Upload
khangminh22
View
0
Download
0
Embed Size (px)
Citation preview
All prices, terms and availability subject to change without notice.
| 2 Options for OrderingOnline: Orders can be placed through our e-commerce website, www.targetdistributing.net. A Login ID and password can be requested by contacting Joe DeBoever. (574-252-0252, or [email protected]). Credit Card information cannot be updated through the website.
Phone: Orders placed by phone are input directly to our order system This makes the process more efficient and allows us to provide you with information on current prices and product availability. To assure a smooth order experience we ask you to take the following steps:
Prior to Calling:• Know Your Customer Number. (This can be found on the back of your catalog or
the top line of your invoice under “Customer ID”)• Complete your order including part numbers and quantities.
When Calling:• Provide us with your customer number.• Give your company’s purchase order number (if applicable)• Indicate your preferred shipping method. (UPS Ground, Next Day Air, etc.) and
need by date. • Payment method (COD or Credit Card) - if you need to update a credit card
number let us know. • Provide us with Part Number followed by Quantity
Fax: Fax orders to 888-827-9243. Indicate customer number, best contact number and a name for questions.
Order Add-Ons and Changes: To the best of our ability we will package any additional items with your original order as long as it is prior to invoicing. It we are unable to add to the existing package it will be treated as a separate order. To avoid additional shipping and handling charges, make sure your order is complete before it is placed.
Back Orders: Will be shipped to you with your next order or as instructed by you. Back orders older than 60 days will be cancelled unless you instruct otherwise.
All returns are subject to a 20% restocking charge.
Permission to return any item mus be requested within 14 days from the invoice date.
Returned items must be accompanied by a copy of the invoice and reason item is being returned.
Items purchased on a closeout special or special order items may not be returned.
All prices, terms and availability subject to change without notice.
3|Shipping$25.00 Shipping on Orders over $1,000
Free Shipping on Orders Over $1,500
Excludes Briggs Engines, Short Blocks and & BackordersBriggs Engines & Short Blocks Also Will Not Count Towards $1,000 or $1,500
minimum required to received special shipping rates.
Shipping Method: Shipped via UPS Ground unless otherwise specified. Cost isdetermined based on the dimensional weight of the package.
Alternative Shipping Options: Shipping via USPS Priority Mail (2-3 Day Service) including flat rate package options.
Drop Ship Orders are assessed a $5 fee.
Looking To Save Money on Shipping?
Choose “Best Way” Shipping OptionWe will compare UPS and USPS Ground and ship by the cheaper method. If you have a need by date, please include with your order.
Payment TermsAvaliable Options: COD, COD Certified Funds, Certified Funds in Advance or Credit Card
Open account forms are available upon request and a personal guarantee signature isrequired. Terms of open accounts are Net 10. Past Due Account will be placed on CODor Credit Card.
Returned Checks: Certified funds are required immediately to cover a returned check. A $35 returned check fee will be added to the amount due. Any account having a returnedcheck (for any reason) will be placed on COD, Certified Check. If legal action is requiredfor collection of bad debt, the customer is responsible for all legal fees.
Refused Shipment: $20 Service Charge will be added for a refused shipment.
Special Order Items: May not be returned ro cancelled once order has been placed. Prepayment is required on special orders.
Warranty: Target Distributing makes no warranties what so ever, expressed or implied, oral or written. Many products do carry limited warranty from the manufacturer and these products are subject to approval of the manufacturer before replacement or credit is issued. We will help you as much as possible to obtain replacement or credit.
Disclaimer: All products in this catalog are intended for aftermarket use only. All references to manufacturer name or part number is strictly intended for reference only and does not constitute an endorsement by the said manufacturer. Illustrations may not always be correct and are meant only as a graphic representation of the product.
All prices, terms and availability subject to change without notice.
| 4Hours of Operation
Hours: Monday to Thursday
Friday
8:00 AM to 4:30 PM
8:00 AM to 3:00 PM
Eastern Time
2020 Holiday Schedule
New Year’s Day
Good Friday
Memorial Day
Independence Day
Labor Day
Thanksgiving
Wednesday
Friday
FridayMonday
Friday
FridayMonday
WednesdayThursdayFriday
January 1st, 2020
April 10th, 2020
May 22nd, 2020May 25th, 2020
July 3rd, 2020
September 4th, 2020September 7th, 2020
November 25th, 2020November 26th, 2020November 27th, 2020
Christmas 2020
Closed Starting On Thursday December 24th, 2020
And Will Be Closed Until After the New Year’s Holiday
We Will Reopen on Monday January 4th, 2021
All prices, terms and availability subject to change without notice.
5|SeatSprocket HubStandard CaliperStandard RotorSteering WheelWheel
Brake BleederBrake FluidBrake LineBrake Line FittingsBrakesDrum & Sprocket AssemblyMechanicalRotor Guard
Breather Adapter FittingsBriggs & Stratton LO206Briggs LO206 Accessory KitBriggs Crankshaft ToolBriggs AftermarketChoke SpringFuel Pump RiserGasketsRain HoodThrottle KitsTools
Bumper Mount HardwareButterfly Clamps
CCable & HousingCable HousingCable StopsCamber Rod End KitCarb KitsBurrisMikuniTillotsonWalbro
Carb WrenchCatch TankChainChain Cover/GuardChain Guard Bolt KitChain ToolsChain LubeClevis & PinChest ProtectorsCloneChain CoverExhaust GasketsExhaust NutsExhaust SilencerThrottle Kits
ClutchBolt KitCoverCrank WasherKeysLiningsOilSpiral Snap RingSprocketThrust Bearing
ClutchesCometMax TorqueNoramPremier
Coleman StarterComet20 Series30 Series
7473
7373
73-7474
78-798181
86-8788
13, 8848
44-4567
5959605959596059
603737
59, 82373784844241
56604341485959
605858285888
65, 6767, 78
6765, 6736, 67
6767
29, 6767, 76
6767, 76
6767676767
AAir BoxAir Filter ClampsAir FiltersFabricFoamPre-Filters
Air Filter AdaptersAnimal Aftermarket PartsGasketsOil Fill PlugPulse PlugThrottle Kit
Animal Valve Spring ToolAnimal Crankshaft Hold ToolArm RestraintsArmadillo Chest/Rib VestAutolite Spark PlugsAxlesBearing FlangesBearing HangersBearingsCassettesKeysLock CollarsSnap RingsSteel
AzusaBrakesChain CoverDrum & Sprocket AsseblyFront SpindlesSprocketsSprocket HubSteering Shaft AssemblySteering WheelWheelsWheel Weights
BBalaclavasBand BrakeBead BreakerBead Locks & O-RingsBeltsBearing FlangesBearing HangersBearingsAxleKing PinSpindleThrustWheel
Body Fastener KitBolt KitsBrakeBodyBumperCaliperChain CoverChain GuardClone Choke & Lock ScrewClutchExhaustFuel TankHeaderMaster CylinderMinilite CaliperMinilite RotorNerf BarPitman Arm
40 SeriesDisc BrakeTorque Converters
Conical WashersCrankshaft Holding Tool
DDaido Kart ChainDenso Spark PlugsDWTAlumiLite WheelsATV WheelsM-Series Wheels
EEK Kart ChainEconomy ChainEngine Kill ButtonEnginetics Brake PartsEVSExhaust GasketsExhaust Springs
FFace ShieldsVegaZamp
Fiberglass SeatsFilter AdaptersFilter ClampsFilter CleanerFilter OilFlagsFlange NutsFlathead Carb WrenchFlathead Throttle SpringFlywheel ScreensFoam Pre-FiltersFoam Seat PaddingFront SpindlesFuel FiltersFuel LineFuel Line ClampsFuel Line FittingsFuel PumpsMikuniWalbro
Fuel TanksAluminumPlastic
Fuel Tank Screws
GGasketsAnimal/Briggs AftermarkettExhaust
GlovesKart RacewearZamp
Graphic Saver Kit
HHeader BoltsHeader PipesHeader Sleeve/WrapHelmet BagHelmet PartsHelmets, Zamp
67, 69, 7136, 67
676767
42, 57, 6765656565
59-6537606582
8-1213
13, 88
1313
78-7913
86-8713, 88
6778
85858559
787879798882
38-3937-3836, 67
3938, 71
6644
3878-7967, 76
7486-87
673829292927292928
14-2828
25-2814-2021-24
66
30-3132-33
35643469
13, 88
3968
40-42404241
39388864457888
51, 56-5757
51, 567174737171897888868774
69-7059, 82
80808081
8079
818067
78-7978-79
78
474988
67, 76757555
56-5751-55
All prices, terms and availability subject to change without notice.
| 6 Helmet SupportEVSImpactKart RacewearTeam Valhalla
Helmet Support Straps
IImpactArm RestraintsBeltsGear BagHelmet SupportHelmet Support Strap
Index WashersInner Throttle CablesIridium Spark Plugs
JJacketsJam Nuts
KKart ChainKart Chain ToolsKart RacewearKing Pin BearingsKlotzOilAssembly LubeChain LubeFilter CleanerFilter OilNitro Power Additive
LLock CollarsLongacreSteering Quick DisconnectTire DurometerTire Gauges
MMaster Cylinder CapMaster Cylinder Hex BoltMax TorqueBox Stock ClutchClone ClutchD DrumDraggin Skin ClutchDry Moly LubricantMax-Lube ClutchSS ClutchV-Belt Clutch
MCP Brakes10” Brake DiscBilletFront BrakesMini-Lite BrakesStandard Brakes
MikuniCarb KitFuel Pump
Motor MountsMounting Brackets
N
46484645
47-48
4848484848698568
4683
39-3939
46-47, 69-7058
7272
38, 71717172
59
844343
6567
25-282727272527282628
59, 61-645962646361
7880
76-7882
Neck Brace/SupportNoram1600 Series ClutchArena ClutchCheetah ClutchEnforcer ClutchGear Reduction BoxGE Series ClutchGE Ultimate ClutchMini Cup ClutchStar Clutch
Number PanelsNumbers
OOdenthal Motor MountsOil Catch TankOil, ClutchOil Fill PlugOil KlotzOuterwears Pre-FiltersOval Seat
PPedalsAdaptorBrakeClevisCoversThrottle
Pit PartsBead BreakerSprocketsSprocket GuardSprocket HubsThrottle Cables
Plastic SeatsPre-FiltersPremierClutch SprocketsMagnum ClutchStinger ClutchTitan 3/4” World FormulaTitan Mini Cup Clutch
Pulse Plug, Animal
QQuick Disconnect (Steering)
RRace Suit, YouthRacer’s TapeRacing FlagsRatio RiteRib VestsRLVAir Box FiltersBead BreakerExhaust Silencer (4-Cycle)Header PipesIntake SilencersYamaha Box Muffler
Robic StopwatchesRocketboy StrapRod Anchor
SSafety Pins
45-46, 4814-20
1817161820141519198989
7613, 82
2781727370
6665646665
433636368570
73-7421-24, 28
282122232481
84
49838971
44-45
744374757474908966
87
Safety WireSafety Wire PliersSeat BeltsSeat PaddingSeatstFiberglassOvalPlasticSprint
Seat Bolt KitSeat Rubber GrommetsSeat StrutsSeat WashersShoesSpark PlugsAutoliteChampion (LO206)DensoIndex WashersResistor Caps
SpindleBearingsNutsSpacers
Sprint SeatsSprocket Bolt KitSprocket GuardsSprocket HolderSprocket HubsSprocket Hub Bolt KitSprockets#40 ChainAzusa EconomyDrum & Sprocket AssemblyPit Parts
Stagger Control StrapStarter NutsStartersSteeringQuick DisconnectShaft AssemblyShaft Block& Lock
Steering Wheel Bolt KitSteering WheelsStick-On NumbersStopwatchesSwift Magnesium Wheels
TTach MountsTapeTeam Valhalla360 Plus DeviceChest ProtectorRib VestSeat Pad Kit
Tear-OffsTear-Off Post KitThrottleCable & HousingCablesClevisClevis & SpringFittingsRod Spring
Throttle KitsThrottle SpringsTie Rod EndsTie RodsTillotson Carb KitsTire Changing ToolTire Durometer
878748
69-7069-71
70696969
67, 69, 7169
70-716949
6710676969
58595870
36, 6736-37
3636
36, 67
37373736898866
8484846784899041
8483
4544
44-45695656
858587
66, 878566
86-87868383794243
All prices, terms and availability subject to change without notice.
7|Tire GaugesTire TubesTires, Yard KartTri-Flow Lubricant
VValve Spring ToolValve StemsVegaFace Shields
WWalbroCarb KitsFuel Pump
Weight BracketsWheelsAzusaDWTSwift
Wheel Bead Lock & O-RingWheel BearingsWheel Bolt KitWheel HubsWheel NutsWheel Weights
YYamahaBox Muffler (Can)Cable Housing AnchorCarb Cable AnchorThrottle Spring
Yard Kart Tires
ZZampFace ShieldsGlovesHelmetsHelmet BagHelmet PartsReplacement LinersShoesSizing ChartsYouth Race Suit
434242
38, 71
8840, 42
57
797982
40-4242
40-42414158
42, 5757
41-4241
7485858642
51, 5649
51-55555651495049
All prices, terms and availability subject to change without notice.
| 12Briggs & Stratton LO206 Engine
Part Number DescriptionBS201 LO206 Engine
BS555715 Sealed shortblock
Parts
Part Number DescriptionBS19433 Flywheel wrench
BS19584 Flywheel puller
BSBS26826 Valve spring
BS222698S Flywheel key
BS299819S Oil seal
BS555545 Carburetor spacer
BS555550 Valve retainer
BS555551 Intake valve
BS555552 Exhaust valve
BS555585 Idle mixture kit
BS555586 Idle speed kit
BS555590 Throttle valve (senior slide)
BS555591 Carburetor float
BS555592 Float bow gasket
BS555593 Emulsion tube
BS555594 Pilot jet
BS555595 Throttle cable cap gasket
BS555596 Throttle return spring
BS555601 O-ring seal
BS555602 Needle jet
BS555603 Throttle cable cap
BS555605 Carburetor overhaul kit
BS555610 O-ring seal
BS555635 Cylinder head assembly
BS555644 Metric screw
BS555645 Valve guide bushing (.002” over)
BS555646 Hex flange metric nut/screw
BS555647 Throttle cable boot
BS555648 Needle float valve
BS555650 Needle valve retainer
BS555653 Float bowl
BS555658 Carburetor assembly
BS555659 Carburetor bowl drain
BS555679 Rocker cover (black)
BS555680 Cylinder shield (black)
BS555683 Flywheel
BS555690 Heat disperser (LO206)
BS555699 Control panel
BS555702 Flywheel guard
BS555704 Blower housing
BS555718 Ignition module - 206 Ignition (6,100 rpm)
BS555719 Wire - spark plug
BS555723 Cylinder head gasket (LO206)
BS555725 Junior PVL ignition (4,100 rpm)
Parts Continued
Part Number DescriptionBS555726 Carburetor locking cap
BS555728 Junior 206 throttle slide - .285 black
BS555729 Air filter w/clamp
BS555731 Hex jam nut
BS555732 Junior 206 throttle slide - .310 black
BS555733 Throttle slide - .440 Red
BS555734 Throttle slide - .520 Blue
BS555735 Throttle slide - .342 purple
BS555737 Spark plug
BS555740 Throttle slide - .490 Green
BS555741 Throttle slide - .570 Yellow
BS555742 Main jet stock (2 per package)
BS555778 Fan - flywheel
BS557028 Starting switch
BS557118 Valve guide bushing (standard)
BS591302 Cup - flywheel
BS691343 Push rod guide
BS691663 Oil drain plug - (magnetic)
BS691678 Hex washer head screw
BS691686 Oil drain plug
BS691736 Flywheel washer
BS691885 Intake gasket
BS691890 Rocker cover gasket
BS692550 Oil seal
BS692557 Hex washer head screw (rocker top & sides)
BS692600 Breather tube
BS692602 Stop wire (used on 8001 & 8002)
BS693517 Push rod
BS694088 Cylinder head gasket plate
BS694543 Rocker arm adjuster, US
BS694544 US rocker arm stud
BS695287 Rewind starter
BS695630 Stop wire
BS699200 Hex screw cylinder insert
BS699201 Screw (flywheel fan)
BS699230 Hex washer head metric screw (cylinder head plate)
BS699477 Metric screw
BS699479 Metric screw
BS699481 Hex washer head metric screw (rocker cover bottom)
BS699482 Hex washer head metric screw (cylinder head)
BS793379 Stop wire (type 8003)
BS794451 Hex washer head metric screw
BS794822 Screw (cylinder shield)
BS797440 Metric rocker arm adjuster kit
BS797441 Metric rocker arm stud
BS797442 Metric cylinder head plate
BS797443 Rocker arm - metric
BS597338 Mikuni fuel pump - replaces 808656
All prices, terms and availability subject to change without notice.
13|
Part No. Description
BS201KIT 206 Accessory Kit
Briggs LO206 Accessory Kit
• B206C - Briggs Animal/World Formula/LO206 Copper Exhaust Gasket• LA792KIT - Braided Header Wrap Sleeve, 7/8” x 18”• BS555729 - Briggs “Green” Air Filter with Clamp• KF16019 - LO206 Fuel Pump Riser with Hardware• CK1011B - Strut Mount Oil Catch Tank - Black• GPG1227 - Briggs Chain Cover• KM609 - Animal Throttle Kit (No Plate)• KM618 - Animal Breather with Bushing• KM619 Animal Pulse Plug• KM865 Nylon Brake & Throttle Line, 6 ft.• PP801 Flat Cable Clamp• RLV5507 - RLV206 Jr. Spec Pipe• RLV4104 - RLV Exhaust Silencer 1-5/16”• VK002 - Animal/F2000 header bolt kit (metric)• Chain Guard Bolt Kit (SAE)
All the things needed to accompany the LO206 Engine Package.
Motor Not Included
Part No. Description
KF16019 206 Fuel Pump Riser
206 Fuel Pump Riser 206 Choke SpringPart No. Description
KM602 206 Choke Spring
Part No. Description
OW1035TBLK PreFilters 3” x 3” Black
Outerwears Prefilter
206 Rain HoodPart No. Description
KF12019 206 Air Filter Rain Hood
Part No. Description
KM601 Crankshaft Holding Tool
Crankshaft Holding Tool
Oil Catch TankPart No. Description
CK1011 Strut mount catch tank
CK1011B Strut mount catch tank (Black)
All prices, terms and availability subject to change without notice.
NORAM GE Series Clutch4-Cycle 3/4” Bore
NORAM’s GE Series Clutch is a standard in 4-Cycle Racing. Its strong reputation is supported by over 40 years of production and satisfied customers worldwide.
Features:• Stamped drum provides stable and consistent runout.• Heat treated shoes last longer.• Ability to change settings allows for fine tuning to different track layouts.• Variable spring assortment allows flexibility in engagement settings.• Economical to maintain and able to make it to the finish line first.
Available in #35 Chain:11-19 tooth & 21 toothwith light or heavy shoes
Available in #219 Chain: in 20 Tooth Only
20 Tooth No LongerAvailable in #35 Chain
| 14
SHOE SETTINGSNOTE: Clutch Illustrations are shown as viewing the open end of an INBOARD mounting. For shoe settings on an OUTBOARD mounting, use the reverse shoe positions.
Standard Springs NA020 (Red)
Part No. DescriptionNA11211 11 tooth - bushing - #35 chain
NA04112B 12 tooth - bushing - #35 chain
NA11713N 13 tooth - bearing - #35 chain
NA16514N 14 tooth - bearing - #35 chain
NA13215N 15 tooth - bearing - #35 chain
NA13416N 16 tooth - bearing - #35 chain
NA14917N 17 tooth - bearing - #35 chain
NA24618N 18 tooth - bearing - #35 chain
NA21919N 19 tooth - bearing - #35 chain
NA23021N 21 tooth - bearing - #35 chain
NA219D20 20 tooth - bearing - #219 chain
GE Replacement Drums
No. Part No. Description
2 NA04 Snap Ring
NA015 Bearing (13 tooth & up)
NA036 Bushing (11 tooth)
6 NA045 Steel Washer (11 tooth)
6 NAW065 Fiber Washer (11 tooth)
NA081 Bushing (12 tooth)
6 NA0066 Fiber Washer
5 NA138 Hub (11 tooth)
5 NA046 Hub (12 - 21 tooth)
3 NA158 Light Shoe
3 NA159 Heavy Shoe
GE Clutch PartsPart No. Color Heavy
(RPM)Light(RPM)
NA013 Brown 1620 1800
NA017 Black 1820 2100
NA020 Red 1950 2450
NA030 White 2420 2740
NA040 Blue 2530 2960
NA050 Purple 2575 3010
NA060 Green 2975 3440
NA079 Orange 3100 3660
NA086 Brown 3380 4020
NA088 Red 3530 4320
GE Clutch Springs
Part No. Description
NARC60 11 tooth - bushing - #35 chain
NARC61 12 tooth - bushing - #35 chain
NARC64 13 tooth - bearing - #35 chain
NARC66 14 tooth - bearing - #35 chain
NARC68 15 tooth - bearing - #35 chain
NARC70 16 tooth - bearing - #35 chain
NARC72 17 tooth - bearing - #35 chain
NARC74 18 tooth - bearing - #35 chain
NARC76 19 tooth - bearing - #35 chain
NARC80 21 tooth - bearing - #35 chain
NAGE21920 20 tooth - bearing - #219 chain with heavy shoes & white springs
GE Clutch
Heavy Shoes: Insert H after Part Number
All prices, terms and availability subject to change without notice.
15|
Features:• Stamped drum with venting holes for max airflow, cooling, and aerodynamics.• Alternate shoe configurations easily conform to your unique driving skills.• Variable torque settings dramatically decrease slippage.• Replaceable sprockets eliminate frequent, and costly, drum replacement.• Thrust bearings contribute to an exceptionally smooth performance.• High tech linings provide maximum coefficient of friction.
Standard springs are NA060 (Green)
Available in #35 Chain: 12 - 20 ToothAvailable in #219 Chain: 16 - 22 Tooth
NORAM GE Ultimate Clutch4-Cycle, 3/4”, #35 chain or #219 Chain
Versatile - High Performance - the GE Ultimate will consistently deliver a trophy-winning race, day after day, season after season. Noram’s GE Racing Clutch, the undisputed karting industry legend for more than 40 years, is designed to seamlessly mesh with the skill level of the driver and track conditions.
Part No. DescriptionNA04 Snap Ring
NAC137 Thrust Bearing Kit
NAU061 Clutch Hub
NAU215 Washer
NAU229 Light Clutch Shoe
NAU230 Heavy Clutch Shoe
NAU433 Sprocket Snap Ring
NAU698 Clutch Drum
Clutch Parts
Part No.
Color HeavyRPM
LightRPM
NA013 Brown 1600 1800
NA017 Black 1800 2100
NA020 Red 1900 2200
NA030 White 2300 2700
NA040 Blue 2500 2900
NA050 Purple 2600 3000
NA060 Green 3000 3400
NA079 Orange 3100 3600
NA086 Brown 3400 3900
NA088 Red 3700 4300
Clutch Springs
Part No. Description
NAU**35 #35 Chain Complete Clutch
NAU**219 #219 Chain Complete Clutch
GE Ultimate Clutch
**Specify Tooth Size When OrderingCannot Be Ordered With Heavy Shoes
Part No. Description
APBSJ** #35 Chain Sprocket
APBSJ219** #219 Chain Sprocket
Replacement Sprockets
**Specify Tooth Size When Ordering
All prices, terms and availability subject to change without notice.
| 16
Features:• Removable sprocket to save you time and money.• Precision machined pressure plate for more consistent engagement.• Superior linings on copper disc provide excellent engagement & lock up.• Easy adjustment of engagement springs.
Factory Preset Engagement of 3,900 - 4,000 rpm
Clutch Comes COMPLETE with: #35 Chain - 13, 14, & 15 tooth sprockets#219 Chain - 16, 17, & 18 tooth sprockets
ACCEPTS PREMIER BSJ SPROCKETS!
NORAM Cheetah Clutch4-Cycle Disc Clutch, 3/4”, #35 Chain
The Cheetah, the fastest animal on the planet, is engineered to make you the fastest person on the track! This 4-cycle disc clutch is designed to put less weight on the crankshaft, less spring binding and better lock-up, as well as cooler and longer running.
Part No. Description
NAC1315 Complete Clutch Assembly - #35 chain (13, 14, 15 tooth)
NAC21916 Complete Clutch Assembly - #219 chain(16, 17, 18 tooth)
Cheetah Clutch
Item No.
Part No. Description
1 NAC435 Snap Ring
2 SEE REPLACEMENT SPROCKETS
3 NAC136 Needle Bearing (14 tooth & up)
4 NAC695 Drum Housing
5 NAC436 Sprocket Retaining Ring
6 NAC214 Thrust Washer
7 NAC137 Thrust Bearing
8 NAC214 Thrust Washer
9-10 NAC786 Support Plate With Gear
11 NAC249 Friction Disc
12 NAC250 Floater Disc
13 NAC249 Friction Disc
14-15 NAC012 Pressure Plate Assembly
16 NAC253 Lever (6 Required)
17 NAC157 Dowel Pin (6 Required)
18 NAC254 Lever Support
19 NAC228 Spring (6 Required)
20 NAC042 Sprocket Head Cap Screw (6 Required)
21 NAC437 Retainer (6 Required)
22 NAC043 Adjusting Screw (6 Required)
23 NAC215 Outer Thrust Washer
Cheetah Clutch Parts
Part No. Description
APBSJ** Replacement Clutch Sprocket #35 chain
APBSJ219** Replacement Clutch Sprocket #219 chain
Replacement Sprockets
**Specify Tooth Size When Ordering#35 Chain: 12-20 Tooth#219 Chain: 16-2 Tooth
All prices, terms and availability subject to change without notice.
17|
Part No. Description
NAAR** Clutch Assembly - Light Shoes
NAAR**H Clutch Assembly - Heavy Shoes
Item No. Part No. Description
NA018 Needle bearing (10 tooth)
NAB009 Bushing ( 9 tooth)
4 NAH400 Clutch hub
5 NASP01 Spacer
2 NAW063 Fiber washer
3 NA158 Light shoe
3 NA159 Heavy shoe
12
3
4
5
6
Standard Springs are NA020 (Red)
NORAM Arena Clutch4-Cycle, 3/4” Counterbore, #35 Chain
Outboard Only
Noram’s Arena Clutch is the ideal clutch for indoor or short track racing.
Available with Light or Heavy Shoes in 9 and 10 Tooth
Arena Clutch
Part No. Description
NAD638T 10 Tooth Drum Only
NAD641T 9 Tooth Drum Only
Replacement Drums
Clutch Parts
Part No. Color Heavy(RPM)
Light(RPM)
NA013 Brown 1620 1800
NA017 Black 1900 2100
NA020 Red 2040 2500
NA030 White 2470 2900
NA040 Blue 2650 3200
NA050 Purple 2900 3600
NA060 Green 3200 4000
NA079 Orange 3500 4400
NA086 Brown 3850 4900
NA088 Red 4200 5500
Clutch Springs
**Specify Tooth Size When Ordering (9 or 10 Tooth)
All prices, terms and availability subject to change without notice.
| 18
The NORAM 1600 Series Clutch is designed for more horsepower and eliminates the need for oversizing electric motors to reach starting torque requirements.
Standard Springs NA107 (Purple)
The NORAM Enforcer is engineered to respond to a wide range of power demanding race applications.
Standard Springs NA107 (Purple)
Available in#35 Chain: 12-15 Tooth & 17-18 Tooth#40/41 Chain: 10 tooth
1600 Series Clutch4-Cycle, 1” Bore, 1/4” Keyway
3-15 HP Engines
Features:• No-load Starting• Overload Protection• Speed Control• 360° Shoe Contact Surface
3 Shoe Design gives 360° of contact surface giving max torque efficiency with less slip and greater operating range. Shoe linings also have a high coefficient of friction and are resistant to wear, fading and troublesome vibration.
Part No. Description
NA160153 Clutch (10 tooth) #40/41 chain (Outboard only)
NA160155 Clutch (14 tooth) #40/41 chain (In or outboard)
NA160157 Clutch (17 tooth) #35 chain (In or outboard)
NA1600428 Clutch (15 tooth) #428 chain (In or outboard)
1600 Series Clutch
Part No. Description
NA11600743 1600 drum (10 tooth) #40/41 chain
NA11600738 1600 drum (14 tooth) #40/41 chain
NA11600739 1600 drum (17 tooth) #35 chain
NA11601331 1600 drum (15 tooth) #428 chain
Replacement Drums
Part No. Color RPM
NA104 Red 1450
NA105 White 1650
NA106 Blue 1800
NA107 Purple 2050
NA108 Green 2150
NA110 Plain 2400
1600 Series Springs
Part No. Description
NA3000122 Needle Bearing - 160153
NAC096 1600 series clutch shoe
NA2400050 Washer inner (14 - 17T)
NA2400120 Washer outer (14 - 17T)
1600 Series Parts
NORAM Enforcer Clutch4-Cycle, 1” BoreOutboard Only
Part No. Description
NA190073 Snap ring
NA240104 Steel washer
NA300122 Needle bearing
NA150264 Shaft
NAS142 Clutch Shoe
NAR180 Rotor Assembly (complete)
Enforcer Parts
Part No. Color RPM
NA104 Red 1450
NA105 White 1650
NA106 Blue 1800
NA107 Purple 2050
NA108 Green 2150
NA110 Plain 2400
Enforcer Springs Part No. Description
NAD14010 10 - tooth drum (#40/41 chain)
NAD14212 12 - tooth drum (#35 chain)
NAD14413 13 - tooth drum (#35 chain)
NAD14614 14 - tooth drum (#35 chain)
NAD14815 15 - tooth drum (#35 chain)
NAD15217 17 - tooth drum (#35 chain)
NAD15418 18 - tooth drum (#35 chain)
Enforcer Replacement Drums
Part No. Description
NA180153 10 Tooth Clutch
#40/41 Chain Enforcer Clutch
Part No. Description
NAENF** Clutch #35 Chain
#35 Chain Enforcer Clutches
**Specify Tooth Size When Ordering
All prices, terms and availability subject to change without notice.
19|
Approved and Designed Exclusively for the Tecumseh Star Engine
Standard Springs NA104 (Red)
Engineered exclusively for the Mini-Cup Racing Series.
Available in #35 Chain - 12 - 18 Tooth
Standard Springs NA104 (Red)
Features:• Turned steel drum for perfect runout.• Heat dissipating holes (drum) for cooler operation.• 3 Shoe Design provides contact for more torque• Variable spring assortment allows flexibility in engagement settings.
Available in #35 Chain: 13 - 18 Tooth
NORAM Star Clutch4-Cycle, 1” Counterbore
Up to 18 HP Engines
NORAM Mini Cup Clutch4-Cycle, 1” CounterboreFor Up to 18 HP Engines
Part No. Color RPM
NA104 Red 2500
NA105 White 2800
NA106 Blue 3100
NA107 Purple 3400
NA108 Green 3700
NA110 Plain 4000
Star Clutch Springs
Part No. Description
NAB018 Bushing (13 & 14 tooth)
NAC079 Clutch shoes
NAN046 Bearing (15 tooth & up)
NAR131 Clutch hub with shoes
NAH414 Clutch hub only
NAW052 Washer
NAKY025 Clutch key
Star Clutch Parts
Part No. Description
NASTAR** Complete Clutch Assembly
Star Clutch
**Specify Tooth Size When Ordering
Part No. Description
NASD** Star Clutch Drum (13T - 18T)
Replacement Drums
**Specify Tooth Size When Ordering
Part No. Description
NAD761 12 - tooth drum
NAD762 13 - tooth drum
NAD763 14 - tooth drum
NAD764 15 - tooth drum
NAD765 16 - tooth drum
NAD766 17 - tooth drum
NAD767 18 - tooth drum
Replacement Drums
Part No. Description
NA04 Snap ring
NA015 Needle bearing (13 tooth & up)
NA081 Bushing (12 tooth)
NA0066 Fiber washer
NAH795 Clutch hub only
NAC039 Clutch shoes
NAR13001 Clutch hub with shoes
Mini Cup Clutch Parts
Part No. Color RPM
NA104 Red 1700
NA105 White 1850
NA106 Blue 2100
NA107 Purple 2400
NA108 Green 2550
NA110 Plain 2700
Clutch Springs
Part No. Description
NA1300**1 Complete Clutch Assembly
Mini Cup Clutch
**Specify Tooth Size When Ordering
All prices, terms and availability subject to change without notice.
| 20
Part No. Description
NAGB27575 2:1 Gearbox
Features:• Precision Machined Aluminum Die Cast Housings• High Performance Wet Disk Clutch• Standard SAE Mounting Hole Configuration• Oil Dip Stick with Built In Breather• Heavy Duty 428 Chain Driven• Self Contained Unit• Automatic Smooth Engagement• (4) M8 x 1, 21 MM Threaded Deep Output Mounting Holes
Models Also Available for OtherEngines, Call For Information
NORAM GB2-75752:1 Chain Driven Wet Clutch Activated UnitFor 3/4” Crankshaft Engine, Up to 10 HP
This product is designed for the robust demands of the OEM Rental and Karting Markets. Proven components ensure maximum run time and performance. Innovative design allows for a cost effective price.
Fits Predator 212cc, Honda GX160, Briggs Vanguard 6.5, Yamaha MZ175
GB2-7575 Reduction Gearbox
No. Part No. Description QTY Req.
14 NAGB044 Gasket 1 pc
15 NAGB161 Sleeve 2 pcs
16 NAGB262 Crank Spacer 1 pcs
17 NAGB134 Hex HD bolt 5 pcs
18 NAGB086 Lock washer 5/16” 5 pcs
19 NAGB046 Key 1 pcs
20 NAGB115 M8x1.25 - 30 mm bolt 4 pcs
21 NAGB119 M8 x 1.25 - 35 mm bolt 1 pc
NAGB042 Clutch service pack kit
NAGB033 Clutch disc
NAGB535 Clutch plate
GB2-7575 Parts (continued)No. Part No. Description QTY Req.
1 NAGB123 Bearing 1 pc
2 NAGB087 Top housing 1 pc
3 NAGB094 Bottom housing 1 pc
4 NAGB005 Plate clutch 1 pc
5 NAGB120 Bearing, PTO 1 pc
6 NAGB140 Sprocket shaft PTO 1 pc
7 NAGB023 Seal 1 pc
8 NAGB001 Dipstick/breather 1 pc
9 NAGB045 Gearbox gasket 1 pc
10 NAGB111 Plug 1 pc
11 NAGB273 Seal ring 1 pc
12 NAGB117 Taptite screw 7 pcs
13 NAGB109 Screw 2 pcs
GB2-7575 Parts
All prices, terms and availability subject to change without notice.
21|
The Magnum Clutch sets the standard for 4-cycle entry level racers. Its design greatly improves power transmission through a stiffer, more stable drum design. It offers medium or aggressive engagement settings at an affordable price.
Standard Spring, Heavy Shoes AP1004
SHOE SETTINGS
Premier Magnum Clutch4-Cycle, 3/4” Bore, #35 Chain
Available in 11-21 Tooth with Light or Heavy Shoes
Part No. Description
APRC** Magnum Clutch (light shoe)
APRC**H Magnum Clutch (heavy shoe)
Magnum Clutch
**Specify Tooth Size When Ordering
Part No. Description
AP116** Magnum Clutch Drum
Magnum Drums
**Specify Tooth Size When Ordering
Part No. Color Heavy(RPM)
Light(RPM)
AP1003 Red 1750 2050
AP1004 White 2000 2350
AP1005 Blue 2250 2600
AP1006 Purple 3000 3500
AP1007 Green 3200 4000
AP1008 Mod. Orange 3500 4400
AP1009 Mod. Brown 3850 4900
AP1010 Mod. Red 4700 5500
Magnum Clutch Springs
Part No. Description
AP1201 Light shoe
AP1202 Heavy shoe
AP1720 Bushing (12 tooth)
AP3001 Needle bearing (13 tooth & up)
AP30006 Bushing (11 tooth)
AP1902 Retaining Ring (Drum)
AP11304 Hub assembly (11 tooth)
NA046 Hub assembly (12 tooth & up)
AP2403 Steel washer (11 tooth)
AP2404 Steel washer (12 tooth & up)
VK003 Mounting bolt & washer
AP2425 Crank spacer washer
AP238 Crank stepped end washer
AP2066 Fiber washer
Magnum Clutch Parts
All prices, terms and availability subject to change without notice.
| 22
Standard Springs APSS52 (Orange)
The “Stinger” is a powerful three shoe racing clutch featuring a one piece stamped machined drum with interchangeable sprockets. It also utilizes Premier’s exclusive shoe/spring/hub
Shoe/Spring/Hub CartridgePremier’s exclusive shoe/spring/hub cartridge allows for quick and easy set-up changes.
Premier Stinger Clutch4-Cycle, 3/4” Bore, #35 or #219 Chain
Part No. Description
APBSJ** #35 Chain Sprocket
APBSJ219** #219 Chain Sprocket
**Specify tooth size when ordering
Replacement Sprockets
Part No. Description
APSC** #35 Chain Clutch
APSC219** #219 Chain Clutch
Stinger Clutch
**Specify tooth size when ordering
Part No. DescriptionAPSC004 Blue
APSC006 Orange
APSC008 Black
APSC010 Yellow
APSC012 Purple
APSC014 White
APSC016 Green
Cartridge Kits
Part No. Color RPMAPSS046 Pink 1800
APSS047 Dk. Green 2100
APS048 Brown 2300
APSS51 Blue 2700-2900
APSS52 Orange 3000-3200
APSS53 Black 3300-3500
APSS54 Yellow 3700-3900
APSS55 Purple 4100-4300
APSS56 White 4500-4700
APSS57 Green 5000-5200
Clutch Springs
Part No. Description
APSD Replacement drum
APSP1204 Clutch shoe
APSP1310 Clutch hub
APSP15448 Clutch hub shaft
AP1902 Snap ring (drum)
APSP1908 Sprial snap ring (sprocket)
APSP1914 Snap ring (cartridge)
APSP2033 Cover bolt
AP2404 Spacer (outside)
APSP2416 Thrust spacer
APSP27447 Outside cover
APSP27449 Inside cover
APSP3005 Bearing (14-22 tooth)
APSP3012 Thrust bearing
APSP011 Clutch key
AP2425 Crank spacer washer
VK003 Mounting bolt & washer
AP238 Crank stepped end washer
AP219 Sprocket shim
AP2468 Fiber washer - hub shaft/hub
AP2066 Fiber washer - outer
Clutch Parts
Available in#35 Chain: 12-20 Tooth#219 Chain: 16-22 Tooth
All prices, terms and availability subject to change without notice.
23|
This computer designed clutch is the ultimate centrifugal clutch for 10 to 15 hp Briggs Animal or World Formula Engines.
Features:• Machined Drum with Interchangeable Sprockets; The Ultimate in Strength and Alignment.• Unique Hub and Shoe Design for Max Power Transmission.• Shoe/Spring/Hub Cartridge for Quick and Easy Set-Up Changes.
Standard Springs APTS015 (Orange)Available in:#35 Chain: 12-20 Tooth#219 Chain: 16-22 Tooth
Premier Titan 3/4” World Formula Clutch4-Cycle, 3/4” Bore, #35 or #219 Chain
For 10 - 15 HP Briggs Animal or World Formula
Part No. Description
APTC**34 #35 Chain Clutch
APTC219**34 #219 Chain Clutch
3/4” Titan Clutch
**Specify Tooth Size When Ordering
Part No. Description
APTP1314 Clutch hub
APSP3005 Bearing (14 – 22 tooth)
AP1902 Snap ring
APTC012 Clutch key
APSP2416 Thrust spacer
APSP3012 Thrust bearing
APTP454 Hub shaft
APTP10 Clutch shoe
APSP2033 Clutch dust cover bolt
APTP450 Clutch outside dust cover
APTP452 Clutch inside dust cover
APTP14 Clutch assembly snap ring
APMCD Clutch drum
APSP1908 Spiral snap ring - sprocket
AP2404 End play washer
AP2405 Cartridge spacer washer (back)
AP2425 Crank spacer washer
APTP34 Mounting bolt & washer
AP238 Crank stepped end washer
AP219 Sprocket shim
AP2468 Fiber washer - hub/hub shaft
AP2066 Fiber washer - outer
Clutch Parts
Part No. Description
APBSJ** #35 Chain Sprockets
APBSJ219** #219 Chain Sprockets
Replacement Sprockets
**Specify Tooth Size When Ordering
Part No. Color RPM
APTS104 Lt. Red 1800
APTS105 Lt. White 2100
APTS106 Lt. Blue 2400
APTS011 Blue 3100
APTS012 Green 3600
APTS013 Red 3800
APTS014 Yellow 4000
APTS015 Orange 4200
Clutch Springs
Part No. Description
APMCC60 Yellow
APMCC61 Orange
Spring Cartridge Kit
All prices, terms and availability subject to change without notice.
| 24
Standard Springs, APTS012 (Green)
This computer-designed centrifugal clutch is the ultimate for Mini-Cup Cars.Features:• Machined drum with interchangeable sprockets, the ultimate in strength and alignment.• Unique hub and shoe design for max power transmission
Available #35 Chain: 12-20 Tooth
Premier Titan Mini-Cup Clutch4-Cycle, 1” Counterbore, #35 Chain
Part No. Description
1 APMC012 Clutch hub
2 APSP3005 Bearing (14 – 22 tooth)
3 AP1902 Snap ring
4 APMC2010 Clutch key
5 APSP2416 Thrust spacer
6 APSP3012 Thrust bearing
7 APMC450 Hub shaft
8 APTP10 Clutch shoe
9 APSP2033 Clutch dust cover bolt
10 APTP450 Clutch outside dust cover
11 APTP452 Clutch inside dust cover
12 APTP14 Clutch assembly snap ring
13 APMCD Clutch drum
14 APSP1908 Spiral snap ring - sprocket
15 AP2404 End play washer
AP2405 Cartridge spacer washer (back)
AP2425 Crank spacer washer
APTP34 Mounting bolt & washers
AP219 Sprocket shim
Clutch Parts
Part No. Color RPM
APTS104 Lt. Red 1800
APTS105 Lt. White 2100
APTS106 Lt. Blue 2400
APTS011 Blue 3100
APTS012 Green 3600
APTS013 Red 3800
APTS014 Yellow 4000
APTS015 Orange 4200
Clutch SpringsPart No. Description
APMC** Titan Mini-Cup Clutch
Titan Mini-Cup Clutch
**Specify Tooth Size When Ordering
Part No. Description
APBSJ** Replacement Clutch Sprocket
Replacement Sprockets
**Specify Tooth Size When Ordering
All prices, terms and availability subject to change without notice.
25|The Draggin Skin by Max Torque is a popular choice of avid 4-cycle racers who are attracted by the ability to fine tune to the changing conditions of the race track.
Part No. Description
MTDSSR Spring ring
MTDSSR106 Spring ring snap ring
MTDS017 Washer - spacer for spring ring
MTDSSHS Sandstone shoes (set of 3)
MTDSDP 4 cycle drive plate assembly
MTDSFW Fiber washer
MTDSK900 Key - .900” x 3/16” - Outboard
MTDSK1000 Key - 1” x 3/16” - Inboard
MTSS118 Sprocket snap ring (10 tooth) #35
MTSS131 Sprocket snap ring (11 tooth) (#35)
MTSS143 Sprocket snap ring (12 tooth)
MTSS156 Sprocket snap ring (13 & up)
MTDSWTS 7 gram weight kit
MTDSWTS10 10 gram weight kit
MTDS07 Washer float - .690 x .3125 x .063
Available:#35 Chain: 10-25 tooth#219 Chain: 16 - 21 tooth
2 PC Max Torque Draggin Skin Clutch4-Cycle, 3/4” Bore, #35 or #219 Chain
Part No. Description
MTDSC2PC 2 pc Draggin Skin clutch only. Includes inboard & outboard key.
Draggin Skin Clutch Part No. Description
MTDSURM10T Trued Drum Only for 10 Tooth (#35 Chain)
MTDSURM11T Trued Drum Only for 11 Tooth
MTDSURM12T Trued Drum Only for 12 Tooth
MTDSURM13T Trued Drum Only for 13-25 Tooth
MT1000DS Trued Drum Only for Bully/SMC/Noram
Replacement Trued Drums
Part No. Description
MT10 #35 Chain 10 Tooth Sprocket
MT11 #35 Chain 11 Tooth Sprocket
MTDS* #35 Chain 12-25 Tooth
MTDS**219 #219 Chain 13-25 Tooth
Draggin Skin Sprockets
**Specify Tooth Size When Ordering
Part No. Description RPMMTDS054 Black 2300
MTDS056 Red 2500
MTDS058 Brown 2850
MTDS060 Green 3000
MTDS062 Blue 3275
MTDS064 Purple 3450
MTDS068 Yellow 3800
MTDS072 White 4300
Draggin Skin Springs
Draggin Skin Parts
Standard Springs are Purple (MTDS064)
All prices, terms and availability subject to change without notice.
| 26
The SS Series is the most popular style clutch used by the O.E.M. since its introduction in 1970. This clutch comes in many different configurations to meet any O.E.M. requirements.
Max Torque SS Clutch4-Cycle, 3/4” & 5/8” Bore
#35 or #40/41 Chain
Part No. Teeth Bore Chain
MTSS1041 10 3/4” #40/41
MTSS104158 10 5/8” #40/41
MTSS1158 11 5/8” #35
MTSS1258 12 5/8” #35
MTSS1234 12 3/4” #35
MTSS1334 13 3/4” #35
MTSS1434 14 3/4” #35
MTSS1534 15 3/4” #35
MTSS1734 17 3/4” #35
SS Series Clutch
Part No. Bore Description
MTSS0658 5/8” Bushing
MTSS0634 3/4” Bushing
MTSS58FW 5/8” Fiber washer
MTSS34FW 3/4” Fiber washer
MTSS1212 Dust cover
MTSS0258BP 5/8” Backing plate
MTSS0234BP 3/4” Backing plate
MTSS0258H 5/8” Hub assembly
MTSS0234H 3/4” Hub assembly
MTSS58SR 5/8” Shaft snap ring
MTSS34SR 3/4” Shaft snap ring
MTSSSHOE Clutch shoe
MTSS125 Dust cover snap ring
MTSS131 Sprocket snap ring (11 tooth) or 10T #40/41
MTSS156 Sprocket snap ring (13 tooth & up)
MTSS143 Sprocket snap ring (12 tooth)
Clutch Parts
Part No. Description RPM
MTSSBS Black Spring 3100
MTSSGS Green Spring 2500
MTSS032M Standard Spring 2200
MTSSBUS Blue Spring 1800
MTSS049 Yellow Spring 1500
Clutch SpringsPart No. Teeth Bore ChainMTSSDS1158 11 5/8” #35
MTSSDS1258 12 5/8” #35
MTSSDS1234 12 3/4” #35
MTSSDS1041 10 3/4” #40/41
MTSSDS1058 10 5/8” #40/41
MTSSDS**34 13-25 3/4” #35
Replacement Drum & Sprockets
Part No. Description
MTDSURM Universal Drum (13-25 Tooth)
MTDSURM12 Drum for 12 Tooth Only
MT** Sprocket (13-25 Tooth)
MT1041 Sprocket (10 Tooth) #40/#41
MT1258 Sprocket (12 Tooth) #35 - 5/8”
**Specify Tooth Size When Ordering
Standard Spring is MTSS032M (Silver)
All prices, terms and availability subject to change without notice.
27|
D Drum for Box Stock/Clone Clutches
Part No. Description
MT1000 Box Stock/Clone Replacement Drum
Drum & Washer Kit by Max Torque that allows you to use your Buller/Jammer/SMC/Premier Clutch gears on your Max Torque Box Stock/Clone
Designed by Max Torque Specifically for Clone Engines.
Available in #35 Chain: 10-25 Tooth
Standard Springs MTSSBS, (Black)
Use your Buller, Jammer, SMC and Premier Clutch Gears on your Max Torque Box Stock/Clone Clutch!
Kartech 2-Cycle Clutch Oil
Part No. Description
KMCL 2-Cycle clutch oil
Recommended for use in all wet type racing clutches.
Box Stock/Clone Clutch4-Cycle, 3/4” Bore, #35 Chain Only
Part No. Description
MTFW58 Fiber washer for 10 tooth
MTSW58 Steel washer for 10 tooth
MTSS0634 Bushing
MTSS34FW Fiber washer
MTSS1212 Dust cover
MTSS0234BP Backing plate
MTIKHUB Hub assembly
MTIK10HUB 10 & 11 tooth hub assembly
MTSS34SR Shaft snap ring
MTSSSHOE Clutch shoe
MTSS118 Sprocket snap ring (10 tooth) #35
MTSS125 Dust cover snap ring
MTSS131 Sprocket snap ring (11 tooth) or 10T (#40/41)
MTSS143 Sprocket snap ring (12 tooth)
MTSS156 Sprocket snap ring (13 tooth & up)
Box Stock/Clone Parts
Part No. Description
MTSS**34IK Max Torque Clutch #35 chain
MTSS219**34IK Max Torque Clutch #219 chain
MTSS1000IKMax Torque Clutch with D Drum For Aftermarket Sprockets (sprocket not included)
Box Stock/Clone Clutch
**Specify Tooth Size When Ordering
Part No. Description
MTSSDS**34 Drum & sprocket (10 – 25 tooth)
MTDSURM Drum only (13 - 25 tooth)
MTDSURM10 Drum only (for 10 tooth sprocket)
MTDSURM11 Drum only (for 11 tooth sprocket)
MTDSURM12 Drum only (for 12 tooth sprocket)
MT** Sprocket only #35 chain(10 - 25 tooth)
MT219** Sprocket only #219 chain (16 - 21 tooth)
Replacement Drum & Sprockets
**Specify Tooth Size When Ordering
Part No. Description RPM
MTSSBS Black Spring 3100
MTSSGS Green Spring 2550
MTSS032M Standard Spring 2200
MTSSBUS Blue Spring 1800
MTSS049 Yellow Spring 1500
Clutch Springs
Dry Moly Lubricant
Part No. Description
MT120 Dry Moly Lubricant
All prices, terms and availability subject to change without notice.
| 28
BSJ Replacement Clutch Sprockets
Part No. Description
APBSJ** Clutch sprocket - #35 chain
APBSJ219** Clutch sprocket - #219 chain
APBSJ1041 Clutch sprocket - #40/41 chain (10 tooth)
APBSJ1141 Clutch sprocket - #40/41 chain (11 tooth)
APSP1908 Replacement snap ring
APSP3005 Replacement bearing - 14 to 22 tooth
Premier BSJ Replacement Sprockets for use with Buller, Jammer, SMC, NORAM & Premier Clutches accepting interchangeable sprockets.
#219 SprocketsAvailable in 16 - 22 tooth
#35 SprocketsAvailable in 12 -20 tooth
#40/41 SprocketsAvailable in 10 - 11 tooth
Thrust Bearing
APSP3012Clutch Thrust Bearing
Spiral Snap Ring
APSP1908Replacement Snap Ring
Thrust Bearing and Spiral Snap Ring to Fit:• Noram Cheetah• GE Ultimate• Premier Stinger• Titan• Other 3/4” Shaft Clutches
Part No. Description
CC200182 V-Belt - 3/4” Bore
CC202312 V-belt - 1” Bore
Part No. Description
CC206169 12 tooth - 1” bore - #35 chain
CC206170 10 tooth - 1” bore - #40/41 chain
Comet ClutchesFor Engines Up to 8 H.P.
Max Torque V-Belt ClutchPart No. Description
MT58BELT 5/8” bore V-belt clutch
MT34BELT 3/4” bore V-belt clutch
Part No. Description
MTSS1041L Max-Lube clutch (10 tooth) #40/41
Max Torque Max-Lube SystemThis lube system supplies lubrication directly to the clutch bushing through the keyway of the engine crankshaft utilizing a special zerkbolt fitting.
Designed to address a frequent problem in fun karts, lubrication of the clutch bushing.
**Specify Tooth Size When Ordering
All prices, terms and availability subject to change without notice.
29|Part No. Description
PL316K 3/16” x 1/2” clutch key (50 per bag)
PL316K500 3/16” x 1/2” clutch key (500 per bag)
3/16” Square Clutch Keys
Bully Style Clutch Keys
Part No. Description
PL110 Clutch key (10 per bag)
PL125 Clutch key (25 per bag)
PL150 Clutch key (50 per bag)
Also Fit NORAM Cheetah Clutch & Horstman Style
Clutch Bolt KitPart No. Description
VK003 Clutch bolt kit, 3/4” long bolt
VK0031 Clutch bolt kit, 1” long bolt
Bully Style Clutch KeysPart No. Description
VK1021 Bully style clutch key
Available in bags of 10 or 25.
Crank Spacer WasherPart No. Description
AP2425 Crank spacer washer
Stepped Clutch Crank WasherPart No. Description
AP238 Stepped crank end washer
KM49028KM815 KM4902
4-Cycle Clutch Linings
Part No. Description
KM815 G/L lining (3 tab)
KM4902 SMC lining (4 tab)
KM49028 Buller/Jammer lining (8 tab)
High quality, aftermarket, replacement Clutch Disc Linings for Horstman, Buller, Jammer, & SMC 4-Cycle Disc
2-Cycle Clutch Linings
Part No. Description
KM4904 HDC5 lining (3 tab)
High quality, aftermarket replacement Clutch Disc Linings.
Clutch Keys
All prices, terms and availability subject to change without notice.
| 30 Comet 20 Series Driver
System: Model 20 SeriesType: Symmetrical (26º) Recommended H.P. Min: 8 H.P.(2-Cycle & 4-Cycle) Max: 8 H.P.Drive Belt: 3/4” Top Width Symmetrical TypeDrive Clutch Bore Sizes:3/4” and 1” (3/16- 1/4 key)Drive Clutch Engagement Range:Min: 1200 RPM Max: 3100 RPMDriven Unit Dia. 6” or 7”5/8” or 3/4” bore (3/16 key)
3/4” Bore Driver Unit
Part No. Description
CC219559 3/4” Bore Driver
3/4” Driver Parts List
No. Part No. Description1 CC202092 Bolt 3/8-24 x 1-1/2”
2 CC200841 Washer, Steel 3/8” ID
3 CC219204 Drum
4 CC200376 Hub Driver 3/4” ID 3/16” Key
5 CC200344 Shoe Driver Assembly
7 CC11188 Spring, Garter (Blue)
3/4” Driver Parts List
No. Part No. Description8 CC219572 Face, Movable w/Splined Hub
9 CC200836 Washer, Belt Spacer
10 CC200349 Bushing, Bronze
11 XXXX Belt (See Chart)
12 CC219573 Fixed Sheave 3/4” Bore
1” Bore Driver Unit
Part No. DescriptionCC219560 1” Bore Driver
1” Driver Parts List
No. Part No. Description1 CC202092 Bolt, 3/8-24 x1-1/2”
2 CC202429 Washer, Pilot
3 CC219563 Drum
4 CC203641 Sleeve, Splined (1/4” Key)
5 CC200344 Shoe Driver Assembly
6 CC219570 Face, Movable w/Splined Hub
7 CC219571 Face, Fixed (1/4” Key)
All prices, terms and availability subject to change without notice.
31|Comet 20 Series Driven
Driven Unit
Part No. DescriptionCC219459 5/8” bore - 6” dia. driven unit
CC219463 3/4” bore - 6” dia. driven unit
CC219461 5/8” bore - 7” dia. driven unit
CC219462 3/4” bore - 7” dia. driven unit
6” Driven Parts List
No. Part No. Description
1 CC219474 Face, fixed w/post 58” bore
1 CC219475 Face, fixed w/post 3/4” bore
2 CC203942 Bushing
3 CC219468 Face, movable w/cam
4 CC215698 Spring, coil (blue)
5 CC215650 Cam, fixed 20º
6 CC204714 Ring, retaining
7 CC219818 Button, insert (3 pcs)
7” Driven Parts List
No. Part No. Description
1 CC219476 Face, fixed w/post 58” bore
1 CC219477 Face, fixed w/post 3/4” bore
2 CC203942 Bushing
3 CC219469 Face, movable w/cam
4 CC215698 Spring, coil (blue)
5 CC215650 Cam, fixed 20º
6 CC204714 Ring, retaining
7 CC219818 Button, insert ( 3 pcs)
Part No. Belt No. 6” dia. 7” dia Outside
CC203578 884-70 6-15/16 - 7 No fit 27.36
CC203579 884-75 7-1/8 - 7-3/16 6-1/4 - 6-5/16 28.32
CC203580 884-80 7-9/16 - 7-5/8 6-13/16 - 6-7/8 29.28
CC203581 884-85 8-3/16 - 8-1/4 7-5/16 - 7-3/8 30.25
CC203582 884-90 8-11/16 - 8-3/4 7-3/4 - 7-13/16 31.23
CC203583 884-95 9-3/16 - 9-1/4 8-5/16 - 8-3/8 32.20
CC203584 884-100 9-5/8 - 9-11/16 8-3/4 - 8-13/16 33.18
CC203585 884-105 9-15/16 - 10 9-3/16 - 9-1/4 33.78
CC203586 884-115 10-3/4 - 10-13/16 9-13/16 - 9-7/8 35.14
CC203587 884-120 11-11/16 - 11-3/4 10-15/16 - 11 37.11
CC203588 884-130 13-1/16 - 13-1/8 12-1/8 - 12-3/16 39.77
20 Series Belts3/4” Top Width, 30° Symmetric
All prices, terms and availability subject to change without notice.
| 32 Comet 30 Series Driver
3/4” Bore Driver Unit
Part No. DescriptionCC219552 3/4” Bore Driver
3/4” Driver Parts List
No. Part No. Description1 CC202092 Bolt 3/8-24 x 1-1/2”
2 CC200841 Washer, steel 3/8” ID
3 CC219204 Drum
4 CC200376 Hub driver 3/4” ID 3/16” key
5 CC200344 Shoe driver assembly
7 CC11188 Spring, garter (blue)
3/4” Driver Parts List (continued)
No. Part No. Description8 CC219205 Face, movable w/splined hub
9 CC200836 Washer, belt spacer
10 CC200349 Bushing, bronze
11 XXXX Belt (see chart)
12 CC219278 Fixed sheave 3/4” bore
1” Bore Driver Unit
Part No. DescriptionCC219554 1” Bore Driver
1” Driver Parts List
No. Part No. Description1 CC202092 Bolt, 3/8-24 x1-1/2”
2 CC202429 Washer, pilot
3 CC219563 Drum
4 CC203641 Sleeve, splined (1/4” key)
5 CC200344 Shoe driver assembly
6 CC219561 Face, movable w/splined hub
7 CC219562 Face, fixed (1/4” key)
System: Model 30 seriesType: Asymmetrical (20 1/2º)
Recommended H.P. Min: 8 H.P.(2-Cycle & 4-Cycle) Max: 8 H.P.
Drive Belt: 3/4” Top width Asymmetrical typeDrive Clutch Bore Sizes:3/4” and 1” (3/16- 1/4 key)
Drive Clutch Engagement Range:Min: 1200 RPM Max: 3100 RPM
Driven Unit Dia. 6” or 7”5/8” or 3/4” Bore (3/16 key)
All prices, terms and availability subject to change without notice.
33|Comet 30 Series Driven Units
Driven Unit
Part No. DescriptionCC219456 5/8” bore - 6” dia. driven unit
CC219465 3/4” bore - 6” dia. driven unit
CC219457 5/8” bore - 7” dia. driven unit
CC219464 3/4” bore - 7” dia. driven unit
6” Driven Parts List
No. Part No. Description
1 CC219470 Face, Fixed w/Post 5/8” Bore
1 CC219471 Face, Fixed w/Post 3/4” Bore
2 CC203942 Bushing
3 CC219467 Face, Movable w/Cam
4 CC215699 Spring, Coil (Green)
5 CC215650 Cam, Fixed 20º
6 CC204714 Ring, Retaining
7 CC219818 Button, Insert (3 pcs)
7” Driven Parts List
No. Part No. Description
1 CC219472 Face, fixed w/post 58” bore
1 CC219473 Face, fixed w/post 3/4” bore
2 CC203942 Bushing
3 CC219467 Face, movable w/cam
4 CC215699 Spring, coil (green)
5 CC215650 Cam, fixed 20º
6 CC204714 Ring, retaining
7 CC219818 Button, insert ( 3 pcs)
Part No. Belt No. 6” dia. 7” dia Outside
CC203589 994-70 6-15/16 - 7 No fit 27.36
CC203590 994-75 7-1/8 - 7-3/16 6-1/4 - 6-5/16 28.32
CC203591 994-80 7-9/16 - 7-5/8 6-13/16 - 6-7/8 29.28
CC203592 994-85 8-3/16 - 8-1/4 7-5/16 - 7-3/8 30.25
CC203593 994-90 8-11/16 - 8-3/4 7-3/4 - 7-13/16 31.23
CC203594 994-95 9-3/16 - 9-1/4 8-5/16 - 8-3/8 32.20
CC203595 994-100 9-5/8 - 9-11/16 8-3/4 - 8-13/16 33.18
CC203596 994-105 9-15/16 - 10 9-3/16 - 9-1/4 33.78
CC203597 994-110 10-3/4 - 10-13/16 9-13/16 - 9-7/8 35.14
CC203598 994-120 11-11/16 - 11-3/4 10-15/16 - 11 37.11
CC203599 994-130 13-1/16 - 13-1/8 12-1/8 - 12-3/16 39.77
30 Series Belts3/4” Top Width, 20-1/2” Asymmetric
All prices, terms and availability subject to change without notice.
| 34
Replacement Driver Unit
Part No. DescriptionCC219552 3/4” Bore Driver
CC219554 1” Bore Driver
Replacement Driven Unit
Part No. DescriptionCC219456 5/8” Bore - 6” Driven Unit
Complete Unit
Part No. Description
CC218352 3/4” Bore - 12 tooth - #35 Chain
CC218353 3/4” Bore - 10 tooth - #40/41 Chain
CC218354 1” Bore - 12 tooth - #35 Chain
CC218355 1” bore - 10 tooth - #40/41 chain
TAV2 Parts List
No. Part No. Description4 CC219204 Drum, driver (tav2-75)
4 CC219563 Drum, driver (tav2-100)
5 CC200376 Hub, driver - 3/4” ID
5 CC203641 Hub, driver - 1” ID
6 CC200344 Driver weight assembly - complete
6A CC11188 Spring - blue
7 CC219205 Sheave, movable half with hub - 3/4”
7 CC219561 Sheave, movable halft with hub - 1”
8 CC200349 Bushing, bronze
9 CC203589 7” belt asymmetric
10 CC219278 Sheave, stationary, 2-1/2” - 3/4” ID
10 CC219562 Sheave, stationary, 2-1/2” - 1” ID
14 CC204177 Retaining ring
15 CC21560 Cam fixed
16 CC215699 Spring, green
17 CC219467 Face, movable with cam
17A CC219818 Button insert (3 pcs)
18 CC203942 Bushing
19 CC217612 Face, fixed with post, 5/8” bore
22 CC212225 5/8” dia. jackshaft
24 CC200379 Sprocket - 12 tooth - 3/8 p
24 CC202168 Sprocket - 10 tooth - 1/2 p
27 CC212227 Retaining ring
28 CC218525 Mounting bracket, bearing & spacer
31 CC218351 Plastic shroud with decals
System: TAV2 30 SeriesType: Asymmetrical (20 1/2º)Recommended H.P. Min: 8 H.P.(2-Cycle & 4-Cycle) Max: 8 H.P.Drive Belt: 3/4” top Width Asymmetrical TypeDrive Clutch Bore Sizes:3/4” and 1” (3/16- 1/4 key)Drive Clutch Engagement Range:2200 RPMDriven Unit Dia. 6”
Comet TAV2 30 Series
All prices, terms and availability subject to change without notice.
35|
40D Driven Unit Parts List
No. Part No. Description1 CC203159 Ring, retaining
2 CC205208 Washer, thrust
3 CC209115 Cam, fixed
4 CC203130 Spring, red
5 CC209128 Movable face & cam with bearing
6 CC203097 Spacer
8 CC209150 Fixed face & post - 5/8” bore
8 CC209132 Fixed face & post - 3/4” bore
9 CC206458 Button
44D Driven Unit Parts List
No. Part No. Description3 CC209621 Cam, fixed, threaded cam
4 CC203130 Spring, red
5 CC209620 Movable face, & cam with bearing
9 CC206458 Button
40 Series Belts
Part No. Belt No. 40CD Setting
44CD Setting Outside
CC203783 40-75 7-1/4” 31.95
CC203784 40-80 7-7/8” 32.9
CC203785 40-85 8-3/16” 33.87
CC203786 40-90 8-5/8” 7-5/8” 34.83
CC203787 40-95 9-3/8” 8-3/16” 35.8
CC203788 40-100 9-3/4” 8-11/16” 36.78
CC203792 40-105 10-1/4” 9-3/16” 37.75
CC203789 40-110 10-1/2” 9-5/8” 38.65
CC203790 40-120 11-1/2” 10-9/16” 40.5
CC203791 40-130 12-5/8” 11-11/16” 42.66
CC204331 40-140 13-3/4” 12-5/8” 44.53
CC213165 44-85 15-3/16” 14-7/32 47.5
CC213295 44-75 14-11/32” 13-13/32” 45.38
Comet 40 Series Torque ConverterSystem: TAV2 30 SeriesType: Asymmetrical (20 1/2°)Recommended H.P. Max: 8 H.P.(2-Cycle & 4-Cycle)Drive Belt: 3/4” Top Width Asymmetrical TypeDrive Clutch Bore Sizes: 3/4” & 1 (3/16 - 1/4 Key)Drive Clutch Engagement Range: 2200 RPMDriven Unit Dia: 6”
40/44D Driven Unit
40D Driven Unit (7-1/2” dia.)
Part No. DescriptionCC209151 5/8” driven unit
CC209133 3/4” driven unit
CC209139 7/8” driven unit
44D Driven Unit (8-1/2” dia.)
Part No. DescriptionCC209621 3/4” driven unit
40 Drive Clutch
Drive Clutch
Part No. DescriptionCC203015 1” Bore Driver - Complete
Drive Clutch Parts List
No. Part No. Description1 CC203021 Cover & drive plate
2 CC203648 Cam, roller, standard
3 CC203044 Clip, spring
4 CC203043 Spring, extension - yellow
5 CC203022 Face, movable & hub
6 CC203031 Bushing, guide
7 CC203039 Spring, compression
8 CC203023 Face, fixed & post - 1” bore
All prices, terms and availability subject to change without notice.
| 36
Part No. Description
KM125 1-1/4” Sprocket Hub
KM125L 1-1/4” Ultralight Sprocket Hub
KM125F 1-1/4” Floating Sprocket Hub
Lightweight aluminum sprocket hubs for 1-1/4” axles. Available in standard, ultralight or floating versions.
Black Anodized Sprocket Hubs
Sprocket Hub Bolt Kit
Part No. Description
VK325 Sprocket Hub Bolt Kit
Part No. Description
VK147 Chain Cover Bolt Kit (SAE)
VK149 Chain Cover Bolt Kit (Metric)
Chain Cover Bolt Kit
Sprocket Holder
Part No. Description
KMSH12 12 Sprocket Holder
KMSH24 24 Sprocket Holder
Hang it on the wall, sit it on the workbench,carry it through the pits,no matter where, Gears will stay in place.
Hardware Included
Part No. Description
PPH1 1” Standard Sprocket Hub
PPH1B 1” Standard Sprocket Hub (Black)
PPH114 1-1/4” Standard Sprocket Hub
PPH114B 1-1/4” Standard Sproctet Hub (Black)
Pit Parts Sprocket Hubs
Standard sprocket hubs available in 1” and 1-1/4”
Pit PartsAluminum Sprocket Guard
Part No. Description
PP8 8” Sprocket Guard (59 - 65)
PP9 9” Sprocket Guard (66 - 71)
Pit Parts Anodized Sprockets are made from a high quality alloy compound that guarantees durability. The precision cut tooth design reduces friction at high speeds resulting in smooth chain run and high output.
Pit Parts Anodized Sprockets
#219 Chain #219 Chain#35 Chain
Part No. Description
PP** #35 Chain Split Sprocket
**Specify tooth size when orderingAvailable in 53 - 78 Tooth
Part No. Description
PP219** #219 Chain split sprockets
**Specify tooth size when orderingAvailable in 65 - 93 Tooth
Part No. Description
PP219B** #219 Chain Solid sprockets
**Specify tooth size when orderingAvailable in 65 - 93 Tooth
All prices, terms and availability subject to change without notice.
37|
Part No. Description
KM1070 9” Aluminum 4 pc Sprocket
Aluminum 4 pc. Sprocket Guard
IncludesHardware
AE1810AE1809
Azusa Chain Cover
Part No. Description
AE1809 Briggs Flat Head Chain Cover
AE1810 Universal Chain Cover
Plastic Sprocket Guard
Part No. Description
KM1081 9” Plastic Sprocket Guard
9” 2 piece plastic sprocket guard. Works with sprockets up to 71 tooth
Azusa 1” Sprocket Hubs
Part No. Description
AE1859 1” Mini Sprocket Hub
AE1872 1” Aluminum Sprocket Hub
KM1073 & KM1074 AE2152 & AE2158
Part No. Description
KM1073 60 Tooth Sprocket (1-3/8” Pilot Hole)
KM1074 72 Tooth Sprocket (1-3/8” Pilot Hole)
AE2152 60 Tooth Sprocket (4-9/16” Pilot Hole)
AE2158 72 Tooth Sprocket (4-9/16” Pilot Hole)
#35 Chain Economy Sprockets
High quality, 1 piece, zinc plate steel sprockets
Riveted Drum & Sprocket Assembly
Part No. Description
AE2217 Drum & Sprocket - 60 Tooth
AE2218 Drum & Sprocket - 72 Tooth
Aluminum split sprockets with 5-1/4” bolt circle.
#40 Chain Split Sprockets
Part No. Description
AET** #40 Split Sprocket
** Specify tooth size when orderingAvailable in 48 - 66 tooth
All prices, terms and availability subject to change without notice.
| 38
Part No. Description
KM222 Deluxe Chain Cover
Deluxe Aluminum Chain CoverClone Chain Cover
Part No. Description
KM224 5” Clone Chain Cover
KM224T 7” Clone Chain Cover
Steel Chain Cover
Part No. Description
GPG1227 Chain Cover
Fits Briggs, Honda,Clone & Tecumseh Engines
Clutch Cover
Part No. Description
KM223 Clutch Cover
KM223D Replacement Dzus Button
Economy #35 ChainPart No. Description
ET35X3FT 3 ft. Roll (#35 Chain)
ET35X4FT 4 ft. Roll (#35 Chain)
ET35X10FT 10 ft. Roll (#35 Chain)
ET35X50FT 50 ft. Roll (#35 Chain)
ET35CL Master Link (#35 Chain)
Economy #41 Chain
Part No. Description
ET41X4FT 4 ft. Roll (#41 Chain)
SC41X10FT 10 ft. Roll (#41 Chain)
SC41X25FT 25 ft. Roll (#41 Chain)
SC41CL #41 Master Link
SC41OS #41 Offset Link
Part No. Description
SC40X10FT 10 ft. Roll (#40 Chain)
SC40X25FT 25 ft. Roll (#40 Chain)
SC40CL #40 Master Link
SC40OS #40 Offset Link
Economy #40 Chain
Sold Individually
Klotz chain lubes are formulated to provide the maximum level of lubrication and wear protection.
Part No. Description
KL500 Hi-performance Chain Case Lube - 12 oz.
KL605 Hi-perormance Chain Lube - 15.5 oz Aerosol
KL611 KLR Chain Lube - 16 oz. Aerosol
Klotz Chain Lube
Tri-Flow Superior Lubricant provides twice the lubricating power of most competitive brands. It’s light viscosity allows for deep penetration into hard to reach moving parts.
Tri-Flow Superior Lubricant
Sold Individually
Part No. Description
TF6 Superior lubricant - 6 oz
TF12 Superior lubricant - 12 oz
To order 1 case of: TF6 = Order 12 Cans TF12 = Order 6 Cans
All prices, terms and availability subject to change without notice.
39|
Daido #219 Racing Kart Chain
Part No. Description
DA219114 Daido #219 Chain (114 Links)
Part No. Links Length
DAEK219114 114 Standard
DAEK21910FT 391 Standard 10 ft.
DAEK219114S 114 Silver Pro
DAEK21910FTS 391 Silver Pro 10 ft.
Part No. Description
DA40SH10FT EK #40 Chain (10 Ft. Roll)
DA40SHCL Master Link
Part No. Links Length
DA35T106 106 40”
DA35T120 120 45”
DA35T10FT 320 10 ft.
DA35T100FT 3200 100 ft.
DA35TCL Master Link
EK Standard
Part No. Links Length
DA35S106 106 40”
DA35S120 120 45”
DA35S10FT 320 10 ft.
DA35S100FT 3200 100 ft.
DA35SCL Master Link
EK Silver Pro
Part No. Links Length
DA35HT106 106 40”
DA35HT120 120 45”
DA35HT10FT 320 10 ft.
DA35HT100FT 3200 100 ft.
DA35HTCL Master Link
EK HT (High Tensile)
#35 Chain
EK #219 Kart Chain EK #40 Racing Chain
EK Chain combines the qualities of high tensile strength, low wear, impact resistance, anti-kinking best kart racing chain available.
Chain Tools
Part No. Description
KMCTM #35 Chain Tool
KM219CT #219 Chain Tool
KM428CT #428 Chain Tool
Steel chain tools for #35, #219 & #428 Chain. Enables fast and easy reomval & installation of pins.
#428 Chain tool will work on #40/#41 Chain
Replacement Pins
Part No. Description
KMPPM #35 Chain Tool
KMPP219 #219 Chain Tool
KM428PP #428 Chain Tool
All prices, terms and availability subject to change without notice.
| 40DWT AlumiLite Kart Wheels are the Best Selling, Highest Performing and Greatest Value Spun Aluminum Kart Wheels Available.
DWT AlumiLite Kart Wheels
Part No. Width Inside Outside
DW70521 4.5 2.5 2
DW70514 5 2.5 2.5
DW70517 5 2 3
DW70510 5.125 1.625 3.5
DW70518 5.5 2 3.5
DW70519 5.5 3 2.5
DW70513 6 2.5 3.5
DW70512 6.5 2.5 4
DW70528 6.5 3.25 3.25
DW70522 7.25 2.5 4.75
DW70524 7.5 3.5 4
DW70511 7.75 2.5 5.25
DW70530 8.25 3.5 4.75
5” WheelsUS Pattern - Polished Part No. Width Inside Outside
DW70604 5 2.5 2.5
DW70612 5.5 2.5 3
DW70605 6 2.5 3.5
DW70630 6 4 2
DW70603 6.5 2.5 4
DW70610 7.25 2.5 4.75
DW70602 7.75 2.5 5.25
DW70608 8 4 4
DW70625B 8.25 3 5.25
DW70624B 8.5 3.5 5
DW70640B 8.5 4 4.5
DW70623B 8.75 3.5 5.25
DW70621B 9.25 4 5.25
DW70638B 9.5 4.75 4.75
DW70629B 10 4 6
6” WheelsUS Pattern - Polished
Part No. Width Inside Outside Color
DW72527** 3.25 1.625 1.625 Polished
DW72510 5.125 1.625 3.5 Polished
DW72511 7.75 2.5 5.25 Polished
DW72512 6.5 2.5 4 Polished
DW72517** 4 2 2 Polished
DW725279** 3.25 1.625 1.625 Black
DW725139** 4.625 1.625 3 Black
DW725109 5.125 1.625 3.5 Black
DW725119 7.75 2.5 5.25 Black
DW725129 6.5 2.5 4 Black
DW725179** 4 2 2 Black
DW725379** 4.5 2.5 2 Black
DW735039 5 (CRG)* 2 3 Black
5” Wheels3/58 Metric Pattern
Part No. Size Description Color
DW72901 5 x 5 5/8” bearing Polished
DW72801 5 x 5 17 mm bearing Polished
DW728019 5 x 5 17 mm bearing Black
Direct Spindle Mount Wheels
Valve Stems
Part No. Description
IP412 Short Valve Stem -1”
KMVC Valve Caps (25 pack)*CRG Wheel is 3/67 bolt pattern and is Special Order Item**Special Order Item Only
All prices, terms and availability subject to change without notice.
41|
Wheel Nuts
Part No. Description
AP1428 1/4-28 Wheel Nuts
AP51624 5/16-24 Wheel Nuts
AP142812 1/4-28 flange nut - 1/2” head
Sold In Packs of 25 or 100
Wheel Weights
Part No. DescriptionAE1820 Stick-on Wheel Weights
Vented Low Volume
Features:• Stainless Steel Bead Screws• High Quality Valve Stems, Exceeds CIK Standards• New Magnesium Alloy with High Impact Strength• Designed for Easier Tire Mounting• FIA/CIK Required Lock Nuts and Instructions Included
DWT M-Series Kart Wheels
DWT M-Series Race Kart Wheels are in a class of their own. With Proprietary Magnesium Design Technology blended with relentless testing and feedback from the world’s top factory race teams, the M-Series and its record-setting sucess have redefined Magnesium Wheel Technology.
Part No. Description Type Backspace
DW5130LV 5 x 130 mm (5.1”) LV 43 mm
DW5130V 5 x 130 mm (5.1”) Vented 43 mm
DW5132V 5 x 132 mm (5.2”) Vented 44 mm
Front Wheels - 3/58 MetricPart No. Description Type Backspace
DW5180LV 5 x 180 mm (7.1”) LV 58 mm
DW5210V 5 x 210 mm (8.25”) Vented 58 mm
DW5212LV 5 x 212 mm (8.35”) LV 59 mm
Rear Wheels - 3/58 Metric
Part No. Description Type Backspace
SMGB13058LV 5 x 130 mm (5.1”) 3/58 LV 43 mm
SMGB13067LV 5 x 130 mm (5.1”) 3/67 CRG LV 43 mm
Features:• Stainless Stee Bead Screws• High Quality Valve Stems, Exceeds CIK Standards• Magnesium Alloy with Higher Impact Strength
Part No. Description Type Backspace
SMGB18058LV 5 x 180 mm (7.1”) LV 58 mm
SMGB21258LV 5 x 212 mm (8.35”) LV 59 mm
Swift Magnesium Kart WheelsThe LV (Low Volume) simply put, is designed to reduce the gas volume that inflates the tire, which in turn allows lower initial tire pressure, promoting lower final tire temperatures. The LV wheels have thinner walls of a larger diameter, improving heat transfer rates and giving more cooling surface area. This extra cooling capacity helps stabilize and regulate temperature and pressure rise, for better and longer tire performance.
Front Wheels - Metric
Rear Wheels - 3/58 Metric
Part No. Description
DW75246 CIK Nut & Washer Kit (12 pcs.)
DW75291 5 mm Bead Lock Kit (12 pcs.)
DW75026 5 mm Bead Lock Kit (3 pcs.)
DW75030 Replacement O-rings (12 pcs)
Bead Locks & O-Rings
All prices, terms and availability subject to change without notice.
| 42
Wheel Bolt KitPart No. Description
VK324 1/4” wheel bolt kit (3 pcs)
VK393 1/4” self start wheel bolt kit (12 pcs)
VK405 5/16” self start wheel bolt kit (12 pcs)
AP516BK 5/16” wheel bolt kit (3 pcs)
Part No. Description
HRDWM6S M6 x 1.0 - 6 mm tall Nylock nut
HRDWM6T M6 x 1.0 - 8 mm tall Nylock nut
HRDWM6F M6 x 1.0 - 9 mm tall Nylock flange nut
HRDWM6W Flat washer 6.25 mm id x 12 mm od
HRDWM8S M8 x 1.25 - 7.75 mm tall Nylock nut
HRDWM8T M6 x 1.25 - 9.25 mm tall Nylock nut
HRDWM8F M6 x 1.25 - 10.75 mm tall Nylock flange nut
HRDWM8W Flat washer 8.4 mm id x 15 mm od
Metric Nuts & Washers
Yard Kart Tires
Part No. Description
ET4104K 410/350 - 4” Saw Tooth Tire
ET4105K 410/350 - 5” Knobby Tire
Azusalite Wheels
Part No. Description
AE1057 5” front wheel (with bearings)
AE1067 5” rear wheel (3/4” to 1” step)
Azusa Aluminum Wheels
Part No. Description
AE1125 6” front wheel (with bearings)
AE1117 6” rear wheel (3/4” to 1” step)
AE1144 5” front wheel (with bearings)
AE1147 5” rear wheel (3/4” to 1” step)
Inner Tubes
Part No. Description
CT7107 410/350 - 4” Tube
CT7112 410/350 - 5” Tube
CT7117 410/350 - 6” Tube
Part No. Width Inside Outside Dia.
DW00530 8 3 5 8
DW00531 6 3 3 8
4/4 DWT ATV WheelsDWT ATV Wheels
Valve Stems
Part No. Description
IP412 Short Valve Stem -1”
KMVC Valve Caps (25
Part No. Description
PP112 5” tire mounting/dismounting tool
PP113 6” tire mounting/dismounting tool
PP114 Replacement pin
PP115 Replacement disc - 5”
PP116 Replacement disc - 6”
Tire Changing Tool for 5” & 6”Tire Changing Tool
All prices, terms and availability subject to change without notice.
43|
Part No. Description
LA50553 Tire Durometer
Longacre Basic Durometer
Features:• Reads from 0-100 points• Comes with Red Case
Features:• 2” glow-in-the-dark face for high accuracy & easy readability.• Internal gauge damper for more accurate readings.• Flexible 14” hose with angle chuck - includes ball chuck
Part No. Description
LA15 0 - 15 lbs.
LA30 0 - 30 lbs.
Longacre Basic Tire GaugeDoes Not Hold Air Pressure
Features:• 2” face with large numbers• Reads to .2 psi with .8% accuracy• Air pressure release button• Hi-Flex 14” hose with angle chuck - includes ball chuck• Digital read out
Part No. Description
LA53036 0 - 100 lbs
Longacre Basic Digital Tire Gauge
Feature:• 2-1/2” glow-in-the-dark face for high accuracy & easy readability• High flow release button and swivel chuck• Holds pressure until released• Internal gauge damper for more accurate readings• Flexible 17” hose
Part No. Description
LA52033 0 - 15 lbs.
LA52023 0 - 30 lbs.
Longacre Deluxe Tire Gauges
Part No. Description
RLV0028 RLV Bead Breaker
PP802 Pit Parts Bead Breaker
Tire Bead Breaker for 5” & 6” Wheels.Bead Breakers
RLV0028PP802
All prices, terms and availability subject to change without notice.
| 44 SFI Certified Chest Protectors
Valhalla Armadillo Rib VestRib Vest with Chest Protector
The versatile design of the Armadillo Rib Vest makes a good fit for drivers of all different shapes and sizes. It not only gives the driver chest protection, but covers the complete torso as well.
Features Include:• SFI Certified Vest Option• Removable Shoulder Pads• Complete Torso Coverage• Quick Release Shoulder Buckles• Padded Back• Adjustable Side
Meet 20.1 SFI Certification Requirements for drivers ages 5 - 12.
Part No. Description
VA1 Kid Kart (SFI) - 22” - 27” chest size
VA2 Junior (SFI) - 26” - 31” chest size
VA3 Junior II (SFI) - 30” - 35” chest size
VA5SFI Medium (SFI) - 34-1/2” - 39” chest size
Part No. Description
VA4 Small - 30” - 35” chest size
VA5 Medium - 34-1/2” - 39” chest size
VA6 Large - 38-1/2” - 43” chest size
VA7 Extra Large - 42-1/2” - 47” chest size
For Drivers ages 12 and over looking for the same protection yet don’t require the SFI Certification.
Valhalla Gen4 Chest ProtectorSFI Certified
The newly designed SFI Certified Chest Protector helps absorb impact to the chest area. Young drivers in go karts, dirt bikes, motorcross and BMX benefit from the protection as well as youth in other sports.
The following can be used as a guideline:Average Chest Size Range of 5 - 8 year olds = 22” - 26”Average Chest Size Range of 8 - 12 year olds = 26” - 30”
Part No. Description
VAG4VR1 5 - 8 Year Old
VAG4VR2 8 - 12 Year Old
Valhalla Gen4 Chest Protector VestSFI Certified
The most versatile chest protector available! The Gen4 Armadillo is designed to help absorb impact to the chest, rib and back area of young drivers. It is beneficial to drivers in motorsports such as karting, dirt bikes, motocross.
Features Include:• SFI Certified• Complete Torso Coverage• Adjustable Side Panels• Quick Release Buckles
Sizing Instructions: Measure driver’s chest and waist, use the larger of the 2 to determine vest size.
Part No. Description
VAG41 22” - 27” (Kid Kart)
VAG42 26” - 31” (Junior)
VAG43 30 “ - 35” (Junior II)
VAG45 34” - 39” (Medium)
Part No. Descrption
VAGCON1 22” - 27” (Kid Kart)
VAGCON2 26” - 31” (Junior)
VAGCON3 30” - 35” (Junior II)
VAGCON5 34” - 399” (Medium)
Chest Protectorto
Vest Conversion KitConverts to the Gen4 Chest Protector to a Chest Protector Vest
All prices, terms and availability subject to change without notice.
45|
Part No. DescriptionVA360K Youth - 10” to 13” Neck Size
VA360A Adult - 13” to 16” Neck Size
Team Valhalla 360 Plus DeviceThe 360 Plus Device is a different approach to filling the neck collar requirement. The molded, glass filled nylon core piece and firm chin foam parts provide a stable platform for helping control the movement of the driver’s head when needed.
• Limits Front and Rear Hyper-Flexion• Reduces Extreme Lateral Motion• Unrestricted Head Rotation• Dispersed Compression Load• Lightweight, Only 1.75 lbs• WKA Approved
Part No. Description
EV209 EVS R4 Adult Neck Support - Black
EV210 EVS R4 Youth Neck Support - Black
Youth - under 105 lbs, under 5’3”Adult - over 105 lbs, over 5’3”
• Hard molded upper surface disperses energy to PU core• Hi-tensile closed cell PU core absorbs impact energy• Bio-foam liner provides extra impact absorption• Rapid lock closure system for easy front entry• Adjustable rear strut for customized fit
EVS R4 Race CollarThe R4 is a lightweight, form fitting race collar offering protection against neck and collarbone injuries. The low profile design makes it a comfortable, yet protective piece of gear you can wear on the track.
The R2 Collar is a lightweight, cost effective race collar that protects against neck and collarbone injuries
Youth - under 105 lbs, under 5’3”Adult - over 105 lbs, over 5’3”
Part No. Description
EVR218A EVSR2 - Adult Neck Support
EVR218Y EVSR2 - Youth Neck Support
EVS R2 Race Collar
• Low Profile Design• EasyFront Entry System• Removable, Washable Liner
Valhalla Aramadillo Rib Protector
For those looking for the quality and protection of an Armadillo Rib Vest but without the bulk of the chest protector.
• Side panels pad rib and kidney area• Padded back panel relieves pressure and rubbing from seat back• Quick adjustments to fit with easy adjusting webbing hardware on shoulders.
Part No. Description
VA10 Small
VA11 Medium
VA12 Large
VA13 X-Large
All prices, terms and availability subject to change without notice.
| 46
Part No. Description
RW100 Youth 360º helmet support - Black
RWNCB Adult 360º helmet support - Black
Kart Racewear 360º Helmet Support
Kart Racewear Wedge Helmet Support
Part No. Description
RW200 Youth wedge helmet support - Black
RW202 Youth wedge helmet support - Blue
RW500 Adult wedge helmet support - Black
RW501 Adult wedge helmet support - Red
RW502 Adult wedge helmet support - Blue
Kart Racewear Karting Jacket Size Charts
Youth Size Chart
Size Chest Measurement
Small 26” - 28”
Medium 28” - 30”
Large 30” - 32”
X-Large 32” - 34”
Adult Size Chart
Size Chest Measurement
Small 34” - 36”
Medium 38” - 40”
Large 42” - 44”
X-Large 46” - 48”
XX-Large 50”- 52”
Kart Racewear Karting JacketsKart Racewear Premium Karting Jackets incorporate performance features with abrasion resistant construction. An excellent alternative for those not wanting a full suit.
**Specify Size When Ordering
Part No. Description
RW700 Youth Premium Kart Jacket
RW701 Adult Premium Kart Jacket
700 Series Jacket
• Suede Heat Resistant Elbow/Forearm Patch• Durable abrasion resistant polyester construction• Cool, lightweight mesh interior• Pre-curved arms• Front pockets• Black with Silver reflective trim• Available in XXX-L Size
Premium Race Jacket Features:
Available in:Adult S - XXXLYouth XS - XL
**Specify size when ordering
Part No. Description
RW600 Youth Kart Jacket
RW601 Adult Kart Jacket
600 Series Jacket
• Heat Resistant Elbow/Forearm Patch• Durable nylon construction• Mesh ventilation panels• Pre-curved arms• Action shoulder gussets• Front pockets• Black with Red
600 Series Race Jacket Features:
Available in:Adult S - XXLYouth XS - XL
All prices, terms and availability subject to change without notice.
47|
Racewear Helmet Support Strap & D-Ring
Part No. Description
KM1004 Racewear Helmet Support Strap
IR011 Helmet D-Ring
Racewear Kart Covers are made from a heavyweight polyester material with a waterproof backing.
Kart Racewear Kart Covers
Part No. Description
RWSC Sprint Kart Cover
RWEC Enduro Kart Cover
RWCC Champ Kart Cover
RWBKC Junior/Baby Kart Cover
Sprint Kart Covers are designed to fit most current karts with full body work.
**Specify size when ordering
Adult Size Chart
Size Inches
Extra Small 6 - 7-1/2
Small 7 - 8-1/2
Medium 8 - 9-1/2
Large 9 - 10-1/2
Extra Large 10 - 11-1/2
Youth Size Chart
Size Inches
Small 5 - 6
Medium 5 - 6-1/2
Large 6 - 7
Kart Racewear KartingGlove Size Charts
Glove Sizing - Measure largest part of hand over knuckles while making a fist, excluding thumb
The new Kart Racewear 200 Series glove features a longer cuff with Velcro closing strap and a padded palm that is just the right thickness.
Kart Racewear 200 Series Gloves
Part No. DescriptionLE200* Adult 200 series glove - black/silver
LE200C* Youth 200 series glove - black/silver
**Specify size when ordering
Available in: Adult: XS - XL Youth: XS - L
Part No. Description
LE500* Adult 500 series glove - black
LE500C* Youth 500 series glove - black
Our 500 Series gloves feature leather palms, spandex between the fingers and a mesh backing with a soft knuckle guard.
Kart Racewear 500 Series Gloves
Available in: Adult: XS - XL Youth: XS - L
All prices, terms and availability subject to change without notice.
| 48
Impact Helmet Support Strap & D-Ring
Part No. Description
IR1004 Helmet Support Strap
IR011 Helmet D-Ring
High-density compression foam increases its resistance as pres-sure on it increases, which helps control head and neck roll. Foam can be shaved for a perfect custom fit tailored specifically to you and your helmet. Manufacturer certified to comply with the SFI Foundation’s 3.3 Specification.
Part No. Description
IR74510 Helmet Support - Black
Impact Helmet Support
• Individual Shoulder Harness• Pull-Up Lap Belt Adjustment• Single 5-Point Sub Belt• Includes Bolt In Hardware• SFI Certified
Part No. Description
IR661 2” QM/Jr. Drag Belts (Latch & Link)
IR661C 2” QM/Jr. Drag Belts (Cam Lock)
IR111 3” Latch & Link Belts
Impact Latch & Link or Cam Lock Belts
3-compartment gear bag is designed to hold your helmet, suit, gloves, shoes and accessories. Constructed of heavy-duty nylon with webbed handle and a removable shoulder strap. Measures: 27” x 12” x 11”
Part No. Description
IR72000 Gear bag
Impact Gear Bag
Part No. Description
IR75910 Arm Restraints
Padded arm bands with webbed leashes & two adjustments. Meets SFI.
Impact Arm Restraints
All prices, terms and availability subject to change without notice.
49|
Zamp ZR-50 Race GlovesSFI 3.3/5
The Zamp ZR-50 Race Glove is a lightweight, 2-layer glove with a high quality reverse seam.
ZR-50 Features:• Reverse Seam Design for Ultimate Feel• Elastic Band at Wrist• Silicone Pads in Palm and Fingers• Leather Palm• Fire Retardant Interior
Part No. Description
ZHZR50RGB* Black
ZHZR50RGBL* Blue
ZHZR50RGG* Grey
ZHZR50RGR* Red
**Specify Size When Ordering
Available SizesBlack & Grey: XS - 3XLBlue & Red - S - 2XL
Zamp ZR-50 Race ShoesSFI 3.3/5 Approved
Part No. Description
ZHZR50RGSB* Black
ZHZR50RGSL* Blue
ZHZR50RSG* Gray
ZHZR50RSR* Red
ZHZR50RSNO* Neon Orange
ZHZR50RSNG* Neon Green
The Zamp ZR-50 Race Shoes feature a high-quality, multi-layer construction with an elastic enclosure and thin rubber sole for ultimate pedal feel, all in a super lightweight shoe.
ZR-50 Shoe Features:• Super lightweight• Flexible Construction• Velcro ankle strap• Tensioner on laces to prevent shoes coming untied mid race• Thin rubber sole for ultimate pedal feel• Plush fire retardant NMX interior• SFI 3.3/5 Approved
Available SizesBlack Only Sizes 1 - 18Blue, Red, Orange, Green & Gray SIzes 8 - 13
Zamp ZR-10 Single Layer Youth Race SuitSFI 3.2A/1
The Zamp ZR-10 Youth Racing Suit is a Lightweight, Stylish Suit at an Affordable Price. The Best Value on the Market Today, this SFI 3.2A/1 suit is made of FR Cotton and available in a broad range of sizes.
Features Include:• Single Layer, 100% FR Cotton Construction• Box Quilt Stitching• Pockets on Each Leg and An Adjustable Belt• Aramid Cuffs Around Ankles and Wrists for Comfort Fit• Stylish Ankle Protection in Boot Cuff Legs• Available in Black and Gray
Available in:Y-SmallY-MediumY-LargeY-XLarge
Part No. Description
ZHZR10B* ZR-10 Youth Suit - Black
ZHZR10W* ZR-10 Youth Suit - Gray
**Specify Size When Ordering
**Specify Size When Ordering
All prices, terms and availability subject to change without notice.
| 50Size Small Medium Large X-Large
Sleeve Length (Include Cuff) 19.0 20.5 22.0 24.0
Chest (1” Below Armhole) 32.0 34.0 36.0 38.0
Shoulder Width 12.7 13.4 14.2 15.0
Waist 26.5 28.0 29.5 32.1
Center Back Length 17.3 17.5 17.7 17.9
InSeam 22.0 24.0 26.0 28.0
Zipper Length 20.5 21.0 21.5 22.0
Zamp Youth Race Suit Sizing Chart
Wrap tape measure snuggly around hand behind knuckles and across palm, do not include thumb. Measure both hands. Use larger measurement to determine glove size.
Zamp Glove Sizing
Size Hand Size(Inches)
Hand Size(Centimeters)
XS 7.5” 19
S 8.25” 21
M 8.5” 21.5
L 8.9” 22.5
XL 9.25” 23.5
2XL 10” 25.5
3XL 11” 28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
US Men 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
US Women 3 4 5 6 7 8 9 10 11 12 13
Euro Men 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51
Euro Women 36 37 38 39 40 41 42 43 44 45 46
Zamp Shoe Sizing Chart
X-Small Small Medium Large X-Large 2-XL 3-XL
CM 54 cm 56 cm 58 cm 60 cm 62 cm 63 cm 64 cm
Inches 21.25” 22” 22.83” 23.62” 24.4” 24.8” 25.20”
Hat Size 6-3/4 7 7-1/4 7-1/2 7-3/4 7-7/8 8
Zamp Helmet Sizing Chart - Adult
52 54 56 57CM 52 cm 54 cm 56 cm 57 cm
Inches 20.5” 21.25” 22” 22.44”
Hat Size 6-1/2 6-3/4 7 7-1/8
Zamp Helmet Sizing Chart - Youth
All prices, terms and availability subject to change without notice.
51|
ZHFS9RBRed/Black
ZHFS9OB Neon Orange/Black
Neon Green/BlackZHFS9GB
WhiteZHFS9W
Gloss BlackZHFS9B
Zamp FS-9 HelmetsSnell M-2020D
ReplacementLiner & Cheek Pads
Part No. Description
ZHFS8CL* Crown Liner
ZHFS8CP* Cheek Pads
ZHFS8XXS XXS Cheek & Crown Kit
Zamp FS-9 Adult HelmetsPart No. Description
ZHFS9B* Gloss Black
ZHFS9FB* Flat Black
ZHFS9W* White
ZHFS9BS* Blue/Silver Graphic
ZHFS9GB* Neon Green/Black Graphic
ZHFS9OB* Neon Orange/Black Graphic
ZHFS9RB* Red/Black Graphic
ZHFS9SB* Silver/Black Graphic
** Specifly Size XS - XXL
Silver/BlackZHFS9SB
ZHFS9BSBlue/Silver
Flat BlackZHFS9FB
Face Shields For FS-8 / FS-9
Part No. Description
ZHFS8S* Z-19 Replacement Shield
ZHFS8PK Zamp FS8/FS9 pivot kit
• C = Clear• S = Smoke• DS = Dark Smoke• I = Iridium• M = Mirror
The all new Zamp FS-9 Helmet consists of a lightweight fiberglass shell meeting the Snell M2020D standard. It offers superior impact absorption, a characteristic seen only on helmets twice the cost.
Features Include:• Composite Fiberglass Lightweight Shell• Adjustable Chin & Scalp Vents with Rear Exhausts• Removable/Washable moisture absorbent fabric interior• Interchangable liners for custom fit• Optically correct Z-19 Shield with Lock Button in Closed Position• Snell M-2020D and DOT
**Specify Size When Ordering**Specify Shield Color When Ordering
All prices, terms and availability subject to change without notice.
| 52 Zamp RZ-70E “Switch Helmet”FIA 8859-2015/Snell SA-2015 Approved
Zamp RZ-45DSnell SA-2015
The Zamp RZ-45D packs awesome features in a Super LIghtweight Carbon Mix Shell.
Features Include:• Super Lightweight Carbon Mix Shell• Improved Stability with Optimized Aerodynamics• Large Front Lower Spoiler• Optional Add On Rear Wing• Low Profile Air Attachment Included, Easy Install with 4 Screws• Top Air System - Run Natural Air, Forced Air or Air Plugs• Minimal Forward Venting and Elastic Chin Curtain Keep Dirt Out• Single Flow to Shield and Side Chin Bar for Venting• Breath Deflector to Reduce Shield Fogging• Fire Retardant, Removable/Washable Interior with EPS Chin Bar Foam• Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at 12.125 inch Center Posts• Hydration Hole/Plug in Chin Bar for Easy Setup, Remove Plug to Install Hydration Kit.• Ear Muffs & Pads Provide Quieter Environment for Driver• Easy Integration of Communication Equipment with Cheek EPS and Comfort Liner• M6 Inserts for Head & Neck Restraint
Part No. Description
ZHRZ45D* Zamp RZ-45D Helmet
**Specify Size When OrderingAvailable in Size Small to 2XL
Zamp’s Revolutionary new “SWITCH” Helmet has a unique system allowing you to easily configure your helmet for a variety of racer setups with just a cheek pad and 3 screws. It also contains the new, Dual Density Air Integration Relief System. Full 360-degree air channeling provides the ulitmate air flow; cool air enters the helmet, warm air leaves the helmet.
Features Include:• Lightweight Composite Aramid Mix Shell• Z-Design in Shell circulates air throughout helmet via large
internal channels• Easy mounting of Communications/Microphone or Drink
Tube with Channels in Chin Bar EPS.• ZF-20/Z-20 Series Clear Shield using Banana Style Tear
Offs on 12.25 Inch Posts.• M6 Inserts for Head and Neck Restraint• Triangle Caps: Aero for Open Wheel or Communication Cap• Available in Solid Colors, White & Black or Graphics,
Orange/Yellow, Blue/Light Blue or Gray/Light Gray
Part No. Description
ZHRZ70EW RZ-70E Gloss White
ZHRZ70EB RZ-70E Gloss Black
ZHRZ70EOY RZ-70E Orange/Yellow Graphic
ZHRZ70EBLB RZ-70E Blue/Light Blue Graphic
ZHRZ70EGLG RZ-70E Gray/Light Gray Graphic
**Specify Size When OrderingAvailable in Sizes XS - 2XL
All prices, terms and availability subject to change without notice.
53|
RZ-44C Features include:
• Super Lighweight Carbon Mix Shell• Chin Bar with Aero Lips In Aerodynamic Shell• Optional Rear Top Spoiler and Front Top Chin Bar Spoiler Included In Box• Tri-Tech Air System - run Natural Air, Forced Air or Air Plugs• Three Adjustable Inlets on Top and Both Sides of Chin Bar• Plush Fire Retardant Removable/Washable Interior with EPS Chin Bar Foam• Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at 12.125 inch Center Posts• Hydration Hole/Plug in Chin Bar for Easy Setup, Remove Plug to Install Hydration Kit.• Ear Muffs & Pads Provide Quieter Environment for Driver• M6 Inserts for Neck Restraints
RZ-42 Features include:
• Super Lightweight Kevlar Mix Shell• Chin Bar with Aero Lips In Aerodynamic Shell• Optional Rear Top Spoiler and Front Top Chin Bar Spoiler Included In Box• Tri-Tech Air System - run Natural Air, Forced Air or Air Plugs• Three Adjustable Inlets on Top and Both Sides of Chin Bar• Plush Fire Retardant Removable/Washable Interior with EPS Chin Bar Foam• Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at 12.125 inch Center Posts• Hydration Hole/Plug in Chin Bar for Easy Setup, Remove Plug to Install Hydration Kit.• Ear Muffs & Pads Provide Quieter Environment for Driver• M6 Inserts for Neck Restraints
ZHRZ44CEHCarbon Honeycomb
ZHRZ44CEOOrange Honeycomb
ZHRZ44CCarbon
Zamp RZ-44C HelmetSnell SA-2015
ZHRZ44CE - FIA8859
Part No. Description
ZHRZ44CEH* RZ44CE - Carbon Honeycomb SA2015 & FIA 8859
ZHRZ44CEO* RZ44CE - Orange Honeycomb SA2015 & FIA 8859
ZHRZ44C* RZ44C - Carbon SA2015
**Specify Size When Ordering
Available In:Carbon XS - XXLCarbon & Orange Honeycomb S - XL
Zamp RZ-42 HelmetSnell SA-2015
ZHRZ42GSGreen/Silver
ZHRZ42BOBlue/Orange
ZHRZ42BMatte Black
ZHRZ42WWhite
Part No. Description
ZHRZ42B* RZ42 - Matte Black
ZHRZ42W* RZ42 - White
ZHRZ42BO* RZ42 - Blue Orange/Graphic
ZHRZ42GS* RZ42 - Green/Silver Graphic
**Specify Size When Ordering
Available in XS - XXL
All prices, terms and availability subject to change without notice.
| 54 Zamp RZ-40 HelmetSnell SA-2015
SPECIAL ORDER ONLY
RZ-40 Features Include:• Traditional Style Lighweight Kevlar Mix Shell• Tri-Tech Air System - run Natural Air, Forced Air or Air Plugs• Plush Fire Retardant Removable/Washable Interior with EPS Chin Bar Foam• Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at 12.125 inch
Center Posts• Hydration Hole/Plug in Chin Bar for Easy Setup, Remove Plug to Install
Hydration Kit.• Ear Muffs & Pads Provide Quieter Environment for Driver• M6 Inserts for Neck Restraints
Part No. Description
ZHRZ40B* RZ40 - Gloss Black
ZHRZ40W* RZ40 - White
**Specify Size When OrderingAvailable in Sizes XS - XXL
ZHRZ40BGloss Black
ZHRZ40WWhite
Zamp RZ-35 HelmetSnell SA-2015
SPECIAL ORDER ONLYRZ-35 Features Include:
• Lightweight Composite Fiberglass Shell• 7-Top Air System Plus Chin and Scalp Exhaust Vents• Plush Fire Retardant Removable/Washable Interior • Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at 12.125 inch Center Posts• Ear Muffs & Pads Provide Quieter Environment for Driver• M6 Inserts for Head & Neck Restraints
ZHRZ35WWhite
ZHRZ35BMatte Black
Part No. Description
ZHRZ35B* RZ35 - Matte Black
ZHRZ35W* RZ35 - White
**Specify Size When OrderingAvailable in Sizes XS - XXL
Zamp RZ-58 HelmetSnell SA-2015
SPECIAL ORDER ONLY
RZ-58 Features Include:• Lightweight Composite Fiberglass Shell• 7-Top Air System Plus Chin and Scalp Exhaust Vents• Plush Fire Retardant Removable/Washable Interior • Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at 12.125 inch Center Posts• M6 Inserts for Head & Neck Restraints
Part No. Description
ZHRZ58B* RZ58 - Gloss Black
ZHRZ58W* RZ58 - White
ZHRZ58FB* RZ58 - Flat Black
**Specify Size When OrderingAvailable In Sizes XS - XXL
ZHRZ58BGloss Black
ZHRZ58FBFlat Black
ZHRZ58WWhite
All prices, terms and availability subject to change without notice.
55|Zamp RZ-37Y Youth HelmetSFI 24.1/2015 & DOT
Part No. Description
ZHRZ37YB54 RZ37Y - Black (54 cm)
ZHRZ37YB56 RZ37Y - Black (56 cm)
ZHRZ37YW54 RZ37Y - White (54 cm)
ZHRZ37YW56 RZ37Y - White (56 cm)
Zamp RZ-42Y Youth HelmetSnell CMR2016 Standard
ZHRZ37YB*Black
ZHRZ37YW*White
RZ-37Y Features Include:• Smaller Shell• Lightweight Composite Fiberglass, weighs only 1250g (+/- 50)• Top Air Intake• 7-Top Air System Plus Chin and Scalp Exhaust Vents• Fire Retardant Plush Interior with Removable/Washable Liner• 2 Holes on Sides of Chin Foam for Radio/Hydration• Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at
12.125 inch Center Posts
Available in Sizes 54 cm or 56 cm
Part No. Description
ZHRZ42YB* RZ42Y - Gloss Black
ZHRZ42YW* RZ42Y - White
ZHRZ42YBO* RZ42Y - Blue/Orange Graphic
ZHRZ42YGS* RZ42Y - Green/Silver Graphic
**Specify Size When Ordering
Available in Sizes: 52 cm, 54 cm, 56 cm, 57 cm
RZ-42Y Features Include:• Lightweight Composite Kevlar Mix Shell• Smaller Shell• Top Air Intake Vents and Chin Bar Vents• Option of Running Forced Air Accessory• Fire Retardant Interior with Removable/Washable Liner• Z-20 Series 3mm Clear Shield using Banana Style Tear Offs at
12.125 inch Center Posts
ZHRZ42YBO*Blue/Orange
ZHRZ42YW*White
ZHRZ42YGS*Green/Silver
ZHRZ42YB*Gloss Black
Features include:• Attractive Black/Gray Design• Plush Interior• Large Dual Zipper Opening for Easy Access• Travel Size, Fits in Overhead Bin of Most Airlines• Dual Handles, Easy to Carry
Part No. Description
ZHHB2003 Zamp helmet bag
Zamp Helmet Bag
Featuring a rectangular design, our bag allows you to carry your favorite Zamp accessories in the bag as well. Our helmet bag also features a large top opening to make removing your helmet convenient.
All prices, terms and availability subject to change without notice.
| 56
Tear-off Post Kit
Part No. Description
SHP Tear-Off Post Kit - 1 Pair
Part No. Description
US1215B Impact Champ
US1256Zamp FS8& FS9Vega Trak (Adult Helmet Only)Bell 281 Shields/Pyrotect
US1230 Impact Charger/Vapor
Tear-Offs2 Mil Tear-Offs - Pack of 20
Part No. Description
VHHS One Size Fits All
Balaclavas
Part No. Description
ZHZ20SA Amber
ZHZ20SC Clear
ZHZ20SDT Dark Smoke Tint
ZHZ20SI Iridium
ZHZ20SM Mirror
ZHZ20BP Blue Prism (new)
ZHZ20SRP Red Prism (new)
ZHZ20SGP Gold Prism (new)
ZHZ20SS Smoke Tint
ZHZ20SCAF Clear Anti Fog
ZHZ20SDTAF Dark Smoke Anti Fog
ZHZ20PK Shield Pivot Kit
Zamp RZ44/42/40 Auto Helmet PartsPart No. Description
ZHRZEAR Ear Muffs
ZHRZCC Chin Curtain
ZHRZCF Chin Foam
ZHRZCL* Crown Liner
ZHRZCP* Cheek Pads
ZHRZCS Chin Spoiler
ZHRZRS Rear Spoiler
ZHRZVP Vent Plug
Chin Curtain
Chin SpoilerRear Spoiler
Zamp Z-20 Auto SeriesFace Shields
Iridium Blue Prism Red PrismGold Prism
Amber Dark SmokeClearSmoke Tint
* *Specifly size XS - XXL
Part No. Description
ZHFS8CL* FS8/FS9 Crown Liner
ZHFS8CP* FS8/FS9 Cheeck Pads
ZHFS8XXS FS8/FS9 XXS Cheek & Crown Kit
Zamp FS8/FS9 Replacement Liner & Cheek Pads
All prices, terms and availability subject to change without notice.
57|
S - SmokeC - Clear A - Amber
Vega Trak Jr. Youth Face Shields
**Specify shield color when ordering.
Part No. Description
VHM2S* Vega Trak Jr. Replacement Shield
VHPK2 Vega Trak Jr. Pivot Kit
Vega Trak Adult Face Shields
**Specify shield color when ordering.
Part No. Description
VHM3S* Vega Trak Adult Replacement Shield
VHPK2 Vega Trak Pivot Kit
VHPK3 Vega Trak Adult Pivot Post Kit (Metal Screw)
C - Clear S - SmokeA - Amber
Vega KJ2 Face ShieldsYouth & Adult KJ2 Helmets Take the Same Shield
Part No. Description
VHKJ2* Vega KJ2 Replacement Shield
VHKJ2PK Vega KJ2 Pivot Kit
**Specify Shield Color When Ordering
C - Clear S - Smoke
Wheel Bolt Kits
Part No. Description
VK324 1/4” Kit (3 pcs)
VK393 1/4” Self Start Kit (12 pcs)
VK405 5/16” Self Start Kit (12 pcs)
AP516BK 5/16” Kit (3 pcs)
Wheel hubs come complete with 1/4” hardware and are drilled and tapped for both 1/4” & 5/16” bolts. Front wheel hubs include 5/8” bearings.
Part No. Description
PREF 5/8” Front Wheel Hub - Plain
PREFB 5/8” Front Wheel Hub - Black
PREF34B 5/8” - 3/4” Front Wheel Hub - Black
PRER1 1” Rear Wheel Hub - Plain
PRER1B 1” Rear Wheel Hub - Black
PRER114 1-1/4” Rear Wheel Hub - Plain
PRER114B 1-1/4” Rear Wheel Hub - Black
PRER114EXB 1-1/4” Extended Rear Wheel Hub - Black
Wheel Hubs
Vega Helmet Replacement Shields
All prices, terms and availability subject to change without notice.
| 58Wheel Bearings
Part No. ID OD
MM1030 (snap ring) 5/8” 1-3/8”
MM1072 5/8” 1-3/8”
KM310 3/4” 1-5/8”
KM305 17 mm 35 mm
KM312 15 mm 35 mm
KM307 25 mm 37 mm
KM313 25 mm 42 mm
KM310, MM1030 & MM1072
KM307, KM305 & KM312
Spindle/King Pin Bearings
Part No. ID OD Width
KM216 3/8” (.375) 7/8” (.875) .281
KM299 1/2” (.5) 1-1/8” (1.125) .3125
KM300 7/16” (.4375) 1-1/8” (1.125) .375
KM304 1/2” (.5) 1-1/8” (1.125) .375
KM306 8 mm 22 mm 7 mm
KM308 10 mm 22 mm 6 mm
KM314 10 mm 26 mm 8 mm
Part No. Description
KM198 17 mm x 5 mm wide
KM198B 17 mm x 5 mm wide (Black)
KM199 17 mm x 10 mm wide
KM199B 17 mm x 10 mm wide (Black)
KM204B 5/8” x 1/8” wide (Black)
KM205 5/8” x 1/4” wide
KM205B 5/8” x 1/4” wide (Black)
KM206 5/8” x 1/2” wide
KM206B 5/8” x 1/2” wide (Black)
KM207B 3/4” x 1/8” wide (Black)
KM208B 3/4” x 1/4” wide (Black)
Aluminum Spindle Spacers
American & Metric Aluminum Spindle Spacers
Steel Axles
Part No. Description
KMA44 1-1/4” x 44”
KMA42 1-1/4” x 42”
KMA40 1-1/4” x 40”
KMA38 1-1/4” x 38”
KMA36 1-1/4” x 36”
Black anodized, tubular steel axles. All axles have opposed 1/4” keyways and .190” wall thickness. 1” diameter with 1/4” opposed keyways. Snap ring, Standard (2”)
or Short End (1-1/2”) with 3/4”- 16 threads.
Part No. Description
AE8121 Standard End (38”)
AE8122 Short End (40”)
AE8123 Snap Ring - Flexproof (40”)
AE8150 Short End - Flexproof - (40”)
Standard & Flexproof Steel Axles
All prices, terms and availability subject to change without notice.
59|
Camber Rod End Kit
Part No. Description
VK370 Complete Camber Rod End Kit
1/4” Square x 8” Axle Keystock.
Part No. Description
KMLC1 1” Lock Collar (1/4” Keyway)
KMLC114 1-1/4” Lock Collar (1/4” Keyway)
KMLC114B 1-1/4” Lock Collar (1/4” Keyway) Black
KMLC138 1-3/8” Lock Collar (1/4” Keyway)
KMLC30 30 mm Lock Collar (8 mm Keyway)
KMLC40 40 mm Lock Collar (8 mm Keyway)
KMLC50 50 mm Lock Collar (8 mm Keyway)Clamp Design, 2 Piece Aluminum Lock Collars
Aluminum Axle Lock Collars
Snap Rings for 1-1/4” Axles.
Part No. Description
KMSR114 Axle Snap Rings
Axle Snap RingsNylon 1-1/4” axle lock collar features solid brass inserts & weigh 20% less than aluminum collars
Part No. Description
RWLC114B 1-1/4” Nylon lLock Collar (1/4” Keyway)
Nylon Axle Lock Collars
Azusa Front Spindles
Part No. Description
AE2235 Spindle & Bracket (Left Hand) #1
AE2236 Spindle & Bracket (Right Hand) #2
AE8171 Bracket Only
Spindle Bracket & Assembly, 5/8” x 4-1/2”
Spindle Nut
Part No. DescriptionKM988 Spindle Nut (2 Pack)
KM5818 Spindle Nut (Individual)
5/8” 18 Slotted Spindle NutQuarter inch steel plate, pre-dilled for 2-hole or 3-hole flanges.
Part No. Description
AE8127 Hanger for 1” Axles
AE8130 Hanger for 1-1/4” Axles
Axle Bearing Hangers
Axle Bearing Flanges
Part No. Description
KM52M2 1” axle bearing flange (2 bolt)
KM52MM3T 1” axle bearing flange (3 bolt)
KM62MM3T 1-1/4” axle bearing flange (3 bolt)
Part No. Description
KMAC 1-1/4” Axle Cassettes
Axle Cassettes
Black anodized, aluminum axle bearing cassettes for 1-1/4 axle bearings. Contain 1 per package
10” Brake Disc
Part No. Description
MCP710 3/16” x 10” steel disc
Part No. Description
KMAK Axle Keystock
Axle Keys
Sold In Packages of 10
All prices, terms and availability subject to change without notice.
| 60 Axle Bearings
Part No. Axle Size OD
KMRA100 1” 2.04”
KM20720 1-1/4” 2.8”
KM20621 1-1/4” 2.44”
KM316 30 mm 62 mm
KM309 40 mm 80 mm
KM311 40 mm 80 mm 3 set screws
KM650 50 mm 90 mm
KM680 50 mm 80 mm 3 set screws
KMRA100KM20621 KM20720
KM309 KM311 KM650 KM680
Mechanical Disc Brake
Part No. DescriptionRC488 Caliper assembly
RC490 Replacement pucks
Economy Brake Disc & Hub
Part No. Description
CC212369 6-3/8” disc - 1” hub
CC212364 7-7/8” disc - 1” hub
CC212396 10” disc - 1” hub
Part No. Description
CC10978 4” band brake
CC200026 4” brake drum
CC200847 Brake anchor pin
AE2255 4-1/2” band brake & pin
4” & 4-1/2” Band Brake
Azusa 4-1/2” Brake
Part No. Description
AE2208 4-1/2” brake (5/8” hole)
AE2269 4-1/2” brake (1” hole)
AE2213 Drum with flange
AE2211 Drum without flange
AE2217 Drum & sprocket (60 tooth)
AE2218 Drum & sprocket (72 tooth)
Azusa 6” Expanding Brake
Part No. Description
AE8138 Drum only (plan finish)
AE8142 Drum & hub (chrome finish)
AE2550 Brake assembly (no drum)
AE8101 Replacement brake linings
KM309 - 34 mm overall width, 18 mm race widthKM311 - 50 mm overall width, 21 mm race width
All prices, terms and availability subject to change without notice.
61|
Standard Caliper & Parts
Part No. Description
MCP152 Caliper Rebuild Kit
MCP1375 Caliper Assembly - Not Available - Use 181375
MCP1376 Caliper Half (Body Only) - Not Available
MCP1377 Caliper Half (Complete with Pad) - Not Available
MCP1378 Piston with Seals
MCP1379 Piston O-Ring
MCP1380 Adjuster Assembly
MCP13804 Sleeve
MCP1381 Adjuster Restraint O-Ring
MCP1382 Bleed Screw Assembly
MCP13821 Bleed Screw
MCP13822 Bleed Screw Adaptor
KMBF Brass Fitting
Standard Master Cylinder & Parts
Part No. Description
MCP151 Master cylinder rebuild kit
MCP875 Master cylinder assembly - Not Available - Use 18875
MCP876 Master cylinder body only - Not Available
MCP877 Top cover
MCP878 Top cover O-ring
MCP879 Filler plug
MCP880 Cover screw
MCP881 Cover screw O-ring
MCP882 Lever arm
MCP883 Push rod
MCP884 Lever arm pivot pin
MCP885 Push rod pivot pin
MCP886 Boot
MCP887 Piston with seals
MCP888 Piston O-ring
MCP889 Piston cup seal
MCP890 Snap ring
MCP891 Spring
KMBF Brass Fitting
Brake Disc
Part No. Description
MCP711S 1/8” x 7.1” super slot disc
MCP712 3/16” x 7.1” steel slot disc
MCP713 1/4” x 7.1” steel slot disc
MCP1775 1/4” x 7.75” steel slot disc
Brake Pads
Part No. Description
MCP1383B Brake Pad (black)
MCP1383LN Brake Pad (blue)
MCP1383LNA Brake Pad (green)
Brake Disc Hubs
Part No. Description
MCP100 1” brake disc hub
MCP125 1-1/4” brake disc hub
MCP137 1-3/8” brake disc hub
MCP Standard (Cast) Brake PartsComplete Kits No Longer Available
All prices, terms and availability subject to change without notice.
| 62MCP Billet (Shim) Brake Kit - Black
Part No. Description
MCP182100 Complete brake kit (1” axle)
MCP182250 Complete brake kit (1-1/4” axle)
MCP187250 Brake kit - no line or fluid - (1-1/4” axle)
Billet Caliper & Parts
Part No. Description
MCP152 Caliper rebuild kit
MCP181375 Billett Caliper assembly
MCP1378 Piston with seals
MCP1379 Piston O-ring
MCP1184 Shim
MCP113285 Pin
MCP1382 Bleed screw assembly
MCP13821 Bleed screw
MCP13822 Bleed screw adaptor
KMBF Brass fitting
MCP555 Pad screw
MCP556 Pad screw sleeve
MCP557 Spring
Billet Master Cylinder & Parts
Part No. Description
MCP151 Master cylinder rebuild kit
MCP18875 Billet Master cylinder assembly
MCP878 Top cover O-ring
MCP879 Filler plug
MCP880 Cover screw
MCP881 Cover screw O-ring
MCP882 Lever arm
MCP883 Push rod
MCP884 Lever arm pivot pin
MCP885 Push rod pivot pin
MCP886 Boot
MCP887 Piston with seals
MCP888 Piston O-ring
MCP889 Piston cup seal
MCP890 Snap ring
MCP891 Spring
KMBF Brass FittingBrake Disc
Part No. Description
MCP711S 1/8” x 7.1” super slot disc
MCP712 3/16” x 7.1” steel slot disc **
MCP713 1/4” x 7.1” steel slot disc
MCP1775 1/4” x 7.75” steel slot disc
Brake Pads
Part No. Description
MCP1383B Brake Pad (black)
MCP1383LN Brake Pad (blue)
MCP1383LNA Brake Pad (green)
Brake Disc Hubs
Part No. Description
MCP100 1” brake disc hub
MCP125 1-1/4” brake disc hub
MCP137 1-3/8” brake disc hub
MCP878
MCP879
MCP880 MCP881
MCP887
MCP888
MCP884
MCP891
KMBF
MCP885 MCP886
MCP890
MCP889
MCP1378
MCP1379 MCP1382
MCP13821
MCP13822
KMBF
MCP555 MCP556 MCP557
MCP11328
MCP1184
**Included in Brake Kits
MCP Billet Brake Parts
All prices, terms and availability subject to change without notice.
63|
MCP MiniLite Brake KitPart No. Description
MCP2112 1-1/4” MiniLite Brake Kit - 611 rotor,125M hub
MCP2216B 1-1/4” MiniLite Brake Kit - 506 Rotor, 505 hub
MiniLite Master Cylinder
Part No. Description
MCP750 MiniLite Master Cylinder
MCP251 MiniLite Master Cylinder Rebuild Kit
MCP752 Top cover
MCP784 Lever arm pivot pin 1”
MCP786 Boot
MCP787 Piston with seals
MCP788 Piston O-ring
MCP789 Piston cup seal
MCP790 Snap ring
MCP791 Spring
MCP878 Top cover O-ring
MCP879 Filler Plug
MCP880 Cover screw
MCP881 Cover screw O-ring
MCP885 Push rod pivot pin
KMBF Brass fitting
MiniLite Caliper
Part No. Description
MCP1125 Caliper assembly
MCP352 Caliper Rebuild Kit
MCP1128 Piston with O-ring
MCP1129 O-ring
MCP1380 Adjuster assembly
MCP13804 Sleeve
KMBF Brass fitting
MCP1382 Bleed screw assembly
MCP13821 Bleed screw
MCP13822 Bleed screw adapter
MiniLite Brake Pads
Part No. Description
MCP554B MiniLite Standard Pad
MCP554LN MiniLite High Performance Blue Pad
MiniLite Brake Disc Hub
Part No. Description
MCP125M 1-1/4” MiniLite brake hub - fits 611 & 612
MCP505 1-1/4” MiniLite brake hub - fits 505 & 506
MiniLite Brake Disc
Part No. Description
MCP611 1/8” x 6” super slot disc - fits 125M hub
MCP612 3/16” x 6” steel slot disc - fits 125M hub
MCP506 1/8” x 6” steel slot disc - fits 505 hub
MCP507 3/8” X 6” steel disc - fits 505 hub
MCP526 5/16-24 x 5/8” bolt for 505 hub
MCP1382
MCP13821
MCP13822
KMBF
MCP1128
MCP1129
MCP1380 & 13804
MCP881 MCP880
MCP787
MCP789
MCP788
MCP784
MCP885
MCP786 MCP791
MCP790
KMBF
MCP879
MCP878
MCP MiniLite Brakes
All prices, terms and availability subject to change without notice.
| 64 MCP Front Brakes
Front Brake Parts
Part No. Description
MCP650 Front caliper assembly
MCP651 Caliper half (piston side)
MCP652 Caliper half (anvil side)
MCP653 Piston with O-ring
MCP554B Standard pad
MCP554LNA High performance pad
MCP555 Pad screw - piston side (2 required)
MCP556 Pad screw sleeve (2 required)
MCP557 Spring (2 required)
MCP558 Pad screw - anvil side (2 required)
MCP559 Assembly screw (2 required)
MCP560 Caliper mount bracket
MCP567 S - shaped spindle arm
MCP668 .030” steel caliper spacer
Front Brake Disc & Carriers (Hubs)
Part No. Description
MCP5654 FW Brake Hub (American) Adjustable
MCP566 1/8” x 6” steel slot disc
MCP5661 3/16” x 6” steel slot disc
Part No. Description
MCP4561 FW Brake Kit (7-1/2” disc) American
MCP4568 FW Brake Kit (6” disc) American (Adj.)
MCP Front Brake Kits
Enginetic Caliper PartsPart No. Description
EN905 Rebuild kit
MCP1379 O-ring
EN708 Shims
MCP13822 Bleed screw adaptor
MCP13821 Bleed screw
EN303 Standard brake pads
Enginetic Master Cylinder PartsPart No. Description
EN904 Rebuild kit
MCP879 Filler plug
EN604 Cover screw
EN105 Gasket
MCP889 Cup seal
Enginetics Brake Parts
Comet Disc-Caliper BrakePart No. Description
CC218070 Caliper assembly
CC217937 Caliper mounting bracket
Item No. Part No. Description
7 CC21170 Caliper half - actuator side
8 CC212104 Ramp - actuator
9 CC212106 Shaft - actuator
10 CC211673 Back up plate - actuator side
11 CC211674 Puck - actuator side
12 CC211680 Caliper puck
Caliper Parts
All prices, terms and availability subject to change without notice.
65|
Brake Line FittingsPart No. Description
KMBF Brass fitting
KM905 Brass ferrule (5 per pack)
KM905200 Brass ferrule (200 pack)
Nylon Brake LinePart No. Description
KM865 6 ft. nylon brake line
KMNT025 25ft. nylon brake line
KMNT100 100 ft. nylon brake line
KMNT1000 1000 ft. nylon brake line
Billet Master Cylinder CapPart No. Description
KM215 Master cylinder filler plug cap
Brake Rotor GuardPart No. Description
KM196 Rotor guard - Standard
KM197 Rotor guard - MiniLite
Part No. Description
MCP26SL 26” stainless steel coated line
MCP30SL 30” stainless steel coated line
MCP32SL 32” stainless steel coated line
MCP55SL 55” stainless steel coated line
MCP316 3/16” x 1/8” straight fitting
MCP390 3/16” x 1/8” 90° fitting
Steel Braided Brake Lines
Caliper & Master Cylinder Bolt
Part No. Description
VK052 Minilite rotor bolt kit (3 hole)
VK053 Standard rotor bolt kit (4 hole) 5/16”
VK307 5/16” x 2-1/4” Hex bolt - master cylinder
VK309 5/16” x 4” Hex bolt - Minilite caliper
VK316 3/8” x 4” Hex bolt - standard caliper
VK317 3/8” x 4-1/2” Hex bolt - standard caliper
Brake Bolt Kits
Rotor Bolt Kit
Part No. Description
EN406 Silicone Brake Fluid (4 oz.)
EN412 Silicone Brake Fluid (16 oz.)
EN912 Bleeder Kit
Brake Fluid & Bleeder
Dot 5 Brake Fluid for MCP Brakes
Pedals
Part No. Description
AE1806 Brake pedal
AE1811 Throttle pedal
KM302 Throttle pedal (Coyote style)
KM303 Brake pedal (Coyote style)
AE1806 & AE1811KM302 & KM303
Part No. Description
MCP399 MCP brake fitting ferrule
MCP Fitting Ferrule
All prices, terms and availability subject to change without notice.
| 66
Clevis & Pin
Part No. Description
AE8354 Clevis
AE8355 Clevis Pin
Rod Anchor
Part No. Description
AE8182 Rod Anchor Bracket
Part No. Description
KM355 Aluminum Pedal Clevis (Black)
AE8355 Clevis Pin
Aluminum Pedal Clevis & PinThrottle Rod Spring
Part No. Description
KMTRS Throttle Rod Spring
Econo Mini Starter
Part No. Description
KM10DT Drive tube - 10-12” (standard & gear reduction) *
KM11S1 5/8” OD shaft - 5/16” hex 3/8” square *
KM11S2 5/8” OD shaft - 3/8” square - No socket
KM11S3 5/8” OD shaft - 1/2” square - 3/4” socket
KM11S4 5/8” OD shaft - 1/2” square - 15/16” socket
KM11S5 5/8” OD shaft - 3/8”” square - No socket
KM11S7 Econo drive shaft & 5/16” hex tip
A lightweight starter with the power in the motor and gear reduction to start any kart, all day, on one charge.
Drive Tube for Older Mini & Self Contained Starters
Part No. Description
KMSM1 Econo Mini Gear Drive Starter
KMSB33 Starter solenoid
Features Include:• Weighs Only 18 lbs• Postive On/Off Safety Switch• Soft Sure Grip Handles & CNC Machined Parts• Battery NOT Included
Rookie Pedal AdaptorSold Individually
Part No. Description
KM722 Pedal Adaptor
Pedal CoversSold In Pairs
Part No. Description
KM810* 14 mm or 1/2” ID (Plain) - 1 Pair
KMPC* 3/8” ID (Plain) - 1 Pair
Aluminum pedal covers for 3/8”, 1/2” & 14 mm pedals
Specify Color when Ordering: B - Black BLU - Blue R - Red P - Purple
(Purple Not Available in 3/8”)
All prices, terms and availability subject to change without notice.
67|Bolt KitsPart No. Description
VK001 Briggs header bolt kit (standard)
VK002 Animal/F2000 header bolt kit (metric)
VK003 Clutch bolt kit (3/4”)
VK0031 Clutch bolt kit (1”)
VK005 Clone header bolt kit (25 mm)
VK006 Clone header bolt kit (30 mm)
VK012 Steering wheel bolt kit
VK052 Minilite rotor bolt kit
VK053 Standard rotor bolt kit
VK147 Chain guard bolt kit (SAE)
VK149 Chain guard bolt kit (Metric)
VK150 Clone exhaust nuts
VK173 Fuel tank screws
VK303 5/16” x 1-1/4” Hex bolt - tie rod
VK304 5/16” x 1-1/2” Hex bolt - tie rod
VK305 5/16” x 1-3/4” Hex bolt - tie rod
VK306 5/16” x 2” Hex bolt - tie rod
VK307 5/16” x 2-1/4” Hex bolt - master cylinder
Part No. Description
VK308 5/16” x 2-1/2” Hex bolt - pitman arm
VK309 5/16” x 4” Hex bolt - Minilite caliper
VK310 3/8” x 1-1/4” Hex bolt - tie rod
VK311 3/8” x 1-1/2” Hex bolt - tie rod
VK312 3/8” x 1-3/4” Hex bolt - tie rod
VK313 3/8” x 2” Hex bolt - tie rod
VK314 3/8” x 2-1/4” Hex bolt - tie rod
VK315 3/8” x 2-1/4” Hex bolt - pitman arm
VK316 3/8” x 4” Hex bolt - standard caliper
VK317 3/8” x 4-1/2” Hex bolt - standard caliper
VK320 Seat bolt kit
VK324 Wheel bolt kit - 1/4”
VK325 Sprocket hub bolt kit
VK347 Clone choke lock & screw
VK350 Nerf bar pin kit
VK391 Bumper mount hardware
VK393 1/4” Self-start wheel bolt kit (12 pcs)
VK405 5/16” Self-start wheel bolt kit (12 pcs)
Part No. Reach Qty.
AL292 3/8” (14 mm thread) 4
AL353 3/8” (14 mm thread) 4
AL411 1/2” (14 mm thread) 4
AR2592 3/4” (14 mm thread) 4
AR2593 3/4” (14 mm thread) 4
AL2852 1/2” (14 mm thread) - Surface Gap 4
AR3910 3/4” (14 mm thread) 4
AR3910X 3/4” (14 mm thread) - Surface Gap 4
AR3924 3/4” (14 mm thread) 4
AR3933 3/4” (14 mm thread) 4
AL4062 3/4” (14 mm thread) 4
AL4063 3/4” (14 mm thread) 4
AL4092 1/2” (14 mm thread) 4
Autolite Spark Plugs
Part No. Reach Qty.
AR50 3/4” (14 mm thread) 4
AR51 3/4” (14 mm thread) 4
AR52 3/4” (14 mm thread) 4
AR53 3/4” (14 mm thread) 4
Wheel Bolt KitSteering Wheel /
Rotor Bolt Kit Clutch Bolt Kit Chain Guard Bolt Kit Clone Exhaust Nuts Fuel Tank Screws Tie Rod Bolt Kit
Caliper Bolt &Pitman Arm Bolt Seat Bolt Kit
Sprocket HubBolt Kit
Clone ChokeLock & Screw Nerf Bar Pin Kit
Bumper MountHardware
All prices, terms and availability subject to change without notice.
| 68 Denso - Standard Spark Plugs
Part No. Reach Box Qty.
NDW20EPRU 3/4” (19 mm) 4
NDW20MPU .339” (8.6 mm) 10
NDW22MPU .339” (8.6 mm) 10
NDW14U 3/8” (9.5 mm) 10
NDW16SU 3/8” (9.5 mm) 10
NDW20SU 3/8” (9.5 mm) 10
NDW22SU 3/8” (9.5 mm) 10
NDW24SU 3/8” (9.5 mm) 10
NDW27SU 3/8” (9.5 mm) 10
NDW31SU 3/8” (9.5 mm) 10
NDW22ESU 3/4” (19 mm) 4
NDW24ESU 3/4” (19 mm) 10
NDW27ESU 3/4” (19 mm) 10
NDW31ESU 3/4” (19 mm) 10
NDW14FU 1/2” (12.7 mm) 10
NDW16FSU 1/2” (12.7 mm) 4
NDW20FSU 1/2” (12.7 mm) 4
NDW22FSU 1/2” (12.7 mm) 10
NDW24FSU 1/2” (12.7 mm) 10
NDW27FSU 1/2” (12.7 mm) 10
NDW31FS 1/2” (12.7 mm) 10
Part No. Reach Box Qty.
NDU20ESRN 3/4” (10 mm) 10
NDU22ESRN 3/4” (10 mm) 10
NDU24ESRN 3/4” (10 mm) 10
NDU27ESRN 3/4” (10 mm) 10
Denso - Briggs World Formula
Part No. Reach Box Qty.
NDQ16RU11 3/4” (14 mm) 4
NDQ20RU11 3/4” (14 mm) 4
NDQ22PRU11 3/4” (14 mm) 4
NDIK20 3/4” (14 mm) Iridium 4
NDIK22 3/4” (14 mm) Iridium 4
NDIK27 3/4” (14 mm) Iridium 4
Denso - Briggs Animal
Part No. Reach Box Qty.
NDIW24 3/4” (19 mm) 4
NDIW27 3/4” (19 mm) 4
NDIW29 3/4” (19 mm) 4
NDIW31 3/4” (19 mm) 4
NDIW34 3/4” (19 mm) 4
By harnessing the power of Iridium, we were suddenly able to shrink the surface area of the center electrode—the critical component of a spark plug. Unlike a typical platinum plug that has a 1.1mm diameter center electrode, the DENSO Iridium Power spark plug has the world’s smallest center electrode measuring 0.4mm in diameter.
All prices, terms and availability subject to change without notice.
69|Spark Plug Resistor Caps
Part No. Description
NGKTB05EMA 14 mm connector (rubber boot)
NGKLB05E 14 mm resistor cap (for use with nut)
Part No. Description
KM4813 Spark Plug Index Washers
Index Washers
Kit Contains 10 each of: .019, .024, &.034 Washers
Seat Bolt Kit
Part No. Description
VK320 Seat Bolt Kit
Part No. Description
KM220 Rubber grommets
Rubber Grommets
Tough rubber grommets are ideal for mounting seats, bodywork & nerf bars.
Aluminum conical washers are available in 5 colors.
Part No. Description
KM620* For 6 mm or 1/4” hardware (Plain)
KM625* For 8 mm or 5/16” hardware (Plain)
Specify color: B = Black, BLU = Blue, G = Gold and R = Red.
Conical Washers
Aluminum Seat Washers
Part No. Description
PPSW5 Aluminum seat washer - 5 mm
PPSW10 Aluminum seat washer - 10 mm
PPSW20 Aluminum seat washer - 20 mm
This 3-piece set is designed to fit our “Star” fiberglass seats, along with almost any other type of fiberglass or plastic sprint seat. Made from a heavyweight canvas material, it attaches by a Velcro strip that is sewn to the back of the pad, with the other applied to the seat with a self-adhesive
Part No. Description
RW400 3-piece set - Black Only
Kart Racewear Seat Padding
The Seat Pad Kit is designed to absorb vibration and impacts while the driver is on the track. Made from Zorbium Foam®, the Seat Pad Kit absorbs the most vibration and offers the best comfort to the driver of any seat padding kit available.
Part No. Description
VA20S Fits Jr, XS & S - Sprint & Oval seat
VA20L Fits M & up - Sprint & Oval seat
Team Valhalla Seat Pad Kit
All prices, terms and availability subject to change without notice.
| 70Renegade plastic seats are offered in 5 sizes.
Part No. Description
CM1100S Sprint seat - Small - 12-1/2” wide
CM1100M Sprint seat - Medium - 13” wide
CM1100L Sprint seat - Large - 13-3/4” wide
CM1100XL Sprint seat - Extra Large - 14-1/2” wide
CM1100XXL Sprint seat - Double Extra Large - 16” wide
Star Fiberglass Sprint Seats
Part No. Size A B C
KMSS Small 11.5” 12.75” 16.75”
KMSM Medium 12.25” 13.5” 17.25”
KMSL Large 13” 14.25” 18”
KMSXL X-Large 13.75” 15” 18.75”
KMSXXL XX-Large 15.75” 17” 20.75”
Die cut, dense foam seat padding; self-adhesive for convenient installation 1/2” thick.
Part No. Description
RWSP601 Roll - 1/2” x 3” x 6’
RWSP603 Pre-cut 3-piece set - 1/2” thick
RWSP605 Roll - 1/2” x 4” x 6’
RWSP607 Sheet - 1/2” x 24” x 32”
Star Fiberglass Oval Seats
Part No. Size A B C
KMOSJR Junior 10.5” 9.75” 17”
KMOSS Small 11.75” 11” 20”
KMOSM Medium 13.25” 12.5” 21”
KMOSL Large 14.25” 13.25” 22”
KMOSXL X-Large 15.5” 14.5” 23”
KMOSXXL XX-Large 16” 15.25” 24”
KMOSXXXL XXXL-Large 17” 16” 25”
C
A
B
Outside
Inside
Inside
Renegade Plastic Sprint Seats
Foam Seat Padding
Mount directly to the frame with 4 bolt stamped flange clamps. Constructed of 3/4” steel heavy wall tubing, MIG welded, and plated for lasting appearance and durability.
Part No. Description
KM720 Straight Cross Member
KM721 Side Rail
KM200 Adjustable
Fits 1-1/8” & 1-1/4” Frame Rails
Seat Struts - Frame Mount
All prices, terms and availability subject to change without notice.
71|
Perfect Gas-Oil premix every time. No guesswork, no figuring, no mistakes.
Part No. Description
WB300 Ratio Rite Cup
WB301 Ratio Rite Lid
Ratio Rite
Part No. Description
PPSB315 Seat Strut - Single Bend 315 mm (12-5/8”)
PPSB355 Seat Strut - Single Bend 355 mm (15-1/2”)
PPSB390 Seat Strut - Single Bend 390 mm (14-3/4”)
Seat Struts - Single BendSeat Struts - Straight
Part No. Description
PPSS225 Seat Strut - Straight 225 mm (8-7/8”)
PPSS240 Seat Strut - Straight 240 mm (9-1/2”)
PPSS260 Seat Strut - Straight 260 mm (10-1/4”)
PPSS275 Seat Strut - Straight 275 mm (10-7/8”)
PPSS300 Seat Strut - Straight 300 mm (11-3/4”)
PPSS335 Seat Strut - Straight 335 mm (13-1/4”)
PPSS355 Seat Strut - Straight 355 mm (14-1/4”)
PPSS375 Seat Strut - Straight 375 mm (15”)
PPSS395 Seat Strut - Straight 395 mm (15-3/4”)
Part No. Description
PPSSMB295 Seat strut - multi bend 295 mm (11-5/8”)
PPSSMB330 Seat strut - multi bend 330 mm (13-1/4”)
PPSSMB350 Seat strut - multi bend 350 mm (13-7/8”)
Seat Struts - Multi-Bend
Seat Bolt KitPart No. Description
VK320 Seat Bolt Kit
Tri-Flow Superior Lubricant provides twice the lubricating power of most competitive brands. It’s light viscosity allows for deep penetration into hard to reach moving parts.
Part No. Description
TF6 6 oz. (12 per case)
TF12 12 oz. (6 per case)
Tri-Flow Superior LubricantSold Individually
Klotz Chain LubeSold Individually
Klotz chain lubes are formulated to provide the maximum level of lubrication and wear protection.
Part No. Description
KL500 Hi-performance chain case lube - 12 oz.
KL605 Hi-perormance chain lube - 15.5 oz aerosol
KL611 KLR chain lube - 16 oz. aerosol
Sold individually - (10 cans per case)
Part No. Description
KL606 Foam Filter Oil - 15.25 oz. aerosol
KL607 Fabric Filter Oil - 15.25 oz. aerosol
KL608 Filter Cleaner - 15.25 oz. aerosol
Klotz Foam & Fabric Air Filter Oil is for all street, off-road and racing foam filter applications
Klotz Filter Oil
Klotz Filter CleanerKoltz Filter Cleaner removes dirt & oil from air filters for increased air flow and performance. Safe for use on all foam and fabric filters.
Sold Individually
All prices, terms and availability subject to change without notice.
| 72Klotz 2 Cycle Oils
Klotz Super Techniplate®Sold Individually
Part No. Description
KL100 Super TechniPlate - 1 Quart
10 Quarts Per Case
Contains 80% Original Techniplate Synthetic Lubricant and 20% BeNOL Racing Castor Lubricant. Provides the Clean Burn™ quality of Klotz Synthetic Lubricants along with the exceptional strength of Castor Oil
Klotz R-50 Techniplate®Sold Individually
Part No. Description
KL104 R50 TechniPlate - 1 Quart
10 Quarts Per Case
R-50 is a pure synthetic lubricant designed exclusively for use in all sustained Hi-RPM 2 Stroke racing engines.
Klotz Original TechniPlate®Sold Individually
Part No. Description
KL200 Original TechniPlate - 1 Quart
10 Quarts Per Case
Klotz Clean Burn Technology™ virtually eliminates carbon and residue build up. Extreme film strength engineered to reduce engine component wear and increase horsepower.
Klotz BeNOL® Racing Castor OilSold Individually
BeNOL® provides twice the film strength and load carrying capacity over conventional castor oils.
Part No. Description
KLBC175 BeNOL Racing Castor - 1 pint10 Pints Per Case
10 Quarts per Case
Klotz 4-Cycle Kart OilsPure Estorlin® Kart 4-Stroke Performance
Sold Individually
Part No. Description
KE220 Kart 4 Cycle 0W/20 - 1 quart
KE230 Kart 4 Cycle 0W/30 - 1 quart
KE240 Kart 4 Cycle 0W/40 - 1 quart
• Designed for All Air-Cooled Splash Type Systems• Lowers Engine Temperatures• Increases Power and Torque• Reduces Friction and Wear• Rust and Corrosion Inhibitors• Compatible with Conventional Oils and Most Synthetics• Recommended for Use with Gasoline, Alcohol, Ethanol or
Nitro Fueled Engines
Klotz Nitro is an oxygenating power additive developed for gasoline and methanol alcohol fuels.
Klotz Nitro Power AdditiveSold Individually
Part No. Description
KL600 Nitro Power Additive - 16 oz.
(10) 16 oz. Bottles Per CaseThis Item Cannot Be Shipped to California
TechniPlate synthetic Assembly Lube provides needed lubrication during the critical first moments an engine runs
Part No. Description
KL311 Assembly Lube
Klotz Assembly LubeSold Individually
All prices, terms and availability subject to change without notice.
73|Fabric Air FiltersPart No. Description
AFR20 3” x 4” - 1-11/16” ID
AFR50 3-1/2” x 4” - 2-1/16” ID
AFR52 3-1/2” x 6” - 2-1/16” ID
AFR80 3-1/2” x 4” - 2-7/16” ID
AFR82 3-1/2” x 6” - 2-7/16” ID
AFR83 4-1/2” x 4” - 2-7/16” ID
AFR84 4-1/2” x 5” - 2-7/16” ID
AFR100 3” x 4” - 1-1/4” ID
AFR110 3” x 5” - 1-1/4” ID
AFR1100 3-1/4” x 4” - 1-1/4” ID
AFR1200 4-1/2” x 4” - 1-1/4” ID
AFR146 4” x 5” - 2-3/4” ID (10º angle)
AFR175 3-1/2” x 4” - 2-7/16” ID (20º angle)
AFR177 3-1/2” x 6” - 2-7/16” ID (20º angle)
AFR179 3-1/2” x 8” - 2-7/16” ID (20º angle)
AFR80TC 3-1/2” x 4” - 2-7/16” ID (tapered chrome)
AFR1250TC 3-1/2” x 4” - 2-1/4” ID (tapered chrome)
AFCL Air Filter Clamp (Large)
AFCS Air Filter Clamp (Small)
AFR20 AFR50 AFR52 AFR80 AFR82
AFR83 AFR84 AFR100 AFR110 AFR1100
AFR175 AFR177AFR1200
AFR146 AFR179 AFR1250TC AFR80TC
Easy to Clean, Washable Foam Air Filters fit most Adapters
Part No. Description
UI425 4” Long - 2-1/4” ID
UI625 6” Long - 2-1/2” ID
Foam Air Filters Air Filter Clamps
Part No. Description
AFCL Air Filter Clamp (Large)
AFCS Air Filter Clamp (Small)
Outerwears are designed to keep the biggest and most damaging particles of debris from getting to your air filter.
Part No. Description
OW1035T 3” x 3” Prefilter (Black Only)
OW104T* 3” x 4” Prefilter
OW105T* 3” x 5” Prefilter
OW144T* 4-1/2” x 4” Prefilter
OW145T* 4-1/2” x 5” Prefilter
OW146TBLK 4-1/2” x 6” Prefilter (Black Only)
OW1154T* 3-1/2” x 4” Prefilter
OW1156T* 3-1/2” x 6” Prefilter
OW1158T* 3-1/2” x 8” Prefilter
Outerwears PreFilters
All prices, terms and availability subject to change without notice.
| 74
Filter AdaptersPart No. DescriptionKM189 Clone Filter Adapter
KM190 PKT Clone Aluminum Filter Adapter - 2-7/16” OD (black)
KM195 Clone Stamped Filter Adapter - 2-7/16” OD
KMBFA Briggs Aluminum Filter Adapter - 2-7/16” OD
Foam PreFiltersPart No. Description
UIPF 3-1/2” x 5” - Red
UIPFHQ 3-1/2” x 5” - Red (premium prefilter)
UIPFL 3-3/4” x 6” - Yellow
UIPFLC 3-3/4” x 6” - Yellow (Closed end)
UIPF3128 3-1/2” x 8” - Blue - 50 ppi
UIPF3128BLK 3-1/2” x 8” - Black - 80 ppi
UIPF3128Y 3-1/2” x 8” - Yellow - 65 ppi
UIPF4125 4-1/2” x 5” - Blue
UIPF110 3” x 5” - Red
Part No. Description
RLVISL Air box - straight inlet
RLVABH Air box rain hood
RLV0362 Air box tube - 2 mm
RLVAF Internal filter - straight
RLVAFA Internal filter - angled
WKA & CIK Legal and IKF Approved.RLV Enviro-Safe Intake Silencers
Part No. Description
RLV4100 1” Exhaust Silencer - (B91)
RLV4102 1-1/8” Exhaust Silencer - (B91L)
RLV4104 1-5/16” Exhaust Silencer - (B91XL)
RLV4106 1-5/16” Modified & Open - (B91MO)
RLV4117 Clone Silencer
RLV4145 1” Lock Collar - Fits B91
RLV4146 1-1/8” Lock Collar - Fits B91L
RLV4147 Stainless Steel Silencer Hose Clamp for 4104 (B91XL) or 4106 (B91MO)
RLV Enviro-Safe 4-cycle silencers are WKA legal & IKF approved. Designed to reduce noise (4 dB to 6 dB) and backfire of the 4 cycle engine, not the horsepower.
RLV 4-Cycle Silencers
RLV Yamaha Box Mufflers
Part No. Description
RLVYBX Junior & Senior Sportsman (7500)
RLVSSX Super Sportsman (7548)
RLV7516 SSX End Cap
KM190 KM195 KMBFAKM189
All prices, terms and availability subject to change without notice.
75|
Exhaust Gaskets
RLV5438RLV0517
RLV5506
RLV5507
RLV4156
Part No. Description
CKEX Briggs Aftermarket Exhaust Gasket - 10 Pack
CKEX100 Briggs Aftermarket Exhaust Gasket - 100 Pack
KM4900 Clone Exhaust Gasket - 10 Pack
KM4901 Clone Exhaust Gasket - 100 Pack
KM4950 Clone Exhaust Gasket (copper) - 5 Pack
PL27520 Animal Aftermarket Exhaust Gasket (fiber)- 10 Pack
PL27551 Animal Aftermarket Exhaust Basket (copper) - 5 Pack
PL27520 KM4900
CKEX KM4950
PL27551
RLV5530
Part No. Description
RLV5438 Clone Header Pipe
RLV5506 206 Spec Pipe
RLV5507 206 Jr. Spec Pipe & Mount
RLV5530 Animal/206 pipe - Cage Karts
RLV0517 Mount for 5506 Pipe
RLV4156 Mount for 5507 Pipe
RLV Header Pipes
Part No. Description
LA4995 1” x 5’ Rubber Header Sleeve
LA49910 1” x 10’ Rubber Header Sleeve
LA49925 1” x 25’ Rubber Header Sleeve
LA49950 1” x 50’ Rubber Header Sleeve
LA499100 1” x 100’ Rubber Header Sleeve
Rubberized Header Wrap SleevesSilicone Rubber Exterior with a Fiberglass Interior
Part No. Description
LA64890 10’ x 2” x 1/16” Header Insulation Tape
LA64880 25’ x 2” x 1/16” Header Insulation Tape
LA64870 50’ x 2” x 1/16” Header Insulation Tape
LA64850 100’ x 2” x 1/16” Header Insulation Tape
Header Wrap Braided Header Sleeve
Part No. Description
LA79210 7/8” Braided Sleeve - 10 ft.
LA79225 7/8” Braided Sleeve - 25 ft.
LA79250 7/8” Braided Sleeve - 50 ft.
LA792100 7/8” Braided Sleeve - 100 ft.
Part No. Description
LA80006K 6” Sleeve kit - Includes 2 Clamps
LA80010 10’ x 1-1/2” Silencer Sleeve
LA80025 25’ x 1-1/2” Silencer Sleeve
LA80050 50’ x 1-1/2” Silencer Sleeve
LA80100 100’ x 1-1/2” Silencer Sleeve
Braided Silencer Sleeve
All prices, terms and availability subject to change without notice.
| 76Part No. Description
VK150 Clone Exhaust Nuts
Clone Exhaust Nuts
Odenthal 4 Cycle EZ-Set Motor MountsWorks with most LO206, Briggs, Clone, Honda and F2000 Engines
The EZ-Set 4-Cycle Mount features a slider mount base and plate with multiple mounting holes providing the versatility to run clutch inboard or outboard. Mount angle is 8 degree.
Part No. Description
ODESAES43090 Euro Mount, 30 x 90 mm
ODESAES43092 Euro Mount, 30 x 92 mm
EZ-Set Euro MountsThe Euro Mount is engineered for International Chassis with a 30 mm frame rail diameter and 90 mm center to center measurement. Specially designed front and rear clamps provide more positive grip and less change of crushing the frame rail.
Part No. DescriptionOD3090F FRONT Euro Mount Clamp 30 x 90 mm
OD3092F FRONT Euro Mount Clamp 30 x 92 mm
OD3090R REAR Euro Mount Clamp 30 x 90 mm
OD3092R REAR Euro Mount Clamp 30 x 92 mm
ODMCB 10 mm x 30 mm Clamp Bolt
EZ-Set Euro Mount ClampsSold Individually
Part No. Description
ODESA4SI28 Standard, 28 x 92 mm
ODESA4SI30/K28 Standard, 30 x 92 mm & 28 x 90 mm
ODESA4SI32/K30 Standard, 32 x 92 mm & 30 x 90 mm
ODESA4Sk32 Standard 32 x 90 mm
Part No. Description
ODI28 Standard Clamp Mount 28 x 92 mm
ODI30/K28 Standard Clamp Mount 30 x 92 mm & 28 x 90 mm
ODK30/I32 Standard Clamp Mount 30 x 92 mm & 32 x 92 mm
ODK32 Standard Clamp Mount 32 x 90 mm
ODMCB 10 mm x 30 mm Clamp Bolt
Standard Mount ClampsSold Individually
EZ-Set Standard Mounts
Each EZ-Set Mount includes:• Mount Base• Mount Plate• Front & Rear Clamp• Mounting Hardware
Header Bolt Kit
Part No. Description
VK001 Briggs header bolt kit (standard)
VK002 Animal/LO206/F2000 header bolt kit (metric)
VK005 Clone header bolt kit (25 mm)
VK006 Clone header bolt kit (30 mm)
All prices, terms and availability subject to change without notice.
77|Top quality, black anodized, lightweight adjustable motor mount. Includes all hardware and zinc coated butterfly clamps. Fits 1-1/4” rail
4-Cycle Angled Motor Mount
Part No. Description
PM202W 8º Mount - International
PM203W 15º Mount - International
Wide Top Plate MountsPart No. Description
PM204 Extended Right - International
Dual 8°/15° MountPart No. Description
PM36I8MPSP 8º° Mount - International
PM36I15MPSP 15º Mount - International
Slider Mounts
Part No. Description
PM36I305 15º - International
PM36A305 15º - American
PM36MP Top Plate Only
305/GX390 Mounts
Mount Parts and Accessories
Part No. Description
PM100 0º Mount
PM101 5º Mount
PM102 8º Mount
PM103 15º Mount
AmericanPart No. Description
PM200 0º Mount
PM201 5º Mount
PM202 8º Mount
PM203 15º Mount
PM36I8MPTHK 8º Mount w/3/4” Top Plate
PM36I15MPTHK 15º Mount w/ 3/4” Top Plate
International
4-Cycle Aluminum Motor MountDesigned for the Box Stock Classes, these 2 piece mounts are precision machined from lightweight aluminum and engineered to provide tire clearance.
Includes Stamped Steel Butterfly Clamps
Part No. Description
KMBAM1 1-1/8” - American
KMBAM2 1-1/8” - International
KMBAM1141 1-1/4” - American
KMBAM1142 1-1/4” - international
KMBAM30 30 mm - international
Angled
Part No. Description
KMBFM1 1-1/8” - American
KMBFM2 1-1/8” - International
Flat
Includes Stamped Steel Butterfly Clamps
Part No. Description
PM300 Standard Top Plate Only
PM300W Wide Top Plate Only
PM301 American Clamp Set
PM302 International Clamp Set
PM303 Hardware Kit
Part No. Description
PM304 Base Plate Bolt Kit (2 Bolts, Washers & Lock Nuts)
PM306 International Clamp Set - Aluminum
PM36MPBS Slider Plate (Base Only)
PM36MPTS Slider Plate (Top Only)
PM36MPSP Slider Plate Assembly
All prices, terms and availability subject to change without notice.
| 78
Universal Motor MountsPart No. Description
AE8155 Swing Mount 1” or 1-1/4” axles
AE8190 Flat Mount 5” x 12”
AE8191 Flat Mount 8-3/4” x 7-3/4”
Butterfly ClampsPart No. Description
GPG1299 Large Clamp - International
GPG1300 Small Clamp - American
Flange Nuts
Part No. DescriptionAP1428 1/4 - 28 flange nuts - smooth
AP51624 5/16-24 flange nuts - smooth
AP142812 14-28 flange nut - 1/2” head
Sold in Packs of 25 or 100
KM4950
Part No. Description
CKEX Briggs Aftermarket Exhaust Gasket - 10 Pack
CKEX100 Briggs Aftermarket Exhaust Gasket - 100 Pack
KM4900 Clone Exhaust Gasket - 10 Pack
KM4901 Clone Exhaust Gasket - 100 Pack
KM4950 Clone Exhaust Gasket (copper) - 5 Pack
PL27520 Animal Aftermarket Exhaust Gasket (fiber)- 10 Pack
PL27551 Animal Aftermarket Exhaust Basket (copper) - 5 Pack
PL27520 KM4900PL27551
Exhaust Gaskets
CKEX
Briggs Aftermarket GasketsPart No. Description
PL270026 Carb diaphragm
PL27909 Intake gasket
PL27911 Tank mounting gasket
PL270383 Head Gasket
PL270080 Crankcase gasket
PL27549 Valve cover gasket
PL27911 PL270026 PL270080
PL270383 PL27549 PL27909
High performance diaphragm and gasket kit for Burris/Mikuni carburetors. Gasket materials surpass OEM specifications and are resistant to all fuels used in racing applications.
Part No. Description
LP130 Burris/Mikuni carb kit - 7 piece
Burris/Mikuni Carb Kit
Sold in Quantities of 10
All prices, terms and availability subject to change without notice.
79|
Walbro WB3A Yamaha Carb
Part No. Description
WB31 Yamaha Walbro Carb Assembly
Walbro WA55 Carb Kits
Part No. DescriptionWB55K10 WA55 Carb Rebuild Kit
WB55D10 WA55 Gasket & Diaphragm Kit
WB55K10 WB55D10
WBK10 WBD10
Walbro WB3A Yamaha Carb Kits
Part No. Description
WBK10 Walbro WB3A Carb Rebuild Kit
WBD10 Walbro WB3A Gasket & Diaphragm Kit
Walbro Fuel Pump
Part No. Description
WB100 Walbro Fuel Pump
WBK101 Fuel Pump Repair Kit (New Round Style)
WBK210 Fuel pump repair kit (Old Square Style)
Aftermarket High Volume Fuel Pump
Part No. Description
KM315 High volume fuel pump
WBK101 Fuel pump repair kit (new round style)
WBK210 Fuel pump repair kit (old square style)
LP102 LP401
High performance diaphragm and gasket kit for Tillotson carburetors. Gasket materials surpass OEM specifications and are resistant to all fuels used in racing applications.
Part No. Description
LP102 Tillotson HL Kit - 7 piece
LP401 Tillotson HL Kit - 5 piece
LP016 Flange gasket - fits LP102 & LP401
Tillotson Carb Kits
Briggs Animal Aftermarket GasketsSold In Packs of 10
Part No. Description
PL27500 Side cover gasket
PL27520 Exhaust gasket (fiber)
PL27530 Intake gasket
PL27500 PL27520PL27530 PL27510 PL27540
Sold Individually
Part No. Description
PL27510 Head gasket
PL27540 Rocker cover gasket
PL27551
Sold In Packs of 5
Part No. Description
PL27551 Exhaust gasket (copper)
All prices, terms and availability subject to change without notice.
| 80 Mikuni Fuel Pumps & Repair Kits
Part No. Description
LP425 Mikuni single outlet fuel pump
LP449 Mikuni single outlet repair kit
LP427 Mikuni dual outlet fuel pump
LP450 Mikuni dual outlet repair kit LP425 LP449 LP427 LP450
Fuel Line Clamp
Part No. Description
KMSIC Clamp fits 3/16” & 1/4” fuel Part No. DescriptionKMFLCL 7/16” Double Wire Hose Clamp
KMFLCS 3/8” Double Wire Hose Clamp
Double Wire Hose Clamps
Transparent Colored Fuel Line
**Specify Length When Ordering 50, 100 or 500 ft.
Part No. Description
AH* Orange
AHB* Blue
AHC* Clear
AHP* Purple
AHR* Red
AHY* Yellow
1/4” ID x 3/8” OD
Part No. Description
AH14716 Clear fuel line 100 ft. roll
1/4” ID x 7/16” OD Clear Fuel Line
Only Available in 100 ft. roll
Transparent Yellow Colored Fuel LinePremium Non-Hardening Fuel Line
Part No. Description
AHZ25 25 ft.
AHZ50 50 ft.
AHZ100 100 ft.
1/4” ID x 3/8” OD
Only Available in Yellow
Floor mounted 2 quart plastic tanks with front & rear mounts. Includes shut off valve.
Part No. Description (L x W x H)
KMT2 2 QT. - 7-1/2” x 4” x 5-1/2”
KMT2CAP Replacement cap
Plastic Tank
Fuel Filters
Part No. Description
KMFFSM Small - 1/4” OD - 2-1/8” long
KMFFL Large - 1/4” OD - 3-3/4” long
LP700M Walbro style - 1/4” OD
Gas or Alcohol
KMFFSM LP700MKMFFL
Part No. Description
KMFFS Small - 1/4” OD - 2-1/8” long
KMFF90 90º - 1/4” OD
LP700A Walbro style - 1/4” OD
Gas Only
LP700AKMFFS KMFF90
All prices, terms and availability subject to change without notice.
81|
Animal Pulse Plug
Part No. Description
KM619 Animal Pulse plug
KM619R Optional O-ring for pulse plug
Animal Oil Fill Plug
Part No. DescriptionPP100 Animal oil fill plug with O-ring
KM619R O-ring
Fuel & Oil Fittings
Part No. Description
KM30 1/8” straight fitting
KM35 1/8” plastic plug
KM36 Single outlet shut off
KM40 90º elbow fitting
KM500 1/4 turn plastic shut off valve
LP800 1/4” to 3/16” fuel line reducer
LP801 1/4” fuel line “Y” fitting
LP802 1/4” fuel line “T” fitting
KM30 KM35 KM36 KM40
KM500 LP800 LP801 LP802
Part No. Description (L x W x H)
VKA4010 4 QT (6” x 7.5” x 5) Low Profile
VKA4011 2 QT (9” x 2.5” x 7.75”)
VKA4012 4 QT (9” x 4.75” x 7.75”)
VKA4013 6 QT (9” x 7.5” x 7.75”)
VKA4014 5 QT (9” x 6” x 7.75”)
VKA4015 7 QT (9” x 8.5” x 7.75”)
VKA4016 2 QT (6” x 4” x 5-1/4”) Kid Kart
VKA4017 3 QT (9” x 3-3/4” x 7-3/4”)
VKA4005 Plastic fuel tank cap
Aluminum fuel tanks with internal sump for positive fuel pickup for sprint & speedway racing. Includes shut off
Aluminum Fuel Tanks
VKA4013 VKA4014 VKA4015
VKA4011 VKA4012VKA4010
VKA4005VKA4016 VKA4017
All prices, terms and availability subject to change without notice.
| 82Oil Catch Tank
Part No. Description
CK1011 Strut mount catch tank
CK1011B Strut mount catch tank (Black)
Breather Adapter Fittings
Part No. Description
KM614 Clone breather adapter
KM618 Animal breather adapter elbow with bushing
KM618R Replacement Bushing for KM618KM614 KM618KM618R
Weight Brackets
Part No. Description
KMWB34 3/4” weight bracket
KMWB1 1” weight bracket
KMWB118 1-1/8” weight bracket
KMWB114 1-1/4” weight bracket
KMWB30 30 mm weight bracket - black
KMWB32 32 mm weight bracket - black
Universal Mounting Brackets
Part No. Description
KM230 3/4” mounting bracket
KM231 1” mounting bracket
KM232 1-1/8” mounting bracket
KM233 1-1/4” mounting bracket
KM234 30 mm weight bracket - black
KM235 32 mm weight bracket - black
Azusa Front Spindles
Part No. Description
AE2235 Spindle & Bracket (left hand) #1
AE2236 Spindle & Bracket (right hand) #2
AE8171 Bracket Only
Spindle Bracket and Assembly, 5/8” x 4-1/2”
All prices, terms and availability subject to change without notice.
83|
Aluminum Tie Rod Ends
Part No. Description
KM287 1/2” - Male (Right Hand)
KM288 3/8” - Male (Right Hand)
KM289 3/8” - Male (Left Hand)
Tie rods 3/8” 6-1/2 to 12” in length Left or right hand thread.
Tie Rods
Tie Rod Ends
Part No. Description
KMSPM5 5/16” (Right Hand)
KMSPM5L 5/16” (Left Hand)
KMSPM6 3/8” (Right Hand)
KMSPM6L 3/8” (Left Hand)
KMCM12 1/2” (Right Hand w/Nut)
KMCM8 8 mm (Right Hand)
KMCM8L 8 mm (Left Hand)
Male Ends
Part No. Description
KMSPF5 5/16” (Right Hand)
KMSPF6 3/8” (Right Hand)
Female Ends
Black Only
Jam Nuts
Part No. Description
KM51624RH 5/16” - 24 (Right Hand)
KM51624LH 5/16” - 24 (Left Hand)
KM3824RH 3/8” - 24 (Right Hand)
KM3824LH 3/8” - 24 (Left Hand)
KM8MMRH 8 mm (Right Hand)
KM8MMLH 8 mm (Left Hand) Sold as a 10 Pack
3/8” - 24 Tie RodsPart No. Description
TR365 6-1/2”
TR37 7”
TR375 7-1/2”
TR38 8”
TR385 8-1/2”
TR39 9”
Part No. Description
TR395 9-1/2”
TR310 10”
TR3105 10-1/2”
TR311 11”
TR3115 11-1/2”
TR312 12”
Part No. DescriptionRT5001 Checkerboard - 2” x 45’
RT8014 Non-skid - 2” x 10’
RT8015 Non-skid - 3” x 10’
RT8016 Non-skid - 4” x 10’
Part No. Description
RT2001 Red - 2” x 90’ - Standard duty
RT2002 Blue - 2” x 90’ - Standard duty
RT2003 Yellow - 2” x 90’ - Standard duty
RT2004 Black - 2” x 90’ - Standard duty
RT2005 Silver - 2” x 90’ - Standard duty
RT2006 White - 2” x 90’ - Standard duty
RT2007 Green - 2” x 90’ - Standard duty
RT2008 Orange - 2” x 90’ - Standard duty
RT2010 Purple - 2” x 90’ - Standard duty
RT2012 Chrome - 2” x 90’ - Standard duty
RT2003N Neon Yellow - 2” x 90’ - Standard duty
RT2007N Neon Green - 2” x 90’ - Standard duty
RT2008N Neon Orange - 2” x 90’ - Standard duty
RT2015N Neon Pink - 2” x 90’ - Standard duty
Racer’s Tape
The original ISC Racers Tape. This mult-purpose industrial grade duct tape comes in 10 brillant colors, plus 4 bright fluorescent colors. Tears straight and is easy to apply.
All prices, terms and availability subject to change without notice.
| 84 Steering Shaft AssemblyPart No. Description
AE1868 28” shaft & hub kit
AE8134 Splined steering hub
AE8137 28” shaft only
AE8528 1/2-20 Steering shaft nut
AE8527 1/4-28 slotted nut
AE8555 5/8” lock collar
AE8129 Pitman arm
5/8” Steering Quick Disconnect• Hex type• Weld to 5/8” steering shafts• Aluminum hub
Part No. DescriptionKM501 5/8” Steering Quick Disconnect Hub
Tach Mounts
Part Number Description
GPG1844 3/4” side bar mount for Champ Karts
WB302 Steering wheel mount
Neoprene Steering WheelPart No. Description
AE1805 12” Neoprene Steering Wheel
Part Number Description
SW12 12” lightweight aluminum wheel (Plain)
SW12B 12” lightweight aluminum wheel (Black)
SW14 14” lightweight aluminum wheel (Plain)
SW14B 14” lightweight aluminum wheel (Black)
SW62B 13” open top wheel - (Black)
Aluminum Steering Wheels
Steering Shaft Block & Lock Kit.
Part No. Description
PP110 Steering shaft block & lock kit - 5/8”
PP111 Replacement pin
Fits 3/4” & 5/8” Double Safety Grooves
Part No. Description
LA56600 Steering Quick Disconnect
LongacreSteering Quick Disconnect
All prices, terms and availability subject to change without notice.
85|Inner Throttle Cables
Part No. Description
AE2300 3/16” ball end 1.5 mm dia. - 96” long
AE2301 3/16” ball end 1.5 mm dia. - 54” long
PP851LH 3/16” ball end 1.8 mm dia. - 72” long
PP872 Barrel end 1.8 mm dia. - 72” long
PP880 Barrel end 1.2 mm dia. - 80” longBarrel end Ball end
Bulk Cable Housing
Part No. Description
KM865 6’ nylon cable housing
KMNT25 25’ nylon cable housing
KMNT100 100’ nylon cable housing
KMNT1000 1000’ nylon cable housing
Throttle Cable & Housing
Part No. Description
PP815K 3/16” ball end - 48” long
KMTC92 3/16” ball end - 92” long
KMTC120 3/16” ball end - 10 ft. long
MM100372 3/16” ball end - 72” long
Throttle Fittings
Part No. Description
KMBF Brass fitting
KM905 Brass ferrule (5 per pack)
KM905200 Brass ferrule (200 pack)
Yamaha Cable Housing Anchor
Part No. Description
GPG1360 Cable Anchor Housing
Yamaha Carb Cable Anchor
Part No. Description
GPG1358 Carb Cable Anchor
Cable Stops
Part No. Description
AE2360 Cable stop - 1 per bag
KM932 Cable stop - 4 per bag
PL40 Cable stop - 50 per bag
PP800 Aluminum cable clamp
PP801 Flat Tyle Cable Clamp
All prices, terms and availability subject to change without notice.
| 86Yamaha Throttle SpringPart No. Description
KM994 Throttle Return Spring
Clone Throttle KitPart No. Description
KM194 Clone Throttle Kit
Animal Throttle Kit
Part No. Description
KM609 Animal Throttle Kit
Predator Engine Throttle Kit
Part No. Description
KMPE118 Predator engine throttle kit
Part No. Description
KMPE218 Predator Engine Throttle Kit
Throttle kit & fuel pump mount fits, Predator, Clone & Honda Engines.
Predator Throttle Kit & Fuel Pump Mount
Part No. Description
KMBTK Briggs throttle kit
Briggs Throttle Kit
Part No. Description
KMBTS Briggs throttle spring
Flathead Throttle Spring
Briggs/Tillotson Throttle Kit
Part No. Description
KMBTKT Briggs/Tillotson throttle kit
All prices, terms and availability subject to change without notice.
87|
Throttle Clevis & Spring
Part No. Description
KM50 Throttle clevis & spring
Safety Pins
Part No. Description
KMSP Large safety pin - 1-3/4” long
KMSPS Small safety pin - 1” long
Animal/206 Throttle Linkage & Fuel Pump Mounting Plate
Part No. Description
PP900 Linkage & fuel pump mounting plate
Part No. Description
KMSWP 9” safety wire pliers
LA22598 Safety wire .032 x 50’ stainless steel wire
LA22599 Safety wire .032 x 360’ stainless steel wire
Safety Wire & Pliers
Throttle ClevisPart No. Description
KMTCR Throttle clevis
2-piece Throttle Clevis
Part No. Description
KM191 2- piece throttle clevis
KM192F Female half
KM192M Male half
Wrench Included with each
Universal flywheel screen to fit both the Animal & Clone
Part No. Description
KM612 Animal/Clone flywheel screen
Animal/Clone Flywheel Screen
Sold in quantities of 10, 25 or 50.
All prices, terms and availability subject to change without notice.
| 88
Clear side panel graphic saver kits.
Part No. Description
VK011 Side panel graphic saver kit
Graphic Savers
Each kit contains 16 plastic conical washers, flat washers, button head bolts and lock nuts.
Part No. Description
VK25* Body fastener kit - 16 pcs.
Body Fastener Kit
Animal valve spring tool
Part No. Description
KM600 Animal Spring Tool
Animal Crankshaft Holding Tool
Part No. Description
KM601 Crankshaft Holding Tool
The Crankshaft Holding Tool is designed to assist you with performing a leak down test on your LO206. Test can be completed in top dead cen-ter, bottom dead center, and 7 other positions in between.
Flathead Carb Wrench
Part No. Description
KMCW Carb wrench
Engine Kill Button
Part No. Description
AE1721 Kill button - 36” wire
Starter Nuts
Part No. Description
KM4806 Briggs stater nut (5/8-18)
KM4807 Clone stater nut (M14 x 1.5)
KM4810 Animal stater nut (M16 x 1.5)
Exhaust Springs
Part No. Description
KMES2 2” exhaust spring
KMES3 3” exhaust spring
KMES4 4” exhaust spring
KM864 3-1/2” double loop
All prices, terms and availability subject to change without notice.
89|Racewear 7-piece racing flag set. All flags are professional size (24” x 24”) and are mounted on a 3/4” varnished 3’
Part No. Description
RWF Complete flag set - 7 piece
RWYF Yellow flag
RWBF Black flag
RWRF Red flag
RWGF Green flag
RWWF White flag
RWCKF Checkered flag
RWBUF Blue flag
RWMBF Meatball flag - not included in set
Racing Flags
Plastic Number Panels
7” x 10” flexible plastic number panels.
Part No. Description
ZI7060* Plastic Number Panel
**Specify color when ordering: B = Black, O = Orange, R = Red, W = White & Y = Yellow
9” x 7-1/4” stick-on Number Panels.
Part No. Description
DE100 White stick-on number panel
DE200 Yellow stick-on number panel
Stick-on Number Panels
Stagger Control Containment Strap
Part No. Description
RB96 Rocketboy Containment Strap
Eliminate unwanted tire stretch & carcass damage during bead up. This new tool is intended to lower bead up pressures and is dynamically safer by design than almost all other forms of tire containment devices.
6” stick-on numbers.
Part No. Description
DE*B Black stick-on numbers
DE*W White stick-on numbers
Stick-on Numbers
Sold In Quantities of 10
6” slanted stick-on numbers
Part No. Description
RW*B Black slanted stick-on numbers
RW*W White slanted stick-on numbers
Slanted Stick-on Numbers
Sold In Quantities of 10
All prices, terms and availability subject to change without notice.
| 90 Robic Stopwatches
Part No. Description
RASC1000W Robic Timer
Features:• Event, lap or split timing• 1/100 second precision to 10 hrs.• Two finish time memory recall
Oslo 1000W Dual Stopwatch & Countdown Timer
The best choice in the category — a full 10 hour stopwatch and countdown timer precise to 1/100 second. Assign each person their own color. 20 times more powerful than other brands.
Part No. Description
RASC505 Robic 12 Memory Timer
Features• Lap or split timing• 1/1000 second resolution to 24 hrs.• 12 memory recall• Auto lap counter
SC-505 12 Memory Stopwatch
Ultra precise, multi-mode stopwatch with memory recall & lap counter
Part No. Description
RASC60 Robic 60 Memory Stopwatch
Features:• 60 dual split memory recall• 1/100 second resolution to 10 hrs• Lap counter to 199
Oslo 60 Dual Memory Stopwatch
60 Dual split memory stopwatch with countdown timer & temperature
Part No. Description
RASC899 Robic Triple Timer Stopwatch
Features:• 1, 2 or 3 competitors at once.• Start timers simultaneously or separately• Speed timer in MPH/KPH• Backlight & water resistant
SC-899 Triple Timer
180 Memory stopwatch, 180 memory timer & countdown timer