View
97
Download
7
Embed Size (px)
Citation preview
Products Solutions Services
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Technical DatasheetTD 00039E/24/EN/01.13
• Three buttons for local set-up, via ReadWin® 2000 configuration software or FieldCare
•High reproducibility and long-term stability
• Stainless steel housing 316L
Complete product information:www.e-direct.us/ptc_ptp31
Specs at a glance:
•Product: Liquids, vapors and gases
•Accuracy: < 0.5 %•Outputs:
1 or 2 PNP or 1 PNP with 4 to 20 mA
•Display: 4 digit, 14 segments, with color change
•Product temperature: -40 °F to +212 °F (-40 to +100 °C)
•Measuring range - limits: PTC31: 0 to 1.5 psi (100 mbar), 0 to 600 psi (40 bar) PTP31: 0 to 15 psi (1 bar), 0 to 6000 psi (400 bar)
Pressure switch for absolute and gauge pressures
CeraphantTPTC31 / PTP31
$ 304.00
1)
p
2)
CeraphantTPTC31 / PTP31 2
Overview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Application / Function
Application The Ceraphant T is a pressure switch designed for the monitoring and control of absolute and gauge pressures in non-hazardous applications and is available with a wide range of process connections and measuring ranges. You can choose from two kinds of measuring cell technologies:•Up to 600 psi (40 bar) choose
PTC31 with ceramic cell•Up to 6000 psi (400 bar) choose
PTP31 with metallic cell
ApplicationexampleFunction The process pressure acts on the sensor diaphragm and the pressure-dependent change in capacitance of the sensor is measured. A microprocessor evaluates the signal and provides an appropriate output.
1×PNP switch output1) Power supply system2) Load (e.g. programmable logic
controller, process contol system, relay)
CeraphantTPTC31 / PTP31 3
Application / FunctionOverview Dimensions
Electrical connection Price table ContactGo to shop
Technical data
Technicaldata
OutputOutput signal 1 or 2×PNP or 1 PNP with 4 to 20 mAFunction Min., max. windowVoltage drop PNP ≤ 2 VOverload protection Automatic testing of switching current
Power supply Ub
Supply voltage 12 to 30 V DCCurrent consumption Without load < 60 mA, reverse polarity
protection
Performance characteristicsReference conditions According to DIN IEC 60770/61003Measured error < 0.5 %Long-term drift ≤ 0.15 % per yearSensor response time ≤ 20 msAnalog output Non-linearity: ≤ 0.2 % (limit point method)
non-conformity: non-linearity + hysteresis + non-repeatability: ≤ 0.5 % (limit point method)
Operating conditionsMedium temperature -40 to +212 °F (-40 to +100 °C)Ambient temperature -40 to 185 °F (-40 to +85 °C)Storage temperature -40 to 185 °F (-40 to +85 °C)Degree of protection M16×1.5 valve plug: IP 65
M12×1 connector: IP65 (gauge press.), IP66 (absolute press.)Cable: IP 66
Vibration resistance 20 g to DIN 68-2-6 (10-2000 Hz)EMC Interference emission as per EN 61326 class
B electrical equipment, interference immunity as per EN 61326 appendix A (industrial use)
MaterialsProcess connection G ½ A to DIN 16288Housing AISI 316L, with electronically polished
surface Ra ≤ 0.8 µmValve plug Polyamide (PA)M12×1 connector Outside 316LCable outer covering Polyurethane (PUR)
Materials in contact with mediumProcess connection AISI 316LCoupling nut AISI 304Sensor diaphragm PTC31: Ceramic (99,9 % Al2O3)
PTP31: AISI 316LFilling fluid PTC31: dry ceramic measuring cell
PTP31: mineral oilSeals FKM Viton
EPDM (only PTP31)
OperationOperating elements 3 buttons or PC and software
ApprovalsDesina compliantSensors for O2-applications (only PTC31) or with 3.1. certificate on request.
CeraphantTPTC31 / PTP31 4
Application / FunctionOverview Technical data
Price table ContactGo to shopElectrical connection
Dimensions
Dimensions(ininches)
1.54
2.05
2.05
2.05
4.13
0.43
2.56
0.94
0.94
0.94
M16×1.5 connector / ½ NPT valve plugM12 ×1 connector
1.42
AF 27 mm(for 400 bar/6000 psi sensor AF 32 mm)
Ø 1.52
Ø 1.67
Cable 16.4 ft
Installation according to instruction manual.
Housing
Thread ANSI¼ FNPT
Thread ANSI½ MNPT
Thread ANSI¼ FNPT
Process connections PTC31
Process connections PTP31
Thread ANSI½ MNPT
¼ NPT
0.43
0.43
½ NPT
0.99
Ø 0.45
Ø 0.7
Ø 0.84
½ NPT
Ø 0.45
Ø 0.9
0.61
1.34 1.
850.
99
¼ NPTØ 0.45
A1
A2
A3
B
R
2
3
1
4
2
3
1
4
R1
R1
L+
L–
L+
L–R2
2
3
3
1
1
2
4
L+
L–
L+
L–
R14…20 mA
Electricalconnection
DC voltage version with M12×1 connectorA1: 1×PNP switch outputA2: 2×PNP switch outputA3: PNP switch output with additional analog output DC voltage version with valve plug M16×1.5B: 1×PNP switch output DC voltage version with cableA1: 1×PNP switch outputA2: 2×PNP switch outputA3: PNP switch output with additional analog output Cable specification: 5-core (5 × 0.22 mm²);Colors: 1 = brown, 2 = white, 3 = blue, 4 = black, ground = green/yellow
CeraphantTPTC31 / PTP31 5
Application / FunctionOverview Technical data Dimensions
Electrical connection ContactGo to shopPrice table
Pricetable(PTC31)
Ceraphant PTC31: ceramic measuring cell; up to 40 bar Order no. Price/pcs. in USDPower Supply; Output Electrical Connection 1 to 5 6 to 10 11 to 3512-30 V DC; PNP switch 3-wire
Plug M12, IP65 gauge, IP66 absolute PTC31-A1A1 3 1A 370.00 344.00 326.00Valve plug M16 ISO4400, IP65 PTC31-A2A1 3 1A 397.00 369.00 349.00Cable 5 m, IP66 PTC31-A4A1 3 1A 418.00 389.00 368.00
12-30 V DC; 2x PNP switch 4-wire
Plug M12, IP65 gauge, IP66 absolute PTC31-A1B1 3 1A 397.00 369.00 349.00Cable 5 m, IP66 PTC31-A4B1 3 1A 445.00 414.00 392.00
12-30 V DC; PNP switch + 4-20 mA 4-wire
Plug M12, IP65 gauge, IP66 absolute PTC31-A1C1 3 1A 456.00 424.00 401.00Cable 5 m, IP66 PTC31-A4C1 3 1A 504.00 469.00 444.00
Plug and cable to be ordered as ‘accessory’* Please add code for measuring range. ** Please add code for process connection.
Accessories Order no. Price/pcs. in USDM12 socket for plug. 5m cable PVC, Cu Sn/Ni lock. 52010285 13.00Configuration kit for PC-programmable devices. Set-up programme + interface cable for PC with USB-Port.
TXU10-AA 204.00
Socket for plug 4p-125V, 4A-M12 52006263 22.50M12 elbow plug ready for cable, IP67,PG7 51006327 16.00Prices valid until 09.30.2013 in U.S. dollars per unit (not including shipping and applicable sales tax).See Endress+Hauser, Inc. Terms and Conditions of Sale for shipping, tax, and payment terms.
Complete product information:www.e-direct.us/ptc_ptp31
***
Process connections
Code ThreadDA ANSI ¼ FNPT, 316LDD ANSI ½ MNPT, 316L
**
Measuring Range
Code Gauge pressure Overload1C 0… 100 mbar, 0… 10 kPa 4 bar1F 0… 400 mbar, 0… 40 kPa 6 bar1H 0… 1 bar, 0… 100 kPa 10 bar1M 0… 4 bar, 0… 400 kPa 24 bar1P 0… 10 bar, 0… 1 000 kPa 40 bar1S 0… 40 bar, 0… 4 000 kPa 60 bar
Absolute pressure2F 0… 400 mbar, 0… 40 kPa 6 bar2H 0… 1 bar, 0… 100 kPa 10 bar2M 0… 4 bar, 0… 400 kPa 24 bar2P 0… 10 bar, 0… 1 000 kPa 40 bar2S 0… 40 bar, 0… 4 000 kPa 60 bar
*
CeraphantTPTC31 / PTP31 6
Application / FunctionOverview Technical data Dimensions
Electrical connection ContactGo to shopPrice table
Pricetable(PTP31)
Ceraphant PTP31: metallic diaphragm; Viton seal; up to 100 bar Order no. Price/pcs. in USDPower Supply; Output Electrical Connection 1 to 5 6 to 10 11 to 3512-30 V DC; PNP switch 3-wire
Plug M12, IP65 gauge, IP66 absolute PTP31-A1A1 3 1A 345.00 321.00 304.00Valve plug M16 ISO4400, IP65 PTP31-A2A1 3 1A 372.00 346.00 327.00Cable 5 m, IP66 PTP31-A4A1 3 1A 393.00 365.00 346.00
12-30 V DC; 2x PNP switch 4-wire
Plug M12, IP65 gauge, IP66 absolute PTP31-A1B1 3 1A 372.00 346.00 327.00Cable 5 m, IP66 PTP31-A4B1 3 1A 420.00 391.00 370.00
12-30 V DC; PNP switch + 4-20 mA 4-wire
Plug M12, IP65 gauge, IP66 absolute PTP31-A1C1 3 1A 431.00 401.00 379.00Cable 5 m, IP66 PTP31-A4C1 3 1A 479.00 445.00 422.00
Ceraphant PTP31: soldered diaphragm; up to 400 bar Order no. Price/pcs. in USDPower Supply; Output Electrical Connection 1 to 5 6 to 10 11 to 3512-30 V DC; PNP switch 3-wire
Plug M12, IP65 gauge, IP66 absolute PTP31-A1A1 3 7A 345.00 321.00 304.00Valve plug M16 ISO4400, IP65 PTP31-A2A1 3 7A 372.00 346.00 327.00Cable 5 m, IP66 PTP31-A4A1 3 7A 393.00 365.00 346.00
12-30 V DC; 2x PNP switch 4-wire
Plug M12, IP65 gauge, IP66 absolute PTP31-A1B1 3 7A 372.00 346.00 327.00Cable 5 m, IP66 PTP31-A4B1 3 7A 420.00 391.00 370.00
12-30 V DC; PNP switch + 4-20 mA 4-wire
Plug M12, IP65 gauge, IP66 absolute PTP31-A1C1 3 7A 431.00 401.00 379.00Cable 5 m, IP66 PTP31-A4C1 3 7A 479.00 445.00 422.00
Plug and cable to be ordered as ‘accessory’* Please add code for measuring range. ** Please add code for measuring range for 400 bar sensors. *** Please add code for process connection.
Accessories Order no. Price/pcs. in USDM12 socket for plug. 5m cable PVC, Cu Sn/Ni lock. 52010285 344.00Configuration kit for PC-programmable devices. Set-up programme + interface cable for PC with USB-Port.
TXU10-AA 369.00
Socket for plug 4p-125V, 4A-M12 52006263 389.00M12 elbow plug ready for cable, IP67,PG7 51006327 369.00Prices valid until 09.30.2013 in U.S. dollars per unit (not including shipping and applicable sales tax).See Endress+Hauser, Inc. Terms and Conditions of Sale for shipping, tax, and payment terms.
Complete product information:www.e-direct.us/ptc_ptp31
***
***
*
**
Process connections
Code ThreadDA ANSI ¼ FNPT, 316LDD ANSI ½ MNPT, 316L
***
**
MeasuringRangefor 400barsensors 1)
Code Gauge pressure Overload3Z 0...400 bar, 0...40 MPa 600 bar
Absolute pressure4Z 0...400 bar, 0...40 MPa 600 bar
1) welded, without seal
Measuring Range
Code Gauge pressure Overload3H 0… 1 bar, 0… 100 kPa 4 bar 3M 0… 4 bar, 0… 400 kPa 16 bar 3P 0… 10 bar, 0… 1 000 kPa 40 bar 3S 0… 40 bar, 0… 4 000 kPa 160 bar 3U 0… 100 bar, 0… 10 MPa 400 bar
Negative gauge pressure7H -1… +1 bar, -100… +100 kPa 4 bar 7M -1… +4 bar, -100… +400 kPa 16 bar 7P -1… +10 bar, -100… +1 000 kPa 40 bar
Absolute pressure4H 0… 1 bar, 0… 100 kPa 4 bar a 4M 0… 4 bar, 0… 400 kPa 16 bar a 4P 0… 10 bar, 0… 1 000 kPa 40 bar a 4S 0… 40 bar, 0… 4 000 kPa 160 bar a 4U 0… 100 bar, 0… 10 000 kPa 400 bar a
*
Moreproductstocompleteyourmeasuringpoint… PointlevelswitchLiquiphant T FTL20
FlowswitchFlowphant T DTT31
TemperatureswitchThermophant T TTR31
Application / FunctionOverview Technical data Dimensions
Electrical connection Price table ContactGo to shop
Contact
E-directEndress+Hauser, Inc.2350 Endress PlaceGreenwood, IN 46143
Direct order
Internet www.e-direct.usby phone 888- EH-DIRECT
(343-4732)per Fax 317-535-8498E-Mail [email protected]