View
19
Download
3
Category
Preview:
Citation preview
W204、W207、W212ELV Replace
CG-MB
Connect the power, USB cable OBD connection device
The vehicle is replaced with a used or new ELV
1. Used ELV
OBD connects auto ,open software,click 'Read ELV Data '
please connect the clip on the yellow line of the OBD line to the K-line on the directional lock plug.
Read the data successfully,show the related information
ELV is normal and can do repairing
Get ELV erase password
Erase the ELV success
Read ELV data again,to display related information after erasing
2.Whole new ELV
After reading the whole new ELV data,the related information is showed as above,you can do following operations without wiping ELV data.
Collect and calculate anti-theft passwords
Read EIS Data
Enter“computer password”,choose ''copy key with key”(If you lost all stuff,you can choose '' copy key without key”)
Default "other keys", click ''OK''
The collection process will not be described one by one, follow the software prompts, eventually you can get the anti-theft password .
Copy and paste the password to ELV
Save ELV data(Please default file name)
Get erase password successfully
Click ''wipe the EIS '',It will shows ''please insert the simulation key into the EIS in 30 seconds''
Picture for operating physical goods
Erase the EIS success
Read EIS data again to show related information
Load the origin data(the ELV data saved initially)
Click '' write EIS data''
please insert the simulation key into the EIS in 30 seconds
Picture for operating physical goods
Write EIS data success
Read EIS data again to show related information
Click“sync w204 ELV”,when it shows sync w204 ELV success, please insert key into EIS for activation
Activated successfully , can be used normally
Recommended