28
Syntek Global XFT FUEL TREATMENT PRESENTED BY: Lawi Sultan Njeremani

Fuel Savings for Industrial & Commercial users

Embed Size (px)

Citation preview

Page 1: Fuel Savings for Industrial & Commercial users

Syntek Global

XFT FUEL TREATMENTPRESENTED BY:

Lawi Sultan Njeremani

Page 2: Fuel Savings for Industrial & Commercial users

Syntek Global

Page 3: Fuel Savings for Industrial & Commercial users

Syntek Global

#34 Eric Schmidt, & #50 Chris JohnsonThanks to Terry Thomson

Page 4: Fuel Savings for Industrial & Commercial users

Syntek Global

Page 5: Fuel Savings for Industrial & Commercial users

Syntek Global

Page 6: Fuel Savings for Industrial & Commercial users

Syntek Global

Page 7: Fuel Savings for Industrial & Commercial users

Syntek Global

Fuel Savings

Engine Life

Emission Savings

Page 8: Fuel Savings for Industrial & Commercial users

Syntek Global• Product History (18 years)• What is a Catalyst, Burn Rate Modifier

Organo-metallic chemistry.• How does it work / high concentration Reduces the temperature at which combustion occurs (in a diesel engine from

1200°F to 800°F)

• Increases the burn of the available BTU’s of fuels. 3 The combined result is a much more complete burn generating more power, and/or requiring less fuel to generate the same power per pound of fuel consumed

• Compare to other products• Additional products added for better results.

Page 9: Fuel Savings for Industrial & Commercial users

Syntek GlobalCorrosion Inhibitors--Rust Removal

Page 10: Fuel Savings for Industrial & Commercial users

Syntek GlobalDetergents--Clean and Maintain

Page 11: Fuel Savings for Industrial & Commercial users

Syntek Global

Clean Fuel spray burn

Page 12: Fuel Savings for Industrial & Commercial users

Syntek Global

Stabilizer--Prolongs life of fuel

Page 13: Fuel Savings for Industrial & Commercial users

Syntek GlobalLubricant--Pumps and Injectors

Page 14: Fuel Savings for Industrial & Commercial users

Syntek GlobalDemulsifies--Separate water from fuel

Page 15: Fuel Savings for Industrial & Commercial users

Polymerization RetardantsReduce Solid Formation

Syntek Global

Page 16: Fuel Savings for Industrial & Commercial users

Syntek Global• What makes our product different? • Concentration of product and other ingredients.

• $60.00 VS. ¼ OZ. $3.50

Page 17: Fuel Savings for Industrial & Commercial users

Syntek GlobalOther leading retail brands:

– “Red Line” Fuel Catalyst • 12 oz. treats 20 gallons of fuel Retail cost: $6.99

– “Techron Concentrate Plus Fuel System Cleaner• 12 oz. treats 12 gallons of fuel Retail cost: $7.99

– zMax Micro-Lubricant Fuel Formula• 12 oz. treats 20 gallons of fuel Retail cost: $19.99

– Sta-Bil Fuel Stabilizer• 8 oz. treats 20 gallons of fuel Retail cost: $5.99

– Diesel Power Anti-Gel Fuel Treatment• 12 oz. treats 35 gallons of fuel Retail cost: $5.99

– Gum out Gasoline Treatment• 12 oz. treats 21 gallons of fuel Retail cost: $2.99

– HEET water Demulsifier• 12 oz treats 20 gallons of fuel Retail cost: $1.99

– 104 Octane Booster• 16 oz. treats 25 gallons of fuel Retail cost: $7.99

– Total • 96 fluid ounces to treat approx. 20 gallons of fuel - Retail cost: $59.92

Page 18: Fuel Savings for Industrial & Commercial users

Syntek GlobalLower maintenance costs

15,000 HOURS ON THESE PISTONS—EXTENDED TO 25.000 HOURS

Page 19: Fuel Savings for Industrial & Commercial users

Environmental

Does this look familiar?

Page 20: Fuel Savings for Industrial & Commercial users

Syntek Global• Smoke reduction

Page 21: Fuel Savings for Industrial & Commercial users

Syntek Global• No Alcohol • EPA Registered• Use Lower Octane Gas With No Pings.• No Warranty Issues• Lower Maintenance Costs• More Horsepower• 15ppm Fuel—older trucks• Anti-Gel• Winter blend fuels

Page 22: Fuel Savings for Industrial & Commercial users

Syntek Global• What is Carbon Mass Balance Tests?

• Carbon measured in the engine exhaust gas is related to the carbon content of the fuel consumed.

• Carbon balance has been found to be a more precise fuel consumption test method than the alternative volumetric-gravimetric methods.

Page 23: Fuel Savings for Industrial & Commercial users

Syntek Global• The Carbon Mass Balance test is a fundamental part

of the Australian Standards. AS2077-1982. Further, the Carbon Mass Balance test procedure has proven to be an intricate part of the United States EPA, FTP and HFET Fuel Economy Tests. Also, Ford Motor Company characterized the carbon balance test procedure as being “at least as accurate as any other method of volumetric-gravimetric testing.” (SAE Paper No. 750002BruceSimpson, Ford Motor Company) Finally, the Carbon Mass Balance procedure is incorporated in the Federal Register Voluntary Fuel Economy Labeling Program, Volume 39. HFET- Highway fuel economy test FTP-Federal test procedures

Page 24: Fuel Savings for Industrial & Commercial users

Syntek Global

Base line –run product–rerun test

Page 25: Fuel Savings for Industrial & Commercial users
Page 26: Fuel Savings for Industrial & Commercial users

Syntek GlobalIndustrial and Transportation Customers

• Testimonials and reports are available on request• Reports include: D975, Emissions, Pama, Stationary Generator,

Testimonies, Mass Carbon Balance summary, and Q and A’s. • Pilot testing to establish efficiency in your machines can be

conducted.• Testing: same route, same driver, same loads, and same fuels. (all

fuels are not the same)– Base line

Page 27: Fuel Savings for Industrial & Commercial users

Syntek GlobalBenefits Review

• Stabilizer--Prolongs life of fuel• Lubricant--Pumps and Injectors• Detergents--Clean and Maintain• Polymerization Retardants--Solid Formation• Corrosion Inhibitors--Rust Removal• Demulsifies--Separate water from fuel• Reduces Carbon Buildup• Catalyst• Test Results

Page 28: Fuel Savings for Industrial & Commercial users

CONTACT:[email protected]

[email protected]

FOR TRADE ENQUIRIES, FUEL SAVINGS CONSULTATION,

DISTRIBUTORSHIP, WHOLESALE & RETAIL

OPPORTUNITIES OF XFT