RSF-Equipment Catalog 2016 English

2016catalog

WORKSHOPPRODUCT

LINE

quality

installationcounseling

maintenance

design

RSF EQUIPMENT - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -

RSF Equipment is a company specializing in ma-chinery and equipment for workshops, with more than 20 years of experience in the business mar-ket.

We are specialists in vehicle lifts, tire changers and wheel balancers and in alignment. We also have a wide range of accessories and tools, everything you need for your workshop.

RSF Equipment, with its large stock of machinery and spare parts, has managed to be one of the most important companies dedicated to the equip-ment of workshops.

We also have extensive experience in the foreign market, adapting to the needs of our customers, we send our products to anywhere in the world.

INQUIRIES AND ORDERS By telephone:

+34 980 560 111 +34 980 560 856

By email: [email protected] By fax:

+34 980 049 487

• MOBILE: (0034) 629 822 496 • TEL: (0034) 980 560 111 • FAX: (0034) 980 049 487 • email: [email protected]

LIFTS 2 POST LIFTS 1-3 LIFTS 3-4 SCISSOR LIFTS 5-8

WHEEL ALIGNERS WHEEL ALIGNER 9-10

TIRE CHANGERS CAR TIRE CHANGERS 11-13 TRUCK TIRE CHANGERS 14

WHEEL BALANCERS CAR WHEEL BALANCERS 15 TRUCK WHEEL BALANCERS 16

A/C AND NITROGEN MACHINES A/C MACHINES 17 NITROGEN INFLATOR/GENERATOR 18

AIR COMPRESSORS PISTON AIR COMPRESSORS 19 SCREW AIR COMPRESSORS 20

ULTRASONIC CLEANERS ULTRASONIC CLEANERS 21

DIAGNOSIS DIAGNOSIS TOOL 22

WORKSHOP EQUIPMENT JACKS 23-24 MOTORCYCLE 25-26 SHOP PRESS 27 FOLDING ENGINE CRANES AND VULCANIZER 28 WORKBENCHES AND LUBRICATION EQUIPMENT 29 NEW PRODUCTS 2016 30 RUBBER PADS 31-32

BATTERY CHARGERS AND STARTERS BATTERY CHARGERS 33 BATTERY STATERS 33

PLASMA CUTTING AND WELDING PLASMA CUTTING 34 MIG-MAG WELDING 35 MMA WELDING 36 SPOT WELDING 37 TIG WELDING 38

mailto:[email protected]

www.rsf-maquinaria.com

- DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -

• MOBILE: (0034) 629 822 496 • TEL: (0034) 980 560 111 • FAX: (0034) 980 049 487 • email: [email protected] 0

RSF Equipmet reserves the right to modify the characteristics of the materials and prices of this catalog without notice. Prices without V.A.T. The images, text, trademarks, logos and general content of the catalog are protected by Spanish and international laws on intellectual property protection. any unauthorized reproduction is prohibited. The images shown in this catalog are merely descriptive and may suffer some variation from the final product supplied.

ALL TYPES OF LIFTS

SPECIALISTS IN ALIGNMENT

WHEEL BALACERS

TIRE CHANGERS


TWO POST LIFTS - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -

1 • MOBILE: (0034) 629 822 496 • TEL: (0034) 980 560 111 • FAX: (0034) 980 049 487 • email: [email protected]

HP-35 Electro-hydraulic 2 post lift synchronize using steel cables. Safety devices and manual single point lock release. Asymmetric arms with minimum height above ground of 95 mm. Track width 2.60 m and distance between columns 2.80 m .

•Capacity 3.500 Kg •Maximum lifting height 1,90 m •Manual lock release

HP-40A Electro-hydraulic 2 post lift synchronize using steel ca-bles. Safety devices and automatic lock release. Asymme-tric arms with minimum height above ground of 110 mm. Track width 2.60 m and distance between columns 2.80 m. •Capacity: 4.000 Kg •Maximum lifting height 1,90 m •Automatic lock release HP-40B Same features as HP-40A •Lower baseplate

HP-40C Same features as HP-40A •Equipped with overhead beam

“U” SUPPORT ARM NOT INCLUDED

TRUCK ADAPTER SET HP-35 H-55 MM

TRUCK ADAPTER SET HP-40 NOT INCLUDED

110 MM 70 MM

NOT INCLUDED ACCESSORIES


www.rsf-maquinaria.com - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


TRUCK ADAPTER SET HP-50 INCLUDED

LIFTS

HP-50 Electro-hydraulic 2 post lift with 3 stages symmetric arms. Track width 2.50 m and distance between columns 2.80 m. • Capacity: 5.000 Kg • Maximum lifting height 1,90 m • Automatic lock release • Specially designed for vans and light trucks thanks to its len-gth of arms, 4 m between points

HP-45A 4 post lift specially designed for alignment. Track width 2.63 m and length of platforms 4.80 m. Moreover, each lifting platform has a ramp to facilitate access of low vehicles. • Capacity: 5.000 Kg • Maximum lifting height 1,80 m • Automatic lock release

Secondary lift 2,5 T Slide rear plates

Turntables can be placed in different positions

AP-200 Electro-hydraulic 2 post parking lift, allowed to park 2 vehicles in the same space where previously only can park one. Triple sa-fety device. •Capacity: 3.000 Kg •Maximum lifting height 1,90 m

SECONDARY LIFT INCLUDED


LIFTS - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


HP-125

Electro-hydraulic 1 post lift designed for professional, tire service and body shops and paint workshops. Safety devices and automatic lock release. Symmetric arms with minimum height of 125 mm. • Capacity: 2.500 Kg • Maximum lifting height 1850 mm • Automatic lock release • Mobile kit for movement • 220V single phase (380V three-phase optional)

MB HORSE 28

Low profile portable mini bench (only 105 mm). Ideal for casual work fast me-chanical and sheet metal shop anywhere thanks to its versatility and ease of mo-vement.

• Capacity: 2.800 Kg • Maximum lifting height 1250 mm

• Platfoms length 1550 mm • Swivel arms and extensible supports

• Equipped with wheels for movement

Mobile kit Adjustable front arms




LIFTS

MB HORSE 30 Auto body collision repair system MB Horse-30 takes in the advanced technology of world-renowned compa-nies. This equipment is aiming at practicability, safety and accuracy. The adaptation of modular design con-cept as well as professional division of labor, with our great passion and exquisite workmanship, creates this distinguished quality and technology.

Capacity: 3.000 Kg Bench length: 2505 mm Bench width: 766 mm Lifting heigh: 110-1600 mm Post Max. Tension: 5.000 Kg Post working range: 360º Pneumatic Pressure: 0.5-0.8 MPa Weight: 1200 Kg

ACCESSORIES INCLUDED 1. Bench, made from cold drawing high-alloy steel, is extreme-ly strong. Inner and outer tracks are made from square steel. With all these materials, we guarantee the whole bench’s du-rability and safety.

2. The MB-HORSE-30 can lower down to only 110 mm, there-fore it can make us drive autos on to the bench easily. Besi-des, it can come with other repair equipments

3. Main clamps are very convenient to fix. The mouth of clamp is made from 35 Crm.

4. Post with great working range is strong, precise, safe as well as durable.

5. Equipped with precise two-dimension measuring system, it will help you to handle the measuring work easily.

6. Rich high-tensile pulling clamps and accessories can meet the pulling repair of autos in different shapes and improve work efficiency.

7. Universal data of all kinds of vehicles can meet all the repai-ring needs


SCISSOR LIFTS - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


XT-305E

Mobile hydraulic double scissor lift ideal for quick mecha-nics and tire services. Equipped with mobile kit for movement. Recommended for body and paint repair workshops • Equipped with automatic purge system • Capacity: 3.000 Kg • Electric lock release • Maximum lifting height 1,00 m • Platforms length 1,40 – 1,91 m

XT-300 Hydraulic double scissor lift. It doesn’t need any work for installation, as it is placed on the ground. This scissor lift is equipped with two cylinders in each scissors and double inde-pendent hydraulic circuit, to ensure safety at all times. Recom-mended for quickly mechanics, general mechanics, tires ser-vices and body and paint repair workshops. Extremely low lift platform height. • Capacity: 3.000 Kg • Maximum lifting height 1,90 m • Platforms length 1,57 – 2,00 m • Extendable platforms on one end. • Access ramps anchored to the ground • Possibility of flush mounted XT-300A

• Capacity: 3.000 Kg • Maximum lifting height 1,90 m • Platforms length 1,50 – 2,00 m • Access ramps anchored to the lifting platform

WITH MOBILE KIT!




LIFTS

XT-350 Hydraulic double scissor lift. It doesn’t need any work for installation, as it is placed on the ground. This scissor lift is equipped with two cylinders in each scissors and double independent hydraulic circuit, to ensure safety at all times. Recommended for quickly mechanics, general mechanics, tires services and body and paint repair workshops. Extremely low lift platform height. • Capacity: 3.500 Kg • Maximum lifting height 1,90 m • Platforms length 1,50 – 2,00 m • Access ramps anchored to the lifting platform • Possibility of flush mounted

TAL-15 New mobile lifting and tilting lift it is very low to enable you to slide it under the car, it has wheels fitted to it to make it roll easy. Great for removing axles suspension units subframes front wheel drive gearboxs ie doing clutches there is nothing in the way . • Capacity: 1.500 Kg • Maximum lifting height 585 mm • Minimun lifting height 150 mm • Its width allows adjustment picking up on the narrow chassis


SCISSOR LIFTS - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


XT-35A Hydraulic double scissor lift flush mounted. Ideal for fast mechanical services, general mechanics, tires service and body and paint repair workshops. •Capacity: 3.500 Kg •Maximum lifting height 2,23 m (SUPER ALTO) •Platforms length 1,54 – 1,74 m •Extendable platforms on one end.

XT-35B Hydraulic double scissor lift flush mounted. Ideal for fast mechanical services, general mechanics, tires servi-ce and body and paint repair workshops. • Capacity: 3.500 Kg • Maximum lifting height 2,13 m • Platforms length 1,65 – 2,05 m • Extendable platforms on both ends.

All-terrain and pickup support bars

NOT INCLUDED

OPTIONAL ACCESSORIES XT

Silent

and durable

aluminum engine

Synchronization by

Air actuated locks

Steel wheels

SAFETY DEVICES




LIFTS

ALIGNMENT SCISSOR LIFT Electrohydraulic double scissor lift specially designed for alignment. Equipped with auxiliary lift up to 5000 kg integrated into both platforms. Can be surfaced mounted or flush mounted in-ground.

• Maximum lifting height 2,16 m • Platforms length 5,00 m

XT-5500 XT-5500D

• Capacity: 5.000 Kg • Capacity: 5.000 Kg • With play detector

Play detector

Place of turntables Slide rear plates included Auxiliary lift Mechanical safety lock

ACCESS RAMPS

OPTIONAL

IMPACT WRENCH

LLI-1/2 LLI-1/2C LLI-3/4 LLI-1

• Drive: 1/2" • Working torque: 900 N • Case and socket set: M9, M10, M11, M13, M14, M17, M19, M22, M24, M27

• Drive: 1/2" • Working torque: 520 N • Reduced size and weight

• Drive: 3/4" • Working torque: 1200 N • Case and socket set: M21 y M23

• Drive: 1" • Working torque: 3200 N • Case and socket set

• BODY DOUBLE impact wrench equipped with two impact high performance hammers


WHEEL ALIGNER - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


AL-2000S

Wireless Wheel Aligner for cars and light commer-cial vehicles. Quick and easy to use; It has a very intuitive software that facilitates operations on the vehicle.

• 6 CCD cameras • 2 sensors and 2 repeaters • Wireless communicating through Zigbee to avoid interference. • 3D navigation program • Database with more than 30.000 vehicles

AL-5000

Wireless Wheel Aligner for cars and light com-mercial vehicles. Using advanced 8-CCD came-ras and infrared light sources, this Wheel Aligner is capable of accurately determining angles and calculations to an astonishingly high degree of precision.

• 8 cameras CCD • 4 sensors • Wireless communicating through Zigbee to avoid interference. • 3D navigation program • Database with more than 30.000 vehicles

Windows Operating System

ZigBee Comunication

Wireless sensors

WiFi adapter preinstalled

Multi-Language Software

Updatable database

Technical assistance and training available

2 sensors 2 repeaters

4 clamps

2 turntables

Steering wheel lock Brake pedal lock

Set of PC and monitor

4 sensors

4 clamps

2 turntables



Printer




ALIGNERS

AL-8000 3D Wheel aligner with laser technology for cars and light commercial vehicles, performs angle measurements from the actual move-ment of the vehicle. Very fast and accurate reading process. Minimise working times during the alignment process. A proprietary graphic display is used with high-definition cameras to provide visual and directional assistance during all alignment measuring proce-dures.

• HD special industrial cameras • 4 mini targets • Telemetric horizontally support adjustable height • Simultaneous measurement of all angles of adjustment • Various alignment processes • Multi-language and 3D navigation software • Various print formats • Updatable database • Training courses available

4 targets

4 clamps

2 turntables



Printer

4 rubber wedges

LED double display screen

HD special industrial cameras

Self-diagnosis and correction function

Working efficiency management function

Usable for long wheel-base vehicles adjust-ment

All chassis data measu-rement including wheel-base, Wheel track, axle offset and etc.

Multiple compensation ways or not compensa-tion


TIRE CHANGER - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


DT-90

Simple and robust semi-automatic tire changer. Designed for mounting and dismounting tires of car, van and motorcycle. Optional assist arm for run-flat tires.

• Rim diameter: 10”-22” • Max. wheel diameter: 1.000 mm • Max. wheel width: 330 mm • Power supply: 220V • Opcional assist arm

DT-704

Automatic tire changer with right assist arm optional. Designed for mounting and dismounting tires of car, van and motorcycle. Powerful bead breaker.

• Rim diameter: 10”-24” • Max. wheel diameter: 1.050 mm • Max. wheel width: 330 mm • Power supply: 380V • Opcional assist arm

OPCIONAL

ASSIST ARM

OPCIONAL

ASSIST ARM




DT-95

Automatic tire changer with right assist arm for run-flat tires. De-signed for mounting and dismounting run-flat tires and alloy rims as well as tires of car, van and motorcycle. Powerful bead breaker. • Rim diameter: 12”-24” • Max. wheel diameter: 1.100 mm • Max. wheel width: 380 mm • Power supply: 220V-380V • Included assist arm • Inflation jets, quick inflation device for tubeless tires in clamps

TIRE CHANGERS

Super jets

DT-100

Automatic tire changer with center post system and leverless dis-mounting tool. Equipped with right assist arm. Designed for mounting and dismounting tires of cars, SUV, 4x4 y vans.

• Rim diameter: 10”-30” • Max. wheel diameter: 1.100 mm • Max. wheel width: 381 mm • Power supply: 3ph / 380V • UP-DOWN head, which reduces the pressure applied to the tire during mounting and dismounting thereof, with pneumatic control. • Included assist arm • LOCK-AIR self-centering system fast axial locking chuck • Pneumatic folding working arm • Equipped with double speed engine


TIRE CHANGER - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


DT-1000A

Robotic pneumatic tire changer. Designed for mounting and dis-mounting all types of wheels effortlessly and save as much as possi-ble time. For run-flat, BSR, CSR, Pax and traditional tires. • Automatic positioning of the tool • Multifunction control panel • Integrated wheel lift • Instant Booster bead breaker • Equipped with lower camera • Rim diameter: 14”-28” • Max. wheel diameter: 1.200 mm • Max. wheel width: 380 mm • Power supply: 380V

DT-1000H

Robotic hidraulic tire changer. Same features as DT-1000A

• Rim diameter: 14”-32”

• Scrollable central support

ACCESSORIES DT-100 ACCESSORIES FOR TIRE CHANGERS

UP-2 Plastic mount/desmount head

UP-1 Plastic mount/desmount head

ER-2 Quick change head assembly

UM-002 Motocicle mount/desmount head

GP-1 Plastic inserts for mount/desmount head

DT-003 Hands free clamp for “run-flat” tires

GM-1 Morocicle rim adap-ter clamps

Universal adapter for “without a true center" wheels

GP-2 Plastic inserts for mount/desmount head




DC-65

Electro-pneumatic truck tire changer. Designed for moun-ting and dismounting truck, bus, agricultural and industrial wheels. Compact tire changer ideal for mobile workshops. • Compact tire changer ideal for mobile workshops • Two-speed rotation • Super robust, prevents tensile stress to the vehicle chassis. • Rim diameter: 13”-27” • Max. Wheel diameter: 1.600 mm • Max wheel width: 780 mm • Max. wheel weight: 1.500 kg • Power supply: 380V

DC-85

Electro-pneumatic truck tire changer. Designed for moun-ting and dismounting truck, bus, agricultural and industrial wheels. • Rim diameter: 14”-56” • Max. Wheel diameter: 2.300 mm • Max wheel width: 1.065 mm • Max. wheel weight: 1.500 kg • Power supply: 380V

DC-130

Electro-pneumatic truck tire changer. Designed for mounting and dismounting truck, bus, agricultural, industrial and forestry wheels. • Rim diameter: 14”-56” • Max. Wheel diameter: 2.400 mm • Max wheel width: 1.300 mm • Max. wheel weight: 1.800 kg • Power supply: 380V

TIRE CHANGERS

ACCESSORIES FOR TRUCK TIRE CHANGERS

Steel rim clamp Aluminum rim clamp Aluminum wheels claws protection Claws extensions up to 56"


WHEEL BALANCERS - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


ET-58

Wheel balancer, robust and easy to use. Designed to balance cars, vans, 4x4 and wheels; and the possibility to balance motorcycle wheels (adapter not included). Equipped with electronic brake. • Rim diameter: 10”-24” • Rim width: 1,5”-15” • Max. wheel weight: 75 kg • Manual entry of wheel data • Balancing modes: dynamic, static, 4 ALU modes, motorcycle mode and OPT mode. • Power supply: 220V

ET-806

Semi-automatic wheel balancer, robust and easy to use. Desig-ned to balance cars, vans and 4x4 wheels; and the possibility to balance motorcycle wheels (adapter not included). Equipped with electronic brake and operated brake pedal. • Rim diameter: 10”-26” • Rim width: 1,5”-20” • Max. wheel weight: 75 kg • Automatic entry of wheel data • Balancing modes: dynamic, static, 5 ALU modes, 3 motor-cycle modes and OPT mode. • Power supply: 220V

ET-40

Manual wheel balancing, light and easy to use wheels, is the perfect choice for smaller service shops or mobile wheel service companies. Designed to balance cars, vans and motorcycle wheels (adapter not included). Equipped with operated brake pedal. • Rim diameter: 10”-24” • Rim width: 1,5”-20” • Max. wheel weight: 40 kg • Manual entry of wheel data • Balancing modes: dynamic, static, 4 ALU modes and OPT mode. • Operates on both 220V and 12V DC power • Power supply: ET-40A 220V ET-40B 220V DC12V




WHEEL BALANCER

EC-40

Semiautomatic truck wheel balancer, robust and easy to use. Designed for balancing all types of wheels: car, van, 4x4 and trucks. Color monitor and 3D indications.

• Rim diameter: 10”-32” • Rim width: 1,5”-20” • Max. wheel weight: 200 kg • Power supply: 220V

INCLUDED ACCESSORIES

Wheel width caliper Quick nut

Pressure cup Set of cones

Wheel weight pliers

OPTIONAL ACCESSORIES

UE-36/40 - Motorcycle adapter kit UC-36/40 - Universal adapter kit KF-36/40 - Truck adapter kit

ET-810

Automatic wheel balancer, robust and easy to use. Designed to balance cars, vans, 4x4 wheels and motorcycle wheels (adapter not included). Color monitor and 3D directions. Equipped with electronic brake and pedal operated brake. • Especially suitable for high-performance tires and special formats • Rim diameter: 10”-32” • Rim width: 1,5”-20” • Max. wheel weight: 75 kg • Automatic entry of all wheel data • Balancing modes: dynamic, static, 9 ALU modes, 3 motorcycle mo-des and OPT mode. • Power supply: 220V


A/C MACHINES - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


A/C Recover, Recycle, Evacuate and Recharge A/C System

AC-280 AC-280N AC-380 • Up for cars and vans • Refrigerant R134a

• Up for cars and vans • Refrigerant R1234

• Up for cars, trucks and buses • Refrigerant R134a

DF-01

A/C leak detection kit. It includes: • Needle charger • 6 leak discovery dye for R12 y R134a systems

• 2 bottles of 30 ml leak discovery dye for R12 y R134a systems

• Cleaner bottle 105 ml. • Pipe charger, quick coupler, one-way valve and accesories

• Protective glasses (UVS-40) • Led lamp

• Case and user manual

A/C

MAQU

INES

Fully automatic air conditioning stations designed to recover and recharge the refrigerant gas in the vehicles' AC system. It recovers, recycles, evacuates, leak tests, and recharges refrigerant gas quickly and accurately. Fully automatic fun-ction lets you recover, vacuum, leak test, charge, and then walk away. • Automatic Dye Inject gives the user the ability to use the machine to inject UV dye into a vehicle's A/C system. • Automatic oil measure and inject • A/C System Flush - flushes a vehicle's A/C system with refrigerant eliminating any residual oil or other liquid conta-minants from the system. • Printer: Save and Print Before and After Service Data • Indicator light and notification alarm notifies the user when service is complete, or if a problem has occurred. • Updatable • Data base • Self-calibration • HP and LP hoses 2.5 m each one. • Vessels for new and used oil




NITROGEN INFLATOR/GENERATOR

Advantages of tire inflation with nitrogen: • Constant tire pressure • Extends the life of tires • Reduce fuel consumption • Increased reliability on the road • It prevents oxidation of rims and tires

GN-700S

Nitrogen generator and inflator designed to inflate tires with nitrogen instead of air. • Automatic process • Use: cars and light commercial vehicles • Hose: 10 m • Nitrogen Purity 95-99,5% • Pressure up to 10 bar

GN-1000

Nitrogen generator and inflator designed to inflate tires with nitrogen instead of air. Large LED display and simplified control panel. Automa-tic diagnosis system. Last adjustment record. Internal nitrogen tank with outlet to external tank. • Automatic process • Use: cars and light and heavy commercial vehicles • Hose: 10 m • Nitrogen Purity 97-99% • Pressure up to 10,5 bar

A/C AND NITROGEN MACHINES


AIR COMPRESSORS - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


PISTON AIR COMPRESSOR

Piston air compressors ideal for professional use in small and large workshops, its robust construction allows it to work conti-nuously, with very low maintenance. CA-50

• 10 bar – 2 cv – Tank 50L CA-100

• 10 bar – 3 cv – Tank 100L CA-200

• 10 bar – 3 cv – Tank 200L CA-300

• 10 bar – 5,5 cv – Tank 270L CA-500 • 10 bar – 7,5 cv – Tank 500L

CA-500T • 14 bar – 10 cv – Tank 500L

SILENT PISTON AIR COMPRESSOR

Silent piston air compressors particularly suitable for installa-tions that require low noise emission and compressor-pot set in one piece. Cooling system using large diameter fan. Piston head with cast iron cylinder for longer life, centralized control panel, full accessibility to inside.

CAI-200

•10 bar – 3 cv – Tank 200L CAI-300

•10 bar – 7,5 cv – Tank 270L CAIS-300 (with dryer)

•10 bar – 7,5 cv – Tank 270L CAI-500

•10 bar – 7,5 cv – Tank 500L

CA-24AGRI

Air compressor with petrol engines for use where there is no available electric power supply. The CA-24 AGRI is a professional compressor with two pistons driven by a heat engine belt Honda 4-stroke petrol. Equipped with pressure switch with manual reset thermal protection, pressure gauge, pressure regulator, safety valve, drain valve, handle and transport wheels. The head runs at low speed which ensures a long life.

•10 bar – 5,5 cv – Tank 24L




AIR COMPRESSORS

SCREW AIR COMPRESSOR

Large range of low noise screw air compressors, which are ideal for customers who need a complete and easy air station to use, suitable for continuous and steady working. Simple and affordable but with advanced technology.

CAT-100 • 9 bar – 3 cv – Tank 90L

CAT-300 • 10 bar – 7,5 cv – Tank 270L

CATS-500/7,5 • 10 bar – 7,5 cv – Tank 500L

CATS-500/10 • 10/13 bar – 10 cv – Tank 500L

CATS-500/15 • 10 bar – 15 cv – Tank 500L

CATS-500/20 • 10 bar – 20 cv – Tank 500L *CATS - with dryer

AIR HOSE REELS

Retractable hose reels for compressed air with closed casing and flexible hose. Easy to assemble, manage and collect. Security plugs.

EN-100

EN-150P EN-150

• Plastic shell • Hose: 10 m • Max. pressure: 15 bar

• Plastic shell • Hose: 15 m • Max. pressure: 24 bar

• Metallic shell • Hose: 15 m • Max. pressure: 20 bar

New Silver 7,5

• 10 bar – 7,5 cv

New Silver 10

• 10 bar – 10 cv

New Silver 20

• 10 bar – 20 cv


ULTRASONIC CLEANERS AND DIAGNOSIS TOOL - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


ULTRASONIC CLEANERS

Ultrasonido - 003M / 010M

Ultrasonic cleaner with mechanical control

With heater and timer Stainless tank and basket

Ultrasonic cleaning machines designed for professional use, highlights its parts cleaning procedure and high frequency of cleaning. With stainless tank and basket with high wear resistance.

Ultrasonido - 003D / 010D

Ultrasonic cleaner with digital control

With heater and timer With drainage valve Stainless tank and basket

Ultrasonido-010S / 030S

Ultrasonic cleaner with power adjustable control

With heater and timer Ultrasonic power adjustable With drainage valve Stainless tank and basket

ULTR

ASON

IDOS

Model Capacity Tank Size Frecuency Ultrasonic Power

Heater Power Timer Heater

temperture Unit Size

Ultrasonido 030M 3.2 L 240*135*100 mm 40 KHz 120 W 100 W 0-30 min 20-80 ºC 265*165*230 mm Ultrasonido 010M 10.0 L 300*240*150 mm 40 KHz 240 W 200 W 0-30 min 20-80 ºC 325*265*280 mm




Ultrasonido 003D 3.2 L 240*135*100 mm 40 KHz 120 W 100 W 0-30 min 20-80 ºC 265*165*230 mm Ultrasonido 010D 10 L 300*240*150 mm 40 KHz 240 W 200 W 0-30 min 20-80 ºC 325*265*280 mm




Ultrasonido 010S 10 L 300*240*150 mm 40 KHz 80-200 W 200 W 0-30 min 20-80 ºC 325*265*280 mm Ultrasonido 030S 30 L 500*300*200 mm 40 KHz 200-500 W 500 W 0-30 min 20-80 ºC 520*310*335 mm




Diagnosis Tool PS-90

DIAGNOSIS

FAST

INTELLIGENT

POWERFUL

WIRELESS

Accurate live data in both Graph and Wave form

Special Functions: Key programming, Mi-leage adjustment, ABS bleeding, service light reset, DPF regenera-tion, steering angle calibration, battery re-

set, throttle body adaptation，EEPROM...

Complet case with connectors

Full System Diagnosis: Engine, ABS, Airbag, Transmission, Immobilizer, Body (ECM), Chassis…… Basic Functions: Read fault codes, clear fault codes, live da-ta, actuation Special Functions: Key programming, Mileage adjustment, ABS bleeding, service light reset, DPF regeneration, steering angle calibration, battery reset, throttle body adaptation，EEPROM...

Diagnosis report: Save the fault code report and print it out for your customers. Save the live data and review it anytime you want. Key codification. In some vehicles it can add more coded keys and remove the PIN CODE from the ECU to generate a new key, depending on the vehicle system. Data Recording. At any time during diagnosis, the tool can save screenshot or even record data in real-time of the diagnostic information that gives the tool. This information can be sent to a PC for reporting or print it directly. Connectivity to Internet, WiFi, Network and USB. The equip-ment allows to connect to a PC via WiFi, USB or network cable to download the information obtained in the diagnosis or to update the software. Extensive vehicle coverage: Americans, Europeans and Asians. Complete kit of specific OBD connectors. It allows the con-nection with vehicles which don’t have 16 pins OBDII connector. OPTIONAL: Truck diagnosis software, Autodata online and 2-channel oscilloscope.


WORKSHOP EQUIPMENT - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


GTN-10 GTN-315 GTN-421

• 10 Tn Pneumatic Hydraulic Jack • Height range: 170-576 mm • Air pressure: 6,5-7,5 Bar • Weight: 155 Kg

• 15/30 Tn Pneumatic Hydraulic Jack • Height range: 185-470 mm • Air pressure: 7,5-8,5 Bar • Weight: 65 Kg

• 10/20/40 Tn Pneumatic Hydraulic Jack • Height range: 135-385 mm • Air pressure: 7,5-8,5 Bar • Weight: 58 Kg

GNB-35

• 35 Tn Pneumatic Hydraulic Bottle Jack • Height range: 250-414 mm • Air pressure: 6,5-7,5 Bar • Weight: 42 Kg

GTN-632

• 60/35/20 Tn Pneumatic Hydraulic Jack • Height range: 180-415 mm • Air pressure: 7,5-8,5 Bar • Weight: Kg

GTN-420

• 20/40 Tn Pneumatic Hydraulic Jack • Minimum height: 150 mm • Lifting height: 40T+74mm / 20T+68mm • Extension height: 75 mm + 45 mm • Air pressure: 8-10 Bar • Weight: 38 Kg

GTN-420A

• 20/40 Tn Pneumatic Hydraulic Jack • Height range: 170 mm • Lifting height: 40T+70mm / 20T+62mm • Extension height: 75 mm + 45 mm • Air pressure: 6-8 Bar • Weight: 53 Kg




JACK STANDS

WORKSHOP

EQUIPEMNT

GT-2T GT-3T GT-5T

2 Tn Low profile floor jack • Lifting range: 76-510 mm • Weight: 42 Kg

3 Tn Extra long floor jack • Lifting range: 140-525 mm • Weight: 50 Kg

5 Tn Extra long floor jack • Lifting range: 150-583 mm • Weight: 30 Kg

GS-500

500 Kg Transmission Jack • Min. height: 1.135 mm • Max. height: 1.950 mm • Weight: 31 Kg

GS-1500

1.500 Kg Transmission Jack • Min. height: 1.195 mm • Max. height: 1.985 mm • Weight: 59 Kg

GT-20A GT-30F GTC-500

2 Tn Aluminum Floor Jack • Lifting range: 130-500mm • Weight: 21 Kg

3 Tn Floor jack • Lifting range: 130-500 mm • Weight: 38 Kg

4 Tn(end) 5 Tn (post) Forklift Jack • Min. height: 70mm(end) 320mm (post) • Max. height: 365mm (end) 415 mm (post) • Weight: 45 Kg

ST-30 • Capacity 3 T • Lifting range: 295-415 mm








MOTORCYCLE EQUIPMENT

EM-450

Motorcycle lifting table, with manual lock to secure the lift at any height.

• Capacity: 450 Kg • Maximum lifting height 0,75 m • Platform length: 2,20 m • Equipped with wheels to move it

XT-100E

Electro-hydraulic scissor lift up to 700 kg ideal for motor-cycles workshops. Equipped with safety devices and wheel lock. • Capacity: 700 Kg • Maximum lifting height 1,20 m • Platform length: 2,20 m

Accessories XT-100Q

Side extensions

Removable rear platform

EM-400

Motorcycle lifting jack

• Capacity: 500 Kg • Lifting height 100 - 340 mm

EM-400A


• Capacity: 500 Kg • Lifting height 90 - 405 mm

MS-700


• Capacity: 680 Kg

MS-400

Motorcycle parking stand


Front wheel lock




MS-680

Motorcycle central support stand


MS-200

Motorcycle support stand for rear wheel • Capacity: 200 Kg

MS-300

Motorcycle support stand for front and rear wheel


WORKSHOP

EQUIPEMNT

MM-500

Motorcycle lifting table


• Lifting height: 890 mm

MS-500

Motorcycle lifting table


MS-100

Motorcycle support stand for front wheel • Capacity: 100 Kg

MS-280


MS-320


MS-350


MS-480

Motorcycle support stand for rear wheel





SHOP PRESS

PS-15T Bench shop press up to 15 tons with movable head and adjus-table height bed, is ideal for quick jobs. Includes two heel blo-cks.

PS-30 Hydraulic shop press up to 30 Ton with movable head and adjustable height bed, designed for automotive, truck, implement, fleet and industrial repair shops where pressing, bending, straightening, forming, holding is required. Includes two heel blocks.V

PSA-25

Kit 8 mandrels for shop press

PS-75T Electro-hydraulic shop press up to 75 tons. It has movable head (rapid rise and fall) for user comfort and adjustable height bed frame. Head with overload protection. It includes two heavy-duty heel blocks.




PM-1T PM-2TS PM-2T

• Capacity: 1000 Kg • Lifting height: 250 - 2000 mm

• Weight: 75 Kg

• Capacity: 2000 Kg • Lifting height: 250 - 2300 mm • Weight: 105 Kg

• Capacity: 2000 Kg • Lifting height: 230 - 2650 mm • Weight: 160 Kg

WORKSHOP

EQUIPMENT

FOLDING ENGINE CRANES

Folding engine cranes up to 1 and 2 T capacity. Indispensable in any workshop thanks to its versatility and maneuverabil-ity. Its design with folding legs, makes this crane occupies very little space and can be saved in any corner when is not in

RF-1

Optical headlight aimer, suitable for verification and adjustment of all types of headlights: filament, halogen, xe-non and LED . Equipped with electro-nic light meter.

VZ-1100 VZ-2000

Tire vulcanizer designed to repair da-maged tires and inner tubes. Equipped with double resistance. It has 3 different types of couplings to fit the contour of the tire. Safety device that controls tem-perature and prevents overheating. • Max. Power: 1000W

Tire vulcanizer with table designed to repair da-maged tires and inner tubes. Equipped with up,down and side mold,to better repair all sides of the tire. Top arm and side arm can turn around 90°. Safety device that controls temperature and prevents overheating. • Max. Power: 2000W




BP-AC-01/02 BP-AC-04 BP-AC-05 BP-AC-06 BP-AC-07 BP-AC-08 Plastic bins for tool panel Short double

metal hook Metal hanger Tool support

370x65x34 mm Short metal hook Large double metal

hook

ACCESSORIES

BP-152C BP-203C Workbench + tool panel with 2 drawers Overall - 1500x640x1550 mm

Workbench + tool panel with 3 drawers Overall - 2000x640x1550 mm

LUBRICATION EQUIPMENT

LB-80 LB-90 LB-500 LB-400 LB-35 Pneumatic oil extractor ● Capacity: 80L

Pneumatic oil extractor ● Capacity: 90L

Oil Dispensing Trolley Kit Oil Dispensing Kit Pneumatic grease pump




WORKSHOP

EQUIPMENT

EN-10E DS-100 DS-200

Electric hose reel • Plastic shell • Hose: 10+1 m • Cable section: 3x2,5 mm2

Electrical circuit tester • Featuring AVOmeter, test light, built-in flash-light, short circuit indicator, relay/component tester, continuity tester and bad ground indi-cator

Battery Tester • Performs: battery test, cranking test, charging system and rectifier diode test and other functions

Hydropneumatic high precision pump designed to act on all types of sheet metal equipment repair. Aluminum cover

Hydropneumatic bead breaker • Capacity: 5 Ton • Range: 127 mm

BAP-5200 DLT-5200

AS-1M20 AS-2M70 AS-3M

Vaccum cleaner - 1 engine • Capacity: 20L • Power: 1400W

Vaccum cleaner - 2 engines • Capacity: 70L • Power: 2000W

Vaccum cleaner - 3 engines • Capacity: 80L • Power: 3000W

NEW PRODUCTS 2016


RUBBER PAD - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


RUBBER PADS FOR LIFTS

G6

A= 150 mm L= 245 mm h= 85 mm

G9 G9b

G1 Adaptable to Rotary, Ravaglioli, Space

G4 Adaptable to Cascos, AGM

G5 Adaptable to Cascos, AGM

G8

G10 Adaptable to Ravaglioli, Space

G11

G18 Adaptable to Ravaglioli



G21 Adaptable to OMCN




G12

A= 130 mm L= 440 mm h= 25 mm

G2

A= 120 mm L= 160 mm h= 60 mm

G3

A= 120 mm L= 160 mm h= 40 mm

G14

A= 120 mm L= 160 mm h= 20 mm

G15

A= 120 mm L= 160 mm h= 100 mm

G22

Adaptable to OMCN.

G24

A= 100 mm L= 118 mm h= 58 mm

G25

Adaptable to Ravaglioli.

CONSUMIBLES

G7

G16

Ø= 100-90 mm h= 81 mm

G17

Ø= 68-60 mm h= 50 mm

G23

Adaptable to Ravaglioli

G28

G29

Adaptable to Ravaglioli, Sirio, Space

SILENTBLOCK PAD

WORKSHOP

EQUIPMENT


BATTERY CHARGERS AND STARTERS - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


BA

TT

ER

Y C

HA

RG

ER

S

Alpine Boost 20 Battery charger for charging free electrolyte batteries (WET) with 12/24V voltaje. • Equipped with selector for normal or quick (BOOST) charge and ammeter. • WET/START-STOP batteries up to 180A. Range: 30-225 Ah 15h • Power supply: 230V 1PH



Doctor Charge 50 Electronic BATTERY MANAGER for total maintenance of WET, GEL, AGM, MF, SPIRAL, START-STOP batteries at 6/12/24V and for support activities when intervening on vehicles • Automatic charge and maintenance of batteries with PULSE TRONIC technology, recovery of sulphated or very discharged batteries • Battery tests such as voltage at terminals, starting capacity and operational check of the vehicle alternator • Range: 10-600 Ah 15h • Power supply: 230V 1PH

Alaska 200 START Battery charger and maintainer with electronic control of the charging current, automatic interruption and restart (TRONIC), for charging lead-acid batteries with 12/24V voltage • Equipped with selector for normal or quick (BOOST) charge and ammeter. • WET/GEL/AGM: SPIRAL, MF, START-STOP batteries. Range: 25/30/300-160 Ah 15h • Power supply: 230V 1PH

T-Charger 12 Intelligent battery charger and maintainer with electronic control of the charging current, automatic interruption and restart (PULSE-TRONIC). • 3 charge current levels • Range: 2-70 Ah 15h • Power supply: 230V 1PH

ST

AR

TE

R

ProSTART 2824 Battery-powered starter suitable for 12-24V starting of cars, vans, boats, agricultural vehicles, power sources etc. Complete with: 230V AC 12V DC power adaptor, positive-negative cables with clamps, high efficiency lamp, double jack cable. • Max. Starting current: 2500 A • Power supply: 230V 1PH

CH

AR

GE

R A

ND

ST

AR

TE

R

DigiStart 340 Pulse Digital battery charger and starter with electronic control of the charging current, automatic interruption and restart (PULSE-TRONIC) for charging all types of batteries with 12/24V voltages and quick starting of cars, vans and light trucks. • Max. Starting current: 300A • Range: 10-450 Ah 15h • Automatic connection and disconnection • Constant current load programmable from the control panel • Power supply: 230V 1PH

Dynamic 520 Start Battery charger and starter for charging free electrolyte batteries (WET) with 12/24V voltage and starting all kinds of cars, vans and light trucks. Choice of normal charge, quick charge (BOOST) and quick start . Alimentación: 230V 1PH • Max. Starting current: 400A • Range: 20-1000 Ah 15h • Power supply: 230V 1PH




WELDING

PLA

SM

A

Tecnica PLASMA 31 Inverter, compressed air plasma cutting system, with contact striking of pilot arc. Complete with torch. • Max. Absorbed power: 2,8 kW • Max. cutting thickness: 8 mm • Compressed air capacity: 100l/min a 6 Bar • Power supply: 230V 1PH

Technology PLASMA 54 Kompressor Inverter, compressed air plasma cutting system, with contact striking of pilot arc. • Max. Absorbed power: 4,5 kW • Max. cutting thickness: 10 mm • Power supply: 230V 1PH

Enterprise PLASMA 160Hf Chopper, compressed air plasma cutting system, with high frequency HF striking of pilot arc. • Max. Absorbed power: 25 kW • Max. cutting thickness: 45 mm • Power supply: 230-400V 3PH

PLASMA CUTTING AND WELDING

MIG-MAG WELDING

MIG

MASTERMIG 220/2 MIG-MAG/BRAZING welding machine. Designed for continuous and spot welding with electronic regulation of spot welding time. Complete with MIG-MAG welding accessories. • Current range in DC: 20-220 A • Adjustable power: 0-4 / 4-6,5 kW • Welding wire diameter: up to 1 mm (steel, stainless steel, high strength steels and aluminium) • Power supply: 230-400V 3PH

MASTERMIG 270/2 MIG-MAG/BRAZING welding machine. Designed for continuous and spot welding with electronic regulation of spot welding time. Complete with MIG-MAG welding accessories. • Current range in DC: 28-270 A • Adjustable power: 0-5,5 / 5,5-9 kW • Welding wire diameter: up to 1,2 mm (steel, stainless steel, high strength steels and aluminium) • Power supply: 230-400V 3PH

BIMAX 162 TURBO FLUX (no gas) and MIG-MAG (gas) welding machine. With thermostatic protection. Complete with FLUX welding ac-cessories. • Current range in DC: 30-145A • Adjustable power: 0-1,4/1,4-3,7 kW • Welding wire diameter: up to 0,8 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH

MIG

-TIG

-MM

A

INVERPULSE 320 MIG/TIG/MMA Microprocessor controlled, MIG-MAG (continuous, PULSE, double pulse - PULSE ON PULSE), FLUX/BRAZING,TIG-DC lift and MMA inverter welding machine with built-in 4 rolls wire feeder. Complete with MIG-MAG welding accesso-ries. • Current range in DC: 10-300A • Adjustable power: 0-6/6-10,5kW • Welding wire diameter: up to 1,2 mm (steel, stainless steel and aluminium) - Electrode: up to 6 mm • Power supply: 400V 3PH


WELDING MACHINES - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


MIG

-TIG

-MM

A

INVERPULSE 425 MIG/TIG/MMA +ACC Microprocessor controlled, MIG-MAG (continuous, PULSE, double pulse - PULSE ON PULSE), FLUX/BRAZING,TIG-DC lift and MMA inverter welding machine with 4 rolls, separate wire feeder. Complete with MIG-MAG welding acces-sories. • Current range in DC: 10-400A • Adjustable power: 0-8/8-14kW • Welding wire diameter: up to 1,6 mm (steel, stainless steel, HSS high strength steels, galvanised sheets, aluminium and its alloys) - Electrode: up to 6 mm • Power supply: 400V 3PH

Technomig 150 DUAL Synergic Microprocessor controlled MIG-MAG/FLUX/BRAZING inverter wire welding machine. Fit for NO GAS/Flux welding, it can be transformed into MIG-MAG with the optional kit. Complete with MIG-MAG torch, work clamp and cable. • Current range in DC: 20-150A • Adjustable power: 0-1,2/1,2-2,8kW • Welding wire diameter: up to 0,8 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH

Technomig 180 DUAL EURO Synergic Microprocessor controlled MIG-MAG/FLUX/BRAZING inverter wire welding machine. Fit for NO GAS/Flux welding, it can be transformed into MIG-MAGwith the optional kit. Complete with MIG-MAG torch, work clamp and cable. Euro torch connection • Current range in DC: 30-170A • Adjustable power: 0-1,6/1,6-3,8kW • Welding wire diameter: up to 0,8 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH

MIG

-MA

G

Technomig 215 DUAL Synergic Microprocessor controlled MIG-MAG/FLUX/BRAZING/MMA/ TIG DC-Lift inverter multiprocess welding machine. Complete with MIG-MAG torch, work clamp and cable. • Current range in DC: 20-220A • Adjustable power: 0-2,6/2,6-5,2kW • Welding wire diameter: up to 1 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH

Telmig 170/1 TURBO MIG-MAG welding machine. With thermostatic protection. Complete with MIG-MAG welding accessories. • Current range in DC: 30-160A • Adjustable power: 0-2,3/2,3-5,2kW • Welding wire diameter: up to 0,8 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH

Telmig 180/2 TURBO MIG-MAG welding machine. Designed for continuous and spot welding with electronic regulation of spotwelding time. Complete with MIG-MAG welding accessories. • Current range in DC: 30-170A • Adjustable power: 0-2,3/2,3-5,2kW • Welding wire diameter: up to 0,8 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH

Telmig 200/2 TURBO MIG-MAG welding machine. Designed for continuous and spot welding with electronic regulation of spotwelding time. Complete with MIG-MAG welding accessories. • Current range in DC: 35-220A • Adjustable power: 0-3/3-7kW • Welding wire diameter: up to 1 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH

Telmig 281/2 TURBO MIG-MAG welding machine. Designed for continuous and spot welding with electronic regulation of spotwelding time. Complete with MIG-MAG welding accessories. • Current range in DC: 40-270A • Adjustable power: 0-5/5-9,5kW • Welding wire diameter: up to 1,2 mm (steel, stainless steel and aluminium) • Power supply: 230V 1PH




WELDING

Motoinverter 174 CE HONDA Inverter technology, petrol engine-driven (HONDA engine) welding machine with high frequency permanent mag-nets alternator for electrode MMA and TIG-DC welding with scratch striking. • Current range in DC: 5-160 A • Electrode: 1,6-3,2 mm • DC available power: 1,8 kW 230V 1PH • Enginde Honda CX200 6,5 cv • Gross weight: 40 kg

Motoinverter 254 CE HONDA Inverter technology, petrol engine-driven (HONDA motor) welding machine with high frequency permanent mag-nets alternator for MMA and TIG-DC electrode welding with scratch striking. • Current range in DC: 5-230 A • Electrode: 1,6-5 mm • DC available power: 3 kW 230V 1PH • Engine Honda GX390 11 cv • Gross weight: 73 kg

MMA WELDING

MM

A

Force 125 ACD + HELMET MMA inverter, electrode welding machine in direct current (DC). • Complete with TIGER helmet and MMA welding accessories. • Current range in DC: 10-80 A • Max. Absorbed power: 2,3 kW • Power supply: 230V 1PH

Force 165 ACX PLASTIC CARRY CASE MMA inverter, electrode welding machine in direct current (DC). • Complete with MMA welding accessories and plastic carry case. • Current range in DC: 10-150 A • Max. Absorbed power: 4,1 kW • Power supply: 230V 1PH

Force 168 MPGE ACX PLASTIC CARRY CASE MMA inverter, electrode welding machine in direct current (DC). • Complete with MMA welding accessories and plastic carry case. • Current range in DC: 10-150 A • Max. Absorbed power.: 4,1 kW • Motorgenerator minumun power: 6 kW • Power supply: 230V 1PH

SPOT WELDING MACHINES

SP

OT

WE

LDIN

G

Digital Puller 5500 Microprocessor controlled, electronic system for repairing of metal sheets fit for applications in car body shops. The digital, multifunction control panel allows the automatic regulation of the spotwelding parameters according to the chosen tool. Complete with gun, earth cable with fixing kit, extractor, spindle and pulling stars. • Peak spot-welding current: 3800 A • Rated power X=50% : 1,8 kVA • Power supply: 230V 1PH / 400V 3PH

Digital Spotter 5500 + ACC Microprocessor controlled, spot-welding machine fit for applications in car body shops. The LCD digital, multifun-ction control panel allows the automatic regulation of spot welding parameters according to the chosen tool and sheet thickness. Complete with the "STUDDER" kit for spot welding of screws, washers, rivets and pulling stars, sheet warming and upsetting. • Peak spot-welding current: 4200 A • Rated power X=50%: 2,8 kVA • Max. welding thickness on 2 sheets: 1,5+1,5 mm • Power supply: 230V 1PH / 400V 3PH


WELDING MACHINES - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -


SPOT WELDING MACHINES

Digital Spotter 7000 + ACC Microprocessor controlled, electronic spot-welding machine suitable for use in the car body repair. The digital, LCD, multifunction control panel allows the automatic regulation of spot welding parameters according to the chosen tool and sheet thickness. Equipped with air cooled pneumatic gun and trolley. • Max. spot-welding current: 4500 A • Rated power x=50%: 6,7 kW • Max. welding thickness on 2 sheets: 1,5+1,5 mm • Power supply: 400V 3PH

Inverspotter 12000 Medium frequency, direct current (MFDC) inverter technology, microprocessor controlled resistance (spot) wel-ding machine with water-cooled clamp; suitable for body shop applications and industrial use. Complete with water-cooled pneumatic clamp, water cooling unit, trolley and balancer. • 192 standard programmes and possibility of 240 customised ones • Max. spot-welding current: 11000 A • Rated power x=50%: 25 kW • Max. welding thickness on 2 sheets: 3+3 mm • Power supply: 400V 3PH

Approved by:

SP

OT

WE

LDIN

G

Inverspotter 13500 Smart + Acc Medium frequency, direct current (MFDC) inverter technology, microprocessor controlled resistance (spot) wel-ding machine. Complete with air-cooled pneumatic clamp and trolley. • Automatic recognition of the materials and thickness. • 128 standard programmes and possibility of 400 customised ones • Max. spot-welding current: 12000 A • Rated power x=50%: 4,8 kW • Max. welding thickness on 2 sheets: 3+3+3 mm • Power supply: 400V 3PH

Inverspotter 14000 Smart Aqua + Acc Medium frequency, direct current (MFDC) inverter technology, microprocessor controlled resistance welding machine. Complete with water-cooled pneumatic clamp and trolley. • Automatic recognition of the materials and thickness. • 128 standard programmes and possibility of 400 customised ones • Max. spot-welding current: 14000 A • Rated power x=50%: 9 kW • Max. welding thickness on 2 sheets: 3+3+3 mm • Power supply: 400V 3PH

Approved by:




WELDING

TIG WELDING

FORCE TIG 170 DC - LIFT + Plastic carry case TIG (LIFT striking) and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. • Complete with TIG welding accessories and plastic carry case. • Current range in DC: 10-150 A • Absorbed power: 4,1 kW • Electrode: 1,6-4 mm • Power supply: 230V 1PH

TECHNOLOGY 216 HD ACX + Alu carry case MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. • Complete with MMA welding accessories and aluminium carry case. • Current range in DC: 5-180 A • Absorbed power: 0-3,5 / 3,5-5,5 kW • Electrode: 1,6-4 mm • Power supply: 230V 1PH

TECHNOLOGY 230 DC-HF LIFT + Acc Microprocessor controlled, TIG (high frequency HF or LIFT striking), PULSE TIG and MMA inverter welding machine in direct current (DC). Use with a wide range of materials such as steel, stainless steel, titanium, copper, nickel and their alloys. • Complete with TIG welding accessories. • Current range in DC: 10-220 A • Absorbed power: 0-4,1 / 4,1-6 kW • Electrode: 1,6-4 mm • Power supply: 230V 1PH

TIG

SUPERIOR TIG 421 DC-HF/LIFT + Acc Microprocessor controlled, TIG (high frequency HF or LIFT striking), PULSE TIG and MMA inverter welding machine in direct current (DC) . Use with a wide range of materials such as steel, stainlesssteel, titanium, copper, nickel and their alloys. • Complete with TIG welding accessories. • Current range in DC: 10-350 A • Absorbed power: 0-8/8-14 kW • Electrode: 1,6-6 mm • Power supply: 400V 3PH

SUPERTIG 280/1 AC/DC-HF/LIFT Thyristor-controlled, TIG (high frequency HF and LIFT striking) and MMA welding machine in direct and alternating current (AC/DC). Use with a wide range of materials such as steel, stainless steel, aluminium, titanium, copper, ni-ckel, magnesium and their alloys. • Complete with TIG welding accessories. • Current range: 15-250 A • Absorbed power: 0-6,1/6,1-10,5 kW • Power supply: 400V 2PH

AC

C

TRIBE MMA/MIG-MAG/TIG HELMET Automatic welding helmet ideal for MMA, MIG-MAG and TIG welding. The LCD liquid crystal filter darkens automati-cally when the welding arc is running and quickly returns to its transparent status when the arc is switched off; this means the operator does not need to lower and raise his mask during operations and allows him to work always with both hands freely. Main features: light and comfortable to wear, fixed automatic darkening filter, solar cell powered, transparent glass protection filter.


NOTES - DESIGN - QUALITY - COUNSELING - INSTALLATION - TECHNICAL ASSISTANCE - MAINTENANCE - AFTER SALES SERVICE -





COLLABORATION IN THE TV SHOW “EL HORMIGUERO”

AUDI R8 PRESENTATION AT CIRCUIT MONTEBLANCO (HUELVA)


RSF Maquinaria C/Calvo Sotelo, 26 - 49700 Corrales del Vino (Zamora)

Tel: +0034 980 560 111 Fax: +0034 980 049 487

Email: [email protected]

www.rsf-maquinaria.com

Automotive

RSF-Equipment Catalog 2016 English