Presentation on :

1.Melt Flow Index Tester

2. Izod Impact Tester

Contact us : http://www.tensiletestingmachineutm.com

SHAMBHAVI LAB INSTRUMENTS

1.MELT FLOW INDEX TESTER

• This instrument measures the rate of extrusion of Molten resins through a die of specified length and diameter under prescribed conditions of temperature, load, piston position.

Specifications of Melt Flow Index Tester Instrument with following accessories will be suppliedDigital stop watch, Temp. Controller ( PID ), Piston, Orifice remove,Barrel Cleaner, Orifice Cleaner,Scoop, combined weight of  2.16 Kgs.. and 5.0 Kgs.1. Max. Temp.  Ambient to 300°C2. Resolution : 0.10°C, Accuracy : + 0.20°CTimer 0-99.9 min.

2. Izod Impact TesterCharpy Impact Testers AS PER ASTM D 256

. " Facility is provided for Computer Interface.“The resistance to breakage by flexural shock of plastics and Electrical insulating materials as indicated by the energy extracted from standardized pendulum type hammers mounted on standardized machines in breaking standard specimens with pendulum swing.  The energy absorbed per unit of specimen width is reported in joules.

IMAGES OF IZOD IMPACT TESTER

SPECIFICATION -OPTIONAL  FULLY DIGITAL DISPLAY ( LCD ) OF ANGLE AND ENERGY IN JOULES1. DIMENSION FEEDING FACILITY TO CALCULATE JOULES / CM2 OR JOULES / M  RANGE CHANGE BY SELECTOR SWITCH2. TORQUE WRENCH  INTERCHANGEABILITY OF IMPACT HAMMERS ARE VERY EASY.3. CHARPY HAMMERS  MAX. AVAILABLE ENERGY - 21.68 JOULES4. NOTCH CUTTER ( MANUAL )  RANGES - 0-2.71 J   0-5.42 J              0-10.84 J  0-21.68 J5. NOTCH CUTTER ( MOTORISED )

THANK YOU !

Contact us : http://www.tensiletestingmachineutm.com