Know The Specifics Of CNC Cutting Machine

CNC tube cutter can cut tubes distortion-freely in any kind of hardness when it is combined with computer and cutting table together.

CNC cutter is a useful tools for metalworking job, it can cut thick steel and stainless. For CNC plasma cutter kit, clients always prefer to choose their own plasma cutter kits, but use their plasma source along.

With necessary control program, CNC cutting machine can cut pipe steel, too. After a long time work with handle plasma cutter, client usually chooses this economical ways to upgrade their metal cutting tools.

How To Find The Right CNC Plasma Cutter Kit?

· Moving system: It needs to be the square rails, it will be better than round rails

· Electrical system: Choose the cutter kits with better electrical system including the wire, relay as they will protect the cutting from plasma interruption

· Control system: It is preferred to choose a stable system and it can adjust the cutting speed (line cutting speed, corner cutting speed) and can read all kinds of design file. The control system will have a beautiful screen but the preference is all about the stability and universality.

· The Shape Of Laser Beam: The shape of laser beam is a cone, so the cutting shape should be a taper. With the kerf of 0.4mm thickness plate, it is much thinner than 3mm thickness plate. The thicker plate is, the lower cutting accuracy will be and the bigger kerf will be.

· Width: When the fiber laser cutting accuracy will get better, especially the kerf width will be thinner and thinner. At this situation, the min laser spot can reach 0.01mm. This is one of the factors that influences on fiber laser cutting accuracy, too.

· Machine Body Precision: If the accuracy of fiber CNC cutting machine is uneven or other reason also can make fiber laser cutting quality not good.

· Cutting Material: Even though the material is the same kind of material, if their elements are different, the cutting accuracy is different. To cut different materials the cutting accuracy is different even with the same one fiber laser machine same one operator.

CNC tube cutting machine can cut carbon steel easily and suitable for cutting pipes with diameter from 80 to 400 mm. CNC plasma cutting machine guns occupied equipment daily use of the torch using a large part of the loss. There are a lot of influence factors to make sure one fiber laser CNC Plasma cutting machine’s cutting quality.

A fiber laser CNC cutting machine checks whether it is cutting accuracy is sharp or not. You need to make sure that the laser cutting accuracy and each part of fiber laser Plasma cutting machine is very important.

CNC cutting machine can cut variety kinds of material including all the metal plates. CNC plasma cutting machines is best for the convenience and the maintenance of fiber laser cutting machine can also influence on fiber laser cutting accuracy.

So when operator using fiber laser cutting machines, they need adjust the laser beam, the movement way on working table. This machine is highly efficient and the cutting speed is fast.

If you have any requirement or need any other information

related to cnc cutting machine then please

visit on our website. http://www.arcbro.com/