WT Henley CNE Single Pole Street Lighting Cutout - 54715-12

Preview:

Citation preview

UUnnddeerrggrroouunndd DDiissttrriibbuuttiioonn

Fuse Service Equipment

Street Lighting CutoutsRated at 25A for single phase supplies.

W T Henley has a choice of two slim-linesingle phase models, incorporating eithera single pole or double pole switchingaction. Both of these are manufacturedfrom glass re-inforced flame retardantmaterials, designed to be robust yetlightweight, incorporating a low force leverrelease system.

All the Street Lighting Cutouts aredesigned to meet the requirements of BS7654:2010 and are configured for SNE orCNE cables as required. Each is designedwith a drip proof hood.

These units not only allow the looping inand out of single phase supplies but whenused in conjunction with our optionalterminals and shrouds, will also suit a 3-phase supply.

All W T Henley cut-outs are designed toaccept offset tag type fuse-links (LST) andare supplied complete with fixing screwsand cable entry bushes.

At the heart of maintaining the supply to street lightingluminaires are robust and reliable fused Cutouts.

• IPC (Insulated Piercing Connector)version requiring no stripping ofInsulation.

• Padlocking ‘dead’ facility available.

• Supplied with incoming/outgoingbushes.

• Looping in /out.

• Suits Aluminium or Copperconductors.

• Armour termination kit available.

WT Henley Church Manorway, Belvedere, Erith, Kent DA8 1EX ENGLANDA Division of Sicame UK LimitedTelephone: +44 (0) 1322 444500 - Facsimile: +44 (0) 1322 444502 - Email: sales@wt-henley.com - Website: www.sicameuk.co.uk

Registered office: Church Manorway, Erith, Kent DA8 1EX United Kingdom - Registration No 3319466 VAT Registration No GB 683822508

• Slim-line compact designs – ideal formodern lighting columns and otherstreet furniture with space restrictionswhere internal space is restricted.

• Fuse carriers accept offset tag typefuselinks to BS 88 Pt1/IEC 269-1.

• Both single and double pole isolationavailable.

• Kit available to enable use of 3-phasesupplies.

• CNE or SNE versions.

14688 Street Lighting cutouts-NEW:Layout 1 7/2/14 10:41 Page 1

Low force lever release style

Overall Dimensions

Height: 150mm

Width: 67mm

Projection: 49mm

Wiring Facilities

Basic Cutout accepts single phase cables only.

Terminals suitable for terminating up to 25mm²Solid Aluminium or stranded Copper conductors.

To use with 3 phase cables

This requires additional loop in connectors andterminal shrouds. For each cutout it is necessaryto use 4 loop-in connectors plus 4 shrouds.

Loop in/out Connector Terminals

Incoming – Loop in/out up to 35mm² aluminiumor copper conductors.

Outgoing – two ways for up to 16mm² StrandedCopper.

For armoured cables up to 16mm² 4-core

An armour bond kit is available, comprising: -clamp, ferrules, lead-strips and fixing screws.Suitable for loop in/out cables.

Original style

Overall Dimensions

Height: 145.5mm

Width: 73.9mm

Projection: 56.9mm

Wiring Facilities

Basic Cutout accepts single phase cables only.

Terminals suitable for terminating up to 25mm²Solid Aluminium or 16mm² stranded Copperconductors.

To use with 3 phase cables

This requires additional loop in connectors andterminal shrouds. For each cutout it is necessaryto use 4 loop-in connectors plus 4 shrouds.

Loop in/out Connector Terminals

Incoming – Loop in/out up to 35mm² aluminiumor copper conductors.

Outgoing – two ways for up to 16mm² StrandedCopper.

For armoured cables up to 16mm² 4-core

An armour bond kit is available, comprising: -clamp, ferrules, lead-strips and fixing screws.Suitable for loop in/out cables.

Low Force Lever Release model

Low Force Lever Release modelwith clear cover

Original model

General Note: The equipment in this publication should be installed by a suitably qualified person. Sicame UK Limited reserves theright to make changes in product specification without notice or liability. All information is subject to Sicame UK’s own data and isconsidered accurate at time this document was created.

© 2014 Sicame UK Limited. All rights reserved. No part of this document may be copied or reproduced in whole or in part without prior writtenapproval of Sicame UK Limited.

8219 2012-01-25

UUnnddeerrggrroouunndd DDiissttrriibbuuttiioonn

Fuse Service Equipment

Product data

14688 Street Lighting cutouts-NEW:Layout 1 7/2/14 10:41 Page 2