View
927
Download
2
Embed Size (px)
DESCRIPTION
1. Lateral Flow assay Coating Machine2. Western Blot Manufacturing Machine(16 pump)3. Robotic ELISA Plate processor4. Robotic dispensing Machine.5. Peristaltic Pump Doser
Citation preview
www.ubio.in [email protected] Ph: +91-484-2532966
ubio Biotechnology Systems Pvt. Ltd.
Life Science Equipments: Catalogue.
2011-12 XII/111-E/F, Biotechnology Incubation Center
Kinfra Hi-Tech Park, Kalamassery
Cochin, India 683503
Ph: +91-484-2532966, +91-9744122269
Email: [email protected]
www.ubio.in [email protected] Ph: +91-484-2532966
easyCoat100
easycoat100 is a low cost lateral flow assay kit production machine. This robust machine can be used for printing
lines and dots in various substrates. The standard machine has 3 pumps for line printing and one for conjugate
spraying. Additional pump options are available. The short length tubing of this machine reduces the reagent
wastage.
Specifications
Operating Range : X 550mm
Dispense area 100mmX550mm sheet, can accommodate card size from 50mm to 10mm width, and upto550mm length
Syringe pump 3 for line printing 1 for conjugate spraying
All syringe pumps are independently controllable.
Syringe 100µl(standard) other options also available
Nozzles PEEK nozzles and SS spray nozzle
Tubing Standard Teflon Tubing with Standard Connectors
Adjustments
Nozzle contact can be adjusted Line distance adjustable from 4 mm to 10mm Conjugate spray nozzle height is adjustable Nozzle contact angle is adjustable.
Contriols Full automatic and semi automatic models available
Accessories Vacuum pump cum air compressor
Power supply 220 - 240v 50/60 Hz supply
Warranty One year with parts replacement
Ordering Information
Cat. No Specifications qty
easycoat100 Semiautomatic with manual valve, 3 pump and conjugate spraying, with vacuum pump cum compressor
1 no.
Easycoat200 Full automatic with 3 pump and conjugate sprayer, with vacuum pump and compressor
1 no.
Installation in India (if required)
Accessories Kit(consist of) 1 kit
UEC-P1 PEEK nozzles 3 no. UEC-P2 Replacement tubes: to reservoir 10 no
UEC-P3 Replacement tube and connectors to nozzle 3 no
UEC-P4 Syringe 100 µl 3 no.
easyCoatWB
www.ubio.in [email protected] Ph: +91-484-2532966
easycoat100 is a low cost western blot production machine. This robust machine can be used for printing lines
and dots in various substrates. The standard machine has 16 pumps for line printing. Additional pump options
are available. The short length tubing of this machine reduces the reagent wastage.
Specifications
Operating Range : X 550mm
Dispense area 200mmX550mm sheet, can accommodate card size from 50mm to 200mm width, and upto550mm length
Syringe pump 16 for line printing
All syringe pumps are independently controllable.
Syringe 100µl(standard), other options also available
Nozzles PEEK nozzles.
Tubing Standard Teflon Tubing with Standard Connectors
Adjustments Nozzle contact can be adjusted Line distance adjustable from 2 mm to 10mm Nozzle contact angle is adjustable.
Controls Full automatic
Accessories Vacuum pump.
Power supply 220 - 240v 50/60 Hz supply
Warranty One year with parts replacement
Ordering Information
Cat. No Spec qty
EasycoatWB200 Full automatic with 16 pump 1 no.
easyCoat E ubio easycoatE is a low cost automated dispensing system for fluids to ELISA well plates. This can be used in
ELISA kit manufacturing line. Our standard model is a single axes system with 8 dispensing nozzle, stacker and
collecting tray with an average output of 100 plates per hour. The system operates through a personal
computer. Various dispensing attributes are programmable through the computer
Operating Range : X axes 800 mm
Repeatability 20 microns
Resolution 20 microns
Drive system Stepper motors
Computer interface Rs 232 C
Dispense volume 25-1000 microliter
Cat. No Spec
Easycoat E Standard Model : 100 plates per hour
easyDispense100
www.ubio.in [email protected] Ph: +91-484-2532966
ubio easy Dispense is a low cost automated dispensing system for fluids to well plates, tubes and tube arrays.
Our standard model UEDXY100 is a three axes system which has a dispensing area of 300 mm x 300 mm. The
system operates through a personal computer. Various dispensing attributes are programmable through the
computer
Specifications
Operating Range : X & Y axes 300 mm, Z axis : 100 mm
Dispense area 300 x 320mm
Repeatability 20 microns
Resolution 20 microns
Drive system Stepper motors
Computer interface Rs 232 C
Dispense volume 1-100ml
Cat. No Spec
UEDXY100 Standard Model with XY and Z movement
easyDoser
ubio offers range of peristaltic pumps for dispensing, filling,
dosing, sampling and transferring applications. The flow rate will
be accurate and there will not be any reverse flow or back flow.
Our equipment is ideal to use with corrosive or viscous liquids.
Instant start or stop and reverse facility is available in our
standard model. Various models of Dosing pumps are available
from ubio for accurate, positive displacement of fluids with
precision controls. These pumps are programmable through the
front panel with keyboard and display interface. We manufacture single & multi channel pumps working in
rotary & linear mechanisms. Peristaltic pumps do not contaminate fluids as none of the pump components
comes in contact with the fluids other than the tube. ubios peristaltic pumps are inexpensive to maintain and are
easy to install and operate. The Doser is available with single channel to upto six channel for dispensing.
►Variable speed drive
► Contamination free pumping
► No reverse flow or back flow
► Accurate and repeatable flow rate
► Instant start or stop facility
► Complete isolation of pumped fluid
► Ergonomic design, Ease to use
► Almost maintenance free
► Clear, easily read LCD illuminated disply
Flow rates
: 0.25 to 50 ml/min
Accuracy : +/- 1.5
Speed : 0.2 to 5 rpm
Motor : Stepper Motor
Remote : Stop / Start
Power supply
: 220 - 240v 50/60 Hz
Cat. No Spec
UED1 Single channel
UED2 Two channel
UED4 Four channel
UED6 Six channel