Catalogue vitalbase export

TELECARE HEALTHCARE

1ST AUTOMATIC FALL DETECTOR ON EUROPEAN MARKET

In Europe, the falls generate 600.000 emergency room admissions in hospital.Falls and fractures in people aged 65 and over account for over 4 million bed days each year inEngland alone.In the UK, 15% of admissions to Hospitals are due to falls…

Application areas :

Sheltered Housing, Retirement village, Healthcare Establishments, Healthcare facilities within the local area.In coming 10 Years, 130% Care requirement increase over Europe105 000 fall death occurred during care.50% fall occurred in healthcare establishment during 1 year period.Enable your patients and residents to enjoy a performance secure device capable to protect them in their rooms or during their walking movements !

The European population over 75 years old is around 35 million people and 99% of them wish to stay at homeFurther 85 years old, the fall risk is over 50% over a calendar year!In France, 12 000 deaths/year are due to a fall…In Europe, fall-related injuries are reported to be the fifth most common cause of death in the elderly population and themost likely cause of accidental death.

As people grow older they are increasingly at risk of falling and injuring themselves, often leading to unconsciousness or awkward positions in which they are unable to activate a manual trigger themselves. To lie undiscovered for hours after a fall often leads to more serious complications and increased risk of premature death.

Our solution is today deployed in a large scale throughout Europe by all Telecare operators.Compatible with main Telecare home units.

Thanks to the addition of the automatic fall detection to the traditional button of voluntary call, VitalBase brings a real advanced technology into the Telecare market.

Why the Fall Detector VitalBase?

HealthCare Market

More than

are already protected by

200 000 users

After six years of advanced research, studies and trials Telecom Design launched an VitalBase fall detector into theTelecare market. Its unique and innovative algorithm eliminates the majority of false alarms, providing continuous protection from unexpected falls.Most elderly people do not really consider they might fall, especially when choosing a new TeleCare or TeleHealthinstallation, so the VitalBase Fall Detector watch will give them continuous protection from the unexpected dangerous fall. The VITALBASE fall detector is indeed vital to the health and well-being of the elderly telecare user.

TeleCare Market

Copyright © 2014 by Telecom Design Release 3.0 Nov14

THE MOST DEPLOYED SOLUTION IN EUROPE

A RELIABLE AND REASSURING SOLUTION

THE MOST INNOVATE AUTOMATIC CALL

200 000 EN 5034-2 1stusers

in EuropeEuropean standard

automatic falldetection

on the market

The fall detection concept

Description

How does it work?

STEP 1

STEP 2

VitalBaseFALL Detector

In case of heavy fall, an abnormal activity is detected / (Heavy/dangerous fall)At the end of the countdown, the alarm signal is triggered. (Immobility / Fall detected)The alert is sent to the transmitter …which immediately warns the call centre…..which also warns the emergency persons previously selected by the wearerAfter a fall, the wearer can cancel the alarm by making a large movement of the arm.


VitalBaseFALL is an automatic fall detector based on a microcontroller, a 3-axis accelerometer, a vibrator and a radio transmitter; allowing easily integration into an existing Telecare product range. Significantly low power consumption was also realised along with the high reliability of fall detection. In common with standard manual pendants or wrist fobs used to call for assistance - in the case of distress or illness - the VitalBaseFALL watch also has a manual button. The major problem with relying on a manual emergency call is that the user must be conscious and still able to press the alarm button; this is not always the case after a serious fall. The VitalBaseFALL answers this problem; it detects the fall and automatically calls for help. A radio signal is transmitted to the home care phone which in turn is connected (either by telephone, Internet or GSM etc.) to an emergency call response centre.

The design objectives are two-fold: detecting falls that lead to unconsciousness and to promote the continuous security of the user. Although a waist or neck pendant is an easy place to detect falls it is the least likely to provide protection at the critical moments of washing, dressing and night time wandering. So by locating the sensor on the wrist both the aesthetic and practical considerations are all resolved.

Following a fall, the fall detector algorithm takes between 10-20 seconds to determine the fall event the time taken by the algorithm depends on many variables including previous activity, fall hardness, height etc.

The unit will then vibrate for 20-30 seconds to alert the user that a fall event has been detected, if no activity (arm movement) is detected during this warning period a fall alarm will be generated and the red LED lights up to confirm the generation of the alarm.Therefore following a fall, a period of inactivity of 30-40 seconds is needed for an alarm to be generated.


More than

200 000 Users

Call Center

CasingWaterproof (IP67)Shocks resistant (IK6)Diameter : 37mmThickness: 18mmWeight : 35gHypo-allergenic plastic

RadioSocial alarm compatibilityclass 1 / class 2, Long distanceCompatible with AM, FM, 868 MHz, ISMTransmetter ASK, FSK, GSFK

BatteryReplaceable batteryRemovable back cover provides access to the batteryAuto Low Battery (ALB) reportingBattery Life : up to 2 yearsSupplied with lithium battery (CR2477)

Under Safety 24/7

Manual triggeringAt any time, the alarm can also be triggered by a simple pressure on the button.

Specifications

To run with optimal results, VitalBase has to be worn continuously at the wrist. Any other use many cause malfunctions and false alarms.

Fall

VitalBase was specially developed to be permanently worn on the wrist for maximum comfort of the wearer in everyday lifeVitalBase knows how to make discreet on the wearer while remaining watchful for his safety...The VitalBase technology analyses the movements during the everyday activity / (normal activity)

“The VitalBase is a continuous protection from the unexpected dangerous fall...”

Acce

lero

met

ric d

ata

Time (Approximately 35 seconds)

Normal activity Fall event Immobility

During the phase of immobility,if the wearer does notwant to placean alarm call,a large movementof the armwill cancel the alarm

Everyday lifeActivities

Automatic alarmAc

cele

rom

etric

dat

a

Time (approximately 35 seconds)

Normal activity Fall event Activity after Fall

During the phase of vibration,if the carrier resumes this

activity, or gets up,the alarm will not be sent.

Everyday lifeActivities

Automatic alarm candellation



Road MapSamples Q1 2015MASS PRODUCTION: SUMMER 2015

New Casing including:- New design with a real stigma break!

- Much thinner than existing VBC3 (from 18mm to 13mm)

- New bracelet

- New enclosure with new plastic fabric

New technical functionalities- Bluetooth Low Energy embedded dedicated to settings, configuration, change protocols, data upload for statistics, and more…..

- Integration of behavioral analysis with physical activity on body movement with different level (small, medium and high)

- Strengthen the reliability of the fall detection

- Provide continuity of service

The future...New VitalBase fall detector VBC4

Also availabletransceiver

features

Copyright © 2014 by Telecom Design

Transceiver Solutions

TD1208 / Radio Chip Module TransceiverTD Transceiver is equipped with high performances TD1208 radio chip Module.The combination of a powerful radio transceiver and a state-of-the-art ARM Cortex M3 baseband processor achieves extremely high performance while maintaining ultra-low active and standby current consumption.The TD1208 device offers an outstanding RF sensitivity of – 126 dBm while providing an exceptional output power of up to +14 dBm with unmatched TX efficiency.The LVTTL low- energy UART, the I2C bus, the multiple timers with pulse count input/PWM output capabilities, the 2 high-resolution/high-speed ADCs and single DAC, along with the numerous GPIOs can control any kind of external sensors or activators.Featuring an AES encryption engine and a DMA controller, the powerful 32-bit ARM Cortex-M3 baseband processor can implement highly complex and secure protocols in an efficient environmental and very low consumption way.

Release 3.0 Nov14

The New VitalBase Receiver : VBR2

Description The TD VitalBase Receiver VBR2 is a ISM (Industrial Scientific & Medical) 868Mhz Transceiver designed to connect different peripherals such as TD Fall Detector or TD Smoke sensor or others to a host terminal using standard simple protocols (RS232, RS485, UART, Dry Contacts).

FeaturesIn it standard configuration, the TD VitalBase Receiver VBR2 is configured to use the proprietary TD RF Protocol and a simple ASCII host protocol. Other custom protocols can be implemented on demand. Due to its small and compact enclosure, the TD VitalBase VBR2 can be installed as a desktop device or wall mounting device or integrated into walls, ceiling or bedheads.Thanks to its numerous standard connectors, it is easy to plug and install.New Compact plastic casing available in white color .Dimensions : 3.0’’ x 3.0’’ x 1.0’’ / 7,62 cm x 7,62 cm x 2,54 cm

5 position Internal PCB Terminal Block with spring Cage connection for Dry Contacts (C Form : CO/NO/NC)

Road Map - Samples end of 2014- Mass Production March 2015

RJ45 connector: - RS232- RS485- UART LVTTL (3.3V) - Dry Contacts (C Form : CO/NO/NC)- 8V to 24V DC power supply- 2 status leds

Mini USB connector: - virtual COM port (CDC ACM)- 5V DC Power supply

Integrated antenna with external SMA connector

TD- Smoke Sensor

Discrete and functional, smoke detector, Optical smoke detector operating according to the TYNDALL effect, equipped with photoelectric detection technology, it quickly detects the presence of smoke in the house.Certified NF EN 14604 (October 2012), this and NF DAAF and comply with the European directive 2002/95/EC.

Technical Characteristics• Certification : CE certification -14604, AFNOR certification VESTA -SIG 0333-CPD-292057• Operation : the smoke detector activates the built-in siren and flashing red LED from the detection of the first smoke

particles. It also transmits an alert via the integral radio transmitter. It resets automatically and the siren stops when no further particles are detected in the optical chamber.

• Sensor : photoelectronic.• Sensitivity : Complies with standard NF-EN14604.• Lack of battery indication : battery required to lock the device.• Power and autonomy : Alcalin 9V battery - battery life up to 2 years. .• Alarm : Built-in piezo siren.• Automatic self-test : Self testing of the sensor, electronics and battery voltage.• Operating temperature : 0° to 55° C• Loudness : > 85 dB(a) at 3 m and > 94.5 DB(a) at 1 m.• Low battery signaling : acoustic indicator of low battery with a sound beep every minutes for 30 days. • Functional check : red light flashing once per minute. Test button to ensure the proper functioning of the appliance

once a month or after each battery change (complete test room and alarm).• Feature: insect grid to avoid false triggering.• Relative humidity : 0 to 93% RH.• Dimensions : (Ø x H): 120 x 50 mm. • Product Weight: 185g.• Material: ABS. • Warranty: 2 years• Packaging: Individual White Box – Dimensions: 60x120x120mm - Weight: 220g – Master Carton 40 units (10kg’s).• Radio Alarm details:

- “Keep Alive” every 23 hours- Low Battery Alert - Smoke Detected- Test (button)- FaultBands: Social Alarm (869 Mhz) +14dBm max, Customer Protocol to be embedded.


Smoke alarm detector with radio alert

Functional Check An automatic radio alarm frame is sent when the motion sensor is activated by intrusion, or tampering detection

Sensor PIR

Sensitivity Maximum: 10M

Power and autonomy AA Alkalin battery (x2) - Battery Life : up to 2 years

Automatic self-test alarm Testing the sensor, the electronics and the battery voltage

Operating Temperature 0° to 70° C

Functional Control Red light signal once a minute Test button for installation purpose

Dimensions l/W/H 90 x 86 x 32 mm

Net weight 130 g (with batteries)

Material ABS

Installation Wall and ceiling install with swivel mounts

Warranty 2 years

Radio alarm types Intrusion alarm frame Tampering frame alarm hook Supervision alarm frame every 23 hours Low battery alarm frame

The motion sensor is paired to the Carephone or Home Units with embedded Telecom Design Generic Protocol or custom protocol.

Certification CE


Radio motion sensor

Your contact :

Nathalie [email protected]

T ELEC O MD E S I G N

Zone Actipolis II2 bis rue Nully de Harcourt33610 Canejan - FRANCE

Phone : +33 557 356 370Fax : 33 557356 371www.telecom-design.com


Business

Catalogue vitalbase export