Tips for Buying

Circular Saw

Saws

A round saw is a terrific device and one of the most common tools in the workshop. It was created in England back in 1780. The circular saw is also referred to as a buzz saw or commonly called the Skil saw, although Skil is a maker that makes circular saws. With the right blade, a circular saw is capable of cutting wood, steel, masonry and ceramic tile. Circular saws can be found in various sizes ranging from 3" to 16". The most typical corded size is 7 1/4" and cordless is 5 3/8" & 6 1/2". There are 2 kinds of circular saws: IN-Line Saws and Worm Drive Saws.

In-Line Saw - These are the most common kinds of circular saws and have the tendency to be the least costly. In addition, they don't weigh as much as the worm drive saws. An In-line saw's motor sits perpendicular to the blade and a shaft runs straight from the motor to drive the blade. An In-Line saw will suit a lot of your applications, and except for changing the blades, they are maintenance free.

Worm Drive Saw - A worm drive is for strong use and has the tendency to cost a little more than the In-Line saws. A worm drive motor is positioned parallel with the blade and makes use of a gear to enhance the torque transferred to the blade. These tend to be a little heavier than the in-line models. Likewise, worm saws are not maintenance free, you will certainly need to periodically include special oil to the motor, which is absolutely nothing more than loosening a screw and adding the oil, it is really simple.

What to look for when buying a circular saw

I would absolutely search for a round saw that accepts 7 1/4 blades. These are the most common blades; for that reason making it much easier to buy blades downs the road. Likewise I would search for a saw with a long cord, as you would marvel the numbers of cords are extremely short. You can always include an extension cord on, however I would try to find a cord that is at least 8 feet in length. Another primary product to try to find is an adjustable base plate. This benefits making angle cuts and sometimes is available in really useful.

Cordless Saws - Cordless saws are nice since they have no cords to plug in, trip over and even punctured. Nevertheless, they lack power. The blades tend to be smaller and therefore they do not cut as fast. Given that it takes a great deal of power to puncture wood, you will certainly need more than one battery as you will be recharging them frequently.

Corded Saws - Corded saws are more effective, however also heavier. If you are going to be cutting a lot of wood, get the corded model as it will save you stress down the road.

I currently own a cordless and corded one. I find myself using both designs practically the very same. It is just easier to get the cordless one and begin cutting. The majority of the carpenters I understand or have actually talked to likewise have both designs.

Saws

Saws

Pointer on using a Circular Saw

Make certain you have the ideal blade for the type of material you are cutting.

Blades - Ensure your blade is sharp and not dull. Dull blades tend to heat up more which triggers more wear on your tools and more chances to bind.

Set the cutting depth no greater than a 1/4 inch thickness of the wood to be cut. This will help reduce the chances of settle back.

Clamp the wood you will be cutting. This will insure a more precise cut. Make certain your wood is clean of nails. Ensure your saw depends on speed prior to you start cutting the wood. Don't require your saw to cut. Let the saw cut by pressing somewhat into the wood and letting the saw cut. See to it the blade stops before you get the wood.

Sources:

Air Compressor Usage Tips

The Green Book (www.thegreenbook.com)http://www.thegreenbook.com/products/saws/