Alldata 10.4 Install Manual and Download Tips

www.vtoolshop.com

VTOOLSHOPTel:+86-0755-27823977

Web:http://www.vtoolshop.com

ALLDATA 10.4 Installation Manual

1. Connect the Hard disk to computer and open it, you will see the folder “MTR——10400211”：

2. Open the folder “MTR——10400211”, click “Setup.exe’ to install the ALLDATA:

www.vtoolshop.com



3. It asks for the Product Registration information, fill in any information you want:

www.vtoolshop.com



4. Click “No”:

www.vtoolshop.com



5. click “Yes”:

6. Click “Finish” button to exit the installation:

www.vtoolshop.com



.

7. Copy the following two files to ALLDATA software installation:

www.vtoolshop.com



Here is my installation directory, click “Yes” to over write the old one:

www.vtoolshop.com



8. Click “Ace” in installation directory to start the ALLDATA:

www.vtoolshop.com



9. Click “New car” to select the car model:

www.vtoolshop.com



Here is the Honda for a example:

www.vtoolshop.com



Click “Ok” button, it will pops up this window: You need to load the IMP1Q111 folder.

www.vtoolshop.com



10. Here is the operation to load the vehicle database to ALLDATA:

11. click DATA button on the left top and select “Device”:

12. click “Connect”:

www.vtoolshop.com



13. select the hard disc label of the all data (Here it is E in my computer:, in your computer it may

be others): The “IMP1Q111” folder is in hard disk E named “ALLDATAW”

www.vtoolshop.com



Paste the file path of IMP1Q111 (ALLDATA\IMP1Q111)

www.vtoolshop.com



14. click OK to save the path of IMP1Q111

15. If you want to select other vehicle model, just follow the same steps 11 to 14.

Automotive

Alldata 10.4 Install Manual and Download Tips