5
Battery Isolator Is Vital For Big Vehicles Stereo Systems

Battery Isolator Is Vital For Big Vehicles Stereo Systems

Embed Size (px)

Citation preview

Page 1: Battery Isolator Is Vital For Big Vehicles Stereo Systems

Battery Isolator Is Vital For Big Vehicles Stereo Systems

Page 2: Battery Isolator Is Vital For Big Vehicles Stereo Systems

The energy required for the car stereo is dependent on how big is the auto stereo. After you listen to stereo as soon as the car will be switched off then a battery will forfeit its power and it also becomes not easy to start. The situation we could put a second battery but doing this is not as easy as we say it. With this we require a battery isolator that allows the charging in the battery even though the car is running and this also separates each battery. But wait, how in order to connect a battery isolator may be the real problem. This is easily solved by doing the steps given below.

Page 3: Battery Isolator Is Vital For Big Vehicles Stereo Systems

Tools to be used:

Initial of to do this we demand a few tools and this includes a battery, a blue ring terminals, a battery isolator, a self tapping screw, needle nosed pliers, wire crimpers, a 12 volt test light , wire cutter finally a few wire strippers in addition to a terminal crimping tool. These power tools allow us to finish the job in a neat and the most quicker.

Page 4: Battery Isolator Is Vital For Big Vehicles Stereo Systems

Quick easy steps

The 1st step involves launching typically the cover with the car. Then place the extra battery within the place ship to it. In order to protected their position a 3/8 ratchet and socket is needed.Over the next step by using drill the battery isolator is attached to the fender. To get more secure connection utilizes the brackets and self tapping screws which will come with the battery isolator.

Page 5: Battery Isolator Is Vital For Big Vehicles Stereo Systems

A 4 gauge battery cable is employed to connect the two batteries. It brings together the actual optimistic terminal in the battery to the proper side of the battery isolator. In the same manner we have to connect a wire on the positive terminal of the first battery to the battery isolator. This is successfully done by using a 3/8 ratchet and socket.

In the following step a 18 gauge wire's section operates on the battery's ignition terminal towards steering column by having a grommet . A new 18 gauge wire is linked to the ignition wire with the aid of blue scotch connector and a needle nosed pliers is used so that you can crimp it securely.