Upload
houseofgemscom
View
790
Download
3
Embed Size (px)
Citation preview
How To Make: Twisted Beaded Pendant
Materials: 8 inches of 20 gauge copper wire, 4 glass beads – size 4 mm, 1 copper bead – size 4 mm
Tools: Round nose pliers, wire cutters
Step 1: Insert one bead onto the wire, then bend wires as shown in the photo
Step 2: Insert beads onto the wire, then wrap wires around them as shown in the photos
Step 3: Bend wires as shown in the photo
Step 4: Create two small loops, then cross wires as shown in the photo
Step 5: Insert copper bead onto both wires, then trim one of them
Step 6: Insert glass bead, then create final loop. Now attach chain, your necklace is ready to wear!