Tips for Making your Room Air Condit ioning Units Ef f iciently Working

Is your room’s AC properly working? Or is it working but it’s costing you too much? Well, you need to know some wise tips on how to make it work cost-efficient. Poor maintenance and lack of knowledge on how to keep your ac at its peak condition and performance can really give you a headache. So to ensure that it is always working at its best, here are some tips to consider.

• Your AC unit must be installed in a proper level. This way, the drainage system inside and other mechanism can operate efficiently. If possible, it will be best if the unit is installed in the shaded part of the house. This is because direct sunlight can interfere with the unit’s heat exchanger efficiency as much as 10%. If the location intended for the unit’s installation is not shaded, you can plant trees or shrubs to shade the AC system. However, make sure that it will not block the airflow.

• The fan speed must be set on high but not in humid days. During humid days, the fan speed must be kept low for more comfort. Low speed fan will cool the room better and will eliminate more moisture from the air. This is because of the slower air movement in the AC system. For better performance, it will be best to use an interior fan together with the window air conditioner in order to circulate more and spread cool air throughout the room. This will also help in minimizing your power consumption.

• Set the thermostat as high as possible during the summer season. The less the difference of the indoor and outdoor temperatures, the lesser your cooling consumption will be. An important tip is to not set the thermostat at a slighter setting than normal when turning on the AC system. This will not cool the room any faster and will most likely result to overcooling the. This is in the end will result to an increase in your power bill.

• Never place lamps, televisions and other heat generating appliance near the thermostat. The thermostat can sense the heat and can cause the system to run longer than necessary.

• Proper maintenance is the key to keeping a highly efficient AC system. This will also save energy.

• As the cooling season is approaching, check the seals between your AC and the window frame. Check for leaks and make sure that they are tightly in contact with the unit’s metal case. Leaks are the usual culprit of a poorly functioning AC so be sure to make necessary inspection.

• Inspect the AC filters regularly like once a month. Clogged filters cause the system to work harder than usual thus causing it to perform poorly. Clean or replace filters when needed. A clean filter can help minimize your cooling cost as much as 5% to 15%.

• Check the drain channels for some signs of clogs. Clogged drainage hinders the unit from eliminating humidity and the resulting excess moisture can discolour walls and carpets. So make sure that the drains are clear from clogs.

For more wise tips on cooling and heating systems, check out heating and cooling San Antonio. Get professional advice and learn the best ways to keep your HVAC at its peak per formance from air conditioner service San Antonio.