Oil and Gas application

WelesgardAnti-corrosion and protection coating systems

TM

Steel and concrete structures:•Operated in tough and hazardous conditions •Exposed to environments with high corrosion aggressiveness•Subject to abrasion, solar radiation, extreme temperatures and alternating mechanical and chemical stress

Welesgard provides reliable protective coatings solutions against corrosion: •Offshore fixed and floating platforms•Storage tanks for oil and gas•Pipelines underground, underwater and ground-laying•Various infrastructure facilities with extreme temperature conditions

Oil & Gas

Storage tanks for oil and gasWelesgard developed super reliable anticorrosion coating protection for internal and external sides of tanks, gas holders, etc.

•Exterior:WG FerogalvanicWG WeleflexWG Sulacover

•Interior:WG Weleforce

Advantages of Welesgard coatings for tanks:

•Exterior:One component polyurethane protective system Can be applied at high relative humidity of air (up to 99%) No restriction on a dew point.Low content of volatile organic compounds.Resistant to impact and abrasion.Remain flexible with time.

•Interior:High chemical resistance to oil products and produced waterHigh abrasive resistance

References :

Location Brody Oil TerminalProject Oil tanks 75 000 m3

Location Alchevsk steel worksProject Gas holders 100 000m3

References :

Location Feodosia oil terminalProject Tank farm of 37 tanks for oil products

Oil and Gas pipelines.

Welesgard has a series of coating systems designed for exterior and interior protection of pipelines, fittings, armature immersed in fresh or sea water, and also buried underground.

Advantages of Welesgard coatings for pipelines:

•Can be applied with a thickness up to 6 mm in one technological cycle without coating defects.•When applying by spraying the material is cured in few minutes•High adhesion to steel (>18 MPa)•Have a high impact strength (>20 J) •Abrasion resistance (100-130 mg loss of weight in 1000 cycles - 1 kg of load - wheel H-17).•Performs very high UV, water, chemical, corrosion resistance•More technological in comparison to other material•Meets requirements of ISO 10290 and other standards

References:

Location Caspian Sea OffshoreProject Pipeline offshore pipeline

Location Odessa Nearshore Project Gas pipeline system

References:

Location Black SeaProject Feodosia Oil Terminal pipeline system

Oil and Gas Offshore

Anti corrosion protection of different offshore fixed and floating structures. •Submerged zone •Splash zone •Atmosphere zone •Platform decks•Helicopter decks•Separators and pipes•Oil rigs torch lighter

Advantages of Welesgard coatings for offshore:

•One component polyurethane system•Can be applied at high relative humidity of air (up to 99%) •No restriction on a dew point.•Resistant to impact and abrasion.•Remain flexible with time.•Tolerant to surface preparation•Compatible with cathodic protection•Guaranteed life time in the open sea condition up to 30 years•Meets the highest international requirements requirements of Norsok M501 and ISO 20340

References:

Location Caspian SeaOperator LukOil

• References:

Location Caspian SeaOperator Petronas Carigali

Location North SeaOperator IHC Hydrohammer B.V.

References:

Location Caspian Sea, several projectsOperator Dragon Oil

High temperature applications

TERMA series for anti corrosion protection for very high temperatures operation environment. One component moisture cured silicon based coating systems.

WG-Termаprime up to +400°С.WG-Termafinish up to +700°С.

•Oil refineries•Gas compression stations•Oil rigs torch lighters•Furnaces

• References:

Location Reconstruction of Blast furnace #9 Operator ArcelorMital

Location Gas compression station Operator Tarutino GasTransit

«Rheinheim SA» is Welesgard® trademark ownerand international distributor.

Rue de la Servette 931202 Geneva SWITZERLAND

Tel: +41 22 501 7732sales@welesgard.comwww.welesgard.com