3
http://www.xenonhidshop.com One Stop Shopping for Hid Xenon Products How to install HID Xenon Conversion Kits in your car by yourself HID conversion kits for car headlamp are made by the most advanced technology - HID. They offer four benefits for a car owner: a. Brighter HID Xenon Lamp is three times the light output of traditional halogen lamp, two times the irradiation distance. b. Safer HID Xenon Lamp provides broader and clearer visual field, removes the dangers of driving in darkness. c. Longer Life Time The life time of HID lamp reaches more than 3000h8 times of traditional halogen lamp. d. Lower Power Consumption HID lights will be environment friendly. Power of normal HID lamp is only 30W or 35W. You will get "cool" lights instead of "hot" lights. Do you know you can install the HID conversion kits by yourself? Follow these picture based step by step instruction, you will get it done in 15 minutes.

How to install HID Xenon Conversion Kits in your car by yourself

Embed Size (px)

Citation preview

Page 1: How to install HID Xenon Conversion Kits in your car by yourself

http://www.xenonhidshop.com One Stop Shopping for Hid Xenon Products

How to install HID Xenon Conversion Kits in your

car by yourself

HID conversion kits for car headlamp

are made by the most advanced

technology - HID. They offer four benefits

for a car owner:

a. Brighter

HID Xenon Lamp is three times the light

output of traditional halogen lamp, two

times the irradiation distance.

b. Safer

HID Xenon Lamp provides broader and clearer visual field, removes the dangers of driving in

darkness.

c. Longer Life Time

The life time of HID lamp reaches more than 3000h,8 times of traditional halogen lamp.

d. Lower Power Consumption

HID lights will be environment friendly. Power of normal HID lamp is only 30W or 35W. You will get

"cool" lights instead of "hot" lights.

Do you know you can install the HID conversion kits by yourself? Follow these picture based step by

step instruction, you will get it done in 15 minutes.

Page 2: How to install HID Xenon Conversion Kits in your car by yourself

Instructions

1. First, open your car hood.

2. Separate the headlamps (both left and right lamps) from your

car after opening your car hood.

3. Open the rear cover of the headlamps and pull the installed

halogen lamp out.

4. Drill a hole in the middle of the rear cover of the headlamp

with a 25mm hold cutter (drill the hole based on actual condition).

Remove the plastic cap of the HID bulb, then put the bulb into the

headlamp unit, make sure the installation of the press spring has settled properly after

installing the lamp.

5. Fix the dustproof cover.

6. Prepare the wiring harness.

7. Connect the wiring harness with the ballast. Connect the source

of electric power and the wiring diagram, stick the ballast on the nearest

place from the headlamp in the engine room firmly by using double-faced

tape, mounting plate, cable tie and etc.

8. Secure the new HID lamp.

Page 3: How to install HID Xenon Conversion Kits in your car by yourself

9. Headlights replaced and ready for test!

10. Enjoy your new light.

Source: http://www.ehow.com/how_5215364_install-conversion-kits-car-yourself.html

http://www.xenonhidshop.com One Stop Shopping for Hid Xenon Products