View
4
Download
0
Category
Preview:
Citation preview
WHY YOU SHOULD CONSIDER BUYING A XDP Recreation, LLC Product
Each of the founders of this company, have over 30 years experiencein Outdoor Play and Exercise Equipment – From Backyard Swing Sets to Trampolines to Home Exercise Equipment, in the USA. Strong Steel Tubing, Plastic Resin components and inspected parts with an understanding of the need for Child Safety and Fun, on a very durable product. They raised children, so they have a true understanding.
We are proud of our Swing Set products. Inside the carton are individual swing set components and parts that are individually wrapped, covered and packaged. Nestled tightly together to eliminate the potential ‘travel’ damage that might occur from factory, to retailers DC/Warehouse, to you. We use Blow Molded – Double Wall, 1 piece slides, with a ‘landing’ zone for safe stopping – just like at the School Playground. We weld the top bar to the corner bracket/component to enhance the strength and durability of the FRAMES. Clean and clear holes in the frame assembly for self alignment and easy assembly. Powder coat painted Steel Tubing. UV Protected Plastic Resin components. Detailed Assembly Manuals with complete Customer Service backup, just for you. From Swings to a See-‐Saw to Slides to Gliders and Trapeze Swings, and more. Safety and Fun is combined in all our Products ! Please see more about our products on our website at www.xdp-‐recreation.com .
Thank you for giving us the time to tell you about XDP Recreation Products, with the complete understanding of Child Safety and FUN, built into these Products.
Safety, Quality, FUN ! That’s XDP Recreation, LLC
BLOW MOLDED, 1 pc, Double Wall, Slide with “Landing” Station. Dual
Handrails and Legs
5’ Slide
6’ 6” Slide
“LANDING”Station.
6” above the ground.Like at the playground.
WELDED Corner / Leg Fitting with Self Aligned Hardware
Blow Molded “STAND N SWING” And
Blow Molded Kid Swing with ‘grip’ texture, Non
Slip, on seat area.Both with
Double Loop Chain with “Safe-‐Touch” Chain Cover.
SEE-‐SAW for two, Firmly attached to Frame Leg, with Metal Tube “GRIP” Handles attached to SEAT
FOAM LEG PADDINGFor User Protection on all Legs on XDP Recreation Swing Sets
WHAT WE “DO” and “DON’T DO” – for the SAFETY and good of kids aged 3-‐8
-‐ WE try to create the easiest assembly Process to the Swing Set in General-‐ ONE pc Slide for STRENGTH and Easy Assembly with SAFE “LANDING ZONE” – like
at the School yard. Versus a Multi Pc 1 hour-‐ 20 minutes assembly process JUST FOR A SLIDE that lands kids into the ground jamming their ankles. NOT SAFE !
Or a Multi Pc Slide that has your kids ankles get jammed into the ground to stop them vs a ‘safe landing’ like playground designs and What XDP features – feet 6-‐10” inches above the ground
XDP Slide with LANDING Spot
Multi Piece “Slide” -‐ with more than 15 pcs to assemble – SLIDE only
Imagine if not assembled properly ??
OR a Fold-‐Up Slide that minimizes the strength of the Slide itself as well as challenges the consumer to put it together correctly. SAFE FOR YOUR CHILD ????
Recommended