View
2
Download
0
Category
Preview:
Citation preview
Your helpful guide to ensure you choose the correct pad for the right job.Keeping floors clean is more than simply cleaning off dust, dirt and spillage. It’s also about making sure it keeps the look and shine it deserves, with less likelihood of scuffs, black marks, stains and scratches.
We have created this guide to help you choose which floor pad should be used depending on the floor type.
Whether you need to strip, clean or polish your flooring, you can rely on our floor pads to work faster, harder, for longer at a total lower cost.
Floor pads are colour coded for easy identification and usable on both sides. Open web construction enables easier dirt pick-up and permits faster cleaning of pads under running water.
Jangro floor pads come in a variety of sizes and various abrasians to help you achieve the best possible results for your floors. Pad sizes are from 10” to 21”.
Choosing the correct floor pad
Black Floor Pad
Use for wet cleaningof old soiled floor finishesor heavy duty cleaning.
Brown Floor Pad
Ideal for dry strippingof protected floors or wetstripping with any conventional stripping solution. Can also be used with an automatic scrubber-drier to maintain heavily solied industrial floors.
Green Floor Pad
Use for daily scrubbing ofunprotected hard floors.Also suitable for preparinghard floors and for strippingsoft floors.
Blue Floor Pad
Use wet for regular maintenance of unprotected floors. Recommended for dry stripping soft floors; also suitable for dry scrubbing ofheavily soiled floors and spraycleaning medium soiled floors.
Red Floor Pad
The choice for routine spraycleaning on protected floors;cleans when damp, buffswhen dry. Also suitable forlight scrubbing.
White Floor Pad
Dry polishing and buffing ofunprotected floors with standard speed rotary floor machines, or for light spray cleaning protected floors.
Trizact™Diamond HXDiscs
Used to restore and bring back the natural beauty of stone floors, simply by using standard floor cleaning equipment.It is faster than a traditional diamond grind and allows you to refurbish your own floors without the need for specialists.
Scotch-Brite™SurfacePreparation Pad
Premium floor stripping pad that strips and prepares a wide variety of floors, using just a neutral detergent or water. It removes stains and visible scratches as well as tackling hard-to-clean floors with a deeper clean than a black pad, without the harshness or scratches.
Scotch-Brite™Purple HighShine Floor Pad
High performance, double-sided floor pad ideal for floors with medium shine in good condition. Cleans and polishes floors to a brilliant gloss finish without the use of chemicals.
Scotch-Brite™Sienna HighShine Floor Pad
High performance, double-sided floor pad ideal for worn and dull floors in poor initial condition. Cleans and polishes to a medium shine withoutthe use of chemicals.
Choosing the correct floor pad Note: Where there are multiple options given, pads are shown in order of preference from the left
Rough
Shiny
→ →3 Step Process
→ →3 Step Process
→ →3 Step Process
Protected byfloor manufacturer
Protected byacrylic
Protected byfloor manufacturer
Protected byacrylic
→ →3 Step Process
→ →3 Step Process
→ →3 Step Process
PROCESS: Buffing Burnishing Spray CleaningSpray Buffing
Spray CleaningSpray Buffing Cleaning Deep Cleaning
Stripping (protection removal)
Renovation
Type of Machine Swing Machine Burnisher Swing Machine Burnisher Scrubber Dryer Swing Machine Scrubber Dryer/Swing Machine
Scrubber Dryer/Swing Machine
Conditions Dry Dry Spray Spray Wet Wet Wet Wet
Speed 150-400 400-3000 150-400 400-1200 150-400 150-400 150-400 150-400
Frequency Daily or less Daily or less Daily or less Daily or less Daily or less Spot operation Spot operation Spot operation
TYPE OF FLOOR
Wood (Oiled)
Wood (Varnished)
Concrete (Polished)
Concrete (Rough)
Granite
PVC/VCT Vinyl (Protected)
PVC (Unprotected)
VCT Vinyl (unprotected)
Linoleum
Rubber
Ceramic, Dull
Ceramic, High Gloss (Glazed)
Marble/Terazzo, Dull, (unprotected)
Marble/Terazzo, Shiny (unprotected)
Marble/Terazzo, Shiny, Cristallised
Marble/Terazzo, Shiny, Protected → →
3 Step Process
Recommended