Upload
adrian-sommerville
View
982
Download
0
Tags:
Embed Size (px)
Citation preview
TME Group Overview
The TME Group provide specialist services to the mining and oil & gas industries, where the
strengths of our long history provide both a wealth of experience and client satisfaction that
they are dealing with an organisation that has strong resources.
TME has been involved in both the mining and oil & gas industries over the years, and is supported by our team of technical and strategic specialists, who have experience in all areas of the industry, including: • Engineering Design• • Fabrication• • Construction• • Mill Installation and Relines• • Fabrication of Reline Liner Handler Machines• • Project Management and Engineering Support• • Administration, Payroll and Recruitment• • Collaborative Contracting The TME Group has been in operation from 1952 with extensive experience gained in providing Structural, Mechanical and Piping (SMP) services, as well as Mill Installation and Reline Services. The TME Group have workshop and office facilities in Geraldton, Perth, Kalgoorlie, Cairns, Hobart and South Africa, with the capacity to mobilise to site on relatively short notice. The TME Group utilises a dedicated internal recruitment service, where the prime responsibility is to ensure that all required personnel are sourced, pre-qualified and are job ready to commence work when required to do so. The low turnover rates we experience is a testament to the level of service provided to both the Client and our field personnel. The capacity of TME is underpinned by the fact that there are in excess of 450 personnel currently employed, with the capability to extend well beyond this figure. TME have undertaken national and international contracts, where there has been a requirement to provide experienced personnel and equipment, and have the strength and stability required to undertake projects in the current market environment. The work we undertake encompasses all aspects of the project, from initial contract start-up through to commissioning and post commissioning support.
Engineering
The TME Group can provide “Whole of Project” services, that include Feasibility and
Design of projects, including Engineering, Procurement and Contract Management
(EPCM), as well Engineering, Procurement and Construction (EPC), so as to ensure that
the client’s requirements and
quality management is maintained at a high level throughout the project.
The TME Group, in conjunction with our Alliance Partners, can provide range of engineering services, and has the
ability to work with the client as part of an integrated working alliance.
• Skills that can be provided to the client include:
• Engineering Design
• Design Drafting and Drafting Management
• Procurement
• Contract Management
• Project Management
• Sub-Contractor Management and Collaboration
Fabrication
The TME Group have fabrication workshops in Geraldton, Cairns, and alliances in Perth
and Thailand, and have the ability to provide cost effective and quality output, whilst
maintaining a strong presence in Australian based engineering and project management,
thus providing the client with a high level of representation.
The TME Group’s distinction lies in the areas of:
• fabrication of platework, piping and structural steel
• equipment management,
• supply of skilled personnel
• exotic welding capability
• project management
• specialised equipment manufacture
Construction
TME can provide services to clients by way of managed works packages, installation only, or based on full construction management, including supervision / management of sub-contractors based on a vertical packageof works.
All TME Construction Managers and Supervisors hold the appropriate level of qualifications,
have extensive experience in their respective fields, and have received the full suite of Systems training and Project
information briefings.
Senior project personnel are formally introduced to the client prior to the commencement of
each project.
Construction
• capability range – contract values up to A$40M
• structural steel erection
• conveyor galleries installation and commissioning
• pipe installation
• crusher installation
• thickener and tank installation
Plant relocations
• dis-assembly and re-assembly of complete plants
• refurbishment of plant and structures
• reconfiguration of plant to suit new application
• modifications to meet new process requirements
• refurbishment and reinstallation of mills and crushing plants.
Maintenance
• mine and process plant breakdown and routine maintenance
• installation or modification to operating plant
• assistance with teams or individuals for emergencies or planned shutdowns
• capability for immediate response to emergency situation.
Mill Installation and Relines
TME Mill Relines specialises in grinding mill liner changes, new installations and the decommissioning or dismantling of plant and equipment.
It has an international reputation for its highly disciplined and systematic focus on reducing mill downtime, as well as the
unrivalled skill and worldwide experience of its supervisors and work teams.
TME prides itself in the unmatched depth of experience and the commitment to continuous
improvement of it’s Reline division. Many of our personnel have worked together for the better part of
a decade, proving that our employees are happy with the way TME operates and the way our
supervisors lead their teams.
It is our aim to be a value-added service provider and view ourselves as a partner with the client in
the management of Critical Path - not just another contracting company.
We offer our expertise in:
• Planning
• Monitoring
• Evaluating shutdowns
In our continuous push to reduce reline incurred downtime.
Our teams are held in high regard throughout the industry and have a reputation for expediency,
innovation and safety.
Our teams are equipped to supply professional reline services whenever and wherever required.
Core Benefits include:
• Continuous Improvement Program
• Qualified liner handler operators
• Highly experienced trained supervisors
• International reputation for excellence
• Specialised equipment
• Safety Management Personnel with every Reline
Central to this capability is a TME-developed software program, Short Interval Control.
This provides a comprehensive guide to efficient shut-down management. It identifies a critical path for
planning and scheduling tasks to be completed during a shut down and real-time information on parts moved,
mill turn time and estimated completion time.
This facilitates maximisation of available resources and minimises mill down-time.
This information is presented in user-friendly tables and graphs that have both on-site applications during a
shut-down but also assist in post-reline analysis and the continuous improvement of procedures and
processes used on a particular project.
On completion of every mill reline TME provides a detailed report of the process undertaken with
recommendations as to any improvements that could be made and any relevant suggestions
regarding maintenance or the timing of future relines.
This enables TME Mill Relines to be considered a value-adding partner rather than just a contractor on mill
reline projects.
Their focus on efficiency, innovation and safety is a product of TME’s vast collective experience in mill relines,
and of working together for lengthy periods.
This is complemented by unrivalled practical knowledge and skills as well as detailed understanding of the
characteristics of particular sites or plants.
TME understands that the relining of mills is a critical path project, of which any downtime of the mill can
reduce the profitability of the mining operation. As a result of this, the TME Group works with clients to purpose
build Mill Liner Handler Machines, so as to enable an efficient reline of the client’s mill.
The Mill Liner Handler Machine is a TME Group proprietary design, which sits outside the mill shell, with a
telescopic boom to manoeuvre the mill liners into position.
By default, the Mill Liner Handler Machine also reduces the potential for injury in the workplace, thus assisting
the TME Group and our clients work towards the goal of Zero Harm.
In addition, the TME Group is developing a World First training program, Certificates I, II and III in Mill Lining,
which will be a comprehensive training program for mill relining personnel. This training program will focus on
the skills, professionalism and safety requirements required to undertake an efficient and safe mill reline.
Project Management and Engineering Support
TME’s employees include administration staff, structural/mechanical engineers, supervisory
personnel, estimators, quality advisors, boilermakers, riggers, crane drivers, mechanical
fitters and storepersons, with access to engineering personnel as and when required.
TME’s capabilities can add a new dimension to the development of new projects, due to our ability
to provide a focus on the outcome of the project.
TME has extensive contract management experience, knowledge and expertise providing the necessary capabilities to
ensure complete project management from concept to commissioning. This can include engineering design, CAD
drafting and equipment procurement as part of a
total package.
This capability combined with our well-established fabrication, erection and installation experience enables TME to
provide cost effective, efficient project management and project implementation solutions.
Over the years, TME has built a reputation as an employer of choice, which has allowed us to
provide the following level of support:
On Site Services
• Construction Management and Supervision: all trades.
• Industrial relations management.
• Trade labour resources, supply, administration and logistics management.
• HSEC competency and compliance.
• Quality Management and related services.
• Cost engineering, including management and related audits.
Support Services
• Labour resourcing and logistics:
• Procurement
• Construction Planning and Scheduling
• Document Control
Human Resources & Labour Hire Division
The TME Group has been in operation for 59 years, and during this time
has consistently employed in excess of 60% of each project workforce from previous
Employees.
The labour hire division of TME Group is a fully resourced business unit with recruitment offices in Geraldton,
Perth, Kalgoorlie and Tasmania. The team is made up of Industry Specialists able to mobilise personnel on
relatively short notice.
TME specialises in supplying tradespeople and semi skilled labour for a wide variety of resource projects and
contracts, mill reline services and workshop environments.
TME hires directly to ensure all personnel are equipped with industry tickets and qualifications to fulfil your labour
needs. TME are dedicated to supplying experienced labour, with over 60% retention for each project workforce,
with this number is expected to grow.
TME believe that this policy provides direct control, helps to maintain contact directly with the employee after the
conclusion of each contract, and conveys the message that employees work as part of a team environment.
TME utilises internal resources to maintain our database, drive project recruitment and assist with the logistics of
mobilising personnel to site, rest and recreation periods and demobilisation.
TME recruitment processes are conducted in accordance with best practice, to ensure that all prospective
employees have been interviewed, reference checked, qualified and deemed fit for work, prior to mobilisation to
site.
TME has a Human Resource Management Policy, which includes policies relating to personnel management,
project supervision and industrial relations, including dispute resolution and on-site agreements.
TME has a policy of consistent communication with field personnel, which has resulted in high levels of productivity
and minimal disruption on project work.
All personnel will be paid in accordance with market rates, and will adhere to any standards set by the client.
Registered Training Organisation (RTO)
The capabilities of TME Group are based upon the abilities of our people, so training and
development of our workforce is given high priority. As a Registered Training Organisation,
our Safety and Training Division provides safety management services, both on and off site,
and industry specific and nationally recognised training programmes.
TME Safety and Training Division comprises of trainer assessors and safety officers, supported by a team of
qualified QA/QC officers and an experienced team of site supervisors.
Safety and Training courses and be provided as common industry based, or specifically designed to suit the client
needs. All safety and training can be undertaken either on site or at an off site location.
TME is an international player with an Asia Pacific focus, able to offer bilingual training (Mandarin/English), tool box
interpreting and translation services. This enables TME to support our clients’ ever diversifying workforce.
Training and Development
TME takes a hands on and committed approach to training and development. Courses available range from skills
recognition programmes for individuals to courses catered to meet the specialised needs of larger organisations.
With our team of qualified and experienced personnel, the TME Group can provide training such as:
• Dogging
• Rigging
• Elevated Work Platform
• Confined Space Awareness (CS1)
• Enter Confined Space (CS2)
• Safety for Supervisors (S1, S2, S3)
• Certificate II in Metalliferous Mining Operations (Open Cut & processing)
• Certificate III in Metalliferous Mining Operations (Processing)
Safety is at the centre of our value system and operational philosophy and with its secure status as a Registered
Training Organisation (RTO) TME is a proactive educator and safe work practitioner.
Indigenous and Community Employment
The TME Group is very proactive in our approach to Indigenous
Employment, and plays an active part in the training and development of the
local Midwest Indigenous Family Groups.
The TME Group is a Registered Training Organisation, and is proud of our reputation in assisting
indigenous candidates obtain extra skills and qualifications, which enable our participants to become “Job
Ready”.
The TME Group is a member of the Bayalgu Training Program, which in conjunction with the
MMG Golden Grove Mining Operations, provides on the job training and skills to further their
career development:
Golden Grove General Manager Mr Nick Mosenthal believes the program is an important
development tool for local Indigenous youth.
“The Bayalgu program plays a valuable role in providing Indigenous Australians with a
range of entry-level work readiness skills and competencies to enter the resources, civil construction
and associated service industries,” he said.
The program takes a holistic approach and includes safety awareness training, small machine
operation, a live work road construction project, an industry work placement,
and job preparation activities including resume, cover letter and interview training,”
said Mr Mosenthal.
In addition, the TME Group believe that Community involvement, as participants of our workforce,
produce a net positive effect on the way we perform our range of services.
Where our projects are of an international nature, the TME Group will actively seek local involvement
where practicable.
Our Delivery Approach
HSEC: Competency and Compliance
TME maintains a comprehensive Health, Safety and Environment Policy, which is managed by
a dedicated HSE Co-ordinator.
On each project, subject to size, TME will appoint a full time resource to manage the on-site
HSE functions, including incident and injury management, daily start up meetings and regular
tool box meetings.
TME undertakes comprehensive reporting of HSE statistics, JSA’s, Quality Management and
Related services.
As a critical aspect of any project, TME will undertake a Risk Management Assessment, from which will be developed a
Risk Management Plan.
The Risk Management Plan will be developed in conjunction with the Client nominated HSE Representative, and will form
the basis of any Job Safety Analysis (JSA), Job Hazard Analysis (JHA), Contractor induction (internal) processes, and
project safety recording requirements.
Subject to the size and duration of the project, TME can allocate a full time HSE Co-ordinator.
Labour Resourcing and Logistics
TME has a dedicated Labour Resourcing Team, who recruit personnel for each project.
The TME Recruitment team are made up of industry specialists, who reside in the following offices:
• Geraldton, Western Australia – Three (3) Personnel
• Perth, Western Australia – Four (4) Personnel
• Hobart, Tasmania – Three (3) Personnel
• Cairns, Queensland – One (1) Personnel
In addition, the TME Perth Office has in residence a Chinese Liaison Manager, who speaks and writes in fluent Mandarin,
following nine (9) years of extensive study in China and Taiwan.
The TME Group resources personnel from an extensive Australian and International database of industry focused
personnel, who are managed on site by qualified and experienced supervisors, as part of our project management team.
Our Delivery Approach (continued)
TME recruitment services are centred on the individual requirements of the project, such as the
competencies required, medical standards, location, etc.
Subject to the specific requirements of the project, the Labour Resourcing Team will ensure that each
nominated person shall have a full brief of the project requirements, have been assessed and site
conditions have been provided.
The Labour Resourcing Team will manage all skills assessments (i.e. weld assessments), medicals and
logistical requirements, such as tooling and equipment.
Technical and Professional Personnel
The TME Group has dedicated resources to ensure that specialist personnel required for both projects
and technical based contracts are recruited by the most efficient methods of Search
and Recruitment.
TME utilises as strong network of relationships with existing and potential technical personnel,
and has established alliances with services providers, where a “win/win” solution can be provided
for the client.
Some of the areas that the TME Group has provided, as a direct source or by technical alliance, include:
• Design Engineers
• Project Engineers
• Project Management
• Procurement Personnel
• Planning and Scheduling
• Project Controls
• HSE Specialists
• Document Control
Our Delivery Approach (continued)
Procurement
TME utilises national procurement strategies, based on a competitive procurement process. Where projects
have been set up as Schedule of Rates (SOR) or Cost Reimbursable, any agreement to purchase goods
shall be discussed with the Client beforehand, so as to ensure that only approved vendors are utilised.
All purchases are undertaken by dedicated purchasing personnel, who will work in conjunction with the
TME on-site nominated person, thus ensuring that any on site purchasing is supported by a professional
team, who will negotiate service and supply agreements, and pre-qualify all suppliers, thus ensuring that
goods arriving on site are only supplied by reputable and Standards aware companies.
These services include:
• Vendor Management;
• Provision of Goods and Services;
• Fabrication and Material Supply;
• Equipment Management; and
• Subcontractor and Prequalification Management.
Construction Planning and Scheduling
At the tender / contract development stage, TME will review the Client supplied Schedule, to ensure that our
constructability schedule will align with the schedule agreed to with the Client.
Where there is a change in milestone dates, TME will immediately discuss with the Client any material
effect this may have on the Project, and if so, what the requirements are to ensure adherence to the
timeframe as outlined in the original schedule.
The TME Capital Works Supervisor, in conjunction with the Team Supervisors, shall compile daily work
records, which shall be aligned with the schedule, and presented at Client Progress Meetings.
Our Delivery Approach (continued)
Quality Assurance
As part of the construction process, TME shall develop a Project Quality Management Plan, which will operate in
conjunction with the Project Execution Plan. Both plans shall be submitted to the Client or approval prior to
implementation, and all relevant personnel shall receive a comprehensive briefing as to the content and operation of the
plans.
TME has achieved and operates in accordance with ISO 9001:2008, and ensures strict compliance with the relevant
Australian or International standard or code for work procedures.
All document control is managed in accordance with the above standards, and is kept both on-site and in a central, off-
site location for back-up and security purposes.
Any variations to the original Scope of Works or Contract shall be approved prior to commencement of the task, with
copies of all approvals being submitted as part of the invoicing procedure.
Cost Engineering
TME has the capacity to secure the best value from a project by considering the whole range of cost and risk inputs.
We bring an inherent understanding, gained through experience, of the costs of particular projects, from our experience
in project delivery. TME utilise Project and Cost Engineering personnel to ensure that all project costs are captured.
TME provides full transparency for reimbursable contracts, during which our Cost Engineer will monitor all captured
costs, and manage this on behalf of the client.
Document Control
TME maintains our Document Control section to the highest standard, with our Document Control Manager ensuring
that full levels of traceability are available, in accordance with both our quality procedures and the client’s specific
requirements.
TME’s document control system ensures that each project is maintained with the appropriate levels of authority so as to
enable full client confidence that both security and uniformity have been maintained.
TME uses a modern document control management system, allowing the TME Project Document Control Specialist to
remain the Gatekeeper of project documentation, so that the flow of information is controlled, recorded and has fast
delivery.
Recent Projects
Incitec Pivot – Phosphate Hill
Phosphate Hill is located in Central North Queensland, South of Mt Isa.
As part of an overall Major Shutdown, the TME Group was contracted to perform fabrication, installation and project
management services, consisting of the following works:
• Fabrication of one Stainless Steel Re-Slurry Tank
• Demolition Management of the Existing Re-Slurry Tank
• Installation of the New Re-Slurry tank
• Demolition Management of the Refractory Brick and Rubber Lining of the Reactor No. 2 Tank
• Fabrication and Lining of the Reactor No. 2 Tank with Alloy 31 Plate
The engineering of this new type of lining was a major step by Incitec Pivot to improve the life cycle value of the
Phosphate Hill Reactor Tank, and the amount of fabrication and welding of Alloy 31 for such a use was a World First
Project.
Luzenac – Three Springs Talc
Three Springs is located approximately 200km North of Perth in the Midwest Region of Western Australia,
and was the installation of a New Talc Plant, which involved the following areas of work:
Structural Erection• Erection of the Crusher Station• Erection of Conveyors CVN01, CV20, CVN04 & CVN05• Erection of Double Deck Screening Station• Erection of Sample Tower & Sample Lump Crusher Steelwork• Installation of Barrier Railing and Walkway Shelter
Mechanical – Miscellaneous Works• Vibrating Grizzly Feeder• Jaw Crushers• Conveyors• Rockbreaker• Triple Deck Vibrating Screen
Piping Installation• Installation of manifolds and piping spools• Plant water distribution pipe work and associated valves
The TME Group were able to ensure that the project was consistently maintained both ahead of
time and budget.
Recent Project (continued)
Dept of Defence – A380 Project
The Department of Defence has, as part of it’s training assets, a mock-up airplane for use in anti-terrorist training
scenarios. As part of it’s commitment to ongoing relevant training, the Department commissioned the design and
upgrade of one of it’s existing assets, so as to resemble an A380 aircraft.
The TME was awarded the contract to fabricate and install
the structural steel required to ensure that the training facility
withstands the rigours of extensive use.
As an adjunct to the contract, the TME Group also assisted
with the layout design, thus allowing for a seamless transition from
an existing mock-up, to allow for the addition of the A380 layout.
The works included strengthening of the lower fuselage, so as to
accommodate an extra 16 tonne of structural steel to be installed
as a new upper deck. This involved the rolling and fabrication of
upper deck ellipses, which were installed with minimal tolerance to ensure a realistic outcome.
Tiwest Chandala – SR10 Shutdown
Tiwest undertook a major shutdown for the Chandala Synthetic Rutile Plant, which operates north of Perth, near
Muchea, Western Australia.
The aim of the 35 day shutdown was to refurbish the Kiln, and to undertake major critical path maintenance for
the remainder of the site.
The TME Group were tasked with the following works:
• Removal and replacement of tanks and tank components
• Structural Steel Repairs
• Pipework Removal and replacement
• Mogenson Screen Removal and replacement
• Hopper repairs and replacement
• Chute repairs and replacement
Office Locations
Head Office
86 Flores Road
Geraldton 6530 Western Australia
T + 61 8 9921 3166
F + 61 8 9249 9444
Perth
Unit 4/471 Victoria Road
Malaga 6090 Western Australia
T + 61 8 9249 9444
F + 61 8 9249 3900
Kalgoorlie
72 Chaffers Street
Boulder 6432 Western Australia
T + 61 8 9093 1722
F + 61 8 9093 2425
Cairns
15 Johnston Street
Stratford 4870 Queensland
T + 61 7 4055 1705
F + 61 7 4055 2887
Hobart
39 Tower Road
Newtown 7008 Tasmania
T + 61 3 6228 0313
F + 61 3 6228 0315
Rustenburg (S.Africa)
Business Unit B
Delta Place
17 Kgwebo Avenue
Mabe Business Park
Rustenburg SA 0299
T + 61 8 9921 3166
F + 61 8 9249 9444
(All enquiries to Head Office)