Upload
shiyas-basheer
View
139
Download
1
Tags:
Embed Size (px)
DESCRIPTION
In this report the focuses on the overall frame and body design and how it performs under certain conditions. In order to do this the frame was first modelled on SolidWorks. This was done a number of times to get the frame correct. The module was broken down into a number of different areas to help design a suitable frame and body to adhere to the regulations of the formula student. Over the course of this report the following key areas were accomplished to design a suitable frame and body.
Citation preview
Frame DESIGN PROJECT
SHIYAS BASHEER
Objectives
Design a frame
Maintain and improve its strength
Design a suitable bodywork with good aerodynamic characteristics
Perform FEA analysis
Sustainability analysis
Frame Design
Frame Design
Cut List
Percy Rule
Helmet Clearance
Cockpit
The bulkhead
Triangulation Rule
FEA Analysis
Front roll hoop
Displacement – 14.3mm
FEA Analysis
Main Roll Hoop
Displacement –19.15mm
FEA Analysis
Side Impact
Displacement –20.5mm
FEA Analysis
Side Impact
Displacement –4.2mm
FEA Analysis
Torsional Rigidity
Displacement –1.97 mm
Body Work
Flow Simulation
Flow Trajectory
Sustainability
Conclusion
All the objectives were achieved
The frame is light
Still strong
Adheres to all rules
Bodywork
Improvements
Reduce the drag
Reduce the size of side wings
Rapid prototyping
Thank You