Upload
rscomponentstcc
View
2.427
Download
0
Embed Size (px)
Citation preview
We’ll keep your operations running smoothly with components you
can rely on. Order online 24 hours, 7 days a week.
RS AUTOMATION SOLUTIONS
www.rs-components.comwww.rs-components.com
A full range of Automation Solutions from the world’s leading brands now available at www.rs-components.com
Go online and get the brands you trust!
32 www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
EU
_006
6 –0
5/11
Terms and conditions: Customers shall deal with RS Components Limited's appointed distributor in the relevant territroy. The distributor will be soley responsible for the resale of products and services in this catalogue and the customer should therefore contact the distributor directly if there are any issues in relation to such products or services. All offers are available while stocks last. RS is trademark of RS Components Limited. An Electrocomponents Company.
CONTeNTS
Dear Customer,
This Automation & Control brochure has been designed to assist you choosing the right products to build and look after plant and process equipment.
With our widest range of products available from market leading brands for immediate despatch, RS is committed to helping you find what you need fast.
And if you want to know more about a product, online you can find over 100.000 datasheets and technical information free to download.
We look forward to helping you create better solutions at www.rscomponents.com
03 ABB
05 BOSCH ReXROTH
06 CROUZeT / CRYDOM
07 FINDeR
08 HARTING
09 HONeYWeLL
10 JUMO
11 PARKeR
12 MOeLLeR eLeCTRIC
13 OMRON eLeCTRICS
15 PePPeRL + FUCHS
16 PHOeNIX CONTACT
18 SIeMeNS
20 SMC
21 SCHNeIDeR eLeCTRIC
23 WeIDMULLeR
24 WeRMA
25 MOFLASH / KLAXON
27 BeARINGS STRUCTURAL & CONVeYOR
29 CABLe INTeRCONNeCT & SeNSORS
32 FLUID MANAGeMeNT
34 LOW VOLTAGe SWITCHGeAR
37 PROCeSS CONTROL
40 TIMe, ReLAYS, WARNING & GUARDIAN
42 eNeRGY SAVING
FAST &ReLIABLe:Your needs,our commitment
Place FSC logo here
ABBWeLCOMe
521-3677 Start, spring return; Stop, twist to release 1NO+1NC
521-3661 Start and stop, spring return 1NO+1NC
DUAL START/STOP CONTROL STATIONS•Robustly constructed, suitable for indoor or outdoor use
•Ingress protection to IP65 with metric conduit entries
•Supplied with contact block, additional contact blocks can be fitted
•Emergency stop complies with EN418
668-0920 24 Vdc, 5 A
668-0924 24 Vdc, 10 A
668-0927 12 Vdc, 10 A
668-0936 24 Vdc, 20 A
668-0930 48 Vdc, 10 A
668-0933 48 Vdc, 5 A
SWITCH MODe POWeR SUPPLIeS CP-e SeRIeS•Primary switch mode power supplies
•Adjustable output voltages
•Low power loss and low heating
•Free convection cooling (no forced cooling by fans)
•Off-load, overload and continuous short-circuit proof, automatic restart
•Integrated input fuse
•LED status "OUTPUT OK"
•Go to www.rs-components.com for more technical details
508-3533 SPDT 6 A, 24 Vac/dc
508-3549 SPDT 5 A, 110 Vac
508-3561 SPDT 6 A, 12 Vdc
508-3577 SPDT 6 A, 230 Vac
508-3583 SPDT 6 A, 48 Vac/dc
UNIVeRSAL DIN RAIL MODULe ReLAYS•DIN 1 & 3 Rail Mounting
•Slim line housing
•Replaces DIN rail terminals
•Rising clamp technology
•Wide current switching range 1 mA to 6 A dependent on unit
•Internal diodes for coil suppression and polarity protection
331-6493 3P, 20 A
282-0834 4P, 20 A
331-6500 3P, 40 A
282-0840 4P, 40 A
282-0856 4P, 50 A
e-PACK SWITCH DISCONNeCTORS•Ingress protection IP65
•Conform to IEC 947-4-3
•Lockable in the OFF position with up to three padlocks
•Robust plastic enclosure with yellow high visibility lid which cannot be removed with the switch in the ON position
445-0847 B6 4 kW 240 Vac
445-8144 BC6 4 kW 24 Vdc
445-8122 B7 5,5 kW 230 Vac
445-0825 B6 4 kW 24 Vac
445-8150 BC7 5,5 kW 24 Vdc
445-0881 B7 4 kW 240 Vac
445-8116 B6 4 kW 230 Vac
445-7860 BC6 4 kW 24 Vdc
455-6175 BC7 5,5 kW 24 Vdc
445-0853 B7 5.5 kW 24 Vac
445-0831 B6 4 kW 110 Vac
445-0869 B7 5.5 kW 110 Vac
MINI CONTACTORS•Mini contactors B 6, BC 6, B 7, BC 7
•B(C)6 - Motor rating 4 kW
•B(C)7 - Motor rating 5,5 kW
•For screw or DIN rail mounting
•Go to www.rs-components.com for more technical details
535-4100 1 pole 10 kA 2 A
535-4289 1 pole 10 kA 16 A
539-8352 1 pole 6 kA 16 A
TYPe C MCB'S•DIN rail mounting
•Complies with BS EN 60898
•Operating temperature range of -25°C to +55°C
•Standard 17,5 mm width
•Max. operating voltage: 440 Vac, 60 Vdc
4 5www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
BOSCH ReXROTHABB
529-4171 ODIN4165 65 A
529-4187 ODIN4110 10 A
ODIN MeTeR RANGe eNeRGY MeTeRS•Direct connection or via current transformers
•7 digit LCD display with phase and load indicators
•2 wire M-BUS or RS232 adapters available (option)
•Wiring diagram in front panel
•IR port
•Go to www.rs-components.com for more technical details
383-1526 7 way ground bar
383-1548 12 way ground bar
413-2252 7 way neutral bar
413-2274 12 way neutral bar
GROUND & NeUTRAL BARS•7 or 12 way
•Cable capacity 10 mm²
•Screw size M5 slotted Pozidriv
•Supplied in pack of 4
210-4570 Standard 5 x 20/25
210-4586 24 V LED 5 x 20
210-4609 115 V neon 5 x 20
FUSeD LeVeR ACTION TeRMINALS•Fused terminals with a lever action fuse carrier
•The standard product accepts both 20×5 mm and 25×5 mm fuses whilst terminals with ’fuse failed‘ indication are suited to 20×5 mm fuse links only
•Fuse failed indication terminals are available either a LED suited to 24 Vdc, or with a neon suited to 110-220 V usage
•Supplied in pack of 5
704-8239 ACS355 1 Phase 200-240 V 0,37 kW
704-8242 ACS355 3 Phase 380-480 V 0,37 kW
705-4764 ACS310 3 Phase 1,3 A 0,37 kW
705-4770 ACS310 3 Phase 3,6 A 1,1 kW
705-4789 ACS310 3 Phase 4,5 A 1,5 kW
ACS INVeRTeRS•Sensorless vector control or Scalar control if selected
•Uses Basic or Assistant Control Panels which feature a start-up assistant to aid commissioning. Assistant Panel includes real time clock, HELP key and "changed parameter" features
•8 step sequence programming allows the drive to carry out a set of sequences based on triggers from external plant actuators, reducing the need for an external PLC
•Protects motor output and I/O mis-wiring, the drive reports a fault if power is connected to the motor terminals
•Coated boards included as standard, protect against moisture and hostile particles
•IP20 rated
•EMC Filter: 2nd environment filter complying with IEC61800-3 as standard
•Can be programmed in the box with FlashDrop tool (stock no. 621-1329), allowing fast and easy drive set up and commissioning for volume manufacturing
511-0455 Basic control panel
ACS 350 & 550 BASIC CONTROL PANeL•Control of the drive with start, stop, forward
and reverse keys
•For use with ACS350 & 550 series
484-3952 End cover for Fuse Terminal
210-8639 Micro fuse terminal block, 6,3 A
MICRO FUSe TeRMINALS•Suited to both 20x5 mm and 25x5 mm fuse sizes
•Terminal pitch 8 mm, depth on rail 38 mm
•Supplied in pack of 5
389-9796 30x30L, 3 m
389-9780 30x30L, 2 m
30X30 STRUT PROFILeS•Anodised aluminium construction with 8 mm wide grooves positioned centrally
•Suitable for: trolleys, light weight appliances, frames and partitions
•Hoods and covers are attractively designed using the radius profiles
390-0032 45x45L, 2 m
390-0048 45x45L, 3 m
390-0133 45x90L, 2 m
45X45L & 45X90L STRUT PROFILeS•Anodised aluminium construction which due to the computer-optimised
design, provides high strength with reduced material usage to give a viable and cost-effective alternative
•Al strut profile,10 mm groove
390-0363 8 mm slot M6 thread
390-0408 10 mm slot M6 thread
390-0414 10 mm slot M8 thread
390-0379 8 mm slot M8 thread
390-0357 8 mm slot M5 thread
390-0391 10 mm slot M5 thread
SLIDING BLOCKS•Large supporting surface
•Transmit high forces safely
•Grade 8,8
•Overall length (mm): (6 mm) 12, (8 mm) 16, (10) 20
•Supplied in bag of 10
390-1805 10 mm slot 45x45x45 mm
390-1798 8 mm slot 30x30x30 mm
390-1811 10 mm slot 45x90x90 mm
437-1479 8 mm slot 30x60x60 mm
ANGLe BRACKeTS•Can be used to make a strong connection between
20x20, 30x30, 40x40, 45x45 or 50x50 profiles at an angle of 90°
•Brackets are non painted
•Includes non-turning centering lugs for rapid and precise alignment
•Used for shelf supports, structure reinforcement, securing systems to the floor etc
•Fasteners and cap are not included
489-3979 5 mm ID
489-3985 8 mm ID
489-3991 12 mm ID
489-4001 16 mm ID
489-4017 20 mm ID
489-4023 25 mm ID
CLOSeD STANDARD BALL BUSHINGS WITH SeALS - SeRIeS R0602•Hardened and ground outer sleeve
•Steel ball retainer (plastic in sizes 5 and 8)
•Balls made from anti-friction bearing steel
•Fitted with two seals
76 www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
FINDeRCROUZeT / CRYDOM
291-2545 7 A rms 0-100 Vdc
291-2646 7 A rms 0-200 Vdc
291-2618 7 A rms 0-400 Vdc
241-3947 10 A rms 0-200 Vdc
241-3953 10 A rms 0-500 Vdc
200-2042 12 A rms 0-100 Vdc
291-2602 12 A rms 0-400 Vdc
200-2058 20 A rms 0-100 Vdc
535-3012 25 A 0-800 Vdc
535-3028 25 A 0-800 Vdc
535-3034 25 A 0-1000 Vdc
535-3056 25 A 0-1000 Vdc
200-2064 40 A rms 0-100 Vdc
393-9377 60 A rms 0-60 Vdc
393-9383 80 A rms 0-60 Vdc
393-9399 100 A rms 0-60 Vdc
7 TO 100 A SWITCHING SOLID STATe ReLAYS•SSRs for controlling dc loads
•Extremely long operating life
•MOSFET technology relays can be connected in parallel to switch higher load currents
•Applications include dc motors, lamps, solenoids
•Terminal Type Screw; Saddle Clamp
•Operating Temperature Range -30°C to +80°C
•Dimensions: H22,9 x W45,7 x D58,4
•Max. Input to output Capacitance: 50 pF
•Internal over voltage protection for the SSC Series
184-5983 25 A, 48-530 Vac, control voltage 3-32 Vdc
184-5999 50 A, 48-530 Vac
218-1915 25 A, 48-530 Vac, control voltage 90-280 Vac
218-1921 50 A, 48-530 Vac
184-6009 Safe cover for 3 phase solid state relay
398-5140 Thermal transfer pad for SSR TP03
53TP 25-50 A, 530 VAC, 3 PHASe SOLID STATe ReLAYS•High reliability
•SCR output
•LED status indicator
•Direct load switching of motors, heaters and transformers
•Dimensions:H30 x W73,4 x D103,8 mm
•Terminal Type Screw; Saddle Clamp
•8pF Input-Output Capacitance
701-8641 Control voltage 3 - 15 Vdc
701-8654 Control voltage 4 - 15 Vdc
701-8660 Control voltage 15 - 32 Vac
701-8651 Control voltage 18 - 36 Vac
701-8648 Control voltage 90 - 140 Vac
701-8691 Din rail mount kit
DIN RAIL MOUNT SOLID STATe ReLAYS•10 mm single channel DIN rail mount SSR assembly
•AC ratings up to 530 Vac and 8 A
•SPST-NO control
•Cage style screw terminals for easy connection
•Fits standard 35 mm DIN rail
•DC control versions include an LED status indicator
331-0928 MUR1 SPDT 10 function timer, 1 sec-100 hr
331-0934 MUR3 SPDT 10 function timer, 1sec-100 hr
331-0940 SSR 10 function timer, 1 sec-100 hr
363-1269 MXR1 SPDT 10 function timer, 1 sec-100 hr
385-6957 SPDT 10 function timer, 1 sec-100 hr
CHRONOS 2 MULTIFUNCTION TIMeRS•3 wire sensor control option
•1 LED status indicator
•AgNi contact material
•17,5 mm wide
433-3900 0,05 - 1 sec, 24 Vdc
433-3916 0,05 - 10 sec, 24 Vdc
433-3887 0,1 - 1 sec, 100 - 240 Vac/dc
433-3893 0,5 - 10 sec, 100 - 240 Vac/dc
433-3944 0,5 - 10 min, 100 - 240 Vac/dc
433-3966 0,5 - 10 min, 24 Vdc
433-3950 3 - 60 sec, 24 Vdc
433-3988 3 - 60 min, 24 Vdc
SOLID STATe OUTPUT - MBA2F SeRIeS•Function - 111
•Output on-delay
•Short circuit and reverse polarity protected
•LED indication of power and output
•400 mA output rating on a.c. types
•200 mA output rating on d.c. types
•Depth: 47,5 mm
720-4079 6 A, 1-60 Vdc
720-4076 6 A, 1-100 Vdc
720-4088 6 A, 24-280 Vac
720-4149 6 A, 48-600 Vac
720-4158 6 A 48-600 Vac
720-4072 12 A, 1-60 Vdc
720-4085 12 A, 1-100 Vdc
720-4082 12 A, 24-280 Vac
DIN RAIL MOUNTING - SeRIeSONe DR SOLID STATe ReLAYS•Zero voltage switching
•Fits standard 35 mm DIN-RAIL
•LED input status indicator
•AC or DC control
•100 K-cycle UL 508 Endurance Rating
•UL, cUL, CE
386-4403 38.51, 6 A, 12 Vdc
386-4419 38.51, 6 A, 24 Vdc
386-4425 38.51, 6 A, 24 Vac/dc
431-7453 38.61, 6 A, 12 Vdc
431-7469 38.61, 6 A, 24 Vdc
431-7475 38.61, 6 A, 24 Vac/dc
434-1377 38.81, 2 A, 24 Vdc
431-7447 38.51, 6 A, 125 Vac/dc
431-7481 38.61, 6 A, 125 Vac/dc
431-7497 38.61, 6 A, 230 Vac
386-4447 09364 label for 38 series relay
386-4453 09320 busbar for 38 series relay
38 SeRIeS INTeRFACe ReLAYS•Din Rail Mount
•SPDT versions
•38.51 electromechanical relay with screw terminal
•38.61 electromechanical relay with screwless terminal
•38.81 solid state relay with screw terminal
•Operatingtemperaturerange-40°C→+55°C
•Dimensions (HxWxD) 87,9 x 6,2 x 75,6 mm
•Replacement relays (34 series e.g. 457-2830) are available
623-7157 DPDT 8 A, 24 Vdc
623-7214 SPDT 10 A, 24 Vac
48 SeRIeS INTeRFACe ReLAYS•Contactresistance:50mΩ
•Operating temperature range -40°C to + 70°C
•Mechanical life: AC versions; 10 x 106 operations, DC versions; 20 x 106 operations
•Dimensions: H78,6 mm, W15,8 mm, D76 mm
•Replacement relays stock no. 351-572 etc are available (Finder 40 Series), and should be selected such that the coil voltage, contact configuration and rating match the original type
400-9130 DPDT DIN rail relay skt - plastic clip
95 SeRIeS - SOCKeTS FOR 40 & 44 SeRIeS ReLAYS•Sockets for Finder 40, 41 and 44 series relays
•DIN Rail (35 mm) and PCB versions available
•Use coil indication and suppression module stock no. 623-9664 for 400-4129 & 400-9130
•Use coil indication and suppression module stock no. 292-8089 for 272-3137
446-0327 Modular 6 function timer,12-240 Vac/dc
80 SeRIeS TIMe DeLAY ReLAY•Functions – 111, 421, 611, 211, 191 and 451
•AgCdO contact material
•17,5 mm wide
•Go to www.rs-components.com for more technical details
385-913 12 Vdc
385-929 24 Vdc
385-935 24 Vac
385-941 110 Vac
385-957 230 Vac
55 SeRIeS ReLAYS•Test button and mechanical indicator
•Dimensions: H 39,5, W 20,6, D 27,5
•Maximum switching current 7 A
•Operating temperature range -40 to +85°C
•4PCO
385-6929 0,05 sec-60 hr
87.01 TIMeR•Functions - 111, 191, 211, 412, 421, 451, 611
•LED status indication
•22,5 mm wide
•SPDT 8 functions
•Go to www.rs-components.com for more technical details
8 9www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
HONeYWeLL CONTROL SYSTeMSHARTING
HOODS AND HOUSINGS•Metal bodied
•Available with one or two locking levers
•Locking levers available either mounted on the hood or the housing
•Go to www.rs-components.com for more technical details
114-8131 Han D 2 Lever B/head Mnt. Housing Harting 16B
114-8276 Han E 16P+E plg insert, 16 A 400-500 Vac
114-8305 Range 7 Low type side entry hood for 2lever, PG21
114-8311 Range 7 Low construction top entry hood, PG21 16B
129-2799 Range 7 High type side entry hood, PG29 16B
181-0741 Range 7 High type top entry hood, PG21 16B
181-0757 Range 7 High type top entry hood, PG29 16B
114-7712 Position sleeve for Han DD/D contacts
114-7728 Dismantling tool for Han DD/D connector
114-7857 Han-Com crimp pin contact, 0,5 mm2 Pack of 50
114-7879 Han-Com crimp socket contact, 0.5 mm2 Pack of 50
114-7970 Han-Com crimp pin contact, 1.5 mm2 Pack of 50
114-7986 Han-Com crimp socket contact, 1.5mm2 Pack of 50
156-7267 Han-Com crimp pin contact, 1 mm2 Pack of 50
156-7273 Han-Com crimp socket contact, 1mm2 Pack of 50
313-6607 Service crimp tool for Han connector
363-7829 Han-Com crimp pin contact, 0.75 mm2 Pack of 50
363-7841 Han-Com crimp socketcontact, 0.75 mm2 Pack of 50
HAN DD® & HAN COM® CRIMP CONTACTS & TOOLS•High quality turned silver and gold crimp contacts for Han DD® & Han COM®
inserts
•The parallel action crimp tool offers optimal crimp quality and requires the locator see stock no. 114-7712
•For service and small assembly the service crimp tool, see stock no. 313-6607, is offered complete with locator
•Go to www.rs-components.com for more technical details
114-7706 Parallel action crimp tool for HAN conn
114-7920 Position sleeve for HAN EE/5Q contacts
221-1779 Han-Com crimp male contact, 1.5 mm2 Pack of 50
221-1791 Han-Com crimp socket contact, 1.5 mm2 Pack of 50
221-1808 Han-Com crimp pin contact, 2.5 mm2 Pack of 50
221-1814 Han-Com crimp socket contact, 2.5mm2 Pack of 50
313-6613 Dismantling tool for Han EE/5Q connector
CRIMP CONTACTS & TOOLING•The parallel action crimp tool offers optimal crimp quality and
requires the locator, see stock no. 114-7712
•For service and small assembly the service crimp tool, see stock no. 313-6607, is offered complete with locator
•Extraction tool, see stock no. 114-7728 is recommended
•Supplied in pack of 4
•Go to www.rs-components.com for more technical details
114-8175 Han E 6P+E plg insert,16 A 400-500 Vac
114-8181 Han E 6P+E skt insert,16 A 400-500 Vac
114-8232 Han E 10P+E plg insert,16 A 400-500 Vac
114-8248 Han E 10P skt insert,16 A 500 V
114-8298 Han E 16P+E skt insert,16 A 400-500 Vac
114-8327 Han E 24P+E plg insert,16 A 400-500 Vac
114-8333 Han E 24P+E skt insert,16 A 400-500 Vac
114-8377 Han E 17-32P+E plg insert,16 A 400-500 Vac
114-8383 Han E 17-32P+E skt insert,16 A 400-500 Vac
114-8412 Han E 25-48P+E plg insert,16 A 400-500 Vac
HAN e® INSeRTS•Poles: 6-48 (screw connection – wire csa 2.5 mm²
•The 32 and 48 pole versions require two contact inserts per connector half; a standard insert numbered ‘1 to 16’ or ‘1 to 24’ pole insert (m) or (f) together with one numbered ’17 to 32’ or numbered ’25 to 48’ insert (m) or (f)
•These are identified in the price table - e.g. 32P + E (17 – 32)
•Go to www.rs-components.com for more technical details
181-0482 4P+E pin insert,10 A 230/400 V
181-0498 4P+E socket insert,10 A 230/400 V
181-0858 3P+E pin insert,10 A 230/400 V
181-0870 3P+E socket insert,10 A 230/400 V
181-0886 10P+E pin insert,16 A 230400 V
181-0892 10P+E skt insert,16 A 230400 V
181-0915 16P+E pin insert,16 A 230400 V
181-0937 16P+E skt insert,16 A 230400 V
HAN A® INSeRTS•Slim construction
•Poles: 3-16 (screw connection)
•Go to www.rs-components.com for more technical details
308-1664 Adjustable side rotary lever, die-cast zinc body
308-1692 Adjustable side rotary lever 600 Vac
308-1793 Pin plunger, die-cast zinc body
308-1816 Roller plunger, die-cast zinc body
308-1822 Side rotary roller lever, die-cast zinc body
308-1838 Coil spring, die-cast zinc body
308-1844 Side rotary adjustable rod, die-cast zinc body
308-1850 Top roller arm, die-cast zinc body
308-1872 Roller plunger, 600 Vac
308-1894 Coil spring, 600 Vac
308-1901 Siderotary adjustable rod, 600 Vac
308-1917 Top roller arm, 600 Vac
LIMIT SWITCHeS•Designed for demanding industrial applications from a
small footprint
•Available with heavy duty metal or self-extinguishing plastic bodies
246-3065 Perpendicular roller plunger, 3 m cable
246-3087 Parallel roller plunger, 3 m cable
246-3093 Pin plunger, 3 m cable
246-3100 Rotary motion, 3 m cable
246-3116 Pin plunger elastomer boot seal
MeTAL eNCLOSeD (14Ce) LIMIT SWITCHeS•Exceptionally compact and fully sealed
•Limited access facilitated by pre-wiring
223-3195 IP66 limit switch w/top roller plunger
LIMIT SWITCH - THRee CONDUIT eNTRY•Operating temperature range –25°C to +85°C
•Current rating 6 A Ith
•Compact, metal, protected to IP66
•PG 13,5 cable entry
•CE marked in compliance with relevant European directives
436-0384 Side rotary plunger
436-0390 Adjustable roller rotary
436-0407 Adjustable rod side rotary
436-0413 Top pin plunger
436-0429 Wobble stick
436-0435 Roller plunger
SZL-VL SUB-MINIATURe LIMIT SWITCHeS•Flexible cable gland
•IP64 enclosure rating
•Zinc die-cast base and plastic front cover
•5 Amp current capacity
•Double break
•Temperature range -20°C to +60°C
•56 x 21 mm between centres, base plate fixing holes
•Mounting screws supplied
•CE marked in compliance to relevant European Directives
181-1441 Unipolar latching sensor, 180 gauss 3,8-24 Vdc
181-1457 Latched sensor, 180 gauss 3,8-24 Vdc
181-1463 Bipolar latching sensor, 60 gauss 3,8-24 Vdc
181-1479 Bipolar latching sensor, 140 gauss 3,8-24 Vdc
UNIPOLAR, LATCHING & BIPOLAR SeNSORS•Reliable, rapid and compact positioning methods
•Environmentally immune
•Protected against reverse polarity
•Operates with an external magnetic field
•Space saving miniature plastic package
528-3171 HIH-4000-001 humidity sensor, 0-100% RH
HUMIDITY SeNSOR PCB MOUNT•The RH sensor is a laser trimmed thermoset polymer capacitive sensing element
•The sensing element's multilayer construction provides excellent resistance to application hazards
•Used in applications in such areas as meteorology, drying, agronomy, instrumentation, etc
•Linear voltage output vs % RH
•±2% RH accuracy
•2,54 mm lead pitch
www.rs-components.com
Over 101,000 technical data sheets available online, saving you
valuable time.
10 11www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
PARKeR HANNIFINJUMO
327-4945 50 mm
327-4951 100 mm
327-4967 150 mm
327-4973 250 mm
PT100 PROBeS WITH DIN CONNeCTOR•Temperature range from -50°C to +300°C
•Probe length from 50 mm to 250 mm
•Temperature measurement with pressure up to 25 bars
•2 wire PT100 Class B type
•Process connection: G½"
•IP65 protection class
•Stainless steel
386-8764 PT100
PT100 FOIL TeMPeRATURe SeNSOR•Temperature range: -80°C to +180°C
•Standardised nominal value and tolerance
•0,3 mm thickness
•Withstands voltages up to 3 kV
•Electrical characteristics according to EN60751
607-8829 Cylinder sensor PT100
PIPe STRAP, PT100•PT100 strap resistance thermometer
•For temperatures from -50°C to +180°C
•With aluminium protection fitting
•For round surfaces
•Simple and quick assembly
•Low thermal mass
607-8807 Cylinder sensor PT100
PT100 FeeD ReSISTANCe THeRMOMeTeR•PT100 feed resistance thermometer
•For temperatures from -50°C to +260°C
•Protection fitting made of various materials
•For level surfaces
•Quick and easy assembly
•With or without fixing holes
•Low thermal earth
386-8540 DI 08, 240 Vac
386-8663 DI 32, 240 Vac
668-3033 DI 08, 24 Vdc
668-3036 DI 32, 24 Vdc
DIGITAL DISPLAY INSTRUMeNT DI 08/DI 32•Configurable inputs and outputs
•Structured operation and programming scheme
•customer-specific linearisation
•Min./max./hold function via external contact
•Large LED (20 mm or 10 mm) ensures easy reading
•Lockable levels to protect against accidental alteration
•Configurable relay switch-on delay
•2 or 1 relay outputs and logic output 0/5 V
410-5216 240 Vac
410-5238 24 Vdc
DTRANS T02 – PROGRAMMABLe TRANSDUCeR•Galvanic separation of the unit signal
•To mount on a 35 mm x 7,5 mm top hat rail according to EN 50 022
•JUMO dTRANS T02 transducers include a microprocessor for digital signal processing
•Input and output are galvanically separated
•The transducers can be programmed using the PC setup program that is available as an accessory (sensor type, measurement range, output behaviour, fine adjusting, client-specific linearisation)
•In addition, with the 956521/... and 956522/... models, the limit values of the limit comparators and the frequency output can be programmed
•Current and voltage output are available directly at connection terminals. No hardware necessary
•PC interface cable with TTL/RS232 converter and adapter
263-0883 1/8 in BSPP brass coupling
263-0956 1/8 in BSPP brass nipple
263-0754 1/8 in BSPP s/steel coupling
263-0760 ¼ in BSPP s/steel coupling
263-0827 ¼ in BSPP s/steel nipple
263-0776 3/8 in BSPP s/steel coupling
263-0833 3/8 in BSPP s/steel nipple
263-0912 ½ in BSPP brass coupling
263-0984 ½ in BSPP brass nipple
263-0782 ½ in BSPP s/steel coupling
263-0849 ½ in BSPP s/steel nipple
263-0928 ¾ in BSPP brass coupling
263-0990 ¾ in BSPP brass nipple
263-0940 1 in BSPP brass coupling
263-1016 1 in BSPP brass nipple
PARKeR 60 SeRIeS qUICK-ACTION COUPLINGS•BSPP Thread sizes
•Hardened nipples and sleeves
•High flow capacity
•High pressure seal design
•Captive valve seal
•Durable ball locking mechanism
•Temperature range: -40°C to +80°C
110-501 G¼ xG3/8in M-F ZnPt
110-517 G¼ xG½in M-F ZnPt
110-523 G3/8 xG½in M-F ZnPt
110-539 G½ xG¾in M-F ZnPt
BSP ReDUCeRS•Reducing thread adaptors with male (Rs) BSP parallel thread
to female (Rp) BSP parallel thread
•Male thread is sealed at the port connection with a nitrile rubber seal
•Operating temperature range without pressure reductions is -30°C to +100°C
•Supplied in pack of 2
186-0011 4-50 l/min
186-0027 5-100 l/min
FLOW INDICATORS•Calibrated flow indicators specifically designed for use with water
•Suitable for installation in any plane
•Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked on the viewing window
185-9998 0,07-0,55 l/min
256-281 0,2-2 l/min
256-297 1,5-10 l/min
441-4879 4-2 2l/min
LIqUID FLOW INDICATORS•Accuracy ±2%
•Repeatability ±1%
•10 bar operating pressure
•60°C maximum operating temperature
•Must be installed in a vertical plane for maximum accuracy
185-9982 Light weight compact flow sensor, 5 Vdc
COMPACT FLOW SeNSOR•Manufactured from Grilamid TR55 with a PTFE
filled nylon rotor on a stainless steel shaft
•Accuracy: ±5%
•Dimensions (mm): 52 x 29 x 27
•Weight: 16 g
www.rs-components.com
Process your next order at a local RS branch near you.
With over 30,000 automation products
available online, you are truly in control.
12 13www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
OMRON eLeCTRONICSMOeLLeR eLeCTRIC
225-8150 Black non latching foot/palm switch
225-8166 Red non latching foot/palm switch
225-8172 Red/yel stayput foot/palm switch
FOOT/PALM SWITCHeS•94 mm diameter pushbutton
•IP67
•Five M20 cable entries (one threaded)
•IEC418 tamperproof
•Impact resistant housing
•Rated operational current Ie AC-15 230 Vac 6 A, DV-13 24 Vdc 3 A
•6000 Vac rated impulse withstand voltage
•500 V rated insulation voltage
399-3084 Pull to release emergency stop actuator
399-3090 Pul to release illuminated emergency stop actuator
399-3107 Key release emergency stop actuator
399-3135 Sealable shroud for actuators
489-3339 Key for RMQ titan lock mechanism switch
eMeRGeNCY STOP SWITCHeS•Illuminated or non-illuminated style (separate LED block required)
•Complete with fixing adapter for contact blocks
•Optional shroud for harsh environments/food industry
•Stock no. 399-3107 supplied with one key
467-6128 Illuminated twist to release stop actuator
467-6134 Non-Illuminated twist to release stop actuator
eMeRGeNCY STOP SWITCH, ACTUATOR•Tamper proof to ISO 13 850/EN 418
•IP67 rated
•Fits standard 22 mm mounting hole
•90 mm label supplied
•Protective collar is designed to be used with RMQ Titan E-Stop heads, to reduce the chance of operating a E-Stop unintentionally by striking it, It is fitted between the E-Stop head and the mounting panel
399-3113 Key release emergency stop station
399-3129 Pull to release emergencystopstation
TITAN RANGe eMeRGeNCY STOP STATIONS•Ingress protection to IP66
492-1737 0,1-0,16 A
492-1478 0,16-0,25 A
492-1484 0,25-0.4 A
492-1490 0,4-0,63 A
492-1507 0,63-1 A
492-1513 1-1,6 A
492-1529 1,6-2,5 A
492-1535 2,5-4 A
492-1541 4-6,3 A
492-1557 6,3-10 A
492-1579 8-12 A
492-1743 10-16 A
PKZM01 PUSHBUTTON OPeRATeD MPCB•Rated operating voltage 690 Vac
•Temp. range: -25°C to +55°C
•Temp. compensated range -5°C to +40°C
•Adjustable current trip level, 0,6 – 1,0 x nominal rating
•Short-circuit trip level (fixed) 14x nominal rating
•Single-phase-failure sensitivity to IEC60947-4-1
•Simple two-button operation for starting and stopping motors
•May be locked in the "off" position
488-9396 EASY512-AB-RC 12i/o 24 Vac
488-9403 EASY512-AB-RCX 12i/o 24 Vac
488-9419 EASY512-DA-RC 12i/o 12 Vdc
488-9425 EASY512-DA-RCX 12i/o 12 Vdc
488-9475 EASY512-DC-RCX 12i/o 24 Vdc
489-1361 EASY512-AC-R 12i/o
489-1377 EASY512-AC-RC 12i/o
489-1399 EASY512-AC-RCX 12i/o
489-1406 EASY512-DC-R 12i/o 24 Vdc
489-1412 EASY512-DC-RC 12i/o 24 Vdc
489-1428 EASY512-DC-TC 12i/o 24 Vdc
489-1434 EASY512-DC-TCX 12i/o 24 Vdc
eASY 500 PLC'S•Easy 500 units are not expandable
•Programmable using drag and drop PC software
•Transistor output type rating/point: 0,5 A @ 24 Vdc
•Relay output type rating/point: 8 A @ 24 Vdc
•Password security
•Operating temperature range: -25°C to 55°C
113-8128 0,05 sec-300 hr 24-28 Vdc
113-8134 0,05 sec-300 hr 24-28 Vdc
11 PIN TIMeRS, H3CR-A•DPDT 6 functiontimer
•Functions - 143, 211, 453, 521, 611, 612
•LED indication of power and contact status
277-3542 SPDT 4 functimer, 0,1 s-120 h 24-230 Vac/dc
277-3558 DPDT 4 functimer, 0,1 s-120 h 24-230 Vac/dc
277-3564 SPDT 8 functimer, 0,1 s-120 h 24-230 Vac/dc
277-3570 DPDT 8functimer, 0,1 s-120 h 24-230 Vac/dc
4 & 8 MULTIFUNCTION TIMeRS - H3De•Multiple time ranges and operating modes
•0,1 s-120 h
•24-230 Vac-dc
•Go to www.rs-components.com for more technical details
687-6092 100-240 Vac, screw, SPDT
687-6096 100-240 Vac, 11 pin, SPDT
687-6103 12-24 Vac/dc, 8 pin, SPDT
687-6106 12-24 Vac/dc, screw, SPDT
687-6109 100-240 Vac, 8 pin, SPDT
687-6112 12-24 Vac/dc, 8 pin, SPST transistor
687-6115 12-24 Vac/dc, 11 pin, SPST transistor
687-6121 100-240 Vac, 11 pin, SPST transistor
687-6128 100-240 Vac, screw, SPST transistor
ULTRA COMPACT DIGITAL TIMeRS - H5CX SeRIeS•Shorter body depth
•Display colour can be switched between red, green and orange (status monitoring)
•Up/Down keys for each digit
•Twin Timer and Variable ON/OFF duty modes
•Service Life Notification - The number of times that the control output turns ON is counted and an alarm is displayed when a preset count is exceeded
•12 mm character height
•Setting Upper Limit prevents unwanted operation
•Isolated power supply and input circuits (Prevent unwanted circuit paths) on 100-240 Vac versions
348-1840 Black NPN/PNP i/p backlit LCD counter
348-1856 Beige NPN/PNP i/p backlit LCD counter
348-1878 Beige NPN/PNP i/p nonbacklit LCD counter
348-1890 Black ac/dc multi volt i/p LCD counter
348-1907 Beige ac/dc multi volt i/p LCD counter
348-1913 Black non voltage i/p LCD counter
348-1929 Beige non voltage i/p LCD counter
348-1935 Black non-volt i/p non backlit LCD timer
348-2001 Black DIN LCD counter
348-2118 Black non voltage i/p LCD counter
348-2124 Beige non voltage i/p LCD counter
348-2130 Black NPN/PNP i/p backlit LCD counter
348-2146 Beige NPN/PNP i/p nonbacklit LCD counter
348-2152 Black NPN/PNP i/p nonbacklit LCD counter
348-2168 Beige NPN/PNP i/p backlit LCD counter
H7e SeRIeS FReqUeNCY/COUNTeRS (LCD)•Self powered by internal battery which can
also be replaced
•Key protected switch to prevent accidental reset switch operation
•Dual operation mode
•Finger touch protection
494-6506 5 Vdc 2 A 10 W
494-6512 12 Vdc 1,2 A 15 W
494-6528 24 Vdc 0,65 A 15 W
494-6534 5 Vdc 4 A 20 W
494-6540 12 Vdc 2,5 A 30 W
494-6556 24 Vdc 1,3 A 30 W
494-7997 S82Y-VS30P bracket for S8 VS switch mode
SWITCH MODe S8 VS SeRIeS POWeR SUPPLIeS•Compact industrial standard housing only 22,5 mm wide
•No derating up to 60°C
•DIN rail mounting as standard with option to side or flat mount with optional bracket 494-7997
•Low voltage indication
•Ripple less than 2% P-P after 10 years operation
•5 year warranty as standard
441-5816 S8 VS-06024, 24 V 60 W
441-5822 S8 VS-06024B, 24 V 60 W
441-5838 S8 VS-09024, 24 V 90 W
441-5844 S8 VS-069024B, 24 V 90 W
452-8631 S8 VS-12024, 24 V 120 W
452-8647 S8 VS-12024B, 24 V 120 W
452-8653 S8 VS-24024, 24 V 240 W
452-8669 S8 VS-24024B, 24 V 240 W
468-3019 S8 VS-18024, 24 V 180 W
468-3025 S8 VS-18024B, 24 V 180 W
S8 VS SeRIeS POWeR SUPPLIeS•Visible and slim DIN rail power supply
•'B' suffix units have 3-digit LED display and can show the operating output voltage, output current, peak hold current or total run time
•PFC, conforms to EN61000-3-2 (90 W version)
14 15www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
PePPeRL+FUCHSOMRON eLeCTRONICS
329-7162 G2R-1-SNI SPCO 10 A 12 Vdc
329-7184 G2R-1-SNI SPCO 10 A 24 Vac
329-7207 G2R-1-SNI SPCO 10 A 230 Vac
329-7229 G2R-1-SDNI SPCO 10 A 24 Vdc
329-7235 G2R-2-SNI DPCO 5 A 12 Vdc
329-7241 G2R-2-SNI DPCO 5 A 24 Vdc
329-7257 G2R-2-SNI DPCO 5 A 24 Vac
329-7263 G2R-2-SNI DPCO 5 A 110 Vac
329-7285 G2R-2-SNI DPCO 5 A 230 Vac
G2RS SeRIeS WITH TeST BUTTON POWeR ReLAYS•Integral coil status LED, and mechanical operation indicator
•Cadmium and lead free
•Contactresistance:100mΩ
•Coil to contact isolation: 5000 Vac
•Operating temperature range: -40°C to + 70°C
•H35,5, W29, D13 mm
•DIN Rail and PCB sockets are available separately
327-7720 MY4IN1 48DC(S) 4PDT 5 A
327-7742 MY4IN 48/50 AC(S) 4PDT 5 A
327-7758 MY4 12 AC(S) 4RT 5 A
548-4223 MY2IN 12DC(S) DPDT 10 A
548-4245 MY2IN 24DC (S) DPDT 10 A
548-4251 MY2IN 24 AC (S) DPDT 10 A
548-4273 MY2IN 220/240 AC (S) DPDT 10 A
488-1774 MY4 220/240 AC (S) 4PDT 5 A
488-1780 MY4IN 24 AC (S) 4PDT 5 A
488-1819 MY4IN 220/240 AC (S) 4PDT 5 A
488-1825 MY4IN 12DC(S) 4PDT 5 A
488-1831 MY4IN 24DC (S) 4PDT 5 A
488-1847 MY4N-D2 12DC(S) 4PDT 5 A
488-1869 MY4N-D2 24DC(S) 4PDT 5 A
488-1881 MY4N-CR 220/240 AC(S) 4PDT 5 A
488-1904 MY2 220/240 AC (S) DPDT 10 A
488-1926 MY2N24 ACS DPDT 10 A
488-1948 MY2N 220/240 AC(S) DPDT 10 A
488-1954 MY2N 12DC(S) DPDT 10 A
488-1960 MY2N 24DC(S) DPDT 10 A
488-1976 MY2N-D2 12DC(S) DPDT 10 A
488-1982 MY2N-D2 24DC(S) DPDT 10 A
488-2008 MY2N-CR 220/240 AC(S) DPDT 10 A
488-2553 MY4 24 AC (S) 4PDT 5 A
488-2569 MY4 12DC(S) 4PDT 5 A
488-2575 MY4 24DC (S) 4PDT 5 A
488-2597 MY2 24 AC (S) DPDT 5 A
488-2604 MY2 12DC(S)+ DPDT 5 A
488-2610 MY2 24DC (S) DPDT 5 A
MY SeRIeS ReLAYS•MY2 Mechanical Flag indication
•MY4 Label Facility
•MY2N LED Indication
•MY2-IN Mechanical Flag & LED Indication Push-To-Test
•MY4-IN Label Facility Push-To-Test
•MY2N-D2 Mechanical Flag & LED Indication
•MY4N-D2 Label Facility, Diode Suppression
•MY2N-CR Mechanical Flag & LED Indication
•MY4N-CR Label Facility, CR Suppression
•Go to www.rs-components.com for 110/120 Vac range
394-9065 4PCO 3 A 12 Vdc
394-9071 4PCO 3 A 24 Vdc
394-9087 4PCO 3 A 24 Vdc
394-9100 4PCO 3 A 110/120 Vac
394-9116 4PCO 3 A 220/240 Vac
MY4 SeRIeS ReLAYS•Use PCB mounting socket (196-6153)
•Use DIN rail mounting socket (196-6147)
•Contact material: Au clad; Ag alloy
•Operating temperature range: -55°C to +70°C
•Switching current 3 A
•Switching voltage 250 Vac; 30 Vdc
•Dimensions: H36 mm x W21.5 mm x D28 mm
303-0391 Conductive level controller, 110 Vac
303-0414 Conductive level controller, 240 Vac
PLUG-IN CONDUCTIVe LeVeL CONTROLLeRS•Compact units for single or two-point level
control of purified or sewage water
•Single level control; relay de-energises when liquid level drops below the set level electrode
•Two point level control; relay de-energises when liquid level drops below low level electrode and energises when level reaches high level electrode
•Operatingresistance;4KΩON
•Max, lead length to probe; 1 km
•Dimensions: H84 mm, W38 mm, D49,4 mm
705-1834 Single phase 200 Vac 0,2 kW
705-1838 Single phase 200 Vac 0,4 kW
705-1840 Single phase 200 Vac 1,5 kW
705-1844 Single phase 200 Vac 2,2 kW
705-1847 Single phase 200 Vac 0,75 kW
705-1850 Three phase 400 Vac 1,5 kW
705-1853 Three phase 400 Vac 0,4 kW
705-1856 Three phase 400 Vac 0,75 kW
705-1862 Three phase 400 Vac 4,0 kW
705-1866 Three phase 400 Vac 5,5 kW
705-1869 Three phase 400 Vac 2,2 kW
705-1875 Three phase 400 Vac 7,5 kW
JX INVeRTeR DRIVeS•RS485 Modbus built-in
•EMC filter built-in
•Micro-surge voltage suppression
•Second motor setting
•PTC thermistor input
•Auto carrier-frequency reduction
•Cooling fan switch control
•Go to www.rs-components.com for more technical details
339-5238 PVC cable cylindrical float switch, 250 V
339-5244 PVC cable ball float switch, 250 V
350-2060 PUR cable cylindrical float switch, 250 V
350-2076 CSM cable cylindrical float switch, 250 V
350-2082 PUR cable ball float switch, 250 V
350-2098 CSM cable ball float switch, 250 V
FFS FLOAT SWITCHeS – CYLINDeR TYPe•Cylinder type for small apertures
•Mercury free micro switch with switching ball
•Density:≥0,8g/cm3
•Polypropylene float
•Cable: 5 m, 3 x 0,75 mm2
•Dimensions: 29,2 mm diameter, 135 mm length
249-2265 Prewired, M18 PNP
249-2287 Prewired, M18 NPN
249-2293 Prewired, M12 PNP
249-2300 Prewired, M12 NPN
249-2316 Pre-wired, M8 PNP
249-2322 Pre-wired, M8 NPN
249-2344 Pre-wired, M5 PNP
249-2350 Pre-wired, M5 NPN
249-2366 Plug in, M18 PNP
249-2372 Plug in, M18 NPN
249-2388 Plug in, M12 PNP
249-2394 Plug in, M12 NPN
249-2401 Plug in, M8 PNP
249-2417 Plug in, M8 NPN
249-2524 Pre-wired, M30 NPN
249-2530 Pre-wired, M30 PNP
249-2546 Plug in, M30 NPN
249-2568 Plug in, M30 PNP
INDUCTIVe PROXIMITY SeNSORS - STANDARD SeNSING RANGe•Nickel plated brass housing with PBT face
•LED indication
•Embeddable
•IP67
•Operating temperature range -25°C to +70°C
•Supply voltage 10 Vdc to 30 Vdc
•Short circuit and reverse polarity protection
•Pre-wired types have 2 m PVC cable
•Plug-in types have M12 type V1 connector
249-2423 Plug-in, M18 PNP
249-2439 Plug-in, M18 NPN
249-2445 Plug-in, M12 PNP
249-2451 Plug-in, M12 NPN
265-6087 Pre-wired, M8 PNP
265-6093 Pre-wired, M12 NPN
265-6100 Pre-wired, M12 PNP
265-6116 Pre-wired, M18 NPN
265-6122 Pre-wired, M18 PNP
INDUCTIVe PROXIMITY SeNSORS - eXTeNDeD SeNSING RANGe•Nickel plated brass housing with PBT face
•LED indication
•Embeddable
•IP67
•Operating temperature range -25°C to +70°C
•Supply voltage 10 Vdc to 30 Vdc
•Short circuit and reverse polarity protection
•Pre-wired types have 2 m PVC cable
•Plug-in types have M12 type V1 connector
312-9508 M12 NPN NO/NC
312-9514 M12 PNP NO/NC
312-9520 M18 NPN NO/NC
312-9536 M18 PNP NO/NC
312-9542 M30 NPN NO/NC
312-9558 M30 PNP NO/NC
INDUCTIVe PROXIMITY SeNSORS - FOUR-WIRe THReADeD BARReL SeNSORS•Nickel plated brass housing with PBT sensing face
•LED indication
•Embeddable
•IP67
•Operating temperature range -25°C to +70°C
•No load current 20 mA
•EN60947-5-2
•Short circuit and reverse polarity protection
•Configurable N/O or N/C contacts
458-5432 M8 plug-in barrel inductive sensor
458-5454 4 mm pre-wire, M12
458-5460 4 mm plug-in, M12
458-5476 8 mm plug-in, M18
458-5482 15 mm pre-wire, M30
458-5498 15 mm plug-in, M30
458-5599 8 mm pre-wired, M18
INDUCTIVe PROXIMITY SeNSORS - SHORT BODY, eXTeNDeD SeNSING RANGe•Nickel plated brass housing with PBT face
•LED indication
•Embeddable
•IP67
•Operating temperature range -25°C to +70°C
•EN60947-5-2
•Short circuit and reverse polarity protection
16 17www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
PHOeNIX CONTACTPHOeNIX CONTACT
463-3834 Terminal block, 2,5.mm2
463-3840 Terminal block, 4 mm2
463-3856 End cover for UKKB double deck terminal
DOUBLe DeCK TeRMINALS•Better accessibility to the lower connection screws
•Better visibility of the lower marker labels and wire entry points
•Colour grey
•Supplied in pack of 5
101-2723 Rail end bracket for 35 mm2 terminal Pack of 10
101-2751 Grey DIN rail contact terminal, 2,5 mm2 Pack of 10
101-2773 Blue terminal, 2,5 mm2 24 A Pack of 10
101-2789 Grey terminal, 4 mm2 41 A Pack of 10
101-2795 Blue terminal, 4 mm2 41 A Pack of 10
446-0793 10 way jumper link for 2,5 mm2 terminal Pack of 5
446-0816 10 way jumper link for 4 mm2 terminal Pack of 5
446-0822 10 way jumper link for 6 mm2 terminal Pack of 5
446-0838 10 way jumper link for 10 mm2 terminal Pack of 5
446-0850 Blue terminal, 10 mm2 76 A Pack of 10
446-1724 Grey terminal, 6 mm2 57 A Pack of 10
446-1730 Earth terminal, 6 mm2 57 A Pack of 10
446-1746 Grey terminal, 10 mm2 76 A Pack of 10
446-1768 Earth terminal, 10 mm2 76 A Pack of 10
446-1774 Blue terminal, 6 mm2 57 A Pack of 10
458-0932 Grey standard terminal connector, 16 mm2 Pack of 5
458-0948 Grey standard terminal connector, 35 mm2 Pack of 5
458-0954 Grey UK series terminal endcover, 16 mm2 Pack of 5
458-0960 Green/yellow earth terminal conn, 35 mm2 Pack of 5
458-1367 Green/yellow earth terminal conn, 16 mm2 Pack of 5
462-9172 DIN rail contact earth terminal, 2,5 mm2 Pack of 10
462-9188 DIN rail contact earth terminal, 4 mm2 Pack of 10
484-3671 End plate cover for UK terminal, 2,5 mm2 Pack of 5
484-3687 End cover for 4-10 mm sq, terminal Pack of 5
UNIVeRSAL TeRMINALS•35 mm² version does not require end cover as it
is an enclosed housing
•Polyamide material. Rated to 750 V (EN50019)
•All the terminals, the end plates, and the rail end bracket, in varying quantities, are contained in the boxed kit. See stock no 458-0819
463-3862 UKN series 5 mm fuse 6,3 A
463-3878 UKN series 6,3 mm fuse 25 A
FUSe TeRMINALS•Options to accommodate 5x20 mm and 6,3x32
mm fuses
•Terminal width 8,2 (5x20 mm), and 10,2 (6,3x32 mm)
•Supplied in pack of 5
665-7908 24 Vdc 10 A
665-7911 24 Vdc 2,5 A
TRIO-PS/1 AC/ SINGLe PHASe POWeR SUPPLIeS•Single-phase power supplies 85 to 264 Vac input
•Output Voltage 12 or 24 Vdc
•Operating temperature range 0°C to +70°C
665-7826 5 Vdc 6,5 A
665-7817 12 Vdc 5 A
665-7813 15 Vdc 4 A
665-7810 24 Vdc 0,75 A
665-7807 24 Vdc 3,8 A
665-7804 48 Vdc 2 A
STeP POWeR SINGLe PHASe POWeR SUPPLIeS•Easy mounting on the rail and wall
•Maximum energy efficiency through small losses
•Fast commissioning with LED function monitoring
•High operational safety by long power failure under full load
•Worldwide use by wide-range intake and international approval package
•Wide temperature range from -25°C to +70°C
•Parallel switched to increase performance and redundancy
665-7797 5 Vdc 3 A
665-7781 10-15 Vdc 2 A
665-7902 10-15 Vdc 8 A
665-7829 24 Vdc 1.5 A
665-7845 24 Vdc 1.5 A EX
665-7788 24 Vdc 2 A
665-7905 24 Vdc 3.8 A
665-7772 24 Vdc 4 A
665-7784 2x15 Vdc 1 A
MINI POWeR POWeR SUPPLIeS•Service Friendly connection technology
•Coded COMBICON plug connector
532-9980 2964319
NPN TO PNP/PNP TO NPN SIGNAL INVeRTeR•Supply voltage range 20 – 30 Vdc
•200 mA continuous current
•15 khz max. transmission frequency
489-2853 T/C transducer
489-2875 PT100 transducer
CONFIGURABLe TeMPeRATURe SeNSORS TRANSDUCeRS•Input, type J or K Thermocouples. Temperature
range -150°C to +1200°C
•Input, 2,3 or 4 wire PT100. Temperature range -150°C to +850°C
532-9946 DIN rail 3-way current isolator
532-9968 DIN rail 3-way voltage isolator
532-9974 DIN rail power supply repeater
3-WAY CURReNT ISOLATORS•Input and output, 0-20 mA, 4-20 mA
533-0047 5 Vdc in 3 - 30 Vdc out
533-0003 5 Vdc in 5 - 30 Vdc out
533-0031 12 Vdc in 3 - 30 Vdc out
533-0025 24 Vdc in 3 - 30 Vdc out
533-0081 24 Vdc in 3 - 48 Vdc out
533-0019 24 Vdc in 5 - 30 Vdc out
533-0069 24 Vdc in 5 - 30 Vdc out
533-0075 24 Vdc in 10 - 253 Vac out
533-0097 120 Vac in 3 - 48 Vdc out
533-0104 240 Vac in 3 - 48 Vdc out
533-0126 End cover for DIN rail optocoupler
DC/DC, DC/AC & AC/DC OPTO-COUPLeRS•dc in/dc out, dc in/ac out and ac in/dc out
versions available
•Versions with switching speeds up to 100 khz available
•2,5 kVac input to output isolation
•LED status indication
•Module width 6,2 mm
•Operating temperature range: -20°C to +60°C
290-1416 REL-MR- 24DC/21
290-1422 REL-MR- 60DC/21
306-6536 PLC-OSC- 24DC/ 48DC/100
306-6558 PLC-OSC- 24DC/ 24DC/ 2
352-8832 PLC-RSC- 24UC/21
358-8288 REL-MR- 24DC/21 AU
358-8317 PLC-RSC- 24DC/21 AU
358-8339 PLC-RSC-230UC/21
358-8373 PLC-ESK GY
358-8389 PLC-ATP BK
410-8035 PLC-V8/D15S/OUT
434-1311 PLC-RSC- 12DC/21
434-1327 PLC-RSC- 24DC/21-21
PLC-RSC SeRIeS INTeRFACe ReLAYS•Relays and opto-couplers for inputs and outputs with "pluggable" switching devices
•Four bridging slots to reduce wiring; bridging of up to 80 modules is possible
•Screw terminal connections
•LED indicators and diodes for coil suppression
•250 V versions have a switched power rating of 1500 VA
•Dimensions (WxDxH) 6,2 x 80 x 94 mm (Single pole, double pole 14 mm wide)
•Operating temperature range -40°C to +55°C
•Mechanical life (relays) 1 x 107 operations
712-4046 5 RJ45 Ports
712-4049 8 RJ45 Ports
eTHeRNeT SWITCHeS•Ethernet switch, 5 or 8 RJ45 ports
•Automatic detection of data
•Transmission speed of 10 Mbps or 100 Mbps (Ethernet in RJ45 twisted pair)
•Autonegotiation and autocrossing functions
•LEDs: link and activity per port
•Maximum conductor length (twisted pair) 100 m
•IP20
18 19www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
SIeMeNSSIeMeNS
499-766 24RC 8 digital in, 4 digital out
499-845 12/24RC 8 digital in, 4 analog in, 4 digital out
499-829 230RC 8 digital in, 4 digital out
LOGO! STANDARD 7TH GeNeRATION•Programmed using LOGO! Soft Comfort V6 software or by insertion of a
pre-programmed memory module
•8 digital inputs and 4 digital outputs
•Expandable with password security
•Dimensions: H90 mm x W72 mm x D55 mm
499-756 24RCO 8 digital in, 4 digital out
499-762 12/24RCO 8 digital in, 4 analog in, 4 digital out
499-823 230RCO 8 digital in, 4 digital out
LOGO! PURe 7TH GeNeRATION•The LOGO! Pure has all the functionality of the LOGO!
standard units, without the function keys or display
•Ideal for applications where no access to the LOGO! is required
•Programmed using LOGO! Soft Comfort V6 software or by insertion of a pre-programmed memory module
•8 digital inputs and 4 digital outputs
•Expandable with password security
•Dimensions: H90 mm x W72 mm x D55 mm
•Operating temperature range: 0°C to 55°C
499-734 2 channel analogue output
eXPANSION MODULe AM2 Aq•2 channel analogue output 0 - 10 V
488-6757 s7-221 85 - 246 Vac
488-6735 s7-221 CPU 24 Vdc
488-6634 s7-222 85 - 246 Vac
488-6713 s7-224 24 Vdc
488-6814 s7-224 85 - 246 Vac
488-6690 s7-224XP 24 Vdc
488-6678 s7-224XP 85 - 246 Vac
488-6662 s7-226 24 Vdc
488-6656 s7-224 85 - 246 Vac
S7-200 BASe UNITS - 3RD GeNeRATION•New CPU hardware support provides the option to turn off run mode edit to
obtain more program memory
•CPU 224XP supports onboard analogue I/O and two communication ports
•CPU 226 includes additional input filters and pulse catch facility
•0,22μsprocessingtimeperinstruction
•Modular Expansion up to 256 total I/O (except S7-221)
•Powerful Instruction Set, and Real Time performance
•Programming via RS-485 comms port
•All models have EEPROM memories for user program storage
668-3131 6ES7212-1BD30-4YB0
SIMATIC S7-1200 STARTeR PACK•CPU 1212C AC-DC/Relay
•Input simulator
•2 m connection cable
•STEP7 BASIC CD
•Manual on CD
•Information material
•Transit box
488-6145 6 AV66500DA010 AA0
STARTeRKIT TP 177 MICRO•For operating and monitoring machines and plants
•Full graphic 5,7 in. STN touchscreen (analogue/resistive) for the SIMATIC S7-200
•Suitable for use in tight spaces with high-edge programming function
•Network capable (PPI, MPI)
•5 online languages incl. Asian and Cyrillic characters
•A PC/PP adapter cable (Stock no. 468-5829) is required to download the programming software
443-0304 24 V 10 A 240 W
443-0326 24 V 5 A 120 W
451-7063 24 V 40 A 960 W
451-7079 24 V 20 A 480 W
SITOP MODULAR, SINGLe- AND TWO-PHASe POWeR SUPPLIeS•Ultra-wide-range input for universal and safe use
•Selectable short-circuit response: contant current with automatic restart or latching shutdown
•Switchable output characteristic for uniform power distribution in case of parallel operation
•Signaling contact and 3 LEDs for sensing the operating state
•Output voltage adjustable up to 28,8 V for compensating voltage drops
•For demanding applications from 5 A to 40 A
•Functionally expandable with SITOP expansion modules and DC UPS
395-9589 24 V 20 A 480 W
395-9595 24 V 40 A 960 W
480 TO 960 W THRee PHASe POWeR SUPPLIeS•Compact design, high power density
•PFC to EN61000-3-2 and RFI to EN55022-B
•Fully regulated output
•Adjustable output voltage
•Switchable output characteristic for parallel operation
•LED output indicator
•Selectable constant current or latching switch-off short-circuit response
•Basic unit functions can be expanded by additional modules
465-9454 0,12 kW
465-9476 0,25 kW
465-9482 0,37 kW
465-9498 0,55 kW
465-9505 0,75 kW
465-9511 1,1 kW
465-9533 1,5 kW
465-9549 2 kW
465-9555 3 kW
MICROMASTeR 4201-PHASe 230 V INPUT INVeRTeR DRIVeS•Micro processor controlled, using IGBT technology
•Programmable & scalable analogue input 0 V to 10 V
•Integral class A EMC filter for single phase type
•Flux current control (FCC) for good dynamic response & motor control
•Fast current limitation (FCL) for operation with trip-free mechanism
•Built in d.c. injection brake
•Acceleration/deceleration times with programmable smoothing
505-1974 0,12 kW
505-2113 0,25 kW
505-2129 0,37 kW
505-2012 0,55 kW
505-2090 0,75 kW
505-2157 1,1 kW
505-1980 1,5 kW
505-1996 2,2 kW
505-2135 3 kW
468-5346 DIN rail adaptor for G110 inverter
G110 RANGe SINGLe PHASe WITH FILTeR INVeRTeR DRIVeS•Installation and commissioning is fast and
uncomplicated
•Contactor style power terminal layout
•Fast braking without external brake resistor
•Integral EMC filter
•Easy DIP switch selection of mains input frequency 50 Hz or 60 Hz
•IP20 protection rating
•3 programmable digit inputs, 1 analogue (0-10 V )
665-4928 Power Monitoring Device PAC3200
665-4921 Communication Module PROFIBUS DP
665-4925 Communication Module RS485
SeNTRON PAC3200•Measurement voltage up to 690 V (UL-L)
•High measuring accuracy for energy, class 0,5 S in accordance with IEC62053-22 for active energy
•Integrated Ethernet interface.
•Multifunctional digital inputs and outputs
•Simple operation with intuitive user prompting
•Comprehensive recording of consumption: 10 energy meters for active energy, reactive energy and apparent energy, high and low tariffs, import and export
243-7325 2 NO 2 NC 110 Vac
243-7331 2 NO 2 NC 230 Vac
243-7347 2 NO 2 NC 24 Vdc
243-7369 3 NO 1NC 230 Vac
243-7375 3 NO 1NC 24 Vdc
243-7410 4 NO 230 Vac
CONTACTOR ReLAYS - 3RH11 RANGe•Size S00
•Positively driven contacts with no restrictions
•PLC compatible switching
•Rated operational voltage; 690 V
•57,5 x 45 x 72,5 mm (H x W x D)
•Ambient temperature range -25°C to +60°C
•Mechanical life: 3 x 107 operations
•Electrical life: 1 x 107 operations
20 21www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
SCHNeIDeR eLeCTRICSMC
721-3531 Port size ¼
721-3543 Port size 3/8
721-3556 Port size ½
AIR SAVING VALVeS•40% reduction in air consumption
•Cuts the air consumption via operating the return stroke at a reduced pressure
•Improved response time
•Smooth operation of working and return strokes possible
•Easy piping
•The set pressure can be either fixed or variable
494-3349 R1/8 M5 6 mm
494-3355 R1/8 R1/8 8 mm
494-3361 R¼ R1/8 6 mm
494-3377 R¼ R1/8 8 mm
494-3383 R3/8 R1/8 8 mm
494-3399 R3/8 R1/8 10 mm
494-3406 R½ R¼ 10 mm
494-3412 R½ R¼ 12 mm
COMBINeD BLOCKING AND FLOW ReGULATOR•Integrated pilot valve and speed controller
•Temporary intermediate stop and speed control cylinders
•360° freedom for tube mounting direction
690-0212 Not supplied with nozzle
668-2059 With nozzle
AIR OPeRATeD BLOW GUNS•Energy saving
•Shock resistant body
•Gun body made from high impact, shock resistant resin
•Not affected by supply presure
•Trigger mechanism gripping force the same at high and low pressure
668-1844 Port size 1/8
668-1848 Port size ¼
668-1857 Port size 3/8
VXe SOLeNOID VALVeS•2 Port Solenoid Valve
•Energy Saving Type
721-3975 High pressure measurement
721-3979 Vacuum measurement
SMC MANOMeTeRS - PPA SeRIeS•Compact and light weight
•Back light for easy viewing in dark locations
•Long service life of 12 months continuous operation
•Convenient hand strap for carrying
•Zero/span calibration is possible
•Peak/bottom hold function
•Auto power off function to save batteries
419-8937 G ¼ 0,05 - 1 bar
350-0761 G ¼ 0,05 - 5 bar
350-0777 G ¼ 0,05 - 9 bar
eLeCTRO-PNeUMATIC ReGULATORS•Near zero air consumption at set pressure
•Temperature range +5°C to +50°C
•Analogue output monitoring signal
•LED three digit pressure display
•Zero and span settings are adjustable without supply pressure being present
•IP65 enclosure rating
•Complete with mounting bracket and 3 m connecting lead
425-8433 1NC turn to release emergenc ystop switch
425-8427 1NC key release emergency stop switch
425-8506 1NC push pull emergency stop switch
eMeRGeNCY STOP & MUSHROOM HeADS, XB4-B•Contact Configuration: 1NC
•Current Rating: 3/0,27 A
•Actuator Type: turn release
•Switching Capability: 240 Vac, 250 Vdc
294-0001 Beacon base & cover
294-0348 Buzzer Unit,12-48 Vdc
436-2037 Green static LED beacon, 24 V
436-2043 Red static LED beacon, 24 V
436-2059 Orange static LED beacon 24 V
STACKING BeACONS AND BeACONS, XVB SeRIeS•Available as incandescent (bulbs must be ordered separately) or LED
modules
•May be assembled with up to 5 light modules or 4 light modules and 1 sound module
•Buzzers are available with intermittent or continuous tones
•Base & cover need to be ordered separately for mounting
•The sound unit operates from a 12-48 Vac or 120-230 V supply
•Sound level of 90 dB at a frequency of 0-12 kHz
•Made from Glass Reinforced Polyamide and Polycarbonate
•Units are 70 mm in diameter and 63 mm in height
•Cable access from side or beneath
447-4477 24 Vac 3NO
447-4499 230 Vac 3NO
XPS AC, SINGLe CHANNeL SAFeTY ReLAYS•Provides 3 N/O safety relay outputs plus 1 solid
state output PLC signalling
•Monitoring of start button or automatic starting
•24 Vdc option incorporated for each supply voltage version
•Compact 22,5 mm housing
669-5774 1 phase 0,55 kW
669-5777 1 phase 0,18 kW
669-5780 1 phase 2,2 kW
669-5786 1 phase 1,5 kW
669-5799 3 phases 0,18 kW
669-5803 3 phases 3 kW
669-5809 3 phases 2,2 kW
669-5812 3 phases 4 kW
669-5770 1 phase 0,37 kW
669-5783 1 phase 0,75 kW
669-5796 3 phases 0,75 kW
669-5792 3 phases 0,37 kW
669-5806 3 phases 1,5 kW
ALTIVAR ATV12 SeRIeS•Selectable Profiles: Standard, Performance or
Fan/Pump
•Preset Speeds
•Free Wheel or Fast Stop
•S ramping, U Ramping or switchable between ramps types
•Jog Operations
•Underload and Overload Detection
•Logic State Visible on the Front Display
•Error Logging
447-3840 with roller plunger
MINIATURe TYPe LIMIT SWITCH•Wired terminals
•1 NO and 1 NC contact
•Pre-cabled (1 m)
•Rated at: 240 Vac 1,5 A
330-8672 1 NO 2 position stay put selector switch
330-8688 1 NO & 1 NC 2 stay put selector switch
330-8694 2 NO 3 position stay put selector switch
330-8701 2 NO 3 spring return selector switch
330-8723 1NO 2 position stayput key switch
330-8739 3 position stayput centre keyremoval,2NO
330-8745 1 NO 2 position stayput key switch
330-8751 1 NO 2 position spring return key switch
SeLeCTOR SWITCHeS, XB4-B•Standard black handle selector switches
•Screw clamp terminal connections
•Supplied with contact blocks
2322 For more products visitRS AUTOMATION SOLUTIONS www.rs-components.com RS AUTOMATION SOLUTIONS
SCHNeIDeR eLeCTRIC WeIDMULLeR
615-2365 Zelio USB progamming cable
469-2300 Serial 9-way connection for Zelio software
ZeLIO USB PROGAMMING CABLe•USB or 9-way D connecting cables
469-2271 Zelio programming software
ZeLIO SOFTWARe•Multi-lingual Windows-based programming software for Zelio 2 Logic Controllers
407-2021 0,05 sec-300 hr
SPDT 6 FUNCTION TIMeR•Functions - 111, 211, 421, 511, 611, 612
•External control for start/suspension of time delay
•Sealable transparent cover protects settings
•LED indication of time and relay energisation
•22,5 mm wide
468-4422 24 Vdc 6 inputs 4 outputs
479-6137 24 Vdc12 inputs 8 outputs
468-4438 24 Vdc 8 inputs 4 outputs
468-4450 100-240 Vac 8 inputs 4 outputs
468-4472 24 Vdc 12 inputs 8 outputs
468-4466 24 Vdc 12 inputs 8 outputs
468-4494 100 - 240 Vac 12 inputs 8 outputs
479-6121 24 Vdc 12 inputs 8 outputs
479-6070 24 Vdc 8 inputs 4 outputs
468-4444 100 - 240 Vac 6 inputs 4 outputs
479-6058 12 Vdc 8 inputs 4 outputs
479-6064 24 Vdc 8 inputs 4 outputs
468-4488 100-240 Vac 12 inputs 8 outputs
479-6159 12 Vdc 12 inputs 8 outputs
ZeLIO COMPACT PLC MODULe•Fixed input/output block sizes, 10 I/O, 12 I/O and 20 I/O
•Display and Keypad
•Password security
711-0022 3.4" Graphical Touchscreen green/or/red
711-0031 3.4" Graphical Touchscreen pink/wht/red
711-0034 3.5" Colour TFT Graphhical Touchscreen
721-1474 5.7" Colour TFT Graphhical Touchscreen
TOUCHSCReeN PANeLS•Fast mounting system tool free installation
•Terminals are mounted easily onto your enclosure using spring clips
•USB memory stick for application downloads
•Removable power connector
•An RJ45 connector for the Ethernet TCP/IP 10BASE-T/100BASE-TX link
505-5803 ATS01N103FT 3 A
505-5819 ATS01N109FT 6 A
ALTISTART SOFT START•May be used with single or three phase motors
286-4238 M5 tapped hole
286-4244 M6 tapped hole
286-4250 M4 tapped hole
TOP HAT DIN RAIL MOUNT BRACKeT•Material cold rolled steel
•Suitable for use with power supplies, relay bases, control modules
•Supplied in pack of 10
220-4131 WDU 2.5N lowprofile std terminal, 1,5 mm2 Pack of 10
220-4147 WDU 2.5N blue standard terminal, 24 A Pack of 10
268-1639 2 way push-in jumper bar for terminal Pack of 5
268-1645 10 way push-in jumper bar for terminal Pack of 5
489-5278 Orange W series std terminal, 32 A 800 V 4 mm Pack of 10
489-5341 Orange end cover for W series DIN terminal Pack of 5
489-5379 Blue end cover for W series DIN terminal Pack of 5
STANDARD FeeDTHROUGH TeRMINALS•The ’W’ series screw clamp terminals are
suitable for ’Top Hat’ DIN rail
•Manufactured from nylon 6,6
•Self-extinguishing to UL94 V-0 and free from cadmium and halogen
226-0074 2 way 2,5 mm
226-0080 10 way 2,5 mm
JUMPeR BAR FOR DIN TeRMINAL•The 10 way jumper can have contacts selectively broken off
to omit some terminals from connection
•Jumper bars fit flush into the terminals and are capable of carrying the terminals rated current
•Supplied in pack of 5
225-9894 ZDU2.5 beige 2,5 mm 24 A
225-9923 End cover for ZDU2.5
STANDARD TeRMINALS•Quick & easy installation as the conductor is simply inserted by use of a
clamping system
•Designed to compliment the ’W’ screw series the screwless ’Z’ series DIN mounting terminals offers a top entry system that saves time and space
•Supplied in pack of 5
226-0024 ZDU 2,5/4 AN 2in/2out DIN rail terminal
226-0030 End cover for ZSI 2,5 fuse terminal
2 IN 2 OUT TeRMINALS•For End Cover use stock no. 226-0030
•Current rating 24 A
•SUpplied in pack of 5
533-0429 MAS J thermcouple
533-0435 MAS K thermcouple
533-0441 MAS PT100 RTD
MICRO ANALOGUe SIGNAL CONDITIONeR•Universally adjustable via DIP switch
•2 way isolation between input/output and supply
•Low power consumption
•Screw connection
2524 For more products visitRS AUTOMATION SOLUTIONS www.rs-components.com RS AUTOMATION SOLUTIONS
WeRMA SIGNAL TeCHNIK SOUNDeRS & BeACONS
382-7410 Red permanent light static beacon, 7 W
382-7426 Green permanent light static beacon, 7 W
382-7432 Yellow permanent light static beacon, 7 W
382-7448 Clear permanent light static beacon, 7 W
382-7454 Blue permanent light static beacon, 7 W
382-7460 Red LED light static beacon, 24 Vdc
382-7476 Green LED light static beacon, 24 Vdc
382-7482 Yellow LED light static beacon, 24 Vdc
382-7577 Red LED light static beacon, 230 Vac
382-7583 Green LED light static beacon, 230 Vac
382-7599 Yellow LED light static beacon, 230 Vac
382-7606 Clear LED light static beacon, 230 Vac
382-7612 Blue LED light static beacon, 230 Vac
382-7634 Static beacon adaptor for tube mounting
423-1652 Installation foot for beacon
314-7382 Stacking beacon replacement bulb, 5 W 24 V Pack of 10
STATIC INSTALLATION BeACON - 800 SeRIeS•Suitable for panel mounting applications
•Polycarbonate caps have a shock resistance of 20J according to ENV50014
•Tube mounting adaptor available
•Vandal proof
478-3894 LED stacking beacon, red/yellow/green
478-3901 LED stacking beacon, red/green
478-3917 LED stacking beacon, red/yellow/green
478-3923 LED stacking beacon, red/yellow/green M12
478-3939 LED stacking beacon, red/yellow/green M12
478-3945 LED stacking beacon, red/yellow M12
478-3951 Beacon fixing bracket
478-3973 Beacon M20 x 1,5 cable gland
478-3989 Beacon base with tube
TYPe 693 - BLACK CASING 36 MM•Can be operated with PLC control system
•LED permanent light (up to 50000 hours)
•Plastic housing
•IP65 rating
•Available with 2 m cable or M12 plug connection
•Optional base with integrated tube
•Operating temperature range -20°C to +50°C
466-8846 Red 24 Vdc 50 mA
466-8852 Yellow 24 Vdc 50 mA
466-8868 Red 230 Vac 12 mA
466-8874 Yellow 230 Vac 12 mA
LeD/BUZZeR COMBINATION 150•LED beacon with integral buzzer that can be activated optionally
•Starting Current: <0,5 A
•Life duration: <50000 hrs
•Protection: IP65
•Designed for industrial use on equipment using standard front panel 22,5 mm mounting holes
•Continuous use
•Supplied with screw terminal connector and sealing gasket
360-0552 12 Vdc
360-0568 24 Vdc
360-0574 230 Vac
TRUMPeT HORN 570•Medium size trumpet horn for internal or external use
•Very loud, 108 dB
•Continuous tone 100 Hz (ac) 150 Hz (dc) version
678-2981 Red/Green 24 Vdc
678-2985 Red/Green 115-230 Vac
678-2994 Red/Yellow/Green 24 Vdc
678-2997 Red/Yellow/Green 115-230 Vac
LeD TRAFFIC LIGHT/SIReN COMBINATION - 494 SeRIeS•High visibility LED Traffic Light with integrated siren
•Unmistakable signalling even in direct sunlight using clear lenses
•Sound output up to 80 dB
•Continuous 50 Hz tone
•Simple mounting using integrated mounting bracket
•Good sideway visibility
•Wall mounting
436-1646 Medium/high o/p DIN base beacon, 12/24 Vdc
436-1668 Medium/high o/p DIN base beacon, 230 Vac
X400/401 SeRIeS XeNON•Din 3 point fixings
•Single or double flash option
•Suitable for surface or wall mounting
•360° visibility
•IP65 rating
•Lens must be ordered separately
365-8040 Filament bulb rotating beacon, 230 Vac
365-8012 Halogen bulb rotating beacon, 24 Vdc
R400/401 SeRIeS ROTATING•Din 3 point fixings
•Optional M20 side-entry conduit knockout
•Suitable for surface or wall mounting
•360° visibility
•IP65 rating
•Lens must be ordered separately
674-2012 LED beacon w/ buzzer, Red, 230 Vac
674-2016 LED beacon w/ buzzer, Amber, 230 Vac
674-2019 LED beacon w/ buzzer, Amber, 24 Vdc
674-2025 LED beacon w/ buzzer, Red, 24 Vdc
LeDA125 SeRIeS LeD•LED long life
•Continuously rated
•Combined audible & visual signal
•3 point fix
•IP rating 65
422-315 High o/p flange mount siren, 116 dB 240 Vac
422-321 High o/p flange mount siren, 126 dB 240 Vac
289-2003 Motor driven vertical mount siren, 230 Vac
SIReNS•Continuously rated motor, and suitable for fire installations to BS5839
•May be pulsed
•Image refers to s/n 422-315 and 289-2003
•Cast aluminium housing for s/n 422-321 and 289-2003
539-4697 110 dB sounder, 10-60 Vdc
539-4669 Large 120 dB sounder, 110/230 Vac
489-4938 Red shallow wire to base sounder,9-60 Vdc
SOUNDeRS•50 tones with volume control
•2nd and 3rd stage alarms
•From -25° to 70°C operating temperature range
•UL V0 rated fire retardant red polycarbonate case
•IP66 rating
539-4653 105 dB sounder & amber beacon,230 Vac
539-4704 110 dB sounder & red beacon,10-60 Vdc
489-4950 Red shallow wire-base sndr/bcn 17-60 Vdc
489-4966 Red deep wire-base sndr/bcn 17-60 Vdc
SOUNDeR/BeACON•50 tones and volume control
•2nd and 3rd stage alarms
•High power 5 joule xenon beacon
•Separate control of sounder and beacon
•Fire retardant red case
•IP66 rating
27www.rs-components.com RS AUTOMATION SOLUTIONS
BeARINGS STRUCTURAL & CONVeYOR
264-5330 13 mm OD
264-5346 17 mm OD
264-5368 20 mm OD
264-5374 23 mm OD
264-5380 26 mm OD
264-5396 29 mm OD
264-5403 32 mm OD
264-5425 40 mm OD
PLAIN BeARING TYPe UNIVeRSAL JOINTS•Hardened journals with large bearing surfaces help to reduce wear and
prolong the operational life of the joint
•Steel unbored universal joints suitable for application with a maximum speed of 1200rpm
•The soft core enables easy machining of the joints to the required diameters
267-7769 Body diameter 50,8mm Torque 2,83 Nm
CLUTCH - COUPLING MOUNT SeRIeS SO•Shaft mounting design allows two parallel shafts to be coupled and the
armature hub can accommodate a pulley, gear, sprocket etc. to transmit torque to the second shaft
•Coupling mounting types allow end-to-end shafts to be connected
435-2298 100 mm 450 kg Swivel
NYLON POLYAMIDe WHeeL STeeL FORK HeAVY DUTY SeRIeS P60
•Zinc plated body
•Hygienic materials and design
•Corrosion, abrasion and shock resistant
•Wheel series P
267-7680 Body diameter 22,94 mm Torque 0,28 Nm
267-7719 Body diameter 45,21 mm Torque 1,70 Nm
267-7725 Body diameter 50,8 mm Torque 2,83 Nm
CLUTCH - SHAFT MOUNT SeRIeS SL•Shaft mounting design allows two parallel shafts to be coupled and
the armature hub can accommodate a pulley, gear, sprocket etc. to transmit torque to the second shaft
•Coupling mounting types allow end-to-end shafts to be connected
267-7630 Body diameter 88,90 mm Torque 3,95 Nm
267-7595 Body diameter 34,93 mm Torque 0,113 Nm
267-7624 Body diameter 61,87 mm 1,69 Nm
267-7602 Body diameter 44,50 mm 0,339 Nm
FLANGe MOUNT eLeCTROMAGNeTIC BRAKe SeRIeS FSB•The friction disc is coupled to the shaft to be braked, but is capable
of moving axially
•Through several compression springs the axial force acts against the axially moving clapper which compresses the armature against the pressure plate
•Brake torque is generated on both faces of the friction disc
227-0447 80 mm 150 kg Swivel Braked Nylon-Polyamide
227-0453 80 mm 150 kg Swivel Braked Nylon
227-0425 80 mm 150 kg Swivel Un-braked Nylon-Polyamide
NYLON POLYAMIDe WHeeL STAINLeSS STeeL FORK MeDIUM DUTY SeRIeS INOX 20 •Plate fixing castor made from hygienic materials
•Resistant to corrosion, abrasion & shock
•Easy running under heavy loads
•Operating Temperature -30°C to +80°C
•Wheel series P
Many more services when you go online at www.rs-components.com
1More products, more brands, more choice
RS Online gives you instant access to more than 500,000 products and we add new products every month, so you can see the very latest products that won’t appear in a paper catalogue until next year.You’llalsobenefitfrom features that a paper catalogue can’t give you such as access to our data library with more than 100,000 technical documents. If you’re looking for vital information, chances arethatyou’llfinditonline.
2Find the right product
The online easy-to-use search functionality takes you right to the product you’re looking for. You can search by manufacturer part or RS stock number, key words, brand, features or even price. The results are instant, accurate and up to date. All products show stock availability, so you’ll know the quantity you require is in stock.
3Use your online order history for quick reference
If you need to reorder any items, you don’t have to dig out previous order information. It’s right there on our website, in your order history. You can go back as far as 13 months. This also acts as an annual record of your spend with us and you can access it with a click of your mouse.
4Online discounts and no small order charge
By ordering online, our customers have saved hundreds of thousands of pounds with exclusive discounts and special offers. In fact, we’re always offering discounts, so it pays to frequently check RS Online to see if you could make substantial savings on your everyday products. What if your order is small? We don’t think it’s fair to penalise you, there is no minimum order value.
5Great offers, great prices
Befirsttobenefitfromour great monthly offers and deals chosen from over 500,000 products online with thousands of new products being added each month.
With RS Online you'll get everything you're used to seeing in our paper catalogue but faster.
28 29www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
CABLe INTeRCONNeCT & SeNSORSBeARINGS STRUCTURAL & CONVeYOR
285-0403 1 m L x 25 mm
285-0396 1 m L x 20 mm
285-0352 0.6 m L x 10 mm
285-0419 1 m L x 30 mm
285-0380 0,8 m L x 16 mm
285-0368 0,6 m L x 12 mm
423-2403 0,4 m L x 5 mm
LJM STeeL SHAFT•Manufactured from unalloyed grade steels 1.1213 (Cf 53),
1.1210 (Ck 53), 1.1221 (Ck 60)
•Induction hardened & ground
•High dimensional stability & long service life
•Tolerance h6
390-6153 4 mm ID
390-6074 5 mm ID
LBBR BALL BUSHINGS WITHOUT SeALS - CLOSeD•Conforms to Series 1 of ISO10285
•Unsealed bearing is fitted with a non contacting shield to exclude coarse debris
•Supplied in bag of 4
235-2246 Skate wheel 52 mm OD x 6,5 mm bore
235-2230 Plain skate wheel, 48 mm OD x 6,5 mm bore
235-2268 Skate wheel 52 mm OD x 8,2 mm bore
235-2252 Plain skate wheel 48 mm OD x 8,2 mm bore
STeeL SKATe WHeeLS•Steel skate wheels available in plain or ribbed rubber tyre form,
with either 6,5mm or 8,2 mm bore
•May be used with the Standard Track Profile
•Go to www.rs-components.com for more technical details
•Supplied in bag of 10
286-7849 6 mm ID Shielded
442-0032 6 mm ID Sealed
441-9953 8 mm ID Sealed
286-7546 8 mm ID Shielded
441-9969 10 mm ID Sealed
286-7940 12 mm ID Shielded
286-7580 12 mm ID Shielded
441-9981 15 mm ID Sealed 9 mm Width
442-0082 15 mm ID Sealed 11 mm Width
286-7962 15 mm ID Shielded
442-0076 17 mm ID Sealed
442-0010 20 mm ID Sealed
DeeP GROOVe MeTRIC BALL BeARINGS SeALeD AND SHIeLDeD SKF•The seals are made from an oil and wear-resistant synthetic rubber
with a steel reinforcement
•Operating temperature from -40°C to +120°C
•Accepts radial and axial loads
•Both standard and C3 clearance available
286-8476 1 direction 2 mm ID
286-8533 1 direction 30 mm ID
286-8577 1 direction 50 mm ID
286-8460 1 direction 10 mm ID
286-8511 1 direction 20 mm ID
STeeL BALL THRUST BeARINGS, MeTRIC - SKF•Thrust bearings suitable for unidirectional axial loads
•Supplied as three-part assemblies comprising of two grooved outer raceways and a caged ball set
•These bearings are not suitable for radial loads
•Typical applications include vertical shaft bearings, steering columns, etc.
•Go to www.rs-components.com for more technical details
437-2832 2 m x 35 mm - Pack of 2
437-2826 1 m x 35 mm
FLOWAY ROLLeR TRACKS•Zinc plated steel channel track with 25 mm diameter
polyethylene rollers on 33 mm pitch
•Maximum loading is 12 kg per roller
228-2557 NO Close at 50°C
228-2636 NC Open at 50°C
228-2658 NC Open at 15°C
BI-MeTALLIC THeRMOSTATS•Snap action bi-metallic disc operates an SPST contact which is
electrically isolated from the mounting bracket
•All types reset when the temperature falls to nominally 15° below operating temperature
•Phenolic body with stainless steel end cap
•¼in. tab termination
•Contacts are rated to 250 Vac 10 A with a maximum contact resistanceof50mΩ
•Dielectric strength of 2000 Vac
•N/C types open on temperature rise
•N/O types close on temperature rise
228-2529 NC Open at 250+/-11°C
228-2541 NC Openat 200+/-11°C
228-2535 NC Open at 220+/-11°C
HIGH TeMPeRATURe BI-MeTALLIC THeRMOSTATS•Designed specifically for harsh, high temperature environments
•Snap action bi-metallic disc, which is electrically and thermally isolated from the switch, actuates the normally closed contacts
•Ceramic housing with heat sensitive disc retained by a heat conducting stainless steel end cap
•¼in. tab termination
•Contactsareratedto250Vac10Awithamaximumcontactresistanceof50mΩ
•Dielectric strength of 2000 Vac
•N/C types
446-0254 PNP 5-36 Vdc
MY-COM PReCISION POSITION SWITCH•Nickel plated brass housing
•Activating force 75 g
•Switching frequency 10 Hz
•Temperature range -20°C +75°C
•Repeatability ±0.001 mm
228-2513 Open at 70 +/-4°C
228-2579 Open at 90 +/-4°C
228-2591 Open at 120 +/-4°C
228-2608 Open at 100 +/-4°C
228-2614 Open at 150 +/-4°C
MANUAL ReSeT BI-MeTALLIC THeRMOSTATS•Designed for applications that require status indication of over temperature
•Snap action bi-metallic disc, electrically and thermally isolated from the switch, actuates the normally closed contacts
•Manual reset can be operated at approximately 70% of the opening temperature
•Dust-free phenolic housing with heat sensitive disc retained by a heat conducting stainless steel end cap
•¼in. tab termination
•Contacts are rated to 250 Vac 10 A with a maximumcontactresistanceof50mΩ
•Dielectric strength of 2000 Vac
229-5890 NC Open at 60°C
229-5907 NC Open at 50°C
229-5878 NC Open at 80°C
229-5963 NO Close at 70°C
229-5862 NC Open at 90°C
229-5884 NC Open at 70°C
229-5913 NC Open at 30°C
229-5935 NO Close at @35°C
BASIC BI-MeTALLIC THeRMOSTATS•PPS Ryton body with steel end cap
•Electrical terminals parallel to the mounting face and a floating steel bracket to ease mounting and increase temperature tolerance
•N/C types open on temperature rise, N/O types close on temperature rise
•¼in. tab termination
•Contacts are rated to 250 Vac 10 A with a maximumcontactresistanceof50mΩ
•Dielectric strength of 2000 Vac
437-0757 46 mm PNP NO
181-1794 30 mm cabled sensor PNP NO
437-0735 22 mm cabled sensor PNP NO
437-0741 28 mm PNP NO
M8 INDUCTIVe PROXIMITY SeNSORS•Stainless steel body
•2 m PVC Pre-Wired or M8 Plug-In types
•For suitable M8 Plug-In leads see RS stock no. 290-4437
30 31www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
CABLe INTeRCONNeCT & SeNSORSCABLe INTeRCONNeCT & SeNSORS
180-7357 LA55-P 50 A 1:1000
179-6667 LA100-P 100 A 1:2000
451-1324 LA100-P/SP13, 100 A
180-7391 LA55-P/SP1 50 A 1:2000
188-3783 LA125-P 100 A 1:1000
LeM CURReNT TRANSDUCeRS LA-P SeRIeS•Excellent dynamic performance
•Good linearity and low temperature drift
•Galvanic isolation between input and measuring circuit
•PCB mounting
•Body material plastic to UL 94-V0
207-2984 LA-S hall effect 200 A
207-2990 LA-S hall effect 300 A
LeM CURReNT TRANSDUCeRS LA-S SeRIeS•Measurement of continuous, alternating, pulsed and mixed currents
•Galvanically isolated between inputs and measuring circuit
•Self extinguishing plastic housing UL 94–V0
•Operating temperature range -10°C to +85°C
338-9930 100-1000 mm Sensing Distance 20 mA
ULTRASONIC PROXIMITY SeNSOR•Polyester housing
•M12 plug-in connector
•LED indication
•Output slope can be inverted
436-2330 Hall effect 6 A
321-6315 Hall effect 15 A
301-9473 Hall effect 25 A
307-5603 Current transducer kit
LeM CURReNT TRANSDUCeRS LTS - P SeRIeS•Single-pole closed-loop current transducers based on the Hall effect principle
•Voltage output
•3 different input ranges via selection pins
•Compact format for mounting on p.c.b.
•Excellent precision and good linearity
•Low temperature drift
•Body material plastic to UL94-V0
499-5356 LTSR6NP 6A
499-5362 LTSR15NP 15A
499-5378 LTSR25NP 25A
LeM CURReNT TRANSDUCeRS LTSR SeRIeS•AC/DC, and mixed current measurement
•Closed Loop, high accuracy (better than 1%)
•Unipolar 5 V supply
•Different measurement ratings by altering pin configuration
•Compact format
•Excellent precision and linearity
•Low temperature drift
•PCB mounting
339-5480 Red temperature sensitive label 70°C
339-5474 Yellow temperature sensitive label 50°C
HAND HOT INDICATORS•Provides immediate visual indication of hot surface
•Circular self adhesive
•Supplied in pack of 10
260-3718 50 ppr, 10-30 V
260-3724 100 ppr, 10-30 V
260-3768 500 ppr, 10-30 V
260-3774 1000 ppr, 10-30 V
260-3780 1024 ppr, 10-30 V
RI32 MINIATURe eNCODeRS•Low torque/high efficiency with ball bearings
•Body Ø: 30mm
•Go to www.rs-components.com for more technical details
260-3831 500 ppr, 5 V
260-3875 1024 ppr, 5 V
260-3897 2500 ppr, 5 V
260-3910 5000 ppr, 5 V
260-3932 10000 ppr, 5 V
RI58-0 6 MM SHAFT eNCODeRS•Low cost, high specification
•Body Ø: 58mm
•Go to www.rs-components.com for more technical details
455-4696 0-400 bar G 4-20 mA
455-4646 0-25 bar G 4-20 mA
455-4775 0-2200 bar 0,5 V
455-4769 0-1600 bar 0,5 V
455-4747 0-2200 bar G 4-20 mA
455-4731 0-1600 bar G 4-20 mA
455-4703 0-600 bar G 4-20 mA
455-4753 0-1000 bar 0.5 V
455-4680 0-250 bar G 4-20 mA
455-4674 0-160 bar G 4-20 mA
455-4652 0-40 bar G 4-20 mA
455-4630 0-16 bar G 4-20 mA
455-4624 0-10 bar G 4-20 mA
455-4719 0-1000 bar G 4-20 mA
PReSSURe TRANSMITTeR - MINIMAP (DIN), SeRIeS 1000•Wetted 17-4 PH stainless steel
•IP65
•High stability - no drift
•No need for re-calibration
•No internal 'O' ring seals
•Mating connector supplied
•0,25% FS accuracy
•-40 to + 120°C range
•Mini Din 43650C GDS connection
•3x FS proof pressure
•L62 mm D20 mm
291-4226 100 ppr, r10-30 Vdc
291-4248 500 ppr, 10-30 Vdc
291-4210 50 ppr, 10-30 Vdc
291-4254 1000 ppr, 10-30 Vdc
RI38 UNIVeRSAL MOUNTING eNCODeRS•Low torque/High efficiency with ball bearings
•Body Ø: 39mm
•Go to www.rs-components.com for more technical details
291-4311 1000 ppr, 10-30 V
291-4349 5000 ppr, 10-30 V
291-4355 10000 ppr, 10-30 V
291-4305 500 ppr, 10-30 V
291-4327 1024 ppr, 10-30 V
291-4333 2500 ppr, 10-30 V
RI58-0 10 MM SHAFT eNCODeRS•Low cost, high specification
•BodyØ: 58mm
•Go to www.rs-components.com for more technical details
Our full range of Automation products can be found online.
www.rs-components.com
32 33www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
FLUID MANAGeMeNTFLUID MANAGeMeNT
228-1986 GFS nylon, 100 VA
228-1992 GFS polypropylene, 100 VA
GeNeRAL PURPOSe HIGH POWeR FLOAT SWITCHeS•Can be used for 'normally open' or 'normally closed' operation,
depending on orientation
•All units WBS approved, product for use in hot and cold water
•Minimum liquid SG 0,8
•Nitrile gasket
•Length: 94 mm
348-7983 25&75 mm
348-8021 25&175 mm
348-8015 25&150 mm
348-7999 25&100 mm
348-8009 25&125 mm
VeRTICAL FLOAT SWITCHeS – DUAL SWITCHING POINT•These types provide two independent switch outputs,
one for upper level and the other for lower level, in one device
•N/C lower float position opens on rising liquid
•N/O upper float position closes on rising liquid
•All units WRAS approved for use in hot and cold water
•Can be extended using pre-made extension tubes (see stock no. 492-8996)
268-0557 M10 1,8 - 5,4 kg
268-0563 M10 4,6 - 13,6 kg
268-0585 M12 2,7 - 36 kg
366-3238 M8 0,3 - 2,7 kg
366-3244 M8 0,7 - 5 kg
ACe SeLF-COMPeNSATING MINIATURe SHOCK ABSORBeRS TYPe MC•Handles effective weights from 0,3 kg to 36 kg
•Includes button
•Integral mechanical stop in front end of unit
•Operating temperature range 0°C to +65°C
•Impact velocity range 0,15 m/s to 5 m/s
431-8399 1/8 inch BSP internal Pre-wired
431-8406 ½ inch NPT External Pre-wired
454-9105 ½ inch NPT External Plug-in Connector
HORIZONTAL FLOAT SWITCHeS•304 grade stainless steel construction, ideally suited for use in
aggressive environments
•Consists of reed switch and pivoted actuator magnet
•High temperature operation (120°C)
•0,5 m XLPE cable
•0,8 mn SG of liquid
•User configurable N/O or N/C operation by rotating through 180°
454-9111 SSF26X035
STAINLeSS STeeL HIGH TeMPeRATURe FLOAT SWITCHeS•Suitable for use in hot oils and other liquids used in food processing
•Capable of working at temperatures up to 200°C
•Top mounting (Internal)
•Reversible switching action (N/O or N/C)
•10 bar max. pressure
•350 mm XLPE cable
•14 mm mounting wall thickness
366-3424 9-1700 kg
366-3430 13-2500 kg
ACe MAGNUM ADJUSTABLe SHOCK ABSORBeR•New generation of industrial shock absorbers
•50% increased energy absorption capacity
•Front and rear adjusters
•Extremely long operating life
•Fully threaded steel outer body with Weartec - plus (harsh environment) finish
•Wide effective weight range - 9 to 15000 kg
•Integrated positive stop and hardened main bearing
667-9078 DC 30/5 35 l/min 60W
446-3461 DC 15/5 6,4 l/min 25W
DC CeNTRIFUGAL PUMPS•For drink vending machines and water re-circulation duties in beverage,
agricultural, automotive, print, photographic and industrial applications
•Lightweight and compact
•Specific gravity 1 Centipoids maximum
•Maintenance-free operation
616-2693 0,1 to 2,5 l/min
667-9122 32 l/min 12 V
667-9126 32 l/min 24 V
667-9129 18 l/min 24 V
667-9110 18 l/min 12 V
LVM SUBMeRSIBLe/INLINe PUMPS•Suitable for fresh water, sea water and diesel
•Maximum liquid temperature 80 deg C
•Hose barb connection
395-7050 Series 1900 G ¼ PVC cable
395-9343 Series 1950 G ¼ SPST PVC cable
395-7094 Series 1950 G ¼ SPST PTFE cable
395-7088 Series 1950 G ¼ SPDT Silicone cable
395-7066 Series 1750 G 1/8 PVC cable
395-7072 Series 1950 G ¼ SPST Silicone cable
395-7044 Series 1700 G 1/8 PVC cable
MeTAL LeVeL SWITCHeS•With large float displacement, switch withstands rough service
•Series 1700: float material Buna N, SPST 50 VA
•Series 1750: float material stainless steel, SPST 50 VA
•Series 1900: float material Buna N, SPST 100 VA
•Series 1950: float material stainless steel, SPST 100 V, SPDT 20 VA
395-6984 3,8 l/min (water)
395-7038 140 l/min (air)
395-7016 70 l/min (air)
395-7000 28 l/min (air)
395-6978 1,9 l/min (water)
395-6990 12 l/min (air)
395-6940 0,2 l/min (water)
395-6962 1 l/min (water)
NORMALLY OPeN LOW FLOW SWITCHeS•Constructed from ‘Noryl’ with stainless steel spring
•Pressure rating 10 bar maximum
•Switching voltage 240 Vac or 120 Vdc
•Max switching power 20 VA
•Operating temperature 100°C maximum
•¼in. BSP male connections
•Metered piston and spring combination, enabling fitting in any position
•Very low flow settings and low pressure drop
•Complete with 300 mm, 22 Awg PVC lead wires
366-3345 Applicable weight range 1-109 Kg
MINIATURe TYPe MA SHOCK ABSORBeR•Locking, calibrated adjustment facility
•Integral positive stop
•Includes lockout and button
•Steel body with Weartec – Plus (harsh environment) finish
•Hardened stainless steel piston rod
•Universal mounting and stop collar attachments available separately
TURBINe FLOW SeNSOR - FT-210•Mountable in any position
•Mini DIN connector included
•Grilamid TR55 housing, Turbine PA 12 Ferrit, bearings PTFE/Graphite
•Can be used with dark liquids
•High pulse count, high resolution
•Fast response time
•Accuracy ±3% of reading
•Frequency 36,6 - 916,66 Hz
•Mating connector supplied
3534 www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
LOW VOLTAGe SWITCHGeARLOW VOLTAGe SWITCHGeAR
511-5321 12 V adjustable 78 W
511-5371 24 V adjustable 600 W
511-5365 24 V adjustable 360 W
511-5359 24 V adjustable 180 W
511-5337 24 V adjustable 90 W
511-5343 12 V adjustable 156 W
78 W TO 600 W TSP SeRIeS PSU•True Industrial Grade design
•Rugged metal case for harsh industrial environments
•Fits on to 35 mm DIN Rail
•Adjustable Output Voltage
•Remote On/Off
•Shock and vibration proof
285-7549 Fixing tool for pushbutton
285-7555 Bulb insertor/extractor for pushbutton
FIXING TOOL AND LAMP TOOL•Fixing tool has castellated head to fit the lock nuts on all units to aid tightening
•The lamp tool is for inserting or removing lamps
261-8221 Handle with door Defeater 78 x 78 mm IP66
261-8243 Extension shaft 78 x 78 mm IP66
261-8259 Handle (base Mounting ) 67 x 67 mm IP65
HANDLeS AND SHAFT FOR SWITCH DISCONNeCTORS•The defeater mechanism allows a screwdriver to be inserted to release
the lock and open the door with the mechanism in the ON position
•2-hole fixing
285-9933 2 pole on/off cam switch 20 A
285-9955 4 pole on/off cam switch 20 A
285-9949 3 pole on/off cam switch 20 A
PR12 SWITCHeS•Complete with engraved plate and handle
•Finger-proof backward facing terminals
•Simple mounting method
•On/Off, Changeover, Ammeter and Voltmeter Switches
•48 mm x 48 mm switch front
472-9957 Grey air operated hand-held actuator
472-9963 Blue air operated hand-held actuator
472-9979 Bulkhead connector for hand-held actuator
HAND HeLD ACTUATOR•Bellows actuation, offers waterproof solution
•Soft touch buttons
670-0699 Power Supply redundancy 24 V 10 A
479-2371 1 phase 12-15 V 480 W 15A
479-2387 1 phase 48-56 V 240 W 5 A
479-2393 1 phase 24-28 V 730 W 30 A
483-5951 1 phase 24-28 V 120 W 5 A
670-0680 Power Supply dual redundancy 24-28 V 30 A
670-0686 Power Supply single range 30,5 V 2,8 A
479-2365 1 phase 12-15 V 40 W 3A
670-0696 Power Supply redundancy 24 V 5 A
454-2182 3 phase 24-28 V 490 W 20 A
670-0692 Power Supply redundancy 24 V 2,5 A
468-3390 1 phase 24-28 V 240 W 10 A
468-3003 3 phase 24-28 V 960 W 40 A
468-2971 1 phase 24 V 60 W 2,5 A
454-2176 3 phase 24-28 V 240 W 10 A
454-2160 3 phase 24-28 V 120 W 5 A
454-2154 1 phase 24-28 V 480 W 20 A
454-2148 1 phase 24-28 V 240 W 10 A
454-2126 1 phase 48-56 V 480 W 10 A
454-2104 1 phase 48-56 V 240 W 5 A
454-2097 1 phase 24-28 V 480 W 20 A
468-2993 1 phase 24 V 120 W 5 A
SILVeRLINe SeRIeS WITH POWeR BOOST•3-phase units SL10 & SL20 offer a choice of overload response. In FUSE mode,
in the event of an overload the unit switches off, in CONTINUOUS mode the unit will offer up to 80% more current at a reduced output power
•Integral input fuse; electronic output protection
•Option available for operating in parallel using jumpers
•Output LED indication
•Adjustable output voltage
•Patented quick and easy assembly on to DIN rail
•Power boost feature
•Permanent 25% extra power at 45°C
479-2359 24-28 V 50 W 2,1-1,8A
50 W MINILINe SeRIeS PSU•Input frequency range 47-63 Hz
•Fully regulated output
•Permanent 25% extra power at 45°
•Screw Terminals
•Output LED indication
•Paralleling capability
454-2198 24 V 100 W 4 A
DeVICeNeT POWeR SUPPLY•Input 115/230 Vac, 210-375 Vdc
•100 VA limited power source
•No switch off at overload
•Suitable for use in harsh environments
670-0661 24-28 Vdc 15 W
670-0658 5-5,5 Vdc 15 W
670-0652 12-14 Vdc 15 W
459-6117 12-15 Vdc 100 W
424-6323 24 Vdc 100 W
424-6294 12-15 Vdc 50 W
424-6288 24 Vdc 50 W
424-6272 +/-12 +/-15 Vdc 30 W
424-6266 10-12 Vdc 30 W
424-6250 5 Vdc 30 W
424-6244 24 Vdc 30 W
424-6317 24 Vdc 70 W
15 W TO 100 W SWITCH MODe MINILINe SeRIeS PSU•Miniature size and lightweight
•Spring clamp terminals
•72 W and 100 W meet PFC standard EN61000-3-2
•Adjustable output voltage
•Overload and short circuit protected
•Output LED indicator
•Suitable for use in harsh environment
670-0642 24-28 Vdc 8,6-10 A
670-0646 24-28 Vdc 4,3-5 A
670-0649 24-28 Vdc 3,3 A
DIMeNSION C-SeRIeS PSU•Wide range auto select input
•Minimal inrush current
•20% Power reserves up to 45°C continuously allowed
•CS10.242 has power factor correction to EN61000-3-2
•DC-ok LED
670-0668 24-24,5 Vdc 8 A
514-5552 24-28 Vdc 5 A
670-0677 24-28 Vdc 20 A
670-0683 24 Vdc 3,8 A
670-0674 48-55 Vdc 10 A
670-0670 36-42 Vdc 13,3 A
514-5625 48-55 Vdc 10 A
514-5619 36-42 Vdc 13.3 A
514-5603 24-28 Vdc 20 A
514-5580 48-56 Vdc 5 A
514-5568 12-15 Vdc 15 A
514-5574 24-28 Vdc 10 A
DIMeNSION q SeRIeS PSU•Single-phase or three-phase units from 80 to 960 W
•Active power factor correction
•Minimal inrush current
•50% power reserves for typ. 4s
•Quick-connect spring-clamp terminals
•DC-ok LED, overload LED and relay contact
•DC Input from 88-375 V for single phase
•Active filtering of input transients
•Short term operation down to 60 Vac and up to 300 Vac
24 W TO 240 W TCL SeRIeS PSU•Compact and light weight (plastic case)
•Fits onto 35 mm DIN-rail EMI complies with EN55022-B, FCC-B
•Adjustable output voltage
•Parallel operations listed
•Power 'good' signal
•Output LED indicator
•Overload/over-voltage protection
466-7023 48 V 60 W
434-2847 12 V 60 W
511-5315 12 V 24 W
667-0838 24 V 240 W
511-5309 5 V 24 W
466-7017 24 V 24 W
457-3035 24 V 120 W
434-2853 24 V 60 W
457-3029 12 V 120 W
36 37www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
PROCeSS CONTROLLOW VOLTAGe SWITCHGeAR
382-1024 SPDT plastic bodied foot switch 3 A
PLASTIC BODIeD FOOT SWITCH•SPDT, momentary footswitch with integral non-slip base pad
•Cable & contacts module
•Complete with 2 m of cable
•Contact rating 24 V ac/dc 3 A
208-3265 Guarded double action
211-0711 Single non-latching guarded
228-2103 Guarded potentiometer
HeAVY DUTY GUARDeD FOOT SWITCHeS•Non-latching and alternate action versions which are guarded to prevent
accidental operation
•Guard constructed from die cast aluminium alloy on the single version and pressed steel on the double version
•Screw terminals and self-lifting clamp for connection of leads 2x1,5 mm2 or wire up to 2x2,5 mm2
•Sealed to IP67
238-1064 1NO 1NC frontmount
238-1070 2NO 2NC front mounting
238-1092 4 NO front mounting
238-1115 1 NO side mounting
MCS AUXILIARY CONTACT MODULeS•10 A rated (AC1)
•Blocks per contactor 2 side + 1 top (max. 8 contacts)
•Min. switching 17 V 5 mA (DIN 19240)
218-4245 Unsealed 3 A
218-4267 Sealed Grey 3 A
251-2224 Sealed Yellow 3 A
325-2686 Sealed Red 3 A
325-2692 Sealed Green 3 A
325-2715 Duel grey sealed 3 A 2 NO
513-5139 Medically approved 3 A
513-5145 Dual Medically approved
FRONT HINGeD, LOW PROFILe FOOT SWITCHeS•Foot or palm operation
•Momentary (non-latching) action with SPDT contacts
•Supplied with 2 m of cable
•Dual version - 2 N/O contacts with common connection
•Physical barrier between pedals prevents accidental simultaneous operation
489-4887 2N/C 90° actuator
INTeRLOCK SWITCH eLF 3•Miniature tongue-operated safety interlock with 2 sets of contacts, particularly
useful for light duty sliding and small radii hinged machine guards
•Dual entry and rotatable head allows up to 8 options for actuator entry position
•Forced guided contacts - complies with EN 1088, IEC 947-5-1
•IP67 rated
•Dimensions: H25 x W29 x D75 mm
261-7622 6 Pole 32 A 15 kW
261-7638 6 Pole 40 A 18,5 kW
261-7616 6 Pole 25 A 11 kW
261-7587 3 Pole 63 A 22 kW
261-7571 3 Pole 40 A 18,5 kW
261-7565 3 Pole 32 A 15 kW
261-7559 3 Pole 25 A 11 kW
261-7672 6 Pole 100 A 45 kW
SWITCH DISCONNeCTORS MCS RANGe•Manufactured from thermo-resistant and self-extinguishing materials
(UL94-VØ) which are free from Cadmium, Halogen and Asbestos
•3 pole versions are complete with handle
•IP65
208-2739 1/32 DIN 85-264 V
208-2745 1/16 DIN 85-264 V
SeRIeS 2100 TeMPeRATURe CONTROLLeRS•1/32 DIN (48 x 24 mm) and 1/16 DIN (48 x 48 mm) options
•Up to 3 internal 'soft' alarms
208-2751 1/16 DIN 1 master relay 0 logic output
208-2789 1/16 DIN 1 master relay 1 logic output
208-2880 1/16 DIN 2 master relays
SeRIeS 2200 TeMPeRATURe CONTROLLeRS•Dual display
•Special cooling algorithms
•Digital inputs for auto/manual and second set point select
•Up to 4 internal 'soft' alarms
313-2813 Indicator unit 240 Vac
313-2829 Indicator & alarm unit 240 Vac
2108I INDICATOR & ALARM UNIT•RTD input Pt100 (3-wire)
•Standard 1/8 DIN panel size
•Two alarm relay outputs are provided from up to three internal software alarms
•Three alarm setpoints - separate warning and shut-down limits
•Panel sealing: IP54, plug in from front
•Dimensions: H48 mm x W96 mm, depth behind panel 103 mm, panel cut-out 92 mm x 45 mm
380-8633 12 V 20 W
380-8649 24 V 20 W
TYPe 111 GeAReD DC MOTORS•Output Torque: 5Nm
•Power Rating: 20 W
•Normal Running Speed: 40 rpm
313-2807 Indicator & alarm unit 20-29 Vac/dc
313-2784 Indicator unit 85-264 Vac
313-2790 Indicator & alarm unit 85-264 Vac
2132I 1/32 DIN INDICATOR & ALARM UNIT•RTD input Pt100 (2-wire)
•Compact 1/32 DIN panel size (Panel cut out 24 x 48)
•Any combination of the 3 internal alarms can activate the relay output
•Latching or non-latching operation can also be selected
•Panel sealing: IP65, plug in from front
•Dimensions: H24 mm x W48 mm, depth behind panel 103 mm, panel cut-out 2212 mm x 45 mm
312-1863 1/16 DIN SSR/relay o/p
TeMPeRATURe CONTROLLeR•Green top display shows measured process variable. Bottom display in
orange to show set-point value
•dAC function to minimise overshoot
•5 alarm configurations, full scale high/low, deviation high/low, band
•One ramp and one soak segment
•Two-wire PT100 or thermocouple sensor input
•51 x 51 mm front panels (45 x 45 mm panel cutout)
38 39www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
PROCeSS CONTROLPROCeSS CONTROL
250-0108 1-relay J/K type
438-8405 2-relay NTC
438-8477 S/steel NTC probe 1,5 m cable
250-0085 1-relay Pt100
250-0091 2-relay Pt100
DIGITAL TeMPeRATURe CONTROLLeRS•Direct, Reverse or Heat + Cool + Dead-band control actions
•IP65 rated
•Dimensions: H33 x W75 x D64 mm, panel cut-out 71 mm x 29 mm
338-4187 24 Vdc
338-4200 115-230 Vac
FReqUeNCY TO ANALOGUe SIGNAL CONVeRTeRS•PNP/NPN and NAMUR input in 5 ranges
•Output selectable by terminals
•Offset and gain adjustable by ±5%
•LED indication when input is 5% of set range
•Galvanically isolated supply/output
418-6906 24 Vdc 16 A 7,5 kW
418-6940 24 Vdc 37A 20 kW
SMC3 CONTROLLeRS•Built in DIP switch-selectable electronic overload protection
(Trip class 10, 15 or 20)
•Adjustable overload setting by means of rotary dial
•Built-in bypass
•Designed for full integration with the Allen-Bradley MCS range
•DIP switch-selectable starting methods: soft start 2 to 15 seconds, current, limit, kick-start
•Phase rotation checking
•Fault detection
704-8138 2,4 inch TFT Colour
704-8131 2,8 inch TFT Colour
TOUCHSCReeN PANeL MeTeRS•Simple USB interface for set up for configuring and programming the meter
•User customisable colours, labels, scaling and power up 'splashscreen'
•Simple panel mounting with screw terminal connections
324-0734 230 Vac
324-0740 12-48 Vdc
PROCeSS SIGNAL CONVeRTeRS•Galvanic isolation inputs to outputs
•Input signal selection via front panel switch
•Output selection by connection
•Offset/gain span adjustable, via front panel, ±5%
348-7882 Adjustable set point 230 Vac
348-7898 Adjustable set point 24 Vdc
THeRMOSTAT ReLAYS•Monitoring or control of temperature - 50°C to +300°C in 5 ranges
•Compensated 3-wire PT100 sensor operation
•Adjustable setpoint
•Hysteresis adjustable ±0,5% to 20% of selected range
•Inversion of the relay contact function - heating/cooling control
•LED indication of probe failure
229-3434 90-264 V SPDT Control Relay
229-3428 24-48 V SPST Relay
258-0823 24 V SPDT Control relay, Alarm relay
258-0817 90-264 V SPDT Control relay, Alarm relay
Temperature Control Solutions
6500 BASIC PID CONTROLLeRS•Selectable display of actual temperature, set point value and alarm value
•Easy Tune (PID) or On-Off
•Adjustable PV offset and output cycle times
•Configurable for thermocouple or RTD
•LED status and alarm indication
•Alarm value in operator mode
•Panel cut-out 45 x 45 mm
•IP66/NEMA 4 rated
•Inputs: Thermocouple J,K,T,L & N
•RTD: 3 Wire Pt100
•Outputs: Control & alarm relays SPDT 2 A resistive at 240 Vac
455-0335 RS485 comms card, PA1-W06-S140
455-0329 Plugin Vdc/mA card, slot 2/3 PO2-C21-S140
455-0307 Plugin relay card, slot 2/3 PO2-C10-S140
455-0290 Plugin SSR card, slot 1 PO1-C50-S140
Temperature Control Solutions
OPTIONAL MODULeS FOR USe WITH P SeRIeS•Models are supplied preset to thermocouple and are configurable to other
universal inputs, RTD, mA, mV and V
•No extra parts are required
196-6311 1/32 DIN 24 V
SeRIeS 3200 PID DIGITAL TeMPeRATURe CONTROLLeR•5 alarm configurations, full scale high/low, deviation high/low, band
•Heat-cool strategy
•IP65 protection from front fascia
•CE marked in compliance to relevant European Directives
•Dimensions: H24 x W48 x D102 mm, panel cut-out 45 x 22 mm
454-2205 100-240 Vac relay O/P
454-5068 100-240 Vac, 4-20 mA O/P
Temperature Control Solutions
6100+ SeRIeS TeMPeRATURe/ PROCeSS CONTROLLeR - 1/16 DIN•Full PID or On-Off control action
•Broken sensor detection and loop-failure alarm
•Ramping setpoint and dual setpoint selection
•Output 1: Fixed as ordered either relay, SSR, Triac or d.c. linear (selectable for mV, mA, Volts)
•Output 2: Configurable as Cool O/P or Alarm via plug-in Relay, SSR or dc Linear modules
•Output 3: Configurable as Cool O/P or Alarm via plug-in Relay or SSR modules, or re-transmit using dc Linear module
•Option slot configurable as an RS-485 communications or dual set-point selection using optional plug in modules
•IP66 and NEMA 4 rated
292-0221 90-264 Vac Green
292-0237 90-264 Vac Red
292-0243 12-30 Vdc / 24 Vac Green
292-0259 12-30 Vdc / 24 V ac Red
Temperature Control Solutions
2300 SeRIeS 1/32 DIN INDICATORS & CONTROLLeRS•Selectable ‘Easytune’ or manual PID adjustment with pre-tune
•PID or On-Off control with selectable hysteresis
•Configurable to other universal inputs, RTD, mA, mV and V
•Control/Alarm 1 Output: re-configurable as relay control with SSR alarm 1 or SSR control with relay alarm 1 (no extra parts required)
•Control and alarm relay SPDT 2 A resistive at 240 Vac
•Control SSR output drive capability 10 Vdc in 500Ωminimum
•Setpoint lock
•IP66/NEMA 4
•Can be used with type J,K,R,S,T,B,& N thermocouples, and with 3-wire Pt100 RTD's
•DC linear input options: 0-20 mA, 4-20 mA, 0-10 mV, 10-50 mV
312-1790 1/16 DIN SSD Relay
312-1835 1/16DIN 2 relays
312-1841 1/32DIN 2 relays
TeMPeRATURe CONTROLLeRS SeRIeS 3300 AND 9300•PID heat – cool strategy
•5 alarm configurations, full scale high/low, deviation high/low band
•One ramp and one soak segment
•Two-wire input terminal
•1/16 DIN types have 51 x 51 mm front panels (45 x 45 mm panel cutout), and 1/32 DIN types have 51 x 28,5 mm front panels (45 x 22,2 mm panel cutout)
40 41www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
TIMe, ReLAYS, WARNING & GUARDINGTIMe, ReLAYS, WARNING & GUARDING
308-0598 SPCO 40 A 12 Vdc
359-6302 SPCO 40 A 24 Vdc
308-0627 SPNO 40 A 24 Vdc
308-0611 SPNO 40 A 12 Vdc
MINI ISO ReLAYS - F4 SeRIeS•Typical applications include: ignition lock, lamp load (headlamps),
exhaust emission control, ABS, etc
•Quick connect 6,3 mm terminals
•Dust cover for IP54 protection
•Limiting continuous current 40 A at 85°C
•Operating temperature range: -40°C to 85°C
171-9317 SPST-NO 30 A 12 V
171-9323 SPST-NO 30 A 24 V
T9 A SeRIeS FLANGe MOUNT ReLAYS•Meets UL873 and UL508 spacing - 1/8" through air, ¼" over surface
•UL class F insulation system standard
•Contact Material: AgCdO
•Operating Temperature: -55°C to +85°C
•Switching Current: 30 A at 250 Vac
•Dimensions: H27, 94 mm, W27, 43 mm, D50, 29 mm
•T9 AS type is immersion washable
329-9871 8 pin DIN & surface socket for MT2 relay
329-9887 11 pin DIN & surface socket for MT3 relay
SOCKeTS AND ACCeSSORIeS FOR MT SeRIeS•DIN rail, surface and chassis mount sockets for 8 and 11 pin MT series relays
•LED indication, diode protection and multifunction timer modules are available for sockets 329-9871 and 329-9887
•All sockets are rated 10 A at 240 Vac
226-3180 2 N/C 1 N/O
LIFeLINe 4 ROPe & PUSH BUTTON eMeRGeNCY STOP SWITCH•Switch lock out on rope pulled and rope slack and push button depressed
•Can be installed along or around awkward machinery such as conveyers to provide a constant access emergency stop facility
•Rope status indicator on switch lid
•Tension Force 188 N lock-out, 103 N running
•Operating Force 125 N (300 mm Deflection)
•Operating temperature -25°C to +80°C
•Safety contact gap 2 x 2 mm
•Rated at 500 V ac/1 A, 250 V ac/2 A, 100 V ac 5 A
•Heavy duty weatherproof die-cast aluminium alloy (LM24) yellow case, sealed to IP66
•Stainless steel eye nut, Glass filled nylon indicator
•Designed to conform to EN418, EN292, EN60947-5-1, ISO 13850, BS 5304
•CE marked in compliance to relevant European Directives
427-1177 Safety switch 2 NC, 440K-T11303
426-4517 Safety switch 1 NC, 440K-T11305
193-0479 Actuator flexible, 440K-A27010
TROJAN T15 INTeRLOCK SWITCHeS•Ideal for guard doors experiencing high levels of vibration
•T15 swivel head allows 4 actuator entry position options: front, rear and end
•Compact at only 75 mm length
•30N lock-out force
•IP67
627-3563 Twist-release E-stop 2NC
800F SeRIeS eMeRGeNCY STOP, MUSHROOM HeAD•Yellow/Black plastic enclosure
•Twist to release operator
•DIN rail in base of enclosure for contact block mounting
341-5146 SPCO relay 10 A 24 Vdc coil
341-5180 SPCO relay 10 A 230 Vac coil
341-5130 SPCO relay 10 A 12 Vdc coil
341-5168 SPCO relay 10 A 24 Vac/dc coil
341-6874 DIN rail socket for IR-C plug-in relay
ReLAYS 10 A C10 SeRIeS•Robust industrial terminal blades
•Bifurcated contact version for low level signal switching
•Din rail socket only 16 mm wide
•Bridge bar available
213-0787 5 A 12 Vdc coil
ReLAY DPCO LATCHING C9 SeRIeS•Contacts remain latched on even after the supply is removed from the 'set' input
•Contacts are switched off by pulsing the 'reset' input
261-3204 529 Codix
ANALOGUe DISPLAY CODIX 529•5 digit, high luminosity LED display
•With adaptor for cut out
•Programmed with 2 keys in front face
•Displayed value storage control input
•Panel cut-out: 22,2 mm x 45 mm
•Operating temperature: -10°C to +50°C
•IP65
300-4752 24 Vdc/ac 2NC
AZM170 INTeRLOCK SWITCH•2 available actuator insertion slots allowing 4 possible actuating directions
•M5 key available for manual release
•IP67
623-2972 AZ15 - 1 NC
362-2782 AZ16 - 1 NO + 2 NC
211-1562 B2 switch actuator, 15°
211-1578 B3 switch actuator
INTeRLOCK SWITCH AZ15/AZ16•Double insulated
•3 cable entry positions
•Large wiring chamber for ease of installation
•Patented roller system giving resistance to contaminants
239-1033 X1 Single Channel 24 Vac/dc 3NO 1NC
239-1049 X2 Dual channel 24 Vac/dc 2NO
239-1055 X2.1 Emergency Stop 24 Vac/dc 2NO
245-1905 XV2 Adjustable Time Delayed 24 Vac/dc 2NO
PNOZ SAFeTY ReLAYS•Feedback control loop for monitoring
external relays/contactors
•LED indication: power, channel input
•DIN rail mounting
•Monitored manual reset
42 43www.rs-components.com RS AUTOMATION SOLUTIONS For more products visitRS AUTOMATION SOLUTIONS
TeMPeRATURe CONTROLeNeRGY SAVING
709-9690 A10 5A 50-500 Vac DIN Rail
709-9697 A10 5A 50-500 Vac DIN Rail with MODBUS communication via RS485
709-9666 A20 5A 50-500 Vac Panel
709-9675 A40 1 / 5A 110-400 Vac/120-350 Vdc Panel
709-9678 A40 1 / 5A 12-48 Vdc Panel
DIRIS MULTI-FUNCTION eNeRGY MeTeR•Multi-measurement and metering (currents, voltages, frequency,
active, reactive and apparent power, power factor)
•Direct acess keys
•THD voltages and currents up to level 51
•Programmable hour meter
•Backlit LCD screen
•Optional aditionnal modules
•Pulse Output/Alarm management
•RJ485 Jbus/Modbus communication
690-3863 Power Meter
690-3867 Wireless Additional Sensor
eFeRGY e2 WIReLeSS eNeRGY MeTeR•Wireless transmission (433,52 mhz) with a typical range of 40-70 m
•Measuring current 50 mA – 95 A
•64 K internal memory (sufficient for 12 months+ of data)
•USB download connection
•Powered by 3xAAA batteries (Not supplied)
723-2232 PAC3100
723-2235 PAC4200
POWeR MONITORING DeVICeS PAC3100 AND 4200•Simple mounting and commissioning
•High IP65 degree of protection permits usage in extremely dusty and wet environments
•Intuitive operation using 4 function buttons and multilingual plain text displays
•Low mounting depth
•Worldwide use
•Go to www.rs-components.com for more technical details
245-5941 HPL110 440 Vac
DIGITAL MOTOR LOAD MONITORS•Units which measure true motor load in kW featuring a digital display of
kW% and programmable trips for over and/or under load events
•These units protect equipment from damage caused by the motor running against a jam, blockage or under load and are also used in processes to trigger subsequent actions when predetermined load levels are reached (end point monitoring)
•The display is used as a reference enabling motor load, trip levels and all other variables to be displayed and programmed quickly and accurately using only three push buttons
713-9925 ATV32 Inverter Drive 0,18 kW 240 V 1 Phase
713-9928 ATV32 Inverter Drive 0,37 kW 240 V 1 Phase
713-9922 ATV32 Inverter Drive 0,55 kW 240 V 1 Phase
713-9931 ATV32 Inverter Drive 0,75 kW 240 V 1 Phase
ALTIVAR ATV 32 SeRIeS INVeRTeRS•Built-in Bluetooth link
•Easy-fit communication cards in cassette format
•STO: Safe Torque Off safety function
•SLS: Safely Limited Speed safety function
•SS1: Safe Stop 1safety function
•150 further functions, including application-specific functions (conveying, cutting, hoisting, etc)
714-0023 24-240 Vac SPDT
714-0032 24-240 Vac DPST
DIGITAL TIMe DeLAY ReLAY•Flexible functionality with wide range applications
•17 functions
•Tamper proof with key lock function
•Selectable up/down counting modes - to show elapsed/remaining time
•3 Digit LCD for preset time and run time
•Clear LED indication of relay status
RS have launched a compact 1⁄16 DIN format, cost-effective temperature and process controller with enhanced capabilities including setpoint programming.Investing in modern temperature control equipment can provide returns instantly, improving product quality, consistency and reducing energy waste. The RS PID controller has been created to be easy to configure and install making it ideal for retrofitting in place of on/off controllers with no specialist knowledge needed. Machine designers can also benefit from adding the improved control and stability provided by PID, which adds value for the end-user without adding significant cost to the build.
Add precision to your temperature control not cost
Stock no. Description. Supply voltage
701-2763 PID Controller 1/16DIN 2xRelay 100 to 240 Vac
701-2766 PID Controller 1/16DIN 2xRelay 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
701-2760 PID Controller 1/16DIN SSR, Relay 100 to 240 Vac
701-2779 PID Controller 1/16DIN SSR, Relay 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
701-2772 PID Controller 1/16DIN 2xSSR, Relay 100 to 240 Vac
701-2776 PID Controller 1/16DIN 3xRelay 100 to 240 Vac
701-2785 PID Controller 1/16DIN 3xRelay 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
701-2788 PID Controller 1/16DIN 2xRelay, Analogue 100 to 240 Vac
701-2782 PID Controller 1/16DIN 2xRelay, SSR 100 to 240 Vac
701-2791 PID Controller 1/16DIN 2xRelay, SSR 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
714-0041 PID Controller 1/8DIN 2xRelay 100 to 240 Vac
714-0045 PID Controller 1/8DIN 2xRelay 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
714-0051 PID Controller 1/8DIN 2xSSR, Relay 100 to 240 Vac
714-0054 PID Controller 1/8DIN SSR, Relay 100 to 240 Vac
714-0057 PID Controller 1/8DIN SSR, Relay 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
714-0060 PID Controller 1/8DIN 3xRelay 100 to 240 Vac
714-0063 PID Controller 1/8DIN 3xRelay 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
714-0067 PID Controller 1/8DIN 2xRelay 100 to 240 Vac
714-0076 PID Controller 1/8DIN 2xRelay, SSR 100 to 240 Vac
714-0079 PID Controller 1/8DIN 2xRelay, SSR 20 to 48 Vac 50/60 Hz or 22 to 65 Vdc
Suitable for many industries and applications including:Small laboratory and industrial ovensBag SealersSterilisers & autoclavesCleaning bathsSmall Packaging MachinesDryersFood and beverage processingPlastics extrusion
And many more …
Key product features• 4 button operation with fast, simple setup• Dual 4 digit 10 mm & 8 mm easy to read LED displays,
plus 3 output status LEDs• Function button: Profiler Control (Run, Hold, Stop, Reset)
or Auto / Manual control (user defined)• 48 x 48 mm front panel with IP66 protection• Alarms: Process High, Process Low, Band and Deviation.• Compact - only 70 mm panel depth• Advanced 2 x 16 segment set point programmer
Inputs:• Thermocouple J, K, B, C, D, L, N, R, S, T, and RTD 3 Wire PT100• DC Linear 0 to 2 0mA, 4 to 20 mA, 0 to 50 mV, 10 to 50 mV,
0 to 5 V, 1 to 5 V, 0 to 10 V, 2 to 10 V.Outputs:• Control & Alarm Relays Contacts SPST 2 Amp resistive at 120/240V AC,
>200,000 operations• SSRDriverOutputsDrivecapability>10VDCin500Ωminimum,
non-isolated• DC Linear Outputs: 0 to 20 mA, 4 to 20 mA into 500 max, 0 to 10 V,
2 to 10 V, 0 to 5 V into 500 min.
www.rsgreece.com www.rsincyprus.com www.rsinlibya.com www.rsmalta.com
We offer 680 of ABB's energy efficient automation products, straight from our shelves.
With over 65,000 products, the RS Catalogue can assist your needs when there is no internet access.
www.rsgreece.com www.rsincyprus.com www.rsinlibya.com www.rsmalta.com
But there is so much more Online for when you do have internet access:
RS Online gives you instant access to more than 500,000 products. In addition to our large product range online, you can:
• Find what you need easily and faster with our powerful online product search
• Find all the latest products and technologies online first
• Check technical data sheets, stock and the latest prices before placing your order
• Benefit from special online discounts and offers and much more
ABB AutomAtion SolutionS2011