (1219)
44 (1118)
— — — AL, DU 10
164* — • — AL 10
1064* • — — AL, DU 10
655
175–265(80–120)
52(1321)
48(1219)
— — — AL, DU 10
1065* • — — AL, DU 10CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (*) PARALLEL ARM BRACKET NOT INCLUDED (1) WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E
61 33⁄44 (19) 633⁄88 (162) 199⁄1616 (39) 711⁄1616 (179) 299⁄1616 (65)
62 33⁄44 (19) 733⁄88 (187) 133⁄44 (45) 811⁄1616 (205) 21515⁄1616 (74)
63/163 33⁄44 (19) 833⁄1616 (208) 133⁄44 (45) 877⁄88 (225) 21515⁄1616 (74)
64/164/1064 33⁄44 (19) 911⁄1616 (230) 11313⁄1616 (47) 933⁄44 (248) 3 (76)
65/1065 33⁄44 (19) 911⁄1616 (230) 11313⁄1616 (47) 933⁄44 (248) 3 (76)IN (MM)
A
B
C
D E
PARTS & ACCESSORIES
302 ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • cULus listed • 5 Year limited warranty
Power Size • Fixed power size 2, 3, or 4 See selection guide for details
Body Material • Cast aluminum alloy, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed valve • Latching speed valve
Cover • Plastic pinion cap, painted finish
Handing • Non-handed
Opening • 180° maximum
Mounting • Tri-pack: regular1, top jamb1 or parallel arm2 (1) Arm installation allows 15% power adjustment(2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts – available
Available Arms
• Forearm replacement
Finish AL–Aluminum, paintedOther finishes available by special order
300 SERIESDOOR CLOSER
03.044ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-03.
302-FARMReplacement forearm for 302/303 door closer.
325Parallel arm conversion kit. Not recommended for 302 model.
SNB1420 Sex nuts & thru-bolt (4) for doors 133⁄44" (44.5 mm) thick.
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
302 255–100 (25–45)
36 (914)
— — — AL 10
303 385–140 (38–63)
42 (1067)
— — — AL 10
304 4125–190 (57–86)
48(1219)
42(1067)
— — AL 10
CAUTION: ANY DOOR CLOSER INSTALLED AND ADJUSTED BASED ON ADA REDUCED FORCE REQUIREMENTS MAY NOT RELIABLY CLOSE AND LATCH DOOR. (1) DOOR WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E
302 / 303 / 30433⁄44
(19)633 ⁄88
(162)199 ⁄1616 (39)
711 ⁄1616 (180)
299 ⁄1616 (65)
IN (MM)
A
B
C
D E
PARTS & ACCESSORIES
03.044 D8DIVISION8 300 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, D8DIVISION8 - REV.2021-03.
TC603 ALMODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
Certifications • cULus listed • 1 Year limited warranty
Power Size • Fixed power size 3
Body Material • Low profile• Cast aluminum alloy, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed valve • Latching speed valve
Cover • Aluminum cover plate• Plastic pinion cap, painted finish
Handing • Non-handed
Opening • 150° maximum
Mounting • Regular1 or top jamb1 • Parallel arm2 bracket – available(1) Arm installation allows 15% power adjustment (2) May reduce spring power efficiency by 25%
Hardware • Wood screws & self-tapping machine screws • Sex nuts & thru-bolts – available
Available Arms
• Sliding arm
Finish AL–Aluminum; MB–Matte blackOther finishes available by special order
TC603 SERIESDOOR CLOSER
03.046ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-04.
SNB1420 Sex nuts & thru-bolt (4) for doors 133⁄44" (44.5 mm) thick.
MODELPOWER
SIZEWEIGHT
CAPACITY1MAX. DOOR WIDTH2
BACKCHECKDELAYED ACTION
FINISH / CASEINTERIOR EXTERIOR
TC603 355–143 (25–65)
36 (914)
— — — AL, MB 10
CAUTION: INSTALLATION POSITION WILL AFFECT THE FINAL CLOSING FORCE BETWEEN 1 AND 3 - SEE INSTALLATION INSTRUCTIONS FOR DETAILS. (1) DOOR WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E
TC603 1 11⁄22(38)
2 33⁄88(60)
2(51)
7 11⁄88(184)
1 99⁄1616
(39)
IN (MM)
PARTS & ACCESSORIES
03.046 TC603 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-04.
TC603-SASliding arm with hold open. 120° opening. Available aluminum (AL) or matte black (MB)
TC603-PBParallel arm bracket for TC603
D
B
AC
E
3033 ALMODEL FINISH
Certifications • cULus listed• 5 Year limited warranty
Power Size • Fixed power size 3
Body Material • Cast aluminum body, painted finish
Mechanism • Hydraulic rack and pinion operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve• Latching speed adjustment valve
Cover —
Handing • Non-handed
Opening • 105° maximum
Door Type • For interior wood or hollow metal doors over 199⁄1616" (40 mm) thick
• Door must be hung using butt or pivot hinges
Mounting • Installs in to top of door• Can be installed in door frame
Hardware • Wood & machine screws
Arm • Sliding arm, surface mounted, with adjustable hold open
Finish AL–Aluminum, paintedOther finishes available by special order
3000 SERIESCONCEALED DOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12. 03.050
MODELPOWER
SIZEWEIGHT
CAPACITY1 MAX. DOOR WIDTH2 BACKCHECKDELAYED ACTION
FINISH / CASE
3033 388–144(40–65)
41(1050)
— — AL 12
(1) RECOMMENDED DOOR WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) RECOMMENDED MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES)
SELECTION GUIDE
MODEL A B C D E F G H
3033 855⁄88 (219)
911⁄1616 (230)
1077⁄88 (276)
177⁄3232 (31)
277⁄3232
(56)311⁄1616 (77)
1611⁄22 (419)
2077⁄88 (530)
IN (MM)
A
B
C
D
E F
G
H
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-12.03.050 DOREX 3000
Certifications • EN1154 compliant for 500,000 cycles• 5 Year limited warranty
Models • Light duty • Regular duty• Heavy duty See selection guide for details
Body Material • Compact cast steel body, painted finish
Mechanism • Hydraulic, dual spring operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve • Latching speed adjustment valve
Cover —
Handing • Non-handed
Opening • 90° maximum • 105° maximum – available• Mechanical hold open – availableSee selection guide for details
Door Types • Suitable for wood, metal or aluminum framed doors over 133⁄44" (44.5 mm) thick
• Suitable for frame-less tempered glass doors up to 11⁄22" (13 mm) thick (patch fittings sold separately)
Mounting • Universal single, double acting or centre-hung applications
• Fits 133⁄44 x 4" (45 x 102 mm) header sectionsInterchangeable with JACKSON™ door closers
Hardware • Machine and wood screws• Mounting anchors
Arms & Pivots • Side loading top arm• End loading top arm – option• Offset arm and channel –available• 18–57 mm channel depth pivot• 18–20 mm channel depth pivot –option
Finish —
30 RD 90 HOMODEL DUTY OPENING OPTION
HO-HOLD OPEN; NHO-NO HOLD OPEN SEE SELECTION GUIDE FOR DETAILS
30 SERIESCONCEALED OVERHEAD DOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-08. 03.052
SELECTION GUIDE
MODEL A B C D E F G H K M P Q R S T U V
30233⁄44 (70)
1033⁄44 (273)
1111⁄1616 (17.5)
1299⁄1616 (319)
31111⁄1616 (94)
111⁄22 (38)
11⁄22 (12.7) 1133⁄44
(298)133⁄88 (35)
3131⁄3232 (24)
477⁄1616 (113)
111⁄2 2 – 211⁄44 (38 – 57)
0 – 33⁄44 (0 – 19)
811⁄88 (206)
10 (254) 133⁄88
(35)
1717⁄3232 (13)
312121⁄3232 (17)
81111⁄1616 (220)
977⁄1616 (240)
1(25.4)
IN (MM)
A
B
C
E
F
H
PIVOT CENTRE LINE
SPEED CONTROL
PIVOT CENTRE LINE
D
G
U
T
T
S
U
S
A
K M
V
P
R
Q
3010SType “S” side loading arm assembly. Included with model 30.
3010ELType “A” end loading arm for 1" (25.4 mm) deep web. Included with model 31.
3010AMCAnchor set. Included with 30 and 31 models. Not included with 31B model.
3010OC Offset arm and channel.
3010DPBottom pivot set (125 lbs / 56.8 kg max.), 18 – 57 mm channel depth.
3020DP Bottom pivot set (125 lbs / 56.8 kg max.), 18 – 20 mm channel depth. Included with 30 and 31 models. Not included with 31B model.
PARTS & ACCESSORIES
MODEL DESCRIPTIONMAXIMUM OPENING
OPTION1 WEIGHT CAPACITY2
MAXIMUM DOOR SIZE3
CLOSING FORCENm4
30 LD 90 Light duty, bottom pivot, and side loading arm assembly.
90°NHO
225 (100)
30 x 96(732 x 2438)
13–1830 LD 105 105°
30 RD 90 Regular duty, bottom pivot, and side loading arm assembly.
90° NHO, HO
225 (100)
42 x 96(1067 x 2438)
18–2630 RD 105 105°
31 RD 90 Regular duty, 17 mm spindle, bottom pivot, and end loading arm assembly. Available body-only (31B)*
90°NHO, HO
225 (100)
42 x 96(1067 x 2438)
18–2631 RD 105 105°
30 HD 90 Heavy duty, bottom pivot, and side loading arm assembly.
90° NHO, HO 225
(100)48 x 96
(1219 x 2438)26–37
30 HD 105 105°
31 HD 105Heavy duty, 17 mm spindle, bottom pivot, and end loading arm assembly.
105° NHO
(1) NHO–NO HOLD OPEN; HO–HOLD OPEN (2) MAXIMUM DOOR WEIGHT IN POUNDS (KILOGRAMS). (3) MAXIMUM DOOR SIZE W X H IN INCHES (MILLIMETRES). (4) NOMINAL VALUES PROVIDED; MAY VARY WITH INSTALLATION. (*) 31B BODY ONLY MODEL RECOMMENDED FOR FRAME-LESS TEMPERED GLASS DOOR APPLICATIONS. ARM, PIVOT, ANCHORS & MOUNTING HARDWARE NOT INCLUDED.
3010S SIDE LOADING ARM (INCLUDED WITH 30 MODEL)
3010EL END LOADING ARM (INCLUDED WITH 31 MODEL)
3020DP BOTTOM PIVOT(INCLUDED WITH 30/31 MODELS)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-08.03.052 DOREX 30
40 B RD 90 HO – RSMODEL DUTY OPENING OPTION OPTION
HO-HOLD OPEN; NHO-NO HOLD OPEN; RS-REMOVABLE SPINDLE SEE SELECTION GUIDE FOR DETAILS
Certifications • 5 Year limited warranty
Models • Regular duty• Heavy duty See selection guide for details
Body Material • Compact cast steel body, painted finish
Mechanism • Hydraulic, dual spring operation
Fluid • Non-gumming, non-freezing hydraulic fluid
Adjustments • Sweep speed adjustment valve • Latching speed adjustment valve
Cover • Stainless steel cover plate, satin finish
Handing • Non-handed
Opening • 90° maximum • 105° maximum – available• 130° maximum – available• Mechanical hold open – availableSee selection guide for details
Door Type • Suitable for wood, metal or aluminum framed doors over 133⁄44" (44.5 mm) thick
• Suitable for frame-less tempered glass doors up to 11⁄22" (13 mm) thick (patch fittings sold separately)
Mounting • Universal single, double acting or centre-hung applications
• 155⁄88" (41.3 mm) installation depth• Ideal for thin slab installationsInterchangeable with JACKSON door closers
Hardware • Steel floor casing; 155⁄88" (41.3 mm) installation depth
• Required bolts, brackets and screws for casing installation
Finish C32D–Satin stainless steelCOVER PLATE ONLY Other finishes available by special order
40 SERIESCONCEALED FLOOR DOOR CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-10. 03.054
SELECTION GUIDE
MODEL DESCRIPTIONMAXIMUM OPENING
OPTION1 WEIGHT CAPACITY2
MAXIMUM DOOR SIZE3
CLOSING FORCENm4
40 RD 90Regular duty, with bottom arm and top pivot assembly. Stainless steel cover included.
90°HO 225
(100)36 x 96
(914 x 2438)18–2640 RD 105 105°
40 RD 130 130° NHO
40B RD90 -RS Regular duty, body only, with removable 15 mm pivot with 3 mm extension.*
90° HO 225 (100)
36 x 96(914 x 2438)
18–2640B RD130 -RS 130° NHO
40 HD 90Heavy duty, with bottom arm and top pivot assembly. Stainless steel cover included.
90° HO225 (100)
42 x 96(1067 x 2438)
26–3740 HD 105 105° HO
40 HD 130 130° NHO(1) NHO–NO HOLD OPEN; HO–HOLD OPEN (2) MAXIMUM DOOR WEIGHT IN POUNDS (KILOGRAMS). (3) MAXIMUM DOOR SIZE W X H IN INCHES (MILLIMETRES). (4) NOMINAL VALUES PROVIDED; MAY VARY WITH INSTALLATION. (*) RECOMMENDED FOR FRAME-LESS TEMPERED GLASS DOOR APPLICATIONS. CEMENT CASE, COVER & MOUNTING HARDWARE NOT INCLUDED. OTHER PIVOTS SOLD SEPARATELY.
40ESP-3Removable 15 mm pivot, 3 mm extension. Included with #40B.
40ESP-5 Removable 15 mm pivot, 5 mm extension. Dimension K is 55 mm when installed.
40ESP-10Removable 15 mm pivot, 10 mm extension.Dimension K is 60 mm when installed.
40ESP-15 Removable 15 mm pivot, 15 mm extension. Dimension K is 65 mm when installed.
40CPCover plate. #40CPC3: Polished brass #40CPC32D: Satin stainless steel
PARTS & ACCESSORIES
MODEL A B C D E F G H K L M P Q R S T U V W X Y
401211⁄88 (308)
411⁄44 (108)
199⁄1616 (40)
211⁄88 (54)
711⁄44 (184)
2323⁄3232 (18)
233⁄44 (70)
99⁄1616 (15)
13131⁄3232 (50)
133⁄88 (35)
2323⁄3232 (18.5)
133⁄1616
(30)677⁄88
(175)111⁄44 (32)
1515⁄6464 (6)
2525⁄3232 (20)
52929 ⁄3232 (150)
1313⁄1616 (13)
1515⁄1616 (24)
77⁄1616 (11)
655⁄88 (168)
IN (MM)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-10.03.054 DOREX 40
AD E F L
B
K C
T
M
V
R
S
P
G
H
W
Y
X
U
Q
TOP PIVOT
BOTTOM ARM
DOOR TOP PIVOT
DOOR FRAME
FLOORCASE
CONCEALED SPRING CLOSERSSPECIALTY DOOR CLOSERS
CONCEALED SPRING CLOSER PERKO, PERKO-S
• cULus Listed for use on wood fire doors rated up to 30 minutes
• Concealed in door• Suitable for interior doors up to 110 lbs (50 kg) • Fits doors 133⁄88–133⁄44" (35–44.5 mm) thick• Door opening depends on door thickness and hinge size - up to a maximum of 98°• Not recommended for use on doors fitted with concealed hinges• Adjustable spring power• Non-handed• Endurance tested for 500,000 cycles• Available with round or square faceplates
03.056ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, PERKO - REV.2020-01.
OFFICIAL DISTRIBUTOR Available in a variety of finishes – please contact to order or visit www.perkopower.com for details
PERKO -S 32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
CONCEALED SPRING CLOSER – EXTENDED PERKO-L, PERKO-LS
• cULus Listed for use on wood fire doors rated up to 30 minutes
• Concealed in door• Suitable for interior doors up to 110 lbs (50 kg) hung using standard hinges• Fits doors 133⁄88–133⁄44” (35–44.5 mm) thick• Door opening depends on door thickness and hinge size - up to a maximum of 180°• Not recommended for use on doors fitted with concealed hinges• Adjustable spring power• Non-handed• Endurance tested for 500,000 cycles• Available with round or square faceplates
OFFICIAL DISTRIBUTOR Available in a variety of finishes – please contact to order or visit www.perkopower.com for details
PERKO-L
PERKO-LS
PERKO -LS 32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
PERKO
PERKO-S
03.057 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, PERKO - REV.2020-01.
CONCEALED SPRING CLOSERSSPECIALTY DOOR CLOSERS
PERKOMATIC CONCEALED SPRING CLOSER PERKOMATIC
• cULus Listed for use on wood fire doors rated up to 30 minutes
• Concealed in door• Suitable for interior doors up to 165 lbs (75 kg)• Fits doors 133⁄44" (44.5 mm) thick• Door opening depends on installation - up to a maximum of 180°• Not recommended for use on doors fitted with parliament (butterfly), concealed, projecting or
rising butt hinges• Adjustable latching speed• Non-handed• Endurance tested for 500,000 cycles
OFFICIAL DISTRIBUTOR Available in a variety of finishes – please contact to order or visit www.perkopower.com for details
PERKOMATIC C26DMODEL FINISH
PLEASE CONTACT FOR SELECTION HELP
POWERMATIC CONCEALED HYDRAULIC CLOSER POWERMATIC
• cULus Listed for use on wood fire doors rated up to 45 minutes with intumescent mastic; up to 3 hours on metal doors
• Conforms to ANSI/BHMA 156.4 requirements• Conforms to ADA maximum force requirements
• Concealed in door• Suitable for latching and non-latching applications• Suitable for doors up to 175 lbs (80 kg) and 3711⁄22" (950 mm) wide• Fits doors 111⁄44–133⁄44" (32–44.5 mm) thick• Door opening depends on installation - up to a maximum of 105°• Not recommended for use on doors fitted with concealed hinges• Adjustable latching and closing speed• Non-handed• Endurance tested for 500,000 cycles
OFFICIAL DISTRIBUTOR Available in a variety of finishes – please contact to order or visit www.perkopower.com for details
POWERMATIC C26DMODEL FINISH
PLEASE CONTACT FOR SELECTION HELP
Certifications • 1 Year limited warranty
Panel Thickness • 55⁄1616–11⁄22" (8–13 mm)
Max. Door Width
• 39" (1000 mm)
Max. Door Weight
• 220 lbs (100 kg)
Max. Door Height
• For 55⁄1616" (8 mm) glass: 84" (2134 mm)• For 11⁄22" (13 mm) glass: 108" (2743 mm)
Body Material • Machined aluminum
Mechanism • Hydraulic spring
Fluid • All weather hydraulic fluid
Adjustments • Sweep speed adjustment • Latching speed adjustment
Cover • Stainless steel or aluminum* snap-on cover (*) When ordering aluminum (628) finish
Handing • Non-handed
Opening • Double acting • 150° maximum• 90° hold open – option
Mounting • Floor mounting
Hardware • Screws and masonry anchors
Finish 628–Aluminum; 629–Polished stainless steel; 630–Satin stainless steel, 19–Matte black*(*) Special order - may require additional lead time
and/or minimum order quantities
PF100DC – 630MODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
PF100 SERIESHYDRAULIC PATCH FITTING CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-03. 03.060
SELECTION GUIDE
MODEL A B C D E F G
PF100DC 21313⁄1616
(71.5)733⁄1616
(183)199⁄1616 (40)
433⁄88(111)
11⁄22 (12.7)
211⁄88(54)
55⁄1616 to 11⁄22(8 to 12.7)PF100DCHO
IN (MM)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-03. 03.060 PF100DC
A
B
E
GC
D
F
DOOR CLOSER
FLOOR PIVOT
Hold Open MAX
Hold Open MAX
Door closer MAX
Door closer MAX
CLOSINGSPEED
Latch speed from 10°
90°
90°
150°
150°
10°
10°
C LOSING SP EED
CLOSING SPEED
DOOR CLOSERPF100DC / DCHO
MODELWEIGHT
CAPACITY1MAX. DOOR WIDTH2 MAX. DOOR
HEIGHT3 BACKCHECKHOLD OPEN
FINISHINTERIOR EXTERIOR
PF100 DC 220(100)
39(1000)
—84 or 108
(2134 or 2743)
— — 628, 629630,19*PF100 DC HO — •
(1) DOOR WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES) (3) FOR 5/16" (8 MM) GLASS THICKNESS DO NOT EXCEED 84" (2134 MM) (*)SPECIAL ORDER FINISH
PF121Top door patch fitting with extended covers. Available in matching finishes.See 04.400 for other glass patch fittings.
PF120TP1Top pivot, surface mounted. Available in matte black (19) finish.
PF120TP2Top walking pivot. Mortised, with adjustable pivot.
PF100DC-SD3 / PF100DCHO-SD3Complete glass door kit. Includes PF100DC or PF100DCHO with PF121 and PF120TP1 in matching finishes.
Patch Fitting Door LocksSee 01.500 for a complete list of available patch fitting door locks.
Architectural Door PullsSee 06.010 for a complete list of available architectural stainless steel door pulls.
Including: – Mitered door pulls – Ladder type door pulls – Offset door pulls
PARTS & ACCESSORIES
PF251P withPFL001 lever
20R
19R18R
Certifications • 1 Year limited warranty
Panel Thickness • 55⁄1616–11⁄22" (8–13 mm)
Max. Door Width
• 39" (1000 mm)
Max. Door Weight
• 220 lbs (100 kg)
Max. Door Height
• For 55⁄1616" (8 mm) glass: 84" (2134 mm)• For 11⁄22" (13 mm) glass: 108" (2743 mm)
Body Material • Machined aluminum
Mechanism • Hydraulic spring
Fluid • All weather hydraulic fluid
Adjustments • Sweep speed adjustment • Latching speed adjustment
Cover • Stainless steel snap-on cover
Handing • Non-handed
Opening • Double acting • 170° Maximum• 90° Hold open – option
Mounting • Floor mounting
Hardware • Screws and masonry anchors
Finish 630–Satin stainless steel; 19–Matte black*(*) Special order–may require additional lead time
and/or minimum order quantities
PF102 SERIESHYDRAULIC PATCH FITTING CLOSER
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-03. 03.062
PF102DC – 630MODEL FINISH
SEE SELECTION GUIDE FOR DETAILS
SELECTION GUIDE
MODEL A B C D E F G
PF102DC 233⁄44(70)
733⁄1616
(182)12121⁄3232 (42)
477⁄88(124)
11⁄22 (12.7)
255⁄1616
(58)1313⁄3232 to 11⁄22(10 to 13)PF102DCHO
IN (MM)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-03. 03.062 PF102DC
A
B
E
GC
D
F
DOOR CLOSER
FLOOR PIVOT
DOOR CLOSERPF102DC / DCHO
Hold Open MAX
Hold Open MAX
Door closer MAX
Door closer MAX
CLOSINGSPEED
Latch speed from 10°
90°
90°
170°
170°
10°
10°
C LOSING SP EED
CLOSING SPEED
MODELWEIGHT
CAPACITY1MAX. DOOR WIDTH2 MAX. DOOR
HEIGHT3 BACKCHECKHOLD OPEN
FINISHINTERIOR EXTERIOR
PF102 DC 220(100)
39(1000)
—84 or 108
(2134 or 2743)
— —630, 19*
PF102 DC HO — •
(1) DOOR WEIGHT CAPACITY RANGE IN POUNDS (KILOGRAMS) (2) MAXIMUM DOOR WIDTH IN INCHES (MILLIMETRES) (3) FOR 5/16" (8 MM) GLASS THICKNESS DO NOT EXCEED 84" (2134 MM) (*)SPECIAL ORDER FINISH
PF121Top door patch fitting with extended covers. Available in matching finishes.See 04.400 for other glass patch fittings.
PF120TP1Top pivot, surface mounted. Available in matte black (19) finish.
PF120TP2Top walking pivot. Mortised, with adjustable pivot.
Patch Fitting Door LocksSee 01.500 for a complete list of available patch fitting door locks.
Architectural Door PullsSee 06.010 for a complete list of available architectural stainless steel door pulls.
Including: – Mitered door pulls – Ladder type door pulls – Offset door pulls
PARTS & ACCESSORIES
PF251P withPFL001 lever
20R
19R18R
03.072
AUXILIARY DOOR CLOSERDOOR CHECK
DC500 SILENT DOOR CHECK DC500
• For interior doors between 44–77 lbs (20–35 kg)• 10 lbs (4.5 kg) closing force• Non-handed• Silent hydraulic mechanism• Slows closing between 0° and 10°, preventing door slamming• Surface mounted• Includes standard hook for standard applications• Other hooks available (sold separately)
#HH500: high hook for protruding door #LH500: low hook for recessed door
• Mounting hardware included
DC500MODEL
C
D
E
F
C
D
E
F
C
D
E
F
D
A
8
9
10
8 25
10 22
F
EC
B
DOOR
FRAME
DOOR
FRAME
DOOR
FRAME
DOOR
FRAME
FRAME FRAME
DOOR DOOR
STANDARD HOOK FOR STANDARD DOORS
HIGH HOOK FOR PROTRUDING DOORS (HH500)
LOW HOOK FOR RECESSED DOORS (LH500)
MIN MAX
MODEL A B C D E F
DC500 433⁄16 16 (106) 277⁄32 32 (56) 277⁄1616 (62) 233⁄44 (70) 177⁄8 8 (48) 1 (25.4)
HH500* — — 333⁄1616 (81) 233⁄44 (70) 177⁄8 8 (48) 1 (25.4)
LH500* — — 11111⁄16 16 (43.2) 233⁄44 (70) 177⁄8 8 (48) 1 (25.4)IN (MM) (*)LOW AND HIGH HOOKS SOLD SEPARATELY
C
D
E
F
C
D
E
F
C
D
E
F
D
A
8
9
10
8 25
10 22
F
EC
B
LH500Low Hook
HH500High Hook
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-01.
OVERHEAD STOPS & HOLDERSCONCEALED MOUNT
CONCEALED OVERHEAD STOP/HOLDER – HEAVY DUTY ABH-1000
• UL Listed for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
• Concealed mount, heavy duty• For Interior or exterior use on frequent traffic and heavy weight doors• 133⁄44" (44.5 mm) minimum door thickness • Stop, hold-open and friction functions available• Single or Double acting doors• Non-handed• Standard installation from 85° to 110° of opening (5° increments)• Shock absorbing spring provides 3° to 5° cushion before dead-stop
03.100ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, ABH - REV.2021-04.
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-10 22 -32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
ADJUSTABLE CONCEALED OVERHEAD STOP/HOLDER – HEAVY DUTY ABH-1000A
• UL Listed for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
• Concealed mount, heavy duty• For Interior or exterior use on frequent traffic and heavy weight doors• 133⁄44" (44.5 mm) minimum door thickness • Stop, hold-open and friction functions available• Single acting doors only• Non-handed• Degree of opening is field-adjustable after installation from 85° to 110° (5° increments)• Shock absorbing spring provides 3° to 5° cushion before dead-stop
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-10 12 A -32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
03.101 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, ABH - REV.2021-04.
OVERHEAD STOPS AND HOLDERSCONCEALED MOUNT
CONCEALED OVERHEAD STOP/HOLDER - SLIM LINE ABH-1000SL
• UL Listed for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
• Concealed mount, heavy duty• Slim line channel designed for aluminum store front doors• For interior or exterior use on frequent traffic and heavy weight doors• 133⁄44" (44.5 mm) minimum door thickness • Stop and hold-open functions available• Single or Double acting doors• Non-handed• Standard installation from 85° to 110° of opening (5° increments)• Shock absorbing spring provides 3° to 5° cushion before dead-stop
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-10 12 SL -32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
CONCEALED OVERHEAD STOP/HOLDER - MEDIUM DUTY ABH-4000
• UL Listed for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
• Concealed mount, medium duty• For interior or exterior use on moderate traffic and medium weight doors• 133⁄88" (35 mm) minimum door thickness • Stop, hold-open and friction functions available• Single or Double acting doors• Non-handed• Standard installation from 85° to 110° of opening (5° increments)• Shock absorbing spring provides 3° to 5° cushion before dead-stop
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-40 24 -32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
03.102ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, ABH - REV.2021-04.
OVERHEAD STOPS & HOLDERSSURFACE MOUNT
OVERHEAD STOP/HOLDER – HEAVY DUTY ABH-9000
• UL Listed for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
• Surface mount, heavy duty• For Interior or exterior use on frequent traffic and heavy weight doors• Standard fasteners supplied with sex bolts for 133⁄44 – 211⁄44" (44.5 – 57 mm) thick door
(contact for other door thickness)• Stop, hold-open and friction functions available• Single acting doors only• Non-handed• Standard installation from 85° to 110° of opening (5° increments)• Shock absorbing spring provides 3° to 5° cushion before dead-stop
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-90 22 -32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
OVERHEAD STOP/HOLDER – MEDIUM DUTY ABH-4400
• UL Listed for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
• Surface mount, medium duty• For Interior or exterior use on frequent traffic and heavy weight doors• Standard fasteners supplied with sex bolts for 133⁄44 – 177⁄88" (44.5 – 47.6 mm) thick door
(contact for other door thickness)• Stop, hold-open and friction functions available• Single acting doors only• Non-handed• Standard installation from 85° to 110° of opening (5° increments)• Shock absorbing spring provides 3° to 5° cushion before dead-stop
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-44 32 -32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, ABH - REV.2021-04.03.103
OVERHEAD STOPS AND HOLDERSSURFACE MOUNT
ADJUSTABLE OVERHEAD STOP/HOLDER - MEDIUM DUTY ABH-3300A
• UL Listed for use on wood fire doors rated up to 90 minutes and metal fire doors rated up to 3 hours (Stop Function Only)
• Surface mount, medium duty• For Interior or exterior use on moderate traffic and medium weight doors• Standard fasteners supplied with sex bolts for 133⁄44 – 177⁄88" (44.5 – 47.6 mm) thick door
(contact for other door thickness)• Stop, hold-open and friction functions available• Single acting doors only• Non-handed• Degree of opening is field adjustable from 85° to 110° (5° increments)• Shock absorbing spring provides 3° to 5° cushion before dead-stop
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-33 23 A -32DMODEL TYPE FINISH
PLEASE CONTACT FOR SELECTION HELP
DOOR COORDINATORSSURFACE MOUNT
03.200ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-01.
DOOR COORDINATOR – SURFACE MOUNTED DCM, DCFB, DCMB
• UL listed fire door coordinator• Use on paired doors (with or with out astragal) to
allow inactive door to close before active door• Non-handed• Surface mounted• Aluminum extrusion with steel components• Active door holding lever with adjustable tension• Mounting hardware included: machine screws• Anodized aluminum finish (28)
• Filler bars – available• Mounting brackets for other components – available
DCSM 42 28MODEL SIZE FINISH
DCMB4250• Allows other components to be installed
over door coordinator• Use with door frames with a door stop
height of 55⁄88" (16 mm) and a minimum door stop width of 211⁄22" (64 mm)
• Sold individually
SIZE LENGTH USAGE
32 32 (813) For openings 34 – 52" (864 – 1320 mm) or a pair of 24" (610 mm) doors
42 42 (1067) For openings 52 – 72" (1320 – 1829 mm) or a pair of 30" (762 mm) doors
52 52 (1320) For openings 62 – 92" (1575 – 2337 mm) or a pair of 36" (914 mm) doors
60 60 (1524) For openings 70 – 108" (1778 – 2743 mm) or a pair of 42" (1067 mm) doors
IN (MM)
ITEM DIMENSIONS*
DCFB18-28 18 x 155⁄88 x 55⁄88 (457 x 41 x 16)
DCFB32-28 32 x 155⁄88 x 55⁄88 (813 x 41 x 16)
DCFB42-28 42 x 155⁄88 x 55⁄88 (1067 x 41 x 16)IN (MM) (*) LENGTH X WIDTH X HEIGHT
DCMB4750• Allows other components to be installed
over door coordinator• Use with door frames with a door stop
height of 55⁄88" (16 mm) and a door stop width between 77⁄88–211⁄44" (22–57 mm)
• Sold individually
MOUNTING BRACKETS FILLER BARS
DCFB• DCSM coordinators do not always cover entire length of door stop.
Filler bars are used maintain a clean aesthetic look. • Aluminum extrusion, anodized finish (28)
03.201 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV.2020-01.
DOOR COORDINATORSSURFACE MOUNT
GRAVITY DOOR COORDINATOR DCG7, DCG9
• UL listed for fire doors, conforms to ANSI/BHMA 156.3 type 21• For use on paired doors with astragal up to 4" (102 mm) to allow
inactive door to close before active door• Non-handed• Surface mounted • Solid brass, satin chrome finish• Nylon and rubber rollers and strike plate provide quiet and efficient
operation and help protect the doors from damage• Mounting hardware included: machine screws
DCG9 -26DMODEL FINISH
MODEL USAGE
DCG7 Use with paired doors with an active door size (with astragal) ≤ 48" (1290 mm) wide OR paired doors with an inactive door (with astragal) ≤ 40" (1016 mm) wide OR paired doors both with astragals ≤ 34" (864 mm) wide
DCG9 Use with paired doors with active door size (with astragal) > 48" (1290 mm) wide OR paired doors with inactive door with astragal > 40" (1016 mm) wide OR paired doors both with astragals > 34" (864 mm) wide
DOOR COORDINATORSDOOR MULLION
03.210ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-01.
REMOVABLE DOOR MULLION M418NF, M424FR
• Removable steel door mullion for use on standard or fire rated pairs of doors• Provides a solid and secure center point for latching double doors• Requires wide stile doors with a minimum width of 311⁄44" (82.5 mm)• 2 x 3" (50.8 x 76 mm) steel tube, 11⁄88" (3mm) gauge for heavy duty use• Can accommodate door frames up to 96" (2438 mm) high• Lockable, removable or fixed• Accepts standard rim cylinder and includes cylinder mounting hardware
(not included)• Cast steel top and bottom brackets included• Painted aluminum finish• Mounting hardware included: machine screws and floor anchors
• #M418NF for standard paired doors up to 96" (2438 mm) high• #M424FR UL Listed for fire rated paired doors up to 96" (2438 mm) high
and includes longer floor anchors
M418NFMODEL
M418NFTOPBRACKET
BOTTOMBRACKET
ELECTROMAGNETIC DOOR HOLDERSWALL MOUNT
ELECTROMAGNETIC DOOR HOLDER – WALL MOUNT, LOW PROFILE ABH-2400
• cULus listed for smoke barrier or labelled fire doors• 177⁄88" (48 mm) total projection from wall to face of door;
277⁄88" (73 mm) if using included 1" (25.4 mm) armature extension• Tri-voltage units for easy stocking and installation (12V DC, 24V AC/DC, or 120V AC)• Includes 1" (25.4 mm) armature extension• 35 lb. (16 kg) holding force• All metal components – No plastic parts• Outlet box required (not provided)• Armature features a pivot point which each has 360° mobility to help door alignment and
reduce installation time• Positive release button alleviates residual magnetism• Satin aluminum finish – other finishes available• Various armature extension rod lengths available
03.300ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
OFFICIAL DISTRIBUTOR Available in a variety of finishes and options – please contact to order or visit www.abhmfg.com for details
ABH-2400 -28MODEL FINISH
PLEASE CONTACT FOR SELECTION HELP
ELECTROMAGNETIC DOOR HOLDER – SURFACE WALL MOUNT ABH-2510
• cULus listed for smoke barrier or labelled fire doors• 411⁄22" (114 mm) total projection from wall to face of door;
511⁄22" (127 mm) if using included 1" (25.4 mm) armature extension• 24V AC/DC magnetic coil• Includes 1" (25.4 mm) armature extension• 300 lb. (136 kg) holding force• All metal components – No plastic parts• Outlet box required (not included)• Armature features pivot points with 360° mobility to help door alignment and reduce
installation time• Positive release button alleviates residual magnetism• Satin aluminum finish – other finishes available• Various armature extension rod lengths available
OFFICIAL DISTRIBUTOR Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
ABH-2510 -28MODEL FINISH
PLEASE CONTACT FOR SELECTION HELP
03.301 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV.2020-03.
ELECTROMAGNETIC DOOR HOLDERSFLOOR MOUNT
ELECTROMAGNETIC DOOR HOLDER – FLOOR MOUNT, SINGLE ABH-2600
• cULus listed for smoke barrier or labelled fire doors• Tri-voltage units for easy stocking and installation (12V DC, 24V AC/DC, or 120V AC)• Includes 1" (25.4 mm) armature extension• 35 lb. (16 kg) holding force• All metal components – No plastic parts• Outlet box required (not included)• Armature features pivot point with 360° mobility to help door alignment and reduce
installation time• Positive release button alleviates residual magnetism• Satin aluminum finish – other finishes available• Various armature extension rod lengths available
OFFICIAL DISTRIBUTOR Available in a variety of finishes and options – please contact to order or visit www.abhmfg.com for details
ABH-2600 -28MODEL FINISH
PLEASE CONTACT FOR SELECTION HELP
ELECTROMAGNETIC DOOR HOLDER – FLOOR MOUNT, DOUBLE ABH-2700
• cULus listed for smoke barrier or labelled fire doors• Tri-voltage units for easy stocking and installation (12V DC, 24V AC/DC, or 120V AC)• 24V AC/DC magnetic coil• Includes 1" (25.4 mm) armature extension• 35 lb. (16 kg) holding force• All metal components – No plastic parts• Outlet box required (not included)• Armature features two pivot points with 360° mobility to help door alignment and reduce
installation time• Positive release button alleviates residual magnetism• Satin aluminum finish – other finishes available• Various armature extension rod lengths available
OFFICIAL DISTRIBUTOR Available in a variety of finishes and options – please contact to order or visit www.abhmfg.com for details
ABH-2700 -28MODEL FINISH
PLEASE CONTACT FOR SELECTION HELP
COMMERCIAL & RESIDENTIAL HINGES TABLE OF CONTENTS
Door Handing guide .....................................................................................................................................ii Finish Guide ..................................................................................................................................................ii Abbreviation Guide .......................................................................................................................................iii
COMMERCIAL HINGES
DOREX PRO 179, Full Mortise, Ball Bearing ..................................................................................................04.010
DOREX PRO CB179, Full Mortise, Concealed Ball Bearing .............................................................................04.011
DOREX BB1079, Full Mortise, Ball Bearing ....................................................................................................04.016
DOREX PRO 1168, Full Mortise, Heavy Duty Ball Bearing ..............................................................................04.020
DOREX PRO 142, Full Mortise, Plain Bearing .................................................................................................04.030
DOREX PRO B73, Half Surface, Ball Bearing ..................................................................................................04.040
DOREX PRO B77, Half Mortise, Ball Bearing .................................................................................................04.045
DOREX PRO 148, Swing Clear, Ball Bearing ..................................................................................................04.050
DOREX 1265, Reinforcement Hinge .............................................................................................................04.060
Reinforcement & Filler Plates .........................................................................................................................04.065
DOREX 3310, Single Acting Spring Hinge .....................................................................................................04.070
Commercial Spring Hinges ............................................................................................................................04.075
DOREX 1020, Universal Replacement Hinge .................................................................................................04.080
RESIDENTIAL HINGES
Ball Bearing...................................................................................................................................................04.100
Plain Bearing .................................................................................................................................................04.101
Steel Entry ....................................................................................................................................................04.102
Decorative ....................................................................................................................................................04.103
Spring Hinge .................................................................................................................................................04.103
Door Springs .................................................................................................................................................04.104
CONTINUOUS GEARED HINGES
Concealed ....................................................................................................................................................04.200
Half Surface ..................................................................................................................................................04.200
Full Surface ...................................................................................................................................................04.201
PIVOTS
Offset ...........................................................................................................................................................04.300
Center Hung .................................................................................................................................................04.311
Intermediate .................................................................................................................................................04.312
Spring & Gravity Pivots ..................................................................................................................................04.320
PATCH FITTINGS
Glass Doors & Panels.....................................................................................................................................04.400
ASSORTED
Strap, Tee and Back Flap Hinges ....................................................................................................................04.500
Miscellaneous Hinges ....................................................................................................................................04.501
Continuous (Piano) Hinges ............................................................................................................................04.502
SPECIALTY
Invisible Hinges .............................................................................................................................................04.600
Power Transfer Hinges ..................................................................................................................................04.610
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2021-05.i
R20210708
COMMERCIAL & RESIDENTIAL HINGES GENERAL INFORMATION
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-01. ii
PRIME COATED BLACK JAPANNED / LACQ. MATTE BLACK LACQUER ZINC PLATED YELLOW ZINC PLATED
CODE CP C1B, KJ C1D C2G, ZP C2GY, YZ
BHMA* 600 601 693 603
POLISHED BRASS MIRROR POLISHED BRASS SATIN BRASS ANTIQUE BRASS SATIN NICKEL
CODE BP, PB, C3, 3 C3M, 3M C4, 4, SDB AB, C5, 5 SDN, SN, C15, 15
BHMA* 605, 632 633 609, 638 619, 646
ANTIQUE NICKEL MATTE BLACK DARK BRONZE / DURANODIC POLISHED CHROME SATIN CHROME
CODE C15A, 15A C19, 19 BLR, DU, C20D, 20D, C20 C26, 26 SC, C26D, 26D
BHMA* 620, 647 622, 631 393 625, 651 262, 652
POLISHED STAINLESS STEEL SATIN STAINLESS STEEL ALUMINUM PLAIN STEEL, NO FINISH
CODE C32, 32 SS, C32D, 32D AL, C28, 28 PS
BHMA* 629 630 628, 689
ALL FINISHES IMAGES ABOVE ARE PHOTOGRAPHIC OR COLOUR APPROXIMATIONS, DELIVERED PRODUCT MAY VARY. OTHER FINISHES AVAILABLE–PLEASE CONTACT. (*) EQUIVALENT; CODES DIFFER DEPENDING ON BASE MATERIAL
FINISH GUIDE
DOOR HANDING GUIDE
LEFT HAND (LH)
LEFT HAND REVERSED (LHR)
RIGHT HAND (RH)
RIGHT HAND REVERSED (RHR)
INTERIOR (INSIDE)INTERIOR (INSIDE)
INTERIOR (INSIDE) INTERIOR (INSIDE)
EXTERIOR (OUTSIDE)
EXTERIOR (OUTSIDE) EXTERIOR (OUTSIDE)
EXTERIOR (OUTSIDE)
COMMERCIAL & RESIDENTIAL HINGES GENERAL INFORMATION
GENERALDIA, ø DiameterKG KilogramsLBS PoundsLH Left handLHR Left hand reversedMAX MaximumMIN MinimumN/A, — Not applicable / Not availableQTY Quantity (usually followed by notes)RH Right handRHR Right hand reversedSQ, SquareWT Weight
/UNIT Number of items per basic unit of sale (bagged or boxed)
/BOX, /BAG Number of UNITS found in an inner carton or bag
/CASE Number of BOXES or UNITS found in an outer (shipping) carton
ABBREVIATION GUIDE
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-01.iii
04.010ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
• Standard weight, full mortise• 5 knuckles, 2 ball bearings• Steel or stainless steel hinge and pin• Conforms to ANSI/BHMA A156.1• ANSI/BHMA A156.7 template hole pattern
• Non-handed• Flat tips with knock-out bottom• Wood and undercut machine
screws included
OPTIONSNRP: Non-removable pin-A: NRP, radius corners: 11⁄44" (6.4 mm)-B: NRP, radius corners: 55⁄3232" (4 mm)
SIZE INCHES MM GAUGE HOLESSCREWS INCLUDED
QTY1
MACHINE WOOD
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 0.123 6 #10-24 x 11⁄22 #9 x 1 3 / 60
44 4 x 4 101.6 x 101.6 0.130 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
454 4 11⁄22 x 4 114.3 x 101.6 0.134 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
4545 4 11⁄22 x 4 11⁄22 114.3 x 114.3 0.134 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
MODEL A B C D E F G H K
179 3535 3 11⁄22(88.9)
3 11⁄22(88.9)
11⁄22(12.7)
2323⁄6464
(9.1)12525⁄6464
(35.4) —1111⁄1616
(17.5)
2323⁄6464
(9.1)
11⁄1616
(1.6)
179 44 4(101.6)
4(101.6)
99⁄1616
(14)
11⁄22(12.7)
1(25.5)
3131⁄3232
(24.6)
33⁄44(19.1)
33⁄88(9.5)
11⁄1616
(1.6)
179 454 4
11⁄22(114.3)
4(101.6)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)
179 4545 4
11⁄22(114.3)
4
11⁄22(114.3)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)
179 55 5(127)
5(127)
55⁄88(15.9)
11⁄22(12.7)
111⁄44(31.8)
13131⁄6464
(37.7)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
55⁄3232
11⁄44
K
179 3535
179 44 / 454 / 4545 / 55
179 C32D 454 NRPMODEL FINISH SIZE OPTION
PRO 179 SERIESBALL BEARING TEMPLATE HINGES
BLR CP C1D C15 C2G C26 C26D C3 C32D1 C5
DARK BRONZEPRIME
COATEDMATTE BLACK
SATIN NICKEL
ZINCPLATED
POLISHED CHROME
SATIN CHROME
POLISHEDBRASS
SATIN STAINLESS
STEEL
ANTIQUE BRASS
OTHER SIZES AND FINISHES AVAILABLE BY SPECIAL ORDER, PLEASE CONTACT FOR DETAILS.(1) ALL SATIN STAINLESS STEEL HINGES (C32D) ARE 18-8 STAINLESS STEEL AND ARE NRP BY DEFAULT.
COMMERCIAL HINGESFULL MORTISE HINGES
PRO 179 BALL BEARING TEMPLATE HINGE
SIZE INCHES MM GAUGE HOLES SCREWS INCLUDED QTY1MACHINE WOOD
454 4 11⁄22 x 4 114.3 x 101.6 0.134 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
MODEL A B C D E F G H K
CB179 454 4
11⁄22(114.3)
4(101.6)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
CB179 C32D 454 NRPMODEL FINISH SIZE OPTION
K
04.011ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
PRO CB179 SERIESCONCEALED BALL BEARING TEMPLATE HINGES
C15 C26D C32D1
SATIN NICKEL
SATINCHROME
SATIN STAINLESS
STEEL
OTHER SIZES AND FINISHES AVAILABLE BY SPECIAL ORDER, PLEASE CONTACT FOR DETAILS.(1) ALL SATIN STAINLESS STEEL HINGES (C32D) ARE 18-8 STAINLESS STEEL AND ARE NRP BY DEFAULT.
• Standard weight, full mortise• 3 knuckles, concealed ball bearing• Steel or stainless steel hinge and pin• Conforms to ANSI/BHMA A156.1• ANSI/BHMA A156.7 template hole pattern
• Non-handed• Flush tips• Wood and undercut machine
screws included
OPTIONSNRP: Non-removable pin
COMMERCIAL HINGESFULL MORTISE HINGES
PRO CB179 CONCEALED BALL BEARING TEMPLATE HINGE
04.011 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, DOREX - REV.2021-05.
04.016ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
• Standard weight, full mortise• 5 knuckles, 2 ball bearings• Steel with steel pin• Conforms to ANSI/BHMA A156.1• ANSI/BHMA A156.7 template hole pattern
• Non-handed• Flat tips with knock-out bottom• Wood and undercut machine
screws included
OPTIONSNRP: Non-removable pin
BB1079 26D 454 NRPMODEL FINISH SIZE OPTION
SIZE INCHES MM GAUGE HOLESSCREWS INCLUDED
QTY1
MACHINE WOOD
454 4 11⁄22 x 4 114.3 x 101.6 0.134 8 #12-24 x 11⁄22 #12 x 1 11⁄44 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
MODEL A B C D E F G H K
BB1079 454 4
11⁄22(114.3)
4(101.6)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
A
B
CK
E
F
E
D
H TYPG TYP
BB1079 SERIESBALL BEARING TEMPLATE HINGES
15 26D
SATIN NICKEL
SATINCHROME
OTHER FINISHES AVAILABLE BY SPECIAL ORDER, PLEASE CONTACT FOR DETAILS.
A
B
CK
E
F
E
D
H TYPG TYP
COMMERCIAL HINGESFULL MORTISE HINGES
BB1079 BALL BEARING TEMPLATE HINGE
04.020ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
• Heavy weight, full mortise• 5 knuckles, 4 ball bearings• Steel or stainless steel hinge and pin• Conforms to ANSI/BHMA A156.1• ANSI/BHMA A156.7 template hole pattern
• Non-handed• Flat tips with knock-out bottom • Non-removable pin (NRP)• Wood screws and undercut machine
screws included
OPTIONSB: Radius corners: 55⁄3232"(4 mm)
1168 C32D 454 BMODEL FINISH SIZE OPTION
K
SIZE INCHES MM GAUGE HOLESSCREWS INCLUDED
QTY1
MACHINE WOOD
454 4 11⁄22 x 4 114.3 x 101.6 0.1875 8 #12-24 x 11⁄22 #12 x 1 11⁄44 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
MODEL A B C D E F G H K
1168 454 4
11⁄22(114.3)
4(101.6)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
55⁄3232
PRO 1168 SERIESHEAVY DUTY BALL BEARING TEMPLATE HINGES
C15 C32D
SATIN NICKEL
SATIN STAINLESS
STEEL
OTHER SIZES AND FINISHES AVAILABLE BY SPECIAL ORDER, PLEASE CONTACT FOR DETAILS.
• Standard weight, full mortise• 5 knuckles, plain bearing• Steel with non-rising steel pin• ANSI/BHMA A156.7 template hole pattern
• Non-handed• Flat tips with knock-out bottom• Wood and undercut machine screws included
142 C15 454 NRPMODEL FINISH SIZE OPTION
K
MODEL A B C D E F G H K
142 3535 3 11⁄22(88.9)
3 11⁄22(88.9)
11⁄22(12.7)
2323⁄6464
(9.1)12525⁄6464
(35.4) —1111⁄1616
(17.5)
2323⁄6464
(9.1)
11⁄1616
(1.6)
142 44 4(101.6)
4(101.6)
99⁄1616
(14)
11⁄22(12.7)
1(25.5)
3131⁄3232
(24.6)
33⁄44(19.1)
33⁄88(9.5)
11⁄1616
(1.6)
142 454 4
11⁄22(114.3)
4(101.6)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
SIZE INCHES MM GAUGE HOLESSCREWS INCLUDED
QTY1
MACHINE WOOD
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 0.125 6 #10-24 x 11⁄22 #9 x 1 3 / 60
44 4 x 4 101.6 x 101.6 0.125 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
454 4 11⁄22 x 4 114.3 x 101.6 0.134 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
04.030ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
PRO 142PLAIN BEARING TEMPLATE HINGE
C15 C3M C4
SATIN NICKEL
MIRRORPOLISH BRASS
SATINBRASS
OTHER SIZES AND FINISHES AVAILABLE BY SPECIAL ORDER, PLEASE CONTACT FOR DETAILS.
COMMERCIAL HINGESFULL MORTISE HINGES
PRO 1168 HEAVY DUTY BALL BEARING TEMPLATE HINGE
04.020 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, DOREX - REV.2021-05.
• Standard weight, full mortise• 5 knuckles, plain bearing• Steel with non-rising steel pin• ANSI/BHMA A156.7 template hole pattern
• Non-handed• Flat tips with knock-out bottom• Wood and undercut machine screws included
142 C15 454 NRPMODEL FINISH SIZE OPTION
K
MODEL A B C D E F G H K
142 3535 3 11⁄22(88.9)
3 11⁄22(88.9)
11⁄22(12.7)
2323⁄6464
(9.1)12525⁄6464
(35.4) —1111⁄1616
(17.5)
2323⁄6464
(9.1)
11⁄1616
(1.6)
142 44 4(101.6)
4(101.6)
99⁄1616
(14)
11⁄22(12.7)
1(25.5)
3131⁄3232
(24.6)
33⁄44(19.1)
33⁄88(9.5)
11⁄1616
(1.6)
142 454 4
11⁄22(114.3)
4(101.6)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
SIZE INCHES MM GAUGE HOLESSCREWS INCLUDED
QTY1
MACHINE WOOD
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 0.125 6 #10-24 x 11⁄22 #9 x 1 3 / 60
44 4 x 4 101.6 x 101.6 0.125 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
454 4 11⁄22 x 4 114.3 x 101.6 0.134 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
04.030ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
PRO 142PLAIN BEARING TEMPLATE HINGE
C15 C3M C4
SATIN NICKEL
MIRRORPOLISH BRASS
SATINBRASS
OTHER SIZES AND FINISHES AVAILABLE BY SPECIAL ORDER, PLEASE CONTACT FOR DETAILS.
COMMERCIAL HINGESFULL MORTISE HINGES
PRO 142 PLAIN BEARING TEMPLATE HINGE
• Standard weight, half surface• 5 knuckles, 2 ball bearings• Steel with steel pin • ANSI/BHMA A156.7 template hole pattern
• Handed• Flat tips with knock-out bottom• Non-removable pin (NRP)• High quality primer coat fi nish (CP)
142 CP NRP – LMODEL FINISH HAND
–L : LEFT HAND –R : RIGHT HAND
MODEL A B C D E F G H K L M P Q
B73 4 11⁄22(114.3)
2(52.4)
111⁄22(38)
99⁄1616
(14.2)
11⁄22(12.7)
133⁄44(44.5)
155⁄88(41)
99⁄1616
(14.3)
3333⁄6464
(13)111⁄88
(28.6)11515⁄1616
(31.4)
33⁄88(9.5)
1(25.4)
IN(MM)
DOOR
BC
JAM
B
D LEFT HAND SHOWN
A M
L
L
K
PQ
CB
F
F
E
HG
DOOR JAMB
04.040ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
PRO B73 SERIESHALF SURFACE TEMPLATE HINGE
MODELHINGE SIZE
GAUGE HOLESBOLT / SCREWS INCLUDED
QTY1
INCHES MM BOLT WOOD
B73 4 11⁄22 114.3 0.134 7 #12 x 2 (x3)* #12 x 111⁄4 4 (x4) 3 / 60
(*) FOR DOORS 133⁄44" (45 MM) THICK (1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
COMMERCIAL HINGESHALF SURFACE HINGES
PRO B73 HALF SURFACE TEMPLATE HINGE
04.045ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-07.
• Standard weight, half mortise• 5 knuckles, 2 ball bearings• Steel with steel pin • ANSI/BHMA A156.7 template hole pattern
• Handed• Flat tips with knock-out bottom• Non-removable pin (NRP)• High quality primer coat fi nish (CP)
B77 CP NRP – LMODEL FINISH HAND
–L : LEFT HAND –R : RIGHT HAND
MODEL A B C D E F G H K L M P Q
B77 4 11⁄22(114.3)
255⁄88(66.7)
2(52.4)
99⁄1616
(14.2)
11⁄22(12.7)
133⁄44(44.5)
1(25.4) —
3333⁄6464
(13)
33⁄88(9.5)
111⁄88(28.6)
11515⁄6464
(31.4)1
(25.4)
IN (MM)
DO
OR
BC
JAMB
DLEFT HAND SHOWN
A
B C
F
F
GQ
L
M
P
M
K E
DOOR JAMB
PRO B77 SERIESHALF MORTISE TEMPLATE HINGE
MODELHINGE SIZE
GAUGE HOLESSCREWS INCLUDED
QTY1
INCHES MM MACHINE WOOD
B73 4 11⁄22 114.3 0.134 7 #12-24 x 11⁄2 2 (x3) #12 x 111⁄4 4 (x4) 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
COMMERCIAL HINGESHALF MORTISE HINGES
PRO B77 HALF MORTISE TEMPLATE HINGE
04.045 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, DOREX - REV.2021-07.
04.050ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
• Standard weight• 5 knuckles, 2 ball bearings• Steel with non-rising steel pin • ANSI/BHMA A156.7 template hole pattern
• Allows door to fully clear door opening• For non-bevelled (square) doors • Handed, fi eld reversible• Flat tips with knock-out bottom
148 C15 454 – LMODEL FINISH SIZE HAND
–L : LEFT HAND –R : RIGHT HAND
MODEL A B C D E F G H K
148 454 4 11⁄22(114.3)
155⁄88(41.3)
1919⁄3232
(15.2)
11⁄22(12.9)
111⁄88(28.6)
11515⁄6464
(31.3)
33⁄88(9.5)
1(25.4)
11⁄1616
(1.6)
IN(MM)
DO
OR
B
C
LEFT HAND SHOWN
A
DOOR
FRAME
K
GH
D
E
F
E
PRO 148 SERIESSWING CLEAR TEMPLATE HINGES
SIZE INCHES MM GAUGE HOLESSCREWS INCLUDED
QTY1
MACHINE WOOD
454 4 11⁄22 x 4 114.3 x 101.6 0.134 8 #12-24 x 11⁄22 #12 x 111⁄44 3 / 30
(1) 3/ 30 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.OTHER FINISHES AVAILABLE BY SPECIAL ORDER, PLEASE CONTACT FOR DETAILS.
COMMERCIAL HINGESSWING CLEAR HINGES
PRO 148 SWING CLEAR TEMPLATE HINGE
04.045ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-07.
• Standard weight, half mortise• 5 knuckles, 2 ball bearings• Steel with steel pin • ANSI/BHMA A156.7 template hole pattern
• Handed• Flat tips with knock-out bottom• Non-removable pin (NRP)• High quality primer coat fi nish (CP)
B77 CP NRP – LMODEL FINISH HAND
–L : LEFT HAND –R : RIGHT HAND
MODEL A B C D E F G H K L M P Q
B77 4 11⁄22(114.3)
255⁄88(66.7)
2(52.4)
99⁄1616
(14.2)
11⁄22(12.7)
133⁄44(44.5)
1(25.4) —
3333⁄6464
(13)
33⁄88(9.5)
111⁄88(28.6)
11515⁄6464
(31.4)1
(25.4)
IN (MM)
DO
OR
BC
JAMB
DLEFT HAND SHOWN
A
B C
F
F
GQ
L
M
P
M
K E
DOOR JAMB
PRO B77 SERIESHALF MORTISE TEMPLATE HINGE
MODELHINGE SIZE
GAUGE HOLESSCREWS INCLUDED
QTY1
INCHES MM MACHINE WOOD
B73 4 11⁄22 114.3 0.134 7 #12-24 x 11⁄2 2 (x3) #12 x 111⁄4 4 (x4) 3 / 60
(1) 3/ 60 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
04.060ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
• Heavy weight, full surface• 2 knuckles, 1 ball bearings• Steel with fi xed pin
• Reinforces sagging or unevenly hung doors• Handed• Wood and machine screws included
1265 RHMODEL HAND
LH : LEFT HAND RH : RIGHT HAND
MODEL A B C D E F G H K M P
12653 11⁄44
(82.5)111⁄22
(38.1)
2323⁄3232
(18.1)4 11⁄44
(108)155⁄3232
(29.1)
11⁄22(12.7)
111⁄88(28.6)
2 33⁄8860.30
3(76.2)
11⁄22(12.7)
55⁄88(16)
IN(MM)
M
M
K
L
L
P
MODEL HINGE SIZE FINISH HOLES SCREWS INCLUDED QTY1INCHES MM WOOD MACHINE
1265 311⁄44 x 6 11⁄88 82.6 x 155.7 Satin zinc plated 9 #12-24 x 11⁄22 #12 x 111⁄44 1 / 30
(1) 1/ 30 : QUANTITY PER BOX / QUANTITY PER CASE.
PRO 1265 SERIESREINFORCEMENT HINGES
COMMERCIAL HINGESREINFORCEMENT HINGES & PLATES
PRO 1265 REINFORCEMENT HINGE
COMMERCIAL HINGESREINFORCEMENT & FILLER PLATES
REINFORCEMENT & FILLER PLATES
04.065ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
PRO SERIESREINFORCEMENT & FILLER PLATES
MODEL FINISH DESCRIPTION QTY1
9510 Zinc plated8 x 133⁄1616" (201 x 30 mm) Template reinforcement plate for 411⁄22 (114.3) hinge, with 33⁄3232 (2.5) offset
12 / 120
9511 Zinc plated8 x 133⁄1616" (201 x 30 mm) Template reinforcement plate for 411⁄22" (114.3 mm) hinge, with 11⁄1616" (1.2 mm) offset
12 / 120
9512 Zinc plated8 x 133⁄1616" (201 x 30 mm) Template reinforcement plate for 411⁄22" (114.3 mm) hinge, flat, no offset
12 / 120
(1) 12/120 : QUANTITY PER BOX / QUANTITY PER CASE.
MODEL FINISH DESCRIPTION QTY1
9515 EXW White epoxyTemplate filler plate for 411⁄22 x 111⁄22" (114.3 x 38 mm) hinge leaf 50 / 150
9515 ZP Zinc plated
(1) 50/150 : QUANTITY PER BOX / QUANTITY PER CASE.
9510 9511
9512
• Steel reinforcement plate• ANSI/BHMA A156.7 template hole pattern• Available with various offsets• Holes accommodate #12-24 screws• Fastening hardware NOT included
• Steel fi ller plate• ANSI/BHMA A156.7 template hole pattern• Holes accommodate #12-24 screws• Fastening hardware included
9515
9510 / 9511 / 9512
9515
K
K
MODEL A B C D E F G H K
9510 71515⁄1616
(202)133⁄1616
(30)111⁄88
(28.6)
1717⁄6464
(6.7)
1717⁄3232
(13.5)11515⁄6464
(31)
55⁄88(15)
33⁄3232
(2.5)
55⁄3232
(4)
9511 71515⁄1616
(202)133⁄1616
(30)111⁄88
(28.6)
1717⁄6464
(6.7)
1717⁄3232
(13.5)11515⁄6464
(31)
55⁄88(15)
11⁄1616
(1.2)
55⁄3232
(4)
9512 71515⁄1616
(202)133⁄1616
(30)111⁄88
(28.6)
1717⁄6464
(6.7)
1717⁄3232
(13.5)11515⁄6464
(31)
55⁄88(15) —
55⁄3232
(4)
9515 4 11⁄22(114.3)
111⁄22(38.1)
111⁄88(28.6)
33⁄88(9.5)
3333⁄6464
(13.1)11515⁄6464
(31)1
(25.4) —55⁄3232
(4)
DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
04.065 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, DOREX - REV.2021-05.
• Standard weight, full mortise• 3 knuckle, 2 anti-friction nylon bearings• Steel with steel components• ANSI/BHMA A156.7 template hole pattern• cULus listed *
• Non-handed• Adjustable spring tension (tool included)• Wood and/or undercut machine screws
included
OPTIONS3311: Radius corners: 11⁄44" (6.4 mm)
NOTE: For best results, use with DOREX PRO ball bearing hinges of the same size.
(*) Minimum of two (2) 3310 hinges per fi re-rated door
3310 C15 454MODEL FINISH SIZE
SIZE INCHES MM GAUGE HOLES SCREWS INCLUDED QTY1MACHINE WOOD
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 0.125 6 — #9 x 33⁄44 2 / 40
44 4 x 4 101.6 x 101.6 0.125 8 — #9 x 33⁄44 2 / 40
44 4 x 4 (RC) 101.6 x 101.6 (RC) 0.125 8 — #10 x 33⁄44 2 / 40
454 4 11⁄22 x 4 114.3 x 101.6 0.134 8 #12-24 x 11⁄22 #12 x 111⁄44 2 / 40
(1) 2/ 40 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY. (RC) RADIUS CORNERS
SIZEMAXIMUMDOOR WT.1
SPRINGHINGES
BUTTHINGES2
3535
50 (22.7 kg) 1 2
70 (31.8 kg) 2 1
90 (40.9) 3 —
44
60 (27.2) 1 2
85 (38.6) 2 1
100 (45.5) 3 —
454
70 (31.8) 1 2
90 (40.9) 2 1
120 (54.5) 3 —
(1) LB(KG) MAXIMUM SIZE: 48 X 90" (1219 X 2286 MM). MAX. FIRE DOOR SIZE: 36 X 84" (914 X 2134 MM).
(2) FOR BEST RESULTS, USE DOREX PRO 179 HINGES.
MODEL A B C D E F G H K
3310 3535 3 11⁄22(88.9)
3 11⁄22(88.9)
11⁄22(12.7)
2323⁄6464
(9.1)12525⁄6464
(35.4) —1111⁄1616
(17.5)
2323⁄6464
(9.1)
11⁄1616
(1.6)
3310/11 44 4(101.6)
4(101.6)
99⁄1616
(14)
11⁄22(12.7)
1(25.5)
3131⁄3232
(24.6)
33⁄44(19.1)
33⁄88(9.5)
11⁄1616
(1.6)
3310 454 4
11⁄22(114.3)
4(101.6)
1919⁄3232
(15.2)
11⁄22(12.7)
111⁄88(28.6)
11515⁄6464
(31)1
(25.4)
33⁄88(9.5)
11⁄1616
(1.6)DIMENSIONS IN INCHES (MILLIMETRES) AS PER ANSI A156.7
11⁄44
SIZE 3535
SIZE 44 / 454
A
A
B
B
C
D D
E
E
E
E
F
G TYP H TYP H TYP
IJ
G TYP
PRO 3310 SERIESSINGLE ACTING TEMPLATE SPRING HINGES
04.070ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
C15 C26D C3 C3M C5
SATIN NICKEL
SATIN CHROME
POLISHEDBRASS
MIRRORPOLISHBRASS
ANTIQUE BRASS
OTHER FINISHES AVAILABLE, MAY REQUIRE SPECIAL ORDER AND/OR ADDITIONAL LEAD TIME.
COMMERCIAL HINGESSPRING HINGES
PRO 3310 SINGLE ACTION SPRING HINGES
BOMMERCOMMERCIAL SPRING HINGES
• BHMA Certifi ed, Grade 1• ANSI/BHMA A156.7 template hole pattern• cULus listed for fi re door application
• Non-handed• Steel with steel components• Self-lubricating bearings• Adjustable spring tension• Aligns with full mortise BOMMER hinges of
the same size
OPTIONS4311: Radius corners 11⁄44" (6.4 mm)4312: Radius corners 55⁄88" (15 mm)4361: 55⁄88" Radius / Square corners
(non-template hinge)
Minimum 2 hinges per door.
Available in a variety of architectural finishes, models and sizes – please contact to order or visit www.bommer.com for details
11⁄44
• Non handed• Steel with steel components• Available with reverse spring• Adjustable spring tension• Large barrel, does not align with standard full mortise hinges
• ANSI/BHMA A156.7 template hole pattern model available• cULus listed models available
4010 Non-Template
4020 ANSI Template
4030 ANSI TemplatecULus Listed
Available in a variety of architectural finishes, models and sizes – please contact to order or visit www.bommer.com for details
• Non handed• Steel with steel components• Adjustable spring tension• Does not align with standard full mortise hinges• Do not use on door with bevelled hinge edge• ANSI/BHMA A156.7 template models available
• Box clamp flanges are NOT ADJUSTABLE, available for fixed door thicknesses only
3029 Full Mortise
3023 Half Surface
3024 Box Clamp
4300 SERIES SINGLE ACTING TEMPLATE SPRING HINGES
4000 SERIES SINGLE ACTING SPRING HINGES
3000 SERIES DOUBLE ACTING SPRING HINGES
4310 C26D 454MODEL FINISH SIZE
55⁄88
CP C10 C15 C15A C2G C26D C3 C32D C4
PRIMECOATED
SATINBRONZE
SATIN NICKEL
ANTIQUE NICKEL
ZINCPLATED
SATIN CHROME
POLISHEDBRASS
SATIN STAINLESS
STEEL
SATINBRASS
OTHER FINISHES AVAILABLE. SOME SIZE/FINISH/OPTION COMBINATIONS MAY REQUIRE SPECIAL ORDER AND/OR ADDITIONAL LEAD TIME.
Available in a variety of architectural finishes, models and sizes – please contact to order or visit www.bommer.com for details
04.075ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, BOMMER - REV.2021-05.
4310 Square Corner
COMMERCIAL HINGESSPRING HINGES
04.075 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, BOMMER - REV.2021-05.
COMMERCIAL HINGESREPLACEMENT HINGES
04.080ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2021-05.
• Non handed• Surface mounted• Anti-friction ball bearings for smooth
pin rotation• Precision machined, extruded aluminum• For aluminum frame doors up to
300 lbs (136 kg)• 11⁄88" (3 mm) Vertical door adjustment• Can accommodate 11⁄88" (3 mm) recessed
doors• Easy installation
INCLUDES(2) Hinges(2) #1020S 11⁄88" (3 mm) shim plates
(matching fi nish)(4) Adhesive cover strips
(matching fi nish)(1) Hex key(12) Tamper resistant fasteners
#1020SC Shim plate pairs available separately.
1020 C28MODEL FINISH
MODEL HINGE SIZE GAUGE HOLES QTY1INCHES MM
1020 3 11⁄44 x 5 82.6 x 127 0.218 6 8 / 32
(1) 8/ 32 : QUANTITY PER INNER CARTON / QUANTITY PER CASE. HINGES SOLD IN PAIRS, NOT SOLD INDIVIDUALLY.
MODEL A B C D E F G H
1020 3 11⁄44(82.6)
5(127)
2(50.8)
1(25.4)
77⁄3232
(5.6)
99⁄1616
(14)1
(25.4)
33⁄44(19)
1020S — 5(127)
2(50.8)
1(25.4)
11⁄88(3.2)
77⁄3232
(5.6)1
(25.4) —
IN (MM)
1020 SERIESUNIVERSAL REPLACEMENT HINGE
1020SSHIM
C20D C28
DARKBRONZE
ALUMINUM
OTHER FINISHES AVAILABLE, MAY REQUIRE SPECIAL ORDER AND/OR ADDITIONAL LEAD TIME.
UNIVERSAL REPLACEMENT HINGE 1020
RESIDENTIAL HINGESBALL BEARING HINGES
B848 SERIES BALL BEARING HINGES B848
• For wood door and frame applications• Full mortise• 5 knuckles, 2 ball bearings• Steel hinge and pin• Non-rising, removable pin• Sold in boxed pairs• Wood screws included
OPTIONS-A: 11⁄44" Radius corners (3535 only)
SIZE INCHES MM FINISH1 HOLES WOOD SCREWS QTY2
33 3 x 3 76 x 76 C15 6 #8 x 33⁄44 2 / 100
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 C15 6 #8 x 33⁄44 2 / 100
(1) OTHER FINISHES AVAILABLE (2) 2/ 100 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
B848 C15 3535 -AMODEL FINISH SIZE OPTION
B848 C15 33 3 x 3" Square corners
04.100ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-11.
B848 C15 3535 -A 3 11⁄22 x 3 11⁄22" 11⁄44" (6.4 mm) Radius Corners
B848 C15 3535 3 11⁄22 x 3 11⁄22" Square corners
BB2500 SERIES BALL BEARING HINGES BB2589, BB2590
• For wood door and frame applications• Full mortise• 5 knuckles, 2 ball bearings• Steel hinge and pin• Non-rising, removable pin• Sold in boxed pairs• Wood screws included
SIZE INCHES MM FINISH1 HOLES SCREWS / CASE2
33 3 x 3 76.2 x 76.2 C15 6 #9 x 33⁄44 2 / 100
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 C15 6 #9 x 33⁄44 2 / 100
(1) OTHER FINISHES AVAILABLE (2) 2/ 100 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
BB2589 C15 33 PMODEL FINISH SIZE
BB2589 3 11⁄22 x 3 11⁄22" Square Corner
BB2590 3 11⁄22 x 3 11⁄22" 11⁄44" (6.4 mm) Radius Corners
SIZE INCHES MM FINISH1 HOLES SCREWS / CASE2
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 C15, C26D 6 #9 x 33⁄44 2 / 100
(1) OTHER FINISHES AVAILABLE (2) 2/ 100 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
BB2590
BB2589
04.101 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV.2020-11.
RESIDENTIAL HINGESPLAIN BEARING HINGES
2500 SERIES RESIDENTIAL STEEL HINGES 2589, 2590, 2591
• For wood door and frame applications• Full mortise• 5 knuckles, plain bearing• Steel hinge and removable pin• Unassembled hinge by default• Wood screws included• Packaged in bulk
OPTIONSA: Assembled hinge, with screws P: Boxed pair (assembled), with screws
SIZE INCHES MM FINISH1 HOLES SCREWS / CASE2
33 3 x 3 76.2 x 76.2 C15, C19, C2G 6 #9 x 33⁄44 100
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 C15, C2G 6 #9 x 33⁄44 100
44 4 x 4 101.6 x 101.6 C2G 6 #9 x 33⁄44 100
(1) OTHER FINISHES AVAILABLE (2) 50 BOXED PAIRS OR 100 INDIVIDUAL HINGES.
2589 C15 3535 AMODEL FINISH SIZE OPTION*
2589 Square Corner
2590 11⁄44" (6.4 mm) Radius Corners
2591 55⁄88" (16 mm) Radius Corners
BULK ORDERS
Bulk or volume orders are available for original equipment manufacturers (OEM), project builds, and other contractors.
Custom options and non-stock finishes may require additional lead time or minimum quantity orders.
Please contact for details, including options, available sizes and finishes.
Common options include:
• Delivery without screws • Delivery in split packaging• Specific non-stock finish
2589
SIZE INCHES MM FINISH1 HOLES SCREWS / CASE2
33 3 x 3 76.2 x 76.2 C11P, C15, C15A, C19 6 #9 x 33⁄44 100
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 C15, C26, C26D, C2G 6 #9 x 33⁄44 100
(1) OTHER FINISHES AVAILABLE (2) 50 BOXED PAIRS OR 100 INDIVIDUAL HINGES.
2590
SIZE INCHES MM FINISH1 HOLES SCREWS / CASE2
33 3 x 3 76.2 x 76.2C11P, C15, C15A, C19,
C26, C26D, C2G, C36 #9 x 33⁄44 100
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 C15, C19, C26D, C2G 6 #9 x 33⁄44 100
(1) OTHER FINISHES AVAILABLE (2) 50 BOXED PAIRS OR 100 INDIVIDUAL HINGES.
2591
(*) LEAVE BLANK FOR UNASSEMBLED
RESIDENTIAL HINGESPLAIN BEARING HINGES
STAINLESS STEEL HINGES 84
• For wood door and frame applications• Full mortise• 5 knuckles, plain bearing• Stainless steel• Removable pin• Sold in boxed pairs• Wood screws included
SIZE INCHES MM GUAGE FINISH1 HOLES SCREWS QTY2
33 3 x 3 76.2 x 76.2 2.3 C32D 6 #8 x 33⁄44 2 / 100
3535 3 11⁄22 x 3 11⁄22 88.9 x 88.9 2.3 C32D 6 #9 x 1 2 / 60
(1) OTHER FINISHES AVAILABLE (2) 2/100 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
84 C32D 33MODEL FINISH SIZE
04.102ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-11.
LIGHT DUTY DOUBLE ACTING SPRING HINGE 9290
• For light duty residential applications• Non handed• Adjustable spring tension• Does not align with standard full mortise hinges• Do not use on door with bevelled hinge edge• Sold in pairs• Required fasteners included
SIZE A B FINISH DOOR THICKNESS QTY1
33
(76)2 2323⁄3232
(69.4)SDB, SDN
111⁄44(31.8)
2
44
(102)3 2525⁄3232
(95.8)KJ, SDN
111⁄44(31.8)
2
55
(127)4 55⁄88
(117.4)KJ, SDB, SDN
111⁄22(38.1)
2
66
(152)5 99⁄1616
(141.4)KJ, SDB, SDN
177⁄88(48.6)
2
IN (MM) (1) SOLD IN PAIRS. NOT SOLD INDIVIDUALLY.
9290 SDN 3MODEL FINISH SIZE
RESIDENTIAL HINGESASSORTED HINGES
2600 SERIES DECORATIVE HINGES 2698
• For wood door and frame applications• Full mortise• 5 knuckles, plain bearing• Steel hinge and pin• Sold in assembled pairs, boxed• Wood screws included
SIZE INCHES MM FINISH1 HOLES SCREWS / CASE2
33 3 x 3 76.2 x 76.2 C19 6 #9 x 33⁄44 2 / 100
(1) OTHER FINISHES AVAILABLE (2) 2/100 : QUANTITY PER BOX / QUANTITY PER CASE. HINGES NOT SOLD INDIVIDUALLY.
2698 C19 33MODEL FINISH SIZE
2698 55⁄88" (16 mm) Radius Corners Steeple Tip
04.103 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV.2020-11.
A B
HALF SURFACE SCREEN DOOR SPRING HINGE 2930
RESIDENTIAL HINGESSCREEN DOOR SPRINGS
• Non-handed• Steel hinge with loose pin• Half surface (full surface model available)• Available with reversible spring• Adjustable spring tension• Mounting hardware included
04.104ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, BOMMER - REV.2020-03.
FULL SURFACE SCREEN DOOR SPRING HINGE – ADJUSTABLE 2980
• Non-handed• Steel hinge with button tip• Full surface (half surface model available)• Adjustable spring tension• Mounting hardware included
Available in a variety of architectural finishes and models – please contact to order or visit www.bommer.com for details
FULL SURFACE SCREEN DOOR SPRING HINGE 960
• Non-handed• Steel hinge with fixed pin• Full Surface• Fixed spring tension (not adjustable)• Mounting hardware included
960 ZPMODEL FINISH
A
B
MODEL A B FINISH /BOX /CASE
9603
(76)2 2323⁄3232
(69.4)ZP — 200
29604
(102)3 2525⁄3232
(95.8)C2G 2 40
IN (MM)
233⁄4 4 (70)
233⁄4 4 (70)
26161⁄64 64 (75)
233⁄4 4 (70)
2980 C2GMODEL FINISH
Available in a variety of architectural finishes and models – please contact to order or visit www.bommer.com for details
2930 C2GMODEL FINISH
IN (MM)
IN (MM)
RESIDENTIAL HINGESDOOR SPRING
AUXILIARY DOOR SPRING 2430, 2520
• Non-handed• Economical closing device• Adjustable spring tension• Do not apply more than three (3) hole tension• Maximum capacity: 50 lbs (22.7 kg)• Mounting hardware included
Available in a variety of architectural finishes and models – please contact to order or visit www.bommer.com for details
2430 C1BMODEL FINISH
04.105 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV.2020-03.
CONTINUOUS GEARED HINGESFULL CONCEALED / HALF SURFACE
FULL CONCEALED ALUMINUM GEARED HINGES ABH-A110
• cULus fire rated
• Delrin bearings, heavy duty• No door inset, flush mount• 48" (1219 mm) door width maximum• 450 lbs (204 kg) door weight maximum• Undercut Tek screws included
• Power transfer ready model available (PT)• 1000 lbs (454 kg) high capacity model
available for lead lined doors
STANDARD LENGTHSInch: 79 / 83 / 85 / 95 / 120MM: 2006 / 2108 / 2159 / 2413 / 3048
FINISHESB–Black anodizedC–Clear anodizedD–Dark bronze anodized
MODEL A B C D E CAPACITY1
ABH-A1102525⁄3232
(19.8)
2121⁄3232
(9.5)199⁄1616
(39.7)
55⁄1616
(7.9)—
450 (204)
IN(MM) (1) LBS (KG) - HIGH CAPACITY MODEL AVAILABLE
04.200ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, ABH - REV.2020-10.
Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
D
C
A
B
ABH-A110 HD C 095 -PTMODEL TYPE FINISH LENGTH OPTION
HD: HEAVY DUTY LL: HIGH CAPACITY PT: POWER TRANSFER
HALF SURFACE ALUMINUM GEARED HINGES ABH-A530
• cULus fire rated
• Delrin bearings, heavy duty• 33⁄3232" (2.4 mm) door inset• 48" (1219 mm) door width maximum• 450 lbs (204 kg) door weight maximum• Undercut Tek screws and sex-nut
bolts included
STANDARD LENGTHSInch: 79 / 83 / 85 / 95 / 120MM: 2006 / 2108 / 2159 / 2413 / 3048
FINISHESB–Black anodizedC–Clear anodizedD–Dark bronze anodized
MODEL A B C D E1 F CAPACITY2
ABH-A5302525⁄3232
(19.8)
1111⁄1616
(17.5)199⁄1616
(39.7)11111⁄1616
(42.9)
33⁄3232
(2.4)
1313⁄6464
(5.1)450 (204)
IN(MM) (1) DOOR INSET (2) LBS (KG)
Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
A
B
C
F
D
E
ABH-A530 HD C 083MODEL TYPE FINISH LENGTH
04.201
CONTINUOUS GEARED HINGESFULL SURFACE
FULL SURFACE ALUMINUM GEARED HINGES (SWING CLEAR) ABH-A210
• cULus fire rated
• Delrin bearings, heavy duty• Swing clear application• No door inset, flush mount• 48" (1219 mm) door width maximum• 450 lbs (204 kg) door weight maximum• Undercut Tek screws and sex-nut
bolts included
STANDARD LENGTHSInch: 79 / 83 / 85 / 95 / 120MM: 2006 / 2108 / 2159 / 2413 / 3048
FINISHESB–Black anodizedC–Clear anodizedD–Dark bronze anodized
MODEL A B C D E CAPACITY1
ABH-A2102525⁄3232
(19.8)
2929⁄3232
(23)3 55⁄3232
(80.6)155⁄88
(41.3)13535⁄6464
(39.3)450 (204)
(1) LBS (KG) OTHER HIGH CAPACITY MODELS AVAILABLE
Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
B
CD E
A
ABH-A210 HD C 083MODEL TYPE FINISH LENGTH
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, ABH - REV.2020-10.
FULL SURFACE ALUMINUM GEARED HINGES - CENTER PIVOT ABH-A570
• cULus fire rated
• Delrin bearings, heavy duty• For narrow-faced frames• 11⁄1616" (1.6 mm) door inset• 48" (1219 mm) door width maximum• 450 lbs (204 kg) door weight maximum• Undercut Tek screws and sex-nut
bolts included
STANDARD LENGTHSInch: 79 / 83 / 85 / 95 / 120MM: 2006 / 2108 / 2159 / 2413 / 3048
FINISHESB–Black anodizedC–Clear anodizedD–Dark bronze anodized
MODEL A B C D E1 CAPACITY2
ABH-A5702323⁄3232
(18.3)
2323⁄3232
(18.3)
2121⁄3232
(16.7)3 33⁄1616
(81)
11⁄1616
(1.6)450 (204)
IN(MM) (1) DOOR INSET (2) LBS (KG)
Available in a variety of finishes, models, options and lengths – please contact to order or visit www.abhmfg.com for details
C
D
B
E
A
ABH-A570 HD C 083MODEL TYPE FINISH LENGTH
PIVOTSOFFSET
J SERIES 3/4" OFFSET PIVOT SETS J25, J26, J28, J31
• For aluminum door and frame• Handed or non-handed – see chart• Capacity up to 125 lbs (57 kg)• 11⁄88" (3 mm) vertical adjustment range• Aluminum die-cast housing• All-weather acrylic coating• Oilite bronze bushing in frame top unit • Spring loaded pivot in door top unit• Full race ball bearing in door bottom unit• Case-hardened steel stub in frame bottom unit
• Modular design, all set components available individually – see chart
04.300ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-08.
TYPE SET HAND FINISH FRAME TOP
DOOR TOP
DOOR BOTTOM
FRAME BOTTOM
Flush, jamb mount
J2501 RIGHT AL21-452 21-1208 21-1209
21-734
J2502 LEFT AL 21-73811⁄88" Recess, jamb mount
J2601 RIGHT AL21-512 21-1208 21-1209
21-734
J2602 LEFT AL 21-73811⁄88" Recess, non-handed
J2800 — AL 21-512 21-1208 21-1209 21-460
11⁄88" Recess, narrow
J3101 RIGHT AL21-512 21-1208 21-1209
21-1205
J3202 LEFT AL 21-1204
21-45221-512
J25 / J26 / J28 / J31
21-1208
21-1209
21-734
21-460
21-1205
J2501 ALSET FINISH
A
B
E
C
D
F
F
H
G
K
M
04.310
PIVOTSOFFSET
3/4" OFFSET PIVOT SET – JAMB MOUNT ABH-0117.25
• Handed - indicate handing• Maximum door width 42" (1066 mm) - interior doors only • Maximum door load 250 lbs (113 kg)• UL listed for use on 3-hour fire rated doors• Conforms to ANSI C07162/3530A (modified)• Heavy duty bearings• Stainless steel base material• Top pivot (0180), header mount• Bottom pivot (0117.25), jamb mount • Extended spindles available (special order)
• Use with ABH-019 intermediate pivot
Available in a variety finishes, models, and options – please contact to order or visit www.abhmfg.com for details
3/4" OFFSET PIVOT SET ABH-0147
• Handed - indicate handing• Maximum door load 600 lbs (272 kg)• Maximum door width 48" (1219 mm); 36" (914 mm) for exterior doors• UL listed for use on 3-hour fire rated doors• Conforms to ANSI C07162/3530A (modified)• Heavy duty bearings• Stainless steel base material• Top pivot (0180), header mount• Bottom pivot (0147), floor mount
• Use with DOREX 19 intermediate pivot
ABH-0117.25 - 32D - RHMODEL FINISH HAND
LH : LEFT HAND RH : RIGHT HAND
0180
0117.25
ABH-0147 - 32D - RHMODEL FINISH HAND
LH : LEFT HAND RH : RIGHT HAND
0180
0147
Available in a variety finishes, models, and options – please contact to order or visit www.abhmfg.com for details
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, ABH - REV.2020-03.
PIVOTSCENTER HUNG
CENTER HUNG PIVOT SET – JAMB MOUNT ABH-0127
• Non handed• Maximum door load 200 lbs (91 kg)• Maximum door size 42 x 102" (1066 x 2591 mm) – interior doors only• UL listed for use on 3-hour fire rated doors• Conforms to ANSI C071042• Heavy duty bearings• Stainless steel base material• Light duty top pivot (0320), header mount• Bottom pivot (0127), jamb mount • Extended spindles available (special order)
• Can be used with ABH Rescue Stops – please contact
Available in a variety finishes, models, and options – please contact to order or visit www.abhmfg.com for details
CENTER HUNG PIVOT SET ABH-0128
• Non-handed• Maximum door load 250 lbs (113 kg)• Maximum door size 42 x 102” (1066 x 2591 mm) – interior doors only• UL listed for use on 3-hour fire rated doors• Conforms to ANSI C07032/3530 (modified)• Heavy duty bearings• Stainless steel base material• Light duty top pivot (0320), header mount• Bottom pivot (0128), floor mount • Extended spindles available (special order)
• Available with ABH CR4550 Rescue Strike – please contact
ABH-0128 - 32DMODEL FINISH
ABH-0127 - 32DMODEL FINISH
Available in a variety finishes, models, and options – please contact to order or visit www.abhmfg.com for details
0320
0128
0320
0127
04.311ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV.2020-03.
PIVOTSCENTER HUNG
CENTER HUNG PIVOT SET – HEAVY DUTY ABH-0370
• Non-handed• Maximum door load 500 lbs (227 kg)• Maximum door size 44 x 102" (1118 x 2591 mm) – interior doors only• UL listed for use on 3-hour fire rated doors• Conforms to ANSI C07032• Heavy duty bearings• Stainless steel base material• Heavy duty top pivot (0340), header mount• Bottom pivot (0370B), floor mount • Extended spindles available (special order)
• Top and bottom pivots available individually
Available in a variety finishes, models, and options – please contact to order or visit www.abhmfg.com for details
ABH-0370 - 32DMODEL FINISH
0340
0370B
REINFORCEMENT PIVOT – 3/4" OFFSET ABH-0923
• Helps take load off failing top hinge and eliminate door sagging• Surface mounts to the frame header and door face• For 11⁄88" (3 mm) inset door with 33⁄44" (19 mm) offset • Non-handed• Maximum door load 300 lbs (137 kg)• Steel base material
OFFICIAL DISTRIBUTOR Available in a variety finishes, models, and options – please contact to order or visit www.abhmfg.com for details
ABH-0923 - 32DMODEL FINISH
INTERMEDIATE PIVOT – 3/4" OFFSET ABH-019
• Doors ranging from 60" tall should use one intermediate pivot. An additional intermediate pivot should be used for each additional 30" in door height. (ie, 90" tall door should use two intermediate pivots)
• Mortises into side jamb and hinge edge of door • Handed• For use with 33⁄44" (19 mm) offset pivot sets• UL listed for use on 3-hour fire rated doors• Helps maintain door alignment• Heavy duty stainless steel needle bearings• Stainless steel base material
ABH-019 LH -32DMODEL HAND FINISH
LH: LEFT HAND RH: RIGHT HAND
Available in a variety finishes, models, and options – please contact to order or visit www.abhmfg.com for details
04.312 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, ABH - REV.2020-10.
PIVOTSSPRING & GRAVITY PIVOTS
• Non-handed• For doors up to 36" (812 mm) wide, 211⁄22"(64 mm) thick• Maximum door weight: 75 lbs (34 kg)• Cast steel with steel components• Double acting• Self-lubricating bearing• Adjustable spring tension• Flat door bracket for doors not less than 1" (25.4 mm) thick• Flat jamb bracket: 111⁄44" (31.8 mm) wide
• Non handed• Solid brass or steel• No spring, door weight closes door• Double acting• 7412: for doors 177⁄88" (48 mm) thick, 35 lbs (15.9 kg)
7512: for doors 77⁄88–155⁄88" (22–41 mm) thick, 50 lbs (22.7 kg)• Flat jamb bracket: 111⁄44" (31.8 mm) wide
• 90° Hold open model available (#7512H)
7412 Surface Pivot Brass
7512 Surface Pivot Steel
7112 Surface Pivot
7122 Mortise Pivot
Available in a variety of architectural finishes, models and sizes – please contact to order or visit www.bommer.com for details
04.320ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, BOMMER - REV.2020-01.
7100 SERIES ADJUSTABLE SPRING PIVOTS
7400/7500 SERIES GRAVITY PIVOTS
7112 C2GMODEL FINISH
7512 C2GMODEL FINISH
Available in a variety of architectural finishes, models and sizes – please contact to order or visit www.bommer.com for details
• Non handed• Light, medium and heavy duty models available• Double acting• Anti-friction bearing• Maximum door width: 36" (914 mm)• Door thickness: 133⁄88–133⁄44" (35–45 mm)
• 85° Hold open models – available• Jamb mounting brackets #7805 available separately• Trim plates #7811-1 available separately• Top pivot #7890 available separately
7801 Light (35 lbs / 16 kg) Floor Mounted 85° Hold Open
7811 Medium (90 lbs / 41 kg) Floor Mounted 85° Hold Open
7813HD Heavy (150 lbs / 68 kg) Floor Mounted
7800 SERIES HORIZONTAL SPRING PIVOTS
Available in a variety of architectural finishes, models and sizes – please contact to order or visit www.bommer.com for details
7811 C2GMODEL FINISH
PIVOTSSPRING & GRAVITY PIVOTS
7812 Medium (90 lbs / 41 kg) Jamb Mounted 85° Hold Open
7814HD Heavy (150 lbs / 68 kg) Jamb Mounted
7813 Medium (90 lbs / 41 kg) Floor Mounted
04.321 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, BOMMER - REV.2020-01.
PATCH FITTINGSGLASS DOOR & PANELS
04.400ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
A
7 1/2(190)
2 13/16(70)
• Recommended for use with Top Pivot #PF120TP1 or Walking Pivot #PF120TP2
PF120 TOP DOOR PATCH FITTING
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
6 3/8(162)
2(50)
PF120 – 630MODEL FINISH
PF120TP2 Walking Pivot
PF120TP1 Top Pivot
A
• Recommended for use with Top Pivot #PF120TP1 or Walking Pivot #PF120TP2
• Extended covers increase size to match #PF100DC/DCHO Hydraulic Patch Fitting Closer
PF121 TOP DOOR PATCH FITTING - EXTENDED
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
PF121 – 630MODEL FINISH
PF120TP2 Walking Pivot
PF120TP1 Top Pivot
A
• Recommended for use with DOREX 30 Door Closer
PF150 TOP DOOR PATCH FITTING
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
PF150 – 630MODEL FINISH
DOREX 30 SeriesDoor Closer
6 3/8(162)
2(50)
PATCH FITTINGSGLASS DOOR & PANELS
04.401 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
• Recommended for use with Bottom Door Pivot #PF110BP1 or with DOREX 40 Series Concealed Floor Closer
PF110 BOTTOM DOOR PATCH FITTING
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
6 3/8(162)
2(50)
A
DOREX 40 SeriesDoor Closer
PF110BP1Bottom Door Pivot
PF110 – 630MODEL FINISH
4 3/16(106)
4 3/16(106)
2(50)
2(50)
• For use with glass transom & side panel• For single glass door applications
PF160 TRANSOM CORNER PATCH WITH STOP
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
PF160 – 630MODEL FINISH
PATCH FITTINGSGLASS DOORS AND PANELS
• For use with single or double glass transom• For double glass door applications
PF165 TRANSOM CONNECTOR / DOOR STOP
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
4 9/16(116)
2(50)
PF165 – 630MODEL FINISH
04.402ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
04.403 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
PATCH FITTINGSGLASS DOOR & PANELS
4 5/32(105)
8 9/16(217)
2(50)
2(50)
• Recommended for use with Top Door Patch Fitting #PF120
PF140 TRANSOM CORNER PATCH
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
PF120Top Door Patch Fitting
PF140 – 630MODEL FINISH
6 3/8(162)
2(50)
• Recommended for use with Top Door Patch Fitting PF120• Includes regular machine screws & anchors
PF130 WALL MOUNT TRANSOM PATCH WITH PIVOT
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
PF130 – 630MODEL FINISH
7 1/2(190)
2 13/16(70)
• Recommended for use with Door Closer PF100DC or PF102DC and Top Door Patch Fitting PF121
• Includes regular machine screws & anchors
PF131 WALL MOUNT TRANSOM PATCH WITH PIVOT - EXTENDED
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
PF131 – 630MODEL FINISH
PF100DC / PF102DCDoor Closer
PF120Top Door Patch Fitting
PF121Top Door Patch Fitting
PATCH FITTINGSGLASS DOORS AND PANELS
04.404ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
• Includes regular machine screws & anchors
PF163 WALL MOUNT TRANSOM PATCH WITH STOP
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
6 3/8(162)
2(50)
PF163 – 630MODEL FINISH
7 1/2(190)
2 13/16(70)
• Recommended for use with PF100DC, PF102DC Door Closers and Top Door Patch Fitting #PF121
• Includes regular machine screws & anchors
PF164 WALL MOUNT TRANSOM PATCH WITH STOP – EXTENDED
628 629 630 19
ALUMINUMPOLISHED STAINLESS
STEELSATIN STAINLESS
STEELMATTEBLACK
PF164 – 630MODEL FINISH
C
B
A D
E
C
B
A D
E
PF100DC / PF102DCDoor Closer
PF121Top Door Patch Fitting
04.405 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
PATCH FITTINGSGLASS DOOR & PANELS
ASSORTED HINGESSTRAP, TEE & BACK FLAP HINGES
STRAP HINGE 1209
• Heavy duty steel hinge, fixed pin• Counter-sunk holes• Screws not included
MODELHINGE SIZE (L x W)
FINISH HOLESSCREWS NOT INCLUDED
QTY1INCHES MM
1209 4 3 11⁄22 x 4 88.9 x 88.9 ZP 6 #8 2 / 10
1209 6 4 x 6 101.6 x 101.6 ZP 6 #8 2 / 10
(1) 2/ 10 : QUANTITY PER BOX / PAIRS PER CASE. HINGES NOT SOLD INDIVIDUALLY. ZP–ZINC PLATED
1209 ZP 4MODEL FINISH SIZE
04.500ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2021-05.
TEE HINGE 1609
• Heavy duty steel hinge, fixed pin• Counter-sunk holes• Screws not included
MODELHINGE SIZE (L x W)
FINISH HOLESSCREWS NOT INCLUDED
QTY1INCHES MM
1609 4 333⁄88 x 4 86 x 107 ZP 6 #8 2 / 10
1609 6 411⁄22 x 6 113 x 153 ZP 6 #8 2 / 5
(1) 2/ 10 : QUANTITY PER BOX / PAIRS PER CASE. HINGES NOT SOLD INDIVIDUALLY. ZP–ZINC PLATED
1609 ZP 4MODEL FINISH SIZE
BACK FLAP HINGE 1002, 4002, 4012
• Heavy duty steel hinge, fixed or bent loose pin• Counter-sunk holes • Screws not included
MODELHINGE SIZE (L x W)
FINISH HOLESSCREWS NOT INCLUDED
QTY1INCHES MM
1002-114 111⁄44 x 311⁄44 32 x 83 ZP 6 #6 2 / 10
1002-112 111⁄22 x 311⁄22 38 x 89 ZP 6 #7 2 / 10
1002-2 2 x 411⁄22 51 x 114 ZP 6 #8 2 / 10
4002 2 x 411⁄44 51 x 107 PS 6 #8 2 / 10
4012 2 x 411⁄44 51 x 107 PS 6 #8 2 / 10
(1) 2/ 10 : QUANTITY PER BOX / PAIRS PER CASE. HINGES NOT SOLD INDIVIDUALLY. ZP–ZINC PLATED; PS–PLAIN STEEL
1002-114MODEL
4012Bent loose pin
1002-114Fixed pin
04.501 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV.2020-01.
ASSORTED HINGESMISCELLANEOUS HINGES
3-LEAF PANEL HINGES 130
GRAVITY PIVOT HINGE – LIGHT DUTY 3000
130 ST C4MODEL OPTION FINISH
AVAILABLE 50 PAIRS / BOX
• For light weight panels• 311⁄22 x 211⁄44" (89 x 57 mm) steel hinge• Fixed or loose pin• Nylon bearings• Screws NOT included
OPTIONSA: Lose pin, assembledL: Extended 211⁄22" (64 mm) center leafST: Steeple tip
FINISHC15: Satin nickelC2G: Zinc platedC4: Satin brass
3000MODEL
AVAILABLE 10 PAIRS / BOX
• For 33⁄44" (19 mm) or thicker light weight panels• Steel with nylon bearings• Adjustable panel plum• Hold open at 110°• Brass plated
LIFT-HINGE 4570
4570 LMODEL HAND
L–LEFT; R–RIGHT AVAILABLE 10 PAIRS / BOX
• Light duty • 3 x 211⁄44" (76 x 57 mm) steel hinge• Handed• Swagged• Unfinished plain steel• Screws NOT included
130, 130A, 130ST
130L
ASSORTED HINGESCONTINUOUS HINGE
04.502ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-01.
CONTINUOUS HINGES 1116, 114, 112, 2, 3
2AL NHMODEL OPTION
PLEASE CONTACT FOR OPTION/FINISH AVAILABILITY
• Steel hinge with steel pin• Only available in 72" (1829 mm) lengths• Screws are not included
• Stainless steel models available – see chart• Aluminum models available – see chart
OPTIONSNH: No Holes
MODEL MATERIAL SIZE HOLE SPACING
KNUCKLE WIDTH
SCREWS NOT INCLUDED
QTY1OPEN WIDTH
3PS Steel 3 (76) 2 (50.8) 11⁄22 (12.7) N/A* 100
1116ST
Stainless steel
111⁄1616 (27)
2(50.8)
11⁄22 (12.7)
#5 100
114ST 111⁄44 (32) #5 100
112ST 111⁄22 (38) #6 50
2ST 2 (51) #6 50
3ST 3 (76) N/A* 50
112ALAluminum
111⁄22 (38) 2(50.8)
11⁄22 (12.7)
#6 100
2AL 2 (51) #6 50
IN (MM) (*) ONLY AVAILABLE WITHOUT HOLES (1) QUANTITY PER CASE
04.600ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2019-12.
SPECIALTY HINGESINVISIBLE HINGES
INVISIBLE HINGES SOSS
INVISIBLE SPRING HINGE CLOSER SOSS
• Single action spring hinge• For solid wood or hollow core doors 133⁄88 – 2" (35 – 51 mm) thick• Maximum opening: 180°• Hinge cannot be seen or tampered with when closed• Adjustable closing speed after installation by hex key• Can be installed inside door or jamb• Recommend one spring hinge for every 20" (508 mm) height or every 55 lbs (25 kg)• Supporting invisible hinges are required
• Fire rated (UL Listed) models up to 180 minutes available
Available in a wide variety of finishes, models, sizes, and options – please contact to order or visit www.soss.com for details
• For wood or metal applications• Models can accommodate cabinet to full-sized doors• Hinge cannot be seen or tampered with when closed• Zinc body with steel pins• Opens 180°• Smooth operation• All hinges include wood screws; machine screws available (please specify)
• Fire rated (UL Listed) models up to 180 minutes available• Power Transfer models available• Extreme weight or size models available• Surface mounted models for metal cabinets available• Steel door reinforcement plates available
S220PT511⁄22" (140 mm) Power Transfer
S106233⁄88" (60 mm) Rear-mount
S220511⁄22" (140 mm)
S220 FR C26DMODEL OPTION FINISH
PLEASE CONTACT TO ORDER
S220IC C26DMODEL FINISH
PLEASE CONTACT TO ORDER
Available in a wide variety of finishes, sizes, and options – please contact to order or visit www.soss.com for details
04.601 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV.2019-12
SPECIALTY HINGESINVISIBLE HINGES
INVISIBLE BARREL HINGES SOSS
• Not recommended for vertical or load bearing applications - light applications only
• Hinge cannot be seen or tampered with when closed• Easy press-fit installation; additional screw can be used to additional strength on some sizes• Solid brass• Opens to 180°
Available in a variety finishes and sizes – please contact to order or visit www.soss.com for details
SBH124 C4MODEL FINISH
PLEASE CONTACT TO ORDER
04.610ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03
SPECIALTY HINGESPOWER TRANSFER
POWER TRANSFER HINGE – PRE-WIRED ABH-PT200, ABH-PT1000
POWER TRANSFER HINGE ABH-PT105 , AB-PT180
Available in a wide variety of finishes and options – please contact to order or visit www.abhmfg.com for details
• Allows transferring electrical power & data from the frame to the door in a secure and discreet manner.
• Unit mortises into the edges of the door and frame and is completely concealed when the door is in the closed position.
• All metal construction including backboxes - NO PLASTIC PARTS• Ideal for high abuse or heavy traffic situations• UL/ULC Listed for use on fire doors• For doors at least 133⁄44" (45 mm) thick• Maximum door opening: 180°• Not for use with swing clear hinges, pocket pivots, butt hinges larger
than 6”, 111⁄22” offset pivots or center hung doors
• ABH-PT200: (2) 18 AWG Wires (MAX. 24VDC, 5A)• ABH-PT1000: (10) 24 AWG Wires (MAX. 24VDC, 1A)
ABH-PT200 – 28MODEL FINISH
PLEASE CONTACT TO ORDER
Available in a wide variety of finishes and options – please contact to order or visit www.abhmfg.com for details
• Models provide housing for running wires from the frame to the door in a secure and discreet manner
• Stainless steel housing and spring conduit• Spring conduit fits wire bundles up to 55⁄1616" (8 mm) thick• Works with most butt hinges, continuous hinges and
33⁄44" (19 mm) offset pivots• Maximum door opening
» ABH-PT105: 105° » ABH-PT180: 180°
• Available with square or round corners
ABH-PT105 – 32DMODEL FINISH
PLEASE CONTACT TO ORDER
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV. 2020-06
TABLE OF CONTENTS SECURITY HARDWARE
Finish Guide ..................................................................................................................................................ii
Abbreviation Guide .......................................................................................................................................iii
PADLOCKS & ACCESSORIES
GUARD Padlocks ..........................................................................................................................................05.010
Padlocks .......................................................................................................................................................05.020
VIRO Padlocks ..............................................................................................................................................05.040
Specialty Padlocks .........................................................................................................................................05.060
STOREFRONT HARDWARE
DOREX Mortise Locks ...................................................................................................................................05.200
VIRO Mortise Locks ......................................................................................................................................05.210
Door Handles & Paddles ................................................................................................................................05.240
Electric Strikes ...............................................................................................................................................05.260
CYLINDERS
Mortise Cylinders ..........................................................................................................................................05.400
Rim Cylinders ................................................................................................................................................05.410
Cylinder Trim Rings .......................................................................................................................................05.420
Guards & Latch Protectors .............................................................................................................................05.430
Profile Cylinders ............................................................................................................................................05.440
DOOR SECURITY
Door Viewers ................................................................................................................................................05.600
Door Guards & Chains ..................................................................................................................................05.610
Rim Locks .....................................................................................................................................................05.630
Door Protection ............................................................................................................................................05.640
ASSORTED SMALL LOCKS
Cam Locks ....................................................................................................................................................05.700
KEY ACCESSORIES
Key Cabinets.................................................................................................................................................05.800
Key Rings & Tags ..........................................................................................................................................05.810
i
R20210618
SECURITY HARDWARE FINISH GUIDE
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV. 2020-12. ii
ALL FINISHES IMAGES ABOVE ARE PHOTOGRAPHIC OR COLOUR APPROXIMATIONS, DELIVERED PRODUCT MAY VARY. OTHER FINISHES AVAILABLE–PLEASE CONTACT. (*) EQUIVALENT; CODES DIFFER DEPENDING ON BASE MATERIAL
PRIME COATED BLACK JAPANNED / LACQ. MATTE BLACK LACQUER ZINC PLATED YELLOW ZINC PLATED
CODE CP C1B, KJ C1D C2G, ZP C2GY, YZ
BHMA* 600 601 693 603
POLISHED BRASS MIRROR POLISHED BRASS SATIN BRASS ANTIQUE BRASS SATIN BRONZECODE BP, BP032, C3, 3 C3M, 3M C4, 4, SDB AB, C5, 5 C10, 10
BHMA* 605, 632 633 609, 638 639
OIL RUBBED BRONZE POLISHED NICKEL SATIN NICKEL ANTIQUE NICKEL MATTE BLACKCODE C10B, 10B NP, C14, 14 SDN, SN, C15, 15 AN, C15A, 15A C19, 19
BHMA* 640 645 619, 646 620, 647 622, 631
DARK BRONZE POLISHED CHROME SATIN CHROME POLISHED STAINLESS STEEL SATIN STAINLESS STEELCODE BLR, DU, C20D, 20D CHR, C26, 26 SC, C26D, 26D C32, 32 SS, ST, C32D, 32D
BHMA* 383, 393 625, 651 626, 652 629 630
ALUMINUM PLAIN STEEL, NO FINISHCODE AL, C28, 28 PS
BHMA* 628, 689
ALMOND WHITE LIGHT BRONZE EPOXY BLACK EPOXY WHITE SATIN WHITECODE ALMOND, AW BZ EXB EXW WSILK
BHMA*
WHITE BROWN SILVER PAINT GOLD PAINTCODE WH, WHITE B SL GD
BHMA*
PAINTED
SECURITY HARDWARE ABBREVIATION GUIDE
GENERALBS BacksetDIA, ø DiameterKG KilogramsLBS PoundsLH Left handLHR Left hand reversedMAX MaximumMIN MinimumN/A, — Not applicable / Not availableQTY Quantity (usually followed by notes)RH Right handRHR Right hand reversedSQ, SquareWT Weight
/UNIT Number of items per basic unit of sale (bagged or boxed). The default is 1.
/BOX, /BAG Number of UNITS found in an inner carton or bag.
/CASE Number of UNITS found in an outer (shipping) carton.
CURRENTAC Alternating currentDC Direct currentV Volts, voltageA AmperesΩ Ohms
KEYINGCKD Completely knocked downKA Keyed alikeKA2 Keyed alike in pairs KD Keyed differentMK Master keyedSA Sub-assembledUP Unpinned
KEYWAY / CYLINDER TYPEDM DummySC Schlage CWEI, WR WeiserT1 Thumbturn profile 1Y9 Yale #9
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV. 2020-01iii
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
GUARD PADLOCKSSECURITY HARDWARE
E
A
B
C
D
F
MODEL SIZE PINS KEYINGBODY SIZE SHACKLE SIZE
QTY1
A B F C E ø DSINGLE LOCKING
831 20 3 KA, KD33⁄44
(19.4)
33⁄44(20.0)
33⁄88(10.9)
11⁄22(11.5)
33⁄88(9.6)
11⁄88(3.2)
12 / 576
832 25 4 KA, KD1
(25.1)1
(24.3)
11⁄22(11.9)
11⁄22(14.2)
11⁄22(12.6)
11⁄88(4.0)
12 / 324
DOUBLE LOCKING
833 30 4KA, KD,
UP111⁄44
(31.4)111⁄44
(30.3)
11⁄22(13.5)
33⁄44(19.6)
55⁄88(16.7)
11⁄44(5.0)
12 / 216
834* 40 5KA, KD, MK, UP
111⁄22(37.7)
133⁄88(36.5)
55⁄88(15.2)
77⁄88(22.5)
33⁄44(19.5)
11⁄44(6.4)
12 / 96
834 L* 40 5KA, KD,
UP111⁄22
(37.7)133⁄88
(36.5)
55⁄88(15.2)
211⁄22(63.0)
33⁄44(19.5)
11⁄44(6.4)
6 / 96
835 45 5KA, KD,
UP133⁄44
(43.9)155⁄88
(41.4)
55⁄88(17.0)
1(26.5)
77⁄88(22.5)
11⁄44(7.9)
6 / 72
835 L 45 5 KA, KD133⁄44
(43.9)155⁄88
(41.4)
55⁄88(17.0)
211⁄22(63.0)
77⁄88(22.5)
11⁄44(7.9)
6 / 72
836 50 5KA, KD, MK, UP
2(50.3)
133⁄44(45.6)
33⁄44(18.5)
111⁄88(28.0)
1(25.4)
33⁄88(9.5)
6 / 72
836 L 50 5 KA, KD2
(50.3)133⁄44
(45.6)
33⁄44(18.5)
211⁄22(63.0)
1(25.4)
33⁄88(9.5)
6 / 48
IN (MM) (1) 12/600 : UNITS PER BOX / UNITS PER CASE. (*) AVAILABLE WITH CORBIN (A), CISA (C) OR GUARD (V) REVERSE KEYWAYS IMPERIAL MEASUREMENTS ARE FOR REFERENCE ONLY, ROUNDED TO NEAREST 11⁄88"
SOLID BRASS PADLOCKS 800 SERIES
835 L KAMODEL KEYING
05.010
• Solid brass body, sanded finish• Hardened steel shackle, chrome plated• Single or double locking shackle• Long shackle (L) model available• Stainless steel springs• Pick resistant mushroom pins• Brass cylinder with 2 keys
KEYINGKA: Keyed alike KD: Keyed differentKDC: Retail packaging (keyed different)MK: Master keyedUP: UnpinnedEngraving – please contact
*Keying services available
05.011 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-01.
GUARD PADLOCKSSECURITY HARDWARE
E
A
B
C
D
F
• Laminated steel plate body• Hardened steel shackle, chrome plated• Single or double locking shackle• Stainless steel springs• Pick resistant mushroom pins• Brass cylinder with 2 keys
KEYINGKA: Keyed alike KD: Keyed differentKDC: Retail packaging (keyed different)
*Keying services available
LAMINATED PADLOCKS 700 SERIES
MODEL SIZE PINS KEYINGBODY SIZE SHACKLE SIZE
QTY1
A B F C E ø DSINGLE LOCKING
730 30 3 KA, KD13131⁄⁄3232
(50.0)199⁄⁄1616
(40.0)
1111⁄1616
(17.5)133⁄⁄3232
(27.5)155⁄⁄3232
(29.5)
1111⁄1616
(17.5)12 / 216
DOUBLE LOCKING
740 40 5 KA, KD233⁄⁄88
(60.0)11313⁄⁄1616
(46.0)
77⁄⁄88(20.5)
11515⁄⁄3232
(37.5)133⁄⁄88
(35.0)
77⁄88(20.5)
12 / 96
744 45 5 KA, KD199⁄⁄1616
(40.0)155⁄⁄1616
(33.0)
2121⁄3232
(16.5)
2929⁄⁄3232
(23.0)
1515⁄⁄1616
(24.0)
2121⁄3232
(16.5)12 / 96
750 50 5 KA, KD13131⁄⁄3232
(50.0)199⁄⁄1616
(40.0)
1111⁄1616
(17.5)133⁄⁄3232
(27.5)155⁄⁄3232
(29.5)
1111⁄1616
(17.5)6 / 72
IN (MM) (1) 12/216 : UNITS PER BOX / UNITS PER CASE. IMPERIAL MEASUREMENTS ARE FOR REFERENCE ONLY, ROUNDED TO NEAREST 11⁄88"
740 KDMODEL KEYING
E
A
B
C
D
F
• Solid brass body, chrome finish• Stainless steel shackle• Double locking long shackle• Stainless steel springs• Pick resistant mushroom pins• Includes 2 keys
KEYINGKA: Keyed alike KD: Keyed different
*Keying services available
MARINE PADLOCKS – LONG SHACKLE 936L
MODEL SIZE PINS KEYINGBODY SIZE SHACKLE SIZE
QTY1
A B F C E ø DDOUBLE LOCKING
936L 50 5 KD2
(49.9)15⁄8
(40.2)
5⁄8(16.8)
31⁄2(88.0)
11⁄8(29.0)
1⁄4(7.9)
6 / 48
IN (MM) (1) 6/48 : UNITS PER BOX / UNITS PER CASE. IMPERIAL MEASUREMENTS ARE FOR REFERENCE ONLY, ROUNDED TO NEAREST 11⁄88"
963L KDMODEL KEYING
05.012ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
GUARD PADLOCKSSECURITY HARDWARE
PADLOCK KEYING PARTS
KB
BP TP SP EP
MP
BP 833 -1PART SPECIFICATION PIN #
PARTSBP: Bottom pinMP: Master pinTP: Top pinSP: SpringEP: End plug
SPECIFICATION832: 832 padlock833: 833 padlock834-35: 834/35 padlock836: padlock
PIN #-1: Pin #1-2: Pin #2-3: Pin #3-4: Pin #4-5: Pin #5
KB 834-35 AKEY SPECIFICATION KEYWAY
KEYKB: Key blankMK: Master key
SPECIFICATION730: 730 padlock740: 740 padlock744-50: 740/750 padlock831: 831 padlock832: 832 padlock833: 833 padlock834-35: 834/35 padlock836: padlock
KEYWAY*A: CorbinC: CisaV: Guard (reverse)
* Optional keyways ONLY available for 834 or 834L padlocks.
• Solid brass body, polished finish• Hardened steel shackle, nickel plated• Single or double locking shackle• Long shackle (L) models available• Re-keyable cylinder with 3 keys
KEYINGKD: Keyed alike
*Keying services available
MODEL SIZE PIN KEYINGBODY SIZE SHACKLE SIZE
KEY1 / BOXA B F C E ø D
SINGLE LOCKING
261 20 3 KD133⁄1616
(20.6)255⁄3232
(19.5)133⁄3232
(10.4)133⁄3232
(10.5)133⁄3232
(10.7)
11⁄88(3.2)
KB261 12
262 25 4 KD311⁄3232
(24.9)311⁄3232
(24.8)155⁄3232
(12.1)311⁄3232
(24.8)
11⁄22(12.5)
33⁄1616
(4.4)KB262 6
DOUBLE LOCKING
263 32 4 KD111⁄44
(31.6)133⁄1616
(30.0)
99⁄1616
(13.9)133⁄1616
(30.0)
2121⁄3232
(16.8)
77⁄3232
(5.4)KB263 6
263L 32 5 KD111⁄44
(31.6)133⁄1616
(30.0)
99⁄1616
(13.9)133⁄1616
(30.0)
2121⁄3232
(16.8)
77⁄3232
(5.4)KB263 6
264 38 5 KD111⁄22
(37.8)133⁄88
(35.0)
55⁄88(15.6)
133⁄88(35.0)
2525⁄3232
(19.7)
11⁄44(6.3)
KB263 6
264L 38 5 KD111⁄22
(37.8)133⁄88
(35.0)
55⁄88(15.6)
133⁄88(35.0)
2525⁄3232
(19.7)
11⁄44(6.3)
KB263 6
265 50 6 KD13131⁄3232
(49.8)11111⁄1616
(42.9)
33⁄44(19.1)
1(25.0)
1(25.4)
1111⁄3232
(8.7)KB265 6
IN (MM) (1) INDICATE HANDING WHEN ORDERING KEY BLANKS
263L KDMODEL KEYING
E
A
B
C
D
F
BRASS PADLOCKSSECURITY HARDWARE
SOLID BRASS PADLOCKS
05.020ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
IRON PADLOCKSSECURITY HARDWARE
• Solid iron body• Hardened steel shackle, nickel plated• Solid brass internal parts• Single or double locking• Key removable in both locked and unlocked
position• 2 keys supplied with models 361 and 362 • 3 keys supplied with models 363 to 367
KEYINGKD: Keyed alike
*Keying services available
E
A
B
C
D
F
MODEL SIZE PINSBODY SIZE SHACKLE SIZE
KEY1 / BOXA B F C E ø D
DOUBLE LOCKING
363 32 5111⁄44
(32.0)133⁄1616
(30.0)
1919⁄3232
(15.0)
1313⁄6464
(5.2)
55⁄88(16.0)
1313⁄6464
(5.2)KB263 6
364 38 5111⁄22
(38.0)133⁄88
(35.0)
1111⁄1616
(17.0)
11⁄44(6.3)
33⁄44(19.0)
11⁄44(6.3)
KB263 6
365 50 62
(51.0)11111⁄1616
(43.0)
2323⁄3232
(18.4)
1111⁄3232
(8.8)1
(25.0)
1111⁄3232
(8.8)KB265 6
IN (MM) (1) INDICATE HANDING WHEN ORDERING KEY BLANKS
SOLID IRON PADLOCKS
263L KAMODEL KEYING
05.021 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
• Solid brass body, sanded finish• Hardened steel shackle, nickel plated• Solid brass cylinder, bolts and pins• Stainless steel springs• Key removable in locked or unlocked
position• Includes 2 nickel plated brass keys
OPTIONSKD: Keyed different (LH default)SA: Sub-assembled, indicate keyway
handing (RH/LH)CKD: Completely knocked down, indicate
keyway handing (RH/LH)
*Keying services available
MODEL SIZE PINSBODY SIZE SHACKLE SIZE*
KEYING QTY1
A B F C E ø D
301 30 4 30.0 27.0 13.0 15.0 15.7 5.0 KD, SA, CKD 12
302 40 5 40.0 32.0 15.0 20.0 23.0 6.4 KD, SA, CKD 12
303 50 5 50.0 40.0 17.0 28.0 30.0 8.0 KD, SA, CKD 6
304 60 5 60.0 46.0 20.0 35.0 35.0 10.0 KD, SA, CKD 6
305 70 5 70.0 51.0 23.0 42.0 38.0 12.0 KD, SA 6
MM (1) 12 : UNITS PER CASE (*) OPTIONAL SHACKLE LENGTHS AVAILABLE – SEE AVAILABILITY CHART BELOW
MODEL SIZESHACKLE SIZE VIRO
KEYWAYKEY1
C E ø D
301.30
30
30.0 15.7 5.0
011 301KB301.40 40.0 15.7 5.0
301.64 64.0 15.7 5.0
302.40
40
40.0 23.0 6.4
013 302KB302.64 64.0 23.0 6.4
302.90 90.0 23.0 6.4
303.48
50
40.0 30.0 8.0
015 302KB303.64 64.0 30.0 8.0
303.90 90.0 30.0 8.0
304.6460
64.0 35.0 10.0015 302KB
304.90 90.0 35.0 10.0
305.6470
64.0 38.0 12.0015 302KB
305.90 90.0 38.0 12.0
MM PLEASE CONTACT REPRESENTATIVE FOR HELP ORDERING CUSTOM PADLOCKS OR SHACKLES (1) KEY BLANKS AVAILABLE SEPARATELY
E
A
B
C
D
F
SOLID BRASS PADLOCKS
302 KDMODEL KEYING
VIRO PADLOCKSSECURITY HARDWARE
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
05.040ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, VIRO - REV. 2020-01.
ARMOURED PADLOCKS PANZER, MONOLITH
SPECIALTY PADLOCKSSECURITY HARDWARE
05.060ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, VIRO - REV. 2020-01.
A
B
C
D
E
MONOLITH
• One-piece, special case-hardened and tempered steel body, corrosion-resistant nickel plating
• Case-hardened and tempered steel rotating lockbolt• Lockbolt security protected by break-off handle if forced• 7-pin security system, replaceable and rekeyable, protected
by a rotating anti-drill plate in special case-hardened, tempered 33⁄1616" (4.4 mm) thick steel
• Supplied with 2 nickel plated brass keys
A
B
C
D
E
PANZER
• Solid forged brass one-piece padlock• Chrome plated case-hardened steel main and side armour• Chrome plated case-hardened steel anti-drill and pull
resistant plate protecting the plug• Case-hardened steel rotating lock bolt• Lockbolt security protected by break-off handle if forced• Mechanism: key-retaining, ball-type locking• Cylinder: 7-pin Viro039 keyway, re-keyable• Supplied with 3 nickel plated brass keys• Parts and pins available-please contact
A
B
C C
D
E
MODEL KEYING SIZE KEYWAY A B C ø D E / BOX
4115 KD 62 039RH2929⁄3232
(23)2
(51)
2525⁄3232
(20)
1313⁄3232
(10)277⁄1616
(62)1
4116 KD 77 039RH155⁄3232
(29)277⁄1616
(62)111⁄1616
(27)
1515⁄3232
(12)311⁄3232
(77)1
4117 KD 86 039RH155⁄3232
(29)22727⁄3232
(72)11313⁄3232
(36)
1515⁄3232
(12)333⁄88(86)
1
4125 KD 78 039RH2929⁄3232
(23)2
(51)
1313⁄3232
(10)
1313⁄3232
(10)311⁄1616
(78)1
4126 KD 86 039RH155⁄3232
(29)277⁄1616
(62)
77⁄1616
(11.5)
1515⁄3232
(12)333⁄88(86)
1
IN (MM)
MODEL KEYING SIZE KEYWAY A B C ø D E / BOX
4143 KD 78 039RH133⁄1616
(30)277⁄1616
(62)133⁄3232
(28)
11⁄22(13)
311⁄1616
(78)1
4144 KD 87 039RH133⁄1616
(30)233⁄44(70)
11515⁄3232
(37)
11⁄22(13)
377⁄1616
(87)1
IN (MM)
4117KB039 Nickel plated brass key blank
4115 / 4116 / 4117
4125 / 4126
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
4143 / 4144
DL2400 DEADLATCH LOCK DL24
DOREX MORTISE LOCKSSECURITY HARDWARE
05.200ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV. 2020-10.
• Heavy zinc plated steel construction• Chrome plated latch bolt with Delrin insert for smooth, quiet
latching• 11⁄22" (12.7 mm) latch throw• Zinc alloy dead locking pin• Left or right handed, field reversible• Cylinder backset: 3131⁄3232" (24.6 mm) or 111⁄88" (28.6 mm)• Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Key or turn-button controlled latch dogging• Radius anodized aluminum (#FP32) faceplate included• Other faceplates available, see page 05.203
A
B
CD
E
F
G H
BS
MODEL FINISH HANDING BS A B C D E F G H /CASE
DL2412-2 AL, DU LH 3131⁄3232
(24.6)52727⁄3232
(148.1)
11⁄22(12.7)
1(25.3)
677⁄88(174.6)
77⁄88(22.2)
11919⁄3232
(40.6)
55⁄88(16.2)
1(25.4)
25DL2422-2 AL, DU RH
DL2413-2 AL, DU LH 111⁄88(28.6)
52727⁄3232
(148.1)
11⁄22(12.7)
1(25.3)
677⁄88(174.6)
77⁄88(22.2)
11919⁄3232
(40.6)
55⁄88(16.2)
1(25.4)
25DL2423-2 AL, DU RH
IN (MM)
DL2500 DEADLATCH LOCK – HEAVY DUTY DL25
A
B
CD
E
F
G H
BS • Heavy zinc plated steel construction• Adjustable mounting studs for easy lock alignment• Solid zinc alloy latch bolt with 11⁄22" (12.7 mm) throw• Zinc alloy dead locking pin• Left or right handed, field reversible• Cylinder backset: 3131⁄3232" (24.6 mm) or 111⁄88" (28.6 mm)• Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Key or turn-button controlled latch dogging• Radius anodized aluminum (#FP32) faceplate included• Other faceplates available, see page 05.203
MODEL FINISH HANDING BS A B C D E F G H /CASE
DL2512-2 AL, DU LH 3131⁄3232
(24.6)7
(177.8)
11⁄22(12.7)
1(25.4)
677⁄88(174.6)
77⁄88(22.5)
155⁄88(41.2)
55⁄88(15.7)
1(25.4)
25DL2522-2 AL, DU RH
DL2513-2 AL, DU LH 111⁄88(28.6)
7(177.8)
11⁄22(12.7)
1(25.4)
677⁄88(174.6)
77⁄88(22.5)
155⁄88(41.2)
55⁄88(15.7)
1(25.4)
25DL2523-2 AL, DU RH
IN (MM)
05.201 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV. 2020-10.
DOREX MORTISE LOCKSSECURITY HARDWARE
DB2100 DEADBOLT LOCK DB21
A D
E
F
G H
C
B
BS
• Heavy zinc plated steel construction• 5-ply laminated steel pivot bolt with 3 case-hardened
center plies plus hardened roll pin (sawing test meets ANSI performance specifications)
• 133⁄88" (35.1 mm) bolt throw• Non-handed• Cylinder backset: 77⁄88" (22.2 mm), 3131⁄3232" (24.6 mm) or
111⁄88" (28.6 mm)• Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Flat anodized aluminum (#FP11) faceplate included• Other faceplates available, see page 05.203
MODEL FINISH BS A B C D E F G H /CASE
DB2101-1 AL, DU77⁄88
(22.2)6
(152.7)133⁄88
(35.1)133⁄88
(34.4)677⁄88
(174.6)
2929⁄3232
(22.8)11919⁄3232
(40.0)
55⁄88(15.3)
1(25.4)
25
DB2102-1 AL, DU3131⁄3232
(24.6)6
(152.7)133⁄88
(35.1)133⁄88
(34.4)677⁄88
(174.6)
2929⁄3232
(22.8)1 5/8(41.2)
55⁄88(15.3)
1(25.4)
25
DB2103-1 AL, DU111⁄88
(28.6)6
(152.7)133⁄88
(35.1)133⁄88
(34.4)677⁄88
(174.6)
2929⁄3232
(22.8)1 25/32(45.1)
55⁄88(15.3)
1(25.4)
25
IN (MM)
DB2200 DEADBOLT LOCK – SHORT THROW DB22
• Heavy zinc plated steel construction• 5-ply laminated steel pivot bolt with 3 case-hardened
center plies plus hardened roll pin (sawing test meets ANSI performance specifications)
• 1313⁄1616" (20.5 mm) bolt throw• Non-handed• Cylinder backset: 3131⁄3232" (24.6 mm) or 111⁄88" (28.6 mm)• Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Flat anodized aluminum (#FP11) faceplate included• Other faceplates available, see page 05.203
A D
E
F
G
H
C
B
BS
MODEL FINISH BS A B C D E F G H /CASE
DB2202-1 AL, DU3131⁄3232
(24.6)6
(152.7)
1313⁄1616
(20.5)11111⁄3232
(34.1)677⁄88
(174.6)
2929⁄3232
(22.9)155⁄88
(41.4)
55⁄88(15.3)
1(25.4)
25
DB2203-1 AL, DU111⁄88
(28.6)6
(152.7)
1313⁄1616
(20.5)11111⁄3232
(34.1)677⁄88
(174.6)
2929⁄3232
(22.9)12525⁄3232
(45.1)
55⁄88(15.3)
1(25.4)
25
IN (MM)
HB2300 HOOKBOLT LOCK HB23
DOREX MORTISE LOCKSSECURITY HARDWARE
05.202ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV. 2020-10.
• Heavy zinc plated steel construction• 5-ply laminated steel pivot bolt with 3 case-hardened
center plies plus hardened roll pin (sawing test meets ANSI performance specifications)
• 1313⁄1616" (20.5 mm) bolt throw• Non-handed• Cylinder backset: 3131⁄3232" (24.6 mm) or 111⁄8 8 " (28.6 mm)• Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Flat anodized aluminum (#FP21) faceplate included• Other faceplates available, see page 05.203
A C D
E
F G
H
BS
B
MODEL FINISH BS A B C D E F G H /CASE
HB2302-1 AL, DU3131⁄3232
(24.6)6
(152.7)
1717⁄3232
(13.4)111⁄44
(31.8)677⁄88
(174.6)
2929⁄3232
(22.9)155⁄88
(41.4)
55⁄88(15.3)
1(25.4)
25
HB2303-1 AL, DU111⁄88
(28.6)6
(152.7)
1717⁄3232
(13.4)111⁄44
(31.8)677⁄88
(174.6)
2929⁄3232
(22.9)12525⁄3232
(45.1)
55⁄88(15.3)
1(25.4)
25
IN (MM)
DOREX MORTISE LOCKSSECURITY HARDWARE
VARIOUS ACCESSORIES
GB01
HBSTR
LS01 DL STRIKE
• Standard flat stainless steel deadlatch strike• Includes dustbox, mounting plate and
machine screws
LS02 DL STRIKE
• Flat reversible stainless steel deadlatch strike (used when converting to DL series from door prepped for DB or HB series)
• Includes black plastic dust box, steel mounting plate and machine screws
LS01
LS02
DBSTR DB STRIKE
• Heavy duty zinc plated deadbolt strike
HBSTR HB STRIKE
• Heavy duty zinc plated hookbolt strike
GB01 GUARD BOX
• Heavy gauge steel guard box for DB or HB series for added protection
• Accepts standard 111⁄88" (28.6mm) backset mortise deadbolt or hookbolt with 155⁄3232" (29.4 mm) diameter mortise cylinder
DBSTR
05.203 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV. 2020-01.
FP1
STILE FORM DESCRIPTION SERIES MODEL FINISH / CASE
Flat 677⁄8 8 x 1 (174.6 x 25.4)
DB FP11AL DU
25HB FP21
DL FP31
Bevelled, left hand 677⁄8 8 x 1 (174.6 x 25.4)
DB FP13AL DU
25HB FP23
DL FP33
Bevelled, right hand 677⁄8 8 x 1 (174.6 x 25.4)
DB FP14AL DU
25HB FP24
DL FP34
Radius 677⁄8 8 x 1 (174.6 x 25.4)
DB FP12AL DU
25HB FP22
DL FP32
Radius, weatherstrip, left hand 677⁄8 8 x 1 (174.6 x 25.4)
DB FP15AL DU
25HB FP25
DL FP35
Radius, weatherstrip, right hand 677⁄8 8 x 1 (174.6 x 25.4)
DB FP16AL DU
25HB FP26
DL FP36IN (MM) ALL FACEPLATES ARE ANODIZED ALUMINUM
MORTISE LOCK FACEPLATES
FP2 FP3
LGF/RGF FACEPLATE GUARD
• Heavy gauge steel faceplate guard provides added protection
• Used with guard box #GB01
LGF
DEADLATCH LOCK 8516, 8517, 8518, 8519
VIRO MORTISE LOCKSSECURITY HARDWARE
DEADBOLT LOCK 8506, 8507, 8508
05.210ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, VIRO - REV. 2020-01.
• Heavy galvanized steel construction• Solid zinc alloy latch bolt• Zinc alloy dead locking pin with ball bearing tip• 1717⁄3232" (13.6 mm) latch throw• Reversible• Cylinder backset: 77⁄88" (22.2 mm), 3131⁄3232" (24.6 mm),
111⁄88" (28.6 mm) or 111⁄22" (38.1 mm)• Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Key or turn-button controlled latch dogging• Faceplate #9902C28 sold separately
A
B
CD
E
F
G H
BS
MODEL BS A B C D E F G H
851677⁄88
(22.2)51313⁄1616
(147.3)
1717⁄3232
(13.6)1
(25.3)677⁄88
(174.9)
77⁄88(22.4)
111⁄22(38.2)
55⁄88(16.0)
1(25.2)
85173131⁄3232
(24.6)51313⁄1616
(147.3)
1717⁄3232
(13.6)1
(25.3)677⁄88
(174.9)
77⁄88(22.4)
11919⁄3232
(40.6)
55⁄88(16.0)
1(25.2)
8518111⁄88
(28.6)51313⁄1616
(147.3)
1717⁄3232
(13.6)1
(25.3)677⁄88
(174.9)
77⁄88(22.4)
133⁄44(44.6)
55⁄88(16.0)
1(25.2)
8519111⁄22
(38.1)51313⁄1616
(147.3)
1717⁄3232
(13.6)1
(25.3)677⁄88
(174.9)
77⁄88(22.4)
211⁄88(54.1)
55⁄88(16.0)
1(25.2)
IN (MM)
A D
E
F
G H
C
B
BS• Heavy galvanized steel construction• Tough laminated swinging deadbolt • 133⁄88" (34.9 mm) latch throw• Non-handed• Cylinder backset: 77⁄88" (22.2 mm), 3131⁄3232" (24.6 mm), or
111⁄88" (28.6 mm) • Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Faceplate #9934C28 sold separately
MODEL BS A B C D E F G H
850677⁄88
(22.2)6
(152.5)133⁄88
(34.9)133⁄88
(34.3)677⁄88
(174.9)1
(25.2)11717⁄3232
(38.9)
1919⁄3232
(15.0)1
(25.2)
85073131⁄3232
(24.6)6
(152.5)133⁄88
(34.9)133⁄88
(34.3)677⁄88
(174.9)1
(25.2)155⁄88
(41.3)
1919⁄3232
(15.0)1
(25.2)
8508111⁄88
(28.6)6
(152.5)133⁄88
(34.9)133⁄88
(34.3)677⁄88
(174.9)1
(25.2)12323⁄3232
(45.3)
1919⁄3232
(15.0)1
(25.2)IN (MM)
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
05.211 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, VIRO - REV. 2020-01.
VIRO MORTISE LOCKSSECURITY HARDWARE
HOOKBOLT LOCK 8513, 8514
FACEPLATES
• Heavy galvanized steel construction• Tough laminated swinging hookbolt • 1313⁄1616" (20.6 mm) latch throw• Non-handed• Cylinder backset: 111⁄88" (28.6 mm) or 111⁄22" (38.1 mm)• Lock accepts standard 155⁄3232" (29.4 mm) diameter mortise
cylinder with cam A (Adams Rite type)• Faceplate #9946C28 sold separately
A C D
E
F
G H
BS
B
MODEL BS A B C D E F G H
8513111⁄88
(28.6)6
(152.5)
1313⁄1616
(20.6)111⁄44
(31.3)677⁄88
(174.9)
77⁄88(22.0)
12323⁄3232
(45.3)
55⁄88(16.0)
1(25.2)
8514111⁄2 2
(38.1)6
(152.5)
1313⁄1616
(20.6)111⁄44
(31.3)677⁄88
(174.9)
77⁄88(22.0)
211⁄44(56.8)
55⁄88(16.0)
1(25.2)
IN (MM)
• Faceplates for VIRO deadlatch, deadbolt and hookbolt locks• Flat anodized aluminum faceplate
MODEL LOCK WIDTH LENGTH THICKNESS /BOX
9902C28 Deadlatch
1(25.4)
6 77⁄88(174.9)
11⁄88(3.2)
209934C28 Deadbolt
9946C28 Hookbolt
IN (MM)
9902 9934 9946
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
HANDLES & PADDLESSECURITY HARDWARE
05.240ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, DOREX - REV. 2020-01.
• Lever handle with cam for DL2000 series deadlatch, to be used on 133⁄44" (44 mm) thick aluminum doors
• Left hand or right hand, field reversible• Sturdy and dependable aluminum alloy construction• Hardened steel spindle and cam• 3" (76 mm) center to center mounting holes• Cam (#0112PLUGLH / RH) included but also sold separately
#0112RH for Left Hand Reverse (LHR) or right hand (RH) outswing doors
#0112LH for Right Hand Reverse (RHR) or left hand (LH) outswing doors
For LH handle in Left Hand Reversed use #0112PLUGRHFor RH handle in Right Hand Reversed use #0112PLUGLH
MODEL HAND FINISH A B C D E F G /CASE
0112 LH, RH C20D, C284
(101.5)3
(76.0)11111⁄3232
(34.0)
77⁄88(22.4)
11515⁄1616
(48.8)
2323⁄3232
(18.0)333⁄44
(95.1)50
IN (MM) LH: LEFT HAND, RH: RIGHT HAND
G
A
E
F
D
C
B
RIGHT HAND (RH) HANDLE SHOWN
B
A
D
EF
G
C
• PUSH / PULL paddle with cam for DL2000 series deadlatch• Left hand or right hand, field reversible• Zinc alloy base • Extruded and anodized aluminum paddle• 3" (76.2 mm) center to center concealed mounting holes• Spring (#5590S) and extension kit (#5590SPK) for
211⁄44" (57.2 mm) door thickness are available• Cam (0112PLUGLH / RH) included but also sold separately
#5590*R for Left Hand Reverse (LHR) or right hand (RH) outswing doors
#5590*L for Right Hand Reverse (RHR) or left hand (LH) outswing doors
For LH handle in Left Hand Reversed use #0112PLUGRHFor RH handle in Right Hand Reversed use #0112PLUGLH
MODEL FINISH HAND A B C D E F G /CASE
5590 C20D, C28 L, R411⁄3232
(102.8)41515⁄1616
(125.7)31111⁄3232
(85.0)11111⁄3232
(34.0)155⁄1616
(33.0)
99⁄1616
(14.0)233⁄88
(60.0)20
IN (MM) L: LEFT HAND, R: RIGHT HAND
LEVER HANDLE
PUSH/PULL PADDLE
UNIVERSAL ELECTRIC STRIKE SGT78
ELECTRIC STRIKESSECURITY HARDWARE
05.260ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-11.
• Heavy duty (Grade 2 – 900,000 cycles)• Low profile body fits most metal frames• Non handed, reversible• 12/24 AC/DC voltage (300 mA @ 12VDC / 150 mA @ 24VDC)• Varistor included (surge protection)• Static strength: 1000 lbs (454 kg)• Dynamic strength: 50 ft-lbs (68 N-m)• Field configurable Fail Safe (unlocked) / Fail Secure (locked)• Includes three (3) stainless steel faceplates:
ANSI Round, ANSI Square and Wood Door (see below)• 5-year limited warranty
MODEL FINISH A B C D E F G H
SGT78 630477⁄88
(123)411⁄88
(104)11717⁄3232
(39)111⁄44(32)
333⁄88(85)
177⁄88(47)
177⁄3232
(31)
11⁄88(3)
IN (MM)
FACEPLATE TYPE A B C D E
FP614SQ ANSI SQUARE477⁄88
(123)411⁄88
(104)111⁄44(32)
333⁄88(85)
33⁄44(19)
FP604RO ANSI ROUND
FP608RO WOOD DOOR71515⁄1616
(203)711⁄22
(189)177⁄1616
(37)333⁄88(85)
299⁄3232
(58)IN (MM)
• Stainless steel face plates• Included with #SGT78 only, not available individually• FP604RO & FP608RO, with 55⁄3232" (4 mm) radius
E
D
F
H
A B C
G
A B
C
D
E
FP604RO
FP608RO
FP614SQ
05.261 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, PESO - REV. 2020-011.
• Tough zinc alloy strike latch for wood frame application• Reliable, mechanical and electrical components• 55⁄3232" (4.0 mm) horizontal adjustment after installation • Designed for a latch projection up to 55⁄88" (15.9 mm)• Symmetrical construction, non-handed• Faceplate finish: heavy coat of metallic silver lacquer• Electrical mode: “Fail Secure (locked)”• Buzz sound occurs only if AC current is used• Duty cycle: Intermittent (60 seconds maximum)• 2-year limited warranty (excessive force and coil
burn-out not included)
A B C
D
E
F
G
H
I
• Tough zinc alloy strike latch for metal frame application• Reliable, well-functioning mechanical and electrical
components• 55⁄3232" (4.0 mm) horizontal adjustment after installation• Designed for a latch projection up to 55⁄88" (15.9 mm)• Symmetrical construction, non-handed• Faceplate finish: heavy coat of metallic silver lacquer• Electrical mode: “Fail Secure (locked)”• Buzz sound occurs only if AC current is used• Duty cycle: Intermittent (60 seconds maximum)• 2-year limited warranty (excessive force and coil
burn-out not included)
A B C
D
E G
F
MODEL MODE DUTY CYCLE VOLTAGE CURRENT RESISTANCE SOUND
700-16Fail Secure
(locked)Intermittent
8 – 24 AC 0.36 – 1.09A N/A Buzz(AC only)8 – 16 DC 0.44 – 0.89A 18 Ω
MODEL MODE DUTY CYCLE VOLTAGE CURRENT RESISTANCE SOUND
710-16Fail Secure
(locked)Intermittent
8 – 24 AC 0.36 – 1.09A N/A Buzz(AC only)8 – 16 DC 0.44 – 0.89A 18 Ω
710-24Fail Secure
(locked)Intermittent
16 – 24 AC 0.30 – 0.45A N/A Buzz(AC only)16 – 24 DC 0.40 – 0.60A 40 Ω
MODEL A B C D E F G / CASE
700577⁄3232
(133)477⁄1616
(112.6)11515⁄1616
(49.6)1
(25.2)11515⁄3232
(37.7)
1313⁄1616
(20.4)
11⁄88(3.2)
100
IN (MM)
MODEL A B C D E F G H I /CASE
71052929⁄3232
(149.9)555⁄1616
(134.7)111⁄44
(31.9)155⁄3232
(29.1)22323⁄3232
(69.1)11515⁄3232
(37.2)11717⁄3232
(38.5)
2525⁄3232
(19.9)
11⁄88(3.2)
100
IN (MM)
ELECTRIC STRIKESSECURITY HARDWARE
ELECTRIC STRIKES 700, 710
MORTISE CYLINDERSSECURITY HARDWARE
05.400ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-11.
KEY CYLINDER • Solid brass cylinder with 5 or 6 pins• Drilled for Construction Master Key (CMK)• Adams Rite type (A) cam included• Trim ring NOT included; sold separately (#COL6-26D)• Keyways: Schlage (SC), Yale (YA) or Weiser (WR) • Includes 2 keys• Cam type B available; sold separately (#MC-CAMB)
MODEL LENGTH ø A B ø C CAM KEYWAY KEYING PINS FINISH / CASE
MC 100133⁄88(35)
1(25.4)
155⁄3232
(29.1)A SC, YA, WR KD, KAX2 5 26D 100
MC 118133⁄88(35)
1 11⁄88 (29)
155⁄3232
(29.1)A SC, YA, WR KD6 6 26D, 10B 100
MC 114133⁄88(35)
1 11⁄44(32)
155⁄3232
(29.1)A SC, YA KD6 6 26D 100
IN (MM) (*) FULL KEYING SERVICES AVAILABLE. KA2X: KEYED ALIKE, PAIRED CYLINDERS, 50 PAIRS PER CASE KD: KEYED DIFFERENT, 5 PIN, DRILLED 6 KD6: KEYED DIFFERENT, 6PINS
MORTISE CYLINDERS – BRASS MC
MC 118 A - SC KD6 - 26DMODEL LENGTH CAM KEY KEYING FINISH
A C
B
E
M-T
M-TA
M-D
A C
B
A C
B
E
THUMB-TURN CYLINDERS • Solid brass construction• Ergonomic ADA thumb-turn for easy turning (TA)• Regular thumb-turn available (T)• Adams Rite type (A) cam included• Trim ring NOT included; sold separately (#COL6-26D)• Cam type B available; sold separately (#MC-CAMB)
DUMMY CYLINDER • Solid brass construction (not hollow)• Trim ring NOT included; sold separately (#COL6-26D)
A C
B
M 100 - D - 20DMODEL LENGTH TYPE FINISH
M 118 A - TA - 26DMODEL LENGTH CAM TYPE FINISH
MODEL LENGTH ø A B ø C E CAM TYPE FINISH / CASE
M 100133⁄88(35)
1(25.4)
155⁄3232
(29.1)— — D, T, TA 26D, 10B 100
M 118133⁄88(35)
111⁄88 (29)
155⁄3232
(29.1)1
(25.4)A TA 26D 100
M 114133⁄88(35)
111⁄44(32)
155⁄3232
(29.1)133⁄44
(44.5)A TA 26D 100
IN (MM)
MC
MORTISE CYLINDERSSECURITY HARDWARE
05.401 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
A C
B
A C
B
A C
B
MORTISE CYLINDERS – BRASS CBM
KEY CYLINDER • Solid brass construction with aluminum clad face• 5-pin, or 5-pin drilled for 6-pin• Trim ring included• Keyways: Schlage (SC), Yale #9 (Y9) or Weiser (WR) • Includes 2 keys• Cams: Adams Rite type (cam A) or Yale type (cam B)
MODEL LENGTH ø A B ø C CAM KEYWAY KEYING PINS FINISH / CASE
CBM 034133⁄88(35)
33⁄44(19)
155⁄3232
(29.1)A, B
SC, Y9, WR
KA, KA2, KD
520D, 26D,
28100
CBM 100133⁄88(35)
1(25.4)
155⁄3232
(29.1)A, B
SC, Y9, WR
KA, KA2, KD
520D, 26D,
28100
CBM 118133⁄88(35)
111⁄88 (29)
155⁄3232
(29.1)A, B
SC, Y9, WR
KA, KA2, KD
5*20D, 26D,
28100
CBM 114133⁄88(35)
111⁄44(32)
155⁄3232
(29.1)A, B
SC, Y9, WR
KA, KA2, KD
5*20D, 26D,
28100
IN (MM) (*) 5-PIN CYLINDER, DRILLED 6 KA: KEYED ALIKE KA2: KEYED ALIKE, PAIRED CYLINDERS, 50 PAIRS PER CASE KD: KEYED DIFFERENT
CBM 118 A - SC KD - 28MODEL LENGTH CAM KEY KEYING FINISH
CBM-T1
CBM-DM
THUMB-TURN CYLINDER • Solid brass construction with aluminum clad face• Trim ring included• Cams: Adams Rite type (cam A) or Yale type (cam B)
DUMMY CYLINDER • Solid brass construction with aluminum clad face• Trim ring included
CBM 100 - DM - 28MODEL LENGTH TYPE FINISH
CBM 100 A - T1 - 28MODEL LENGTH CAM TYPE FINISH
MODEL LENGTH ø A B ø C CAM* TYPE FINISH / CASE
CBM 100133⁄88(35)
1(25.4)
155⁄3232
(29.1)A, B DM, T1 20D, 28 100
IN (MM) (*) LEAVE BLANK WHEN ORDERING DUMMY CYLINDER
CBM
MORTISE CYLINDERSSECURITY HARDWARE
MORTISE CYLINDERS – ZINC CZM
A C
B
A C
B
A C
B
KEY CYLINDER • Solid zinc construction with aluminum clad face• 5-pin cylinder• Trim ring included• Keyways: Schlage (SC), Yale #9 (Y9) or Weiser (WR) • Includes 2 keys• Cams: Adams Rite type (cam A) or Yale type (cam B)
MODEL LENGTH ø A B ø C CAM KEYWAY KEYING PINS FINISH / CASE
CZM 100133⁄88(35)
1(25.4)
155⁄3232
(29.1)A, B
SC, Y9, WR
KA, KA2, KD
520D, 26D,
28100
IN (MM) KA: KEYED ALIKE KA2: KEYED ALIKE, PAIRED CYLINDERS, 50 PAIRS PER CASE KD: KEYED DIFFERENT
CZM 100 A - SC KD - 28MODEL LENGTH CAM KEY KEYING FINISH
CZM-T1
CZM-DM
THUMB-TURN CYLINDER • Solid zinc construction with aluminum clad face• Trim ring included• Cams: Adams Rite type (cam A) or Yale type (cam B)
DUMMY CYLINDER • Solid zinc construction with aluminum clad face• Trim ring included
CZM 100 - DM - 28MODEL LENGTH TYPE FINISH
CZM 100 A - T1 - 28MODEL LENGTH CAM TYPE FINISH
MODEL LENGTH ø A B ø C CAM* TYPE FINISH / CASE
CZM 100133⁄88(35)
1(25.4)
155⁄3232
(29.1)A, B DM, T1 20D, 28 100
IN (MM) (*) LEAVE BLANK WHEN ORDERING DUMMY CYLINDER
CZM
05.402ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
MORTISE CYLINDERSSECURITY HARDWARE
05.403 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA, VIRO - REV. 2020-01.
MORTISE CYLINDERS
• Solid brass cylinder and trim ring• 5-pin Viro #015 keyway• Supplied with 3 nickel-plated brass keys per pair of cylinders• Supplied with cam A; cam B (#CAM991) available separately• Packaged and sold in pairs• Keyed alike in pairs• Key blank: #303KB015RH
A C
B
MODEL FINISH MATERIAL LENGTH CAM KEYWAY KEYING /UNIT /BOX
731731 C3, C15 Brass1
(25.3)A Viro #015 KA2 2 6*
732 C3, C15 Brass1
(25.3)A — — 1 6
(*) 3 PAIRS
MODEL ø A B ø C
731731 732
111⁄44(31.8)
1(25.3)
155⁄3232
(29.1)IN (MM)
A
C
B
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
731731
732
RIM CYLINDERSSECURITY HARDWARE
05.410ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
RIM CYLINDER MR
RIM CYLINDER CBR
MODEL ø A ø B C D E F G
MR133⁄88
(34.5)155⁄3232
(29.1)2 77⁄1616
(60)11313⁄6464
(31)
33⁄1616 (1.2)
11313⁄1616
(45.8)
33⁄1616
(5)IN (MM)
• Solid brass cylinder, trim ring included• Cylinder length: 118 = 111⁄88" (28.6 mm)• 6-pin, drilled for Construction Master Key (CMK)• Keyways: Schlage (SC) or Weiser (WR)• 2 keys included• Tailpiece converts between horizontal and vertical positions• Screw-on retaining cap
MR 118 - WR KD6 - 26DMODEL LENGTH KEY KEYING FINISH
• Solid brass with aluminum clad face, trim ring included• Cylinder length: 114 = 111⁄44" (32 mm)• Keyways: 6-pin Schlage (SC) or special order 5-pin Yale #9 (Y9)• 2 keys included• Standard tailpiece and mounting hardware
CBR 114 - Y9 KD -26DMODEL LENGTH KEY KEYING FINISH
MODEL LENGTH CAM KEYWAY KEYING* PINS FINISH / CASE
MR 118 — SC, WR KD6 6 19, 26D 100
(*) FULL KEYING SERVICES AVAILABLE – PLEASE CONTACT KD: KEYED DIFFERENT
C
G
A
F
B
E
D
B D
C
E
A
MODEL ø A ø B C D E
CBR133⁄88
(34.5)155⁄3232
(29.1)2 77⁄1616
(62)111⁄44(32)
11⁄1616
(1.6)IN (MM)
MODEL LENGTH CAM KEYWAY KEYING PINS FINISH / CASE
CBR 114 — SC, Y9* KD 6 19, 26D 100
(*) SPECIAL ORDER KD: KEYED DIFFERENT
05.411 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA, - REV. 2020-01.
RIM CYLINDERSSECURITY HARDWARE
DUMMY RIM CYLINDER 160
• Solid brass construction• Covers cylinder hole in doors up to 211⁄44" (57.2 mm) thick• Supplied with mounting backplate and 2" (50.8 mm) long
break away screw• Available is brass plated (BP) or satin chrome (C26D) finishes
A
AB
MODEL FINISH ø A ø B /CASE
160BP,
C26D11313⁄1616
(46) 177⁄88(48)
300
IN (MM)
CYLINDER TRIM RINGS & GUARDS
CYLINDER TRIM RINGSSECURITY HARDWARE
05.420ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
811A 812A
C
B E
A
D817 818 819 COL6
C A
E
B
C
B
A
D
E
MODEL FINISH MATERIAL ø A ø B ø C D E / BOX
811A C26D, C28 Aluminum11313⁄3232 (36.0)
155⁄3232 (29.3)
111⁄22 (38.0)
77⁄32 32
(5.5)— 100
812A C26D, C28 Aluminum11313⁄3232
(36.0)155⁄3232
(29.3)199⁄1616
(39.6)
77⁄32 32
(5.5)— 100
IN (MM)
MODEL FINISH MATERIAL ø A ø B ø C D E / BOX
817S C26D Hardened steel11313⁄3232 (36.0)
133⁄1616
(30.0)11111⁄1616
(42.9)
77⁄1616
(11.4)
99⁄3232
(7.0)50
818S C28, C26D Hardened steel111⁄22
(37.8)133⁄1616
(30.0)11111⁄1616
(42.9)
99⁄3232
(7.3)
33⁄1616
(4.4)50
819A C15, C26, C26D Aluminum11111⁄3232
(34.0)177⁄3232
(31)177⁄88
(47.6)
11⁄88(3.75)
33⁄3232
(2.0)100
COL6 C28, C26D Hardened steel11313⁄3232
(36.0)133⁄1616
(30.0)177⁄1616
(36.6)
99⁄1616
(14.3)
33⁄1616*(4.5*)
100
IN (MM) (*) 55⁄1616 " (7.5 MM) WITH INCLUDED 11⁄88 " (3 MM) BLOCKING RING.
MODEL FINISH MATERIAL ø A ø B ø C D E / BOX
814S C26D Steel133⁄88
(35.0)1 33⁄1616
(30.0)2
(50.8)
99⁄1515–77⁄88(14.3–22.2)
2727⁄6464 – 4747⁄6464
(10.7–18.6)250
IN (MM)
ADJUSTABLE CYLINDER TRIM RING
SPRING WASHER AND BLOCKING RING INCLUDED.
05.421 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
CYLINDER TRIM RINGSSECURITY HARDWARE
A B
C
• Solid aluminum blocking ring for 155⁄3232" (29 mm) mortise cylinder
MODEL MATERIAL ø A ø B C / BOX
815A Aluminum133⁄88(35)
155⁄3232
(29)
11⁄44(6.4)
100
IN (MM)
BLOCKING RING
A
C
B
• Stainless steel spring washer for 155⁄3232" (29 mm) mortise cylinder
MODEL MATERIAL ø A ø B C / BOX
820S Stainless steel133⁄88(35)
155⁄3232
(29)
55⁄3232
(4.1) 500
IN (MM)
SPRING WASHER
A B
C
• Solid brass threaded locking ring nut for 155⁄3232" (29 mm) mortise cylinder
MODEL MATERIAL ø A ø B C / BOX
2315-2 Brass155⁄1616
(33.5) 111⁄88
(28.6)
55⁄3232
(4.1) 100
IN (MM)
MORTISE CYLINDER RING NUT
EF
BD
A
C• Heavy aluminum plate• Mounts to metal door with 4 steel 33⁄1616" (4.8 mm)
pop rivets (included)• 11⁄44" (6.4 mm) cylinder recess
MODEL FINISH A B C D E ø F /BOX
5510 Aluminum4
(102) 155⁄88
(41.4)
11⁄22(12.8)
1(25.5)
3(76)
133⁄1616
(30.1) 20
IN (MM)
• Solid 6061 aluminum plate• Handed• Mounts to metal door with 6 steel 33⁄1616" (4.8 mm)
pop rivets (included)• For use on narrow style aluminum doors• Protects latch, cylinder and strike• 1111⁄3232" (8.7 mm) cylinder recess• Cylinder spacers included
LPA45C for flush doorsLPA45D for offset doorsLPA45F for offset doors with wide
electric strike
BD
G E
F
C
AH
JK
L
M
MODEL A B C D E F ø G H J K L M
LPA45C633⁄44
(171)311⁄44
(82.5)
11⁄22(12.7)
1(25.4)
21919⁄3232
(66)3
(76)133⁄1616
(30)— — — — —
LPA45D633⁄44
(171)311⁄44
(82.5)
11⁄22(12.7)
1(25.4)
21919⁄3232
(66)3
(76)133⁄1616
(30)—
33⁄88(9.5)
—155⁄88(41)
—
LPA45F633⁄44
(171)311⁄44
(82.5)
11⁄22(12.7)
1(25.4)
21919⁄3232
(66)3
(76)133⁄1616
(30)455⁄88
(117)
33⁄88(9.5)
99⁄3232
(7.1)155⁄88(41)
111⁄22(38.1)
IN (MM)
LPA45 D
GUARDS & LATCH PROTECTORSSECURITY HARDWARE
05.430ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01
CYLINDER GUARD 5510
CYLINDER / LATCH GUARD LPA
• Unit covers the latch area of the door, thereby providing added protection from burglaries, vandalism or abuse
• For use with maximum 211⁄22" (63.5 mm) diameter mortise or 355⁄88" (92.1 mm) cylindrical lock
• Made of heavy gauge steel• 311P and 311LP are supplied with security pin to prevent
separation of the door and frame• Individually packed and supplied with carriage bolts and nuts
#311BOLTKIT Bolt kit for exterior doors with weatherstripping
A
ED
B
C
MODEL FINISH A B C D E /CASE
307
C287
(177.7)3
(76.3)
—
99⁄3232
(7)
33⁄44(19)
40307S233⁄44
(70.0)
307L299⁄1616
(65.0)
311P
C281077⁄88
(276.5)333⁄3232
(78.2)
—
99⁄3232 (7)
33⁄44(19)
40311S277⁄88
(73.0)
311LP255⁄88
(67.0)IN (MM)
311P307
LATCH PROTECTORS
05.431 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01
GUARDS & LATCH PROTECTORSSECURITY HARDWARE
311LP
DOUBLE CYLINDER
PROFILE CYLINDERSSECURITY HARDWARE
05.440ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 20120-08.
• Solid extruded tear-drop profile cylinder for sliding door mortise locks
• 5-pin Viro #062 keyway• 3 keys and 3" (76mm) fastening screw included• Escutcheon plate #721 sold separately;
2 required per cylinder
E BA
F
G D
C
MODEL NO.OF PINS KEYWAY KEYING FINISH A B C D E F G /BOX
9203 5Viro #062
KD C3, C15233⁄88(60)
1(25)
1313⁄3232
(10.1)133⁄1616
(30)
2121⁄3232
(17)155⁄1616
(33)
33⁄88(10)
10
92015 5Viro #062
KD C3233⁄44(70)
133⁄1616
(30)
1313⁄3232
(10.1)133⁄88(35)
2121⁄3232
(17)155⁄1616
(33)
33⁄88(10)
10
921 5Viro #062
KD C3, C15211⁄88(54)
77⁄88(22.2)
33⁄88(9.5)
111⁄1616
(27)
2121⁄3232
(17)155⁄1616
(33)
33⁄88(10)
10
IN (MM)
E
G
F
BAC
D
• Solid extruded tear-drop profile cylinder for sliding door mortise locks
• Brass knob, removable, easy to grip, with rounded edges• 5-pin Viro #015 keyway• 3 keys and fastening screw included• Escutcheon plate #721 sold separately;
2 required per cylinder• Viro keyblank #303KB available
721BP Brass Plated721NP Nickel Plated• Supplied with mounting
screws
THUMBTURN CYLINDER
MODEL NO.OF PINS KEYWAY KEYING FINISH A B C D E F G /BOX
7407 5 Viro #015 KD C3, C15233⁄44(70)
133⁄1616
(30)
1313⁄3232
(10.1)133⁄88(35)
2121⁄3232
(17)155⁄1616
(33)
33⁄88(10)
10
IN (MM)
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
303KB Nickel Plated Keyblank
9203 KD C15MODEL KEYING FINISH
7407 KD C15MODEL KEYING FINISH
721BP Brass Plated721NP Nickel Plated• Supplied with mounting
screws
KB062 Nickel Plated Keyblank
DOOR VIEWERS
DOOR VIEWERSSECURITY HARDWARE
05.600ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2021-06.
• Solid brass door viewer• Acrylic optical lens • Individually boxed
• Solid brass door viewer• cULus 20 minute fire rating for labelled fire doors• Polished glass and acrylic optical lenses • Individually boxed
DV180, DV200
MODEL FINISH DOOR THICKNESS ø BORE FIRE RATING VISION ANGLE /BOX
B02 C3, C26D
133⁄88 – 211⁄44 (35–57)
12mm — 160° 25
B03 C3, C26D 14mm — 180° 25
B04 C3, C26D 16mm — 200° 10
IN (MM)
B02
DV160
• Solid brass door viewer• cULus 90 minute fire rating for labelled fire doors• Polished glass and quartz lens• Individually boxed
DV1012BRQDV1012SRG DV1012BLQ
DV1016LG
• Solid brass door viewer• UL 20 minute fire rating• Polished optical glass lenses• Individually boxed
MODEL FINISH DOOR THICKNESS ø BORE FIRE RATING VISION ANGLE /BOX
DV160 3, 26, 26D133⁄88 – 2 (35–51)
12mm 20 min 160° 25
DV180 26D 14mm 20 min 180° 25
DV200 26D133⁄88 – 211⁄44 (35–57)
14mm 20 min 200° 10
IN (MM)
MODEL FINISH DOOR THICKNESS ø BORE FIRE RATING VISION ANGLE /BOX
DV1012SRG 15, 19, 26D1111⁄16 16 –111⁄1616
(17.5–27)12mm 90 min 160° 25
DV1012BRQ 26133⁄88 – 2 (35–51)
12mm 90 min 160° 42
DV1012BLQ 19, 26133⁄44 – 211⁄44 (44.5–57)
12 mm 90 min 200° 25
DV1014BLQ 15,19, 26D 14 mm 90 min 200° 25
IN (MM)
MODEL FINISH DOOR THICKNESS ø BORE FIRE RATING VISION ANGLE /BOX
DV1016LG 26D133⁄88 – 211⁄44 (35–57)
16 mm 20 min 200° 25
IN (MM)
05.601 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2021-06.
DOOR VIEWERSSECURITY HARDWARE
REVOLVING DOOR VIEWER 511
• Reflex door viewer with 2” (50.3 mm) screen • Warnock Hersey listed for 20 minutes fire rated location when
used with firestop sealant (not supplied) on a wood composite fire door
• Precision optics, no image distortion, clear viewing up to 7 feet away
• Individually carded
MODEL FINISH MATERIAL DOOR THICKNESS ø BORE FIRE RATING VISION ANGLE /UNIT
DS1000 BL, BR, GR ABS plastic133⁄88 – 2
(35 – 51)233⁄88
(60.3)20 min 132° 1
DS2000 SL, BL Aluminum
IN (MM)
• Revolving door viewer• Stamped brass components• Crystal optical glass lenses• Individually boxed• 511 KTD Extension kit available for 2” (50.3 mm) thick doors
• Zinc die cast door viewer• Polished glass optical lens• Viewer is intended for use with classified fire door rated up
to and including 90 minutes• Detachable lens cover is included• Individually boxed• Replacement lens cover: #DS300CHR-COVER
MODEL FINISH DOOR THICKNESS ø BORE FIRE RATING VISION ANGLE /UNIT
511 C3, C26D, C19133⁄88 – 133⁄44 *(35–44)
233⁄88(60.3)
— 140° 1
IN (MM) *UP TO 2” (50.3 MM) WITH EXTENSION KIT
REFLEX DOOR VIEWER DS1000, DS2000
DOOR VIEWER – LARGE DS300
MODEL FINISH DOOR THICKNESS ø BORE FIRE RATING VISION ANGLE /BOX
DS300 BP, CHR133⁄88 – 2
(35 – 51)
3131⁄3232
(24.5) 90 min 180° 15
IN (MM)
DS300CHR-COVER
VISIONANGLE
VISIONANGLE
VISIONANGLE
DOOR GUARDS & CHAINSSECURITY HARDWARE
05.610ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2021-05
• Listed for use on fire rated openings (3 hrs)• ADA Compliant• Zinc die-cast body and latch• Allows door to open 4°• Silicone pads protect door and reduce noise• Easy to install and operate• Includes sheet-metal screws, machine screws and rivet nuts• Rivet nut tool not included• Non-listed model available (#PDG)
PRIVACY DOOR GUARD
• Economical model plated steel chain guard with welded steel chain in poly bag
• Supplied with mounting screws• Nickel plated (NP) finish
MODEL CHAIN A B C D /BOX
232.620NP8
(203)177⁄1616
(36)333⁄88
(86.0)255⁄1616
(58)
1111⁄1616
(17.1)10
IN (MM)
D
B
A C
MODEL FINISH A B C D /BOX
PDGF PDG
15, 26D 255⁄88(66.6)
255⁄3232
(54.7)199⁄1616
(39)155⁄1616
(33)10
IN (MM)
DOOR CHAIN
RH28
• High security zinc alloy door guard, supplied with mounting screws• RH28 finish: antique brass, antique bronze, antique nickel,
polished brass, polished chrome, satin chrome or satin nickel
• Protective edge plates for door guard RH28EP, 99⁄1616 x 1 x 133⁄1616" (14.3 x 25.4 x 30 mm) sold separately
• Finish: RH28EP: aluminum(C28), polished brass (C3) AP34: satin chrome (626)
RH28EPC28RH28EPC3
AP34-626
DOOR GUARD
A
D
C
B
MODEL FINISH A B C D /BOX
RH28AB, AN, BP, C11P, CHR, SC, SN
411⁄44(108)
277⁄1616
(62)
1313⁄1616
(21)255⁄88(67)
10
IN (MM)
C
A
B
D
05.630ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
RIM LOCKSSECURITY HARDWARE
MODEL A B C /BOX
0515-122525⁄3232
(70.5)41313⁄3232
(112.0)1
(25.5)12
IN (MM)
B
A
C
• Zinc alloy case and keeper• Brass plated reinforced steel vertical bolts• 2 solid brass 5-pin Yale #9 keyway rim cylinders and trim
rings included• Cylinder screws for up to 211⁄44" (57 mm) door thickness• Supplied with mounting screws• Finish: painted gold color
B
A
EC
D
• Zinc alloy case and strike• Solid brass bolt and deadlatch button• Solid brass 5-pin Yale #9 keyway rim cylinder and trim
ring included• 99⁄1616" (14.4 mm) latch throw• Cylinder screws for up to 211⁄44" (57 mm) door thickness• Supplied with mounting screws• Finish: painted gold color
C
A
B
• Zinc alloy case and keeper• Brass plated reinforced steel vertical bolts• Solid brass 5-pin Yale #9 keyway rim cylinder and trim
ring included• Available keyed alike (KA) or keyed different (KD)• Cylinder screws for up to 211⁄44" (57 mm) door thickness• Supplied with mounting screws• Finish: painted gold color
MODEL A B C D E /BOX
0508-1211⁄22(63)
355⁄88(91.9)
99⁄1616
(14.4)
1515⁄1616
(24.1)111⁄44
(31.9)12
IN (MM)
NIGHT LATCH
JIMMY PROOF DEADLOCK
JIMMY PROOF DEADLOCK – DOUBLE CYLINDER
MODEL A B C /BOX
0515A-122525⁄3232
(70.5)41313⁄3232
(112.0)1
(25.5)12
IN (MM)
MODEL A B C D E ø G
WP4BA-32D411⁄22
(114.5)
4(102) 133⁄44
(45)—
233⁄88(60) 211⁄88
(54)WP4BB-32D
411⁄44(108)
233⁄44(70)
WP9BA-32D9
(229)
4(102) 133⁄44
(45)—
233⁄88(60) 211⁄88
(54)WP9BB-32D
411⁄44(108)
233⁄44(70)
WDC12BA-32D12
(305)
4(102) 133⁄44
(45)511⁄22
(140)
233⁄88(60) 211⁄88
(54)WDC12BB-32D
411⁄44(108)
233⁄44(70)
WDCP12BA-32D12
(305)
4(102) 133⁄44
(45)511⁄22
(140)
233⁄88(60) 211⁄88
(54)WDCP12BB-32D
411⁄44(108)
233⁄44(70)
IN (MM)
A
B
D
E
C
G
WP9 WDC12 WDCP12
• For cylindrical locks with 211⁄88" (54 mm) bore hole• For 133⁄44" (45 mm) door thickness• 22 gauge stainless steel• Latch faceplate recess fits:
111⁄88 x 211⁄44"(28.5 x 57mm) latches• Mounting screws included
DOOR PROTECTIONSECURITY HARDWARE
WRAP AROUND PLATES WP4B, WP9B, WDC12B, WDCP12B
05.640ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
CAM LOCKSSECURITY HARDWARE
B
B
A
D
CUTOUTLEFT HAND
E
C
MODELDEGREE OF TURN
PLUG POSITION
KEY REMOVAL
KEYWAY HANDING ø A ø B C D E /BOX
1003 90º Vertically offset Locked 013 Right hand1515⁄1616
(24.0)199⁄3232
(32.8)
1313⁄1616
(21.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1004 90º Vertically offset Locked 013 Right hand1515⁄1616
(24.0)199⁄3232
(32.8)111⁄3232
(26.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1005 90º Vertically offset Locked 013 Right hand1515⁄1616
(24.0)199⁄3232
(32.8)177⁄3232
(31.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1012 90º CenteredLocked or Unlocked
011 Non-handed*1515⁄1616
(24.0)199⁄3232
(32.8)
1111⁄1616
(17.5)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1013 90º CenteredLocked or Unlocked
013 Non-handed*1515⁄1616
(24.0)199⁄3232
(32.8)
1313⁄1616
(21.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1052 180º Vertically offset Locked 011 Non-handed*1515⁄1616
(24.0)199⁄3232
(32.8)
1111⁄1616
(17.5)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1053 180º Vertically offset Locked 013 Non-handed*1515⁄1616
(24.0)199⁄3232
(32.8)
1313⁄1616
(21.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1054 180º Vertically offset Locked 013 Non-handed*1515⁄1616
(24.0)199⁄3232
(32.8)111⁄3232
(26.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1055 180º Vertically offset Locked 013 Non-handed*1515⁄1616
(24.0)199⁄3232
(32.8)177⁄3232
(31.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
1056 180º Vertically offset Locked 013 Non-handed*1515⁄1616
(24.0)199⁄3232
(32.8)133⁄88
(35.0)
2525⁄3232
(20.0)
2323⁄3232
(18.3)12
IN (MM) (*) CONFIGURED FOR RIGHT-HAND USE, CAN BE CONVERTED TO LEFT-HAND
40.0
14.0
33.5
7.0 2.5
A/0
6.5 6.5
A/10 A/15
10.0 15.0
14.0
7.0 2.5
B/0 B/10 B/15
10.0 15.0
7.08.5
40.025.0
1515
CAM dimensions are in millimetres.
• Solid brass, fully threaded, pin tumbler cylinder• Handed models supplied RH, LH available on special order• Milled on one side to prevent rotation (single “D”)• 1012 and 1013 come with center plug position• Universal use, easy to install on wood or metal cabinet and
mailbox• Supplied with 4 prong steel washer, securing nut, cam screw
and 2 keys• Custom keyed systems available• Supplied with cam, please specify cam model• Finish: natural brass (C3) or nickel plated (C15)
301KB for 1012 & 1052 cam locks302KB for 1003, 1004, 1005, 1013, 1053,
1054, 1055 & 1056 cam locksAll key blanks are nickel plated brass
SOLID BRASS CAM LOCK
Wide variety of padlocks and specialty locks available – please contact to order or visit www.viro.it for details
1053 KD C15MODEL KEYING FINISH
CUTOUT
LEFT HAND
05.700ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA , VIRO - REV. 2020-01.
CAM LOCKSSECURITY HARDWARE
MAILBOX CAM LOCK
• Nickel plated zinc alloy body with clip mounting • Keyable 4-pin tumbler cylinder with brass pins, key retractable
in locked position• Many applications, 4 different cams included• Available with keyhole shutter (#S4103C)• Each set in poly bag• Finish: nickel plated
A B
C
D
E F
KL M
G H
DD
D
MODEL A B C D E F G H K L M /BOX
S4103S4103C
77⁄88(22.2)
2323⁄3232
(18.3)
1111⁄1616
(17.2)
55⁄6464
(2.0)11717⁄3232
(38.5)133⁄1616
(30)11313⁄1616
(46)177⁄3232
(31.2)
11⁄44(6.3)
1111⁄3232
(8.7)
1313⁄3232
(10.4)10
IN (MM)
• Nickel plated brass key blank
S4103KB
05.701 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
KEY CABINET
KEY CABINETSSECURITY HARDWARE
05.800ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
• Sturdy all metal construction with rounded corners allow for greater strength and durability
• Heavy gauge seamless steel• Scratch-resistant light grey paint• Rust proof• Complete with key hooks, key tags, 2 screws and plugs• Pre-slotted mounting holes• Lockable cabinet standard KD version, KA version available
with purchase of replacement CL50 keyed alike cam locks (see below), 2 keys per cabinet / cam lock supplied
A
B
C
KB50 / KB50-2• 4 pins• Nickel plated brass key blank• Available keyway 101 & 102
• Sturdy heavy gauge steel construction• Scratch resistant, painted red• Single key hook• Includes steel hammer-rod and cord• Lockable cabinet; 2 keys supplied • Pre-drilled mounting holes• Includes wood screws and plastic anchors
MODEL A B C /CASE
EB-0252929⁄3232
(150)41717⁄3232
(115)199⁄1616
(40)25
IN (MM)
A
C
B
CL50• Replacement cam lock for 50 series key cabinet• Key is removable in locked or unlocked position
with 90º angle rotation• Suitable for panel thickness up to 33⁄3232" (2.4 mm)• Available keying KA1, KA2, KD
MODELNUMBER OFKEY HOOKS
A B C /CASE
50-20 20 977⁄88(250)
711⁄88(180)
311⁄88(80.5)
12
50-40 40 8
50-50 50 111313⁄1616
(300)911⁄88
(230)399⁄1616
(90)
6
50-70 70 8
50-105 1051433⁄1616
(360)977⁄88
(250)433⁄88
(110)650-120 120
50-140 140IN (MM)
EMERGENCY BOX
05.801 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
KEY RINGSSECURITY HARDWARE
• Strong tempered spring steel split ring (20600 and TKR series)• Strong tempered steel light-duty split ring (P412 series)• Finish: nickel plated
A
B
C
AD
B
MODEL A ø B C D / BOX
CP421111⁄1616
(68.6)199⁄1616
(39.7)
1111⁄1616
(17.6)
11⁄88(3)
100
IN (MM)
20600 / TKR
P412
A
B
• Pull-apart tempered steel key ring• Finish: nickel plated
MODEL ø A B / BOX
PAR3 333⁄44 (95) 11⁄8 8 (3.1) 25
PAR4 5 (127) 11⁄8 8 (3.1) 25
PAR6 6 (152) 11⁄8 8 (3.1) 25IN (MM)
MODEL ø A B / BOX1 / CASE2
20616 55⁄88 (16) 33⁄6464 (1.2) 100 500
20619 33⁄44 (19) 11⁄1616 (1.6) 100 1000
20623 77⁄88 (22) 11⁄1616 (1.6) 100 1000
20625 1 (25) 11⁄1616 (1.6) 100 1000
20628 111⁄88 (28.3) 11⁄1616 (1.6) 100 500
20632 199⁄3232 (32.2) 55⁄6464 (2.0) 100 500
20635 133⁄88 (35.2) 55⁄6464 (2.0) 100 500
20638 111⁄22 (38) 55⁄6464 (2.0) 100 500
20645 133⁄44 (45) 33⁄3232 (2.4) 50 400
20651 2 (51) 33⁄3232 (2.4) 50 200
TKR16 233⁄1616 (55) 33⁄3232 (2.4) — 50
TKR24 3 (76) 11⁄88 (3.2) — 25
P412A 55⁄88 (16) 11⁄1616 (1.6) 10,000 40,000
P412B 1 (25) 11⁄1616 (1.6) 1,000 20,000IN (MM) (1) UNITS PER BAG (2) UNITS PER CASE
SPLIT KEY RINGS
PULL-APART KEY RING
HOOK KEY RING
• Tempered steel hook key ring
EASY-JOIN KEY RING
KEY RINGS & TAGSSECURITY HARDWARE
05.810ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
• Easy-join key ring with 2 tempered steel spring split rings and solid brass coupling
• Finish: nickel plated• Retail card display with 12 key rings• Not sold individually
A
B
MODEL A ø B / BOX
D603B311⁄88(80)
1(25.4)
120
IN (MM)
• Durable key tag with split ring• Made from polypropylene• Open and close flap with identification paper insert• Available colors: blue, clear, green, magenta, orange,
purple, red, and yellow
A
B
C
MODEL A B ø C / BOX
H8040155⁄3232
(29.5)299⁄3232
(57.8)1
(25.4)100
IN (MM)
KEY TAG WITH SPLIT RING
A
B• Coloured plastic label holder with split ring• H8036: 100 pieces per box• Available colors: black, blue, light green, orange, purple,
red and yellow• Display box also available as H8036STV200 with
200 pieces of 8 different colors: black, blue, light blue, light green, orange, purple, red and yellow
MODEL A B /BOX
H803677⁄88
(21.5)2
(51.0)100
H8036STV20077⁄88
(21.5)2
(51.0)200
IN (MM)
KEY TAG WITH SPLIT RING
H8036STV200
05.811 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-01.
KEY RINGS & TAGSSECURITY HARDWARE
C
A
B
• Solid polished brass tag
• For engraving
• 111⁄44" (31.8 mm) diameter
• 100 pieces per poly bag
MODEL ø A B C / BOX
104.120111⁄44
(31.8)
33⁄1616
(5.0)
11⁄3232
(1.0)500
IN (MM)
BRASS KEY TAG
TABLE OF CONTENTS GENERAL HARDWARE
Finish Guide ............................................................................................................... ii
Abbreviation Guide .................................................................................................... iii
PULL HANDLES & PLATES
Door Pulls .................................................................................................................. 06.010
Flush Pulls .................................................................................................................. 06.020
Edge Pulls .................................................................................................................. 06.030
Pulls, Multi-purpose ................................................................................................... 06.040
Door Pulls & Plates ..................................................................................................... 06.050
Push & Kick Plates ...................................................................................................... 06.060
DOOR STOPS & HOLDERS
Floor Stops................................................................................................................. 06.110
Wall Stops ................................................................................................................. 06.120
Hinge Pin Stops.......................................................................................................... 06.130
Door Stops with Holder.............................................................................................. 06.140
Door Holders ............................................................................................................. 06.150
Check Chains............................................................................................................. 06.160
DOOR ACCESSORIES
Mail Slots ................................................................................................................... 06.200
Signage ..................................................................................................................... 06.220
BOLTS & HASPS
Flush Bolts ................................................................................................................. 06.300
Surface Bolts .............................................................................................................. 06.320
Tower & Barrel Bolts .................................................................................................. 06.330
Padbolts & Gate Latches ............................................................................................ 06.340
Safety Hasps .............................................................................................................. 06.350
TRIMMER HARDWARE
Closet Hardware ........................................................................................................ 06.510
Wardrobe Hooks........................................................................................................ 06.520
Handrail Brackets ....................................................................................................... 06.530
Door Catches & Latches ............................................................................................. 06.540
LAVATORY HARDWARE
Lavatory Partition ....................................................................................................... 06.600
CABINET HARDWARE
Magnetic Catches ...................................................................................................... 06.700
Ball & Roller Catches .................................................................................................. 06.710
Reinforcement Hardware ........................................................................................... 06.740
SLIDING HARDWARE
Sliding Door Hardware ............................................................................................... 06.810
By-Pass Door Hardware .............................................................................................. 06.820
Bi-Fold Door Hardare ................................................................................................. 06.830
Sliding Tracks ............................................................................................................. 06.840
Accessories ................................................................................................................ 06.850
WINDOW HARDWARE
Window Catches & Latches ........................................................................................ 06.900
Window Hardware, Cremone .................................................................................... 06.910
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV. 2020-08.i
R20210511
GENERAL HARDWARE FINISH GUIDE
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-12. ii
ALL FINISHES IMAGES ABOVE ARE PHOTOGRAPHIC OR COLOUR APPROXIMATIONS, DELIVERED PRODUCT MAY VARY. OTHER FINISHES AVAILABLE–PLEASE CONTACT. (*) EQUIVALENT; CODES DIFFER DEPENDING ON BASE MATERIAL
PRIME COATED BLACK JAPANNED / LACQ. MATTE BLACK LACQUER ZINC PLATED YELLOW ZINC PLATED
CODE CP C1B, KJ C1D C2G, ZP C2GY, YZ
BHMA* 600 601 693 603
POLISHED BRASS MIRROR POLISHED BRASS SATIN BRASS ANTIQUE BRASS SATIN BRONZECODE BP, BP032, C3, 3 C3M, 3M C4, 4, SDB AB, C5, 5 C10, 10
BHMA* 605, 632 633 609, 638 639
OIL RUBBED BRONZE POLISHED NICKEL SATIN NICKEL ANTIQUE NICKEL MATTE BLACKCODE C10B, 10B NP, C14, 14 SDN, SN, C15, 15 AN, C15A, 15A C19, 19
BHMA* 640 645 619, 646 620, 647 622, 631
DARK BRONZE POLISHED CHROME SATIN CHROME POLISHED STAINLESS STEEL SATIN STAINLESS STEELCODE BLR, DU, C20D, 20D CHR, C26, 26 SC, C26D, 26D C32, 32 SS, ST, C32D, 32D
BHMA* 383, 393 625, 651 626, 652 629 630
ALUMINUM PLAIN STEEL, NO FINISHCODE AL, C28, 28 PS
BHMA* 628, 689
ALMOND WHITE LIGHT BRONZE EPOXY BLACK EPOXY WHITE SATIN WHITECODE ALMOND, AW BZ EXB EXW WSILK
BHMA*
WHITE BROWN SILVER PAINT GOLD PAINTCODE WH, WHITE B SL GD
BHMA*
PAINTED
GENERAL HARDWARE ABBREVIATION GUIDE
GENERALBS BacksetDIA, ø DiameterKG KilogramsLBS PoundsLH Left handLHR Left hand reversedMAX MaximumMIN MinimumN/A, — Not applicable / Not availableQTY Quantity (usually followed by notes)RH Right handRHR Right hand reversedSQ, SquareWT Weight
/UNIT Number of items per basic unit of sale (bagged or boxed)
/BOX, /BAG Number of UNITS found in an inner carton or bag
/CASE Number of BOXES or UNITS found in an outer (shipping) carton
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. © CANAROPA - REV.2020-01iii
DOOR PULLSGENERAL HARDWARE
06.010ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
18R-B • For wood or metal doors 133⁄8 8 – 211⁄44" (35 –57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 –13 mm) thick • Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
MODEL TYPE1 FINISH A B C D /BOX
18R12B B, S-630,-19*
111313⁄1616
(300)133⁄44(44)
1299⁄1616
(319)
33⁄44(19)
(B) 1 pair(S) 1 single
18R16B B, S-630,-19*
15 33⁄4 4
(400)133⁄44(44)
1611⁄22(419)
33⁄44(19)
(B) 1 pair(S) 1 single
18R24B B, S-630,-19*
23 55⁄8 8
(600)133⁄44(44)
2433⁄88(619)
33⁄44(19)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
MODEL TYPE1 FINISH A B C D /BOX
18R24E B, S-630,-19*
24(610)
277⁄1616
(62)2511⁄44(641)
111⁄44(32)
(B) 1 pair(S) 1 single
18R36E B, S-630,-19*
36(915)
277⁄1616
(62)3711⁄44(946)
111⁄44(32)
(B) 1 pair(S) 1 single
18R48E B, S-630,-19*
48(1220)
277⁄1616
(62)4911⁄44
(1251)111⁄44(32)
(B) 1 pair(S) 1 single
18R60E* B, S-630,-19
60(1524)
277⁄1616
(62)6111⁄44
(1556)111⁄44(32)
(B) 1 pair(S) 1 single
18R72E* B, S-630,-19
72(1829)
277⁄1616
(62)7311⁄44
(1861)111⁄44(32)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
18R12BS-630
18R-E • For wood or metal doors 133⁄8 8 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 –13 mm) thick • Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
33⁄44"19 mm
111⁄44"32 mm
MITERED DOOR PULLS – ROUND 18R
18R24ES-630
D
AC
B
D
AC
B
Ø
Ø
• For wood or metal doors 133⁄8 8 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 –13 mm) thick • Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
D
AC
B
E
111⁄44"32 mm
MODEL TYPE1 FINISH A B C D E /BOX
18Q24E B, S-630,-19*
24(610)
277⁄1616
(62)2511⁄44(641)
111⁄44(32)
111⁄44(32)
(B) 1 pair(S) 1 single
18Q36E B, S-630,-19*
36(915)
277⁄1616
(62)3711⁄44(946)
111⁄44(32)
111⁄44(32)
(B) 1 pair(S) 1 single
18Q48E B, S-630,-19*
48(1220)
277⁄1616
(62)4911⁄44
(1251)111⁄44(32)
111⁄44(32)
(B) 1 pair(S) 1 single
18Q60E B, S-630,-19*
60(1524)
277⁄1616
(62)6111⁄44
(1556)111⁄44(32)
111⁄44(32)
(B) 1 pair(S) 1 single
18Q72E* B, S-630,-19
72(1829)
277⁄1616
(62)7311⁄44
(1861)111⁄44(32)
111⁄44(32)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
DOOR PULLSGENERAL HARDWARE
MITERED DOOR PULLS – SQUARE 18Q
18Q24ES-630
06.011 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
• For wood or metal doors 133⁄8 8 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 –13 mm) thick • Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
MODEL TYPE1 FINISH A B C D E /BOX
18T24F B, S-630,-19*
24(610)
255⁄88(67)
25 (635)
111⁄22(38)
1(25.4)
(B) 1 pair(S) 1 single
18T36F B, S-630,-19*
36(915)
255⁄88(67)
37 (940)
111⁄22(38)
1(25.4)
(B) 1 pair(S) 1 single
18T48F B, S-630,-19*
48(1220)
255⁄88(67)
49(1245)
111⁄22(38)
1(25.4)
(B) 1 pair(S) 1 single
18T60F* B, S-630,-19
60(1524)
255⁄88(67)
61(1549)
111⁄22(38)
1(25.4)
(B) 1 pair(S) 1 single
18T72F* B, S-630,-19
72(1829)
255⁄88(67)
73(1854)
111⁄22(38)
1(25.4)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
111⁄22 x 1"38 x 25.4 mm
MITERED DOOR PULL – RECTANGULAR 18T
DOOR PULLSGENERAL HARDWARE
D
AC
B
E
06.012ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
DOOR PULLSGENERAL HARDWARE
LADDER TYPE DOOR PULLS – ROUND 19R
19R-B • For wood or metal doors 133⁄8 8 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 –13 mm) thick • Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
MODEL TYPE1 FINISH A B C D /BOX
19R12B B, S-630,-19*
111313⁄1616
(300)111⁄22(38)
1733⁄44(450)
33⁄44(19)
(B) 1 pair(S) 1 single
19R16B B, S-630,-19*
1533⁄44(400)
111⁄22(38)
2155⁄88(550)
33⁄44(19)
(B) 1 pair(S) 1 single
19R22B B, S-630,-19*
2155⁄88(550)
111⁄22(38)
2799⁄1616
(700)
33⁄44(19)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
MODEL TYPE1 FINISH A B C D /BOX
19R12E B, S-630,-19*
12(305)
277⁄1616
(62)24
(610)111⁄44(32)
(B) 1 pair(S) 1 single
19R24E B, S-630,-19*
24(610)
277⁄1616
(62)36
(915)111⁄44(32)
(B) 1 pair(S) 1 single
19R36E B, S-630,-19
36(915)
277⁄1616
(62)48
(1220)111⁄44(32)
(B) 1 pair(S) 1 single
19R48E B, S-630,-19
48(1220)
277⁄1616
(62)60
(1524)111⁄44(32)
(B) 1 pair(S) 1 single
19R60E* B, S-630,-19
60(1524)
277⁄1616
(62)72
(1829)111⁄44(32)
(B) 1 pair(S) 1 single
19R72E* B, S-630,-19
72(1829)
277⁄1616
(62)84
(2134)111⁄44(32)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
19R12BS-630
19R-E • For wood or metal doors 133⁄88 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 – 13 mm) thick• Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
33⁄44"19 mm
111⁄44"32 mm
19R12ES-630
C
D
A
B
C
D
A
B
Ø
Ø
06.013 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
• For wood or metal doors 133⁄88 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 – 13 mm) thick• Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
111⁄44"32 mm
MODEL TYPE1 FINISH A B C D /BOX
19Q12E B, S-630,-19*
12(305)
277⁄1616
(62)24
(610)111⁄44(32)
(B) 1 pair(S) 1 single
19Q24E B, S-630,-19*
24(610)
277⁄1616
(62)36
(915)111⁄44(32)
(B) 1 pair(S) 1 single
19Q36E B, S-630,-19*
36(915)
277⁄1616
(62)48
(1220)111⁄44(32)
(B) 1 pair(S) 1 single
19Q48E B, S-630,-19*
48(1220)
277⁄1616
(62)60
(1524)111⁄44(32)
(B) 1 pair(S) 1 single
19Q60E* B, S-630,-19
60(1524)
277⁄1616
(62)72
(1829)111⁄44(32)
(B) 1 pair(S) 1 single
19Q72E* B, S-630,-19
72(1829)
277⁄1616
(62)84
(2134)111⁄44(32)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
C
D
A
B
DOOR PULLSGENERAL HARDWARE
LADDER TYPE DOOR PULL – SQUARE 19Q
19Q12ES-630
06.014ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
20R10ES-630
• For wood or metal doors 133⁄88 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 – 13 mm) thick• Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
• For wood or metal doors 133⁄88 – 211⁄44" (35 – 57 mm) thick• For glass doors 55⁄1616 – 11⁄22" (8 – 13 mm) thick• Stainless steel• Available in paired or single pulls• Single pulls are thru-bolt mounted with round end-caps• All necessary mounting hardware included
• Can be installed on 2" (51 mm) aluminum doors and frame with 11⁄22" (12.7 mm) door stop
MODEL TYPE1 FINISH A B C D E /BOX
20R10E B, S-630,-19*
10(254)
277⁄1616
(62)1111⁄44(286)
4(102)
111⁄44(32)
(B) 1 pair(S) 1 single
20R24E B, S-630,-19*
24(609.6)
277⁄1616
(62)2511⁄44(641)
4(102)
111⁄44(32)
(B) 1 pair(S) 1 single
20R36E B, S-630,-19*
36(914.4)
277⁄1616
(62)3711⁄44(946)
4(102)
111⁄44(32)
(B) 1 pair(S) 1 single
20R48E B, S-630,-19*
48(1219.2)
277⁄1616
(62)4911⁄44
(1251)4
(102)111⁄44(32)
(B) 1 pair(S) 1 single
20R60E* B, S-630,-19
60(1524)
277⁄1616
(62)6111⁄44
(1556)4
(102)111⁄44(32)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
MODEL TYPE1 FINISH A B C D E F /BOX
20T10E B, S-630,-19*
10(254)
21111⁄1616
(68)1111⁄44(286)
4(102)
33⁄44(19)
111⁄44(32)
(B) 1 pair(S) 1 single
20T24E B, S-630,-19*
24(609.6)
21111⁄1616
(68)2511⁄44(641)
4(102)
33⁄44(19)
111⁄44(32)
(B) 1 pair(S) 1 single
20T36E B, S-630,-19*
36(914.4)
21111⁄1616
(68)3711⁄44(946)
4(102)
33⁄44(19)
111⁄44(32)
(B) 1 pair(S) 1 single
20T48E B, S-630,-19*
48(1219.2)
21111⁄1616
(68)4911⁄44
(1251)4
(102)
33⁄44(19)
111⁄44(32)
(B) 1 pair(S) 1 single
20T60E B, S-630,-19*
60(1524)
21111⁄1616
(68)6111⁄44
(1556)4
(102)
33⁄44(19)
111⁄44(32)
(B) 1 pair(S) 1 single
IN (MM) (1) B– PAIRED PULLS S–SINGLE PULL (*) SPECIAL ORDER
AC
B
D
E
E
111⁄44"32 mm
AC
B
D
F
E
1 11⁄44 x 33⁄44"32 x 19 mm
06.015 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
DOOR PULLSGENERAL HARDWARE
OFFSET DOOR PULL – ROUND 20R
OFFSET DOOR PULL – SQUARE 20T
20T10ES-630
Ø
06.020
• For wood doors and panels• Press fit mounting• Stainless steel with plastic components• Available with or without spring cover
Dimensions for reference only. Please request samples prior to door preparation.
MODEL FINISH A B C D E F G
FP410-135-629, -630
555⁄1616
(135)233⁄44(70)
1111⁄1616
(17)31515⁄1616
(100)1
(25)41515⁄1616
(125)11313⁄1616
(46)
FP412-135-629,-630
555⁄1616
(135)233⁄1616
(55)
1111⁄1616
(17)31515⁄1616
(100)1
(25)41515⁄1616
(125)11313⁄1616
(46)
FP412-135B -630555⁄1616
(135)233⁄1616
(55)
77⁄1616
(11.5)31515⁄1616
(100)1
(25)411⁄22
(114.5)111⁄44(32)
FP414-60-629,-630
233⁄88(60)
233⁄88(60)
1111⁄1616
(17)133⁄1616
(30)133⁄1616
(30)2
(50)2
(50)
FP416-300-629,-630
111313⁄1616
(300)233⁄1616
(55)
1111⁄1616
(17)1
(25)1
(25)1077⁄88(276)
11313⁄1616
(46)
IN (MM)
B
E
C
A D
F
G
FP414
FP410 FP416FP412
FLUSH PULLSGENERAL HARDWARE
FLUSH PULLS FP
BACK
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-11.
06.021
FP223R FP223 FP224 FP225
• For wood doors• Stainless steel • Round mounting hole with square or round face• Square, round or offset finger opening• Back-to-back mounting possible
Dimensions for reference only. Please request samples prior to door preparation.
MODEL FINISH A B C D
FP223R-64 -630211⁄2 X 2 X 211⁄2 2
(64 x 64)133⁄44(45)
211⁄88(54)
11⁄22(12.7)
FP223-50 -6302 X X 2
(50 x 50)1 X X 1
(26 x 26) 199⁄1616
(40)
77⁄1616
(11.5)
FP223-70 -630233⁄4 X 4 X 233⁄4 4
(70 x 70)199⁄16 X 16 X 199⁄16 16
(40 x 40)233⁄88(60)
11⁄22(13.2)
FP224-70 -630233⁄4 X 4 X 233⁄4 4
(70 x 70)199⁄16 X 16 X 1
(40 x 25)233⁄88(60)
55⁄88(15)
FP224-110 -630455⁄16 X 16 X 455⁄16 16
(110 x 110)21111⁄16 X 16 X 155⁄16 16
(68 x 34)4
(102)
55⁄88(15)
FP225-50 -6302
(50)111⁄44(31)
199⁄1616
(40)
77⁄1616
(10.7)
FP225-70 -630233⁄44(70)
2(50)
233⁄88(60)
11⁄22(13.2)
FP225-110 -630455⁄1616
(110)333⁄88(86)
4(102)
99⁄1616
(14)
IN (MM)
MODEL FINISH A B C D E F G
FP227-120 -63041111⁄1616
(120)155⁄88(40)
77⁄1616
(11)355⁄1616
(85)
77⁄88(22)
355⁄88(92)
155⁄1616
(27)
FP228-120 -63041111⁄1616
(120)155⁄88(40)
77⁄1616
(11)355⁄1616
(85)
77⁄88(22)
355⁄88(92)
155⁄1616
(27)
FP231-180 -63061111⁄1616
(175)233⁄88(60)
99⁄1616
(14)511⁄22
(140)111⁄1616
(26)51313⁄1616
(148)177⁄1616
(37)
IN (MM)
D
B C
A
C
F
B
A
G
DE
FP227 FP228 FP231
FLUSH PULLSGENERAL HARDWARE
FLUSH PULLS – ROUND MOUNTING FP
ø
ø
ø
ø
ø
ø
ø
ø
FLUSH PULLS – OVAL FP
• For wood doors• Stainless steel • Back-to-back mounting possible
Dimensions for reference only. Please request samples prior to door preparation.
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
• For wood doors• Steel• Fasteners NOT included
MODEL FINISH A B C CUT-OUT DIMENSION / BOX
4100SS Stainless steel411⁄22
(114)155⁄88(40)
11⁄22(12.7)
155⁄1616 x 333⁄44 x 55⁄88(33.3 x 95 x 15.9) 25
IN (MM)
A
BC
2530C26
3503-26D
4100SS
FLUSH PULLSGENERAL HARDWARE
06.022
MISCELLANEOUS FLUSH PULLS
AB
C
A
BC
MODEL FINISH A B C CUT-OUT DIMENSION / BOX
2530BP, C15, C15A, C19, C26, CHR, C26D
411⁄22(114)
155⁄88(40)
11⁄22(12.7)
155⁄1616 x 311⁄22 x 11⁄22(33.3 x 89 x 12.7) 50
IN (MM)
MODEL FINISH A B C CUT-OUT DIMENSION / BOX
3503 15, 19, 26, 26D277⁄1616
(62)277⁄6464
(53.5)
33⁄88(9.5)
211⁄88 DIA x 11⁄22(54 DIA x 12.7) 150
IN (MM)
• For wood doors• Steel• Wood screws included
• For wood doors• Stainless steel• Fasteners NOT included
ø ø
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-12.
MODEL FINISH MATERIAL A B C D E
EP310-30 -630 Stainless Steel133⁄1616
(30)
33⁄44(19.5)
1(25)
1313⁄1616
(20.5)
33⁄1616
(4.5)
IN (MM)
MODEL FINISH MATERIAL A B C D
EP316-30 -619 Brass133⁄1616
(30)
1111⁄1616
(17)1
(25)
33⁄44(20.5)
IN (MM)
A C
B
E
D
A C
B
D
• Brass• Wood screws included
MODEL FINISH MATERIAL A B C D E / BOX
3512 -32D Brass377⁄88(98)
33⁄44(19.1)
55⁄6464
(2)199⁄1616
(39.6)111⁄44
(31.8)25
IN (MM)
B
A
E
D
C
EDGE PULLSGENERAL HARDWARE
EDGE PULLS EP310, EP316, EP312, 3512
06.030
ø
ø
ø
ø
ø
ø
ø
MODEL FINISH MATERIAL A B C D E F
EP312-154 -630 Stainless Steel633⁄1616
(158)133⁄1616
(30)
55⁄88(16)
51313⁄1616
(151)1
(25)355⁄1616
(84)
IN (MM)
DA
BC
E F
• For wood panels• Stainless steel• Wood screws included
• For wood panels• Brass• Press-fit
• For wood panels or doors• Stainless steel
BACK
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2021-05
MODEL FINISH MATERIAL A B C / BOX
3520C3, C5, C15,
C15A, C19, C26, C26D
Zinc die-cast111⁄44
(31.8)155⁄88
(41.3)133⁄44
(44.5)50
IN (MM)
MODEL FINISH MATERIAL A B C D
3521C15, C19, C26,
C26DZinc die-cast
111⁄44(31.8)
1111⁄1616
(17)1
(25)
33⁄44(20.5)
IN (MM)
A
B
C
A
B
C
• For 133⁄88" (35 mm) thick doors
• For 133⁄88" (35mm) thick doors
OTHER PULLSGENERAL HARDWARE
06.040
BI-FOLD DOOR PULLS 3520, 3521
MULTI-PURPOSE STEEL PULL H2381CHR
MODEL FINISH MATERIAL A B C / BOX
H2381CHR3 Chrome Plated Steel3
(76)
33⁄44(19)
33⁄44(19.1)
12
H2381CHR8 Chrome Plated Steel8
(203)211⁄44(57)
2(50.8)
10
IN (MM)
A
B C
• Available in 3" (76 mm) and 8" (203 mm) lengths• Fasteners not included
ø ø
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
MODEL FINISH MATERIAL A B C / BOX
328ZP Zinc Plated Steel611⁄44
(159)111⁄22
(38.1)155⁄88
(41.3)20
IN (MM)
MODEL FINISH MATERIAL A B / BOX
2535ZP Zinc Plated Steel411⁄88
(105)311⁄88(79)
20
IN (MM)
A
B
C
B
A
OTHER PULLSGENERAL HARDWARE
611⁄22" MULTI-PURPOSE STEEL PULL 328ZP
• Fasteners not included
SURFACE MOUNTED CHEST HANDLE 2535ZP
• Fasteners not included
06.041 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03
06.050
H1410H1411
14R09P-32D
• Aluminum door pull and plate• D-Type pull• Handle available separately (with fasteners)• Supplied with six # 6 x 33⁄44" (19.1 mm) long wood screws, two
11⁄44-20 UNC x 233⁄88" (60 mm) long machine screws and cup-washers
• Stainless steel door pull and plate• Round pull• Handle available separately (with fasteners)• Supplied with six # 6 x 33⁄44" (19.1 mm) long wood screws, two
11⁄44-20 UNC x 233⁄88" (60 mm) long machine screws and cup-washers
MODEL FINISH A B C D E F / CASE
H1410 Aluminum4
(102)16
(406)9
(229)2
(50.8)
1515⁄3232
(12)111⁄1616
(26.9)32
H1411 Aluminum311⁄22(89)
15(381)
7(178)
2(50.8)
1515⁄3232
(12)111⁄1616
(26.9)40
IN (MM)
MODEL FINISH A B C D E / CASE
14R09P 32D4
(102)16
(406)9
(229)211⁄44(57)
33⁄44(19)
20
IN (MM)
A
F
B C
E
D
A
B C
E
D
DOOR PULLS & PLATESGENERAL HARDWARE
ALUMINUM DOOR PULL AND PLATE H1410, H1411
1"25 mm
STAINLESS STEEL DOOR PULL AND PLATE 14R09P
33⁄44"19 mm
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03
H1412H1413
14R09-32D
• Aluminum door pull• D-Type pull• Pull supplied with two 11⁄44-20 UNC x 233⁄88" (60 mm) long
machine screws and cup-washers
• Stainless steel door pull• Round pull• Pull supplied with two 11⁄44-20 UNC x 233⁄88" (60 mm) long
machine screws and cup-washers
MODEL FINISH A B C / CASE
H1412 Aluminum2
(50.8)1
(25)7
(178)20
H1413 Aluminum2
(50.8)1
(25)9
(229)20
IN (MM)
MODEL FINISH A B C / CASE
14R09 32D211⁄44(57)
33⁄44(19.1)
9(229)
20
IN (MM)
MODEL FINISH MATERIAL A B C
130315 AL
32D
BP
Aluminum
Stainless steel
Brass
311⁄22(89)
15(381)
7(177.8)
1304164
(102)16
(406)9
(228.6)
IN (MM)
BA
C
B
C
A
• Back plate for commercial pulls• Mounting hardware included: wood screws
A
B C
DOOR PULLS & PLATESGENERAL HARDWARE
ALUMINUM DOOR PULL H1412, H1413
1"25 mm
STAINLESS STEEL DOOR PULL 14R09P
33⁄44"19 mm
PULL BACK PLATE 130315, 130416
06.051 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
140315 AL
151234-32D
06.060
• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B
140315 AL
BP032
-32D
Aluminum
Brass
Stainless steel
311⁄22(89)
15(381)
1404164
(102)16
(406)
140520AL
-32D
Aluminum
Stainless steel5
(127)20
(508)
IN (MM)
MODEL FINISH MATERIAL A B
150630
BP032 Brass
6(152)
3011⁄22(775)
1506326
(152)3211⁄22(826)
1506346
(152)3411⁄22(876)
150828
AL
BP032
-32D
Aluminum
Brass
Stainless steel
8(203)
2811⁄22(724)
1508308
(203)3011⁄22(775)
1508328
(203)3211⁄22(826)
1508348
(203)3411⁄22(876)
1508428
(203)4211⁄22
(1080)
151028
AL
BP032
-32D
Aluminum
Brass
Stainless steel
10(254)
2811⁄22(724)
15103010
(254)3011⁄22(775)
15103210
(254)3211⁄22(826)
15103410
(254)3411⁄22(876)
151234
AL
BP032
-32D
Aluminum
Brass
Stainless steel
12(305)
3411⁄22(876)
IN (MM)
A
B
A
B
PUSH & KICK PLATESGENERAL HARDWARE
PUSH PLATES 1403, 1404, 1405
KICK PLATES 1506, 1508, 1510, 1512
• Mounting hardware included: wood screws
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03
06.110
FLOOR STOPSGENERAL HARDWARE
• For use with low or no threshold • Heavy-duty zinc die-cast• Non-marking rubber stop• Mounting hardware included: wood screw and plastic
anchor
• #T201 Riser allows easy conversion to threshold or carpet use
MODEL FINISH A B ø C D E ø F / BOX / CASE
T200C26D, C3, C4
1 (25.4)
77⁄88 (22.2)
133⁄44(44.5)
33⁄44(19.1)
33⁄3232
(2.4)
33⁄1616
(4.8)10 200
T201 C26D — —133⁄44
(44.5)—
11⁄44(6.4)
— 50 500
IN (MM)
T201 C26DRISER
A
B
C
ED
FT200 C26D
DOME STOP – LOW T201
MODEL FINISH A B ø C D E ø F / BOX / CASE
T218C26D, C3, C4
177⁄1616
(36.5)
77⁄88 (22.2)
133⁄44(44.5)
33⁄44(19.1)
11⁄22(12.7)
33⁄1616
(4.8)10 200
IN (MM)
• For use with a threshold or undercut doors • Heavy-duty zinc die-cast• Non-marking rubber stop• Includes wood screw and plastic anchorA
B
C
E
DF
T218 C26D
DOME STOP – HIGH T218
MODEL FINISH A B ø C D E ø F / BOX / CASE
C229 C26D177⁄1616
(36.5)
1313⁄1616 (20.6)
133⁄44(44.5)
77⁄1616
(11)
1 1⁄88(3.2)
77⁄3232
(5.6)10 200
IN (MM)
• For use with or without threshold • Heavy-duty zinc die-cast• Non-marking rubber stop• Mounting hardware included: wood screw and plastic anchor
A
B
C
ED
F
C229 C26D
DOME STOP – UNIVERSAL C229
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
FLOOR STOPSGENERAL HARDWARE
SPRING STOP – UNIVERSAL C230
• For interior use with or without threshold • Zinc die-cast body• Spring loaded non-marking rubber stop• Mounting hardware included: wood screw and anchor
C230-26D
A
B
C
E
D
F
MODEL FINISH A B ø C D E ø F / BOX
C230 19, 26D111⁄22(38)
1515⁄1616
(24)177⁄88
(47.4)
1313⁄1616
(21)
77⁄3232
(6)
77⁄3232
(5.6)100
IN (MM)
06.111 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03.
MODEL FINISH A ø B C / BOX
R470 C10B, C26D, C3211⁄22 (64)
233⁄1616 (56)
155⁄1616 (33.3)
12
R471 C26D, C3211⁄22 (64)
233⁄1616 (56)
155⁄1616 (33.3)
12
IN (MM)
A
B
C
• For exterior / interior use• Solid brass• Non-marking rubber tip• Mounting hardware included: #R470 - wood screws #R471 - lead shielding, masonry anchor, wood screws #R470REP - Replacement rubber tip
FLOOR-MOUNTED DOOR STOP R470, R471
R470 C26D
FLOOR STOPSGENERAL HARDWARE
• For interior use• Omni-directional stop• Solid brass • Mounting hardware included: wood and machine screws
with masonry and plastic anchors
MODEL FINISH A ø B ø C D / BOX
3531 26D11717⁄3232 (39)
133⁄1616 (30.2)
133⁄88 (35)
199⁄6464
(29)10
IN (MM)
MODEL FINISH A ø B ø C D / BOX
3532 32D2
(50.8)133⁄1616
(30.2)133⁄88 (35)
133⁄88 (35)
10
IN (MM)
A
D C
B
3531-26D
• For interior or exterior use• Omni-directional stop• Stainless steel • Mounting hardware included: threaded bolt with
masonry anchorA
B
C
D
3532-32D
COLUMN DOOR STOP 3530
• For interior use• Omni-directional stop• Solid brass • Mounting hardware included: wood screw with
plastic anchor
3530-26D MODEL FINISH A ø B ø C D / BOX
3530 26D, 19133⁄44
(44.5)133⁄1616
(30.2)177⁄1616
(36.5)111⁄1616 (28)
10
IN (MM)
COLUMN DOOR STOP 3532
A
D C
B
COLUMN DOOR STOP 3531
06.112ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
FLOOR STOPSGENERAL HARDWARE
SQUARE DOOR STOP 3536
• For interior use• Stainless steel, satin finish• Mounting hardware included: wood screw and anchor
MODEL FINISH A B C D / UNIT
3536 630199⁄1616
(40)1
(25)199⁄1616
(40)
99⁄1616
(14)1
IN (MM)
06.113
3536-630
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03.
A
B
DC
• For interior use• Flexible steel spring• Mounting hardware included: wood screw
• For interior use• Solid brass or zinc die-cast• Integrated wood screw
MODEL FINISH ø A B / BOX / CASE
615C11P, C15, C15A, C3
1515⁄1616 (23.8)
3 (76)
50 600
3515C11P, C15, C15A, C26, C26D, C3, C5
1515⁄1616 (23.8)
3 (76)
50 500
3515 C191515⁄1616
(23.8)333⁄88(86)
— 300
3555 C15111⁄1616
(26.9)4
(102)50 500
IN (MM)
MODEL FINISH MATERIAL ø A B / BOX / CASE
692 BP Zinc die-cast1313⁄1616
(20.6)2 77⁄88(73)
50 —
6131C10B, C15, C15A, C26, C26D, C3
Solid brass1
(25.4)3
(76)25 250
IN (MM)
692 BP
6131 C15
A
B
A
B
A
B
WALL STOPSGENERAL HARDWARE
FLEXIBLE WALL-MOUNTED DOOR STOPS 615, 3515, 3555
RIGID WALL-MOUNTED DOOR STOP 692
06.120
RIGID WALL-MOUNTED DOOR STOP - SQUARE 3538
• For interior use• Stainless steel, satin finish• Concealed mounting screws• Mounting hardware included: wood screw and
plastic anchors
MODEL FINISH A B C / UNIT
3538 63012727⁄3232
(46.5)355⁄3232
(80)
33⁄44(19)
1
IN (MM)
3538-630
3515 C15
615 C15
3515 C19
3555 C15
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-06.
A
B
C
WALL STOPSGENERAL HARDWARE
• Zinc die-cast• Non-marking rubber• Concealed mounting screws• Mounting hardware included: wood screw, drywall anchors
MODEL FINISH A ø B ø C D / BOX /CASE
T231 C3, C26D55⁄1616
(7.9)2 11⁄22 (64)
155⁄1616 (33.3)
1(25.4)
25 250
T233 C3, C26D55⁄1616
(7.9)211⁄22 (64)
155⁄1616 (33.3)
1(25.4)
25 250
IN (MM)
MODEL FINISH A ø B C / BOX
64BU Zinc plated1515⁄1616
(23.8)155⁄88
(41.3)155⁄1616
(33.3)20
IN (MM)
A
B C
D
A
B C
D
T231 C26D T233 C26D
• Floor or wall mountable• Non-marking rubber with steel support• Mounting hardware included: wood screw
A
B
C
64BU
CONVEX & CONCAVE WALL-MOUNTED DOOR STOP T231, T233
DOOR BUMPER 64BU
• For exterior / interior use• Solid brass• Non-marking rubber tip• Mounting hardware included: #R474 - wood screws #R475 - lead shielding, masonry anchor, wood screws
#R470REP - Replacement rubber tip
MODEL FINISH A ø B / BOX
R474 C3, C26D311⁄22 (89)
233⁄1616 (56)
12
R475 C26D311⁄22 (89)
233⁄1616 (56)
12
IN (MM)
R474 C26D
06.121
WALL-MOUNTED DOOR STOP R474, R475
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-03.
A
B
06.130ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
805• For use on hinged doors• Adjustable door opening angle• Fits 11⁄44" (6.4 mm) diameter hinge pin
3506• For use on hinged doors• Adjustable door opening angle• Removable nylon bushing• Fits 1515⁄6464" (6 mm) and 1919⁄6464" (7.5 mm) diameter hinge pins
HINGE PIN STOPSGENERAL HARDWARE
MODEL FINISH A B C D E / BOX
805 Brass plated155⁄88
(41.3)155⁄88
(41.3)111⁄88
(28.6)155⁄88
(41.5)
11⁄44(5.4)
25
3506C3, C11P, C15, C15A, C26D
155⁄88(41.3)
2(50.8)
111⁄88(28.6)
11515⁄1616
(49.2)
55⁄88(15.9)
25
IN (MM)
805
3506C15
EDIA
A
B
D
C
HINGE PIN STOPS 805, 3506
MODEL FINISH A B C D ø E / BOX
3508 C15A, C26D177⁄1616
(36.5)177⁄88
(47.6)111⁄44
(31.8)11515⁄1616
(49.2)
11⁄44(6.4)
50
IN (MM)
3508C15A
• For use on hinged doors• Adjustable door opening angle• Zinc die-cast body• Fits 11⁄44" (6.4 mm) diameter hinge pin
EDIA
A
B
D
C
HINGE PIN STOP 3508
MODEL FINISH A B C D ø E / BOX
3507C3, C11P, C15, C15A, C26D
177⁄1616
(36.5)177⁄88
(47.6)111⁄88
(28.6)2
(50.8)
1515⁄6464
(7.5)50
IN (MM)
• For use on hinged doors• Adjustable door opening angle• Removable nylon brushing• Fits 1515⁄6464" (6 mm) and 1919⁄6464" (7.5 mm) diameter hinge pins• Zinc die-cast body• Self-pivoting shoe
3507C15
A
B
D
C
EDIA
HINGE PIN STOP – PIVOTING SHOE 3507
06.131 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-08.
MODEL FINISH A B / BOX
3509C11P, C15, C15A, C19, C26D
211⁄1616 (52)
111⁄22(38)
25
IN (MM)
3509
• For use on hinged doors• Positive slip-proof adjustment• 95 - 130° door opening adjustment• Removable plastic bushing• Fits 6 mm diameter hinge pins• All steel construction• Non-marring rubber tips
A
B
HINGE PIN STOPSGENERAL HARDWARE
HINGE PIN STOP – HEAVY DUTY 3509
06.140
MODEL FINISH A ø B C D / BOX
R472 C26D, C3211⁄22 (64)
233⁄1616 (56)
155⁄1616 (33.3)
233⁄44 (70)
10
R473 C26D, C3211⁄22 (64)
233⁄1616 (56)
155⁄1616 (33.3)
233⁄44 (70)
10
IN (MM)
MODEL FINISH A ø B C D / BOX
DC540 Satin chrome2
(50.8)133⁄44
(44.5)133⁄3232 (28)
133⁄44 (44.5)
10
DC540W Satin chrome2
(50.8)133⁄44
(44.5)133⁄3232 (28)
133⁄44 (44.5)
10
IN (MM)
D
A
B
C
R472 C26D
DC540
• For exterior / interior use• Solid brass• Non-marking rubber tip• Mounting hardware included: #R472 - wood screws #R473 - lead shielding, masonry anchor, wood screws
#R470REP - Replacement rubber tip
• For heavy-duty interior / exterior use• Heavy-duty zinc die-cast• Non-marking rubber tip• Concealed mounting• Mounting hardware included: #DC540 - masonry anchor, wood screws #DC540W - wood screws
#R540REP - Replacement rubber tip
A
B
D
C
DOOR STOPS WITH HOLDERGENERAL HARDWARE
FLOOR-MOUNTED DOOR STOP R472, R473
HEAVY DUTY FLOOR-MOUNTED STOP WITH HOOK DC540
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10
• For exterior / interior use• Solid brass• Non-marking rubber tip• Mounting hardware included: #R476 - wood screws #R477 - lead shielding, masonry anchor, wood screws
#R470REP - Replacement rubber tip
• For heavy-duty interior / exterior use• Heavy duty zinc die-cast• Non-marking rubber tip• Conceal mounting• Mounting hardware included: masonry anchors, machine
screws
MODEL FINISH A ø B C / BOX
R476 C3, C26D311⁄22 (89)
233⁄1616 (56)
511⁄44 (133.4)
12
R477 C26D311⁄22 (89)
233⁄1616 (56)
511⁄44 (133.4)
12
IN (MM)
MODEL FINISH A ø B C
DCX20 Satin chrome477⁄88
(124)311⁄22(89)
533⁄44(146)
IN (MM)
DCX20
R476 C26D
AC
D
E
R475R477
B
A
B
C
DOOR STOPS WITH HOLDERGENERAL HARDWARE
06.141
WALL-MOUNTED DOOR STOP R476, R477
HEAVY-DUTY WALL-MOUNTED DOOR STOP WITH HOOK DCX20
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
06.150ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
DOOR HOLDERSGENERAL HARDWARE
• For interior use• Zinc die-cast, steel clamp• Mounting hardware included: wood screws
MODEL FINISH A B C D E F
DC23D Zinc Plated255⁄88(67)
299⁄1616
(65)1
(25.4)211⁄88(54)
11515⁄1616
(49)311⁄88(79)
IN (MM)
A D
BE
F
C
FRICTION DOOR HOLDER – WALL MOUNTED DC23D
MODEL FINISH A B C D E F
DC24D Satin Chrome21515⁄1616
(75)133⁄44
(44.5)
1515⁄1616
(23.8)211⁄88(54)
11515⁄1616
(54)111⁄88
(28.6)
IN (MM)
• For interior use• Zinc die-cast, steel clamp• Mounting hardware included: wood screws
E
F D
B
A
C
FRICTION DOOR HOLDER - FLOOR MOUNTED DC24D
MODEL FINISH A B C D E F G / BOX
DC230 Nickel Plated77⁄88
(22.3)2
(51)
33⁄44(19.1)
211⁄88(54)
211⁄88(54)
233⁄44(70)
133⁄44(44.5)
10
IN (MM)
• For interior use• Cast iron, steel clamp• Mounting hardware included: wood screws
BE
A D
G C
F
FRICTION DOOR HOLDER – WALL MOUNTED DC230
06.151 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-03.
DOOR HOLDERSGENERAL HARDWARE
MODEL FINISH A B C D / BOX
1014.02 Silver Paint433⁄44
(121)1
(25.4)
33⁄88 (9.5)
155⁄88 (41.3)
6
1015.02 Silver Paint611⁄22
(165)133⁄1616
(30.2)
77⁄1616 (11.1)
233⁄88 (60)
6
IN (MM)
1014.02
• Heavy duty zinc die-cast• Non-marking rubber tip
#1024.00 - Replacement rubber tip for #1014.02#1015REP - Replacement rubber tip for #1015.02
A
CD B
PLUNGER TYPE DOOR HOLDER 1014.02
MODEL FINISH A B C D E
1026.02 Silver Paint633⁄44
(172)211⁄22
(63.5)111⁄22
(38.1)233⁄44 (70)
111⁄88 (28.6)
IN (MM)
• Steel construction • Non-marking rubber tip
#1026.00 - Replacement rubber tipA
D
E
B
C
PLUNGER TYPE DOOR HOLDER 1026.02
MODEL FINISH A B C D E
1024.02 Silver Paint433⁄88
(111)211⁄88 (54)
1111⁄1616 (17.5)
133⁄4 4 (44.5)
77⁄88 (22.2)
IN (MM)
• Steel construction• Non-marking rubber tip
#1024.00 - Replacement rubber tipA
CBD
E
PLUNGER TYPE DOOR HOLDER 1024.02
MODEL FINISH MATERIAL A B C D REPLACEMENT TIP SCREWS* /BOX
1060.02 Silver PaintZinc
die-cast5
(127)4
(102)1
(25.4)477⁄88
(124)— — 8
1076.02 Silver Paint Steel411⁄44
(108)233⁄88 (60)
1313⁄1616 (20.6)
411⁄44 (108)
#1076.00 — 10
659-660Satin Stainless
SteelBrass
411⁄1616
(103)2
(50.8)133⁄88
(34.9)333⁄44
(95.25)— — 50
IN (MM) (*) SCREWS NOT INCLUDED
MODEL FINISH MATERIAL A B C D REPLACEMENT TIP SCREWS* /BOX
17 C3, C26DZinc
die-cast5
(127)2
(50.8)133⁄88
(34.9)433⁄44
(121)#17REP Wood 10
18-5 C20D, C26D Brass5
(127)2
(50.8)133⁄88
(34.9)433⁄44
(121)#18REP Wood 12
IN (MM) (*) SCREWS INCLUDED
1060.02
17 C26D
1076.02
18-5 C26D
659-660
A
B
C
D
DOOR HOLDERSGENERAL HARDWARE
06.152ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
KICK-DOWN DOOR HOLDERS 1060, 1076, 659-660, 17, 18-5
A
B
C
D
MODEL FINISH MATERIAL A B C D REPLACEMENT TIP SCREWS* /BOX
604 C2G, C3 Steel4
(102)3
(76)155⁄88
(41.3)377⁄88 (98)
#208G Wood 10
606 C2G, C3 Steel6
(152)3
(76)155⁄88
(41.3)577⁄88
(149)#208G Wood 10
608 C2G Steel8
(203)3
(76)155⁄88
(41.3)777⁄88
(200)#208G Wood 10
610 C2G Steel10
(254)3
(76)155⁄88
(41.3)933⁄44
(248)#208G Wood 10
612 C2G Steel12
(305)3
(76)155⁄88
(41.3)1133⁄44 (298)
#208G Wood 10
IN (MM) (*) SCREWS INCLUDED
604
610
612
608
606
A
B
C
D
DOOR HOLDERSGENERAL HARDWARE
06.153 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-03.
KICK-DOWN DOOR HOLDER 604, 606, 608, 610, 612
• Quality nylon construction• Floor or wall mountable• Concealed mounting• Mounting hardware included: wood screw, masonry nail
• Floor or wall mountable• Zinc die-cast material• Spring loaded stop• Concealed mounting• Mounting hardware included: wood screws
MODEL FINISH A B C D E / CASE
CH401 B, AW211⁄88 (54)
277⁄88 (73)
11111⁄1616 (42.9)
311⁄22 (89)
33⁄44 (19.1)
10
IN (MM)
MDH C26D
A
E
CB
D
A
BD
E
C
MODEL FINISH A B C D E / CASE
MDHC15, C19, C26D, C3
133⁄44(44.5)
3(76)
133⁄1616
(30)355⁄88(93)
33⁄44(19)
10
SMDHC15, C19, C26D, C3
133⁄44(44.5)
3 (76)
133⁄1616
(30)355⁄88(93)
33⁄44(19)
10
IN (MM)
06.154ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
DOOR HOLDERSGENERAL HARDWARE
MAGNETIC DOOR HOLDER AND STOP CH401
MAGNETIC DOOR HOLDER AND STOP MDH, SMDH
06.160ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
CHECK CHAINSGENERAL HARDWARE
• Steel chain• Two tension coil springs• Stamped steel mounting brackets, zinc plated• Mounting hardware included: self-tapping screws
#3550 - Includes grey vinyl cover, with two expansion rings
MODEL FREE LENGTH A B PER BOX
35482411⁄22
(622.3)155⁄1616
(33.3)
77⁄88(22.2)
25
35502711⁄22
(698.5)111⁄44
(31.8)111⁄88
(28.5)10
IN (MM)
3548
3548
3550
3550A
B
A
B
CHECK CHAINS 3548, 3550
MODEL FREE LENGTH A B C PER BOX
356027
(685.8)199⁄1616
(39.7)199⁄1616
(39.7)111⁄88
(28.6)6
356131
(787.4)199⁄1616
(39.7)199⁄1616
(39.7)111⁄88
(28.6)6
IN (MM)
• Heavy-duty welded chain• Two compression coil springs• Zinc die-cast mounting brackets, zinc plated• Grey vinyl cover• Mounting hardware included: self-tapping screws
3560
C
A
B
COMMERCIAL CHECK CHAINS 3560, 3561
MODEL FREE LENGTH A B C PER BOX
35623211⁄22
(825.5)199⁄1616
(39.7)199⁄1616
(39.7)133⁄1616
(30.2)6
IN (MM)
• Extra heavy-duty welded chain• Two heavy-duty coil springs with stainless steel linkage• Brass die-cast mounting brackets, satin chrome finish• Grey textured vinyl cover• Mounting hardware included: self-tapping screws
3562
C
A
B
HEAVY DUTY COMMERCIAL CHECK CHAIN 3562
MAIL SLOTSGENERAL HARDWARE
06.200ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-11A.
• Fully insulated housing; with rotating self-closing aluminum flaps• Fully enclosed air chamber stops drafts, dust and reduces noise• Telescopic housing for doors 133⁄4 4 – 21515⁄1616" (44.5–75 mm) thick
Spacers required for thinner doors (see below)• Available in wide format to accommodate large envelopes• Soft rubber weather exterior seal• Insulating gaskets in all critical areas
INSULATED MAIL SLOT – DELUXE 46100, 46200
# 461001 ................................... Anodized satin silver with black frame and housing
#462001 (wide format)
#461004.................................... Anodized medium bronze with frame and housing#462004 (wide format)
#461005.................................... Anodized dark bronze with black frame and housing
#462005 (wide format)
#461006.................................... Anodized brass with black frame and housing
#462006 (wide format)
#461007.................................... Powder coated white with white frame and housing
#462007 (wide format)
#461010.................................... Powder coated black with black frame and housing
#462010 (wide format)
#461011.................................... Anodized satin nickel with black frame and housing
#462011 (wide format)
46100 46200
(A) Front1277⁄3232 x 355⁄3232 (310 x 80)
1533⁄44 x 355⁄3232
(400 x 80)
(B) Slot Size955⁄3232 x 133⁄1616 (236 x 30)
121313⁄1616 x 133⁄1616
(325 x 30)
(C) Door cut-out
111313⁄1616 x 233⁄44(300 x 70)
1555⁄1616 x 233⁄44(389 x 70)
IN (MM)
AB
C
Rotating self-closing unit protects against drafts and dust.
Telescopic housing for doors 133⁄44–3 in (44 – 75 mm) thick. Spacers required for thinner doors.
When the slot is closed, the cylinder becomes a sealed air-chamber providing excellent thermal insulation.
PVC bearings hold the two quarter circular aluminum sections in position and insulates them.
Front section and rotating unit made of aluminum.
(*) OTHER COLOURS / FINISHES AVAILABLE BY SPECIAL ORDER. PLEASE CONTACT YOUR LOCAL REPRESENTATIVE
THICKNESS (D) 46100 46200
133⁄44 – 21515⁄1616
(44.5–75)— —
133⁄1616 – 21313⁄3232
(30–61)# 46114BLACK # 46114WHITE
# 46214BLACK # 46214WHITE
2121⁄3232 – 177⁄88(17–48)
# 46127BLACK # 46127WHITE
# 46227BLACK # 46227WHITE
IN (MM)
NO SPACER 46114 SPACER46214 SPACER
46127 SPACER46227 SPACER
FRAME SPACERSFor doors less than 133⁄4 4 in (44.5 mm) thick.
D D D
#461012.................................... Matte black with black frame and housing
#462012 (wide format)
INSULATED MAIL SLOT 46500
• Self-closing interior and exterior anodized aluminum flaps• Fully enclosed tough plastic housing• Telescopic housing for doors up to 133⁄44" (44.5 mm) thick;
up to 411⁄44" (108 mm) with extension (sold separately)• Soft rubber weather exterior seal• Insulating gaskets in all critical areas
#465001.................... Aluminum
#465000.................... Slot extension. For doors 133⁄4 4 – 411⁄44" (44.5 –108 mm)
#465000L .................. Screw pack for slot extension
#465005.................... Dark Bronze
#465006.................... Brass
#465007.................... White
MAIL SLOTSGENERAL HARDWARE
AB
C
REGULAR WITH EXTENSION*
(A) Front1177⁄88 x 233⁄44 (302 x 70)
—
(B) Slot Size10 x 111⁄22
(254 x 38)—
(C) Door cut-out
1111⁄88 x 2(280 x 51)
1111⁄44 x 2(286 x 51)
IN (MM) (*) EXTENSION MUST BE USED WITH DOORS OVER 133⁄4 4 IN (44.5 MM) THICK AND SLOT MUST BE CUT WITH FINE-TOOTH SAW.
06.201 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-11.
SIGNAGEGENERAL HARDWARE
06.220
PICTOGRAM SIGNAGE – SMALL S801, S802, S803, S804
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
• Stainless steel pictogram signs• Self-adhesive • Packaged & sold individually
MODEL DESCRIPTION A B
S801-630 Women
21515⁄1616
(75)21515⁄1616
(75)
S802-630 Men
S803-630 Unisex
S804-630 Disabled
IN (MM)
S801 S802
S804S803
B
A
• Stainless steel pictogram signs• Plastic mounting plate • Packaged & sold individually• Wood screws included
MODEL DESCRIPTION A B
S901-630 Women
677⁄1616
(164)677⁄1616
(164)
S902-630 Men
S903-630 Unisex
S904-630 Disabled
IN (MM)
B
A
S901 S902
S903 S904
PICTOGRAM SIGNAGE S901, S902, S903, S904
FLUSH BOLTSGENERAL HARDWARE
06.300ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2021-02.
MANUAL EXTENSION FLUSH BOLT – FIRE RATED FBUL100
• cULus listed for use with hollow metal, metal clad, steel covered composite, flush type sheet or metal swinging type fire doors.
• Not for wood fire doors• Fits metal door preparation per ANSI A115.4-206• Brass and steel components• Throw: 33⁄44" (19 mm)• Adjustable rod up to 77⁄88" (22.2 mm)• Supplied with guide, strike plate and 12” (305 mm)
11⁄44-20 UNC threaded rod (see dimension “I”)• Mounting hardware included: combination machine-wood
screws
• Optional rods available (not pictured): #FBUL100R16 18" (457.2 mm) optional threaded rod #FBUL100R22 24" (609.6 mm) optional threaded rod
I
K
J
DC
L
A F
EB
P
O
M
N
H
G
MODEL FINISH A B C D E F G H I J K L M N O P
FBUL10015, 26D
19633⁄44
(171)1
(25.4)
33⁄44(19.1)
1(25.4)
11⁄88(3.2)
611⁄44(158.8)
11⁄22(12.7)
111⁄22(38.1)
12(305)
433⁄44(120)
1(25.4)
11⁄22(12.7)
211⁄44(57)
1515⁄1616
(23.8)2
(50.8)1
(25.4)
IN (MM)
06.301 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2021-02.
FLUSH BOLTSGENERAL HARDWARE
MODEL FINISH A B C D E F G H I J K L M N O P / UNIT
DC840 C3, C15633⁄44
(171)1
(25.4)
33⁄44(19.1)
1(25.4)
99⁄6464
(3.6)611⁄44
(158.8)
77⁄1616
(11.1)111⁄22
(38.1)12
(305)433⁄44
(111)1
(25.4)
11⁄22(12.7)
2(50.8)
1515⁄1616
(23.8)211⁄44(57)
155⁄1616
(23.8)2
8402C3, C5,
C10B, C26D633⁄44
(171)1
(25.4)
33⁄44(19.1)
1(25.4)
99⁄6464
(3.6)611⁄44
(158.8)
11⁄22(12.7)
111⁄22(38.1)
12(305)
499⁄1616
(116)1
(25.4)
11⁄22(12.7)
2(50.8)
1515⁄1616
(23.8)211⁄44(57)
155⁄1616
(23.8)2
IN (MM)
I
A
L
C
D
B E
P
O
M
G
J
K
HN
F
• Supplied with guide, strike plate and 12" (305 mm) 55⁄1616-18 UNC threaded rod
• Fits metal door preparation per ANSI A115.4-1981• Zinc-diecast and steel components • Mounting hardware included: machine and wood screws
#DC840 has a 55⁄88" (15.9 mm) throw and +55⁄88" (15.9 mm) adjustment
#8402 has a 11⁄22" (12.7 mm) throw and ±11⁄44" (6.4 mm) adjustment
MANUAL EXTENSION FLUSH BOLT DC840, 8402
MANUAL EXTENSION FLUSH BOLT DC860, DC861
F
CD
B E
I
J
L
K
H
MG
A
DC860GDC860RG
ERDC860 RRDC860
• Single bolt for aluminum doors• 11⁄88" (3 mm) or 11⁄44" (6 mm) offset • Throw: 55⁄88" (16 mm)• Flush bolt faceplate with 55⁄3232" (4 mm) radius corners• Zinc die-cast and steel components • Mounting hardware included: machine screws• Supplied with threaded adaptor bushing and locking nuts• Supplied with:
#RRDC860 12" (305 mm) Replacement rod #ERDC860 12" (305 mm) 11⁄44-20 UNC extension rod #DC860G / #DC860RG Nylon guides
MODEL FINISH A B C D E F G H I J K L M /BOX
DC860 C20D, C28511⁄44
(133)155⁄1616
(23.8)133⁄1616
(20.6)111⁄88
(28.6)
11⁄88(3.2)
411⁄44(108)
11⁄22(12.7)
111⁄22(38)
12(305)
111⁄22(38)
11⁄22(12.7)
33⁄44(19.1)
133⁄88(34.9)
10
DC861 C20D, C28511⁄44
(133)155⁄1616
(23.8)133⁄1616
(20.6)111⁄88
(28.6)
11⁄44(6.2)
411⁄44(108)
11⁄22(12.7)
111⁄22(38)
12(305)
111⁄22(38)
11⁄22(12.7)
33⁄44(19.1)
133⁄88(34.9)
10
IN (MM)
FLUSH BOLTSGENERAL HARDWARE
06.302ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
06.303 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAR OPA © CANAROPA - REV. 2020-03.
FLUSH BOLTSGENERAL HARDWARE
AUTOMATIC EXTENSION FLUSH BOLT FB610M
A
C
D
B
E
I
GH
JF
K
M
L
• cULus labeled and rated only for hollow metal doors up to and including 3 hrs. Conforms to UL 10C and UBC 7-2-1997
• Top and bottom flush bolts for use on metal doors measuring up to 4 ft. (1219 mm) wide and 8 ft. (2438 mm) high
• Fits standard and ANSI preparation for metal doors• Steel components • Fully automatic, when active door is opened, inactive door is
free• Maintains inactive door locked in case of fire• Supplied with bolt guide and door strike• Mounting hardware included: machine and combination
Machine-wood screws
MODEL FINISH A B C D E F G H I J K L M
FB610M 32D633⁄44
(171)1
(25.4)
33⁄44(19.1)
177⁄88(47.6)
11⁄88(3.2)
11⁄22(12.7)
55⁄88(15.9)
2(50.8)
12(305)
2(50.8)
1(25.4)
1 (25.4)
211⁄44 (57)
IN (MM)
FLUSH BOLTSGENERAL HARDWARE
06.304ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-12.
6" BRASS FLUSH BOLT 8123, 8124
C
I
H
G
B
D
8123 • Made of solid brass and steel materials• Flush bolt face plate end with 33⁄88" (9.5 mm) radius• Keeper included• Mounting hardware included: wood screws
8124 • Made of solid brass and steel materials• Keeper included• Mounting hardware included: wood screws
A
D
B
GE
F
I
H
C
MODEL FINISH A B C (BS) D E ø F G H I /BOX
8123 C11P, C15, C15A, C19, C26D
6(152)
33⁄44(19.1)
11⁄22(12.7)
111⁄44(31.6)
55⁄6464
(2)
11⁄22(12.7)
1(25.4)
2(50.8)
77⁄88(22.2) 25
IN (MM)
MODEL FINISH A B C (BS) D E ø F G H I /BOX
8124 C26, C36
(152)
33⁄44(19.1)
11⁄22(12.7)
111⁄44(32)
55⁄6464
(2)
11⁄22(12.7)
1(25.4)
2(50.8)
77⁄88(22.2) 25
IN (MM)
FLUSH BOLTSGENERAL HARDWARE
06.305 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-10.
4" BRASS FLUSH BOLT 8125
• Made of solid brass and steel materials• Keeper included• Mounting hardware included: wood screws
A
D
BF
EG
C
I
H
MODEL FINISH A B C (BS) D E ø F G H I /BOX
8125 C264
(102)
33⁄44(19.1)
1515⁄3232
(11.9)1 33⁄1616
(30.2)
55⁄6464
(2)
55⁄1616
(7.9)
1313⁄1616
(20.6)111⁄22
(38.1)
55⁄88(15.9) 20
IN (MM)
DUST PROOF STRIKE T840
BA
C
D E
• Aluminum• Spring loaded plunger• Strike engagement depth up to 33⁄44" (19 mm)
MODEL FINISH MATERIAL A ø B ø C D ø E /BOX
T840 C28 Aluminum177⁄88(48)
133⁄88(35)
2727⁄3232
(21.4)
11⁄88(3.2)
99⁄1616
(14.3) 25
IN (MM)
C
A F
DB
E
• Stainless steel• Spring loaded plunger• Strike engagement depth up to 33⁄44" (19 mm)• Accepts 55⁄88" (16 mm) diameter bolts• Includes wood screws, plastic anchors• Includes adjustment tool• Available with locking (#DPSL) or non-locking (#DPS) plunger
MODEL FINISH MATERIAL A B ø C D ø E F /BOX /CASE
DPS/ DPSL 15, 26D Stainless steel2
(51)277⁄88(73)
3131⁄3232
(25)
11⁄88(3.2
33⁄44(19)
133⁄88(35) 10 100
IN (MM)
DPSL
DUST PROOF STRIKE DPS, DPSL
SURFACE BOLTSGENERAL HARDWARE
06.320ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2021-05.
BRASS SURFACE BOLT F779
8" COMMERCIAL SURFACE BOLT 0831
• Two keepers included• Mounting hardware included: wood screws
B
C
AB
CD
E
F
• UL listed• Both top and bottom strikes included• Mounting hardware included: wood screws, drywall anchors
and machine screws
MODEL FINISH SIZE MATERIAL A B C /BOX
F779 C3, C11P, C15, C15A, C19, C26D 4 Brass 4
(102)
1111⁄1616
(17.5)
77⁄88(22.2)
30
IN (MM)
MODEL FINISH MATERIAL A B C D E F
0831 Satin nickel Steel7
(178)8
(203)1
(25.4)111⁄22
(38.1)
11⁄22(12.7)
1(25.4)
IN (MM)
CHAIN BOLT 66
A
B
E
D
C• Heavy-duty chain bolt• Spring loaded• Bolt reversible for in-swing and out-swing doors
#66S Surface strike for out-swing doors included; also available separately
66S
MODEL FINISH MATERIAL A B C SQ D E
66 Black Steel733⁄88
(187)2
(50.8)
55⁄88(15.9)
155⁄1616
(33.3)22
(559)
IN (MM)
SURFACE BOLTSGENERAL HARDWARE
06.321 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2021-05.
FOOT BOLT 68
12" CANE BOLT – HEAVY DUTY 1069
• Cast iron bolt
E
CB
D
A
F
• Mounting hardware included: wood screws
A
B
CD
MODEL FINISH MATERIAL A B C SQ D E SQ F
68 Black Steel733⁄88
(187)2
(50.8)
55⁄88(15.9)
1 (25.4)
2(50.8)
277⁄88 (73)
IN (MM)
MODEL FINISH MATERIAL A B C D
1069 Zinc plated Steel12
(305)2
(50.8)155⁄16 16
(33.3)
1515⁄32 32
(11.9)IN (MM)
TOWER & BARREL BOLTSGENERAL HARDWARE
06.330ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
TOWER BOLT 9234
STEEL BARREL BOLT 0711
MODEL FINISH MATERIAL A B C ø D E / BOX
9234 Epoxy black Steel411⁄88
(105)111⁄22
(38.1)1
(25.4)255⁄6464 (10)
111⁄44(31.8)
10
9236 Epoxy black Steel611⁄88
(156)111⁄22
(38.1)1
(25.4)255⁄6464 (10)
111⁄44(31.8)
10
9238 Epoxy black Steel811⁄88
(206)133⁄44
(44.5)133⁄88
(34.9)
11⁄22(12.7)
155⁄88 (41.3)
10
92310 Epoxy black Steel1011⁄88(257)
133⁄44(44.5)
133⁄88(34.9)
11⁄22(12.7)
155⁄88 (41.3)
10
IN (MM)
B
A
C
E
D
MODEL FINISH MATERIAL A B C ø D E / BOX
0711ZP2 Zinc plated Steel133⁄88
(34.9)177⁄1616
(36.5)
55⁄88 (15.9)
55⁄1616 (7.9)
99⁄1616 (14.3)
20
0711ZP25 Zinc plated Steel133⁄44
(44.5)177⁄1616
(36.5)
55⁄88 (15.9)
55⁄1616 (7.9)
55⁄88 (15.9)
12
0711ZP3 Zinc plated Steel211⁄88 (54)
177⁄1616 (36.5)
55⁄88 (15.9)
55⁄1616 (7.9)
33⁄44 (19.1)
12
0711ZP4 Zinc plated Steel3
(76)111⁄22
(38.1)
55⁄88 (15.9)
55⁄1616 (7.9)
1 (25.4)
12
0711ZP5 Zinc plated Steel333⁄44 (95)
111⁄22 (38.1)
55⁄88 (15.9)
55⁄1616 (7.9)
1 (25.4)
12
0711ZP6 Zinc plated Steel455⁄88
(117)111⁄22
(38.1)
55⁄88 (15.9)
55⁄1616 (7.9)
1 (25.4)
12
IN (MM)
• Mounting hardware included: wood screws
B
AE
D
C
• Steel bolt with groove• Groove holds bolt in position when installed vertically.
Prevents bolt from being shaken loose.
PADBOLTSGENERAL HARDWARE
06.340ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
STANDARD PADBOLTS 1068, 7210
EXTRA HEAVY DUTY PADBOLT 168
B
A
D
E
C
B
A
D
E
C
MODEL FINISH MATERIAL A B C ø D EMAX PADLOCK SHACKLE DIA
/BOX
1068ZP6 Zinc plated Steel411⁄22
(114)21111⁄1616 (68)
111⁄22 (38.1)
1919⁄3232 (15.1)
11313⁄1616
(46)
33⁄88 (9.5)
5
1068ZP8 Zinc plated Steel6
(152)255⁄88 (67)
111⁄22 (38.1)
111⁄22 (38.1)
111⁄22 (38.1)
33⁄88 (9.5)
5
7210ZP6 Zinc plated Steel455⁄88
(117)155⁄88
(41.3)111⁄44
(31.8)
77⁄1616 (11.1)
111⁄44 (31.8)
11⁄44 (6.4)
10
IN (MM)
1068• Also available retail packaged (#1068AP6C / #1068ZP8C)• Mounting hardware included: wood screws (retail package
includes carriage bolts and wood screws)
7210• Mounting hardware included: wood screws
7210
1068
B
A
D
E
C
MODEL FINISH MATERIAL A B C ø D EMAX PADLOCK SHACKLE DIA
/BOX
168K Zinc plated Steel5
(127)3
(76)133⁄1616
(30.2)
1313⁄1616
(20.6)233⁄1616 (56)
11⁄22(12.7)
5
IN (MM)
PADBOLTSGENERAL HARDWARE
BRENTON PADBOLT 1006
06.341 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-03.
MODEL FINISH MATERIAL A B C ø D EMAX PADLOCK SHACKLE DIA
1006 Zinc plated Steel633⁄44
(171)211⁄44 (57)
111⁄22 (38.1)
55⁄88 (15.9)
2 (50.8)
55⁄88 (15.9)
IN (MM)
B
A
D
E
C
C B
AE
D
MODEL FINISH MATERIAL A B C D EMAX PADLOCK SHACKLE DIA
1419 KJ, GV Steel10
(254)211⁄22
(63.5)533⁄44
(146)211⁄22
(63.5)2
(50.8)
55⁄88 (15.9)
IN (MM)
HEAVY DUTY UTILITY PADBOLT 1419
• Mounting hardware included: wood screws
B
C
A
MODEL FINISH MATERIAL A B CMAX PADLOCK SHACKLE DIA
/BOX
278ZP Zinc plated Steel5
(127)177⁄88
(47.6)177⁄1616
(36.5)
11⁄44 (6.4)
10
IN (MM)
A
B
C
D E• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C D E /BOX
H601 C15Zinc
die-cast211⁄44 (57)
11515⁄1616 (49.2)
55⁄88 (15.9)
1111⁄1616 (17.5)
33⁄88 (9.5)
10
IN (MM)
GATE LATCHESGENERAL HARDWARE
06.342ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
GATE LATCH 278
SECRET GATE LATCH H601
SAFETY HASPSGENERAL HARDWARE
06.350
STANDARD SAFETY HASPS 617
ECONOMICAL SAFETY HASPS H2131
A
B
C
D
E
MODEL FINISH MATERIAL A B C D EMAX PADLOCK SHACKLE DIA
/BOX
617ZP3 Zinc plated Steel3
(76)111⁄22
(38.1)111⁄22
(38.1)133⁄44
(44.5)111⁄44
(31.8)
33⁄88(9.5)
12
617ZP35 Zinc plated Steel311⁄22(89)
111⁄22(38.1)
111⁄22(38.1)
133⁄44(44.5)
111⁄44(31.8)
33⁄88(9.5)
12
617ZP45 Zinc plated Steel411⁄22
(114)111⁄22
(38.1)111⁄22
(38.1)133⁄44
(44.5)111⁄44
(31.8)
33⁄88(9.5)
12
617ZP6 Zinc plated Steel6
(152)177⁄88
(47.6)2
(50.8)211⁄44(57)
233⁄44(70)
11⁄22(12.7)
12
IN (MM)
A
B
C
D
E
MODEL FINISH MATERIAL A B C D EMAX PADLOCK SHACKLE DIA
/BOX
H2131ZP25 Zinc plated Steel211⁄22(64)
1(25.4)
1 (25.4)
111⁄88(29)
155⁄1616
(23.4)
55⁄1616
(7.9)12
H2131ZP4 Zinc plated Steel4
(102)111⁄44
(31.75)111⁄44(32)
155⁄1616
(33)111⁄88(28)
55⁄1616
(7.9)12
H2131ZP6 Zinc plated Steel577⁄88
(149)133⁄88
(34.9)133⁄88
(34.9)155⁄88
(41.3)133⁄1616
(30.2)
33⁄88(9.5)
12
IN (MM)
ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
• Staple pivots to vertical or horizontal position• Mounting hardware included: wood screws
A
B
C
D
E
MODEL FINISH MATERIAL A B C D EMAX PADLOCK SHACKLE DIA
/BOX
1557ZP35 Zinc plated Steel311⁄22(89)
111⁄22(38.1)
111⁄44(31.8)
177⁄1616
(36.5)111⁄44
(31.8)
33⁄88(9.5)
10
IN (MM)
PIVOTING SAFETY HASP 1557
A
B
C
D
E
A
B
C
D
E
A
B
C
D
E
CLOSET HARDWAREGENERAL HARDWARE
06.510ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV.2020-09.
ADJUSTABLE CLOSET ROD CR
ADJUSTABLE CLOSET ROD – FIXED END BRACKETS CRF
• Adjustable closet rod with wall mounts• 1" (25.4 mm) diameter rod• Mounting hardware included: wood screwsB
A
• Adjustable closet rod with fixed end-brackets• 1" (25.4 mm) diameter rod
MODEL FINISH SIZE MATERIAL A B C / BOX / CASE
CRF ZP 1830 Steel18 – 30
(460 – 760)
1(25.4)
255⁄88(67)
6 30CRF ZP, W 3048 Steel30 – 48
(760 – 1220)
CRF ZP, W 4872 Steel48 – 72
(1220 – 1830)
CRF ZP, W 7296 Steel72 – 96
(1830 – 2440)
1(25.4)
255⁄88(67)
6 18CRF ZP, W 96120 Steel96 – 120
(2440 – 3050)
CRF ZP, W 96150 Steel96 – 150
(2440 – 3810)
IN (MM)
B
A
C
MODEL FINISH MATERIAL A B / BOX / CASE
CRZP1830 Zinc plated Steel18 – 30
(460 – 760)
1(25.4)
5 25CRZP3048 Zinc plated Steel30 – 48
(760 – 1220)
CRZP4872 Zinc plated Steel48 – 72
(1220 – 1830)
CRZP7296 Zinc plated Steel72 – 96
(1830 – 2440) 1(25.4)
5 20
CRZP96120 Zinc plated Steel96 – 120
(2440 – 3050)
IN (MM)
CLOSET HARDWAREGENERAL HARDWARE
06.511 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2021-05.
CLOSET SHELF SUPPORTS – WITH CLOSET ROD HOOK CRSBW-H2
• Can accommodate closet rods up to 1" (25.4 mm) diameter
• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C D / BOX
CRSBW-H2 White Steel 1011⁄22(267)
1011⁄44(260)
1(25.4)
211⁄22 (63.5)
20
IN (MM)
B
A
C
D
CRSBW-H2
CLOSET SHELF SUPPORTS CRSBW-2
• Mounting hardware included: wood screws
B
A
CCRSBW-2
MODEL FINISH MATERIAL A B C D / BOX
CRSBW-2 White Steel 1011⁄22(267)
1011⁄44(260)
1(25.4)
— 20
IN (MM)
WARDROBE HOOKSGENERAL HARDWARE
06.520ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
WARDROBE HOOKS – CONTEMPORARY
• Stainless steel coat hook• Mounting hardware included: wood screws, plastic anchors
MODEL FINISH MATERIAL A B C
5806 32DStainless
steel
1313⁄1616
(20)299⁄1616
(65)111⁄44(31)
IN (MM)
• Stainless steel coat hook• Mounting hardware included: wood screws, plastic anchors
MODEL FINISH MATERIAL A B C
5805 32DStainless
steel
1313⁄1616
(20)2
(51)199⁄1616
(40)
IN (MM)
• Stainless steel coat hook• Concealed mounting• Mounting hardware included: wood screws, plastic anchors
MODEL FINISH MATERIAL ø A B ø C
5807 32DStainless
steel133⁄88(35)
11111⁄1616
(42)
99⁄1616
(14)
IN (MM)
• Stainless steel coat hook• Concealed mounting• Mounting hardware included: wood screws, plastic anchors
MODEL FINISH MATERIAL A B C
5808 32DStainless
steel133⁄88(35)
11111⁄1616
(42)
99⁄1616
(14)
IN (MM)
A
C
B
AC
B
C
A
B
C
A
B
06.521 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-03.
WARDROBE HOOKSGENERAL HARDWARE
WARDROBE HOOKS – TRADITIONAL
A
B
C• Solid brass coat hook• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C /BOX
0595 BP Brass1111⁄1616
(17.5)11111⁄1616
(42.8)199⁄1616
(39.7)50
IN (MM)
A
B
C
• Solid brass coat hook• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C /BOX
0580 BP Brass133⁄1616
(30.2)1
(25.4)
33⁄44(19.1)
10
IN (MM)
A
B
C
• Solid brass coat hook• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C /BOX
5803 BP Brass1111⁄1616
(17.5)111⁄44
(31.8)155⁄88(42)
25
IN (MM)
AC
B
• Zinc die-cast coat hook• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C /BOX
3542BP,
CHRZinc
die-cast
1111⁄1616
(17.5)111⁄22
(38.1)111⁄22
(38.1)100
IN (MM)
D
C
B
A
• Zinc die-cast double coat hook• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C D /BOX
3541BP,
CHRZinc
die-cast21313⁄1616
(71.4)177⁄88
(47.6)111⁄1616
(27)
1515⁄1616
(23.8)50
IN (MM)
WARDROBE HOOKSGENERAL HARDWARE
WARDROBE HOOKS – HAT & COAT
B
C
AD
A
B
C
D
• Contemporary stainless steel hook• Concealed mounting• Mounting hardware included: wood screws, plastic
anchors and hex key
MODEL FINISH MATERIAL A B C D /BOX
5804 32DStainless
steel177⁄1616
(37)51515⁄1616
(151)399⁄1616
(90)211⁄22(64)
4
MODEL FINISH MATERIAL A B C D /BOX
3543BP, CHR,
C26DZinc
Diecast
1313⁄1616
(20.6)311⁄22(89)
2(50.8)
499⁄1616
(40)10
3545 BP, CHRZinc
Diecast1
(25.4)455⁄88
(118)311⁄22(89)
2(50.8)
10
IN (MM)
• Traditional coat & hat hook• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C D /BOX
6206 BP, CHRZinc
Diecast111⁄88
(28.6)211⁄44(57)
233⁄44(70)
133⁄88(34)
10
IN (MM)
• Traditional coat & hat hook• Mounting hardware included: wood screws
• Contemporary stainless steel hook• Mounting hardware included: wood screws, plastic anchors
MODEL FINISH MATERIAL A B C D /BOX
5802 32DStainless
steel
33⁄44(19)
511⁄22(140)
255⁄1616
(58)133⁄44(44)
10
IN (MM)
06.522ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
B
A
CD
D
B
C
A
HANDRAIL BRACKETSGENERAL HARDWARE
06.530 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
HANDRAIL BRACKETS
MODEL FINISH MATERIAL A B / BOX
3590LC3, C11P, C15,
C15A, C19Zinc die-cast
311⁄4 4
(83)211⁄44 (57)
50
3590 C15 Zinc die-cast255⁄1616 (59)
211⁄44 (57)
25
IN (MM)
MODEL FINISH MATERIAL A B / BOX
695 C3, C15, NPZinc
die-cast255⁄88(67)
21515⁄1616 (75)
50
IN (MM)
MODE FINISH MATERIAL A B / BOX
8424C3, C5, C11P, C15A, C26D
Zinc die-cast233⁄44(70)
311⁄8 8
(79)10
IN (MM)
• #3590L Backset with large projection is the best choice for new building code compliance
• Mounting hardware included: wood screws, mounting bracket
• Heavy-duty• Mounting hardware included: wood screws, mounting
bracket
B
A
B
A
• Mounting hardware included: wood screws
A
B
MOUNTING BRACKET
MOUNTING BRACKET
DOOR CATCHES & LATCHESGENERAL HARDWARE
06.540ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
ROLLER CATCH
• For wood door and frame • Nylon roller• Adjustable for door gap• Mounting hardware included: wood screws• Includes T-Strike
A
B
C
D
E
G
F H
MODEL FINISH MATERIAL A ø B C D E F G H /BOX
01012 C26D Zinc die-cast111⁄22
(38.8)
33⁄44(19.1)
2929⁄3232 (23)
211⁄44(58)
1313⁄16 16
(21)211⁄44 (58)
199⁄1616 (36)
111⁄1616 (27.3)
25
IN (MM)
HEAVY DUTY ROLLER CATCH
• Adjustment for door gap• Adjustable spring tension on roller • Mounting hardware included: wood screws
#01015 No strike included#01015D Includes full lip D-strike#01015T Includes T-strike#01015ASA Includes ASA-strike
MODEL FINISH MATERIAL A B C D E F G H /BOX
01015 C26DZinc
die-cast333⁄88 (86)
1 (25.4)
199⁄1616
(39.6)— — — — — 10
01015D C3, C26DZinc
die-cast333⁄88 (86)
1 (25.4)
199⁄1616
(39.6)299⁄3232 (58)
—133⁄44
(44.5)
33⁄1616 (4.8)
— 10
01015T C26DZinc
die-cast333⁄88 (86)
1 (25.4)
199⁄1616
(39.6)233⁄44 (70)
155⁄3232 (29.4)
177⁄88 (47.6)
11⁄1616 (1.5)
111⁄22 (38.8)
10
01015ASA C26DZinc
die-cast333⁄88 (86)
1 (25.4)
199⁄1616
(39.6)477⁄88
(124)111⁄4 4
(38.1)11515⁄1616
(49.2)
33⁄3232 (2.4)
333⁄8 8
(86)—
IN (MM)
T-STRIKE
ASA-STRIKE
CB
A
GF
E
D
G
G
F
F
D
E
D H
H
CB
A
GF
E
D
G
G
F
F
D
E
D H
H
CB
A
GF
E
D
G
G
F
F
D
E
D H
H
CB
A
GF
E
D
G
G
F
F
D
E
D H
H
D-STRIKE
06.541ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE.
VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-03.
DOOR CATCHES & LATCHESGENERAL HARDWARE
BALL CATCH
• For wood door and frame• Adjustable for door gap• Strike included for 133⁄88" (35 mm) thick door• Mounting hardware included: wood screws
A C
D
E
FB
G
MODEL FINISH MATERIAL A ø B C D E F G /BOX
01013C3, C5, C15A,
C26, C26DSteel
133⁄1616 (30.1)
2727⁄32 32
(21.5)1
(25.4)211⁄44 (57)
177⁄1616 (36.5)
211⁄88 (54)
133⁄1616 (30)
50
IN (MM)
• For wood door and frame • Zinc die-cast body, with steel ball and strike• Fits into 1" (25.4 mm) bore• Adjustable for frame gap• Strike for 133⁄88" (35 mm) doors; 77⁄3232" (5 mm) rounded corners• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A ø B ø C E F G /BOX
01003C10B, C11P, C15C19, C26, C26D
Zinc die-cast133⁄1616
(30.1)
3131⁄3232 (24.6)
1 (25.4)
133⁄88 (34.9)
211⁄44 (57)
133⁄1616 (30)
50
IN (MM)
BALL CATCH – DRIVE IN
B
A
C
E
F
G
• For wood door and frame • Adjustable spring tension• Adjustable for frame gap• Strike for 133⁄88" (35 mm) doors; 77⁄3232" (5 mm) rounded corners• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A ø B C D E F G /BOX
01014C3, C10B, C15,
C15A, C19, C26DBrass
111⁄22 (38,8)
1111⁄1616 (17,8)
1(25.4)
211⁄88 (54)
133⁄88(35,4)
211⁄88 (54)
133⁄1616 (30)
20
IN (MM)
BALL CATCH – BRASS
C E
B
A
FD
G
LAVATORY PARTITIONGENERAL HARDWARE
06.600ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
Lavatory Clamp Flange Spring Hinge.
Single action with adjustable spring tension. For doors and jambs 77⁄88–111⁄44" (22–32 mm) thick.
1001 311⁄2 2 x 4" (89 x 102 mm)
01001 311⁄2 2 x 2" (89 x 51 mm)
5019 Rim bolt & keeper.
5017 Occupancy indicator & emergency key. Pairs with #5019 rim bolt.
LAVATORY HARDWARE
• BOMMER offers a wide variety of lavatory hardware items including partition supports, door hinges, spring hinges, door stops and locks
• All made in solid brass and available in a variety of finishes
Please contact to order or visit www.bommer.com for details.
5004 Rim Bolt & Keeper.
06.700ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
MAGNETIC CATCHESGENERAL HARDWARE
MAGNETIC CATCH M700
• Zinc plated steel strike• Plastic housing with magnet• Magnet holding capacity is 6 lbs (2.7 kg)
• Zinc plated steel strike• Plastic housing with magnet• Magnet holding capacity is 2 lbs (0.9 kg)
• Zinc plated steel strike• Plastic housing with magnet• Magnet holding capacity is 18 lbs (8 kg)
AC
B
D
E
A
B
C
E
D
MODEL FINISH A B C D E /BOX
M1800-1 White277⁄88 (73)
99⁄1616 (14.3)
1111⁄16 16
(17.5)233⁄88(60)
11⁄22(12.7)
20
IN (MM)
MODEL FINISH A B C D E /BOX
M700 B, W, WA133⁄44
(44.5)
11⁄22 (12.7)
99⁄16 16
(14.3)133⁄1616
(30.5)
2929⁄3232 (23)
100
IN (MM)
AC
B
D
E
MODEL FINISH A B C D E /BOX
M2800W White11313⁄1616 (46)
77⁄8 8
(22.2)1
(25.4)133⁄1616
(30.5)
2929⁄3232 (23) 20
IN (MM)
MAGNETIC CATCH – HIGH STRENGTH M1800-1
MAGNETIC CATCH – TALL M2800
06.710 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
BALL & ROLLER CATCHESGENERAL HARDWARE
BALL & ROLLER CATCHES
JUMBO ROLLER CATCH• Spring loaded plastic roller• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C /BOX
2804 Zinc plated Steel11515⁄1616
(49.4)1
(25.4)
1515⁄1616
(23.8)50
IN (MM)
B
A
C
A
B
C
A
B
D
C
AC
B
A
B
D
C
SINGLE ROLLER CATCH• Spring loaded plastic roller• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C /BOX
950 Zinc plated Steel133⁄88
(34.9)
33⁄44(19.1)
1111⁄1616
(17.5)100
IN (MM)
BRASS BALL CATCH• Spring loaded steel balls• Adjustable spring tension
MODEL FINISH MATERIAL A B C /BOX
112Polished
brassBrass
11515⁄1616 (49.4)
11⁄2 2
(12.7)
33⁄8 8
(9.5)40
IN (MM)
DOUBLE ROLLER CATCH• Spring loaded plastic rollers• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C D /BOX
3631ZP Zinc plated Steel111⁄44
(31.8)
99⁄16 16
(14.3)111⁄88
(28.6)
55⁄8 8
(15.9)100
IN (MM)
DOUBLE ROLLER CATCH WITH CLIP• Plastic rollers• Spring c-clip• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C D /BOX
3632ZP Zinc plated Steel11111⁄1616
(42.9)
33⁄4 4
(19.1)
1515⁄16 16
(23.8)
11⁄2 2
(12.7)100
IN (MM)
06.740ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
REINFORCEMENT HARDWAREGENERAL HARDWARE
REINFORCEMENT BRACES 366 SERIES
MODEL FINISH MATERIAL A B C /BOX
36615-1 Zinc Plated Steel 1(25.4)
11⁄22(12.7)
77⁄3232
(5.6)20
36615-15 Zinc Plated Steel111⁄22
(38.1)
11⁄22(12.7)
77⁄3232
(5.6)20
36615-2 Zinc Plated Steel2
(50.8)
55⁄88(15.9)
77⁄3232
(5.6)20
36615-25 Zinc Plated Steel211⁄22(64)
55⁄88(15.9)
77⁄3232
(5.6)20
36615-3 Zinc Plated Steel3
(76)
33⁄44(19.1)
11⁄44(6.4)
20
36615-4 Zinc Plated Steel4
(102)77⁄88
(22.2)
11⁄44(6.4)
10
IN (MM)
MODEL FINISH MATERIAL A B C /BOX
36611-15 Zinc Plated Steel 111⁄22(38.1)
33⁄88(9.5)
33⁄1616
(4.8)20
36611-2 Zinc Plated Steel 2(50.8)
33⁄88(9.5)
33⁄1616
(4.8)20
IN (MM)
A
A
B“C”DIA
B
A
A
“C”DIA
A
B
“C”DIA
A
B
MODEL FINISH MATERIAL A B C /BOX
36618-2 Zinc Plated Steel2
(50.8)
55⁄88(15.9)
77⁄3232
(5.6)20
36618-25 Zinc Plated Steel211⁄22
(38.1)
55⁄88(15.9)
77⁄3232
(5.6)20
36618-3 Zinc Plated Steel3
(76)
33⁄44(19.1)
77⁄3232
(5.6)20
36618-4 Zinc Plated Steel4
(102)
77⁄88(22.2)
77⁄3232
(5.6)20
IN (MM)
36618-3 / -4
36618-2 / -25
ø
ø
ø
06.810ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
SLIDING HARDWAREGENERAL HARDWARE
SLIDING DOOR HARDWARE 10-4060
MODEL CAPACITY TRACK* FASCIA*
10-4060
(2) Ball bearing hangers(2) In-track stop/holders(1) Floor guide(1) Adjustment tool(10) Mounting screws(2) Plastic floor anchors
132 lbs (60 kg)
TR01, TR02B
TRF01**, TRF01B
(*) ALUMINUM TRACKS AND FASCIA SOLD SEPARATELY, VARIOUS LENGTHS AVAILABLE (**) MAX. THICKNESS IS ONLY 133⁄88IN (35MM), FOR 133⁄44IN (44.5MM) USE TRFO1B
• For pocket-door, wall-mounted, by-pass or multi-track applications• For door panel 1 – 133⁄44" (25.4 – 44.5 mm) thick when using fascia*• Load capacity: 132 lbs (60 kg) per door panel• Zinc die-cast hangers with ball bearing nylon wheels• 2 hangers per door panel (one kit per door panel)• Optional floor guides available, see 06.850
(*) Without fascia, maximum thickness is limited by installation and door weight.
For application options, please request an Application Guide.
11515⁄1616 – 211⁄88(50–54)
111⁄44(32)
311⁄88 (80)
177⁄88 (48)
TR02B
11⁄22(12.7)
211⁄44(57)
TRF01
IncludedFloor
Guide33⁄1616 – 1515⁄3232
(5–12)
11515⁄1616 – 211⁄88(50–54)
111⁄44(32)
11⁄22(12.7)
211⁄44(57)
TR01
TRF01B
IncludedFloor
Guide
33⁄1616 – 1515⁄3232
(5–12)
199⁄3232
(32.6)
06.820ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
SLIDING HARDWAREGENERAL HARDWARE
BY-PASS DOOR HARDWARE 20-4030
MODEL CAPACITY TRACK* FASCIA*
20-4030
(4) Ball bearing hangers(4) In-track stoppers(2) Floor guides(20) Mounting screws(4) Plastic anchors
66 lbs (30 kg)
TR02B TRF01B
(*) ALUMINUM TRACKS AND FASCIA SOLD SEPARATELY, VARIOUS LENGTHS AVAILABLE
• For by-pass or multi-track applications including wardrobes, closets, room dividers and office partitions
• For door panels up to 133⁄44" (44.5 mm) thick• Load capacity: 66 lbs (30 kg) per door panel• Aluminum side-mount hangers with ball bearing nylon wheels• 2 hangers per door panel (one kit per two door panels)• Optional floor guides available, see 06.850
For application options, please request an Application Guide.
11515⁄1616 – 211⁄88(50–54)
111⁄44(32)
311⁄88 (80)
177⁄88 (48)
TR02B
11⁄22(13.5)
211⁄44(57)
TRF01B
IncludedFloor
Guide33⁄1616 – 1515⁄3232
(5–12)
06.821 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-08.
SLIDING HARDWAREGENERAL HARDWARE
BY-PASS DOOR HARDWARE 21-1025
MODEL CAPACITY TRACK* FASCIA
21-1025
(4) Ball bearing hangers(1) Stop(1) 3-piece floor guide(24) Mounting screws
162 lbs (60 kg)
TR11 —
(*) ALUMINUM TRACK SOLD SEPARATELY, VARIOUS LENGTHS AVAILABLE
• For by-pass applications including wardrobes and closets• For door panels up to 133⁄44" (44.5 mm) thick• Load capacity: 55 lbs (25 kg) per door panel• Steel side-mount hangers with ball bearing nylon wheels• 2 hangers per door panel (one kit per two door panels)• Optional floor guides available, see 06.850
For application options, please request an Application Guide.
133⁄44 – 211⁄1616
(44–52)
133⁄88(34.9)
2 55⁄3232
(54.7)
99⁄3232 –77⁄1616
(7–11)
133⁄44 (44.5)
TR11
IncludedFloor
Guide
06.830ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
SLIDING HARDWAREGENERAL HARDWARE
BI-FOLD DOOR HARDWARE 31-1015
MODEL CAPACITY TRACK* FASCIA*
31-1015
(1) Top pivot assembly(1) Floor pivot(1) In-track stop/holder(1) Ball bearing guide(3) Panel hinges(1) Adjustment tool(20) Panel screws(5) Pivot screws
33 lbs (15 kg)
TR21 —
(*) ALUMINUM TRACK SOLD SEPARATELY, VARIOUS LENGTHS AVAILABLE
• Bi-fold door hardware for light-duty applications including closets, pantries and concealing utility and storage areas
• For door panels up to 133⁄88" (35 mm) • Load capacity: 33 lbs (15 kg) per bi-folding door• Steel pivot assembly with ball bearing nylon wheel guide• Steel panel hinges• One kit per bi-folding door
For application options, please request an Application Guide.
1313⁄1616
(21)
1515⁄1616 (23)
55⁄88 –1(16–25)
TR21
IncludedFloor Pivot
1–111⁄88”(25–28 mm)
SLIDING HARDWAREGENERAL HARDWARE
06.840ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-08.
SLIDING TRACKS TR01, TR02B, TR11, TR21
TR01 SINGLE TRACK• Extruded aluminum track, milled finish• Top mounting holes every 12" (305 mm)• Snap-on fascia available, see page 06.841• End-caps and wall-mount bracket available
see page 06.850• Standard and custom lengths available • Mounting screws NOT included
STANDARD LENGTHS*
TR01-60 60" (1524 mm)TR01-72 72" (1828 mm)TR01-120 120" (3048 mm)TR01-144 144" (3658 mm)
TR02B DOUBLE TRACK• Extruded aluminum track, milled finish• Top mounting holes every 12" (305 mm)• Snap-on fascia available, see page 06.841• Standard and custom lengths available• Mounting screws NOT included
STANDARD LENGTHS*
TR02B-60 60" (1524 mm)TR02B-72 72" (1828 mm)TR02B-120 120" (3048 mm)TR02B-144 144" (3658 mm)
TR11 J-TRACK• Extruded aluminum track, milled finish• Top mounting holes every 12" (305 mm)• Standard and custom lengths available• Mounting screws NOT included
STANDARD LENGTHS*
TR11-60 60" (1524 mm)TR11-72 72" (1828 mm)TR11-120 120" (3048 mm)TR11-144 144" (3658 mm)
TR21 BI-FOLD TRACK• Extruded aluminum track, milled finish• Standard and custom lengths available• Mounting screws NOT included
STANDARD LENGTHS*
TR21-36 36" (914 mm)TR21-48 48" (1219 mm)TR21-60 60" (1524 mm)TR21-72 72" (1828 mm)TR21-120 120" (3048 mm)TR21-144 144" (3658 mm)
15/16(23)
13/16(21)
(*) STANDARD AND CUSTOM LENGTHS CAN VARY BY ± 1/4IN (6.4MM)
111⁄44(32)
199⁄3232
(32.6)
111⁄44(32)
311⁄88 (80)
177⁄88 (48)
133⁄88(34.9)
2 55⁄3232
(54.7)
133⁄44(44.5)
06.841 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2021-05.
SLIDING HARDWAREGENERAL HARDWARE
FASCIA TRF01B
TRF01B SNAP-ON FASCIA• Improved design for easier installation/
removal when track is ceiling mounted• Extruded aluminum fascia, clear anodized
finish• For use with #TR01 or #TR02B tracks• Standard and custom lengths available
STANDARD LENGTHS*
TRF01B-60 60" (1524 mm)TRF01B-72 72" (1828 mm)TRF01B-120 120" (3048 mm)TRF01B-144 144" (3658 mm)
(*) STANDARD AND CUSTOM LENGTHS CAN VARY BY ± 1/4IN (6.4MM)
2 11⁄44(57)
11⁄22(13.5)
SLIDING HARDWAREGENERAL HARDWARE
06.850ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-10.
FASCIA END CAPS TRFC01, TRFC01D
TRFG01
TRG01A
FLOOR GUIDES TRG01, TRG01A, 21-1025-FG
TRFC01S SINGLE END CAP• Paired aluminum plates, clear anodized finish• Fits single #TR01 track with #TFR01 or #TRF01B fascia
on either side• Mounting screws included
TRFC01D DOUBLE END CAP• Paired aluminum plates, clear anodized finish• Fits single #TR01 track with #TFR01 or #TRF01B fascia
on both sides• Mounting screws included
TRFG01 FLOOR GUIDE• Ball bearing floor guide• Includes wood screws
21-1025-FG FLOOR GUIDE• Nylon floor guide for by-pass applications• Included with #21-1025 kit• Includes stop• Includes 25 wood screws
TRG01A FLOOR GUIDE TRACK• Extruded aluminum track, milled finish• Available in 72" (1828 mm) lengths• Other cut lengths available by special order
2 33⁄88(60)
1 33⁄44(45)
2 33⁄88(60)
2 11⁄44(57)
33⁄1616
(5)
1 33⁄88(35)
99⁄1616 (15)
1111⁄1616
(17)
ø 11⁄22(13)
1111⁄1616
(17)
99⁄1616
(15)
33⁄44(19.5)
55⁄88(16)
1 77⁄88(47)
1 11⁄3232
(26.3)
55⁄88(16)
33⁄44(19.5)
06.851 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-08 .
SLIDING HARDWAREGENERAL HARDWARE
• Extruded aluminum bracket, clear anodized finish• For use with #TR01 track• (2) Plastic wall anchors and wood screws included• (2) Machine screws and nut included• Multiple mounts are required per track; one per
12" (305 mm) is recommended• Wall spacers for clearance may be required for some
installations (not provided; please verify your installation)
WALL MOUNT WM01
1 33⁄44(45)
1 11⁄44(32)
1 11⁄44(32)
55⁄3232
(4)
WINDOW CATCHES & LATCHESGENERAL HARDWARE
06.900ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
TRANSOM CATCH DC25
• Spring loaded latch• Includes keeper• Optional strikes sold separately
#SUSAP49 Flat strike #SUSAP49FS Sash strike #HR216 Replacement keeper
MODEL FINISH MATERIAL A B C D E F G H I J /BOX
DC25 SL Zinc die-cast11313⁄1616 (46)
133⁄44 (44.5)
133⁄44 (44.5)
1313⁄3232 (10.3)
11⁄22 (12.7)
77⁄8 8
(22.2)133⁄44
(44.5)
11⁄22 (12.7)
77⁄8 8
(22.2)
11⁄22 (12.7)
20
IN (MM)
TRANSOM CATCH 5215
SUSAP49
CF
H
I
AE
B D
G
J
SUSAP49FS
HR216
• Spring loaded latch• Includes keeper• Mounting hardware included: wood screws
C F
D
I
A
E
HB D
G
MODEL FINISH MATERIAL A B C D E F G H I /BOX
5215 SL Zinc die-cast2
(50.8)111⁄88
(28.6)155⁄88
(41.3)
55⁄1616 (7.9)
11⁄22 (12.7)
11⁄22 (12.7)
2 (50.8)
1919⁄3232 (15.1)
11⁄22 (12.7)
20
IN (MM)
SASH HOOK DC60
MODEL DESCRIPTION / BOX
DC60 Hook only, no pole 30
DC60P Hook with 6 ft. (1.83 m) vinyl covered pole 20
DC60P144 Hook with 12 ft. (3.66 m) vinyl covered pole 10
• Zinc die-cast hook• Chrome plated• Available with 33⁄44" (19 mm) diameter, 6 ft. or 12 ft. (1.83 m or 3.66 m) vinyl
covered wood pole
06.901 ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA © CANAROPA - REV. 2020-03.
WINDOW CATCHES & LATCHESGENERAL HARDWARE
CASEMENT WINDOW HANDLE DC620T
• Zinc die-cast lever• Handed (left hand shown)• 90° lever rotation• Wedge keeper sold separately (#DC610)
MODEL FINISH MATERIAL A B C D E /BOX
DC620T Satin chrome Zinc die-cast1
(25.4)133⁄44
(44.5)155⁄88
(41.3)311⁄88(79)
1111⁄6464
(4.4)20
IN (MM)
SASH LOCK 2832
WING BUTTON 5101, 5102
DC610
A
B
C
D
“E”DIA
DC620TL
A
D
C
B
• Steel sash lock• Spring loaded• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B C D /BOX
2832BP Brass plated Steel233⁄88(60)
133⁄88(34.9)
1313⁄1616
(20.6)
11⁄22(12.7)
20
IN (MM)
A
B
B
A • Steel wing button locks• Zinc plated• Mounting hardware included: wood screws
MODEL FINISH MATERIAL A B /BOX
5101 Zinc plated Steel133⁄44
(44.5)
33⁄44(19)
300
5102 Zinc plated Steel111⁄44
(31.8)
33⁄44(19)
300
IN (MM)
5101
5102
WINDOW HARDWAREGENERAL HARDWARE
06.910ALL IMAGES, ILLUSTRATIONS AND DIMENSIONS, IN (MM), ARE FOR REFERENCE ONLY. PRODUCT DETAILS MAY CHANGE WITHOUT NOTICE. VISIT WWW.CANAROPA.COM OR CONTACT FOR MORE DETAILS. DISTRIBUTED BY CANAROPA. © CANAROPA - REV. 2020-03.
CREMONE BOLT SET 41371
• Cremone bolt set for French windows and doors• High quality cast iron construction• Set includes: 1 handle, 2 strikes, 1 center guide and
2 end-guides• Rod sold separately; black finish (#62173EXB)
MODEL FINISH MATERIAL A B C D
41371EXB Black Cast-iron5133⁄1616
(1300)111⁄22
(38.1)5
(127)233⁄88 (60)
IN (MM)
C
B D
A
ROD#62173EXB
Architectural Builders Hardware Mfg. Inc. (ABH) has been manufacturing the highest quality products for the past 20 years. Through the implementation of Robotics, Automation and Lean Manufacturing, ABH has been able to efficiently manufacture products at the highest quality standards.
www.abhmfg.com
FEATURES AND BENEFITS
• Anti-microbial coating available
• Most products are cULus listed
• Most products are stainless steel
• Available in a variety of BHMA finishes
• Custom sizes & finishes available
see more at: www.abhmfg.com
PUSH / PULL LATCH
EDGE GUARD
STAINLESS STEEL HINGE with WELDED HOSPITAL TIP
ELECTRICAL POWER TRANSFER
A.030
OverviewOverhead Holders & Stops
Electromagnetic Door Holders
Geared Hinges
Montreal T. 514.636.6466 • F. 514.636.6454Toronto T. 416.241.4445 • F. 416.241.1989
Calgary T. 403.250.9333 • F. 403.250.1160Vancouver T. 604.279.2524 • F. 604.279.0577
To locate a reseller or for product inquiries, please contact your nearest representative.
R1
04/1
4
P1
04/1
4
PIVOTS POWER TRANSFERS RESCUE STRIKES
OTHER PRODUCTS:
• Stainless steel continuous hinges
• Door edge guards
• Slide bolts
• Custom strikes
Bommer Industries Builders Hardware Division continues the trademarks of quality and innovation that were founded in 1876. Bommer offers a complete line of Architectural Grade Butt Hinges, our industry leading line of Single Acting Spring Hinges, the world renowned Double Acting Spring Hinges, Specialty Door and Gate Pivots, and high quality Lavatory Hardware.
www.bommer.com
need hi-res beauty shotof actual bommer prod.
A.100
Montreal T. 514.636.6466 • F. 514.636.6454Toronto T. 416.241.4445 • F. 416.241.1989
Calgary T. 403.250.9333 • F. 403.250.1160Vancouver T. 604.279.2524 • F. 604.279.0577
To locate a reseller or for product inquiries, please contact your nearest representative.
R2
2015
/06
P
2 20
15/0
7
• Patented
• Available in many architectural fi nishes
• cULus listed
• BHMA certifi ed Grade 1 (1 million cycles)
• Surface or Mortised (full or half) types
• Wide throw, raised barrel, slip-in, swing clear & anchormodels available
• Available in three bearing types and pin styles
• Available in many architectural fi nishes
Gravity PivotSpring Gate Pivot
LavatoryHinge
LavatoryHinge
Spring & Gravity Pivots
Lavatory Hardware
HorizontalSpring Pivot
Single Double
see more at: www.bommer.com
Single & Double Acting Spring Hinges
BHMA Certified Architectural Hinges
3 knuckle,flush tip
5 knuckle,bottom tip
Rim bolt & keeper
Rim bolt & keeperOccupancy indicator & emergency key
• cULus listed
• BHMA certifi ed Grade 1 (1 million cycles)
• Patented
• Available in many architectural fi nishes
CX5 technology was developed as an innovative and affordable solution to the limitations of common key cylinders in the fields of physical security and loss prevention.
Through high-precision manufacturing, uncompromising quality standards and patented technologies, CX5 delivers
www.cx5security.com
Better security for everyone!
A.180
Montreal T. 514.636.6466 • F. 514.636.6454Toronto T. 416.241.4445 • F. 416.241.1989
Calgary T. 403.250.9333 • F. 403.250.1160Vancouver T. 604.279.2524 • F. 604.279.0577
To locate a reseller or for product inquiries, please contact your nearest representative.
R1
04/1
4
P1
04/1
4
Overview
High Security Features
* Exploded view of a UL437 CX5 9320 Mortise Cylinder with cut key and
Rim Conversion Kit
HARDENED PINS Offer drill resistance protection to critical components
CoMponenTs Set-screw caps, stainless steel top springs, mushroom pins and bottom pins, facilitate pinning the cylinder while offering enhanced security
SIDE bAR & PINS The side bar, a secondary locking mechanism, is released when the
springless side pins are aligned by the Security Groove on the key.
This feature makes the cylinder pick and bump resistant
CAM Various cams available to
operate locks from different hardware manufacturers
CX5 KEY WITH SECURITY GROOVE Allows for hundreds of possible independent keyways to be created from each key profile
LARGE FORMAT SCHLAGE®
KIK CYLINDERS
SMALL FORMAT BEST®LARGE FORMAT MEDECO®
DEADBOLTSRIM & MORTISE CYLINDERS
• MANAGED KEY CONTROL Key control is critical for high security. A stolen or copied key is among the most common ways security is breached. CX5 keys are all patented, geographically managed and can only be cut by an authorized dealer when presented with a valid CX5 control card.
• ENHANCED ATTACK RESISTANCE Common locks and cylinders can easily be picked or drilled, but CX5 cylinders, protected by hardened steel pin, are more resistant to drilling and other forms of physical attacks.
• MULTIPLE LOCKING POINTS CX5 cylinders have springless side pins that must be aligned to release the side bar, acting as a secondary locking mechanism, making them pick and bump resistant.
• FLEXIBLE CX5 cylinders are designed to accommodate a variety of leversets, knobsets, mortise locks, deadbolts, exit device trims and padlocks from various hardware manufacturers.
• EXPANDABLE CX5 keying systems can be designed to grow with your keying requirements. So that you can accommodate for planned and/or unexpected expansion.
• AFFORDABLE CX5 Security Solutions is committed to offering cost-effective high security solutions to everyone.
Proven and Innovative High Security Technology
Condominiums & SuitesApartment BuildingsSingle Family HomesShared living spaces
RESIDENTIAL
HospitalsMedical BuildingsGovernment OfficesSchools & UniversitiesGaming centers
Retail CentersProduct DisplaysCorporate OfficesIT / Data CentersWarehousing / Storage
COMMERCIAL
Factory / Plant AccessPublic UtilitiesHeavy EquipmentTransport Security
INDuSTRIAL
INSTITuTIONAL
CX5 security solutions can be adapted to fit most applications that require enhanced security and/or key control simply by installing CX5 cylinders in new lock installations or replacing the cylinders in currently installed locks.
see more at: www.cx5security.com
RIM ConVeRsIon KIT Enables the conversion of
a CX5 mortise cylinder to a rim cylinder
Perko concealed door closers have been closing doors in a wide variety of commercial, residential, and institutional buildings for over 30 years, establishing themselves as the preferred choice for specifi ers and contractors.
www.perkopower.com
5/32
(4)5/32(4)
6 11/16(170)
7/8(22)
1(25)
1(25)
5(127)
2 3/4(70)
3/16(5)3/16
(5)
7(178)
1 1/8(29)
1 3/16(30)
5 1/2(140)
3 7/8(98)
A.770
Perko
Perkomatic
Perkopower
Montreal T. 514.636.6466 • F. 514.636.6454Toronto T. 416.241.4445 • F. 416.241.1989
Calgary T. 403.250.9333 • F. 403.250.1160Vancouver T. 604.279.2524 • F. 604.279.0577
Dimensions unless specifi ed otherwise are: Inches (Millimeters)
• Fits 1 1⁄4 to 1 3⁄4" (31.8 to 44.5 mm) door thicknesses• For doors up to 176 lbs (80 kg) in weight and 37 1⁄2" (950 mm) wide• Conforms to ANSI 156.4 and ADA maximum opening force • Conforms to power size 3 on controlled door closing device• Suitable for latched and unlatched installations• Adjustable closing speed and latching action• Endurance tested to 500,000 closing cycles• Unique twin power mechanism for extra closing force• Various fi nishes available upon special request
PERKOMATIC
Round Plates
Rectangular Plates
To locate a reseller or for product inquiries, please contact your nearest representative.
• Non-handed • Solid brass anchor plates• Adjustable spring and hydraulic mechanism• For interior doors up to 165 lbs (75 kg)• Various fi nishes available upon special request
• Non-handed • Solid brass anchor plates• Adjustable spring mechanism• For interior doors up to 100 lbs (50 kg)• Various fi nishes available upon special request
ø
3/32(2)
3/32(2)
6(152)
5 25/32”(147)
7/8(22)
1(25)
2(51)
1(25)
2(51)
R2
2015
/06
P
1 20
15/0
7
see more at: www.perkopower.com
ø
3/32(2)
3/32(2)
8(203)
7 25/32”(198)
7/8(22)
1(25)
2(51)
1(25)
2(51)
L Model
SOSS offers a unique range of products, from their famous invisible hinges to their unique Ultralatch® push-pull door latch. SOSS products can be installed in wood, metal and plastic doors and are used in a wide variety of applications from windows, cabinets, and partitions to offi ce, commercial, and medical applications.
www.soss.com
A.870
Montreal T. 514.636.6466 • F. 514.636.6454Toronto T. 416.241.4445 • F. 416.241.1989
Calgary T. 403.250.9333 • F. 403.250.1160Vancouver T. 604.279.2524 • F. 604.279.0577
To locate a reseller or for product inquiries, please contact your nearest representative.
R2
2015
/06
P
1 20
15/0
7
• For wood and metal doors
• Cannot be seen or tampered with when closed
• Available in a wide range of sizes
• Smooth operation
• Fire rated models available
• Power transfer hinge model available
• Available in a variety of fi nishes
• Single acting, Grade 1 push/pull latch
• Meets ADA requirements
• For doors 1 3⁄8" (35 mm); 1 3⁄4" (44.5 mm);2" (50 mm) thick
• 2 3⁄8" (60 mm) or 2 3⁄4" (70 mm) backset
• Privacy, passage, and dummy functions available
• Available in a variety of fi nishes
Ultralatch® Push/Pull Lockset
• For light to heavy wood doors
• Cannot be seen or tampered with when closed
• Adjustable closure speed
• Opens 180°
• Available in a variety of fi nishes
Invisible Spring Door Closer
MAGNETIC DOOR HOLDERS & STOPSBARREL HINGES POWER TRANSFER INVISIBLE HINGE
see more at: www.soss.com
Invisible Hinges
Since 1942, the Viro brand has become known for the build quality of its security products. Viro offers a wide range of products to satisfy many different applications.
www.viro.it
VARIOUS PADLOCKS DISC LOCKS
TWISTED CABLE LOCK
MORTISE LOCKS ELECTRIC LOCKS & STRIKES
ELECTRIFIED GATE LOCKS
A.920
Montreal T. 514.636.6466 • F. 514.636.6454Toronto T. 416.241.4445 • F. 416.241.1989
Calgary T. 403.250.9333 • F. 403.250.1160Vancouver T. 604.279.2524 • F. 604.279.0577
To locate a reseller or for product inquiries, please contact your nearest representative.
R2
2015
/06
P
3 20
15/0
7
Padlocks
Adjustable Locking Bars
Solid Brass Cam Locks
FEATURES AND BENEFITS
• ISO 9001: 2008 Quality system certification
• Full range of security products
• Customized padlocks
• Patented key profiles available
see more at: www.viro.it
Spranga Locking Bar
Marine Padlock
PanzerArmouredPadlock
Colourful Panic Bars
Van Lock