Exor new product presentation 2006

Enhancing the power of theGalil Motion Controller using

Exor UniOP HMIsApril 2006April 2006

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Enhancing the power of the Galil Controller

Start with a great motion controller

1. Add HMI with built-in gateway to allow the Galil to intelligently communicate with other hardware as a system with 175+ drivers.

2 . Data acquisition with UniNET and OPC Server.

3. Expand the Galil I/O by adding 16 in and 16 out to HMI.

4. Add a PLC/embedded logic controller to enhance the power of the Galil Motion Controller.

5. Many choices of hardware configurations, 60+. A solution that will fit your need and cost requirements.

6. Windows CE.NET 4.2TM as an optional operating system.

7. Multi-language support including Asian characters.

8. Optimized hardware for high volume applications.ELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

www.electromate.comsales@electromate.com

Sold & Serviced By:

Enhancing Communication and Connectivity

Sold & Serviced By:

Connect Galil to these other controllers for intelligent communications

Sold & Serviced By:

Free Gateway functionality

Dual Driver Communications plus data acquisition

UniOP Panel PC Port

PLC Port

Aux Port

Controller

Communication

Module SCM11

Ethernet TC

Client Application

UniNet OPCServer

Ethernet interface

175 X 175 = 30,625 combinations

“give or take a few”

Sold & Serviced By:

Collect Production Data with UniNET and OPC

UniOP can act as a data concentrator for many brands and different types of controls. You can work with a single protocol, our free OPC Server.

UniNET on Ethernet

Sold & Serviced By:

Sharing information with UniNETUniOP can act as a data concentrator for multiple HMIs to a single controller.

UniNET serially or on Ethernet

Sold & Serviced By:

Modularity at the Roots

Display Subsystem, Touch/Keypad

Power Supply System Interfaces

CPU Subsystem Communication

Interfaces

Modular architecture• Products are built upon common subsystems• Faster time to market for new models• Optimization of the manufacturing flow

Sold & Serviced By:

Modular Communication Architecture

All UniOP models can accept one optional TCM/SCM communication module.

TCM/SCM modules and protocols are compatible with the complete range of products

Easy access from rear of units

Sold & Serviced By:

Communication Modules

Simatic S7 MPI

Interbus

Profibus DP 12 Mb

DeviceNet

CANopen

Ethernet

Profibus DP 1.5 Mb

LonWorks

Compatible with allUniOP models!

... and more

Sold & Serviced By:

The Ethernet Modules

TCM10Ethernet 10baseT

10 Mbit

UDP/IP protocol

Supports UniNET

Can be used for Ethernet based protocols

SCM11Ethernet 10baseT10 MbitTCP/IP and UDP/IP protocolsSupports UniNETCan be used for Ethernet based protocolsIncludes PLC functionality

Sold & Serviced By:

UniOP Brings the Web to the Factory Floor

The SCM10 Web Enabled Smart Controller

• Plug-in interface for control applications• Compatible with all UniOP products• Web-enables UniOP panels• Includes 10base-T Ethernet

• Remote monitoring and controlling• Home surveillance• Remote access to legacy control applications• Exporting local data to the Web

Sold & Serviced By:

Dual Driver Communications

This is how easy it is to set up…

Sold & Serviced By:

Panel setup for Dual Driver

Sold & Serviced By:

Pick your protocols and set up communications

Sold & Serviced By:

Insert a Data Transfer Job

Sold & Serviced By:

UniNET & OPC Server

This is how easy it is to set up…

Sold & Serviced By:

OPC “Laptop” Setup

Sold & Serviced By:

“OPC Server” Setup

Sold & Serviced By:

OPC “UniOP” Setup

Sold & Serviced By:

Done! Live Excel Data Update

Sold & Serviced By:

Put control in your HMI “HMIcontrol”

Sold & Serviced By:

Add Control to any UniOP

PLC Coprocessor Module: high performance control without loading the HMI CPU

Local I/O modules

Fieldbus interfaces for remote I/O. The easiest way to distribute the control system

Compatible with all UniOP panels

Adds full IEC61131-3 programming capability to UniOP

Sold & Serviced By:

Add Control Capability to UniOP

Just plug a control module and an I/O module into the HMI to make it a true HMIcontrol system

Sold & Serviced By:

Local Integrated I/O

Local inputs/outputs

A number of input and outputs, digital and/or analog and/or high speed pulse inputs can be integrated directly in the UniOP panels. Examples: UIM03 (32 I/O) or UIM05 (44 I/O) internal I/O boards. ELECTROMATE

Sold & Serviced By:

Remote Fieldbus I/O

Remote inputs and outputs

A fieldbus connection can be used to control the remote I/O. The fieldbus interface is integrated in the SCM PLC module.

Sold & Serviced By:

Local and Remote I/O

You can have both.

Sold & Serviced By:

Connectivity and Local and Remote I/O

This allows for distributed control architectures.This connection does not interfere with embedded PLC performance.

Connection to external

PLC or Controller

Sold & Serviced By:

The SCM03-C / SCM03 PLC Module

Compatible with all UniOP panels

High-performance 32 bit MIPS CPU (IDT 3041, 25 MHz clock, 2.5 KB cache)

Up to 2 M x 16 bit Flash EPROM

Downloadable firmware

Up to 4 M x 16 bit SDRAM

512 bytes EEPROM for system parameters

Optically-isolated RS-485 or CAN interface; interface to the Aux Port

15000 gate FPGA for logic system services including communication coprocessors

CAN master interface

Supports either CoDeSys or ISaGRAF

Sold & Serviced By:

Local I/O Boards

16 digital inputs 24V16 relay outputs 1AOptical insulation

20 digital inputs 24V12 digital outputs 0.5A4-8 programmable analog inputs4 programmable analog outputs1 RTD input

Use some of the digital inputs for 4 channels of quadrature high speed pulse input at 1MHz.

Sold & Serviced By:

HMIcontrol with CoDeSys

High-performance control solutions for UniOP

Full IEC 61131-3 with five programming languages

Native compiler for high speed run-time execution

Requires SCM03-C or SCM11-C

140 Companies have chosen to use CoDeSys as their development software

Sold & Serviced By:

Software Designed for Simplicity

• One Windows-based software programs all the models

• The easiest to use software• State-of-the-Art interface and

technology• Pixel and vector graphics with High

Colors support (64,000 colors)• Ethernet communication• Dual-driver communication• Tag dictionary• Export/Import tag information• Far East language support• Export/Import text information• Video input

Sold & Serviced By:

The UniOP Designer 6

Sold & Serviced By:

Support vector graphics with pixel level alignment.

Complete symbol library

User-defined object library

64,000 color support (16 bit)

Touchscreen programming with pixel level alignment

Sold & Serviced By:

Tag Dictionary with import capability

Easy conversion of applications between different controllers

Sold & Serviced By:

Import/export text tags for multi-language

Supports UniCode and Far East font scripts

Sold & Serviced By:

Many Exor UniOP Hardware Choices

Sold & Serviced By:

Exor UniOP in the Real World

Sold & Serviced By:

Custom embeddedsolutions

Industrial Monitors & Computers

The UniOP Product Range

Scalability and performancein a large family of compatible products

3.8”

15.1”

Sold & Serviced By:

Basic Product Environmental Ratings

Environmental Specifications

Operating temperature

0 to 50 C for text 0 to 45 C for touchscreen -20 to 60 C available as option for select models

Storage temperature -20 to +70 C Operating and storage humidity 5 to 85% non condensing

Protection class IP65 / NEMA4X Vibration IEC 68-2-6

Shock IEC 68-2-27 Keyboard reliability > 3 millions operation

Touchscreen reliability > 1 million operations

Sold & Serviced By:

The Quality System of Sitek S.p.A. conforms to

UNI EN ISO 9001 - 2000

CEEN50081-2 and EN 50082-2 for installation in industrial and residential environments

UL / cULUL1950UL508Class I Div II (Hazardous Locations)

Sold & Serviced By:

120x32 semi-graphical display

Downloadable fonts, scalable text

IP65 / NEMA 4X front panel protection

Function keys with slide-in legends & Programmable LEDs

Battery backed Real Time Clock and Recipes on ePAD 03/05

ePAD 03/05 Dual-driver capability with option card

Available with –20 to 60 degress C spec.

Compatible with HMIcontrol and fieldbusI/O.

The lowest-cost Ethernet compatible operator panels, some with a full numeric keypad

ePAD03, ePAD04, ePAD05, ePAD06

Sold & Serviced By:

eTOP02, eTOP03

3.5” 1/4 VGA (320x240 pixel) TFT color graphical display3.8” 1/4 VGA (320x240 pixel) monochrome graphical displayAnalog resistive touch screen Long-life white LED backlightMultilanguage project capabilityBattery backed Real Time Clock and RecipesDual-driver capability with option cardIP65 / NEMA 4X front panel protectionCompatible with HMIcontrol and fieldbus I/O.The lowest-cost Ethernet compatible color touchscreen

Sold & Serviced By:

CP10G-04

4 lines by 20 characters120x32 pixel monochrome LCD graphical displayScalable fonts Battery backed Real Time Clock and Recipes512 KB Flash memory12 user function keys with slide-in legends12 user defined LEDsDual-driver capabilityCompatible with HMIcontrol, local I/O and fieldbus I/O.

Sold & Serviced By:

ePALM10

3 Position “dead-man / live man”switch to meet new robotic standard.

120x32 graphical display, up to 8 lines by 20 characters.

Includes hard wired Emergency Stop button.

IP65 front panel protection

Highly visible transflective LCD display.

27 key keypad with tactile feedback

Scalable text, Downloadable fonts.

Connection to industrial bus systems

Large memory, 512KB Flash

Serial, support for DeviceNet, CANopen and Profibus DP at 1.5MB, and HMIcontrol

Sold & Serviced By:

High Speed ePALM Products

The increased interest in handheld solutions has generated the need of solutions using fieldbus and Ethernet

ePALM10 for Profibus DP

Network speed up to 12 Mb

Can be used only as terminal node

ePALM10 for Ethernet

Compatible with TCM10 and SCM11

Firmware supports Ethernet connectivity

Sold & Serviced By:

eTOP05/eTOP12, small touch screen

5.6” 1/4 VGA (320x 240 pixel) monochrome graphical displayAnalog resistive touch screenLong-life white LED backlight (eTOP05)Connection to various fieldbus and Ethernet systems with plug-in modules32MB Flash memory on removable mediaIP65 / NEMA 4X front panel protectionCompatible with HMIcontrol and fieldbus I/O.Programs with Designer software as old as 5.08

Sold & Serviced By:

eTOP11, small color touch screen

5.6” 1/4 VGA (320x 240 pixel) STN, 16 color graphical display

Analog resistive touch screen

CCFL backlight

Connection to various fieldbus and Ethernet systems with plug-in modules

32MB Flash memory on removable media

Compatible with HMIcontrol, local I/O and fieldbus I/O.

Sold & Serviced By:

The B Generation, faster and more powerful

200 MHz, 64 bit MIPS processor

64,000 / 16 bit colors are supported in all TFT displays. Supports all imported images. Photorealistic images are stunning.

Video Input Module support - Display up to four independent and simultaneous images (video cameras and/or a computer) using the optional external VMO10 video input module. Images can be easilyresized and cropped.

TFT models support backlight dimming. Reduce the brightness of the screen for better readability and user comfort. The brightness can be reduced by a factor of about 50.

32MB of internal, non-removable, panel flash memory. Panel Memory will contain everything currently included in the SSFDC card. Increase the reliability of the panel when working in harsh environments. Hardware still includes a Flash Card Socket for optional 32 MB flash cardUpdate application and firmware in much the same way as current product. Removable Flash Card will no longer be part of the standard hardware.

Sold & Serviced By:

eTOP10B, small color touch screen

5.6” 1/4 VGA (320x 240 pixel) TFT, 64,000 color graphical display

CCFL backlight

32MB Flash memory

Compatible with HMIcontrol, local I/O and Fieldbus I/O.

Supports Video Input Module

Sold & Serviced By:

eTOP20B, larger touch screen

7.5” TFT 64,000 color display with VGA (640x480 pixels) resolution.

CCFL backlight

32MB Flash memory

Compatible with HMIcontroland Fieldbus I/O

Sold & Serviced By:

eTOP33B, the standard size for touch screens

10.4” TFT color display with VGA (640x480 pixels) resolution.

450 cd/m2 brightness

CCFL backlight

32MB Flash memory

Compatible with HMIcontrol, Local I/O and Fieldbus I/O

Sold & Serviced By:

eTOP40B & eTOP50B, Large and very large touch screens

12.1 TFT (800x600) and 15.1”TFT (1024x768) color displays.

CCFL backlight

32MB Flash memory

Compatible with HMIcontroland Fieldbus I/O

Sold & Serviced By:

ePAD33B, ePAD33B-T, ePAD32B

10.4” TFT color display with VGA (640x480 pixels) resolution.

Available with touch screen option

Connection to industrial bus systems and Ethernet (otional plug-in modules)

Compatible with HMIcontrol and local I/O subsystems

Large memory size (8MB Flash) with removable media

IP65 front panel protection

Sold & Serviced By:

eSOP39, eTOP39B Hi-Bright / Ultra Hardened

10.4” VGA (640x480 pixels) resolution

Advance Transflective color display for sunlight readability

NFI (Near Field Imaging) touch screen (ultra-hardened)

Extended temperature range 55 degrees C (ultra-hardened)

Connection to fieldbus and Ethernet systems

Compatible with HMIcontrol, local I/O and fieldbus remote I/O

Available with Windows CEELECTROMATE

Sold & Serviced By:

eSOP39

Unique Hardware Configuration, special order

Sold & Serviced By:

eTOP19B, Hi-Bright

5.6” TFT color display with ¼VGA (320x240 pixles) resolution

32MB Flash memory

Compatible with HMIcontrol, local I/O and Fieldbus I/O.

Sold & Serviced By:

The Video Input Option

Ideal for: Diagnostic and surveillance in building automation, home automation, maritime applications

Works with:

eTOP10B

eTOP19B

eTOP20B

eTOP33B

eTOP39B

eTOP40B

eTOP50B

ePAD33B

ePAD33B-T

PHILIPS

Sold & Serviced By:

UniOP Dual-Module Option

Allows using two TCM / SCM modules in one panel

Available on T2000 or later versions

Available for special orders

Sold & Serviced By:

Ready for OPEN Systems

The same rugged UniOP hardware can be used to run the most popular open operating systems for industrial applications

- Windows CE.NET 4.2TM

- Built in USB Port

- Built in Ethernet Port,

option for second one

Sold & Serviced By:

eTOP105

The lowest cost UniOP workstation for Windows CE. The eTOP105 matches the performance of our other Windows CE workstations.

It is the same 5.6" display used in the eTOP05.

The system includes Windows CE.NET 4.2TM

Sold & Serviced By:

eXPAC ™ a product from the UniOPEN product development group

Sold & Serviced By:

eXPAC ™ - EXOR Programmable Automation Controller

eXcellent I/O Mix and Connectivity(16) 24 VDC Digital Inputs(1) 24 VDC Digital and (16) 3A @ 120 VAC Relay Outputs(4) 12-bit Analog Inputs and (4) 12-bit Analog Outputs(1) Flow sensor or high speed counter input(1) Expansion module slot for up to 16 additional Digital or 8 additional Analog I/O points(1) CANopen port and (1) Ethernet port(3) Serial ports with support for all 185+ UniOP device drivers plus modem connectivity High Speed communications via, CANopen, MODBUS TCP/IP, and others.

eXcellent Power and Flexibility• IEC 61131-3 Programming with CoDeSys or ISaGRAF• HMI Programmed with Designer Software• Web Enabled remote access with embedded web server• Wireless Internet connectivity via cell phone GPRS• 5.6” color or monochrome, ¼ VGA graphical touch screen• 16MB Flash for HMI/PLC program, 128MB Flash for Data Logging• 120x32 pixel / 4 line x 20 character graphical text display• Private Labeling required, 50 piece minimum, one time artwork fee

List: $1,495 (mono)List: $1,195

HMI + PLC + Combo I/O+ WebServer + Ethernet+ CANopen + Gateway

+ Wireless Internet+data logging

+ more…

Sold & Serviced By:

Wireless Internet Access

Sold & Serviced By:

Expanded “campus style” Wireless Internet Access

Sold & Serviced By:

UniOPEN

Sold & Serviced By:

UniOPEN - - - What is possible?

Customer needed a very small HMI with integrated PLC, 32 I/O and one servo axis control in a 1/16 DIN housing…

We resolved the problem by applying the UniOPEN standard components into a semi-custom solution that exactly fit the customers requirements.

Sold & Serviced By:

UniOPEN - - - What is possible?

Standard Solution UniOPEN Solutionvs.

PLCw/I/O

ServoMotion

FieldBus

UniOPEN

FieldBus

20 Heads per machine for a total savings of $10,000

per machine

$1400+ $900vs.ELECTROMATE

Sold & Serviced By:

Enhancing the power of the Galil Controller

1 . Add built-in gateway to allow the Galil to intelligently communicate with other hardware as a system with 175+ drivers.

2 . Data acquisition with UniNET and OPC Server.

3. Expand the Galil I/O by adding 16 in and 16 out to HMI.

4. Add a PLC/embedded logic controller to enhance the power of the Galil Motion Controller.

5. Many choices of hardware configurations, 60+. A solution that will fit your need and cost requirements.

6. Windows CE.NET 4.2TM as an optional operating system.

7. Multi-language support including Asian characters.

8. Optimized hardware for high volume applications.ELECTROMATE

Sold & Serviced By:

Thank you!

Sold & Serviced By:

Exor new product presentation 2006

Technology

Exor new product presentation 2006

Universally Testable AND-EXOR Networks

Product Catalogue Documents/Exor/Exor Catalog... · Software development has always been an important part of the offering from EXOR and being a company that controls hardware, software

Product Catalog - AMMC Documents/Exor...Product Catalog To Our Valued Customers, DataVisor Marquees is a leader in quality marquee solutions meeting the demand for cost effective and

Exor epc 1550_Spec Sheet

Lecture Routing ExOR

Scalable innovative platform microSOM from Exor embedded ... · Development tool standard SOM supplier Product pre-compliance certification Programming Framework IP library Why Exor

EXOR Maintenance Manager Inspection Loader · EXOR MAINTENANCE MANAGER INSPECTION LOADER BULK LOADING INSPECTIONS Version: 4.7 1 CONFIDENTIALITY STATEMENT The contents of this document,

Exor marquee catalog

Exor Corporation Limited - Bentley · Exor Corporation Limited ... Manual Name: Document Manager Admin Guide Reviewed by: Version: ... PC and Document Location (WebUtil)

JSmart700 Series - EXOR INT

Exor PLC+HMI Development Kit User Manual

Synthesis of Linear Reversible Circuits and EXOR-AND-based

Exor Deutschland Gesamtkatalog

What’s new in Bentley Exor INTRODUCTION 3 CORE CHANGES

Exor PLC+HMI Development Kit User ManualFile/Exor-EvaluationKit-UserManual-v1.6.… · 3.3.2 Creating the SDK (optional) ... Exor PLC+HMI Development Kit User Manual UM0012 (v1.6)

ExOR: Opportunistic Multi-Hop Routing for Wireless Networks

Exor Group Ltd Company Presentation

Exor Managed Service - Bentley · This document explains how to connect and log into Exor Managed Service ... Please note that when running ‘Highways by Exor’ for the first time

Presentation of Cushman and Wakefield takeover by IFIL - EXOR