Popular attachments - Hyundai forklift in Vietnam

HYUNDAI FORKLIFT – ATTACHMENTS LINE-UP

HỆ THỐNG CÀNG KẸP THÔNG DỤNG

1Contact: Mr. Dzung – 0986.59.1986 – Sales Team Leader 1

Email: [email protected] - www.xenanghyundai.net

2

The types and shapes of objects

for logistics have increasingly

been diversified.

The most important condition is

the choice of proper attachment

for enhancing working

efficiency to the largest extent

under given working conditions

and within restricted time.

The diversified attachments

of the forklift trucks of

Hyundai will provide you

with vigor at the logistics

fields of yours.

Hyundai Forklift Attachments optimized for products with unique shape and type !



Notes for selecting the attachments

Select the attachments suitable for cargo to transfer.

Please note that operation of the attachments may be restricted dependent upon the nature of devices (e.g., visibility,

maintenance & service, and reduction of allowable load capacity).

The optimal forklift truck and the attachments suitable for the truck are the core

factors for achieving the maximum workability.

Popular attachments

Drum clamp

Paper roll clamp

Rotating fork

Carton clamp

Fork clamp

Side shift

Fork positioner

Pallet InverterLoad push

Drum picker

Hinged bucket

Hinged fork

Load stabilizer

Bale clamp



BALE CLAMP

Functions The arms of various sizes are attached, and

clamp cargo on both sides. It is allowed to

mount rubber pads on the arms for

protecting the surface of cargo.

Application Handling raw cotton, wool and pulp and

appropriate for unloading containers, for

example, at harbor

Type Synchronize, independent, shift type



CARTON CLAMP

Functions The wide arms clamp cargo on the sides

and transport the cargo

Application Handling cargo vulnerable to impact or

pressure such as boxed cargo, electronic

products (fridge, water heater) and

confectionery.

Type Synchronize, independent



DRUM CLAMP

Functions The arms shaped drums operate on both

sides. The clamp is capable of handling

one, two or four drums simultaneously

dependent upon application

Application Handling cargos of drums or similar

cylindrical containers (e.g., petrochemical

products, paints, inks, adhesives)

Type Rotating



DRUM PICKER

Functions Standing drums are clamped by the teeth of

the picker shaped eagle’s claws, and then

transported, or loaded/unloaded.

The picker is connected by a pin, and easy

of mounting and removing. You can use the

forklift for its own purpose after removing.

Application Handling cargos of drums or similar

cylindrical containers (e.g., petrochemical

products, paints, inks, adhesives)

Type One or two drums, shift type



FORK POSITIONER

Functions Allowed the operators to move the forks

quickly (to the left / right) and accurately to

fit different pallet sizes without leaving

their seats.

Application One of the most popular attachments.

Suitable for factory has got different pallet

sizes.

Type Standard type, shift type



SIDE SHIFT

Functions The fork carriage can be moved to the left /

the right while the gap between two forks is

immutable.

Application One of the most popular attachments.

Particularly useful for when operating in

tight environments, and for positioning

loads on racking without having to move

the truck itself.




PAPER ROLL CLAMP

Functions Clamping and rotating round shaped

cargoes for transportation, unloading and

loading

Application Loading and unloading of cargo of roll type

at paper mill, printing house, newspaper

company, packaging factory

Type

360% rotating type (both-side opening type

and single-side opening type), and 180%

static type



HINGED FORK

Functions The fork is dumped up and down for

transporting and loading cargos of

cylindrical shape.

Application Transportation and loading of small lumber,

pipe and brick. (open-air yard of lumber,

sawmill, brick factory)




HINGED BUCKET

Functions A bucket is added to the hinged fork, and

forklift can operate like a small loader. The

bucket is connected by a pin, and easy of

mounting and removing. You can use the

forklift truck for its own purpose after

removing the bucket.

Application Transportation of granular cargos such as

chemical fertilizer, sand, feeds, coal and

grain, and unloading the cargo (chemicals

factory, open-air yard of sand, feeds factory

or grain unloading yard).


13

FORK CLAMP

Functions The attachment is mounted on forklift truck

for clamping work. The device is capable

for clamping various products by adjusting

the gap between the forks.

Application Handling steel cargo, textile products and

long cargo

TypeSynchronize, independent, and rotating type

(2 and 4 fork clamp types)



ROTATING FORK

Functions The attachment rotates 360 degrees: A steel

box (chip box) is rotated to pour cargo.

Also, pallet work is allowed as done by

common forklift truck.

Application Unloading and transportation of fluid

(liquid) cargo at waste processing company,

feed mill, food factory and foundry.




RAM

Functions The Ram is a solid bar mounted at the front

or forklift. This is used to handle coiled iron

sheets, band steel, wire or carpet with their

center holes. This can be easily detached

for usual pallet work.

Application Steel factory, Textile factory




PALLET INVERTER LOAD PUSH

Functions The attachment push and load cargo with

the pushing plate after removing pallet from

cargo truck or container. The forks are

mounted on the sides of the device, and

wrap the cargo to prevent deformation of

cargo

Application Releasing cargo in bags or boxes from

palettes stacked in multiple layers.

Appropriate for workplace recovering high-

price process palettes, and logistics of

petrochemical products.

TypeRotating type, shift type, push type,

composite clamping type

17

COMPANY INTRODUCTION• Nhat Lo Phat 168 Co., Ltd was set up in 2001 with the main business in trading,

supplying and maintaining all kinds of lift trucks.

• Together with the development of the Vietnamese Industry, we has been developing continuously. Offices, stores, branches and maintaining workshops have been expanded. At this moment, the Company is dealing with more than 100 lifting products with many different models and types, which are suitable with the demand of customers. All of the products are imported directly from developed industry countries such as Taiwan, China, Korea, Japan, etc. Those products help companies and factories to have more suitable choices for the most convenience in moving and storing goods.

• Though the time of operating in the market is not quite long, the achievement of Nhat Lo Phat 168 Co., Ltd is marked with the incessant efforts. The company’s name is well-known in the market with the lift truck logo.

• From 2010, we are the exclusive distributor of Hyundai forklift in Vietnam and we have been supplying all kinds of Hyundai forklifts to plenty of customers.



19

For more details, please contact:

Mr. Phạm Trung Dũng0986.59.1986 [email protected]

www.xenanghyundai.nethttp://xenanghanghyundai.blogspot.com/

Thank you for your attention !

mailto:[email protected]

http://www.xenanghyundai.net/

http://xenanghanghyundai.blogspot.com/

http://xenanghanghyundai.blogspot.com/

Business

Popular attachments - Hyundai forklift in Vietnam