Upload
mayur32
View
301
Download
0
Tags:
Embed Size (px)
Citation preview
UNIVERSAL JOINTSUNIVERSAL JOINTS
Universal joints provides simple and economic method of connecting to shafts whose axis are inclined at an angle. They are also used when the angle varies during rotation eliminating the need for the complicated and expensive. mechanism usually associated with this type of application. For both intermittent and continuosly rated joints where constant lubrication (such as oil bath) is not available, joint covered with once grease packed will take care of lubrication bearing etc. The use of universal joints avoids the necessity for pricise alignment there by considerably reducing assembly costs. Universal are frequently used in an agricultural textile, multi spindle drilling machine, VTL Lathe, S.P.M. Etc.
United Product Developers
S. No. 15/4, Mauli Industrial Estate, Gulve Vasti, Bhosari - 411 026. Cell : 9270951009/9028577975/9764886796, Email ; [email protected] Website : www.unitedpolygonturning.com
Mfg. Polygon Turning Attachment Universal Joints, Rubber & Plastic Dies, Jigs & Fixtures, Bandsaw Machine
Strip Type
Pin TypeBall Type
(Dia. 200mm)
Technical
1H.P., 3 Phase
1/8 H.P., 3 Phase
Maximum Bar dia. 200mm
Bi-Metallic 27x0.9x3 mtr.
Electric Motor
Coolant Pump
Machine Size
Cutting Range
Blade Length
Weight
FeaturersDia. 200 mm Dia. 250 mm Dia. 300 mm
1H.P., 3 Phase 2H.P., 3 Phase
1/8 H.P., 3 Phase 1/8 H.P., 3 Phase
1320 mm 1520 mm 1900 mm1320 mm
320 kgs. 370 kgs. 510 kgs.
Maximum Bar dia. 250mm Maximum Bar dia. 300mm
Maximum Flat 200mm x 180mm Maximum Flat 250mm x 230mm Maximum Flat 300mm x 280mm
Bi-Metallic 27x0.9x3330mm Bi-Metallic 34x1.2x3470 mm
United Product DevelopersS. No. 15/4, Mauli Industrial Estate, Gulve Vasti, Bhosari - 411 026. Cell : 9270951009/9028577975/9764886796,
Website : www.unitedpolygonturning.com Email ; [email protected]
Mfg. Polygon Turning Attachment Universal Joints, Rubber & Plastice Dies, Jigs & Fixtures, Bandsaw Machine
Horizontal Metal Cutting Bandsaw Machine
Blade But Welding Machine
Technical Featurers
Blade 25 mm to 40 mm width x 1.5 mm thick
440 V - 2 Phase - 15 KVA
660 mm length x 660 mm width x 375 mm Height
50 Kgs.
Stand
Capacity :
Electricity :
Size :
Weight :
Accessories :
ATTACHMENT MOUNTING
STANDARD ACCESSARIES : EXTRA ACCESSARIES :
PTA 25/40 : Can be mounted on any light duty old / new 4.5 Ft. Center lathe PTA 80 : Can be mounted on any medium duty old / new 5 Ft. Center lathe
Polygon Turning attachment (Standard side - 2,4,6,8,10,12),Cutter with 6 spockets , 125 true chuck.
Lever Operated quick change collect chuck A-25Lever Operated quick change collect chuck C-40
Polygon Turning AttachmentPolygon Turning AttachmentPolygon Turning Attachment
FUNCTIONThis attachment can be mounted on cross slide of Center Lathe or table of Milling machine; & any nos of flats on outside diameter either straight or taper can be Turned.(As shone TABLE : 1)Similarly slotson face are cut in one stroke without indexing E.G, Two, Three, Four,
Five, Six, Seven, Eight, Ten, Twelve etc.
ADVANTAGESCan operates by any manual operator.machine
Easy to Operate
No Skilled operatorrequired
Extremely Short piece time
Std. ISO inserts to be used to avoiding costly side & face cutters
Saving on cost of Components
Website : www.unitedpolygonturning.com Email : [email protected]
No Maintenance
TABLE : 1
GENERAL TECHNICAL SPECIFICATION OF POLYGON TURNING ATTACHMENT
FeaturesCapacity
Holding
Spindle
Description
Workpiece Diameter
Max. Turning LengthChuckColletteSpindle Bore
Model of Polygon Turning Attachment
PTA 25 / 40
40 mm
40 mm5"
C25 / C4032 mm
PTA 80
120 mm
60 mm8"
Chuck - 852 mm
Standard
Standard
StandardISO StandardISO StandardISO Standard
Category
Lever Operated quick change collect chuck A-25 Lever Operated quick change collect chuck C-40
LEVER OPERATED QUICK CHANGE COLLECT CHUCK