CellMAG-WNon-chamber telemetry measuring and logging set

Non-Chamber Telemetry Measuring and Logging Set CellMAG–W is the solution dedicated for water supply network, based on a battery powered electromagneticflow meter and the CellBOX-W device. This set consists of two main parts:the measuring sensors mounted directly on a pipeline and the telemetry pillar containing measuring transducer and logging/transmission subsystem.

Flow, pressure and temperature measurement No dedicated meter chamber required Flexibility: could be mounted virtually anywhere on the pipeline No mains power required GSM (SMS/GPRS/EDGE) data transmission Compact and modular design SCADA systems compatible

We offer preconfigured SIM cards in the APN cellbox.pland provide managementservice as well.We offer accessto the measurement datavia the Internet (any standard WWW browser).We ensure safety at everystage of transmission: IPSectunnels with 3DES encryptionfor connections with customers servers and SSL protocolfor WWW access.

Sample SCADA visualizations athttps://telemetria.net.plLogin: demo01 pass: demo01(login and password from“demo01” up to “demo09”)

All elements of CellMAG-W Set are battery powered, so the set could be assembled virtually at any section of the pipeline, and even buried directly in the ground. Mounting of CellMAG-W Set does not require any particular preparation and can be accomplished even during an extemporary maintenancework.Installation of CellMAG-W Set enables to reduce costs of operating water supply networks, since it does not require any underground meter chambers nor manholes to be constructed.Compact design of telemetry pillar does not require much space on the surface of the earth and furthermore ensures good GSM signal quality.In its basic configuration the CellMAG-W Set includes only a battery powered electromagnetic flow meter and the CellBOX-W device, enabling the measurementand registration of flow and ambient temperature. Using of an additional sensor enables the measurement of pressure in the pipeline.Thanks to its modular design, the basic functionality of CellMAG-W Set could be expanded both on additional measuring sensors and on supplemental functionalityof logging/transmission subsystem. For example, replacing the CellBOX-W device with the CellBOX-H GPRS enables additional measuring and logging of up to 3 analog parameters and GSM data transmission: GPRS or EDGE.Built-in battery enables maintenance-free, a few years operation of the CellMAG-W Set, depending on the frequency of both logging and transmission.Logger memory is capable of storing 20,000 up to 160,000 measurement results.Collected data could be transmitted to the supervisory system using the GSM SMS, GPRS or EDGE (option) in accordance with the programmed interval. In addition, the occurrence of an alarm event may be transmitted to the supervisory system immediately.Biatel SA offers SIM cards from 3 largest GSM operators, providing almost 100% coverage of the country.Non-Chamber Telemetry Measuring and Logging Set CellMAG-W is fully compatible with the SCADA-type systems.

Battery powered electromagnetic flow meter – selected individually High measurement reliability High dynamics and long-term

stability of measurement Bi-directional measurement IP68 enclosure rating, could be

buried directly into the ground Battery operation time up to 5+

years

CellBOX-WInputs and outputs 1 passive analog input, current or

voltage – option 4 configurable digital inputs:

counter or bi-state 1 output – electronic key GSM Module – dual-band

(900/1800MHz) – option

Logger functionality Cyclic or linear data logging Simultaneous logging of all

measurement data GSM transmission: SMS, optional

GPRS or EDGE Memory capacity: 20000 up to

160000 measurement results Programmable logging interval from

1 second up

Features LCD Display for any measured

parameter indication Configurable description and units

of displayed parameters CSQ measurement, supporting

optimal antenna settings Reset to the factory settings option Full software and device

identification Build-in bootloader enabling remote

software update

Modes of operation SMS (cyclic or event data

transmission) Optional GPRS or Edge

Schedules Weekly or monthly schedule of tasks

performing Programmable task starting time Interval from 1 second up Separate schedules for logging,

transmission, analog or digital measurements

Flow count Alarm checkup

AlarmsAlarm start/end sends SMS at up to 4 defined phone numbers

Temperature Ranges Storage temperature: -40÷80 [°C] Operating temperature: -25÷70 [°C]

Power supply Internal build-in battery pack

providing operation time up to 5 years

(logging every 15 minutes/1 SMS per day)

External power source as alternative