View
262
Download
1
Category
Tags:
Preview:
Citation preview
Administering Oxygen
By: Olivia JesterTechnical Writing and Communication
April 29th, 2013
Administering oxygen properly is very important and can be the difference of life or death for a patient. In order to ensure for proper use please follow the following steps carefully,
Step 1:BSI!!! Body substance isolation,is the most important and very first step in any procedure when dealing with an patient. This includes gloves, mask , and or a gown in some cases along with making sure the scene is safe.
Administering Oxygen
Step 2::Gently Crack the oxygen tank to relieve any dust or debris that could be within the flow of air.
Administering Oxygen
Step 4::Align the flow liter up to the oxygen tank to make sure for an secure and tight fit by tightening the "T" handle.
Administering Oxygen
Step 5:Open the tank assuring for proper pressure ( 2000 PSI) During this period you should also be aware of your surroundings by listening or observing for any leaks.
Administering Oxygen
Step 6:Open up the nonrebreather and connect the oxygen delivery tubing to the low pressure side or flow meter side.
Administering Oxygen
Step 7:Turn the oxygen tank on to fifteen liters ensuring that the reservoir inflates. If this process is taking a little longer than usual simply cover the valve with your finger to quicken the process.
Administering Oxygen
Step 8:Explain to your patient the events happening then continue to place the mask with the string behind their head and pinch the alumni strip to ensure an seal.
Administering Oxygen
Recommended