Thermo S

Ceramic based heat reflecting coat Product introduction

Liquid ceramic-based thermal insulation coatingLiquid ceramic-based thermal insulation coating

The Thermo-S nano insulation coating significantly outperforms the thermal conductivity and heat transfer properties of the known conventional insulation materials and therefore its use provides a professional and innovative solution for a wide range of situations.

Through the Hungarian developed and manufactured Thermo-S product line Hungarowatt Ltd. would like to contribute to the conservation of our natural resources and to the sustainable development of humanity. Our aim is to rationalize energy consumption and to provide the opportunity to live in a healthier environment.

Thermo-S technical informationThermo-S, UniPress, Front, FrontPress, Metal, MetalPress,

Eco – liquid ceramic-based insulation coating

Appearance, Color: White, viscous coatingViscosity: thick, viscousSuspension density: 500-550 kg / m3Hardened material density: 290- 319 kg / m3Base: WaterColorability: Water-based colourants, up to a

maximum of 0.5%Dilution: with water, up to a maximum of

3%Fire protection class : A2 -s1, d0pH: 8,5-9,5Thermal conductivity (20 °C-on), λ: 0,003 W/mCHeat-reflection, white: 92%

Water absorption after 24 hours, on the surface: 0,03 g/cm3

Usability temperature: from -60°C to +180°CDrying time at 20 ° C: can be repainted after 1 hour,

complete drying of an 1 mm layer is 48 hours

Water vapor permeability: 0,2 Sd (Sd<0,5 m = water vapor permeable)

Coverage: 1 liter / 1 m2 / 1 mm (dry film thickness)

UVB stability: UV stableLife span: 15 yearsAdhesion: Plasters: 0,92 Mpa Brick : 0,92 Mpa

Metals : 0,90 Mpa Wood: 0,94 Mpa Plastics : 0,92 Mpa

Thermo-S technical information

•Thermal insulation of interior walls•Elimination of thermal bridges•Thermal insulation of exterior walls•Facade insulation•Facade insulation of historic buildings•Thermal insulation of cold storage, refrigeration containers•Prevention of mold growth•Industrial building insulation•Thermal insulation of heating and cooling systems•Tank and pipe insulation•Insulation of the pipes of district heating.•Insulation of metal surfaces and roofs•Heat insulation of metal containers

Areas of use:Areas of use:

The EMI conducted Bacteria and Fungi inquiry on the Thermo-S product in accordance with EN ISO 846:1999 standard.

The mold resistance test results show that the Thermo-S insulating coating material may not be attacked by fungi and do not contain usable nutrients for fungi. The Thermo-S thermal insulation coating is therefore classified as fungi resistant.

In the carried out bacterial resistance tests it was found that the Thermo-S thermal insulation coating does not contain usable nutrients for bacteria. The Thermo-S insulating coating is therefore classified as resistant to bacteria.

The coating of the walls kills the mold and improves the moisture control.

Reduction of allergies and asthma by termination of the mold

Usage of Thermo-S improves the comfort of the home or office by elimination of humidity caused by cold walls and cold bridges.

Thermo-S FrontPressThermo-S FrontPressApplied with Airless spray paint gun

Thermo-S FrontThermo-S FrontApplied with iron fillerApplied with iron filler

Microscopic examination(400X)Microscopic examination(400X)

Thermo-S FrontPressThermo-S FrontPressApplied with Airless spray paint gun


Comparative studyComparative study

„ competitor's product 1” applied with Airless spray paint gun

Competing productsCompeting products


competitor's product 2 competitor's product 3

competitor's product 1 applied with brush

competitor's product 1 spray painted

Thermo-S performaceThermo-S performace

Image captured with an thermal imaging camera.Image captured with an thermal imaging camera.

Thermo-S performaceThermo-S performace

Thermal imaging capture presented on a graph.Thermal imaging capture presented on a graph.

Thermo-S advantages over the competition:

The product is made in the European Union (CE)

The product meets A2-s1, d0 fire classification (Euroclass) in case of an 1 mm layer. This rating is unique in this thickness.

Above 1 mm layer thickness the fire classification is C2-s1,d0. The competing products do not meet this rating.

Due to greater percentage by weight ratio of ceramic spheres the insulation properties of the Thermo-S product family is better than the measured values of the competing products.

Even in case of relatively small orders we’re able to produce the product specifically for the customer’s needs.

The products labeled as Press are manufactured using high resistance ceramic balls and are able to withstand up to 300 bar.

Thermo-S advantages over the competition:

Due to to the high resistance to pressure the Press product line can be applied by airless technology.

The airless spray techology significantly reduces the work time.

The shortened spraying workflow leads to significant savings compared to conventional coating technology.

With airless technology it is possible to coat 1000-1500 m2 per day, after an appropriate surface preparation.

Significant inventory, flexible delivery from stock at short notice.

Our products have a specific gravity of about 50% less than major competitors.

Using the product will not cause significant increase in structural load.

Thermo-S advantages compared to conventional insulation technology:

Simpler application technology compared to traditional insulation.

Time saving fast application.

Require fewer hours of work per unit area, cost-effective.

Insulation of facades with complicated geometry, eg.: Monuments, silos.

Suitable for thermal insulation (retrofitting and renewal) of existing buildings.

The product itself may be colored so follow up painting not required, this results in labor and material savings.

Can be used both indoors and outdoors.

Eco-friendly product.

Thermo-S product family

Thermo-S Basic – Primer for walls:

A primer specifically developed for Mahlmart products. Its usage increases the surface adhesion and forms a durable bond between the layers. Suitable for exterior and interior use.

Thermo-S Eco – Interior insulation:

The binding material makes it ideal for the thermal insulation of indoor walls and interior metal surfaces. Due to its consistency it can be widely used and it has excellent adhesion. Areas of use: Thermal insulation of interior walls, interior insulation of thermal bridges; on concrete, gypsum, precast concrete panels and lime, cement or gypsum based plasters. Also ideal for the insulation of interior metal surfaces, heating and cooling systems, tanks, pipes and fittings.

Application:

Paint brush, paint roller, iron filler, standard spray equipment


Thermo-S Uni, UniPress – Indoor surfaces:

Due to its material structure and ingredients it is primarily for indoor use. We recommend it for thermal insulation of indoor wall surfaces. Areas of use: thermal insulation of interior walls, interior insulation of thermal bridges; on concrete, gypsum, precast concrete panels and lime, cement or gypsum based plasters. It can be applied to wood and wood based materials.

Thermo-S Front, FrontPress – Outdoor surfaces:

The composition of materials and the binder makes it ideal for outdoor use. We recommend it for thermal insulation of outdoor wall surfaces. Areas of use: thermal insulation of exterior walls, exterior insulation of thermal bridges, flat roof insulation (bitumen sheets), facade insulation of historic buildings; on concrete, gypsum, precast concrete panels and lime, cement or gypsum based plasters. It can be applied to wood and wood based materials.

Application:

Paint brush, paint roller, iron filler, standard spray equipment, spray plastering machine and airless paint equipment. Pressure: from 10 to 300 bar.


Thermo-S Metal, MetalPress – Metal surfaces:

The special binder material makes it ideal for indoor and outdoor use. We recommend it for thermal insulation of indoor and outdoor metal surfaces. Areas of use: outdoor and indoor metal surfaces, heating and cooling systems, cold storage, refrigerated containers, tanks, pipes and fittings, industrial buildings.

Application:

Paint brush, paint roller, iron filler, standard spray equipment, spray plastering machine and airless paint equipment. Pressure: from 10 to 300 bar.

Thermo-S with iron filler or roller

Suggested airless sprayer MARK V from GRACO

Thermo-S Front – house insulation, coloring - Debrecen

Thermo-S Front – house insulation, coloring - Debrecen

Thermo-S Uni – house insulation, - Budapest

Thermo-S Uni – house insulation, - Budapest

Thermo-S Front – Historical insulation, - Budapest Buda Castle

Thermo-S Front – SáriSáp

* At our Kiskunhalas site on the customer's requestchoice of pastel color is recommended in order to keep the heat reflection effect

Range of colors*

We are proud of that after three years of research anddevelopment the result of our work is a product range that

compares favorably to rival thin layer insulationsolutions in terms of cost/performance ratio.

Thank you for your interest in our products!

HUNGAROWATT KFT.

Hungary – 6400

Kiskunhalas, Kard u. 20

E-mail: [email protected] ; [email protected]

www.thermo-s.hu

Business

Thermo S