Upload
indiamart-intermesh-limited
View
483
Download
0
Embed Size (px)
Citation preview
“SAWANT HIGH VAC” established with an experience of more than 20 years in Vacuum Industries. Our highly motivated team of professionals sharply focuses on providing the finest service to our customers. Our product range is manufactured with latest technology and goes through strict quality supervision. With passions & dedication we work towards customer’s satisfaction.
Customers are always looking for one stop solution provider for all range, so we are dedicated to supply not JUST Vacuum Pump but the complete system and repair service too. Different technology from different people can miss something for final result. We understand our client & their requirement best so we provide complete system in many cases. Even we can consult for same if in need.
We Manufacturer & Supply Variety of Vacuum Pumps As listed below:
• Oil Sealed Rotary High Vacuum Pumps• Diaphragm Vacuum Pumps &
Compressors(Oil Free).• Water Ring Vacuum Pump.• Two-Stage Liquid Ring Vacuum Pumps &
Compressors.• Complete Vacuum & Water Ring
Recirculation Systems.
Oil Sealed Rotary High Vacuum
Pumps
SAWANT HIGH VAC” Oil Sealed Rotary High Vacuum Pumps are available in single & double stage models. These are oil sealed so named Oil Sealed Rotary High Vacuum Pumps & they are rotary vane type positive displacement pumps. These pumps are constructed such a way that not only complete assembly is immersed in oil but also shaft seal is designed in such a way that it totally eliminates the possibility of suction of air through it. These are designed to achieve maximum vacuum in a very short time.
While creating vacuum rise in temperature of the unit also remains under check, which in turn reduces the wear and tear of its components. “SAWANT HIGH VAC” Oil Sealed Rotary High Vacuum Pumps are suitable for noiseless and trouble free performance..
These pumps are very compact and are so simple in design that all minor repairs, in case of need, can be carried out easily without removing the main housing from its base plate and without disturbing the alignment.And In order to keep it cool, a jacket is constructed around three sides of the pump housing, in which water is compel to circulate for keeping the temperature of vacuum pump under control and retaining the performance at its best.
In this model an inbuilt device, known as Gas Ballast is provided, which effectively checks to a large extent condensation of the water vapours which otherwise would not only had contaminated the oil, but had also diminished the performance of the pump. cases. Even we can consult for same if in need.
Salient Features• High Efficiency• Elegant in Appearance &
Robust in Construction• Fitted with Inbuilt Air Ballast.• Thoroughly tested for designed
vacuum on McLeod Gauge.• Ready availability of spares.• Compact in Design & Minimum
in Weight.• Service after sales with one
year guarantee against manufacturing defects.
• Models up to V-12A are air cooled provided with single phase motors.
• Models V-13 onwards are provided with water cooling Jackets
AccessoriesThis is a one-way valve, to be fitted on the suction of vacuum pump. It is provided with a spring-tensioned rubber diaphragm.The diaphragm is pulled down due to suction of air when the pump starts and it blocks the port by spring-tension and vacuum, as soon as the pump stops and thereby prevents sudden back-flow of oil. This is for limited time only
It has a bourdon type gauge having range 0 to 760 mm of Hg. Suitable for rough indications only. The regulator is screw type which leaks atmospheric air into the pump and thereby maintains any desired vacuum in the system.
This is a metallic chamber covered with a removable glass top and is provided with an air admittance valve. A tray is also included for keeping hygroscopic material which absorbs moisture in the air before entering into the pump. This is advisable only in case of small systems having little moisture.
Vacuum Gauge with Regulator
Moisture Trap
Application• Evacuation Of Vacuum Systems • Vacuum Flasks • Bulbs, Neon Sign Tubes.• AC. & Refrigeration• Transformers,Vacuum Moulds• De-aeration• Filling,Drying,Forming,• Bright Anealing,• Filtration,• Distillation• Impregnation,• Leak Testing.
Water Ring Vacuum Pump
“SAWANT HIGH VAC” Water Ring Vacuum Pumps are available in wide range of sizes. These are designed in such a way that two-fold features of suction and pressure combination are possible in same unit. Hence the same unit can be employed for either function. When “SAWANT HIGH VAC” Water Ring Vacuum Pumps are used as vacuum pump, they can create vacuum up to 710 mm (28" Hg) provided the temperature of the sealant water is below 30°C.The main Body & other components are manufactured from Cast.Iron. except the main shaft, which is made up of MS / EN-8. However, we can offer Water Ring Vacuum Pump in various combinations of resistant materials for specific application.
A Water Ring Vacuum PumpB Flexible CouplingC Electric MotorD Base Frame.E Vacuum GaugeF Pressure GaugeG Isolation ValveH Air VentI Automatic Drain ValveJ Water Inlet ValveK Pipe LineL Non Return ValveM SilencerN Concrete PlatformO Coupling Guard
INSTALLATION LAY-OUT OF WATER RING VACCUM PUMP WITH STANDARD ACCESSORIES
Application Distillation Filtration Vacuum Drying Water Extraction from paper and cloth Evaporation & Crystallization Sizing for PVC Pipes Priming of Centrifugal Pumps Extruders Sterilizers.
Two Stage Liquid Ring Vacuum Pump
SAWANT HIGH VAC” Two-Stage Liquid Ring Vacuum Pumps & Compressors has construction is such that Two stages are connected in series to get backing action and increased efficiency. Each stage consist of independent impeller eccentrically housed in independent casing but mounted on a common shaft. Sealing at the stuffing box is either by gland packing or mechanical seal. Bearings areb at exreme ends and do not come in contact with liquid. This pumps can also be supplied to run as Liquid-ring Compressors Varing Capacity From 100 to 1000 m3/hr.
Application• Distillation• Filtration• Drying & Crystallization• Also as Tailgas• Evaporation• Biogas or Recycle Compressor
OIL FREE DIAPHRAGM VACUUM PUMP
“SAWANT HIGH VAC” Oil Free Diaphragm vacuum pumps & Compressors are available in single & double stage models. These are oil free so named Oil Free Diaphragm Vacuum Pumps. These pumps are constructed such a way that it does not require even a drop of oil. Still the performance is excellent with durability. In many applications these Oil Free Diaphragm vacuum pumps are highly appreciated.
A minute change in design of Oil Free Diaphragm vacuum pumps converts it in to Oil Free Diaphragm vacuum Compressors. Vacuum pumps and Compressors work on same principle but purely opposite in direction.
No Of StagesAirFlowCapacity (Lits/Min)
Vacuum(mm Of Hg)
Pressure (kg/cm)
Electric Motor(HP/Phase)
Approx Weight (kgs)
Approx Dimension(mm)
DP-1
One40
570
2.0
1/3Single
7.0
240 x115x190
DP-2
Two50
710
---
1/3Single
9.0
330 x115 x230
Material Of Construction
No of Stages
DP-1
One
DP-2
TwoHousing Aluminium AluminiumHead
Diaphragm
Aluminium/ Teflon Coated.
Rubber / Teflon Coated
Aluminium/ Teflon Coated.
Rubber/ Teflon Coated
Application• Filtration & Distillation• Chemical Analyzer• Pollution Monitoring Equipment• Desoldering Suction Station.• Labeling & Packaging Machines.
Salient Features• Oil Free• Low Noise Level• Light Weight• Compact & Portable• Practically Maintenance Free• Very Low Vibration• Lubricated Oil Bearing
We at “SAWANT HIGH VAC” believe in to be one stop solution provider for all range, so we are dedicated to supply not JUST Vacuum Pump but the complete system. Different technology from different people can miss something for final result. We understand our client & their requirement best so we provide complete system in many cases. Even we can consult for same if in need.LIQUID RING VACUUM PUMPING SYSTEMLiquid ring Vacuum pump complete with seal liquidclosed loop recirculation arrangement.Vacuum : 30 torrApplication : Fractional Distillation and Solvent Recovery
SAWANT HIGH VAC ” established with an experience of more than 20 years in Vacuum Industries. So our team has in depth knowledge for products manufactured and their problems after some working period. We believe in to provide complete service to client than to give JUST product. We give repair services for “SAWANT HIGH VAC” products as well as for other brands too.
Our Engineer can visit the site with nominal charges OR the pump can be sent to our workshop by client.We provide the estimate for the repair service (repairing) (Actual Bill may vary optionally according to actual service provided)After approval of estimation we provide complete servicing.In actual practice the client does not have issues only in the vacuum pumps, but the complete system may need proper upgrade. So we can consult for complete system too. Even the maintenance for complete system is possible.
SERVICE