View
36
Download
10
Category
Tags:
Preview:
DESCRIPTION
guidelines for a wireless communication design engineer to properly choose the right waveguide in the design of the RF system for microwave and satellite communication system
Citation preview
WAVEGUIDE
SPECIFICATIONGUIDE
Where imagination anddesign take shape.
This is an interactive PDF. Please scroll to the table of contents where you can click through to the individual Waveguide product sections.
At the bottom of each page there is a click back link to the table of contents.
Questions? Please E-mail sales@atwall.com or call us at (401) 739-0740.
1
Rigid Rectangular Waveguide page 2 - 8
Circular Waveguide page 9 - 10
Flexible Waveguide page 12 - 14
Standard 2 - 5
Reduced Height 6
Thick Wall 7
Thin Wall 7
Special 8
Seamless 12
Extra 12
Twistable/Non Twistable 13
Double Ridged 14
Double Ridged Waveguide page 11
Square Waveguide page 11
When consistent high quality waveguide tubing is required,leading aerospace, defense, automotive, telecommunica-tions and medical products manufacturers have come torely on A.T. Wall Company. Our Warwick, RI manufacturingfacility employs a cold drawing process yielding aluminum,copper, bronze, Invar and silver waveguide tubes in anextremely wide variety of sizes, wall thicknesses and config-urations. and, as our guarantee of reliability, every shipmentis accompanied with a Quality Assurance Certificationensuring 100% raw material traceability and full chemical certification.
Bottom line...whether you’re working on a new appli-cation or seeking to improve an existing product, putthe imagination and design know how of A.T. Wall towork for you.
Table of Contents
Other Products page 14
Notes and Agents page 15
Guide Window: 6.500 x 3.250" +0.015"Outside Dimensions: 6.660" x 3.410" +0.015"Mean Wall: 0.080" Permissible Displacement 0.008"Stock Length: 144"Corner Radii: Internal: 0.05" Max External: 0.04" Min/0.06" MaxOperatingRange: Nominal Frequency: GHz 1.14 - 1.73OperatingRange: Wavelength: 26.7 - 17.7 CmAttenuation at 1.5Fc for Copper: 0.0052 dB/MPeak Power Rating: 13.5 MW
Guide Window: 5.100 x 2.550" +0.010"Outside Dimensions: 5.260" x 2.710" +0.008"Mean Wall: 0.080" Permissible Displacement 0.008"Stock Length: 144"Corner Radii: Internal: 0.05" Max External: 0.04" Min/0.06" MaxOperatingRange: Nominal Frequency: GHz 1.45 - 2.20OperatingRange: Wavelength: 20.7 - 13.6 CmAttenuation at 1.5Fc for Copper: 0.0075 dB/MPeak Power Rating: 8.29 MW
R14
WG 6
WR 650
NSN/NNO
5985-99-083-0045
5985-99-012-0036
Materials
Copper
Brass 90/10Aluminum Alloy
Aprox. Wt. lb/ft
6.10
6.001.86
Guide Window: 4.300" x 2.150" +0.008"Outside Dimensions: 4.460" x 2.310" +0.008"Mean Wall: 0.080" Permissible Displacement 0.006"Stock Length: 144"Corner Radii: Internal:0.05" Max External: 0.04" Min/0.06" Max OperatingRange: Nominal Frequency: GHz 1.72 - 2.61OperatingRange: Wavelength: 17.7 - 11.5 CmAttenuation at 1.5Fc for Copper: 0.0097 dB/MPeak Power Rating: 5.90 MW
R
WG 8
WR 430
NSN/NNO
5985-99-083-01425985-99-083-01435985-99-012-00385985-99-083-0144
NSN/NNO
5985-99-083-01425985-99-083-01435985-99-012-00385985-99-083-0144
Materials
CopperBrass 70/30
Brass 90/10Aluminum
Aluminum Alloy
Aprox. Wt. lb/ft
4.284.00
4.151.281.28
R 18
WG 7
WR 510
NSN/NNO Materials
Copper
Brass 90/10Aluminum Alloy
Aprox. Wt. lb/ft
5.00
4.851.53
Guide Window: 3.400" x 1.700" +0.005"Outside Dimensions: 3.560" x 1.860" +0.005"Mean Wall: 0.080" Permissible Displacement 0.006"Stock Length: 144" Corner Radii: Internal: 0.05" Max External: 0.04" Min/0.06"MaxOperatingRange: Nominal Frequency: GHz 2.17 - 3.30OperatingRange: Wavelength: 13.6 - 9.10Attenuation at 1.5Fc for Copper: 0.014 dB/MPeak Power Rating: 3.80 MW
R26
WG 9A
WR 340
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
Aprox. Wt. lb/ft
3.423.293.321.041.04
Guide Window: 3.500 x 1.750" +0.005"Outside Dimensions: 3.660" x 1.910" +0.005"Mean Wall: 0.080" Permissible Displacement 0.006"Stock Length: 144" Corner Radii: Internal: 0.05" Max External: 0.04" Min/0.06"Max OperatingRange: Nominal Frequency: GHzOperatingRange: Wavelength:Attenuation at 1.5Fc for Copper: 0.0097 dB/MPeak Power Rating: 5.90 MW
R
WG 9
WR
NSN/NNO
5985-99-083-00555985-99-083-0056
5985-99-083-0057
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
Aprox. Wt. lb/ft
3.523.393.441.071.07
Guide Window: 2.840" x 1.340" +0.005"Outside Dimensions: 3.000" x 1.500" +0.005"Mean Wall: 0.080" Permissible Displacement 0.005"Stock Length: 144" Corner Radii: Internal: 0.05" Max External: 0.04" Min/0.055"MaxOperatingRange: Nominal Frequency: GHz 2.60 - 3.95OperatingRange: Wavelength: 11.5 - 7.60 CmAttenuation at 1.5Fc for Copper: 0.019 dB/MPeak Power Rating: 2.43 MW
R 32
WG 10
WR 284
NSN
5985-99-083-00675985-99-083-00685985-99-012-00435985-99-083-0069
Materials
CopperBrass 70/30
Brass 90/10Aluminum
Aluminum AlloyINVAR 36
Aprox. Wt. lb/ft
2.752.602.700.820.822.50
RIGID RECTANGULARWAVEGUIDEPrecision drawn waveguides for high frequency transmissions.
Standard
2Table of Contents
Guide Window: 2.372" x 1.122" +0.005"Outside Dimensions: 2.500" x 1.250" +0.005"Mean Wall: 0.064" Permissible Displacement 0.005"Stock Length: 144"Corner Radii: Internal:0.04" Max External: 0.04"Min/0.055"Max OperatingRange: Nominal Frequency: GHzOperatingRange: Wavelength: 12.06 CmAttenuation at 1.5Fc for Copper: 0.023 dB/M Peak Power Rating: 1.69 MW
R
WG 11
WR
NSN/NNO
5985-99-083-00725985-99-083-0073
5985-99-083-0074
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
Aprox. Wt. lb/ft
1.861.771.800.570.57
Guide Window: 3.000" x 1.000" +0.005"Outside Dimensions: 3.128" x 1.128" +0.005"Mean Wall: 0.064" Permissible Displacement 0.005"Stock Length: 144"Corner Radii: Internal:0.05" Max External 0.04"Min/0.055"Max OperatingRange: Nominal Frequency: GHzOperatingRange: Wavelength: CmAttenuation at 1.5Fc for Copper: dB/MPeak Power Rating: MW
R
WG 10A
WR
NSN/NNO
5985-99-083-10675985-99-083-1068
5985-99-083-1069
Materials
CopperBrass 70/30
Brass 90/10Aluminum
Aluminum Alloy
Aprox. Wt. lb/ft
2.001.90
1.940.610.61
Guide Window: 1.872" x 0.872" +0.005"Outside Dimensions: 2.000" x 1.000" +0.005"Mean Wall: 0.064" Permissible Displacement 0.004"Stock Length: 144"Corner Radii: Internal: 0.03" Max External: 0.03" Min/0.005"Max OperatingRange: Nominal Frequency: GHz 3.94 - 5.99OperatingRange: Wavelength: 7.60 - 5.13 CmAttenuation at 1.5Fc for Copper: 0.036 dB/MPeak Power Rating: 1.04 MW
R48WG 12
WR 187
NSN/NNO
5985-99-083-00755985-99-083-00775985-99-083-00485985-99-083-0078
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
InvarStainless 304
Aprox. Wt. lb/ft
1.491.421.46.045.0451.361.30
Guide Window: 2.290" x 1.145" +0.005"Outside Dimensions: 2.418" x 1.273" +0.005"Mean Wall: 0.064" Permissible Displacement 0.005"Stock Length: 144"Corner Radii: Internal: 0.04" Max External: 0.03" Min/0.55"MaxOperatingRange: Nominal Frequency: GHz 3.22 - 4.90OperatingRange: Wavelength: 9.10 - 6.12 CmAttenuation at 1.5Fc for Copper: 0.025 dB/M Peak Power Rating: 1.60 MW
R 40WG 11A
WR 229
NSN/NNO
5989-99-012-00445985-99-012-0045
5985-99-012-00465985-99-012-0047
Materials
CopperBrass 70/30
Brass 90/10Aluminum
Aluminum AlloyInvar
Aprox. Wt. lb/ft
1.831.771.790.550.551.67
Guide Window: 1.590" x 0.795" +0.004"Outside Dimensions: 1.718" x 0.923" +0.004"Mean Wall: 0.064" Permissible Displacement 0.004"Stock Length: 144”Corner Radii: Internal: 0.03" Max External: 0.03" Min/0.045"Max OperatingRange: Nominal Frequency: GHz 4.64 - 7.05OperatingRange: Wavelength: 6.12 - 4.25 CmAttenuation at 1.5Fc for Copper: 0.043 dB/MPeak Power Rating: 0.806 MW
R58
WG 13
WR 159
NSN/NNO
5985-99-083-01455985-99-083-01465985-99-012-00495985-99-083-0147
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
Aprox. Wt. lb/ft
1.301.241.260.400.40
Guide Window: 2.000" x 0.667" +0.005"Outside Dimensions: 2.124" x 0.791" +0.005"Mean Wall: 0.062" Permissible Displacement 0.004"Stock Length: 144"Corner Radii: Internal: 0.03"Max External: 0.03"Min/0.05"Max OperatingRange: Nominal Frequency: GHzOperatingRange: Wavelength: CmAttenuation at 1.5Fc for Copper: dB/MPeak Power Rating: MW
RW 12A
WR
NSN/NNO Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
Invar
Aprox. Wt. lb/ft
1.411.341.370.430.431.28
Guide Window: 1.372” x 0.622" +0.004"Outside Dimensions: 1.500" x 0.750" +0.004"Mean Wall: 0.064" Permissible Displacement 0.003"Stock Length: 144"Corner Radii: Internal: 0.03" Max External: 0.03" Min/0.04"Max OperatingRange: Nominal Frequency: GHz 5.38 - 8.18OperatingRange: Wavelength: 5.13 - 3.66 CmAttenuation at 1.5Fc for Copper: 0.058dB/M Peak Power Rating: 0.544 MW
R 70
WG 14
WR 137
NSN/NNO
5985-99-083-00805985-99-083-0081
5985-99-012-00505985-99-083-0082
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
Invar
Aprox. Wt. lb/ft
1.121.071.090.340.341.02
RIGID RECTANGULAR WAVEGUIDE Precision drawn waveguides for high frequency transmissions.
Standard
3 Table of Contents
Guide Window: 0.900" x 0.400" +0.003"Outside Dimensions: 1.000" x 0.500" +0.003"Mean Wall: 0.050" Permissible Displacement 0.0025"Stock Length: 144" Corner Radii: Internal:0.03"Max External: 0.025"Min/0.035"Max OperatingRange: Nominal Frequency: GHz 8.202 - 12.5OperatingRange: Wavelength: 3.66 - 2.42 CmAttenuation at 1.5Fc for Copper: 0.11 dB/M Peak Power Rating: 0.299 MW
R 100WG 16
WR 90
NSN/NNO
5985-99-083-00955985-99-083-00975985-99-012-00525985-99-083-0099
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
NILO 36Silver
Stainless 304
Aprox. Wt. lb/ft
0.510.490.500.160.160.460.580.425
Guide Window: 1.122" x 0.497" +0.004"Outside Dimensions: 1.250" x 0.625" +0.004"Mean Wall: 0.064" Permissible Displacement 0.003"Stock Length: 144" Corner Radii: Internal: 0.03" Max External: 0.03" Min/0.04"Max OperatingRange: Nominal Frequency: GHz 6.58 - 10.0OperatingRange: Wavelength: 4.25 - 3.0 CmAttenuation at 1.5Fc for Copper: 0.079 dB/MPeak Power Rating: 0.355 MW
R 84WG 15
WR 112
NSN/NNO
5985-99-083-00855985-99-083-00865985-99-012-00515985-99-083-0087
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
INVARStainless 304
Aprox. Wt. lb/f
0.950.900.920.290.290.870.300
Guide Window: 0.622" x 0.311" +0.003"Outside Dimensions: 0.702" x 0.391" +0.003"Mean Wall: 0.040" Permissible Displacement 0.0025"Stock Length: 144" Corner Radii: Internal: 0.016"Max External:0.020"Min/0.03"Max OperatingRange: Nominal Frequency: GHz 11.90 - 18.0OperatingRange: Wavelength: 2.42 - 1.67 CmAttenuation at 1.5Fc for Copper: dB/M .18Peak Power Rating: MW .123
R 140
WG 18
WR 62
NSN/NNO
5985-99-083-01005985-99-083-01015985-99-012-0055
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
InvarStainless 304
Aprox. Wt. lb/ft
0.3400.3250.3290.1040.1040.310.29
Guide Window: 0.750" x 0.375" +0.003"Outside Dimensions: 0.850" x 0.475" +0.003"Mean Wall: 0.050" Permissible Displacement 0.0025"Stock Length: 144" Corner Radii: Internal:0.03"MaxExternal: 0.025"Min/0.035"Max OperatingRange: Nominal Frequency: GHz 9.84 - 15.0OperatingRange: Wavelength: 3.00 - 2.00 CmAttenuation at 1.5Fc for Copper: 0.013 dB/M Peak Power Rating: 0.178 MW
R 120WG 17
WR 75
NSN/NNO
5985-99-012-0053
5985-99-012-0054
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
InvarStainless 304
Aprox. Wt. lb/ft
0.480.460.470.150.150.440.21
Guide Window: 0.420" x 0.170" +0.003"Outside Dimensions: 0.500" x 0.250" +0.003"Mean Wall: 0.040" Permissible Displacement 0.0025"Stock Length: 144"Corner Radii: Internal:0.016" Max External:0.02"Min/0.03" MaxOperatingRange: Nominal Frequency: GHz 17.6 - 26.7OperatingRange: Wavelength: 1.67 - 1.13 CmAttenuation at 1.5Fc for Copper: 0.37 dB/MPeak Power Rating: 0.048 MW
R 220WG 20
WR 42
NSN/NNO
5985-99-083-0105
5985-99-012-0060
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
NILO 36Silver
Stainless 304
Aprox. Wt. lb/ft
0.2200.2090.2130.0670.0670.200.220.19
Guide Window: 0.510" x 0.255" +0.003"Outside Dimensions: 0.590" x 0.335" +0.003"Mean Wall: 0.040" Permissible Displacement 0.0025"Stock Length: 144" Corner Radii: Internal: 0.016" Max External:0.02"Min/0.03" MaxOperatingRange: Nominal Frequency: GHz 14.50 - 22.0OperatingRange: Wavelength: 2.00 - 1.36 CmAttenuation at 1.5Fc for Copper: 0.24 dB/MPeak Power Rating: 0.083 MW
R 180WG 19
WR 51
NSN/NNO
5985-99-012-0057
5985-99-012-0058
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum AlloySilver 90/10
InvarStainless 304
Aprox. Wt. lb/ft
0.2800.2660.272
0.0850.0850.380.260.23
Guide Window: 0.340" x 0.170" +0.003"Outside Dimensions: 0.420" x 0.250" +0.003"Mean Wall: 0.040" Permissible Displacement 0.025"Stock Length: 144"Corner Radii: Internal:0.016" Max External:0.02" Min/0.03"MaxOperatingRange: Nominal Frequency: GHz 21.7 - 33.0OperatingRange: Wavelength: 1.36 - 091 CmAttenuation at 1.5Fc for Copper: 0.44 dB/MPeak Power Rating: 0.037 MW
R 260WG 21WR 34
NSN/NNO
5985-99-012-0061
Materials
CopperBrass 70/30Brass 90/10
AluminumAluminum Alloy
InvarStainless 304
Aprox. Wt. lb/ft
0.1840.1750.1780.0560.0560.170.18
Standard
4Table of Contents
Guide Window: 0.224" x 0.112" +0.001"Outside Dimensions: 0.304" x 0.192" +0.001"Mean Wall: 0.040" Permissible Displacement 0.002"Stock Length: 144"Corner Radii: Internal:0.016" Max External:0.02" Min/0.03"Max OperatingRange: Nominal Frequency: GHz 33.2 - 50.1OperatingRange: Wavelength: 0.91 - 0.60 CmAttenuation at 1.5Fc for Copper: 0.81 dB/MPeak Power Rating: 0.016 MW
R 400WG 23
WR 22
NSN/NNO
5985-99-012-0063
Materials
CopperBrass 70/30
Brass 90/10Aluminum
Aluminum AlloySilver
Approx. Wt. lb/ft
0.1470.140
0.1430.0440.0440.137
Guide Window: 0.280" x 0.140" +0.001"Outside Dimensions: 0.360" x 0.220" +0.001"Mean Wall: 0.040" Permissible Displacement 0.002"Stock Length: 144"Corner Radii: Internal: 0.016"Max External:0.02" Min/0.03"Max OperatingRange: Nominal Frequency: GHz 26.4 - 40.1OperatingRange: Wavelength: 1.13 - 0.75 CmAttenuation at 1.5Fc for Copper: 0.58 dB/MPeak Power Rating: 0.025 MW
R 320WG 22
WR 28
NSN/NNO
5985-99-083-0197
Materials
CopperBrass 70/30
Brass 90/10Aluminum
Aluminum AlloyInvarSilver
Approx. Wt. lb/ft
0.1650.157
0.1600.0500.0500.150.171
Guide Window: 0.148" x 0.074" +0.001"Outside Dimensions: 0.228" x 0.154" +0.001"Mean Wall: 0.040" Permissible Displacement 0.002"Stock Length: 144"Corner Radii: Internal: 0.008" Max External:0.02"Min/0.03"Max OperatingRange: Nominal Frequency: GHz 49.9 - 75.8OperatingRange: Wavelength: 0.60 - 0.40 CmAttenuation at 1.5Fc for Copper: 1.50 dB/MPeak Power Rating: 0.007 MW
R 620WG 25
WR 15
NSN/NNO
5985-99-012-0065
Materials
CopperBrass 70/30
Brass 90/10Silver
Approx. Wt. lb/ft
0.1180.112
0.1140.103
Guide Window: 0.188" x 0.094" +0.001"Outside Dimensions: 0.268" x 0.174" +0.001"Mean Wall: 0.040" Permissible Displacement 0.002"Stock Length: 144"Corner Radii: Internal:0.012" Max External: 0.02" Min/0.03"Max OperatingRange: Nominal Frequency: GHz 39.3 - 59.7OperatingRange: Wavelength: 0.75 - 0.50 CmAttenuation at 1.5Fc for Copper: 1.10 dB/MPeak Power Rating: 0.010 MW
R 500WG 24
WR 19
NSN/NNO
5985-99-083-0137
Materials
CopperBrass 70/30
Brass 90/10Silver
Approx. Wt. lb/ft
0.1370.130
0.1330.12
Guide Window: 0.100" x 0.050" +0.001"Outside Dimensions: 0.180" x 0.130" +0.001"Mean Wall: 0.040" Permissible Displacement 0.002"Stock Length: 144"Corner Radii: Internal:0.006" Max External:0.02" Min/0.03"Max OperatingRange: Nominal Frequency: GHz 73.8 - 112.0OperatingRange: Wavelength: 0.40 - 0.27 CmAttenuation at 1.5Fc for Copper: 2.7 dB/MPeak Power Rating: 0.003 MW
R 900WG 27
WR 10
NSN/NNO Materials
CopperBrass 70/30
Brass 90/10Silver
Approx. Wt. lb/ft
0.0700.067
0.0680.069
Guide Window: 0.122" x 0.061" +0.001"Outside Dimensions: 0.202" x 0.141" +0.001"Mean Wall: 0.040" Permissible Displacement 0.002"Stock Length: 144"Corner Radii: Internal:0.006"Max External:0.020"Min/0.03"Max OperatingRange: Nominal Frequency: GHz 30.5 - 92.0OperatingRange: Wavelength: 0.50 - 0.33 CmAttenuation at 1.5Fc for Copper: 2.0 dB/MPeak Power Rating: 0.005 MW
R 740WG 26
WR 12
NSN/NNO
5985-99-083-0140
Materials
CopperBrass 70/30
Brass 90/10Silver
Approx. Wt. lb/ft
0.0800.076
0.0780.091
Guide Window: 0.080" x 0.040" +0.001"Outside Dimensions: 0.160" x 0.120" +0.001"Mean Wall: 0.040" Permissible Displacement 0.002"Stock Length: 144"Corner Radii: Internal: 0.006"Max External: 0.02" Min/0.03"Max OperatingRange: Nominal Frequency: GHz 92.3 - 140.0OperatingRange: Wavelength: 0.33 - 0.22 CmAttenuation at 1.5Fc for Copper: 3.8 dB/MPeak Power Rating: 0.002 MW
R 1200
WG 28
WR 8
NSN/NNO Materials
CopperBrass 70/30
Brass 90/10
Approx. Wt. lb/ft
0.0600.057
0.058
RIGID RECTANGULAR WAVEGUIDE Precision drawn waveguides for high frequency transmissions.
Standard
5 Table of Contents
Type Dimensions in Inches Performance Materials
Designation Inside Dimensions Wall Outside Dimensions Operating Attenu- Peak Power Materials Approx. Wt. Lbs/Ft StockRange ation Rating Length
M Width Height Dev+ Nom. Ecc. Width Height Dev+Copper Brass Alum. Nilo
Copper Brass Alum. Nilo +2"
14 6.500 1.625 0.015 0.05 0.080 0.008 6.660 1.785 0.015 0.04 0.06 1.14 1.73 0.009 6.75 5.32 5.10 1.71 - 144
22 4.300 1.0748 0.008 0.05 0.080 0.006 4.460 1..235 0.008 .0.04 0.06 1.72 2.61 0.0164 2.95 3.45 3.34 1.07 - 14426 3.400 0.8504 0.005 0.05 0.080 0.006 3.560 1.010 0.005 0.04 0.06 2.17 3.30 0.0233 1.90 2.79 2.74 0.847 - 14432 2.840 0.7087 0.005 0.05 0.080 0.005 3.000 0.869 0.005 0.04 0.06 2.60 3.95 0.0306 1.28 2.3 2.23 0.713 - 14440 2.290 0.5709 0.005 0.05 0.064 0.005 2.418 0.699 0.005 0.03 0.05 3.22 4.90 0.0422 0.80 1.48 1.43 0.458 - 144
45 2.000 0.6670 0.005 0.03 0.062 0.004 2.124 0.791 0.005 0.03 0.05 3.70 5.61 0.0430 0.83 1.34 1.30 0.415 - 14448 1.872 0.4685 0.005 0.03 0.064 0.004 2.000 0.597 0.005 0.03 0.05 3.94 5.99 0.0559 0.56 1.23 1.19 0.38 - 144
58 1.590 0.3976 0.004 0.03 0.064 0.004 1.718 0.526 0.004 0.03 0.05 4.64 7.05 0.0728 0.40 1.05 1.01 0.326 - 144
70 1.372 0.3425 0.004 0.03 0.064 0.003 1.500 0.471 0.004 0.03 0.05 5.38 8.71 0.0854 0.30 0.915 0.885 0.283 - 144100 0.900 0.1969 0.004 0.03 0.050 0.0025 1.000 0.297 0.004 0.0250.045 8.20 12.50 0.1931 0.11 0.463 0.450 0.143 - 144
22 4.300 0.5157 0.008 0.05 0.080 0.006 4.460 0.6756 0.008 0.04 0.06 1.72 2.61 0.03018 1.42 3.09 2.98 0.955 - 14426 3.400 0.4094 0.005 0.05 0.080 0.006 3.560 0.5694 0.005 0.04 0.06 2.17 3.30 0.04393 0.90 2.45 2.23 0.76 - 14432 2.840 0.3386 0.005 0.05 0.080 0.005 3.000 0.4986 0.005 0.04 0.06 2.60 3.95 0.05676 0.61 2.07 2.00 0.64 - 14440 2.290 0.2756 0.005 0.05 0.064 0.005 2.418 0.4036 0.005 0.03 0.05 3.22 4.90 0.07765 0.39 1.34 1.29 0.413 - 14448 1.872 0.2244 0.005 0.03 0.064 0.004 2.000 0.3526 0.005 0.03 0.05 3.94 5.99 0.10507 0.27 1.11 1.07 .0342 - 144
58 1.590 0.1969 0.004 0.03 0.064 0.004 1.718 0.3249 0.004 0.03 0.05 4.64 7.05 0.13066 0.20 0.95 0.92 0.294 - 14470 1.372 0.1969 0.004 0.03 0.064 0.003 1.500 0.3249 0.004 0.03 0.05 5.38 8.17 0.1439 0.17 0.84 0.813 0.260 - 144
84 1.122 0.1969 0.004 0.03 0.064 0.003 1.250 0.3249 0.004 0.03 0.05 6.58 10.00 0.1651 .014 0.716 0.693 0.222 - 144
FrequencyRange forDominantMode GHz
FROM TO
dB/m* MWMin. Max.
HC OF 70 90 TIC HT 36HC 30 10 20
CornerRadiusMax.
CornerRadius
Material Approx. Internal Dimensions Internal External Dimensions External Mean Wall Permissable StandardWeight Lb/ll Tolerance+ Tolerance+ Displacement Length
Standard Reduced Height
Copper 2.31 2.840 x .500 .005 3.000 x .660 .005 .080 .006 144Brass 70 /30 2.20Brass 90 /10 2.24Aluminum 0.74
Copper 1.24 1.750 x .500 .005 1.875 x 0.625 .005 .0625 .005 144Brass 70 /30 1.19Brass 90 /10 1.20Aluminum 0.38
Copper 1.11 1.590 x .400 .004 1.718 x .528 .004 .064 .004 144Brass 70 /30 1.06Brass 90 /10 1.08Aluminum 0.33
Copper 0.81 1.491 x .500 .004 1.591 x .660 .004 .050 .004 144Brass 70 /30 0.78Brass 90 /10 0.79Aluminum 0.25
Copper 0.62 1.000 x .400 .004 1.100 x .500 .004 .050 .0025 144Brass 70 /30 0.59Brass 90 /10 0.60Aluminum 0.18
6
Flat & Medium Flat Recduced Heights
Table of Contents
RIGID RECTANGULAR WAVEGUIDE Precision drawn waveguides for high frequency transmissions.
Thick WallMaterial Approx. Internal Dimensions Internal External Dimensions External Mean Wall Permissable Standard
Weight Lb/ll Tolerance+ Tolerance+ Displacement Length
Copper 7.30 3.500 x 1.750 .008 3.820 x 2.070 .008 .160 .015 144
Copper 5.61 3.500 x 1.750 .008 3.750 x 2.000 .008 .125 .010 144
Copper 4.46 2.840 x 1.340 .005 3.090 x 1.590 .005 .125 .008 144Brass 90 /10 4.32Aluminum 1.41
Copper 3.51 2.840 x 1.340 .005 3.040 x 1.540 .005 .100 .0065 144Brass 90 /10 3.40Aluminum 1.07
Copper 2.98 2.372 x 1.122 .005 2.572 x 1.322 .005 .100 .008 144Brass 90 /10 2.90Aluminum .91
Copper 3.15 1.22 x .497 .004 1.496 x 871 .004 .187 .010 144
Thin WallMaterial Internal Dimensions Internal External Dimensions External Mean Wall Standard
Tolerance+ Tolerance+ Length
Aluminum 6061 0.2240 x 0.1120 0.001Copper C101 0.2800 x 0.1400 0.001Silver 90/10 0.3400 x 0.1700 0.002Aluminum 6061 0.5100 x 0.2550 0.002Aluminum 6061 0.6220 x 0.3110 0.002Aluminum 6061 0.7500 x 0.3750 0.002Aluminum 6061 0.7500 x 0.3750 0.003Aluminum 6061 0.7500 x 0.3750 0.001Aluminum 6061 0.7500 x 0.3750 0.003Aluminum 6061 0.7500 x 0.3750 0.003Aluminum 6061 0.9000 x 0.4000 0.003Aluminum 6061 0.9000 x 0.4000 0.003Aluminum 6061 0.9000 x 0.1500 0.001Aluminum 6061 1.1220 x 0.4970 0.004Aluminum 6061 1.1220 x 0.4970 0.004Aluminum 6061 1.3720 x 0.6220 0.002Aluminum 6061 1.5900 x 0.7950 0.004Aluminum 6061 2.2900 x 1.1450 0.005Aluminum 6061 2.8400 x 1.3400 0.006Aluminum 6061 3.4000 x 1.7000 0.006
7
Copper (note 2 and 2a), Brass 70/30 (note 3), Brass 90/10 (note 4), Aluminum (note 5).
0.2640 x 0.1520 0.002 0.0200 720.3200 x 0.1400 0.001 0.0200 1200.4200 x 0.2500 0.003 0.0200 1440.5500 x 0.2950 0.003 0.0200 1440.6620 x 0.3510 0.003 0.0200 1440.7820 x 0.4070 0.003 0.0160 1440.7900 x 0.4150 0.003 0.0200 1440.8000 x 0.4250 0.001 0.2500 1440.7800 x 0.4050 0.003 0.0150 1440.7900 x 0.4150 0.003 0.0200 1440.9400 x 0.4400 0.003 0.0200 1440.9500 x 0.4500 0.003 0.0250 1440.9620 x 0.2120 0.002 0.0310 1441.1860 x 0.5610 0.004 0.0320 1441.1620 x 0.5370 0.004 0.0200 1441.4360 x 0.6860 0.002 0.0320 1441.6540 x 0.8590 0.004 0.0320 1442.3540 x 1.2090 0.005 0.0320 1442.9300 x 1.4300 0.006 0.0450 1443.4800 x 1.7800 0.006 0.0400 144
Table of Contents
SpecialMaterial Approx. Internal Dimensions Internal External Dimensions External Mean Wall Permissable Standard
Weight Lb/ll Tolerance+ Tolerance+ Displacement LengthCopper 2.50 3.000 x 1.750 .005 3.128 x 1.878 .005 .064 .006 144Brass 70 /30 2.38Brass 90 /10 2.42Aluminum 0.76
Copper 1.86 2.500 x 1.000 .003 2.628 x 1.128 .003 .064 .006 144Brass 70 /30 1.78Brass 90 /10 1.80Aluminum 0.58
Copper 2.36 2.150 x 1.340 .003 2.310 x 1.500 .003 .080 .005 144Brass 70 /30 2.24Brass 90 /10 2.28Aluminum 0.75
Copper 1.62 2.000 x 1.000 .003 2.128 x 1.128 .003 .064 .004 144Brass 70 /30 1.54Brass 90 /10 1.57Aluminum 0.51
Copper 0.94 1.000 x .750 .002 1.100 x .850 .002 .050 .003 144Brass 70 /30 0.88Brass 90 /10 0.91Aluminum 0.29
Copper 0.48 .728 x .400 .001 .828 x .500 .001 .050 .0025 144Brass 70 /30 0.46Brass 90 /10 0.47Aluminum 0.14
Copper 0.33 .630 x .280 .001 .710 x .360 .001 .040 .0025 144Brass 70 /30 0.32Brass 90 /10 0.33Aluminum 0.10
Copper 0.31 .562 x .250 .001 .642 x .330 .001 .040 .0025 144Brass 70 /30 0.30Brass 90 /10 0.31Aluminum 0.09
Copper 0.36 .529 x .279 .001 .625 x .375 .001 .048 .0025 144Brass 70 /30 0.33Brass 90 /10 0.35Aluminum 0.11
Copper 0.24 .500 x .250 .001 .572 x .322 .001 .036 .0025 144Brass 70 /30 0.23Brass 90 /10 0.24Aluminum
Copper 0.81 1.000 x .500 .002 1.125 x .625 .002 .0625 .003 144Brass 70 /30 0.77Brass 90 /10 0.79Aluminum 0.25
Copper 0.58 1.000 x .500 .001 1.096 x .596 .001 .048 .0025 144Brass 70 /30 0.55Brass 90 /10 0.56Aluminum 0.17
Copper 0.57 .895 x .395 .001 1.000 x .500 .001 .0525 .0025 144Brass 70 /30 0.55Brass 90 /10 0.56Aluminum 0.17
Copper 0.52 .774 x .400 .001 .874 x .500 .001 .050 .0025 144Brass 70 /30 0.49Brass 90 /10 0.50Aluminum 0.16
Copper 0.56 .763 x .375 .001 .875 x .487 .001 .056 .0025 144Brass 70 /30 0.53Brass 90 /10 0.54Aluminum 0.16
Copper 0.24 .415 x .165 .001 .500 x .250 .001 .0425 .002 144Brass 70 /30 0.23Brass 90 /10 0.24Aluminum 0.07
Copper 0.12 .280 x .110 .001 .340 x .170 .001 .030 .002 144Brass 70 /30 0.11Brass 90 /10 0.12Aluminum 0.04
Copper 0.17 .275 x .135 .001 .360 x .220 .001 .0425 .002 144Brass 70 /30 0.16Brass 90 /10 0.17Aluminum 0.05
Copper 0.09 .180 x .090 .001 .240 x .150 .001 .030 .002 144Brass 70 /30 0.08Brass 90 /10 0.09Aluminum
8Table of Contents
++–++–
++–++–
++–++–
–
–
CIRCULARWAVEGUIDEPrecision drawn waveguides for high frequency transmissions.
CircularInside Outside Theoretical Cut Off Frequency in GHz for the Mode Weight in Lbs/Foot
Type Cross Section Dev.+ Wall Cross Section AttenuationDesignation Basic Thickness Basic Dev.+ In dB/m In the
Diameter Diameter H..(TE..) Modeat 1.21c H11(TE11) E01(TM01) H21(T21) H01(TE01) H02(TE02) Copper Brass Alum.
9
* These figures are temporary values subject to revision.For subsequent study.
ECC
C14 6.181 .0062 0.00564 1.20 1.46 1.86 2.33 4.26 – – –
C16 5.280 .0052 0.00715 1.31 1.71 2.17 2.73 4.99 – – –
C18 4.511 .0045 0.130* - 4.772 .005* 0.00906 1.53 2.00 2.54 3.19 5.84 7.30 7.03 2.15
C22 3.853 .004 0.130* - 4.114* .004* 0.0115 1.79 2.34 2.98 3.74 6.84 6.26 6.03 1.85
C25 3.292 .0032 0.130* 3.551 .004* 0.0140 2.10 2.74 3.49 4.37 8.01 5.38 5.18 1.59
C30 2.812 .0028 0.130 .010 3.072 .0035 0.0184 2.46 3.21 4.08 5.12 9.37 4.63 4.45 1.36
C35 2.403 .0024 0.130 .010 2.663 .0035 0.0233 2.88 3.76 4.77 5.99 11.00 3.98 3.84 1.17
C40 2.047 .002 0.100 .007 2.247 .0035 0.0297 3.38 4.41 5.61 7.03 12.90 2.60 2.50 0.76
C48 1.750 .0017 0.100 .007 1.950 .0030 0.0375 3.95 5.16 6.56 8.23 15.10 2.24 2.16 0.66
C56 1.500 .0015 0.080 .005 1.660 .0030 0.0473 4.61 6.02 7.65 9.06 17.60 1.53 1.47 0.45
C65 1.281 .0013 0.080 .005 1.441 .0030 0.0599 5.40 7.05 8.96 11.20 20.60 1.32 1.27 0.39
C76 1.094 .0011 0.065 .004 1.224 .0030 0.0759 6.32 8.26 10.5 13.2 24.1 0.91 0.88 0.27
C89 .938 .0009 0.065 .004 1.068 .0025 0.0956 7.37 9.63 12.2 15.3 28.1 0.79 0.76 0.23
C104 .797 .0008 0.050 .003 .897 .0025 0.1220 8.68 11.3 14.4 18.1 33.1 0.51 0.48 0.16
C120 .688 .0007 0.050 .003 .788 .0025 0.1524 10.0 13.1 16.7 20.9 38.3 0.45 0.43 0.14
C140 .594 .0006 0.040 .002 .674 .0020 0.1893 11.6 15.2 19.3 24.2 44.4 0.31 0.30 0.10
C165 .500 .0005 0.040 .002 .580 .0020 0.2459 13.8 18.1 22.9 28.8 52.7 0.26 0.25 0.08
C190 .438 .0045* 0.040 .518 .0020 0.3003 15.8 20.6 26.2 32.9 60.2 0.23 0.22 0.07
C220 .375 .00038* 0.030 - .435 .0020 0.3787 18.4 24.1 30.6 38.4 70.3 0.15 0.14 0.05
C255 .328 .00033* 0.030 - .388 .0020* 0.4620 21.1 27.5 35.0 43.9 80.4 0.13 0.12 0.04
C290 .281 .00028* 0.030 - .341 .0020* 0.5834 24.6 32.2 40.8 51.2 93.8 0.11 0.10 0.03
C330 .250 .00025* 0.020 - .290 .0020* 0.6938 27.7 36.1 45.9 57.6 105.0 0.065 0.062 0.02
C380 .219 .00025* 0.020 - .259 .0020* 0.8486 31.6 41.3 52.4 65.7 120.0 0.058 0.055 0.018
C430 .188 .00025* 0.020 - .228 .0020* 1.0650 36.8 48.1 61.0 76.6 140.0 0.050 0.048 0.015
C495 .172 .00025* 0.020 - .212 .0020* 1.2190 40.2 52.5 66.7 83.7 153.0 0.046 0.044 0.014
C580 .141 .00025* 0.020 - .181 .0020* 1.6430 49.1 64.1 81.4 102.0 187.0 0.039 0.037 0.012
C660 .125 .00025* 0.015 - .155 .0020 1.967 55.3 72.3 91.8 115.0 211.0 0.025 0.024 0.008
C765 .109 .00025* 0.015 - .139 .0020* 2.413 63.5 82.9 105.0 132.0 242.0 0.023 0.022 0.007
C890 .094 .00025* 0.015 - .124 .0020* 3.001 73.6 96.1 122.0 153.0 280.0 0.019 0.018 0.006
++–
++–
++
++
Table of Contents
Circular Standard Circular Non-StandardIntermediate
Type Values forDesignation Basic Inside
Diameter153 IEC Inches
Approximate Outside Inside Tolerance Mean Permissable StandardMaterial Weight lb/ft Diameter Dimeter Outside and Wall Displacement Stock LengthInside
C14.1 5.945C14.7 5.709C15.3 5.492C16.5 5.079C17.2 4.882C17.9 4.685C19.4 4.331C20.1 4.173C20.9 4.016C22.7 3.701C23.6 3.559C24.5 3.425C26.6 3.165C27.7 30.39C28.7 2.9291C31.1 2.7008C32.3 2.5984C33.7 2.4961C36.4 2.3071C37.8 2.2205C39.4 2.1339C42.7 1.9685C44.4 1.8937C46.2 1.8189C49.9 1.6850C51.8 1.6220C53.9 1.5591C58.3 1.4409C60.6 1.3858C63.2 1.3307C68.2 1.2323C70.9 1.1850C73.9 1.1378C80.0 1.0512C83.1 1.0118C8601 0.9764C93.2 0.9016C97.0 0.8661C101 0.8307C109 0.7677C114 0.7420C118 0.7146C127 0.6634C129 0.6396C136 0.6161C148 0.5689C154 0.5453C161 0.5217C174 0.4843C179 0.4685C186 0.4528C198 0.4236C207 0.4055C219 0.3819C232 0.3630C239 0.3512C248 0.3394C266 0.3157C277 0.3039C288 0.2921C308 0.2732C317 0.2654C327 0.2567C348 0.2417C359 0.2339C372 0.2260C398 0.2110C414 0.2031C429 0.1949C457 0.1839C467 0.1799C478 0.1760C512 0.1642C539 0.1559C568 0.1480C613 0.1370C632 0.1331C651 0.1291C696 0.1209C721 0.1165C746 0.1126C799 0.1051C831 0.1012C876 0.0961
Copper 2.98Brass 70/30 2.87 3.000 3.160 .005 .080 .005 144Aluminum 0.91Copper 2.27Brass 70/30 2.19 2.872 3.000 .005 .064 .005 144Aluminum 0.69Copper 4.45Brass 70/30 4.24 2.750 3.000 .005 .125 .010 144Aluminum 1.34Copper 2.08Brass 70/30 2.01 2.629 2.757 .005 0.64 .005 144Aluminum 0.64Copper 4.23Brass 70/30 4.08 2.619 2.875 .005 .125 .010 144Aluminum 1.29Copper 1.98Brass 70/30 1.88 2.461 2.589 .005 .064 .005 144Aluminum 0.60Copper 1.72Brass 70/30 1.66 2.160 2.288 .005 .064 .005 144Aluminum 0.52Copper 2.01Brass 70/30 1.92 2.000 2.160 .005 .080 .005 144Aluminum 0.61Copper 0.84Brass 70/30 0.81 1.022 1.150 .002 .064 .004 144Aluminum 0.26Copper 0.65Brass 70/30 0.62 1.000 1.100 .002 .050 .004 144Aluminum 0.20Copper 0.50Brass 70/30 0.48 1.000 1.080 .002 .040 .0025 144Aluminum 0.15Copper 0.58Brass 70/30 0.56 0.900 1.000 .002 .050 .0025 144Aluminum 0.18Copper 0.89Brass 70/30 0.85 0.875 1.030 .002 .0775 .004 144Aluminum 0.27Copper 0.74Brass 70/30 0.70 0.875 1.000 .002 .0625 .0025 144Aluminum 0.23Copper 1.60Brass 70/30 1.54 2.000 2.128 .004 .064 .004 144Aluminum 0.49Copper 0.87Brass 70/30 0.83 1.516 1.612 .004 .048 .004 144Aluminum 0.26Copper 1.11Brass 70/30 1.06 1.375 1.503 .003 .064 .004 144Aluminum 0.34Copper 0.79Brass 70/30 0.75 1.266 1.362 .003 .048 .004 144Aluminum 0.24Copper 0.97Brass 70/30 0.93 1.187 1.312 .002 .064 .004 144Aluminum 0.30Copper 0.53Brass 70/30 9.51 1.178 1.250 .002 .036 .0025 144Aluminum 0.16Copper 0.94Brass 70/30 0.89 1.129 1.257 .002 .064 .004 144Aluminum 0.28Copper 0.84Brass 70/30 0.81 1.026 1.154 .002 .064 .004 144Aluminum 0.25Copper 0.41 0.800 0.880 .002 .040 .0025 144Brass 70/30Copper 0.58 0.675 0.803 .002 .064 .0025 144Brass 70/30Copper 0.31 0.600 0.680 .002 .040 .0025 144Brass 70/30Copper 0.44 0.500 0.628 .002 .064 .0025 144Brass 70/30Copper 0.25 0.488 0.568 .002 .040 .0025 144Brass 70/30Copper 0.34 0.375 0.500 .002 .0625 .0025 144Brass 70/30Copper 0.19 0.284 0.375 .002 .0455 .0025 144Brass 70/30Copper 0.14 0.250 0.330 .001 .040 .002 144Brass 70/30Copper 0.06 0.210 0.250 .001 .020 .002 144Brass 70/30Copper 0.07 0.203 0.250 .001 .0235 .002 144Brass 7/30
10Table of Contents
SQUAREWAVEGUIDEPrecision drawn waveguides for high frequency transmissions.
Square
DOUBLE RIDGEDWAVEGUIDEPrecision drawn waveguides for high frequency transmissions.
Square
TypeDesignation
WRDSuggested
Frequency RangeTE10 Mode
A B C D E FmMax
G+ 10% H
Frequency Rangein GHz For
Dominant ModeBasic Wall ThicknessBasic Width
and Heighta-b
MaximumRadius ofCorner r,
Deviations InWidth andHeight +
Inside Cross-Section
Basic Width and Height
a-b
Radius of Corner r,Deviations InWidth andHeight +
Outside Cross-Section
Frequencyin GHz
Maximum Value
TheoreticalValue
Attenuation in dB/m
153 IEC
Q 41 3.59 4.29 1.8898 0.0038 0.03 0.080 2.0496 0.0038 0.04 0.06 4.060 0.0273 0.0354Q 49 4.31 5.15 1.5748 0.0032 0.03 0.080 1.7346 0.0032 0.04 0.06 4.872 0.0358 0.0466Q 54 4.79 5.73 1.4173 0.0028 0.03 0.080 1.5772 0.0028 0.04 0.06 5.413 0.0420 0.0546Q 61 5.39 6.44 1.2598 0.0025 0.03 0.080 1.4197 0.0025 0.04 0.06 6.090 0.0501 0.0651Q 65 5.75 6.87 1.1811 0.0024 0.03 0.080 1.3409 0.0024 0.04 0.06 6.496 0.0552 0.0717Q 70 6.16 7.36 1.1024 0.0022 0.03 0.064 1.2303 0.0022 0.03 0.05 6.960 0.0612 0.0796Q 75 6.63 7.93 0.0236 0.0020 0.03 0.064 1.1516 0.0020 0.03 0.05 7.495 0.0684 0.0889Q 85 7.50 8.96 0.9055 0.0018 0.03 0.064 1.0335 0.0020 0.03 0.05 8.473 0.0822 0.107Q 100 8.84 10.57 0.7677 0.0015 0.03 0.064 0.8957 0.0020 0.03 0.05 9.993 0.105 0.137Q 115 10.14 12.12 0.6693 0.0013 0.015 0.050 0.7693 0.0020 0.026 0.045 11.46 0.129 0.168Q 130 11.49 13.74 0.5906 0.0012 0.015 0.050 0.6906 0.0020 0.02 0.04 12.99 0.156 0.203
From Minimum MaximumTo
750
650
580
475
180
7.50 – 18.00
6.50 –
5.80 – 16.0
4.75 – 11.00
18.00 – 40.00
.691"+ .003"
.720"+ .003"
.780"+ .003"
1.09"+ .003"
.288"+ .003"
.321"+ .003"
.321"+ .003"
.370"+ .003"
.506"+ .003"
.134"+ .003"
.791"+ .003"
.820"+ .003"
.880"+ .003"
1.190"+ .003"
.368"+ .003"
.421"+ .003"
.421"+ .003"
.470"+ .000"
.606"+ .003"
.214"+ .003"
.136"+ .002"
.101"+ .002"
.120"+ .002"
.215"+ .002"
.057"+ .002"
.020"
.010"
.020"
.030"
.015"
.027"
.022"
.043"
.043"
.011"
.173"+ .002"
.173"+ .002"
.200"+ .002"
.272"+ .002"
.072"+ .002"
11Material – 6063 aluminum
Material – Copper, Aluminum, Brass, Bronze, Invar
Table of Contents
FLEXIBLEWAVEGUIDEPrecision drawn waveguides for high frequency transmissions.
Millimeter Seamless Flexible Waveguide
EIA WRSize
DEF SizeWG
FrequencyRange (GHz)
Peak PowerKillowatt
Compression/ElongationPer Inch
AveragePowerWatts
MaximumPressure
PSIG
VSWR * Insertion Loss
MSNS Seemless Electro-Formed
TYPICAL ELECTRICAL SPECIFICATIONS
10 27 75.00 - 110.00 1.15 0.25 30 2.512 26 60.00 - 90.00 1.12 0.20 40 3.815 25 50.00 - 75.00 1.10 0.11 50 5.719 24 40.00 - 60.00 1.10 0.08 60 1022 23 33.00 - 50.00 1.10 0.05 75 1228 22 26.50 - 40.00 1.10 0.04 150 20
EIA WRSize
DEF SizeWG E Plane H Plane
Min. Centerline Bend Radius (degrees/inches)
TYPICAL MECHANICAL SPECIFICATIONS
10 27 100 50 20 0.0512 26 100 50 20 0.0515 25 90 45 15 0.0519 24 75 35 12 0.0222 23 50 30 10 0.0228 22 40 25 10 0.02
Extra Flexible Waveguides
VSWRFrequencyRange (GHz)
EIA WRSize
Min. CenterlineBend Radius (inches)Peak
PowerMTES
*Insertion Loss Average Power Watts
TYPICAL ELECTRICAL / MECHANICAL SPECIFICATIONS
22 33.0 - 50.0 1.35 1.20 1.00 25 75 12 0.50 0.8028 26.5 - 40.0 1.30 0.60 0.50 75 150 20 0.50 0.8034 22.0 - 33.0 1.30 0.60 0.50 100 200 30 0.60 0.9042 18.0 - 26.5 1.20 0.35 0.32 100 300 39 0.60 0.9051 15.0 - 22.0 1.20 0.35 0.32 200 500 70 0.70 1.3062 12.4 - 18.0 1.12 0.20 0.15 400 1000 100 0.70 1.3075 10.0 - 15.0 1.12 0.15 0.13 750 1500 140 0.80 1.60
MCES MTES E Plane H PlaneMCES
12
VSWR is per 2 Foot Section *INSERTION LOSS is dB per foot with silver plated waveguide. Extra-Flexible may be used where a more flexible application would prove beneficial.MTES = Extra Flexible/Twistable MCES = Extra Flexible/Non-Twistable Electrical: V.S.W.R. specifications shown are full band (frequency range). Lower values are attainable over narrower bandwidths. Finish: Flexible waveguide is silver-plated per QQ-S-365. Jacket: Flexible waveguide assemblies include a protective molded Neoprene rubber coating to the exterior of the waveguide. An optional polysulfide brush-on jacket may be supplied on all sizes.
* INSERTION LOSS is dB per foot with silver plated waveguide. Electrical: Specifications shown are full band (frequency range). Lower values are attainable over narrower band-widths. Jackets: Brush applied polysulfide rubber jackets per MIL-S-8802 are standard. Silicone rubber jackets per MIL-S-23586 available on special request. Flanges: Flanges areattached to the flexible waveguide in conformance with MIL-STD-1866 using solder per QQ-S-571. Finish: Interior of flexible waveguide is silver-plated per QQ-S-365.
Table of Contents
FLEXIBLE WAVEGUIDE Precision drawn waveguides for high frequency transmissions.
Twistable and Non-Twistable
FrequencyRange (GHz)
EIA WRSize
MSBS Seamless BrassMSDS Seamless Berylliun CU
*VSWR
MCKSFlexible Non-Twistable
MTPSFlexible/Twistable
TYPICAL ELECTRICAL SPECIFICATIONS
22 33.00 - 50.00 1.35 1.00 1.35 1.2028 26.50 - 40.00 1.30 .50 1.30 0.6034 22.00 - 33.00 1.20 0.35 1.30 0.50 1.30 0.3542 18.00 - 26.50 1.20 0.32 1.20 0.35 1.20 0.3051 15.00 - 22.00 1.20 0.32 1.20 0.35 1.20 0.3062 12.40 - 18.00 1.12 0.15 1.12 0.20 1.12 0.1575 10.00 - 15.00 1.12 0.13 1.12 0.15 1.10 0.1290 8.20 - 12.40 1.10 0.09 1.10 0.10 1.10 0.09102 7.00 - 11.00 1.10 0.08 1.10 0.09 1.10 0.06112 7.05 - 10.00 1.09 0.06 1.10 0.01 1.10 0.06137 5.85 - 8.20 1.09 0.05 1.09 0.07 1.10 0.05159 4.90 - 7.05 1.08 0.04 1.09 0.06 1.10 0.04187 3.95 - 5.85 1.08 0.03 1.09 1.05 1.09 0.03229 3.30 - 4.90 1.07 0.02 1.07 0.02 1.08 0.02284 2.60 - 3.95 1.07 0.02 1.07 0.02 1.08 0.02340 2.20 - 3.30 1.07 0.01 1.07 1.01 N/A N/A430 1.70 - 2.60 1.07 0.01 1.07 0.01 N/A N/A650 1.12 - 1.70 1.06 0.01 N/A N/A N/A N/A
**Insertion Loss *VSWR *VSWR **Insertion Loss**Insertion Loss
EIA WRSize
With JacketBend Radii to Centerline CW Power in Watts
TYPICAL MECHANICAL SPECIFICATIONS POWER HANDLING CAPABILITIES
22 0.75 1.13 0.44 0.94 75 25 1228 0.75 1.13 0.44 0.94 150 75 2034 0.75 1.13 0.44 0.94 200 100 3042 0.88 1.25 0.57 1.00 300 100 3951 0.88 1.25 0.57 1.00 500 200 7062 1.00 1.88 0.69 1.25 1,000 400 10075 1.13 2.25 0.63 1.25 1,500 750 14090 1.75 2.50 1.25 1.50 3,000 1,000 180102 2.00 2.88 1.30 1.94 4,000 1,500 300112 2.25 3.25 1.40 1.82 4,000 1,500 315137 2.38 3.38 1.50 2.07 5,000 2,000 500159 4.00 6.00 1.60 2.25 6,000 2,500 1,100187 4.38 6.50 1.94 3.00 6,500 3,000 1,250229 6.50 8.00 2.13 3.25 8,000 4,000 1,550284 7.00 9.50 2.94 5.50 10,000 4,000 2,000340 10.00 16.00 4.25 6.00 16,000 8,000 3,700430 12.00 25.00 4.82 6.63 20,000 10,000 4,700650 20.00 40.00 14.00 28.00 20,000 N/A 10,700
E Plane E PlaneH Plane H Plane MTP
Peak Power InKilowatts
MCK/MSB/MSDWithout Jacket
Mechanical Specifications are for Non-Twistable Flexible Waveguide.Tighter Radii can be accomodated with Seamless Flexible Waveguide.See other Data Sheets for Double-Ridged and Millimeter Flexible Waveguide.
*VSWR is per 2 Foot Section.**Insertion Loss is in dB per Foot with silver plated waveguard.
See “Millimetre Flex” Data SheetSee “Millimetre Flex” Data Sheet
13 Table of Contents
Double - Ridged Flexible Waveguide
FrequencyRange (GHz)
EIA WRDSize
MSBS Seamless Brass***MSDS Seamless Berylliun CU
*VSWR
MCKSFlexible Non-Twistable
MTPSFlexible/Twistable
TYPICAL ELECTRICAL SPECIFICATIONS
180 18.00 - 40-00 1.50 1.00 N/A N/A 1.50 1.00650 6.50 - 18.00 1.20 0.25 1.20 0.35 1.20 0.25750 7.50 - 18.00 1.20 0.25 1.20 0.35 1.20 0.20580 5.80 - 16.00 1.20 0.20 1.20 0.25 1.20 0.20475 4.75 - 11.00 1.20 0.15 1.20 0.25 1.20 0.15350 3.50 - 8.20 1.20 0.15 1.20 0.25 1.20 0.15200 2.00 - 4.80 1.15 0.10 1.15 0.15 1.15 0.10
**Insertion Loss *VSWR *VSWR **Insertion Loss**Insertion Loss
EIA WRDSize
With JacketBend Radii to Centerline CW Power in Watts
TYPICAL MECHANICAL SPECIFICATIONS POWER HANDLING CAPABILITIES
180 0.75 1.13 0.50 0.90 150 50 2.75650 1.75 3.00 .75 1.50 600 200 12750 1.75 3.00 .75 1.50 750 250 16580 1.75 3.00 .75 1.50 1000 300 30475 2.00 3.50 0.90 1.70 1500 500 40350 3.00 5.00 1.75 2.25 2000 800 73200 4.00 7.00 2.13 3.25 4000 1500 225
E Plane E PlaneH Plane H Plane MTP
Peak Power InKilowatts
MCK/MSB/MSDWithout Jacket
Mechanical Specifications are for Flexible Waveguide.Tighter Radii can be accomodated with Seamless Flexible Waveguide.
*VSWR is per 2 Foot Section.**Insertion Loss is in dB per Foot with silver plated waveguard.
***Beryllium - Copper is also available.
14
SINGLE RIDGEDWAVEGUIDEPrecision drawn waveguides for high frequency transmissions.
FLEXIBLE WAVEGUIDECOMPOUNDSPrecision drawn waveguides for high frequency transmissions.
Single Ridged Waveguides alsoavailable. Please send an illustrationwith dimensions for a quotation.
Flexible Waveguide compounds alsoavailable. Please send an illustrationwith dimensions for a quotation.
Table of Contents
1. The lengths quoted are nominal only.Lengths shorter than the nominal length maybe supplied.
2. Copper. Oxygen – free electronic grade toASTM B75-95 / Copper UNS NO. C10100
3. Brass. 70 % Copper 30% Zinc:Composition to ASTM B 135 – 96 / CopperUNS NO. C26000
4. Brass. 90% Copper 10% Zinc: Compositionto ASTM B 372 – 93 / Copper UNS NO.C22000
5. Aluminum. 1100, 3003, 6061 and 6063shall conform to the chemical composition lim-its of ASTM B 210
6. Invar “36” UNS NO. K 93603 Nominalcomposition 36% Nickel, 64% Iron is an alloywhich exhibits low thermal expansion proper-ties.
7. Stainless Steel 304 UNS NO. S30400Austenitic Cr – Ni Stainless Steel. Other gradesof Stainless are available, specify at time oforder placement.
8. Coin Silver 90% Silver 10% Copper:Composition to ASTM B 617-93 / Coin SilverUNS NO. P07900
Material
Aluminum Alloy 1100 to ASTM B 210Aluminum Alloy 3003 to ASTM B 210Aluminum Alloy 6061 to ASTM B 210Aluminum Alloy 6063 to ASTM B 210
Copper C10100 to ASTM B 75-95Brass C26000 to ASTM B 135 –96Brass (Bronze) C22000 to ASTM B 372
Silver, Coin (90.0 % Silver 10%) to ASTM B617– 93 Composition Only / UNS NO. P07900
Where imagination anddesign take shape.55 Service Avenue, Warwick, RI 02886 USAwww.atwall.com Tel: (401) 739-0740 Fax: (401) 732-5784 E-mail: sales@atwall.com
A.T. WALL COMPANY SALES AGENTS INTERNATIONALNOTES
Area
EuropeanCentral StockingDistributor
Great Britian
Italy
Norway
SwedenFinlandDenmark
Spain
GermanyAustriaSwitzerlandPolandCzechTurkey
Israel
India
France
ChinaTaiwanHong Kong
Company (mail)
Cole Tubes LtdFishponds CloseWokingham, BerkshireRG41 2QAUnited Kingdom
Cole Tubes Ltd
Piemmegi Metalli S.rLPiazza IV Novembre, nr. 4 20124 Milan Italy
ODD TVEDT & CO ASDamsgardsveien 59P.O. Box 2356Solheimsviken5824 BergenNorway
COMPOMILL ABP.O. Box 2065194 02 UpplandsVasbySweden
Manimport, S. L.Clementina Arderiu, 4808980 Sant Feliu deLlobregatSpain
Aura International S.A.Le Charlebourg-Bat.D14-30 Rue de Mantes92700 ColombesFrance
RCM ltd.7 Imber StreetPetach Tikva 49511Israel
Deltronic MarketingCorp.P.O. Box 1544Secunderbad 500-003India
Aura International S.A.Le Charlebourg-Bat.D14-30 Rue de Mantes92700 ColombesFrance
Dorado Co. (HK)Rm. 403, Lee Kiu Bldg51, Jordan Rd.Kowloon Hong Kong
Personnel
Mark TurStewart Phillips
Mark TurStewart Phillips
Aldo Pozzi
Jonny Tvedt
Torbjorn Carlsson
Carlos Quintana
Barbara Mueller
Giyora Elgar
Dev Khushlani
Barbara Mueller
Kelvin Kwok
Phone
+ (44) 118 977 6006
+ (44) 118 977 6006
+ (39) 0267382335
+ (47) 55 59 98 90
+ (46) (0) 8 590 740 00
+ (34) 077879136
+ (33) 1 56 83 72 20
+ (972) -3-9229006
+ (91) 40 27731530+ (91) 40 27732993
+ (33) 1 56 83 72 20
+ (852) 2770 2021
Fax
+ (44) 118 977 3105
+ (44) 118 977 3105
+ (39) 0267382208
+ (47) 55 59 98 99
+ (46) (0) 8 590 319 00
+ (34) 936 662247
+ (33) 1 56 83 00 27
+ (972) -3-9218885
+ (91) 40 27732864+ (91) 40 27731248
+ (33) 1 56 83 00 27
+ (852) 2385 9907
mttur@tubeco.comsphillips@tubeco.comcole@tubeco.com
mttur@tubeco.comsphillips@tubeco.comcole@tubeco.com
pmgmet@tiscalinet.it
oddtvedt@online.no
tbc@crossnordic.se
cquinta@retemail.es
Bmueller @auraint.com
rcm@bezeqint.net
dmci@hd1.vsnl.net.in
Bmueller @auraint.com
Dorado01@netvigator.com
Table of Contents
Recommended