Upload
truccsa-siglo-xxi-sl
View
192
Download
13
Tags:
Embed Size (px)
DESCRIPTION
Company catalogue of products
Citation preview
Truccsa has been created as a internationalisation project and its main objective is to
break into new markets, with the philosophy of using its corporate image to establish the brand.
The objective is to bring the products closer to the customers, offering a combination of
the best service with the greatest competitiveness, creating manufacturing centres and distribution
points.
Truccsa is made up of a collection of personnel, some who are pioneers in research and
development and others who are professionals from within the market and who have recognised
experience in manufacture.
Truccsa offering a wide range of products offering significant advantages. Our products
provide you with efficient solutions for use in construction.
PHILOSOPHY
1) VERTICAL OVERLAYS FOR DECORATING FACADES
5 T.R. RASPADO One coat rendering mortar, with a scraped texture.
6 T.G. GRANITO One coat rendering mortar, with a granite texture.
10 T.I.R. IMPRESO One coat rendering mortar, imprinted rustic texture.
11 T.I.M. IMPRESO One coat rendering mortar, imprinted stone texture.
12 T.I.T. TIXOTROPICO One coat rendering mortar, themed textures.
14 T.L.B. LAVADO One coat rendering mortar, trowelled texture, white.
14 T.E.G. ENFOSCADO One coat rendering mortar, trowelled texture, grey.
15 T.B. BRUÑIDO One coat rendering mortar, smooth texture.
15 T.S. STUCCO One coat rendering mortar, marbled. Venetian Stucco.
2) TECHNICAL MORTARS
17 T.M.H. HIDRÓFUGO Water-resistant mortar, for hydraulic repairs.
17 T.H. MICRO HORMIGÓN Quick setting industrial anchor mortar.
18 T.RE. RESTAURA Mortar filler for architectural restoration.
18 T.P.CEPRONT Instant set cement filler.
18 T.H. SEAL IMP. Water proofing cement mortar.
3) CEMENT BASED TILE ADHESIVES
20 T.ECOL-CE Adhesive for baked clay tiles, indoor use.
20 T.ECOL-C1T Adhesive for earthenware tiles, indoor use.
20 T.ECOL-C1E Adhesive for porcelain tiles, indoor use.
20 T.ECOL-C1TE Non-slip long open setting time adhesive.
21 T.ECOL-C2TS1.PLUS Non-slip long open setting adhesive for swimming pools.
4) ACRYLIC BASED TILE ADHESIVES IN PASTA
22 TR´COL-D1E Adhesive for earthenware and porcelain tiles, indoor use.
22 TR´COL-DTE Adhesive for earthenware and porcelain tiles, outdoor use.
5) CEMENT BASED SEAMLESS PAVING
23 T.PV. PULIDO Industrial surface layer on fresh concrete.
23 T.PV. BETON Industrial mortar 0,393-1,590 in* approx. (*1-1,5 cm), for cured concrete.
24 T.PV. AUTONIVEL Self-levelling mortar, for floors.
24 T.PV. GRIETAFLEX Repair mortar.
25 T.PV. STAMP Surface layer, imprinted paving, for fresh concrete.
26 T.PV. COLOR Cement mortar, imprinted on cured concrete.
30 T.PV. SPRAY Cement mortar, for spraying, 0,118-0,157 in* approx. (*3-4 mm).
32 T.PV. TERRA Seamless terrazzo. Combination fine particle mortar, for a polished finish.
PRODUCT LIST
2
5
1
1. VERTICAL OVERLAYS FOR DECORATING FACADES
Our vertical overlays offer a wide range of products with different textures and colours, all ready
to be directly applied to the surface of the facade (blocks, brick, concrete, etc.). They are
decorative and different colours can be combined to create unique designs.
These one coat products are used in place of the more traditional ended, (cement filler, plaster
and paint) to create a coating with an average thickness of between 0,314 and 0,590 in* approx.
(*8 and 15 mm).They offer improved resistance to damage caused by ultraviolet radiation, they
are waterproof and breathable, resistant to erosion caused by weather and the bending and
compression resistances are controlled by the regulations for vertical coverings, in accordance
with the construction materials used.
They are one coat rendering mortars. As the name suggests, each rendering mortar is a single
product that is applied in one or more coats.
T.R. RASPADO, one coat rendering mortar with a scraped texture
One coat mortar scraped in colours for bush-hammered textures (available in 55,115 lb* sacksapprox.). *25 kg.
T.R.Raspado is a one coat rendering mortar made from white cement of the type BLI-52.5 N,
fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and
fibres, which together create a mixture of a specified strength. The mortar is mixed with water
to achieve the required characteristics of consistency, setting time, workability, texture, colour,
waterproofing and water vapour permeability.
The product is applied directly to the facade (prefabricated cement blocks, ceramic bricks and
concrete, after the primer has been applied).
Scraped texture, in terracota Scraped texture, in blue
The substrate surface should be uniform and not contain any holes, be levelled
and plumbed and free from dust, grease, oil, silicone, release agents, paint and
other repellents.
VERTICAL OVERLAYSFOR DECORATING FACADES
Onecoat T.R. Raspado, scrapedtexture.
Onecoat Tr.I.R. Imprinted mold, imprinted texture Onecoat T.L.B. Lavado. Onecoat T.I.I tixotropico, themed texture.
6
1
PRODUCTS TE BE USED with TR RASPADO one coatrendering mortars:
T.R. BASE, base mortar of preventive repair and preparation base, for
aged supports or with an uncertain planimetry, with manufacturing fault,
cracks and hollows, (available in 66,138 lb* sacks approx.).*25 kg.
T.C.P. BOND COAT, primer for capillarity-exempted, hydraulic and quartz
base, (available in 66,138 lb* packages approx.).*25 kg.
T.PVC. JUNQUILLOS, PVC bead for establishing the quarterings of the
facade designs and work joints, (bars of 78,740 and 98,425 in* approx.)*2
and 2,5 m.
T.PVC. ESQUINEROS, PVC corner units to make the corners with ‘pinto vivo’,
vertically and straight, (bars of 78,740 and 98,425 in* approx.)*2 and 2,5 m.
TOOLS, for manual or machine application*.
* Machine application; mixer with pressure projection, feeder and gun,
as well as special nozzle and support to connect accessories to the air
hose and create the spraying range of the product.
T.G. GRANITO, one coat rendering mortar with a granite texture
One coat mortar in colours, for marble crushing spread in colourful granite textures,(available in 55,115 lb* sacks approx.).*25 kg.
T.G. Granito is a one coat rendering mortar made from white cement of the type BLI-52.5 N, fine
particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and
fibres, which together create a mixture of a specified strength. The mortar is mixed with water
to achieve the required characteristics of consistency, setting time, workability, texture, colour,
waterproofing and water vapour permeability.
T.G. Granito - granite texture
VERTICAL OVERLAYSFOR DECORATING FACADES
Examples of the use of T.R. Raspado – scrapped texture.
7
1
• COLOUR OPTIONS FOR SINGLE-LAYER OVERLAYS: T.R.RASPADO AND T.R.GRANITO
A wide range of colours is available providing you with many design possibilities.
GEC
GEC
GEC
A
A
A
VERTICAL OVERLAYSFOR DECORATING FACADES
Examples of the use of T.R. Granito – granite texture.
Grey
Pink
Leather
It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete),
after the primer has been applied.
The application surface should be uniform and not contain any holes, be levelled and plumbed
and free from dust, grease, oil, silicone, release agents, paint and other repellents.
T.R. Granito is presented for its application in a paste format and later spread of crushed marble, in
colours that overall will set up the granite texture.
GECA
8
1
GECA
GEC
GEC
GEC
GEC
Salmon A
A
A
Orange A
VERTICAL OVERLAYSFOR DECORATING FACADES
Terra-cotta
Brown
Brown
Violet
9
1
GECA
GEC
GEC
GECA
A
A
VERTICAL OVERLAYSFOR DECORATING FACADES
Red
Yellow
Green
Ivory
Wood RedPink Ivory
Grey Pearl Yellow LemonRolled SingingGrey with White
T.I.R. IMPRESO, one coat rendering mortar, imprinted rustic texture
One coat mortar in pastel colours, for impression through a rustic texture roller,(available in 55,115 lb* sacks approx.).*25 kg.
T.I.R. Impreso is a one coat rendering mortar made from white cement of the type BLI-52.5 N,
fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and
fibres, which together create a mixture of a specified strength. The mortar is mixed with water
to achieve the required characteristics of consistency, setting time, workability, texture, colour,
waterproofing and water vapour permeability.
It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete),
after the primer has been applied.
PRODUCTS TO BE USED with T.I.R. IMPRESO one coat rendering mortars:
T.G.GELCOLOR, natural pigment filled in water-spreading, for fading effect in decoration of rustic texture
distressings, for impressed and thisotropic coating, (available in 11,023 lb* packages approx.). *5 kg.
10
1
The substrate should be uniform and not contain any holes, be levelled and
plumbed and free from dust, grease, oil, silicone, release agents, paint and other
repellents.
T.I.R. Impreso is presented for its application in a paste format in different models
and the subsequent impression by rubber roller, with a previous application of
a demolder and its subsequent distressing with the T.G. Gelcolor product.
VERTICAL OVERLAYSFOR DECORATING FACADES
Texture realised with roller. Texture realised with textured roller to be cut afterwards
Examples of the use of T.I.R. Impreso, imprinted texture
T.E.G.ENFOSCADO, base mortar of preventive repair and preparation base,
for aged supports or with an uncertain planimetry, with manufacturing fault,
cracks and hollows, (available in 55,115 lb* sacks approx.).*25 kg.
T.C.P.BONDCOAT, primer for capillarity-exempted acrylic and quartz base, (available in 55,115
lb* packages approx.).*25 kg.
11
T.D.L.DESMOLDEANTE LÍQUIDO, liquid demolder for imprinting of coatings and pavings,
impressed or patterned, (available in 55,115 lb* sacks approx.). *25 l.
RUBBER ROLLER, in different models and textures, for imprinting patterns on the imprinted one
coat rendering mortar.
TOOLS, for manual or machine application.
ROLLERS AND STAMPS to give texture to the imprinted single-layer KRETE´ROD.
T.I.M. IMPRESO, one coat rendering mortar with imprinted stone texture
One coat mortar in ivory colour, for impression through casts, with rustic textures in theshape of stone and brick of several models, (available in 55,115 lb* sacks approx.).*25 kg.
T.I.M. Impreso is a one coat rendering mortar made from white cement of the type BLI-52.5 N,
fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and
fibres, which together create a mixture of a specified strength. The mortar is mixed with water
to achieve the required characteristics of consistency, setting time, workability, texture, colour,
waterproofing and water vapour permeability.
It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete,
after the primer has been applied).
The substrate should be uniform and not contain any holes, be levelled and plumbed and free
from dust, grease, oil, silicone, release agents, paint and other repellents.
1
T.I.M. Impreso is presented in dust for
its application in a paste format and
later impression by different models of
rubber roller, with a previous application
of a demolder and its subsequent
distressing with the T.G.Gelcolor
product.
Examples of the use of Scraping, T.I.M. Impreso texture.
VERTICAL OVERLAYSFOR DECORATING FACADES
1
12
PRODUCTS TO BE USED with T.I.M.IMPRESO one coat renderign mortars:
T.G.GELCOLOR, natural pigment filled in water-
spreading, for fading effect in decoration of rustic texture
distressings, for impressed and thixotropics coating,
(available in 11,023 lb* packages approx.).*5 kg.
T.E.G.ENFOSCADO, base mortar of preventive
repair and preparation base, for aged substrates
or with an uncertain planimetry, with manufacturing
fault, cracks and hollows, (available in 55,115 lb*
sacks approx.).*25 kg.
T.C.P.BOND COAT, primer for capillarity-exempted
hydraulic and quartz base, (available in 55,115 lb*
packages approx.). *25 kg.
T.D.L.DESMOLDEANTE LÍQUIDO, liquid release for
the impression of coatings and pavings, impressed or
patterned, (available in 6,604 gal* packages approx.).
*25 l.
T.I.T. TIXOTROPICO, one coat rendering mortar with themed freehand texture
One coat mortar in ivory colour, for thematic textures, freehand architectural designs andother techniques followed by different artists, (available in 55,115 lb* sacks approx.).*25 kg.
T.I.T. Tixotropic is a one coat rendering mortar made from white cement of the type BLI-52.5 N,
fine particles of calcium carbonate aggregates, lightweight volcanic aggregates; silica sands and
fibres, which together create a mixture of a specified strength. The mortar is mixed with water
to achieve the required characteristics of consistency, setting time, workability, texture, colour,
waterproofing and water vapour permeability.
Stamps of different designs to give
texture to the imprinted single-layer T.I.M.
IMPRESO overlay.
VERTICAL OVERLAYSFOR DECORATING FACADES
Examples of the use of T.I.T. Tixotropico, themed texture
RUBBER STAMPS, in different models
and textures, for imprinting patterns on
the imprintedone coat rendering mortar.
TOOLS, for manual or machine application.
PRODUCTS TO BE USED with T.I.T. TIXOTROPICO one coat rendering mortars:
T.G..GELCOLOR, natural filled in water-spreading pigments for fading and distressed effects in
rustic texture decoration, for impressed and thixotropics coating, (available in 11,023 lb* packages
approx.).*5 kg.
PRECONFORMADO, for the design of relief structures using expanded polystyrene.
MALLAZO, steel 0,157x0,157 in* approx.(*4x4 mm)mesh, used as the resistance structure to
which the design is fitted.
TOOLS, for manual or machine application.
13
T.I.T. Tixotropico is presented in dust for its application in a paste format, allowing
a 0,787-1,968 in* approx.(*2-5 cm) thickness, so that it can be textured in a period
of time between 4 and 8 hours, forming thematic drawings and textures through
the use of sharp steel tools, cutters, scrapers and other kinds of complementary
techniques provided by artist depending on the required task.
1 VERTICAL OVERLAYSFOR DECORATING FACADES
It is applied directly to the facade (prefabricated cement blocks, ceramic bricks and concrete and
polystyrene pieces, following composition of the design).
Before application the design of the surface should be prepared using expanded polystyrene
pieces placed in a 0,157x0,157 in* approx.(*4x4 mm) steel mesh.
Thematic, architectural and other scenographic works
T.L.B LAVADO, one coat renderign mortar, trowelled texture, white
This type of rendering mortar is more cost effective and has a lower thickness
requirement, between 0,314 and 0,393 in* approx. (*8 and 10 mm), which means
it can be applied more rapidly, thus providing additional savings in terms of labour
costs.
It is intended for seamless, smooth coverings, particularly in the construction of
Mediterranean style ground floors, patios, party walls, etc. Substituting traditional
plaster work without needing to be painted later.
Monocoat mortar of great performance, white colour, for floated textures and plasters,(available in 55,115 lb* sacks approx.).*25 kg.
This is an rendering mortar made from fine particles combined with white cement, exactly the
same as for the previous products.
However, there are differences between the two products because of their textures, the different
application methods and the different end uses of the products.
1
14
T.E.G. ENFOSCADO, one coat rendering mortar, trowelled texture, greyMonocoat mortar of great performance, grey colour, for floated textures andplasters, for paint finishes, (available in 55,115 lb* sacks approx.).*25 kg.
This is an rendering mortar made from fine particles
combined with white cement, exactly the same as for the
previous products.
However, there are differences between the two products
because of their textures, the different application
methods and the different end uses of the products.
It is intended for seamless, smooth overlays that will
subsequently be painted.
VERTICAL OVERLAYSFOR DECORATING FACADES
Washed texture, trowelled
15
1
T.B. BRUÑIDO, one coat rendering mortar, smooth texture
One coat plain texture, for thin finishes, burnishing and preparing of Venetian stucco infacade, (available in 55,115 lb* sacks approx.).*25 kg.
This is a rendering mortar made from fine particles combined with white cement, exactly the
same as for the previous products.
However, there are differences between the two products because of their textures, the different
application methods and the different end uses of the products.
T.S. STUCCO, marbled rendering mortar
Coloured powder product, for the application of fillings, for marbling textures, (availablein 22,046 lb* packages approx.).*10 kg.
Marbled rendering mortars are different in their composition. They are based on very fine
mineralised silicates and wax agents. Water is used to combine this mixture with white cement
of the type BLI-52.5 N, and re-dispersible polymers, modified using additives to control consistency
and setting. Tr Stucco is applied in very fine coats of 0,196 in* (*0.5 mm), leaving each coat to
dry and with the minimum of 3 coats.
support
It is designed to create seamless rendering mortars in the form of very fine
plaster which can then be painted. It is also used in the preparation of
substrates that are to be marbled and substrates where other special effects
are going to be created with a very fine plaster texture.
For veined finishes, the final coat is finished off with a steel trowel or trowel
with an stainless trowel, applying the product in sectors, trimming the edges
with the trowel and continually rubbing.
VERTICAL OVERLAYSFOR DECORATING FACADES
Development of the application:
T.R. Bruñido T. S. Stucco
1
16
PRODUCT AGE IMMERSIÓN TIME CAPILLARITY COEFFICIENT(days) (minutes) (kg/m2 *min.,0,5)
Waterproofing results for capillary water absorption coefficients in accordance with(UNE-EN 1015-18:2003)
VERTICAL OVERLAY RANGE
PRODUCT AGE FLEXIÓN STRENGTH FLEXIÓN COMPRESSIVE(days) (N/mm2) (N/mm2)
• TECNICAL RESULTS
VERTICAL OVERLAYSFOR DECORATING FACADES
Bending and Compression resistance results in accordance with (UNE-EN 1015-11:2000).
VERTICAL OVERLAY RANGE
T.R. Raspado 28 90 0,2
T.R. Granito 28 90 0,32
T.I.R. Impreso 28 90 0,2
T.L.B. Lavado 28 90 0,3
Tr Lav. fondo 28 90 0,12
T.L.E. Enfoscado 28 90 0,14
T.R. Truccal 28 90 0,30
T.I.T. Tixotropico 28 90 0,20
T.R. Raspado 28 4,4 9,6
T.R. Granito 28 1,4 3,1
T.I.R. Impreso 28 2,0 3,9
T.L.B. Lavado 28 2,9 7,8
Tr Lav. fondo 28 2,6 4,1
T.L.E. Enfoscado 28 2,7 7,1
T.R. Truccal 28 1,7 5,0
T.I.T. Tixotropic 28 2,0 3,9
17
2. TECHNICAL MORTARS
Our Technical Mortar range of products is especially designed to provide solutions to problems
that can arise in building, construction, industry, public works and hydraulics.
Technical rendering mortars are made up of a granulometric structure of quartz, fine particles
of quartz, silica and mineralised silicates. Water is used to combine this mixture with cement with
high ash content. This speeds up the setting process and results in a product which provides the
greatest resistance in the shortest time.
T.M.H. HIDRÓFUGO, water-resistant mortar, for hydraulic repairs
Quick-setting waterproof mortar, for hydraulic reparations on wet substrates,for capillary filtration of concretes and mortars in general, for buildingsbelow water table, (available in 55,115 lb* sacks approx.).*25 kg.
T.H. MICRO HORMIGÓN, quick setting industrial anchor mortar
T.H. Micro hormigón, is a maximum strength mortar that is designed to fix industrial machinery
which needs to be rapidly fixed in place, in a timescale of 4-6 hours.
It is also the ideal mortar for repairing concrete structures with serious problems, covering these
structures after girding the pillars.
2
T.M.H. HIdrófugo, is a high resistance mortar which is very waterproof and
is designed to be used for repairs to reservoirs and hydraulic reservoirs made
from concrete, tunnels, lift shafts, water tanks, swimming pools and any other
location where water is a permanent feature.
Quick-setting mortar of high resistance for machinery anchorage, silo structures andsimilar ones where a quick implementation with a high safety level is required, (availablein 55,115 lb* sacks approx.).*25 kg.
TECHNICAL MORTARS
2
18
T.RE., mortar filler for architectural restoration
T.P.CEPRONT, Rapid setting mortar. Sealant for water filtration in concrete andcement-based substrates.
T.P.Cepront is a cement filler made of quartz and quick setting cement. It is prepared in the hand
(hands must be protected by the use of rubber gloves) by creating a ball. At this point it starts
to heat up and set and so should be immediately applied to the crack or leak, applying pressure
to the product until it fully sets. This will take a few minutes.
T.H. SEAL IMP, waterproofing cement mortar
Quick-setting mortar with malleable features, for the fixing and monumental restorationof statues, cornices, mouldings, colums, capitals and any cultural-related work, (availablein 55,115 lb* sacks approx.).*25 kg.
T.RE, is a maximum strength mortar designed specifically for the architectural restoration of
cornices, mouldings, shields and other shapes.
T.RE, is used as a filler and applied in the desired quantity or layers, up
to the maximum application. Its great advantage comes from the fact that
it is quick setting, which allows for continuous work, there is no shrinkage,
and it is easily mouldable.
Instant-setting cement for leakage blockings, (available in 55,115 lb* sacks approx.).*25 kg.
Before the product is applied the crack should
be prepared. This is done by widening the
crack to form the shape of the tail of a kite,
trying to create a reinforcing anchor for the
filler.
Cement hydraulic paint, for the application of fluid grout with plasticconsistency, for permanent waterproofing of lift pits, wells, deposits,basements, buried bridge floors, structural foundations, poolsupports, heavy clay bodies, dam and reservoir fixings, etc. It actsto pressure and counter pressure, (available in 55,115 lb* sacksapprox.).*25 kg.
TECHNICAL MORTARS
19
T.H. Seal Imp, is a cement mortar made up of calcium crystals, mineralised silicates and different
waterproofing agents that give the product its waterproofing characteristics.
Water is used to combined this mixture with white cement of the type BLI 52.5 N and re-dispersible
polymers.
The combination creates a product which when applied to surfaces forms part of those surfaces,
anchored by capillary absorption and chemical action.
It is prepared as a grout and can be applied using a paint brush or hairbrush in continuous coats
(minimum of three).
The product is designed to be a waterproof treatment and is therefore idea for basements, car
parks, lift shafts, bridges, hydraulic construction works, etc.
For waterproofing with stagnant water, the product is combined with Estire Tr, a waterproof
polymer compound that creates a plastic membrane which then acts as a reinforcement in
permanent contact with the stagnant water. It is ideal for tanks, reservoirs, etc.
2 TECHNICAL MORTARS
Waterproofing for tunnels Waterproofing for the refrigeration industry
Treatments and waterproofing of buried buildings
20
3
T. ECOL-CE, adhesive for baked clay tiles, indoor use
Cement base adhesive mortar for ceramic placement, special for clay pastes,
interior application, (available in 44,092 lb* sacks approx.).*20 kg.
T.ECOL-C1T, adhesive for earthenware tiles, indoor use
Cement base adhesive mortar for ceramic placement, earthenware and porcelanic,
on cement and concrete substrates and plasterboard panels, is imited sliding,
(available in 44,092 lb* sacks approx.).*20 kg.
T.ECOL-C1E, adhesive for porcelain t i les, indoor use
Cement base adhesive mortar for ceramic placement, earthenware and porcelanic,
on cement and concrete substrates and plasterboard panels, is long-lived,
(available in 44,092 lb* sacks approx.).*20 kg.
T.ECOL-C1TE, Non-slip (T), long open setting time (E) adhesive.
Cement base adhesive mortar for ceramic placement, earthenware and porcelanic,
on cement and concrete substrates and plasterboard panels, is limited sliding
and long-lived, (available in 44,092 lb* sacks approx.).*20 kg.
3. CEMENT BASED TILE ADHESIVES
Tile adhesives can be either cement or acrylic based. Each of these basic types comes in a
variety of forms depending on the surface that the tiles are going to be fixed to and the quality
of the tiles that are going to be fixed.
Cement based adhesives are made up of white cement of the type BLI-52,5 N , calcium carbonate
aggregates, quartz and mineralised silicates, with a maximum particle size of 0,196in (0.5mm).
The mortar is mixed with water to achieve the required characteristics such as control consistency,
adhesive power, resistance, the potential for sliding and the drying time.
The two types differ because of the different proportions and quantities of the products and
additives used in each. These determine the characteristics and quality of each.
CEMENT BASEDTILE ADHESIVES
21
3
T.ECOL-C2TS1. PLUS, long open setting time adhesive for swimming pools
Cement base adhesive mortar for ceramic placement, earthenware and
porcelanic, on cement and concrete substrates and prefabricated panels,
special for outside placement, is limited sliding and long-lived, (available in
55,115 lb* sacks approx.).*25kg.
CEMENT BASEDTILE ADHESIVES
4. ACRYLIC BASED TILE ADHESIVES IN PASTA
Acrylic based tile adhesives are made from a base of quartz and silica with a very fine particle size
of 0,007 in approx.(0.2 mm), bound together using an acrylic resin and modified using additives to
control the characteristics of the product: consistency; dryness; slipping and adhesion to surfaces.
They are particularly recommended when fitting ceramic tiles onto non-porous surfaces, where
a very uniform application is needed and where it is important to avoid placing too much adhesive
onto concrete or polystyrene panels, cardboard panels,plaster, etc. It appears in the shape of
pasta.
22
PRODUCTS TO BE USED with TILE ADHESIVES:
T.JUNTACOLOR, bedding mortar in colours for decoration in ceramic
placement, for 4mm gap joints,(available in 11,023 - 33,069 and 55,115 lb*
packages approx.).*5, 15 and 25 kg.
T.JUNTAFIN, bedding mortar in colours for the sealed one in ceramic
placement, for thin joints of traditional placement,(available in 11,023 - 33,069
and 55,115 lb* packages approx.).*5, 15 and 25 kg.
T.R. COL-D1E, adhesive for earthenware and porcelain tiles,indoor use
Acrylic base adhesive mortar for ceramic placement, for earthenware and
porcelanic placement, on capillarity-exempted substrates, indoor use and
long-lived, (available in 44,092 lb* sacks approx.).*20 kg.
T.R. COL-D1TE, adhesive for earthenware and porcelain tiles,outdoor use
Acrylic base adhesive mortar for ceramic placement, for earthenware
and porcelanic placement, on capillarity-exempted supports, outside
placement, is l imited sliding and long-lived, (available in 44,092 lb*
sacks approx.).*20 kg.
4ACRYLIC BASED TILE ADHESIVES
23
5. CEMENT BASED SEAMLESS PAVING
Seamless paving is a new concept in paving and takes advantage of the concreting of surfaces
to create an attractive finish. Once the concrete is laid, the surface is treated using a roller to
add texture and colour for a decorative finish.
Another paste format product for the application on tanned concrete which will be subsequently
polished, textured or spread over designs previously placed on the first application base.
Seamless imprinted paving products are maximum strength products which recreate
traditional rustic designs and imitate different natural textures.
T.PV. PULIDO, industrial surface layer on freshconcrete
Powder component for the surface course over freshconcrete, for its subsequent polishing, in colours,grey, red, green and others on demand, (available in55,115 lb* sacks approx.).*25 kg.
T.PV. Pulido, is a compound consisting of quartz,
silica and colour, combined with white cement of the type
BLI-52.5 N and modified using wetting agents and other
additives to control penetration into the fresh concrete. It is
applied by sprinkling it onto the surface while mechanically
rubbing it in a circular motion, thus allowing the product to
continuously penetrate the surface while the hardening
process takes place. This ensures an even colour finish.
T.PV. BETON, industrial Mortar 0,393-0,590 in* approx.(*1-1.5cm), for cured concrete
High resistance mortar for application on controlled-consistency paste,
for application over cured concrete in 0,393-0,590 in* approx.(*1-1.5
cm) thickness, (available in 55,115 lb* sacks approx.).*25 kg.
5 CEMENT BASEDSEAMLESS PAVING
5
They are made up of silica aggregates, grey cement CEM
II/A-LL 42,5 R and regulating additives that control the
reduction of water used in the mixing and the elasticity of
the mortar so that when it is poured, be it manually or
mechanically,
it self-levels with the help of a spreader.
T.PV. AUTONIVEL, self-levelling mortar, for floors.
Self-levelling mortar for uniform top layers in pavings, as preparation
for the placement of ceramic pavings and other synthetics, (available
in 55,115 lb* sacks approx.).*25 kg.
Self-levelling mortars are designed for the preparation of floors where
surfaces need to be completely level so that ceramic paving can be laid at
a later date.
T.PV. GRIETAFLEX, repair mortar
Base mortar of preventive repair and preparation base, for aged substrates or with an
uncertain planimetry, with manufacturing fault, cracks and hollows, (available in 55,115lb* sacks approx.).*25 kg.
24
This is a mortar consisting of fine particles of quartz and silica. It is combined with white or gray
cement of the type BLI-52 N or grey CEM II/A-LL 42,5 R, modified using additives to control
consistency, setting and strength.
It is available in green, red, black, and grey and the method of application is the same as for Tr
Pulver.
Repair mortar is designed for repairing surfaces, for preventing future
problems with the finishes for vertical overlays and seamless paving.
It is composed of silica aggregates and water is used to combine this mixture
with grey concrete CEM II/A-LL 42,5 R, modified using additives to control
consistency, setting time and strength.
CEMENT BASEDSEAMLESS PAVING
25
T. PV. STAMP, surface layer, imprinted paving, for fresh concrete
Impressed pavings, powder component available in colours, for the surface course over
fresh concrete, for the impression or pattern through rubber casts, (available in 55,115lb* sacks approx.).*25 kg.
T.PV. Stamp, is made of quartz and silica, mixed with white cement BLI-52.5
N and additives to control the consistency of the product in damp conditions.
It is designed to form a layer covering the surface of freshly laid concrete.
It comes in the form of a powder and is applied by scattered it over the surface
that you want to treat.
A powder releasing agent, T.D.P. Desmoldeante, is also applied to prevent direct contact between
the rubber stamp and the concrete surface. Stamps come in a variety of designs and when
applied to the concrete they create textures. The overall result is that you can create different
colours and textures.
5 CEMENT BASEDSEAMLESS PAVING
Examples of the use of T.PV. Stamp
5
26
T.PV. COLOR,cement mortar, imprinted on cured concrete
Impressed pavings, high resistance mortar for the application oncontrolled-consistency paste, for application over cured concrete in0,393-0,590 in approx. (1-1.5 cm) thickness, prepared for the impression
or pattern through rubber casts, (available in 55,115 lb* sacks approx).* 25 kg.
T.PV. Color, paving is made up of quartz and silica, mixed with white cement BLI-52.5 N and
additives that form a perfectly packed curve. Water is used to combine this mixture to provide
the right characteristics for the task, which in this case is to create a seamless paving 0,393-
0,590 in* approx.(*1-1,5 cm) thick.
T.PV. Color is created to provide you with decorative paving in places where applying a greater
thickness is not possible.Texture is added by imprinting using rubber stamps, as for the previous
product T.PV. Stamp. Powder release agent and liquid demoulding agent, Desmol T.D.L and
Desmoldeante T.D.P. Desmoldeante, can be used as desired.
The product is applied to cured concrete once the surface has been prepared using repair mortar,
which should be applied if holes, chips or cracks exist.
CEMENT BASEDSEAMLESS PAVING
Examples of the use of T.PV. Stamp
27
5
• STAMPS OR STENCILS FOR IMPRINTED PAVING
The wide range of stamps and continuous imprinting mats available mean that you can createmany different textures and add a touch of design to your paving.
CEMENT BASEDSEAMLESS PAVING
M(A) M(D)M(C)M(B) M(E)
M(F) M(I)M(H)M(G) M(J)
M(R) M(V)M(T)M(S) M(Y)
M(M) M(P)M(O)M(N) M(Q)
P(A) P(D)P(C)P(B) P(E)
5
28
• COLOURS AVAILABLE FOR IMPRINTED PAVING
CEMENT BASEDSEAMLESS PAVING
Grey Luxury. D.green
Grey slate. D.dark toasting Grey slate. D. red
Grey Luxury. D.red Grey Luxury. D.brown 26
Grey Luxury. D.yellow
Sinai Sand. D. yellow Sinai Sand. D.dark toasting Sinai Sand. D. red
Sinai Sand. D. green Sinai Sand. D. black 10 Sinai Sand. D. brown 26
29
5 CEMENT BASEDSEAMLESS PAVING
Guadarrama. D.black 10 Guadarrama. D.red
Guadarrama. D. dark tan White D. green and yellow White, orange and black 10
Guadarrama. D.green
White D.yellow White D. brown 20 Brown D. orange
Brown D.black 10 White D.brown 20 and yellow Yellow albero D.green
• COLOURS AVAILABLE FOR IMPRINTED PAVING
30
T.PV. SPRAY, cement mortar, for spraying, 0,118-1,157 (3-4 mm)
Fluid application mortar through spraying gun, for solutions where it isrequired a paving over cured concrete on 0,118-0,157 in* approx. (*3-4mm) thickness, high resistance and periods of time inferior to 6-8 h, forthe traffic it is applied continuously and over quarterings with Stencil,(available in 55,115 lb* sacks approx.).*25 kg.
T.PV. Spray, is a spray-on paving for use when an average thickness of 0,118-0,157 in* approx.
(*3-4 mm) is required. It is designed to be used in emergencies,where the surface must be
passable within 8 hours.
T.PV. Spray, is a cement mortar made of white cement of type BLI-52.5 N, aggregates with very
fine particles, which is modified to control resistance while the product is applied as a paste, in
the form of a grout, as well as consistency and final strength.
T.PV. Spray, is applied to cured concrete surfaces using a spray machine which consists of a
hopper, a spray gun with different nozzles to control the flow of the material and an air system
to create the spraying range.
It is applied to a surface once any necessary repairs have been carried out.Firstly, the cement
mortar is laid. Once this is dry the stencil, which creates the design, is laid on top of the cement
and different colours can be applied to create the finish that you want to achieve. Finally, once
cleaned and brushed to remove any remaining substances, the surface is treated with resin.
5CEMENT BASEDSEAMLESS PAVING
• TEXTURAS T.PV. SPRAY TEXTURES CREATED BY STENCIL PATTERNED SPRAY CEMENT
31
S-1 S-2 S-3 S-4
S-5 S-6 S-7 S-8
S-9 S-11
S-13
S-12S-10
S-16S-15S-14
S-17 S-23S-22S-21
S-20S-19S-18
5 CEMENT BASEDSEAMLESS PAVING
• STENCIL, STENCILS TO BE USED WITH T.PV. SPRAY TO CREATE DESIGNS
T.PV. TERRA, seamless terrazzo. Combination fine particlemortar, for a polished finish
Mortar in colours, composed by dry in different colours and grades,
between 0,118-0,236 in* approx.(*3-6 mm), applied in paste on cured
concrete, on a 0,590-0,787 in* approx.(*1.5-2 cm) thickness, so that
once it is set, it can be polished dryly and work as a continuous terrazzo,
(available in 55,115 lb* sacks approx.).*25 kg.
T.PV. Terra, is applied to cured concrete in a layer of 0,590-
0,787 in* (*1,5-2 cm). This is allowed to set and harden before
being polished, treating the whole of the surface until the
different colour aggregates can be seen. Together with the
base colour of the cement this creates a seamless terrazzo
style paving to which a resin is applied in order to bring out
the colours and protect the surface.
P-2 P-5P-4P-3
P-6 P-9P-8P-7
P-1
5
T.PV. Terra, is a mortar based paving made of white cement of the type BLI-52.5 N, silicate
aggregates, larger marble chips in a range of colours and additives to control consistency, setting
and resistance. Water is used to combine this mixture.
32
PRODUCTS TO BE USED with seamless paving:
FIBRES FOR MORTARS: Steel fibres used to reinforce concrete. These fibres are obtained by
wire drawing.
The shape adopted by DIXTREL, FIBERCON and TREFIL allows an excellent holding quality to
concrete, which improves the reinforced concrete’s mechanic characteristics, thus avoiding
fissures to occur.
CEMENT BASEDSEAMLESS PAVING
These three types of fibres are directly added to the mortar as it s being mixed just as any other
ordinary additive.
Both with DIXTREL, FIBERCON and TREFIL, the minimum recommended dose is 25/m3 of
mortar. (Amount of fibre/lb=3470+- 10 Units).
5
• DIXTREL 1,968 in* approx (*50 mm)
Its main feature is that the shape at both ends has a cylindrical section.
MINIMUM TRACTION STRENGTH = 1,250 N/mm2
• FIBERCON 1,968 in* approx (*50 mm)
Its main feature is the wavy shape all along its filament.
MINIMUM TRACTION STRENGTH = 900 N/mm2
• TREFIL 1,968 in* approx (*50 mm)
Its main feature is the wavy shape all along its filament.
MINIMUM TRACTION STRENGTH = 1.250 N/mm2
• FIBRES-AR
This is an inorganic glass fibre used to reinforce concrete and mortars,
which provides a high degree of protection, helping prevent fissures and
reducing porosity.
Traditional glass fibres have only a short-term load resistance due to
the aggressive alkaline characteristics of concrete; with FIBRES-AR,
designed with a special formula in which includes zirconium oxide, it is
not affected by limy environments, and is stable to concrete alkali.
Its traction strength is really high, as it has a filament density per weight
unit far above its competitors, and also a great elasticity, enabling it to
easily absorb the concrete retractions.
• POLIPRO-FIB
Multifilament polypropylene fibres specially designed to be mixed with
mortars, they render them resistant and prevent fissures.
33
T.PV. GRIETAFLEX, base mortar of preventive repair and preparation base, for aged supports
or with an uncertain planimetry, with manufacturing fault, cracks and hollows, (available in 55,115
lb* sacks approx.).*25 kg.
T.D.L.DESMOLDEANTE LÍQUIDO, liquid demolder for imprinting of coatings and pavings,
impressed or patterned, (available in 6,604 gal* packages approx.).*25 l.
CEMENT BASEDSEAMLESS PAVING
34
T.D.P. DESMOLDEANTE EN POLVO, powder release for imprinting on
surfaces, to prevent mould sticking to the damp surface, (available in
17,636 lb* packages approx.).*8 kg.
T.R.RESINA, surface guard and colour-highlight styrene acrylic -base
fixer which helps the surface resistance of pavings, (available in 6,604
gal* packages approx.).*25 l.
T.R. RESIWAT, surface guard and colour-highlight acrylic - base fixer
which helps the surface resistance of pavings, (available in 6,604 gal*
packages approx.).*25 l.
T.R.RESIPUL, surface guard and colour-highlight polyurethane-base
fixer which helps the surface resistance of pavings, (available in 6,604
gal* packages approx.).*25 l.
T.R.RESIPOX, surface guard and colour-highlight epoxidic - base fixer
which helps the surface resistance of pavings, (available in 6,604 gal*
packages approx.).*25 l.
Tools, for manual or machine application
* Levelling tools, steel trowels with extendable handles, kock-it,
change of flow direction mechanism, joints markers, edgers and
other complementary tools.
* Mechanical polisher. This consists of grinding plates with eccentric
movement which expose a new layer and leave you with a polished
finish.
5
• TOOLS FOR MANUAL OR MACHINE APPLICATION OF PRODUCTS TO BE USEDWITH SEAMLESS PAVING
Roquer Magnesium trowel Edger Trowel Rake
Stamping machine Bag Marker gun Marker gun Hopper
CEMENT BASEDSEAMLESS PAVING
35
• QUALITY CERTIFICATES. WORK CONTROL
5
Tolva Concrete regulator Polisher Measuring jugs Compressor 450 l/min
Diamond disc Setter 120 Narrow blade 120
Trimmer blade 4/B
Trimmer
Trimmer blade 6/B Trimmer plate 75 Trimmer plate 60/3 arms
90-120 blade
Trimmer plate 60/4 arms
CEMENT BASEDSEAMLESS PAVING
36
6. CHEMICAL PRODUCTS
Different technical solutions for:
Concrete plants, monuments restorers, petrochemical industries, waterproofing and building
specialists.
6
T.R. EPOXI, epoxy primer
Primer for capillarity-exempted epoxidic base, (available in 5,283 gal*packages approx.).*20 l.
This is a resin to be used on non-porous surfaces. it is applied to the surface
to be treated and while it is still fresh the rendering mortar is applied to create
a chemical adhesion.
T.R. RESINA, acrylic primer, permanent tack
Primer for capillarity-exempted with permanent tack, (available in 44,092 lb* packagesapprox.).*20 kg.
This is permanent tack resin in the form of an adhesive that remains tacky over the long term,
creating a primer on which rendering mortars can be anchored.
T.C.P.BOND COAT, quartz base primer
Primer for capillarity-exempted acrylic and quartz base, (available in 66,138 lb* packagesapprox.). *30 kg.
This is a resin with added silicates of particle size 0,196-0,314 in* approx.(*0.5-0.8 mm). it is applied
to surfaces to create a rough surface that acts as a primer and creates an anchor for rendering mortars.
HORMIPLAST T.R, concrete plasticizer
This is a product that can be added to concrete, in the proportion of 0,002 ga*l (*0.008 l) for
each lb of cement used in the mixing, it improves fluidity without the need to add more water,
(avaible in 6,604- 13,208- 52,834 and 267,17 gal* packages approx.).*25, 50, 200 y 1000 l.
HORMIFLUIT T.R,concrete fluidizer
This product is added to concrete in the proportion of 0,001 gal* (*0.007l) per lb of cement, it
reduces the amount of water needed in mixing. this in turn increases the strength of the concrete
with an average strength increase of 1/4 gal/Yr3 approx. for each litre saved in mixing, (avaible
in 6,604- 13,208- 52,834 and 267,17 gal* packages approx.).*25, 50, 200 y 1000 l.
CHEMICAL PRODUCTS
6
37
FRIO STOP T.R, concrete anti-freeze for low temperatures
This anti-freeze admixture is added to concrete being laid in low temperatures. It allows setting
to take place as normal, (avaible in 6,604 gal* packages approx.).*25 l.
ACTICOLOR T.R, concrete descaler
This concrete descaler removes concrete residues from any surface, (avaible in 6,604 gal*
packages approx.).*25 l.
LIMCOLOR T.R,concrete cleaner
Concrete cleaner this cleaning product removes the white marks caused by calcium hydroxide
in the cement, (avaible in 6,604 gal* packages approx.).*25 l.
CRISTA T.R, water-proofing liquid for concrete and exposed
brickwork
Cement hydraulic paint, for the application of fluid grout with plastic
consistency, for permanent waterproofing of lift pits, wells, deposits,
basements, buried bridge floors, structural foundations, pool supports,
heavy clay bodies, dam and reservoir fixings, etc, (available in 6,604
gal* packages approx.).* 25 l.
This is siloxane product used to waterproof concrete, exposed brickwork and other plastered
mortar surfaces that present problems in terms of dampness caused by the rain. It works by
capillary absorption repels water when applied it forms insoluble crystals that fill out the pores,
so creating a waterproof layer.
CHEMICAL PRODUCTS
FABRICA
30353