Upload
cliford-cabel
View
180
Download
0
Embed Size (px)
Citation preview
Pearl Car Care - Do It Yourself
Headlamp Restoration
Pearl® are fully committed to meet and exceed all customers expectations and so please allow us to take time to share two lines within our range that have such superior capabilities in delivering durability, lustre and beauty Scratch Remover and Oyster Paint Sealant.
PEARL HEADLAMP RESTORATION
Suitable for the renovation of all plastic/acrylic
headlamps and removes scratches, scuffs, yellowing
etc.
Instructions for Use:
Step 1: Remove any surface dirt & contaminants
before brading the area to be renovated with P2000
Wet/Dry sand paper.
Damage Headlamp
Do it Yourself Headlight Restoration
Step 1: Remove any surface dirt & contaminants
before brading the area to be renovated with P2000
Wet/Dry sand paper.
Clean abraded surface before polishing
Step 2: Apply Pearl Scratch Remover #PL053 to
Lambs wool Pad & polish in short bursts, to prevent
excessive heat build-up.
If necessary use a mist of water to keep the surface cool.
Step 3: Re-apply Scratch Remover with Foam Polishing Pad to enhance finish, again polish in short bursts with light pressure applied to the pad.
When polishing process is complete, clean headlamp to allow for inspection.
Do it Yourself Headlight Restoration
If further work is required repeat polishing process again.
Step 4: Apply the Pearl Oyster Paint Sealant #PL042 with a clean cloth and allow to haze before buffing.
For additional protection a second application of the Sealant can be made 15 minutes after the first application
Do it Yourself Headlight Restoration
Restored Headlamp
Visit @ www.Pearlwaterlessinternational.com