Fiberon Itemized Product Guide

PRODUCT ITEMIZED

G U I D E

Table of Contents

Decking Products

Deck Fasteners and Accessories

Composite Railing Products

Deck and Rail Lighting Products

Warranty Information

ADA Handrail System

Care and Maintenance

Paramount

Phantom Hidden Fasteners

Symmetry

Rail Lighting Options

Stain and Fade Performance Limited Warranty

ADA Handrail System Components

Fiberon Care and Maintenance

ProTect Advantage FR (select markets only)

ProTect Advantage

Cortex Fastening System

Good Life

Lighting Accessories

Commercial Limited Warranty

Horizon

Horizon Symmetry Collection

Ballistic NailScrew Driver

Horizon

Deck Lighting Options

Residential Limited Warranty

Good Life

Sanctuary (select markets only)

3

17

21

39

61

43

47

11

9

18

33

41

56

5

7

17

27

40

51

13

14

DECKINGP R O D U C T S

Paramount PVC Decking

Grooved Profile: Square Edge Profile:

• Lightweight, easy-to-handle boards• No organic compounds to promote mold growth• Resists moisture, dents, and flames• Meets/exceeds OSHA and ADA slip-resistance guidelines• Low maintenance

Reversible: No

Material: Polyvinyl chloride (PVC) alloy outer surface is co-extruded on three sides with a cellular PVC core

Warranty: Lifetime Limited Performance

Item Description Color Color Pattern Dimensions Length Pcs / Unit Item Number

Grooved Deck Board Brownstone Multi-Chromatic 5.5 in. x 1 in. 12 ft. 56 CPBRDG BROWNSTONE 12

Grooved Deck Board Sandstone Multi-Chromatic 5.5 in. x 1 in. 12 ft. 56 CPBRDG SANDSTONE 12

Grooved Deck Board Flagstone Multi-Chromatic 5.5 in. x 1 in. 12 ft. 56 CPBRDG FLAGSTONE 12

Grooved Deck Board Earthstone Multi-Chromatic 5.5 in. x 1 in. 12 ft. 56 CPBRDG EARTHSTONE 12

Grooved Deck Board Fossil Solid 5.5 in. x 1 in. 12 ft. 56 CPBRDG FOSSIL 12

Grooved Deck Board Mineral Solid 5.5 in. x 1 in. 12 ft. 56 CPBRDG MINERAL 12













Square Edge Deck Board Brownstone Multi-Chromatic 5.5 in. x 1 in. 20 ft. 56 CPBRD BROWNSTONE 20

Square Edge Deck Board Sandstone Multi-Chromatic 5.5 in. x 1 in. 20 ft. 56 CPBRD SANDSTONE 20

Square Edge Deck Board Flagstone Multi-Chromatic 5.5 in. x 1 in. 20 ft. 56 CPBRD FLAGSTONE 20

Square Edge Deck Board Earthstone Multi-Chromatic 5.5 in. x 1 in. 20 ft. 56 CPBRD EARTHSTONE 20

Square Edge Deck Board Fossil Solid 5.5 in. x 1 in. 20 ft. 56 CPBRD FOSSIL 20

Square Edge Deck Board Mineral Solid 5.5 in. x 1 in. 20 ft. 56 CPBRD MINERAL 20

12 ft. and 16 ft. Square Edge Deck Boards for Special Order Only





Square Edge Deck Board Fossil Solid 5.5 in. x 1 in. 12 ft. 56 CPBRD FOSSIL 12






Square Edge Deck Board Fossil Solid 5.5 in. x 1 in. 16 ft. 56 CPBRD FOSSIL16


3 For the most up-to-date information, visit fiberondecking.com.

Paramount Fascia

4For the most up-to-date information, visit fiberondecking.com.

Fascia Profile:

Reversible: No

Material: Polyvinyl chloride (PVC) alloy outer surface is co-extruded on three sides with a cellular PVC core

Warranty: Lifetime Limited Performance


Fascia Board Brown Solid .5 in. x 11.75 in. 12 ft. 24 CPFAS BROWN 12

Fascia Board Sand Solid .5 in. x 11.75 in. 12 ft. 24 CPFAS SAND 12

Fascia Board Earth Solid .5 in. x 11.75 in. 12 ft. 24 CPFAS EARTH 12

Fascia Board Fossil Solid .5 in. x 11.75 in. 12 ft. 24 CPFAS FOSSIL 12

Fascia Board Mineral Solid .5 in. x 11.75 in. 12 ft. 24 CPFAS MIN FLGSTN 12

5

Horizon Composite Decking


• Striking looks emulate exotic, tropical hardwoods• Reversible boards offer polished appearance on top and bottom• PermaTech® surface material resists staining, fading, mold, mildew, and decay• Cleans easily; no refinishing needed

Reversible: Yes

Material: Durable PermaTech outer surface is co-extruded on four sides with a wood and polyethylene (PE) composite core

Warranty: 25-year Stain and Fade; 25-year Limited Performance


Grooved Deck Board Ipe Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDTHG IPE 12

Grooved Deck Board Rosewood Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDTHG ROS 12

Grooved Deck Board Tudor Brown Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDTHG TUDOR 12

Grooved Deck Board Castle Gray Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDTHG CSGRAY 12

Grooved Deck Board Greystone Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDTHG GRYSTN 12











Square Edge Deck Board Ipe Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDTH IPE 20

Square Edge Deck Board Rosewood Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDTH ROS 20

Square Edge Deck Board Tudor Brown Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDTH TUDOR 20

Square Edge Deck Board Castle Gray Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDTH CSGRAY 20

Square Edge Deck Board Greystone Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDTH GRYSTN 20










For the most up-to-date information, visit fiberondecking.com.

6

Riser Profile:

Reversible: No

Material: Durable PermaTech outer surface is co-extruded on three sides with a wood and polyethylene (PE) composite core



Riser Board Ipe Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS IPE 12

Riser Board Rosewood Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS ROS 12

Riser Board Tudor Brown Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS TUDOR 12

Riser Board Castle Gray Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS CSGRAY 12

Riser Board Greystone Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS GRYSTN 12

Horizon Riser

Horizon Fascia

Fascia Profile:

Reversible: No




Fascia Board Ipe Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS IPE 12

Fascia Board Rosewood Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS ROS 12

Fascia Board Tudor Brown Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS TUDOR 12

Fascia Board Castle Gray Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS CSGRAY 12

Fascia Board Greystone Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS GRYSTN 12


Horizon Symmetry Collection Composite Decking


• Low-gloss formulation and micro-texturing creates beautiful matte finish• Rich, earthy colors and unique wood grain patterns enhance visual appeal• Four-sided PermaTech protection ensures durability• Same pattern on top and bottom extends versatility• Pairs with Symmetry Railing for an elegant outdoor space

Reversible: Yes

Material: Durable PermaTech outer surface is co-extruded on four sides with a wood and polyethylene (PE) composite core



Grooved Deck Board Burnt Umber Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDSYMG BRU 12

Grooved Deck Board Warm Sienna Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDSYMG WMS 12

Grooved Deck Board Cinnabar Multi-Chromatic 5.4 in. x .935 in. 12 ft. 56 BRDSYMG CNB 12







Square Edge Deck Board Burnt Umber Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDSYM BRU 20

Square Edge Deck Board Warm Sienna Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDSYM WMS 20

Square Edge Deck Board Cinnabar Multi-Chromatic 5.4 in. x .935 in. 20 ft. 56 BRDSYM CNB 20









Riser Profile:

Reversible: No




Riser Board Burnt Umber Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS BURNT UMBER 12

Riser Board Warm Sienna Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS WARM SIENNA 12

Riser Board Cinnabar Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS CINNABAR 12

Fascia Profile:

Reversible: No




Fascia Board Burnt Umber Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS BURNT UMBER 12

Fascia Board Warm Sienna Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS WARM SIENNA 12

Fascia Board Cinnabar Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS CINNABAR 12

Horizon Symmetry Collection Riser

Horizon Symmetry Collection Fascia


ProTect Advantage Composite Decking


• Elegant look of natural hardwoods• Multichromatic colors with realistic wood grain patterns• Three-sided PermaTech surface protection resists staining, fading, insects, and decay• Composite construction ensures easy maintenance, lasting durability

Reversible: No




Grooved Deck Board Chestnut Multi-Chromatic 5.3 in. x .93 in. 12 ft. 56 BRDPRTFG CN 12

Grooved Deck Board Western Cedar Multi-Chromatic 5.3 in. x .93 in. 12 ft. 56 BRDPRTFG WC 12

Grooved Deck Board Gray Birch Multi-Chromatic 5.3 in. x .93 in. 12 ft. 56 BRDPRTFG GB 12







Square Edge Deck Board Chestnut Multi-Chromatic 5.3 in. x .93 in. 20 ft. 56 BRDPRTF CN 20

Square Edge Deck Board Western Cedar Multi-Chromatic 5.3 in. x .93 in. 20 ft. 56 BRDPRTF WC 20

Square Edge Deck Board Gray Birch Multi-Chromatic 5.3 in. x .93 in. 20 ft. 56 BRDPRTF GB 20









10

ProTect Advantage Fascia

Riser Profile:

Reversible: No




Riser Board Chestnut Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS CHESTNUT 12

Riser Board Western Cedar Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS WESTERN CDR 12

Riser Board Gray Birch Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS GRAY BIRCH 12

ProTect Advantage Riser

Fascia Profile:

Reversible: No




Fascia Board Chestnut Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS CHESTNUT 12

Fascia Board Western Cedar Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS WESTERN CDR 12

Fascia Board Gray Birch Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS GRAY BIRCH 12


ProTect Advantage FR Composite Decking


• Approved for use in Wildland Urban Interface (WUI) zones• Elegant look of natural hardwoods in three multi-chromatic colors• Three-sided PermaTech surface protection resists staining, fading, insects, and decay• Composite construction ensures easy maintenance, lasting durability

Reversible: No




Grooved Deck Board Chestnut Multi-Chromatic 5.3 in. x .93 in. 12 ft. 56 BRDPRTFFRG CN 12

Grooved Deck Board Western Cedar Multi-Chromatic 5.3 in. x .93 in. 12 ft. 56 BRDPRTFFRG WC 12

Grooved Deck Board Gray Birch Multi-Chromatic 5.3 in. x .93 in. 12 ft. 56 BRDPRTFFRG GB 12







Square Edge Deck Board Chestnut Multi-Chromatic 5.3 in. x .93 in. 20 ft. 56 BRDPRTFFR CN 20

Square Edge Deck Board Western Cedar Multi-Chromatic 5.3 in. x .93 in. 20 ft. 56 BRDPRTFFR WC 20

Square Edge Deck Board Gray Birch Multi-Chromatic 5.3 in. x .93 in. 20 ft. 56 BRDPRTFFR GB 20


Available in select markets only. Special order direct from Meridian, Idaho

12

ProTect Advantage Fascia

Matching ProTect Advantage fascia and risers are not fire-rated.

Riser Profile:

Reversible: No




Riser Board Chestnut Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS CHESTNUT 12

Riser Board Western Cedar Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS WESTERN CDR 12

Riser Board Gray Birch Multi-Chromatic .75 in. x 7.25 in. 12 ft. 48 HCRIS GRAY BIRCH 12

ProTect Advantage Riser

Fascia Profile:

Reversible: No




Fascia Board Chestnut Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS CHESTNUT 12

Fascia Board Western Cedar Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS WESTERN CDR 12

Fascia Board Gray Birch Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS GRAY BIRCH 12


Good Life Composite Decking


• Delivers exceptional value, unbeatable durability• Prefinished with a protective surface on three sides• Resists mold and mildew • Won’t rot, warp, or splinter like wood• Easy to maintain; no costly refinishing

Reversible: No

Material: Durable polyethylene (PE) outer surface is co-extruded on three sides with a wood and PE composite core



Grooved Deck Board Cabin Solid 5.25 in. x .93 in. 12 ft. 56 BRDGDLG CB 12

Grooved Deck Board Villa Solid 5.25 in. x .93 in. 12 ft. 56 BRDGDLG VL 12

Grooved Deck Board Cottage Solid 5.25 in. x .93 in. 12 ft. 56 BRDGDLG CT 12







Square Edge Deck Board Cabin Solid 5.25 in. x .93 in. 20 ft. 56 BRDGDL CB 20

Square Edge Deck Board Villa Solid 5.25 in. x .93 in. 20 ft. 56 BRDGDL VL 20

Square Edge Deck Board Cottage Solid 5.25 in. x .93 in. 20 ft. 56 BRDGDL CT 20








Good Life FasciaFascia Profile:

Reversible: No

Material: Durable polyethylene (PE) outer surface is co-extruded on three sides with wood and PE composite core



Fascia Board Cabin Solid .75 in. x 11.25 in. 12 ft. 24 HCFAS CB 12

Fascia Board Villa Solid .75 in. x 11.25 in. 12 ft. 24 HCFAS VL 12

Fascia Board Cottage Solid .75 in. x 11.25 in. 12 ft. 24 HCFAS CT 12


Fascia Profile:

Reversible: No




Fascia Board Espresso Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS ESPRESSO 12

Fascia Board Earl Grey Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS EARL GREY 12

Fascia Board Latte Multi-Chromatic .75 in. x 11.25 in. 12 ft. 24 HCFAS LATTE 12

Sanctuary Composite Decking Available in select markets only.

Sanctuary Fascia


• Three multi-chromatic colors look like natural wood• High-traction grain pattern ensures solid footing• Three-sided PermaTech protection offers outstanding surface durability• Never needs sanding, staining, or refinishing

Reversible: No




Grooved Deck Board Espresso Multi-Chromatic 5.25 in. x .925 in. 12 ft. 56 BRDSANG ESPRESSO 12

Grooved Deck Board Earl Grey Multi-Chromatic 5.25 in. x .925 in. 12 ft. 56 BRDSANG EARL GREY 12

Grooved Deck Board Latte Multi-Chromatic 5.25 in. x .925 in. 12 ft. 56 BRDSANG LATTE 12







Square Edge Deck Board Espresso Multi-Chromatic 5.25 in. x .925 in. 16 ft. 56 BRDSAN ESPRESSO 16

Square Edge Deck Board Earl Grey Multi-Chromatic 5.25 in. x .925 in. 16 ft. 56 BRDSAN EARL GREY 16

Square Edge Deck Board Latte Multi-Chromatic 5.25 in. x .925 in. 16 ft. 56 BRDSAN LATTE 16


For the most up-to-date information, visit fiberondecking.com. 15

DECK FASTENERSA N D A C C E S S O R I E S

• Installs up to 50% faster• Driver Attachment easily snaps onto the Ballistic NailScrew Driver, allowing screws to be driven into place with the pull of the trigger • Fasteners install like nails, but can be removed easily like screws• Driver Kit includes swivel hose fitting, belt hook, safety glasses, allen wrench, oil, driver attachment, and balistic nailscrew driver• Tub contains 900 fasteners (800 line fasteners, 100 butt joint fasteners), 950 nailscrews, 1 drive attachment, and 2 drive bits

Item Description Color Coverage Count Pkgs / MC Item Number

Ballistic NailScrew Driver Kit N/A N/A 1 1 BKT BRD FIB GUN

Ballistic NailScrew Driver Attachment N/A N/A 1 1 BKT BRD FIB GUN ATCH

900 count Ballistic Screws Black 500 sq. ft. 900 2 BKT BRD FIB GUN C900

Phantom Hidden Fasteners


• Smart design enables faster installation• Allows one fastener per butt joint• Gripper feet bite into joist; spacer tabs create consistent spacing• Keyhole design properly orients and seats the screw for optimal installation• Corrosion-resistant • All packages includes clips, screws, and driver bit

Item Description Color Coverage Count Pkgs / MC Item Number

Phantom GT Line/Butt Fasteners Black 50 sq. ft. 90 20 BKT BRD PHTM GT B90

Phantom GT End Clip Fastener Black 25 lf. 25 12 BKT BRD FIB SRT/STP

Phantom GT Bucket Black 500 sq. ft. 900 2 BKT BRD FIBERON C900

Phantom 20 EC Black 25 lf. 25 12 BKT BRD PHTM20EC B90

GT End Clip Fastener

20 End Clip Fastener

900 ct. Ballistic NailScrew Tub

GT Butt Joint Fastener

GT Line Fastener



The Fiberon Cortex Fastening System is a hidden deck board face-fastening system that blends seamlessly with the color of your deck.

Box contents will cover 100 l/f for 12 in. on-center joist installation or 140 l/f for 16 in. on-center joist installation. Each box includes 224 screws, 300 color-match plugs, and two setting tools.

Bucket quantities are available for Paramount decking only. Contents will cover 300 sq. ft. of decking. Each bucket contains 1,050 screws, 1,200 color-match plugs, and six setting tools.

Material: Powder-coated stainless steel

Item Description Color Coverage Pcs/ Pkg Pkgs / MC Item Number

2.5 in. Screws Burnt Umber 100 lin. ft. 224 6 SCREW FIB SS BRU

2.5 in. Screws Cinnabar 100 lin. ft. 224 6 SCREW FIB SS CNB

2.5 in. Screws Warm Sienna 100 lin. ft. 224 6 SCREW FIB SS WMS

2.5 in. Screws Ipe 100 lin. ft. 224 6 SCREW FIB SS IPE

2.5 in. Screws Rosewood 100 lin. ft. 224 6 SCREW FIB SS ROS

2.5 in. Screws Tudor Brown 100 lin. ft. 224 6 SCREW FIB SS TUDOR

2.5 in. Screws Greystone 100 lin. ft. 224 6 SCREW FIB SS GRYSTN

2.5 in. Screws Castle Gray 100 lin. ft. 224 6 SCREW FIB SS CSGRY

2.5 in. Screws Western Cedar 100 lin. ft. 224 6 SCREW FIB SS WC

2.5 in. Screws Gray Birch 100 lin. ft. 224 6 SCREW FIB SS GB

2.5 in. Screws Brownstone 100 lin. ft. 224 6 SCREW FIB SS BROWNST

2.5 in. Screws Sandstone 100 lin. ft. 224 6 SCREW FIB SS SANDSTN

2.5 in. Screws Flagstone 100 lin. ft. 224 6 SCREW FIB SS FLAGSTN

2.5 in. Screws Earthstone 100 lin. ft. 224 6 SCREW FIB SS EARTHST

2.5 in. Screws Mineral 100 lin. ft. 224 6 SCREW FIB SS MINERAL

2.5 in. Screws Fossil 100 lin. ft. 224 6 SCREW FIB SS FOSSIL

2.5 in. Screws Brownstone 300 sq. ft. 1050 1 SCREW FIB SS3 BROWN

2.5 in. Screws Sandstone 300 sq. ft. 1050 1 SCREW FIB SS3 SAND

2.5 in. Screws Flagstone 300 sq. ft.. 1050 1 SCREW FIB SS3 FLAG

2.5 in. Screws Earthstone 300 sq. ft. 1050 1 SCREW FIB SS3 EARTH

2.5 in. Screws Mineral 300 sq. ft. 1050 1 SCREW FIB SS3 MIN

2.5 in. Screws Fossil 300 sq. ft. 1050 1 SCREW FIB SS3 FOS

Fiberon Cortex Fastening System


RAILINGP R O D U C T S

Symmetry Composite Railing

Symmetry Railing Components

Top Rail Dimensions: 3 in. x 3.06 in.

Bottom Rail Dimensions: 2.56 in. x 2.07 in.

• Satin finish adds elegance; composite construction ensures lasting durability • Reinforced top rail provides strong, sturdy feel• Longer rail spans (up to 12 ft.) enable better sight lines• Hidden hardware keeps the look clean• Works with round, aluminum balusters; cable rail; acrylic panels

Material: Premium quality composite with permanent PVC surface.

Warranties: 25-year Residential Limited Performance; 5-year Commercial Limited Performance


Note: Rail lengths will vary slightly due to manufacturing processes. Make sure rails are cut to correct length, and with hole pattern centered between posts before securing.

Maximum length between post sleeves: 6 ft. Rail = 67 in. 8 ft. Rail = 91 in.

10 ft. Rail = 115 in. 12 ft. Rail = 139 in.

Post SleeveCap

Top Rail Bracket Top Rail Top H-Channel

Bottom RailBottom U-ChannelBottom Rail Bracket

Post Sleeve

Post Sleeve Base Moulding

Crush Blocks

SquareBalusters

Rail kits include top rail, bottom rail, H-channel, U-channel (if necessary), crush blocks, and hardware. Posts and infills sold separately.

Item Description Color Rail Height Length Unit / Pallet Item Number

Line/Stair Kit Tranquil White N/A 6 ft. 36 RL KIT S 6 LN/ST WH

Line/Stair Kit Serene Black N/A 6 ft. 36 RL KIT S 6 LN/ST BL

Line/Stair Kit Simply Brown N/A 6 ft. 36 RL KIT S 6 LN/ST BR










Includes top rail, bottom rail, H-channel, beveled balusters with screws, crush blocks, and line/stair hardware pack. Posts sold separately.


Line/Stair Section Tranquil White 36 in. 6 ft. 36 SEC S W 6KD 29.5SB

Line/Stair Section Tranquil White 36 in. 8 ft. 36 SEC S W 8KD 29.5SB

Unrouted rail kits are for use with alternative infill systems, including cable rail or acrylic panels. Unrouted rail kits include unrouted top and bottom rail, H-channel, crush blocks, and hardware. Posts and infills sold separately.


Line/Stair Kit Tranquil White N/A 8 ft. 36 RL KIT S 8 L/S UN WH

Line/Stair Kit Serene Black N/A 8 ft. 36 RL KIT S 8 L/S UN BL

Line/Stair Kit Simply Brown N/A 8 ft. 36 RL KIT S 8 L/S UN BR

Symmetry Rail Kits

Symmetry Rail Sections with Beveled Composite Balusters

Symmetry Rail Kits UNROUTED


Bottom U-channel included in 10 ft. and 12 ft. kits only


1.25 in. x 1.25 in. square solid cellular PVC balusters. Exclusively for Symmetry Railing (all colors). Features a matte finish.

Item Description Color Rail Height Length Pcs/Unit Item Number

Beveled Baluster Tranquil White 36 in. 29.5 in. 21 BALS BV 29.5 KIT WH

Beveled Baluster Serene Black 36 in. 29.5 in. 21 BALS BV 29.5 KIT BL

Beveled Baluster Simply Brown 36 in. 29.5 in. 21 BALS BV 29.5 KIT BR

Beveled Baluster Tranquil White 42 in. 35.5 in. 21 BALS BV 35.5 KIT WH

Beveled Baluster Serene Black 42 in. 35.5 in. 21 BALS BV 35.5 KIT BL

Beveled Baluster Simply Brown 42 in. 35.5 in. 21 BALS BV 35.5 KIT BR

Symmetry Railing Infill Options

Symmetry Beveled Composite Balusters

Fiberon railing systems are compatible with different infill options. Consult applicable building codes to ensure that the infill selected will result in a railing that meets height requirements.

.75 in. round aluminum balusters work with Symmetry railing. Stair baluster kits include stair top rail adapters.


Round Aluminum Balusters Black 36 in. 29.5 in. 20 BAL RD 29.5 LKS BL

Round Aluminum Balusters Black 42 in. 35.5 in. 20 BAL RD 35.5 LKS BL

Round Aluminum Balusters with Stair Adapters Black 36 in. 30 in. 20 BAL RD 30 SKS BL

Round Aluminum Balusters with Stair Adapters Black 42 in. 36 in. 20 BAL RD 36 SKS BL

Symmetry Black Round Aluminum Balusters

Symmetry Round Baluster Stair Adapters

Round baluster adapters fit all round Symmetry aluminum balusters.

Item Description Color Rail Height Pcs / Pkg Pkg/MC Item Number

Stair Baluster Adapters Black Up to 42 in. 20 36 BAL15 AD STR 20 PK

CVS includes pre-drilled aluminum channels, panel tracks, and hardware package. The clear vision system is designed to be installed on decks 3 ft. or less from the ground.


CVS Line Infill Kit White 36 in. 6 ft. 1 RL12 KIT 6 CVS WHT C

CVS Line Infill Kit Black 36 in. 6 ft. 1 RL12 KIT 6 CVS BLK C

28.5 in. x 65 in. Acrylic Panel Clear 36 in. 6 ft. 1 ACRYLIC SHEET CLR C

Clear Vision System (CVS)


Symmetry hidden hardware works exclusively with Symmetry Railing system.

Item Description Color Rail Height Pcs/Pkg Pkg/MC Item Number

Line/Stair Hardware Black Up to 42 in. N/A 18 BKT SYM LN/ST HW

Symmetry Hidden Hardware Brackets

Line Brackets

Stair Brackets

Available in all Symmetry Railing colors. Features a matte finish. Fits over 5 in. x 5 in. Symmetry beveled post sleeves.


Pyramid Tranquil White N/A 1 6 CAP PYRAMID 5 WH

Pyramid Serene Black N/A 1 6 CAP PYRAMID 5 BL

Pyramid Simply Brown N/A 1 6 CAP PYRAMID 5 BR

Symmetry 5 in. x 5 in. Post Sleeve Caps

Symmetry 5 in. x 5 in. Post Sleeve Base Moulding

Symmetry Caps and Moulding

Available in all Symmetry Railing colors. Features a matte finish. Fits over 5 in. x 5 in. Symmetry beveled post sleeves.


Base Moulding Tranquil White N/A 1 8 POST SL MLDG 5 WH

Base Moulding Serene Black N/A 1 8 POST SL MLDG 5 BL

Base Moulding Simply Brown N/A 1 8 POST SL MLDG 5 BR

Available in all Symmetry Railing colors; features a matte finish. Fits over a 4 in. x 4 in. wood post.

Item Description Color Rail Height Length Units/Pallet Item Number

5 in. x 5 in. Beveled Tranquil White up to 36 in. 39 in. 40 POST SL CMP 5X39 WH

5 in. x 5 in. Beveled Serene Black up to 36 in. 39 in. 40 POST SL CMP 5X39 BL

5 in. x 5 in. Beveled Simply Brown up to 36 in. 39 in. 40 POST SL CMP 5X39 BR

5 in. x 5 in. Beveled Tranquil White up to 42 in. 45 in. 42 POST SL CMP 5X45 WH

5 in. x 5 in. Beveled Serene Black up to 42 in. 45 in. 42 POST SL CMP 5X45 BL

5 in. x 5 in. Beveled Simply Brown up to 42 in. 45 in. 42 POST SL CMP 5X45 BR

5 in. x 5 in. Beveled Tranquil White All 108 in. 40 POST SL CMP 5X108 WH

5 in. x 5 in. Beveled Serene Black All 108 in. 40 POST SL CMP 5X108 BL

5 in. x 5 in. Beveled Simply Brown All 108 in. 40 POST SL CMP 5X108 BR

Symmetry 5 in. x 5 in. Beveled Composite Post Sleeves

Post Sleeve Surface Mount

Post sleeve surface mount includes the metal mount bracket and 4 in. x 4 in. wood insert.

Item Description Color Rail Height Length Units / Pallet Item Number

4 in. x 4 in. mount Up to 42 in. 48 in. 24 BKT2 SLV MT WD KIT C



Horizon Composite Railing

Horizon Railing Components

Top Rail Dimensions: 3.75 in. x 2.25 in.

Bottom Rail Dimensions: 3.5 in. x 1.75 in.

• Drink-friendly flat top rail is ideal for entertaining• Permanent bonded finish protects against moisture, stains, and UV rays• Pre-routed dagger system reduces baluster installation time• Three infill options: square composite balusters; round metal balusters; ClearVisionSystem panels

Material: Composite core with a durable PVC coating

Warranties: 20-year Residential Limited Performance; 5-year Commercial Limited Performance

NOTE: Rail lengths will vary slightly due to manufacturing processes. Make sure rails are cut to correct

length, and with hole pattern centered between posts before securing.

Post SleeveCap Top Rail Bracket

Top Rail

Bottom Rail

SquareBalusters

Bottom Rail Bracket

Post Sleeve


Adjustable Crush Block



Horizon Rail Sections with matching Square Composite Balusters

Horizon Rail Kits

Horizon Rail Sections with Black Round Metal Balusters


Horizon rail kits include top and bottom rails, bottom rail support channel, line or stair hardware, and square baluster inserts. Posts and infill sold separately. Line kits include adjustable crush blocks.


Line Kit Bronze N/A 6 ft. 30 RL16 KIT M 6 LN BZ

Line Kit Black N/A 6 ft. 30 RL16 KIT M 6 LN BL

Line Kit Dark Walnut N/A 6 ft. 30 RL16 KIT M 6 LN DW

Line Kit Bronze N/A 8 ft. 30 RL16 KIT M 8 LN BZ

Line Kit Black N/A 8 ft. 30 RL16 KIT M 8 LN BL

Line Kit Dark Walnut N/A 8 ft. 30 RL16 KIT M 8 LN DW

Stair Kit Bronze N/A 6 ft. 30 RL16 KIT2 M 6ST BZ

Stair Kit Black N/A 6 ft. 30 RL16 KIT2 M 6ST BL

Stair Kit Dark Walnut N/A 6 ft. 30 RL16 KIT2 M 6ST DW

Rail sections include top and bottom rails, hardware, black round metal balusters, and baluster inserts. Posts sold separately.


Line Section White 36 in. 6 ft. 30 SEC15 M W 6KD 29.5MB




Stair Section White 42 in. 6 ft. 30 SEC15 MSW 6KD 35.5MB

Stair Section White 42 in. 8 ft. 30 SEC15 MSW 8KD 35.5MB

Rail sections include top and bottom rails, hardware, square composite balusters, and baluster inserts. Posts sold separately.


Line Section White 36 in. 6 ft. 30 SEC15 M W 6KD 29.5CB




Stair Section White 42 in. 6 ft. 30 SEC15 MSW 6KD 35.5CB

Stair Section White 42 in. 8 ft. 30 SEC15 MSW 8KD 35.5CB

1.25 in. x 1.25 in. square composite balusters. Designed for Horizon Railing. Baluster inserts sold separately.

Item Description Color Rail Height Length Pcs / Unit Item Number

Square Baluster White 36 in. 29.5 in. 21 BAL SQ 29.5 KIT WH C

Square Baluster Bronze 36 in. 29.5 in. 21 BAL SQ 29.5 KIT BZ C

Square Baluster Black 36 in. 29.5 in. 21 BAL SQ 29.5 KIT BL C

Square Baluster Dark Walnut 36 in. 29.5 in. 21 BAL SQ 29.5 KIT DW C

Square Baluster White 42 in. 35.5 in. 21 BAL SQ 35.5 KIT WH C

Square Baluster Bronze 42 in. 35.5 in. 21 BAL SQ 35.5 KIT BZ C

Square Baluster Black 42 in. 35.5 in. 21 BAL SQ 35.5 KIT BL C

Square Baluster Dark Walnut 42 in. 35.5 in. 21 BAL SQ 35.5 KIT BW C

The ClearVisionSystem (CVS) includes pre-drilled aluminum channels, panel tracks, and hardware package. This system is designed to be installed on decks 3 ft. or less from the ground.


CVS Line Infill Kit White 36 in. 6 ft. 1 RL12 KIT 6 CVS WHT C

CVS Line Infill Kit Black 36 in. 6 ft. 1 RL12 KIT 6 CVS BLK C

28.5 in. x 65 in. Acrylic Panel Clear 36 in. 6 ft. 1 ACRYLIC SHEET CLR C

Railing Infill Options

Clear Vision System (CVS)

Horizon Square Composite Balusters

Fiberon railing systems work with different infill options. Consult applicable building codes to ensure that the infill selected will result in a railing that meets height requirements.

Black, round metal balusters, .75 in. diameter. Designed for Horizon Railing. Baluster inserts included.


Line Inserts Black 36 in. 29.5 in. 5 BAL RD 29.5 LKH BL C

Line Inserts Black 42 in. 35.5 in. 5 BAL RD 35.5 LKH BL C

Stair Inserts Black 36 in. 35.5 in. 5 BAL RD 35.5 SKH BL C

Horizon Round Metal Balusters


Horizon Round Metal Baluster Inserts

Horizon Square Baluster Inserts

Baluster Inserts and Screws

Square baluster inserts fit all Horizon square composite balusters.

Item Description Color Rail Height Pcs / Pkg Pkg / MC Item Number

Line Baluster Inserts White 36 in. - 42 in. 30 36 BAL14 INS LN 30 PK W

Line Baluster Inserts Black 36 in. - 42 in. 30 36 BAL14 INS LN 30 PK B

Stair Baluster Inserts White 36 in. - 42 in. 24 36 BAL14 INS ST 24 PK W

Stair Baluster Inserts Black 36 in. - 42 in. 24 36 BAL14 INS ST 24 PK B

Round metal baluster inserts work with the Horizon railing system and fit .75 in. round metal balusters.

Item Description Color Rail Height Pcs / Pkg Pkg / MC Item Number

Line Insert Black 36 in. - 42 in. 210 4 BAL INS MTL LINE C

Stair Insert Black 36 in. - 42 in. 96 4 BAL INS MTL STAIR C

Line Insert

Line InsertStair Insert

Marine grade hardware is available in white only.

Item Description Color Rail Height Pcs/Pkg Pkg / MC Item Number

Line White 36 in. - 42 in. 1 18 BKT14 LN HW 4PK WH

Line Bronze 36 in. - 42 in. 1 18 BKT14 LN HW 4PK BZ

Line Black 36 in. - 42 in. 1 18 BKT14 LN HW 4PK BL

Line Dark Walnut 36 in. - 42 in. 1 18 BKT14 LN HW 4PK DW

Line Marine Grade White 36 in. - 42 in. 1 18 BKT LINE 4PK W MG C

Stair White 36 in. - 42 in. 1 12 BKT9 STR 4PK W C

Stair Bronze 36 in. - 42 in. 1 12 BKT7 STAIR 4PK BZ C

Stair Black 36 in. - 42 in. 1 12 BKT10 STR 4PK BL C

Stair Dark Walnut 36 in. - 42 in. 1 12 BKT STAIR HW 4PK DWC

Stair Marine Grade White 36 in. - 42 in. 1 12 BKT STAIR 4PK W MG C

Angle White 36 in. - 42 in. 1 24 BKT ANGLE 4PK W C

Angle Bronze 36 in. - 42 in. 1 24 BKT ANGLE 4PK BZ C

Angle Black 36 in. - 42 in. 1 24 BKT ANGLE 4PK BL C

Angle Dark Walnut 36 in. - 42 in. 1 24 BKT ANGLE HW 4PK DWC

Angle Marine Grade White 36 in. - 42 in. 1 24 BKT ANGLE 4PK W MG C

Line Hardware

Stair Hardware

Angle Hardware

Hardware and Brackets


4 in. x 4 in. Post Sleeve Caps

4 in. x 4 in. Post Sleeve Moulding

Fits over 4 in. x 4 in. composite post sleeves.


Harbour Cap White N/A 1 12 CAP HARBOUR 4 W C

Harbour Cap Bronze N/A 1 12 CAP HARBOUR 4 BZ C

Harbour Cap Black N/A 1 12 CAP HARBOUR 4 BL C

Harbour Cap Dark Walnut N/A 1 12 CAP HARBOUR 4 BW C

Pyramid Cap White N/A 1 12 CAP PYRAMID 4 WH



Post Moulding - 4 in. White 1 48 POST SL MLDG 4 W C

Post Moulding - 4 in. Bronze 1 48 POST SL MLDG 4 BZ C

Post Moulding - 4 in. Black 1 48 POST SL MLDG 4 BL C

Post Moulding - 4 in. Dark Walnut 1 48 POST SL MLDG 4 BW C

Caps and Moulding

Horizon and Good Life Adjustable Crush BlocksThe Horizon adjustable crush block extends up to 3-1/2 in.

Item Description Color Rail Height Pcs/Pkg Pkg/ MC Item Number

Adjustable Crush Block White N/A 1 50 CRUSH BLOCK FIB W C

Adjustable Crush Block Bronze N/A 1 50 CRUSH BLOCK FIB BZ C

Adjustable Crush Block Black N/A 1 50 CRUSH BLOCK FIB BL C

Adjustable Crush Block Dark Walnut N/A 1 50 CRUSH BLOCK FIB DW C

Adjustable Crush Blocks



Post Sleeve Surface Mount includes the metal mount bracket and 4 in. x 4 in. wood insert.


4 in. x 4 in. mount 36 in. - 42 in. 48 in. 24 BKT2 SLV MT WD KIT C

Composite Post Sleeves

4 in. x 4 in. Beaded Composite Post Sleeve

5.75 in. x 5.75 in. Post Sleeve Kit

Fits over 4 in. x 4 in. wood post.


4 in. x 4 in. x 39 in. w/ Bead White 36 in. 39 in. 40 POST SL CMP2 39BWHC

4 in. x 4 in. x 48 in. w/ Bead White 36 in. - 42 in. 48 in. 48 POST SL CMP2 48BWHC

4 in. x 4 in. x 48 in. w/ Bead Bronze 36 in. - 42 in. 48 in. 48 POST SL CMP2 48BBZC

4 in. x 4 in. x 48 in. w/ Bead Black 36 in. - 42 in. 48 in. 48 POST SL CMP2 48BBLC

4 in. x 4 in. x 48 in. w/ Bead Dark Walnut 36 in. - 42 in. 48 in. 48 POST SL CMP2 48BDWC

4 in. x 4 in. x 108 in. w/ Bead White All 108 in. 24 POST SL CMP2 108BWHC

4 in. x 4 in. x 108 in. w/ Bead Bronze All 108 in. 24 POST SL CMP2 108BBZC

4 in. x 4 in. x 108 in. w/ Bead Black All 108 in. 24 POST SL CMP2 108BBLC

4 in. x 4 in. x 108 in. w/ Bead Dark Walnut All 108 in. 24 POST SL CMP2 108BBWC

Post Sleeve Kits include cap and moulding.


5.75 in. x 5.75 in. White 36 in. - 42 in. 48 in. 16 POST SL KIT 6X6B W C



Good Life Composite Railing

Good Life Railing Components

Top Rail Dimensions: 2.97 in. x 2.97 in.

Bottom Rail Dimensions: 2 in. x 3.5 in.

• Low maintenance composite saves time; lower price point saves money• Eco-friendly composite core and durable PVC coating ensure lasting performance• Classic rail design and color (white) complements almost any home• Easy installation makes it DIY-friendly

Material: Premium quality composite with permanent PVC surface.

Warranty: 20-year Limited Performance

NOTE: Rail lengths will vary slightly due to manufacturing processes. Make sure rails are cut to correct length, and with hole pattern centered between posts before securing.

Post SleeveCap

Top Rail Bracket

BracketFlange

Top Rail

Bottom Rail

SquareBalusters

Bottom Rail Bracket

Template




Rail sections include top and bottom rails, hardware, and square composite balusters. Posts sold separately.


Line Section White 36 in. 6 ft. 36 SEC14 GL W 6KD 33.5

Line Section White 42 in. 6 ft. 36 SEC14 GL W 6KD 38

Line Section White 36 in. 8 ft. 30 SEC14 GL W 8KD 33.5

Line Section White 42 in. 8 ft. 30 SEC14 GL W 8KD 38

Stair Section White 36 in. 6 ft. 36 SEC14 GLS W 6KD 33.5

Stair Section White 42 in. 6 ft. 36 SEC14 GLS W 6KD 38

Stair Section White 36 in. 8 ft. 30 SEC14 GLS W 8KD 33.5

Stair Section White 42 in. 8 ft. 30 SEC14 GLS W 8KD 38

Good Life Railing Sections with matching Square Composite Balusters

1.25 in. x 1.25 in. square composite balusters. Designed for Good Life Railing.


Square Baluster White 36 in. 33.5 in. 5 BAL14 SQ 33.5 5PK WH

Square Baluster White 42 in. 38 in. 5 BAL14 SQ 38 5PK WH

Square Composite Balusters

Consult applicable building codes to ensure that the infill selected will result in a railing that meets height requirements.

Hardware and Brackets

Good Life brackets come in packs of four.


Line White 36 in. - 42 in 1 12 BKT GL 4PK WH AC

Stair White 36 in. - 42 in 1 8 BKT GL STR 4PK WH AC

Line Brackets Stair Brackets

The Good Life adjustable crush block extends up to 3-1/2 in.

Item Description Color Rail Height Pcs/Pkg Pkg/ MC Item Number

Adjustable Crush Block White 36 in. - 42 in. 1 50 CRUSH BLOCK FIB W C



4 in. x 4 in. Post Sleeve Caps

4 in. x 4 in. Post Sleeve Moulding



Harbour Cap White N/A 1 12 CAP HARBOUR 4 W C

Pyramid Cap White N/A 1 12 CAP PYRAMID 4 WH



Post Moulding - 4 in. White 1 48 POST SL MLDG 4 W C

Caps and Moulding



Post Sleeve Surface Mount includes the metal mount bracket and 4 in. x 4 in. wood insert.


4 in. x 4 in. mount 36 in. - 42 in. 48 in. 24 BKT2 SLV MT WD KIT C

Composite Post Sleeves

4 in. x 4 in. Beaded Composite Post Sleeve

5.75 in. x 5.75 in. Post Sleeve Kit

Fits over 4 in. x 4 in. wood post.


4 in. x 4 in. x 39 in. w/ Bead White 36 in. 39 in. 40 POST SL CMP2 39BWHC

4 in. x 4 in. x 48 in. w/ Bead White 36 in. - 42 in. 48 in. 48 POST SL CMP2 48BWHC

4 in. x 4 in. x 108 in. w/ Bead White All 108 in. 24 POST SL CMP2 108BWHC

Post Sleeve Kits include cap and moulding.


5.75 in. x 5.75 in. White 36 in. - 42 in. 48 in. 16 POST SL KIT 6X6B W C


DECK AND RAIL LIGHTINGP R O D U C T S

Use with LED Lit Post Cap when an un-lit cap is desired.

Item Description Color Watts/Volts Size Pkg / MC Item Number

Flat Top Post Cap White N/A 4 in. x 4 in. 12 CAP FLAT 4 WHITE

Flat Top Post Cap Bronze* N/A 4 in. x 4 in. 12 CAP FLAT 4 BRONZE

Flat Top Post Cap Black N/A 4 in. x 4 in. 12 CAP FLAT 4 BLACK

Flat Top Post Cap Dark Walnut N/A 4 in. x 4 in. 12 CAP FLAT 4 DW

Installs on rail post sleeves. Ideal for accent, stair, and deck surface lighting.


LED Eyeball Light White 1W / 12V 3.5 in. Dia 12 POST EYEBALL LT WH

LED Eyeball Light Bronze* 1W / 12V 3.5 in. Dia 12 POST EYEBALL LT BZ

LED Eyeball Light Black 1W / 12V 3.5 in. Dia 12 POST EYEBALL LT BL

LED Eyeball Light Dark Walnut 1W / 12V 3.5 in. Dia 12 POST EYEBALL LT DW

LED Lit Post Caps fit 4 in. x 4 in. post sleeves. Complements Horizon railing colors and finish.


Flat Top LED Post Cap White 1W 4 in. x 4 in. 12 CAP FLAT LED 4 WHITE

Flat Top LED Post Cap Bronze* 1W 4 in. x 4 in. 12 CAP FLAT LED 4 BRONZ

Flat Top LED Post Cap Black 1W 4 in. x 4 in. 12 CAP FLAT LED 4 BLACK

Flat Top LED Post Cap Dark Walnut 1W 4 in. x 4 in. 12 CAP FLAT LED 4 DW

Rail Lighting Options

4 in. x 4 in. LED Lit Post Cap

3.5 in. Post Sleeve Eyeball Light

4 in. x 4in. Unlit Post Cap

• Made of rust-free aluminum and powder-coated for a long-lasting finish • Each light uses low voltage, environmentally-friendly LED technology and consumes only 1/12 as much energy as standard bulbs • Available remote-control dimmer enables convenient lighting control • Choose from cap and post sleeve lighting styles in four colors


*Please note: Bronze Post Cap and Side Post Lights do not match Horizon Railing in Bronze. We recommend viewing Fiberon deck and rail lighting colors with deck, riser and rail product selections to ensure color compatibility.

• Made of rust-free aluminum and powder-coated for a long-lasting finish • Each light uses low voltage, environmentally-friendly LED technology and consumes only 1/12 as much energy as standard bulbs • Available remote-control dimmer enables convenient lighting control • Choose from riser and recessed lighting styles

Reduce installation time for recessed lights. This single bit enables two different hole size: .75 in. and 1.125 in.


Recessed Light Bit N/A N/A .75 in. x 1.125 in. 3 REC DRILL BIT

Use to supplement the Recessed Light Kit or as part of a complete lighting installation. Recessed lights fit flush with the deck surface.


LED Recessed 2 Pack N/A 1W 1.125 in. Dia 12 REC LED 2PK WHITE

LED Recessed 10 Pack N/A 1W 1.125 in. Dia 6 REC LED 10PK WHITE

Kit includes 10 LED recessed lights, transformer/power source, wire connectors, 100 feet of wire, remote driver, and remote control. Recessed lights fit flush with the deck surface. The transformer can power up to 30 recessed lights total. Additional lights are sold separately in packs of two or 10.


LED Recessed 10-Piece Kit N/A 1W 1.125 in. Dia 6 REC LED KIT WHITE

Deck Lighting Options

2-in-1 Recessed Light Drill Bit

LED Recessed Deck Surface Light Packs

LED Recessed Deck Surface Light Kit

4.25 in. x 2.625 in. LED recessed light that installs on stair risers. Ideal for accent and stair lighting.


Riser Light White 1W / 12V 4.25 in. x 2.625 in. 12 RISER LIGHT WHITE

Riser Light Bronze* 1W / 12V 4.25 in. x 2.625 in. 12 RISER LIGHT BRONZE

Riser Light Black 1W / 12V 4.25 in. x 2.625 in. 12 RISER LIGHT BLACK

Riser Light Dark Walnut 1W / 12V 4.25 in. x 2.625 in. 12 RISER LIGHT DW

4.25 in. x 2.625 in. LED Recessed Riser Light

RemoteDimmerTransformer


*Please note: Bronze Post Cap and Side Post Lights do not match Horizon Railing in Bronze. We recommend viewing Fiberon deck and rail lighting colors with deck, riser and rail product selections to ensure color compatibility.

• Fiberon DC Transformer powers up to 30 watts of lighting• Additional transformers are required for larger lighting projects*5amp DC Transformer is available through special order only.

Item Description Color Watts/Volts Capacity Pcs / MC Item Number

DC Transformer Black 12V DC 120W 6 REC TRANSFORMER

DC Transformer 5amp* Black 12V DC 60W 18 REC TRANSFORMER 60W

• A remote dimmer is required unless the transformer is plugged into a switch-operated outlet• Dimmer includes key fob remote • Remote dimmer and timer must be plugged into a transformer • Photoelectric timer’s light-sensing photocell automatically turns light on and off for up to eight hours; features a dusk-to-dawn setting

Item Description Color Watts/Volts Timer Pcs / MC Item Number

DC Remote Dimmer Black 12V DC N/A 6 REC REMOTE DIMMER

Photoelectric Timer Black 110V 1-8hrs 6 REC 110V TIMER

• Low voltage wire can be run through railing • Structural posts must be routed to run up under 4 in. x 4 in. post sleeves • Wire nuts are required for lighting installations

Item Description Color Watts/Volts Quantity Pcs / MC Item Number

Low Voltage Wire, 18/2 GA N/A 12V DC 100 ft. 4 REC 10 18/2GA WIRE

Silicone Filled Wire Nuts N/A 10 pieces 24 REC WIRE NUTS 10PK

Transformers

Controllers

Wiring

Lighting Accessories


Remote Dimmer

Photoelectric Timer

ADA HANDRAILS Y S T E M

• ADA Handrail is available in 104 in. lengths that can be connected with ADA joiners• Finish with a wall return kit, end loop, or post return• The length of the ADA handrail is supported and attached by ADA mounting brackets (sold separately)

Item Description Color Pcs / Pkg Length Pkg / MC Item Number

Round Handrail with Stiffener White 1 104 in. 1 HR RAIL 104 WH

Round Handrail with Stiffener Black 1 104 in. 1 HR RAIL 104 BL

Round Handrail with Stiffener Brown 1 104 in. 1 HR RAIL 104 BN

90 Degree Corner White 1 N/A 1 HR 90 DEGREE CRNR WH

90 Degree Corner Black 1 N/A 1 HR 90 DEGREE CRNR BL

90 Degree corner Brown 1 N/A 1 HR 90 DEGREE CRNR BN

End Loop White 1 18 in. x 12 in. x 18 in. 1 HR END LOOP WH

End Loop Black 1 18 in. x 12 in. x 18 in. 1 HR END LOOP BL

End Loop Brown 1 18 in. x 12 in. x 18 in. 1 HR END LOOP BN

Post Return White 1 16-1/2 in. x 6 in. 1 HR POST RETURN WH

Post Return Black 1 16-1/2 in. x 6 in. 1 HR POST RETURN BL

Post Return Brown 1 16-1/2 in. x 6 in. 1 HR POST RETURN BN

ADA Handrail

ADA Rail Joiners

ADA Wall Return Kits

ADA Handrail System Components

• Straight and adjustable joiners connect lengths of ADA handrail• ADA joint rings cover and seal spaces between pieces being joined

Item Description Color Pcs / Pkg Length Pkg / MC Item Number

Adjustable Joiner Metal 4 N/A 1 HR ADJUSTABLE JOINER

Straight Joiner Metal 4 6 in. 1 HR STRAIGHT JOINER

Joint Ring White 4 N/A 1 HR JOINT RING WH

Joint Ring Black 4 N/A 1 HR JOINT RING BL

Joint Ring Brown 4 N/A 1 HR JOINT RING BN

• Return kits include return brackets and cover plates • To begin or end an ADA handrail section, ADA return kits can be attached directly to post sleeves

Item Description Color Pcs / Pk Length Pkg / MC Item Number

Wall Return Kit White 1 N/A 1 HR WALL RETURN WH

Wall Return Kit Black 1 N/A 1 HR WALL RETURN BL

Wall Return Kit Brown 1 N/A 1 HR WALL RETURN BN

Straight Wall Return Kit White 1 N/A 1 HR STRGT WALL RTN WH

Straight Wall Return Kit Black 1 N/A 1 HR STRGT WALL RTN BL

Straight Wall Return Kit Brown 1 N/A 1 HR STRGT WALL RTN BN

• ADA code-compliant hand rail• Available in white, black, and brown• Works with Symmetry, Horizon, and Good Life Railing• Backed by a 20-year limited warranty


Mounting Brackets

Accessories• Rail end caps cover the open ends of the ADA handrail• Wall return cover plates cover the base of the ADA wall and straight wall return brackets• Caps and cover plates are included with the return kits


Rail End Cap White 1 N/A 1 HR RAIL END CAP WH

Rail End Cap Black 1 N/A 1 HR RAIL END CAP BL

Rail End Cap Brown 1 N/A 1 HR RAIL END CAP BN

Wall Return Cover Plate White 1 N/A 1 HR BKT RTN CV PLT WH

Wall Return Cover Plate Black 1 N/A 1 HR BKT RTN CV PLT BL

Wall Return Cover Plate Brown 1 N/A 1 HR BKT RTN CV PLT BN

• In order to support the length of ADA handrail, install handrail brackets directly on top of rail post or post sleeve • Bracket kits include brackets, screws and screw caps


Handrail Bracket Kit White 1 N/A 1 HR HAND RAIL BKT WH

Handrail Bracket Kit Black 1 N/A 1 HR HAND RAIL BKT BL

Handrail Bracket Kit Brown 1 N/A 1 HR HAND RAIL BKT BN

90˚ Insert Corner Bracket White 1 N/A 1 HR 90DEG INSD BKT WH

90˚ Insert Corner Bracket Black 1 N/A 1 HR 90DEG INSD BKT BL

90˚ Insert Corner Bracket Brown 1 N/A 1 HR 90DEG INSD BKT BN


CARE AND MAINTENANCEG U I D E

Fiberon® Care and Maintenance

Fiberon Decking

Ventilation

Sleeper Installation

Mind the Gap

Clean Your Deck

Construction Chalk


Colored chalk, used in construction for marking straight lines prior to cutting, is permanent on most surfaces. Contact the manufacturer of the specific brand and color of chalk for a cleaning solution that may prove effective. The best advice is to avoid colored chalk. Use workable alternatives such as white chalk or baby powder.

Clean your deck as often as needed, at least twice each year to remove pollen, organic debris, dirt or stains. Generally, a broom or a blower will work better than a hose for removing scattered organic materials like leaves. For general cleaning, use soap and water or mild household cleaners.

If the gap between decking boards is less than 3/16 in., organic debris such as leaves, seeds or pollen can settle on the deck and clog gaps. Water can pool, steeping organic debris that forms a “tea” or of tannin which may stain your deck. This organic debris is a strong food source for mold. Keeping the gap clean is the easiest way to keep the deck clean. If gapping becomes clogged, use a garden hose, a spatula, putty knife or similar tool to remove debris.

Make sure there is adequate and unobstructed air flow under 50% of the deck. Allow a minimum of 1.5 inches (4 cm) between bottom of joist and the ground. Water must be able to flow away from under the deck. Improve drainage or grade flat areas where standing water may gather. Do not install decking directly to an existing or solid surface.

Minimum joist height is 1.5 inches (4 cm), installed level, in direction of water runoff and directly to a solid sub-structure. Create adequate ventilation for the deck by widening side-to-side spacing between boards to ¼ inch (6 cm) with a maximum of 3/8 inch (9.5 mm) gap. The deck design must allow unrestricted air flow under the deck at the open joist ends for ventilation and drainage.

Important Considerations• Ensure a minimum of 1.5 inches (4 cm) required ventilation under deck and required spacing between decking

boards. See ventilation requirements below.• Improve drainage or grade soil to eliminate standing water under decks.• Direct downspouts, downspout extensions and splash guards away from decks.• Position dryer vents away from decks.• Maintain a deck that is dry and clean.• Clean your deck as often as needed, at least twice each year.• Use extreme caution with pressure washers and use at pressures less than 3,000 psi at 10 in. above deck

surface. Pressure washing is not recommended when mold/mildew are present on the deck.• Keep debris out of gaps between the decking boards so rain showers can remove pollen and organic debris

between cleanings.• Minimize the use of wet mulch up against the deck structure.• Items stored directly on top of the deck surface, such as flower pots, prohibit water evaporation and can cause

some staining on the deck surface.

Masonry Construction

Mold and Mildew

Dirt and Grime

Oil and Grease Stains

Salt and Calcium Chloride


Buildup of salt and calcium chloride from snow and ice removal is easily removed with enough water and perhaps a light scrub. Use a garden hose or sprayer. If using a pressure washer, use at low pressures under 3,000 psi and at safe distances, 10 in. above deck, to avoid damaging your deck. Never use metal shovels or sharp-edged tools to remove snow and ice from the surface of any Fiberon decking product.

Mold and mildew are common environmental conditions. Molds grow on decaying organic material such as wood, leaf decay, and pollen. Tiny and lightweight, mold spores travel easily through the air. Different climates experience varying degrees of these conditions depending on the amount of moisture and heat present.

To thrive, mold and mildew need air, water, elevated temperatures and a food source. There is no way to eliminate all these conditions in the environment. A wide variety of building materials including concrete, wood products, vinyl siding and many others are subject to potential mold growth.

To minimize mold on your decking, clean your deck as often as needed, at least twice each year. Climate conditions vary in different regions of the country and may necessitate more periodic cleaning. Removal of leaves, debris, and other organic materials that provide a food source for mold development is important. If mold is present on your deck, there are many commercial products available for cleaning mold. We recommend the following commercial cleaners. For best results, be sure to follow the manufacturer’s instructions and use cleaners within their stated shelf life. Do not mix recommended cleaning products together, as harmful chemical reactions could occur. Never mix bleach and acids.

Collier Manufacturing 30-Seconds® Outdoor Cleaner and 30-Seconds® Spray & Walk Away are heavy duty, mildly alkaline, chlorinated mold and mildew removers/cleaners that are biodegradable once rinsed into the soil. Both have been tested and perform very well in removing mold and mildew and retarding its return.

For more information on cleaning mold and mildew, see Fiberon Technical Bulletin # 13 at this link, fiberondecking.com/resources/literature.

Speedy clean-up is best. To clean grease and oil stains that soap and water cannot remove, some all-purpose cleaners such as Fantastik will cut through grease and grime. Or use a commercial deck cleaner designed specifically for your type of decking. De-Solv-It Citrus Solution is effective in removing tar, asphalt, oil, grease and chewing gum. Be sure to follow the manufacturer’s recommendations and test in an inconspicuous area prior to cleaning the entire deck

Dislodge accumulated dirt with a broom or by using soap and water and a non-metal scrub brush. Thoroughly rinse off with a garden hose. Skilled professionals may use a pressure washer with wide fan tips, at low pressures under 3,000 psi and at safe distances, 10 in. above deck. In the wrong hands, your composite deck can be damaged. Exercise extreme caution.

It is important to protect decking during masonry construction. White or hazy residue from mineral deposits (efflorescence) can leach out of stone and masonry materials after water evaporates, leaving the deposits behind. Minerals from soils in certain arid and mountainous environments can also cause a hazing affect when deposited on the deck surface. This can only be prevented with complete and secure coverage of the decking surface area during the construction phase or installation of the decking after the masonry construction phase. To minimize this affect during masonry construction, keep materials dry and allow masonry and cement to cure properly. For mineral deposits left on the decking surface, periodic cleaning is required to maintain visual attractiveness. Fiberon Composite Deck Cleaner is specifically formulated to clean dirt, clay, mud, soil, mineral deposits and masonry and stucco residue. Use the Fiberon Composite Deck Cleaner with a brass bristle brush to clean, repeating the process as needed. Be sure to follow the label instructions. Do not mix recommended cleaning products together as harmful chemical reactions could occur.

Static

Rubber Mats

Fire and Unusual Heat Sources


Important Ladder Usage Safety Instructions

Fiberon Paramount Decking

Recommended cleaners include Simple Green and Krud Kutter Cleaner Degreaser. Follow the manufacturer’s instructions and test in an inconspicuous area to make sure cleaner does not harm the decking surface. Avoid the use of rubber or vinyl products on Paramount Decking, as a reaction could occur resulting in discoloration under the rubber or vinyl product. Certain chemical ingredients in products such as insect repellent and sunblock could cause a reaction and result in a stain on the decking surface.

FIB-0207-LIT REV H 915

Composite decking will retain heat when exposed to direct or reflective sunlight. Exercise caution if walking barefoot as footwear may be required. Fire and unusual sources of heat and heat build-up can possibly damage Fiberon decking surfaces. Examples would include fire, reflected light from different types of glass (ex. low-e glass), fire features, and under-deck waterproofing installations that do not provide the six inches (15 cm) of unobstructed net free ventilation.

• Low-E Glass/Reflected HeatLow-emissivity (Low-E) glass is designed to prevent heat gain inside the house by reflecting sunlight outward. This reflective property can result in excessive heat build on the surface of Fiberon decking. The properties that Low-E glass employs to prevent passive heat gain within a structure can result in unusual heat build-up on exterior surfaces.

When sunlight is reflected and concentrated, it can harm a range of building materials, including doors, windows, siding, trim and decking. Damage caused to these products can include melting, sagging, warping, discoloration, increased expansion and contraction, and accelerated weathering.

If you have questions on how to reduce this risk, contact the manufacturer of the product which contains the Low-E glass for suggestions on how to reduce or eliminate the reflected heat.

• Under-deck Waterproofing SystemsUnder-deck waterproofing systems, properly installed, can provide additional living or storage space. Improper installations are those that restrict air flow and result in build-up of heat and/or humidity which can result in unwanted consequences. Contact the manufacturer of the specific under-deck waterproofing system for installation instructions to ensure the required six inches (15 cm) of unobstructed ventilation is achieved for Fiberon decking. If already installed, seek methods to achieve the ventilation requirement.

• Fire Features/Fire PitsFire features and fire pits are increasingly popular in outdoor living environments. Fire can damage many building products, including Fiberon decking. Improperly installed fire features and fire pits can cause damage to the surface of Fiberon decking via direct exposure to the flame or excessive radiated heat. Proper caution should be taken when designing, installing and using these features to ensure damage does not result.

When using a ladder, place the ladder on a piece of ¾ in. plywood firmly secured to the deck surface. This will disperse the load of the ladder’s feet to nearby underlying joists. Drill fasteners downward through the top of the plywood sheet, into the deck board gaps and into the joists to keep the plywood from slipping. This avoids leaving holes in your decking once the plywood sheet is removed. Be sure to follow the ladder manufacturer’s instructions and safety tips.

Welcome mats or grill mats with a rubber, vinyl or latex backing can mark your deck. The marks can be removed; however, to avoid them, use only polypropylene or colorfast woven rugs.

Dry or windy environments may create a temporary condition of static electricity, which will vary depending on climate and site conditions. Heat pumps and dryer vents that are close to, or pointed toward the decking material can also generate static electricity on the deck.

WARRANTYI N F O R M A T I O N

PLEASE READ THIS WARRANTY CAREFULLY BEFORE PURCHASING, USING OR INSTALLING YOUR FIBERON® PRODUCT. THIS WARRANTY IS A BASIS OF THE BARGAIN AND PURCHASE OF THE FIBERON PRODUCT AND SETS FORTH THE ENTIRE WARRANTY AND RESPONSIBILITY OF FIBERON. PURCHASE AND USE OF THE FIBERON PRODUCT CONSTITUTES ACCEPTANCE OF AND AGREEMENT TO THESE TERMS. SECTION 5 CONTAINS A BINDING ARBITRATION CLAUSE AND CLASS ACTION WAIVER THAT AFFECTS YOUR RIGHTS ABOUT HOW TO RESOLVE ANY DISPUTE WITH FIBERON.

Residential Limited Warranty

Limited Warranty

Fiber Composites LLC, individually and doing business as Fiberon (“Fiberon”) warrants to the original purchaser (“Purchaser”, “you” or “your”) that for the Warranty Period set forth below the following products (“Fiberon Product”) shall, under normal and proper service conditions, remain free from material manufacturing defects and will not check, splinter, delaminate, rot, or suffer structural damage from fungal decay, when installed, used and maintained in an above-ground application and in accordance with Fiberon’s written instructions. For purposes of this Limited Warranty, (a) the “original purchaser” means the individual or individuals who were the owners of the structure when the deck constructed of the subject Fiberon Products was installed, and (b) a “residential application” is an installation of the Fiberon Product on an owner-occupied residence

The term of this Limited Warranty (“Warranty Period”) for the Fiberon Product listed below shall be in effect from the date of original purchase by or for a residential application as long as the Purchaser owns the property upon which the Fiberon Product was installed.

Decking: Fiberon® Paramount™ PVC Decking

The term of this Limited Warranty (“Warranty Period”) for the Fiberon Product listed below shall be twenty-five (25) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed.

Decking: Fiberon Horizon® Decking, Fiberon Horizon Symmetry™ Collection Decking, Fiberon ProTect Advantage® Decking, Fiberon ProTect® Decking, Fiberon Sanctuary® Decking, Fiberon Good Life™ Decking

Railing: Fiberon® Symmetry Railing

The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be twenty (20) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed.

Decking: Fiberon Professional Decking, Fiberon Xtreme Decking, Fiberon Xtreme Wide Decking, Terranova® Xtreme, Fiberon ArmorGuard® Decking and Veranda® ArmorGuard Decking

Railing: Fiberon Horizon Railing, Fiberon Good Life Railing, Fiberon Natural Railing, Fiberon HomeSelect® Railing, Veranda ArmorGuard Railing, Veranda Regency Railing and Veranda Enclave® Railing

Fasteners: Fiberon and Phantom® branded Hidden Fasteners (“Fiberon Fastener”) as listed on www.fiberondecking.com

Lifetime Limited Warranty

25-year Limited Warranty



The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be fifteen (15) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed.

Decking: Fiberon Traditional Decking, Fiberon Exotics Decking, Terranova Decking and Veranda Composite DeckingFencing: Fiberon Fencing Pickets and Cross Rails, Veranda Composite Fencing Pickets and Cross Rails, Fiberon Wood

Shades® Fencing Pickets and Cross Rails Note: Substitution of wood or other materials for any portion of the Fencing system will void this warranty.

This warranty is only valid if the entire Fiberon manufactured system is used: Posts, Pickets and Backer Rails.

The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be ten (10) years from the date of original purchase by or for a residential application as long as the Original Purchaser owns the property upon which the Fiberon Product was installed.

Fencing: Fiberon Wood Shades Fencing Posts, Fiberon Fencing Posts, Veranda Composite Fencing Posts Note: Substitution of wood or other materials for any portion of the Fencing system will void this warranty.

This warranty is only valid if the entire Fiberon manufactured system is used: Posts, Pickets and Backer Rails.

Fiberon written instructions are available from your Fiberon dealer or your contractor or from Fiberon at fiberondecking.com or by writing to Fiberon at the address stated below.

In the event of a failure of the Fiberon Product or Fiberon Fastener within the applicable Warranty Period as warranted above, when properly installed, used and maintained as described above, Fiberon will replace the nonconforming item as set forth in Section 2 below.

The limited warranty set forth in this Limited Warranty is the only warranty (whether written or oral, express or implied) Fiberon makes for your Fiberon Product or Fiberon Fasteners; it is subject to all terms and conditions stated herein and no one (including but not limited to a Fiberon dealer, installer, reseller, agent or employee) is authorized to modify, expand or add to this limited warranty. Fiberon makes no other representation, guarantee or warranty. No one is authorized to make any representation, guarantee or warranty on Fiberon’s behalf, and Fiberon shall not be bound by or liable for, any representation, guarantee, warranty, or condition with regard to any Fiberon Product or Fiberon Fastener other than as expressly stated in this Limited Warranty. THIS LIMITED WARRANTY COMPRISES FIBERON’S SOLE AND ENTIRE WARRANTY AND OBLIGATION IN CONNECTION WITH FIBERON PRODUCTS OR FIBERON FASTENERS. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, CONDITION, SUITABILITY, OR PERFORMANCE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED. ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NOT EFFECTIVELY DISCLAIMED ARE LIMITED TO THE APPLICABLE STATUTE OF LIMITATIONS BUT IN NO EVENT WILL EXTEND BEYOND THE APPLICABLE WARRANTY PERIOD. FIBERON EXCLUDES AND WILL NOT PAY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT, REGARDLESS OF THE BASIS OF ANY CLAIM OR LIABILITY, SHALL FIBERON BE LIABLE FOR ANY DAMAGES, OF ANY NATURE OR DESCRIPTION WHATSOEVER, EXCEEDING THE ACTUAL PURCHASE PRICE, AND ANY LIABILITY SHALL BE LIMITED TO, THE ACTUAL PURCHASE PRICE OF THE DEFECTIVE PRODUCT AS ADJUSTED ON THE BASIS OF THE PRORATED WARRANTY SCHEDULE PROVIDED HEREIN.



Obtaining Instructions

Warranty Period Replacement

Terms and Conditions


Warranty Claim Procedure

General Conditions, Exclusions and Limitations

To make a warranty claim, the Purchaser must send a copy of this warranty document, copy of original proof of purchase, and photos of the defective or nonconforming Fiberon Product or Fiberon Fasteners, to the address below. Such proof of purchase must be from an authorized Fiberon Product dealer and must show (1) the date of the purchase and (2) that sufficient Fiberon Product has been purchased to cover the number of lineal feet claimed to be damaged. All warranty claims must be received by Fiberon within the Warranty Period and in no event later than thirty (30) days after any discovery of a possible nonconforming nature of or other failure of the Fiberon Product or Fiberon Fastener.

Purchaser’s sole remedy, and Fiberon’s sole liability, for any claim whatsoever relating to the Fiberon Product or Fiberon Fastener, including without limitation any claims arising out of the marketing, purchase, installation, use, storage, possession or maintenance of Fiberon Products (whether such claim arises in contract, warranty, tort, gross negligence, negligence, strict liability, statutes or regulations, or otherwise) or any claims that the Fiberon Products or Fiberon Fasteners failed to perform as warranted above, is and shall be the replacement of the defective Fiberon Product or Fiberon Fastener with new Fiberon Product or Fiberon Fastener, as the case may be, in an amount equal to the volume (linear feet) of defective material as listed on the Prorated Warranty Schedule contained herein or the number of defective Fiberon Fasteners. Replacement Fiberon material will be as close in color, design and quality to the original installation as reasonably possible, in Fiberon’s discretion and determination, but Fiberon does not guarantee an exact match as colors and designs may change. Additionally, Purchaser agrees to the use of such fasteners as adequate for reinstallation of the furnished board, irrespective of existing method. Fiberon may, at its option, elect to refund the percentage of the original purchase price listed under Recovery on the Prorated Warranty Schedule in lieu of replacing the defective product.

Claims and Notices must be sent to:

Fiberon Consumer and Technical Support Department181 Random Dr., New London, NC 28127 Phone 844-226-3958 | Fax 704-463-1750 | email [email protected]

1. Make a Claim

Purchaser’s Sole Remedy

Exclusions and Limitations of Certain Damages

2. Submit a Claim

3. Temporary Repairs and Determination

Upon discovering a possible defect of the Fiberon Product or Fiberon Fastener, Purchaser must make temporary repairs or cordon off the area at the Purchaser’s expense to protect all property and persons that could be affected. If needed, the Purchaser must allow Fiberon to enter the property into which the Fiberon Product or Fiberon Fastener is installed to inspect the nonconforming product. Fiberon must have made a determination on the warranty claim before any permanent repairs or removal of materials may be undertaken. No products shall be returned to Fiberon unless directed and authorized by Fiberon in writing to do so. Any removal or disposal of defective products shall be at Purchaser’s expense.

In no event will Fiberon be liable for any direct, indirect, incidental, special, consequential, punitive, exemplary, statutory, special, or other, damages based upon the Fiberon Products or Fiberon Fasteners or resulting, directly or indirectly, from any defect in the Fiberon Products or Fiberon Fasteners, including but not limited to damage to, diminution in value of and/or loss of use or enjoyment of, any property or part thereof, whether based on contract, tort, strict liability, statute, regulation or otherwise, even if Fiberon is expressly advised about the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages in certain circumstances, so the above limitation may not apply to you.


In addition, this Limited Warranty does not cover and Fiberon shall not be liable for any installation, removal or reinstallation costs. Fiberon does not warrant against and is not responsible for, and no express or implied warranty shall be deemed to cover, any condition attributable to: (1) improper installation of Fiberon products and/or failure to abide by Fiberon’s written instructions and any applicable laws or building codes, including but not limited to improper structural support, fastening, ventilation or gapping; (2) use of Fiberon Products beyond normal use or in an application not recommended or permitted by Fiberon’s written instructions and applicable laws and building codes; (3) movement, distortion, collapse or settling of the ground or the supporting structure on which Fiberon Products are installed; (4) Defects in or failure arising from decking structure resulting from water caused by improper installation, workmanship, maintenance or repair; (5) any Act of God (including but not limited to flooding, hurricane, tornado, wind, earthquake, lightning, hail, etc.); (6) discoloration, fading, spotting or staining from or caused, in whole or in part, by mold, mildew, other fungal growth, organic materials, metallic oxides or particles (including but not limited to rust or corrosion of any fasteners), dirt, other atmospheric or environmental pollutants, foreign substances such as grease or oil, chemicals (including but not limited to those found in cleaners), or normal weathering (defined as natural efflorescence, exposure to sunlight, weather and atmospheric conditions which causes any colored surface to gradually fade, flake, chalk, or accumulate dirt or stains); (7) damage resulting from casualty, fire or exposure to heat sources such as cooking devices or retro-reflective surfaces; (8) the application of paints, stains, surface treatments or other chemical substances including but not limited to cleaners or pesticides; (9) fading, flaking or other deterioration of any paints, stains or other coatings placed on the Fiberon Products; (10) climate change, environmental conditions, static electricity or any cause beyond the control of Fiberon; (11) variations or changes in color of Fiberon Products; (12) improper handling, maintenance, storage, abuse or neglect of Fiberon Products by Purchaser or others; (13) ordinary wear and tear; (14) impact from objects; or (15) any fasteners not supplied or approved by Fiberon.

No warranty is given with respect to any fasteners other than the Fiberon Fasteners. Other fasteners, whether approved fasteners or otherwise, are subject to only the warranties provided by the manufacturer of the fastener and Purchaser’s sole warranty and remedy is with that manufacturer.

Additional Terms and Limitations

The suitability of the Fiberon Products for Purchaser’s property for the installation and use of the Fiberon Products, including but not limited to whether the Fiberon Product meets the requirements of any applicable building or safety code or similar regulation relating to Purchaser’s property, is the responsibility of the Purchaser and/or its design professionals, and not that of Fiberon. Fiberon does not provide architectural or engineering services. Fiberon makes no express or implied warranty or representation as to the suitability of the Fiberon Products for, or actual performance, capabilities or operation of the Fiberon Products at, Purchaser’s property or under the conditions of Purchaser’s use. Without limitation on any other provision of this Limited Warranty, all warranties, whether express or implied, and including this Limited Warranty, are void if any one or more of the following applies or occurs: (i) the Fiberon Product or Fiberon Fastener is not installed, maintained and/or used strictly in accordance with Fiberon’s written instructions, and all applicable laws, codes and regulations; (ii) misuse of the product, whether foreseeable or unforeseeable; (iii) failure of proper and timely maintenance or repair; (iv) failure to provide timely notice to Fiberon of any failure or defect of the Fiberon Product or Fiberon Fastener; or (v) use of fasteners other than the Fiberon branded fasteners or approved hidden fasteners listed on fiberondecking.com to the extent that the Fiberon Product failures resulted from the use of non-approved fasteners.

Prorated Limited Warranty Schedule

Recovery10-Year Residential 15-Year Residential 20-Year Residential 25-Year Residential

Year of Claim Year of Claim Year of Claim Year of Claim

100% 0 - 5 years 0 - 7 years 0 - 10 years 0 - 10 years

80% 6 years 8 - 9 years 11 - 12 years 11 - 13 years



20% 9 years 14 years 17 - 18 years 20 - 22 years

10% 10 years 15 years 19 - 20 years 23 - 25 years


This section applies to any dispute between you and Fiberon relating to your Fiberon Product. "Dispute" will be given the broadest possible meaning allowable under law.

Binding Arbitration and Class Action Waiver if You Live in the United States

1. Notice of Dispute

2. Small Claims Court

3. Binding Arbitration

4. Class Action Waiver

In the event of a dispute, you must give Fiberon a Notice of Dispute, which is a written statement that sets forth the name, address and contact information of the party giving it, the facts giving rise to the dispute, and the relief requested. You must send any Notice of Dispute by U.S. Mail to Fiberon, Consumer and Technical Support Department, 181 Random Dr. New London, NC 28127. You will attempt to resolve any dispute with Fiberon through informal negotiation within 60 days from the date the Notice of Dispute is sent. After 60 days, you may commence arbitration.

You may also litigate any dispute in small claims court in your county of residence, if the dispute meets all requirements to be heard in the small claims court. You may litigate in small claims court whether or not you negotiated informally first.

BINDING ARBITRATION. IF YOU AND FIBERON DO NOT RESOLVE ANY DISPUTE BY INFORMAL NEGOTIATION OR IN SMALL CLAIMS COURT, ANY EFFORT TO RESOLVE THE DISPUTE WILL BE CONDUCTED EXCLUSIVELY BY BINDING ARBITRATION. YOU ARE GIVING UP THE RIGHT TO LITIGATE (OR PARTICIPATE IN AS A PARTY OR CLASS MEMBER) ALL DISPUTES IN COURT BEFORE A JUDGE OR JURY. Instead, all disputes will be resolved before a neutral arbitrator, whose decision will be final except for a limited right of appeal under the Federal Arbitration Act. Any court with jurisdiction over the parties may enforce the arbitrator's award.

Any proceedings to resolve or litigate any dispute in any forum will be conducted solely on an individual basis. Neither you nor Fiberon will seek to have any dispute heard as a class action, private attorney general action, or in any other proceeding in which either party acts or proposes to act in a representative capacity. No arbitration or proceeding will be combined with another without the prior written consent of all parties to all affected arbitrations or proceedings.

Choice of Law

5. Arbitration Procedure, Costs, Fees and Incentives

Any arbitration will be conducted by the American Arbitration Association (the "AAA") under its Commercial Arbitration Rules and in many cases it’s Supplementary Procedures for Consumer-Related Disputes. For more information, see www.adr.org or call 1-800-778-7879. In any dispute seeking less than $10,000 in damages, Fiberon will promptly reimburse your filing fees and pay the AAA's and arbitrator's fees if you are the prevailing party. You agree to commence arbitration only in your county of residence or New London, NC, USA.

North Carolina law shall govern the interpretation of this Limited Warranty and any claim that Fiberon has breached it, regardless of conflict of law principles.

Please register your warranty at this link. Fiberon strongly suggests our customers register your warranty for quicker technical support and warranty service. Fiberon product registration is voluntary. Failure to register will not diminish your limited warranty rights.

Fiberon Respects Your Privacy. Fiberon does not trade customer information. Just as important, you control how Fiberon contacts you. We will collect your preferences at the end of warranty registration and we encourage you to view our complete online privacy policy.

FIB-0291-LIT Rev D 0216


PLEASE READ THIS WARRANTY CAREFULLY BEFORE PURCHASING, USING OR INSTALLING YOUR FIBERON PRODUCT. THIS WARRANTY IS A BASIS OF THE BARGAIN AND PURCHASE OF THE FIBERON PRODUCT AND SETS FORTH THE ENTIRE WARRANTY AND RESPONSIBILITY OF FIBERON. PURCHASE AND USE OF THE FIBERON PRODUCT CONSTITUTES ACCEPTANCE OF AND AGREEMENT TO THESE TERMS. SECTION 5 CONTAINS A BINDING ARBITRATION CLAUSE AND CLASS ACTION WAIVER THAT AFFECTS YOUR RIGHTS ABOUT HOW TO RESOLVE ANY DISPUTE WITH FIBERON.

Commercial Limited Warranty

Warranty



Fiber Composites LLC, individually and doing business as Fiberon (“Fiberon”) warrants to the original purchaser (“Purchaser”, “you” or “your”) that for the Warranty Period set forth below the following Products (“Fiberon Product”) shall, under normal and proper service conditions, remain free from material manufacturing defects and will not check, splinter, delaminate, rot, or suffer structural damage from fungal decay, when installed, used and maintained in an above-ground application and in accordance with Fiberon’s written instructions. For purposes of this Limited Warranty, (a) the “original purchaser” means the individual or individuals who were the owners of the structure when the deck constructed of the subject Fiberon Products was installed, and (b) a “commercial application” is an installation of the Fiberon Product on a commercial building.

The term of this Limited Warranty (“Warranty Period”) for the Fiberon Product listed below shall be ten (10) years from the date of original purchase by or for a commercial application for a commercial purchaser as long as the Purchaser owns the property upon which the Fiberon Product was installed.

Decking: Fiberon® Paramount® Decking, Fiberon Horizon® Decking, Fiberon Horizon Symmetry™ Collection Decking, Fiberon Pro-Tect® Decking, Fiberon ProTect Advantage® Decking, Fiberon Sanctuary® Decking, Fiberon Good Life™ Decking, Fiberon Xtreme Decking, Terranova® Xtreme Decking, Fiberon Xtreme Wide Decking, Fiberon Exotics Decking, Fiberon Traditional Decking, Fiberon ArmorGuard Decking, Terranova® Decking

The term of this Limited Warranty (“Warranty Period”) for the Fiberon Products listed below shall be five (5) years from the date of original purchase by or for a commercial application for a commercial purchaser as long as the Purchaser owns the property upon which the Fiberon Product was installed.

Decking: Fiberon Professional DeckingRailing: Fiberon Symmetry Railing, Fiberon Horizon Railing, Fiberon Good Life RailingFasteners: Fiberon and Phantom® branded Hidden Fasteners as listed on www.fiberondecking.com

Obtaining Instructions

Warranty Period Replacement

Fiberon written instructions are available from your Fiberon dealer or your contractor or from Fiberon at fiberondecking.com or by writing to Fiberon at the address stated below.

In the event of a failure of the Fiberon Product or Fiberon Fastener within the applicable Warranty Period as warranted above, when properly installed, used and maintained as described above, Fiberon will replace the nonconforming item as set forth in Section 2 below


The limited warranty set forth in this Limited Warranty is the only warranty (whether written or oral, express or implied) Fiberon makes for your Fiberon Product or Fiberon Fasteners; it is subject to all terms and conditions stated herein and no one (including but not limited to a Fiberon dealer, installer, reseller, agent or employee) is authorized to modify, expand or add to this limited warranty. Fiberon makes no other representation, guarantee or warranty. No one is authorized to make any representation, guarantee or warranty on Fiberon’s behalf, and Fiberon shall not be bound by or liable for, any representation, guarantee, warranty, or condition with regard to any Fiberon Product or Fiberon Fastener other than as expressly stated in this Limited Warranty. THIS LIMITED WARRANTY COMPRISES FIBERON’S SOLE AND ENTIRE WARRANTY AND OBLIGATION IN CONNECTION WITH FIBERON PRODUCTS OR FIBERON FASTENERS. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, CONDITION, SUITABILITY, OR PERFORMANCE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED. ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NOTEFFECTIVELY DISCLAIMED; ARE LIMITED TO THE APPLICABLE STATUTE OF LIMITATIONS, BUT IN NO EVENT WILL EXTEND BEYOND THE APPLICABLE WARRANTY PERIOD. FIBERON EXCLUDES AND WILL NOT PAY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT, REGARDLESS OF THE BASIS OF ANY CLAIM OR LIABILITY, SHALL FIBERON BE LIABLE FOR ANY DAMAGES, OF ANY NATURE OR DESCRIPTION WHATSOEVER, EXCEEDING, AND ANY LIABILITY SHALL BE LIMITED TO, THE ACTUAL PURCHASE PRICE OF THE DEFECTIVE PRODUCT AS ADJUSTED ON THE BASIS OF THE PRORATED WARRANTY SCHEDULE PROVIDED HEREIN..

Terms and Conditions


1. Make a Claim

2. Submit a Claim


To make a warranty claim, the Purchaser must send a copy of this warranty document, copy of original proof of purchase, and photos of the defective or nonconforming Fiberon Product or Fiberon Fasteners to the address below. Such proof of purchase must be from an authorized Fiberon Product dealer and must show (1) the date of the purchase and (2) that sufficient Fiberon Product has been purchased to cover the number of lineal feet claimed to be damaged. All warranty claims must be received by Fiberon within the Warranty Period and in no event later than thirty (30) days after any discovery of a possible nonconforming nature of or other failure of the Fiberon Product or Fiberon Fastener.

Send Claims and Notices to:

FiberonConsumer and Technical Support Department181 Random Dr. New London, NC 28127 Phone 844-226-3958 | Fax 704-463-1750 | email [email protected]

Upon discovering a possible defect of the Fiberon Product or Fiberon Fastener, Purchaser must make temporary repairs or cordon off the area at the Purchaser’s expense to protect all property and persons that could be affected. If needed, the Purchaser must allow Fiberon to enter the property into which the Fiberon Product or Fiberon Fastener is installed to inspect the nonconforming Product. Fiberon must have made a determination on the warranty claim before any permanent repairs or removal of materials may be undertaken. No Products shall be returned to Fiberon unless directed and authorized by Fiberon in writing to do so. Any removal or disposal of defective Products shall be at Purchaser’s expense.




Purchaser’s sole remedy, and Fiberon’s sole liability, for any claim whatsoever relating to the Fiberon Product or Fiberon Fastener, including without limitation, any claims arising out of the marketing, purchase, installation, use, storage, possession or maintenance of Fiberon Products (whether such claim arises in contract, warranty, tort, gross negligence, negligence, strict liability, statutes or regulations, or otherwise) or any claims that the Fiberon Products or Fiberon Fasteners failed to perform as warranted above, is and shall be the replacement of the defective Fiberon Product or Fiberon Fastener with new Fiberon Product or Fiberon Fastener, as the case may be, in an amount equal to the volume (linear feet) of defective material as listed on the Prorated Warranty Schedule contained herein or the number of defective Fiberon Fasteners. Replacement Fiberon material will be as close in color, design and quality to the original installation as reasonably possible, in Fiberon’s discretion and determination, but Fiberon does not guarantee an exact match as colors and designs maychange. Additionally, Purchaser agrees to the use of such fasteners as adequate for reinstallation of the furnished board, irrespective of existing method. Fiberon may, at its option, elect to refund the percentage of the original purchase price listed under Recovery on the Prorated Warranty Schedule in lieu of replacing the defective Product.


In no event will Fiberon be liable for any direct, indirect, incidental, special, consequential, punitive, exemplary, statutory, special, or other, damages based upon the Fiberon Products or Fiberon Fasteners or resulting, directly or indirectly, from any defect in the Fiberon Products or Fiberon Fasteners, including but not limited to damage to, diminution in value of and/or loss of use or enjoyment of, any property or part thereof, whether based on contract, tort, strict liability, statute, regulation or otherwise, even if Fiberon is expressly advised about the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages in certain circumstances, so the above limitation may not apply to you.In addition, this Limited Warranty does not cover and Fiberon shall not be liable for any installation, removal or reinstallation costs. Fiberon does not warrant against and is not responsible for, and no express or implied warranty shall be deemed to cover, any condition attributable to: (1) improper installation of Fiberon products and/or failure to abide by Fiberon’s written instructions and any applicable laws or building codes, including but not limited to improper structural support, fastening, ventilation or gapping; (2) use of Fiberon Products beyond normal use or in an application not recommended or permitted by Fiberon’s written instructions and applicable laws and building codes; (3) movement, distortion, collapse or settling of the ground or the supporting structure on which Fiberon Products are installed; (4) Defects in or failure arising from decking structure resulting from water caused by improper installation, workmanship, maintenance or repair; (5) any Act of God (including but not limited to flooding, hurricane, tornado, wind, earthquake, lightning, hail, etc.); (6) discoloration, fading, spotting or staining from or caused, in whole or in part, by mold, mildew, other fungal growth, organic materials, metallic oxides or particles (including but not limited to rust or corrosion of any fasteners), dirt, other atmospheric or environmental pollutants, foreign substances such as grease or oil, chemicals (including but not limited to those found in cleaners), or normal weathering (defined as natural efflorescence, exposure to sunlight, weather and atmospheric conditions which causes any colored surface to gradually fade, flake, chalk, or accumulate dirt or stains); (7) damage resulting from casualty, fire or exposure to heat sources such as cooking devices or retro-reflective surfaces; (8) the application of paints, stains, surface treatments or other chemical substances including but not limited to cleaners or pesticides; (9) fading, flaking or other deterioration of any paints, stains or other coatings placed on the Fiberon Products; (10) climate change, environmental conditions, static electricity or any cause beyond the control of Fiberon; (11) variations or changes in color of Fiberon Products; (12) improper handling, maintenance, storage, abuse or neglect of Fiberon Products by Purchaser or others; (13) ordinary wear and tear; (14) impact from objects; or (15) any fasteners not supplied or approved by Fiberon.No warranty is given with respect to any fasteners other than the Fiberon Fasteners. Other fasteners, whether approved fasteners or otherwise, are subject to only the warranties provided by the manufacturer of the fastener and Purchaser’s sole warranty and remedy is with that manufacturer.







This section applies to any dispute between you and Fiberon relating to your Fiberon Product. “Dispute” will be given the broadest possible meaning allowable under law.



IF YOU AND FIBERON DO NOT RESOLVE ANY DISPUTE BY INFORMAL NEGOTIATION OR IN SMALL CLAIMS COURT, ANY EFFORT TO RESOLVE THE DISPUTE WILL BE CONDUCTED EXCLUSIVELY BY BINDING ARBITRATION. YOU ARE GIVING UP THE RIGHT TO LITIGATE (OR PARTICIPATE IN AS A PARTY OR CLASS MEMBER) ALL DISPUTES IN COURT BEFORE A JUDGE OR JURY. Instead, all disputes will be resolved before a neutral arbitrator, whose decision will be final except for a limited right of appeal under the Federal Arbitration Act. Any court with jurisdiction over the parties may enforce the arbitrator's award.




The suitability of the Fiberon Products for Purchaser’s property for the installation and use of the Fiberon Products, including but not limited to whether the Fiberon Product meets the requirements of any applicable building or safety code or similar regulation relating to Purchaser’s property, is the responsibility of the Purchaser and/or its design professionals, and not that of Fiberon. Fiberon does not provide architectural or engineering services. Fiberon makes no express or implied warranty or representation as to the suitability of the Fiberon Products for, or actual performance, capabilities or operation of the Fiberon Products at, Purchaser’s property or under the conditions of Purchaser’s use.Without limitation on any other provision of this Limited Warranty, all warranties, whether express or implied, and including this Limited Warranty, are void if any one or more of the following applies or occurs: (i) the Fiberon Product or Fiberon Fastener is not installed, maintained and/or used strictly in accordance with Fiberon’s written instructions, and all applicable laws, codes and regulations; (ii) misuse of the product, whether foreseeable or unforeseeable; (iii) failure of proper and timely maintenance or repair; (iv) failure to provide timely notice to Fiberon of any failure or defect of the Fiberon Product or Fiberon Fastener; or (v) use of fasteners other than the Fiberon branded fasteners or approved hidden fasteners listed on fiberondecking.com to the extent that the Fiberon Product failures resulted from the use of non-approved fasteners.

Arbitration Procedure, Costs, Fees and Incentives

Any arbitration will be conducted by the American Arbitration Association (the "AAA") under its Commercial Arbitration Rules and in many cases it’s Supplementary Procedures for Consumer-Related Disputes. For more information, see www.adr.org or call 1-800-778-7879. In any dispute seeking less than $10,000 in damages, Fiberon will promptly reimburse your filing fees and pay the AAA's and arbitrator's fees if you are the prevailing party. You agree to commence arbitration only in your county of residence or New London, NC.

North Carolina law shall govern the interpretation of this Limited Warranty and any claim that Fiberon has breached it, regardless of conflict of law principles.Please register your warranty at this link. Fiberon strongly suggests our customers register your warranty for quicker technical support and warranty service. Fiberon product registration is voluntary. Failure to register will not diminish your limited warranty rights.Fiberon Respects Your Privacy. Fiberon does not trade customer information. Just as important, you control how Fiberon contacts you. We will collect your preferences at the end of warranty registration and we encourage you to view our complete online privacy policy.

FIB-0292-LIT Rev D 0216

Prorated Limited Warranty Schedule

Recovery

10-Year Residential 5-Year Residential

Year of Claim Year of Claim

100% 0 - 5 years 1 year

80% 6 years 2 years

60% 7 years 3 years

40% 8 years 4 years

20% 9 years 5 years

10% 10 years -

Choice of Law


Stain and Fade Performance Limited Warranty

Warranty Coverage

Exclusions from Stain and Fade Warranty Coverage

Stain Resistance

25-Year Coverage

20-Year Coverage

Fade Resistance


Fiberon does not warrant its Fiberon Products to be stain or fade proof. When installed, cared for and maintained properly in the residential exterior deck environment, Fiberon Decking products provide stain and fade resistance. However, no material is stain or fade proof, especially but not only when stains result from spilled or otherwise substances that are not properly cleaned or when the materials are exposed to years of UV exposure and the elements.

Without limitation on any other provision of this Limited Warranty, Fiberon does not warrant for stain resistance resulting from spilled or otherwise applied substances that are not properly cleaned with soap and water or mild household cleaners immediately.

Fiberon warrants that the Fiberon Products are and will be, from the date of residential consumer purchase for the term coverage stated above, resistant to color change from light and weathering exposure as measured by color change in excess of 5 Delta E (Hunter) units provided that the Fiberon products were installed, cared for and maintained in accordance with the Fiberon written instructions and the Fiberon Care and Maintenance instructions found on www.fiberondecking.com and the conditions stated below.

Fiberon warrants that the Fiberon Products named above are and will be from the date of residential consumer purchase for the term coverage stated above, resistant to permanent staining resulting from spills of food and beverage items that would typically be present on a residential deck, provided that the Fiberon Products were installed , cared for and maintained in accordance with the Fiberon written instructions, the Fiberon Care and Maintenance Instructions found on www.fiberondecking.com and the conditions stated above .

Fiberon ArmorGuard® Decking, Veranda® ArmorGuard Decking and Railing, Fiberon Xtreme Decking, and Fiberon Xtreme Wide Decking

Fiberon® Horizon® Decking, Fiberon Horizon Symmetry™ Collection Decking, Fiberon ProTect Advantage® Decking, Fiberon ProTect® Decking, Fiberon Sanctuary® Decking, and Fiberon Good Life™ Decking

Fiber Composites LLC, individually and doing business as Fiberon (“Fiberon”), warrants the stain and fade resistance of the following products manufactured by Fiberon (“Fiberon Product”), to the original purchaser (“Purchaser”, “you” or “your”) for the warranty period set forth below under normal and proper service conditions, when properly installed and used as decking in residential applications, as long as the Purchaser owns the residence upon which the decking materials are installed.

PLEASE READ THIS WARRANTY CAREFULLY BEFORE PURCHASING, USING OR INSTALLING YOUR FIBERON PRODUCT. THIS WARRANTY IS A BASIS OF THE BARGAIN AND PURCHASE OF THE FIBERON PRODUCT AND SETS FORTH THE ENTIRE WARRANTY AND RESPONSIBILITY OF FIBERON. PURCHASE AND USE OF THE FIBERON PRODUCT CONSTITUTES ACCEPTANCE OF AND AGREEMENT TO THESE TERMS. SECTION 5 CONTAINS A BINDING ARBITRATION CLAUSE AND CLASS ACTION WAIVER THAT AFFECTS YOUR RIGHTS ABOUT HOW TO RESOLVE ANY DISPUTE WITH FIBERON.

Voiding Stain and Fade Warranty Coverage


1. Make a Claim

2. Submit a Claim


Claims and Notices must be sent to:

Fiberon Consumer and Technical Support Department181 Random Dr. New London, NC 28127 Phone 844-226-3958 | Fax 704-463-1750 | email [email protected]

To make a warranty claim, the Purchaser must send a copy of this warranty document, copy of original proof of purchase, and photos of the defective or nonconforming Fiberon Product to the address below. Such proof of purchase must be from an authorized Fiberon Product dealer and must show (1) the date of the purchase and (2) that sufficient Fiberon Product has been purchased to cover the number of lineal feet claimed to be damaged. All warranty claims must be received by Fiberon within the Warranty Period and in no event later than thirty (30) days after any discovery of a possible nonconforming nature of or other failure of the Fiberon Product or Fiberon branded fastener.

All warranties are void and excluded in their entirety in any of the following events:

• Failure to install, care for and maintain the Fiberon Products in accordance with the Fiberon written instructions, and the Fiberon Care and Maintenance instructions found on www.fiberondecking.com and the conditions stated below voids all warranties in their entirety.

• Use of abrasive compounds of acidic or basic pH, strong solvents, oil based paints or stains, metallic rust, concrete or masonry products, air or water borne minerals and other abnormal residential deck use items will damage the Fiberon Products and voids all warranties in their entirety.

• Direct or indirect contact with the Fiberon Products of extreme heat sources (over 250 degrees) voids all warranties in their entirety.

• Damaging, gouging, scraping or puncturing the surface of the Fiberon Products voids all warranties in their entirety.• Paint or applying other coating materials to Fiberon Products voids all warranties in their entirely.

Compliance with the Fiberon Care and Maintenance Instructions is required and a condition precedent to any warranty or warranty claim. Without limitation on any other provision of this Limited Warranty to qualify for coverage, you must have tried cleaning the affected area of your deck using the instructions indicated within this document and within the Care and Maintenance Instructions provided online at www.fiberondecking.com. If the affected area still remains unsatisfactory after you have tried these cleaning procedures, then you must have the affected area of your deck professionally cleaned at your expense. If the affected area remains unsatisfactory after the professional cleaning, you must contact Fiberon Consumer and Technical Support (800-573-8841) and provide proof of the professional cleaning within 30 days of the professional cleaning.

The limited warranty set forth in this Limited Warranty is the only warranty (whether written or oral, express or implied) Fiberon makes for your Fiberon Product or Fiberon Fasteners; it is subject to all terms and conditions stated herein and no one (including but not limited to a Fiberon dealer, installer, reseller, agent or employee) is authorized to modify, expand or add to this limited warranty. Fiberon makes no other representation, guarantee or warranty. No one is authorized to make any representation, guarantee or warranty on Fiberon’s behalf, and Fiberon shall not be bound by or liable for, any representation, guarantee, warranty, or condition with regard to any Fiberon Product or Fiberon Fastener other than as expressly stated in this Limited Warranty. THIS LIMITED WARRANTY COMPRISES FIBERON’S SOLE AND ENTIRE WARRANTY AND OBLIGATION IN CONNECTION WITH FIBERON PRODUCTS OR FIBERON FASTENERS. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, QUALITY, CONDITION, SUITABILITY, OR PERFORMANCE, ARE EXPRESSLY EXCLUDED AND DISCLAIMED. ALL IMPLIED WARRANTIES, INCLUDING MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, NOT EFFECTIVELY DISCLAIMED ARE LIMITED TO THE APPLICABLE STATUTE OF LIMITATIONS BUT IN NO EVENT WILL EXTEND BEYOND THE APPLICABLE WARRANTY PERIOD. FIBERON EXCLUDES AND WILL NOT PAY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. IN NO EVENT, REGARDLESS OF THE BASIS OF ANY CLAIM OR LIABILITY, SHALL FIBERON BE LIABLE FOR ANY DAMAGES, OF ANY NATURE OR DESCRIPTION WHATSOEVER, EXCEEDING, AND ANY LIABILITY SHALL BE LIMITED TO, THE ACTUAL PURCHASE PRICE OF THE DEFECTIVE PRODUCT AS ADJUSTED ON THE BASIS OF THE PRORATED WARRANTY SCHEDULE PROVIDED HEREIN.





In no event will Fiberon be liable for any direct, indirect, incidental, special, consequential, punitive, exemplary, statutory, special, or other, damages based upon the Fiberon Products or resulting, directly or indirectly, from any defect in the Fiberon Products, including but not limited to damage to, diminution in value of and/or loss of use or enjoyment of, any property or part thereof, whether based on contract, tort, strict liability, statute, regulation or otherwise, even if Fiberon is expressly advised about the possibility of such damages. Some states do not allow the exclusion or limitation of incidental or consequential damages in certain circumstances, so the above limitation may not apply to you.

In addition, this Limited Warranty does not cover and Fiberon shall not be liable for any installation, removal or reinstallation costs. Fiberon does not warrant against and is not responsible for, and no express or implied warranty shall be deemed to cover, any condition attributable to: (1) improper installation of Fiberon products and/or failure to abide by Fiberon’s written instructions and any applicable laws or building codes, including but not limited to improper structural support, fastening, ventilation or gapping; (2) use of Fiberon Products beyond normal use or in an application not recommended or permitted by Fiberon’s written instructions and applicable laws and building codes; (3) movement, distortion, collapse or settling of the ground or the supporting structure on which Fiberon Products are installed; (4) Defects in or failure arising from decking structure resulting from water caused by improper installation, workmanship, maintenance or repair; (5) any Act of God (including but not limited to flooding, hurricane, tornado, wind, earthquake, lightning, hail, etc.); (6) discoloration, fading, spotting or staining from or caused, in whole or in part, by mold, mildew, other fungal growth, organic materials, metallic oxides or particles (including but not limited to rust or corrosion of any fasteners), dirt, other atmospheric or environmental pollutants, foreign substances such as grease or oil, chemicals (including but not limited to those found in cleaners), or normal weathering (defined as natural efflorescence, exposure to sunlight, weather and atmospheric conditions which causes any colored surface to gradually fade, flake, chalk, or accumulate dirt or stains); (7) damage resulting from casualty, fire or exposure to heat sources such as cooking devices or retro-reflective surfaces; (8) the application of paints, stains, surface treatments or other chemical substances including but not limited to cleaners or pesticides; (9) fading, flaking or other deterioration of any paints, stains or other coatings placed on the Fiberon Products; (10) climate change, environmental conditions, static electricity or any cause beyond the control of Fiberon; (11) variations or changes in color of Fiberon Products; (12) improper handling, maintenance, storage, abuse or neglect of Fiberon Products by Purchaser or others; (13) ordinary wear and tear; (14) impact from objects; or (15) any fasteners not supplied or approved by Fiberon.

Purchaser’s Sole Remedy. Purchaser’s sole remedy, and Fiberon’s sole liability, for any claim whatsoever relating to the Fiberon Product, including without limitation any claims arising out of the marketing, purchase, installation, use, storage, possession or maintenance of Fiberon Products (whether such claim arises in contract, warranty, tort, gross negligence, negligence, strict liability, statutes or regulations or otherwise) or any claims that the Fiberon Products failed to perform as warranted above, is and shall be the replacement of the defective Fiberon Product with new Fiberon Product in an amount equal to the volume (linear feet) of defective material as listed on the Prorated Warranty Schedule contained herein. Replacement Fiberon material will be as close in color, design and quality to the original installation as reasonably possible, in Fiberon’s discretion and determination, but Fiberon does not guarantee an exact match as colors and designs may change. Additionally, Purchaser agrees to the use of such fasteners as adequate for reinstallation of the furnished board, irrespective of existing method. Fiberon may, at its option, elect to refund the percentage of the original purchase price listed under Recovery on the Prorated Warranty Schedule in lieu of replacing the defective product.


Upon discovering a possible defect of the Fiberon Product, Purchaser must make temporary repairs or cordon off the area at the Purchaser’s expense to protect all property and persons that could be affected. If needed, the Purchaser must allow Fiberon to enter the property into which the Fiberon Product is installed to inspect the nonconforming product. Fiberon must have made a determination on the warranty claim before any permanent repairs or removal of materials may be undertaken. No products shall be returned to Fiberon unless directed and authorized by Fiberon in writing to do so. Any removal or disposal of defective products shall be at Purchaser’s expense.









IF YOU AND FIBERON DO NOT RESOLVE ANY DISPUTE BY INFORMAL NEGOTIATION OR IN SMALL CLAIMS COURT, ANY EFFORT TO RESOLVE THE DISPUTE WILL BE CONDUCTED EXCLUSIVELY BY BINDING ARBITRATION. YOU ARE GIVING UP THE RIGHT TO LITIGATE (OR PARTICIPATE IN AS A PARTY OR CLASS MEMBER) ALL DISPUTES IN COURT BEFORE A JUDGE OR JURY. Instead, all disputes will be resolved before a neutral arbitrator, whose decision will be final except for a limited right of appeal under the Federal Arbitration Act. Any court with jurisdiction over the parties may enforce the arbitrator's award.



This section applies to any dispute between you and Fiberon relating to your Fiberon Product. “Dispute” will be given the broadest possible meaning allowable under law.

The suitability of the Fiberon Products for Purchaser’s property for the installation and use of the Fiberon Products, including but not limited to whether the Fiberon Product meets the requirements of any applicable building or safety code or similar regulation relating to Purchaser’s property, is the responsibility of the Purchaser and/or its design professionals, and not that of Fiberon. Fiberon does not provide architectural or engineering services. Fiberon makes no express or implied warranty or representation as to the suitability of the Fiberon Products for, or actual performance, capabilities or operation of the Fiberon Products at, Purchaser’s property or under the conditions of Purchaser’s use.

Without limitation on any other provision of this Limited Warranty, all warranties, whether express or implied, and including this Limited Warranty, are void if any one or more of the following applies or occurs: (i) the Fiberon Product is not installed, maintained and/or used strictly in accordance with Fiberon’s written instructions, and all applicable laws, codes and regulations; (ii) misuse of the product, whether foreseeable or unforeseeable; (iii) failure of proper and timely maintenance or repair; (iv) failure to provide timely notice to Fiberon of any failure or defect of the Fiberon Product; or (v) use of fasteners other than the Fiberon branded fasteners or approved hidden fasteners listed on fiberondecking.com to the extent that the Fiberon Product failures resulted from the use of non-approved fasteners.

Prorated Stain and Fade Limited Warranty Schedule

Recovery

20-Year Residential 25-Year Residential

Year of Claim Year of Claim

100% 0 - 10 years 0 - 10 years

80% 11 - 12 years 11 - 13 years

60% 13 - 14 years 14 - 16 years

40% 15 - 16 years 17 - 19 years

20% 17 - 18 years 20 - 22 years

10% 19 - 20 years 23 - 25 years

Choice of Law

Arbitration Procedure, Costs, Fees and Incentives


North Carolina law shall govern the interpretation of this Limited Warranty and any claim that Fiberon has breached it, regardless of conflict of law principles.

FIB–0293-LIT Rev C 0216

Any arbitration will be conducted by the American Arbitration Association (the "AAA") under its Commercial Arbitration Rules and in many cases it’s Supplementary Procedures for Consumer-Related Disputes. For more information, see www.adr.org or call 1-800-778-7879. In any dispute seeking less than $10,000 in damages, Fiberon will promptly reimburse your filing fees and pay the AAA's and arbitrator's fees if you are the prevailing party. You agree to commence arbitration only in your county of residence or New London, NC.

Fiberon, Paramount, Horizon, Permatech, ProTect Advantage, ProTect Advantage FR, Good Life, Symmetry, Sanctuary, Phantom and ClearVisionSystem are trademarks of Fiber Composites, LLC, registered in the U.S. and other countries.

MKT LIT PROD GUIDE 3/16

FIBERONDECKING.COM1.800.573.8841

Devices & Hardware

Fiberon Itemized Product Guide