How To install Fabric Designer Wallcoverings

• The majority of people doesn’t know how to install fabric wallcoverings, so they have to pay installation charges to the installer. We are here to solve this problem, therefore we are disclosing how to install fabric wallcoverings.

Required Equipments• Wallcovering paste and primer• Tape measure• Roller cover• Pan liner• Paint brush• Paint roller and pan• Pencil and notepad• Utility knife• A bucket• Bolt of backed fabric• Fabric scissors• Smoothing tool• Damp rag• Sanding block

Step #1

• First, take a measuring tape to determine the width and height of the wall for the wallcovering. Make sure that the measurements should be accurate to install the wall covering perfectly. You may also add extra 4 to 5 inches more in measurements to prevent problem while cutting the wallcovering according to the measurements.

Step #2

• Now, fix the defected areas in the walls, fill the holes of screws, nails, etc. Use smoothing tool to comb the bumps to get rid off and let the filling material dry completely. Make sure that the surface should be smooth while filling the holes etc.

Step #3

• When the fillings get dry, then use the damp rag to wipe the lightly sand residue. After the wiping process, take a paint roller, dip the roller in the wallcovering primer and apply a coat to the wall wisely and let it dry for three hours approximately.

Step #4

• Now, the cutting process of the wallcovering start. Roll out the wallcovering on a flat long surface. Use a pencil to mark the width and height on the wallcovering according to the taken measurements of the wall. Let extra 4 to 5 inches space to prevent unknown mistake happened while measuring the wall.

Step #5

• After the measurements, now get ready to apply the fabric wall covering on the wall. Take a bucket and add wallcovering paste in it, then dip a paintbrush in the bucket and start applying the paste on the wall from the top down. Spread the paste properly all over the wall. After applying the paste, you can now attach the fabric wallcovering to the wall by using smoothing tool and simple paint roller to press the fabric against the glue and remove the air bubbles. In the end use the utility knife to remove the extra inches of wallcovering from the corners or edges.

THANK YOU

PPT Created By : Muraspec (Wallcoverings UK)