View
221
Download
1
Category
Preview:
Citation preview
VALVESfOR AIR PROCESS
Guaranteed reliability, resistance and sealing in every Rimor valves series
more themes with one partner
ValvesValvole
UnConventional Air Design
in the picture, the thermal-fluid dynamic analysis and the study of a round valve seal.
Valves are available in standard or custom sizes and a wide range of operatives temperature, materials, tightness level and sealing capacity.
SEAL CLASSES
VALVES FEATURES
GENERAL FEATURES:
• Sizes up to 1500 mm of diameter and special realisation on customer’s request• Profiles cut with high precision lazer • Maintenance intervention reduced to minumum• Products realised following the Normative FCI 70-2
In addition, Rimor provides to thermal-fluid dynamics and structural simulations for the valves. It has been collected experiences about valve regulation, seal and torque.
CLASS INo seal
Metal seats seal with reinforcement
CLASSE II (Kvs < 0,5)CLASSE III (Kvs < 0,1)
CLASS IIIPacking seal
Fluxal seal(for seals)
Fluxal seal(for seats cleaning)
Based on the flat/seats seal requirements and on the operative conditions, Rimor fulfil round valves with the following seal classes: (flat-blue, seats-grey)
METAL TYPE IIMETAL TYPE III
0 TYPE PACKING TYPE FLUXAL TYPE CLEANER TYPE
RimoR VALVES modELS
round mono series round double series
diverter inverter
dapò
square simply and heavy
dapò
round atex series
kniferound and square
bypass
diverter
moVEmEnT TypES
Rotating electricLinear pneumatic
Linear eletric Rotating pneumatic
or handwheel gearbox
Valve’s movement can be reached through a manual, electric or pneumatic system:
ConTRoL And FEEdBACK TypES End-STRoKE
The valve can give the feedback signal with 0-10V o 4-20 mA. Based on the chosen actuator, there are different ways to control the valve:
ELECTRIC CONTROL:
• 3 lines control ON/OFF• 0-10V o 4-20 mA modulating
Operation time 90° : 6-210 s
PNEUMATIC CONTROL:
• 3 ways control ON/OFF• 0-10V o 4-20 mA modulating
Operation time 90° : 1-12s
TEmpERATURE And pRESSURE CLASSES
Dimensional and material planning choices are based on the valve’s temperature and pressure operative conditions. Below there are different temperatures and pressures classes with the related values.
SECURiTy And EmERGEnCy SySTEmSSEAL SySTEmS
PNEUMO SAFEvalve with pneumatic
closing system
SAFE ELECTRIC valve with electric closing system
Handwheel gearbox
On lever gearbox
P4Fino a 50000 Pa
P1Fino a 5000 Pa
P2Fino a 10000 Pa
P3Fino a 20000 Pa
Pa
T1Fino a 350°C
T2Fino a 550°C
T3Fino a 700°C
T4Fino a 800°C
T5Fino a 900°C
T6Fino a 1000°C
°C
maTERIalS USED:
FE 360, AISI 304, AISI 316, AISI 310, AISI 321, MANGANESE, CORTEN, REFRACTORY.
Fe 360
Corten
AISI 304
AISI 316
AISI 321
AISI 310
350°
450°
700°
800°
900°
1000°
PRESSURE CLASSES AVAILABLE
TEMPERATURES CLASSES AVAILABLE WITH THE POSSIBLE MATERIALS USES
ROTO MANUAL LEVER PNEUMO LINEAR PNEUMO ROTO ELECTRO LINEAR ELECTRO ROTO
Packing seal on spring
FLUXED TYPE0 TYPE
Nitrogen fluxed seal (N2)Grease fluxed seal
INDUCTIVE IP 68
RID ON PNEUMATIC PISTON
MECHANIC
Valvole_EN_01
Rimor S.r.l. Via Luigi Santagata, 43-10156 Torino (Italia) Tel +39 011 2238561 Fax +39 011 2238750 E-mail: info@rimor.eu www.rimor.eu
- automotive - chemical & pharmaceutical - energy / compost / syngas / biomasses - foundry & furnaces
- glass processing
- thermal processing - oil / gas - printing & converting - trims suction & shredding
ENGINEERING - PRODUCTION - DISTRIBUTION
Target industry
Our competences more themes with one partner
Rimor follows you along the entire process
Industrial fan and furnace agitatorsVentilatori industriali e agitatori per forni
Soundproof fans Rotocabe©Ventilatori insonorizzati Rotocabe©
ValvesValvole
Air filteringFiltrazione aria Soundproof cabine
Cabine afonePlants for metal surfaces treatment
Impianti per il trattamento delle superfici metalliche
Recube system©, energy recovery unit for ventilation and heating
Sistema Recube©, unità di ventilazione e riscaldo a recupero
Automotive testingAutomotive testing
Transport and trims shreddingTrasporto e granulazione rifili
Conditioning and umidity removal unitPackage condizionamento e abbattimento umidità
Plants and maintenanceImpianti e assistenza manutentiva
PowerboardQuadri elettrici
Engineering and simulationsProgettazione e simulazioni
Distribution and consultingDistribuzione e consulenza
Master distributor and consultant
• Settoreautomotive,camereclimatiche,testingsolution• Settorecementolaterizi• Settoreventilazionegallerieeminiere• Settoreprintingeconverting• Settoreforniefonderie• Settoreaspirazioneegranulazioneinlineadirifilidifilmplastici• Settorelavorazionevetro• Settoreenergia-emissioni-rifiuti• Settorebiomasse
Recommended