View
225
Download
1
Category
Preview:
Citation preview
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
Wire Preparation Equipment
ENHANCE YOUR WIRE PROCESSING EFFICIENCY
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 2
WIRE PREPARATION EQUIPMENT
Application Tooling and Equipment PortfolioEnabling our customers to make the wire preparation
process as effective as possible, TE Connectivity (TE)
provides you with high-performance and operator
friendly equipment. Due to the enhanced, innovative
technique, high and precise production solutions can
be achieved.
Our tooling portfolio covers almost all processing
requirements. We offer processing solutions for both
standard, as well as the specialized stripping and
cutting challenges of demanding insulation materials.
You can draw from a full range of add-on modules
to allow your system to grow right along with your
requirements for optimum flexibility and reliable
process control!
Your local representative will be happy to advise on
equipment that meets your production challenges.
PAGE 3TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
Table of Contents Page
Cutting Machines
• Iota 330 4
Stripping Machines
• Cosmic 32M and Cosmic 32M CDD 5
• AT-FE 0400 Stripping Machine 6
• MIRA 230 7
• Cosmic 927R, Cosmic 927RX
and Cosmic 927RX-W 8
Jacket Stripping Machines
• Cosmic 60R, Cosmic 60R-W and
Cosmic 60R-L 9
Coaxial Wire Stripping Machine
• Cosmic 42R Coaxial Stripping Machine 10
• Cosmic 48R and Cosmic 48RX 11
Cutting and Stripping Machines
• Kappa 310 12
• Kappa 315 12
• Kappa 320 13
• Kappa 322 13
• Kappa 330 14
• Kappa 331 U/Coax 14
• Kappa 350 15
Kappa Cutting and Stripping Machines 16 Application Samples/Overview 18
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 4
Iota 330 Wire Cutting MachineProduct Features
• Ease of operation
• 5 Hard keys for main functions combined
with touch panel
• For broad variety of materials
• For diameter up to 16 mm
• For width up to 82 mm
• High productivity parallel processing
of up to 4 products
• Precise and smooth handling of product
• Cutting blade shut height precisely adjusted to
product dimensions
• Adjustable contact pressure
• Monitored length measuring as an option
WIRE PREPARATION EQUIPMENT
Wire cross section 0.13 – 35 mm2 (AWG 26 – AWG 2)
Insulation diameter16 mm (.63 in) max. 25 mm (.98 in) in the center of the belt drive unit
Flat ribbon cable dimensions max. width 82 mm (3.23 in)
Feed speed 1.7 m/sec
Noise level < 70 dB
Electrical supply 115/230 V +/- 10 %, 50/60 Hz, 230 VA
Compressed air supply 4 – 6 bar
Interfaces 2 x IOCS, 1 x Encoder Out, 1 x Ethernet
Weight app. 38 kg (84 lb)
Machine Dimensions (W x H x D) 510 x 385 x 525 mm (21 x 16 x 21 in)
Technical Data
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
* EMEA only
PAGE 5TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
Cosmic 32M and Cosmic 32M CDD with Integrated Quality Check Faster, more precise and more powerful.
The Cosmic 32M is a high-speed electric wire stripper.
Achieving higher precision, more power, and a wider
AWG range, all in quicker cycle time than its prede-
cessor. It is equipped with digital stripping diameter
display and sensitive wire-tip touch sensor.
The Cosmic 32M CDD machine is equipped in addition
with a conductor damage detector that checks for
conductor damage.
Product Features
• Operates anywhere in the world with
AC 100 V – 240 V compatibility
• Digitally displays stripping diameter
• Easily switches full / partial strip
• 0.3 s quick cycle time
• Wide strip range of AWG 12 – 32
• Compact, easy-to-handle benchtop model
Technical Data
ApplicationDiscrete wires Stranded wires Inner conductors of multicore wires
Cross. section area 0.03 – 3.3 mm2 (AWG 32 – 12)
Max. insulation diameter 0.6 – 4 mm (0.02 – 0.16 in)
Stripping length 1 – 25 mm (0.04 – 1 in)
Pull off length 2 – 25 mm (0.08 – 1 in)
Form and Number of blades V-blades
Min. free length of cable JacketL + stripping length L depends on gripper type:Standard: L = 14 mm (0.6 in), Thin: L = 7 mm (0.3 in)
Weight 4.5 kg (10 pounds)
Machine Dimensions (L x W x H) 77 x 175 x 348 mm (25.5 x 29.5 x 16.7 in)
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 6
AT-FE 0400 Stripping Machine The strip box is an electric driven machine to strip
standard PVC (polyvinylchlorid) wires up to an outside
diameter of 4.2 mm.
Due to the low weight the AT-FE 0400 machine can be
placed on nearly every workplace and only requires an
electrical suppy.
Product Features
• Electrically driven
• Simple adjustment
• Easy handling
• Stepping switch for manual operation
• Small space required practically maintenance-free
• Cuts cleanly through the insulation due to the design
of 4 special cutting blades
• Manual adjustment for wire size and stripping length
Technical Data
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
WIRE PREPARATION EQUIPMENT
ApplicationDiscrete wires Stranded wires Inner conductors of multicore wires
Cross. section area0.25 – 2.5 mm2 (AWG 22 – 14)Optional 0.05 – 0.14 mm2 (AWG 30 – 26)
Max. insulation diameter – 4.2 mm (– 0.17 in)
Stripping length 1.5 – 10 mm (0.06 – 0.39 in)
Pull off length continuously adjustable
Form and Number of blades 4 blade system
Min. free length of cable Jacket12.5 mm + stripping length(0.49 in + stripping length)
Weight 6.7 kg (14.77 pounds)
Machine Dimensions (L x W x H) 340 x 150 x 170 mm (13.38 x 5.9 x 6.69 in)
* EMEA only
PAGE 7TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
Application
Discrete wires Stranded wires Inner conductors of multicore wiresSequence processing
Cross. section area 0.03 mm² - 8 mm² (AWG 32 - 8)
Max. insulation diameter 6.5 mm (0.256 in)
Stripping length 1.5 to 46 mm (0.06–1.81 in)
Max. wire cross section for cutting 2 mm² / AWG 14 / ø 1.6 mm (ø0.063 in)
Pull off length 0.01 – 46 mm (0.0004–1.81 in)
Form and Number of blades V-Blades, 2
Min. insertion depth with standard grippers 11 mm (0.43 in)
Weight 11kg (24 lb)
Machine Dimensions (WxHxD) 141 x 290 x 473 mm (5.5 × 11.4 × 18.6 in)
Machine Dimensions (L x W x H) 340 x 150 x 170 mm (13.38 x 5.9 x 6.69 in)
MIRA 230 Machine for multi-conductor processing
Largest processing range in its class• Sturdily built to accommodate high cutting and
stripping forces
• Large processing range up to 8 mm2/AWG 8
• Unique scope of functions, including sequence
processing
Maximum productivity
• Multi-conductor processing in a single pass
• Fast access to frequently used functions
• Function to call up stored articles for production
Reproducible quality
• Production based on verified data stored in the
library
• Password-protected access to the settings
• Integrated air jet for automatic blade cleaning
Technical Data
Smart design
• Smartphone-like navigation for quick learning
progress
• Ergonomic design to optimize work position
• Helpful controls for fast, easy entry of parameter
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 8
Cosmic 927R, Cosmic 927RX and Cosmic 927RX-WL
Rotary Wire Stripping Machines Ultramodern technology has been developed into a precision micro-cable stripping machine
The Cosmic 927R machine was designed and
developed to reliably strip various insulation materials
and micro-cable.
From conductor diameter AWG 36 to 10 (0.11 mm to
3.5 mm), the stripping diameter display can be set to
within 0.1 mm increments.
The Cosmic 927RX shares the features of the Cosmic
927R but is recommended for hard to strip insulations.
The Cosmic 927RX-WL shares the features of the
Cosmic 927R but is recommended for longer stripping
length up to 100 mm.
Technical Data
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
ApplicationCosmic 927R Discrete wiresJacket of multicore wires
Cosmic 927RXFor thin and hard-tostripwires, can apply a higherstripping force
Cosmic 927RX-WLStripping length up to100 mm
Cross. section area 0.013 – 6 (AWG 36 – 10)
Max. insulation diameter 0.25 – 5.3 mm (0.01 – 02 in)
Stripping length 1 – 25 mm (0.04 – 1 in) in)1.5 – 100 mm (0.06 – 3.9 in)
Pull off length 2 – 25 (0.8 – 1 in)
Form and Number of blades
2 carbiderotating blades
4 tool steel rotatingblades, optional carbide blades
2 carbiderotating blades
Machine Dimensions (L x W x H)
241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)
241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)
241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)
Minimal insert length L(Multi-wire cables with outside diameter < 7,5 mm/0,3 in.
L + stripping lengthL depends on gripper type: Standard: x = 12 mm/0.5 in,
Thin: x = 10 mm/0.4 in.Thin+flat: x = 7 mm/0.28 in
Weight 8.4 kg (18.5 pounds
Machine DimensionsL x W x H
131 x 218 x 400 mm (5.16 x 8.6 x 15.75 in)
Product Features
• For most wire types, optimized to maximize
stripping quality
• Can be selected to twist with clockwise/counter-
clockwise or non-twist
• Power supply: 100 – 240 V AC
• Digital display for wire diameter
• Can be set to a wide variety of functions
• Compact, lightweight, benchtop
WIRE PREPARATION EQUIPMENT
PAGE 9TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
Cosmic 60R, Cosmic 60R-W and Cosmic 60R-L Rotary Jacket Stripping Machines Patented rotary 4-blade system, for larger diameter multi-conductor cable The Cosmic 60R is designed for jacket stripping of
multi-conductor or single cable. Its patented rotary
4-blade system can strip various insulation material
cables without changing the blades. It comes equip-
ped with a digital display for setting the wire or cable
diameters.
Product Features
• It is possible to strip different wire sizes without the
need to change the stripping blades
• Easy to adjust the cutting diameter by micrometer
dial
• Digital display for stripping diameter selection
• Easy to select full or partial strip
• Powered by electricity only
• Optimal cutting performed by rotary blade system
Technical Data
Application
Cosmic 60R Discrete wires, jacket of multi-core wiresHard and tough insulation materialBraided or textile layers
Cosmic 60R-WDiscrete wires, jacket of multi-core wiresHard and tough insulation materialBraided or textile layers
Cosmic 60R-LDiscrete wires, jacket of multi-core wiresHard and tough insulation materialBraided or textile layers
Max. insulation diameter 2.5 – 10 mm (0.1 – 0.4 in) 11 – 18 mm (0.43 – 0.7 in) 2.5 – 10 mm (0.1 – 0.4 in)
Stripping length 3 – 90 mm (0.43 – 0.7 in) 3 – 90 mm (0.43 – 0.7 in) 3 – 200 (0.43 – 7.9 in)
Form and Number of blades
4-blade rotary system 4-blade rotary system 4-blade rotary system
Weight 20 kg (44 pounds) 20 kg (44 pounds) 20 kg (44 pounds)
Machine Dimensions (L x W x H)
241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)
241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)
241 x 230 x 640 mm(9.5 x 9.1 x 25.2 in)
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 10
Cosmic 42R Coaxial Stripping MachineThe Cosmic 42R is a developed cable stripper for
ultra-micro coaxial cables. This precision machine is
made through state-of-the-art engineering and will
be the perfect fit in your operation.
Function
The Cosmic 42R bench top machine is equipped with
a waste vacuum cleaning system to achieve proper
removal of slugs. With its three blade rotating head
it performs a precise centered cutting and stripping
function. The centralizer pressure is adjustable to avoid
unwanted twist and/or deformation.
All parameters required for coax stripping: stripping
length, incision diameter, wayback, pull-back speed,
etc. are display on a large LCD screen for speedier
setups. The unit allows for up to 1.000 different data
sets to be stored which can be recalled quickly and
easily.
Product Features
• Repeatable high precision
• Equipped with waste vacuum system
• Stores up to 1.000 sets of data
• Stripping up to 9 steps
• Graphical LCD display
• Compact, easy-to-handle bench top model length
Technical Data
ApplicationCoaxMicro CoaxMicro Triax
Cross. section area 0.005 – 1.5 mm2 (discrete conductor)
Max. insulation diameter 0.5 – 2 mm (0.012 – 0.08 in)
Min. diameter of inner conductors 0.01 mm (0.002 in)
Pull off length max. 40 mm (1.6 in)
Form and Number of bladesSpecial head design with 3 blades and 3 centralizers for high precision
Max. stripping levels 9
Weight 9.2 kg (20.3 pounds)
Machine Dimensions (L x W x H) 140 x 243 x 570 mm (5.5 x 9.6 x 22.4 in)
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
WIRE PREPARATION EQUIPMENT
PAGE 11TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
In case of doubt, we recommend that you have samples made with your wire before making a purchase.
Cosmic 48R and Cosmic 48RX Coaxial Wire Stripping Machines The Cosmic 48R is designed for quick cycle times
whether stripping coaxial or standard wires. With
these extremely versatile features, this will be the
perfect machine for your production.
Function
The Cosmic 48R is an all-electric bench top machine
designed for quick cycle times whether stripping
coax ial or standard wires and can store up to 1.000
different sets of data. This unit uses a triple stepping
motor system to process cable up to nine stages, and
has a 10-phase programmable adjustment for gripping
pressure. The results are highly precise and repeata-
ble. All the parameters required for coax stripping:
stripping length, incision diameter, wayback, pull-back
speed, etc. are displayed on a large LCD screen for
speedier setups.
The Cosmic 48RX shares the features of the
Cosmic 48R but is optimized for semi-flexible cables
Product Features
• Versatile with all-around high precision
• Stripping up to 9 steps
• Graphical LCD display
• Programmable gripper pressure
• Lightweight and portable
• Excellent value for the moneyTechnical Data
ApplicationCosmic 48R Coax, Triax and othermultilayer cables
Cosmic 48RX Semi-flex cables Optimized blade geometry(angeled blades)Optimized cutting parameters(slower blade feed)
Cross. section area 0.013 – 13 mm2 (AWG 36 – 6)
Max. insulation diameter 1.5 – 8 mm (0.08 – 0.3 in)
Min. diameter of inner conductors 0.15 mm (0.006 in)
Pull off length max. 40 mm (1.6 in)
Form and Number of blades 2 rotating blades with centralizer
Max. stripping levels 9
Weight 10 kg (22 pounds)
Machine Dimensions (L x W x H) 136 x 260 x 580 mm (5.35 x 10.2 x 22.8 in)
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 12
Kappa 310 Cutting and Stripping Machine
The Kappa 310 is an ultra-compact high-speed
machine for reliable controlled processing of the
smallest cross-sections from 0.02 mm2 to 6 mm2.
Product Features
• Ultra-fast cutting and stripping for high production
output
• Powerful drive axles for extremely high cable
transport speeds
• Wire feed parts can be changed without tools
• Minimal setup thanks to unique sensors
• Memory for process parameters, including
programmable wire applied pressure valves
• Processing set for short wire lengths starting
from 18 mm
Kappa 315 Cutting and Stripping MachineThe Kappa 315 is fitted with a powerful and robust
blade head and has a processing range that comprises
cross-sections of 0.05 mm2 to 10 mm2.
Product Features
• Precise and robust blade axis
• different blade shapes for the highest stripping
quality
• Wire feed parts can be changed without tools
• Minimal setup time thanks to a unique conductor
detector
• Memory for process parameters, including
programmable wire applied pressure valves
• Processing set for short wire lengths starting
from 30 mm
WIRE PREPARATION EQUIPMENT
PAGE 13TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
Kappa 320 Cutting and Stripping Machine This machine features a number of options and a
powerful blade head. Wire sizes from 0.05 mm2 to
10 mm2 fall within its processing capacity. From this
machine type and higher, all fully automatic cutting
and stripping machines can be controlled and net-
worked via TopWin software to allow inkjet marking.
Product Features
• Broader processing range with a diversity of options
and solutions
• Innovative sensors to aid in setup and to monitor
processing
• Simple operator friendly touch-screen
• Simple integration of additional processing options
• TopWin software for connecting inkjet, part list
production and network solutions
Kappa 322 Cutting and Stripping Machine The real standout feature of the Kappa 322 cutting
and stripping machine is the patented swivel technique
utilized in the wire drive axes. Two different processing
positions can be approached with this feature.
The machine is designed for a wide variety of special
applications or the separation and processing of inside
wires in multi-pole cables.
Product Features
• Broader processing range with a diversity of options
and solutions
• Innovative sensors to aid in setup of cables
• Simple operator friendly touch-screen
• Simple integration of additional processing options
• TopWin software for connecting inkjet, part list
production and network solutions
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 14
Kappa 330 Cutting and Stripping Machine This model is designed for processing cables with a
cross section of up to 35 mm2, multi-core conductors
with an outside diameter of up to 16 mm or flat cables
with a width of up to 40 mm. The customer has his
choice of a belt drive or various double-roller drives
depending on his requirements.
WIRE PREPARATION EQUIPMENT
Kappa 331 U/Coax Precise and flexible cutting and stripping machine with rotary incision The Kappa 331 is a modular cut and strip machine with
a rotating blade module. Round, multilayered cables
– with and without shielding – are precisely stripped
in multiple steps. The machine can be changed over
quickly, making it ideal for flexible use.
Use as universal model The universal-machine with swivel guide offers a wide
range of uses. It allows you to easily program and
precisely process short and long stripping lengths and
individual wires, jacketed cables, coaxial cables and
other multilayered cables. An inkjet marks the cable
near the blade to minimize scrap. Numerous options
expand the processing range even more, e.g., the slit
unit or the feature for processing flat ribbon up to
16 mm.
Use as universal/coax model This model is optimized for the precise processing of
demanding coaxial and triaxial cables with stripping
lengths of up to 60 mm. The highly precise rotating
cutting unit, the independent length measurement
system and the symmetrical layout of drives and
blades combine with the split guides to create
optimum conditions for this task.
Bild fehlt!
Product Features
• Broad range of uses
• Great flexibility thanks to the modular design
• Precise multi-layer stripping
• Your choice of belt or roller drive for optimum force
transmission
• Allows even demanding cables to be stripped
without blade changes
Product Features
• High performance
• Simple operator friendly touch-screen
• Innovative sensors to aid in setup and to monitor
processing
• Minimal wire loss on set up thanks to sensor
monitoring
• Simple integration of delivery and deposit equipment
• TopWin interface
• Networking possibility to customers own network
PAGE 15TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
Use Universal Universal/Coax
Cross section area 0.22 mm2 – 35 mm2 (AWG23 –AWG2)*
Max. outside diamenter 16 mm (0.63 in)
Length range 1 mm – 800000 mm (0.039 in – 875 yd)
Length accuracyRepeat accuracy
±(0.2 % + 1 mm (0.04 in))
Max. stripping lengths
Full stripSide 1: 180 mm (7.09 in)Side 2: 50 mm (1.97 in)Semi/multiple strip-offSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Full stripSide 1: 60 mm (2.36 in)Side 2: 60 mm (2.36 in)Semi/multiple strip-offSide 1: 999.9 mm (39.37 in)Side 2: 60 mm (2.36 in)
Max. wire transport speed 4.0 m/s (157.5 in/s)
Quantity range 1 – 99999
Drive system Double-roller or belt drive
Wire guideSide 1: Swivel guideSide 2: Fixed guide/optional split
Side 1: Split guideSide 2: Split guide
Electrical connection 115/230 V AC ± 10 % 50/60 Hz 680 VA
Compressed air connection 5 – 8 bar / 500 – 800 kPa (73 – 116 psi)
Air consumption < 10 liter per minute
Dimensions (W x H x D) 870 x 380 x 670 mm (34 x 15 x 26 in)
Weight Approx. 100 kg (220 lbs)
Kappa 331 Technical Data
*Applications specific up to 50 mm2
Kappa 350 Cutting and Stripping Machine
This powerhouse with its double-blade principle is
designed for processing round conductors with a cross
section of up to 120 mm2 and a maximum outside dia-
meter of up to 35 mm. The powerful belt drive ensures
gentle processing across the entire cross section range.
The sensors are combined with a length measuring
encoder to provide optimum process monitoring and
accuracy. Zero-cuts are automatically minimized.
Product Features
• High performance
• Simple operator friendly touch-screen
• Innovative sensors to aid in setup and to monitor
processing
• Minimal wire loss thanks to sensor monitoring
• Simple integration of delivery and deposit
equipment
• TopWin interface
• Networking possibility to customers own network
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 16
WIRE PREPARATION EQUIPMENT
* Machines of the Kappa 3xx generation can process many conductors outside the indicated cross section range. Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range. In case of doubt, we are happy to produce samples of your wires.
Applications Kappa 310 Kappa 315 Kappa 320 Kappa 322
Cable cross section, stranded wires*
0.02 mm2 – 6.0 mm2
AWG 34 – AWG 100.05 mm2 – 10.0 mm2
AWG 30 – AWG 70.05 mm2 – 10.0 mm2
AWG 30 – AWG 70.05 mm2 – 16.0 mm2
AWG 34 – AWG 5
Maximum outside diameter
10.0 mm (0.4 in) 10.0 mm (0.4 in) 10.0 mm (0.4 in) 12.0 mm (0.47 in)
Length accuracy±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
Flat cable processingv
Optional 8.0 mm (0.32 in)
Optional 8.0 mm (0.32 in)
Optional 8.0 mm (0.32 in)
Optional 12.0 mm (0.47 in)
Maximum wire transport speed
4.0 m/s (157.5 in/s) 2.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s)
Maximum stripping length
Full stripSide 1: 100 mm (3.94 in)Side 2: 40.0 mm (1.57 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Full stripSide 1: 100 mm (3.94 in)Side 2: 40.0 mm (1.57 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Full stripSide 1: 100 mm (3.94 in)Side 2: 40.0 mm (1.57 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Full stripSide 1: 100 mm (3.94 in)Side 2: 90 mm (3.54 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Noise level < 70 dBA < 70 dBA < 70 dBA < 70 dBA
Drive system Roller Roller Roller Belt/Roller
Electrical connection
110/230 V AC ±10 %50/60 Hz 300 VAC
110/230 V AC ±10 %50/60 Hz 300 VAC
110/230 V AC ±10 %50/60 Hz 520 VAC
110/230 V AC ±10 %50/60 Hz 300 VAC
Pneumatic connection
optional optional optional5 – 8 bar / 500 – 800 kPa(73 – 116 psi)
Dimensions(W x H x D)
465 x 385 x 460 mm(18.3 x 15.2 x 18.1 in)
466 x 385 x 460 mm(18.3 x 15.2 x 18.1 in)
510 x 380 x 470 mm(20 x 15 x 18.5 in)
650 x 380 x 470 mm(25.6 x 15 x 18.5 in)
Weightapprox. 25 kg (55.0 lbs
approx. 25.9 kg (57.0 lbs)
approx. 34 kg (75.0 lbs)
approx. 48 kg (105.8 lbs)
PAGE 17TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
Applications Kappa 330 Kappa 331U Kappa 331U/Coax Kappa 350
Cable cross section, stranded wires*
0.22 mm2 – 35.0 mm2
AWG 24 – AWG 20.22 mm2 – 35.0 mm2
AWG 24 – AWG 20.22 mm2 – 35.0 mm2
AWG 24 – AWG 22.5 mm2 – 120.0 mm2
AWG 14 – AWG 5/0
Maximum outside diameter
16.0 mm (0.63 in) 16.0 mm (0.63 in) 16.0 mm (0.63 in) 35.0 mm (1.38 in)
Length accuracy±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
±[0.2 % +1 mm (0.04 in.)] Repeat accuracy
Flat cable processing
Optional 40 mm (1.6 in)
Optional 40 mm (1.6 in)
Optional 40 mm (1.6 in)
—
Maximum wire transport speed
4.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s) 4.0 m/s (157.5 in/s) 4.8 m/s (189 in/s)
Maximum stripping length
Full stripSide 1: 180 mm (7.09 in)Side 2: 50 mm (1.97 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Full stripSide 1: 180 mm (7.09 in)Side 2: 50 mm (1.97 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Full stripSide 1: 60 mm (2.36 in)Side 2: 60 mm (2.36 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 60 mm (2.36 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 60 mm (2.36 in)
Full stripSide 1: 290 mm (11.42 in)Side 2: 150 mm (5.9 in)Semi stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)Multiple stripSide 1: 999.9 mm (39.37 in)Side 2: 999.9 mm (39.37 in)
Noise level < 70 dBA < 70 dBA < 70 dBA < 70 dBA
Drive system Belt/Roller Belt/Roller Belt/Roller Belt/Roller
Electrical connection
110/230 V AC ±10 %50/60 Hz 680 VAC
110/230 V AC ±10 %50/60 Hz 680 VAC
110/230 V AC ±10 %50/60 Hz 680 VAC
110/230 V AC ±10 %50/60 Hz 1.2 kVA
Pneumatic connection
— — — —
Dimensions(W x H x D)
630 x 365 x 480 mm(24.8 x 14.8 x 18.9 in)
870 x 380 x 670 mm(34 x 15 x 26 in)
871 x 380 x 670 mm(34 x 15 x 26 in)
1090 x 1425 x 890 mm(42.9 x 56.1 x 35.0 in)
Weightapprox. 55 kg (121.3 lbs)
approx. 100 kg (220 lbs)
approx. 100 kg (220 lbs
approx. 270 kg (595.2 lbs)
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT PAGE 18
ApplicationsKappa 310 0.02 mm2 – 6.0 mm2
AWG 34 – AWG 10
Kappa 315 0.05 mm2 – 10.0 mm2
AWG 30 – AWG 7
Kappa 320 0.05 mm2 – 10.0 mm2
AWG 30 – AWG 7
Kappa 322 0.05 mm2 – 16.0 mm2
AWG 34 – AWG 5
Cutting
Cutting pulled strands
Precision cut
Full stripping
Half stripping
Multiple strip stripping
Flat cable processing
Multi conductor cable
Inner conductor processing
Double sheath / Coaxial and triaxial cables
Coaxial and triaxialcable processing
Intermediate strip
Intermediate slitting
Hot stamp marking
Inkjet marking
Sequence processing
WIRE PREPARATION EQUIPMENT
PAGE 19TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
ApplicationsKappa 330 0.02 mm2 – 6.0 mm2
AWG 34 – AWG 10
Kappa 331U 0.05 mm2 – 10.0 mm2
AWG 30 – AWG 7
Kappa 331U/Coax 0.05 mm2 – 10.0 mm2
AWG 30 – AWG 7
Kappa 350 0.05 mm2 – 10.0 mm2
AWG 30 – AWG 7
Cutting
Cutting pulled strands
Precision cut
Full stripping
Half stripping
Multiple strip stripping
Flat cable processing
Multi conductor cable
Inner conductor processing
Double sheath / Coaxial and triaxial cables
Coaxial and triaxialcable processing
Intermediate strip
Intermediate slitting
Hot stamp marking
Inkjet marking
Sequence processing
TE APPLICATION TOOLING /// WIRE PREPARATION EQUIPMENT
tooling.te.com1-1773919-7 / Revised 06-17 © 2017 TE Connectivity Ltd. family of companies. All Rights Reserved. AMP, EYE Check, LITEALUM, OCEAN, RAYCHEM, SOLARLOK, TE Connectivity and TE connectivity (logo) are trademarks. Crimpmatic is a trademark. iButton and MOST are trademarks.Other product and/or crimping names herein might be trademarks of their respective owners.
Let’s ConnectTo learn more about the right TE tooling for your needs, call us a 717-810-2082 or email ToolingSales@te.com
TE Technical Support CenterUSA: 1.800.522.6752Canada: 1.800.522.6752Mexico: +52.55.11.06.0800 Latin/S. America +54.11.4733.2200Germany: +49.6151.607.1999
UK: +44.0800.267666 France: +33.1.34.20.8686Netherlands: +31.73.624.6999China: +86.400.820.6015
Stronger, Smarter, More Reliable Applicator.
If you are looking to increase production and improve crimp consistency, consider adding an OCEAN applicator to your wire crimping process.
The OCEAN applicator’s flexible design is quickly adaptable to a wide variety of terminal configurations and features:
• Tool-less fine adjustment capabilities for wire & insulation crimps
• 3 feed options (mechanical, pneumatic, and servo)
• For additional information download catalog #4-1773460-5 from tooling.te.com.
Waste Not. Want Not.
Whether its time or scrap, in manufacturing everyone knows that waste costs money. With our on-site certification and consultation services, we can help you:
• Reduce downtime• Reduce scrap• Maintain crimp quality• Improve manufacturing efficiency
Connect with us today to learn more.
• E-mail: fieldservicesnorthamerica@te.com• Phone: 800-722-1111 or 717-986-3434• For additional information download catalog
#1-1307619-0 from tooling.te.com.
Recommended